AIR KING VENTILATION PRODUCTS
DELUXE QUIET BATHROOM FANS
The Deluxe Quiet Series Bathroom Fans provide powerful
ventilation, low sound levels and attractive grilles.
The contoured grille almost disappears into the ceiling. At the highest point
the grille projects only 1/2 in. down from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation at minimum
sound. The Deluxe Quiet Series is easily installed using either the adjustable hanging brackets for 15-in. centers, or the large keyhole slots. We
offer the following five models:
P4357
AK80LS
• Super Quiet 80 CFM at 1.0 Sones
• Energy Star® labeled
AK80
• 80 CFM at 1.5 Sones
• Energy Star® labeled
AK90
• 90 CFM at 1.5 Sones
• Energy Star® labeled
P4002
UL listed for installation over a tub
or shower on a GFI circuit.
P4003
AK110
• 110 CFM at 2.0 Sones
AK130
• 130 CFM at 2.5 Sones
For larger areas needing more powerful ventilation the AK200 and AK300
provide the answer. The AK200 and AK300 combine all the features of the
AK80 utilizing a 3-1/4-in. x 10-in. duct. The stylish rounded edge square
grille projects less than 1 in. down from the ceiling.
AK200
• 200 CFM at 5.0 Sones
AK300
• 300 CFM at 5.0 Sones
P4004
P4005
UL listed for installation over a tub
or shower on a GFI circuit.
P/N
DESCRIPTION
EXHAUST
CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
CFM/SONES
AK80LS
Ceiling Exhaust, Low Sone
75 to 100
4
0.35
80/1.0
AK80
Ceiling Exhaust
75 to 100
4
0.40
80/1.5
AK90
Ceiling Exhaust
85 to 115
4
0.42
90/1.5
AK110
Ceiling Exhaust
95 to 125
4
0.45
110/2.5
AK130
Ceiling Exhaust
105 to 135
4
0.50
130/2.5
AK200
Ceiling Exhaust
185 to 250
3-1/4 x 10
1.70
200/5.0
AK300
Ceiling Exhaust
280 to 375
3-1/4 x 10
1.70
270/5.0
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
401
AIR KING VENTILATION PRODUCTS
DELUXE QUIET FAN/LIGHT SERIES
The Deluxe Quiet Series Bathroom Fans with Light provide powerful
ventilation, low sound levels and attractive grilles.
The Deluxe Quiet Fan/Light Series features a contoured low profile grille,
with a moonstone glass lens, a 7-watt night light and both an incandescent
and a fluorescent model. Fan, light, and night light can all be wired to operate separately. The electronically balanced centrifugal blower wheel
assures maximum ventilation at minimum sound. The Deluxe Quiet
Fan/Light Series is easily installed using either the adjustable hanging
brackets for 16-in. centers, or the large keyhole slots.
AK100L
• 100 CFM at 2.5 Sones
• Bright 100 watt maximum light (bulbs not included).
AK100FL
• 100 CFM at 2.5 Sones
• Energy saving 2 pin quad tube 26 watt maximum
fluorescent light (bulbs not included).
P4006
UL listed for installation over a tub
or shower on a GFI circuit.
P4007
P/N
AK100L
AK100FL
DESCRIPTION
DUCT SIZE
(in.)
AMPS
CFM/SONES
Ceiling Exhaust/Light
95 to 125
4
1.30
100/2.5
Ceiling Exhaust/Fluorescent Light
95 to 125
4
1.00
100/2.5
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
402
EXHAUST
CAPACITY
(sq ft)
AIR KING VENTILATION PRODUCTS
COMBINATION FAN/LIGHT SERIES
Our ASLC50 provides an economical way to light and ventilate without
compromising style.
The stylish grille design fits in with all decors. The high impact polycarbonate lens allows
for easy relamping. Fan and Light can be wired to operate separately and is available in
both an incandescent and fluorescent model.
ASLC50
• 50 CFM at 2.5 Sones
• 100 watt maximum light (bulbs not included).
ASLC50FL
• 50 CFM at 2.5 Sones
• Energy saving fluorescent light (bulbs not included).
