User's Manual SP-5100


Add to my manuals
30 Pages

advertisement

User's Manual SP-5100 | Manualzz

SP-5100

User’s Manual

Using the Instruction Manual

Congratulations on your purchase of this stage piano!

The piano is an user friendly piano with fabulous sound quality and advance feature such as scale practise and MIDI controller. No matter you are adult or children, you will enjoy playing the piano as it provides amazing styles for accompaniment, expressive tones, and real time record. Other features such as lesson function, variety of songs will help you better master the playing skil.

This piano also provide with SD card function, you can choose your favorate MIDI song to play;You can also backup your recording setting to SD card.

You are recommended to study this manual carefully before using the unit.

Precautions

Please read the following carefully before use:

Do not expose the piano to high temperature, direct sunlight and excessive dusty places.

Do not place the piano too close to other electrical appliances such as television and radio. It may cause interference.

Do not place the piano to excessive humid area. Avoid putting container with liquid on top of the piano in order to prevent damage of the internal parts of the piano by flowing liquid.

Always unplug AC cord by gripping the plug firmly, but not pulling on the cable.

Do not apply excessive force to the switches and buttons.

When the piano is not in use or in the time of thunderstorm, please disconnect the power supply.

Avoid adjusting the volume level to the maximum or to the levels that you feel uncomfortable, we recommend you to limit the volume level to two-thirds of the max for preventing the damage of audiory sense.

Unplug the power cable before cleaning the piano. Do not connect or disconnect the power cable with a wet hand.

Check and clean the power plug periodically.

To avoid damages, turn off the power switches before you disconnect the related devices from the piano.

Clean the piano and remove the dust with a dry soft cloth or a slightly damp cloth.

Never use cleaners such as thinner or alcohol. To prevent any damage on the surface of the LED display, please use lens cleaning tissue to clean the display.

If the piano cable is damaged, please do not use the piano. Otherwise it may cause fire or electrical hazard.

In case of malfunction due to improper handling the piano, please switch off and on again after 30 seconds.

Do not attempt to disassemble or repair the piano. If the piano does not work properly, please contact the approved repairer.

The piano should not be exposed to dripping or splashing.

2

Conent

Main Feature

General Guide

Control Panel

The Connectors

- Power Jack

- Headphones Jack

- AUX OUTJack

- Sustain/Soft Jack

- MIDI IN/OUT Jack

Operation

- Power on & Master Volume

- Song

- Voices and Effects

- Metronome

- Style Control

- Record

- Lesson

- SD Function

MIDI

- MIDI Controler

- Command

- Channel

- Value

- MIDI OUT

- What is MIDI

Specifications

Voice List

Style List

Song List

MIDI Implementation Chart

3

9-19

9

9

10

15

15-16

17-18

18

18-19

20-24

20

21

22

23

23

24

25

26

26

6

7-8

7

7

7

8

8

27

28-29

4

5

Main Feature

Note:

1. Pressing "+" and "-" together when turning on the piano will put all volume back to default setting.

2. "

*

": There is a standard SD external Interface which supports the cards of 16M ¨ 2G capacity. It is compatible with the file system format of the FAT 16 / 32 only

4

General Guide

3

Top View

4

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

Rear View

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

5 6 7 8 9 10 11 12

3

4

1

2

5

6

CONTROL PANEL

MUSIC STAND

HEADPHONES JACKS

PIANO KEYBOARD

POWER JACK

AUX OUT L / MONO

7

8

9

10

11

12

AUX OUT R

AUX IN

SUSTAIN PEDAL JACK

SOFT PEDAL JACK

MIDI IN/OUT JACKS

USB JACK

5

Control Panel

2 11 12 13 14 15 16

3 4 5 6 7 8 9 10 17 18 19 20

1

21

9

10

7

8

3

4

1

2

5

6

11

12

13

POWER SWITCH

BRILLANCE

MASTER VOLUME

START/STOP

ACC.VOL

FILL A/FILL B

RECORD

PLAY/STOP

TRACK 1/SONG MELODY OFF

TRACK 2

TRANSPOSE +/-

TEMPO +/-

MIDI CONTROL

- MIDI OUT

- COMMAND

- VALUE

- CHANNEL

22 23 24 25 26 27

14

15

16

STYLE

VOICE

+ & -

VOICE DIRECT SELECT BUTTONS

17

18

19

20

21

22

23

24

25

26

27

SONG

SCALE

DUAL

SPLIT

REVERB/CHORUS

TOUCH

METRONOME

SD CONTROL

- PLAY

- STORE

SD SLOT

6

Power Jack

This piano can be powered from a standard household wall outlet by using the specified AC adaptor.

The power jack is located on the rear panel of the piano body.

Make sure that only the AC adaptor specified for this piano is used.

The adaptor shall be 12V DC output, and center positive type.Make sure to turn off the piano before you connect the adaptor into the AC wall outlet and the cord into the unit.

