Operating Instructions - FTP Directory Listing

Operating Instructions

FULL HD LCD Display (for business use)

Model No.

TH-42LFE7W

TH-50LFE7W

TH-65LFE7W

Please read these instructions before operating your set

and retain them for future reference.

TQB0AC0102-1

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.

Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions.

Visit our Panasonic Web Site http://panasonic.net

Table of Contents

Before use

•

Illustrations and screens in this Operating Instructions are images for illustration purposes, and may be different from the actual ones.

•

Descriptive illustrations in this Operating Instructions are created mainly based on the 65 inch model.

Important Safety Notice ........................................... 3

Safety Precautions ................................................... 4

Accessories .............................................................. 7

Accessories Supply ................................................. 7

Remote Control Batteries ........................................ 7

Connections .............................................................. 8

AC cord connection ................................................. 8

Video equipment connection ................................... 8

AUDIO OUT connection .......................................... 9

HDMI connection ..................................................... 9

DVI-D IN connection .............................................. 10

PC Input Terminals connection ...............................11

SERIAL Terminals connection ............................... 12

IR IN/OUT (infrared signal) connection ................. 13

CHARGE Terminals connection ............................ 13

Power On / Off ......................................................... 14

Selecting the input signal ...................................... 16

Basic Controls ........................................................ 17

ASPECT Controls ................................................... 19

Digital Zoom ............................................................ 20

On-Screen Menu Displays ..................................... 21

Adjusting Pos./Size ................................................ 22

Picture Adjustments ............................................... 24

Advanced settings ................................................. 25

Sound Adjustment .................................................. 26

PRESENT TIME Setup / Set up TIMER .................. 27

PRESENT TIME Setup .......................................... 27

Set up TIMER ........................................................ 28

Screensaver (For preventing image retention) .... 29

Setup of Screensaver Time ................................... 30

Wobbling ................................................................. 30

No activity power off .............................................. 31

ECO Mode settings ................................................. 32

Customizing the Input labels ................................. 33

Selecting the On-Screen Menu Language ............ 34

Customizing the On-Screen Menu Display .......... 34

Setup for MULTI DISPLAY ...................................... 35

How to Setup MULTI DISPLAY ............................. 35

ID Remote Control Function .................................. 36

Setup for Input Signals .......................................... 37

YUV / RGB-IN select ............................................. 37

Signal menu .......................................................... 38

Cinema reality ....................................................... 38

XGA Mode ............................................................. 39

Sync ...................................................................... 39

HDMI Range .......................................................... 40

Input signal display ................................................ 40

Network Setup ........................................................ 41

Options Adjustments ............................................. 43

Input Search .......................................................... 45

RS-232C/LAN Information Timing ......................... 46

Using Network Function ........................................ 47

Network Connection .............................................. 47

Command Control ................................................. 48

PJLink™ Protocol .................................................. 48

Using Web Browser Control .................................. 49

Before Using Web Browser Control....................... 49

Access from Web Browser .................................... 49

Display Control (BASIC CONTROL/OPTION

CONTROL Screen) ............................................... 50

NETWORK SETTING (NETWORK SETTING Screen) ... 51

Password Setting (CHANGE PASSWORD Screen) ....51

Crestron Connected™ page .................................. 52

Troubleshooting ..................................................... 54

Applicable input signals ........................................ 55

Shipping condition ................................................. 56

Speci¿ cations ......................................................... 57

2

Important Safety Notice

WARNING

1) To prevent damage which may result in ¿ re or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (À ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali¿ ed service personnel.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic ¿ elds.

Using this appliance near sources of strong electromagnetic ¿ elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear.

To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ¿ elds.

IMPORTANT INFORMATION

If a display is not positioned in a suf¿ ciently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the display.

• Only using furniture that can safely support the display.

• Ensuring the display is not overhanging the edge of the supporting furniture.

• Not placing the display on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

• Not standing the displays on cloth or other materials placed between the display and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the display or its controls.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Microsoft ® , Windows ® , Windows Vista ® , and Internet Explorer ® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

• Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and other countries.

• PJLink is a pending trademark in Japan, the United States and other countries and regions.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

• HDMI, the HDMI Logo, and High-De¿ nition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

• RoomView, Crestron RoomView and Fusion RV are registered trademarks of Crestron Electronics, Inc, and

Crestron Connected is the trademark of Crestron Electronics, Inc.

3

4

Safety Precautions

WARNING

Setup

This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

• Pedestal ....................................................... TY-ST42PE7 (for TH-42LFE7W, TH-50LFE7W)

TY-ST65PE7 (for TH-65LFE7W)

We are not responsible for any product damage, etc. caused by use of the pedestal or wall-hanging bracket made by other companies, or by failures in the installation environment for the pedestal or wall-hanging bracket even during the warranty period.

Always be sure to ask a quali¿ ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in ¿ re or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For suf¿ cient ventilation;

Leave a space of 10 cm or more at the top, left and right, and 5 cm or more at the rear, and also keep the space between the bottom of the display and the À oor surface.

Cautions for Wall Installation

• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket that conforms to VESA standards (TH-42LFE7W: VESA 200×200, TH-50LFE7W: VESA 400×200, TH-65LFE7W:

VESA 400×400) must be used.

• If you terminate the use of the Display on the wall, ask a professional to remove the Display as soon as possible.

• When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal objects inside the wall. An electric shock may occur if they contact metal objects inside the wall.

When installing the Display vertically, be sure to install the power indicator onto the top of the Display.

Do not install the product to a place where the product is exposed to direct sunlight.

• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.

During installation, impacts and the like may damage the Display. Please handle with care.


When using the LCD Display

The Display is designed to operate on 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Display to overheat, which can cause ¿ re or damage to the Display.

Do not stick any foreign objects into the Display.

• Do not insert any metal or À ammable objects into the ventilations holes or drop them onto the Display, as doing so can cause ¿ re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause ¿ re or electric shocks.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause ¿ re. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modi¿ cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause ¿ re and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

Do not remove covers and NEVER modify the Display yourself

• Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.)

• Have the Display checked, adjusted, or repaired at your local Panasonic dealer.

If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Display in this condition, ¿ re or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

• A short circuit may occur, which could cause ¿ re. Contact your local Panasonic dealer for any repairs that need to be made.

5


CAUTION

When using the LCD Display

Do not bring your hands, face or objects close to the ventilation holes of the Display.

• Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Display.

• If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿ re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿ re.

Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

Do not burn or breakup batteries.

• Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with ¿ ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Usage of a chemical cloth

• Do not use a chemical cloth for the panel surface.

• Follow the instructions for the chemical cloth to use it for the cabinet.

Notes before use

The usage environment of the liquid crystal panel may have an effect on the screen display. In addition, depending on the viewing angle, changes in hue or irregularities in brightness may occur.

• Please note that this is a characteristic of the liquid crystal panel and not a malfunction.

6

Accessories

Accessories Supply

Check that you have the accessories and items shown

Operating Instruction book Remote Control

Transmitter

N2QAYB000691

Batteries for the Remote

Control Transmitter

(R6 (UM3) Size × 2)

Power supply cord

Attention

Store small parts in an appropriate manner, and keep them away from young children.

Remote Control Batteries

Requires two R6 batteries.

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity (+ and -).

3. Replace the cover.

“R6 (UM3)” size

+

-

-

+

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Disposal of batteries should be in an environment-friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.

6. Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.

7

Connections

AC cord connection

AC cord

(accessory)

Notes:

• Insert the AC cord ¿ rmly into place.

• When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿ rst.

• The included AC cord is for use with this unit only.

Video equipment connection

PC IN

PC Input Terminal

(see page 11)

IR IN/OUT

IR IN/OUT (infrared signal) Terminal

Enable connection of multiple displays.

(see page 13)

CHARGE OUT

Connect to separately sold devices such as stick PCs to supply power. (see page 13)

SERIAL

SERIAL Input Terminal

Control the Display by connecting to PC.

(see page 12)

LAN: Connect to a network to control the unit.

(see page 41, 47)

AUDIO IN (DVI-D / PC IN)

Connect the audio output of a device connected to

DVI-D IN, PC IN.

(see page 10, 11)

DVI-D IN

DVI-D Input Terminal

(see page 10)

AUDIO OUT

Connect to sound equipment

(see page 9)

AV IN (HDMI 1, HDMI 2)

HDMI Input Terminal

(see page 9)

8

Connections

AUDIO OUT connection

Notes:

• Additional equipment and cables shown are not supplied with this set.

• To output sound from the AUDIO OUT terminal of the Display, be sure to set “Output Select” to “AUDIO OUT” in the

“Sound Adjustment” menu. (see page 26)

Stereo mini plug (M3)

Stereophonic sound code audio equipment line-in

HDMI connection

[Pin assignments and signal names]

Pin No.

Signal name Pin No.

Signal name

1 T.M.D.S Data2+ 11

T.M.D.S Clock

Shield

2

3

T.M.D.S Data2

Shield

T.M.D.S Data2-

12

13

T.M.D.S Clock-

CEC

4

5

6

7

8

9

10

T.M.D.S Data1+

T.M.D.S Data1

Shield

T.M.D.S Data1-

T.M.D.S Data0+

T.M.D.S Data0

Shield

T.M.D.S Data0-

T.M.D.S Clock+

14

15

16

17

18

19

Reserved

(N.C. on device)

SCL

SDA

DDC/CEC

Ground

+5V Power

Hot Plug Detect

19

18

3 1

4 2

Note:

Additional equipment and HDMI cable shown are not supplied with this set.

HDMI

AV OUT

HDMI

AV OUT

DVD player

HDMI cable

9

Connections

DVI-D IN connection

PC with DVI-D video out

Shared with PC

IN.


DVI-video cable (Within 5 m)

DVI-D Input Connector

Pin Layouts

9

1

17

8

24

Connection port view

16

Pin No.

1

Signal Name

T.M.D.S. data 2-

2 T.M.D.S. data 2+

3 T.M.D.S. data 2 shield

4

9

10

11

12

7

8

5

6 DDC clock

DDC data

T.M.D.S. data 1-

T.M.D.S. data 1+

T.M.D.S. data 1 shield

Pin No.

13

Signal Name

+5 V DC 14

15

16

Ground

Hot plug detect

17

18

19

20

T.M.D.S. data 0-

T.M.D.S. data 0+

T.M.D.S. data 0 shield

21

22

23

24

T.M.D.S. clock shield

T.M.D.S. clock+

T.M.D.S. clock-

Notes:


• Image deterioration may occur depending on the length or the quality of the cable.

10

Connections

PC Input Terminals connection

(Female)

Mini D-sub 15p

Conversion adapter

(if necessary)

(Male)

Shared with

DVI-D IN.


Audio

Connect a cable which matches the audio output terminal on the computer.

COMPUTER

Notes:

• Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080 dots when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show ¿ ne detail with suf¿ cient clarity.

• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.


• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci¿ ed frequency range.

Signal Names for Mini D-sub 15P Connector

5

10

4

9

3

8

2

7

1

6

15 14 13 12 11

Pin Layout for PC Input

Terminal

Pin No.

1

2

3

4

5

Signal Name

R

G

B

NC (not connected)

GND (Ground)

Pin No.

6

7

8

9

10

Signal Name

GND (Ground)

GND (Ground)

GND (Ground)

+5 V DC

GND (Ground)

Pin No.

11

12

13

14

15

Signal Name

NC (not connected)

SDA

HD/SYNC

VD

SCL

11

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Display is controlled by a computer.

Note:

To use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Setup” menu to “RS-232C”.

(see page 41)

COMPUTER

RS-232C Straight cable

(Male)

(Female)

D-sub 9p

Notes:

• Use the RS-232C straight cable to connect the computer to the Display.

• The computer shown is for example purposes only.


Basic format for control data

The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent.

STX C1 C2 C3

Start

(02h)

: P1 P2 P3 P4 P5 ETX

Colon

3-character command (3 bytes)

Parameter(s)

(1 - 5 bytes)

End

(03h)

Notes:

• If multiple commands are transmitted, be sure to wait for the response for the ¿ rst command to come from this unit before sending the next command.

• If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer.

• Consult an Authorized Service Center for detail instructions on command usage.

2 5

6 7 8 9

Pin layout for SERIAL Terminal

The SERIAL terminal conforms to the RS-232C interface speci¿ cation, so that the Display can be controlled by a computer which is connected to this terminal.

The computer will require software which allows the sending and receiving of control data which satis¿ es the conditions given below. Use a computer application such as programming language software. Refer to the documentation for the computer application for details.

Communication parameters

Signal level

Synchronization method

Baud rate

Parity

Character length

Stop bit

Flow control

RS-232C compliant

Asynchronous

9600 bps

None

8 bits

1 bit

-

Signal names for SERIAL IN terminal

Pin No.

2

3

4

5

6

Details

R X D

T X D

DTR

GND

DSR

7

8 (Shorted in this set)

1 • 9 NC

These signal names are those of computer speci¿ cations.

Command

Command Parameter

PON None

POF

AVL

AMT

None

***

0

IMS

1

None

HM1

HM2

DV1

PC1

DAM None

ZOOM

FULL

NORM

ZOM2

Control details

Power ON

Power OFF

Volume 000 - 100

Audio MUTE OFF

Audio MUTE ON

Input select (toggle)

HDMI 1 input (HDMI1)

HDMI 2 input (HDMI2)

DVI-D IN input (DVI)

PC IN input (PC)

Screen mode select (toggle)

Zoom1

16:9

4:3

Zoom2

With the power off, this display responds to PON command only.

12

Connections

IR IN/OUT (infrared signal) connection

Connect between the IR OUT terminal of the ¿ rst display and the IR IN terminal of the second display with a 3.5 mm stereo mini plug.

Infrared signals will be sent from the ¿ rst display to the second display.

First display Second display

Third display

* *

* Stereo mini plug (M3)

IR of the second display will not work in this connection.

It is possible to con¿ gure a daisy chain connection by repeating the connection above.

CHARGE Terminals connection

Power can be supplied when a separately sold stick PC or such other device is connected.

Note:

To supply power, be sure to set “5V Charge” to “On” in the “Options” menu. (see page 44)

Pin Layout and Signal Names of CHARGE Terminal

1

2

3

4

+5V

NC

NC

GND

1 2 3 4 stick PC

USB cable

Up to 5V/500 mA power can be supplied to an external device when an image is received.

Ɣ

If current exceeding the supply capacity À ows, output will be shut off and the following message will appear.

“5V CHARGE OUT overload. Please remove cable, then turn the display off/on.”

In this case, turn the power off and on with the remote control, etc.

Note:

If there is dust in a terminal, the protection circuit may function.

Cover the terminals, such as with tape, when not in use.

(The terminals are protected by tape when shipped from the factory.)

13

Power On / Off

Connecting the AC cord plug to the Display.

Connecting the plug to the Wall Outlet

Notes:

• Main plug types vary between countries. The power plug shown at right may, therefore, not be the type

¿ tted to your set.

• When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿ rst.

Press the Power switch on the Display to turn the set on: Power-On.

Power Indicator: Green

Press the button on the remote control to turn the Display off.

Power Indicator: Red (standby)

Press the button on the remote control to turn the Display on.

Power Indicator: Green

Turn the power to the Display off by pressing the switch on the unit, when the Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns orange in the power off state.

Power switch

Remote Control Sensor Power Indicator

14

Power On / Off

When ¿ rst switching on the unit

Following screen will be displayed when the unit is turned on for the ¿ rst time.

Select the items with the remote control. Unit buttons are invalid.

OSD Language

1 Select the language.

OSD Language

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

2 Set.

PRESENT TIME Setup

1 Select “DAY” or “PRESENT TIME”.

2

1

2

Setup “DAY” or “PRESENT TIME”.

Select “Set”.

Set.

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set

DAY

PRESENT TIME

MON

99 : 99

PRESENT TIME Setup


Set

DAY

PRESENT TIME

TUE

10 : 00

Notes:

• Once the items are set, the screens won't be displayed when switching on the unit next time.

• After the setting, the items can be changed in the following menus.

OSD Language (see page 34)

PRESENT TIME Setup (see page 27)

Power ON warning message

The following message may be displayed when turning the unit power ON:

No activity power off Precautions

’No activity power off’ is enabled.

If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time the power is turned ON. (see page 31)

This message display can be set with the following menu: Options menu

Power On Message (see page 44)

15

Selecting the input signal

Press to select the input signal to be played back from the equipment which has been connected to the Display.

Input signals will change as follows:

HDMI1 HDMI2 PC DVI

HDMI1: HDMI input terminal in AV IN (HDMI1).

HDMI2: HDMI input terminal in AV IN (HDMI2).

PC: PC input terminal in PC IN.

DVI: DVI input terminal in DVI-D IN.

Note:

Selecting is also possible by pressing the INPUT button on the unit.

Basic Controls

Main Unit

Remote control sensor

Brightness Sensor

Detects the brightness in the viewing environment.

(See page 32)

Power Indicator

The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.)

• Standby ......... Red

• Power-ON ...... Green

• HDMI1 Power management

HDMI2 Power management

......................... Orange (With HDMI1 or HDMI2 input signal. See page 32)

• PC Power management

....................... Orange (With PC input signal.

See page 32)

• DVI-D Power management

....................... Orange (With DVI input signal.

See page 32)

External input terminals

Connects such devices as video equipment or personal computers.

(see page 8)

Enter / Aspect button

(see page 19, 21)

Volume Adjustment

Volume Up “+” Down “–”

When the menu screen is displayed:

“+” : press to move the cursor up

“–” : press to move the cursor down

(see page 21)

MENU Screen ON / OFF

Each time the MENU button is pressed, the menu screen will switch. (see page 21)

Normal Viewing

Sound

Picture

Pos./Size

Setup

INPUT button (Input signal selection) (see page 16)

Main Power On / Off Switch

Basic Controls

Remote Control Transmitter

ACTION button

Press to make selections.

ASPECT button

Press to adjust the aspect.

(see page 19)

Standby (ON / OFF) button

The Display must ¿ rst be plugged into the wall outlet and turned on at the power switch (see page 14).

Press this button to turn the Display On, from Standby mode. Press it again to turn the Display Off to Standby mode.

POS. /SIZE button

(see page 22, 23)

PICTURE button

(see page 24, 25)

Sound mute On / Off

Press this button to mute the sound.

Press again to reactivate sound.

Sound is also reactivated when power is turned off or volume level is changed.

N button

(see page 23, 24, 25, 26)

POSITION buttons

INPUT button

Press to select input signal sequentially.

(see page 16)

ECO MODE (ECO)

Press to change the ECO MODE setup status. (see page 32)

FUNCTION buttons (FUNCTION)

(see page 45)

OFF TIMER button

The Display can be preset to switch to stand-by after a ¿ xed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 min 60 min 90 min

0 min

When three minutes remain, “Off timer 3 min” will

À ash.

