advertisement
Ferrari 3200
User’s Guide
Copyright © 2004
All Rights Reserved
Ferrari 3200 Computer User's Guide
Original Issue: April 2004
Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.
Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondense concerning your unit should include the serial number, model number, and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.
Ferrari 3200 computer
Model Number : _________________________________
Serial Number: ___________________________________
Purchase Date: ___________________________________
Place of Purchase: ________________________________
All trademarks and registered trademarks are the properties of their respective companies.
First things first
Your guides
A set of guides is provided to help you set up and use your Ferrari computer.:
The Just for starters… poster shows you how to set up your computer.
iii
This User's Guide provides clear and concise information on using your computer productively. You are advised to read it thoroughly and keep it handy for future reference.
For more information on our products, services, and support, please visit our web site: www.global.acer.com.
Basic care and tips for using your computer
Turning your computer on and off
To turn on your computer, open the lid and press the power button above the keyboard.
To turn the power off, you can do any of the following:
• Click on the Start button in Windows, and then select Shut Down on the popup menu.
• Push the power button.
To use this method, you must first click on the Power
Management icon in Windows Control Panel, and then check that the power button is set to shut down the computer when pressed. See Windows Help for more information.
iv
Note: If you are unable to shut down the computer in the usual way, press and hold the power button for more than four seconds.
You should then wait at least two seconds before turning the computer on again.
Taking care of your computer
Your computer will serve you well if you take care of it.
• Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator.
• Do not expose the computer to temperatures below 0°C (32°F), or above 50°C (122°F).
• Do not expose the computer to magnetic fields.
• Do not expose the computer to rain or moisture.
• Do not spill water or any liquid on the computer.
• Do not subject the computer to heavy shock or vibration.
• Do not expose the computer to dust or dirt.
• Do not place objects on top of the computer.
• Do not slam the lid shut. Close the computer gently.
• Do not place the computer on unstable or uneven surfaces.
Taking care of your AC adapter
It is important that you look after your AC adapter.
• Do not connect the adapter to any other device.
• Do not step on the power cord or place heavy objects on it. Route the power cord away from areas where people might walk on it or trip over it.
• Do not pull on the power cord when disconnecting from the mains power socket. Grasp and pull the plug instead.
• The total ampere ratings of equipment plugged into a power strip should not exceed the ampere rating for that power strip.
v
Taking care of your battery pack
It is also important that you look after your computer's battery pack.
• Use the correct battery model for your computer. Do not use other kinds of batteries.
• Turn the power off before removing or replacing the battery.
• Do not tamper with the battery. Keep the battery away from children.
• Dispose of batteries according to local regulations. Recycle if possible.
Cleaning and servicing
When cleaning your computer, it is important that you follow these steps:
• Turn off the computer and remove the battery.
• Disconnect the AC adapter.
• Clean with a soft cloth moistened with a little water. Do not use liquid or aerosol cleaners.
Refer to the chapter entitled “Frequently asked questions” on page 65
if any of the following occurs:
• You drop the computer or damage the case.
• You spill liquid on the computer.
• The computer does not operate normally.
vi
Basic care and tips for using your computer
Getting familiar with your computer
Using a computer security lock
Operating on battery power
Installing and removing the battery pack
1
31
Peripherals and options
Moving with your computer
Disconnecting from the desktop
What to bring to short meetings
What to bring to long meetings
Traveling internationally with your computer
Software
51
59
39
Troubleshooting
International Travelers Warranty (ITW)
Appendix A Specifications
Appendix B Notices
Energy Star Guidelines Compliance
Macrovision® copyright protection notice
Radio Device Regulatory Notice
Index
77
93
63
71
Getting familiar with your computer
Your Ferrari 3200 computer combines solid performance, versatility, multimedia capabilities and portability with a stylish design. Increase your productivity by working wherever you are.
This chapter provides an in-depth "tour" of your computer's features.
A tour of your computer
After setting up your new Ferrari notebook computer, as illustrated in the Just for starters… poster, take a few minutes to explore the unit.
Front open view
3
#
1
Item
Display screen
2
3
Power button
Touchpad
Description
Also called LCD (liquid-crystal display), displays computer output.
Turns on the computer.
Touch-sensitive pointing device which functions like a computer mouse.
4 Getting familiar with your computer
8
9
5
6
7
#
4
Item Description
Click buttons (left, center and right)
The left and right buttons function like the left and right mouse buttons; the center button serves as a 4-way scroll button.
Palmrest Comfortable support area for your hands when you use the computer.
Inputs data into your computer. Keyboard
Status indicators
Microphone
LEDs (light-emitting diode) that turn on and off to show the status of the computer, its functions and components.
Internal microphone for sound recording.
Launch keys Special keys for launching internet browser, email program and frequently
used programs. See “Launch Keys” on page 21 for more details.
Front view
3
4
#
1
2
Item Description
Speaker
4-in-1 card reader
Outputs sound.
Reads cards from Smart Media, Memory
Stick, MultiMedia, and Secure Digital cards.
4-in-1 card reader indicator Displays activity of 4-in-1 card reader.
Infrared port Interfaces with infrared devices (e.g., infrared printer, IR-aware computer).
Enables or disables Bluetooth functionality.
Indicates that Bluetooth is enabled.
5 Bluetooth button
6 Bluetooth indicator
7 InviLink button
8
9
InviLink indicator
Latch
Enables or disables wireless LAN feature.
(Manufacturing option)
Indicates status of wireless LAN communication.(Manufacturing option)
Latch for opening and closing the laptop.
Note : Only one card can operate at any given time.
5
6
Left view
Getting familiar with your computer
#
1
Item
Four USB 2.0 ports
2 IEEE 1394 port
Description
Connect to Universal Serial Bus devices
(e.g., USB mouse, USB camera).
Connects to IEEE 1394 devices.
3 PC Card slot
4
5
PC Card eject button
Line-in jack
The slot supports a standard Type II
CardBus PC Card.
Ejects the PC Card from the slot.
Accepts audio line-in devices (e.g., audio
CD player, stereo walkman).
6 Microphone jack Accepts input from external microphones.
7 Headphone/ Speaker/
Line-out jack
Connect to headphones or other lineout audio devices (speakers).
Right view
#
1
2
3
4
Item Description
Slot-loading optical drive eject button
Press the eject button to remove a disc from the slot loading optical drive.
Optical disc access indicator
LED that indicates when an optical disc is being read or written.
Slot-loading optical drive
DVD Super Multi for both reading and writing
DVD+/-RWs and DVD-RAMs.
Power jack Connects to an AC adapter.
Note: The slot-loading optical drive can only accept 12 cm disk.
7
8
Rear view
Getting familiar with your computer
#
1
Item
Modem jack
2 Network jack
Description
Connects to a phone line.
