- Computers & electronics
- Telecom & navigation
- Mobile phones
- Car kits
- Alpine
- APF-F391320-10VW
- Installation manual
advertisement
© 2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Installation Manual
Double DIN Kit
APF-F381320-10VW
APF-F391320-10VW
• Seat Leon 2010-> • Skoda Fabia 2007->
• Skoda Roomster 2006->
(Roomster only with OEM Radio)
• VW Caddy (Type 2K)
• VW Golf V
• VW Golf VI
• VW Passat (Type 3C)
• VW Passat CC
• VW Scirocco III
• VW Touran
Compatible with these Alpine double DIN devices
Alpine Navigation
2
1
4
3
Double DIN Kit contents:
• Metal Frame (1)
• Facia Plate (2)
• Installation Kit (3)
• Mounting Frame (4)
Installation Manual Double DIN Kit
VW Golf V only:
Pull up the aircone unit (fixed by clips).
Remove two Torx (TX20) screws
(see arrows) which become visible.
VW G olf V only
1. Remove the original trim frame, surrounding the radio
(fixed by clips).
Mount the metal brackets with the double DIN head unit
The position of the copper coloured holder can be adjusted to your needs for perfect fit
(see sample)
2. Remove the 4 Torx (TX20) screws
(These screws will be used again later).
Remove the OEM head unit.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
6. Connect all wires and fix the Alpine Double DIN head unit with the original Torx (TX20) screws
(which have been removed in step 2)
7. Reinstall everything in reverse order to finish installation.
advertisement
Related manuals
advertisement