Samsung YP-780H Инструкция по использованию

AH68-01510B (Rev 0.0)
- Featuring an Encoding Function
- Supports 3D surround sound
- Removable Storage Device
- Touchpad operation
- MP3 & WMA Playback
- FM Reception
- Voice Recording Function
- 20-Hour Continuous Play
Contents
Safety Instructions
Features
Components
Location of Controls (yepp)
4
6
9
10
Connection to Computer
Connecting yepp to PC
Manual Installation of USB Driver
Using the removable storage
● Downloading/Uploading files
● Disconnecting the USB cable
Installing yepp Studio
● To View Help on yepp Studio
Installing yepp WAV Converter
Convert WAV File
12
16
20
20
21
22
24
26
28
Basic Usage
Playing Music and Turning Off the Device
Adjusting the Volume/Hold Function
Changing Modes
Recording Voice
Encoding MP3s
Searching for Music/Voice Files
Listening to FM Radio
Encoding From FM Radio
2
30
31
32
33
34
36
38
40
Loop Repeating
Setting SRS
MENU Mode
Selecting the Play Mode
Selecting the EQ Mode
Selecting the Play Folder
Managing Files
● Deleting
● Formatting
Setting the Advanced Functions
DISPLAY
● INFORMATION / BACK LIGHT
● CONTRAST / SCROLL SPEED / LANGUAGE
SOUND CONTROL
● WOW LEVEL / OPTIMIZATION
● ENCODE BIT RATE
● BEEP ON/OFF
● DEFAULT VOLUME
TIME CONTROL
● INTRO TIME / POWER OFF TIME / SLEEP TIME
Setting the FM Frequency Unit
ENG
Additional Usage
Preparations
41
42
43
44
45
46
47
47
48
49
50
50
51
52
52
53
53
53
54
54
55
Appendix
MENU Table
56
Customer Support
Troubleshooting
Specifications
58
60
3
Safety Instructions
Do not expose to extreme temperatures (above 95°F or below 23°F).
Do not expose to moisture.
Do not apply excessive pressure
to the device.
Do not let any foreign matter
spill into the device.
Earphones
ENG
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● It may cause an accident if you turn up the volume of the earphones while walking down the
street, especially crossing at intersections.
Protect your ears
Do not place heavy objects on
top of the device.
Do not expose to chemicals such
as benzene and thinners.
Remove batteries when the device
is left unused for a long period of
time.
● Do not turn up the volume too high.
Doctors warn against prolonged exposure to high volume.
● Stop using the device or turn the volume down if you have ringing in your ears.
Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Humidity : 10 ~ 75%
Do not expose to direct sunlight
or heat sources.
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
Environmental Information
● Follow local guidelines for waste disposal when discarding packages, batteries, and old electronic appliances.
● Yepp packages use cardboard, polyethylene etc., and do not use any unnecessary materials.
4
✽ Please be aware that we disclaim all responsibility for damages from loss of saved or recorded
data due to breakdown, repair or other causes.
5
ENG
Featuring an Encoding Function
Touchpad operation
You can make a MP3 file out of an source using the ENC jack on the main unit.
You can also convert an FM radio program into an MP3 file in real time.
You can easily operate the functions you want by using the touchpad.
Supports 3D surround sound
● You can feel the deep base and 3D surround sound.
●
MP3 & WMA Playback
MP3 is an MPEG1 Layer3 audio format.
WMA is a Microsoft Windows Media audio format.
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
FM Reception
Removable Storage Device
● You can easily copy and paste files to the yepp player using Windows Explorer.
Listening to an FM program is made easy with Auto Search and Frequency
Memory functions.
ENG
Components
Voice Recording Function
You can do a Voice Recording with high quality and use it for a conference.
Player
Earphones
USB Cable
User manual
Sound
You can adjust equalizer manually.
Battery
(AAA/LR03 type)
20-Hour Continuous Play
This unit uses two AAA/LR03 alkaline battery. Operation can last up to 20 hours.
Actual playing time may vary according to the type and capacity of the battery.
Neck Strap
Carrying case
Line Cable
Installation CD
Model
YP-780 H
YP-780 V
YP-780 X
YP-780 Z
Built-in memory
128MB
256MB
512MB
1GB
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change for improvement without notice.
Notice :
● Do not mix rechargeable and nonrechargeable batteries, alkaline or Ni-MH types of batteries,
or different grades or brands of batteries.
9
Location of Controls (yepp)
Earphone Jack
Display
ENG
ENC Jack
Play/Stop/Pause indicator
Playtime indicator
Microphone
Equalizer, SRS indicator
Neck strap Hook
Play mode indicator
Display
Play method indicator/
Interval repeat indicator
NOR
00:01:30
NOR
Remaining Battery Power indicator
001
Get Original, Black Eyed
Track Number indicator
Title (track & artist) indicator
MENU/MODE/
Loop Repeating Button
Volume Button
On/Off/Hold Switch
Move to Track/
Speed Search Button
Inserting a Battery
Open
Close
1
Slide the cover in the direction
of the arrow to open.
2
Insert a battery to the right poles
+ , – and push-close the cover in
the direction the arrow as indicated.
OP
EN
SRS Button
Recording Button
Play/Pause Button
USB Cable Connection
Port
Battery Cover
10
Note :
● Do not place heavy objects on the cover.
11
Connecting yepp to PC
The PC system must meet the
following specifications:
● Pentium 133MHz or greater
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard” appears,
press the [Cancel] button and install USB driver.
Installing software
● Windows 98 SE/ME/2000/XP
ENG
System
Requirements.
2
Choose the language you wish to use.
3
Click [Next] in the series of windows
that appear.
● 40MB of available hard disk space
● CD-ROM drive
(double speed or greater)
● USB port (1.1) supported
● VGA graphic
● DirectX 8.0 or above
1
Insert the Installation CD into CD-ROM drive.
The picture shown below appears.
Select [yepp USB Driver].
Continued...
12
13
ENG
Connecting yepp to PC with USB cable
4
5
14
USB driver is installed with a message saying that it
is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that installation
has been successfully completed.
Upon installation of the USB driver
"SAMSUNG YP-780" will appear in the
[System Properties] → [Device Manager].
SAMSUNG YP-780 USB Device
USB connect cable
7
Windows 98/ME:
Control Panel → System → Device Manager→
Disk drives → SAMSUNG YP-780
Windows 2000:
Control Panel → System → Hardware →
Device Manager → Disk drives →
Connect the opposite end of the USB cable to the USB
cable port on the bottom of the yepp.
● If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may not
function correctly.
The power of Yepp must be turned on to connect to PC with portable disc.
If the switch on the right side of Yepp is off, please turn it “On”.
6
How to check USB driver
Plug one end of the USB cable into the
USB port on the back of the PC.
Windows XP:
Control Panel → System → Hardware →
Device Manager → Disk drives → SAMSUNG YP-780 USB Device
8
When USB driver is not Installed automatically,
refer to next page.
15
Manual Installation of USB Driver
1
Check the device manager.
2
Check if there is a device listed with
an exclamation point or a question
mark (displayed as unknown device
or USB device).
3
Windows 98,ME:
Control Panel → System → Device Manager
Windows 2000:
Control Panel → System → Hardware →
Device Manager
Windows XP:
Control Panel → System → Hardware →
Device Manager
ENG
Go to “Downloading/Uploading files” if the USB driver is in place.
Follow these steps if the USB driver is not in place :
4
After selecting the driver, click on [Update Driver].
5
Select a compatible driver, click on [Next] to finish.
Double click on the device listed with an
exclamation point or a question mark.
Continued...
16
17
ENG
Manual Installation of USB Driver
In Windows 98
Click [Next] button in the series of windows that appear.
Select [Specify a location] and then select Š
[CD-ROM]/driver for win98.
● You must reboot your computer to complete the installation.
18
19
Using the removable storage
Disconnecting the USB cable
ENG
Downloading/Uploading files
After completing the file transmission, you must disconnect the cable in the following way:
1
2
3
Connect the yepp to your PC and turn it on.
1
Open Windows Explorer on PC.
Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
2
Double-click on the green arrow in
the taskbar on the bottom right of
the window.
When the [Hardware device stopped] message appears,
press the [OK] button and disconnect the USB cable.
Notice
20
●
Music File can be played only when it is downloaded in the
MUSIC folder or the folder right below of MUSIC folder.
●
The order of music files is not relative to the replay order
when you select a Removable Disk in Windows Explorer.
●
While either DOWNLOAD or UPLOAD on the LCD of
Yepp is turned on, do not remove UBS cable. Your PC
might malfunction.
If “READY” will be displayed on the LCD of Yepp, it means
that transmission is completed. Then you can remove UBS
cable.
N
Note
●
On search engine of Windows98, put the mouse on the portable drive and click the right mouse
button to execute “Eject”.
(When “READY” is displayed on the LCD of Yepp after executing “Eject”, remove UBS cable.)
21
1
Insert the Installation CD into CD-ROM drive.
Select [yepp Studio].
2
22
3
ENG
Installing yepp Studio
Click [Next] in the series of windows that appear.
●
Please refer to Help for more information on how to use yepp Studio.
Select language
23
ENG
To View Help on yepp Studio
Run yepp Studio and press F1.
Note :
● Help will appear.
● Music recognition technology and related data are provided by Gracenote and Gracenote CDDB®
Music Recognition ServiceSM.
Move the arrow to the top of yepp Studio and right click on the mouse.
The following selection window will appear.
● Click on Help and the Help window will appear.
● CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote CDDB
logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of Gracenote. Music
Recognition Service and MRS are service marks of Gracenote.
● If a firewall is installed on the PC, it may not be possible to import CDDB information.
N
24
25
1
Insert the Installation CD into CD-ROM drive.
Select [yepp WAV Converter].
2
26
3
ENG
Installing yepp WAV Converter
Click [Next] in the series of windows that appear.
Select language
27
Convert WAV File
Press [yepp WAV Converter] in the Desktop to display WAV Converter window.
To Play File
To open the Voice file you want to convert
To convert the Voice file to the WAV file.
To delete the file opened in WAV Converter window
To check the version information
To close the WAV Converter
1
To Convert Voice File to WAV File
1
ENG
●
When the WAV Converter window appears, press the [Open] button to select the
Voice file you want.
N
When the WAV Converter window appears, press the [Open] button to select the
Voice file you want.
2
When the selected file appears, press the [Play] button.
● Press the [Pause] button to pause or [Stop] button to stop playing.
N
2
When the selected file appears, press the [Convert] button to select the folder for saving.
● The selected file will be converted to WAV file and saved in the designated folder.
N
28
N
N
29
Adjusting the Volume/Hold Function
Playing Music and Turning Off the Device
First insert batteries and connect the earphone correctly.
Playing Music
(Power On)
(Power Off)
Press the
,
ENG
Adjusting the Volume
Pausing Music
buttons to adjust the volume.
NOR
Turn on the power by pushing up the power
switch on the side of the device.
● Music and voice files can be played.
Pause playback by pressing the
● Turn off the power by pushing down the power
switch on the side of the device.
NOR
NOR
00:01:30
NOR
button.
00:01:30
vol
001
20
Note
● The volume can be adjusted in increments between 0 and 40.
● Press the
, buttons once to adjust the volume by one step.
Press and hold the
, buttons to increase or decrease the volume in greater
increments.
001
Get Original, Black Eyed
HOLD Function
00:01:30
NOR
001
GOOD BYE
Under Hold mode, buttons will not work.
Get Original, Black Eyed
Slide the
switch on the player in the
direction of the arrow.
Note :
● When a button is pressed, “
appear on the display.
HOLD!
HOLD!” message will
● WMA files can be played only as music files with a compression rate of 64Kbps-192Kbps that can be created in
Windows Media Player (Version 8.0).
● The power off time can be set in the menu.
30
31
1
2
Press the
Recording Voice
1
2
button briefly while the player is stopped.
Move to the mode you want by using the
and then press the
button.
,
buttons,
M ODE S ELECT
M ODE S ELECT
MUSIC VOICE FM
MUSIC VOICE FM
Music Mode
Voice Mode
FM
Press the
If the
M ODE S ELECT
FM LINE
ENC ENC
button is pressed again, the recording is stopped and the voice file is saved.
button is pressed, the recording is paused and if the
the recording resumes.
FM ENC Mode
button is pressed again,
M ODE S ELECT
MUSIC VOICE FM
FM Mode
LINE
button to start vioce recoding while the player is stopped.
● If the
REC
FMENC
ENG
Changing Modes
0 0 : 0 0 : 0 0 V 002
VI000002. VOC
ROCK
NOR
STOP V 0 0 3
VI000003. VOC
M ODE S ELECT
FM LINE
ENC ENC
LINE ENC Mode
Note :
● Recording is performed in order (VI000001, VI000002, etc.) and files are saved in the VOC
Note :
● You will exit from the Mode Switching function if no action is taken for 5 seconds or if
another button is pressed during mode switching.
format after recording.
● If the Memory is full, voice recording is stopped automatically.
● During vioce recording, there is no beeping sound and the button lights and backlight do not
illuminate.
● Voice Recording does not work in FM Mode or when the Line cable is connected.
32
33
ENG
Encoding MP3s
1
Connect the Audio Output port on the external audio source (or the Line Out port)
to the ENC port on the device with the Line in cable.
3
If the
button is pressed during encoding, the encoding stops and an encoding file is created.
● Encoding is performed in order (ENC000001, ENC000002, etc.)
and files are saved in the MP3 format after encoding.
Note :
● The bit rate can be set to 64Kbps, 96Kbps and 128Kbps.
● During encoding, there is no beeping sound and the button lights and backlight do not
illuminate.
2
If the
● If the
Notice :
button is pressed, MP3 encoding begins.
button is pressed, encoding is paused and if the
the encoding resumes.
button is pressed again,
● Do not disconnect the Line cable during Encoding.
● If the battery is not charged enough, encoding will not be done.
● Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
34
35
ENG
Searching for Music/Voice Files
Note :
● VBR(Variable Bit Rate) file: MP3 file
whose compression rate changes
when played.
To search for specific parts during play :
● A desired part can be searched for by pressing and
holding down the
,
buttons during play.
● With VBR files, pressing the
NOR
● If the
● If the
button is pressed during play, the next
track is played.
NOR
00:01:30
button is pressed before five seconds
have passed since starting to play a track,
the previous track is played and if the
is
pressed after five seconds, the current track is
replayed from the beginning.
001
Get Original, Black Eyed
● This player may not play back
NOR
00:01:12
P
NOR
NOR
NOR
36
To change tracks when stopped:
● If the
button within 5 seconds.
From the start of the track may not
result in the previous track playing.
MPEG1 LAYER1 files.
To change tracks during play:
00:01:12
001
23%
001
Get Original, Black Eyed
NOR
NOR
NOR
NOR
00:23:43
75%
P
00:23:43
NOR
001
NOR
001
Get Original, Black Eyed
NOR
NOR
00:00:01
00:01:30
,
buttons are pressed when
stopped, the yepp moves
to the previous or next track, respectively.
NOR
001
Girl Inside, Blues Traveler
NOR
00:00:01
STOP
NOR
002
End of the World, Cold
NOR
NOR
003
Get Original, Black Eyed
NOR
STOP
002
End of the World, Cold
001
Girl Inside, Blues Traveler
NOR
NOR
STOP
003
Get Original, Black Eyed
37
Listening to FM Radio
Manual Search for a Frequency
Automatic Search for a Frequency
● Press the
,
buttons to search manually for
the desired frequency.
FM
button.
FREQ.
99. 1 MHz
● Press and hold the
,
buttons
in order to search for and stop at
frequencies for which there is reception.
FM
Manual Storage of a Frequency
Scan
99. 1 MHz
Automatic Storage of a Frequency
Searching Stored Frequencies
1
2
Press and hold the
FM
SET
CH 02
99. 1 MHz
FM
38
button.
FREQ.
89.1 MHz
Ch
Change
FM CH2
87.5 MHz
,
buttons to move to
Ch
Change
FM CH3
87.5 MHz
● Press and hold the
FM
Note :
● To exit from FM Mode, press the
button
while in FM Mode.
● Frequencies within the range of
87.5MHz to 108MHz are automatically
selected and stored.
● Frequencies are automatically stored,
starting from 1.
button in FM mode.
Press the
button after using the
the desired channel.
● After searching manually for a desired frequency,
press the
button to select the channel in
which to save the frequency.
● When the CH channel flashes, press the
button to save the selected frequency.
ENG
While the player is stopped, select FM Mode by using the
AUTO
Note :
● You can store up to 20 frequencies.
● You can replace an existing frequency with a new one but you cannot delete a stored
frequency.
Scan
89. 1 MHz
39
1
Press the
Starting Point
button during FM reception.
Ending Point
● Encoding of the currently transmitted FM
broadcast begins.
FMENC
ENC
2
Loop Repeating
ENG
Encoding From FM Radio
Press the
00 : 00 : 50 64K
FM000001. MP3
button again.
● A file is created and the encoding stops.
● Files are saved in order of F000001,
F000002...and stop automatically when the
memory is full.
FM
While playing music files, press the
button briefly at the beginning of the loop you want to set.
FREQ.
99. 1 MHz
appears in the display.
The loop is played repeatedly.
appears in the display.
NOR
00:01:30
Press the
button briefly
again to set the end of the loop.
001
NOR
Get Original, Black Eyed
00:02:30
001
Get Original, Black Eyed
Note :
● During encoding, there is no beeping sound and the button lights and back light do not illuminate.
● Encoded file will become 64Kbps file after it is encoded to FM.
Note :
● Press the
button briefly to cancel the loop.
● Loop Repeat is automatically released if you Speed Search with the
40
,
buttons.
41
Press the
ROCK
NOR
To switch to Menu Mode, press and hold the
After moving with the
,
buttons, press the
Menu mode is cancelled if the
button is pressed.
button in Music mode to select the desired SRS mode.
00:01:30
001
NOR
Get Original, Black Eyed
00:01:30
NOR
MENU Mode
001
00:01:30
WOW
001
Get Original, Black Eyed
NOR
Get Original, Black Eyed
button while in Music/Voice Mode.
button to select the desired menu.
ENG
Setting SRS
00:01:30
NOR
001
Get Original, Black Eyed
) : You will hear 3D Stereo sound.
● TRUBASS (
) : This is a bass boost feature that adds fullness to the sound.
● WOW : This feature allows you to enjoy the SRS and Trubass features simultaneously.
● SRS (
MENU
MENU
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
MENU
MENU
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
MENU
PLAY
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
MENU
PLAY MODE EQ FOLDER PLAY
FILE SETTING EXIT
● PLAY MODE : To select track repeating mode.
Note :
● EQ : To select the desired music tones.
● Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
● FOLDER PLAY : To play only the music in the selected folder.
● This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
● FILE : To delete or format music files.
● You can set SRS functions only in Music Mode.
● SETTING : To change the advanced yepp functions.
● When not in folder playback mode, press and hold
● EXIT : To exit MENU.
to skip the next 10 songs.
Example) To move to Track 42 while Track 15 is being played, press and hold the
three times and then press the
button twice.
button
Note :
● In MENU mode, no input for 30 seconds will cancel the MENU mode.
15 N 20 N 30 N 40 N 41 N 42
42
43
Selecting the EQ mode
1
2
1
2
Select PLAY MODE in the MENU. (refer to “MENU Mode”)
Use the
,
buttons to move to the mode you
want and press the
button to select.
ENG
Selecting the Play mode
Select EQUALIZER in the MENU. (refer to “MENU Mode”)
Use the
,
buttons to move to the setting you
want (out of the 4 settings) and press the
button to select.
● Select the DBB Mode if you want to fine-tune the sound.
PLAY MODE
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
ONE
PLAY MODE
ALL
PLAY MODE
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
PLAY MODE
PLAY MODE
PLAY MODE
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
NORMAL REPEAT ONE REPEATALL SHUFFLE INTRO EXIT
3
If you want to manually adjust the equalizer, select User and Bass/Treble.
● Bass and treble can each be adjusted from 0 to 10.
EQUALIZER
NORMAL CLASS JAZZ
DBB USER EXIT
EQUALIZER
ROCK
CLASS
NORMAL CLASS JAZZ
DBB USER EXIT
EQUALIZER
ROCK
NORMAL CLASS JAZZ
DBB USER EXIT
ROCK
● NORMAL : To play all the tracks in order one time.
EQUALIZER
● REPEAT ONE : To repeat one track.
NORMAL CLASS JAZZ
DBB USER EXIT
● REPEAT ALL : To repeat all tracks.
● SHUFFLE : To play tracks at random.
USER
● INTRO : To play the first 10 seconds of each track.
BASS TREBLE
ROCK
NOR
EQUALIZER
NORMAL CLASS JAZZ
DBB USER EXIT
EQUALIZER
ROCK
NORMAL CLASS JAZZ
DBB USER EXIT
ROCK
EQUALIZER
EXIT
NORMAL CLASS JAZZ
DBB USER EXIT
ROCK
● EXIT : To move to the upper menu.
Note :
● DBB is for Dynamic Bass Booster, which enhances bass response.
44
45
1
Select Folder Play in the MENU. (refer to “MENU Mode”)
●
: This signifies the sub-folders of the Music folder; only the files in the selected sub-folder
are played when the Menu button is pressed.
●
2
Deleting
: This signifies the root folder; the files in the folder are played if the Menu button is pressed.
F
Use the
,
buttons to move to the desired folder and
press the
button to select.
ENG
Managing Files
Selecting the Play Folder
1
2
Select FILE in the MENU. (refer to “MENU Mode”)
Select DELETE and then move to the file you wish to delete.
● If GO UP is selected, files in other folders can also be selected.
● Only the files in the selected folder are played.
FOLDER PLAY
F
MUSIC
FOLDER PLAY
F
LINE_ENC
FOLDER PLAY
F
VOICE
FOLDER PLAY
F
3
Select YES in the Delete Confirm Window after pressing the
button.
● The selected file is deleted.
FM_ENC
FOLDER PLAY
FILE
EXIT
DELETE FORMAT EXIT
DEL MUSIC
MUSIC
001-Get Original, Black Ey
DEL CONFIRM
YES
NO
Note :
● You can only create sub-folders in the Music folder and folder creation is only possible in yepp Studio.
● You can move to the next folder by pressing and holding down the
button when playing a folder.
Continued...
46
47
1
2
Formatting
1
2
Select FILE in the MENU. (refer to “MENU Mode”)
ENG
Setting Advanced Functions
Select SETTING in the MENU. (refer to “MENU Mode”)
Use the
,
buttons to move to the function you want to change and select
the function by using the
button.
Select FORMAT.
SETTING
● Formatting is performed if CONFIRM is selected.
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
EREQ
FILE
DELETE
FILE
FORMAT EXIT
DELETE
FORMAT
FORMAT EXIT
CONFIRM
UNIT
SETTING
SOUND
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
SETTING
SETTING
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
SETTING
TIME
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
CANCEL
Note :
● All files are deleted if yepp is fomatted.
Continued...
48
49
DISPLAY
ENG
Select DISPLAY in the MENU.
CONTRAST
INFORMATION
● Use the
● Use the
,
buttons to select the music mode and select the content to be displayed
at the top of the Screen Display Window.
,
buttons to set the Contrast.
● The setting range of the contrast, which adjusts the
CONTRAST
brightness of the screen, is 0 to 20.
11
● Play time: Displays the current play time
INFORMATION
● Remain time: Displays the remaining play time
● Free memory: Displays the remaining memory
P.TIME
PLAY TIME REMAIN TIME
FREE MEMORY BITRATE EXIT
● Bit rate: Displays the wave bit rate that is being played
SCROLL SPEED
,
● Use the
buttons to set the Scroll Speed.
● The setting range of the scroll speed, which adjusts the
speed of the track title flow, is 0 to 10.
BACK LIGHT
,
buttons to set the
Backlight “ON” time.
● The setting range of Backlight-On Time is
0 to 30 seconds.
● Use the
SCROLL SPEED
06
LANGUAGE
BACK LIGHT
09sec
SCROLL
SPEED
● Use
,
button to select the desired file language among 10 different languages
● File information will be displayed in selected language.
● When set to Always On, the backlight stays on continuously.
Note :
● The backlight does not illuminate when the residual battery level is insufficient.
50
51
Select SOUND CONTROL in the MENU.
ENG
SOUND CONTROL
ENCODE BIT RATE
● Use the
WOW LEVEL
● The levels of SRS and TRUBASS can be adjusted.
,
buttons to select the level you want.
❃The level for SRS and TRUBASS can each be set within the range of 0 to 10.
● Use the
WOW LEVEL
ENCODE BPS
128kbps
BEEP ON/OFF
SRS LEVEL
SRS TRUBASS EXIT
,
buttons to sel the desired MP3
encoding bit rate.
● You can set the desired bit rate to 64kbps, 96kbps or
128kbps when doing MP3 encoding.
● Use the
01
,
buttons to set the BEEP mode.
● BEEP ON: A beep sounds each time a
TRUBASS LEVEL
WOW LEVEL
button is pressed.
01
SRS TRUBASS EXIT
● BEEP OFF: No beep sounds when a button is pressed.
ON
OFF
DEFAULT VOLUNE
OPTIMIZATION
● Use the
● Optimizes the SRS function to the device that’s connected.
● Set the desired device to earphone, headphone,
speaker or carpack by using the
BEEP ON/OFF
,
buttons.
EAR
OPTIMIZATION
EAR PHONE HEAD PHONE
SPEAKER CAR PACK EXIT
,
buttons to set the DEFAULT VOLUME.
● It is possible to set the default volume to a value
DEFAULT DEFAULT VOL
between 0 and 40. If the power is turned on again after
having adjusted the volume above the default value,
music is played at the default volume.
17
● If the power is turned on again after the volume was set to within the default value,
the music is replayed at the previously played volume.
52
53
TIME CONTROL
Setting the FM Frequency Unit
Select TIME CONTROL in the Menu.
INTRO TIME
● Use the
,
buttons to set the INTRO TIME.
● The intro play time can be set from 10 to 50 seconds.
The first section of each track is played for the set time.
INTRO TIME
INTRO
SCAN
10sec
POWER OFF TIME
● Use the
,
buttons to set the POWER OFF TIME.
1
2
ENG
You can set the unit of frequency movement in FM mode.
Select FM STEP in the MENU.
Use the
,
buttons to move FM step to 100KHz or 50KHz
and press the
button to select.
POW OFF TIME
● The power off time can be set from 3 to 180 seconds.
05sec
After stopping playback, the power is turned off automatically if no buttons have been pressed during the set time.
EREQ
UNIT
SETTING
DISPLAY SOUND CONTROL
TIME CONTROL FM STEP EXIT
100KHz
FM STEP FREQ
UNIT
100KHz
50KHz
EXIT
● When set to No Power Off, the power does not turn off even when the device is stopped.
SLEEP TIME
● Use the
,
buttons to set the SLEEP TIME.
● The sleep time can be set from 3 to 180 minutes.
The power turns off automatically after the set time
has passed.
SLEEP
TIME
zz
z
SLEEP TIME
15min
Note :
● When the device is turned off automatically, the power can be turned on again by pushing
the power switch down to the Off position and then pushing it back up to the On position.
54
55
ENG
MENU Table
MENU
PLAY MODE
EQUALIZER
FOLDER PLAY
NORMAL
FOLDERS
NORMAL
FILE
DELETE
CLASSIC
REPEAT ONE
SETTING
EXIT
DISPLAY
INFORMATION
YES
...
BACK LIGHT
NO
CONTRAST
JAZZ
SCROLL SPEED
EXIT
ROCK
EXIT
NORMAL DBB
CANCEL
CLASSIC DBB
SHUFFLE
LANGUAGE
CONFIRM
FORMAT
REPEAT ALL
SOUND CONTROL
EXIT
WOW LEVEL
SRS
TRUBASS
JAZZ DBB
EXIT
INTRO
ROCK DBB
OPTIMIZATION
USER
EXIT
ENCODE BITRATE
BASS
BEEP ON/OFF
TREBLE
EXIT
DEFAULT VOLUME
EXIT
EXIT
TIME CONTROL
● Use the
or
button to move and then select using the
button.
INTRO TIME
POWER OFF TIME
EXIT
SLEEP TIME
EXIT
56
57
The software doesn’t work
The buttons do not work.
● Refer to the recommended PC specifications.
● Check setting of Hold switch.
yepp does not work and the LCD displays nothing.
yepp keeps being turned off.
● Check the battery capacity
● In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings).
● Check to see if there are files saved in it.
● Check to see if the battery is inserted to the right poles
,
In PLAY mode, music is not played after pressing the
●
●
●
●
Verify that the device is currently set to Music mode.
Check to see if MP3 or WMA files are saved in the built-in memory.
Check to see if the HOLD switch is locked.
Check if the REC button is on.
● Format with the format function of the main body.
Files cannot be downloaded.
● Check to see if the driver is installed correctly in the computer.
● Check the connection between yepp and computer.
● Check and/or replace the battery, turn on the yepp's power.
button
ENG
Troubleshooting
Something’s wrong with play time displayed during Play mode.
● “VBR SONG” message is displayed while VBR (Variable Bit Rate) file is playing.
LCD window is dark
● Check Contrast
Yepp doesn’t work even though the power switch is set to On.
● Try pushing the power switch down to Off and then pushing it back up to On.
Strange characters are displayed on the screen during playback.
● Change the language setting on the menu of the main body.
Backlight does not work.
● Check the backlight setup.
● When the battery power is low, the backlight will go out.
58
59
Model
Built-in Memory capacity
Voltage
Playing time
Dimensions/Weight
Case
Noise Ratio
Earphones Jack Output Power
Output Frequency Range
Operating Temperature Range
FM Frequency
FM Signal to Noise Ratio
FM T.H.D
FM Useable Sensitiivity
File Support
60
YP-780
1GB(YP-780 Z)/512MB(YP-780 X)/256MB(YP-780 V)/128MB(YP-780 H)
1.5V x 2 (AAA/LR03 size alkaline battery)
lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 30)
45 x 73 x 17.5mm/45g (without battery)
Plastic/Aluminum
80dB with 20KHz LPF
6mW(Max 10mW)/CH (16 Ω)
20Hz~20KHz
-5 ~ +35°C(23~95°F)
87.5 ~ 108.0 MHz
45dB
1%
10dB
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA (64Kbps ~ 192Kbps, 32KHz, 44.1KHz, 48KHz)
MEMO
ENG
Specifications