Tisira TOC909 User manual

Add to my manuals
20 Pages

advertisement

Tisira TOC909 User manual | Manualzz

User manUal

600 & 900 // eleCTrIC OVen

TOT604 | TOC608 | TOC909

IMPORTANT //

Please ensure that you read through this user manual prior to installation and use. This manual contains important information to ensure optimal performance and keep you safe. Please retain your proof of purchase, as this will be required in the event that you require warranty service. Remember to retain this manual for future reference.

tisira |

www.tisira.com

www.tisira.com

pg

1

HellO

CONGRATULATIONS ON THE SELECTION OF THIS TISIRA APPLIANCE. TISIRA

APPLIANCES HAVE BEEN SPECIFICALLY DESIGNED FOR AUSTRALIAN AND

NEW ZEALAND KITCHENS.

Please read through this user manual carefully as it contains information that will ensure that your appliance is installed correctly, important operating & care instructions and also some advice of what you need to do if this appliance is not performing as intended.

pg

2

www.tisira.com

| tisira

COnTenTs

HELLO 2

CONTENTS 3

WARNING & SAFETY INFORMATION

PRODUCT OVERVIEW

4

5

ELECTRICAL CONNECTION 6

INSTALLATION 7-8

OPERATING INSTRUCTIONS

MANUAL TIMERS

9-11

12

6 BUTTON DIGITAL TIMER

3 BUTTON DIGITAL TIMER

MAINTAINING YOUR OVEN

PRODUCT SPECIFICATIONS

WARRANTY TERMS & CONDITIONS

CONTACT DETAILS

12-14

15-16

17-18

18

19

20

tisira |

www.tisira.com

pg

3

pg

4

WarnInG

& saFeTY

InFOrmaTIOn

This appliance is designed for indoor domestic use only. The manufacturer will not be held liable for any damages that might arise out of incorrect installation or improper, incorrect or unreasonable use of the appliance.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

The electrical system of the appliance may be only used safely when it is correctly connected to an efficient earthing system in compliance with the safety standards currently in effect.

The electrical connection must be accessible after installation. The appliance must be electrically isolated before any maintenance is performed including changing the light globe.

Young children should be supervised to ensure that they do not play with the appliance.

There is a fire risk if cleaning is not carried out in accordance with the instructions. You must read the details concerning the method and frequency of cleaning.

If the supply cord of this equipment is damaged, it must only be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

This appliance must be installed correctly by a suitably qualified person, strictly in accordance with the manufacturer’s instructions.

Never line the bottom of the oven with aluminium foil or rest pans on the base of the oven, as this will damage your oven enamel coating and void warranty.

When the appliance is not in use it must be left in the ‘off’ position.

All cabinetry and surrounding materials that is used in the installation of this oven must be able to withstand a minimum 50ºC above the ambient room temperature whilst the oven is in use. Consult your kitchen manufacture to ensure the surfaces will not be affected by heat. Damage caused by the appliance that is not installed in accordance with the temperate limit will be the liability of the owner.

WARNING //

The oven will become hot during and after use. Do not touch any component during this time as they may be hot and cause burns. Do not touch the heating elements inside the oven to avoid burns. Children should be kept away. Use heat resistant cooking gloves where ever possible when moving food and accessories in and out of your oven.

www.tisira.com

| tisira

PrODUCT OVerVIeW

1 2

TOC608 // 600 eleCTrIC OVen 8 FUnCTIOn

1. 6 Button digital timer 2. Function selector 3. Thermostat

3

1 2

TOT604 // 600 eleCTrIC OVen 4 FUnCTIOn

1. Manual timer 2. Function selector 3. Thermostat

3

1

2

TOC909 // 900 eleCTrIC OVen 9 FUnCTIOn

1. Thermostat

2. 3 Button digital timer

3. Function selector

3

tisira |

www.tisira.com

pg

5

pg

6

eleCTrICal

COnneCTIOn

NOTICE //

This appliance must be connected only be a licensed electrician and installed in accordance with the manufacturers instructions.

Check that the power rating of the mains supply and of the sockets are suitable for the maximum power of the appliance as indicated on the specification plate. This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 15A plug.

If the appliance is fitted with a supply lead and is not fitted with a plug, then permanently connect it to the fixed wiring as follow:

The “yellow/green” earth wire, which must be connected to terminal, has to be about

10mm longer than the other wires; the “blue” neutral wire has to be connected to the terminal marked with letter N.

“Black, brown, red” live wires have to be connected to terminal L. Mains connection can also be made by fitting a double pole switch with a minimum gap between the contacts of 3mm, proportionate to the load and complying with the regulations in force.

The yellow/green earth wire should not be controlled by the switch.

The plug or a double pole switch used for mains supply connection should be easy to get at, once the appliance is in position.

IMPORTANT //

Position the mains supply cable so that it is never subjected to a temperature which is more than 50°C above ambient temperature. The electrical safety of the appliance can only be guaranteed when it has been correctly connected to an efficient earthed power supply, as laid down in the regulations for electrical safety. The manufacturer cannot be held responsible for any damage to persons or objects due to lack of an earth connection. If the supply cord is damaged, it must be replaced by the service agent or similarly qualified person in order to avoid a hazard.

www.tisira.com

| tisira

70

InsTallaTIOn

Min 550

560

560

560

70

545

23

Min 550

70

545

Min 30

595

540

20

595

TOT604 & TOC608 // eleCTrIC OVen

40

540

20

595

860

850

70 min 550

78

525

447

22

TOC909 // eleCTrIC OVen

895

* ALL DIMENSIONS IN MM

pg

7 tisira |

www.tisira.com

pg

8

InsTallaTIOn

IMPORTANT //

The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture is made of veneered wood, the adhesives should be able to withstand a temperature of 120°C. To comply with safety regulations, once the appliance has been fitted it should not be possible to make contact with the electrical parts. All parts, which offer protection, should be fixed in such a way that they cannot be removed without the use of a tool.

To ensure that the oven works as intended it is important to install the unit as shown in the diagram and allow enough airflow to enable to ovens cooling system to perform.

Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws into the 4 holes that can be seen in the frame of the oven when the door is open.

A

A

A A

A

A

70

IMPORTANT //

The first time you switch the oven on, some smoke may appear. These are the coatings used to protect your appliance during transport and storage. There is nothing unusual about this. If it happens, simply wait until the smoke disappears before putting any food in the oven. Never roast or bake on the base of the oven.

70

70 www.tisira.com

| tisira

OPeraTInG

InsTrUCTIOns

Turning the function selector to the required function and setting the desired temperature (in a clockwise direction) will turn on your oven ready for use.

NOTICE //

Your oven is equipped with a thermostatically controlled cooling fan that will switch on when required to cool the oven door and cabinetry. This fan may continue to run even after the oven is switched off, but will automatically turn off when the cavity is sufficiently cool.

Some air may discharge from the front of the oven this is a normal function.

GENERAL FUNCTIONS GUIDE

Only the oven light comes on. It remains on in all the cooking functions.

LIGHT

DEFROST

The air at ambient temperature is distributed inside the oven for defrosting food more quickly.

NATURAL

CONVECTION

Both the lower and upper elements operate together. This traditional cooking function is good for roasting, baking and crisping food. Good results are achieved by adjusting the shelf height to suit your cooking requirements. Temperature range: 50°C – MAX.

FAN

FORCED

Both the oven fan and the circular heating element operate together.

The fan forced function distributes the heat evenly inside the oven.

This is ideal for variety of cooking styles; roasting, baking, pastries, re-heating food, casseroles and multi-level cooking. Temperature range: 50°C – MAX.

MED.

GRILL

MAX.

GRILL

The grill element operates to give top down heat only. This is idea for grilling small quantities of food. The door should be closed for short grilling times (less than 10 minutes) Temperature range:

50°C – 225°C

The full grill element operates to give top down heat only. This is idea for traditional grilling of food. Temperature range: 50°C – 225°C pg

9 tisira |

www.tisira.com

pg

10

OPeraTInG

InsTrUCTIOns

FAN

GRILL

The full grill element and the fan operate together, with the fan circulating the heat generated by the grill element. This function is ideal for cooking tender cuts of meat and poultry. Temperature range: 50°C – 200°C

FAN

BAKE

The bottom element and the fan operate together. This function is idea for cooking food that require heat from the base with the additional benefit of the heat being circulated by the fan. Temperature range:

50°C – MAX.

BAKE

The bottom element operates to generate heat from the base of the oven. This function is used for cooking pizza and other food that requires only heat from the bottom. Temperature range: 50°C – MAX.

ROTISSERIE OPTION

– available only on select 900mm models*

An optional rotisserie kit can be purchased from your nearest service centre that features a removable multiple skewer rotisserie. The rotisserie is positioned parallel to the back of the oven (Fig. A).

USING THE ROTISSERIE

1. Slide the meat to be cooked into the spit lengthwise, keeping it in place with the adjustable forks. With kebabs, slide the meat to be cooked into the skewers provided and place them on the appropriate holders.

2. Slide the holders, “A” and “B” in Fig. A, into the appropriate holes in the dripping-pan, rest the groove end of the rod on the guide “D” and slide the rack onto the bottom guide

(Fig.B).

3. Slide the rod into the hole for the motor shaft and place the grooved end of the rod on the guide “C”.

4. Start the motor by turning the knob to the grill setting.

www.tisira.com

| tisira

OPeraTInG

InsTrUCTIOns

FIG. a

* Available on the TOC909 & TOCR909

FIG. B

tisira |

www.tisira.com

pg

11

manUal TImers

MINUTE TIMER

Turn the knob clockwise to set the desired cooking time. The minute counter can be adjusted from 1 to 60 minutes or 1 to 120 minutes. A sound signal will inform you that the chosen time is up.

pg

12

120

110

100

90

80

70

10

20

30

60

50

40

6 BUTTOn

DIGITal TImer

The operation of this timer is done using 6 buttons. The functions of the buttons are:

120

110

100

90

80

70

10

20

30

60

50

40

MINUTE

COUNTER

COOKING

TIME

END

TIME

MANUAL

SUBTRACT

TIME

ADD

TIME www.tisira.com

| tisira

With this arrangement it is possible to select the following four functions:

Minute counter Operation period

Operation stop Time-of-day

DISPLAY

Cooking time and manual function = saucepan symbol

Automatic function = AUTO

Minutes counter = bell symbol

SETTING

To set, press and release the desired function, and within 5 seconds set the time with + and

– buttons. To increase the speed of the time selection, hold the + or – button in for a longer period.

SETTING THE TIME

Press any two buttons (cooking time, end time, minutes counter) at the same time, and +or

–button to set the desired time; this deletes any previously set program. The contacts are switched off and the AUTO symbol flashes.

MANUAL USE

By pressing the manual button the relay contacts switch on, the AUTO symbol switches off and saucepan symbol lights up. Manual operation can only be enabled after the automatic program is over or it has been cancelled.

AUTOMATIC USE

Press the cooking time or end time button to automatically form the manual to the automatic function.

SEMI-AUTOMATIC USE WITH COOKING TIME SETTING

Press the cooking time button and set the desired time with + or -, the AUTO and cooking time symbols light up continuously. The relay switches on immediately. When the cooking end time corresponds to the time of day, the relay and the cooking time symbol switch off; the sound signal rings and the AUTO symbol flashes.

SEMI-AUTOMATIC USE WITH END TIME SETTING

Press the end time button. The time of day appears on the display. Set the cooking end time with + button. The AUTO and cooking time symbols light up continuously. The relay contacts switch on. When the cooking end time corresponds to the time of day, the relay and the cooking time symbol switch off. When the cooking time is up. The AUTO symbol flashes, the sound signal rings and both the relay and the cooking time button switch off.

tisira |

www.tisira.com

pg

13

pg

14

AUTOMATIC USE WITH COOKING TIME AND END TIME SETTING

Press the cooking time button and select the length of the cooking time with + or – button. The

AUTO and cooking time symbols light up continuously. The relay switches on. By pressing the cooking end time button the next cooking end time appears on the display. Set the cooking end time with + button. The relay and the cooking time symbol switch off and the symbol lights up again when the time of day corresponds to the cooking start time. When the cooking time is up, the AUTO symbol flashes, the sound signal rings, the cooking time symbol and the relay switch off

MINUTES COUNTER

Press the minutes counter button and set the cooking time with + or – button.

The bell symbol lights up when the minutes counter is operating, when the set time is up, the sound rings and the bell symbol switches off.

SOUND SIGNAL

The sound signal starts at the end of a program or of the minutes counter function and it lasts for 15 minutes. To stop it, push any one of the functions buttons.

START PROGRAM AND CHECK

The program starts 4 seconds after it has been set. The program can be checked at any time by pressing the corresponding button.

SETTING ERROR

A setting error is made if the time of day on the clock falls within the cooking start and end times. To correct the setting error, change the cooking time or cooking end time the relays switch off when a setting error is made.

CANCELLING A SETTING

To cancel a setting, press the cooking time button and then press the – button until 00:00 appears on the display. A set program will automatically cancel on completion.

www.tisira.com

| tisira

3 BUTTOn

DIGITal TImer

The operation of this timer is done using 3 buttons. The functions of the buttons are:

MINUTE

COUNTER

COOKING

TIME

TIME

END

TIME

MODE

SUBTRACT

TIME

ADD

TIME

With this arrangement it is possible to select the following four functions:

Minute counter

Operation stop

Operation period

Time-of-day

These modes can be selected by repeatedly pressing the mode button. The desired time for minute counter, operation period, operation stop or time-of-day can be set with the “+” and

“-“ buttons.

TIME OF DAY

When connected to mains supply the display shows 12.00 o’clock and the “Time” LED flashes.

As long as it is flashing, it is possible to adjust the time via the plus and minus buttons. Once the time is adjusted, it is stored approx. 5 seconds after the last operation, the “Time” LED goes dark again. It is possible to adjust the time-of-day by pressing the mode button until

“Time” LED flashes, then the time-of-day can be adjusted.

MINUTE COUNTER (INTERVAL TIME)

In order to set the interval time, the “Mode” button has to be pressed repeatedly until “Minute

Counter” LED is flashing. Then the interval time can be set between 0.01 and 2.30 h by using the plus and minus buttons. After setting the interval time, it remains displayed and the “Minute

Counter” LED is now illuminated steadily. After the interval time has run down, the alarm signal pg

15 tisira |

www.tisira.com

pg

16

sounds (2 beeps every 2 seconds) and the “Minute Counter” LED is flashing again. Pressing any of the buttons stops the signal and the flashing, the LED goes dark and the display reverts to the time-of-day. If the alarm is not stopped manually, it terminates automatically after 2 minutes. The minute counter can be applied at any time while other functions are operative.

OPERATION PERIOD

In order to set an operation period, the mode button has to be pressed repeatedly until the

“Cooking Time” LED is flashing. Then the desired operation period (time frame between 0.01h and 10.00h) can be set using the plus and minus buttons. Once adjusted, it will be stored after approx.. 5 seconds, the “Cooking Time” LED remains illuminated steadily, and the set time starts running down. The display reverts to the time-of-day. As soon as the operation period has ended, the relay opens and the alarm signal sounds (4 beeps every 2 seconds) and the

“Cooking Time” LED is flashing again. Pressing any of the buttons stops the signal and the flashing, the LED goes dark and the relay closes again. If the alarm is not stopped manually, it terminates automatically after 2 minutes.

OPERATION STOP

In order to set an operation stop, the mode button has to be pressed repeatedly until the

“End Time” LED is flashing. Then the desired operation stop, which is limited to a point being maximally 23.59 h in the future, can be set using the plus and minus buttons. Once adjusted it will be stored after approx. 5 seconds, and the “End Time” LED remains illuminated steadily.

The display reverts to the time-of-day. As soon as the operation stop has been reached, the relay opens and the alarm signal sounds (4 beeps for 2 minutes) and the “End Time” LED is flashing. Pressing any of the buttons stops the signal and the flashing, the LED goes dark and the relay closes again.

It is possible to combine the duration and end time in order to program a delayed mode. To do this, both the operation period and operation stop time have to be set (above). “Cooking Time”

LED and “End Time” LED are illuminated and the baking process will start at a point in time

“operation stop minus operation period”. If a baking process ought to be finished at 12.00 and shall last 1.30 h, both times have to be set in the respective modes, and the timer will switch on the oven at 10.30. The timer is capable to avoid conflicts during the programming. (Eg with an operation period of 60 minutes resp. 1.00 hr set, and the time-of-day being 11.34 o’clock, then the operation stop can be earliest at 12.34 o’clock.)

NOTICE //

A running program can be checked and corrected at any time. In order to avoid conflicts, it is not possible to set the time of day when an automatic program is active.

www.tisira.com

| tisira

maInTaInInG

YOUr OVen

GENERAL MAINTENANCE

Ensure that the power to the unit is switched off prior to cleaning the unit. Surface should only be cleaned with warm soapy water and a soft non abrasive cloth. In coastal environments and humid areas more frequent cleaning is required to maintain the finish.

To extend the life of your oven, it must be cleaned frequently, keeping in mind that:

Do not use steam equipment to clean the appliance.

To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid or sprinkle water to clean the appliance!

Don’t clean the appliance when it is hot! The inside and external surface of the oven should preferably be cleaned by damp cloth when it is cooled down. Wash all accessories in hot soapy water, wipe dry with a paper or cloth towel.

If you use your oven for an extended period of time, condensation may form. Dry it using a soft cloth.

There is a rubber seal surrounding the oven opening, which guarantees its perfect functioning.

Check the condition of this seal on a regular basis. If necessary, clean it and avoid using abrasive products or objects to do so. Should it become damaged, please contact your nearest service centre. We recommend you avoid using the oven until it has been repaired.

Never line the oven bottom with aluminum foil, as the consequent accumulation of heat could compromise the cooking and even damage the enamel.

Clean the glass door using damp cloth and dry it with a soft cloth.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

DOOR REMOVAL

Your oven is fitted with a removable door. To remove the door open the door fully, engage the doorstop [B] on the left and right hinge.

[A] Carefully start to close the door, the door will start to release from the hinge supports

A

B installing the door ensure the hinges are slid into their slots (C) fully engages in the base of the hinge support.

C

B pg

17 tisira |

www.tisira.com

pg

18

LAMP REPLACEMENT

WARNING //

Ensure that the appliance is completely cool and that the power to the unit has been switched.

Your oven is fitted with E14 15W oven lamps (300°C). Replacement lamps can be purchased from your nearest service centre. To remove the lamp, twist the cover in an anti-clockwise direction. Unscrew the lamp and replace it with a new lamp. Replace the cover.

ADJUSTING THE SHELF / TRAY POSITION

When adjusting or positioning your shelf, please ensure the following.

1

2

3

Ensure that the shelf / tray is located between the two wire side-rack guides. (see point 1)

The shelf stops should be facing downwards and towards the rear. (see point 2)

The guard rail should always be located at the rear of the oven (see point 3)

PrODUCT sPeCIFICaTIOns

MODEL

TOT604

TOC608

TOC909

TOCR909

VOLTAGE

220 - 240V~ 50Hz

220 - 240V~ 50Hz

220 - 240V~ 50Hz

220 - 240V~ 50Hz

WATTAGE

2700 - 3220W

2700 - 3220W

2800 - 3400W

2800 - 3400W www.tisira.com

| tisira

WarranTY Terms

& COnDITIOns

tisira |

www.tisira.com

pg

19

COnTaCT

DeTaIls

pg

20

www.tisira.com

| tisira

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What types of food can the TOT604 electric oven cook?
The TOT604 electric oven can cook a wide variety of foods, including pizza, pastries, and grilled foods.
What types of cooking functions does the TOT604 electric oven have?
The TOT604 electric oven has a range of cooking functions, including defrost, natural convection, fan forced, and grill.
What are the temperature ranges for the different cooking functions of the TOT604 electric oven?
Temperature ranges vary depending on the cooking function, with a minimum of 50°C and a maximum of 225°C or MAX.
Does the TOT604 electric oven come with a rotisserie kit?
The TOT604 electric oven does not come with a rotisserie kit, but one can be purchased separately from a service center.
What safety features does the TOT604 electric oven have?
The TOT604 electric oven has a thermostatically controlled cooling fan and requires a proper earth connection for safe operation.

Related manuals

Download PDF

advertisement