P4008
UL listed for installation over a tub
or shower on a GFI circuit.
P4009
P/N
ASLC50
ASLC50FL
DESCRIPTION
EXHAUST
CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
CFM/SONES
Ceiling Exhaust/Light
45 to 60
3
1.20
50/2.5
Ceiling Exhaust/Fluorescent Light
45 to 60
3
1.20
50/2.5
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
403
AIR KING VENTILATION PRODUCTS
BATHROOM VENTILATORS WITH “SNAP-IN” INSTALLATION
High performance, attractive stylized grille and quick installation makes the
High Performance Series Bathroom Fans right for the job.
The High Performance Series features our unique Snap-In Installation System. The
included bracket nails or screws to the ceiling joist allowing the fan housing to “Snap-In”.
Connect the wiring and the ducting, install the easy fitting grille and you are done. A bath
fan installation can now be doe in minutes instead of hours. Our durable flame retardant
ABS plastic housing ensures quiet operation and maximum performance.
BFQ90
• 90 CFM at 2.5 Sones
BFQ110
• 100 CFM at 3.5 Sones
BFQ140
• 120 CFM at 4.0 Sones
BFQ175
• 150 CFM at 4.5 Sones
P4010
UL listed for installation over a tub
or shower on a GFI circuit.
P4011
P/N
DESCRIPTION
EXHAUST
CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
BFQ90
Ceiling Exhaust
85 to 115
4
0.45
90/2.5
BFQ110
Ceiling Exhaust
95 to 125
4
0.45
100/3.5
BFQ140
Ceiling Exhaust
115 to 145
4
0.80
120/4.0
BFQ175
Ceiling Exhaust
140 to 185
4
1.30
150/4.5
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
404
CFM/SONES
AIR KING VENTILATION PRODUCTS
ADVANTAGE 3″″ AND 4″″ DUCT SERIES
The Advantage 3″″ and 4″″ Duct Series provide economical ventilation
for bathrooms, utility rooms and other areas needing ventilation.
The Advantage 3″ Duct Series features a slim 3-3/4″ housing, allowing the fan
to be installed in either wall or ceiling applications. The durable double thick
metal mounting ears with large keyhole slots make it easy to install. All three
models are available in project packs with the added feature that the same
housing fits each of the three different motor, blade and grille combinations.
(Six pack housing and six pack motor/blade/grille.)
AS50
• 50 CFM at 2.5 Sones
AS60
• 60 CFM at 3.0 Sones
AS70
• 70 CFM at 3.5 Sones
P4013
P4012
The Advantage 4″ Duct Series is designed for ventilating larger areas. The
adjustable mounting brackets allow the fan to be mounted between joist with
16″ centers. Both models are available in project packs. (Four pack housing
and four pack motor/blade/grille.)
BF90
• 90 CFM at 2.5 Sones
BF120
• 120 CFM at 4.0 Sones
P4015
P4014
DESCRIPTION
EXHAUST CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
CFM/SONES
AS50
Wall/Ceiling Exhaust
45 to 60
3
0.57
50/2.5
AS60
Wall/Ceiling Exhaust
55 to 75
3
0.57
60/3.0
AS70
Wall/Ceiling Exhaust
65 to 85
3
1.20
70/3.5
BF90
Ceiling Exhaust
85 to 115
4
0.45
90/2.5
BF120
Ceiling Exhaust
115 to 145
4
0.80
120/4.0
P/N
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
PROJECT PACKS
MOTOR P/N
AS50MBG
AS60MBG
AS70MBG
BF90MBG
BF120MBG
HOUSING P/N
ASHSG
ASHSG
ASHSG
BF912-HSG
BF912-HSG
STD PACKS
6 packs
6 packs
6 packs
4 packs
4 packs
405
AIR KING VENTILATION PRODUCTS
Fire Rated Bathroom Fan Series
When fire codes need to be met, Air King’s Fire Rated Series
bathroom fans are the perfect solution.
The Fire Rated Bathroom Fan Series is designed to automatically shut off
and seal the duct from the rest of the swelling once the temperature of the
air passing through the damper exceeds that of the fusible link. These fans
meet the NFPA (National Fire Protection Association) Standard 90A and
the Ceiling Radiation Damper is ULC Classified and rated for 3 to 4 hour
fire resistance.
P4016
Advantage 3″″ Duct Fire Rated Series
• Three part system (Fire Housing, Motor/Blade/Grille and Fire Damper).
• Each part distributed in master packs of 6.
• Available in 50, 60 and 70 CFM models.
Advantage 4″″ Duct Fire Rated Series
• Three part system (Fire Housing, Motor/Blade/Grille and Fire Damper).
• Each part distributed in master packs of 4.
• Available in 90 and 120 CFM models.
P4017
Deluxe Quiet Fire Rated Series
• Three part system (Fire Housing, Motor/Blade/Grille and Fire Damper).
• Each part distributed in master packs of 4.
• Available in 80, 90, 110, and 130 CFM models.
P4018
P/N
FIRE RATED
HOUSING
FIRE DAMPER
EXHAUST
CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
CFM/SONES
AS50MBG
FRBFH2
FD5675
45 to 60
3
0.57
50/2.5
AS60MBG
FRBFH2
FD5675
55 to 75
3
0.57
60/3.0
AS70MBG
FRBFH2
FD5675
65 to 85
3
1.20
70/3.5
BF90MBG
FRBF912H
FD912
85 to 115
4
0.45
90/2.5
BF120MBG
FRBF912H
FD912
115 to 145
4
0.80
120/4.0
AK80MFR
FRAK2HSG
FD89113
75 to 100
4
0.40
80/1.5
AK90MFR
FRAK2HSG
FD89113
85 to 115
4
0.42
90/1.5
AK110MFR
FRAK2HSG
FD89113
95 to 125
4
0.45
110/2.0
AK130MFR
FRAK2HSG
FD89113
105 to 135
4
0.50
130/2.5
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
406
AIR KING VENTILATION PRODUCTS
DELUXE COMBINATION HEATERS
The Deluxe Combination Heater Series will instantly make your home a more
comfortable place to live.
With 1500 watts of power, providing 5120 BTUs of heat, the Deluxe Combination Heater
Series is the solution for rooms that need extra warmth. Whether you want extra lighting, a
night light and/or an exhaust fan is up to you. We have the combination that is right for your
need.
AK965
• 4 function heat/exhaust/light/7 watt night light.
• 2 double switches and wall plate included.
• Moonstone glass lens.
P4019
• 70 CFM at 3.5 Sones.
• 100 watt maximum light (bulbs not included).
AK965FL
• All features of model AK965 except with an energy saving fluorescent light (bulbs not
included).
P/N
DESCRIPTION
AK965
P4020
Exhaust/Heat/Light
AK965FL Exhaust/Heat/Fluorescent Light
EXHAUST
CAPACITY
(sq ft)
DUCT SIZE
(in.)
AMPS
CFM/SONES
65
4
14.2
70/3.5
65
4
14.2
70/3.5
Specifications subject to change.
CFM = Cubic Feet per Minute.
Sones = Sound Level Measurement.
407
AIR KING VENTILATION PRODUCTS
SWITCHES AND TIMERS
P4022
P4021
AKS2
AKS3
• Double switch for independent
on/off control.
• Triple switch for independent on/off
control.
• For use with combination fan/light
series or any application that calls
for two separate control switches.
• For use with deluxe and deluxe quiet
fan/light/night light series or any
application that calls for three separate control switches.
• All white finish.
• All white finish.
P4023
AKS4
P4024
AKT15
• Two double switches complete with
quad wall plate for independent
on/off control.
• 15 minute timer switch for on/off
control.
• For any application that calls for four
separate control switches.
• All white finish.
• All white finish.
• For use with bulb heater series.
AKT60
• 60 minute timer switch for on/off
control.
• For use with bulb heater series.
• All white finish.
408
FIELD CONTROLS VENTING PRODUCTS
COMBUSTION AIR SYSTEMS
• Provides controlled amounts of outside air for proper
combustion of oil or gas heating appliances.
Fan-In-A-Drum
• Works with a variety of gas or oil appliances in
Residential, Commercial, and Industrial applications.
P4363
P/N
MAS-1
CAS-1
CAS-2B
CAS-2C
CAS2-WM
CAS-2W
CAS-2A
CAS-2BB
CAS2-90
CAS-2B-90E
CAS-3
CAS-4
CAS-4mV
CAR
CAS-6
DESCRIPTION
P/N
COMBUSTION AIR & MAKE-UP AIR SYSTEMS
Make-Up Air System w/6″ IAH
CAS-7
Connection Kit without Boot, Oil
VRV-4
Beckett AirBoot® Kit (2.0 GPH), Oil
VRV-6
Carlin AirBoot® Kit (2.0 GPH), Oil
IAH-4
Weil McLain AirBoot® Kit (2.0 GPH), Oil
IAH-6
Wayne AirBoot® Kit (2.0 GPH), Oil
CAT-4HD
Aero AirBoot® Kit (2.0 GPH), Oil
CAT-5
Beckett BigBoot™ (4.5 GPH), Oil
CAT-6
Furnace AirBoot® (1.5 GPH), Oil
CAT-4B
Beckett Furnace AirBoot® (1.5 GPH), Oil
CAT-5B
Fan In A Can, 110V, Oil Systems
CAT-6B
Fan In A Can, 24V, Gas Systems
HWK
Fan In A Can, mV Systems
CAC-24
Car Control Only
CAC-120
Fan In A Drum 900,000 BTU
DESCRIPTION
Fan In A Drum 1.8 M BTU
4″ Vacuum Relief Valve
6″ Vacuum Relief Valve
4″ Intake Air Hood
6″ Intake Air Hood
SWG Comb. Air Tee
SWG Comb. Air Tee
SWG Comb. Air Tee
CAT-4, VRV-4 & Beckett Boot
CAT-5, VRV-4 & Beckett Boot
CAT-6, VRV-4 & Beckett Boot
Water Heater Ctrl w/CAS-4
24 V Control with CAS-4
120 V Control with CAS-3
409
FIELD CONTROLS VENTING PRODUCTS
THE SWG POWER VENTER
• Combines the motor, blower and vent hood in one
complete, easy to install unit that significantly reduces
motor noise.
• For Residential, Commercial, and Industrial use.
P4364
P/N
PVG-100
PVG-300
PVG-600
PVG Pack-100
PVG Pack-300
PVO-300
PVO-600
PVE-1200
SWH-3
SWH-4
SWH-5
SWH-6
SWH-8
DVS-3
DVS-4
DVS-5
DVS-6
SWG-3
SWG-4HD
SWG-4HDS
SWG-5
SWG-5s
SWG-5AGA
SWG-6
SWG-6s
SWG-6AGA
SWG-8
CAT-4HD
CAT-5
CAT-6
410
DESCRIPTION
P/N
POWER VENTERS & ACCESSORIES
24V Gas Venter, 4″ Inlet
CAT-6B
24V Gas Venter, 4″ Inlet
SWG-4G
24V Gas Venter, 5″ Inlet
SWG-4L
24V Gas Kit w/4″ MG1 & Hood
SWG-3 RMK
24V Gas Kit w/4″ MG1 & Hood
SWG-4 RMK
Oil Venter, 4″ Inlet
SWG-4HD RMK
Oil Venter, 5″ Inlet
SWG-5 RMK
Oil or Gas System, 8″ Inlet
SWG-6 RMK
3″ Vent Hood
SWG-7 RMK
4″ Vent Hood
SWG-8 RMK
5″ Vent Hood
SWG LUBE
6″ Vent Hood
CK-20F
8″ Vent Hood
CK-21
3″ Vent Hood & Comb. Intake w/VRV
CK-40F
4″ Vent Hood & Comb. Intake w/VRV
CK-41F
5″ Vent Hood & Comb. Intake w/VRV
CK-43
6″ Vent Hood & Comb. Intake w/VRV
CK-43F
Power Venter, 3″ Inlet
CK-20F
Power Venter, 4″ Inlet
CK-81
Stainless Steel, 4″ Inlet
CK-91
Power Venter, 5″ Inlet
CK-91F
Stainless Steel, 5″ Inlet
CK-92F
AGA Venter, 5″ Inlet
CK-61
Power Venter, 6″ Inlet
CK-62
Stainless Steel, 6″ Inlet
CK-63
AGA Venter, 6″ Inlet
CK-66
Power Venter, 8″ Inlet
CK-67
SWG Comb. Air Tee
PEK-4HD
SWG Comb. Air Tee
PEK-5
SWG Comb. Air Tee
PEK-6
DESCRIPTION
CAT-6, VRV-4 & Beckett Boot
80+ Gas Vent Kit
Lennox
3″ Repl. Motor Kit
4″ Repl. Motor Kit
4″ HD Repl. Motor Kit
5″ Repl. Motor Kit
6″ Repl. Motor Kit
7″ Repl. Motor Kit
8″ Repl. Motor Kit
Motor Lubricant
Water Heater Control, Post Purge
Instantaneous Water Heater
Fixed Post Purge
Draft Hood Systems with GSK-3
80+ Systems, Adj. Post Purge
80+ Systems, Fixed Post Purge
Water Heater Control, Post Purge
Pool or Commercial Water Heaters
80+ Adj. Post Purge, Draft Control
80+ Fxd. Post Purge, Draft Control
Draft Hood Sys, Fxd Post Purge
Electronic Post Purge
Thermal Post Purge
Venter/Burner Control System
Single App. w/R-8184P Control
Multiple App. w/R-8184P Control
4″ SWG Extension Kit
5″ SWG Extension Kit
6″ SWG Extension Kit
FIELD CONTROLS VENTING PRODUCTS
DRAFT CONTROLS
For proper operation and efficient fuel consumption in oil,
gas and/or coal-fired heating appliances, draft must remain
constant.
P4365
P/N
4RC-STD
4RC-LC
5RC-STD
5RC-LC
6RC-STD
6RC-LC
7RC-STD
7RC-LC
8RC-STD
8RC-LC
9RC-STD
9RC-LC
6M-STD
6M-LC
7M-STD
7M-LC
8M-STD
8M-LC
9M-STD
9M-LC
4MG1-STD
4MG1-LC
5MG1-STD
5MG1-LC
6MG1-STD
6MG1-LC
7MG1-STD
DESCRIPTION
P/N
BAROMETRIC DRAFT CONTROLS
Draft Control with Collar
7MG1-LC
Draft Control Less Collar
8MG1-STD
Draft Control with Collar
8MG1-LC
Draft Control Less Collar
9MG1-STD
Draft Control with Collar
9MG-1OC
Draft Control Less Collar
5RC/BT
Draft Control with Collar
5RC-R&G BLK
Draft Control Less Collar
6RC/BT
Draft Control with Collar
6RC-R&G BLK
Draft Control Less Collar
8RC/BT
Draft Control with Collar
8RC-R&G BLK
Draft Control Less Collar
10M+MG2-STD
Draft Control with Collar
10M+MG2-LC
Draft Control Less Collar
12M+MG2-STD
Draft Control with Collar
12M+MG2-LC
Draft Control Less Collar
14M+MG2-STD
Draft Control with Collar
14M+MG2-LC
Draft Control Less Collar
16M+MG2-STD
Draft Control with Collar
16M+MG2-LC
Draft Control Less Collar
18M+MG2-STD
Draft Control with Collar
18M+MG2-LC
Draft Control Less Collar
20M+MG2-STD
Draft Control with Collar
20M+MG2-LC
Draft Control Less Collar
24M+MG2-STD
Draft Control with Collar
24M+MG2-LC
Draft Control Less Collar
28M+MG2-STD
Draft Control with Collar
32M+MG2-STD
DESCRIPTION
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
5″ Black Tee with Control
Control Only
6″ Black Tee with Control
Control Only
8″ Black Tee with Control
Control Only
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control Less Collar
Draft Control with Collar
Draft Control with Collar
DRAFT INDUCERS
• Solve the drafting problems caused by short chimneys,
undersized flue pipes and negative building pressures.
• Designed for easy installation in a wide variety of applications,
including oil or gas fired furnaces, water heaters and boilers.
P4366
P/N
DESCRIPTION
DI-1
DI-2
DI-3
DI-4
DI-5
DIP-1
Draft Inducer 3 - 6″ Pipe
Draft Inducer 5 - 8″ Pipe
Draft Inducer 8 - 12″ Pipe
Draft Inducer 10 - 16″ Pipe
Draft Inducer 14 - 20″ Pipe
Draft Inducer Proving Switch
P/N
DRAFT INDUCERS
6C
8C
10C
13C
SC-6, 8
SC-10,13
DESCRIPTION
6″ Chimney Top Inducer
8″ Chimney Top Inducer
10″ Chimney Top Inducer
13″ Chimney Top Inducer
Speed Control for 6″ C, 8″ C
Speed Control for 10″ C, 13″ C
411
FIELD CONTROLS VENTING PRODUCTS
GVD SERIES VENT DAMPER
• Works automatically to allow natural draft during appliance
operation while preventing residual appliance heat and
conditioned air from escaping during off cycles.
• Prevents the infiltration of cold air during downdrafts. The vent
damper is made of stainless steel and is available in 8 sizes,
4″ through 12″.
P4367
P/N
DESCRIPTION
GVD-4
GVD-5
GVD-6
GVD-7
GVD-8
4″ Vent Damper
5″ Vent Damper
6″ Vent Damper
7″ Vent Damper
8″ Vent Damper
P/N
GAS VENT DAMPERS
GVD-9
GVD-10
GVD-12
FCU-8
DESCRIPTION
9″ Vent Damper
10″ Vent Damper
12″ Vent Damper
8′ Universal Wiring Harness
AIR BOOSTERS
• Improve airflow and distribution of conditioned air to “problem”
rooms in homes and businesses.
• Mounted in ductwork. Improves airflow by up to 425 cfm,
improving heating/cooling system efficiency and saving energy.
P4368
P/N
JR-2
KS-4
KS-5
KS-6
KS-8
AB-1
DESCRIPTION
P/N
EVENAIR AIR BOOSTERS
Fits 5″+ Square or Round Duct
ABA-1
Fits 4″ Round Duct
Eliminator
Fits 5″ Round Duct
Eliminator Cntrl
Fits 6″ Round Duct
RB-1
Fits 8″ Round Duct
RF-1
Fits 5″+ Square or Round Duct
DESCRIPTION
Air Booster Activator
Crawl Space Vent
Dehumidistat Control
Register Booster
Room Fan/Air Mover
THERMAL SAFETY SWITCHES
• Detect flue gas spillage due to a blocked flue, continuous
downdrafting or inadequate draft condition.
• Gas fired and oil fired applications.
P4369
P/N
WMO-1
FTS-1
FTS-4
FTS-6
GSK-3
GSK-4
SSK-1
SSK-2
SSK-3
TCA-1
TSP-1
412
DESCRIPTION
SAFETY SWITCHES
Oil-Fired Safety Switch
120/240V 140° Auto Reset
120/240V 140° Manual Reset
120/240 V 180° Manual Reset
mV/24V 180° Manual Reset
mV/24V 200° Manual Reset
mV/24V 180° Manual Reset Kit
mV/24V 200° Manual Reset Kit
mV/24V 200° Manual Reset Kit
Thermocouple Adapter
mV/24V 200° Manual-Linear
P/N
3SK
4SK
5SK
6SK
7SK
8SK
10SK
12SK
14SK
DESCRIPTION
STARKAP CHIMNEY CAPS
3″ Aluminized Chimney Cap
4″ Aluminized Chimney Cap
5″ Aluminized Chimney Cap
6″ Aluminized Chimney Cap
7″ Aluminized Chimney Cap
8″ Aluminized Chimney Cap
10″ Aluminized Chimney Cap
12″ Aluminized Chimney Cap
14″ Aluminized Chimney Cap