The off timer is cancelled if a power interruption occurs.

AUTO SETUP button

Automatically adjusts the position/ size of the screen. (see page 22)

SET UP button (see page 27 - 42)

SOUND button (see page 26)

Volume Adjustment

Press the Volume Up “+” or Down

“–” button to increase or decrease the sound volume level.

R button (see page 21)

Press the R button to return to previous menu screen.

RECALL button

Press the “RECALL” button to display the current system status.

1

2

3

Input label

Aspect mode (see page 19)

Off timer

The off timer indicator is displayed only when the off

4 timer has been set.

Clock display (see page 44)

PC

4:3

1

2

4 10:00

Off timer 90min 3

Digital Zoom (see page 20)

18

ASPECT Controls

The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Note:

Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.

[from the unit]

Press repeatedly to move through the aspect options:

4:3 Zoom1 Zoom2 16:9

The aspect mode changes each time the ENTER button is pressed.

Note:

The aspect mode is memorized separately for each input terminal.

Aspect mode Picture Enlarged screen

16:9

Description

The display of the pictures ¿ lls the screen.

In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspect ratio.

4:3

Zoom1

Zoom2

Pictures with a 4:3 aspect ratio are displayed with their original aspect ratio. Side panels are displayed at the left and right edges of the screen.

Pictures with a 16:9 aspect ratio are displayed with their original aspect ratio. The left and right edges of the pictures are masked by side panels.

Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display ¿ lls the screen. The top and bottom edges of the pictures are cut off.

Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display ¿ lls the screen. The top and bottom edges as well as the left and right edges of the pictures are cut off.

Digital Zoom

This displays an enlargement of the designated part of the displayed image.

1

Display the operation guide.

Press to access Digital Zoom.

The operation guide will be displayed.

During Digital Zoom, only the following buttons can be operated.

[Remote control]

EXIT

1

POSITION /

ACTION button

2

Select the area of the image to be enlarged.

Press on the enlargement location to select.

The cursor will move.

EXIT

3

Select the magni¿ cation required for the enlarged display.

Each time this is pressed, the magni¿ cation factor changes.

This is shown in the image being displayed.

× 1 × 2 × 3

4

Return to normal display (quit Digital Zoom).

Press to exit from the Digital Zoom.

Notes:

• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.

• The Digital Zoom function cannot be selected while in the following operation state:

When MULTI DISPLAY Setup is On (see page 35).

When Screensaver is running. (see page 29, 30)

• While Digital Zoom is in operation, “Adjusting Pos./Size” cannot be used.

× 4

On-Screen Menu Displays

Remote Control Unit

1

Display the menu screen.

Press to select.

(Example: Picture menu) Press several times.

Each time the MENU button is pressed, the menu screen will switch.

Normal Viewing Picture

Sound Pos./Size Setup

2

Select the item.

Picture

Normalise

Picture Mode

Backlight

Contrast

Brightness

Colour

Sharpness

White balance

Normal

Advanced settings

FRAME CREATION

100

70

50

50

50

Normal

Normal

Max

3

Set.

( Example:

Picture menu)

Select.

Adjust.

Press.

Select.

Press.

Adjust.

4

Exit the menu.

Press.

Press to return to the previous menu.

Press several times.

Menu display list

Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Picture menu Setup menu Pos./Size menu Sound menu

Setup 1/2 Picture

Normalise

Picture Mode

Backlight

Contrast

Brightness

Normal

Colour

Sharpness

White balance

Advanced settings

FRAME CREATION see page 24, 25

100

70

50

50

50

Normal

Normal

Max

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select

No activity power off

OSD Language

Off

RGB

Disable

English(UK)

Pos./Size

Normalise

Auto Setup

H-Pos

H-Size

V-Pos

V-Size

Clock Phase

Dot Clock

1:1 Pixel Mode

Normal see page 22, 23

0

0

0

0

0

0

Off

Sound

Normalise

Output Select

Sound Mode

Bass

Treble

Balance

Surround

Normal see page 26

0

0

0

SPEAKERS

Normal

Off

Setup

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup

Menu Display Duration

Menu Transparency 20 see page 27-42

15 S

2/2

Adjusting Pos./Size

1

2

3

4

Press to display the Pos./Size menu.

Press to select the menu to adjust.

Press to adjust the menu.

Press to exit from adjust mode.

Pos./Size

Normalise

Auto Setup

H-Pos

H-Size

V-Pos

V-Size

Clock Phase

Dot Clock

1:1 Pixel Mode

Normal

0

0

0

0

0

0

Off

Note:

Unadjustable items are grayed out.

Adjustable items differ depending on the input signal and the display mode.

Note:

If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Pos./Size function.

AUTO

SETUP

H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the PC signal is received.

This setting only operates when a PC signal is input, and the aspect is “16:9”.

Using Remote Control

When on the remote control is pressed, “Auto Setup” will be executed.

When Auto Setup does not work, “Invalid” is displayed.

Notes:

• Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again.

• Depending on the signal, out of alignment may occur after Auto Setup. Carry out ¿ ne tuning for the position/size as required.

• If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and

1366×768@60Hz), pre-selecting the individual signal in “XGA MODE” (see page 39) may results in correct Auto Setup.

• Auto Setup does not work well when a signal such as additional information is superimposed out of valid image period or intervals between synchronizing and image signals are short.

• If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION ( ) then adjust Pos./

Size manually.

• If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform

Dot Clock adjustment.

V-Pos

Adjusting Pos./Size

Adjust the vertical position.

H-Pos Adjust the horizontal position.

H-Size Adjust the horizontal size.

V-Size Adjust the vertical size.

Clock

Phase

(During PC input signal)

Eliminate the À ickering and distortion.

Dot Clock (During PC input signal)

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized.

Over scan Turn image over scan On/Off.

Con¿ gurable signals are as follows:

525i, 525p, 625i, 625p, 750/60p, 750/50p (DVI, HDMI)

1:1 Pixel

Mode

On Off

Notes:

• “Off” is effective during only “16:9” aspect mode.

• When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.

Adjusts the display size when 1125i or 1125p signal is input.

Notes:

• “On” is effective during only “16:9” aspect mode.

• Select On when you would like to replay 1920 × 1080 input signal.

• Applicable input signal;

1125 (1080) / 50i · 60i · 24psF · 24p · 25p · 30p · 50p · 60p

• Select Off when À ickering is shown around the image.

• H-Size and V-Size cannot be adjusted when On is selected.

Off On

Helpful Hint ( /

Normalise

Normalisation)

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values (except “Clock Phase” and “Dot Clock”) are returned to the factory settings.

23

Picture Adjustments

1

Press to display the Picture menu.

2 Select to adjust each item.


Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Picture

Normalise

Picture Mode

Backlight

Contrast

Brightness

Colour

Normal

Sharpness

White balance

Advanced settings

FRAME CREATION

100

70

50

50

50

Normal

Normal

Max

Press to enter Advanced

Settings.

Press the left or right button to switch between modes.

Normal* Dynamic

Cinema

Normal

For viewing in standard environments.

Dynamic

For viewing in brighter environments.

Cinema

For use in viewing tone-focused pictures with brightness reduced.

Note:

If you would like to change the picture and colour of the selected Picture menu to something else, adjust using the items in the Picture menu. (see next page)


Normal Warm Cool

Advanced settings

Enables ¿ ne picture adjustment at a professional level

(see next page).

Advanced settings

Normalise

Input level

Gamma

W/B High R

W/B High G

W/B High B

W/B Low R

W/B Low G

W/B Low B

Normal

0

50

50

50

50

50

50

2.2

FRAME CREATION

Improves motion picture quality by reducing motion blur.


Off Min Mid Max

Notes:

• The mode is memorized per input terminal.

• Even if “Normalise” is selected, the Normal setting will not be restored.

• The picture and menu will disappear for a moment if you switch the mode to Off, or switch from Off to another mode.

• “FRAME CREATION” is not available for 42-inch models.


Normalise

Normalization)

While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION

( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Picture Adjustments

Item

Backlight

Contrast*

Brightness

Colour

Darker

Effect Adjustments

Brighter

Adjusts luminance of the back light.

Less

Darker

More

Brighter

Selects the proper brightness and density for the room.

Adjusts for easier viewing of dark pictures such as night scenes and black hair.

Less More

Adjusts colour saturation.

Notes:

• You can change the level of each function

(Backlight, Contrast, Brightness, Sharpness) for each Picture Mode.

• The setting details for normal, dynamic and cinema respectively are memorized separately for each input terminal.

• “Backlight” can be adjusted when “ECO

Mode” is set to “Custom” and “Power save” to “Off”. (see page 32)

Sharpness Adjusts picture sharpness.

Less More

Advanced settings

Item Effect Details

Input level Adjustment of parts which are extremely bright and hard to see.

Less More

Gamma S Curve 2.0 2.2 2.6

Down Up

W/B High

R

W/B High

G

W/B High

B

Less

Less

More

More

Adjusts the white balance for light red areas.

Adjusts the white balance for light green areas.

Less More

Adjusts the white balance for light blue areas.

W/B Low R Adjusts the white balance for dark red areas.

Less More

W/B Low G Adjusts the white balance for dark green areas.

Less More

W/B Low B Adjusts the white balance for dark blue areas.

Less More

Notes:

• Carry out “W/B” adjustment as follows.

1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.

2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.

3. Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

• The adjustment values are memorized separately for each input terminal.

• The adjustment range values should be used as an adjustment reference.


Normalise

Normalisation)

On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

25

Sound Adjustment

1

Press to display the SOUND menu.

2

Select to adjust each item.


Select the desired level by listening to the sound.

Sound

Normalise

Output Select

Normal

Sound Mode

Bass

Treble

Balance

Surround

0

0

0

SPEAKERS

Normal

Off

3


Item

Output Select

Sound Mode

Bass

Treble

Balance

Surround

Details

SPEAKERS: Emits sound from the built-in speakers.

AUDIO OUT: Emits sound through the AUDIO OUT terminal.

Normal: Emits the original sound.

Dynamic: Accentuates sharp sound.

Clear: Attenuates human voice.

Adjusts low pitch sounds.

Adjusts high pitch sounds.

Adjusts left and right volumes.

Select On or Off.

Notes:

• When “AUDIO OUT” is selected, the items other than “Balance” cannot be adjusted.

• Bass, Treble and Surround settings are memorized separately for each Sound Mode.


Normalise

Normalisation)

While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the

ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

PRESENT TIME Setup / Set up TIMER

The timer can switch the Display On or Off.

Before attempting Timer Set, con¿ rm the PRESENT TIME and adjust if necessary.

Then set POWER ON Time / POWER OFF Time.

1

Press to display the Setup menu.

2 Press to select Set up TIMER or PRESENT TIME Setup.

Press to display the Set up TIMER screen or

PRESENT TIME Setup screen.

Setup

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup


Menu Transparency 20

15 S

2/2

1

2

PRESENT TIME Setup

Press to select DAY or PRESENT TIME.

PRESENT TIME Setup

Press to setup DAY or PRESENT TIME.

button: Forward

button: Back

Notes:

DAY

Set


PRESENT TIME

MON

99 : 99

• Pressing “ ” or “ ” button once changes PRESENT TIME 1 minute.

• Pressing “ ” or “ ” button continuously changes PRESENT TIME by 15 minutes.

Press to select Set.

Press to store PRESENT TIME Setup.

Notes:

• Set cannot be selected unless PRESENT TIME is set.

• Unless setting the present time other than “99:99”, “DAY” and “PRESENT TIME” can not be set.

• The settings of “DAY” and “PRESENT TIME” are reset when leaving the display turned off for about 7 days for the following reasons:

Pressing switch of the unit to turn off the display.

Disconnecting the AC cord.

Interruption of power supply.

PRESENT TIME Setup / Setup TIMER

Set up TIMER

Set the program for turning the power On/Off and select the input signal at the speci¿ ed time. Up to 20 programs can be set.

[Setting Example]

Program 1, Every Monday, 12:00, Power On, Input: HDMI

Set up TIMER


Program

Timer Function

1

On

MON Day

Power Mode

Time

Input

Power On

12 : 00

HDMI

1 select

2 adjust

1

Set the program number.

2

To execute the program, set to “On”.

The program is disabled when “Off” is set.

3

Set the day.

The program is executed every day when “Everyday” is set

.

4

Set the power On/Off.

5

Set the time.

Pressing “ ” or “ ” button once changes “Time” 1 minute.

Pressing “ ” or “ ” button continuously changes “Time” by

15 minutes.

6

Set the input.

Notes:

• This function cannot be set unless “PRESENT TIME Setup” is set.

• If more than one programs are set for the same time, only the program with the smallest program number is enabled.

28

Screensaver

(For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time.

If the display must remain on, a Screensaver should be used.

When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.

BlackĺDark GrayĺGrayĺLight GrayĺWhite

1


Setup

2 Press to select Screensaver.

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select

Press to display Screensaver screen.


OSD Language

Off

RGB

1/2

Disable

English(UK)

Screensaver


Start

Mode Off

3

Mode selection

Press to select Mode.

Press to select each mode items.

Off

Interval

Time Designation

: Operates when Periodic Time and Operating

Time are setup and those times arrive.

: Operates when Start Time and Finish

Time are setup and those times arrive.

Standby after SCR Saver : Operates while Screensaver duration, and display enters standby mode.

On : Operates when Start is selected and the

ACTION ( ) button is pressed.

4

Start setting

When the Mode is set to On, press to select Start.

Press to start Screensaver.

The menu screen will disappear and the Screensaver will be activated. To stop the

Screensaver under On, press the R button or any buttons on the main unit.

Note: When the display is turned off, the Scrensaver will be deactivated.

Screensaver (For preventing image retention)

Setup of Screensaver Time

After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)

Press to select Start Time / Finish Time

(When Time Designation is selected).

Press to select Periodic Time / Operating Time

(When Interval is selected).

Press to select Screensaver duration

(When Standby after SCR Saver is selected).

Press to setup.

button: Forward

button: Back

Notes:

• Pressing “ ” or “ ” button once changes the Time 1 minute.

[However, switching occurs every 15 minutes when Periodic Time is selected.]

• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.

• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00 to

23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not be activated.

Note: Timer function will not work unless “PRESENT TIME” is set.

Screensaver

Mode

Start

Start Time

Finish Time


Time Designation

6 : 15

12 : 30

Screensaver


Mode

Start

Periodic Time

Operating Time

Interval

12 : 00

3 : 00

Screensaver


Mode

Start

Standby after SCR Saver

Screensaver duration 6 : 15

Wobbling

Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.

1

2

3


Press to select “Wobbling”.

Press to select “On” or “Off”.

On: Shifts the position of the display image on a ¿ xed time interval

.


Setup

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

1/2

Off

RGB

Disable

English(UK)

Notes:

• If “MULTI DISPLAY Setup” is set to “On”, this function does not operate.

• When this function is operating, part of the screen may appear to be missing.

30

1

No activity power off


Setup

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

1/2

Off

RGB

Disable

English(UK)

2 Press to select “Enable” or “Disable”.

3

Press to exit from Setup.

When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the Display for 4 hours.

Starting from 3 minutes before the turn off, the remaining time will be displayed.

Press any key to abort.

No activity power off 3min

When the power is turned off due to this function, a message “Last turn off due to ’No activity power off’.” is displayed next time the power is turned on.

Note:

During the screensaver is running, this function is disabled.

ECO Mode settings

ECO Mode settings

ECO Mode Custom

1 select

Press , select “ECO Mode settings” in

No signal power off


Enable

2 adjust

“Setup” menu and press button.

Off


Off

PC Power management

On

DVI-D Power management

Power save

Off

Off

ECO Mode

Off

Custom: The menu of power consumption reduction is individually set.

On: The following ¿ xed values are set to the menu of power consumption reduction. Individual setting is not available.

No Signal power off: Enable

PC Power management: On

DVI-D Power management: On

Power save: Sensor

Using Remote Control

When changes.

is pressed, the “ECO Mode” setting ECO Mode On

Custom settings

The menu of the power consumption reduction is individually set. This setting is enabled when “ECO Mode” is set to “Custom”.

No signal power off

Equipment power supply is turned Off when there is no signal.

When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.

HDMI1 Power management, HDMI2 Power management

When this function is set to On, it operates under the following conditions to turn the power on or off automatically.

When no pictures (sync signal) are detected for 30 or so seconds during HDMI1 or HDMI2 signal input: ĺ Power is turned off (standby); the power indicator lights up orange.

When pictures (sync signal) are subsequently detected: ĺ Power is turned on; the power indicator lights up green.

Notes:

• This function operates only during input from HDMI IN terminal.

• When the power indicator lights up orange, approx. 0.7 W of power is being consumed.

PC Power management


When no pictures are detected for 30 or so seconds during PC signal input:

ĺ Power is turned off (standby); the power indicator lights up orange.

When pictures are subsequently detected:

ĺ Power is turned on; the power indicator lights up green.

Notes:

• This function operates only during input from PC IN terminal.

• This function is effective when “Sync” is set to “Auto” and during normal viewing.

DVI-D Power management


When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:

ĺ Power is turned off (standby); the power indicator lights up orange.

When pictures (sync signal) are subsequently detected:

ĺ Power is turned on; the power indicator lights up green.

Notes:

• This function operates only during DVI signal input.

• When the power indicator lights up orange, approx. 0.7 W of power is being consumed.

Power save

This function adjusts the brightness of the backlight to reduce power consumption.

Off: This function does not operate.

On: Backlight brightness is reduced.

Sensor: The backlight brightness is automatically adjusted according to the viewing environment.

Note:

When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture menu is disabled.

Customizing the Input labels

This function can change the label of the Input signal to be displayed. (see page 16)

1


Press to select Input label.

2

Press to display the Input label screen.

Setup

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

1/2

Off

RGB

Disable

English(UK)

3

Press to select image input.

Press to change input label.

Input label

PC

DVI

HDMI1

HDMI2

PC

DVI

HDMI1

HDMI2

Image input

[PC]

[DVI]

[HDMI1]

[HDMI2]

Input label

PC / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

DVI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

HDMI1 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

HDMI2 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

(Skip): The INPUT button press will skip its input.

1

2

Selecting the On-Screen Menu Language


Press to select the OSD Language.

Press to select your preferred language.

Selectable languages

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

......(Chinese)

.......(Japanese)

Ɋɭɫɫɤɢɣ.......(Russian)

Setup

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

1/2

Off

RGB

Disable

English(UK)

Customizing the On-Screen Menu Display

Set the display time and background transparency of the on-screen menu display.

1


2 Press to select “Menu Display Duration”.

Press to adjust the display duration.