Cautions£

Use of another type of adaptor creates a danger of fire and electrical shock.For safety sake, make sure to unplug

the AC adaptor from the wall outlet whenever leaving the

piano unattended for a long time or during a thunderstorm.

Setting Music Rest

The piano is supplied with a music rest that can be attached to the instrument by inserting it into slot at the rear of the control panel.

Please set up the music rest as shown.

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

Headphones Jack

1¡

2¡

When an optional set of stereo headphones is connected with the headphones jack 2, the sound from speakers will switch off automatically resulting in only the sound from headphone to be heard.

When jack 1 is connected with the stereo headphones, the sound can be heard from both headphones and speakers of the piano.

Headphones

Jack 1

Headphones

Jack 2

Never use the headphone with high volume, as it may hurt your sense of hearing.

To prevent the damage of the speakers, ensure that the volume is set to the minimum level before connecting the power and other devices.

AUX OUT Jack

When you want to listen to the voice with an amplifier, connect amplifiers to the AUX OUT L/MONO and R jacks on the rear panel. The volume is adjusted with the

VOLUME button. (For monaural playback, use the L/

MONO jack. For stereo playback, connect both L/

MONO and R jacks.)

To avoid damaging the speakers, please ensure that volume has set to the minimum level before connecting the power and other devices.

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

7

AUX IN Jack

The audio output from a CD player/iPod connected to the AUX IN jack on the rear panel can be mixed with the sound of the piano brain. This function is convenient when you want to play along with a favourite song.

The volume of the external signal is adjusted with the VOLUME button.

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

Sustain Jack

An optional footswitch can be plugged into the SUSTAIN jack for sustain control. The footswitch function is like the sustain pedal on a piano.

Step the sustain pedal on to open the SUSTAIN function , it will apply SUSTAIN effect to the piano, then release the sustain pedal to turn off the effect.

Soft Jack

An optional footswitch can be plugged into the SOFT jack for soft control. Step on the soft pedal , all notes played on the keyboard have a soft effect.

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

12V AUX OUT AUX IN PEDAL

L/MONO R SUSTAIN SOFT

MIDI IN MIDI OUT USB

MIDI IN/OUT Jack

MIDI stand for Musical Instrument Digital Interface.

MIDI is a world wide standard that makes it possible for various electronic musical instruments and other devices.

MIDI IN:

Data transmitted from other MIDI instrument via MIDI is received by this terminal.

MIDI OUT:

Data produced by the Digital Piano is transmitted to other MIDI instruments via MIDI from this terminal.

USB Jack

Connect PC or other USB host devices that support

USB Audio.

You can simply connect the PC and the piano with a USB cable. For PC that has installed Windows XP, the USB driver for the piano would be automatically installed as a USB Audio Device. After the PC informed you that the driver for the piano has been properly installed, you can choose the USB Audio

Device in the audio device menu of the control panel or the MIDI software you are using to ransfer MIDI data to the piano.

Note:

USB connection can only be detected with

Windows XP and Vista ¡

8

12V AUX OUT AUX IN PEDAL

L/MONO

R

SUSTAIN SOFT

MIDI IN MIDI OUT USB

Power on & Master Volume

1¡

Press the [POWER] switch. The LED display lightens up.

2¡ Slide the [VOLUME] bar rightwards, the whole volume increase, slide it leftwards, the whole volume decreases.

3¡

Press the [+] and the [-] button synchronously, and then power on the piano. it can reset all the setting to the default value and erase the record data.

Press the power switch on

VOICE

STYLE SONG

MIN

VOLUME

MAX

The level decreases The level increases

+

Press the power switch on

Press together

Automatic shutdown

If you haven‘t used the digital piano for 30 minutes, it will automatically turn off. To turn it on again, press the POWER button twice.

If you want to temporarily disable this feature, just keep the 1st left white key pressed while turning the piano on. Use the same procedure to enable this feature again.

NOTE:

If the LED display has not lightened up after you power on the piano, please check the power supply.

If the piano is silent, the volume may be adjusted to its minimum level.

Although Mains switch is in OFF position, the piano is not disconnected from the power supply completely!

Song

There are 60 songs in total. (See Appendix 3 ).

1¡

PLAY a song:

Press the [SONG] button to enter the song mode, the

SONG flag on LED is lightened. It will play all songs repeatedly in a cycle.

STYLE VOICE

SONG

Enter the song mode and play all songs circlely.

VOICE STYLE

SONG

Song flag is lightened

Press the [START/STOP] button to stop playing the song, but it will not quit the song mode. The 2nd time you start playing the song by pressing the [START

/STOP] button, it will play current song repeatedly.

Press first to stop playing the song, press again to play current song repeatedly.

9

2¡

SELECT a song:

Use the [+] or [-] button to select the song you want.

If you select the new song, LED will display it's number at first and then display introductory beat and the measure count.

3¡

INTRODUCTORY BEAT:

After pressing [START/STOP] , the measure count begins from negative value to 1, and then begins to play the song.