Connects to a Gigabit Ethernet network.
3 Parallel port Connects to a parallel device (e.g., parallel printer).
4 External display port Connects to a display device (e.g., external monitor, LCD projector) .
5 S-video Connects to a television or display device with S-video input.
6 Security keylock Connects to a Kensington-compatible computer security lock.
Bottom view
3
4
5
7
8
9
#
1
2
6
Item Description
Battery bay
Battery release latch
Houses the computer's battery pack.
Unlatches the battery to remove the battery pack.
Battery lock
Mini-PCI slot
Hard disk protector
Hard disk bay
Locks the battery in place.
Slot for adding mini-PCI cards.
Protects the hard disk from accidental bumps and vibration.
Houses the computer's hard disk (secured by a screw).
Memory compartment
Cooling fan
Personal identification slot
Houses the computer’s main memory.
Helps keep the computer cool.
Insert a business card or similar-sized identification card to personalize your computer.
9
10
Features
Getting familiar with your computer
Performance
• Mobile AMD Athlon
TM
64 processor.
• Memory upgradeable up to 2-GB DDR SDRAM with 2 slots
• High-capacity, Enhanced-IDE hard disk
• Li-ion main battery pack
• Microsoft® Windows® XP operating system
Display
• Thin-Film Transistor (TFT) liquid crystal display (LCD) displaying 32bit high color up to 1400 x 1050 Super eXtended Graphics Array
(SXGA
+
) resolution for 15.0”
• ATI MOBILITY™ RADEON™ 9700 with 128MB of video memory.
• 3D graphics engine
• Simultaneous LCD and CRT display support
• S-video for output to a television or display device that supports Svideo input
• "Automatic LCD dim" feature that automatically decides the best settings for your display and conserves power
• DualView
TM
Multimedia
• AC’97 stereo audio
• Built-in dual speakers.
• Built-in microphone.
• High-speed optical drive
• Built-in slot loading optical drive (DVD Super Multi).
• 15.1” TFT SXGA
+
(1400 x 1050 resolution) panel.
• Audio input and output jacks.
Connectivity
• High-speed fax/data modem port
• Gigabit Ethernet (GbE) port
• Fast infrared wireless communication
• Four USB 2.0 (Universal Serial Bus) ports
• IEEE 1394 port
• InviLink 802.11g wireless LAN(Manufacturing option)
• Bluetooth ready
• SD/MMC/SM/MS memory slot
Human-centric design and ergonomics
• Internet 4-way scroll button
• Sleek, smooth and stylish design
• Acer Fine Touch full-sized curved keyboard
• Ergonomically-centered touchpad pointing device
Expansion
• One Type II CardBus PC Card slot
• Upgradeable memory
11
12 Getting familiar with your computer
Indicators
The computer has three easy-to-read status indicators below the display screen, and two on the front of the computer.
The Power and Battery status indicators are visible even when the display is closed.
Icon Function
Caps lock
Description
Lights when Caps Lock is activated.
Num lock Lights when Num Lock is activated.
Media Activity
Power
Battery
Lights when the disc or optical drive is activated.
Lights green when the power is on and orange when the computer is in standby mode.
Lights orange when the battery is charging.
Using the Keyboard
The full-sized keyboard includes an embedded numeric keypad, separate cursor keys, two Windows keys and twelve function keys.
Special keys
Lock keys
The keyboard has three lock keys which you can toggle on and off.
13
Lock Key
Caps Lock
NumLk
Scr Lk
Description
When Caps Lock is on, all alphabetic characters are typed in uppercase. Toggle on and off by pressing the Caps Lock key on the left side of the keyboard.
When Num Lock is on, the embedded numeric keypad can be used. Toggle on and off by pressing the Fn + F11 keys simultaneously.
When Scroll Lock is on, the screen toggles up or down one line at a time when the up and down cursor control keys are pressed.
14
Embedded numeric keypad
Getting familiar with your computer
The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols are not printed on the keys.
Desired Access Num lock On Num lock Off
Number keys on embedded keypad
Cursor-control keys on embedded keypad
Main keyboard keys
Type numbers in a normal manner.
Hold Shift while using cursor-control keys.
Hold Fn while typing letters on embedded keypad.
Hold Fn while using cursor-control keys.
Type the letters in a normal manner.
Note : If an external keyboard or keypad is connected to the computer, the Num Lock feature automatically shifts from the internal keyboard to the external keyboard or keypad.
Windows keys
The keyboard features two keys that provide Windows-specific functions.
15
Key
Windows logo key
Description
Start button. Combinations with this key perform shortcut functions. Below are a few examples:
+ Tab (Activates next taskbar button)
+ E (Explores My Computer)
+ F (Finds Document)
+ M (Minimizes All)
Shift + + M (Undoes Minimize All)
+ R (Displays the Run... dialog box)
Application key Opens a context menu (same as a right-click).
16
Hot keys
Getting familiar with your computer
Using the Fn key with another key creates a hot key, providing a quick and convenient method for controlling various functions.
To use a hot key, first hold down the Fn key. Next, press the second key in the combination. Finally, release both keys.
Your computer provides the following hot keys:
Icon Hot key
Fn-F1
Function
Hot key help
Description
Displays help on hot keys.
Fn-F2
Fn-F3
Fn-F4
Setup
Power management scheme toggle
Sleep
Accesses the computer’s configuration utility.
Switches the power management scheme used by the computer (function available if supported by operating system).
See “Connectivity options” on page 26.
Puts the computer in Sleep mode.
See “Connectivity options” on page 26.
17
Hot key
Fn-F5
Fn-F6
Fn-F7
Fn-F8
Icon Function
Display toggle
Screen blank
Touchpad toggle
Speaker toggle
Description
Switches display output between the display screen, external monitor (if connected) and both the display screen and external monitor.
Turns the display screen backlight off to save power.
Press any key to return.
Turns the internal touchpad on and off.
Turns the speakers on and off.
Fn↑ Volume up Increases the speaker volume.
Fn↓
Fn-
→
Fn←
Volume down
Brightness up
Decreases the speaker volume.
Increases the screen brightness.
Brightness down Decreases the screen brightness.
18 Getting familiar with your computer
The Euro symbol
If your keyboard layout is set to United States-International or United
Kingdom or if you have a keyboard with a European layout, you can type the Euro symbol on your keyboard.
Note for US keyboard users: The keyboard layout is set when you first set up Windows. For the Euro symbol to work, the keyboard layout has to be set to United States-International.
To verify the keyboard type in Windows® XP, follow the steps below:
1 Click on Start, Control Panel.
2 Double-click on Regional and Language Options.
3 Click on the Language tab and click on Details.
4 Verify that the keyboard layout used for "En English (United
States)" is set to United States-International.
If not, select and click on ADD; then select United States-
International and click on OK.
5 Click on OK.
To type the Euro symbol:
1 Locate the Euro symbol on your keyboard.
2 Open a text editor or word processor.
3 Hold Alt Gr and press the Euro symbol.
Note: Some fonts and software do not support the Euro symbol.
Please refer to www.microsoft.com/typography/faq/faq12.htm.
19
Touchpad
The built-in touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The central location on the palmrest provides optimum comfort and support.
Note: When using an external USB mouse, you can press Fn-F7 to disable the touchpad.
Touchpad basics
The following items teach you how to use the touchpad:
• Move your finger across the touchpad to move the cursor.
• Press the left (1) and right (3) buttons located on the edge of the touchpad to do selection and execution functions. These two buttons are similar to the left and right buttons on a mouse.
20 Getting familiar with your computer
Tapping on the touchpad produces similar results.
• Use the 4-way scroll (2) button (top/bottom/left and right) to scroll a page up, down, left or right. This button mimics your cursor pressing on the vertical and horizontal scroll bars of Windows applications.
Function
Execute
Select
Drag
Left button
Right button
Click twice quickly
Center buttons
Click once
Click and hold, then use finger to drag the cursor on the touchpad
Tap
Tap twice (at the same speed as double-clicking a mouse button)
Tap once
Tap twice (at the same speed as double-clicking a mouse button) then hold finger to the touchpad on the second tap and drag the cursor
Access context menu
Scroll
Click once
Click and hold the button in the desired direction
(up/down/ left/right)
Note: Keep your fingers dry and clean when using the touchpad.
Also keep the touchpad dry and clean. The touchpad is sensitive to finger movements. Hence, the lighter the touch, the better the response. Tapping harder will not increase the touchpad’s responsiveness.
21
Launch Keys
Located above the keyboard are five buttons. The left-most button is the power button. To the right of the power button are the four launch keys. They are designated as the mail button, the web browser button, and two programmable buttons (P1 and P2).
Launch key
Web browser
P1
P2
Default application
Email application
Internet browser application
User-programmable
User-programmable
22 Getting familiar with your computer
E-Mail Detection
Click right button at the Launch Manager icon on the taskbar and click on E-Mail Detection. In this dialog box, you have the option to enable disable mail checking, set the time interval for mail checking, etc. If you already have an email account, you can fill in User Name, Password and POP3 Sever in the dialog box. The POP3 Sever is the mail server where you get your email.
Aside from the email checking function, there is a mail button that is used to launch the email application. It is located above the keyboard right below the LCD.
23
Storage
This computer supplies you with the following media storage:
• The High-capacity Enhanced-IDE hard disk
• The high speed optical drive
Hard disk
The high-capacity hard disk is the answer to your storage needs. This is where your programs and data are stored.
Optical drive
The optical drive provides increased storage capacity, as well as offering a host of multimedia possibilities.
24 Getting familiar with your computer
Ejecting the optical disc
To eject the optical disc when the computer is turned on, press the drive eject button.
To load an optical disc:
• With the computer turned on, insert the disc into the drive slot until you feel the drive catch the disc and take it the rest of the way in.
• The disc may need to be inserted nearly all the way in before the drive takes it in rest of way.
25
Audio
The computer comes with 16-bit high-fidelity AC’97 stereo audio, and includes a built-in sensitive microphone and dual stereo speakers.
Adjusting the volume
Adjusting the volume on the computer is as easy as pressing some
buttons. See “Hot keys” on page 16 for more informations on
adjusting the speaker volume.
26 Getting familiar with your computer
Connectivity options
Your computer has built-in connectivity options, enabling you to hook up to a network or communicate over a phone line.
Ethernet and LAN
The built-in network feature allows you to connect your computer to an Gigabit Ethernet-based (GbE-based) network.
To use the network feature, connect an Ethernet cable from the network jack on the rear of the computer to a network jack or hub on your network.
Important! See Windows® Help for information on setting up a network connection.
27
Fax/data modem
Your computer has a built-in V.92 56Kbps AC’97 Link fax/data modem.
Warning: This modem port is not compatible with digital phone lines. Plugging the computer into a digital phone system will damage the modem.
To use the fax/data modem port, connect a phone cable from the modem port to a telephone jack.
28 Getting familiar with your computer
Fast infrared
The computer’s fast infrared (FIR) port allows you to do wireless data transfer with other IR-aware computers and peripherals such as PDAs
(personal digital assistants), mobile phones, and infrared printers. The infrared port can transfer data at speeds of up to four megabits per second (Mbps) at a distance of up to one meter.
29
Securing your computer
Your computer is a valuable investment that you need to take care of.
Learn how to protect and take care of your computer.
Security features include hardware and software locks — a security notch and passwords.
Using a computer security lock
A security keylock notch located on the left panel of the computer lets you connect a Kensington-compatible computer security lock.
Wrap a computer security lock cable around an immovable object such as a table or locked drawer handle. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.
Using passwords
Passwords protect your computer from unauthorized access. Setting these passwords creates several different levels of protection for your computer and data:
• Supervisor Password prevents unauthorized entry into the BIOS
Utility. Once set, you must key-in this password to gain access to
the BIOS Utility. See “BIOS Setup Utility” on page 62.
• User Password secures your computer against unauthorized use.
Combine the use of this password with password checkpoints on boot-up and resume from hibernation for maximum security.
• Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints
30 Getting familiar with your computer on boot-up and resume from hibernation for maximum security.
• Hard Disk Password protects your data by preventing unauthorized access to your hard disk. Even if the hard disk is removed from the computer and moved to another computer, it cannot be accessed without the Hard Disk Password.
Important! Do not forget your Supervisor and Hard Disk
Password! If you forget your password, please get in touch with your dealer or an authorized service center.
Entering passwords
When a password is set, a password prompt appears in the left-hand corner of the display screen.
• When the Supervisor Password is set, a prompt appears when you press F2 to enter the BIOS Utility at boot-up.
• Type the Supervisor Password and press Enter to access the BIOS
Utility. If you enter the password incorrectly, a warning message appears. Try again and press Enter.
• When the User Password is set and the Password on boot parameter is enabled, a prompt appears at boot-up.
• Type the User Password and press Enter to use the computer. If you enter the password incorrectly, a warning message appears.
Try again and press Enter.
• When the Hard Disk Password is set, a prompt appears at boot-up.
• Type the Hard Disk Password and press Enter to use the computer.
If you enter the password incorrectly, a warning message appears.
Try again and press Enter.
Important! You have three chances to enter a password. If you fail to enter the password correctly after three tries, the system halts. Slide and hold the power switch for four seconds to shut down the computer. Then turn on the computer again, and try again. If you fail to enter the Hard Disk Password, please contact your dealer or an authorized service center.
Setting passwords
You can set passwords using the BIOS Utility.
Operating on battery power
Your Ferrari 3200 computer operates on battery or AC power.
This chapter provides information for operating on battery power, as well as information on how your computer manages and saves power.
33
Battery pack
The computer uses a re-chargeable Li-Ion battery pack.
Battery pack characteristics
The battery pack has the following characteristics:
• Employs current battery technology standards.
• Delivers a battery-low warning.
The battery is recharged whenever you connect the computer to the mains power supply. Your computer supports charge-in-use, enabling you to recharge the battery while you continue to operate the computer. However, recharging with the computer turned off results in a significantly faster charge time.
The battery will come in handy when you travel or during a power failure. It is advisable to have an extra fully charged battery pack available as backup. Contact your dealer for details on ordering a spare battery pack.
Maximizing the battery's life
Like all other batteries, your computer's battery will degrade over time. This means that the battery's performance will diminish with time and use. To maximize your battery's life, you are advised to adhere to the recommendations set out below.
Conditioning a new battery pack
Before you use a battery pack for the first time, there is a
"conditioning" process that you should follow:
1 Insert the new battery without turning the computer on.
2 Connect the AC adapter and fully charge the battery.
3 Disconnect the AC adapter.
4 Turn on the computer and operate using battery power.
5 Fully deplete the battery until the battery-low warning appears.
6 Reconnect the AC adapter and fully charge the battery again.
34 Operating on battery power
Follow these steps again until the battery has been charged and discharged three times.
Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time. If the computer is to be stored for more than two weeks, you are advised to remove the battery pack from the unit.
Warning: Do not expose battery packs to temperatures below 0°C (32°F) or above 60°C (140°F). Extreme temperatures may adversely affect the battery pack.
By following the battery conditioning process you condition your battery to accept the maximum possible charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery.
In addition, the useful lifespan of the battery is adversely affected by the following usage patterns:
• Using the computer on constant AC power with the battery inserted. If you want to use constant AC power, you are advised to remove the battery pack after it is fully charged.
Note: If you remove the battery, the computer may be unstable if the battery has a rubber foot attached to it.
• Not discharging and recharging the battery to its extremes, as described above.
• Frequent use; the more you use the battery, the faster it will reach the end of its effective life. A standard computer battery has a life span of about 500 charges.
Installing and removing the battery pack
Important! Before removing the battery from the unit, connect the AC adapter if you want to continue using your computer.
Otherwise, turn off the computer first.
35
To install a battery pack:
1 Align the battery with the open battery bay; make sure that the end with the contacts will enter first, and that the top surface of the battery is facing up.
2 Slide the battery into the battery bay and gently push until the battery locks in place.
To remove a battery pack:
1 Slide the battery release latch to release the battery.
2 Pull the battery from the battery bay.
Charging the battery
To charge the battery, first make sure that it is correctly installed in the battery bay. Plug the AC adapter into the computer, and connect to a mains power outlet. You can continue to operate your computer on AC power while your battery is charging. However, charging the battery with the computer turned off results in a significantly faster charge time.
Note: You are advised to charge the battery before retiring for the day. Allowing the battery to charge overnight before traveling enables you to start the next day with a fully charged battery.
Discharging the battery
Acer recommends that you fully discharge the battery once a month.
This can help to extend the life of the battery. Simply unplug the AC adapter from your computer and allow the battery to run down overnight. Your data will be saved before the computer shuts down and stored in the hard disk.
Note: You are advised to discharge your battery once a month.
Checking the battery level
The Windows Power Meter indicates the current battery level. Rest the cursor over the battery/power icon on the taskbar to see the battery's present charge level.
36 Operating on battery power
Optimizing battery life
Optimizing battery life helps you get the most out of battery operation, prolonging the charge/recharge cycle and improving recharging efficiency. You are advised to follow the suggestions set out below:
• Purchase an extra battery pack.
• Use AC power whenever possible, reserving your battery for onthe-go use.
• Eject a PC card if it is not being used, as it will continue to draw power.
• Store the battery pack in a cool, dry place. The recommended temperature is 10°C to 30°C. Higher temperatures cause the battery to self-discharge faster.
• Excessive recharging decreases the battery life.
• Look after your AC adapter and battery.
Battery-low warning
When using battery power pay attention to the Windows Power
Meter.
Warning: Connect the AC adapter as soon as possible after the battery-low warning appears. Data will be lost if the battery to become fully depleted and the computer shuts down.
When the battery-low warning appears, the recommended course of action depends on your situation:
Situation
The AC adapter and a power outlet are available.
Recommended Action
1. Plug the AC adapter into the computer, and then connect to the mains power supply.
2. Save all necessary files.
3. Resume work.
Turn off the computer if you want to recharge the battery rapidly.
Situation Recommended Action
An extra fully charged battery pack is available.
1. Save all necessary files.
2. Close all applications.
3. Shut down the operating system to turn off the computer.
4. Replace the battery pack.
5. Turn on the computer and resume work.
The AC adapter or a power outlet is unavailable. You have no spare battery pack.
1. Save all necessary files.
2. Close all applications.
3. Shut down the operating system to turn off the computer.
37
38 Operating on battery power
Power management
Your computer features a built-in power management unit that constantly monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, touchpad/mouse, floppy disk drive, hard disk drive, optical drive, peripherals connected to the computer, and video memory. If no activity is detected for a period of time (the settings are controlled in
Windows Power Management), the computer turns off some, or all, of these devices in order to conserve power.
Your computer employs a power management scheme that supports
ACPI (Advanced Configuration and Power Interface), enabling maximum power conservation without compromising system performance. ACPI allows Windows to control the amount of power given to each device attached to the computer. In this way, Windows handles all power-saving chores for your computer. Refer to Windows
Help for more information.
Peripherals and options
Your Ferrari 3200 computer offers good expansion capabilities.
This chapter provides information on connecting peripherals to expand your system. It also describes how to upgrade key components to enhance system performance and keep your computer in step with the latest technology.
You are advised to consult your dealer for information on peripherals. In addition, make sure that you read the manuals and other documentation provided with new hardware.
41
External display devices
You can connect an external (VGA) monitor or projector to your computer's external display port. See the section entitled "Display" for information on using the computer's simultaneous display and multidisplay features.
Use the Fn + F5 hot key to toggle the display setting between the
External input devices
You can connect a variety of input devices to your computer's USB ports, providing increased functionality and greater ease-of-use. In addition, the USB ports can be used to connect many other peripheral
External keyboard
Your computer features a full-size keyboard. However, if you prefer, you can connect an external keyboard to one of your computer's USB ports. This enables you to enjoy the comfort and added features of a full-size desktop system keyboard when inputting typed data on your notebook computer.
External keypad
Your computer features an embedded keypad that, when combined with the Num Lock feature, enables you to easily input typed numeric data. Alternatively, you can connect a 17-key numeric keypad to one of your computer's USB ports. This enables you to enjoy the benefits of a numeric keypad without interfering with your use of the computer's keyboard for typing text.
External pointing device
Your computer features a sensitive touchpad pointing device with two click buttons and a scroll key. However, if you prefer to use a conventional mouse or other pointing device, you can connect it to one of your computer's USB ports.
42 Peripherals and options
USB devices
Your computer features four USB (Universal Serial Bus) 2.0 ports for
connecting a range of USB peripherals. See “External input devices” on
page 41 and “Printer” on page 44 for information on connecting a USB
keyboard, keypad, mouse or printer. Other common USB devices include digital cameras, scanners, and external storage devices.
USB is plug and play, which means that you can connect and start using a USB device without having to restart your computer. You can also disconnect the device at any time.
A further advantage of USB is the ability to use USB hubs. This means that several devices can share a USB port simultaneously.
IEEE 1394 Port
The computer’s IEEE 1394 port allows you to connect to an IEEE 1394 supported device like a digital video camera.
43
Note : See your video or digital camera’s documentation for details.
44 Peripherals and options
Printer
Your computer supports both parallel and USB printers.
Refer to the printer's manual for information on:
• Setting up the hardware.
• Installing the necessary drivers in Windows.
• Operating instructions.
To use a USB printer, simply connect the device to one of your computer's USB ports, and then wait for Windows to find the new hardware.
To connect a parallel printer, first shut down the operating system.
Connect the printer to the parallel port, and then restart the computer.
Wait for Windows to find the new hardware.
Audio devices
Your computer offers built-in stereo speakers. See the section entitled
“Audio” on page 25 for more information on these features. However,
in addition to the integrated devices, the two audio ports on the left side of the unit enable you to connect external audio input and output devices.
You can plug an external microphone into your computer's microphone-in jack. This offers the convenience of greater freedom of movement, as well as improved audio input quality.
Connect headphones to the headphone jack for private listening and improved audio output quality.
45
Expansion devices
PC Card
Your computer features a PC card slot that supports a standard Type II
PC card (PCMCIA or CardBus). This greatly increases your computer's usability and expandability. A variety of PC cards are available, such as flash memory, SRAM, fax/data modem, LAN, and SCSI cards. Consult your dealer for information on PC card options for your computer.
Note: Refer to your card's manual for details on how to install and use the card.
To insert a PC card:
1 Align the card with your computer's PC card slot. Make sure that the edge with the connectors is facing the slot, and that the card is the right way up. Many cards are marked with an arrow to help you insert them correctly.
2 Slide the card into the slot, and push gently until the card connects.
3 If necessary, connect the card's cable to the jack on the outer edge of the card.
4 Windows will automatically detect the card's presence.
46 Peripherals and options
To remove a PC card:
1 Close the application that is using the PC card.
2 Double click on the PC card icon on the taskbar, and then select the option to safely remove the card. Wait for the message telling you that it is now safe to remove the card.
3 Press the PC card eject button (a) to partially eject the card.
4 Pull the card (b) from the slot.
47
Miscellaneous options
Battery pack
It is a good idea to have a spare battery, especially when you travel with your computer. This greatly increases your productive range when you are on the move.
AC adapter
Having a spare AC adapter allows you to keep one in two different places. For example, you could have one AC adapter at home and another at work. This means that you don't have to carry an AC adapter when traveling between your two base locations.
48 Peripherals and options
Key component upgrades
Your computer is designed to deliver solid performance. However, in time, you might find that your applications demand even more computing power. For this reason, you are able to upgrade key components.
Note: Contact your authorized dealer if you decide to perform a key component upgrade.
Memory upgrade
Memory is expandable to 2GB with two memory slots, employing 256/
512 MB or 1 GB industry standard soDIMMs (Small Outline Dual Inline
Memory Modules). The computer supports DDR (Double Data Rate)
DRAM.
Installing memory:
Follow these steps to install memory:
1 Turn off the computer, unplug the AC adapter (if connected) and remove the battery pack. Then turn the computer over to access its base.
2 Remove the screws from the memory cover (a); then lift up and remove the memory cover (b).
49
3 Insert the memory module diagonally into the slot (a), then gently press it down (b) until it clicks into place.
4 Replace the memory cover and secure it with the screw.
5 Reinstall the battery pack, and reconnect the AC adapter.
6 Turn on the computer.
The computer automatically detects and reconfigures the total memory size.
Hard disk upgrade
It is possible to replace your hard disk with a higher capacity drive when you need more storage space. Your computer uses a 9.5mm 2.5inch Enhanced-IDE hard disk. Consult your dealer if you need to perform a hard disk upgrade.
50 Peripherals and options
Moving with your computer
Your Ferrari 3200 computer is ideal for taking with you when you move around.
This chapter provides tips on things to consider when traveling with your computer.
53
Disconnecting from the desktop
Before moving with your computer, you must turn it off and disconnect all peripherals:
1 Save your work and close all applications.
2 Shut down Windows to turn off your computer.
3 Unplug the AC adapter from the mains outlet, and then disconnect it from the computer.
4 Disconnect any external devices, such as a keyboard, mouse, or printer, that are attached to your computer.
5 If you are using a security lock cable, disconnect the lock from the computer.
6 Pack your computer in a strong, waterproof bag or case.
54 Moving with your computer
Moving around
Sometimes you might need to move your computer a short distance.
For example, you might need to move from your office desk to a meeting room. In these situations, you don't have to shut down the operating system.
Preparing the computer
First, disconnect any peripherals that you don't want to take with you.
Next close the lid, placing your computer in Standby mode. You can now safely carry it around the building with you.
When you are ready to use your computer again, open the lid and then press the power button to bring it out of Standby mode.
What to bring to short meetings
If your battery is fully charged, you probably won't need to take anything else with you to the meeting.
What to bring to long meetings
For longer meetings, take along the AC adapter. You can use mains power throughout the meeting, or you can run down your battery first, and then connect the AC adapter after receiving the battery-low warning.
If the meeting room does not have an available power outlet, reduce your computer's power consumption by putting it in Standby mode during long periods of inactivity. It is advisable to take along a spare battery if you have one.
55
Taking the computer home
When you move between your office and home you will need to prepare your computer for the short trip.
Preparing the computer
After disconnecting your computer from the desktop, prepare the unit as follows:
1 Remove all media from the drives. Loaded media can damage the drive heads during transit.
2 Pack the computer in a protective case that is padded to guard against knocks. Make sure that the unit cannot slide around inside the case.
Caution: Avoid packing items next to the top of the computer, as this could result in damage to the screen.
What to bring with you
If you don't have spare items at home, it is advisable to take along the
AC adapter and this User's Guide.
Special considerations
To protect your computer in transit, it is advisable to pay attention to the following:
• Minimize the effect of temperature changes. Keep your computer with you instead of placing it in storage holds.
• Avoid leaving your computer in a hot car.
• Changes in temperature and humidity can cause condensation to form in your computer. Before turning the computer on, allow it to return to room temperature, and then check the screen for signs of condensation. If the temperature change is greater than
10°C (18°F), allow the computer to come to room temperature slowly by placing it in a room with a temperature between the outside and room temperatures.
56 Moving with your computer
Setting up a home office
If you frequently work on your computer at home, as well as at work, it may be worthwhile purchasing a second AC adapter. This will allow you to travel lighter, as you can keep an AC adapter in each location.
You might also find it worthwhile keeping a second set of peripherals at home, such as a keyboard, keypad, mouse and printer.
57
Traveling with the computer
Sometimes you might need to make longer trips with your computer.
Preparing the computer
Prepare the computer as you would for moving between your office and home. It is advisable to make sure that the battery is fully charged.
If you are traveling by air, you might be required to turn on the computer during security checks.
What to take with you
It is advisable to take the following items with you:
• AC adapter.
• Spare, fully charged battery packs.
• Additional printer driver files (if you plan to use another printer).
• Phone and network cables (if you plan to use the computer's modem and network connections).
Special considerations
In addition to the considerations for taking your computer home, keep the following in mind:
• Always take your computer as carry-on luggage.
• If possible, have your computer manually inspected at security checks. Although the computer can pass safely through security
X-ray machines, you should never expose it to a metal detector.
• If carried separately, avoid exposing floppy disks to hand-held metal detectors.
58 Moving with your computer
Traveling internationally with your computer
Occasionally you might need to travel between countries with your computer.
Preparing the computer
Prepare the computer as you would for normal travel. Remember to take special precautions for air travel.
What to take with you
It is advisable to take the following items with you:
• AC adapter.
• Power cords that are appropriate for the countries you plan to visit.
• Spare, fully charged battery packs.
• Additional printer driver files (if you plan to use another printer).
• Phone and network cables (if you plan to use the computer's modem and network connections). Check that your modem is suitable for the telephone system in the countries you plan to visit.
You might have to use a PC card modem in some locations.
Special considerations
In addition to the considerations for normal travel with your computer, keep the following in mind when traveling internationally:
• Check that your power cord is suitable for the local power supply.
If necessary, purchase a power cord that meets local requirements.
Avoid using converter kits.
• If you plan to connect over a phone line, check that the computer's modem and your phone cord are suitable for the local phone system. If necessary, purchase a PC card modem that meets local requirements.
• If carried separately, avoid exposing floppy disks to hand-held metal detectors.
Software
Your Ferrari 3200 computer includes system utilities.
This chapter provides information on the important software that comes with your computer.
61
System software
Your computer comes preloaded with the following software:
• Microsoft® Windows® operating system.
• Hardware BIOS setup utility.
• System utilities, drivers and application software.
Note: To run software applications in Windows, first click on the
Start button. Next, select the appropriate folder, and then click on the application icon. To learn about the software and utility, make use of the online help provided by the software.
Launch Manager
Launch Manager allows you to set the four launch keys located above
the keyboard. See “Launch Keys” on page 21 for the location of the
launch keys.
You can access the Launch Manager by clicking on Start, All Programs, and then Launch Manager to start the application.
62 Software
BIOS Setup Utility
The BIOS (basic input/output system) contains important information used to configure the hardware and system software settings. Your computer reads the BIOS when it first starts up, before it loads the operating system.
Your computer's BIOS includes a built-in setup utility called Insyde
Software SCU (system configuration utility). It can be started shortly after you turn the computer on, by pressing the F2 key during POST.
The BIOS setup utility displays summary information on your computer, its devices, processor and memory.
Your computer is already configured for optimal performance, and so you should not need to run this utility. However, you may need to change the BIOS settings if you encounter configuration problems in
the future. Refer to “Frequently asked questions” on page 65 if a
problem arises.
Troubleshooting
This chapter instructs you on how to deal with common system problems. Please read it before calling a technician.
Solutions to more serious problems may require opening the computer. Do not attempt to open and service the computer by yourself. Contact your dealer or an authorized service center for assistance.
65
Frequently asked questions
This section suggests solutions to commonly encountered problems.
I press the power button, but my computer does not start or boot-up.
Look at the Power status indicator:
• If it is not lit, no power is being delivered to the computer. Check the following:
If you are running on battery power, the battery may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack.
If you are running on mains power, make sure that the AC adapter is properly plugged in to the computer and to the power outlet.
• If it is lit, check the following:
Make sure that there is not a non-bootable (non-system) diskette in the floppy disk drive. If so, remove the diskette and then press Ctrl-Alt-Del to restart the system.
Nothing appears on the screen.
The computer's power management system automatically blanks the screen to save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, check the following:
• The brightness level might be too low. Press Fn + → hot key to increase the screen brightness level.
• The display device might be set to an external monitor. Press the
Fn + F5 hot key to toggle the display setting.
• The system may be in standby mode. Try pressing the power button to resume.
The image is not full-screen.
Make sure that the resolution is set to a resolution your system supports:
• Right click on your Windows desktop and select Properties to bring up the Display Properties dialog box. Alternatively, click on the
Display icon in Control Panel.
• Click on the Settings tab to check the resolution setting.
Resolutions lower than the specified resolution result in a display that is less than full-screen.
66 Troubleshooting
There is no audio coming from my computer.
Check the following:
• The volume may be muted. In Windows, look at the volume control icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option.
• The volume level may be too low. In Windows, click on the volume control icon on the taskbar, and then use the slider control to increase the volume level.
• If headphones are connected to the headphone jack on the computer, your computer's built-in speakers will be turned off.
My external microphone does not work.
Check the following:
• Make sure that the external microphone is properly plugged into the microphone-in jack on the computer.
• Make sure that the volume is not muted or set too low.
I can't eject the optical disc with my computer turned off.
The computer needs to be turned on for the optical drive eject button to function.
The keyboard does not respond.
Try attaching an external USB keyboard to one of your computer's USB ports. If it works, the internal keyboard might have become disconnected. Contact your dealer or an authorized service center.
The floppy disk drive cannot read a diskette.
Check the following:
• Make sure the diskette is properly inserted in the floppy disk drive.
• Make sure that the diskette is formatted.
• Try to read a second diskette. If this works, then the first diskette might have a problem.
• If the diskette is not the cause of the problem, then the drive head might be dirty. Clean it using a drive head cleaning kit.
The optical drive cannot read a disc.
Check the following:
• Make sure that the disc is free from scratches or smudges. If the disc is dirty, clean it using a disc cleaning kit.
67
• If the disc is OK, the drive head might be dirty. Clean it using a drive head cleaning kit.
The printer does not work.
Check the following:
• Make sure that the printer is connected to a power outlet and it is turned on.
• Check that the cable is properly connected to the appropriate ports on both the computer and the printer.
• If you are using a printer connected to your computer's parallel port, restart the computer. Windows needs to find the new hardware and install the necessary drivers.
I want to set up my location to use the internal modem.
Follow these steps:
• Click on Start, and then click on Control Panel.
• Double-click on Phone and Modem Options.
• In the Dialing Rules tab, begin setting up your location.
Refer to Windows Help for more information.
When the battery is 95-99% full, it won't charge to 100% capacity.
To preserve the life of the battery, the system only lets you charge the battery when its capacity falls below 95%. It is recommended that you run down the battery, and then fully recharge it.
68
Requesting service
Troubleshooting
International Travelers Warranty (ITW)
Your computer is backed by an International Travelers Warranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand.
An ITW passport comes with your computer. This passport contains all you need to know about the ITW program. A list of available, authorized service centers is in this handy booklet. Read this passport thoroughly.
Always have your ITW passport on hand, especially when you travel to receive the benefits from our support centers. Place your proof-ofpurchase in the flap located inside the front cover of the ITW passport.
If the country you are traveling in does not have an Acer-authorized
ITW service site, you can still get in contact with our offices worldwide.
There are two ways to access Acer for technical support and information:
• Internet service worldwide (www.acersupport.com)
• Technical support numbers in various countries
You can view a list of technical support numbers by following these steps:
1 Click on Start, Settings, Control Panel.
2 Double-click on System.
3 Click on the Support Information button.
Before you call
Please have the following information available when you call Acer for online service, and please be at your computer when you call. With your support, we can reduce the amount of time a call takes and help solve your problems efficiently.
If there are error messages or beeps reported by your computer, write them down as they appear on the screen (or the number and sequence in the case of beeps).
You are required to provide the following information:
Name:______________________________________
Address:____________________________________
___________________________________________
Telephone number:___________________________
Machine and model type:______________________
Serial number:_______________________________
Date of purchase:____________________________
69
70 Troubleshooting
Appendix A
Specifications
This appendix lists the general specifications of your computer.
73
Microprocessor
• Mobile AMD Athlon
TM
64 processor
Memory
• Main memory expandable to 2GB
• Dual 200-pin soDIMM sockets
• Support 256M, 512M & 1GB DDR SDRAM
• 512 KB flash ROM BIOS
Data storage
• One high-capacity E-IDE hard disk
• One high speed optical drive
Display and video
• Thin-Film Transistor (TFT) liquid crystal display (LCD) displaying 32bit true color up to 1400 x 1050 Super eXtended Graphics Array
(SXGA
+
) resolution for 15.0”
• Simultaneous LCD and CRT display support
• DualView
TM
• S-video for output to a television or display device that support Svideo input
• “Automatic LCD dim” feature that automatically selects the best setting for the display in order to conserve power
Audio
• AC'97 stereo audio
• Dual speakers and one internal microphone
• Separate audio ports for headphone-out, line-in and microphonein devices
Keyboard and pointing device
• 84-/85-/88-key Windows keyboard
• Ergonomically-centered touchpad pointing device with 4-way scroll button
74 Appendix A Specifications
I/O ports
• One Type II CardBus PC Card slot
• One RJ-45 network jack (Gigabit Ethernet)
• One RJ-11 modem jack (V.92, 56K)
• One DC-in jack
• One parallel port (ECP/EPP)
• One VGA port for external monitor
• One speaker/headphone-out jack (3.5mm mini jack)
• One audio line-in jack (3.5mm mini jack)
• One microphone-in jack (3.5mm mini jack)
• One IEEE 1394 port
• One S-video TV-out port
• Four USB 2.0 ports
• One FIR port (IrDA)
• 4-in-1 Card Reader
Weight and dimensions
• 15.0”-display model:
3.01 kg (6.64 lbs)
330(W) x 272(D) x 31.8(H) mm
Environment
• Temperature:
Operating: 5°C ~ 35°C
Non-operating: -20°C ~ 65°C
• Humidity (non-condensing):
Operating: 20% ~ 80% RH
Non-operating: 20% ~ 80% RH
System
• ACPI support
• SMBIOS 2.3 support with asset tag capability
• Microsoft® Windows® operating system
Power
• 65Wh 8-cell Li-Ion battery pack
• 90-Watt AC adapter, auto sensing 100~240 Vac, 50~60Hz
Options
• 512 MB or 1 GB memory upgrade module
• Additional AC adapter
• Additional battery pack
• USB Floppy drive
• 802.11g wireless LAN
75
76 Appendix A Specifications
Appendix B
Notices
This appendix lists the general notices for your computer.
Energy Star Guidelines Compliance
As an Energy Star Partner, Acer Inc. has determined that this product meets the Energy Star guidelines for energy efficiency.
79
FCC notice
This device has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this computer.
80 Appendix B Notices
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-
003 du Canada.
Declaration of Conformity for EU countries
Hereby, Acer, declares that this Ferrari 3200 is in compliance with the essential requirements and other relevant provisions of Directive 1999/
5/EC. (Please visit www.acer.com/about/certificates/nb for complete documents.)
Modem notices
Notice for USA
This equipment complies with Part 68 of the FCC rules. Located on the bottom side of the modem is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number
(REN) for this equipment. Upon request, you must provide this information to your telephone company.
If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But, if advance notice is not practical, you will be notified as soon as possible. You will also be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.
If this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If
81 the problem is with the equipment, discontinue use and contact your dealer or vendor.
Caution: To reduce the risk of fire, use only No. 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord.
TBR 21
This equipment has been approved [Council Decision 98/482/EC - "TBR
21"] for single terminal connection to the Public Switched Telephone
Network (PSTN). However, due to differences between the individual
PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact your equipment supplier in the first instance.
List of Applicable Countries
EU member states as of April 2003 are: Belgium, Denmark, Germany,
Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands,
Austria, Portugal, Finland, Sweden, and the United Kingdom. Usage allowed in the countries of European Union, as well as Norway,
Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use.
Notice for Australia
For safety reasons, only connect headsets with a telecommunications compliance label. This includes customer equipment previously labelled permitted or certified.
82 Appendix B Notices
Notice for New Zealand
For Modem with approval number PTC 211/03/008
1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
2 This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed.
Telecom will accept no responsibility should difficulties arise in such circumstances.