15 S

3 Press to select “Menu Transparency”.

Press to adjust the transparency.

4


Setup for MULTI DISPLAY

By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.

For this mode of operation, each display has to be set up with a Display number to determine its location.

(Example) group of 4 (2 × 2) group of 9 (3 × 3) group of 16 (4 × 4) group of 25 (5 × 5)

1

2

3

How to Setup MULTI DISPLAY


Press to select the MULTI DISPLAY Setup.

Press to display the “MULTI DISPLAY Setup” menu.

Press to select the MULTI DISPLAY Setup.

Press to select “On” or “Off”.

Setup

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup



15 S

2/2

MULTI DISPLAY Setup

MULTI DISPLAY Setup

Horizontal Scale

Vertical Scale

Bezel H Adjustment

Bezel V Adjustment

Location

10

10

Off

1

1

A1

Item

MULTI DISPLAY Setup

Horizontal Scale

Vertical Scale

Details

Select “On” or “Off”.

Select “1”, “2”, “3”, “4”, “5”.

Select “1”, “2”, “3”, “4”, “5”.

Areas of the image that are hidden by the joint sections are adjusted both horizontally and vertically (0~100).

To show joints between displays.

To hide joints between displays.

Bezel H Adjustment

Bezel V Adjustment

Suitable for still image display.

Setting value: 0

Suitable for moving image display.

Setting value: 100

Setup for MULTI DISPLAY

Item

Location

Details

Select the required arrangement number. (A1-E5 : Refer to the following)

Display Number locations for each arrangement.

(Examples)

( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) ( 5 × 5 )

A1

B1

C1

D1

E1

A2

B2

C2

D2

E2

A3

B3

C3

D3

E3

A4

B4

C4

D4

E4

A5

B5

C5

D5

E5

4


ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.

1

2

3

4

Note:

To operate this function, please purchase ID remote controller sold separately.

Object model : EUR7636090R (Europe)

EUR7636070R (Other countries)

Switch to on the right side.

Press the button on the remote control.

Press one of - , for the tens digit setting.

Press one of - , for the units digit setting.

Notes:

• The numbers in 2, 3 and 4 should be set up quickly.

• Adjustable ID number range is 0 - 99.

• If a number button is pressed more than two times, the ¿ rst two numbers become the ID number for the remote control.

ID remote control button operation

The operation is the same as normal remote control except for the button.

ID Cancellation

Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.)

Notes:

• Set the Remote ID “On” to operate the ID remote control.

If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.

(see page 44)

• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 44).

36

Setup for Input Signals

YUV / RGB-IN select

Select to match the signals from the source connected to DVI-D IN terminal.

YUV signals “YUV”

RGB signals

“RGB”

1


2 Press to select the “YUV/RGB-in select”.

Press to select the desired mode.

YUV RGB

3


Setup 1/2

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

Off

RGB

Disable

English (UK)

3

4


1

2

Signal menu

Note:

“Signal” setup menu displays a different setting condition for each input signal.


Press to select the “Signal”.

Press to display the Signal menu.




Setup 1/2

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

Off

RGB

Disable

English (UK)

Press ACTION ( ) button

For RGB

Signal [ RGB ]

Sync

Cinema reality

XGA Mode

Auto

Off

1024 × 768

H-Freq.

63.98

kHz

V-Freq.

60.02

Hz

Signal Format 1280×1024/60

For Digital

Signal [ Digital ]

Cinema reality

HDMI Range

H-Freq.

V-Freq.

63.98

60.02

kHz

Hz

Dot Clock Freq.

108.0

MHz


Off

Auto

Cinema reality

Cinema reality:

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.

Press to select Cinema reality.

Press to set On / Off.

Cinema reality Off


XGA Mode

This menu is displayed when the input signal is analog. This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).

When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @

60Hz XGA input signal irrespective of this setting.

Press to select “XGA Mode”.

Press to select “1024×768”, “1366×768”.

y

XGA Mode 1024 × 768

Note:

After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as necessary. (see page 22)

Sync

This function operates only during input from PC IN terminal.

Press to select the “Sync”.

Press to adjust.

Signal

Sync

Cinema reality

XGA Mode

[ RGB ]

Auto

Off

1024×768

Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

However, the synchronized signal that is input ¿ rst is selected.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.


HDMI Range

Switches the dynamic range according to the input signal from HDMI terminal.

Press to select “HDMI Range”.

Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.

Signal

Cinema reality

HDMI Range

[ Digital ]

Off

Auto

Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player

Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer

Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.

Note:

This function can be set to the HDMI signal.

Input signal display

Displays the frequency and the type of the current input signal.

Display range(PC input signal):

Horizontal 30 - 110 kHz

Vertical 48 - 120 Hz

The dot clock frequency is displayed during digital signal input.

Note:

The automatically detected signal format may be displayed differently than the actual input signal.

H-Freq.

V-Freq.

63.98

60.02

kHz

Hz


H-Freq.

63.98

kHz

V-Freq.

Dot Clock Freq.

60.02

108.0

Hz

MHz


Network Setup

Con¿ gure the various settings required to use the network function.

Setup

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup



15 S

2/2

Press

Network Setup

Control I/F Select

Display name

LAN Setup

RS-232C

LFE7-00

1/2

Network Setup

AMX D.D.

Crestron Connected™

Off

Off

2/2

Control I/F Select

Set whether to control with RS-232C or LAN.

Display Name

The name of the Display that is shown on the network can be changed.

LAN Setup

See page 42

AMX D.D.

This function allows the Display to be detected by AMX Device Discovery. For more details, visit the following website.

http://www.amx.com/

Crestron Connected™

When this function is set to on, the Display can be monitored or controlled via the network using equipment and application software of Crestron Electronics, Inc.

This Display supports the following application software from Crestron Electronics, Inc.

Ɣ

RoomView ® Express

Ɣ

Fusion RV ®

Ɣ

RoomView ® Server Edition

[Crestron Connected™] is a function to connect to a system developed by Crestron Electronics, Inc. which manages and controls multiple system devices connected to the network.

• For details of “Crestron Connected™”, refer to the Crestron Electronics, Inc. website (Provided only in English).

http://www.crestron.com/

For the download of “RoomView ® Express”, refer to the Crestron Electronics, Inc. website (Provided only in

English).

http://www.crestron.com/getroomview

Network Setup

LAN Setup

Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter can be con¿ gured.

Select “LAN Setup” and press

LAN Setup

Save

DHCP

IP address

Subnet mask

Gateway

Port

DUPLEX

Network ID

MAC Address

Off

192.168. 0. 8

255.255.255. 0

192.168. 0. 1

1024

Auto

0

--:--:--:--:--:--

.

DHCP, IP address, Subnet mask, and Gateway settings

1

Set DHCP.

When “Off” is selected, IP address and other settings can be set manually.

2

Select the item and press .

3

Enter an address.

IP address

1 Use

2 Use

3 Press

to select a digit.

to change a number.

.

Pressing will cancel the address change.

4

Select “Save” and press .

Port setting

1

Select “Port” and press .

2

Enter a port number.

Port

1

2

Use

Use

3 Press

to select a digit.

to change a number.

.

Pressing will cancel the port number change.

Save

Save the current network Setup. Each value set for

DHCP, IP address, Subnet mask, and Gateway will be saved. If “NG” is displayed, check the same IP address is not used within the same network.

DHCP (DHCP client function)

To obtain an IP address automatically using a DHCP server, set this to “On”. If DHCP server is not used, set this to “Off”.

IP address (IP address display and setting)

Enter an IP address if DHCP server is not used.

Subnet mask (Subnet mask display and setting)

Enter a subnet mask if DHCP server is not used.

Gateway (Gateway address display and setting)

Enter a gateway address if DHCP server is not used.

Port

Set the port number used for command control.

The available setting range is 1024 – 65535.

When the PJLink™ protocol is used, the port setting is not necessary.

DUPLEX

Set the connection speed of the LAN environment.

Select the value from Auto, 10 HALF, 10 FULL,100 HALF or 100 FULL.

Network ID

Set the ID to identify this unit.

The available setting range is 0 – 99.

MAC Address

Display the MAC address of this unit. However, the MAC address is not displayed when the “Control I/F Select” is set to “RS-232C”.

Notes:

• To use a DHCP server, make sure the DHCP server is started.

• Contact your network administrator for details on settings.

Options Adjustments

1

2

3

4

5

Press to display the SET UP menu.

Press to select “OSD Language”.

Press for more than 3 seconds.

Press to select “Options”.

Press to display the Options menu.

Press to select your preferred menu.


Press to exit from Options menu.

Options

Display Serial Number

Shipping

Options 1/3

Input Search

On screen display

Initial input

Initial VOL level

Maximum VOL level

Input lock

Button lock

Remocon User level

5V Charge

Options

On

Off

Off

Off

Off

Off

Off

On

0

0

2/3

Off-timer function Enable

Initial Power Mode

ID select

Remote ID

Serial ID

Normal

0

Off

Off

Studio W/B Off

LAN Control Protocol Protocol 1

RS-232C/LAN Information Timing

Options 3/3

Power ON Screen Delay Off

Clock Display Off

Power On Message (No activity power off)

Function button assign 1

Function button assign 2

On

Signal

Screensaver

• The serial number of this device is displayed when “Display Serial Number” is selected in step 3.

Item

Input Search

On screen display

Initial input

Adjustments

Set auto input switching for when there is no signal. (see page 45)

On: Displays all the following on screen.

• Power on display

• Input signal switch display

• No signal display

• Mute and the remaining time of off-timer after was pressed.

Off: Hides all the items above from view.

Adjusts the input signal when the unit is turned on.

Off PC DVI HDMI1 HDMI2

Notes:

• Only the adjusted signal is displayed. (see page 16)

• This menu is available only when “Input lock” is “Off”.

Initial VOL level

Maximum VOL level

Input lock

Press button to adjust the volume when the unit is turned on.

Off On

Off: Sets normal volume.

On: Sets your preferred volume.

Notes:

• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

• You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press button to adjust the maximum volume.

Off On

Off: Sets auto maximum volume.

On: Sets your preferred maximum volume.

Notes:

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically becomes the same as the “Maximum VOL level”.

• The volume display can go up to 100 regardless of the settings.

• You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

Locks the input switch operation.

Off PC DVI HDMI1 HDMI2

Notes:

• Only the adjusted signal is displayed (see page 16).

• Input switch can be used when this is set to “Off”.


Item

Button lock

Remocon User level

5V Charge

(CHARGE terminal power supply setting)

Off-timer function

Initial Power Mode

ID select

Remote ID

Serial ID

Studio W/B

LAN Control

Protocol

RS-232C/LAN

Information Timing

Power ON Screen

Delay

Power On Message

(No activity power off)

Adjustments

Off On MENU&ENTER

Off: All the buttons on main unit can be used.

MENU&ENTER: Locks

MENU

and

ENTER/

buttons on main unit.

On: Locks all the button on main unit except the Power switch.

Sets Button lock with the unit buttons in the following procedure.

Off: Press four timesĺPress

INPUT

ENTER/

MENU&ENTER: Press four timesĺPress four timesĺPress

ENTER/

four timesĺPress four timesĺPress

INPUT

four timesĺPress

ENTER/

On: Press four timesĺPress

ENTER/

four timesĺPress four timesĺPress

ENTER/

Off User1 User2 User3

Off: You can use all of the buttons on the remote control.

User1: You can only use , , , , buttons on the remote control.

User2: You can only use button on the remote control.

User3: Locks all the buttons on remote control.

Sets the power supply from the CHARGE terminal.

On: Supplies power when the power of the display is on.

Off: Supplies no power.

Note: Power will not be supplied in standby mode even if “5V Charge” is set to “On”.

Enable: Enables the “Off-timer function”.

Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Normal On Standby

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Normal: Power returns in as the same state as before the power interruption.

Standby: Power returns in standby mode. (Power Indicator : red/orange)

On: Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

(Standard value: 0)

The setting of this menu is valid only when using ID remote control.

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Note: To use the ID remote control function, it is necessary to set each ID number of remote control and display unit. About the setting method, please refer to “ID Remote Control Function” (see page

36) and “ID select” (above-mentioned).

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Off: Nullify all the settings adjusted.

On: Sets the colour temperature for TV studio.

Note: Valid only when the “Warm” is set as “White balance” in Picture menu.

Select the LAN control protocol.

Protocol 1: Control with the Panasonic Display sequence.

Protocol 2: Control with the sequence that compatible with Panasonic Projector.

Set up the informing manner if error warning occurred. (see page 46)

Off 1 2 3.... 30

You can set the power-on delay time of the displays to reduce the power load, when you press turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.

Set each display’s setting individually.

Off: The display will be turned on at the same time as

1 to 30 (sec.): Set the power-on delay time (second).

is pressed.

to

, the display will be powered on with time delay depending on this setting.

After pressing

Notes:

• During this function is working, the power indicator is blinking green.

• This function also works when the power recovers from failure or after plugging off and in again the power cord.

Whether to show/hide No activity power off Precautions at the time of power ON is set.

On: The warning precautions are shown at the time of power ON.

Off: The warning precautions are not shown at the time of power ON.

Note:

This setting is enabled only if “No activity power off” is “Enable” (see page 31).

Off: Not display the clock.

On: Display the clock.

The clock is displayed at the lower left of the screen when button is pressed.

Clock Display

10:00


Item

Function button assign 1

Function button assign 2

Adjustments

Set the functions that operates when

Signal: The “SIGNAL” menu is displayed.

is pressed.

Screensaver: The “SCREENSAVER” menu is displayed.

ECO menu: The “ECO MODE SETTINGS” menu is displayed.

Set up TIMER: The “Set up TIMER” menu is displayed.

Note:

Factory settings are as follows.

FUNCTION1 button: Signal

FUNCTION2 button: Screensaver

Use the FUNCTION button

The menu screen is displayed. (Example: Signal)

Signal [ Digital ]

Cinema reality

HDMI Range

H-Freq.

V-Freq.

63.98

60.02

kHz

Hz

Dot Clock Freq.

108.0

MHz


Off

Auto

Press the FUNCTION button to exit from the menu.

Normalisation

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or

“Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The

“Shipping” menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.

Options

Input Search

On screen display

Initial input

On

Off

1/3


Input Search

Input Search

Primary Input

Secondary Input

Off

1 select

2 adjust

Input Search

Off: When there is no signal, the input is not switched automatically.

All Inputs: Searches all inputs and switches to an input with a signal.

Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.

Searching...

“Searching...” is displayed during the input search.

Primary Input, Secondary Input

Set the input to search when “Priority” is selected.

(NONE) PC DVI HDMI1 HDMI2

Note:

This menu is available only when “Input lock” is “Off”. (see page 43)


RS-232C/LAN Information Timing

Set up the informing manner for no signal or temperature rising.

While RS-232C controls: Warning or error message sent on the display automatically.

While LAN controls: Acquire the warning or error message from the display.

Options

Off-timer function

Initial Power Mode

ID select

Remote ID

Serial ID

Studio W/B

LAN Control Protocol


Enable

Normal

0

Off

Off

Off

Protocol 1

2/3



No Signal Warning

No Signal Warning Timing

No Signal Error

No Signal Error Timing

Temperature Warning

Temperature Warning Value

Temperature Warning Release Value

On

5min

On

10min

On

55°C

52°C

1

2

select

adjust

No Signal Warning

If set to “On”, the display sends out the no signal warning.

No Signal Warning Timing

Set up the detecting time for no signal warning.

No Signal Error

If set to “On”, the display sends out the no signal error.

No Signal Error Timing

Set up the detecting time for no signal error.

The warning of “No Signal Warning” and the error of “No Signal Error” are not sent when the no signal state is detected through any of the following functions:

No Signal power off: Enable, PC Power management, DVI-D Power management, HDMI1 Power management,

HDMI2 Power management (see page 32)

Setting Example

No Signal Warning Timing: 5 minutes

No Signal Error Timing: 10 minutes

PC Power management: On (30 seconds)

If there is no signal when PC IN is input, “PC Power management” is activated ¿ rst and the Display enters the standby mode.

Note:

The “No Signal Error Timing” cannot be set shorter than “No Signal Warning Timing”.

Temperature Warning

If set to “On”, the display sends out the warning temperature.

Temperature Warning Value

Set up the detecting temperature for temperature warning.

Temperature Warning Release Value

Set up the temperature to release the temperature warning.

Using Network Function

Network Connection

This unit has a network function to control the network connected display with your computer.

Note:

To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”.

(see page 41)

Network function is disabled in standby mode.

Example of network connection

COMPUTER

LAN cable

(Shielded) ȵ

Use the

Shielded Twist

Pair (STP) LAN cable.

Display (main unit, rear)

Hub or broadband router

Notes:

• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.

• Use a LAN cable that is compliant with “CAT5” when connecting a device that supports 100BASE-TX.

• For instructions on how to connect, consult your network administrator.

Using Network Function

Command Control

Network function of the unit can control the unit in the same way as serial control from a network.

Supported commands

Commands used in the serial control are supported. (see page 12)

Note:

Consult your local Panasonic dealer for detail instructions on command usage.

PJLink™ Protocol

The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol.

• Display setup

• Display status query

Supported commands

Commands to control the unit with PJLink™ protocol are shown in the table below.

Command Control Remark

POWR

POWR ?

Power control

Power status query

Parameter

0 = Standby

Parameter

1 = Power “On”

INPT

INPT ?

AVMT

Input switch

Input switch query

Shutter control

Parameter

See the parameter for command INST ?

AVMT ?

Shutter control query

Parameter

10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute)

20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)

30 = Shutter mode Off (picture and audio mute deactivated)

31 = Shutter mode On (picture and audio on mute)

Parameter

11 = Picture Off (picture on mute)

21 = Audio Off (audio on mute)

30 = Shutter mode Off (picture and audio mute deactivated)

31 = Shutter mode On (picture and audio on mute)

ERST ?

Error status query

LAMP ?

Lamp status query

INST ?

Input switch list query

Parameter

First byte: 0

Second byte: 0

Third byte: 0

Fourth byte: 0

Fifth byte: 0

Sixth byte: Means other error. 0 or 2.

Meaning of the 0 – 2 settings:

0 = Error is not detected, 2 = Error

Not supported

Parameter

11: PC IN input (PC)

32: HDMI2 input (HDMI2)

31: HDMI1 input (HDMI1)

32: DVI-D IN input (DVI)

NAME ?

Projector name query

INF1 ?

Return the Display name contents selected in “Network Setup”.

Manufacturer name query Returns “Panasonic”

INF2 ?

Model name query Returns “65LFE7W” (for 65-inch model)

INFO ?

CLSS ?

Other information query

Class information query

Returns version number

Returns “1”

PJLink™ security authentication

Set “panasonic” for the PJLink™ password.

• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.

Using Web Browser Control

You can use a Web browser to control the unit and set up a network and password.

Before Using Web Browser Control

To use the Web browser control, the unit and computer setups are required.

Unit Setup

Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41, 42)

Computer Setup

Disable the proxy server settings and enable JavaScript.

(Windows)

Disable proxy server settings

1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet]

– [Internet Options].

2 Click the [Connections] tab and then [LAN Settings].

3 Deselect the [Use automatic con¿ guration script] and

[Use a proxy server for your LAN] boxes.

4 Click [OK].

(Macintosh)

Disable proxy server settings

1 From the [Safari] menu, click [Preferences].

General screen is displayed.

2 From the [Advanced] tab, click the [Change

Settings…] button next to [Proxies]. Click [Proxies] and set up a proxy server.

3 Deselect the [Web Proxy] and [Automatic Proxy

Con¿ guration] boxes.

4 Click [Apply Now].

Enable JavaScript

1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet]

– [Internet Options].

2 Set the security level on the [Security] tab to [Default

Level]. Alternatively enable [Active scripting] from the

[Custom Level] button.

Enable JavaScript

1 Display [Security] of Safari.

2 Select [Enable JavaScript] under [Web content].

Access from Web Browser

Access to the TOP screen of the Web browser control using a Web browser.

1 Start your Web browser.

2 Enter the IP address set with the “LAN Setup” of the unit.

(see page 42)

3 Enter the user name and password when the

Authentication screen is displayed.

Authentication screen

Notes:

Ɣ

The password used here is the same password used for command control and the PJLink™ security authentication.

Ɣ

Default user name and password are as follows:

User name: user1

Password: panasonic

Ɣ

The password can be changed on the Password

Setup screen after logging in (see page 51). The user name cannot be changed.

Ɣ

Under no circumstances, Panasonic Corporation or it's associated companies will ask customers their password directly.

Even if you are asked directly, please do not

Ɣ reveal your password.

This function is disabled in standby mode.

4 Click [OK].

After logged in, the TOP screen of the Web browser control is displayed. (see page 50)


TOP screen structure of the Web browser control

After logging in, the TOP screen of the Web browser control is displayed.

Menu

Menu items are displayed. When a button is clicked, setup screen of each item is displayed.

Item

BASIC

CONTROL

OPTION

CONTROL

NETWORK

SETTING

CHANGE

PASSWORD

Crestron

Connected™

Details

BASIC CONTROL screen is displayed.

(see below)

OPTION CONTROL screen is displayed. (see below)

Network Setup screen is displayed.

(see page 51)

Password setup screen is displayed.

(see page 51)

The Crestron Connected™ operations screen will appear. (see pages 52, 53)

Ɣ This button does not appear when

“Crestron Connected™” in “Network

Setup” is “OFF”. (see page 41)

According to the selected item from the menu, setup status or set items are displayed.

Network ID information

ID to identify the unit is displayed.

Display Control (BASIC CONTROL/OPTION CONTROL Screen)

Click BASIC CONTROL or OPTION CONTROL from the menu. Various controls of the unit can be set.

BASIC CONTROL screen

Click BASIC CONTROL from the menu. Unit status and buttons to change settings are displayed.

OPTION CONTROL screen

Click OPTION CONTROL from the menu. Command input

¿ eld for command control of the unit is displayed.

Item

POWER

INPUT SELECT

Details

Switch OFF the unit power.

Switch the input signals. Displayed buttons vary according to the connection status of the video device.

AUDIO MUTE Switch ON/OFF of the sound mute.

ASPECT Switch the screen modes

Item

COMMAND

RESPONSE

SEND

Details

Enter a command. Use the same command used for the serial control.

(see page 12)

Response from the unit is displayed.

Command is sent and run.

Note:

After the settings are changed, it may take a while till the display’s response is displayed.


NETWORK SETTING (NETWORK SETTING Screen)

Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting items, please check LAN Setup under the Network Setup of the unit. (see page 42)

Notes:

• To use a DHCP server, make sure the DHCP server is started.

• During a DHCP server is used, IP ADDRESS,

SUBNET MASK, and GATEWAY values cannot be entered.

• When the set values are changed properly,

“NETWORK SETTING CHANGED.” message and the changed set items are displayed.

DHCP

Item Details

Set to ON when a DHCP server is used, or OFF when it is not used.

IP ADDRESS Enter an IP address.

SUBNET MASK Enter a subnet mask.

GATEWAY

PORT

LAN SPEED

Enter a gateway address.

Enter the port number used for command control. The available setting range is 1024 - 65535.

Set the connection speed of the LAN environment.

NETWORK ID

SAVE

Set the ID to identify this unit. The available setting range is 0 - 99.

Save the each set value.

Password Setting (CHANGE PASSWORD Screen)

Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When the password is changed in this screen, the password used for command control and the PJLink™ security authentication is also changed.

Notes:

• The default password is “panasonic”.

• Up to 32 alphanumeric characters can be used for a password.

• When the password is changed properly, “Password has changed.” message is displayed.

Item

OLD

PASSWORD

NEW

PASSWORD

NEW

PASSWORD

(RETYPE)

SAVE

Details

Enter the old password.

Enter the new password.

Enter the password entered in “NEW

PASSWORD” for con¿ rmation.

Save the new password. The con¿ rmation screen is displayed.

Click OK to change the password.


Crestron Connected™ page

You can monitor or control the Display using Crestron Connected™.

When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed.

If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. In this case, return to the previous page by clicking [Back] in the operation page.

Operation page

HDMI1

HDMI2

6

7

3

4

1

2

5

1 Tools, Info, Help

Switches the pages for tools, information, help using the tab.

2 POWER

Switches off the unit power.

3 VOL DOWN, AV MUTE, VOL UP

Sets the volume, AV mute. When the power of the

Display is turned off, VOL DOWN, AV MUTE and

VOL UP are not available.

4 Input Select

Sets the input selection. When the power of the Display is turned off, this operation is not available.

5 Operation buttons on the menu screen

Operates on the menu screen.

6 Image quality adjustments

Operate items related to image quality.

7 Back

Returns to the previous page.

Tools page

Click Tools on the operation page.

1

2

3

4

5

1 Control system

Sets the information required for the communication with the controller that is connected to the Display.

2 User Password

Sets the password for the user rights in the operation page of Crestron Connected™.

3 Admin Password

Sets the password for the administrator rights in the operation page of Crestron Connected™.

4 Network status

Displays the setting of LAN.

DHCP: Displays the value in the current setting.

IpAddress: Displays the value in the current setting.

SubnetMask: Displays the value in the current setting.

DefaultGateway: Displays the value in the current setting.

5 Exit

Return to the operation page.

Note:

When you monitor or control the Display using Crestron Connected™, set “Crestron Connected™” to “On” in the

“Network Setup” menu. (see page 41)

Info page

Click Info on the operation page.

1

2

3

LFE7-00

PC


4

5

6

1 Display name

Displays the name of the Display.

2 Mac Address

Displays the MAC address.

3 Resolution

Displays the resolution of the Display.

4 Power Status

Displays the status of the power.

5 Source

Displays the selected video input.

6 Exit

Return the operation page.

Help page

Click Help on the operation page.

The Help Desk screen is displayed.

LFE7-00

PC

1

1 Help Desk

Sends or receive messages to the administrator who uses Crestron Connected™.

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Picture

Symptoms

Sound

Checks

Interference

Normal Picture

No Picture

No Picture

Noisy Sound

No Sound

No Sound

Normal Sound

Electrical Appliances

Cars / Motorcycles

Fluorescent light

Volume

(Check whether the mute function has been activated on the remote control.)

Not plugged into AC outlet

Not switched on

PICTURE and BRIGHTNESS/Volume setting

(Check by pressing the power switch or stand-by button on the remote control.)

If a signal with a non-applicable format, or frequency is input, only the input terminal indication is displayed.

No remote control operations can be performed.

Check whether the batteries have discharged completely and, if they have not, whether they were inserted properly.

Check whether the remote control sensor is exposed to an outdoor light or a strong À uorescent light.

Check whether the remote control designed speci¿ cally for use with the unit is being used. (The unit cannot be operated by any other remote control.)

A cracking sound is sometimes heard from the unit.

If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. There are no adverse effects on the performance or other aspects.

Adjust the position of the picture on the screen.

The top or bottom of the picture on the screen is cut off when I use the zoom function.

Areas at the top and bottom of the screen where the image is missing appear when I use the zoom function.

When using a video software program (such as a cinema size program) with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen.

I can hear sounds coming from inside the unit.

When the power is turned on, a sound of the display panel being driven may be heard:

This is normal and not indicative of malfunctioning.

Parts of the unit become hot.

Power automatically turns off unexpectedly.

There is no picture displayed or sound output sometimes.

The RS-232C is uncontrollable

Even when the temperature of parts of the front, top and rear panels has risen, these temperature rises will not pose any problems in terms of performance or quality.

Check the settings of “No Signal power off”, “PC Power management”, “DVI-D Power management” and “No activity power off”. Any of them may be set to “On (Enable)”.

(see page 31, 32)

When HDMI or DVI signals are input to the Display using a selector or distributor, sound or images may not be output in the normal fashion depending on the selector or distributor used.

The symptoms may be improved by turning the power off and on again, or by replacing the selector or distributor.

Check whether the connection has been made properly. (see page 12) When controlling the RS-232C command on page 12 from the RS-232C terminal in the display, make sure that “Control I/F Select” is “RS-232C”. (see page 41)

The LAN is uncontrollable Check whether the connection has been made properly. (see page 47) Check whether

“Control I/F Select” is “LAN” when controlling with the WEB browser control or the command control on page 48. (see page 41) Check whether “LAN Setup” has been con¿ gured properly.

(see page 42) When connecting to a device of AMX, Crestron Electronics, Inc., set “AMX

D.D.”, “Crestron Connected™”, according to the device to use. (see page 41)

This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction.

LCD Display panel

Symptoms

The screen darkens slightly when bright pictures with minimal movements are shown.

It takes a while for the picture to appear.

The edges of the images À icker.

There may be red spots, blue spots, green spots and black spots on the screen.

Check

The screen will darken slightly when photos, still images of a computer or other pictures with minimal movements are shown for an extended period. This is done to reduce image retention on the screen and the shortening of the screen’s service life: It is normal and not indicative of malfunctioning.

The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched.

Due to the characteristics of the system used to drive the panel, the edges may appear to À icker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you ¿ ne picture details. Occasionally, a few non-active pixels may appear on the screen as ¿ xed points of red, blue, green, or black. Please note this does not affect the performance of your LCD.

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while. This is not considered as malfunction.

Image retention appears

Applicable input signals

PC signals

Signal name

1 640x400@70Hz

2 640x480@60Hz

3 640x480@72Hz

4 640x480@75Hz

5 640x480@85Hz

6 800x600@56Hz

7 800x600@60Hz

8 800x600@72Hz

9 800x600@75Hz

10 800x600@85Hz

11 852x480@60Hz

12 1024x768@50Hz

13 1024x768@60Hz

14 1024x768@70Hz

15 1024x768@75Hz

16 1024x768@85Hz

17 1066x600@60Hz

18 1152x864@60Hz

19 1152x864@75Hz

20 1280x768@60Hz

21 1280x960@60Hz

22 1280x960@85Hz

23 1280x1024@60Hz

24 1280x1024@75Hz

25 1280x1024@85Hz

26 1366x768@50Hz

27 1366x768@60Hz

28 1400x1050@60Hz

29 1600x1200@60Hz

30 1920x1080@60Hz

31 1920x1200@60Hz

32 Macintosh13"(640x480)



Horizontal frequency

(kHz)

60.02

68.68

37.64

53.70

67.50

47.70

60.00

85.94

63.98

79.98

91.15

39.55

48.36

65.22

31.46

31.47

37.86

37.50

43.27

35.16

37.88

48.08

46.88

53.67

31.47

39.55

48.36

56.48

75.00

67.50

74.04

35.00

49.72

68.68

Vertical frequency

(Hz)

75.03

85.00

59.94

60.00

75.00

60.00

60.00

85.00

60.02

75.02

85.02

50.00

60.00

60.00

70.07

59.94

72.81

75.00

85.01

56.25

60.32

72.19

75.00

85.06

59.94

50.00

60.00

70.07

60.00

60.00

59.95

66.67

74.55

75.06

PC IN

(Dot clock (MHz))

* (25.17)

* (25.18)

* (31.5)

* (31.5)

* (36.0)

* (36.0)

* (40.0)

* (50.0)

* (49.5)

* (56.25)

* (65.0)

* (75.0)

* (78.75)

* (94.5)

* (108.0)

* (80.14)

* (108.0)

* (148.5)

* (108.0)

* (135.0)

* (157.5) 1

* (86.71)

* (162.0)

* (148.5)

* (30.24)

* (57.28)

* (100.0)

* Mark: Applicable input signal

1 Not compatible with SYNC ON G.

• The signal format automatically detected may differ from the actual input signal in display.

DVI-D IN

(Dot clock (MHz))

* (25.18)

* (40.0)

* (34.24)

* (51.89)

* (65.0)

* (53.0)

* (81.62)

* (108.0)

* (69.92)

* (87.44)

* (122.61)

* (162.0)

* (148.5)

* (154.0)

HDMI

*

*

*

*

*

*

*

*

*

*

*

*

*

*

Component signals

Signal name

1 525(480)/60i

2 525(480)/60p

3 625(575)/50i

4 625(576)/50i

5 625(575)/50p

6 625(576)/50p

7 750(720)/60p

8 750(720)/50p

9 1,125(1,080)/60p

10 1,125(1,080)/60i

11 1,125(1,080)/50p

12 1,125(1,080)/50i

13 1,125(1,080)/24psF

14 1,125(1,080)/30p

15 1,125(1,080)/25p

16 1,125(1,080)/24p

* Mark: Applicable input signal

Horizontal frequency

(kHz)

Vertical frequency

(Hz)

DVI-D IN

(Dot clock (MHz))

15.73 59.94 (27.0)

HDMI

*

*

15.63 50.00

15.63 50.00

31.25 50.00

(27.0)

* (27.0)

45.00 60.00

37.50 50.00 * (74.25)

67.50 60.00

33.75 60.00

56.25 50.00

28.13 50.00 * (74.25)

27.00 48.00

* (74.25)

* (74.25)

27.00 24.00

*

*

*

*

*

*

*

*

*

*

*

*

Shipping condition

This function allows you to reset the unit to the factory setting.

1


2 Press to select “OSD Language”.

Press for more than 3 seconds.

3 Press to select “Shipping”.

Press to display the Shipping menu.

Press to select “Yes”.

4

Press to con¿ rm.

5

6

Wait for 10 seconds.

Press the power switch ( ) on main unit to turn the power off.

Setup 1/2

Signal

Screensaver

Input label

ECO Mode settings

Wobbling

YUV/RGB-in select


OSD Language

Off

RGB

Disable

English (UK)

Options

Display Serial Number

Shipping

Yes

Shipping

No

[from the unit]

1 Press the MENU button till the Setup menu is displayed.

2 Press the Volume Up “+” or Down “–” button to select “OSD Language”.

3 Press and hold the ENTER button till the Shipping menu is displayed.

4 Press the Volume Up “+” or Down “–” button to select “Yes”.

5 Press the ENTER button and wait for 10 sec.

6 Press the power switch ( ) on main unit to turn the power off.

Speci¿ cations

Power Source

Power Consumption

Rated Power

Consumption

Stand-by condition

Power off condition

Sound

Speakers

Audio Output

LCD Display panel

TH-42LFE7W

95 W

TH-50LFE7W

220-240 V AC, 50/60 Hz

0.5 W

0.4 W

TH-65LFE7W

135 W

Screen size

(No.of pixels)

25 mm × 90 mm × 2 pcs

20 W [10 W+10 W] (10 % THD)

42-inch IPS panel (LED backlight), 16:9 aspect ratio

928 mm (W) × 522 mm (H)

× 1,065mm (diagonal)

50-inch VA panel (LED backlight), 16:9 aspect ratio

1,096 mm (W) × 616 mm (H) ×

1,257mm (diagonal)

2,073,600 (1,920 (W) × 1,080 (H))

[5,760 × 1,080 dots]

22 mm × 90 mm × 2 pcs

65-inch VA panel (LED backlight), 16:9 aspect ratio

1,428 mm (W) × 803 mm (H)

× 1,638 mm (diagonal)

Operating condition

Temperature

Humidity

Applicable signals

Scanning format

0 °C - 40 °C

20 % - 80 %

PC signals

525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·

50p · 24p · 25p · 30p · 24psF

VGA, SVGA, XGA, SXGA

UXGA ···· (compressed)

Horizontal scanning frequency 30 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

AV IN HDMI1

HDMI2

DVI-D IN

PC IN

AUDIO

LAN

SERIAL

AUDIO

AUDIO

OUT

CHARGE

Dimensions (W × H × D)

Mass (weight)

TYPE A Connector × 2

DVI-D 24 Pin

Content Protection

Stereo mini jack (M3) × 1

High-Density Mini D-sub 15 Pin

Compliance with DVI Revision 1.0

Compatible with HDCP 1.1

0.5 Vrms, Shared with PC IN

G with sync 1.0 Vp-p (75 ȍ)

G without sync 0.7 Vp-p (75 ȍ)

B: 0.7 Vp-p (75 ȍ)

R: 0.7 Vp-p (75 ȍ)

HD/VD: 1.0 - 5.0 Vp-p (high impedance)

0.5 Vrms, Shared with DVI-D IN Stereo mini jack (M3) × 1

RJ45 10BASE-T/100BASE-TX, compatible with PJLink™

External Control Terminal

D-sub 9 Pin RS-232C compatible

Stereo mini jack (M3) × 1

Output level: Variable (- ʊ 0 dB)

0.5 Vrms

[INPUT 1 kHz / 0 dB, 10 kȍ Load]

5 V/500 mA

963 mm × 566 mm × 77 mm 1,126 mm × 652 mm × 53 mm 1,458 mm × 840 mm × 52 mm approx. 9.5 kg approx. 14.5 kg approx. 33.5 kg

Note:

Design and speci¿ cations are subject to change without notice. Mass and dimensions shown are approximate.

<Software Information for This Product>

This product has software installed partially licensed under the Free BSD LICENSE.

Free BSD LICENSE regulations under the above specifications are as follows:

(These regulations are set by the third party; therefore the original (English) regulations are stated.)

Copyright © 1980, 1986, 1993

The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

58

MEMO

Customer’s Record

The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi¿ cation in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Web Site : http://panasonic.net

¤ Panasonic Corporation 2014

Printed in China

M0414-1064

No results