SmartScript User Manual

Add to my manuals
130 Pages

advertisement

SmartScript User Manual | Manualzz

Lab-LINK

TM

for Windows

Part 3

Smart Script User Manual

Top Team Technology Inc.

SmartScript 使用手冊 目錄

Table of Content

Chapter1 Introduction

Features _______________________________________________________ 1-1

Mode _________________________________________________________ 1-2

Command Line _________________________________________________ 1-2

Chapter 2 Editor

User Interface __________________________________________________ 2-1

File Menu _____________________________________________________ 2-2

Edit Menu _____________________________________________________ 2-2

View Menu ____________________________________________________ 2-4

Run Menu _____________________________________________________ 2-5

Chapter 3 Applications

Run a Script When Project Starts ___________________________________ 3-1

Activate a Script Using a SmartPanel Object __________________________ 3-5

Using Loop ____________________________________________________ 3-8

Tag Event ____________________________________________________ 3-11

Important Issue Regarding Tag Event _______________________________ 3-13

Run a Script when a Panel is Opened _______________________________ 3-16

Communication Application ______________________________________ 3-20

Chapter 4 Syntax

Overview ______________________________________________________ 4-1

Command Line _________________________________________________ 4-1

Line Label _____________________________________________________ 4-1

Character Set

__________________________________________________ 4-2

Constants ______________________________________________________ 4-3

Variables ______________________________________________________ 4-5

SmartScript 使用手冊 目錄

Type Conversion ________________________________________________ 4-8

Expressions and Operations ________________________________________ 4-8

Chapter 5 Statements and Functions

How to use this chapter _______________________________________________ 5-1

Keywords by Programming Task ____________________________________ 5-2

Statements and Functions __________________________________________ 5-3

ABS( ) ___________________________________________________________ 5-3

ACOS( ) __________________________________________________________ 5-3

ALARM( ) ________________________________________________________ 5-4

ALMGRP( ) _______________________________________________________ 5-5

ALMPRI( ) ________________________________________________________ 5-5

ALMTAG$( ) _____________________________________________________ 5-6

ASC( ) ___________________________________________________________ 5-7

ASIN( ) __________________________________________________________ 5-7

ATAN( ) __________________________________________________________ 5-8

BEEP ____________________________________________________________ 5-8

CD ______________________________________________________________ 5-9

CHOICE( ) ________________________________________________________ 5-9

CHR$( ) _________________________________________________________ 5-10

CLOSE _________________________________________________________ 5-10

COMMODE ______________________________________________________ 5-11

COMOPEN ______________________________________________________ 5-12

CONTINUE ______________________________________________________ 5-13

COPY __________________________________________________________ 5-13

COS( ) __________________________________________________________ 5-14

COSH( ) ________________________________________________________ 5-14

CRC16( ) ________________________________________________________ 5-15

SmartScript 使用手冊

CRC32( ) ________________________________________________________ 5-15

CREATE _________________________________________________________ 5-16

DAY( ) __________________________________________________________ 5-16

DATETIME$() ____________________________________________________ 5-17

DEL ____________________________________________________________ 5-17

DIM ____________________________________________________________ 5-18

DIR$( ) __________________________________________________________ 5-18

END ____________________________________________________________ 5-19

ERRID( ) ________________________________________________________ 5-19

ERRORTAG( ) ____________________________________________________ 5-20

EXEC ___________________________________________________________ 5-21

EXIT ____________________________________________________________ 5-22

EXP( ) __________________________________________________________ 5-22

FAC( ) __________________________________________________________ 5-23

FCHECK( ) _______________________________________________________ 5-23

FILE$( ) _________________________________________________________ 5-24

FLEN( ) _________________________________________________________ 5-24

FMBCD ( ) ________________________________________________________ 5-25

FMDBL ( ) ________________________________________________________ 5-25

FMFLT ( ) _________________________________________________________ 5-26

FOR … LOOP ____________________________________________________

5-27

Format( ) ________________________________________________________ 5-29

FPOS( ) _________________________________________________________ 5-33

FPRINT _________________________________________________________ 5-33

GOSUB _________________________________________________________ 5-34

GOTO __________________________________________________________ 5-35

HOUR( ) ________________________________________________________ 5-35

SmartScript 使用手冊 目錄

IDLE ___________________________________________________________ 5-36

IF … ELSEIF … ELSE … ENDIF _____________________________________

5-37

INT( ) ___________________________________________________________ 5-38

ISTR$( ) _________________________________________________________ 5-38

IVAL( ) __________________________________________________________ 5-39

LEFT$( ) ________________________________________________________ 5-39

LEN( ) __________________________________________________________ 5-40

LN( ) ___________________________________________________________ 5-40

LOG( ) __________________________________________________________ 5-41

LOWER$( ) ______________________________________________________ 5-41

LTRIM$( ) _______________________________________________________ 5-42

MAX( ) __________________________________________________________ 5-42

MD _____________________________________________________________ 5-43

MESSAGE ______________________________________________________ 5-43

MID$ ( ) _________________________________________________________ 5-44

MIN( ) __________________________________________________________ 5-44

MINUTE( ) _______________________________________________________ 5-45

MONTH( ) _______________________________________________________ 5-45

MOVE __________________________________________________________ 5-46

MSGBOARD _____________________________________________________ 5-47

NERR( ) _________________________________________________________ 5-48

NOW( ) _________________________________________________________ 5-48

NOW$( ) ________________________________________________________ 5-49

OPEN __________________________________________________________ 5-50

PASS ___________________________________________________________ 5-51

PLAY ___________________________________________________________ 5-52

RAND( ) _________________________________________________________ 5-53

SmartScript 使用手冊

RD _____________________________________________________________ 5-53

READ ___________________________________________________________ 5-54

RETURN ________________________________________________________ 5-55

RIGHT$( ) _______________________________________________________ 5-55

RSTERR ________________________________________________________ 5-56

RTRIM$( ) _______________________________________________________ 5-56

SECOND( ) ______________________________________________________ 5-56

SEEK ___________________________________________________________ 5-57

SETDIR _________________________________________________________ 5-58

SHORTCUT ______________________________________________________ 5-59

SHUTDOWN _____________________________________________________ 5-60

SIN( ) ___________________________________________________________ 5-61

SINH( ) __________________________________________________________ 5-61

SLEEP __________________________________________________________ 5-62

SQRT( ) _________________________________________________________ 5-62

STOP ___________________________________________________________ 5-62

STR$( ) _________________________________________________________ 5-63

STRING$( ) ______________________________________________________ 5-63

SUM08( ) ________________________________________________________ 5-63

SWITCH … CASE … DEFAULT … ENDSW ____________________________

5-64

SYSINFO$( ) _____________________________________________________ 5-65

TAG( ) __________________________________________________________ 5-66

TAN( ) __________________________________________________________ 5-67

TANH( ) _________________________________________________________ 5-67

TICK( ) __________________________________________________________ 5-68

TIMER( ) ________________________________________________________ 5-68

TOKEN _________________________________________________________ 5-69

SmartScript 使用手冊 目錄

TONE __________________________________________________________ 5-70

TRAPOFF _______________________________________________________ 5-70

TRAPON ________________________________________________________ 5-71

UPPER$( ) ______________________________________________________ 5-71

VAL( ) __________________________________________________________ 5-71

WEEKDAY( ) _____________________________________________________ 5-72

WHILE … LOOP __________________________________________________

5-72

WRITE __________________________________________________________ 5-73

XOR08( ) ________________________________________________________ 5-73

YEAR( ) _________________________________________________________ 5-74

Appendix A Environment Limits

Appendix B Keywords

Appendix C Operator Precedence

Appendix D Error Codes

Chapter 1 Introduction

SmartScript is the built-in script language of Lab-Link for Windows. It is simple yet powerful and is closely integrated with Lab-LINK to provide a quick solution when complex logics are involved.

With SmartScript, developers can write the control logic or math calculation they need without using a programming language and any other programming tools.

SmartScript provide the basic functions of a script language including data type, variable, loop, conditional branch, file access and IO communication. There are also abundant functions for various needs. A simple editor is also provided to help users edit and debug their script.

This manual will describe the features of SmartScript and the usage of the SmartScript editor.

Detail explanation of the syntax, statements and function are also included for developers’ reference.

Features

 Access to real time TAG data.

 Program flow control such as conditional branching, loop and subroutine.

 Tag event handling

 File access

 Capable of handling IO communication

 Rich math, string and time functions

1-1

SmartScript User Manual Chapter 1

Mode

SmartScript module can be executed in two modes: Edit and Run. When executed in Edit mode, the SmartScript editor will be activated to allow editing, compiling and debugging of script files. This mode is usually used in develop stage to write script logics. When executed in Run mode,

SmartScript module will load the specified script file and executed the statements in the script.

The execution file of SmartScript module is CONTROL.EXE, Its command line parameters will be discussed in the following section.

Command Line

The command line of CONTROL.EXE can contain the following parameters:

CONTROL.EXE [ScriptFile [/R]]

Parameter Description

None Activate SmartScript editor and open a new unnamed script file.

Mode

Edit

ScriptFile Activate SmartScript editor and load the specified script file.

Edit

ScriptFile /R Run SmartScript and load the specified script file for execution.

Run

A script file has the extension name of .CSL and is stored in standard text file format.

1-2

Chapter 2 Editor

SmartScript is the easy to use developing environment of SmartScript module. It provides basic editing, syntax checking and debugging feature to help developer write and test their script logics.

User Interface

When SmartScript is executed in Edit mode, the screen below will appear:

If a script file name is included in its command line parameter, the file name will be shown on the title of SmartScript editor window. Below the title bar is the menu of the editor which providing

File, Edit, View, Run, Help functions. These functions are described as follows.

2-1

SmartScript User Manual Chapter 2

File Menu

File menu includes theses functions:

New

Open a new script file.

Open

Open an existed script file.

Save

Save the currently editing file. If an untitled file is being edited, the Save As dialog will appear to request for a file name.

Save As

Save the currently editing file as a different name.

Print

Print the currently editing file. A dialog will appear to allow the selection of printer, range and copies.

Print Direct

Print the currently editing file directly without showing the Print dialog.

Print Preview

Show how the file will be printed on the screen.

Print Setup

Define the printing properties.

Exit

Close the editor.

Edit Menu

Edit menu provide these functions:

2-2

SmartScript User Manual Chapter 2

Undo

Undo the previous editing action.

Redo

Redo the previous undo editing action.

Cut

Cut the selected text.

Copy

Copy the selected text.

Paste

Paste the cut or copied text to the current location of the cursor.

Delete

Delete the selected text.

Select All

Select text for editing.

Find

Move the cursor to the target text. A Find dialog will appear. Enter the text to be found in the

Find what field and do either of the followings:

Find Next button

Move cursor to the next appearing of the target string and select the text.

Cancel

按鈕

2-3

SmartScript User Manual Chapter 2

Close the dialog.

Find Next

Find the next appearance of the target string specified in the previous Find action.

Replace

Replace the target text with the specified string. A Replace dialog will appear. enter target and replace string in the Find what and Replace with respectively. Use the buttons to do the operations below:

Find Next button

Move cursor the next appearance of the target text.

Replace button

Replace the target text with the replace text.

Replace All button

Replace all target text in the file with the replace text.

Cancel button

Close the dialog.

View Menu

View menu provide the following functions:

Tool Bar

─ To show or hide the tool bar.

Status Bar

─ To show or hide the status bar.

2-4

SmartScript User Manual Chapter 2

Run Menu

Run menu provides these functions:

Compile

─ Check the syntax of the script. Since SmartScript is an interpreter, the compiling only does syntax checking and will not generate any object or execution file. If there is any syntax error, it will be shown in the window below. See Appendix D for error codes.

Execute

─ Run the script. The execution will continue until the last statement is executed or the execution is interrupted by the user. If any error occurs during the execution, an error message will appear to show error code and message. Execution of script can be interrupted by Break or

Stop in the Run menu.

Step Into

─ Execute the script one statement at a time. Each the menu item is selected, a statement will be executed. After the execution of the statement, the script will stop to wait for user operation. User can either select Stop Into again to execute the next statement or select

Step Over or Go to execute the remaining statements. Function key F8 can be used as a hot key of Step Into. For statements in a subroutine, Step Into will also execute one statement at a time.

Step Over

─ Similar to Stop Into with the exception on the execution of statements in a subroutine. When Step Over is used to execute a subroutine call, it will finish all statements in the subroutine and return to the main program before stop for user operation.

Go

─ Continue running all the remaining statements in the script until the end is reached or any error occurs to interrupt its execution.

Break

─ Halt the execution of the script. Step Into, Step Over or Go can be used to continue the execution after Break.

Stop

─ Stop the execution of the script. All opened files will be closed automatically when the script is stopped.

2-5

Chapter 3 Applications

Although SmartScript can be run independently, it is usually integrated with a Lab-LINK project to provide extra functions in real applications. Examples may include complex math computation or control logic, file reading and writing or even IO communication. This chapter will illustrate some possible applications using simple examples.

Run a Script When Project Starts

The simplest and also the most common way of running a script is to run it when a Lab -LINK project starts. Add a Script module in the project and the script will be run when the project starts.

The script will be terminated when the project ends.

To add a Script into a project, right click on the Script node in the Project window of PAM and select Add Script from the popup menu. An Add SmartScript dialog will appear to allow the selection of Script File source. There are two selections available: Create a new script and

3-1

SmartScript User Manual Chapter 3

Reference to an existing script.

Create a new script : Create a new blank script file in the CSL subfolder of the project and run SmrtScript Editor to load the empty for user to edit

Reference to an existing script: The new script module will reference to an existed script file.

When a script is added and the project is regenerated, the script will be run when the projec t starts. The example script below will write a line of message recording the time the system starts into a text file. After the writing, the script will close the file and end.

3-2

SmartScript User Manual Chapter 3

Code

Line Code

4

5

6

1

2

3

9

10

7

8

FileName$="LABLINK.LOG"

OPEN 1, FileName$, "W"

IF (!FCHECK(1))

CREATE 1, FileName$

ENDIF

// Write data to the data file

SEEK 1, 0, "E"

FPRINT 1, YEAR(),"/",MONTH(),"/",DAY()," "

FPRINT 1, HOUR(),":", MINUTE(),":",SECOND()," "

FPRINT 1, "LABLINK STARTED\r\n"

11 CLOSE 1

12 END

Note: The Line numbers are jest for reference and are not part of the script code

TAG and Variables

Name Type Description

FileName$ String Variable Store the name of the file name.

3-3

SmartScript User Manual Chapter 3

Script Description

Line 1: Specify the name of the recording file. The working directory of SmartScript is the system folder of Lab-LINK (Installation default is C:\LABLINK\SYSTEM4).

Complete path should be included in the file name designation if the file does not resides in this system folder. For example, FileName$="..\\CSL\LABLINK.LOG" specify the file path at ..\CSL\LABLINK.LOG. (This is equivalent to the absolute path of

C:\LABLINK4\CSL\LABLINK.LOG) Note that

“\\” is used to replace the “\” in path definition since

“\” is a keyword in SmartScript.

Line 2: Open the file in Write mode and assign the file number as 1. The file number will be used in later file access statement until the file is closed.

Line 3-5: Check if the file is opened successfully. If not , create the specified file using

CREATE statement.

Line 6: Any texts after

“//” will be treated as remark and will not be interpreted and executed..

Line 7: Move the read-write pointer to the end of the file. The new text will be appended to the end of the file.

Line 8-10: Write system date/time and the message

“LABLINK STARTED” System date and time are acquired using the time related functions YEAR()

、MONTH()、DAY()、

HOUR()

、MINUTE() and SECOND(). “\r” and “\n” represent the control characters

“Carriage Return” and “Line Feed” respectively and used to change line. The three statement can be combine into one by joining the text strings using

“+” operators.

Line 11: Close the file. After the file is closed, the file number 1 is also released for use of other file access statements.

Line 12: End of the script. This SmartScript module will also end its execution.

3-4

SmartScript User Manual Chapter 3

Activate a Script Using a SmartPanel Object

SmartScript can be integrated with SmartPanel by running it with a Executer object. For example, a script may be run when user presses a button. The following example shows a script which is run when with a LOGIN button to record newly log-in user

’s identity into a file.

SmartPanel Object Setting

Object

Button

Properties

Caption: LOGIN

Style: Push Button, Password

Note: Pressing this button will set the value of the tag LOGIN to 1.

Set Push Button to reset the tag to 0 when the button is release.

Set Password to mandate password authentication when a user operate this button.

TAG

LOGIN

Executer File: CONTROL.EXE

Parameter: ..\PROJECT\PROJ1\CSL\LOGIN.CSL /R

Note: Run the specified SmartScript when the value of LOGIN is 1.

LOGIN

Note: Script files are stored under the CSL subfolder of the project. The project name is PROj1 and the script file name is

“Login.csl “in this example.

3-5

SmartScript User Manual Chapter 3

Code

Line Code

1 FileName$="LABLINK.LOG"

2 OPEN 1, FileName$, "W"

3 IF (!FCHECK(1))

4 CREATE 1, FileName$

5 ENDIF

6 // Write data to the data file

7 SEEK 1, 0, "E"

8 FPRINT 1, YEAR(),"/",MONTH(),"/",DAY()," "

9 FPRINT 1, HOUR(),":", MINUTE(),":",SECOND()," "

10

FPRINT 1, {$USER.$}, "

登入\r\n"

11

CLOSE 1

12

END

Note: The Line numbers are jest for reference and are not part of the script code

TAG and Variables

Name Type Description

LOGIN

$USER

TAG The tag used to trigger the execution of the script.

System TAG The system Tag whose message field indicate the name of the current logged-in user.

FileName$ String Variable The variable used to store the name of the file for log-in logging.

3-6

SmartScript User Manual Chapter 3

Script Description

Line 1: Specify the file name of the Log-in log file.

Line 2: Open the file in Write mode and assign the file number as 1. The file number will be used in later file access statement until the file is closed.

Line 3-5: Check if the file is opened successfully. If not , create the specified file using

CREATE statement.

Line 6: Any texts after

“//” will be treated as remark and will not be interpreted and executed..

Line 7: Move the read-write pointer to the end of the file. The new text will be appended to the end of the file.

Line 8-10: Write system date/time and the user log-in message into the file. {$USER.$} is the message field of the system tag $USER and its content is the name of the current log-in user.

Line 11: Close the file. After the file is closed, the file number 1 is also released for use of other file access statements.

Line 12: End of the script. This SmartScript module will also end its execution.

3-7

SmartScript User Manual Chapter 3

Using Loop

In the two previous examples, SmartScript end after all statements are executed. However, some applications may need the script to keep running. In this example, the script will enter a loop to do integration of Tag1 when user press Integrate button, The loop will continue until the user press

Stop button after which the integration loop stop and the script ends.

SmartPanel Object Setting

Object

Button Caption: Integrate

Style: Set Button

Properties TAG Description

StartInt

Pressing the button will set the value of StartInt to 1.

StartInt

Pressing the button will set the value of StartInt to 0

Button Caption: Stop

Style: Reset Button

Executer

File:CONTROL.EXE

Parameter: ..\PROJECT\PROJ1\CSL\INTEGRA

L.CSL /R

StartInt

Run the specified script when the value of

StartInt changes to 1

3-8

SmartScript User Manual Chapter 3

Object

StaticText

StaticText

Editor

TextMeter

Cation: Integration

Properties

Caption: Real Time Value

TAG Description

Show the text

“Real time

Value

Show the text

“Integration”

Tag1

User can use this object to enter the value of Tag1

Int_Tag1 Show the integral value

Int_Tag1

Note: Script files are stored under the CSL subfolder of the project. The project name is PROj1 and the script file name is

“INTEGRAL.csl “in this example.

Code

Line Code

1 PrevTime%={$TIME}

2 PrevValue={Tag1}

3 {Int_Tag1}=0

4 WHILE({StartInt})

5

6

7

{Int_Tag1}={Int_Tag1}+({Tag1}+PrevValue)*({$TIME}-PrevTime%)/2

PrevTime%={$TIME}

PrevValue={Tag1}

8 LOOP

9 END

Note: The Line numbers are jest for reference and are not part of the script code

TAG and Variables

Name Type Description

3-9

SmartScript User Manual Chapter 3

StartInt

Tag1

Int_Tag1

TAG

TAG

TAG

Use to control the start and stop of integration

Real time value

Integration value

$TIME

System TAG Its value will increase by 1 every second. It is used as a one second clock to trigger periodic event.

PrevTime% Integer Variable Used to store the previous value of $TIME

PrevValue Real Variable Used to store the previous value of Tag1

Script Description

Line 1: Set the initial value of PrevTime%

Line 2: Set the initial value of PrevValue

Line 3: Set the integration value Int_Tag1 to 0.

Line 4: Use StartInt=1 as the entering condition of a While loop. The loop stops and the script ends if StartInt=0. StartInt is also used as the tag to start running the script.

Line 5: Integrate Tag1. PrevValue is the value of Tag in previous integration calculation.

{$TIME}-PrevTime% is the time elapsed between the previous calculation and current calculation.

Line 6: Update the value o PrevTime%.

Line 7: Update the value of PrevValue.

Line 8: End of the loop.

Line9: End of the script. This SmartScript module will also end its execution.

When the user press Integrate button and set the value of StartInt to 1, the script is executed.

The script will first set the integration value to 0 and keep calculating the integration until the Stop button is pressed and StartInt is set to 0. If the user press Integrate button again, the script will be run again and reinitiate the integration calculation.

To keep the loop running when Lab-LINK is running, the condition of the WHILE loop can be set to1 to start an infinite loop. A infinite loop will keep running until Lab-LINK runtime ends. However, the infinite will consume system resource.

3-10

SmartScript User Manual Chapter 3

Tag Event

In some applications, it is more efficient to use Tag events instead of loops. The example in previous section will calculate the integration value at every recurrence of the loop even though the values of $TIME and Tag1 do not change. The integration script is rewritten in this example to use tag event to calculate integration. The panel object, Tags and variables settings are the same as the previous section , and only the script will be discuss here.

Code

Line Code

1 PrevTime%={$TIME}

2 PrevValue={Tag1}

3 {Int_Tag1}=0

3-11

SmartScript User Manual Chapter 3

Line Code

4 WHILE({StartInt})

5 LOOP

6 END

7 {$TIME}:

8 {Int_Tag1}={Int_Tag1}+({Tag1}+PrevValue)*({$TIME}-PrevTime%)/2

9 PrevTime%={$TIME}

10 PrevValue={Tag1}

11 RETURN

Note: The Line numbers are jest for reference and are not part of the script code

Script Description

Line 1: Set the initial value of PrevTime%.

Line 2: Set the initial value of PrevValue.

Line 3: Reset the integration value Int_Tag1 to 0.

Line 4: Use StartInt=1 as entering condition to start a While loop. If StartInt=0, the loop will stop and the script ends. StartInt is also used in the Executer object in panel to start the running of the script.

Line 5: End of loop.

Line 6: End of the main program and the script as well.

Line 7: Start of tag event of $TIME. By using the Tag as its label, the subroutine below will be executed when the value of $TIME changes.

Line 8: Integrate Tag1. PrevValue is the value of Tag in previous integration calculation.

{$TIME}-PrevTime% is the time elapsed between the previous calculation and current calculation.

Line 9: Update the value o PrevTime%.

3-12

SmartScript User Manual Chapter 3

Line 10: Update the value of PrevValue.

Line 11: End of the subroutine. Return to when it was interrupted in the main program and continue,

Similar to the example in the previous section, when the user press Integrate button and set the value of StartInt to 1, the script is executed. However, the script will enter the empty loop after the initial setting statement in the beginning. The loop itself contains no statement. When the value of

$TIME changes (once every second), the tag event subroutine with {$TIME}: will be run to calculate the integration. Since the calculation statement will be executed only once per second, it is more efficient. To keep the loop running when Lab-LINK is running, the condition of the WHILE loop can be set to1 to start an infinite loop. A infinite loop will keep running until Lab-LINK runtime ends. A more efficient alternative than the infinite loop is to use the IDLE statement which will no consume system resource. See chapter 5 for syntax and usage of these statements.

Important Issue Regarding Tag Event

Although Tag event is a very useful feature in SmartScript, programmers must be very careful to control its behaviors due to its event-driven nature. In general, a Tag event subroutine is a series of SmartScript statements that start with a line label which is a Tag name and end with the

RETURN statement. The code below is a typical example:

{Tag1}:

RETURN

// Other statements

// This is the Tag name line label

// Script code of Tag1 event subroutine

As shown below, there can be more than one Tag line table for each event subroutine. Data change of any of the Tags will trigger the execution of the event subroutine.

{Tag1}:

{Tag2}:

{Tag3}:

RETURN

// Other statements

// This is the first Tag name line label

// This is the second Tag name line label

// This is the third Tag name line label

// Script code of Tag1, Tag2 and Tag3 event subroutine

When the data of any of the event subroutine label Tag change, SmartScript logic execution will jump to the Tag label and execute the statements after the label until the RETURN statement is reached. Script logic will then return to the last statement before the event occurs and continue

3-13

SmartScript User Manual Chapter 3 with the execution of the remaining statements. The data changes triggering a Tag event include the changes of value, message, data, time and status field of the Tag data.

Since the change of Tag data will trigger a new event, if there is a new event triggered before the finish of a previous even, unpredictable result may occurs if the script logic is not properly controlled. There are two commands, namely TRAPOFF and TRAPON, designed to help programmers event triggering. TRAPOFF is used to suspend event triggering by setting a

TRAPOFF flag while TRAPON is used to do the opposite by resetting TRAPOFF flag to allow event triggering. When Tag event triggering is suspended, SmartScript will store all new Tag events occur during the period in the Event Queue. These buffered events will be executed after the event triggering is enabled again.

3-14

To help programmer understand how to use TRAPOFF and TRAPON in writing Tag event subroutines, the process flow of SmartScript event subroutines execution is described as follows.

 During the execution of SmartScript, if any Tag event is triggered and the corresponding event subroutine is not in the Event Queue, the new Tag event subroutine will be added into the Event Queue.

 After the execution of any SmartScript statement, the following examination and process will be done:

Check TRAPOFF flag. If the flag is not set, check if there is any Tag event subroutine in the Event Queue waiting for execution. If there is any event in the queue, retrieve the event subroutine from the queue and move the next statement pointer of SmartScript to the event subroutine.

If the previous executed statement is TRAPON, reset the TRAPOFF flag.

Continue with next statement.

 Based on description above, TRAPOFF and TRAPON can be used as shown in the example below to guarantee that the execution of an event subroutine will not be interrupted by any other new event.

-

{Tag1}:

TRAPOFF

TRAPON

RETURN

// Other statements

// TRAPOFF flag is set.

// Event triggering is disabled

// Script code of Tag1 event subroutine

// TRAPOFF flag is reset.

// Event triggering is enabled

When Tag1 event is triggered, the first statement executed is TRAPOFF (the line label is not considered as a statement). TRAPOFF will set TRAPOFF flag immediately and all new event will not be triggered but stored in the Event

SmartScript User Manual Chapter 3

-

Queue.

When the execution reaches the TRAPON statement, since SmartScript will first check the TRAPOFF flag (it is not reset yet at this moment) before resetting the

TRAPOFF flag, it will not execute any new event right away. Instead, SamrtScript will wait after the execution of the next statement, RETURN in this case, to find that TRAPOFF flag is reset and jump to the new event subroutine. By using these two commands, possibilities of interruption by any new event during the execution of the event subroutine can be excluded.

 The following problems may occur if TRAPOFF and TRAPON statement are not used:

During the execution of a Tag event subroutine, it is possible that script logic

execution can be switched to a new event. This may result in problems such as the difficulties in determining which event will be handled first and variable values may be changed by new events.

If an event subroutine is not completely executed before switching to a new event, the unfinished subroutine will be stored in a stack to wait for execution after the returning from the new event. In the case of large number of events triggered in a short period of time, many unfinished event subroutines will be accumulated in the stack. This may cause the system error of “Stack overflow” eventually and end the execution of the SmartScript module.

 Besides the discussion above, there are some more issues need to be considered when using Tag event subroutines:

During the execution of a Tag event subroutine, it is always possible that Tag data referenced in the subroutine can be modified by other Lab-LINK modules.

Programmer should make no assumption that Tag data will remain unchanged during the execution of the subroutine. To lessen the effect of this characteristic, it is recommended that Tag values can be stored in variables at the beginning of the event subroutine. Reference of Tag data can then be replaced by the variable values. However, please note that during the Tag data assignment to the variables, Tag data can still change during this relative short period of time.

For each Tag event subroutine, only one record is kept in the Event Queue.

Therefore, during the period that TRAPOFF flag is set.

If multiple Tag line labels share the same event subroutine, multiple instances of data changes of these Tags will only add the event routine

 once into the Event Queue. The position of the event subroutine in the

Event Queue is determined when it is first added into the queue.

If an event Tag changes data more than once, the event subroutine will only

3-15

SmartScript User Manual Chapter 3

be added once into the Event Queue. The position of the event subroutine in the Event Queue is determined when it is first added into the queue.

Due to the capacity of the Event Queue (512 events), the time required to run an event subroutine should be kept as short as possible. Otherwise, if more than

512 events are triggered during the TRAPOFF period, the events occur after the queue is full will be ignored.

Run a Script when a Panel is Opened

Some applications may need a script to be run only when a panel is opened. This can be achieved by using a similar loop as the previous example but with proper condition. This is useful when the script is only necessary for this display of the panel and should be close to prevent waste of system time when the panel is closed.

In the following example, when user press

“Open Panel” button to open a panel file, a script is run to accumulate the time the panel is opened.

SmartPanel Object Setting

3-16

SmartScript User Manual Chapter 3

Two panel files are used in this example: WKS1.PNL(The root panel) and SUBPANEL.PNL. Their settings are as follows:

WKS1.PNL

Object

Button

Properties

Caption: Open Panel

PopMacro X: 0

Y: 0

Width: 10000

Height: 8500

Panel File: ~1\subpanel.pnl

Style: Child Window

TAG Description

OpenPnl

Pressing the button will set the value of OpenPnl to 1.

OpenPnl

When OpenPnl is 1, a panel file subpanel.pnl will be opened.

When OpenPnl is 0, the panel will be closed.

SUBPANEL.PNL

Object

StaticText

StaticText

StaticText

StaticText

TextMeter

TextMeter

TextMeter

TextMeter

Properties

Caption: Accu. Open Time

TAG Description

Show the text

“Accu.

Open Time

Show the text

“Hours”

Caption: Hours

Caption: Minutes

Caption: Seconds

Dec. Digit: 0

Dec. Digit: 0

Dec. Digit: 0

File: CONTROL.EXE

Parameters: ..\PROJECT\PROJ1\C

SL\OPENTIME.CSL /R

Show the text

“Minutes”

Show the text

“Seconds”

OpenHour

Show the hour part of the accumulated time

OpenMin

Show the minute part of the accumulated time

OpenSec

Show the second part of the accumulated time

OpenPnl

Run the specified script when OpenPnl is 1

Note: Script files are stored under the CSL subfolder of the project. The project name is PROj1 and the script file name is

“OPENTIME.csl “in this example.

3-17

SmartScript User Manual Chapter 3

TAG and Variables

Name

OpenPnl

Type

TAG

OpenHour

TAG

OpenMin

TAG

Description

Used to control the open of SUBPANEL.PNL

The hour part of the accumulated open time.

The minute part of the accumulated open time.

OpenSec

TAG

$TIME

System TAG

The second part of the accumulated open time.

The system tag whose value will increase by 1 per second. Used as one second clock.

OpenTime% Integer

Variable

Used to store the total accumulation open time in seconds.

PrevTime% Integer

Variable

Used to store the previous value of $TIME

Code

Line Code

1 OpenTime%={OpenHour}*3600+{OpenMin}*60+{OpenSec}

2 PrevTime%={$TIME}

3 WHILE({OpenPnl})

4 LOOP

5 END

6 {$TIME}:

7 OpenTime%=OpenTime%+{$TIME}-PrevTime%

8 {OpenHour}=OpenTime%/3600

9 {OpenMin}=(OpenTime%\3600)/60

10 {OpenSec}=(OpenTime%\3600)\60

11 PrevTime%={$TIME}

12 RETURN

3-18

SmartScript User Manual Chapter 3

Note: The Line numbers are jest for reference and are not part of the script code

Script Description

Line 1: Calculate the total seconds and store it to OpenTime%

Line 2: Set initial value of PrevValue%.

Line 3: Use OpenPnl=1 as entering condition to start a While loop. When

SUBPANEL.PNL is closed and caused OpenPnl=0, the loop is stopped and the script ends. OpenPnl is also the tag used to open and close the panel SUBPANEL.PNL.

Line 4: end of loop.

Line 5: End of the main program and the script as well.

Line 6: Start of tag event of $TIME. By using the Tag as its label, the subroutine below will be executed when the value of $TIME changes.

Line 7: Accumulate the open time of the panel SUBPANEL.PNL. PrevValue% is the value of Tag1 at previous loop recurrence. {$TIME}-PrevTime% is the time elapsed since last loop recurrence. The statement add the elapsed time to the accumulated time.

Line 8: Calculate the hour part of the accumulated time.

Line 9: Calculate the minute part of the accumulated time.

Line 10: Calculate the second part of the accumulated time.

Line 11: Update the value of PrevTime%.

Line 12: End of the event subroutine and return to the main program.

3-19

SmartScript User Manual Chapter 3

Communication Application

SmartScript can also be used to write IO communication program to support the communication with IO devices. The example below illustrate the communication with an instrument which use a very simple ASCII protocol. A command

“#S00\r” will be sent from the PC to the instrument for reading its data. The returned data from the instrument is always with the fixed length of 11 ASCII character. Data reside at the fourth to the eighth character. The example script wil l poll the instrument at one second interval, acquire the value part from the returned data and save the data to a tag named Data-01. The script can be set to run when the Lab-LINK project similar to the first example of this chapter.

TAG and variables

Name Type Description

Data-01

TAG

C$ String Variable

Used to store the data value.

Used to store the command string for reading data.

R$

V$

TickBeg

String Variable Used to store the string returned by the instrument.

String Variable Used to store the value parsed from the returned string.

Variable Used to store the previous TICK value. TICK is a time function in mini seconds.

CommLoop Label Label for the GOTO statement

Code

Line Code

1 C$ = "#S00\r"

2 COMOPEN 1, "COM1:9600,N,8,1", 1024, 256

3 IF (! FCHECK(1))

4

5

MESSAGE " Test Program", "Can not open communication port"

STOP

6 ENDIF

3-20

SmartScript User Manual Chapter 3

Line Code

7 CommLoop:

12

13

14

10

11

8

9

WRITE 1, C$

WHILE (FLEN(1) < 11)

LOOP

READ 1, R$, 11

V$ = MID$(R$, 4, 5)

{Data-01} = VAL(V$)

TickBeg = TICK()

15

16

WHILE (TICK()-TickBeg < 1000)

LOOP

17 GOTO CommLoop:

18 END

Note: The Line numbers are jest for reference and are not part of the script code

Script Description

Line 1: Store the data reading command string to the variable C$.

“\r” is the Carriage

Return control character.

Line 2: Open communication port COM1 with the communication parameters: 9600, N,

8,1. Set the capacity of Interrupt-driven receive-queue to 1024 characters, and the capacity of Interrupt-driven transmit-queue to 256 characters.

Line 3-6: Handle communication port open failure. Show a message on the screen and end the script after user acknowledgement.

Line 7-17: The GOTO loop to handle communication.

3-21

SmartScript User Manual Chapter 3

Line 8: Send the command string C$ to read data.

Line 9-10: Wait until ay least 11 characters of return data received in the Interrupt-driven receive-queue.

Line 11: Take the first 11 characters in the Interrupt-driven receive-queue and store it to

R$.

Line 12: Take the fourth to the eighth characters from R$, the value part, and store it to

V$.

Line 13: Use VAL function to covert V$ from a string to a number and assign the number to the value of tag Data-01.

Line 14-16: Wait 1000tick (1000 msec or 1second).

Line 17: Go back to the beginning of the GOTO loop, the label CommLoop, to repeat the operation.

Lien 18: End of script.

3-22

Chapter 4 Syntax

Overview

The SmartScript Module provides users with a complete programming environment, allowing communication with other modules of Lab-LINK for Windows, and acts as a built in program development tool. SmartScript Module contains most of the commands and functions found in traditional BASIC or C but also includes additional statements, which deal with specific features of

Lab-LINK.

SmartScript contains families of commands allowing maintenance of files, control of asynchronous devices, and playing of music and sound. An editor with program debugging capability is provided to simplify software development and code modification.

Command Line

CONTROL.EXE, located in the system folder of Lab-LINK, is the execution file of SmartScript.

Its command line can include the parameters:

CONTROL.EXE [source-file [/R]]

Option Description

source-file

source-file /R

Name of the script file loaded when SmartScript starts.

Causes SmartScript to load and run a program file.

Line Label

Every program line may begin with a line label. Line labels are used as references of branching.

The characters allowed in a line labels are alphanumerical characters and underscore. Line label must be within the length between 1 to 16, and the first character must be a letter. Some special type declaration characters are also allowed—see below.

4-1

SmartScript User Manual Chapter 4

A line label may be a reserved word or may contain an embedded reserved word, though this is not recommend. Reserved words include all commands, statements, function names and operator names.

When a line label enclosed in the curly brackets, it is a special kind of line label called TAG label.

In this case the label name within the curly brackets must be a TAG name. Whenever the value of the corresponding TAG changed, the original program flow will be suspended, and the statement block following the label will be executed. After execution of this statement block, the original program flow will be resumed.

Character Set

SmartScript Module character set includes alphabetic characters (A-Z, a-z), numeric characters

(0-9 and A-F or a-f for hexadecimal numbers), and special characters. Some characters have special meanings in SmartScript Module:

Data-Type Suffixes

% Integer

$ String

{} TAG

Mathematical Operators

4-2

\ Integer division symbol (backslash)

^ Exponentiation symbol (up arrow or caret)

Relational operators

>= Greater than or equal to

<= Less than or equal to

== Equal to

SmartScript User Manual Chapter 4

Logical operators

Bitwise operators

~ Invert

<< Shift left

>> Shift right

^< Rotate left

>^ Rotate right

Special

= Assignment symbol

: Line label suffix

@ Break point mark

, Parameter delimiter

=> Then symbol

// Comment line

Constants

Constants are the actual values SmartScript Module users during execution. There are two types of constants: string and numeric.

String Constant

A string constant is a sequence of characters enclosed in double quotation marks. Examples of string constants:

“$25,000.00”

“This is a test.”

The characters enclosed in double quotation mark may be alphanumeric or special characters.

The escape sequences allow you to use a sequence of characters to represent special characters. Escape sequences are listed below.

4-3

SmartScript User Manual Chapter 4

Sequence Name

\Dnnn

\nnn

\xnn

\Xnn

\hnn

\Hnn

\" Double Quotation Mark

\\ Backslash

\bnnnnnnnn

\Bnnnnnnnn

ASCII character in binary notation

\onnn

\Onnn

\0nnn

\dnnn

ASCII character in octal notation

ASCII character in decimal notation

ASCII character in hexadecimal notation

Numeric Constant

Numeric constants are positive or negative numbers. Numeric constants in SmartScript Module cannot contain commas. There are seven types of numeric constants:

Whole numbers between -2147483648 and +2147483647. Integer constants do not have decimal points.

2. Fixed Point Constants

Positive or negative real numbers, i.e., numbers that contain decimal points.

3. Floating Point Constants

Positive or negative numbers represented in exponential form (similar to scientific notation).

A floating-point constant consists of an optionally signed integer or fixed-point number (the mantissa) followed by the letter E and an optionally signed integer (the exponent). The allowable range for floating point constants is 10

-308

to 10

+308

, and contains up to 16 significant digits.

Examples:

476.983E-6 = 0.000476983

4-4

SmartScript User Manual Chapter 4

523E3 = 523000

A special keyword “PI” presents the floating-point constant

π (3.141592653589793).

Decimal numbers with no prefix or the prefix 0d or 0D.

Examples:

1024

0d13

0D27

Hexadecimal numbers with the prefix 0x, 0X, 0h or 0H.

Examples:

0x41FF

0X0D

0hE6

0H1A0

Octal numbers with the prefix 0o or 0O.

Examples:

0o10

0O361

Binary numbers with the prefix 0b or 0B.

Examples:

0b1010

0B11000011

Variables

Variables are names used to represent values that are used in a SmartScript Module Program.

The value of a variable may be assigned explicitly by the programmer, or it may be assigned as the result of calculations in the program. Before a variable is assigned a value, its value is assumed to be zero.

Variable Names and Declaration Characters

The characters allowed in a variable name are letters and numbers, and the underscore.

Variable names must be in the length 1 to 16, and the first character must be a letter. Special type declaration characters are also allowed—see below.

A variable name may not be a reserved word, but may contain an embedded reserved word.

Reserved words include all commands, statements, function names and operator names.

4-5

SmartScript User Manual Chapter 4

Variables may represent either a numeric value or a string. String variable names are written with a dollar sign ($) as the last character. For example: A$ = “Hello the world”. The dollar sign is a variable type declaration character; that is, it “declares” that the variable will represent a string.

Numeric variable names may declare integer or real (double precision) values. The type declaration characters for these variable names are as follows:

4-6

The default type for a numeric variable name is real.

Examples of variable names follow.

N% declares an integer value

LIMIT declares a real value

MSG$ declares a string value

Tag Variables

In SmartScript, a special kind of variables called TAG variables is used to access and manipulate TAG data. TAG variables should be named as follows:

{tag-name} tag-name is the name of a TAG. If the TAG does not exist, it will be created.

{tag-name} can be used just like a regular numeric variable (double precision) , and it presents the value field of the TAG. Any modification made to the TAG variable will modify the value field of tag-name as well.

{tag-name.$} tag-name is the name of a TAG. If the TAG does not exist, it will be created.

{tag-name.$} can be used just like a regular string variable, and it presents the message field of the TAG. Any modification made to the TAG variable will modify the message field of tag-name as well.

{tag-name.t} tag-name is the name of a TAG. The variable can also be denoted as

{tag-name.T}. If the TAG does not exist, it will be created. {tag-name.t} can be used just like a regular numeric variable. Its integer part represents the date field of the TAG, and its fraction part represents the time field of the TAG. Both integer and fraction parts are of the same unit of days. Any modification made to the

TAG date/time variable will modify the date and time field of tag-name as well.

Note: When the value or message field of a TAG is modified, the system will update the date and time fields of the TAG automatically to indicate the date and time the TAG data is changed.

SmartScript User Manual Chapter 4

{tag-name.s} tag-name is the name of a TAG. The variable can also be denoted as

{tag-name.S}. If the TAG does not exist, it will be created. {tag-name.s} can be used just like a regular numeric variable but its value represents the 16 bits binary encoded status field of the tag. Definition of the status bits are shown in the table below. Bit operators >> (Right shift) and AND can be used to acquire the specific status bit(s) of the tag status variable.

Bits Category Meaning of Values Right Shift >> AND MASK

0 0x0007

3 Output

Status

1: Uncertain

2: Offline

3: Online

0: Success

1: Fault

4~6 Alarm Status 0: Normal

1: HI alarm

2: LO alarm

3: HH alarm

4: LL alarm

3 0x0008

4 0x0070

7 0x0080

Status

8~16 Reserved

1: Acknowledged

Array Variables

An array is a group or table of values referenced by the same variable name. Each element in an array is referenced by an array variable that is subscripted with an integer or an integer expression. An array variable name has as many subscripts as there are dimensions in the array. For example V(6) would reference a value in a one-dimension array, M(2, 7) would reference a value in a two-dimension array, and so on. The maximum number of dimensions for an array is 3. The maximum number of elements of all dimensions is 8,192.

Memory Space Requirements

Variables Arrays Strings

Integer 4 Bytes per element

8 Bytes per element

3 bytes overhead plus the present contents of the string

4-7

SmartScript User Manual Chapter 4

Type Conversion

When necessary, SmartScript Module will convert a numeric constant from one type to another.

The following rules and examples should be kept in mind.

1. If a numeric constant of one type is set equal to a numeric variable of a different type, the number will be stored as the type declared in the variable name. (If a string variable is set equal to a numeric value or vice versa, a “Type mismatch” error occurs.)

Example:

N% = 32.64

After this statement was executed, the value of N% is 32.

2. During expression evaluation, all of the operands in an arithmetic or relational operation are converted to the same degree of precision; i.e., that of the most precise operand. Also, the result of an arithmetic operation is returned to this degree of precision.

Examples:

A = 15.0 / 2

The arithmetic equation is performed in double precision and the result was returned in A as a double precision value. After this statement was executed, the value of A is 7.5.

A = 9 / 5

The arithmetic was performed in integer precision and the result was returned in A as a double precision value. After this statement was executed, the value of A is 1.0.

3. Logical operators convert their operands to integers and return an integer result.

Example:

N% = 2.5 XOR 1

After this statement was executed, the value of N% is 3.

When a floating-point value is converted to an integer, the fractional portion is rounded.

Example:

N% = 6.67

M% = -6.67

After this statement was executed, the value of N% is 6 and M% is -6.

Expressions and Operations

An expression may be a string or numeric constant, or a variable, or it may combine constants and variables with operators to produce a single value.

Operators perform mathematical or logical operations on values. The operators provided by

4-8

SmartScript User Manual Chapter 4

SmartScript Module may be divided into four categories:

1. Arithmetic

2. Relational

3. Logical

4. Bitwise

Arithmetic Operators

The arithmetic operators, in order of precedence, are:

Operator Operation

- Negation

^

*

Exponentiation

Multiplication

+

-

/

\

Division

Integer Modulus

Addition

Subtraction

Sample Expression

-X

X ^ Y

X * Y

X / Y

X \ Y

X + Y

X - Y

To change the order, in which the operations are performed, use parentheses. Operations within parentheses are performed first. Inside parentheses, the usual order of operations is maintained.

Here are some sample algebraic expressions and their SmartScript Module counterparts.

SmartScript Module Expression

X + 2 * Y

Algebraic Expression

X

+

2

Y

X

Y

Z

X

Y

Z

X

+

Y

Z

(

2

X )

Y

Y

Z

X

X

⋅ −

Y

X – Y / Z

X * Y / Z

(X + Y) / Z

X ^ 2 ^ Y

X ^ (Y ^ Z)

X * -Y

4-9

SmartScript User Manual Chapter 4

Integer Modulus Arithmetic

Integer modulus arithmetic is denoted by the backslash (\). The operands are rounded to integers before the modulus is performed, and it gives the integer value that is the remainder of an integer division.