3 Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with
Telecom's Specifications: a b
There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
The equipment shall go on-hook for a period of not less than
30 seconds between the end of one attempt and the beginning of the next call attempt.
4 Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits for compliance with Telecom's specifications, the associated equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.
5 This equipment shall not be set up to make automatic calls to
Telecom's 111 Emergency Service.
83
For Modem with approval number PTC 211/01/030
1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
2 This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed.
Telecom will accept no responsibility should difficulties arise in such circumstances.
3 This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing.
4 Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should NOT contact the telecom Fault Service.
5 This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
6 Under power failure conditions this appliance may not operate.
Please ensure that a separate telephone, not dependent on local power, is available for emergency use.
7 Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with
Telecom's specifications, the associated equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing.
8 This equipment shall not be set up to make automatic calls to
Telecom's 111 Emergency Service.
84 Appendix B Notices
Important safety instructions
Read these instructions carefully. Save them for future reference.
1 Follow all warnings and instructions marked on the product.
2 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3 Do not use this product near water.
4 Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
5 Slots and openings are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
6 This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
7 Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
8 If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
10 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
11 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a When the power cord or plug is damaged or frayed.
b If liquid has been spilled into the product.
c If the product has been exposed to rain or water.
85 d If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
e If the product has been dropped or the case has been damaged.
f If the product exhibits a distinct change in performance, indicating a need for service.
12 The Ferrari 3200 uses the lithium battery.
Replace the battery with the same type as the product's battery we recommend in the product specification list. Use of another battery may present a risk of fire or explosion.
13 Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly.
14 Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type:
UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).
15 Always disconnect all telephone lines from the wall outlet before serving or disassembling this equipment.
16 Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
Laser compliance statement
The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPO-
SURE TO BEAM.
APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET NICHT DEM STRAHLL AUSSETZEN
86 Appendix B Notices
PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE
EXPONERSE A LOS RAYOS.
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ
TUIJOTA SÅTEESEENSTIRRA EJ IN I STRÅLEN
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN
I STRÅLEN
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I
STRÅLEN
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction.
Macrovision® copyright protection notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098,
4,907,093, and 6,516,132 licensed for limited viewing uses only.
Radio Device Regulatory Notice
Note: Below regulatory information is for models with wireless LAN and/or Bluetooth™ only.
87
General
This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use.
Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth™ modules). Below information is for products with such devices.
European Union (EU)
This device complies with the essential requirements of the European
Council Directives listed below:
73/23/EEC Low Voltage Directive
• EN 60950
89/336/EEC Electromagnetic Compatibility (EMC) Directive
• EN 55022
• EN 55024
• EN 61000-3-2/-3
99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE)
Directive
• Art.3.1a) EN 60950
• Art.3.1b) EN 301 489 -1/-17
• Art.3.2) EN 300 328-2
Note: The applicable number varies according to the different Notified Body ID
No. applied to the wireless module installed in this product. These numbers are subject to change without notice.
List of Applicable Countries
EU member states as of April 2003 are: Belgium, Denmark, Germany,
Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands,
Austria, Portugal, Finland, Sweden, and the United Kingdom. Usage allowed in the countries of European Union, as well as Norway,
Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use.
88 Appendix B Notices
The FCC RF safety requirement
The radiated output power of Wireless LAN Mini-PCI Card and Bluetooth Card is far below the FCC radio frequency exposure limits. Nevertheless, the Ferrari 3200 shall be used in such a manner that the potential for human contact during normal operation is minimized as follows.
1 Users are requested to follow the RF safety instructions on wireless option devices that are included in the user’s guide of each RF option device.
Caution: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm (8 inches) must be maintained between the antenna for the integrated
Wireless LAN Mini-PCI Card built in to the screen section and all persons.
89
Note: Acer Dual-Band 11b/g Wireless Mini PCI Adapter implements transmission diversity function. The function does not emit radio frequencies simultaneously from both antennas. One of the antennas is selected automatically or manually (by users) to have good quality of radiocommunication.
2 An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty.
Canada - Low power license-exempt radiocommunication devices (RSS-210)
a. Common information
Operation is subject to the following two conditions:
This device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device.
b. Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is intended to be operated indoors and installed outdoors is subject to licensing.
Exposure of humans to RF fields (RSS-102)
Ferrari 3200 employs low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site at www.hc-sc.gc.ca/rpb.
90 Appendix B Notices
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Tel : 886-2-2696-1234
Fax : 886-2-2696-3535 www.acer.com
Declaration of Conformity for CE marking
We,
Acer Inc.
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih,
Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai
Tel: 886-2-8691-3089 Fax: 886-2-8691-3000
E-mail: [email protected]
Hereby declare that:
Product:
Trade Name:
Model Number:
Machine Type:
SKU Number:
Notebook PC
Acer
ZI5
Ferrari 3200
Ferrari 320xxx
(“x” = 0~9, a ~ z, or A ~ Z)
Is in compliance with the essential requirements and other relevant provisions of the following EC directives.
Reference No. Title
89/336/EEC
73/23/EEC
1999/5/EC
Electromagnetic Compatibility (EMC directive)
Low Voltage Directive (LVD)
Radio & Telecommunications Terminal Equipment Directive (R&TTE)
The product specified above was tested conforming to the applicable Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue to comply with the requirements.
---------------------------
Easy Lai/ Director
Qualification Center
Product Assurance, Acer Inc.
2004/3/16
------------------
Date
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:
Model Number:
Machine Type:
SKU Number:
Name of Responsible Party:
Address of Responsible Party:
Contact Person:
Phone No.:
Fax No.:
Notebook Personal Computer
ZI5
Ferrari 3200
Ferrari 320 xxx
(“x” = 0~9, a ~ z, or A ~ Z)
Acer America Corporation
2641 Orchard Parkway, San Jose
CA 95134, U. S. A.
Mr. Young Kim
408-922-2909
408-922-2606
91
92 Appendix B Notices
Index
A
audio 25 adjusting the volume 25
B battery pack
charging 35 checking charge level 35 installing 35
brightness
C
care
CD
CD-ROM
charging
cleaning
computer
93
connections
D
DVD
E
F
FAQ. See frequently-asked questions
floppy drive
G
H
Hibernation mode
I
94
K
keypad
L
M memory
microphone
modem
mouse
N
Notebook Manager
notice
numeric keypad
O
options
spare AC adapter 47 spare battery 47
P
PC Card
printer
DVD 66 floppy drive 66 keyboard 66
R
S safety
security
keylock 29 passwords 29 smart card 29
service
software
speakers
Standby mode
status indicators 12 status LCD 12
support
T
Index
travel
U
USB
95
V volume
W warranty
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project