www.senabluetooth.com
User's Guide
SPH10H
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SPH10H™,
SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its
subsidiaries. These trademarks may not be used without the express permission of Sena.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is
under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd.
or its subsidiaries. TomTom™ is the trademark or registered trademark owned by TomTom International B.V. Other
trademarks and tradenames are those of their respective owners.
English
© 1998-2012 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing
prior notice.
SPH10H
CONTENTS
1. INTRODUCTION
2. PACKAGE CONTENTS
3. INSTALLING THE SPH10H ON YOUR HELMET
4. POWERING ON/OFF AND CHARGING
3
4
5
6
4.1 Powering On
6
4.2 Powering Off
6
4.3 Charging
6
4.4 Low Battery Warning
7
4.5 Checking the Battery Level
7
5. VOLUME ADJUSTMENT
7
6. PAIRING THE SPH10H WITH BLUETOOTH DEVICES
8
6.1 Mobile Phone Pairing
8
6.2 Bluetooth Stereo Device Pairing
8
6.3 Bluetooth GPS Navigation Pairing
9
6.4 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter
11
7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE 12
7.1 A2DP Stereo Music Only
12
7.2 HFP for Phone Call Only
13
8. INTERCOM PAIRING
13
8.1 Pairing with Other SPH10H Headsets for Intercom Conversation
13
8.2 Pairing with Other Sena Headset Models for Intercom Conversation
14
9. SPH10H CONFIGURATION SETTING
15
9.1 Enabling/Disabling Voice Activated Phone Answering
15
9.2 Enabling/Disabling Voice Activated Intercom
16
9.3 Enabling/Disabling Voice Prompts
16
9.4 Enabling/Disabling PLC (Packet Loss Consealment)
17
9.5 Delete All Bluetooth Pairing Information
17
9.6 Exit Voice Configuration Menu
17
10. FUNCTION PRIORITY
18
11. STEREO MUSIC
18
11.1 By Stereo Audio Cable
18
11.2 By Bluetooth Wireless Stereo
18
12. MOBILE PHONE CALL MAKING AND ANSWERING
20
13. TWO-WAY INTERCOM
21
13.1 Start and End Two-way Intercom
21
13.2 Intercom and Mobile Phone Call
13.3 Intercom and GPS
13.4 Intercom and Two-way Radio
14. THREE-WAY CONFERENCE INTERCOM
14.1 Start Three-way Intercom
14.2 End Three-way Intercom
15. FOUR-WAY CONFERENCE INTERCOM
15.1 Start Four-way Intercom
15.2 End Four-way Intercom
16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM
PARTICIPANT
17. INTERCOM FAILURE
18. INTERCOM RECONNECTION
19. RESET TO FACTORY DEFAULT SETTINGS
20. FAULT RESET
21. FIRMWARE UPGRADE
22. CASE STUDY
BATTERY INFORMATION
MAINTENANCE AND CARE
DISPOSAL
CERTIFICATION AND SAFETY APPROVALS
•
•
•
•
•
•
FCC Compliance Statement
FCC RF Exposure Statement
FCC Caution
CE Declaration of Conformity
Industry Canada Statement
Bluetooth License
WAIVER AND GENERAL RELEASE
• Two-Year Limited Warranty
• Limitation of Liability
• Return for Full Refund
WARNING
21
22
22
23
23
24
25
25
25
26
27
27
27
28
29
29
32
33
34
34
34
34
34
34
34
36
36
38
39
39
40
SPH10H
Thank you for choosing the Sena SPH10H, Bluetooth
Stereo Headset and Intercom for Half Helmets. With
the SPH10H, you can call handsfree on your Bluetooth
mobile phone, listen to stereo music or voice instructions
of GPS navigations by Bluetooth wirelessly, and have
intercom conversations in full duplex with a passenger or
other motorcycle riders.
The SPH10H is compliant with the Bluetooth 3.0
supporting the following profiles: Headset Profile,
Hands-Free Profile (HFP), Advanced Audio Distribution
Profile (A2DP), and Audio Video Remote Control Profile
(AVRCP). Please check with the manufacturers of other
devices to determine their compatibility with this headset.
Please read this user’s guide carefully before using the
headset. Also check www.senabluetooth.com/support
for the latest version of the user’s guide and additional
information related to Sena Bluetooth products.
The SPH10H features:
• Bluetooth handsfree for Bluetooth mobile phones
•B
luetooth stereo headset for Bluetooth audio devices
such as MP3 players
•B
luetooth stereo headset for Bluetooth GPS navigations
• Bluetooth intercom up to 500 meters (540 yards)*
• Four-way conference intercom
•T
hree-way conference phone call with intercom
participant
• Multipoint
Bluetooth pairing with GPS navigation or
Sena SR10 Two-way Radio Adapter
• Multipoint Bluetooth pairing for 2 mobile phones
• Simple
ear pad design for quick installation to half
helmets
• Compatible with shorty helmets in the market
• Stereo music by 3.5mm audio cable
• Firmware upgradeable
English
1. INTRODUCTION
Key Specifications:
• Bluetooth 3.0
•S
upporting profiles: Headset Profile, Hands-Free
Profile (HFP), Advanced Audio Distribution Profile
(A2DP), Audio Video Remote Control Profile (AVRCP)
-------------------------------*in open terrain
3
SPH10H
2. PACKAGE CONTENTS
• SPH10H Headset
Jog Dial
• Answer and end a mobile phone call
• Reject an incoming mobile phone call
• Start and end intercom conversation
• Volume adjustment by rotating
• Play and pause Bluetooth stereo device
•T
rack-forward and track-back by rotating
while pressing the button
• Enter into intercom pairing mode
• Enter into voice configuration setting
• Navigate through configuration menu
DC Power Charging &
Firmware Upgrade Port
Status LED
Speakers
MP3 Jack
[ RIGHT ]
[ LEFT ]
Microphone
4
Phone Button
• Answer and end a mobile phone call
• Redial last number
•C
all transfer between mobile phone and
headset
• Enter into mobile phone pairing mode
•E
nter into Bluetooth stereo device paring
mode
• Enter into factory reset mode
SPH10H
• Cigarette Charger
• Stereo Audio Cable
• Tab Insertion Tool
3. INSTALLING THE SPH10H ON
YOUR HELMET
English
• USB Power and Data Cable
1. Insert the two plastic tabs of the SPH10H on the
headset ear pads into the left and right side of your
helmet. You may use the Tab Insertion Tool located in
the package to help insert the plastic tabs into your
helmet. Place the Tab Insertion Tool against the tab
side with velcro. Insert the tab and insertion tool at
the same time into the helmet. When the tab is in the
proper position, slide the Tab Insertion Tool out. The
velcro will now hold the tab securely in place.
5
SPH10H
2. Please make sure that one of the headset ear pads
with the microphone is located on the left side of your
helmet.
4. POWERING ON/OFF AND CHARGING
To power on and off the headset, you don’t need to press
and hold any button for several seconds. Just short
press the Jog Dial and the Phone Button simultaneously,
and you will get quick on-and-off convenience.
4.1 Powering On
3. Tuck in the cable that connects left and right ear pads,
between the helmet shell and protective padding or
inside the helmet.
Press the Jog Dial and the Phone Button at the same
time for about 1 second to power on. The blue LED turns
on and you will hear ascending beeps.
4.2 Powering Off
Just short press the Jog Dial and the Phone Button
simultaneously, you don’t need to press and hold for
a few seconds. The red LED turns on for a while until
it turns off completely and you will hear descending
beeps.
4.3 Charging
The LED turns on red while charging, and turns to blue
when the headset is fully charged. It takes about 2.5
hours to be completely charged.
6
SPH10H
4.4 Low Battery Warning
4.5 Checking the Battery Level
You can check the battery level in two different ways
when the headset is powering on.
4.5.1 LED Indicator
When the headset is powering on, the red LED flashes
rapidly indicating the battery level.
4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
5. VOLUME ADJUSTMENT
English
When the battery is low, the blinking blue LED in standby mode turns to red and you will hear mid-tone triple
beeps and a voice prompt saying “Low Battery”.
You can easily adjust the volume by rotating the Jog
Dial. You will hear a beep when the volume reaches
maximum or minimum level. The volume is set and
maintained independently at different levels for each
audio source even when you turn off and on the headset.
For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the
volume when you hear Bluetooth MP3 music. So you
can always maintain the preferred optimum volume level
for each audio source.
4.5.2 Voice Prompt Indicator
When you power on the headset, keep pressing the
Jog Dial and Phone Button simultaneously for about
3 seconds until you hear high tone triple beeps. Then
you will hear voice prompt indicating the battery level.
However, if you release the buttons as soon as the
headset turns on, you will not hear the voice prompt of
battery level indication.
7
SPH10H
6. PAIRING THE SPH10H WITH
BLUETOOTH DEVICES
Before using the SPH10H Bluetooth headset with any
of Bluetooth devices for the first time, you need to do
the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as MP3,
or motorcycle specific Bluetooth GPS, and with other
Sena Bluetooth headsets. This pairing operation is only
required once for each Bluetooth device. The headset
will remain paired with the devices and automatically
connects to the paired devices again when they are
within range. You will hear a high tone single beep and a
voice prompt when the headset connects to the paired
device automatically: “Phone connected” to a mobile
phone, “Media connected” to a Bluetooth stereo
device.
6.1 Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps. You will hear a voice
prompt saying “Phone pairing”.
8
2. Search for Bluetooth devices on your mobile phone.
Select the Sena SPH10H in the list of the devices
detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phone may not
ask for the PIN.
4. The mobile phone confirms that pairing has completed
and the SPH10H is ready to use. You will hear a voice
prompt from the SPH10H saying “Your headset is
paired”.
5. If the pairing process is not completed within three
minutes, the SPH10H will return to stand-by mode.
6.2 Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the
mobile phone such as smartphones, you don’t need
to pair the SPH10H with it separately. When the
SPH10H is paired with the mobile phone, it is also
paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device,
follow the paring procedure separately. The procedure
is the same as the procedure in “6.1 Mobile Phone
Pairing”.
SPH10H
1. If Bluetooth connection between the headset and a
mobile phone is disconnected, tap the Phone Button
to recover the Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a
media player is disconnected, press the Jog Dial for 1
second to recover the Bluetooth connection and play.
6.3 Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS
navigation. Some GPS systems use mobile phone
profile (HFP, Hands-Free Profile) and others use stereo
music profile (A2DP, Advanced Audio Distribution
Profile). Most motorcycle specific GPS systems use
mobile phone profile for turn-by-turn voice instruction.
You can simultaneously use a mobile phone and a GPS
which uses mobile phone profile by one of the following
procedures.
navigation. Follow the steps below to pair the GPS using
the multipoint pairing.
1. Turn on the headset and press the Jog Dial for 5
seconds until the red LED is rapidly flashing and you
hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn to
high tone double beeps. You will hear a voice prompt
saying “Multipoint pairing”.
3. Search for Bluetooth devices on the GPS navigation
screen. Select the Sena SPH10H in the list of the
devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS confirms that pairing has completed and the
SPH10H is ready to use. You will hear a voice prompt
from the SPH10H saying “Your headset is paired”.
6. If the pairing process is not completed within three
minutes, the SPH10H will return to stand-by mode.
6.3.1 Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not
for Bluetooth stereo music streaming, multipoint pairing
is recommended for the GPS connection. Multipoint
Bluetooth pairing allows the SPH10H to connect two
HFP devices at the same time: mobile phone and GPS
9
English
Note:
SPH10H
The pairing diagram for multipoint GPS pairing is shown
in the figure below.
support mobile phone bridging over Bluetooth, you can
pair the mobile phone to the GPS to use your mobile
phone. Please refer to the user’s guide of your GPS for
details.
HFP
Smart Phone
GPS
HFP
+ Mobile Phone
Pairing
A2DP
Mobile Phone
HFP
Mobile Phone
+
Pairing
(A2DP)
HFP
SPH10H
Multipoint
Pairing
GPS
Multipoint GPS Pairing
SPH10H
GPS Pairing as Mobile Phone
6.3.2 GPS Pairing as Mobile Phone
If GPS is not only used for turn-by-turn voice instructions
but also is your preferred Bluetooth stereo music source,
you can pair the GPS to the SPH10H by following the
simple procedures in “6.1 Mobile Phone Pairing”. When
you do this, the SPH10H thinks the GPS is a mobile
phone so you can no longer pair your mobile phone to
the SPH10H directly. However, since some GPS systems
10
Note:
You have to use a motorcycle specific GPS which
transmits turn-by-turn voice instruction to the headset
by Bluetooth. Most automotive GPS systems don’t have
this feature.
SPH10H
The Sena SR10 is a Bluetooth two-way radio adapter
for group communication, and uses HFP as do most
motorcycle specific GPS navigation systems. If you
pair the SPH10H with a SR10 by multipoint pairing, the
SPH10H is able to have two HFP devices at the same
time: mobile phone and Sena SR10.
1. Turn on the headset and press the Jog Dial for 5
seconds until the red LED is rapidly flashing and you
hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn to
high tone double beeps. You will hear a voice prompt
saying “Multipoint pairing”.
3. Turn on the SR10 and follow the SR10’s “Bluetooth
Headset Pairing” procedure to complete the process.
Please refer to the SR10 user's guide for details.
4. When the pairing is completed, you will hear a voice
prompt saying “Your headset is paired”.
5. If the pairing process is not completed within three
minutes, the SPH10H will return to stand-by mode.
to music, answer a mobile call, have an intercom
conversation and use a two-way radio via SR10 for group
communication as shown in the figure below. A GPS
navigation or a radar detector which has headphone
jack or audio line-out could be connected to the SR10
by wire. The GPS voice instruction or the radar detector
alarm is also heard in the background via SR10 while
having an intercom conversation or a phone call. Please
refer to the SR10 user's guide for details.
The incoming audio from the two-way radio via SR10
is heard in the background while having an intercom
conversation or a mobile phone call. You can listen
11
English
6.4 Pairing with the Sena SR10, Bluetooth
Two-way Radio Adapter
SPH10H
7. PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
Smart Phone
HFP
+ Mobile Phone
Pairing
A2DP
Wired
Connection
HFP
SPH10H
If you have a MP3 stereo music phone such as a
smartphone, sometimes you may need to selectively
use the SPH10H for A2DP stereo music only or for
mobile phone handsfree only. This instruction is for
advanced users who want to pair the SPH10H to their
smart phones only with one selective profile: A2DP
stereo for music or HFP for phone call.
Two-way radio
Multipoint
Sena SR10
Pairing
Wired
Connection
GPS
Wired
Connection
Radar Detector
Parallel Connection of SR10 and Mobile Phone by
Bluetooth Multipoint Pairing
If you have previously paired a mobile phone to the
SPH10H, you must clear the previous paring list on
both devices; the mobile phone and SPH10H. To clear
the pairing list on SPH10H, please do a factory reset
or follow the pairing list clearing procedure described
in this manual. To clear the pairing list on the mobile
phone, please refer to the mobile phone manual. For
most smart phones, delete the Sena SPH10H from the
list of Bluetooth devices in setting menu.
7.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps.
12
SPH10H
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn to
multiple mid-tone beeps. You will hear a voice prompt
saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10H in the list of devices
detected on your phone.
4. Enter 0000 for the PIN. Some smart phones may not
ask for PIN.
8. INTERCOM PAIRING
English
2. Within 2 seconds, tap the Jog Dial again, then the
LED turns to red flashing and the beeps turn to
double mid-tone beeps. You will hear a voice prompt
saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10H in the list of devices
detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not
ask for PIN.
8.1 Pairing with Other SPH10H Headsets for
Intercom Conversation
The SPH10H can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10H headsets (A and B) that you
would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
to flash rapidly. You will hear a voice prompt saying
“Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets
A or B (It doesn’t matter that you choose A or B.) and
wait until the LEDs of both headsets turn to blue and
intercom connection is automatically established. The
two SPH10H headsets A and B are paired with each
other for intercom conversation. If the pairing process
is not completed within one minute, the SPH10H will
return to stand-by mode.
13
SPH10H
5. The intercom pairing queue is ‘Last-Come, FirstServed’. If a headset has multiple paired headsets
for intercom conversations, the last paired headset is
set as first intercom friend. The previous intercom
friend becomes second intercom friend, and third
intercom friend.
A
B
D
C
Note:
Pairing A & B
4. Y
ou can make other pairings between the headset
A and C, and between the headset A and D by
following the same procedure as above.
A
B
D
C
Pairing A & C
14
A
B
D
C
Pairing A & D
For example, after the pairing procedures listed above,
headset D is the first intercom friend of headset A.
Headset C is the second intercom friend of headset A,
and headset B is the third intercom friend of headset A..
8.2 Pairing with Other Sena Headset Models
for Intercom Conversation
The SPH10H can be paired with all other Sena headset
models such as the SMH10 and the SPH10 for intercom
conversation. Please follow the same procedure as
above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way
conference intercom with the SPH10H or the SPH10.
The SMH5 has a limited capability of having two-way
intercom with each other or with other Sena headsets
such as the SPH10H and the SPH10.
SPH10H
You can set the configuration of the SPH10H by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying “Configuration
menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature
by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10H will exit the configuration and goes back to
stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt,
“Exit configuration”, and tap the Phone Button.
The voice prompt for each menu item is as below:
(1) VOX phone
(2) VOX intercom
(3) Voice prompt
English
9. SPH10H CONFIGURATION SETTING
(4) PLC setting
(5) Delete all pairings
(6) Exit configuration
VOX phone
Exit configuration
VOX intercom
Delete all pairings
Voice prompt
PLC setting
9.1 Enabling/Disabling Voice Activated Phone
Answering
Voice Prompt
“VOX phone”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
If this feature is enabled, you can answer incoming calls
by simply saying a word loudly enough. For example,
when you hear a series of beeps for an incoming call,
15
SPH10H
you can answer the phone by saying “Hello” or any
other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, you have
to tap the Jog Dial or the Phone Button to answer an
incoming call.
9.2 Enabling/Disabling Voice Activated
Intercom
Voice Prompt
“VOX intercom”
Factory Default
Disable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom friend
by speaking any word loudly enough. The most
effortless way to trigger intercom VOX is to blow into
the microphone as if blowing dust off the microphone.
If you start an intercom conversation by VOX, the
intercom terminates automatically when you and your
intercom friend remain silent for 20 seconds. However,
if you manually start an intercom conversation by
tapping the Jog Dial, you have to terminate the intercom
conversation manually.
16
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind
noise. If you tap the Jog Dial to start an intercom
conversation, it is not terminated by 20 seconds of
silence. After turning SPH10H off and on, you can start
intercom by voice again.
9.3 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
SPH10H
Voice Prompt
“PLC setting”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
The PLC (Packet Loss Concealment) algorithm is
enabled from the factory. It improves the audio quality
of the intercom and mobile phone handsfree in the
presence of data packet errors within the Bluetooth
link. It is recommend that this setting is always enabled.
However, if you feel that the audio from the intercom or
mobile phone is distorted in certain circumstances, you
may able to disable this setting and check it.
Button to confirm. Taping the Jog Dial is not available
for this setting.
9.6 Exit Voice Configuration Menu
Voice Prompt
“Exit configuration”
Factory Default
N/A
Enable
Tap the Phone Button
To exit voice configuration menu and get back to standby mode, rotate the Jog Dial until you hear a voice
prompt, “Exit configuration”, and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
Rotate Jog Dial
Tap Phone Button
Tap Jog Dial
VOX Phone
Enable
Disable
VOX Intercom
Enable
Disable
“Delete all pairings”
Voice Prompt
Enable
Disable
Factory Default
N/A
PLC Setting
Enable
Disable
Execute
Tap the Phone Button
Delete All Pairings
Execute
N/A
Exit Configuration
Execute
N/A
9.5 Delete All Bluetooth Pairing Information
Voice Prompt
To delete all Bluetooth pairing information of the
SPH10H, rotate the Jog Dial until you hear a voice
prompt, “Delete all pairings”, and tap the Phone
Voice Configuration Menu & Button Operations
17
English
9.4 Enabling/Disabling PLC (Packet Loss
Consealment)
SPH10H
10. FUNCTION PRIORITY
The SPH10H operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a
higher priority function. For example, stereo music is
interrupted by intercom call, and intercom conversation
is interrupted by incoming mobile phone call.
11. STEREO MUSIC
You can listen to stereo music in two ways: with the
enclosed stereo audio cable or by Bluetooth wireless
stereo.
11.1 By Stereo Audio Cable
Plug your stereo MP3 player directly to the SPH10H
by using the enclosed 3.5mm stereo audio jack
cable. To adjust the volume, rotate the Jog Dial on
the headset. You may adjust the volume on the MP3
player also.
MP3 Jack
11.2 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the
SPH10H by following the “Bluetooth Stereo Device
Pairing” procedures described in the 6.2 chapter.
18
SPH10H
3. To track forward or track back, rotate while pressing
the Jog Dial clockwise or counter clockwise.
Note:
2. To play or pause music, press and hold the Jog
Dial for 1 second until you hear a double beep.
Bluetooth music is available only when the MP3 jack
port remains open. Please make sure the audio cable
is unplugged from the clamp unit to play music by
Bluetooth.
19
English
The SPH10H supports the Audio/Video Remote
Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the
SPH10H to remotely control music playback. You not
only can adjust the volume but also use the functions
such as play, pause, next track and previous track.
1. To adjust the volume, rotate the Jog Dial.
SPH10H
12. MOBILE PHONE CALL
MAKING AND ANSWERING
1. When you have an incoming call, simply tap the
Phone Button or the Jog Dial to answer the call.
2. You can also answer the incoming call by loudly
speaking any word of your choice if Voice Activated
Phone Answering is enabled.
3. To end a call, tap the Phone Button or press the
Jog Dial for 2 seconds until you hear a beep, or
wait for the called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds
until you hear a beep while the phone is ringing.
5. To transfer a call between the mobile phone and
the headset during the phone conversation, press
the Phone Button for 2 seconds until you hear a
beep.
6. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad
and make a call. Then the call is automatically
transferred to the headset.
- For some older mobile phones which do not
automatically transfer calls to the headset, press
the Phone Button after entering phone numbers on
20
the mobile phone keypad.
- Tap the Phone Button in stand-by mode to activate
the voice dialing of your mobile phone. For this,
the voice dialing feature must be available on the
mobile phone. Refer to your mobile phone manual
for further instruction.
- To redial the last number, double tap the Phone
Button in stand-by mode. You will hear a voice
prompt saying “Last number redial”.
Answer
Tap Phone Button or Tap Jog Dial or Say
“Hello”
End
Tap Phone Button or Press Jog Dial for 2”
Reject
Press Jog Dial for 2”
Transfer
Press Phone Button for 2”
Call
Use phone keypad
Redial
Double tap Phone Button
Voice Command
Tap Phone Button
Mobile Phone Call Button Operations
SPH10H
13.1 Start and End Two-way Intercom
1. You can start an intercom conversation with one
of any intercom friends by tapping the Jog Dial:
single tapping to intercom with the first intercom
friend, double tapping with the second intercom
friend, and triple tapping with the third intercom
friend.
Terminate
End Two-way Intercom Conversation
Start
intercom
st
1 Intercom
Friend
nd
2 Intercom
Friend
End
intercom
1st intercom
friend
2nd intercom
friend
3rd intercom
friend
Single tap
Double tap
Triple tap
Single tap
Start & End Two-way Intercom
13.2 Intercom and Mobile Phone Call
3rd Intercom
Friend
Start Two-way Intercom Conversation
2. To terminate an intercom conversation, single
tap the Jog Dial. Any intercom connection with
any intercom friend will be terminated by a single
1. When you have an incoming mobile phone call
during an intercom conversation, you will hear a
ring tone. You can choose whether to 1) answer
the mobile phone call and stop the intercom
conversation, or 2) reject the phone call and stay
on the intercom conversation.
a. To answer the phone call and stop the intercom
conversation, tap the Jog Dial or the Phone
21
English
tapping. A double or triple tapping will do nothing
in this case.
13. TWO-WAY INTERCOM
SPH10H
Button. When you hang up the phone call, the
intercom will automatically be recovered.
b. To reject the phone call and stay on the intercom
conversation, press the Jog Dial for 2 seconds
until you hear a beep.
U
nlike other motorcycle Bluetooth headsets, this
prevents a user from being dropped out of an
intercom conversation by an incoming mobile call.
2. When you have an incoming intercom call during
a mobile phone call, you will hear 4 high tone
beeps, alerting you that there is an incoming
intercom call. You will also hear a voice prompt
saying “Intercom requested”. In this case, the
intercom call does not override the mobile phone
call because intercom has lower priority than
mobile call. You have to hang up the mobile phone
call to make or receive an intercom call.
13.3 Intercom and GPS
If you pair a Bluetooth GPS to the SPH10H as
described in 6.3 of this user's guide, you can hear
the turn-by-turn voice instruction of the GPS while
having an intercom conversation. The GPS voice
instruction interrupts intercom conversation, but it
is automatically reestablished after the GPS voice
instruction ends.
22
GPS
Voice Multipoint
Instruction Pairing
HFP
Mobile Phone
Pairing
Smart Phone
Intercom
SPH10H
Intercom
Pairing
Intercom Friend
Intercom and GPS voice instruction
13.4 Intercom and Two-way Radio
As described in 6.4 of this user's guide, you can use
a two-way radio and SPH10H Bluetooth intercom
simultaneously by using the Sena SR10, a Bluetooth
Two-way Radio Adapter, along with the SPH10H.
Incoming audio from the two-way radio is not
interrupting an intercom conversation but is heard in
background. This is useful when you have an intercom
conversation with a passenger on the back seat and
use a two-way radio for group communication with
other motorcycle riders.
SPH10H
English
14. THREE-WAY CONFERENCE INTERCOM
14.1 Start Three-way Intercom
Smart Phone
Two-way radio
HFP
+ Mobile Phone
Pairing
A2DP
Wired
Connection
Audio from
Two-way Radio
Intercom Intercom
Pairing
Wired
Connection
Sena SR10
Wired
Connection
Radar Detector
g
g
rin
First Friend
(B)
(A)
rin
Intercom and Two-way Radio
i
Pa
Intercom Friend
GPS
Pa
i
SPH10H
Multipoint
Pairing
You (A) can have a three-way conference intercom
with two other SPH10H friends (B & C) by establishing
two intercom connections at the same time. While
a three-way conference intercom is in progress,
mobile phone connection of all three participants
would be temporarily disconnected, but as soon as
the conference intercom terminates or one of the
participants leaves the intercom, all mobile phones
would be automatically reconnected. During the
conference intercom, if you have an incoming mobile
phone call, terminate the conference intercom to
automatically reconnect the mobile phone and
receive the call.
1. You (A) need to be paired with two other friends (B
& C) for three-way conference intercom.
Second Friend
(C)
23
SPH10H
2. Start an intercom conversation with one of the two
friends in your intercom group. For example, you
(A) may start an intercom conversation with the
intercom friend (B). Or intercom friend (B) may
start an intercom call with you (A).
4. Now you (A) and two SPH10H intercom friends (B
& C) are having a three-way conference intercom.
(A)
First Friend
(B)
(A)
Second Friend
(C)
14.2 End Three-way Intercom
First Friend
(B)
Second Friend
(C)
3. The second intercom friend (C) may join the
intercom by making an intercom call to you (A).
(A)
First Friend
(B)
24
Second Friend
(C)
When you are a member of an active three-way
conference intercom, you can completely terminate
the conference intercom or just disconnect an
intercom connection with one of your active intercom
friends.
1. Press the Jog Dial for 1 second until you hear
a beep to terminate three-way conference
intercom completely. It terminates both intercom
connections with (B) and (C).
2. Tap or double tap the Jog Dial to disconnect
intercom connection with one of the two intercom
friends accordingly. For example, by single tapping
the Jog Dial, you can just terminate the intercom
connection with the first intercom friend (B).
SPH10H
Jog Dial Operation
Press for 1”
Result
Disconnect (B) & (C)
Single tap
Disconnect (B)
Double tap
Disconnect (C)
End Three-way Intercom
15. FOUR-WAY CONFERENCE INTERCOM
English
However, you still have the intercom connection
with your second intercom friend (C).
15.1 Start Four-way Intercom
You can have four-way conference intercom with three
other SPH10H users by adding one more intercom
participant to the three-way intercom. While you are
having three-way intercom as above in section 14.1, a
new participant (D), who is an intercom friend of your
intercom friend (C), may join the conference intercom
by making an intercom call to your intercom friend
(C). Please note that in this case, the new participant
(D) is an intercom friend of (C), not of you (A).
You
(A)
New Participant
(D)
= Intercom Friend of (C)
First Friend
(B)
Second Friend
(C)
15.2 End Four-way Intercom
As same in the case of three-way intercom, you
can completely get out of the four-way conference
25
SPH10H
intercom or just disconnect a single intercom
connection.
1. Press the Jog Dial for 1 second until you hear a
beep to terminate four-way conference intercom.
It terminates the intercom connections between
you (A), and your intercom friends (B) and (C).
2. Tap or double tap the Jog Dial to disconnect
the intercom connection with one of the two
intercom friends accordingly. However, when
you disconnect the second friend (C) by double
tapping the Jog Dial, you will be disconnected
with the third participant (D) as well. This is
because the third participant (D) is connected
with you via the second friend (C).
Jog Dial Operation
Press for 1”
Result
Disconnect (B), (C) & (D)
Single tap
Disconnect (B)
Double tap
Disconnect (C) & (D)
End Four-way Intercom
16. THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT
You can have a three-way conference phone call
by adding an intercom friend to the mobile phone
conversation. While having a mobile phone call, make
an intercom call to one of the intercom friends by
tapping the Jog Dial to form a three-way conference call
with the person on the mobile phone line. To disconnect
the intercom first and go back to your private mobile
phone call, terminate the intercom by tapping the Jog
Dial. To end the mobile phone call first and maintain
the intercom conversation, press the Jog Dial for 2
seconds, or tap the phone button, or wait for the person
on the mobile phone line to end the call.
Start
End intercom
first
End phone
call first
Tap Jog Dial while having a mobile phone call
Tap Jog Dial
Press Jog Dial for 2“
or
Tap Phone Button
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
26
SPH10H
When you try to start an intercom conversation with an
intercom friend who is already having a conference
intercom with other riders or a mobile phone call,
you will hear a low tone double beep signifying an
intercom busy signal. In this case, you have to try
again later.
18. INTERCOM RECONNECTION
If your intercom friend goes out of range while having
an intercom conversation, you may hear static noise
and eventually the intercom will be disconnected. In
this case, the SPH10H automatically tries to reconnect
the intercom every 8 seconds and you will hear high
tone double beeps until the intercom is reestablished.
If you don’t want to make a reconnection, tap the Jog
Dial to stop the attempt.
19. RESET TO FACTORY DEFAULT
SETTINGS
English
17. INTERCOM FAILURE
1. To restore the SPH10H to factory default settings,
press and hold the Phone Button for 12 seconds
until the LED shows solid red and you hear double
beeps. You will hear a voice prompt saying
“Factory reset”.
2. Within 5 seconds, press the Jog Dial to confirm
reset. The headset will be restored to factory
setting and switched off automatically. You will
hear a voice prompt saying “Headset reset,
good-bye”.
3. If you don’t press the Jog Dial within 5 seconds,
the reset attempt is canceled and the headset
returns to stand-by mode. You will hear a voice
prompt saying, “Canceled”.
27
SPH10H
20. FAULT RESET
When the SPH10H is not working properly or is in a
faulty status for any reason, you may reset the system
by pushing the pin-hole reset button on the back of the
left headset main unit.
1. Detach the velcro pad inside of the left headset to see
a set-screw on the main module under the ear flap.
2. Turn the set-screw to the left to take the module apart
from the ear flap.
3. Take out the module from the front of the ear flap to
see the reset pin-hole on the opposite side of the
module.
Detach
4. Insert a paper clip into the reset pin-hole and press
the reset button for 1 second with light pressure, at
which time the SPH10H will be switched off. Turn
the SPH10H back on. By powering back on, this will
restore your current settings.
28
SPH10H
The SPH10H supports firmware upgrade function.
Please visit Sena Bluetooth web site at www.
senabluetooth.com to check the latest software
downloads.
22. CASE STUDY
English
21. FIRMWARE UPGRADE
Case 1
•iPhone for mobile phone call and stereo music
streaming
•ZumoTM 550 or ZumoTM 220 for GPS voice instruction
•SPH10H for two-way intercom
iPhone
Mobile Call Pairing: 6.1
Music
Intercom
Conversation
SPH10H
Pairing: 8.1
GPS
Voice
SPH10H
Pairing: 6.3.1 ZumoTM 550 or
ZumoTM 220
29
SPH10H
Case 2
Case 3
•iPhone for mobile phone call and stereo music
streaming
•ZumoTM 660/665 for GPS voice instruction
•SPH10H for two-way intercom
•iPhone for mobile phone call via Zumo 660/665
•ZumoTM 660/665 for GPS voice instruction and
stereo music streaming
•SPH10H for two-way intercom
Pairing: Refer to
ZumoTM 660/665 manual
Mobile
Call
iPhone
ZumoTM 660/665
iPhone
Mobile Call Pairing: 6.1
Music
Intercom
Conversation
SPH10H
Pairing: 8.1
Mobile Call
Music
Pairing: 6.1
GPS Voice
GPS
Voice
SPH10H
Intercom
Conversation
Pairing: 6.3.1 ZumoTM 660/665
SPH10H
30
Pairing: 8.1
SPH10H
SPH10H
Case 4
Case 5
•iPhone for mobile phone call
•iPod Touch for stereo music streaming
•TomTom® Rider2 for GPS voice instruction
•SPH10H for two-way intercom
Feature Phone
iPhone
Mobile Pairing: 6.1
Call
SPH10H
Intercom
Conversation
Music
Pairing: 8.1
Pairing: 6.2
SPH10H
Intercom
Conversation Pairing: 8.1
SPH10H
English
•Feature phone for mobile phone call
•iPod Touch for stereo music streaming
•Two other SPH10Hs for three-way conference
intercom
Mobile Pairing: 7.2
Call
Intercom
Conversation
iPod
Touch
SPH10H
Pairing: 8.1
Music
SPH10H
GPS
Voice
Pairing: 6.2
iPod
Touch
Pairing: 6.3.1
TomTom® Rider 2
31
SPH10H
Case 6
•iPhone for mobile phone call and stereo music streaming
•Sena SR10 for two-way radio, GPS voice instruction,
and radar detector alarm
•SPH10H for two-way intercom
iPhone
Two-way radio
Mobile Call
Pairing: 6.1
Music
Wired
Connection
Tow-way radio
GPS Voice
Alarm
SPH10H
Pairing: 6.4
Intercom
Pairing: 8.1
Conversation
Wired
Connection
Sena SR10
Wired
Connection
Radar Detector
SPH10H
32
GPS with headphone
jack/audio line-out
BATTERY INFORMATION
The SPH10H has an internal, non-removable,
rechargeable battery. Do not attempt to remove
the battery from the device as you may damage
the device. The battery can be charged and
discharged hundreds of times, but it will eventually
wear out. Recharge the battery only with Sena
approved chargers designated for this device. Use
of an unapproved charger may present a risk of fire,
explosion, leakage, or other hazard.
Always try to keep the battery between 15℃ and 25℃
(59℉ and 77℉). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a
hot or cold battery may not work temporarily. Battery
performance is particularly limited in temperatures
well below freezing.
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Never use any charger that is damaged. Operating
times are estimates only and depend on the devices
used together, features used, battery age and
condition, temperatures to which battery is exposed,
and many other factors.
SPH10H
The SHM10 should be treated with care and the
following suggestions will help you protect your
warranty coverage.
1. Do not use or store the device in dusty, dirty areas.
Its moving parts and electronic components can
be damaged.
2. Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and wrap or melt
certain plastics.
3. Do not store the device in cold areas. When the
device returns to its normal temperature, moisture
can form inside the device and damage electronic
circuit boards.
4. Do not attempt to open the SPH10H
5. Do not drop or knock the device. Rough handling
can break internal circuit boards and fine
mechanics.
6. Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
7. Do not paint the device. Paint can clog the moving
parts and prevent proper operation.
These suggestions apply equally to the headset
main unit, speaker-microphone clamp unit, or power
charger.
33
English
MAINTENANCE AND CARE
SPH10H
DISPOSAL
CERTIFICATION AND SAFETY APPROVALS
The crossed-out wheel bin symbol on
the product, literature, or packaging
reminds you that all electrical and
electronic products, batteries, and
accumulators must be taken to separate
collection at the end of their working life.
This requirement applies to the European Union and
other locations where separate collection systems are
available. To prevent possible harm to the environment
or human health from uncontrolled waste disposal,
please do not dispose of these products as unsorted
municipal waste, but hand it in at an official collection
point for recycling.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
•T
his device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
34
SPH10H
CE Declaration of Conformity
FCC RF Exposure Statement
Please note that this product uses radio frequency
bands not harmonized within EU. Within the EU this
product is intended to be used in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, The Netherlands, Portugal, Spain,
Sweden, United Kingdom and within EFTA in Iceland,
Norway and Switzerland.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions
for satisfying RF exposure compliance. The
antenna used for this transmitter must not transmit
simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter
product procedures.
FCC Caution
Any changes or modifications to the equipment not
expressly approved by the party responsible for
compliance could void user’s authority to operate the
equipment.
This product is CE marked according to the provisions
of the R&TTE Directive (99/5/EC). Hereby, Sena
declares that this product is in compliance with the
essential requirements and other relevant provisions
of Directive 1999/5/EC. For further information please
consult http://www.senabluetooth.com.
Industry Canada Statement
This device complies with Industry Canada licenseexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
35
English
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
•C
onnect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•C
onsult the dealer or an experienced radio/TV
technician for help.
SPH10H
Bluetooth License
The Bluetooth® word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by
Sena is under license. Other trademarks and trade
names are those of their respective owners.
The SPH10H is compliant with and adopts the
Bluetooth® Specification 3.0 and has successfully
passed all interoperability tests that are specified in
the Bluetooth® specification. However, interoperability
between the device and other Bluetooth®-enabled
products is not guaranteed.
36
WAIVER AND GENERAL RELEASE
By using the SPH10H you waive all substantial
legal rights including the right to sue. Please read
the following carefully before using the device. If
you do not accept all terms of this agreement, you
should immediately return the product for a full
refund. By using the headset you agree to be bound
to this agreement and forfeit the right to sue. Using
a communication device while riding a motorcycle,
scooter, moped, ATV, quad-bike or any other vehicle
or equipment, whether on land, water or air (jointly
referred to as “Vehicle”) requires your complete
and undivided attention. Sena Technologies, Inc.,
including its Officers, Directors, Affiliates, Parent
Company, Representatives, Agents, Contractors,
Sponsors, Employees, Suppliers and Resellers
(jointly referred to as the “Company” or “Sena”)
strongly advise you to take all necessary precautions
and remain alert to the traffic, weather and road
conditions if you choose to use the SPH10H headset,
including all derivative models irrespective of its
commercial name or branding (the “Device”), and
stop your Vehicle on the roadside prior to initiating
or receiving calls. Any publications, advertisements,
announcements or similar notes that refer to using
SPH10H
By way of purchasing this Device and not returning
it for a full refund (see below), you are irrevocably
releasing, indemnifying from any liability, loss, claim
and expense (including attorney’s fees) and holding
Sena harmless for any bodily injuries, harm or death
as well as losses or damages in goods, to any Vehicles
including your own, or to any property or asset that
belong to you or to third parties, any of which may
result from using the Device under any circumstances
or conditions and irrespective of jurisdiction. Sena
will not be responsible for any physical damages,
irrespective of reasons, conditions or circumstances,
including malfunctioning of the Device, and all risks
associated with operating it rest solely and entirely
with the user of this Device, irrespective of whether
the Device is used by the original purchaser or any
third party.
Sena hereby notifies you that using this Device may
also be in contravention to local, federal, state or
national laws or regulations, and that any use of the
Device is entirely at your sole risk and responsibility.
1. You, your heirs, legal representatives, successors
or assigns, hereby voluntarily and forever release,
discharge, indemnify and hold harmless Sena from
any and all litigation, claims, debts, demands,
actions and liability which may arise, directly or
indirectly, from using the Device for any distress,
pain, suffering, discomfort, loss, injury, death,
damages to or in respect to any person or property
however caused, WHETHER ARISING FROM THE
NEGLIGENCE OR OTHERWISE, and which may
hereafter accrue to you on some future date as a
result of said use, to the fullest extent permitted
by law.
2. You fully understand and assume the risks in using
the Device, including risk of negligent acts or
omissions by others.
3. You confirm that you are physically capable to
use the Device and that you have no medical
conditions or needs that may infringe upon your
abilities to do so in a safe manner. You confirm that
you are at least eighteen (18) years of age and that
you have been advised of the risks associated with
the use of the Device. You further confirm that you
will not consume any alcohol that may affect your
alertness or any mind-altering substance, and
will not carry, use or consume these substances
37
English
the Device while riding a Vehicle are solely intended
to address its technical capabilities and should not
be misconstrued as if encouraging users to operate
the Device while actively involved in traffic.
SPH10H
before or during the use of the Device.
4. You fully acknowledge our warnings and
understand that: (a) risks and dangers exist in
using the Device while in traffic, including but not
limited to injury or illness, strains, fractures, partial
and/or total paralysis, death or other ailments that
could cause serious disability; (b) these risks
and dangers may be caused by the negligence
of the manufacturers or its agents or any third
party involved in designing or manufacturing the
Device; (c) these risks and dangers may arise from
foreseeable or unforeseeable causes. You hereby
assume all risks and dangers and all responsibility
for any losses and/or damages, whether caused in
whole or in part by the negligence or other conduct
of others, including the Company.
5. You confirm that you have read this release of
liability and fully understand its terms and that you
have given up substantial rights by not returning
the Device for a full refund (see refund option
below).
Two-Year Limited Warranty
Sena Technologies, Inc. (“Sena”) warrants that this
product (“Product”) shall conform to and perform in
accordance with published technical specifications
and the accompanying written materials, and shall
be free of defects in materials and workmanship, for
a period of two (2) year from the date of purchase
by the first consumer purchaser of the Product. The
limited warranty extends only to the original consumer
purchaser of the Product and is not assignable or
transferable to any subsequent purchaser/end-user.
This warranty is limited to the repair and/or
replacement, at Sena’s discretion, of defective or
non-conforming Product, and Sena shall not be
responsible for the failure of the Product to perform
specified functions, or any other non- conformance
caused by or attributable to: (a) any misapplication
or misuse of the Product; (b) failure of Customer to
adhere to any of Sena’s specifications or instructions;
(c) neglect of, abuse of, or accident to, the Product;
or (d) any associated or complementary equipment
or software not furnished by Sena.
Limited warranty service may be obtained by
delivering the Product to Sena or to the international
distributor it was purchased through and providing
38
SPH10H
SENA OR ITS DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT
WILL SENA OR ITS DEALERS TOTAL LIABILITY
EXCEED THE PRICE PAID FOR THE PRODUCT.
Limitation of Liability
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO
THE ABOVE CONDITIONS, YOU MAY RETURN THIS
DEVICE TO SENA FOR A FULL REFUND, PROVIDED
THAT YOU DO SO NO LATER THAN 14 BUSINESS
DAYS FOLLOWING THE PURCHASE OF THE
DEVICE AND SUBJECT TO THE WRAPPING BEING
INTACT. WHEN DOING SO, PLEASE REFER TO THIS
SECTION. BY NOT RETURNING THE DEVICE FOR
REFUND WITHIN THE PERIOD PROVIDED, YOU ARE
EXPLICITLY IN AGREEMENT WITH THE ABOVE AND
RENOUNCE ALL RIGHTS TO FUTURE CLAIMS AND
DEMANDS AGAINST SENA AS DEFINED ABOVE.
EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA
MAKES NO WARRANTY OF ANY KIND, EXPRESSED
OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT,
PARTS OR SERVICES PROVIDED PURSUANT TO THIS
AGREEMENT, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. NEITHER
SENA NOR ITS DEALER SHALL BE LIABLE FOR ANY
OTHER DAMAGES, INCLUDING BUT NOT LIMITED
TO DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER IN AN
ACTION IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE AND STRICT LIABILITY), SUCH AS,
BUT NOT LIMITED TO, LOSS OF ANTICIPATED
PROFITS OR BENEFITS RESULTING FROM, OR
ARISING OUT OF, OR IN CONNECTION WITH THE
USE OF FURNISHING OF EQUIPMENT, PARTS OR
SERVICES HEREUNDER OR THE PERFORMANCE,
USE OR INABILITY TO USE THE SAME, EVEN IF
Return for Full Refund
39
English
proof of purchase or receipt date. Customer agrees
to insure the Product or assume the risk of loss or
damage in transit, to prepay shipping charges to
Sena, and to use the original shipping container or
equivalent.
SPH10H
WARNING
Sena informs that using this device in public traffic
may not be authorized by the law. Please check your
local law and use this device only out of public traffic
such as private properties or closed circuits. If the
simultaneous use of both ear speakers while riding a
motorcycle is prohibited by your local law, please use
only a single ear speaker while riding. Sena denies
any liability should you choose not to respect this
warning.
Using the headset with loud volume may be harmful
to your eardrums and cause hearing loss. Please
maintain proper volume level to protect your ears.
40
1.0.0
www.senabluetooth.com
User's Guide for Firmware v4.1