Avaya 518-100-701 User's Guide

Add to my manuals
18 Pages

advertisement

Avaya 518-100-701 User's Guide | Manualzz

PARTNER ® Messaging System

User's Guide

518-100-701

Issue 2

May 2003

1 : Choose an option:

If you are at an internal extension, go to Step 2.

If you are at an external telephone, call in on a line answered by PARTNER Messaging Automated Attendant or

Call Answer Service, and press when you hear the menu or greeting. Skip to Step 3.

2 : Dial the PARTNER Messaging extension, , to

access the Voice Messaging system.

3 : Choose an option:

If you are at your own extension, press .

If you are at another telephone, enter your extension number, then press .

4 : Enter your Password, then press .

The first time you log in, your Password is not set. Press # for Step 4, then follow the system prompts to enter your new

Password and record your name.

The system announces the number of new and old messages in your mailbox.

Getting Started

Options

Hints

After you log in, choose an option.

Press... To...

Change your name or Personal Greeting.

Change your Password.

Change Call Answer Mode.

Listen to messages.

Record and send messages.

Access more mailbox options: (Release 6.0 or later.)

Message retrieval order

New message preview

Last heard message

Program Personal Group Lists.

Program Outcalling (if Outcalling permission is activated for your mailbox).

To transfer to another extension at any time, press , then the extension number followed by .

To transfer to another extension using the Directory, press

, then press .

To replay a Voice Messaging menu, press .

To go back to the previous Voice Messaging menu, press .

To return to the Voice Messaging Activity Menu, press .

To replay message header only, press .

To change message status back to new, press .

(Release 6.0 or later)

To return to previous message, press . (Release 6.0 or later)

While a message is playing you can:

Press to pause the playback and again to resume

playback.

Press to raise the volume or to lower it.

Press to rewind the message four seconds and play,

or to skip forward four seconds and play.

Press to increase speed or to decrease.

(Release 6.0 or later.)

Getting Started

Using

Dial Code/

Button

Features

To...

Press...

Call Voice Mail Service or programmed

Voice Mail Auto Dial button.

Turn voice mail coverage on and off

Programmed VMS Cover button.

VMS Coverage is on when the light is on.

Send calls to your mailbox without ringing your extension first

Transfer outside callers to another user's mailbox

Programmed DND button to turn it on (and VMS Cover button if present). If no VMS Cover button is programmed, Automatic VMS must be on.

or programmed

Voice Mailbox Transfer (VMBox) button, then dial the extension number.

Lock your telephone

Feature

Record an active call Programmed Record-a-Call

(RAC) button.

Listen to a caller leaving a message in your voice mailbox

Programmed Call Screening button before the call is answered by the PARTNER

Messaging System.

NOTE:

In some countries, the Voice Mailbox Transfer code is

. Also, some systems allow you to use Voice

Mailbox Transfer form a standard phone by pressing

then the extension number. Check with your

System Manager.

Personalizing Your Mailbox

1 : Log in to Voice Messaging.

2 : Press to change your name recording or greeting.

3 : Press to change your name recording.

4 : Choose an option:

Press to listen to the current name.

Press to record your name.

5 : Record your name, then press .

6 : Choose an option:

Press to approve your name.

Press to play back your name.

Press to re-record your name.

You can have up to 6 different Personal Greetings.

HINT:

If the system is set for Bilingual Mode, you can record your Personal Greeting(s) in both languages. Your greeting(s) should tell the callers they can press to hear the Personal Greeting in an alternate language.

1 : Log in to Voice Messaging.

2 : Press to change your name recording or greeting.

3 : Press to change your greeting.

The system announces the current setting(s).

4 : Enter the greeting number [1–6].

5 : Choose an option:

If the system is set for Monolingual Mode, go to Step 6.

If the system is set for Bilingual Mode, press to

record your greeting in the Primary Language, or press

to record your greeting in the Secondary Language.

Then go to Step 6.

6 : Choose an option:

Press to listen to your greeting.

Press to record your greeting.

Press to delete your greeting.

continued...

Personalizing Your Mailbox

Greeting

(continued)

7 : Record your greeting, then press .

8 : Choose an option:

Press to approve your greeting.

Go to Step 6 of Activating a Personal Greeting.

Press to play back your greeting.

Press to re-record your greeting.

Press to delete the greeting just recorded.

9 : Do one of the following:

Activating a Personal Greeting.

If greeting is currently active, choose one of the

following:

Press to keep current activation setting.

Press to change, then go to Step 6 of

Activating a Personal Greeting.

You can record up to 6 Personal Greetings. Activate the Personal

Greeting you want a caller to hear. You can activate up to 2

Personal Greetings. You can have 1 greeting for internal calls and

1 greeting for external calls, or you can use the same greeting for both internal and external calls.

1 : Log in to Voice Messaging.

2 : Press to change your name or greeting.

3 : Press to change your greeting.

4 : Press to activate a greeting.

If a Personal Greeting is not active, the system greeting is used.

5 : Choose an option:

Enter the number of the greeting you want to activate.

Press to activate the system default greeting.

6 : Choose an option:

Press to use this greeting for all calls.

Press to use this greeting for internal calls only.

Press to use this greeting for external calls only.

Press if finished.

Personalizing Your Mailbox

Your Personal Operator is the person you want to handle your calls when the caller needs immediate assistance and you are not available. In your greeting, be sure to mention that callers can press to reach your Personal Operator or the System Operator.

1 : Log in to Voice Messaging.

2 : Press to change your Personal Operator.

3 : Choose an option:

Enter your Personal Operator's extension, then press .

Press to delete your Personal Operator.

Press if finished.

1 : Log in to Voice Messaging.

2 : Press to change your Password.

3 : Enter the new Password, then press .

4 : Re-enter the new Password, then press .

Call Answer Mode determines whether or not the system allows callers to leave a message after listening to your Personal Greeting.

When your mailbox is in Record Mode, callers can leave a message; when it is in Answer-Only Mode, they cannot. Auto-Copy Mode

(Release 6.0 or later) allows you to designate that a copy of all messages left in your mailbox also be left in another mailbox. The caller leaving the message is not aware of this unless you explain it in your Personal Greeting. Private messages are not copied to the other mailbox.

1 : Log in to Voice Messaging.

2 : Press to change Call Answer Mode.

3 : Choose an option:

Press for Answer-Only Mode.

Press for Auto-Copy Mode. Then do one of the following:

Enter destination extension, then press .

If mailbox is already in Auto-Copy Mode, do one of the following:

Press to keep current destination.

To change current destination, enter new destination

extension, then press .

The Call Answer Mode of the destination mailbox must be set to

Record Mode in order for Auto-Copy to work.

Your Messages

You can assign Priority, Private, and/or Return Receipt categories to messages you send. New Priority messages are heard first when listening to new messages. Private messages cannot be forwarded.

Return Receipt messages notify you when the message is listened to by the recipient. You can assign one, two, or all three categories to a message. In Release 6.0 or later, you can receive an Auto-Copy message, which is sent to you by an originating mailbox that has designated your mailbox as an Auto-Copy destination. The message header indicates the mailbox where the message originated and that the message is an Auto-Copy.

1 : Log in to Voice Messaging.

2 : Press to get messages.

The system plays the message header.

3 : Choose an option:

Press to listen to the message body.

Press to skip the message. (The message will

remain as "new" until you listen to the body.)

Press to delete the message.

HINTS:

While the message plays, you can choose additional options:

Press to pause and again to resume.

Press to rewind four seconds and play.

Press to skip forward four seconds and play.

Press to increase volume or to decrease volume.

Press to increase speed or to decrease. Change in speed lasts for current Voice Messaging connection. (Release 6.0 or later.)

4 : After the message plays, choose an option:

Press to save (skip) the message.

Press to replay the message.

Press to replay the header only.

Press to change the message status back to new,

then press to go to the next message. The next time you

log in for messages, you will hear this as a new message.

(Release 6.0 or later.)

Press to return to the previous message. Repeatedly

press to backup to the desired message. (Release 6.0 or later.)

Press to respond to the message (see next section).

Your Messages

1 : After the recorded message plays, press to

2 : Choose an option:

sender must have a mailbox in the system.)

Press to forward the recorded message.

Press to return the call to an internal sender.

3 : Record your message, then press again.

4 : Choose an option:

Press to approve. (if replaying, skip to step 7.)

Press to play back your comments.

Press to re-record your comments.

Press to cancel replying or forwarding.

5 : If forwarding, do one of the following:

Press and a Group List number, then . Use

Personal Group Lists 1–10 or System Group Lists 50–59.

Press to use the Directory. (See Using the Directory.)

Press to delete the last entry.

Repeat Step 5 to address the message to others.

6 : Press when finished addressing.

7 : Choose an option:

Press to make this a Priority message.

Press to request a Return Receipt.

Press to cancel the category.

Press to send the recorded message.

8 : Return to Step 4 of Listening to Messages.

1 : Log in to Voice Messaging.

2 : Press to record a message.

3 : Record your message.

4 : Press when finished recording. continued...

Your Messages

a Message

(continued)

5 : Choose an option:

Press to play back the recorded message.

Press to re-record the message. (Go to Step 3.)

Press to delete the recorded message and return

to the Voice Messaging Activity Menu.

6 : Choose an option:

Press and a Group List number, then . Use

Personal Group Lists 1–10 or System Group Lists 50–59.

Press to use the Directory. (See Using the

Directory.)

Press to delete the last entry.

Repeat Step 6 to address the recorded message to others.

7 : Press when finished addressing.

8 : Choose an option:

Press to make this a Private message.

Press to make this a Priority message.

Press to request a Return Receipt.

Press to cancel the category.

Press to send the recorded message.

To use the Directory to transfer to an extension:

1 : Press then to transfer to a user’s extension.

2 : Enter up to the first ten letters

To use the Directory to address a message, or to add entries to a Group List:

1 : Press to access the Directory.

2 : Enter up to the first ten letters of the name,then .

More Mailbox Options

Options

In Release 6.0 or later, additional mailbox options are available.

Change the Message Retrieval Order _ you can or Last-In First-Out order.

particularly helpful when accessing your new messages remotely from a cell phone. Minimal the last message you heard during your previous message retrieval session.

1 : Log in to Voice Messaging.

2 : Press for more mailbox options.

3 : Press to change the message retrieval order.

4 : Choose an option:

Press to listen to messages in First-In First-Out order.

Press to listen to messages in Last-In First-Out order.

Press when finished.

1 : Log in to Voice Messaging.

2 : Press for more mailbox options.

3 : Press to preview new messages.

Press to immediately begin listening to the first

new message.

Press for options to use while a message is

playing. See Listening to Messages.

Press to exit Preview Mode.

To quickly listen to new messages when you log in to your mailbox, set your message retrieval order to Last-In

First-Out and listen to your messages in Preview Mode.

continued...

More Mailbox Options

1 : Log in to Voice Messaging.

2 : Press for more mailbox options.

3 : Press to listen to the last message you heard.

The system plays the message header.

4 : Press to listen to the message body.

See Listening to Messages for options to use while and after the message plays. You cannot press to skip forward to the next message or to return to the previous message. Both of these options return you to the Voice Messaging Activity

Menu.

If you deleted the last message you heard and exited your mailbox, there is no last message to hear.

Using Personal Group Lists mailboxes without entering each extension individually. You

50 mailboxes in it.

1 : Log in to Voice Messaging.

2 : Press to select Group Lists.

3 : Press to create a list.

4 : Enter the Group List number [1–10], then press .

5 : Choose an option:

Enter the extension of the mailbox, then press .

Press to use the Directory. (See Using the

Directory.)

Press to delete the last entry.

Repeat Step 5 for each mailbox that you want to add.

6 : Press when finished.

1 : Log in to Voice Messaging.

2 : Press to select Group Lists.

3 : Press to review or modify Group Lists.

The system announces the number of entries in the first

Group List.

4 : Choose an option:

Press to review or modify the list. (Go to Step 5).

Press to delete the list.

Press to skip to the next list. (Repeat Step 4).

5 : Choose an option:

Press to skip the extension.

Press to delete the extension.

Press to add an extension, then choose an option:

Enter the extension of the mailbox, then press .

Press to use the Directory. (See Using the Directory.)

6 : Press when finished.

Using Outcalling

If you turn on Outcalling, PARTNER Messaging calls the numbers which you have programmed to signal that a new message has arrived in your mailbox. You can have Outcalling for all messages or just Priority messages.

HINT:

If you choose Outcalling for Priority messages only, give your callers instructions on how to leave a Priority message.

Check with your System Manager to see if your mailbox has been assigned Outcalling privileges.

Outcalling continues until one of the following happens:

During the Outcalling message call, you press to

cancel Outcalling until a new message arrives for you.

You log in to your mailbox and listen to the message.

The interval specified in your Outcalling Schedule expires.

PARTNER Messaging has called all numbers in your Outcalling

List the number of times specified by the Cycles option.

1 : Log in to Voice Messaging.

2 : Press to select Outcalling.

3 : Press then choose an option:

Press to turn Outcalling On for all messages.

Press to turn Outcalling On for Priority messages only.

Press to turn Outcalling Off.

Press to return to the Outcalling menu.

1 : Log in to Voice Messaging.

3 : Press to change your list of Outcalling Numbers.

4 : Choose the entry number [1–5].

If an Outcalling Number is programmed, you hear the Outcalling entry information. If an Outcalling Number is not programmed, you hear, "Entry number x is not used." continued...

Using Outcalling

Numbers

(continued)

5 : Choose an option:

Press to change or add an Outcalling Number.

(Go to Step 6.)

Press to delete the Outcalling Number.

Press to keep the Outcalling Number and return to

the Outcalling menu.

6 : Choose an option:

Press to enter a telephone Outcalling Number.

Press to enter a pager Outcalling Number.

Press to return to the Outcalling menu without

making a change.

7 : Enter the Outcalling Number and wait 5 seconds for

the system confirmation.

See Guidelines for Setting Outcalling Numbers for further details and examples of how to set your Outcalling Numbers.

8 : Choose an option:

When prompted, press if you are finished entering the number. Listen to the Outcalling entry information and go to Step 9 .

Press to enter more digits, then repeat Step 7.

9 : Choose an option:

Press to confirm your entry.

Press to cancel your entry.

Return to Step 4 to program more Outcalling Numbers.

You may enter any combination of up to 60 digits including – , (for a 1.5-second pause), and in an

Outcalling Number. The Outcalling Number can consist of:

to access an outside line (this is required to reach

an external number).

The telephone number and/or paging system numbers

(including area codes, if necessary).

Your paging system Personal Identification Number (PIN),

if any.

A Callback Number, if Outcalling to a pager.

continued...

Using Outcalling

Numbers

(continued)

EXAMPLE:

Your Outcalling Number is a paging system. To place the call, the Voice Messaging system must access an outside line, dial the number, wait several seconds for the paging system to answer, enter your PIN followed by , and a

Callback Number followed by .

The Outcalling Number you would enter is:

To enter this Outcalling Number, you must dial:

(where represents a pause) to allow the Voice

Messaging system time to access an outside line.

to reach your paging system.

to allow several seconds for the paging

system to answer.

followed by as your PIN.

followed by as your Callback Number.

1 : Log in to Voice Messaging.

2 : Press to select Outcalling.

3 : Press to review your Outcalling Numbers.

The system announces your list of Outcalling Numbers.

Your Outcalling Cycles setting determines the number of times the system will call your list of Outcalling Numbers. The default setting is 3 times. It is suggested that you use at least 2 cycles.

1 : Log in to Voice Messaging.

2 : Press to select Outcalling.

3 : Press to change the number of your Outcalling

Cycles.

4 : Choose an option:

Enter the number of times [1–9] your Outcalling List

should be called, then press .

Press to keep the current setting and return to the

Outcalling menu.

Using Outcalling

Your Outcalling Interval is the minimum amount of time

(in minutes) the system will wait before calling the next number in your Outcalling List. The system default is 15 minutes.

1 : Log in to Voice Messaging.

2 : Press to select Outcalling.

3 : Press to change the Outcalling Interval.

4 : Choose an option:

Enter the number of minutes [5–99] for the Outcalling

Interval, then press .

Press to keep the current setting and return to

the Outcalling menu.

You can set the time period during which the system will perform Outcalling for your mailbox. The default schedule is set to perform Outcalling 24 hours a day.

1 : Log in to Voice Messaging.

2 : Press to select Outcalling.

3 : Press to change the Outcalling Schedule.

4 : Choose an option:

Press to change starting time and/or ending time.

Press to keep the current schedule and return to

the Outcalling menu.

5 : Enter the starting time in 24-hour format in the

form hhmm (hh=hour, mm=minute), or to keep

the current starting time, press .

6 : Enter the ending time in 24-hour format in the

form hhmm, or to keep the current ending time,

press .

7 : Choose an option:

Press to approve your new schedule and return to

the Outcalling menu.

Press to re-enter. (Return to Step 5).

Recording/Screening Calls

Using the

Recorda-Call

Feature

This feature allows you to record a conversation while you are active on a call at your extension.

NOTE:

The Record-a-Call feature is not available to all users on all systems. See your System Manager for feature availability.

When on a call you want to record, do the following to begin recording:

1 : Press the preprogrammed Record-a-Call

(RAC) button.

When the system answers, if there is space in

your mailbox, the system will confirm that it will

begin recording.

2 : You and your party should begin speaking.

NOTE:

If the system detects silence for a period of 15 seconds

after you have begun recording a conversation, the

system automatically turns off the Record-a-Call feature.

If this happens you can begin recording again by pressing

the Record-a-Call button. When you resume recording, the

system saves the new recording as a separate message.

3 : To stop recording the conversation, do one of the

following:

Press the Record-a-Call button again. (You will still

be connected to the other party.)

Hang up. (Recording stops and you are

disconnected from your party.) continued...

Recording/Screening Calls

Using the

Call

Screening

Feature

This feature allows you to listen to a caller leaving a message in your voice mailbox.

NOTE:

The Call Screening feature is not available on all systems.

See your System Manager for feature availability. For more information about using this feature, see the instructions that came with your communications system.

You must have a Call Screening button programmed

on your telephone in order to use this feature. This

feature must be programmed by the System Manager.

You must activate this feature before or while the

incoming call is ringing at your telephone.

(It cannot be activated after the call has been sent to

the Voice Messaging system.)

You cannot be active on another call while using this

feature.

To use Call Screening:

Press the preprogrammed Call Screening button to

have your telephone begin screening incoming calls

automatically.

If you want to speak to the calling party, pick up your

phone's handset and begin speaking. The Voice

Messaging system will say goodbye.

Press the preprogrammed Call Screening button to

turn off this feature when you no longer want to

screen calls.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement