Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
Hand finished
craftsmanship
Model PW362718
Classic stainless
steel finish
Decorative rail
(optional)
Stainless steel
baffle filters
Location of
rating plate
Model PW362718R
Rail Option
Recessed easyaccess controls
Welded seams
and hemmed edges
Halogen lighting
Infinite-speed
blower control
Model PW362718R shown with decorative rail.
Wolf Pro 27" (686) deep wall hoods
are available in the classic stainless steel
finish. Rail option hoods (R) come with a
classic stainless steel decorative rail and
stand-offs. Optional platinum or brass
rails match dual fuel range bezels. Pro
wall hoods are sold as a shell only;
internal, in-line and remote blower
options are available.
Wolf Pro wall hoods provide the ultimate in
ventilation. With standard elements like heat sentry
and dual setting halogen lighting, Wolf elevates the
need for ventilation to an enjoyable perk.
Pro 27" (686) deep wall hoods are available in the
classic stainless steel finish. You also have the option
of a decorative rail. While a classic stainless steel rail
is standard on (R) models, platinum or brass rails are
available to match the bezels of our dual fuel ranges
and sealed burner rangetops.
The deepest of the Pro wall hoods, this 27" (686)
model provides an additional exclusive feature—heat
lamps.
Pro wall ventilation hoods are recommended for use
with all Wolf cooking appliances. For optimal performance, a Pro 27" (686) deep wall hood is recommended
for use with ranges and rangetops that contain a
charbroiler or griddle.
Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07
1
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
F E AT U R E S
36" (914) wide wall ventilation hood with
classic stainless steel finish
Infinite-speed blower control
Heat sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Halogen lighting with two settings
Heat lamps—bulbs not included
Internal, in-line and remote blower options
Removable, dishwasher-safe, restaurantgrade stainless steel baffle filters
Heavy-duty 16-gauge brushed stainless steel
construction
Transition with backdraft damper included
Stainless steel enclosed liner
CSA listed to US and Canadian safety
standards
Continually welded seams, hemmed edges
and sides and hand finished craftsmanship
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com
Recessed easy-access controls
OVERALL DIMENSIONS
12"
(305)
18"(457)
OVERALL
HEIGHT
4"(102)
27" (686)
OVERALL DEPTH
36" (914)
OVERALL WIDTH
Model PW362718
12"
(305)
3/4" (19)
DIAMETER
OF RAIL
18"(457)
OVERALL
HEIGHT
4"(102)
36" (914)
OVERALL WIDTH
27" (686)
OVERALL DEPTH
2"
(51)
Model PW362718R with Rail
Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
BLOWER OPTIONS
S P E C I F I C AT I O N S
600 CFM Internal Blower
810559
Overall Width of Hood
36" (914)
900 CFM Internal Blower
811131
Overall Height of Hood
18" (457)
1100 CFM In-Line Blower
808332
900 CFM Remote Blower
801641
Overall Depth of Hood
(including rail)
27" (686)
29" (737)
1200 CFM Remote Blower
801642
1500 CFM Remote Blower
804701
Refer to Pro Ventilation Recommendations
at the end of this section.
ACCESSORIES
Platinum or brass decorative rail
and stand-offs
38" (965) high classic stainless
steel backsplash with or without
warming racks
Internal Blower Options
600 or 900 CFM
In-Line Blower Option
Remote Blower Options
1100 CFM
900, 1200 or 1500 CFM
Discharge
Vertical or Horizontal*
Duct Size
10" (254) Round
Electrical Supply Requirements
Shipping Weight (shell only)
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
99 lbs (45 kg)
*Horizontal discharge applications require a horizontal discharge kit.
Specifications are subject to change without notice.
6" (152), 12" (305), 18" (457) and
24" (610) classic stainless steel
duct covers
Horizontal discharge kit
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
I N S TA L L AT I O N S P E C I F I C AT I O N S
LOCATION OF 6"
ELECTRICAL (152)
E
5"
(127)
18" (457)
HEIGHT
OF HOOD
36" (914)
WIDTH OF HOOD
30" TO 36"
30" TO 36"
(762–914)
TO COUNTERTOP
(762–914)
TO COUNTERTOP
27" (686)
DEPTH OF HOOD
NOTE: 27" (686) deep wall hoods can be vertical or horizontal discharge.
DIMENSIONS
Overall Width of Hood
36" (914)
Overall Height of Hood
18" (457)
Overall Depth of Hood (excluding rail)
27" (686)
Countertop to Bottom of Hood
Location of Electrical
30" (762) to 36" (914)
Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
I N S TA L L AT I O N N OT E S
Refer to the illustrations and specifications
for overall dimensions and installation specifics.
IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.
Wolf Pro wall ventilation hoods are recommended for use with any Wolf cooking appliance, and should be as least as wide as the
cooking surface. It is recommended that the
hood overlap the cooking surface by 3" (76) on
either side.
Pro wall hoods require a separate, grounded
110/120 V AC, 60 Hz power supply. The service
should have its own 15 amp circuit breaker.
Placement of the electrical supply is not critical,
as long as you provide enough 120 V AC, 60 Hz
power cable to make the electrical connection.
Locate electrical within the shaded area shown
in the Installation illustration on page 4.
IMPORTANT NOTE: For optimal performance, a
Pro 27" (686) deep wall hood is recommended
for use with ranges and rangetops that contain
a charbroiler or griddle.
Installation of all Pro ventilation hoods
should be 30" (762) to 36" (914) from the
bottom of the hood to the countertop. Follow
the dimensions shown in the Installation
illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the installation instructions shipped
with each Wolf product for detailed specifications. This information can also be found on
our website, wolfappliance.com.
Wolf Pro wall hoods are shipped without a
blower assembly. Internal, in-line or remote
blower assemblies are available. Blower options
also vary with the volume of air that needs to
be moved and the length of the duct run. Refer
to the charts at the end of this section for Pro
ventilation recommendations and blower
options.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
D U C T I N G C O N S I D E R AT I O N S
Wolf Pro 27" (686) deep wall hoods are shipped
without the blower assembly. Internal, in-line
and remote blower assemblies are available.
Local building codes may require the use of
make-up air. Consult your local HVAC professional for specific requirements in your area.
IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.
IMPORTANT NOTE: Wolf Pro 27" (686) deep
wall hoods must be vented to the outside. Use
only metal ductwork.
Pro 27" (686) deep wall hoods have a vertical
discharge. A horizontal discharge kit is available
as a sales accessory.
The hood will operate most efficiently when
ductwork does not exceed 50' (15 m) in length.
Refer to the illustration below for ducting
considerations for Pro 27" (686) deep wall
hoods.
Ducting for Pro 27" (686)
deep wall hoods.
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
10" (254) ROUND DUCT
TRANSITION
22 1/4"W x 9"D TO 10" ROUND
10"H (INCLUDING FLANGES)
SOFFIT OR CABINET
OR DUCT COVER
VERTICAL DISCHARGE
18" (457)
HEIGHT OF HOOD
WALL HOOD
27" (686)
DEPTH OF HOOD
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
NOTE: HORIZONTAL DISCHARGE REQUIRES AN ACCESSORY KIT.
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
WOLF BLOWER ASSEMBLIES
A ventilation system must include a blower
assembly. Wolf ventilation hoods are shipped
without the blower assembly. An internal, in-line
or remote blower assembly must be selected to
accommodate the cooking appliance, CFM
requirements and homeowner preferences.
Internal, in-line and remote blower assemblies
are available as sales accessories through your
Wolf dealer.
Internal blowers are mounted inside the hood
canopy. In-line blowers are mounted in between
the hood and the exterior of the home. Remote
blowers can be mounted on the roof or in some
cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and
remote blowers.
Pro ventilation recommendation charts on the
following page provide minimum CFM recommendations according to the cooking appliance
and ventilation hood used and blower options
for each specific Pro 27" (686) deep wall hood.
IMPORTANT NOTE: Use only a Wolf blower
with all Wolf ventilation products.
24 7/8"
(632)
24 3/8"
(619)
18"
11 3/4"
12"
(457)
(298)
(305)
18 1/2"
(470)
4 1/2"
8"
(114)
(203)
211/2"
22"
12 1/4"
(546)
18"
(559)
(457)
(311)
In-line BLOWER-60IL
In-line BLOWER-110IL
21" (533)
18" (457)
20 3/4"
(527)
28 1/4"
(718)
(254)
29 1/2"
(749)
10" (254)
Diameter
15 1/2"
24 1/2"
(622)
14"
14 3/4"
29 1/2"
(375)
(749)
24 3/4"
(629)
Remote BLOWER-60REM and
BLOWER-90REM
14 3/4"
29 1/2"
(375)
(749)
(264)
(257)
4 3/4"
(121)
10" (254)
Diameter
10 3/8"
10 1/8"
(356)
(254)
29 1/2"
(749)
10" (254)
Diameter
(394)
10"
10"
22"
(559)
Remote BLOWER-120REM
7 1/4"
(184)
25"
7 1/4"
(635)
(184)
Remote BLOWER-150REM
Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Planning Information
Pro 27" (686) Deep Wall Ventilation Hood
MODEL PW362718(R)
P R O V E N T I L AT I O N C F M R E C O M M E N DAT I O N S
Pro 27" (686) Deep Wall Hoods
Model
PW302718 PW362718 PW422718 PW482718 PW542718 PW602718 PW662718
DF304 / R304 / SRT304
600
600
DF366 / R366 / SRT366 / RT366
900
900
DF364 / R364 / SRT364 / RT364
900
900
RT362
900
900
R488 / RT488
1100
1100
DF486 / R486 / SRT486 / RT486
1100
1100
DF484 / R484 / SRT484 / RT484
1100
1100
DF606 / R606
1500
1500
DF604
1500
1500
Minimum CFM requirements for Wolf ranges and rangetops. CFM recommendations are based on total Btu/hr output.
Additional CFM may be required for charbroilers, griddles and long duct runs.
P R O V E N T I L AT I O N B L O W E R O P T I O N S
Pro 27" (686) Deep Wall Hoods
Blower Description
Blower Number
Wall Hood Models
600 CFM Internal
WBLOWER-60INT (810559)
PW302718 / PW362718 / PW422718
900 CFM Internal
WBLOWER-90INT (811131)
PW302718 / PW362718 / PW422718
1200 CFM Internal
WBLOWER-120INT (810316)
PW482718 / PW542718 / PW602718 / PW662718
600 CFM In-Line
BLOWER-60IL (808331)
PW302718
1100 CFM In-Line
BLOWER-110IL (808332)
All 27" (686) Deep Wall Hoods
600 CFM Remote
BLOWER-60REM (801640)
PW302718
900 CFM Remote
BLOWER-90REM (801641)
PW302718 / PW362718 / PW422718
PW482718 / PW542718
1200 CFM Remote
BLOWER-120REM (801642)
All 27" (686) Deep Wall Hoods
1500 CFM Remote
BLOWER-150REM (804701)
All 27" (686) Deep Wall Hoods
Dimensions in parentheses are in
millimeters unless otherwise specified.
8