Example:

N% = 8.9 \ 3

After this statement was executed, the value of N% is 2.

Division by Zero

If, during the evaluation of an expression, a division by zero is encountered, the “Division by

Zero !!” error message is displayed, and execution stops.

Relational Operators

Relational operators are used to compare two values. The result of the comparison is either

“True” (one) or “False” (zero). This result may then be used to make a decision regarding program flow. The relational operators, in order of precedence, are:

Operator Operation

> Greater than

<

>=

Less than

Greater than or equal to

<=

==

!=

Less than or equal to

Equality

Inequality

Sample Expression

X > Y

X < Y

X >= Y

X <= Y

X == Y

X != Y

When arithmetic and relational operators are combined in one expression, the arithmetic is always performed first. For example, the expression

X + Y < (Z + 5) / W is true if the value of X plus Y is less than the value of Z+5 divided by W. More examples:

B% = LIMIT > 95.0

IF (B%) => GOSUB HiAlarm:

IF (SIN(X) < 0) => GOTO Label1:

IF (N% \ 2 != 0) => L% = L% + 1

IF (A$ == “EXIT”) => STOP

4-10

SmartScript User Manual Chapter 4

Logical Operators

Logical operators perform tests on multiple relations or Boolean operations. The logical operator returns an result which is either “True” (one) or “False” (zero). The logical operators, in order of precedence, are:

Operator Operation

! Logic NOT

&

|

Logic AND

Logic OR

Sample Expression

! (X > Y)

X > 10.5 & Y < 21.3

N% < 0x30 | N% > 0x39

The outcome of a logical operation is determined as shown in the following table.

! (Logical NOT)

X

True (not zero)

! X

False (zero)

False (zero) True (one)

X

True (not zero)

True (not zero)

False (zero)

False (zero)

& (Logical AND)

Y

True (not zero)

False (zero)

True (not zero)

False (zero)

X & Y

True (one)

False (zero)

False (zero)

False (zero)

X

True (not zero)

True (not zero)

False (zero)

False (zero)

| (Logical OR)

Y

True (not zero)

False (zero)

True (not zero)

False (zero)

X | Y

True (one)

True (one)

True (one)

False (zero)

Just as the relational operators can be used to make decisions regarding program flow, logical operators can connect two or more relations and return a true or false value to be used in a decision (see IF statement).

4-11

SmartScript User Manual Chapter 4

Examples:

IF (A >= 0) & (A <= 100) => GOTO Label1:

B% = (N% < 48) | (N% > 57)

IF ! B% => GOTO Label2:

Bitwise Operators

Bitwise operators perform bit manipulation and return a bitwise result. The operands are rounded to integers before the bit manipulation is performed, and it returns the integer value that is the bitwise result of the operation. The bitwise operators, in order of precedence, are:

Operator Operation

~ Invert

<<

>>

Shift left

Shift right

^<

>^

AND

XOR

OR

Rotate left

Rotate right

AND

XOR

OR

Sample Expression

X << 3

X >> 8

X ^< 1

X >^ 2

X AND 0x00FF

X XOR 0b10101010

X OR Y

The outcome of a bitwise operation is determined as shown in the following table.

~ (Invert)

X ~ X

1 0

0 1

X

AND

Y X AND Y

1 1 1

1 0 0

0 1 0

0 0 0

4-12

SmartScript User Manual Chapter 4

XOR

X Y X XOR Y

1 1 0

1 0 1

0 1 1

0 1 1

X

OR

Y X OR Y

1 1 1

1 0 1

0 1 1

0 0 0

Shift and Rotate

<< (Shift left)

15 0

0

>> (Shift right)

0

15 0

^< (Rotate left)

15 0

>^ (Rotate right)

15

String Operations

Strings may be concatenated using “+”.

Example:

A$ = “ABC”

B$ = “DEF”

C$ = A$ + “ ” +B$

0

4-13

SmartScript User Manual Chapter 4

After these statements was executed, the value of C$ is “ABC DEF”.

Strings may be compared using the same relational operators that are used with numbers:

> >= < <= == !=

String comparisons are made by taking one character at a time from each string and comparing the ASCII codes. If all the ASCII codes are the same, the strings are equal. If the

ASCII codes differ, the lower code number precedes the higher. If, during string comparison, the end of one string is reached, the shorter string is said to be smaller. Leading and trailing blanks are significant.

Examples:

“IS” < “IT”

“OK” != “ok”

“This ” > “This”

“kg” > “KG”

“NOT” < “NOTE”

4-14

Chapter 5 Statements and Functions

How to use this chapter

This chapter describes in detail the various statements and functions applicable to SmartScript

Module. Most descriptions consist of five parts, FUNCTION, VERSIONS, FORMAT, REMARKS and

EXAMPLE, which are listed below.

FUNCTION

VERSIONS

FORMAT

REMARKS

EXAMPLE

A brief explanation of the statement.

Indicates which versions of Control Script Module support the particular statement.

Describes the statement syntax according to the following conventions:

CAPS Keywords are indicated by capital letters and should be entered as shown.

Italics Items in italics represent variable information to be supplied by the user.

[ ] Square brackets indicate optional parameters.

An ellipsis indicates an item may be repeated as many times as necessary.

| Vertical bar indicates alternative option.

Punctuation must be indicated where indicated except for square brackets and the ellipsis.

Supplies additional information in detail regarding correct statement usage.

Illustrates various ways of using the statement and highlights, where applicable, unusual modes of operation.

5-1

SmartScript User Manual Chapter 5

Keywords by Programming Task

Programming task Keywords included in this list

Control program flow

Perform mathematical calculations

Manipulate strings

Get the system time

IF...ELSE...ELSEIF...ENDIF,

CHOICE(),

SWITCH...CASE...DEFAULT...ENDSW,

FOR...LOOP,

WHILE...LOOP,

CONTINUE, EXIT,

GOTO,

GOSUB...RETURN,

STOP, END

IDLE

SLEEP

SIN(), COS(), TAN(), ASIN(), ACOS(), ATAN(), SINH(), COSH(),

TANH(), EXP(), LN(), LOG(), SQRT(), ABS(), RAND(), FAC(), MIN(),

MAX(), INT(), FMBCD(), FMFLT(), FMDBL()

LEN(), VAL(), IVAL(), ASC(), STR$(), ISTR$(), CHR$(), STRING$(),

LEFT$(), RIGHT$(), MID$(), LOWER$(), UPPER$(), LTRIM$(),

RTRIM$(), SUM08(), XOR08(), CRC16(),CRC32(),

TOKEN,FORMAT$(), DATETIME$()

TIMER(), SECOND(), MINUTE(), HOUR(), DAY(), WEEKDAY(),

MONTH(), YEAR(), TICK(), NOW(), NOW$()

File input/output

Declare array

Set traps for TAG events

Misc.

CREATE, OPEN, COMOPEN, SEEK, READ, WRITE, FPRINT, CLOSE,

FCHECK(), FLEN(), FPOS(), CD, MD, RD, COPY, MOVE, DEL, DIR$(),

COMMODE, SHORTCUT,FILE$()

DIM

TRAPON, TRAPOFF

PI, BEEP, PLAY, MESSAGE, MSGBOARD, EXEC, SETDIR,

ALMTAG$(), ALARM(), TAG(), ALMGRP(), ALMPRI(), ERRID(),

ERRORTAG, NERR(),RSTERR, PASS, SHUTDOWN, SYSINFO$(),

TONE

5-2

SmartScript User Manual Chapter 5

Statements and Functions

This section consists of an alphabetical listing of all statements and functions with a detailed description of each.

ABS() Function

FUNCTION ABS returns the absolute value of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = ABS(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

x

.

EXAMPLE

Y = ABS(45.5 - 100) // Y will be 54.5

ACOS() Function

FUNCTION ACOS returns the arccosine of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = ACOS(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

 cos(

x

)

1

.

The ACOS function returns an angle in radians. To convert from radians to degrees, divided radians by (PI /180).

EXAMPLE

Y = ACOS(0) / PI * 180 // Y will be 90

5-3

SmartScript User Manual Chapter 5

ALARM() Function

FUNCTION ALARM returns the alarm status of the specified Tag.

VERSIONS 1.1 and above

FORMAT

Y = ALARM(string-expression)

REMARKS

string-expression must be a string expression representing a Tag name.

The return value of this function is the alarm status of the Tag specified by the string expression. Meanings of alarm status values are explained as follows:

0x00 Normal

0x01 High alarm (Analog alarm) or Alarm (Digital alarm)

0x02 Low alarm(Analog alarm)

0x03 High-high alarm (Analog alarm)

0x04 Low-low alarm (Analog alarm)

0x81 Acknowledged High alarm (Analog alarm) or alarm (Digital alarm)

0x82 Acknowledged Low alarm (Analog alarm)

0x83 Acknowledged High-high alarm (Analog alarm)

0x84 Acknowledged Low-low alarm (Analog alarm)

EXAMPLE

N% = ALARM(“AI-0001”)

5-4

SmartScript User Manual Chapter 5

ALMGRP() Function

FUNCTION ALMGRP returns the alarm group of the specified Tag

VERSIONS 1.2 and above

FORMAT

N% = ALMGRP(string-expression)

REMARKS

string-expression must be a string expression representing a Tag name.

Return value of this function is the alarm group the Tag specified by the string expression belongs to. If the Tag specified by the string-expression is not defined as an alarm, the return value will be 0. If string-expression is an empty string, the return value will be -1.

EXAMPLE

N%= ALMGRP(“Tag1”)

ALMPRI() Function

FUNCTION ALMPRI return the alarm priority of the specified Tag.

VERSIONS 1.2 and above

FORMAT

N% = ALMPRI(string-expression)

REMARKS

string-expression must be a string expression representing a Tag name.

Return value of the function is the alarm priority of the Tag specified by

string-expression. If the Tag specified by the string-expression is not defined as an alarm, the return value will be 0. If string-expression is an empty string, the return value will be -1.

EXAMPLE

N%= ALMPRI(“Tag1”)

5-5

SmartScript User Manual Chapter 5

ALMTAG$()

函數

FUNCTION ALMTAG$ returns the tag name of the active alarm which has the highest priority.

VERSIONS 1.1 and above

FORMAT

A$ = ALMTAG$()

REMARKS

Return value of this function is a string. The string is the tag name of the alarm which has the highest priority or is the newest among all active alarm. Which alarm is the highest priority alarm is determined by the following logics:

(1) If there are more than one active alarms and some of the alarms are not acknowledged, the unacknowledged alarm that has the highest alarm priority setting is the highest priority alarm. In other word, unacknowledged alarm s have higher priority than acknowledged alarms.

(2) If all active alarms are acknowledged, the acknowledged alarm with the highest alarm priority setting is the highest priority alarm.

(3) If multiple alarms have the same priority setting, the newest alarm among them is the highest priority alarm.

The highest priority alarm is also the alarm shown in AlarmBar object in

SmartPanel.

EXAMPLE

A$ = ALMTAG$()

5-6

SmartScript User Manual Chapter 5

ASC() Function

FUNCTION ASC returns the value of the ASCII code of the first character in the specified string.

VERSIONS 1.0 and above

FORMAT

N% = ASC(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

N% = ASC("Q") // N% will be 81

ASIN() Function

FUNCTION ASIN returns the arcsine of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = ASIN(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

 sin(

x

)

1

.

The ASIN function returns an angle in radians. To convert from radians to degrees, divided radians by (PI /180).

EXAMPLE

Y = ASIN(1) / PI * 180 // Y will be 90

5-7

SmartScript User Manual Chapter 5

ATAN() Function

FUNCTION ATAN returns the arctangent of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = ATAN(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

 tan(

x

)

1

.

The ATAN function returns an angle in radians. To convert from radians to degrees, divided radians by (PI /180).

EXAMPLE

Y = ATAN(1) / PI * 180 // Y will be 45

BEEP Statement

FUNCTION BEEP generates a beep sound from your computer's speaker.

VERSIONS 1.0 and above

FORMAT

BEEP

REMARKS

This statement generates a beep sound from your computer's speaker.

EXAMPLE

BEEP

5-8

SmartScript User Manual Chapter 5

CD Statement

FUNCTION Change current working directory to the specified path .

VERSIONS 4.0 and above

FORMAT

CD directory-name

REMARKS

directory-name Must be a string expression representing a valid path.

EXAMPLE

CD “..\\Project\\Proj1\\Dat\”

// Change current directory to ..\Project\Proj1\Dat\

CHOICE() Function

FUNCTION CHOICE returns the true expression or false expression depends on conditional expression.

VERSIONS 1.0 and above

FORMAT

Y = CHOICE(cond-expression, true-expression, false-expression)

REMARKS

cond-expression may be any expression. If it evaluates to true (non-zero), then evaluate true-expression and return its type and value as the function’s result. If it evaluates to false (zero), then evaluate

false-expression and return its type and value as the function’s result.

true-expression

false-expression may be any numeric expression. It is evaluated only when

cond-expression evaluates to true. may be any numeric expression. It is evaluated only when

cond-expression evaluates to false.

EXAMPLE

Y = CHOICE(Y >= 0, Y + 1, Y - 1)

5-9

SmartScript User Manual Chapter 5

CHR$() Function

FUNCTION CHR$ returns a character from the specified ASCII code.

VERSIONS 1.0 and above

FORMAT

M$ = CHR$(numeric-expression)

REMARKS

numeric-expression is a numeric expression in the range 0 to 255.

EXAMPLE

M$ = CHR$(13) + CHR$(10)

// M$ will be “\r\n”

CLOSE Statement

FUNCTION CLOSE closes an opened file or device.

VERSIONS 1.0 and above

FORMAT

CLOSE [file-number]

REMARKS

file-number is the number under which the file or device was opened.

CLOSE with no arguments closes all opened files and devices.

EXAMPLE

CREATE 1, "TEST.TXT"

CLOSE 1

5-10

SmartScript User Manual Chapter 5

COMMODE Statement

FUNCTION COMMODE is used to change the communication parameters of an opened communication device.

VERSIONS 4.0 and above

FORMAT

COMMODE file-number,comm-param

REMARKS

file-number comm-param

is an integer expression whose value should reference the file number of an opened communication device. is a string expression used to specify the communication parameters of the specified communication device. Format of the parameter is identical to the format used in MODE command in Command Prompt shell of Windows.

EXAMPLE

COMOPEN 1, “COM2:9600,N,8,1”, 2048, 1024

COMMODE 1,”COM2:19200,E,7,1”

5-11

SmartScript User Manual Chapter 5

COMOPEN Statement

FUNCTION COMOPEN is used to open a communications device file.

VERSIONS 1.0 and above

FORMAT

COMOPEN file-number, comm-param, in-queue, out-queue

REMARKS

file-number comm-param in-queue out-queue is an integer expression, which evaluates to a valid file number.

The number is then associated with the file for as long as it is open and is used by other communications I/O statements to refer to the file. The valid file numbers are 1 to 16. is a string expression that specifies the device-control information for a device. The string must have the same form as the DOS MODE command-line parameter. is an integer expression that specifies the size of the interrupt-driven receive-queue. is an integer expression that specifies the size of the interrupt-driven transmit-queue.

EXAMPLE

COMOPEN 1, “COM2:9600,N,8,1”, 2048, 1024

5-12

SmartScript User Manual Chapter 5

CONTINUE Statement

FUNCTION CONTINUE passes control to the next iteration of the smallest enclosing FOR or

WHILE statement in which it appears.

VERSIONS 1.0 and above

FORMAT

CONTINUE

REMARKS

For more information, see FOR … LOOP, WHILE … LOOP and EXIT statements.

EXAMPLE

FOR N%=0 TO 10

IF (N% == 3) => CONTINUE

...

LOOP

COPY Statement

FUNCTION COPY copies the specified file or folder to the specified target path.

VERSIONS 4.0 and above

FORMAT

COPY source-path,target-path

REMARKS

source-path target-path

is a string expression used to specify the path of the source file or folder. is a string expression used to specify the path of the target file or folder.

The statement may fail if the source file does not exist, the target path does not exist, or there is other reason prevents its proceeding. The failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

If the target file exists, COPY statement will overwrite the file with the source file.

EXAMPLE

COPY “C:\\Proj1\\Log.txt”,” C:\\Proj2\\LogFile.txt”

5-13

SmartScript User Manual Chapter 5

COS() Function

FUNCTION COS returns the cosine of the specified angle.

VERSIONS 1.0 and above

FORMAT

Y = COS(numeric-expression)

REMARKS

numeric-expression must be an angle expressed in radians.

This function is equivalent to the algebraic expression y

 cos(x )

.

To convert from degrees to radians, multiply degrees by (PI / 180).

If the target file exists, COPY statement will overwrite the file with the source file.

EXAMPLE

Y = COS(180 * (PI / 180)) // Y will be -1

COSH() Function

FUNCTION COSH returns the hyperbolic cosine of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = COSH(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

 cosh(x )

.

EXAMPLE

Y = COSH(1) // Y will be 1.543081

5-14

SmartScript User Manual Chapter 5

CRC16() Function

FUNCTION CRC16 returns the value of CRC-16 of the specified string. CRC-16 is an algorithm commonly used in communication protocol for error checking.

VERSIONS 1.0 and above

FORMAT

N% = CRC16(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

N% = CRC16(“\x02ABC\x03”)

// N% will be -9832

CRC32() Function

FUNCTION CRC32 returns the value of CRC-32 of the specified string. CRC-32 is an algorithm commonly used in communication protocol for error checking.

VERSIONS 4.0 and above

FORMAT

N% = CRC32(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

N% = CRC32(“\x02ABC\x03”)

// N% will be -1375105033

5-15

SmartScript User Manual Chapter 5

CREATE Statement

FUNCTION CREATE creates a new file and opens it.

VERSIONS 1.0 and above

FORMAT

CREATE file-number, file-name

REMARKS

file-number is an integer expression, which evaluates to a valid file number.

The number is then associated with the file for as long as it is open and is used by other file I/O statements to refer to the file.

The valid file numbers are 1 to 16. is a string expression, which names the file to be opened. file-name

If the file does not exist, the statement creates a new file and opens it for writing. If the file does exist, the statement truncates the file size to zero and opens it for reading and writing. When the statement opens the file, the read-write pointer is set to the beginning of the file.

EXAMPLE

CREATE 1, "TEST.TXT"

CLOSE 1

DATETIME$() Function

FUNCTION DATETIME$ convert a real number into a date/tuime string..

VERSIONS 4.0.0.10 and above

FORMAT

M$ = DATETIME$( numeric- expression)

REMARKS

numeric-expression is an real number expression. Its value should represent a date/time. For example, it can be a TAG data/time variable. The output string has the format of

yyyy/mm/dd hh:ii:ss”, where yyyy is the four digits year part, mm is the two digits month part, dd is the two digits day part, hh is the two digits hour part, ii is the two digits minute part, ss is the two digits second part of a complete date.time notation. The length of the output string is fixed at 19 charcters.

EXAMPLE

M$= DATETIME$({Tag1.t}) // M$ is the date/time filed of Tag1 represented as a

// string

5-16

SmartScript User Manual Chapter 5

DAY() Function

FUNCTION DAY returns the current day of month.

VERSIONS 1.0 and above

FORMAT

N% = DAY()

REMARKS

This function returns the current day of month (1 ~ 31)

EXAMPLE

N% = DAY()

DEL Statement

FUNCTION DEL is used to delete a file or a folder.

VERSIONS 4.0 and above

FORMAT

DEL path

REMARKS

path

is a string expression used to specify a file path.

DEL may fail If the specified file does not exist or there is other reason prevents its deletion. The failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

DEL can delete the specified file even it has read-only attribute set.

EXAMPLE

DEL “C:\\Lablink\\Project\\Proj1\\Txt\\Log.txt”

5-17

SmartScript User Manual Chapter 5

DIM Statement

FUNCTION DIM specifies the maximum values for array variable subscripts and allocates storage accordingly.

VERSIONS 1.0 and above

FORMAT

DIM variable(numeric-const [, numeric-const [, numeric-const]])

REMARKS

variable

numeric-const may be any array variable name. specifies the maximum values for array subscripts and must be an integer constant.

The DIM statement sets all the elements of the specified array to an initial value of zero. The maximum allowable number of dimensions for an array is 3. The maximum allowable number of elements is 8,192. The minimum value for a subscript is always

1.

This statement is a non-executable statement.

EXAMPLE

DIM A(10)

A(1) = 6.5

DIR$() Function

FUNCTION DIR$() can be used to query for current directory, Windows and system directory.

VERSIONS 4.0 and above

FORMAT

M% = DIR$(

“NOW”|”WIN”|”SYS”)

REMARKS

NOW

-Query for current directory.

WIN

-Query for Windows directory.

SYS

-Query for Windows system directory.

EXAMPLE

M1$ = DIR$(“NOW”)

M2$ = DIR$(“WIN”)

M3$ = DIR$(“SYS”)

// M1$ = “C:\Lablink\System4”

// M2$ = “C:\Windows”

// M3$ = “C:\Windows\System32”

5-18

SmartScript User Manual Chapter 5

END Statement

FUNCTION END terminates program execution and closes all files.

VERSIONS 1.0 and above

FORMAT

END

REMARKS

END statements may be placed anywhere in the program to terminate execution. An

END statement at the end of a program is optional.

EXAMPLE

IF (A > 0) => END

ERRID() Function

FUNCTION ERRID() returns the error code of the latest script internal error.

VERSIONS 4.0 and above

FORMAT

N% = ERRID()

REMARKS

Return value of ERRID() is the error code of the latest internal error. (See appendix for a list of all error code.) A return value of 0 means there is no error.

Note that any successful execution of a statement or function will clear the error code return by this function. Be sure to place this function right next to the statement or function where error is expected to get its error code.

EXAMPLE

N% = ERRID() // N% = 0~37

5-19

SmartScript User Manual Chapter 5

ERRORTAG Statement

FUNCTION ERRORTAG can specify a Tag name. When the SmartScript end abnormally, the error code and error message will be set to the valu and message field of the Tag.

VERSIONS 4.0.1.1 and above

FORMAT

ERRORTAG string- expression

REMARKS

string- expressio is a string expression which is a valid Tag name.

If the Tag specified by the tag name string-expression does not exist, it will be created automatically at runtime. The tag name string-expression should comply with the naming rule of Lab-LINK Tag.

When the script with ERRORTAG statement ends abnormally, the value of the error tag will indicate the error code while its message will be the name of the script file, the error line number and the error message.

If the statement has been used more than once in a SmartScript, only the last executed one will tak effect.

If more than one SmartScript are executed at Lab-LINK runtime, it is recommended to define different error tag name for each script to help distinguish in which script an error occurs.

EXAMPLE

ERRORTAG=

”ETag”

A=1/10

// Etag is pecified as the error tag

Store the sript above is stored as a script file named

“CSLPRG.csl”. After it is executed and ended abnormally due to the error of divided by zero occurs, the value of ETag will be set to 18 and its message will be

“ERROR 18: Division by Zero!! @

CSLPRG1.csl Line: 2

“.

5-20

SmartScript User Manual Chapter 5

EXEC Statement

FUNCTION EXEC opens a specified executable file or document file.

VERSIONS 1.0 and above

FORMAT

EXEC file-name, parameter, show-mode

REMARKS

file-name

parameter must be a string expression that specifies the file to open or the folder to open or explore. The statement can open an executable file or a document file. must be a string expression that specifies parameters to be passed to the application (if file-name specifies an executable file). If file-name specifies a document file, parameter should be an empty string.

show-mode specifies how the application is to be shown when it is opened.

This parameter can be one of the following values:

"MIN"

"MAX"

"HIDE"

"ICON"

"NORMAL"

EXAMPLE

1. To run Notepad:

EXEC “NOTEPAD.EXE”, “”, “NORMAL”

Minimizes the specified window and activates the next top-level window in the Z order.

Maximizes the specified window.

Hides the window and activates another window.

Displays the window as a minimized window. The active window remains active.

Activates the window and displays it in its current size and position.

2. To run DBSaver

EXEC " DBSAVER.EXE","PROJ1 WKS1","NORMAL"

3. To run Report

EXEC " REPORT.EXE","..\\Project\\Proj1\\cfg\\Wks1\\report.cat","NORMAL"

5-21

SmartScript User Manual Chapter 5

EXIT Statement

FUNCTION EXIT terminates the smallest enclosing FOR or WHILE statement in which it appears.

VERSIONS 1.0 and above

FORMAT

EXIT

REMARKS

For more information, see FOR … LOOP, WHILE … LOOP and CONTINUE statements.

EXAMPLE

FOR N%=0 TO 10

...

IF (A$ == “QUIT”) => EXIT

...

LOOP

EXP() Function

FUNCTION EXP returns the exponential of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = EXP(numeric-expression)

REMARKS

numeric-expression may be any numeric expression

This function is equivalent to the algebraic expression

y

e x

EXAMPLE

Y = EXP(1) // Y will be 2.718282

5-22

SmartScript User Manual Chapter 5

FAC() Function

FUNCTION FAC returns the factorial of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = FAC(numeric-expression)

REMARKS

numeric-expression must be an integer expression.

This function is equivalent to the algebraic expression

y

x

!

.

EXAMPLE

Y = FAC(5) // Y will be 120

FCHECK() Function

FUNCTION FCHECK determines whether or not the specified file number is valid.

VERSIONS 1.0 and above

FORMAT

N% = FCHECK(file-number)

REMARKS

file-number is an integer expression, which evaluates to a file number.

If the file associated with the specified file number was successful opened, it returns true (one); otherwise it returns false (zero).

EXAMPLE

OPEN 1, “TEST.TXT”

IF (! FCHECK(1)) => GOTO Error:

5-23

SmartScript User Manual Chapter 5

FILE$() Function

FUNCTION FILE$() return the content of the specified file as a string.

VERSIONS 4.0 and above

FORMAT

M$ = FILE$(filename)

REMARKS

Filename is a string expression representing the path of the file to be All characters, including control character such as line-feed, will be stored into a string. is an integer expression, which evaluates to a file number. file-number

If the file associated with the specified file number was successful opened, it returns true (one); otherwise it returns false (zero).

EXAMPLE

M

$ = FILE$(“C:\\PROJ1\\Log.txt”)

FLEN() Function

FUNCTION FLEN returns the length of the specified file.

VERSIONS 1.0 and above

FORMAT

N% = FLEN(file-number)

REMARKS

file-number is an integer expression, which evaluates to a file number.

If the file associated with the specified file number was successful opened, it returns the length of the file. If the file is a communications file, this function returns the number of characters in the receive-queue.

EXAMPLE

OPEN 1, “TEST.TXT”

N% = FLEN(1)

CLOSE 1

5-24

SmartScript User Manual Chapter 5

FMBCD () Function

FUNCTION FMBCD decodes the argument as a BCD number and returns its value as an integer.

VERSIONS 2.0 and above

FORMAT

N% = FMBCD(numeric-expression)

REMARKS

numeric-expression is an integer expression in BCD encoding.

This function is used to decode a BCD number, such as a number read from a PLC register, and convert it into an integer for SCADA usage.

EXAMPLE

Y = FMBCD(0x9876) // Y will be 9876

FMDBL () Function

FUNCTION FMDBL combines four arguments as a 4 word data and convert it to a double precision floating number.

VERSIONS 2.0 and above

FORMAT

Y = FMDBL(num-expression1, num-expression2, num-expression3,num-expression4)

REMARKS

num-expression1

num-expression2 is a integer expression representing the first word of a double precision floating number. is a integer expression representing the second word of a double precision floating number.

num-expression3

num-expression4 is a integer expression representing the third word of a double precision floating number. is a integer expression representing the fourth word of a double precision floating number.

This function is used to convert 4 word data into a double precision floating number.

EXAMPLE

Y = FMDBL((0x0000, 0x0000, 0x8000,0x4024) ) // Y will be 10.25

5-25

SmartScript User Manual Chapter 5

FMFLT () Function

FUNCTION FMFLT combines its two arguments as two word data and return its value as a single precision floating number.

VERSIONS 2.0 and above

FORMAT

Y = FMFLT(numeric-expression1, numeric-expression2)

REMARKS

numeric-expression1 is a integer expression representing the lower word of a single precision floating number.

numeric-expression2 is a integer expression representing the higher word of a single precision floating number.

This function is used to convert 2 word data into a single precision floating number.

EXAMPLE

Y = FMFLT(0x0000, 0x4124) // Y will be 10.25

5-26

SmartScript User Manual Chapter 5

FOR … LOOP Statement

FUNCTION FOR performs a series of instructions in a loop a given number of times.

VERSIONS 1.0 and above

FORMAT

FOR variable = init-expression TO final-expression [STEP inc-expression]

LOOP

REMARKS

variable

init-expression is a variable to be used as a counter. is a numeric expression, which is the initial value of the counter. is a numeric expression, which is the final value of the counter final-expression

inc-expression is a numeric expression to be used as an increment. (The default value is 1.)

If the value of the counter is less than or equal to the value of final-expression then Control

Script Module continues with the statement following the FOR statement.

The program statements following the FOR are executed until the LOOP statement is encountered. At this point the counter is incremented by the STEP value (inc-expression) and Control Script Module branches back to the FOR statement where the process begins again.

If the value of the counter is greater than the value of final-expression, then Control Script

Module branches to the statement following the LOOP statement.

If the value of inc-expression is negative, then the test is reversed. The counter is decreased each time through the loop, and the loop is executed until the counter is less than the final value.

Nested Loops

FOR … LOOP may be nested; that is, one FOR … LOOP may be placed inside another

FOR … LOOP. When loops are nested, each loop must have a unique variable name as its counter. Each LOOP will match the most recent FOR.

EXAMPLE

DIM A(3, 4)

FOR I = 1 TO 3

FOR J = 1 TO 4

A(I, J) = (I

– 1) * 4 + (J – 1)

5-27

SmartScript User Manual Chapter 5

LOOP

LOOP

Y = FMFLT(0x0000, 0x4124) // Y will be 10.25

5-28

SmartScript User Manual Chapter 5

Format$() Function

FUNCTION

Format

covert the integer argument into a string with the format specified by the format string argument.

VERSIONS 2.0 and above

FORMAT

N$ = FORMAT$(string-expression, numeric-expression)

REMARKS

string- expression is a string used to define the format needed. See description below for details.

numeric-expression can be any numeric expression.

Format string consists of the following fields while fields in square brackets are optional and can be omitted:

%[ flags ] [ width ] [. precision ] type

Each field in the format string is either a single character or a number and is used to specify a format option. The simplest form of format string contains only a percent symbol % and a

type character for data type. Ex. %d. The optional fields before the type character are used to control other format feature.

type

type character is the only mandatory field in format string. It must appear after any other format character. type character specify the data type of the numeric argument. It can be one of the following characters:

Char Data type

d Int (integer)

x

X

e

i

o

u

E

Int (integer)

Int (integer)

Int (integer)

Int (integer)

Int (integer)

Double

(double precision

floating number)

Double

(double precision

Output format

Decimal signed integer

Decimal signed integer

Octal signed integer

Decimal unsigned integer

Hexadecimal unsigned integer using

“abcdef”

Hexadecimal unsigned integer using

“ABCDEF”

Signed floating number in the format of [

– ]d.dddd e

[sign]ddd where d indicate a single digit decimal number and dddd is a single or multiple digits decimal number. ddd is a number with exact three digit of decimal number and sign can be either + or

–.

Same as e except that capital letter E replaces the lower case letter e for exponential expression.

5-29

SmartScript User Manual Chapter 5

f

g

G

floating number)

Double

(double precision

floating number)

Double

(double precision

floating number)

Double

(double precision

floating number)

Signed floating number in the format of

[

– ]dddd.dddd where dddd is a single or multiple digits decimal number. The number of digits before the decimal point depends on the value of the number and the number of digits after the decimal point depends on the precision needed.

Signed floating number using f or e format. The format actually used depends on which format produce a shorter string. Extra trailing 0 will be trimmed. Decimal point appears only when necessary.

Same as format g except that capital letter E replaces the lower case letter e for exponential expression.

flags

flag character is the first optional field in format string. flag is a single character used to specify alignment of sign, space, decimal point, and prefix of octal or hexadecimal number.

Format string can contain one or more flag characters.

+

flag

0

Space

(' ')

#

Meaning Default

Align the output to left within the specified width Align to right

If the output of signed data type, add positive/negative sign (+ or number

–) prior to the output

Only negative (

–) sign is shown 只在

負數前顯示負號.

If 0 flag appear before width setting, add leading

0 before the number to make up the minimum width. If 0 flag and

flag are set at the same time,

0 flag will be ignored. If 0 flag is used with integer

type (i, u, x, X, o, d), 0 flag will be ignored.

No leading 0.

Add leading space before the number to make up the minimum width if the output it a signed positive number. If Space flag and + flag are used at the same time, Space flag will be ignored.

No leading space

When used with o, x or X type, # flag add 0、0x or

0X prefix before the number depending on the

type.

When used with e, E or f type, the output value will always contain the decimal point.

When used with g or G type, the output value will always contain the decimal point and the extra trailing 0 after the number will not be removed

The flag is ignored if used with d, I or u types.

No prefix

Decimal point appears only when there are fractional digits.

Decimal point appears only when there are fractional digits. All trailing 0 will be removed.

5-30

SmartScript User Manual Chapter 5

width

width is the second optional field in format string. width is a non-negative decimal integer. It is used to control the minimum number of characters in the output. If the output number contain less characters than the specified width, space characters will be added before or after the number based on the existence of

flag (which means aligning to left) to make up the specified minimum width. If 0 flag is added before width, trailing 0 will be used to make up the width. 0 flag is ignore if left alignment is set.

width setting will not remove any number characters. If the number of characters of the output is greater than the specified width, the width setting will be ignored and all characters will be output. (The actual number of output characters may still be controlled by the

precision setting)

precision

precision is the third optional field in the format string. It is a non-negative decimal integer with a period symbol (.) as prefix. It is used to specify number of characters, number of fraction digits and number of significant digits. (See table below). This setting differs from the width setting because it will remove some of the output characters and will round up some digits if the output is a floating point number. If precision is set to 0 and the output number is also 0, no character will be output.

Y$ = FORMAT$("%.0d", 0) // Y contains no character

Type setting determines how precision will be interpreted and the default if precision is not used. See the table below:

type Meaning Default

d, i, u, o, x, X Precision specify the minimum number of output digits. If the input argument has fewer digits, leading 0 is added to the left of the output number. If the input number has more digits than

precision, the extra digits will not be removed.

e, E

Default precision is 1.

Precision specify the number of fraction digits, the number of digits after the decimal point. The extra digits will be round up.

Default precision is 6. If precision is 0 or there is no number after the period in precision setting, neither decimal point nor any fraction digits will be output.

f Precision specify the number of digits after the decimal point. At least one digit will appear before the decimal point and the number will be rounded up based on the

Default precision is 6. If precision is 0 or there is no number after the period in precision setting, neither decimal point nor any

5-31

SmartScript User Manual Chapter 5

g, G precision specified.

Precision specify the maximum number of significant digits. fraction digits will be output.

6 significant digits and all extra trailing 0 will be removed.

5-32

SmartScript User Manual Chapter 5

FPOS() Function

FUNCTION FPOS returns the current read-write pointer position of the specified file.

VERSIONS 1.0 and above

FORMAT

N% = FPOS(file-number)

REMARKS

file-number is an integer expression, which evaluates to a file number.

If the file associated with the specified file number was successful opened, it returns the current read-write pointer position of the file. If the file is a communications file, this function returns the number of characters in the transmit-queue.

EXAMPLE

OPEN 1, “TEST.TXT”

N% = FPOS(1)

CLOSE 1

// N% will be 0

FPRINT Statement

FUNCTION FPRINT writes data to the specified file.

VERSIONS 1.0 and above

FORMAT

FPRINT file-number, expression

, …, expression

REMARKS

file-number

expression is an integer expression, which evaluates to a file number. may be any numeric or string expression that will be written to the file.

All numeric value will be converted to ASCII string by free format then written to the file.

Expressions should be delimited by commas, and no extra blanks will be inserted between expressions.

EXAMPLE

A = PI

CREATE 1, “TEST.TXT”

FPRINT 1, “A = “, A, “\r\n”

CLOSE 1

5-33

SmartScript User Manual Chapter 5

GOSUB Statement

FUNCTION GOSUB branches to the specified subroutine.

VERSIONS 1.0 and above

FORMAT

GOSUB line-label

REMARKS

line-label is the first line of the subroutine.

A subroutine must be end with a RETURN statement, and cause Control Script Module to branch back to the statement following the most recent GOSUB statement. A subroutine may be called any number of times in a program, and a subroutine may be called from within another subroutine. Such nesting of subroutines is limited only by available memory.

Subroutines may appear anywhere in the program, but it is recommended that the subroutine be readily distinguishable from the main program. To prevent inadvertent entry into the subroutine, it may be preceded by a STOP, END or GOTO statement that directs program control around the subroutine.

EXAMPLE

GOSUB ShowMsg:

MESSAGE "Test Program", "In main program"

END

ShowMsg:

MESSAGE "Test Program", "In subroutine"

RETURN

5-34

SmartScript User Manual Chapter 5

GOTO Statement

FUNCTION GOTO branches unconditionally out of the normal program sequence to a specified line label..

VERSIONS 1.0 and above

FORMAT

GOTO line-label

REMARKS

line-label is a valid line label in the program.

If line label is an executable statement, that statement and those following are executed. If it is a non-executable statement, execution proceeds at the first executable statement encountered after line label.

EXAMPLE

GOTO ErrHandle:

HOUR() Function

FUNCTION HOUR returns the current hours after midnight.

VERSIONS 1.0 and above

FORMAT

N% = HOUR()

REMARKS

This function returns the current hours after midnight (0 ~ 23).

EXAMPLE

N% = HOUR()

5-35

SmartScript User Manual Chapter 5

IDLE Statement

FUNCTION IDLE suspend the execution of the script but can still handle event.

VERSIONS 4.0 and above

FORMAT

IDLE

REMARKS

IDLE statement is usually used to wait for events to occur. It is similar to running an empty loop (Ex.

WHILE(1)……..LOOP), but unlike a loop, it will not consume system resource during the waiting.

EXAMPLE

IDLE

{EVENT}:

{Value} = {Value} + 1

RETURN

//{Value} will increase by 1 when {EVENT} changes

5-36

SmartScript User Manual Chapter 5

IF … ELSEIF … ELSE … ENDIF Statement

FUNCTION IF makes a decision regarding program flow based on the result of an expression.

VERSIONS 1.0 and above

FORMAT

IF (cond-expression) => statement

IF (cond-expression)

...

[ELSEIF (cond-expression)]

...

[ELSE]

...

ENDIF

REMARKS

statement

cond-expression may be any statement. may be any expression.

If the result of the cond-expression is true (nonzero), the statement following the “then symbol” or statements following the IF is executed. If the result is false (zero), the statements following the IF are ignored and the statement ELSEIF, if present, is executed.

As the IF statement, If the result of the cond-expression is true, the statements following the

ELSEIF is executed. Otherwise, the next ELSEIF, if present, is executed, and so on. Finally, if no one of the ELSEIF is true, the statements following the ELSE, if present, is executed. If no ELSE present, the statement following the ENDIF is executed.

IF … ENDIF statements may be nested. Each ENDIF will match the most recent IF.

EXAMPLE

IF ((A >= 0) & (A <= 10))

M$ = “OK”

ELSEIF (A > 10)

M$ = “> 10”

ELSE

M$ = “< 0”

ENDIF

5-37

SmartScript User Manual Chapter 5

INT() Function

FUNCTION INT returns the truncated integer part of the specified value.

VERSIONS 1.0 and above

FORMAT

N% = INT(numeric-expression)

REMARKS

numeric-expression

EXAMPLE

N% = INT(99.9)

N% = INT(-4.8) is any numeric expression

// N% will be 99

// N% will be -4

ISTR$() Function

FUNCTION ISTR$ converts a value to a string by the specified notation.

VERSIONS 1.0 and above

FORMAT

M$ = ISTR$(numeric-expression

radix-expression)

REMARKS

numeric- expression

radix-expression

may be any numeric expression. is an integer expression, which evaluates to a valid base of value. The valid base is 2 to 36.

This function converts the result of numeric_expression to an unsigned long integer, and then converts it to a string by the specified notation.

EXAMPLE

M$ = ISTR$(15, 2)

// M$ will be “1111”

5-38

SmartScript User Manual Chapter 5

IVAL() Function

FUNCTION IVAL converts a string to a value by the specified notation.

VERSIONS 1.0 and above

FORMAT

Y = IVAL(string-expression

radix-expression)

REMARKS

string-expression

radix-expression

may be any string expression. is an integer expression, which evaluates to a valid base of value. The valid base is 2 to 36.

This function converts the result of string_expression to an integer by the specified notation.

IVAL returns 0 if no conversion can be performed.

EXAMPLE

A = IVAL(“FFFF”,16)

// A will be 65535

LEFT$() Function

FUNCTION LEFT$ returns a string comprised of the leftmost N characters of the specified string.

VERSIONS 1.0 and above

FORMAT

M$ = LEFT$(string-expression, count-expression)

REMARKS

string-expression

count-expression

may be any string expression. is an integer expression, which evaluates to a valid count value.

The valid count value is 0 to maximum length of the string.

EXAMPLE

M$ = LEFT$(“ABCDEFG”, 3) // M$ will be “ABC”

5-39

SmartScript User Manual Chapter 5

LEN() Function

FUNCTION LEN returns the number of characters in the specified string.

VERSIONS 1.0 and above

FORMAT

N% = LEN(string-expression)

REMARKS

string-expression

EXAMPLE

N% = LEN(“ABCDEFG”) may be any string expression.

// N% will be 7

LN() Function

FUNCTION LN returns the natural logarithm of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = LN(numeric-expression)

REMARKS

numeric-expression is a numeric expression and must be greater than zero.

This function is equivalent to the algebraic expression

y

 ln

x

 log

e x

. The natural logarithm is the logarithm to the base e.

EXAMPLE

Y = LN(2) // Y will be 0.693147

5-40

SmartScript User Manual Chapter 5

LOG() Function

FUNCTION LOG returns the logarithm of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = LOG(numeric-expression)

REMARKS

numeric-expression is a numeric expression and must be greater than zero.

This function is equivalent to the algebraic expression

y

 log

x

 log

10

x

. The logarithm is the logarithm to the base 10.

EXAMPLE

Y = LOG(10) // Y will be 1

LOWER$() Function

FUNCTION LOWER$ returns a string same as the specified string but all characters were converted to lowercase.

VERSIONS 1.0 and above

FORMAT

M$ = LOWER$(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

M$ = LOWER$("ABCDefg")

// M$ will be “abcdefg”

5-41

SmartScript User Manual Chapter 5

LTRIM$() Function

FUNCTION LTRIM$ returns a string same as the specified string but without the leading space.

VERSIONS 1.0 and above

FORMAT

M$ = LTRIM$(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

M$ = LTRIM$(" ABCDEFG")

// M$ will be “ABCDEFG”

MAX() Function

FUNCTION

MAX compares two values and returns the larger one.

VERSIONS

1.0 and above

FORMAT

Y = MAX(numeric-expression, numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

EXAMPLE

Y = MAX(2.15, 4.3) // Y will be 4.3

5-42

SmartScript User Manual Chapter 5

MD Statement

FUNCTION MD is used to create a new folder.

VERSIONS

4.0 and above

FORMAT

MD directory-name

REMARKS

directory-name

is a string expression representing the path of the new folder to be created.

directory-name can contain subfolders. If any intermediate subfolders do not exist, MD statement will create them automatically.

MD may fail to create the specify folder due to file access privilege setting. Such failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

EXAMPLE

MD “C:\\NewFolder”

MESSAGE Statement

FUNCTION MESSAGE displays a message box.

VERSIONS 1.0 and above

FORMAT

MESSAGE title-expression, text-expression

REMARKS

title-expression

text-expression is a string expression containing the message to be displayed. is a string expression used for the message box title.

The message box contains an application-defined title and message, plus an icon consisting of a lowercase letter i in a circle-combination and one push buttons: OK.

Windows does not automatically break the lines to fit in the message box, however, so the message string must contain carriage returns to break the lines at the appropriate places.

EXAMPLE

MESSAGE “Test Program”, “This is line 1\nThis is line 2”

5-43

SmartScript User Manual Chapter 5

MID$() Function

FUNCTION MID$ returns the requested part of the specified string.

VERSIONS 1.0 and above

FORMAT

M$ = MID$(string-expression, index-expression, count-expression)

REMARKS

string-expression may be any string expression.

index-expression

is an integer expression, which evaluates to a valid index value. The valid index value is 1 to maximum length of the string.

count-expression

is an integer expression, which evaluates to a valid count value. The valid count value is 0 to maximum length of the string.

EXAMPLE

M$ = MID$(“ABCDEFG”, 3, 2)

// M$ will b e “CD”

MIN() Function

FUNCTION MIN compares two values and returns the smaller one.

VERSIONS 1.0 and above

FORMAT

Y = MIN(numeric-expression, numeric-expression)

REMARKS

numeric-expression may be any numeric expression..

EXAMPLE

Y = MIN(2.15, 4.3) // Y will be 2.15

5-44

SmartScript User Manual Chapter 5

MINUTE() Function

FUNCTION MINUTE returns the current minutes after hour.

VERSIONS 1.0 and above

FORMAT

N% = MINUTE()

REMARKS

This function returns the current minutes after hour (0 ~ 59).

EXAMPLE

N% = MINUTE()

MONTH() Function

FUNCTION MONTH returns the current month.

VERSIONS 1.0 and above

FORMAT

N% = MONTH()

REMARKS

This function returns the current month (1 ~ 12).

EXAMPLE

N% = MONTH()

5-45

SmartScript User Manual Chapter 5

MOVE Statement

FUNCTION

MOVE is used to move a file or a folder.

VERSIONS

4.0 and above

FORMAT

MOVE source-path,target-path

REMARKS

EXAMPLE

source-path

is a string expression representing the path of the source file or folder.

target-path

is a string expression representing the path of the target file or folder.

When moving a file or a folder, MOVE may fail due to the source file or folder doesn’t exist, the target path doesn

’t exist or any other reason. Such failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

MOVE will fail if the target file exists. Note that this is different from the result of COPY statement which will overwrite the existing target file automatically.

MOVE “C:\\Folder1\\Log1.txt”,” C:\\ Folder1\\Log2.txt”

5-46

SmartScript User Manual Chapter 5

MSGBOARD Statement

FUNCTION MSGBOARD opens an “Important Message” window and displays a line of message.

VERSIONS 4.0 and above

FORMAT

MSG text-expression

REMARKS

text-expression is a string expression used for the message to be displayed.

Executing this statement will open an

Import Message” window to display the specified message string. Date, time and a [CslMan32] label will be added to the message automatically. After the message is shown, SmartScript will not wait for user to close the window before executing the following statements in the script. If the

Important Message” window is already opened when the statement is executed, the message will be added below those messages already shown in the window.

There are two buttons at the bottom of the

Important Message” window. If “Save & Close” button is pressed, the system save all the messages in the window to the text file

“MsgBoard.log” in the system folder (default path is c:\lablink\system4), clear the messages and close the window; if

“Close button” is pressed, the system will clear all messages and close the window immediately.

Each execution of the statement will add one and only one line of message, <Carriage

Return> and <Line Feed> character in the message string will be trimmed.

EXAMPLE

MSGBOARD

“This is a test message”

5-47

SmartScript User Manual Chapter 5

NERR() Function

FUNCTION NERR() returns the accumulated error count.

VERSIONS 4.0 and above

FORMAT

N% = NERR()

REMARKS

NERR() returns the accumulated error count. Whenever a statement or a function cause an internal error, the error count will be incremented by 1. RSTERR statement can clear the error count.

EXAMPLE

N% = NERR() //N% is a non-negative integer

NOW() Function

FUNCTION NOW() returns the current system date/time represented as a real number.

VERSIONS 4.0.0.10 and above

FORMAT

N% = NOW()

REMARKS

NOW() return the current system date/time. The date/time will be represented as a real number. Its integer part represents the date field of the TAG, and its fraction part represents the time field of the TAG. Both integer and fraction parts are of the same unit of days. The returned value of this function can be assign to a TAG variable to modify its date/time field.

EXAMPLE

{Tag1.t} = NOW() // The date/time filed of Tag1 are modifie as current system

// date/time.

5-48

SmartScript User Manual Chapter 5

NOW$() Function

FUNCTION NOW$() returns the current system date/time represented as a string.

VERSIONS 4.0.0.10 and above

FORMAT

M$ = NOW$()

REMARKS

NOW$() return the current system date/time. The date/time will be represented as a string.

The output string has the format of

yyyy/mm/dd hh:ii:ss.sss”, where yyyy is the four digits year part, mm is the two digits month part, dd is the two digits day part, hh is the two digits hour part, ii is the two digits minute part, integer part of ss.sss is the two digits second and its fraction part is the three digits millisecond part of a complete date.time notation. The length of the output string is fixed at 23 charcters.

EXAMPLE

M$ = NOW$() // M$ is the system, ex.

”2010/01/01 12:00.00.000”

5-49

SmartScript User Manual Chapter 5

OPEN Statement

FUNCTION OPEN opens the specified file.

VERSIONS 1.0 and above

FORMAT

OPEN file-number, file-name, access-type

REMARKS

file-number is an integer expression, which evaluates to a valid file number. The number is then associated with the file for as long as it is open and is used by other file I/O statements to refer to the file. The valid file numbers are 1 to 16. is a string expression, which names the file to be opened. file-name

access-type is a string expression that specifies the type of access to the file. This parameter can be one of the following values:

"R"

"W"

"RW"

Specifies read-only access to the file. Data can be read from the file.

Specifies write-only access to the file. Data can be write to the file.

Specifies read-and-write access to the file. Data can be read from and write to the file.

When the statement opens the file, the read-write pointer is set to the beginning of the file.

EXAMPLE

OPEN 1, “TEST.TXT”, “R”

5-50

SmartScript User Manual Chapter 5

PASS Statement

FUNCTION PASS is used to open an executable file or a document file. It is similar to EXEC, but will wait for the application used to open the specified file terminates before continuing the execution of the statements following this statement.

VERSIONS 4.0 and above

FORMAT

PASS

filename,parameter,showmode

REMARKS

file-name

parameter must be a string expression that specifies the file to open or the folder to open or explore. The statement can open an executable file or a document file. must be a string expression that specifies parameters to be passed to the application (if file-name specifies an executable file). If file-name specifies a document file, parameter should be an empty string.

show-mode specifies how the application is to be shown when it is opened. This parameter can be one of the following values:

EXAMPLE

"MIN"

"MAX"

"HIDE"

Minimizes the specified window and activates the next top-level window in the Z order.

Maximizes the specified window.

Hides the window and activates another window.

"ICON" Displays the window as a minimized window. The active window remains active.

"NORMAL" Activates the window and displays it in its current size and position.

PASS "NOTEPAD.EXE”,“”, “NORMAL”

MESSAGE “”,”NOTEPAD CLOSED”

The PASS statement will run Notepad and the next statement MESSAGE will be executed after Notepad is closed.

5-51

SmartScript User Manual Chapter 5

PLAY Statement

FUNCTION PLAY plays a sound specified by the given filename.

VERSIONS 1.0 and above

FORMAT

PLAY file-name, play-mode

REMARKS

file-name

play-mode is a string expression, which names the wave file to be played. is a string expression that specifies the mode of play to the wave file.

This parameter can be one of the following values:

""

"LOOP"

"NOSTOP"

Attempts to stop the currently playing sound and plays the specified sound.

Attempts to stop the currently playing sound and plays the specified sound repeatedly.

Plays the specified sound but doesn’t attempt to stop the currently playing sound. If a sound cannot be played because the resource needed to generate that sound is busy playing another sound, the statement immediately return and without playing the requested sound.

The sound is played asynchronously and PLAY returns immediately after beginning the sound. To terminate an asynchronously played waveform sound, call PLAY with file-name set to empty string.

The sound specified by file-name must fit into available physical memory and be playable by an installed waveform-audio device driver.parameter must be a string expression that specifies parameters to be passed to the application (if file-name specifies an executable file). If file-name specifies a document file, parameter should be an empty string.

EXAMPLE

PLAY “Siren-01.wav”, “LOOP”

5-52

SmartScript User Manual Chapter 5

RAND() Function

FUNCTION RAND returns a random number.

VERSIONS 1.0 and above

FORMAT

Y = RAND(numeric-expression)

REMARKS

file-name

numeric-expression is a string expression, which names the wave file to be played. may be any numeric expression.

This function returns a random number between 0 and the result of numeric-expression.

The random number generator is auto re-seeded, so the different sequence of random numbers is generated each time the program is run.

EXAMPLE

Y = RAND(5.5)

RD Statement

FUNCTION RD is used to delete an empty folder.

VERSIONS 4.0 and above

FORMAT

RD directory-name

REMARKS

directory-name

is a string expression representing the path of the folder to be deleted.

RD statement may fail if the specified folder does not exits or is not empty. Such failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

EXAMPLE

RD “C:\\EmptyFolder”

5-53

SmartScript User Manual Chapter 5

READ Statement

FUNCTION READ reads data from the specified file.

VERSIONS 1.0 and above

FORMAT

READ file-number, string-variable, count-expression

REMARKS

file-number

string-variable is an integer expression, which evaluates to a file number. is a string variable that receives the data read from the file.

count-expression

is an integer expression, which evaluates to a count value. The count value specifies the number of bytes to be read from the file.

If the file associated with the specified file number was successful opened, this statement reads data from the file. If the file is a communications file, this statement reads data from the receive-queue.

EXAMPLE

READ 1, A$, 80

5-54

SmartScript User Manual Chapter 5

RETURN Statement

FUNCTION RETURN returns from a subroutine.

VERSIONS 1.0 and above

FORMAT

RETURN

REMARKS

The RETURN statement(s) in a subroutine cause SmartScript Module to branch back to the statement following the most recent GOSUB statement. A subroutine may contain more thane one RETURN statement, should logic-dictate a return at different points in the subroutine. Subroutines may appear anywhere in the program, but it is recommended that the subroutine be readily distinguishable from the main program. To prevent inadvertent entry into the subroutine, it may be preceded by a STOP, END or GOTO statement that directs program control around the subroutine.

EXAMPLE

GOSUB ShowMsg:

MESSAGE "Test Program", "In main program"

END

ShowMsg:

MESSAGE "Test Program", "In subroutine"

RETURN

RIGHT$() Function

FUNCTION RIGHT$ returns a string comprised of the rightmost N characters of the specified string.

VERSIONS 1.0 and above

FORMAT

M$ = RIGHT$(string-expression, count-expression)

REMARKS

string-expression

count-expression

may be any string expression. is an integer expression, which evaluates to a valid count value.

The valid count value is 0 to maximum length of the string..

EXAMPLE

M$ = RIGHT$(“ABCDEFG”, 4) // M$ will be “DEFG”END

5-55

SmartScript User Manual Chapter 5

RSTERR Statement

FUNCTION RSTERR is used to reset the internal error counter of SmartScript module.

VERSIONS 4.0 and above

FORMAT

RSTERR

REMARKS

SmartScript has a counter to count the number of internal error occurs. Whenever a statement or a function cause an internal error, the counter will be incremented by 1 and

NERR() can be used to return the error count. Execution of the statement RSTERR will reset the value of the counter to 0. After the execution of this statement, NERR() will return 0.

EXAMPLE

RSTERR // NERR() = 0

RTRIM$() Function

FUNCTION RTRIM$ returns a string same as the specified string but without the trailing Space (ASCII code=32) and control characters including Tab (ASCII code=9), Carriage Return(ASCII code=13) and Line Feed (ASCII code=10).

VERSIONS 1.0 and above

FORMAT

M$ = RTRIM$(string-expression)

REMARKS

EXAMPLE

string-expression may be any string expression.

M$ = RTRIM$("ABCDEFG ")

// M$ will be “ABCDEFG”

SECOND() Function

FUNCTION SECOND returns the current seconds after minute.

VERSIONS 1.0 and above

FORMAT

N% = SECOND()

REMARKS

This function returns the current seconds after minute (0 ~ 59).

EXAMPLE

N% = SECOND()

5-56

SmartScript User Manual Chapter 5

SEEK Statement

FUNCTION SEEK moves the read-write pointer of the specified file.

VERSIONS 1.0 and above

FORMAT

SEEK file-number, count-expression, seek-mode

REMARKS

file-number

count-expression

is an integer expression, which evaluates to a file number. is an integer expression, which evaluates to a count value. The count value specifies the number of bytes the read-write pointer is to be moved.

seek-mode specifies the starting position and direction of the read-write pointer. This parameter can be one of the following values:

"B"

"C"

"E"

Moves the read-write pointer

count-expression bytes from the beginning of the file.

Moves the read-write pointer

count-expression bytes from its current position.

Moves the read-write pointer

count-expression bytes from the end of the file.

If the file associated with the specified file number was successful opened, it moves the read-write pointer of the file to the specified position. If the file is a communications file, this statement flushes all characters from the receive-queue (seek-mode

= “C”), transmit-queue

(seek-mode

= “B”) or both (seek-mode = “E”).

When a file is initially opened, the read-write pointer is set to the beginning of the file. SEEK moves the pointer an arbitrary amount without reading data, which facilitates random access to the file's contents.

EXAMPLE

SEEK 1, 0, “E”

5-57

SmartScript User Manual Chapter 5

SETDIR Statement

FUNCTION SETDIR can set the path of Reference Path (~0,…,~19) during Lab-LINK runtime

VERSIONS 1.1 and above

FORMAT

SETDIR numeric-expression, string-expression

REMARKS

numeric - expression

string - expression is a numeric expression with value between 0 and 19. It is used to specify which reference path will be defined. is a string expression representing a valid path of a folder. This path is used to define the specified reference path.

Reference Path is a shorthand notation of file path used by Lab-LINK objects. Please see

Appendix of SmartPanel Manual for details.

SETDIR can define or redefine the actual path of the specified Reference Path at Lab-LINK runtime. Note that the reference path used by some of the Lab-LINK modules are loaded when Lab-LINK starts and modification of these reference paths at later time will have no effect to these modules. For example, the Data module use reference path ~6 as its default data path and will load the definition of ~6 when Lab-LINK starts. Any change on the reference path ~6 after Lab-LINK starts will not change the path of data files.

EXAMPLE

// Set reference path ~8 to ..\project\proj1\dat\01

SETDIR 8, "..\\PROJECT\\PROJ1\\DAT\\

01”

5-58

SmartScript User Manual Chapter 5

SHORTCUT Statement

FUNCTION

SHORTCUT is used to create a shortcut for an application or a document file.

VERSIONS

4.0 and above

FORMAT

EXAMPLE

SHORTCUT link-file,filename,parameter,work-directory

REMARKS

link-file

filename

parameter

work-directory is a string expression representing the file name of the shortcut. is a string expression representing the file name of the application or the document file of the shortcut. The file name should include complete path designation

Any parameter required by the application or the document file.

Specify the working directory of the specified application or document.

Shortcut statement may fail if it contains invalid path. Such failure will be counted as an internal error but the script will continue its execution. ERRID() function can be used to get the error code.

If the shortcut file specified by link-file already exists, SHORTCUT statement will create a new shortcut to replace the old one.

SHORTCUT statement does not check for correctness of filename

parameter and

work-directory. Therefore, it is possible that SHORTCUT statement has successfully created the shortcut but the shortcut cannot be executed correctly. Developers are responsible to verify the validity of these arguments.

SHORTCUT

“Test.lnk”,”DBSaver.exe”,”PROJ1 WKS1”,” C:\\LabLink\\System4\\”

5-59

SmartScript User Manual Chapter 5

SHUTDOWN Statement

FUNCTION SHUTDOWN can end the execution of Lab-LINK.

VERSIONS 4.0 and above

FORMAT

SHUTDOWN

REMARKS

This command is used to end the execution of Lab-LINK system. Although there is a system tag named $EXIT can end the execution by setting its value to 1, it is not recommended. It is possible that some Lab-LINK modules may not be terminated when setting $EXIT to 1 in

Smart Script. Thereful, it is recommended to use this statement to end Lab-LINK in Smart

Script.

EXAMPLE

// End Lab-LINK

SHUTDOWN

5-60

SmartScript User Manual Chapter 5

SIN() Function

FUNCTION SIN returns the sine of the specified angle.

VERSIONS 1.0 and above

FORMAT

Y = SIN(numeric-expression)

REMARKS

numeric-expression must be an angle expressed in radians

This function is equivalent to the algebraic expression

y

 sin(x )

. To convert from degrees to radians, multiply degrees by (PI / 180).

EXAMPLE

Y = SIN(90 * (PI / 180)) // Y will be 1

SINH() Function

FUNCTION SINH returns the hyperbolic sine of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = SINH(numeric-expression)

REMARKS

numeric-expression must be an angle expressed in radians

This function is equivalent to the algebraic expression

y

 sinh(x )

.

EXAMPLE

Y = SINH(1) // Y will be 1.175201

5-61

SmartScript User Manual Chapter 5

SLEEP Statement

FUNCTION SLEEP is used to suspend the execution of the script for a specified period of time.

VERSIONS 4.0 and above

FORMAT

SLEEP numeric expression

REMARKS

numeric expression is a numeric expression. It must be greater than 0 and its unit is second.

EXAMPLE

SLEEP 1.5 // Suspend the script for 1.5 seconds.

SQRT() Function

FUNCTION SQRT returns the square root of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = SQRT(numeric-expression)

REMARKS

numeric-expression is a numeric expression and must be greater than or equal to zero.

This function is equivalent to the algebraic expression

y

x

EXAMPLE

Y = SQRT(2) // Y will be 1.414214

STOP Statement

FUNCTION STOP terminates program execution and closes all files.

VERSIONS 1.0 and above

FORMAT

STOP

REMARKS

STOP statements may be placed anywhere in the program to terminate execution.

EXAMPLE

IF (A > 0) => STOP

5-62

SmartScript User Manual Chapter 5

STR$() Function

FUNCTION STR$ returns a string representation of the specified value.

VERSIONS 2.0 and above

FORMAT

M$ = STR$(numeric-expression)

REMARKS

numeric-expression

EXAMPLE

M$ = STR$(5.3124) may be any numeric expression.

// M$ will be “5.3124”

STRING$() Function

FUNCTION STRING$ returns a string formed by repeating the specified character a specified number of times.

VERSIONS 1.0 and above

FORMAT

M$ = STRING$(string-expression, count-expression)

REMARKS

string-expression count-expression

EXAMPLE

M$ = STRING$(“*”, 5) may be any string expression. The first character in the string expression will be repeated. is an integer expression, which evaluates to a count value. The count value specifies the number of times to be repeating.

// M$ will be “*****”

SUM08() Function

FUNCTION SUM08 returns the 8-bit checksum value of the specified string.

VERSIONS 1.0 and above

FORMAT

N% = SUM08(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

N% = SUM08(“\x02ABC\x03”)

// N% will be 203

5-63

SmartScript User Manual Chapter 5

SWITCH … CASE … DEFAULT … ENDSW Statement

FUNCTION

SWITCH evaluates expression and executes any statement associated with case-expression whose value matches the initial expression.

VERSIONS

1.0 and above

FORMAT

REMARKS

SWITCH (switch-expression)

[CASE case-expression]

...

[CASE case-expression]

...

[DEFAULT]

...

ENDSW

switch-expression

case-expression may be any numeric expression. may be any numeric expression.

The SWITCH and CASE keywords evaluate switch-expression and execute any statement associated with case-expression whose value matches the initial switch-expression.

If there is no match with a case-expression, the statement associated with the DEFAULT keyword is executed. If the DEFAULT keyword is not used, control passes to the statement following the ENDSW.

EXAMPLE

SWITCH (N%)

CASE 0

Y = SIN(X)

CASE 1

Y = COS(X)

DEFAULT

Y = 0.0

ENDSW

5-64

SmartScript User Manual Chapter 5

SYSINFO$() Function

FUNCTION SYSINFO() returns the specified system information.

VERSIONS 4.0 and above

FORMAT

S% = SYSINFO$( info-name)

REMARKS

EXAMPLE

info-name

S$ = SYSINFO$

T$ = SYSINFO$ a string expression which must be one of the following keyword used to specified the system information returned.

HOSTNAME

HOSTADDR return the computer name return the IP address. If there are more than one IP addresses associated with the computer, the retuened IP addresses will be separated with SPACE character.

(“HOSTNAME”)

(“HOSTADDR”)

// N% is

”COMPUTER1”

// N% is

”192.168.100.1”

5-65

SmartScript User Manual Chapter 5

TAG() Function

FUNCTION TAG returns the value or message of the specified Tag .

VERSIONS 1.1 and above

FORMAT

Y = TAG(string- expression) or

TAG(string- expression) = expression

REMARKS

string- expression

expression is a string expression which is a valid Tag name or Tag name with postfix

“.$”. may be any numeric or string expression. Its data type should be consistent with the tag field specified by the Tag name string-

expression.

If the Tag specified by tag name string-expression does not exist, it will be created automatically at runtime. The tag name string-expression should comply with the naming rule of Lab-LINK Tag. When the last two characters in string-expression are

“.$”, it indicates that the message field of the specified tag is used in this function. If the last two characters in string-expression are

“.t” or “.T”, it indicates that the date/time field of the specified tag is used in this function.

If the result of expression is a string, note that there is a length limit of 80 characters for the message field of a Tag.

When TAG function is placed on the right of the operator

“=” in a statement, it will returns the value or message of the specified tag. When TAG function is placed on the left of the operator

“=” in a statement, it will assign the result of the expression on the right to the value or message field of the specified tag.

EXAMPLE

TAG("Tag"+"1") = 3.9

TAG("Tag"+"1"+".$") = "OK"

{Tag2} = TAG("Tag1")

// Set the value of

“Tag1” to 3.9

// Set the message of

“Tag1” to OK

// Assign the value of

“Tag1” to “Tag2”

5-66

SmartScript User Manual Chapter 5

TAN() Function

FUNCTION TAN returns the tangent of the specified angle.

VERSIONS 1.0 and above

FORMAT

Y = TAN(numeric-expression)

REMARKS

numeric-expression must be an angle expressed in radians

This function is equivalent to the algebraic expression

y

 tan(x )

. To convert from degrees to radians, multiply degrees by (PI / 180).

EXAMPLE

Y = TAN(45 * (PI / 180)) // Y will be 1.0

TANH() Function

FUNCTION TANH returns the hyperbolic tangent of the specified value.

VERSIONS 1.0 and above

FORMAT

Y = TANH(numeric-expression)

REMARKS

numeric-expression may be any numeric expression.

This function is equivalent to the algebraic expression

y

 tanh(x )

.

EXAMPLE

Y = TANH(1) // Y will be 0.761594

5-67

SmartScript User Manual Chapter 5

TICK() Function

FUNCTION TICK returns the number of milliseconds that have elapsed since Windows was started.

VERSIONS 1.0 and above

FORMAT

Y = TICK()

REMARKS

The return value is the number of milliseconds that have elapsed since Windows was started. The elapsed time is stored as a 32-bit value, which means Windows can record no more than 2^32 millisecond intervals before the 32-bit value overflows to zero. This is approximately 49.7 days. If you use the elapsed time, check for the overflow condition when comparing times.

EXAMPLE

Y = TICK()

TIMER() Function

FUNCTION TIMER returns the current seconds after midnight.

VERSIONS 1.0 and above

FORMAT

N% = TIMER()

REMARKS

The return value is the number of seconds that have elapsed since midnight.

EXAMPLE

N% = TIMER()

5-68

SmartScript User Manual Chapter 5

TOKEN Statement

FUNCTION TOKEN removes the first token that delimited by the delimiters from the specified string.

VERSIONS 1.0 and above

FORMAT

TOKEN token-variable, source-variable, delimiters

REMARKS

token-variable

source-variable is a string variable that will receive the token. may be any string variable.

delimiters is a string expression which contains the list of delimiters.

This statement searches for the occurrence of any delimiter (specified by delimiters) in the source string, and breaks it to two separated strings. The first string assigns to the token-variable, and the second assigns back to the source-variable.

EXAMPLE

A$ = “Color = 255, 192, 128”

TOKEN M$, A$, “=“

// M$ will be "Color "

TOKEN M$, A$, “,”

TOKEN M$, A$, “,”

TOKEN M$, A$, “,”

// M$ will be " 255"

// M$ will be " 192"

// M$ will be " 128"

A$ will be " 255, 192, 128"

A$ will be " 192, 128"

A$ will be " 128"

A$ will be ""

5-69

SmartScript User Manual Chapter 5

TONE Statement

FUNCTION TONE generate a sound with specified frequency and length using the built-in buzzer of the

PC.

VERSIONS 4.0 and above

FORMAT

TONE frequency, duration

REMARKS

frequency duration

is a numeric expression specifying the frequency of the sound played. Its unit is Hz. is a numeric expression specifying the length of the sound played. Its unit is second.

Script will wait for the end of the sound playing before executing statements following TONE statement.

EXAMPLE

TONE 440,3 // Play a sound of frequency 440Hz for 3 seconds

TRAPOFF Statement

FUNCTION TRAPOFF disables the TAG events trapping.

VERSIONS 4.0 and above

FORMAT

TRAPOFF

REMARKS

This statement disables the TAG events trapping and all TAG events will be ignored.

After the execution of this statement, despite that all other new TAG event won

’t be executed, these new event will be stored in a TAG event queue and will be executed after

TRAPON statement is executed to restore TAG event handling. Since there is a limit on the capacity of the TAG event queue, it is suggested to keep the duration of TRAPOFF as short as possible. Otherwise, an out of stack error may occur if there are too many unexecuted

TAG events.

Refer to “Line Label” in chapter 1 for TAG event.

EXAMPLE

TRAPOFF

5-70

SmartScript User Manual Chapter 5

TRAPON Statement

FUNCTION TRAPON enables the TAG events trapping.

VERSIONS 4.0 and above

FORMAT

TRAPON

REMARKS

This statement enables the TAG events trapping and all TAG events will be processed.

Refer to “Line Label” in chapter 1.

EXAMPLE

TRAPON

UPPER$() Function

FUNCTION UPPER$ returns a string same as the specified string but all characters were converted to uppercase.

VERSIONS 1.0 and above

FORMAT

M$ = UPPER$(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

M$ = UPPER$("ABCDefg")

// M$ will be “ABCDEFG”

VAL() Function

FUNCTION VAL returns the numerical value of the specified string.

VERSIONS 1.0 and above

FORMAT

Y = VAL(string-expression)

REMARKS

string-expression may be any string expression

If the first characters of string-expression are not numeric, then VAL returns 0. VAL also strips leading blanks, tabs, carriage-returns and line-feeds from the specified string.

EXAMPLE

Y = VAL(" -3.84 ") // Y will be

–3.84

5-71

SmartScript User Manual Chapter 5

WEEKDAY() Function

FUNCTION WEEKDAY returns the current day of week.

VERSIONS 1.0 and above

FORMAT

N% = WEEKDAY()

REMARKS

This function returns the current day of week (0 ~ 6, Sunday = 0).

EXAMPLE

N% =WEEKDAY()

WHILE … LOOP Statement

FUNCTION WHILE executes a series of statements in a loop as long as a given condition is true.

VERSIONS 1.0 and above

FORMAT

WHILE (cond-expression)

...

LOOP

REMARKS

cond-expression may be any expression.

If cond-expression is true (non-zero), the statements in the loop are executed until the

LOOP statement is encountered. Control Script Module then returns to the WHILE statement and checks cond-expression again. If it is still true, the process is repeated. If it is not true, execution resumes with the statement following the LOOP statement.

WHILE … LOOP may be nested to any level. Each LOOP will match the most recent

WHILE.

EXAMPLE

//Increment the value of X by 1 repeatedly until N is not equal to 1

WHILE(N == 1)

X = X + 1

LOOP

5-72

SmartScript User Manual Chapter 5

WRITE Statement

FUNCTION WRITE writes data to the specified file.

VERSIONS 1.0 and above

FORMAT

WRITE file-number, string-expression

REMARKS

file-number

string-expression is an integer expression, which evaluates to a file number. is a string expression that containing the data to be written to the file.

If the file associated with the specified file number was successful opened, this statement writes data to the file. If the file is a communications file, this statement writes data to the transmit-queue.

EXAMPLE

WRITE 1, “This is a test.\r\n”

XOR08() Function

FUNCTION XOR08 returns the 8-bit exclusive OR checksum value of the specified string.

VERSIONS 1.0 and above

FORMAT

N% = XOR08(string-expression)

REMARKS

string-expression may be any string expression.

EXAMPLE

N% = XOR08(“\x02ABC\x03”)

// N% will be 65

5-73

SmartScript User Manual Chapter 5

YEAR() Function

FUNCTION YEAR returns the current year.

VERSIONS 1.0 and above

FORMAT

N% = YEAR()

REMARKS

This function returns the current year.

EXAMPLE

N% = YEAR()

5-74

Appendix A Environment Limits

Name, String, and Number Limits

Maximum

Variable-name length

String length

Integer

Real:

Positive

Negative

16 characters

32,767 characters

-2147483648

Minimum

1 character

0 character

2147483647

1.79769313486231D+308 4.940656458412465D-324

-4.940656458412465D-324 -1.79769313486231D+308

Array Limits

Array size (all elements):

Number of dimensions allowed

Array subscript value

Maximum

32,767 bytes (32K)

3

8,192

1 byte

1

1

Minimum

Procedure and File Limits

Program file size

Procedure size

Number of line labels

Number of TAG label

Number of variables

Data file numbers

Level of nest

Maximum

2G bytes

65535 lines

65535

1024

65535

16

512

1

0

0

0

0 byte

0 line

0

Minimum

FORMAT$()

GOSUB

IDLE

ISTR$()

LEN()

LOOP

MAX()

MID$()

MONTH()

NERR()

OPEN

PLAY

READ

RSTERR

SEEK

SLEEP

ABS()

ALMGRP()

ASC()

BEEP

CHOICE()

COMMODE

COPY

CRC16()

DATETIME$()

DEL

ELSE

ENDIF

ERRORTAG

EXP()

FILE$()

FMDBL()

Appendix B Keywords

FPOS()

GOTO

IF

IVAL()

LN()

LOWER$()

MD

MIN()

MOVE

NOW()

PASS

RAND()

RETURN

RTRIM$()

SETDIR

SIN()

SQRT()

ACOS()

ALMPRI()

ASIN()

CASE

CHR$()

COMOPEN

COS()

CRC32()

DAY()

DIM

ELSEIF

ENDSW

EXEC

FAC()

FLEN()

FMFLT()

FPRINT

HOUR()

INT()

LEFT$()

LOG()

LTRIM$()

MESSAGE

MINUTE()

MSGBOARD

NOW$()

PI

RD

RIGHT$()

SECOND()

SHORTCUT

SINH()

STOP

ALARM()

ALMTAG$()

ATAN()

CD

CLOSE

CONTINUE

COSH()

CREATE

DEFAULT

DIR$()

END

ERRID()

EXIT

FCHECK()

FMBCD()

FOR

STR$()

SWITCH

TAN()

TIMER()

TRAPOFF

VAL()

WRITE

STRING$()

SYSINFO$()

TANH()

TOKEN

TRAPON

WEEKDAY()

XOR08()

SUM08()

TAG()

TICK()

TONE

UPPER$()

WHILE

YEAR()

&

|

Logic AND

Logic OR

Appendix C Operator Precedence

Operator

-

Negation

!

Logic NOT

~

Invert

^

Exponentiation

Operation

<

>

<=

>=

<<

>>

^<

>^

==

!=

*

/

\

+

-

Multiplication

Division

Integer Modulus

Addition

Subtraction

Shift left

Shift right

Rotate left

Rotate right

Less than

Greater than

Less than or equal to

Greater than or equal to

Equality

Inequality

AND

AND

XOR

Exclusive OR

OR

OR

Direction

Precedence

High

Low

Appendix D Error Codes

Code

20

21

22

23

24

25

12

13

14

15

16

17

18

19

7

8

9

10

11

4

5

6

1

2

3

34

35

36

37

26

27

28

29

30

31

32

33

Out of Memory !!

Too many Variable !!

Too many Constant !!

Too many Label !!

Out of Operator Stack !!

Invalid Line Label !!

Invalid Command !!

Syntax Error !!

Invalid String Constant !!

Invalid Variable !!

Expression too Complex !!

Extra Argument !!

Type Mismatch !!

Array Error !!

Math Error !!

Expression Error !!

Undefined Label !!

Division by Zero !!

RETURN without GOSUB !!

ENDIF without IF !!

IF without ENDIF !!

ENDSW without SWITCH !!

SWITCH without ENDSW!!

LOOP without FOR or WHILE !!

FOR or WHILE without LOOP !!

Invalid Option !!

Program no Compiled !!

End of Program !!

Program Break !!

Out of Range !!

Out of String Length !!

Operation fail !!

Variable redefined !!

File in used !!

File not open !!

Invalid Tag !!

Inner Error !!

Message

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement