Ronda Startech 5020B Owner Manual

www.ronda-startech.com
30
60
12
Cal. 5020.B
45
3
9
20
15
10
6
30
21
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
Accuracy: +20 / -10 seconds per month
English
User’s Manual
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Description of the display and control buttons
Hour counter
30
Display elements
Control buttons
20
45
3
6
(Start / Stop / Reset)
60
12
9
Chronograph: Basic function
Push-button A
Example:
Start: Press push-button A.
15
10
30
Stop: to stop the timing, press
Minute hand
pushbutton A once more and read
the 3 chronograph counters:
4h / 20 min / 38 sec
21
Hour hand
Push-button A
Minute counter
30
60
12
45
3
9
20
Hour counter
Minute counter
6
Centre stop-second
15
Crown
10
30
Zero positioning:
30
Push-button B
21
45
3
9
20
Second hand
6
Press push-button B.
(The 3 chronograph hands will be reset to
their zero positions).
60
12
15
10
30
Date
21
Push-button B
Hour counter
30
45
3
6
60
12
9
20
Chronograph:
Accumulated timing
Push-button A
15
10
30
Example:
Start:
(start timing)
Stop:
(e.g. 15 min 5 sec following )
12
* Stop:
Minute counter
(e.g. 10 min 5 sec following )
= 25 min 10 sec
45
3
9
20
6
60
Example:
Start: (start timing)
Display interval:
e.g. 10 minutes 10 seconds (timing
continues in the background)
* Making up the measured time:
(the 3 chronograph hands are quickly
advanced to the ongoing measured time).
Stop: (Final time is displayed)
Reset:
The 3 chronograph hands are returned to
their zero position
15
10
30
Restart: (timing is resumed)
21
Chronograph:
Intermediate or interval timing
Push-button A
30
21
Push-button B
Minute counter
(The accumulated measured time is shown)
Reset:
30
12
45
3
9
20
6
The three chronograph hands are returned
to their zero positions.
60
15
10
Please note:
* Following , the accumulation of the
timing can be continued by pressing
push-button A
(Restart / Stop, Restart / Stop, …)
30
21
Push-button B
Hour counter
Center stop-second
30
45
3
6
15
10
30
I
II
60
12
45
3
6
III
15
10
21
Push-button B
Adjusting the chronograph
hands to zero position
앗
A
앗
B
앗
A
Pull out the crown to position III (all 3
21
chronograph hands are in their correct or
incorrect zero position).
Minute counter
앗
Push-button A
Keep push-buttons A and B depressed
30
45
3
6
simultaneously for at least 2 seconds (the
centre stop-second rotates by
360° 씮 corrective mode is activated).
60
12
9
20
15
10
30
Adjusting the centre stop second
A
1 x short
Single step
A
Continuous
long
Adjusting the next hand B
Adjusting the minute counter hand
and the hour counter hand
(mechanical coupled)
A
1 x short
Single step
A
Continuous
long
Returning the crown to position I
Termination of the chronograph hands
adjustment (can be carried out at any time).
앗
III
Please note:
* Following , further intervals or intermediates can be displayed by pressing
push-button B (display interval / make up
measured time, ...)
30
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g. following a battery change).
60
12
9
20
30
9
20
I
III
II
21
Push-button B
60
12
45
3
9
20
6
Setting the date (quick mode)
Setting the time
Second hand
30
* Pull out the crown to position III
(the watch stops).
15
10
30
12
I
II
45
3
9
20
30
6
60
continues to run).
15
10
30
III
I
Turn the crown until you reach the correct
21
Pull out the crown to position II (the watch
Turn the crown until the correct
II
date 1 appears.
31
time 8:45.
Push the crown back into position I.
* Push the crown back into position I.
30
20
45
3
9
6
60
12
15
10
30
I
II
III
21
Please note:
* In order to set the time to the exact second,
must be pulled out when the second
hand is in position «60» (I).
Once the hour and minute hands have been
set, must be pushed back into position I
at the exact second.
30
20
45
3
6
Please note:
During the date changing phase between
9 PM and 12 PM; the date must be set to the
date of the following day.
60
12
9
15
10
An extreme acceleration in setting the date
with quick mode can induce a false date indication. The synchronization is re-established
by setting the date from 01 till 31 (crown in
position II).
30
I
II
01
Setting the date/time
앗
Second hand
Crown
30
45
3
6
Example:
– Date / time on the watch: 17 / 1:25 AM
4 / 8:30 PM
– Present date / time:
60
12
9
20
15
10
30
I
II
30
45
3
6
(the watch stops).
15
Turn the crown until the correct date
10
30
I
Pull out the crown to position II
(the watch continues to run).
17
* Pull out the crown to position III
60
12
9
20
II
III
4
correct time 8:30 PM appears.
Date
Push the crown back into position I.
Turn the crown until yesterday’s date
30
45
3
6
60
12
9
20
appears.
** Continue to turn the crown until the
03
15
앗
30
20
30
I
03
60
12
45
3
9
10
appears 3
6
15
10
30
I
II
04
II
III
Please note:
* To set your watch to the exact second,
please refer to the chapter entitled «setting the time».
** Please observe the AM/PM clock rhythm.
11 / 2006
RONDA AG
CH-4415 Lausen/Switzerland