4¡

Press the [TRACK1] button to enter self-learning mode, and turn on/off the main melody of the song.

5¡

While the song stop playing, you can press the [VOICE] and the [STYLE] button to exit.

The beat LED indicators are lightened in turn.

VOICE STYLE SONG

Select a song

VOICE STYLE

SONG

Display the measure count

STYLE

The LED indicator is lightened.

VOICE

Voices and Effects

There are 20 voices in total (See Appendix 1).

1¡

Voice Select

When power is on, LED lightens the VOICE flag and displays the 001 voice number.

2¡

Press the [VOICE] button to enter the voice mode,

LED displays the VOICE R1 number.

3¡

Press the [DUAL] button to enter the dual voice mode,

LED displays the VOICE R2 number.

4¡ you can select other voice by pressing the [+] and the

[-] or voice Direct Select buttons.

STYLE

SONG

SONG

VOICE

Select a voice

Exit the song mode

VOICE STYLE

SONG

Display VOICE R1

VOICE STYLE

SONG

Display VOICE R2

Use Direct Select buttons to select

There are 10 voices Direct Select buttons to select 20 voices. Each Direct Select button can be used to choose

2 different voices.

Press the first time to select upper layer voice , press the second time to select the lower layer voice.

When you select the upper layer voice, the upper layer indicator turns on.

When you select the lower layer voice, the lower layer indicator turns on and the upper layer indicator turns off.

10

Press the first time to select GRD.PIANO

Press the second time to select BRT.PIANO

1¡

Dual

The piano has dual voice. You can create the new sound through this function for richer and punchier sounds. you can get two different sounds at the same time when pressing one key in the right area in the keyboard.

2¡

Press the [DUAL] button to turn on the DUAL mode, the VOICE flag on the LED and the indicator are both lightened. The dual voice number is also displayed on the LED.

Then, you can get two different sounds at the same time when you press one key on the keyboard.

3¡

Use the [+] / [-] button and voice Direct Select buttons

to select your desired voice. The default voice number is 007.

4¡

Press the [DUAL] button again to turn off the DUAL mode, the indicator goes off.

NOTE:

While the keyboard is in split mode, only the right hand area can respond the dual voice, the left hand not below split point would respond.

Turn on the DUAL voice

Eg. Piano

STR. TRIO

VOICE STYLE

SONG

The indicator goes off.

VOICE STYLE

SONG

Voice flag is lightened

Two voices will sound at the same time.

Select a dual voice

Split Point

You can split the piano to melody and chord area by this function.

1¡

Press the [SPLIT] button, LED displays the current split parameter XXX .

The indicator is flashing.

VOICE STYLE SONG

Display split parameter

2¡

Use the [+] / [-] button or Keyboard to change it, after exit the setting mode the new value becomes to the new split point, the split default value is 34.

VOICE STYLE SONG

Default split point F#3

Change split point

3¡

The new split point belongs to the left area of the keyboard.

11

Chord area

Melody area

Transpose

1¡

You can change the pitch of the entire keyboard by semitone steps with TRANSPOSE function.

2¡

Press the [TRANSPOSE +] or [TRANSPOSE -] button for the first time, LED displays current transpose value temporarily.

3¡

Press [TRANSPOSE +] to increase the value and Press

[TRANSPOSE -] to decrease the value, the maximal range to be adjusted is from -12 to +12 semitones, the default value is 000.

4¡

In TRANSPOSE setting , press the [TRANSPOSE +] and [TRANSPOSE -] button simultaneously to set the value to default.

NOTE:

If you don't press any button for 2 seconds in transpose setting mode, it will quit this mode automatically.

- TRANSPOSE +

- TEMPO +

- TRANSPOSE + - TEMPO +

VOICE STYLE SONG

Display current transpose value

- TRANSPOSE +

increase the value

- TRANSPOSE + - TEMPO +

Decrease the value

VOICE STYLE SONG

Display default transpose value

Touch

This function allows you to turn on the dynamic level when playing the keyboard.

1¡ When power is on , the TOUCH indicator lightened.

Press the [TOUCH] button continuously to select the touch response type, the TOUCH indicator flashes and displays touch response type 00X temporarily on LED.

2¡

There are 4 touch response types. Press [TOUCH] button repeatedly to select, the default is 002.

3¡

If the type is set as OFF, it means no touch response to keyboard, the TOUCH indicator goes off.

NOTE:

If you don't press anybutton for 2 seconds in touch response type select mode,it will quit this mode automatically.

12

The indicator flashes

VOICE STYLE

SONG

Display touch value

VOICE STYLE

SONG

VOICE STYLE

SONG

Select touch response type

Reverb/Chorus

Reverb/chorus effect will enhances the piano with fuller and expressive sound.

1¡

When power is on , the Reverb/chorus indicator is on.

2¡

Press the [REVERB/CHORUS] button to switch the

DSP response setting.

3¡

Press [REVERB/CHORUS] repeatedly to switch to reverb or chorus setting mode.

4¡

There are 32 level to be selected by pressing [+] and [-] button. The default chorus level is 00, the default reverb level is 08.

VOICE STYLE SONG

Display touch value on the LED

VOICE STYLE

SONG

VOICE STYLE SONG

VOICE STYLE SONG

Brilliance

When the piano is power on:

Push [BRILLANCE] splider bar to right, it sounds brighter ;

Push [BRILLANCE] splider bar to left, it sounds more gloomy;

You can change the piano brilliance as your wish.

For a mellower sound For a brighter sound

13

Scale

This function allows you to experience different scales when you play certain genres of music that is not composed based on twelve equal interval.

1¡

Press [SCALE] button to enter into scale mode and the button indicator lights up; The default scale is 001

Pythagor.

2¡

There are 6 types of scale to select:

Pythagor, Major, Minor, Meantone, Werckmei, kirnberg.

Enter scale mode and the indicator lights up.

VOICE STYLE SONG

Display scale type.

Types of scale :

Number Name

1 Pythagor

2 Major

3 Minor

Number Name

3¡

Press [SCALE] button again to exit scale mode and the button indicator goes off.

4¡ Hold and press [SCALE] for 2 seconds to enter into

SCALE select status. The scale now flashes and the scale number displayed on LED.

Press the button again to exit scale mode. The indicator goes off.

Press and hold the button for

2 seconds to enter scale select status. The indicator is flashing.

5¡

Use [+] or [-] to select the scale type, play the key from

C7~B7 to select scale root.

VOICE

STYLE SONG

Select the scale type

C7 B7

For Example, to select the scale named "Minor" and set the root key to "G", Press "+" till "003" is displayed on the LED, then press the G7 key for 3 seconds to set the root, LED displays "G", "G" stands for "Scale Root".

Press the G7 key

VOICE STYLE

SONG

Display scale root.

14

Metronome

1¡ Press the [METRO] button to turn on the metronome and the metronome sound will be played.

2¡

Press the button again to turn off the metronome.

3¡

When the style stops to play, the beat type follows 4/4 after turning on the metronome.

When the style begins to play, the beat type follows the current style.

Metronome can be turned on

together with the style.

The LED indicator is lightened.

4¡

Metronome can be turned on together with the style.

If the style plays at first, then to turn on the metronome, the metronome will respond next measure.

If the metronome plays at first, then to start to play the style, the metronome responds at once to the first beat of the style.

Style Control

There are 20 styles in total. (See APPENDIX 2).

STYLE SELECT

1¡

Press the [STYLE] button to enter style mode, the style number and style flag on the LED are both lightened.

STYLE

SONG

VOICE

VOICE STYLE

SONG

The beat LED indicators are lightened in turn.

VOICE STYLE

SONG

Style number

Style flag

2¡

You can use the [+] / [-] button to select the style you want.

VOICE STYLE

SONG

Start/Stop The Style

1¡

When the style is not playing, you can press the

[START/STOP] button to enter SYNC START

"

mode, the beat point are flashing at the same time, now the style will be start with A.B.C. on if you press the key in the chord area on Piano.

2¡

Press the [START/STOP] button again to stop style play and turn off the A.B.C. function at the same time.

START

/STOP

ACC

VOL

Enter " SYNC START " mode

Select the style

Chord area

VOICE STYLE

SONG

The beat LED indicators are flashing at the same time.

15

FILL IN A/B

1¡

In NORMAL mode, press the [Fill A / Fill B] button to insert 1 measure fill and the Fill A / Fill B indicator is flashing, after one measure is over, VARIATION

Style will be returned.

2¡

In Variation mode, press the [Fill A / Fill B] button to insert 1 measure fill and the Fill A / Fill B indicator is flashing, after onemeasure is over,

NORMAL style will be returned.

Style is not playing:

START

/STOP

ACC

VOL

Preset style mode is NORMAL mode, the indicator is off.

Style is playing:

START

/STOP

ACC

VOL

The indicator is flashing, after a measure is over, the indicator is on, enter VARIATION mode.

3¡ When power is on, the preset style mode is NORMAL mode.

START

/STOP

ACC

VOL

Accomp Volume

1¡

Press the [ACC VOL] button, LED displays the current volume temporarily.

START

/STOP

ACC

VOL

The indicator is on.

START

/STOP

ACC

VOL

Press and enter VARIATION

mode, the indicator is on.

START

/STOP

The indicator is flashing, after a measure is over, the indicator is off, enter NORMAL mode.

START

/STOP

ACC

VOL

ACC

VOL

VOICE STYLE SONG

Display current volume.

2¡

You can use the [+] / [-] button to adjust the volume from 0 ~ 31. (Default Accomp Value is 24) The ACC

VOL indicator is flashing at the same time.

Adjust the volume

VOICE

STYLE SONG

3¡

When power is on, the ACC VOL indicator is on.

The indicator is flashing.

START

/STOP

ACC

VOL

4¡ In ACC VOL mode, press the [+] and [-] buttons synchronously can mute the accompaniment, the ACC

VOL indicator goes off at the same time; If you press the [+] and [-] buttons again synchronously can open the accompaniment, the ACC VOL indicator is lightened at the same time.

Tempo

1¡ Use the [TEMPO+] or [TEMPO-] button to adjust the tempo from 30 to 280.

2¡

Press the [TEMPO+] and [TEMPO-] synchronously to set to the default tempo.

3¡

When the style is not playing, it will take out the default tempo of the style if you select the style.

When the style is playing, it will keep the current tempo once you change the style.

16

VOICE STYLE SONG

- TRANSPOSE +

START

/STOP

ACC

VOL

- TEMPO +

Press them together.

The indicator goes off.

VOICE STYLE

SONG

Adjust the tempo from 30~280.

Display current tempo

- TRANSPOSE + - TEMPO +

Press them together.

VOICE STYLE

SONG

Display default tempo.

Record

There is one user song can be recorded, include

2 Melody Tracks.

Record Song

1¡

Waiting for recording:

Press the [RECORD] button for the first time to enter

the record mode.

NOTE:

The recorded data will not be lost when you turn off the power.

Hold on the [+] and [-] button together and power on the piano, it will

erase all the recorded data.

Enter the record mode, the indicator is flashing.

The RECORD indicator flashes, four beats flashes synchronously to indicate waiting for recording.

At the same time an empty track will be selected to be

recorded automatically and relative track flag flashes

(the selection order is Track 1, Track 2, the Track 1 will

be selected while neither the tracks is empty )

Select the record track, the indicator will flash.

You also can press the [TRACK 1] or [TRACK 2] button to select the track you want to record.

2¡

Start recording:

When 4 beats flashes on LED, you can play the keyboard directly to start recording, the RECORD indicator and track flag that you select both flashes.

Play the keyboard to start recording.

VOICE STYLE

SONG

Four beats flashes synchronously to indicate waiting for recording.

The indicator turns on.

The indicator will still flash.

When 4 beats flashes , you can also press the

[START/STOP] button, open the A.B.C. and start record.

Press the key in the left area and sync start style, then

style data are recorded to the correspond track.

START

/STOP

ACC

VOL

Open A.B.C. and start record

Chord area

If the two tracks all have style data, it will be overwrited by the new data.

NOTE: when entering record mode, the old data of the selected track will lost.

3¡

Stop recording:

Press the [RECORD] button for the second time to stop recording. LED display and indicator get back

to the previous mode.

If the capacity is full while recording, the recording will be stopped automatically with the FUL display on LED.

The indicator is off.

The indicator turns on.

VOICE STYLE

SONG

Get back to previous mode.

VOICE

STYLE SONG

17

Playback Song

1¡

Press the [PLAY/STOP] button for the first time to playback the record data, you can choose any one track or all two tracks to play, the indicator is on.

Enter the record playback mode, the indicator is on.

Then, select the track, the indicator is on.

2¡

Press it for the second time or press the [START/STOP] to stop playback.

START

/STOP

ACC

VOL

Stop playback record.

Stop playback record.

3¡

You can press the [TRACK 1] and [TRACK 2] button to turn on or off the relative track in process of playback.

NOTE:

If there is no record data when you press [PLAY/STOP]

LCD will display "NUL" temporarily.

Press "+" and "-" together when power is on and the song data will be cleared.

Lesson

STYLE VOICE

Turn on or off the track.

VOICE STYLE SONG

1¡

In song mode, press the [TRACK1] button to enter the lesson mode.

SONG

Enter the song mode.

2¡

When you press the [TRACK1] button, the [TRACK1] indicator turns on, it will mute the melody of the song, then you can play the Piano to practise the song you want.

Play the keyboard to practise the song, and the melody of the song will be muted.

3¡ Press [TRACK1] again and melody will save, the

[TRACK1] indicator again goes off.

Exit the lesson mode, the indicator turns off.

Enter the lesson mode, the indicator turns on.

SD Function

There is a standard SD external interface which supports the cards of 16M ~ 2G capacity. It is compatible with the file system format of the FAT 16/32.

Press one of the 2 SD buttons [PLAY], [STORE] to enter the relative function mode.

If there is no card, "ERR" will display 2 seconds.

SD SLOT

VOICE STYLE SONG

18

1¡

SD card function

PLAY can play midi file at the root directory in SD, support format 0 and format 1.

STORE can save the recorded data to SD root directory as midi file which can be played on MIDI player.

2¡

SD button

In the SD mode, it won't respond to the other button except [VOICE], [STYLE], [SONG].

It can play MIDI file and save recorded data at the root directory.

Play

When power is on, press the [PLAY] button to play all files at the root directory in SD card and the PLAY indicator is on.

Play midi file at the root directory in SD.

Save the recorded data to SD root directory as midi file.

Play all files and indicator is on.

VOICE STYLE SONG

In the SD mode, you can select the midi file with [+] or [-] button. The default file number is 001.

VOICE STYLE SONG

Select the midi file to play.

When playing the midi file, you can press the [PLAY] or the [START/STOP] button to stop playing.

Stop playing.

START

/STOP

ACC

VOL

Press the [START/STOP] button again to start to play it repeatedly.

Start or stop playing the midi file.

No midi file in the SD

Press the [PLAY] button when there is no midi file in the

SD card, LED display "noF", then the display will get back to previous mode in 2 seconds.

Store

Please add the following in the "Store" Section, after "If the SD card capacity is full, it will stop saving auto matically and display "Ful".Then exit the store mode and return to the previous mode."

If there's no MIDI files in the root directory of the card, "NoF" will display on the LED, meaning there's no recorded user song to be saved to the card.

If the card is write-protected, "Loc" will display on the LED.

VOICE STYLE SONG

VOICE STYLE SONG

Enter store mode and indicator is on.

The midi file name is generated by system automatically.

VOICE STYLE SONG

After saving, indicator goes off.

19

Midi Controler

Summarize

Under MIDI controller mode, other buttons all have no effect except four MIDI controller, [+]/[-] numeric button, the VOICE/STYLE/SONG button.

When power on the piano, press one of the

[COMMAND], [VALUE], [CHANNEL] and

[MIDIOUT] MIDI controller to enter into MIDI controller mode. When in other mode, press the

[MIDIOUT] button to send out a set of default midi control command.

Press the [VOICE ] / [STYLE ] / [SONG] button, can exit the MIDI controller mode, return to voice, style or song mode.

into midi controller mode

Command

Press this button, the command indicator is on, you can choose the related command by pressing the [+] / [-] or numeric button.

MIDI OUT

Press this button, the MIDIOUT indicator turns on and it send out a set of midi control command, the indicator flashes in the process of sending out, when it finish sen ding out, the indicator go off.

Value

Press this button, the value indicator is on, you can set the value by pressing the [+], [-] or numeric button.

Channel

Press this button, the channel indicator is on, you can select any channel that you want from

1-16 by pressing the [+], [-] or numeric button.

Exit the MIDI controller mode

+

finish sending out

20

Command

1.

2.

When the button is pressed, the indicator of the button lighter.

The LED display 001 (default command), you can select MIDI CTRL information by the numeric button , the [ + ] button or the [ - ] button and

¡XXX,¡ will displayed on LED. You can set 131

MIDI command (0 £130), the default number is 1.

number

0-127

128

129

130 command standard MIDI control(BN) program change(CN) channel pressure(DN)

pitch bend(EN)

3.

T he command you select is shown on the LED .

(Once you set 128,”Cn”will be displayed, you set 129, “Dn” will be displayed, you set 130,

En” be displayed), you can select number allowed circlularly by pressing the [ + ] button or the [ - ] button;While setting number with the numeric button,after you press the first number, the command indicator flashes and wait for press the second number, finish pressing the second, if still allow press the third number, the indicator

continues to flash, waiting for press the third

number, when you finish pressing the third

number, it will stop flash. If you does not press

any button in 2 seconds , it will exit the number

setting status automatically.

VOICE STYLE

SONG

127

128

129

130

VOICE STYLE SONG

VOICE STYLE SONG

VOICE STYLE SONG

VOICE STYLE SONG

VOICE STYLE

SONG

VOICE STYLE

SONG

If the number you set is from 0 -127 , that represent as the DATA1 of Bn order, and the value of

DATA2 can be set by pressing [VALUE] button.

If the number you set is 128,that means Cn command be selected, the value of DATA can be set by pressing the [VALUE] button .

If the number you set is 129, that means Dn command be selected,the value of DATA can be set by pressing the [VALUE] button .

If the number you set is 130, that means En command be selected, the value of DATA can be set by pressing the [VALUE] button .

When the value you set is 0H, that means to bend the note down to the lowest,

When the value you set is 40H, that means to bend the note to the normal value;

When the value you set is 7FH, that means to bend the note up to the highest.

21

4.

In COMMAND mode, press the [VALUE]/

[CHANNEL] button to enter into VALUE and

5.

6.

CHANNEL setting mode, corresponding button indicator turn on, the COMMAND indicator go off.

If you press the [MIDIOUT] button, it will enter into midiout mode and send out midi control message.

Press the [COMMAND] button continuously to select the next command type (as follows).

NO.

Adjustdigit value Display(default) Commandtype name

1

2

0-127

128

001

Cn

Bn

Cn

3

4

129

130

Dn

En

Dn

En

once twice

Press the 【COMMAND】 button continuously

thrice quartic

Channel

1.

The button is used to choose the MIDI CTRL channel, from:1~16.

2.

Pressing this button to get into CHANNEL setting mode, the LED display the current default channel value XX, the CHANNEL button indicator light up .

3.

Use the [ + ] button, the [ - ] button or numeric button to choose CHANNEL.

You can choose channel allowed circlularly by pressing the [ + ] or the [ - ] button .

You can also set channel with the numeric button, after press the first number, channel indicator flashes and wait for press the second number, when you finish pressing the second number, it will stop flash. If you does not press any button

in 2 seconds , it will exit the number setting status automatically.

4.

If you press the [COMMAND] button or [VALUE]

button, it will get into correspond mode, and the

indicator of the corresponding button indicator

turn on, the CHANNEL indicator go off.

5.

If you press the [MIDIOUT] button, it will get into midiout mode.

VOICE STYLE

SONG

VOICE

STYLE SONG

VOICE STYLE SONG

VOICE STYLE

SONG

VOICE

STYLE SONG

VOICE STYLE

SONG

VOICE STYLE SONG

22

Value

1.

Press this button to enter into VALUE setting mode, the indicator is on, the LED will show the default VALUE as 064.

2.

Use the [ + ] button, the [ - ] button or numeric button to set VALUE value from 0 £127.

you can set value allowed circlularly by pressing the [ + ] button or the [ - ] button .

you can also set value with the numeric button, after you press the first number, the value indicator flashes and wait for press the second number, finish pressing the second, if still allow press the third number, the indicator continues to flash, waiting for press the third number, when you finish pressing the third number, it will stop flash.If you does not press any button in 2 seconds , it will exit the number setting status automatically.

3.

If you press the [COMMAND] button or the

[CHANNEL] button , it will get into correspond mode and its button indicator turn on, the VALUE indicator go off.

4.

If you press the [MIDIOUT] button, it will get

into MIDIOUT mode.

MIDI OUT

1.

2.

Press [MIDIOUT] button to sent out a set of

MIDI control message.

Press this button, the indicator of that button flash within 2 seconds, when finish sending out

MIDI CONTROL message, the indicator go off.

Press this button doesn't change current mode after sending out MIDI CONTRO Lessage.

Continuous pressing the [MIDIOUT] button, it will send out same MIDI CONTROL message.

23

VOICE STYLE SONG

VOICE STYLE

SONG

VOICE

STYLE SONG

What is MIDI

12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB

1¡ Musical Instrument Digital Interface. The standard interface between PC and Electronic instrument.

¡

2¡

It is equipped with standard MIDI interface, including 1

MIDI IN and 1 MIDI OUT.

3¡ Connection

It can connect with PC or other MIDI equipment.

L/MONO R SUSTAIN SOFT

MIDI IN/OUT

Terminals

MIDI Connection

1¡

Connection rule

In midi connection, the equipment which controls another equipment is called Host Equipment.

Another equipment is called Affiliated Equipment.

The host equipment's MIDI OUT connect with affiliated equipment's MIDI IN.

Do not connect MIDI OUT with MIDI IN on the same equipment.

2¡

MIDI IN

You can use a MIDI cable to connect the MIDI IN terminal of system to another MIDI OUT terminal of compatible MIDI electronic instrument. Use MIDI IN, system can receive midi data such as note, program and touch etc. in order to be

handled by another MIDI instrument.

MIDI OUT

You can use a MIDI cable to connect the MIDI OUT terminal of system to another MIDI IN terminal of compatible MIDI electronic instrument. Midi data of system can be sent by MIDI OUT, when a note is generated, the relative message will be transmitted. System can control other midi instrument by sending program change messages

3¡

Sample Connection Method

Connect the MIDI interface with your PC.

Connect the MIDI interface with other digital music instruments.

Major Application

1¡

The piano can control other equipments or electronic instruments.

2¡

Some equipments can be used to control the piano.

PC recorded data (MIDI) can be played on the piano.

24

Specifications

Keyboard

Voice

Style

Song

Display

Switch and Buttons

Transpose

Pedals

Connectors

Dimension

Weight

88 keys, 3 kinds of touch level.

20 voices.

20 piano styles.

60 songs.

LED display.

POWER SWITCH, VOLUME SWITCH, DUAL, REVERB/CHORUS,

TOUCH, RECORD, TRACK 1, TRACK 2, PLAY/STOP, SPLIT, METRO,

TRANSPOSE +/-, TEMPO +/-, SD CONTROL, SONG, VOICE, STYLE,

BRILLIANCE,MIDIOUT,COMMAND,VALUE, CHANNEL,SCALE,

START/STOP, ACC VOL, FILL A/FILL B

+

12 semi tones

Soft, Sustain

AC POWER, HEADPHONES, AUX IN/OUT, MIDI IN/OUT, PEDALS,USB

1360(L)x370(W)x143(H)mm

19.5kg

25

Appendix 1 - Voice List

No

001

002

010

011

012

013

014

015

016

003

004

005

006

007

008

009

017

018

019

020

PRG BANK

0 0

4 8

73

1

5

11

19

22

40

49

61

68

75

6

16

21

25

48

56

66

0

0

8

8

8

0

0

0

0

0

0

8

8

8

8

0

0

0

Name of Voice

Acoustic Grand Piano

Epiano1

Harpsichord

Hammond Organ

Accordion

Steel Guitar

String

Trumpet

Folk Sax

Jazz Flute

Bright Acoustic Piano

Epiano2

Vibes

Church Organ

Harmonica

STRTRIO

Slow String

Brass Section

Oboe

Pan Flute

Appendix 2 - Style List

No

001

010

011

012

013

014

015

016

002

003

004

005

006

007

008

009

017

018

019

020

Name of Style

Pianist

8 Beat

16 Beat

Ballad

Pop Piano

Boogie

Slow Rock

Swing

Jazz

Jazz Waltz

Swing Fox

Shuffle

Twist

Country Ballad

Bossa Nova

Latin

March

6/8 March

Waltz

Slow Waltz

26

Name of Voice on Panel

GRDPIANO

EPIANO1

HARPSICD

DRAWBAR

ACORDION

STGUITAR

STRING

TRUMPET

FOLK SAX

JZ.FLUTE

BRTPIANO

EPIANO2

VIBES

CHRORGAN

HAMONICA

STRTRIO

SLOWSTR

BRASS

OBOE

PANFLUTE

Appendix 3 - Song List

021

022

023

024

025

026

027

028

029

030

011

012

013

014

015

016

017

018

019

020

No

001

002

003

004

005

006

007

008

009

010

Name of Song

Piano

For Alice

Habanera

Four Little Swans

Moseta Dance

Germanic Dance

Turkish March

March

Away In A Manger

Chopsticks

2-Part Invention #13 In A Minor.B.W. Iii

Folk & Country

Country

Jambalaya

Susanna

Bridge

Battle Hymne Of The Republic

The Old Gray Mare

American Patrol

In The Rain

Sippin`Cider Through A Straw

Are You Lonesome Tonight

Golden & Pop

Only You

End Of The World

House Of Rising Sun

The Blue-Bells Of Scotland

Over The Rainbow

Beautiful Dreamer

Edelweiss

O Sole Mio

Silent Night

Ave Maria

048

049

050

051

052

053

054

043

044

045

046

047

055

056

057

No

031

032

033

034

035

036

037

038

039

040

041

042

058

059

060

Name of Song

Five Hundred Miles

Happy New Year

It`S Beginning To Look A Lot Like Christmas

Jeanie With The Light Brown Hair

My Bonnie

Song Of The Pearlfisher

The Stage Coach

Entertainer

Annie Laurie

Killing Me Softly With His Song

Last Rose Of Summer

The Old King Cole

Jazz & fusion

Maple Leaf Rag

June Samba

Funk

I Can......

Sea Shore

Guitar&Saxphone

The Hip Hop's Night

Blue Lunch

Cobweb

Wine

Jazz Old Man

Dark Eyes

Carlos

Sad

The Jazz

Chinese

South Mud Bay

Give You A Rose

Flowing Rill

27

MIDI Implementation Chart

Function Transmitted Recognized

Basic Default

Channel Changed

Default

Mode Messages

Altered

91

93

120

121

1ch

¡

¡

1-16ch

***********

09-120

1-16ch

1-16ch

3

¡

¡

0-127

Note

Number :

Velocity :

True voice

Note on

Note off

After

Touch

Pitch Bend key

Ch

123

¡s

¡s

Control 0

Change 1

5

6

7

10

11

64

65

66

67

80

81

*********** 0-127

¡

¡

¡

¡

¡

¡

¡

¡

¡

©

9nH,V=1-127 ¡

© 9nH,V=1 -127

(9nH,V=0;

¡ £ 9nH,V=0£ 8nH,V=0- 127)

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

©

©

¡

¡

¡

¡

¡

¡

¡

Bank Select

Modulation

Portamento Time

Data Entry

Volume

Pan

Expression

Sustain Pedal

Portamento on/off

Sostenuto Pedal

Soft Pedal

Reverb Program

Chorus Program

Reverb Level

Chorus Level

A ll Sound Off

Reset A ll

Controllers

All Notes Off

Remarks

Program

Change :

System Exclusive

System

Common true #

£Song Position

£Song Select

: Tune

System : Clock

Real Time

Aux

:Commands

:LOCAL ON/OFF

¡

***********

¡

¡

¡

¡

¡

¡

*1

¡

¡

¡

¡

¡

¡

¡

0-127

¡

¡

*1

28

MIDI Implementation Chart

Aux

Messages

:LOCAL ON/OFF

:ALL NOTES OFF

:Active sense

:Reset

¡

¡

¡

¡

¡

¡

¡

¡

*1

When the accompaniment is started, an FAH message is transmitted. When accompaniment is stoped, an FCH message is transmitted. When an FAH message is received, accompaniment is started. When an FCH message is received, accompaniment is stoped.

Mode 1: OMNI ON , POLY Mode 2 : OMNI ON , MONO 〇 : YES

Mode 3: OMNI OFF , POLY Mode 4 : OMNI OFF , MONO × : NO

29

Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.de

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement