advertisement
SM032 | Bicycle / Motorcycle Handlebar Mount & Water-Resistant Mobile Phone Holder
SM-WPCS
Water-resistant
Mobile Phone Holder
Package Contents:
(1) GN032-SBH - Bicycle or motorcycle handlebar mount with
swivel tightening ring
(1) SM-WPCS-WS - Water-resistant mobile phone holder with
set screw.
GN032-SBH
Bicycle or Motorcycle
Handlebar Mount
Set Screw
Fits handlebars up to 33mm diameter. Compatible with most straight, drop, trekking, touring, and standard (25.4mm and 26mm) size handlebars. Also for use with golf carts,
ATVs, snowmobiles, hang gliders or other apparatus having cylinder-shaped frames or posts.
Bicycle Handlebar Mounting
Step 1.
Choose a safe location on the handlebars of your bicycle in which to mount the pedestal.
Step 2.
Using a screwdriver, remove the two mounting screws (A) in order to release the ball plate and swivel head (B) so the mount can be placed around the handlebars. Ensure the screw nuts (C) are not lost when loosening the screws.
C
A
!
Precaution: A set screw has been provided to be installed into the back side of the water resistant holder to secure it to the handlebar pedestal. Ensure that the screw is properly installed to prevent the holder from falling from the pedestal.
Step 4.
Connect the dual T-tabs (G) on dual T-tab adapter head to the dual T-slots (H) on the water-resistant mobile phone holder.
Insert the set screw (I) into the set screw hole (J) and screw in tightly to prevent the pedestal head from slipping off .
H
B
C
G
J
I
A
Step 3.
Wrap the rubber rings (D) around the handlebar and reassemble the ball plate and swivel head (E) around the rubber rings. Secure the mount assembly by using the screwdriver to retighten the two mounting screws into the screw nuts
(F) through the screw holes.
Connect Water-resistant Mobile Phone Holder to Pedestal
Step 5.
Snap the dual-T head adapter plate (K) onto the handlebar mount ball (L). Adjust the angle as needed and screw the threaded tightening (M) ring onto the adapter plate until the plate is securely held in place.
F
K
E
M
L
D
F
!
Safety Precautions
Do not reposition the pedestal while cycling or driving. Arkon
Resources, Inc. does not promote the adjustment of mobile devices except when the bicycle or vehicle is safely parked or stopped.
Arkon is not responsible for any damages caused to your bicycle, your device, or yourself due to the installation or use of this product.
®
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
The Mobile Mounting Specialists™
Monday - Friday 9 am - 5 pm, PST www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2010 Arkon Resources, Inc.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project