User’s Guide
C46x series
BASIC
BASIC
This guide provides information concerning the installation, basic operation
and troubleshooting on windows.
ADVANCED
This guide provides information about the installation, advanced configuration, operation
and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
1. Introduction
Key benefits
5
Features by model
7
Useful to know
12
About this user’s guide
13
Safety information
14
Machine overview
19
Control panel overview
23
Turning on the machine
27
Installing the driver locally
28
Reinstalling the driver
29
2. Menu Overview and Basic Setup
Menu overview
31
Machine’s basic settings
37
Media and tray
39
Basic printing
52
Basic copying
58
Basic scanning
63
Basic faxing
64
Using USB memory device
69
3. Maintenance
Ordering supplies and accessories
75
Available supplies
76
Available maintenance parts
77
Storing the toner cartridge
78
Redistributing toner
79
Replacing the toner cartridge
81
Replacing the waste toner container
83
Replacing the imaging unit
85
Monitoring the supplies life
87
Setting the toner low alert
88
Cleaning the machine
89
Tips for moving & storing your machine
93
2
BASIC
4. Troubleshooting
Tips for avoiding paper jams
95
Clearing original document jams
96
Clearing paper jams
101
Understanding the status LED
105
Understanding display messages
107
5. Appendix
Specifications
115
Regulatory information
124
Copyright
137
3
1. Introduction
This chapter provides information you need to know before using the machine.
• Key benefits
5
• Features by model
7
• Useful to know
12
• About this user’s guide
13
• Safety information
14
• Machine overview
19
• Control panel overview
23
• Turning on the machine
27
• Installing the driver locally
28
• Reinstalling the driver
29
Key benefits
Environmentally friendly
• Fast, on-demand printing.
- For single-side black and white printing, up to 18 ppm (A4) or up to 19
ppm (Letter).
- For single-side color printing, up to 4 ppm (A4 or Letter).
Convenience
• To save toner and paper, this machine supports Eco feature (see "Eco
printing" on page 56).
• To save paper, you can print multiple pages on one single sheet of paper
(see "Using advanced print features" on page 230).
• To save paper, you can print on both sides of the paper (double-sided
printing) (Manual) (see "Using advanced print features" on page 230).
• To save electricity, this machine automatically conserves electricity by
substantially reducing power consumption when not in use.
• We recommend using recycled paper for saving energy.
Fast high resolution printing
• Simply touch your cell phone on the NFC tag on your printer and get the
print job done (see "Using the NFC feature" on page 193).
• You can print on the go from your smartphone or computer using Google
Cloud Print enabled apps (see "Google Cloud Print" on page 200).
• Easy Capture Manager allows you to easily edit and print whatever you
captured using the Print Screen key on the keyboard (see "Easy Capture
Manager" on page 260).
• Samsung Easy Printer Manager and Printing Status is a program that
monitors and informs you of the machine’s status and allows you to
customize the machine’s settings (see "Using Samsung Easy Printer
Manager" on page 267 or "Using Samsung Printer Status" on page 271).
• You can print in a full range of colors using cyan, magenta, yellow, and black.
• You can print with a resolution of up to 2,400 x 600 dpi effective output (600
x 600 x 2 bit).
• Samsung Easy Document Creator is an application to help users compile
and share large documents or other scanned or faxed information digitally.
(see "Using Samsung Easy Document Creator" on page 270).
• AnyWeb Print helps you screen-capture, preview, scrap, and print the
screen of Windows Internet Explorer more easily than when you use the
ordinary program (see "Samsung AnyWeb Print" on page 262).
Key benefits
• Smart Update allows you to check for the latest software and install the
latest version during the printer driver installation process. This is available
only for Windows.
Supports various wireless network setting method
• If you have Internet access, you can get help, support application, machine
drivers, manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or Downloads.
Wide range of functionality and application support
• Using the WPS (Wi-Fi Protected Setup™) button
- You can easily connect to a wireless network using the WPS button on
the machine and the access point (a wireless router).
• Using the USB cable or a network cable
- You can connect and set various wireless network settings using a USB
cable or a network cable.
• Supports various paper sizes (see "Print media specifications" on page 117).
• Print watermark: You can customize your documents with words, such as
“CONFIDENTIAL” (see "Using advanced print features" on page 230).
• Print posters: The text and pictures of each page of your document are
magnified and printed across the multiple sheets of paper and can then be
taped together to form a poster (see "Using advanced print features" on
page 230).
• You can print in various operating systems (see "System requirements" on
page 120).
• Your machine is equipped with a USB interface and/or a network interface.
• Using the Wi-Fi Direct
- You can conveniently print from your mobile device using the Wi-Fi or
Wi-Fi Direct feature.
See "Introducing wireless set up methods" on page 160.
Features by model
Some features and optional goods may not be available depending on model or country.
Operating System
Operating System
C46xW
C46xFW
Windows
●
●
Mac
●
●
Linux
●
●
(●: Included, Blank: Not available)
Features by model
Software
You can install the printer driver and software when you insert the software CD into your CD-ROM drive.
For Windows, select the printer driver and software in the Select Software to Install window.
Software
C46xW
C46xFW
SPL printer driver
●
●
PCL printer driver
●
●
PS printer drivera
●
●
XPS printer drivera
●
●
Samsung Easy Printer Manager Scan to PC settings
●
●
●
Fax to PC settings
●
●
Samsung Easy Document Creator
●
●
Samsung Easy Color Managera
●
●
Samsung Printer Status
●
●
AnyWeb Printa
●
●
SyncThru™ Web Service
●
●
Device Settings
Features by model
Software
C46xW
C46xFW
SyncThru Admin Web Service
●
●
Easy Eco Driver
●
●
●
Fax
Samsung Network PC Fax
Scan
Twain scan driver
●
●
WIA scan driver
●
●
a. Download the software from the Samsung website and install it: (http://www.samsung.com > find your product > Support or Downloads). Before installing, check whether your
computer’s OS support the software.
(●: Included, Blank: Not available)
Features by model
Variety feature
Features
C46xW
C46xFW
Hi-Speed USB 2.0
●
●
Network Interface Ethernet 10/100 Base TX wired LAN
●
●
Network Interface 802.11b/g/n wireless LANa
●
●
NFC printing/scanning
●
●
Google Cloud Print™
●
●
AirPrint
●
●
Eco printing (Control panel)
●
●
Duplex (2-sided) printing (Manual)b
●
●
USB memory interface
●
●
Automatic Document Feeder (ADF)
●
a. Depending on your country, wireless LAN card may not be available. For some countries, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you
bought your machine.
b. Windows only.
(●: Included, Blank: Not available)
Features by model
Features
Fax
C46xW
C46xFW
Multi-send
●
Delay send
●
Priority send
●
Secure receive
●
Send/ Receive forward - fax
●
Scan
Scan to PC
●
●
Copy
ID card copying
●
●
Reduced or enlarged copying
●
●
Collation
●
●
2-up/4-up
●
●
Adjust background
●
●
(●: Included, Blank: Not available)
Useful to know
The machine does not print.
A paper jam has occurred.
• Open the print queue list and remove the document from the
list (see "Canceling a print job" on page 53).
• Open and close the scan unit (see "Front view" on page 20).
• Remove the driver and install it again (see "Installing the driver
locally" on page 28).
• Select your machine as your default machine in your Windows
(see "Setting your machine as a default machine" on page 229).
• Check the instructions on removing jammed paper in this
manual and troubleshoot accordingly (see "Clearing paper
jams" on page 101).
Printouts are blurry.
Where can I purchase accessories or supplies?
• The toner level might be low or uneven. Shake the toner
cartridge (see "Redistributing toner" on page 79).
• Inquire at a Samsung distributor or your retailer.
• Try a different print resolution setting (see "Opening printing
preferences" on page 54).
• Visit www.samsung.com/supplies. Select your country/region
to view product service information.
The status LED flashes or remains constantly on.
• Replace the toner cartridge (see "Replacing the toner
cartridge" on page 81).
Where can I download the machine’s driver?
• Turn the product off and on again.
• Check the meanings of LED indications in this manual and
troubleshoot accordingly (see "Understanding the status LED"
on page 105).
• You can get help, support application, machine drivers,
manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or
Downloads.
About this user’s guide
This user's guide provides information for your basic understanding of the
machine as well as detailed steps to explain machine usage.
•
Do not discard this manual, and keep it for future reference.
•
Read the safety information before using the machine.
•
If you have a problem using the machine, refer to the troubleshooting
chapter.
•
2
General icons
Icon
Text
Description
Caution
Gives users information to protect the machine from
possible mechanical damage or malfunction.
Terms used in this user’s guide are explained in the glossary chapter.
•
All illustrations in this user’s guide may differ from your machine depending
on its options or model you purchased.
•
The screenshots in this administrator’s guide may differ from your machine
depending on the machine’s firmware/driver version.
•
The procedures in this user’s guide are mainly based on Windows 7.
Note
Provides additional information or detailed
specification of the machine function and feature.
1
Conventions
Some terms in this guide are used interchangeably, as below:
•
Document is synonymous with original.
•
Paper is synonymous with media, or print media.
•
Machine refers to printer or MFP.
1. Introduction
13
Safety information
These warnings and precautions are included to prevent injury to you and
others, and to prevent any potential damage to your machine. Be sure to read
and understand all of these instructions before using the machine. After reading
this section, keep it in a safe place for future reference.
4
Operating environment
Warning
3
Important safety symbols
Do not use if the power cord is damaged or if the electrical outlet is
not grounded.
Explanation of all icons and signs used in this chapter
Warning
Hazards or unsafe practices that may result in severe
personal injury or death.
Caution
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Do not attempt.
This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or
heavy objects, candles, lit cigarettes, etc.).
This could result in electric shock or fire.
• If the machine gets overheated, it releases smoke, makes
strange noises, or generates an odd odor, immediately turn off
the power switch and unplug the machine.
• The user should be able to access the power outlet in case of
emergencies that might require the user to pull the plug out.
This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
Stepping on or allowing the power cord to be crushed by a heavy
object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the
plug with wet hands.
This could result in electric shock or fire.
1. Introduction
14
Safety information
5
Caution
During an electrical storm or for a period of non-operation,
remove the power plug from the electrical outlet.
Operating method
Caution
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Do not forcefully pull the paper out during printing.
Burns could occur.
It can cause damage to the machine.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections and
request assistance from qualified service personnel.
Be careful not to put your hand between the machine and paper
tray.
Otherwise, this could result in electric shock or fire.
You may get injured.
If the machine does not operate properly after these instructions
have been followed, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
Be care when replacing paper or removing jammed paper.
Otherwise, this could result in electric shock or fire.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
Call an electrician to change the electrical outlet, or this could
result in electric shock.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
Burns can occur.
When removing jammed paper, do not use tweezers or sharp metal
objects.
It can damage the machine.
Do not allow too many papers to stack up in the paper output tray.
It can damage the machine.
This could result in electric shock or fire and/or injury to your pet.
1. Introduction
15
Safety information
Do not block or push objects into the ventilation opening.
Caution
This could result in elevated component temperatures which can
cause damage or fire.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This machine's power reception device is the power cord.
To switch off the power supply, remove the power cord from the
electrical outlet.
Before moving the machine, turn the power off and disconnect all
cords. The information below are only suggestions based on the
units weight.
If you have a medical condition that prevents you from lifting, do
not lift the machine. Ask for help, and always use the appropriate
amount of people to lift the device safely.
Then lift the machine:
•
If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
•
If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift
with 2 people.
•
If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or
more people.
6
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity, or water
leaks.
The machine could fall, causing injury or machine damage.
Choose a flat surface with enough space for ventilation to place
the machine. Also consider the space required to open the cover
and trays.
This could result in electric shock or fire.
The place should be well-ventilated and be far from direct light,
heat, and humidity.
Place the machine in the environment where it meets the
operating temperature and humidity specification. Otherwise,
quality problems can occur and cause damage to the machine (see
"General specifications" on page 115).
When using the machine for a long period of time or printing a
large number of pages in a non-ventilated space, it could pollute
the air and be harmful to your health. Place the machine in a wellventilated space or open a window to circulate the air periodically.
1. Introduction
16
Safety information
7
Do not place the machine on an unstable surface.
The machine could fall, causing injury or machine damage.
Maintenance / Checking
Use only No.26 AWGa or larger, telephone line cord, if necessary.
Otherwise, it can cause damage to the machine.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the machine, and could result
in electric shock or fire.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Do not overload wall outlets and extension cords.
This can diminish performance, and could result in electric shock
or fire.
The machine should be connected to the power level which is
specified on the label.
If you are unsure and want to check the power level you are using,
contact the electrical utility company.
Caution
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the
machine.
This could result in electric shock or fire.
When you are working inside the machine replacing supplies or
cleaning the inside, do not operate the machine.
You could get injured.
Keep cleaning supplies away from children.
Children could get hurt.
Do not disassemble, repair or rebuild the machine by yourself.
It can damage the machine. Call a certified technician when the
machine needs repairing.
To clean and operate the machine, strictly follow the user's guide
provided with the machine.
Otherwise, you could damage the machine.
a. AWG: American Wire Gauge
1. Introduction
17
Safety information
Keep the power cable and the contact surface of the plug clean
from dust or water.
When storing supplies such as toner cartridges, keep them away
from children.
Otherwise, this could result in electric shock or fire.
Toner dust can be dangerous if inhaled or ingested.
• Do not remove any covers or guards that are fastened with
screws.
For supplies that contain toner dust (toner cartridge, waste toner
bottle, imaging unit, etc.) follow the instructions below.
• Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.
• When disposing of the supplies, follow the instructions for
disposal. Refer to the reseller for disposal instructions.
• The machine should only be repaired by a Samsung service
technician.
8
Supply usage
• Do not wash the supplies.
• For a waste toner bottle, do not reuse it after emptying the
bottle.
If you do not follow the instructions above, it may cause machine
malfunction and environmental pollution. The warranty does not
cover damages caused by a user's carelessness.
Using recycled supplies, such as toner, can cause damage to the
machine.
Caution
Do not disassemble the toner cartridge.
Toner dust can be dangerous if inhaled or ingested.
Do not burn any of the supplies such as toner cartridge or fuser
unit.
This could cause an explosion or uncontrollable fire.
In case of damage due to the use of recycled supplies, a service
fee will be charged.
When toner gets on your clothing, do not use hot water to wash
it.
Hot water sets toner into fabric. Use cold water.
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
Toner dust can be dangerous if inhaled or ingested.
1. Introduction
18
Machine overview
9
Accessories
Power cord
Quick installation guide
Software CDa
Misc. accessoriesb
a. The software CD contains the print drivers, user’s guide, and software applications.
b. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.
1. Introduction
19
Machine overview
10
Front view
• This illustration may differ from your machine depending on your model.
There are various types of machine.
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
4
Front door
11
Scan unita b
5
Output support
12
USB port
6
Control panel
13
Scanner glass
7
NFC tag
a. Close the scanner lid before opening the scan unit.
b. Be careful not to pinch your fingers.
C46xW
11
1
8
7
6
12
5
4
9
13
10
3
2
1
Scanner lid
8
Toner cartridges
2
Handle
9
Waste toner container
3
Tray
10
Imaging unit
1. Introduction
20
Machine overview
C46xFW
a. Close the scanner lid before opening the scan unit.
b. Be careful not to pinch your fingers.
1
2
3
4
14
11
10
9
15
8
16
7
12
17
13
6
5
1
Document feeder cover
10
NFC tag
2
Document feeder width
guide
11
3
Document feeder input tray
12
4
Document feeder output
support
13
5
Handle
14
Scan unita b
6
Tray
15
USB port
7
Front cover
16
Scanner lid
8
Document output tray
17
Scanner glass
9
Control panel
Toner cartridge
Waste toner container
Imaging unit
1. Introduction
21
Machine overview
C46xFW
11
Rear view
6
• This illustration may differ from your machine depending on your model.
There are various types of machine.
5
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
4
3
C46xW
2
4
1
1
Rear cover
5
Telephone line socket (LINE)
2
Power receptacle
6
Extension telephone socket (EXT.)
3
USB port
4
Network port
3
2
1
1
Rear cover
3
USB port
2
Power receptacle
4
Network port
1. Introduction
22
Control panel overview
• This control panel may differ from your machine depending on its model. There are various types of control panels.
• Some features and optional goods may not be available depending on model or country (see "Features by model" on page 7).
12
C46xW
1
2
3
13
12
11
4
5
10
6
8
7
4
9
1
WPS
Configures the wireless network connection easily without a computer (see "Using the WPS button" on page 162).
2
Scan to
Switches between scan and copy mode. The Scan to LED turns on scan mode and turns off on copy mode.
3
Display screen
Shows the current status and displays prompts during an operation.
4
Arrows
Scrolls through the options available in the selected menu and increases or decreases values.
1. Introduction
23
Control panel overview
5
6
7
8
9
Menu
OK
Stop/Clear
Power/
Wakeup
Start
Opens Menu mode and scrolls through the available menus (see "Menu overview" on page 31).
Confirms the selection on the screen.
Stops an operations at any time.
Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button
for more than three seconds when the machine is in ready mode.
Starts a job.
10
Back
Sends you back to the upper menu level.
11
Status LED
Indicates the status of your machine (see "Understanding the status LED" on page 105).
Eco
Turn into eco mode to reduce toner consumption and paper usage when pc-printing and copying only (see "Eco printing" on page
56).
Direct USB
Allows you to directly print files stored on a USB memory device when it is inserted into the USB port on the front of your machine.
12
13
1. Introduction
24
Control panel overview
13
C46xFW
1
2
3
20
19
18
4
5
17
6
7
8
16
9
6
10
15
11
12
13
14
1
WPS
Configures the wireless network connection easily without a computer (see "Using the WPS button" on page 162).
2
ID Copy
Allows you to copy both sides of an ID card like a driver’s license on a single side of paper (see "ID card copying" on page 61).
3
Display screen
Shows the current status and displays prompts during an operation.
4
Copy
Switches to Copy mode.
5
Fax
Switches to Fax mode.
6
Arrows
Scrolls through the options available in the selected menu and increases or decreases values.
7
Menu
Opens Menu mode and scrolls through the available menus (see "Menu overview" on page 31).
1. Introduction
25
Control panel overview
8
OK
Confirms the selection on the screen.
9
Numeric keypad
Dials a number or enters alphanumeric characters (see "Keypad letters and numbers" on page 225).
10 Address
Book
Allows you to store frequently used fax numbers or search for stored fax numbers (see "Setting up the fax address book" on page 226).
11
Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause(-) into a fax number in edit mode (see "Redialing
the fax number" on page 250).
12
Redial/Pause
Stop/Clear
Stops an operations at any time.
13 Power/
Wakeup
Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for
more than three seconds when the machine is in ready mode.
14
Starts a job.
15
16
17
Start
On Hook Dial
Back
Scan
When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speaker phone (see
"Receiving manually in Tel mode" on page 255).
Sends you back to the upper menu level.
Switches to Scan mode.
18 Status LED
Indicates the status of your machine (see "Understanding the status LED" on page 105).
19 Eco
Turn into eco mode to reduce toner consumption and paper usage when pc-printing and copying only (see "Eco printing" on page 56).
20 Direct USB
Allows you to directly print files stored on a USB memory device when it is inserted into the USB port on the front of your machine.
1. Introduction
26
Turning on the machine
1
Connect the machine to the electricity supply first.
Turn the switch on if the machine has a power switch.
1
2
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
2
Power is turned on automatically.
For C46xW, press
(Power/Wakeup) button on the control panel.
If you want to turn the power off, press and hold
(Power/Wakeup)
button for about 3 seconds.
1. Introduction
27
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 151).
4
Follow the instructions in the installation window.
You can select the software applications in the Select Software to Install
Window.
• If you are a Mac or Linux operating systems user, refer to the "Installation
for Mac" on page 142 or "Installation for Linux" on page 144.
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
14
Windows
1
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
2
Review and accept the installation agreements in the installation
window. Then, click Next.
3
Select USB connection on the Printer Connection Type screen. Then,
click Next.
1. Introduction
28
Reinstalling the driver
If the printer driver does not work properly, follow the steps below to reinstall
the driver.
15
Windows
1
From the Start menu, select Programs or All Programs > Samsung
Printers > Uninstall Samsung Printer Software.
2
3
Follow the instructions in the installation window.
Insert the software CD into your CD-ROM drive and install the driver
again (see "Installing the driver locally" on page 28).
1. Introduction
29
2. Menu Overview and
Basic Setup
This chapter provides information about the overall menu structure and the basic setup options.
• Menu overview
31
• Machine’s basic settings
37
• Media and tray
39
• Basic printing
52
• Basic copying
58
• Basic scanning
63
• Basic faxing
64
• Using USB memory device
69
Menu overview
The control panel provides access to various menus to set up the machine or use the machine’s functions.
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Some menu names may differ from your machine depending on its options or the models.
• The menus are described in the Advanced Guide (see "Useful Setting Menus" on page 203).
1
Accessing the menu
1
2
3
4
5
6
Select the Fax, Copy, or Scan button on the control panel depending on the feature to be used.
Select
(Menu) until the menu you want appears on the bottom line of the display and press OK.
Press the arrows until the needed menu item appears and press OK.
If the setting item has sub menus, repeat step 3.
Press OK to save the selection.
Press
(Stop/Clear) to return to the ready mode.
2. Menu Overview and Basic Setup
31
Menu overview
Fax Featurea
Darkness
Normal
Dark+1- Dark+5
Light+5- Light+1
Resolution
Standard
Fine
Send Forward
Sending
Change Default
Redial Times
Resolution
Redial Term
Darkness
Forward to Fax
Prefix Dial
Original Size
Forward to PC
ECM Mode
Forward&Print
Fax Confirm.
On
Image TCR
Off
Forward to Fax
Rcv. Forward
Secure Receive
Super Fine
Off
Photo Fax
On
Original Size
Fax Setupa
Print
Dial Modeb
Receiving
Receive Mode
Multi Send
Add Page
Ring To Answer
Delay Send
Cancel Job
Stamp RCV Name
Priority Send
Auto Report
Manual TX/RX
On
Off
RCV Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Modeb
a. C46xFW only.
b. This option may not be available depending on your country.
2. Menu Overview and Basic Setup
32
Menu overview
Copy Feature
Original Size
Adjust Bkgd.
Copy Setup
Change Default
Reduce/Enlarge
Off
Original Size
Darkness
Auto
Copies
Normal
Enhance Lev.1
Copy Collation
Dark+1- Dark+5
Enhance Lev.2
Reduce/Enlarge
Light+5- Light+1
Erase Lev.1- Erase Lev.4
Darkness
Original Type
Text/Photo
Original Type
Adjust Bkgd.
Photo
Magazine
Text
Layout
Normal
2-Up
4-Up
ID Copy
2. Menu Overview and Basic Setup
33
Menu overview
Scan Feature
USB Feature
Original Size
Original Type
Resolution
Color Mode
File Format
Darkness
Scan Setup
Print Setup
Change Default
Orientation
USB Default
Portrait
Enhance
Landscape
Detailed
Copies
[1 - 999]
Resolution
Screen
Normal
Clear Text
Off
Normal
Minimum
Best
Normal
Trapping
Off
Maximum
Auto CR
Normal
LF
Maximum
LF+CR
Document Type
Emulation
Standard
Emulation Type
Photo
Setup
Biz Graphic
CAD
Web Page
2. Menu Overview and Basic Setup
34
Menu overview
System Setup
Machine Setup
Paper Setup
Report
Maintenance
Machine IDa
Paper Size
Configuration
CLR Empty Msg.c
Fax Numbera
Paper Type
Supplies Info.
Supplies Life
Margin
Demo Page
Image Mgr.
Date & Timea
Clock Modea
Language
Power Save
Auto Power Offb
Sound/Volumea
Address Booka
Custom Color
Key Sound
Fax Confirm.a
Tone Adjust.
Alarm Sound
Fax Senta
Speaker
Ringer
Fax Receiveda
Wakeup Event
Schedule Jobsa
System Timeout
Junk Faxa
Job Timeout
Network Conf.
Altitude Adj.
Usage Counter
Humidity
Fax Optionsa
Serial Number
TonerLow Alert
Auto Continue
Paper Substit.
PrintBlankPage
Eco Settings
a. C46xFW only.
b. C46xWonly
c. This option only appears when small amount of toner is left in the cartridge.
2. Menu Overview and Basic Setup
35
Menu overview
Network
TCP/IP (IPv4)
Wireless
DHCP
Wi-Fi ON/OFF
BOOTP
Wi-Fi Direct
Static
WPS Setting
TCP/IP (IPv6)
WLAN Settinga
IPv6 Activate
WLAN Default
DHCPv6 Config
WLAN Signal
Ethernet Speed
Clear Setting
Automatic
Network Conf.
10Mbps Half
Protocol Mgr.
10Mbps Full
Net. Activate
100Mbps Half
Http Activate
100Mbps Full
WINS
SNMP V1/V2
UPnP(SSDP)
MDNS
SetIP
SLP
a. C46xFW only.
2. Menu Overview and Basic Setup
36
Machine’s basic settings
• You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
3
Select the option you want, then press OK.
•
Language: change the language that is displayed on the control
panel.
•
Date & Time: When you set the time and date, they are used in delay
fax and delay print. They are printed on reports. If, however, they are
not correct, you need to change it for the correct time being.
- For Windows and Mac users, you set from Samsung Easy Printer
Manager >
(Switch to advanced mode) > Device Settings,
see "Device Settings" on page 269.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
After installation is complete, you may want to set the machine's default
settings.
To change the machine’s default settings, follow these steps:
Enter the correct time and date using arrows or numeric keypad (see
"Keypad letters and numbers" on page 225).
• Month = 01 to 12
• Day = 01 to 31
• Year = requires four digits
• Hour = 01 to 12
It may be necessary to press OK to navigate to lower-level menus for some
models.
1
2
Select
• Minute = 00 to 59
•
Clock Mode: You can set your machine to display the current time
using either a 12-hour or 24-hour format.
•
Power Save: When you are not using the machine for a while, use
this feature to save power.
(Menu) button on the control panel.
Press System Setup > Machine Setup.
2. Menu Overview and Basic Setup
37
Machine’s basic settings
• When you press the Power/Wakeup button, start printing, or a fax is
received, the product will wake up from the power saving mode.
• Press
(Menu) > System Setup > Machine Setup > Wakeup Event
> On on the control panel. When you press any button except Power/
Wakeup button, the machine wake up from the power save mode.
•
4
5
6
Altitude Adj.: Print quality is affected by atmospheric pressure,
which atmospheric pressure is determined by the height of the
machine above sea level. Before you set the altitude value,
determine the altitude where you are (see "Altitude adjustment" on
page 224).
Select the option you want, then press OK.
Press OK to save the selection.
Press
(Stop/Clear) to return to ready mode.
Refer to below links to set other settings useful for using the machine.
• See "Entering various characters" on page 225.
• See "Keypad letters and numbers" on page 225.
• See "Setting the paper size and type" on page 46.
• See "Setting up the fax address book" on page 226.
2. Menu Overview and Basic Setup
38
Media and tray
This chapter provides information on how to load print media into your
machine.
• Using print media that does not meet these specifications may cause
problems or require repairs. Such repairs are not covered by Samsung’s
warranty or service agreements.
• Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
2
Tray overview
To change the size, you need to adjust the paper guides.
1
2
3
• Using inflammable print media can cause a fire.
• Use designated print media (see "Print media specifications" on page
117).
The use of inflammable media or foreign materials left in the printer may
lead to overheating of the unit and, in rare cases may cause a fire.
4
1
2
3
4
Paper cover
Guide lock
Paper length guide
Paper width guide
If you do not adjust the guide, it may cause paper registration, image skew,
or jamming of the paper.
2. Menu Overview and Basic Setup
39
Media and tray
3
Loading paper in the tray
2
Open the paper cover.
3
Press and unlatch the guide lock in the tray, pull the tray out manually.
Then adjust the paper length guide and paper width guide.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
1
Pull out the paper tray (see "Tray overview" on page 39).
1
32
2
4
Flex or fan the edge of the paper stack to separate the pages before
loading papers.
2. Menu Overview and Basic Setup
40
Media and tray
5
Place the paper with the side you want to print facing up.
For paper longer than Legal-sized, press and unlatch the guide lock in
the tray, pull the tray out manually. Then adjust the paper length guide
and paper width guide.
1
For paper smaller than Letter-sized, press and unlatch the guide lock in
the tray, push the tray in manually. Then adjust the paper length guide
and paper width guide.
2
1
• Do not push the paper width guide too far causing the media to warp.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
• If you do not adjust the paper width guide, it may cause paper jams.
2
2. Menu Overview and Basic Setup
41
Media and tray
6
Squeeze the paper width guide and slide it to the edge of the paper stack
without causing it to bend.
7
Close the paper cover.
8
Insert the paper tray.
9
When you print a document, set the paper type and size for the tray (see
"Setting the paper size and type" on page 46).
The tray is preset to Letter or A4 size, depending on your country. To change the
size to A4 or Letter, you must adjust the lever and paper width guide properly.
2. Menu Overview and Basic Setup
42
Media and tray
Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.
2
If you want to change the size to Letter, hold the lever at the back of the
tray, and rotate the lever clockwise.
3
Squeeze the paper width guide and slide it to the edge of the lever.
A
4
1
R
LT
A
4
R
T
L
If you want to change the size to A4, first move the paper width guide to left
and rotate the lever counterclockwise. If you force the lever, it could
damage the tray.
2. Menu Overview and Basic Setup
43
Media and tray
To see paper weights for each sheet, refer to "Print media specifications" on
page 117.
4
Printing on special media
The table below shows the special media usable in tray.
The paper setting in the machine and driver should match to print without a
paper mismatch error.
To change the paper setting set in the machine, from the Samsung Easy Printer
Manager select
(Switch to advanced mode) > Device Settings.
Or if your machine supports a display screen, you can set it using the
Traya
Types
(Menu)
button on the control panel.
Then, set the paper type from the Printing preferences window > Paper tab >
Paper Type (see "Opening printing preferences" on page 54).
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 117).
• Illustrations on this user’s guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 20).
Plain
●
Thick
●
Thin
●
Bond
●
Color
●
CardStock
●
Labels
●
Preprinted
●
Cotton
●
Recycled
●
Archive
●
Glossy Photo
●
Matte Photo
●
a. The paper types available manual feeding in tray.
(●: Supported, Blank: Not supported)
2. Menu Overview and Basic Setup
44
Media and tray
Labels
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the machine.
To avoid damaging the machine, use only labels designed for use in laser
printers.
•
Do not use labels that are separating from the backing sheet or are wrinkled,
bubbled, or otherwise damaged.
Card stock/ Custom-sized paper
•
•
When selecting labels, consider the following factors:
-
Adhesives: Should be stable at your machine’s fusing temperature
about 170°C (338°F).
-
Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets that have spaces between the labels, causing
serious jams.
-
Curl: Must lie flat with no more than 13 mm of curl in any direction.
-
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
•
In the software application, set the margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can cause
paper jams. Exposed adhesive can also cause damage to machine
components.
2. Menu Overview and Basic Setup
45
Media and tray
Preprinted paper
5
Setting the paper size and type
When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
• The paper setting in the machine and driver should match to print
without a paper mismatch error.
To change the paper setting set in the machine, from the Samsung Easy
Printer Manager select
(Switch to advanced mode) > Device
Settings.
Or if your machine supports a display screen, you can set it using the
(Menu) button on the control panel.
•
Then, set the paper type from the Printing preferences window >
Paper tab > Paper Type (see "Opening printing preferences" on page
54).
Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second (about 170°C (338°F)).
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
1
2
3
4
Select
(Menu) button on the control panel.
Press System Setup > Paper Setup > Paper Size or Paper Type.
Select the tray and the option you want.
Press OK to save the selection.
2. Menu Overview and Basic Setup
46
Media and tray
5
Press
(Stop/Clear) to return to ready mode.
• If you want to use special-sized paper such as billing paper, select the
Paper tab > Size > Edit... and set Custom Paper Size Settings in the
Printing Preferences (see "Opening printing preferences" on page 54).
6
Using the output support
The surface of the output tray may become hot if you print a large number
of pages at once. Make sure that you do not touch the surface, and do not
allow children near it.
The printed pages stack on the output support, and the output support will help
the printed pages to align. The printer sends output to the output tray by
default.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
2. Menu Overview and Basic Setup
47
Media and tray
7
8
Preparing originals
•
Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than
216 x 356 mm (8.5 x 14 inches).
•
Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
-
Carbon-paper or carbon-backed paper
-
Coated paper
-
Onion skin or thin paper
-
Wrinkled or creased paper
-
Curled or rolled paper
-
Torn paper
•
Remove all staples and paper clips before loading.
•
Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
•
Do not load originals that include different sizes or weights of paper.
•
Do not load booklets, pamphlets, transparencies, or documents with other
unusual characteristics.
Loading originals
You can use the scanner glass or the document feeder to load an original for
copying, scanning, and sending a fax.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
On the scanner glass
Using the scanner glass, you can copy or scan originals. You can get the best
scan quality, especially for colored or gray-scaled images. Make sure that no
originals are in the document feeder. If an original is detected in the document
feeder, the machine gives it priority over the original on the scanner glass.
2. Menu Overview and Basic Setup
48
Media and tray
1
Lift and open the scanner lid.
2
Place the original face down on the scanner glass. Align it with the
registration guide at the top left corner of the glass.
3
Close the scanner lid.
2. Menu Overview and Basic Setup
49
Media and tray
• Leaving the scanner lid open while copying may affect copy quality and
toner consumption.
• Dust on the scanner glass may cause black spots on the printout. Always
keep it clean (see "Cleaning the machine" on page 89).
In the document feeder
1
Flex or fan the edge of the paper stack to separate the pages before
loading originals.
2
Load the original face up into the document feeder input tray. Make sure
that the bottom of the original stack matches the paper size marked on
the document input tray.
• If you are copying a page from a book or magazine, lift the scanner lid
until its hinges are caught by the stopper and then close the lid. If the
book or magazine is thicker than 30 mm, start copying with the scanner
lid open.
• Be careful not to break the scanner glass. You may get hurt.
• Do not put hands while closing the scanner lid. The scanner lid may fall
on your hands and get hurt.
• Do not look into the light from inside of the scanner while copying or
scanning. It is harmful to eyes.
2. Menu Overview and Basic Setup
50
Media and tray
3
Adjust the document feeder width guides to the paper size.
Dust on the document feeder glass may cause black lines on the printout.
Always keep the glass clean (see "Cleaning the machine" on page 89).
2. Menu Overview and Basic Setup
51
Basic printing
For special printing features, refer to the Advanced Guide (see "Using
advanced print features" on page 230).
3
Select your machine from the Select Printer list.
4
The basic print settings including the number of copies and print range
are selected within the Print window.
9
Printing
If you are a Mac or Linux operating systems user, refer to the Advanced
Guide (see "Mac printing" on page 237 or "Linux printing" on page 239).
The following Printing Preferences window is for Notepad in Windows 7.
1
2
Open the document you want to print.
Select Print from the File menu.
To take advantage of the advanced printing features, click Properties or
Preferences from the Print window (see "Opening printing preferences" on
page 54).
5
To start the print job, click OK or Print in the Print window.
2. Menu Overview and Basic Setup
52
Basic printing
10
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as
follows:
•
You can access this window by simply double-clicking the machine icon
(
•
) in the Windows task bar.
You can also cancel the current job by pressing
(Stop/Clear) on the
control panel.
2. Menu Overview and Basic Setup
53
Basic printing
11
Opening printing preferences
4
Click Properties or Preferences.
• The Printing Preferences window that appears in this user’s guide may
differ depending on the machine in use.
• When you select an option in Printing Preferences, you may see a
warning mark
or . An
mark means you can select that certain
option but it is not recommended, and an
mark means you cannot
select that option due to the machine’s setting or environment.
1
2
3
Open the document you want to print.
Select Print from the file menu. The Print window appears.
Select your machine from the Select Printer.
• You can apply Eco features to save paper and toner before printing (see
"Easy Eco Driver" on page 263).
• You can check the machine’s current status pressing the Printer Status
button (see "Using Samsung Printer Status" on page 271).
2. Menu Overview and Basic Setup
54
Basic printing
Using a favorite setting
To use a saved setting, select it in the Favorites tab. The machine is now set
to print according to the settings you have selected.
The Favorites option, which is visible on each preferences tab except for the
Samsung tab, allows you to save the current preferences for future use.
To delete saved settings, select it in the Favorites tab and click Delete.
To save a Favorites item, follow these steps:
1
2
Change the settings as needed on each tab.
12
Using help
Enter a name for the item in the Favorites input box.
Click the option you want to know on the Printing Preferences window and
press F1 on your keyboard.
3
4
5
Click Save.
Enter name and description, and then select the desired icon.
Click OK. When you save Favorites, all current driver settings are saved.
2. Menu Overview and Basic Setup
55
Basic printing
Setting Eco mode on the control panel
13
Eco printing
The Eco function cuts toner consumption and paper usage. The Eco function
allows you to save print resources and lead you to eco-friendly printing.
If you press the Eco button from the control panel, eco mode is enabled. The
default setting of Eco mode is Multiple Pages per Side (2) and Toner Save.
Some features may not be available depending on the model.
1
Select
(Menu) > System Setup > Machine Setup > Eco Settings on
the control panel.
2
Select the option you want and press OK.
•
• You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
Default Mode: Select this to turn on or off the eco mode.
-
Off: Set the eco mode off.
-
On: Set the eco mode on.
If you set the eco mode on with a password from the SyncThru™ Web
Service (Settings tab > Machine Settings > System > Eco Settings) or
Samsung Easy Printer Manager (Device Settings > Eco), the On force
message appears. You have to enter the password to change the eco mode
status.
- For Windows and Mac users, you set from Samsung Easy Printer
Manager >
(Switch to advanced mode) > Device Settings,
see "Device Settings" on page 269.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
•
3
Select Temp.: Follow the settings from Syncthru™ Web Service or
Samsung Easy Printer Manager. Before you select this item, you
must set the eco function in SyncThru™ Web Service (Settings tab >
Machine Settings > System > Eco Settings) or Samsung Easy
Printer Manager (Device Settings > Eco).
-
Default Eco: The machine is set to Default Eco mode.
-
Custom Eco: Change any necessary values.
Press OK to save the selection.
2. Menu Overview and Basic Setup
56
Basic printing
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see the eco image (
means the eco mode is currently enabled.
•
), that
The actual amount displayed is only an estimate as the actual amount may
differ depending on the operating system used, computing performance,
application software, connection method, media type [thickness], media
size, job complexity, etc.
Eco options
•
Printer Default: Follows the settings from the machine's control panel.
•
None: Disables Eco mode.
•
Eco Printing: Enables eco mode. Activate the various Eco items you want to
use.
•
Password: If the administrator fixed to enable the Eco mode, you have to
enter the password to change the status.
Result simulator
Result Simulator shows the results of reduced emission of carbon dioxide, used
electricity, and the amount of saved paper in accordance with the settings you
selected.
•
The results are calculated on the basis that the total number of printed
paper is one hundred without a blank page when the Eco mode is disabled.
•
Refers to the calculation coefficient about CO2, energy, and paper from IEA,
the index of Ministry of Internal Affairs and Communication of Japan and
www.remanufacturing.org.uk. Each model has a different index.
•
The power consumption in printing mode refers to the average printing
power consumption of this machine.
2. Menu Overview and Basic Setup
57
Basic copying
For special printing features, refer to the Advanced Guide (see "Copy" on
page 206).
If you need to cancel the copying job during the operation, press
(Stop/
Clear) and the copying will stop.
14
15
Basic copy
1
Changing the settings for each copy
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select
(copy) on the control panel.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
3
If you want to customize the copy settings including Reduce/Enlarge,
Darkness, Contrast, Original Type, and more by using the control
panel buttons (see "Changing the settings for each copy" on page 58).
4
Enter the number of copies using the arrow or number keypad, if
necessary.
5
Press
Your machine provides default settings for copying so that you can quickly and
easily make a copy.
• If you press the
(Stop/Clear) button twice while setting the copy
options, all of the options you have set for the current copy job will be
canceled and returned to their default status. Or, they will automatically
return to their default status after the machine completes the copy in
progress.
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for
some models.
(Start).
2. Menu Overview and Basic Setup
58
Basic copying
Darkness
If you have an original containing faint marking and dark images, you can adjust
the brightness to make a copy that is easier to read.
1
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select
2
3
Select
(copy) on the control panel.
Press
(Stop/Clear) to return to ready mode.
Original
The original setting is used to improve the copy quality by selecting the
document for the current copy job.
1
Select the option you want and press OK.
Press
Select the option you want and press OK.
(Menu) > Copy Feature > Darkness on the control panel.
For example, the Light+5 being the lightest, and the Dark+5 being the
darkest.
4
3
4
(Stop/Clear) to return to ready mode.
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select
2
3
Select
(copy) on the control panel.
(Menu) > Copy Feature > Original Type on the control panel.
Select the option you want and press OK.
•
Text: Use for originals containing mostly text.
Darkness
•
Text/Photo: Use for originals with mixed text and photographs.
The Darkness menu lets you increase or decrease the difference between the
bright and dark areas of an image.
If texts in the printout is blurry, select Text to get the clear texts.
1
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select
2
Select
(copy) on the control panel.
(Menu) > Copy Feature > Darkness on the control panel.
4
•
Photo: Use when the originals are photographs.
•
Magazine: Use when the originals are magazine.
Press
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
59
Basic copying
Reduced or enlarged copy
To scale the copy by directly entering the scale rate
C46xW: Make sure that the Scan to button’s LED is off.
You can reduce or enlarge the size of a copied image from 25% to 400% from the
document feeder or scanner glass.
1
• This feature may not be available depending on model or optional goods
(see "Variety feature" on page 10).
2
Select
(Menu) > Copy Feature > Reduce/Enlarge > Custom on the
control panel.
3
4
5
Enter the copy size you want using the numeric keypad.
• If the machine set to Eco mode, reduce and enlarge features are not
available.
To select from the predefined copy sizes
1
C46xFW: Select
(copy) on the control panel.
Press OK to save the selection.
Press
(Stop/Clear) to return to ready mode.
C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select
(copy) on the control panel.
2
Select
panel.
3
4
Select the option you want and press OK.
Press
When you make a reduced copy, black lines may appear at the bottom of
your copy.
(Menu) > Copy Feature > Reduce/Enlarge on the control
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
60
Basic copying
16
ID card copying
3
4
Press
(Start).
Your machine begins scanning the front side and shows Place Back Side
and Press [Start].
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
Place Front Side and Press [Start] appears on the display.
5
Turn the original over and place it on the scanner glass where arrows
indicate as shown. Then, close the scanner lid.
6
Press
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may differ.
1
2
Press ID Copy on the control panel.
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
(Start) button.
2. Menu Overview and Basic Setup
61
Basic copying
• If you do not press the
copied.
(Start) button, only the front side will be
• If the original is larger than the printable area, some portions may not be
printed.
2. Menu Overview and Basic Setup
62
Basic scanning
For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 241).
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC Settings.
17
Basic Scanning
3
Select the scan destination you want and press OK.
Default setting is My Documents.
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
• To change the Samsung Easy Printer Manager >
advanced mode > Scan to PC Settings.
• If you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 242).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
C46xFW: Select
(scan) > Scan to PC > Local PC on the control panel.
OR
Switch to
4
5
Select the option you want and press OK.
Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
C46xW: Press Scan to > Scan to PC > Local PC on the control panel.
2. Menu Overview and Basic Setup
63
Basic faxing
18
• C46xFW only.
Preparing to fax
• For special faxing features, refer to the Advanced Guide (see "Fax
features" on page 250).
• You cannot use this machine as a fax via the internet phone. For more
information ask your internet service provider.
• We recommend using traditional analog phone services (PSTN: Public
Switched Telephone Network) when connecting telephone lines to use
a fax machine. If you use other Internet services (DSL, ISDN, VolP), you can
improve the connection quality by using the Micro-filter. The Micro-filter
eliminates unnecessary noise signals and improves connection quality or
Internet quality. Since the DSL Micro-filter is not provided with the
machine, contact your Internet service provider for use on DSL Microfilter.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
(see "Rear view" on page 22).
Before you send or receive a fax, you need to connect the supplied line cord to
your telephone wall jack (see "Rear view" on page 22). Refer to the Quick
Installation Guide how to make a connection. The method of making a
telephone connection is different from one country to another.
19
Sending a fax
When you place the originals, you can use either the document feeder or
the scanner glass. If the originals are placed on both the document feeder
and the scanner glass, the machine will read the originals on the document
feeder first, which has higher priority in scanning.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
3
Select
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 67).
2. Menu Overview and Basic Setup
64
Basic faxing
4
Enter the destination fax number (see "Keypad letters and numbers" on
page 225).
Sending a fax manually
5
Press
(Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
Perform the following to send a fax using
panel.
• If you want to send a fax directly from your computer, use Samsung
Network PC Fax (see "Sending a fax in the computer" on page 251).
• When you want to cancel a fax job, press
machine starts transmission.
(On Hook Dial) on the control
If your machine is a handset model, you can send a fax using the handset
(see "Variety feature" on page 10).
(Stop/Clear) before the
• If you used the scanner glass, the machine shows the message asking to
place another page.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
3
Select
4
5
6
Press
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 67).
(On Hook Dial) on the control panel or lift the handset.
Enter a fax number using the number keypad on the control panel.
Press
(Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.
2. Menu Overview and Basic Setup
65
Basic faxing
Sending a fax to multiple destinations
7
You can use the multiple send feature, which allows you to send a fax to multiple
locations. Originals are automatically stored in memory and sent to a remote
station. After transmission, the originals are automatically erased from memory.
You cannot send faxes with this feature if you have chosen super fine as an
option or if the fax is in color.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
3
Select
4
5
Select
To enter more fax numbers, press OK when Yes appears and repeat
steps 5 and 6.
• You can add up to 10 destinations.
• Once you have entered a group dial number, you cannot enter another
group dial number.
8
When you have finished entering fax numbers, select No at the Another
No.? prompt and press OK.
The machine begins sending the fax to the numbers you entered in the
order in which you entered them.
Multi send report is printed after sending faxes.
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 67).
(Menu) > Fax Feature > Multi Send on the control panel.
Enter the number of the first receiving fax machine and press OK.
You can press speed dial numbers or select a group dial number using
the
6
(Address book) button.
Enter the second fax number and press OK.
The display asks you to enter another fax number to send the document.
2. Menu Overview and Basic Setup
66
Basic faxing
20
Receiving a fax
Your machine is preset Fax mode at the factory. When you receive a fax, the
machine answers the call on a specified number of rings and automatically
receives the fax.
1
Select
panel.
(fax) >
(Menu) > Fax Feature > Resolution on the control
2
Select the option you want and press OK.
•
Standard: Originals with normal sized characters.
•
Fine: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
•
Super Fine: Originals containing extremely fine detail. Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
21
Adjusting the document settings
Before starting a fax, change the following settings according to your original’s
status to get the best quality.
• For memory transmission, Super Fine mode is not available. The
resolution setting is automatically changed to Fine.
• When your machine is set to Super Fine resolution and the fax machine
with which you are communicating does not support Super Fine
resolution, the machine transmits using the highest resolution mode
supported by the other fax machine.
It may be necessary to press OK to navigate to lower-level menus for some
models.
Resolution
The default document settings produce good results when using typical textbased originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
•
3
Photo Fax: Originals containing shades of gray or photographs.
Press
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
67
Basic faxing
Darkness
You can select the degree of darkness of the original document.
The darkness setting is applied to the current fax job. To change the default
setting (see "Fax" on page 209).
1
Select
panel.
2
3
Select a darkness level you want.
Press
(fax) >
(Menu) > Fax Feature > Darkness on the control
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
68
Using USB memory device
This chapter explains how to use a USB memory device with your machine.
23
Plugging in a USB memory device
22
About USB memory
Lift the scanner lid slightly and insert your USB memory device into the USB
memory port. Close the scanner lid again before using the device.
USB memory devices are available with a variety of memory capacities to give
you more room for storing documents, presentations, downloaded music and
videos, high resolution photographs or whatever other files you want to store or
move.
You can do the following tasks on your machine by using a USB memory device.
•
Scan documents and save them on a USB memory device
•
Print data stored on a USB memory device
•
Restore backup files to the machine’s memory
•
Format the USB memory device
•
Check the available memory space
The USB memory port on the front of your machine is designed for USB V1.1 and
USB V2.0 memory devices. Your machine supports USB memory devices with
FAT16/FAT32 and a sector size of 512 bytes.
Check your USB memory device’s file system from your dealer.
2. Menu Overview and Basic Setup
69
Using USB memory device
You must use only an authorized USB memory device with an A plug connector.
24
Scanning to a USB memory device
A
B
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31)
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Use only a metal-shielded USB memory device.
You can scan a document and save the scanned image onto a USB memory
device.
Only use a USB memory device that has obtained compatibility certification;
otherwise, the machine might not recognize it.
• Do not remove the USB memory device while the machine is in operation
or writing to or reading from USB memory. The machine warranty does
not cover damage caused by user’s misuse.
• If your USB memory device has certain features such as security settings
and password settings, your machine may not automatically detect it.
For details about these features, see the user’s guide of the USB memory
device.
Scanning
1
2
Insert a USB memory device into the USB memory port on your machine.
3
Select
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
(scan) > Scan To USB > OK on the control panel.
The machine begins scanning.
To scan multiple pages, select Yes while Another Page? Yes/No appears. After
scanning is complete, you can remove the USB memory device from the
machine.
2. Menu Overview and Basic Setup
70
Using USB memory device
Customizing Scan to USB
25
Printing from a USB memory device
You can specify image size, file format, or color mode for each scanning to USB
job.
1
2
3
4
5
Select
(scan) >
control panel.
(Menu) > Scan Feature > USB Feature on the
You can directly print files stored on a USB memory device.
File is supported by Direct Print option.
•
Select the setting option you want appears.
•
Original Size: Sets the image size.
•
Original Type: Sets the original document’s.
•
Resolution: Sets the image resolution.
•
Color Mode: Sets the color mode. If you select Mono in this option,
you cannot select JPEG in File Format.
•
File Format: Sets the file format in which the image is to be saved. If
you select JPEG in this option, you cannot select Mono in Color
Mode.
•
Darkness: Sets the brightness level to scan an original.
Select the desired status you want and press OK.
PRN: Only files created by provided driver with your machine are
compatible.
If you print PRN files created from other machine, the printout would be
different.
•
TIFF: TIFF 6.0 Baseline
•
JPEG: JPEG Baseline
•
PDF: PDF 1.7 or lower version
To print a document from a USB memory device
1
Insert a USB memory device into the USB memory port on your machine,
and then press Direct USB.
2
Select USB Print.
Repeat steps 2 and 3 to set other setting options.
Press
(Stop/Clear) to return to ready mode.
You can change the default scan settings. Refer to the Advanced Guide.
2. Menu Overview and Basic Setup
71
Using USB memory device
3
Select the folder or file you want and press OK.
If you see [+] or [D] in the front of a folder name, there are one or more
files or folders in the selected folder.
4
5
Select the number of copies to be printed or enter the number.
26
Managing USB memory
You can delete image files stored on a USB memory device one by one or all at
once by reformatting the device.
Press OK, Start or Print to start printing the selected file.
If you see [+] or [D] in the front of a folder name, there are one or more files
or folders in the selected folder.
After printing the file, the display asks if you want to print another job.
6
Press OK when Yes appears to print another job, and repeat from step 2.
Otherwise, press the left/right arrow to select No and press OK.
7
Press
After deleting files or reformatting a USB memory device, files cannot be
restored. Therefore, confirm that you no longer need the data before
deleting it.
(Stop/Clear) to return to ready mode.
Deleting an image file
1
Insert a USB memory device into the USB memory port on your machine,
and then press Direct USB.
2
3
4
5
Select File Manage > Delete and press OK.
Select the file you want to delete and press OK.
Select Yes.
Press
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
72
Using USB memory device
Formatting a USB memory device
1
Insert a USB memory device into the USB memory port on your machine,
and then press Direct USB.
2
3
4
Select File Manage > Format and press OK.
Select Yes.
Press
(Stop/Clear) to return to ready mode.
Viewing the USB memory status
You can check the amount of memory space available for scanning and saving
documents.
1
Insert a USB memory device into the USB memory port on your machine,
and then press Direct USB.
2
3
4
Select Check Space.
The available memory space appears on the display.
Press
(Stop/Clear) to return to ready mode.
2. Menu Overview and Basic Setup
73
3. Maintenance
This chapter provides information about purchasing supplies, accessories and maintenance parts available for your
machine.
• Ordering supplies and accessories
75
• Available supplies
76
• Available maintenance parts
77
• Storing the toner cartridge
78
• Redistributing toner
79
• Replacing the toner cartridge
81
• Replacing the waste toner container
83
• Monitoring the supplies life
87
• Setting the toner low alert
88
• Cleaning the machine
89
• Tips for moving & storing your machine
93
Ordering supplies and accessories
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and maintenance parts.
To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine.
You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service.
3. Maintenance
75
Available supplies
When supplies reach the end of their life spans, you can order the followings of supplies for your machine:
Average yielda
Type
Toner cartridge
Part name
• Average continuous black cartridge yield: Approx. 1,500 standard pages (Black)
• K406 (CLT-K406S): Black
• Average continuous color cartridge yield: Approx. 1,000 standard pages (Yellow/Magenta/Cyan)
• C406 (CLT-C406S): Cyan
• M406 (CLT-M406S): Magenta
• Y406 (CLT-Y406S): Yellow
Imaging unit
Approx. 16,000 imagesb
CLT-R406
Waste toner container
Approx. 7,000 imagesb
CLT-W406
a. Declared yield value in accordance with ISO/IEC 19798. The number of pages may be affected by operating environment, printing interval, graphics, media type and media size.
b. Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
Depending on the options, percentage of image area and job mode used, the toner cartridge’s lifespan may differ.
When purchasing new toner cartridges or other supplies, these must be purchased in the same country as the machine you are using. Otherwise, new toner
cartridges or other supplies will be incompatible with your machine due to different configurations of toner cartridges and other supplies according to the specific
country conditions.
Samsung does not recommend using non-genuine Samsung toner cartridge such as refilled or remanufactured toner. Samsung cannot guarantee non-genuine
Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine’s
warranty.
3. Maintenance
76
Available maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service
provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its
“Average yield”.
Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which
is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met.
Average yielda
Parts
Fuser unit
Approx. 20,000 black pages or 5,000 color pages
Transfer roller
Approx. 20,000 pages
Feed roller
Approx. 20,000 pages
Pickup roller
Approx. 20,000 pages
Intermediate Transfer Belt (ITB)
Approx. 20,000 pages for black and white mode or 5,000 pages for color mode
ADF Feed rollerb
Approx. 20,000 pages
ADF Rubber Padb
Approx. 20,000 pages
a. It will be affected by the operating system used, computing performance, application software, connecting method, media type, media size and job complexity.
b. C46xFW only.
3. Maintenance
77
Storing the toner cartridge
Toner cartridges contain components that are sensitive to light, temperature
and humidity. Samsung suggests users follow these recommendations to
ensure optimal performance, highest quality, and longest life from your new
Samsung toner cartridge.
Store this cartridge in the same environment in which the printer will be used.
This should be in controlled temperature and humidity conditions. The toner
cartridge should remain in its original and unopened package until installation
– if original packaging is not available, cover the top opening of the cartridge
with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful shelf
and operating life. Do not store on the floor. If the toner cartridge is removed
from the printer, follow the instructions below to store the toner cartridge
properly.
•
Store the cartridge inside the protective bag from the original package.
•
Store lying flat (not standing on end) with the same side facing up as if it
were installed in the machine.
•
Do not store consumables in any of the following conditions:
-
Temperature greater than 40°C (104°F).
-
Humidity range less than 20% or greater than 80%.
-
An environment with extreme changes in humidity or temperature.
-
Direct sunlight or room light.
-
Dusty places.
-
A car for a long period of time.
-
An environment where corrosive gases are present.
-
An environment with salty air.
1
Handling instructions
•
Do not expose the cartridge to unnecessary vibrations or shock.
2
Toner cartridge usage
Samsung Electronics does not recommend or approve the use of non-Samsung
brand toner cartridges in your printer including generic, store brand, refilled, or
remanufactured toner cartridges.
Samsung’s printer warranty does not cover damage to the machine caused
by the use of a refilled, remanufactured, or non-Samsung brand toner
cartridges.
3
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the
amount of toner that print jobs require. The actual print yield may vary
depending on the print density of the pages you print on, operating
environment, percentage of image area, printing interval, media type and/or
media size. For example, if you print a lot of graphics, the consumption of the
toner is higher and you may need to change the cartridge more often.
3. Maintenance
78
Redistributing toner
When the toner cartridge is near the end of its life:
•
White streaks or light printing occurs and/or density varies from side to side.
•
The Status LED blinks red. The toner-related message saying that the toner is low may appear on the display.
•
The computer’s Samsung Printing Status program window appears on the computer telling you which color cartridge is low on toner (see "Using Samsung
Printer Status" on page 271).
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still
occur even after you have redistributed the toner.
Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• When opening a scan unit, hold the document feeder and scan unit together.
• Printing even after the toner empty status can cause serious damage to your machine.
3. Maintenance
79
Redistributing toner
3. Maintenance
80
Replacing the toner cartridge
Click this link to open an animation about replacing a toner cartridge.
• Shake the toner cartridge thoroughly, it will increase the initial print quality.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• When opening a scan unit, hold the document feeder and scan unit together.
• Printing even after the toner empty status can cause serious damage to your machine.
3. Maintenance
81
Replacing the toner cartridge
When a toner cartridge has reached the end of life, the Printing Status window appears on the computer, indicating the toner cartridge needs to be placed.
3. Maintenance
82
Replacing the waste toner container
When the life span of the waste toner container has expired, waste toner container-related message appears on the screen display of the control panel, indicating
the waste toner container needs to be replaced. Check the waste toner container for your machine (see "Available supplies" on page 76). For information about
installing the waste toner container, refer to the waste toner container installation guide included on the package.
• Toner particles can be released inside the machine but it does not mean the machine is damaged. Contact a service representative when print quality problems
occur.
• When you pull out the waste toner container out of the machine, move the container carefully not to drop it from your hands.
• Make sure that you lay the waste toner container on a flat surface so that the toner does not spill.
Do not tilt or turn over the container.
3. Maintenance
83
Replacing the waste toner container
3. Maintenance
84
Replacing the imaging unit
When the life span of the imaging unit has expired, the Printing Status window appears on the computer, indicating the imaging unit needs to be placed. Otherwise,
your machine stops printing.
• Don’t use sharp objects such as a knife or scissors to open the imaging unit package. You could damage the surface of the imaging unit.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
• Before closing the front cover, make sure all toner cartridges are installed properly.
3. Maintenance
85
Replacing the imaging unit
3. Maintenance
86
Monitoring the supplies life
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if
necessary.
It may be necessary to press OK to navigate to lower-level menus for some models.
1
2
3
Select
(Menu) > System Setup > Maintenance > Supplies Life on the control panel.
Select the option you want and press OK.
•
Total: Displays the total number of pages printed.
•
ADF Scan: Displays the number of pages printed by using the document feeder.
•
Platen Scan: Displays the number of pages scanned by using scanner glass.
•
Supplies Info.: Prints the supply information page.
Press
(Stop/Clear) to return to ready mode.
3. Maintenance
87
Setting the toner low alert
If the amount of toner in the cartridge is low, a message or LED informing the user to change the toner cartridge appears. You can set the option for whether or not
this message or LED appears.
• You can set the machine’s settings by using the Device Settings in Samsung Easy Printer Manager program.
- For Windows and Mac users, you set from Samsung Easy Printer Manager >
page 269.
(Switch to advanced mode) > Device Settings, see "Device Settings" on
• It may be necessary to press OK to navigate to lower-level menus for some models.
1
2
3
Select
(Menu) > System Setup > Maintenance > TonerLow Alert on the control panel.
Select the option you want.
Press OK to save the selection.
3. Maintenance
88
Cleaning the machine
If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing
condition and use your machine longer.
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the
cabinet.
• If your machine or the surrounding area is contaminated with toner, we recommend you use a cloth or tissue dampened with water to clean it. If you use a vacuum
cleaner, toner blows in the air and might be harmful to you.
4
Cleaning the outside
Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.
3. Maintenance
89
Cleaning the machine
5
Cleaning the inside
During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks
or smearing. Cleaning the inside of the machine clears and reduces these problems.
• To prevent damage to the imaging unit, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the imaging unit. Use the handle on the imaging unit to avoid touching this area.
• Use a dry lint free cloth when cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such
as benzene or thinner. Printing quality problems can occur and cause damage to the machine.
• Use a dry lint-free cloth to clean the machine.
• Turn the machine off and unplug the power cord. Wait for the machine to cool down. If your machine has a power switch, turn the power switch off before
cleaning the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• When opening a scan unit, hold the document feeder and scan unit together.
3. Maintenance
90
Cleaning the machine
1
2
1
2
3. Maintenance
91
Cleaning the machine
6
Cleaning the scan unit
3
Keeping the scan unit clean helps ensure the best possible copies. We suggest
that you clean the scan unit at the start of each day and during the day as
needed.
Wipe the surface of the scanner until it is clean and dry.
1
3
2
• Turn the machine off and unplug the power cord. Wait for the machine
to cool down. If your machine has a power switch, turn the power switch
off before cleaning the machine.
4
5
• Illustrations on this user’s guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 20).
1
2
Slightly dampen a soft, lint-free cloth or paper towel with water.
1
2
3
4
5
Lift and open the scanner lid.
4
White bar
Document feeder glass
White sheet
Scanner lid
Scanner glass
Close the scanner lid.
3. Maintenance
92
Tips for moving & storing your machine
•
When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to
the machine or reduce print quality.
•
When moving the machine, make sure at least two people are holding the machine securely.
3. Maintenance
93
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Tips for avoiding paper jams
95
• Clearing original document jams
96
• Clearing paper jams
101
• Understanding the status LED
105
• Understanding display messages
107
This chapter gives helpful information for what to do if you encounter an error. If your machine
has a display screen, check the message on the display screen first to solve the error.
If you cannot find a solution to your problem in this chapter, refer to the Troubleshooting
chapter in the Advanced Guide (see "Troubleshooting" on page 276).
If you cannot find a solution in the User's Guide or the problem persists, call for service.
Tips for avoiding paper jams
By selecting the correct medias, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines:
•
Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 39).
•
Do not remove paper from the tray while your machine is printing.
•
Flex, fan, and straighten paper before loading.
•
Do not use creased, damp, or highly curled paper.
•
Do not mix papers in a tray.
•
Use only recommended print media (see "Print media specifications" on page 117).
4. Troubleshooting
95
Clearing original document jams
When an original document jams in the document feeder, a warning message appears on the display.
To avoid tearing the document, remove the jammed document slowly and carefully.
To prevent document jams, use the scanner glass for thick, thin or mixed paper- originals.
4. Troubleshooting
96
Clearing original document jams
1
Original paper jam in front of scanner
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• This troubleshooting may not be available depending on model or optional goods (see "Variety feature" on page 10).
4. Troubleshooting
97
Clearing original document jams
2
Original paper jam inside of scanner
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• This troubleshooting may not be available depending on model or optional goods (see "Variety feature" on page 10).
4. Troubleshooting
98
Clearing original document jams
4. Troubleshooting
99
Clearing original document jams
3
Original paper jam in exit area of scanner
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
• This troubleshooting may not be available depending on model or optional goods (see "Front view" on page 20).
1
2
Remove any remaining pages from the document feeder.
Gently remove the jammed paper from the document feeder.
4. Troubleshooting
100
Clearing paper jams
To avoid tearing the paper, pull the jammed paper out slowly and gently.
4
In tray
Click this link to open an animation about clearing a jam.
Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
4. Troubleshooting
101
Clearing paper jams
4. Troubleshooting
102
Clearing paper jams
5
Inside the machine
Click this link to open an animation about clearing a jam.
• The fuser area is hot. Take care when removing paper from the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
4. Troubleshooting
103
Clearing paper jams
6
In exit area
Click this link to open an animation about clearing a jam.
• The fuser area is hot. Take care when removing paper from the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
4. Troubleshooting
104
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 107).
• You also can resolve the error with the guideline from the computer’s Samsung Printing Status window (see "Using Samsung Printer Status" on page 271).
• If the problem persists, call a service representative.
LED
Status
Off
Description
The machine is off-line.
Blinking
When the backlight blinks, the machine is receiving or printing data.
On
• The machine is on-line and can be used.
Green
• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message.
When the problem is cleared, the machine resumes.
Blinking
Status
• Small amount of toner is left in the cartridge. The estimated cartridge lifea of toner is close. Prepare a new
cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (see
"Redistributing toner" on page 79).b
Red
• A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to replace the toner
cartridge (see "Replacing the toner cartridge" on page 81).
• The cover is opened. Close the cover.
On
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display
messages" on page 107).
• A paper jam has occurred (see "Clearing paper jams" on page 101).
4. Troubleshooting
105
Understanding the status LED
LED
Status
Wirelessb
Power/Wakeup (
Eco
Scan tob
Blue
)
Description
Blinking
The machine is connecting to a wireless network.
On
The machine is connected to a wireless network (see "Wireless network setup" on page 159).
Off
The machine is disconnected from a wireless network.
On
The machine is in power save mode.
Off
The machine is in ready mode or machine’s power is off.
On
Eco mode is on.
Blue
The default setting of Eco mode is 2-up and toner save.
Green
Off
Eco mode is off.
On
Eco mode is on.
The default setting of Eco mode is 2-up and toner save.
Green
Off
Eco mode is off.
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19798. The number of pages
may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size. Some amount of toner may remain in the cartridge even when red LED is
on and the printer stops printing.
b. Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
4. Troubleshooting
106
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status
or errors. Refer to the tables below to understand the messages’ and their
meaning, and correct the problem, if necessary.
7
Paper Jam-related messages
Message
• This function is not supported for the devices which has a control panel
display. You can resolve the error with the guideline from the computer’s
Printing Status window (see "Using Samsung Printer Status" on page
271).
Document jam.
• If a message is not in the table, reboot the power and try the printing job
again. If the problem persists, call a service representative.
Jam or empty
• When you call for service, provide the service representative with the
contents of display message.
Remove jam
Door open&close
Meaning
Suggested solutions
The loaded original
document has jammed in
the document feeder.
Clear the jam (see "Clearing
original document jams" on
page 96).
• Paper has jammed in the
paper feed area.
• Clear the jam (see "In
tray" on page 101).
• There is no paper in tray.
• Load paper in tray (see
"Loading paper in the
tray" on page 40).
Clear the jam (see "Inside
the machine" on page 103).
• Some messages may not appear on the display depending on the
options or models.
• [error number] indicates the error number.
Paper Jam
• [tray type] indicates the tray number.
inside machine
Paper has jammed inside the
machine.
• [media type] indicates the media type.
• [media size] indicates the media size.
Paper Jam in [tray
type]
Paper has jammed in the
paper tray.
Clear the jam (see "Clearing
paper jams" on page 101).
• [color] indicates the color of toner.
Paper Jam
Paper has jammed in the exit
area.
Clear the jam (see "In exit
area" on page 104).
There is no paper in tray.
Load paper in tray (see
"Loading paper in the tray"
on page 40).
in exit area
Paper Empty in
[tray type]
4. Troubleshooting
107
Understanding display messages
8
Message
Toner-related messages
• Replace toner
Message
• Install Toner
• Install toner
cartridge
•
Not Compatible
[color] toner
•
Not Compatible
toner cartridge
Not original
[color] toner
• Prepare toner
• Prepare new
cartridge
Meaning
Suggested solutions
A toner cartridge is not
installed.
Install a toner cartridge.
The toner cartridge is not
suitable for your machine.
Install the corresponding
toner cartridge with
aSamsung-genuine
cartridge.
The toner cartridge is not a
Samsung-genuine toner
cartridge.
Install the corresponding
toner cartridge with a
Samsung-genuine
cartridge.
Small amount of toner is left
in the indicated cartridge.
The estimated cartridge life
of toner is close.
Prepare a new cartridge
for a replacement. You
may temporarily increase
the printing quality by
redistributing the toner
(see "Redistributing toner"
on page 79).
• Replace new
cartridge
Meaning
Suggested solutions
The indicated toner cartridge
has almost reached its
• You can choose Stop or
Continue as shown on
the control panel. If you
select Stop, the printer
stops printing and you
cannot print any more
without changing the
cartridge. If you select
Continue, the printer
keeps printing but the
printing quality cannot
be guaranteed.
Besides, it can cause
serious damage to your
machine.
estimated cartridge life. a
• Replace the toner
cartridge for the best
print quality when this
message appears.
Using a cartridge
beyond this stage can
result in printing
quality issues (see
"Replacing the toner
cartridge" on page 81).
The indicated toner cartridge
has reached its estimated
cartridge life.a The machine
might stop printing.
Replace the toner
cartridge (see "Replacing
the toner cartridge" on
page 81).
4. Troubleshooting
108
Understanding display messages
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates
the average capacity of print-outs and is designed pursuant to ISO/IEC 19798 (see "Available
supplies" on page 76). The number of pages may be affected by operating environment,
percentage of image area, printing interval, media, percentage of image area, and media size.
Some amount of toner may remain in the cartridge even when replace new cartridge appears
and the machine stops printing.
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as refilled or remanufactured. Samsung cannot guarantee a
non-genuine Samsung toner cartridge's quality. Service or repair required
as a result of using non-genuine Samsung toner cartridges will not be
covered under the machine warranty.
4. Troubleshooting
109
Understanding display messages
9
Message
Tray-related messages
• BOOTP problem:
Auto IP Run
Message
Jam or empty
Door open&close
Meaning
Suggested solutions
• Paper has jammed in the
paper feed area.
• Clear the jam (see "In
tray" on page 101).
• There is no paper in tray.
• Load paper in tray (see
"Loading paper in the
tray" on page 40).
10
Network-related messages
• BOOTP problem:
Reconfigure
DHCP
• DHCP problem:
Reconfigure
DHCP
802.1x
Network Problem:
IP Conflict
Wireless
Network Error
Meaning
Suggested solutions
The network IP address you
have set is being used by
someone else.
Check the IP address and
reset it if necessary (see
"Printing a network
configuration report" on
page 148).
Wireless module is not
installed.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Suggested solutions
There is a problem with the
network.
Change the Auto IP.
The IP address assignment is
failed. This happens, when
Auto IP for BOOTP/DHCP is
set in SyncThru™ Web
Service.
Change the IP address
assignment method to
DHCP/BOOTP or Static. If
you do not change this
option, the BOOTP/DHCP
server continually asks to
assign the IP Address.
Fail to authenticate.
Check the network
authentication protocol.
If the problem persists,
contact your network
administrator.
• DHCP problem:
Auto IP Run
Network Error
Message
Meaning
4. Troubleshooting
110
Understanding display messages
11
Message
Misc. messages
Meaning
Suggested solutions
The indicated toner
cartridge is installed
improperly, or the connector
is polluted.
Reinstall the Samsunggenuine toner cartridge
two or three times to
confirm it is seated
properly. Or clean the
connector. If the problem
persists, contact the
service representatives.
The machine unit cannot be
controlled.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Scanner Locked
The scanner is locked.
Reboot the power. If the
problem persists, please
call for service.
Install TR.
The transfer belt is not
installed.
Install a Samsunggenuine transfer belt.
The transfer belt of the
machine is not for your
machine.
Install the a Samsunggenuine part designed
for your machine.
The waste toner container is
not installed.
Install a Samsunggenuine waste toner
container.
Error [error number]
Install [color] toner
Message
Adjusting Color
Registration
Calibrating
image density…
Door Open
Close it
Scan Unit Open
or Exit JAM
Meaning
Suggested solutions
The machine is adjusting the
color registration.
Wait a few minutes.
The machine is calibrating
the image density.
Wait a few minutes.
The cover is not securely
latched.
Close the cover until it
locks into place.
Error [error number]
The scan unit is not securely • Clear the jam (see
"Clearing original
latched or paper has
document jams" on
jammed in the scanner area.
page 96).
• Close the cover until it
locks into place.
Door of scanner is
open.
The cover of scanner is not
securely latched.
Close the cover until it
locks into place.
Turn off then on
Error [error number]
Call for service
belt unit.
Not compatible
transfer belt
Not installed
Waste tank
4. Troubleshooting
111
Understanding display messages
Message
Check Fax Line
Not proper room
temp. Move set
Output bin Full
Remove paper
Prepare new
Transfer belt
Replace new
Transfer belt
Transfer Belt Error
Meaning
Suggested solutions
The fax line is not properly
connected to the LINE port.
Connect the fax line to
the LINE port not to the
EXT port (see "Rear view"
on page 22).
Prepare new
The machine is in a room
with improper room
temperature.
Move the machine to a
room with proper room
temperature.
Replace new
The output tray is full. Or the
sensor is not facing down.
Remove papers from the
output tray, the machine
resumes printing. Or
make sure the sensor is
facing down. If the
problem persists, call for
service.
The life of the transfer belt
will expired soon.
Replace the transfer belt
with a new one. Contact
the service
representatives.
The life of the transfer belt
has expired.
Replace the transfer belt
with a new one. Contact
the service
representatives.
The transfer belt cannot be
controlled.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Message
Transfer roller
Transfer roller
Replace
Fuser Soon
Replace new
Fuser unit
Replace/Install
Waste Toner Tank
Meaning
Suggested solutions
The life of the transfer belt
will expired soon.
Replace the transfer belt
with a new one. Contact
the service
representatives.
The life of the transfer belt
has expired.
Replace the transfer belt
with a new one. Contact
the service
representatives.
The life of the fuser unit will
be expired soon.
Replace the fuser unit
with a new one. Contact
the service
representatives.
The life of the fuser unit will
be expired.
The life span of the waste
toner container has expired
and the printer will stop
printing until a new waste
toner container is placed
into the printer.
Replace a waste toner
container with a
Samsung-genuine waste
toner container.
4. Troubleshooting
112
Understanding display messages
Message
Prepare new
Imaging unit
Replace with
new imaging unit
Install
imaging unit
Error [error number]
Door open/close
Meaning
The life of the imaging unit
will be expired soon.
The life of the imaging unit
will be expired.
Suggested solutions
Replace the imagingunit
with a new one. Contact
the service
representatives.
The imaging unit is not
installed
The imaging unit is installed
improperly, or the cover is
not securely latched.
Reinstall the imaging unit
to confirm it is seated
properly. Close the cover
until it locks into place.
4. Troubleshooting
113
5. Appendix
This chapter provides product specifications and information concerning applicable regulations.
• Specifications
115
• Regulatory information
124
• Copyright
137
Specifications
1
General specifications
The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information.
Items
Dimension
Weight
Noise Levelab
Width x Length x Height
Machine with consumables
C46xW
406 x 362 x 288.6 mm (16 x 14.3 x 11.4 inches)
C46xFW
406 x 362 x 333.5 mm (16 x 14.3 x 13.1 inches)
C46xW
12.80 Kg (28.22 lbs)
C46xFW
13.96 Kg (30.78 lbs)
Ready mode
background noise level
Print mode
Color printing
Less than 46 dB (A)
Black and white printing
Less than 48 dB (A)
Scanner glass
Less than 52 dB (A)
Document feeder
Less than 53 dB (A)
Scanner glass
Less than 51 dB (A)
Document feeder
Less than 51 dB (A)
Copy mode
Scan mode
Temperature
Description
Operation
10 to 30°C (50 to 86°F)
Storage (packed)
-20 to 40°C (-4 to 104°F)
5. Appendix
115
Specifications
Items
Humidity
Power ratingc
Power consumption d
Description
Operation
20 to 80% RH
Storage (packed)
10 to 90% RH
110 volt models
AC 110 - 127 V
220 volt models
AC 220 - 240 V
Average operating mode
Less than 290 W
Ready mode
Less than 60 W
Power save mode
• C46xW: Less than 1.7 W (Wi-Fi Direct on: Less than 2.5 W)
• C46xFW: Less than 2.1 W (Wi-Fi Direct on: Less than 2.9 W)
Wirelessf
a.
b.
c.
d.
e.
f.
Power off mode e
Less than 0.45 W
Network Standby Mode (All
Port Activation)
• C46xW: Less than 2.48 W
Module
SPW-B4319S
• C46xFW: Less than 2.55 W
Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
China only: If the equipment's noise is louder than 63 db (A), the equipment should be placed in region of relatively independent advice.
See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine.
The power consumption may be affected by the machine’s status, setting conditions, operating environment, and measuring equipment and method the country uses.
Power consumption can be completely avoided only when the power cable is not connected.
Wireless models only (see "Features by model" on page 7).
5. Appendix
116
Specifications
2
Print media specifications
Print media weight/Capacitya
Type
Size
Dimensions
Tray
Letter
216 x 279 mm (8.5 x 11 inches)
60 to 85 g/m2 (16 to 23 lbs bond)
Legal
216 x 356 mm (8.5 x 14 inches)
• 150 sheets of 75 g/m2 (20 lbs bond)
US Folio
216 x 330 mm (8.5 x 13 inches)
A4
210 x 297 mm (8.27 x 11.69 inches)
Oficio
216 x 343 mm (8.5 x 13.5 inches)
JIS B5
182 x 257 mm (7.17 x 10.12 inches)
ISO B5
176 x 250 mm (6.93 x 9.84 inches)
Executive
184 x 267 mm (7.25 x 10.5 inches)
A5
148 x 210 mm (5.83 x 8.27 inches)
A6
105 x 148 mm (4.13 x 5.83 inches)
Refer to the Plain
paper section
Refer to the Plain paper section
Refer to the Plain
paper section
Refer to the Plain paper section
Plain paper
Thick paper
Thin paper
86 to 120 g/m2 (23 to 32 lbs bond)
• 5 sheets
60 to 70 g/m2 (16 to 19 lbs bond)
• 150 sheets of 60 g/m2 (16 lbs bond)
5. Appendix
117
Specifications
Print media weight/Capacitya
Type
Size
Dimensions
Tray
Cotton
Refer to the Plain
paper section
Colored,
Pre-printed,
Refer to the Plain paper section
75 to 90 g/m2 (20 to 24 lbs bond)
• 150 sheets of 75 g/m2 (20 lbs bond)
Refer to the Plain paper section
Refer to the Plain
paper section
60 to 85 g/m2 (16 to 24 lbs bond)
• 150 sheets of 75 g/m2 (20 lbs bond)
Recycled
b
Labels
Card stock
Letter, Legal, Oficio,
Refer to the Plain paper section
US Folio, A4, JIS B5, ISO
B5, Executive, A5
Letter, Legal, Oficio,
Refer to the Plain paper section
US Folio, A4, JIS B5, ISO
B5, Executive, A5,
120 to 150 g/m2 (32 to 40 lbs bond)
• 5 sheets
121 to 163 g/m2 (32 to 43 lbs bond)
• 5 sheets
Postcard 4x6
Refer to the Plain
paper section
Refer to the Plain paper section
Refer to the Plain
paper section
Refer to the Plain paper section
Glossy Photo,
Letter, A4,
Refer to the Plain paper section
Matte Photo
Postcard 4x6
Bond paper
Archive
105 to 120 g/m2 (28 to 32 lbs bond)
• 10 sheets
70 to 90 g/m2 (18.6 to 24 lbs bond)
• 100 sheets
111 to 220 g/m2 (30 to 58 lbs bond)
• 1 sheets
5. Appendix
118
Specifications
Print media weight/Capacitya
Type
Size
Dimensions
Tray
Minimum size (custom)
76 x 152 mm (3 x 6 inches)
Maximum size (custom)
216 x 356 mm (8.5 x 14 inches)
60 to 120 g/m2 (16 to 32 lbs bond)
a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
b. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.
If media weight is over 120 g/m2 (32 lbs bond), load a paper into the tray one by one.
5. Appendix
119
Specifications
3
System requirements
Microsoft® Windows®
Requirement (recommended)
Operating system
CPU
RAM
free HDD space
Windows® XP
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (256 MB)
1.5 GB
Windows Server® 2003
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (512 MB)
1.25 GB to 2 GB
Windows Server® 2008
Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)
512 MB (2 GB)
10 GB
Windows Vista®
Intel® Pentium® IV 3 GHz
512 MB (1 GB)
15 GB
Windows® 7
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2008 R2
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
512 MB (2 GB)
10 GB
Windows® 8
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
5. Appendix
120
Specifications
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with your machine.
Mac
Requirements (Recommended)
Operating system
CPU
Mac OS X 10.5
• Intel® processors
RAM
Free HDD space
512 MB (1 GB)
1 GB
• 867 MHz or faster Power PC G4/G5
Mac OS X 10.6
• Intel® processors
1 GB (2 GB)
1 GB
Mac OS X 10.7 - 10.9
• Intel® processors
2 GB
4 GB
5. Appendix
121
Specifications
Linux
Items
Operating system
Requirements
Redhat® Enterprise Linux WS 4, 5, 6 (32/64 bit)
Fedora 5 ~ 15 (32/64 bit)
OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2, 11.3, 11.4 (32/64 bit)
Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04, 10.10, 11.04 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
Debian 4.0, 5.0, 6.0 (32/64 bit)
CPU
Pentium IV 2.4GHz (Intel Core™2)
RAM
512 MB (1 GB)
Free HDD space
1 GB (2 GB)
5. Appendix
122
Specifications
4
Network environment
Network and wireless models only (see "Features by model" on page 7).
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the
machine.
Items
Network interface
Specifications
• Ethernet 10/100 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN
Network operating system
• Windows® XP, Windows Server® 2003, Windows Vista®, Windows® 7, Windows Server® 2008 R2, Windows® 8
• Various Linux OS
• Mac OS X 10.5 -10.9
Network protocols
• TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP)
Wireless security
• Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)
• Encryption: WEP64, WEP128, TKIP, AES
5. Appendix
123
Regulatory information
This machine is designed for a normal work environment and certified with
several regulatory statements.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
5
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC 608251 : 2007.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above
a Class I level during normal operation, user maintenance or prescribed service
condition.
Warning
Never operate or service the printer with the protective cover removed from
laser/scanner assembly. The reflected beam, although invisible, can damage
your eyes.
6
Ozone safety
This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.
5. Appendix
124
Regulatory information
7
9
Mercury Safety
Contains Mercury, Dispose According to Local, State or Federal
Laws.(U.S.A. only)
Recycling
Recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
8
Power saver
This printer contains advanced energy conservation technology that
reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of
time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be on
your machine. Check if your machine is ENERGY STAR certified.
5. Appendix
125
Regulatory information
10
11
Correct disposal of this product (Waste electrical &
electronic equipment)
China only
(Applicable in countries with separate collection
systems)
Website: http://www.samsung.com/cn/support/location/
supportServiceLocation.do?page=SERVICE.LOCATION
襦 ᅜ 縑趀㞯 孮
賉ྕ
Xpress C460W
Xpress C460FW
蜷筨ᅜ竖㞯襔 GB 21521-2014
縑趀绌乏
1
2
術賉縑聱 ポkW·hマ
1.21
1.33
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these
items from other s of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
2000m
Dan hab yungh youq gij digih haijbaz 2000 m doxroengz haenx ancienz sawjyungh.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
5. Appendix
126
Regulatory information
(The United States of America only)
14
Radio frequency emissions
Dispose unwanted electronics through an approved recycler. To find the nearest
recycling location, go to our website: www.samsung.com/recyclingdirect Or
call, (877) 278 - 0799
12
State of California Proposition 65 Warning (US Only)
13
Taiwan only
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
5. Appendix
127
Regulatory information
•
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
15
United States of America
Consult the dealer or experienced radio TV technician for help.
Federal Communications Commission (FCC)
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and
Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme sur le
matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et
Sciences Canada.
Intentional emitter per FCC Part 15
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the
device and the body, for use of a wireless device near the body (this does not
include extremities). This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on. The power output of the wireless
device (or devices), which may be embedded in your printer, is well below the
RF exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
5. Appendix
128
Regulatory information
17
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it.
Contact manufacturer for service.
FCC Statement for Wireless LAN use:
Germany only
18
Turkey only
While installing and operating this transmitter and antenna combination
the radio frequency exposure limit of 1m W/cm2 may be exceeded at
distances close to the antenna installed. Therefore, the user must maintain
a minimum distance of 20cm from the antenna at all times. This device
cannot be colocated with another transmitter and transmitting antenna.
19
Thailand only
16
Russia / Kazakhstan / Belarus only
5. Appendix
129
Regulatory information
20
21
Canada only
This product meets the applicable Industry Canada technical specifications. / Le
present materiel est conforme aux specifications techniques applicables
d’Industrie Canada.
The Ringer Equivalence Number (REN) is an indication of the maximum number
of devices allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five. / L’indice
d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de
terminaux qui peuvent etre raccordes a une interface telephonique. La
terminaison d’une interface peut consister en une combinaison quelconque de
dispositifs, a la seule condition que la somme d’indices d’equivalence de la
sonnerie de tous les dispositifs n’excede pas cinq.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone facsimile machine unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the first page of the
transmission the following information:
1 the date and time of transmission
2 identification of either business, business entity or individual sending the
message; and
3 telephone number of either the sending machine, business, business entity
or individual.
The Telephone Company may make changes in its communications facilities,
equipment operations or procedures where such action is reasonably required
in the operation of its business and is not inconsistent with the rules and
regulations in FCC Part 68. If such changes can be reasonably expected to render
any customer terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such terminal
equipment, or otherwise materially affect its use or performance, the customer
shall be given adequate notice in writing, to allow the customer an opportunity
to maintain uninterrupted service
5. Appendix
130
Regulatory information
22
FCC Regulations state that changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to
operate this equipment. In the event that terminal equipment causes harm
to the telephone network, the telephone company should notify the
customer that service may be stopped. However, where prior notice is
impractical, the company may temporarily cease service, providing that
they:
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this machine
may be found on the label located on the bottom or rear of the machine. In some
instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed
on the telephone line, and is useful for determining whether you have
“overloaded” the line. Installing several s of equipment on the same telephone
line may result in problems making and receiving telephone calls, especially
ringing when your line is called. The sum of all Ringer Equivalence Numbers of
the equipment on your telephone line should be less than five in order to assure
proper service from the telephone company. In some cases, a sum of five may
not be usable on your line. If any of your telephone equipment is not operating
properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.
The equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear of this equipment is a label that contains,
among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
a promptly notify the customer.
b give the customer an opportunity to correct the equipment problem.
c inform the customer of the right to bring a complaint to the Federal
Communication Commission pursuant to procedures set out in FCC
Rules and Regulations Subpart E of Part 68.
You should also know that:
•
Your machine is not designed to be connected to a digital PBX system.
•
If you intend to use a computer modem or fax modem on the same phone
line as your machine, you may experience transmission and reception
problems with all the equipment. It is recommended that no other
equipment, except for a regular telephone, share the line with your
machine.
•
If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for both the power and the
telephone lines. Surge protectors can be purchased from your dealer or
telephone and electronic specialty stores.
5. Appendix
131
Regulatory information
•
When programming emergency numbers and/or making test calls to
emergency numbers, use a non-emergency number to advise the
emergency service dispatcher of your intentions. The dispatcher will give
you further instructions on how to actually test the emergency number.
•
This machine may not be used on coin service or party lines.
•
This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of
a standard modular jack, USOC RJ-11C.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.
Important warning:
You must earth this machine.
23
Replacing the Fitted Plug (for UK Only)
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug
and has a 13 amp fuse. When you change or examine the fuse, you must re-fit
the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost
the fuse cover, do not use the plug until you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug
sockets. You need to buy a suitable plug adaptor. Do not remove the moulded
plug.
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter “E”
or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
5. Appendix
132
Regulatory information
EC Certification
24
Declaration of conformity (European countries)
Approvals and Certifications
Hereby, Samsung Electronics, declares that this [ProXpress
M332xND, ProXpress M382xD, ProXpress M382xND, ProXpress
M402xND] is in compliance with the essential requirements and
other relevant provisions of Low Voltage Directive (2006/95/EC),
EMC Directive (2004/108/EC).
Hereby, Samsung Electronics, declares that this [ProXpress
M382xDW] is in compliance with the essential requirements and
other relevant provisions of R&TTE Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.samsung.com, go to Support > Download center and enter
your printer (MFP) name to browse the EuDoC.
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
the member states related to low voltage equipment.
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal
Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European
single terminal connection to the analogue public switched telephone network
(PSTN) in accordance with Directive 1999/5/EC. The product has been designed
to work with the national PSTNs and compatible PBXs of the European
countries:
In the event of problems, you should contact the Euro QA Lab of Samsung
Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application
of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document
(EG 201 121) which contains notes and additional requirements to ensure
network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained
in this document.
January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of
the Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity. A full declaration, defining the relevant Directives and referenced
standards can be obtained from your Samsung Electronics Co., Ltd.
representative.
5. Appendix
133
Regulatory information
European radio approval information (for products
fitted with EU-approved radio devices)
25
Israel only
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz band, may be present
(embedded) in your printer system which is intended for home or office use. This
section is only applicable if these devices are present. Refer to the system label
to verify the presence of wireless devices.
26
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark is on the
system label.
The power output of the wireless device or devices that may be embedded in
you printer is well below the RF exposure limits as set by the European
Commission through the R&TTE directive.
European states qualified under wireless approvals:
EU countries
European states with restrictions on use:
EU
EEA/EFTA countries
Regulatory compliance statements
Wireless guidance
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in
the specific country sections (or country group sections). The wireless devices in
your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the
wireless device in, is not listed, contact your local Radio Approval agency for
requirements. Wireless devices are closely regulated and use may not be
allowed.
No limitations at this time
5. Appendix
134
Regulatory information
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as known at this time. Because
the wireless devices (which may be embedded into your printer) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe for use.
Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm (8
inches) from the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed below:
Radio frequency wireless communication can interfere with
equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
IEEE 802.11 (also known as wireless Ethernet) and Bluetooth
communication devices are examples of devices that provide wireless
communication.
In environments where the risk of interference to other devices or
services is harmful or perceived as harmful, the option to use a wireless
device may be restricted or eliminated. Airports, Hospitals, and
Oxygen or flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or eliminated. When in
environments where you are uncertain of the sanction to use wireless
devices, ask the applicable authority for authorization prior to use or
turning on the wireless device.
Every country has different restrictions on the use of wireless devices.
Since your system is equipped with a wireless device, when traveling
between countries with your system, check with the local Radio
Approval authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
If your system came equipped with an internal embedded wireless
device, do not operate the wireless device unless all covers and shields
are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any
way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be
used. See the manufacturer System Restoration Kit, or contact
manufacturer Technical Support for additional information.
5. Appendix
135
Regulatory information
27
China only
᳝ᆇ⠽䋼
5. Appendix
136
Copyright
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•
Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•
Microsoft, Windows, Windows Vista, Windows 7, Windows 8 and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft
Corporation.
•
Google, Picasa, Google Docs, Android and Gmail are either registered trademarks or trademarks of Google Inc.
•
Google Cloud Print is a trademark of Google Inc.
•
iPad, iPhone, iPod touch, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries. AirPrint and the AirPrint logo are trademarks
of Apple Inc.
•
All other brand or product names are trademarks of their respective companies or organizations.
Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.
REV. 9.01
5. Appendix
137
User’s Guide
C46x series
ADVANCED
ADVANCED
This guide provides information about installation, advanced configuration,
operation and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
This guide provides information concerning installation, basic operation and troubleshooting
on windows.
ADVANCED
1. Software Installation
3. Useful Setting Menus
Installation for Mac
142
Before you begin reading a chapter
204
Reinstallation for Mac
143
Print
205
Installation for Linux
144
Copy
206
Reinstallation for Linux
145
Fax
209
Scan
213
System setup
215
Network setup
221
2. Using a Network-Connected
Machine
Useful network programs
147
Wired network setup
148
Installing driver over the network
151
Altitude adjustment
224
IPv6 configuration
156
Entering various characters
225
Wireless network setup
159
Setting up the fax address book
226
Samsung Mobile Print
192
Printing features
229
Using the NFC feature
193
Scan features
241
AirPrint
198
Fax features
250
Google Cloud Print
200
4. Special Features
139
ADVANCED
5. Useful Management Tools
Easy Capture Manager
260
Samsung Easy Color Manager
261
Samsung AnyWeb Print
262
Easy Eco Driver
263
Using SyncThru™ Web Service
264
Using Samsung Easy Printer Manager
267
Using Samsung Easy Document Creator
270
Using Samsung Printer Status
271
Using the Linux Unified Driver Configurator 273
6. Troubleshooting
Paper feeding problems
277
Power and cable connecting problems
278
Printing problems
279
Printing quality problems
283
Copying problems
291
Scanning problems
292
Faxing problems
293
Operating system problems
295
140
1. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using
the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network
connected machine’s driver (see "Installing driver over the network" on page 151).
• Installation for Mac
142
• Reinstallation for Mac
143
• Installation for Linux
144
• Reinstallation for Linux
145
• If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see
"Installing the driver locally" on page 28).
• Only use a USB cable no longer then 3 meter (118 inches).
Installation for Mac
1
Make sure that the machine is connected to your computer and
powered on.
10
Select USB Connected Printer on the Printer Connection Type and
click Continue.
2
Insert the supplied software CD into your CD-ROM drive.
11
Click Add Printer button to select your printer and add it to your printer
list.
If your machine supports fax, click Add Fax button to select your fax and
add it to your fax list
12
3
Double-click the CD-ROM icon that appears on your Mac desktop.
•
4
5
6
7
8
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
After the installation is finished, click Close.
To install the fax driver:
a Open the Applications folder > Samsung > Fax Queue Creator.
b Your machine appears on the Printer List
c Select machine to use and click Create button
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9
Enter the password and click OK.
1. Software Installation
142
Reinstallation for Mac
If the printer driver does not work properly, uninstall the driver and reinstall it.
1
Open the Applications folder > Samsung > Printer Software
Uninstaller.
2
3
4
5
To uninstall printer software, click Continue.
Check the program you want to delete and click Uninstall.
Enter the password and click OK.
After the uninstallation is finished, click Close.
If a machine has already been added, delete it from the Print Setup Utility
or Print & Fax.
1. Software Installation
143
Installation for Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
1
The installation program added the Unified Driver Configurator desktop icon
and the Unified Driver group to the system menu for your convenience. If you
have any difficulties, consult the on-screen help that is available through your
system menu or from the driver package Windows applications, such as Unified
Driver Configurator or Image Manager.
Installing the Unified Linux Driver
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type “root” in the
Login field and enter the system password.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
3
From the Samsung website, download the Unified Linux Driver package
to your computer.
4
5
6
7
Right-click the Unified Linux Driver package and extract the package.
Double click cdroot > autorun.
When the welcome screen appears, click Next.
When the installation is complete, click Finish.
1. Software Installation
144
Reinstallation for Linux
If the printer driver does not work properly, uninstall the driver and reinstall it.
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type “root” in the
Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer driver. If you
are not a super user, ask your system administrator.
3
Open the Terminal program. When the Terminal screen appears, type in
the following.
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninstall]#./uninstall.sh
4
5
Click Next.
Click Finish.
1. Software Installation
145
2. Using a NetworkConnected Machine
This chapter gives you step-by-step instructions for setting up a network connected machine and software.
• Useful network programs
147
• Wired network setup
148
• Installing driver over the network
151
• IPv6 configuration
156
• Wireless network setup
159
• Samsung Mobile Print
192
• Using the NFC feature
193
• AirPrint
198
• Google Cloud Print
200
Supported optional devices and features may differ according to your model (see "Features by
model" on page 7).
Useful network programs
There are several programs available to setup the network settings easily in a
network environment. For the network administrator especially, managing
several machines on the network is possible.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
2
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate internet access.
•
Download this program from http://solution.samsungprinter.com.
1
3
SyncThru™ Web Service
The web server embedded on your network machine allows you to do the
following tasks (see "Using SyncThru™ Web Service" on page 264).
•
Check the supplies information and status.
•
Customize machine settings.
•
Set the email notification option. When you set this option, the machine
status (toner cartridge shortage or machine error) will be sent to a certain
person's email automatically.
•
Configure the network parameters necessary for the machine to connect to
various network environments.
SetIP wired network setup
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
•
See "IPv4 configuration using SetIP (Windows)" on page 148.
•
See "IPv4 configuration using SetIP (Mac)" on page 149.
•
See "IPv4 configuration using SetIP (Linux)" on page 150.
• The machine that does not support the network port, it will not be able
to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
2. Using a Network-Connected Machine
147
Wired network setup
4
5
Printing a network configuration report
Setting IP address
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
Press the
(Menu) button on the control panel and select Network >
Network Conf. (Network Configuration).
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
For example:
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 169.254.192.192
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
1
Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
2
Follow the instructions in the installation window.
2. Using a Network-Connected Machine
148
Wired network setup
3
4
5
Connect your machine to the network with a network cable.
IPv4 configuration using SetIP (Mac)
Turn on the machine.
Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
6
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
7
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
The following instructions may vary from your model.
1
2
Connect your machine to the network with a network cable.
3
Double-click the CD-ROM icon that appears on your Mac desktop.
Insert the supplied software CD into your CD-ROM drive.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 148) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
•
4
5
6
7
For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
2. Using a Network-Connected Machine
149
Wired network setup
8
Click Install. All components necessary for machine operations will be
installed.
IPv4 configuration using SetIP (Linux)
If you click Customize, you can choose individual components to install.
Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
9
10
Enter the password and click OK.
11
Select Network Connected Printer(Wired or Wireless) on the Printer
Connection Type and click Set IP Address button.
The following instructions may vary from your model or operating systems.
When the message that warns that all applications will close on your
computer appears, click Continue.
12
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
13
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
1
2
3
4
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
Double-click the SetIPApplet.html file.
Click to open the TCP/IP configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 148) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 148) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
14
Open /opt/Samsung/mfp/share/utils/.
5
The machine will automatically print the Network Configuration
Report.
2. Using a Network-Connected Machine
150
Installing driver over the network
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
• You can install the printer driver and software when you insert the
software CD into your CD-ROM drive.
For windows, select the printer driver and software in the Select
Software to Install window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
6
Windows
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
The firewall software might be blocking network communication. Before
connecting the device to the network, disable the computer’s firewall.
Command- line
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 148).
2
3
Insert the supplied software CD into your CD-ROM drive.
4
5
Select Network Connection on the Printer Connection Type screen.
/s or
/S
Definition
Starts silent installation.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Review and accept the installation agreements in the installation
window. Then, click Next.
Follow the instructions in the installation window.
2. Using a Network-Connected Machine
151
Installing driver over the network
Command- line
/p”<port name>” or
Definition
Specifies printer port.
/P”<port name>”
Network Port will be
created by use of
Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port
name.
Command- line
/nd or
/ND
/A”<dest_path>”
Specifies destination path
for installation.
The destination
path should be a
fully qualified path.
/n”<Printer name>”
or
/N”<Printer name>”
Specifies printer name.
Printer instance shall be
created as specified printer
name.
Description
Commands not to set the
installed driver as a default
machine driver.
It indicates installed
machine driver will not be
the default machine driver
on your system if there are
one or more printer drivers
installed. If there is no
installed machine driver on
your system, then this
option won’t be applied
because Windows OS will
set installed printer driver as
a default machine driver.
Uses existing machine
driver files to create printer
instance if it is already
installed.
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
Removes only specified
printer instance and not the
driver files.
This command provides a
way to remove only
specified printer instance
from your system without
effecting other printer
drivers. It will not remove
printer driver files from your
system.
For example:
•
/p”xxx.xxx.xxx.xxx” in
where, “xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”
/x or
/a”<dest_path>” or
Definition
Since machine drivers
should be installed on the
OS specific location, this
command applies to only
application software.
/X
/up”<printer
name>” or
With this parameter, you
can add printer instances as
you wish.
/UP”<printer
name>”
2. Using a Network-Connected Machine
152
Installing driver over the network
7
Command- line
Definition
Description
Uninstalls all device drivers
and applications from your
system.
This command will remove
all installed device drivers
and application software
from your system.
/v”<share name>” or Shares installed machine
and add other available
/V”<share name>”
platform drivers for Point &
Print.
It will install all supported
Windows OS platform’s
machine drivers to system
and share it with specified
<share name> for point and
print.
/o or
This command will open
Printers and Faxes folder
after the silent installation.
/d or
/D
/O
Opens Printers and Faxes
folder after installation.
/h, /H or /?
Shows Command-line Usage.
Mac
1
Make sure that the machine is connected to your network and powered
on.
2
Insert the supplied software CD into your CD-ROM drive.
3
Double-click the CD-ROM icon that appears on your Mac desktop.
•
4
5
6
7
8
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
2. Using a Network-Connected Machine
153
Installing driver over the network
9
10
Enter the password and click OK.
Select Network Connected Printer(Wired or Wireless) on the Printer
Connection Type and click Continue.
11
Click Add Printer button to select your printer and add it to your printer
list.
12
13
14
Click IP and select HP Jetdirect - Socket in Protocol.
8
Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Install the Linux driver and add network printer
Enter the machine’s IP address in the Address input field.
Enter the queue name in the Queue input field. If you cannot determine
the queue name for your machine server, try using the default queue
first.
15
If Auto Select does not work properly, choose Select Printer Software
and your machine name in Print Using.
16
17
Click Add.
After the installation is finished, click Close.
To install the fax driver:
a Open the Applications folder > Samsung > Fax Queue Creator.
b Your machine appears on the Printer List.
c Select machine to use and Click Create button.
1
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2
3
4
5
6
7
8
9
Download the Unified Linux Driver package from the Samsung website.
Extract the UnifiedLinuxDriver.tar.gz file and open the new directory.
Double-click the cdroot > autorun
The Samsung installer window opens. Click Next.
The add printer wizard window opens. Click Next.
Select network printer and click Search button.
The machine’s IP address and model name appears on list field.
Select your machine and click Next.
2. Using a Network-Connected Machine
154
Installing driver over the network
10
11
12
Input the printer description and Next.
After the machine is added, click Finish.
When installation is done, click Finish.
Add a network printer
1
2
3
4
5
6
7
8
Double-click the Unified Driver Configurator.
Click Add Printer.
The Add printer wizard window opens. Click Next.
Select Network printer and click the Search button.
The printer’s IP address and model name appears on list field.
Select your machine and click Next.
Enter the printer description and click Next.
After the machine is added, click Finish.
2. Using a Network-Connected Machine
155
IPv6 configuration
9
IPv6 is supported properly only in Windows Vista or higher.
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7 or "Menu
overview" on page 31).
• If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using Clear Setting.
The machine supports the following IPv6 addresses for network printing and
managements.
•
From the control panel
Activating IPv6
1
2
3
4
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
Press the
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > IPv6 Activate.
Select On and press OK.
Turn the machine off and turn it on again.
When you install the printer driver, do not configure both IPv4 and
IPv6. We recommend to configure either IPv4 or IPv6 (see "Installing
driver over the network" on page 151).
DHCPv6 address configuration
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
1
2
Press the
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > DHCPv6 Config.
2. Using a Network-Connected Machine
156
IPv6 configuration
3
Press OK to select the required value you want.
•
DHCPv6 Addr.: Always use DHCPv6 regardless of router request.
•
DHCPv6 Off: Never use DHCPv6 regardless of router request.
•
Router: Use DHCPv6 only when requested by a router.
5
6
7
Check the IPv6 Protocol check box to activate IPv6.
Click the Apply button.
Turn the machine off and turn it on again.
• You can also set the DHCPv6.
10
• To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A
through F).
From the SyncThru™ Web Service
Activating IPv6
1
2
3
4
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
•
ID: admin
•
Password: sec00000
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
IPv6 address configuration
1
Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
2
Select one of the IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Network
Configuration Report (see "Printing a network configuration report" on
page 148).
•
Link-local Address: Self-configured local IPv6 address (Address
starts with FE80).
•
Stateless Address: Automatically configured IPv6 address by a
network router.
Click TCP/IPv6 on the left pane of the website.
2. Using a Network-Connected Machine
157
IPv6 configuration
3
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
2. Using a Network-Connected Machine
158
Wireless network setup
• Make sure your machine supports wireless networking. Wireless
networking may not be available depending on the model (see "Features
by model" on page 7).
• If the IPv6 network seems to not be working, set all the network settings
to the factory defaults and try again using Clear Setting.
Wireless network name and network password
Wireless networks require higher security, so when an access point is first set up,
a network name (SSID), the type of security used, and a Network Password are
created for the network. Ask your network administrator about this information
before proceeding with the machine installation.
11
Getting started
Understanding your network type
Typically, you can only have one connection between your computer and the
machine at a time.
Infrastructure mode
This is an environment generally used for homes and SOHOs
(Small Office/ Home Office). This mode uses an access point to
communicate with the wireless machine.
Ad hoc mode
This mode does not use an access point. The wireless
computer and wireless machine communicate directly.
2. Using a Network-Connected Machine
159
Wireless network setup
12
Introducing wireless set up methods
You can set wireless settings either from the machine or the computer. Choose the setting method from the below table.
Some wireless network installation types may not be available depending on the model or country.
Set up method
Connecting method
From the computer
Description & Reference
Windows user, see "Access point via USB cable" on page 166.
Windows user, see "Access point without a USB cable (recommended)" on page 170.
• Mac user, see "Access point via USB cable" on page 175.
• Mac user, see "Access point without a USB cable (recommended)" on page 178
With Access Point
See "Using a network cable" on page 183.
From the machine’s control
panel
• See "Machines with a display screen" on page 163.
• See "Machines without a display screen" on page 164.
See "Using the menu button" on page 166.
2. Using a Network-Connected Machine
160
Wireless network setup
Set up method
Without Access Point
Connecting method
From the computer
Description & Reference
Windows user, see "Ad hoc via USB cable" on page 172.
Mac user, see "Ad hoc via USB cable" on page 172.
Wi-Fi Direct setup
See "Setting up Wi-Fi Direct" on page 186.
• If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting" on page 188).
• It is strongly recommended that you set the password on Access Points. If you do not set the password on Access Points, they might be exposed to illegal access
from unknown machines including PCs, smart phones and printers. Refer to the Access Point user’s guide for password settings.
2. Using a Network-Connected Machine
161
Wireless network setup
Choosing your type
13
Using the WPS button
There are two methods available to connect your machine to a wireless network
If your machine and an access point (or wireless router) support Wi-Fi Protected
Setup™ (WPS), you can easily configure the wireless network settings by
pressing the
(WPS) button on the control panel without a computer.
• If you want to use the wireless network using the infrastructure mode,
make sure that the network cable is disconnected from the machine.
Using the WPS (PBC) button or entering the PIN from the computer to
connect to the access point (or wireless router) varies depending on the
access point (or wireless router) you are using. Refer to the user's guide
of the access point (or wireless router) you are using.
• When using the WPS button to set the wireless network, security settings
may change. To prevent this, lock the WPS option for the current wireless
security settings. The option name may differ depending on the access
point (or wireless router) you are using.
using the
(WPS) button on the control panel.
The Push Button Configuration (PBC) method allows you to connect your
machine to a wireless network by pressing both the
(WPS) button on the
control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected
Setup™ WPS-enabled access point (or wireless router) respectively.
The Personal Identification Number (PIN) method helps you connect your
machine to a wireless network by entering the supplied PIN information on a WiFi Protected Setup™ WPS-enabled access point (or wireless router).
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
If your machine does not have a display screen, you can enable or disable
the Wi-Fi Direct feature with the WPS button.
Items to prepare
• Press and hold the
(WPS) button on the control panel for about 1015 seconds. Wi-Fi Direct feature turns on.
•
Check if the access point (or wireless router) supports Wi-Fi Protected
Setup™ (WPS).
• Press and hold the
(WPS) button on the control panel for more than
15 seconds. Wi-Fi Direct feature turns off.
•
Check if your machine supports Wi-Fi Protected Setup™ (WPS).
• To get more information about the Wi-Fi Direct feature, read the "Setting
the Wi-Fi Direct for mobile printing" on page 186.
•
Networked computer (PIN mode only)
2. Using a Network-Connected Machine
162
Wireless network setup
Connecting in PIN mode
You can change the WPS mode in control panel (
(Menu) > Network >
Wireless > OK > WPS Setting).
Machines with a display screen
1
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
2
The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The messages are displayed on the display screen in the order below:
Connecting in PBC mode
a Connecting: The machine is connecting to the wireless network.
1
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
The machine starts waiting for up to two minutes until you press the WPS
(PBC) button on the access point (or wireless router).
2
Press the WPS (PBC) button on the access point (or wireless router).
The messages are displayed on the display screen in the order below:
c SSID Type: After completing the wireless network connection
process, the AP’s SSID information is displayed on the LCD display.
3
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
a Connecting: The machine is connecting to the access point (or
wireless router).
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c AP SSID: After completing the wireless network connection process,
the AP’s SSID information appears on the display.
3
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
2. Using a Network-Connected Machine
163
Wireless network setup
Machines without a display screen
Connecting in PBC mode
1
Connecting in PIN mode
1
In ready mode, Press the (Cancel or Stop/Clear) button for more than
five seconds on the control panel.
Press and hold the
(WPS) button on the control panel for about 2 - 4
seconds until the status LED blinks quickly.
The machine without the
The machine starts connecting to the wireless network. The LED blinks
slowly for up to two minutes until you press the PBC button on the
access point (or wireless router).
2
Press the WPS (PBC) button on the access point (or wireless router).
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
3
The network configuration report, including PIN, must be printed (see
"Printing a network configuration report" on page 148).
(WPS)
(Cancel or Stop/Clear) button: Press the
button for more than ten seconds on the control panel.
You can find your machine’s PIN.
2
Press and hold the
(WPS) button on the control panel for more than
4 seconds until the status LED stays on.
The machine starts connecting to the access point (or wireless router).
3
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The LED blinks slowly for up to two minutes until you enter the eightdigit PIN.
The WPS LED blinks in the order below:
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
4
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
2. Using a Network-Connected Machine
164
Wireless network setup
Re-connecting to a network
Disconnecting from a network
When the wireless function is off, the machine automatically tries to re-connect
to the access point (or wireless router) with the previously used wireless
connection settings and address.
To disconnect the wireless network connection, press the
the control panel for more than two seconds.
(WPS) button on
•
When the Wi-Fi network is in idle mode: The machine is immediately
disconnected from the wireless network and the WPS LED turns off.
•
• The machine is turned off and on again.
When the Wi-Fi network is being used: While the machine waits until the
current job is finished, the light blinks fast on the WPS LED. Then, the
wireless network connection is automatically disconnected and the WPS
• The access point (or wireless router) is turned off and on again.
LED turns off.
In the following cases, the machine automatically re-connects to the
wireless network:
Canceling the connection process
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release the
(Cancel or Stop/Clear) or
(Power/Wakeup) button on the control panel. You need to wait 2 minutes to
re-connect to the wireless network.
2. Using a Network-Connected Machine
165
Wireless network setup
14
15
Using the menu button
Setup using Windows
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine
Before starting, you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over the
network" on page 151).
1
2
3
Press the
(Menu) button on the control panel.
Press Network > Wireless > WLAN Settings.
Shortcut to the Samsung Easy Wireless Setup program without the CD: If
you have installed the printer driver once, you can access the Samsung
Easy Wireless Setup program without the CD (see "Accessing
management tools" on page 317).
Access point via USB cable
Items to prepare
•
Access point
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
Press the OK to select the setup method you want.
•
•
Wizard (recommended): In this mode, the setup is automatic. The
machine will display a list of available networks from which to
choose. After a network is chosen then printer will prompt for the
corresponding security key.
Custom: In this mode, users can give or edit manually their own
SSID, or choose the security option in detail.
Creating the infrastructure network
1
2
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
2. Using a Network-Connected Machine
166
Wireless network setup
3
Insert the supplied software CD into your CD-ROM drive.
5
Select Wireless network connection on the Printer Connection Type
screen. Then, click Next.
6
On the Are you setting up your printer for the first time? screen, select
Yes, I will set up my printer's wireless network. Then, click Next.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
4
Review and accept the installation agreements in the installation
window. Then, click Next.
If your printer is already connected on the network, select No, my
printer is already connected to my network.
2. Using a Network-Connected Machine
167
Wireless network setup
7
Select Using a USB cable on the Select the Wireless Setup Method
screen. Then, click Next.
8
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click Next.
If you cannot find the network name you want to choose, or if you want to
set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on a WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre Shared Key pass phrase), which is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,
TKIP AES).
• Network Password: Enter the encryption network password value.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
2. Using a Network-Connected Machine
168
Wireless network setup
The wireless network security window appears when the access point has
security settings.
Enter the Network Password of the access point (or router).
9
10
When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click Next.
11
Follow the instructions in the installation window.
If your printer supports Wi-Fi Direct, the following screen will appear.
Click Next.
• Wi-Fi Direct option appears on the screen only if your printer supports
this feature.
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 186).
• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
2. Using a Network-Connected Machine
169
Wireless network setup
Access point without a USB cable (recommended)
If the installation window does not appear, click Start > All programs >
Accessories > Run.
Items to prepare
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
•
WiFi-enabled PC running Windows 7 or higher and an access point (router)
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
3
Review and accept the installation agreements in the installation
window. Then, click Next.
4
Select Wireless network connection on the Printer Connection Type
screen. Then, click Next.
5
On the Are you setting up your printer for the first time? screen, select
Yes, I will set up my printer's wireless network. Then, click Next.
While setting the wireless network, the machine uses PC's wireless LAN. You
might not be able to connect to the Internet.
Creating the infrastructure network
1
2
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD-ROM drive.
If your printer is already connected on the network, select No, my
printer is already connected to my network.
2. Using a Network-Connected Machine
170
Wireless network setup
6
Select Using a direct wireless connection on the Select the Wireless
Setup Method screen. Then, click Next.
Even if your computer is running Windows 7 or higher, you cannot use this
feature if your PC does not support wireless network. Set the wireless
network using a USB cable (see "Access point via USB cable" on page 166).
If below screen appears, press the
panel within 2 minutes.
7
8
(WPS) button from the control
When the wireless network set up is completed, click Next.
Follow the instructions in the installation window.
2. Using a Network-Connected Machine
171
Wireless network setup
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
Creating the ad hoc network in Windows
1
2
Turn on your computer and the wireless network machine.
Insert the supplied software CD into your CD-ROM drive.
Items to prepare
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
3
Review and accept the installation agreements in the installation
window. Then, click Next.
2. Using a Network-Connected Machine
172
Wireless network setup
4
Select Wireless network connection on the Printer Connection Type
screen. Then, click Next.
7
After searching the wireless networks, a list of wireless networks your
machine has searched appears. Click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
• Operation Mode: Select ad hoc.
• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Password: Enter the encryption network password value.
5
On the Are you setting up your printer for the first time? screen, select
Yes, I will set up my printer's wireless network. Then, click Next.
If your printer is already connected on the network, select No, my
printer is already connected to my network.
6
Select Using a USB cable on the Select the Wireless Setup Method
screen. Then, click Next.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the ad hoc network
has security enabled.
Select Open System or Shared Key for the authentication and click Next.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
2. Using a Network-Connected Machine
173
Wireless network setup
8
The window showing the wireless network setting appears. Check the
settings and click Next.
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
9
10
The Wireless Network Setting Complete window appears. Click Next.
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
11
Follow the instructions in the installation window.
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer’s network information is as shown follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as below:
- IP address: 169.254.133.43
2. Using a Network-Connected Machine
174
Wireless network setup
16
Setup using Mac
Access point via USB cable
Items to prepare
•
Access point
•
Network-connected printer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
1
Make sure that the machine is connected to your computer and
3
Double-click the CD-ROM icon that appears on your Mac desktop.
•
4
5
6
7
8
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9
Enter the password and click OK.
powered on.
2
Insert the supplied software CD into your CD-ROM drive.
2. Using a Network-Connected Machine
175
Wireless network setup
10
Select Configuration of Wireless network on the Printer Connection
Type and click Continue.
11
If Wireless Settings screen appears, select Using a USB cable and click
Next.
If the screen does not appear, go to step 15.
2. Using a Network-Connected Machine
176
Wireless network setup
12
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click Next.
13
• Wi-Fi Direct option appears on the screen only if your printer supports
this feature.
When you set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 186).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
The window showing the wireless network setting appears. Check the
settings and click Next.
• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
14
15
The Wireless Network Setting Complete window appears. Click Next.
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
• Network Password: Enter the encryption network password value.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
Enter the Network Password of the access point (or router).
2. Using a Network-Connected Machine
177
Wireless network setup
Access point without a USB cable (recommended)
Items to prepare
•
7
8
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
1
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
WiFi-enabled Mac running Mac OS 10.7 or higher and an access point
(router)
•
Click Agree to agree to the license agreement.
9
10
Enter the password and click OK.
Select Configuration of Wireless network on the Printer Connection
Type and click Continue.
Make sure that the machine is connected to your computer and
powered on.
2
Insert the supplied software CD into your CD-ROM drive.
3
Double-click the CD-ROM icon that appears on your Mac desktop.
•
4
5
6
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
2. Using a Network-Connected Machine
178
Wireless network setup
11
If Wireless Settings screen appears, select Using a direct wireless
connection and click Next.
If below screen appears, press the
within 2 minutes.
If the screen does not appear, go to step 13.
12
13
(WPS) button from the control panel
When the wireless network set up is completed, click Next.
After the installation is finished, click Close.
2. Using a Network-Connected Machine
179
Wireless network setup
Ad hoc via USB cable
3
Double-click the CD-ROM icon that appears on your Mac desktop.
•
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
Creating the ad hoc network in Mac
1
4
5
6
7
8
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9
Enter the password and click OK.
Make sure that the machine is connected to your computer and
powered on.
2
Insert the supplied software CD into your CD-ROM drive.
2. Using a Network-Connected Machine
180
Wireless network setup
10
Select Configuration of Wireless network on the Printer Connection
Type and click Continue.
11
After searching the wireless networks, a list of wireless networks your
machine has searched appears. Click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID name (SSID is casesensitive).
• Operation Mode: Select ad hoc.
• Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Password: Enter the encryption network password value.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the ad hoc network
has security setting.
Select Open System or Shared Key for the authentication and click Next.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
2. Using a Network-Connected Machine
181
Wireless network setup
12
The window showing the wireless network settings appears. Check the
settings and click Next.
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
13
If your computer is set to DHCP and you want to use Static wireless network
setting, you must contact the network administrator to get the static IP
address.
14
15
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer’s network information is shown as follows:
When the window that tells you that the network cable connection is
confirmed appears, disconnect the network cable and click Next.
If the network cable is connected, it may have trouble finding the
machine when configuring the wireless network.
The wireless network connects according to the network configuration.
Wireless network set up is completed. After installation is finished, click
Quit.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Mac" on
page 142).
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as shown below:
- IP address: 169.254.133.43
2. Using a Network-Connected Machine
182
Wireless network setup
Printing a network configuration report
17
Using a network cable
You can identify the network settings of your machine by printing a network
configuration report.
Machines that do not support the network interface will not be able to use
this feature (see "Rear view" on page 22).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 151).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
See "Printing a network configuration report" on page 148.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
See "Setting IP address" on page 148.
Configuring the machine’s wireless network
•
Access point
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
•
Network-connected computer
To configure wireless parameters, you can use SyncThru™ Web Service.
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
Network cable
Items to prepare
2. Using a Network-Connected Machine
183
Wireless network setup
Using SyncThru™ Web Service
Wizard will help you setup the wireless network configuration. However, if
you want to set the wireless network directly, select Custom.
Before starting wireless parameter configuration, check the cable connection
status.
1
Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
2
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
7
For example,
3
4
5
6
Select the one Network Name(SSID) in the list.
•
SSID: SSID (Service Set Identifier) is a name that identifies a wireless
network, access points, and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case sensitive.
•
Operation Mode: Operation Mode refers to the type of wireless
connections (see "Wireless network name and network password"
on page 159).
Click Login on the upper right of the SyncThru™ Web Service website.
-
Ad-hoc: Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
-
Infrastructure: Allows wireless devices to communicate with
each other through an access point.
•
ID: admin
•
Password: sec00000
When the SyncThru™ Web Service window opens, click Network
Settings.
Click Wireless > Wizard.
If your network’s Operation Mode is Infrastructure, select the SSID of the
access point. If the Operation Mode is Ad-hoc, select the machine’s SSID.
8
Click Next.
If the wireless security setting window appears, enter the registered
password (network password) and click Next.
2. Using a Network-Connected Machine
184
Wireless network setup
9
The confirmation window appears, please check your wireless setup. If
the setup is right, click Apply.
3
4
Disconnect the network cable (standard or network). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
10
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
Click Login on the upper right of the SyncThru™ Web Service website.
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
•
ID: admin
•
Password: sec00000
5
When the SyncThru™ Web Service window opens, click Network
Settings.
6
Click Wireless > Custom.
18
Turning the Wi-Fi network on/off
You can also turn the Wi-Fi network on/off.
If your machine has a display, you can also turn on/off the Wi-Fi from the
machine’s control panel using the Network menu.
1
Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
2
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
2. Using a Network-Connected Machine
185
Wireless network setup
Setting up Wi-Fi Direct
19
Setting the Wi-Fi Direct for mobile printing
You can enable Wi-Fi Direct feature by one of the following methods.
Wi-Fi Direct is an easy-to-setup peer-to-peer connection method between the
Wi-Fi Direct certified printer and a mobile device that provides a secure
connection and better throughput than ad hoc mode.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point. You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
From the USB cable-connected computer(recommended)
After the driver installation is complete, Samsung Easy Printer Manager can be
used to change Wi-Fi Direct settings.
Samsung Easy Printer Manager is Available for Windows
and Mac OS users only.
• You cannot connect your mobile device to the internet through the
printer’s Wi-Fi Direct.
• The supported protocol list may differ from your model, Wi-Fi Direct
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP
services.
• The maximum number of devices that can be connected via Wi-Fi Direct
is 3.
•
From the Start menu, select Programs or All Programs > Samsung
Printers > Samsung Easy Printer Manager > Device Settings > Network.
-
Wi-Fi Direct On/Off: Select On to enable.
-
Device Name: Enter the printer’s name for searching for your printer on
a wireless network. By default, the device name is the model name.
-
IP Address: Enter the IP address of the printer. This IP address is used
only for the local network and not for the infrastructure wired or wireless
network. We recommend using the default local IP address (the default
local IP address of the printer for Wi-Fi Direct is 192.168.3.1)
-
Group Owner: Activate this option to assign the printer the Wi-Fi Direct
group’s owner. The Group Owner acts similar to a wireless access point.
We recommend activating this option.
2. Using a Network-Connected Machine
186
Wireless network setup
-
Network Password: If your printer is a Group Owner, a Network
Password is required for other mobile devices to connect to your
printer. You can configure a network password yourself, or can
remember the given Network Password that is randomly generated by
default.
• For Linux OS users,
- Print an IP network configuration report to check the output (see
"Printing a network configuration report" on page 148).
- Access SyncThru Web Service, select Settings > Network Settings
> Wireless > Wi-Fi Direct.
- Enable or disable Wi-Fi Direct.
From the machine (Machines with a display screen)
•
Select Network > Wireless > Wi-Fi Direct from the control panel.
•
Enable Wi-Fi Direct.
From the machine (Machines without a display screen)
•
Press and hold the
(WPS) button on the control panel for about 10- 15
seconds. Wi-Fi Direct feature turns on.
•
Press and hold the
(WPS) button on the control panel for more than 15
seconds. Wi-Fi Direct feature turns off.
From the network-connected computer
If your printer is using a network cable or a wireless access point, you can enable
and configure Wi-Fi Direct from SyncThru™ Web Service.
•
Access SyncThru™ Web Service, select Settings > Network Settings >
Wireless > Wi-Fi Direct.
•
Enable or disable Wi-Fi Direct and set other options.
Setting up the mobile device
•
After setting up Wi-Fi Direct from the printer, refer to the user manual of the
mobile device you are using to set its Wi-Fi Direct.
•
After setting up Wi-Fi Direct, you need to download the mobile printing
application (For example: Samsung Mobile printer) to print from your
smartphone.
• When you have found the printer you want to connect to from your
mobile device, select the printer and the printer's LED will blink. Press the
WPS button on the printer and it will be connected to your mobile
device.
•
If your mobile device does not support WPS, you need to enter the
“Network Key” of a printer instead of pushing the WPS button.
2. Using a Network-Connected Machine
187
Wireless network setup
Connecting Failure - General Connection Error
20
Troubleshooting
•
Your computer is not receiving a signal from your machine. Check the USB
cable and your machine’s power.
Problems during setup or driver installation
Connecting Failure - Connected Wired Network
Printers Not Found
•
Your machine may not be turned on. Turn on your computer and the
machine.
•
USB cable is not connected between your computer and machine. Connect
the machine to your computer using the USB cable.
•
The machine does not support wireless networking. Check the machine's
user's guide included on the software CD supplied with your machine and
prepare a wireless network machine.
Connecting Failure - SSID Not Found
•
The machine is unable to find the network name (SSID) you have selected or
entered. Check the network name (SSID) on your access point and try
connecting again.
•
Your access point is not turned on. Turn on your access point.
•
Your machine is connected with a wired network cable. Remove the wired
network cable from your machine.
Connecting Failure - Assigning the IP address
•
Cycle the power for the access point (or wireless router) and machine.
PC Connection Error
•
The configured network address is unable to connect between your
computer and machine.
-
For a DHCP network environment
The receives the IP address automatically (DHCP) when computer is
configured to DHCP.
Connecting Failure - Invalid Security
•
Security is not configured correctly. Check the configured security on your
access point and machine.
2. Using a Network-Connected Machine
188
Wireless network setup
If the printing job is not working in DHCP mode, the problem may be caused
by the automatically changed IP address. Compare the IP address between
the product's IP address and the printer port's IP address.
How to compare:
1 Print the network information report of your printer, and then check the
IP address (see "Printing a network configuration report" on page 148).
2 Check the printer port's IP address from your computer.
a Click the Windows Start menu.
• For Windows 8, from Charms, select Search > Settings.
b For Windows XP/Server 2003, select Printer and Faxes.
• For Windows Server 2008/Vista, select Control Panel > Hardware
and Sound > Printers.
• For Windows 7/8, select Control Panel > Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
c Right-click your machine.
d For Windows XP/2003/2008/Vista, press Properties.
For Windows 7/8 and Windows Server 2008 R2, from context menus,
select the Printer properties.
If Printer properties item has ► mark, you can select other printer
drivers connected with selected printer.
e Click Port tab.
f Click Configure Port... button.
g Check if Printer Name or IP Address: is the IP address on the network
configuration Sheet.
3 Change the printer port's IP address if it is different from the network
information report's.
If you want to use the software installation CD to change the port IP,
connect to a network printer. Then reconnect the IP address.
-
For a Static network environment
The machine uses the static address when the computer is configured
to static address.
For example,
If the computer’s network information is as shown below:
▪
IP address: 169.254.133.42
▪
Subnet Mask: 255.255.0.0
Then the machine’s network information should be as below:
▪
IP address: 169.254.133.43
▪
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
▪
Gateway: 169.254.133.1
2. Using a Network-Connected Machine
189
Wireless network setup
Other problems
•
Check whether the access point (or wireless router) has a configured
security (password). If it has a password, refer to the access point (or wireless
router) administrator.
•
Check the machine's IP address. Reinstall the machine driver and change the
settings to connect to the machine on the network. Due to the
characteristics of DHCP, the allocated IP address could change if the
machine is not used for a long time or if the access point has been reset.
If problems occur while using the machine on a network, check the following:
For information on the access point (or wireless router), refer to its own
user's guide.
Register the product's MAC address when you configure the DHCP server on
the access point (or wireless router). Then you can always use the IP address
that is set with the MAC address. You can identify the Mac address of your
machine by printing a network configuration report (see "Printing a network
configuration report" on page 148).
•
You cannot enable wired and wireless networks at the same time.
•
Your computer, access point (or wireless router), or machine may not be
turned on.
•
Check the wireless reception around the machine. If the router is far from
the machine or there is an obstacle, you might have difficulty receiving the
signal.
•
Check the wireless environment. You might not be able to connect to the
network in the infrastructure environment where you need to type in a
user's information before connecting to the access point (or wireless router).
Cycle the power for the access point (or wireless router), machine, and
computer. Sometimes cycling the power can recover network
communication.
•
This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless
communication types (e.g., Bluetooth) are not supported.
•
When using the ad hoc mode, in operating systems such as Windows Vista,
you might need to set the wireless connection setting every time you use
the wireless machine.
•
You cannot use infrastructure mode and ad hoc mode at the same time for
Samsung wireless network machines.
•
The machine is within the range of the wireless network.
•
•
Check whether firewall software (V3 or Norton) is blocking the
communication.
If the computer and the machine are connected on the same network and it
cannot be found when searching, firewall software might be blocking the
communication. Refer to the user's guide for the software to turn it off and
try searching for the machine again.
•
Check whether the machine's IP address is allocated correctly. You can
check the IP address by printing the network configuration report.
2. Using a Network-Connected Machine
190
Wireless network setup
•
The machine is located away from obstacles that could block the wireless
signal.
Remove any large metal objects between the access point (or wireless
router) and the machine.
Make sure the machine and wireless access point (or wireless router) are not
separated by poles, walls, or support columns containing metal or concrete.
•
The machine is located away from other electronic devices that may
interfere with the wireless signal.
Many devices can interfere with the wireless signal, including a microwave
oven and some Bluetooth devices.
•
Whenever the configuration of your access point (or wireless router)
changes, you must do the product's wireless network setup again.
•
The maximum number of devices that can be connected via Wi-Fi Direct is
3.
•
If Wi-Fi Direct is ON, this machine only supports IEEE 802.11 b/g.
•
If the access point is set to work with the 802.11n standard only, it may not
connect to your machine.
2. Using a Network-Connected Machine
191
Samsung Mobile Print
21
23
Supported Mobile OS
What is Samsung Mobile Print?
Samsung Mobile Print is a free application that enables users to print photos,
documents, and web pages directly from your smartphone or tablet. Samsung
Mobile Print is not only compatible with your Android and iOS smart phones
but also with your iPod Touch and tablet PC. It connects your mobile device to a
network connected Samsung printer or to a wireless printer through a Wi-Fi
access point. Installing a new driver or configuring network settings isn’t
necessary – just simply install the Samsung Mobile Print application, and it will
automatically detect compatible Samsung printers. Besides printing photos,
web pages, and PDFs, scanning is also supported. If you have a Samsung
multifunction printer, scan any document into a JPG, PDF, or PNG format for
quick and easy viewing on your mobile device.
•
Android OS 2.1 or higher
•
iOS 4.0 or higher
24
Supported devices
•
iOS 4.0 or higher: iPod Touch, iPhone, iPad
•
Android 2.1 or higher: Galaxy series and Android mobile devices
22
Downloading Samsung Mobile Print
To download Samsung Mobile Print, go to the application store (Samsung
Apps, Play Store, App Store) on your mobile device, and just search for
“Samsung Mobile Print.” You can also visit iTunes for Apple devices on your
computer.
2. Using a Network-Connected Machine
192
Using the NFC feature
The NFC(Near Field Communication) printer allows you to directly print/scan
from your cell phone just by holding your cell phone over the NFC tag on your
printer. It does not require installing print driver or connecting to an access
point. You just need NFC supported cell phone. In order to use this feature,
Samsung Mobile Print app needs to be installed on your cell phone.
• Depending on the material of the cell phone cover, NFC recognition may
not work properly.
• Depending on the cell phone you are using, the tranmission speed may
differ.
26
Printing
1
Check that NFC and Wi-Fi Direct features are enabled on your cell phone
and Wi-Fi Direct feature is enabled on your printer (see "Setting up Wi-Fi
Direct" on page 186).
2
Tag the NFC antenna on your cell phone (usually located on the back of
the cell phone) over the NFC tag(
) on your printer.
Wait few seconds for Samsung Mobile Print app to start.
25
Requirements
•
NFC and Wi-Fi Direct enabled, Mobile Print app installed cell phone with
Android OS 4.0 or higher.
Only Android OS 4.1 or higher will automatically enable the Wi-Fi Direct
feature on your cell phone when you enable the NFC feature. We
recommend you to upgrade your cell phone to Android OS 4.1 or higher to
use the NFC feature.
•
Wi-Fi Direct feature enabled printer. Wi-Fi Direct feature is enabled by
default.
2. Using a Network-Connected Machine
193
Using the NFC feature
• For some cell phones, NFC antenna might not be located at the back of
the cell phone. Check the location of the NFC antenna on your cell phone
before tagging.
• For some cell phones, NFC antenna might not be located at the back of
the cell phone. Check the location of the NFC antenna on your cell phone
before tagging.
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
• If you do not have Samsung Mobile Print app installed on your cell
phone, it automatically connects to Samsung Mobile Print app
download page. Download the app and try again.
3
The printer starts printing.
Select the content you want to print.
If neccessary, change the print option by pressing the
4
5
.
Tag the NFC antenna on your cell phone(usually located on the back of
the cell phone) over the NFC tag(
) on your printer.
Wait few seconds for the cell phone to connect to the printer.
2. Using a Network-Connected Machine
194
Using the NFC feature
27
• For some cell phones, NFC antenna might not be located at the back of
the cell phone. Check the location of the NFC antenna on your cell phone
before tagging.
Scanning
1
Check that NFC and Wi-Fi Direct enabled features are on your cell phone
and Wi-Fi Direct feature is enabled on your printer (see "Setting up Wi-Fi
Direct" on page 186).
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
2
Tag the NFC antenna on your cell phone(usually located on the back of
the cell phone) over the NFC tag(
) on your printer.
• If you do not have Samsung Mobile Print app installed on your cell
phone, it automatically connects to Samsung Mobile Print app
download page. Download the app and try again.
Wait few seconds for Samsung Mobile Print app to start.
3
4
Select scan mode.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
If neccessary, change the scan option by pressing the
.
2. Using a Network-Connected Machine
195
Using the NFC feature
5
Tag the NFC antenna on your cell phone(usually located on the back of
the cell phone) over the NFC tag(
) on your printer.
28
Registering Google Cloud Printer
Wait few seconds for the cell phone to connect to the printer.
1
Check that NFC and Wi-Fi Direct features are enabled on your mobile
device and Wi-Fi Direct feature is enabled on your printer.
2
Tag the NFC tag on your mobile device (usually located on the back of
the mobile device) over the NFC tag(
) on your printer.
Wait a few seconds for the Samsung Mobile Print app to start.
• For some cell phones, NFC antenna might not be located at the back of
the cell phone. Check the location of the NFC antenna on your cell phone
before tagging.
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
6
The printer starts scanning the content.
The scanned data is saved on your cell phone.
If you want to continue scanning, follow the instruction on the app screen.
2. Using a Network-Connected Machine
196
Using the NFC feature
• For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
• For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
• If error message about changed PIN number appears, enter a changed
PIN number and press OK. Follow the instruction on the app screen to
update the PIN number.
• If your do not have Samsung Mobile Print app installed on your mobile
devices, it automatically connects to Samsung Mobile Print app
download page. Download the app and try again.
6
Confirm your printer in pop-up window.
Now your printer is registered with Google Cloud Print™ service
3
4
5
Select device status icon.
Select Google Cloud Print > Register Google Cloud Printer.
Tag the NFC tag on your mobile device (usually located on the back of
the mobile device) over the NFC tag(
) on your printer.
Wait a few seconds for the mobile device to connect to the printer.
2. Using a Network-Connected Machine
197
AirPrint
Only AirPrint certified machines can use the AirPrint feature. Check the box
your machine came in for the AirPrint certified mark.
4
AirPrint allows you to wirelessly print directly from iPhone, iPad and
iPod touch running the latest version of iOS.
Bonjour(mDNS) and IPP protocols are required on your machine to use the
AirPrint feature. You can enable the AirPrint feature by one of the following
methods.
1
2
•
ID: admin
•
Password: sec00000
5
When the Embedded Web Service window opens, click Settings >
Network Settings.
6
Click Raw TCP/IP, LPR, IPP or mDNS.
29
Setting up AirPrint
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and Password.
We recommend you to change the default password for security
reasons.
You can enable the IPP protocol or mDNS protocol.
Check whether the machine is connected to the network.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
3
Click Login in the upper right of the SyncThru™ Web Service website.
2. Using a Network-Connected Machine
198
AirPrint
30
Printing via AirPrint
For example, the iPad manual provides these instructions:
1
2
3
4
Open your email, photo, web page, or document you want to print.
Touch the action icon(
).
Select your printer driver name and option menu to set up.
Touch Print button. Print it out.
Cancelling print job: To cancel the printing job or view the print summary,
click the print center icon (
) in multitasking area. You can click cancel in
the print center.
2. Using a Network-Connected Machine
199
Google Cloud Print
Google Cloud Print™ is a service that allows you to print to a printer using your
smart phone, tablet, or any other web-connected devices. Just register your
Google account with the printer, and you are ready to use the Google Cloud
Print service. You can print your document or email with Chrome OS, Chrome
browser, or a Gmail™/ Google Docs™ application on your mobile device, so you
5
Click Login in the upper right corner of the SyncThru™ Web Service
website.
6
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and Password.
We recommend you to change the default password for security
reasons.
don’t need to install the printer driver on the mobile device. Refer to the Google
website (http://support.google.com/cloudprint) for more information about
Google Cloud Print.
•
ID: admin
•
Password: sec00000
31
Registering your Google account to the printer
If the network environment is using a proxy server, you need to configure
the proxy’s IP and port number from Settings > Network Settings >
Google Cloud Print > Proxy Setting. Contact your network service
provider or network administrator for more information.
• Make sure the printer machine is turned on and connected to a wired or
wireless network that has access to the Internet.
• You should create your Google account in the advance.
1
2
3
4
Open the Chrome browser.
Visit www.google.com.
Sign in to the Google website with your Gmail address.
Enter your printer’s IP address in the address field and press the Enter key
or click Go.
7
When the SyncThru™ Web Service window opens, click Settings >
Network Settings > Google Cloud Print.
8
9
Enter your printer’s name and description.
Click Register.
The confirmation pop-up window appears.
If you set the browser to block pop-ups, the confirmation window will not
appear. Allow the site to show pop-ups.
2. Using a Network-Connected Machine
200
Google Cloud Print
10
11
Click Finish printer registration.
Click Manage your printers.
32
Printing with Google Cloud Print
Now your printer is registered with Google Cloud Print service.
The printing procedure varies depending on the application or the device you
Google Cloud Print-ready devices will appear in the list.
are using. You can see the application list that supports Google Cloud Print
service.
Make sure the printer is turned on and connected to a wired or wireless
network that has access to the Internet.
Printing from an application on mobile device
The following steps are an example of using the Google Docs app from Android
mobile phone.
1
Install the Cloud Print application on your mobile device.
If you do not have the application, download it from the application store
such as Android Market or App Store.
2
3
4
Access the Google Docs application from your mobile device.
Tap the option
Tap the send
button of the document that you want to print.
button.
2. Using a Network-Connected Machine
201
Google Cloud Print
5
6
7
Tap the Cloud Print
button.
Set the printing options if you want.
Tap Click here to Print.
Printing from the Chrome browser
The following steps are an example of using the Chrome browser.
1
2
3
4
5
6
Run Chrome.
Open the document or email that you want to print.
Click the wrench icon
in the browser’s top right corner.
Click Print. A new tab for printing appears.
Select Print with Google Cloud Print.
Click the Print button.
2. Using a Network-Connected Machine
202
3. Useful Setting Menus
This chapter explains how to browse the current status of your machine, and the method of setting for advanced
machine setup.
• Before you begin reading a chapter
204
• Print
205
• Copy
206
• Fax
209
• Scan
213
• System setup
215
• Network setup
221
Before you begin reading a chapter
This chapter explains all the features available for this series' models to help users easily understand the features.
You can check the features available for each model in the Basic Guide (see "Menu overview" on page 31).
The following are tips for using this chapter
•
The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing
•
Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
•
For models that do not have the
•
Some menu names may differ from your machine depending on its options or the models.
(Menu).
(Menu) on the control panel, this feature is not applicable (see "Control panel overview" on page 23).
3. Useful Setting Menus
204
Print
Item
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
Affects the resolution and clarity of your color output.
Screen
To change the menu options:
Description
(Menu) > Print Setup on the control panel.
• Enhanced: This mode will generate printouts with
sharp texts and smooth graphic/photo objects in the
page.
• Detailed: This mode will generate printouts with
sharp details over the entire page.
• Normal: This mode will generate printouts with
smooth tone over the entire page.
Item
Description
Clear Text
Orientation
Selects the direction in which information is printed on a
page.
Selects this option to print texts clearer than on a normal
document.
Auto CR
Copies
You can enter the number of copies using the number
keypad.
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Emulation
Sets the emulation type and option.
Resolution
Specifies the number of dots printed per inch (dpi). The
higher the setting, the sharper printed characters and
graphics.
Trapping
Reduces the white gap caused by misalignment of color
channels in color printing mode. Also black text will be
overprinted on other colors.
Document Type
Improves the printing quality by selecting the document
type for the current printing job.
3. Useful Setting Menus
205
Copy
1
Item
Copy feature
Darkness
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 59)
Original Type
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 59)
Layout
Adjusts the layout format such as poster, clone, ID copy,
2/4-up, booklet, etc.
To change the menu options:
• C46xW: When the Scan to button’s LED is off, the machine is in copy
mode.
• C46xFW: Press
(copy) on the control panel.
Item
Original Size
Reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
(Menu) > Copy Feature on the control panel.
1
2
3
4
2
In copy mode, press
Layout > 2-up or
Layout > 4-up
1
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Description
This copy feature is available only when you
load originals into the document feeder.
Description
Sets the image size.
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 60).
Reduce/Enlarge
Layout > ID Copy
prints one side of the original on the upper half of the
paper and the other side on the lower half without
reducing the size of the original. This feature is helpful
for copying a small-sized item such as business card.
If the machine is set to Eco mode, reduce and
enlarge features are not available.
3. Useful Setting Menus
206
Copy
2
Item
Description
Prints an image without its background. This copy
feature removes the background color and can be
helpful when copying an original containing color in
the background, such as a newspaper or a catalog.
Adjust Bkgd
• Off: Does not use this feature.
Copy Setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
• Auto: Optimizes the background.
• Enhance Lev.1~2: The higher the number is, the
more vivid the background is.
To change the menu options:
• Erase Lev.1~4: The higher the number is, the lighter
the background is.
In copy mode, press
(Menu) > Copy Setup on the control panel.
• C46xW: When the Scan to button’s LED is off, the machine is in copy
mode.
• C46xFW: Press
Item
(copy) on the control panel.
Description
Change Default
Resets the value or setting to the printer’s out-of-box
state.
Change Default >
Copies
You can enter the number of copies using the number
keypad.
3. Useful Setting Menus
207
Copy
Item
Description
Set the machine to sort the copy job. For example, if you
make 2 copies of a 3 page original, one complete 3 page
document will print followed by a second complete
document.
• On: Prints output in sets to match the sequence of
originals.
Item
Description
Change Default >
Darkness
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 59)
Change Default >
Original Type
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 59)
Prints an image without its background. This copy
feature removes the background color and can be
helpful when copying an original containing color in
the background, such as a newspaper or a catalog.
Change Default >
Copy Collation
• Off: Prints output sorted into stacks of individual
pages.
Change Default >
Adjust Bkgd
• Off: Does not use this feature.
• Auto: Optimizes the background.
• Enhance Lev.1~2: The higher the number is, the
more vivid the background is.
• Erase Lev.1~4: The higher the number is, the lighter
the background is.
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 60).
Change Default >
Reduce/Enlarge
If the machine is set Eco mode, reduce and
enlarge features are not available.
3. Useful Setting Menus
208
Fax
3
Item
Fax Feature
Description
Sends a fax to multiple destinations (see "Sending a fax
to multiple destinations" on page 66).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Multi Send
You cannot send a color fax using this feature.
Sets your machine to send a fax at a later time when you
will not be present (see "Delaying a fax transmission" on
page 251).
To change the menu options:
•
Press
(fax) >
(Menu)> Fax Feature on the control panel.
Delay Send
You cannot send a color fax using this feature.
Item
Description
Darkness
Adjusts the brightness level to scan an original that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 68).
Priority Send
Resolution
The default document settings produce good results
when using typical text-based originals. However, if you
send originals that are of poor quality, or contain
photographs, you can adjust the resolution to produce
a higher quality fax (see "Resolution" on page 67).
Scans the original into memory and immediately
transmits it when the current operation is finished.
Priority transmission will interrupt a sending to multiple
destinations between stations (example, when the
transmission to station A ends, before transmission to
station B begins) or between redial attempts (see
"Sending a priority fax" on page 253).
Sets the image size.
Send Forward
Forwards the sent fax to other destination by a fax. See
"Forwarding a sent fax to another destination" on page
253.
Original Size
3. Useful Setting Menus
209
Fax
Item
Rcv. Forward
Secure Receive
Add Page
Cancel Job
Description
Forwards the received fax to other destination by a fax
or PC. If you are out of office but have to receive the fax,
this feature may be useful. See "Forwarding a received
fax" on page 254.
Stores the received fax in memory without printing out.
To print received documents, you need to enter the
password. You can prevent your received faxes from
being accessed by unauthorized people (see "Receiving
in secure receiving mode" on page 257).
To change the menu options:
•
Press
(fax) >
Item
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term
Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
Fax Confirm.
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
select On-Error, the machine prints a report only when
a transmission is not successful.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Cancels the delayed fax job which is saved in memory
(see "Canceling a reserved fax job" on page 252).
Sending setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Description
Redial Times
Adds additional documents to a reserved delay fax job
(see "Adding documents to a reserved fax" on page
252).
4
(Menu) > Fax Setup > Sending on the control panel.
3. Useful Setting Menus
210
Fax
5
Item
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Auto Reduction
Automatically reduces an incoming fax page to fit the
size of the paper loaded in the machine.
Discard Size
Discards a specific length from the end of the received
fax.
Junk Fax Setup
Blocks any unwanted faxes that you stored in the
memory as junk fax numbers. This setting may not be
available depending on your country.
DRPD Mode
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 256).
To change the menu options:
•
Press
(fax) >
Item
(Menu) > Fax Setup > Receiving on the control panel.
Description
Receive Mode
Selects the default fax receiving mode.
Ring To Answer
Specifies the number of times the machine rings before
answering an incoming call.
Stamp RCV Name
Automatically prints the page number, and the date
and time of reception at the bottom of each page of a
received fax.
Rcv Start Code
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Description
3. Useful Setting Menus
211
Fax
6
Another setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
(fax) >
Item
(Menu) > Fax Setup on the control panel.
Description
Change Default
Resets the value or setting to the printer’s out-of-box
state.
Auto Report
Sets the machine to print a report with detailed
information about the previous 50 communication
operations including time and dates.
Manual TX/RX
Setting this option to ON provides the ability to send or
receive a fax while the line is busy. You can select to
send or receive a fax by either picking up the extension
phone receiver and pressing the Start button or by
pressing the On Hook Dial button and pressing the
Start button.
3. Useful Setting Menus
212
Scan
7
Item
Scan feature
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
in scan mode, press
USB Feature >
Resolution
Sets the image resolution.
USB Feature >
Color Mode
Sets the color mode.
USB Feature >
File Format
To change the menu options:
(Menu) > Scan Feature on the control panel.
Description
USB Feature >
Darkness
Sets the file format in which the image is to be saved. If you
select BMP, JPEG, TIFF, or PDF, you can select to scan
multiple pages.
Adjusts the brightness level to scan.
• C46xW: When the Scan to button’s LED is on, the machine is in scan
mode.
• C46xFW: Press
(scan) on the control panel.
Item
USB Feature
Description
Sets scan destination to a USB. You scan the originals and
save the scanned image to a USB device.
USB Feature >
Original Size
Sets the image size.
USB Feature >
Original Type
Sets the original document’s type.
3. Useful Setting Menus
213
Scan
8
Scan setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
In scan mode, press
(Menu) > Scan Setup on the control panel.
• C46xW : When the Scan to button’s LED is on, the machine is in scan
mode.
• C46xFW: Press
Item
(scan) on the control panel.
Description
Change Default
Resets the value or setting to the printer’s out-of-box
state.
Change Default >
USB Default
Resets the USB scan setting to the printer’s out-of-box
state.
3. Useful Setting Menus
214
System setup
9
Item
Machine setup
Description
Sets how long the machine waits before going to power
save mode.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
Power Save
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
Auto Power Off
Turns power off automatically when the machine has
been in power save mode for the length of time set in
Auto Power Off > On > Timeout.
(Menu) > System Setup > Machine Setup on the control panel.
• This option only appears in the C46xW.
Item
Description
Machine ID
Sets the machine ID which will be printed at the top of
each fax page that you send.
• To turn the machine on again, press the
(Power/Wakeup) button on the control panel
(make sure the main power switch is on).
Fax Number
Sets the fax number which will be printed at the top of
each fax page that you send.
• If you run the printer driver or Samsung Easy
Printer Manager, the time automatically
extends.
Date & Time
Sets the date and time.
Clock Mode
Selects the format for displaying time between 12 hr. and
24 hr.
Language
Sets the language of the text that appears on the control
panel display.
• While the machine is connected to the
network or working on a print job, Auto
Power Off feature doesn't work.
3. Useful Setting Menus
215
System setup
Item
Description
Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
You can set the condition to wake up from power-save
mode.
• On: The machine wake up from the power save mode
on the following cases:
Wakeup Event
- Pressing any button
- Opening or closing the paper tray
Auto Continue
- Inserting paper in the document feeder
Job Timeout
Altitude Adj.
Optimize print quality according to the machine’s
altitude.
Humidity
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Sets the time that the machine remembers previously
used copy settings. After the timeout, the machine
restores the default copy settings.
Sets the length of time the printer waits before printing
the last page of a print job that does not end with a
command to print the page.
Optimizes print quality according to the humidity in the
environment.
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
• 0 Sec: Even though a paper mismatch occurs, the
machine continues printing.
• Off: The machine wake up from the power save mode
only when the Power/Wakeup button is pressed.
System Timeout
Description
Paper Substit.
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
PrintBlankPage
The printer detects the printing data from computer
whether a page is empty or not. You can set to print or
skip the blank page.
3. Useful Setting Menus
216
System setup
10
Item
Description
Paper setup
Allows you to save print resources and enables ecofriendly printing.
• Default Mode: Select whether to turn the Eco mode
on or off.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Eco Settings
On force (On-Forced): Sets the Eco mode on with
password. If a user wants to turn the Eco mode
on/off, the user needs to enter the password.
To change the menu options:
•
Press
• Select Template: Selects the eco template set from
the SyncThru™ Web Service.
Item
(Menu) > System Setup > Paper Setup on the control panel.
Description
Paper Size
Sets the paper size as A4, Letter, or other paper sizes,
according to your requirements.
Paper Type
Chooses the type of the paper for each tray.
Margin
Sets the margins for the document.
3. Useful Setting Menus
217
System setup
11
Item
Sound / Volume
Turns on or off the sounds from the telephone line
through the speaker, such as a dial tone or a fax tone.
With this option set to Comm. which means the speaker
is on until the remote machine answers.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
Speaker
•
Press
(Menu) > System Setup > Sound/Volume on the control panel.
Item
Turns the key sound on or off. With this option set to on,
a tone sounds each time a key is pressed.
Alarm Sound
Turns the alarm sound on or off. With this option set to
on, an alarm tone sounds when an error occurs or fax
communication ends.
You can adjust the volume level using On Hook
Dial. You can adjust the speaker volume only
when the telephone line is connected.
a Press
(fax) on the control panel.
b Press On Hook Dial. A dial tone sounds from
the speaker.
c Press the arrows until you hear the volume you
want.
d Press On Hook Dial to save the change and
return to ready mode.
Description
Key Sound
Description
Ringer
Adjusts the ringer volume. For the ringer volume, you can
select off, low, middle, and high level.
3. Useful Setting Menus
218
System setup
12
Item
Report
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
Description
Fax Confirm.
Prints a transmission report including the fax
number, the number of pages, the elapsed time
of the job, the communication mode, and the
communication results for fax job. You can set up
your machine to automatically print a
transmission confirmation report after each fax
job.
Fax Sent
Prints information on the faxes you have recently
sent.
Fax Received
Prints information on the faxes you have recently
received.
Schedule Jobs
Prints the document list currently stored for
delayed faxes along with the starting time and
type of each operation.
JunkFax
Prints the fax numbers specified as junk fax
numbers.
Network Conf.
Prints information on your machine’s network
connection and configuration.
Usage Counter
Prints a usage page. The usage page contains the
total number of pages printed.
Fax Options
Prints the information of a fax report.
(Menu) > System Setup > Report on the control panel.
Item
Description
Configuration
Prints a report on the machine's overall
configuration.
Supplies Info.
Prints supplies’ information page.
Demo Page
Address Book
Prints the demo page to check whether your
machine is printing properly or not.
Prints all of the fax number currently stored in
the machine’s memory.
3. Useful Setting Menus
219
System setup
13
Item
Maintenance
Description
Allows you to adjust the color setting such as contrast
level, color registration, color density, etc.
• Custom Color: adjusts contrast, color by color.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
- Default: optimizes colors automatically.
Image Mgr.
To change the menu options:
•
Press
• Tone Adjust.: The machine calibrates the toner
density of machine for the best possible color print
quality.
(Menu) > System Setup > Maintenance on the control panel.
Item
- Print Density: allows you to manually adjust the
color contrast for each cartridge. It is
recommended to use the Default setting for best
color quality.
Description
CLR Empty Msg.
When toner cartridge is empty, this option appears. You
can clear the empty message.
Supplies Life
Shows the supply life indicators (see "Monitoring the
supplies life" on page 87.)
Serial Number
Shows the machine’s serial number. When you call for
service or register as a user on the Samsung website, you
can find this.
TonerLow Alert
Customizes the level to alert toner low or toner empty
(see "Setting the toner low alert" on page 88).
3. Useful Setting Menus
220
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
Option
Description
You can activate or deactivate the following protocols.
• Net. Activate: You can set whether to use Ethernet on
or off.
(Menu)> Network on the control panel.
Option
Turn the power off and on after you change this
option.
Description
Selects the appropriate protocol and configure
parameters to use the network environment.
TCP/IP (IPv4)
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 156).
Ethernet Speed
Configure the network transmission speed.
Wireless
Selects this option to use the wireless network.
Clear Setting
Reverts the network settings to the default values.
(Reboot required.)
Network Conf.
This list shows information on your machine’s network
connection and configuration.
• Http Activate: You can set whether to use SyncThru™
Web Service or not.
Protocol Mgr.
Turn the power off and on after you change this
option.
• WINS: You can configure the WINS server.
WINS(Windows Internet Name Service) is used in the
Windows operating system.
Turn the power off and on after you change this
option.
3. Useful Setting Menus
221
Network setup
Option
Description
• SNMP V1/V2: You have to enable this option to use
SNMP V1/V2 protocol. Administrator’s can use SNMP
to monitor and manage machines on the network.
• UPnP(SSDP): You have to enable this option to use
UPnP(SSDP) protocol.
Turn the power off and on after you change this
option.
Protocol Mgr.
(continued.)
• MDNS: You have to enable this option to use MDNS
(Multicast Domain Name System) protocol.
• SetIP: You have to enable this option to use SetIP
protocol.
• SLP: You can configure SLP (Service Location
Protocol) settings. This protocol allows host
applications to find services in a local area network
without prior configuration.
Turn the power off and on after you change this
option.
3. Useful Setting Menus
222
4. Special Features
This chapter explains special copying, scanning, faxing, and printing features.
• Altitude adjustment
224
• Entering various characters
225
• Setting up the fax address book
226
• Printing features
229
• Scan features
241
• Fax features
250
• The procedures in this chapter are mainly based on Windows 7.
• It may be necessary to press OK to navigate to lower-level menus for some models.
Altitude adjustment
Print quality is affected by atmospheric pressure, which is determined by the
height of the machine above sea level. The following information will guide you
on how to set your machine for the best print quality.
Before you set the altitude value, determine the altitude where you are.
•
Normal: 0-1,000 m(3,280 ft)
•
High1: 1,000 m(3,280 ft)-2,000 m(6,561 ft)
•
High2: 2,000 m(6,561 ft)-3,000 m(9,842 ft)
•
High3: 3,000 m(9,842 ft)-4,000 m(13,123 ft)
You can set the altitude value from Device Settings in Samsung Easy Printer
Manager program.
•
For Windows and Mac users, you set from Samsung Easy Printer Manager
>
(Switch to advanced mode) > Device Settings. See "Device
Settings" on page 269.
• If your machine is connected to the network, you can set the altitude via
SyncThru™ Web Service (see "Using SyncThru™ Web Service" on page
264).
• You can also set the altitude in System Setup option on the machine’s
display (see "Machine’s basic settings" on page 37).
4. Special Features
224
Entering various characters
As you perform various tasks, you may need to enter names and numbers. For
example, when you set up your machine, you enter your name or your
company’s name, and the fax number. When you store fax numbers or email
addresses in memory, you may also enter the corresponding names.
1
Entering alphanumeric characters
Press the button until the correct letter appears on the display. For example, to
enter the letter O, press 6, labeled with MNO. Each time you press 6, the display
shows a different letter, M, N, O, m, n, o and finally 6. To find the letter that you
want to enter, see "Keypad letters and numbers" on page 225.
• You can enter a space by pressing 1 twice.
• To delete the last digit or character, press the left/right or up/down arrow
button.
Key
Assigned numbers, letters, or characters
1
@/.’1
2
ABCabc2
3
DEFdef3
4
GHIghi4
5
JKLjkl5
6
MNOmno6
7
PQRSpqrs7
8
TUVtuv8
9
WXYZwxyz9
0
&+-,0
*
*%^_~!#$()[]
(These symbols are available when you type for network authentication.)
#
2
Keypad letters and numbers
#=|?":{}<>;
(These symbols are available when you type for network authentication.)
• Special character sets may differ from your machine depending on its
options or the models.
• Some of the follow key values may not appear depending on the job you
are doing.
4. Special Features
225
Setting up the fax address book
You can set up speed number with the fax numbers you use frequently via
SyncThru™ Web Service and then easily and quickly enter fax numbers by
entering the location numbers assigned to them in address book.
4
Using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number at which you stored the number you want.
3
Registering a speed dial number
1
2
Select
(fax) >
the control panel.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad for more than 2
seconds.
(Address Book) > New&Edit > Speed Dial on
• For a two- or three-digit speed dial number, press the first digit button(s)
and then hold down the last digit button for more than 2 seconds.
Enter a speed dial number and press OK.
• You can print the address book list by selecting
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
(fax) >
(Address Book) > Print.
(Back).
5
Editing speed dial numbers
3
4
5
Enter the name you want and press OK.
Enter the fax number you want and press OK.
Press the
1
Select
(fax) >
the control panel.
(Address Book) > New&Edit > Speed Dial on
2
3
4
5
Enter the speed dial number you want to edit and press OK.
(Cancel or Stop/Clear) button to return to ready mode.
Change the name and press OK.
Change the fax number and press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
226
Setting up the fax address book
6
7
Registering a group dial number
1
Select
(fax) >
the control panel.
(Address Book) > New&Edit > Group Dial on
2
Enter a group dial number and press OK.
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
(Back).
3
Search by entering the first few letters of the speed dial’s name to put in
the group.
4
5
6
7
Select the name and number you want and press OK.
8
Press
Select Yes when Add? appears.
Editing group dial numbers
1
Select
(fax) >
the control panel.
(Address Book) > New&Edit > Group Dial on
2
3
Enter the group dial number you want to edit and press OK.
Enter a new speed dial number to add and press OK, then Add? appears.
Enter a speed dial number stored in the group and press OK, Delete?
appears.
4
5
6
7
Press OK to add or delete the number.
Repeat step 3 to add or delete more numbers.
Select No at the Another No.? and press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
Repeat step 3 to include other speed dial numbers into the group.
When you have finished, select No when Another No.? appears and
press OK.
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
227
Setting up the fax address book
8
9
Searching address book for an entry
There are two ways to search for a number in memory. You can either scan from
A to Z sequentially, or you can search by entering the first letters of the name
associated with the number.
1
Select ct
(fax) >
(Address Book) > Search&Dial > Speed Dial
or Group Dial on the control panel.
Printing address book
You can check your
1
2
Select ct
(Address Book) settings by printing a list.
(fax) >
(Address Book) > Print on the control panel.
Press OK.
The machine begins printing.
2
3
Enter All or ID and press OK.
Press the name and number or the keypad button labeled with the letter
you want to search.
For example, if you want to find the name “MOBILE,” press the 6 button,
which is labeled with “MNO.”
4
Press
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
228
Printing features
• For basic printing features, refer to the Basic Guide (see "Basic printing"
on page 52).
If you want to change the settings for each print job, change it in Printing
Preferences.
• This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
11
Setting your machine as a default machine
10
Changing the default print settings
1
2
3
4
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Right-click on your machine.
1
2
3
4
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Select your machine.
Right-click your machine and select Set as Default Printer.
Select Printing preferences.
If Printing preferences has a ▶, you can select other printer drivers
connected to the selected printer.
If Printing preferences has a ▶, you can select other printer drivers
connected to the selected printer.
5
6
Change the settings on each tab.
Click OK.
4. Special Features
229
Printing features
12
Using advanced print features
1
Check the Print to file box in the Print window.
2
3
Click Print.
XPS printer driver: used to print XPS file format.
• See "Features by model" on page 7.
• The XPS printer driver can be installed only on Windows Vista OS or
higher.
• For models that provide XPS driver from the Samsung website, http://
www.samsung.com > find your product> Support or downloads.
Printing to a file (PRN)
You will sometimes need to save the print data as a file.
Type in the destination path and the file name, and then click OK.
For example, c:\Temp\file name.
If you type in only the file name, the file is automatically saved in My
Documents, Documents and Settings, or Users. The saved folder may
differ, depending on your operating system or the application you are
using.
4. Special Features
230
Printing features
Understanding special printer features
You can use advanced printing features when using your machine.
To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print
settings. The machine name that appears in the printer properties window may differ depending on the machine in use.
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Select the Help menu or click the
on page 55).
Item
Multiple Pages per
Side
button from the window or press F1 on your keyboard and click on any option you want to know about (see "Using help"
Description
Selects the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and
arranged in the order you specify. You can print up to 16 pages on one sheet.
4. Special Features
231
Printing features
Item
Poster Printing
Description
Prints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab
to make it easier to paste the sheets together.
Prints your document on both sides of a sheet of paper and arranges the pages so that the paper can be folded in half after printing to produce
a booklet.
Booklet Printing
• This option is available only when you use the PCL/SPL printer driver. This option is not available when you use XPS driver.
8
9
• The Booklet Printing option is not available for all paper sizes. Select the available paper Size option under the Paper tab to see what
paper sizes are available.
• If you select an unavailable paper size, this option can be automatically canceled. Select only available paper (paper without
mark).
or
4. Special Features
232
Printing features
Item
Description
Print on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented.
• This option is available only when you use the PCL/SPL printer driver. This option is not available when you use XPS driver.
• If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of
the document first. After that, a message appears on your computer.
• Skip Blank Pages feature does not work when you select the duplex option.
Double-sided
Printing (Manual)
• None: Disables this feature.
• Long Edge: This option is the conventional layout used in bookbinding.
• Short Edge: This option is the conventional layout used in calendars.
Paper Options
Changes the size of a document to appear larger or smaller on the printed page by entering in a percentage by which to enlarge or decrease the
document.
4. Special Features
233
Printing features
Item
Watermark
Watermark
(Creating a
watermark)
Watermark
(Editing a watermark)
Watermark
(Deleting a
watermark)
Description
The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters
reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document.
a To change the print settings from your software application, access Printing Preferences.
b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
c Enter a text message in the Watermark Message box.
You can enter up to 256 characters. The message displays in the preview window.
a
b
c
d
e
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options.
Click Update to save the changes.
Click OK or Print until you exit the Print window.
a
b
c
d
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to delete from the Current Watermarks list and click Delete.
Click OK or Print until you exit the Print window.
4. Special Features
234
Printing features
Item
Description
This option is available only when you use the PCL/SPL printer driver. This option is not available when you use XPS driver
Overlay
An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document.
Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing
exactly the same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load
preprinted letterhead paper in the machine: just print the letterhead overlay on your document.
To use a page overlay, you must create a new page overlay containing your logo or image.
• The overlay document size must be the same as the document you print with the overlay. Do not create an overlay with a watermark.
• The resolution of the overlay document must be the same as that of the document you will print with the overlay.
Overlay
(Creating a new page
overlay)
a
b
c
d
e
f
To save the document as an overlay, access Printing Preferences.
Click the Advanced tab, and select Edit from the Text drop-down list. Edit Overlay window appears.
In the Edit Overlay window, click Create.
In the Save As window, type a name in the File name box. Select the destination path, if necessary (The default is C:\Formover).
Click Save. The name appears on the Overlay List.
Click OK or Print until you exit the Print window.
The file is not printed. Instead, it is stored on your computer hard disk drive.
4. Special Features
235
Printing features
Item
Description
a Click the Advanced tab.
b Select the desired overlay from the Text drop-down list.
c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you
want to use.
If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window.
Overlay
After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay
(Using a page overlay)
List box.
d If necessary, check Confirm Page Overlay When Printing box. If this box is checked, a message window appears each time you submit a
document for printing, asking you to confirm printing an overlay on your document.
If this box is not checked and an overlay has been selected, the overlay automatically prints with your document.
e Click OK or Print until you exit the Print window.
Overlay
(Deleting a page
overlay)
a
b
c
d
e
f
In the Printing Preferences window, click the Advanced tab.
Select Edit in the Text drop down list.
Select the overlay you want to delete from the Overlay List box.
Click Delete.
When a confirming message window appears, click Yes.
Click OK or Print until you exit the Print window. You can delete page overlays that you no longer use.
4. Special Features
236
Printing features
Changing printer settings
13
Mac printing
You can use advanced printing features when using your machine.
Some features may not be available depending on models or options. It
means that the features are not supported.
Printing a document
When you print with a Mac, you need to check the printer driver settings in each
application you use. Follow the steps below to print from a Mac:
1
2
Open the document to print.
3
Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
4
5
6
Open the File menu and click Page Setup (Document Setup in some
applications).
Open the File menu and click Print.
Choose the number of copies and indicate which pages to print.
Open an application and select Print from the File menu. The machine name,
which appears in the printer properties window, may differ depending on the
machine in use. Except for the name, the composition of the printer properties
window is similar to the following.
Printing multiple pages on one sheet
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft copies.
1
2
Open an application, and select Print from the File menu.
3
4
Select the other options to use.
Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
Click Print.
The machine prints the selected number of pages to print on one sheet
of paper.
Click Print.
4. Special Features
237
Printing features
Printing on both sides of the paper
Some features may not be available depending on models or options. It
means that the features are not supported (see "Variety feature" on page
10).
Using help
Click the question mark on the bottom-left corner of the window and click on
the topic you want to know about. A pop-up window appears with information
about that option's feature, which is provided from the driver.
Before printing in the duplex mode, decide on which edge you will be binding
your finished document. The binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in book
binding.
•
Short-Edge Binding: This option is the type often used with calendars.
1
2
3
4
5
From your Mac application, select Print from the File menu.
Select Layout from the drop-down list under Orientation.
Select a binding orientation from the Two-Sided option.
Select the other options to use.
Click Print and the machine prints on both sides of the paper.
If you print more than 2 copies, the first copy and the second copy might
print on the same sheet of paper. Avoid printing on both sides of paper
when you are printing more than 1 copy.
4. Special Features
238
Printing features
14
Linux printing
Some features may not be available depending on models or options. It
means that the features are not supported.
7
8
Change other printing options in each tab, if necessary.
Click Print.
Automatic duplex printing may not be available depending on models. You
can alternatively use the lpr printing system or other applications for oddeven printing (see "Features by model" on page 7).
Printing from applications
Printing files
There are a lot of Linux applications that allow you to print using Common UNIX
Printing System (CUPS). You can print on your machine from any such
application.
1
2
Open the document to print.
CUPS directly from the command line interface. The CUPS lp or lpr utility allows
you to do that. You can print these files by using below command format.
"lp -d <printer name> -o <option> <file name>"
Open the File menu and click Page Setup (Print Setup for some
applications).
3
You can print text, image, pdf files on your machine using the standard
Please refer to lp or lpr man page on your system for more details.
Choose your paper size, orientation, and make
sure that your machine is selected. Click Apply.
4
5
6
Open the File menu and click Print.
Select your machine to print.
Choose the number of copies and indicate which pages to print.
4. Special Features
239
Printing features
Configuring Printer Properties
4
Click OK to apply the changes and close the Printer Properties window.
Using the Printer Properties window provided by the Printers configuration,
you can change the various properties for your machine as a printer.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2
3
Select your machine on the available printers list and click Properties.
The Printer Properties window appears.
The following five tabs display at the top of the window:
•
General: Allows you to change the printer location and name. The
name entered in this tab displays on the printer list in Printers
configuration.
•
Connection: Allows you to view or select another port. If you change
the machine port from USB to parallel or vice versa while in use, you
must re-configure the machine port in this tab.
•
Driver: Allows you to view or select another machine driver. By
clicking Options, you can set the default device options.
•
Jobs: Shows the list of print jobs. Click Cancel job to cancel the
selected job and select the Show completed jobs check box to see
previous jobs on the job list.
•
Classes: Shows the class that your machine is in. Click Add to Class
to add your machine to a specific class or click Remove from Class
to remove the machine from the selected class.
4. Special Features
240
Scan features
•
TWAIN: TWAIN is one of the preset imaging applications. Scanning an
image launches the selected application, enabling you to control the
scanning process. This feature can be used via the local connection or the
network connection (see "Scanning from image editing program" on page
245).
•
Samsung Easy Document Creator: You can use this program to scan
images or documents (See "Using Samsung Easy Document Creator" on
page 270).
•
WIA: WIA stands for Windows Images Acquisition. To use this feature, your
computer must be connected directly with the machine via a USB cable (see
"Scanning using the WIA driver" on page 245).
•
USB Memory: You can scan a document and save the scanned image onto
a USB memory device.
• For basic scanning features, refer to the Basic Guide (see "Basic scanning"
on page 63).
• This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
• The maximum resolution that can be achieved depends upon various
factors, including computer speed, available disk space, memory, the
size of the image being scanned, and bit depth settings. Thus, depending
on your system and what you are scanning, you may not be able to scan
at certain resolutions, especially using enhanced dpi.
15
Basic scanning method
This feature may not be available depending on model or optional goods
(see "Variety feature" on page 10).
You can scan the originals with your machine via a USB cable or the network. The
following methodoloqies can be used for scanning your documents:
•
Scan to PC: Scan the originals from the control panel. Then, the scanned
data will be stored in the connected computers My Documents folder (see
"Basic Scanning" on page 63).
4. Special Features
241
Scan features
16
17
Setting the scan settings in the computer
Scanning from network connected machine
This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
1
Open Samsung Easy Printer Manager (see "Using Samsung Easy
Printer Manager" on page 267).
2
3
4
Select the appropriate machine from the Printer List.
5
Select Scan to PC Settings menu.
This feature is not available for the machine that does not support the
network interface (see "Rear view" on page 22).
Make sure the printer driver is installed on your computer using the software CD,
since the printer driver includes the scan program (see "Installing the driver
locally" on page 28).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
Select
Select the option you want.
•
Scan Activation: Determines whether or not scanning is enabled on
the device.
•
Basic tab: Contains settings related to general scan and device
settings.
•
Image tab: Contains settings related to image altering.
Press Save > OK.
(Scan) > Scan to PC > Network PC on the control panel.
If you see Not Available message, check the port connection.
3
Select your registered computer ID, and enter the Password if
necessary.
4. Special Features
242
Scan features
18
• ID is the same ID as the registered scan ID for Samsung Easy Printer
Manager >
Switch to advanced mode > Scan to PC Settings.
• Password is the 4 digit number registered password for Samsung Easy
Printer Manager >
Switch to advanced mode > Scan to PC
Settings.
4
5
Scanning to WSD
Scans the originals and saves the scanned data on a connected computer if the
computer supports the WSD (Web Service for Device) feature. To use the WSD
feature, you need to install the WSD printer driver on your computer. For
Windows 7, you can install the WSD driver by Control Panel > Devices and
Printers > Add a printer. Click Add a network printer from the wizard.
Select the option you want and press OK.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Features by model" on page 7).
Scanning begins.
• The WSD feature works only with Windows Vista® or later version that are
the WSD-compliant computer.
Scanned image is saved in computer’s C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
• The following installation steps are based on Windows 7 computer.
Installing a WSD Printer Driver
1
2
3
SelectStart > Control Panel > Devices and Printers > Add a printer.
Click Add a network, wireless or Bluetooth printer from the wizard.
In the printers list, select the one you want to use, and then click Next.
4. Special Features
243
Scan features
• The IP address for WSD printer is http://IP address/ws/ (example: http://
111.111.111.111/ws/).
• If no WSD printer is displayed in the list, click The printer that I want
isn't listed > Add a printer using a TCP/IP address or hostname and
select Web Services Device from Device type. Then enter the printer's
IP address.
4
Follow the instructions in the installation window.
Scanning using the WSD feature
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
3
Select
(Scan) > Scan to WSD on the control panel.
If you see Not Available message, check the port connection. Or check the
printer driver for WSD is correctly installed.
4
5
6
Select your computer name from WSD PC List.
Select the option you want and press OK.
Scanning begins.
4. Special Features
244
Scan features
19
20
Scanning from image editing program
You can scan and import documents in the image editing software such as
Adobe Photoshop, if the software is TWAIN-compliant. Follow the steps below
to scan with TWAIN-compliant software:
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
3
4
5
6
Open an application, such as Adobe Photoshop.
Scanning using the WIA driver
Your machine supports the Windows Image Acquisition (WIA) driver for
scanning images. WIA is one of the standard components provided by Microsoft
Windows 7 and works with digital cameras and scanners. Unlike the TWAIN
driver, the WIA driver allows you to scan and easily adjust images without using
additional software:
The WIA driver works only on Windows OS (not supported Windows 2000)
with a USB port.
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
3
Click Start > Control Panel > Hardware and Sound > Devices and
Printers.
4
5
Right-click on device driver icon in Printers and Faxes > Start Scan.
Click File > Import, and select the scanner device.
Set the scan options.
Scan and save your scanned image.
New Scan application appears.
4. Special Features
245
Scan features
6
7
Choose your scanning preferences and click Preview to see how your
preferences affect the picture.
Scan and save your scanned image.
4
5
6
Select the type of scanning or a favorites then click Start.
7
8
Select to Save to Location, Send to E-mail, or Send to SNS.
21
Scanning with Samsung Easy Document Creator
Samsung Easy Document Creator is an application to help users scan, compile,
and save documents in multiple formats, including .epub format.
Make adjustments to the image (Scan Settings and More Options).
Click Scan to scan a final image or Prescan to get another preview
image.
Click on Save (Saving a Scan), Send ( E-mailing a Scan), or Share
(Uploading).
• Availabe for Windows OS users only.
If there is room on the document glass, more than one item can be scanned
• Windows XP or higher and Internet Explorer 6.0 or higher is the minimum
requirement for Samsung Easy Document Creator.
at the same time. Use the
tool to make multiple selection areas.
• Samsung Easy Document Creator is installed automatically when you
install the machine software (see "Using Samsung Easy Document
Creator" on page 270).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
2
3
From the Start menu select Programs or All Programs.
Click Samsung Printers, and start Samsung Easy Document Creator.
Click Scan (
) from the home screen.
4. Special Features
246
Scan features
Scanning from network connected machine
22
Mac scanning
Network or wireless model only (see "Features by model" on page 7).
Scanning from USB connected machine
1
2
3
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
Start Applications and click Image Capture.
1
2
Make sure that your machine is connected to a network.
3
4
Start Applications and click Image Capture.
•
Select the option you want.
Scan and save your scanned image.
If scanning does not operate in Image Capture, update Mac OS to the latest
version.
According to OS, follow steps below.
•
If No Image Capture device connected message appears, disconnect the
USB cable and reconnect it. If the problem continues, refer to the Image
Capture’s help.
4
5
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
5
6
For 10.5
-
Click Devices > Browse Devices on Menu bar.
-
Make sure that Connected checkbox is checked beside your
machine in Bonjour Devices.
For 10.6-10.9, select your device below SHARED.
Set the scan options on this program.
Scan and save your scanned image.
4. Special Features
247
Scan features
• If scanning does not operate in Image Capture, update Mac OS to the
latest version.
4
Select the scanner on the list.
5
6
Click Properties.
7
From the Scanner Properties window, click Preview.
• For more information, refer to the Image Capture’s help.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• You can scan using Samsung Scan Assistant software. Open the
Applications folder > Samsung folder > Samsung Scan Assistant.
23
Linux scanning
Scanning
1
Make sure that the machine is connected to your computer and
powered on.
2
3
Double-click the Unified Driver Configurator on your desktop.
Click the
button to switch to Scanners Configuration.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
4. Special Features
248
Scan features
8
The document is scanned and the image preview appears in the
Preview Pane.
Editing an image with Image Manager
The Image Manager application provides you with menu commands and tools
to edit your scanned image.
9
10
11
Drag the pointer to set the image area to be scanned in the Preview
Pane.
Select the option you want.
Scan and save your scanned image.
For later use, you can save as your scan settings and add it to the Job Type
drop-down list.
4. Special Features
249
Fax features
25
• For basic faxing features, refer to the Basic Guide (see "Basic faxing" on
page 64).
Redialing the fax number
• This function is not supported for C46xW (see "Control panel overview"
on page 23).
1
2
Press
(Redial/Pause) button on the control panel.
Select the fax number you want.
Ten recently sent fax numbers with ten received Caller IDs are shown.
24
Automatic redialing
3
When the number you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number. The redial time depends on
the country's factory default setting.
When the display shows Retry Redial?, press
When an original is loaded in the document feeder, the machine
automatically begins to send.
If an original is placed on the scanner glass, select Yes to add another
page. Load another original and press OK. When you have finished,
select No when Another Page? appears.
(Start) button to redial the
26
number without waiting. To cancel the automatic redialing, press
(Cancel
or Stop/Clear).
To change the time interval between redials and the number of redial attempts.
1
Press
panel.
(fax) >
(Menu)> Fax Setup > Sending on the control
Confirming a transmission
When the last page of your original has been sent successfully, the machine
beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message appears
on the display. If you receive an error message, press
2
3
Select Redial Times or Redial Term you want.
(Cancel or Stop/Clear)
to clear the message and try to send the fax again.
Select the option you want.
4. Special Features
250
Fax features
4
5
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. Press
(fax) >
> Sending > Send Report on the control panel.
(Menu) > Fax Setup
Click Print or OK.
Enter the recipients’ numbers and select the option
Select the Help menu from the window and click on any option you want to
know about.
27
Sending a fax in the computer
6
Click Send.
28
• This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
You can send a fax from your computer without going to the machine.
To send a fax from your computer, the Samsung Network PC Fax program
must be installed. This program will be installed when you installed the printer
driver.
1
2
Open the document to be sent.
Select Print from the File menu.
The Print window will be displayed. It may look slightly different
depending on your application.
3
Select Samsung Network PC Fax from the Print window
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be
present. You cannot send a color fax using this feature.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
3
4
5
6
Press
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs.
Press
(Menu) > Fax Feature > Delay Send on the control panel.
Enter the number of the receiving fax machine and press OK.
The display asks you to enter another fax number to send the document.
4. Special Features
251
Fax features
7
To enter more fax numbers, press OK when Yes highlights and repeat
steps 5.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
• Once you entered a group dial number, you cannot enter another group
dial numbers anymore.
2
Press
panel.
Enter the job name and the time.
3
Select the fax job and press OK.
• You can add up to 10 destinations.
8
If you set a time earlier than the current time, the fax will be sent at that time
on the following day.
9
Adding documents to a reserved fax
The original is scanned into memory before transmission.
The machine returns to ready mode. The display reminds you that you
are in ready mode and that a delayed fax is set.
You can check the list of delayed fax jobs.
Press
(Menu) > System Setup > Report > Schedule Jobs on the
control panel.
(fax) >
(Menu) > Fax Feature > Add Page on the control
When you have finished, select No when Another Page? appears. The
machine scans the original into memory.
4
Press
(Cancel or Stop/Clear) to return to ready mode.
Canceling a reserved fax job
1
Press
panel.
(fax) >
(Menu) > Fax Feature > Cancel Job on the control
2
3
Select the fax job you want and press OK.
Press OK when Yes highlights.
The selected fax is deleted from memory.
4
Press
(Stop/Clear) to return to ready mode.
4. Special Features
252
Fax features
29
30
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of reserved
operations. The original is scanned into memory and immediately transmitted
when the current operation is finished.
Forwarding a sent fax to another destination
You can set the machine to forward the received or sent fax to other destination
by a fax. If you are out of office but have to receive the fax, this feature may be
useful.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
Press
(Fax) >
control panel.
2
Press
(fax) >
(Menu) > Fax Feature > Send Forward > Forward
to Fax > On on the control panel.
3
4
5
Enter the destination fax number and press OK.
(Menu) > Fax Feature > Priority Send on the
Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
Enter the job name and press OK.
If an original is placed on the scanner glass, select Yes to add another
pages. Load another original and press OK.
3
Enter the destination fax number, email address, or server address and
press OK.
4
Press
When you have finished, select No when Another Page? appears.
The machine starts to scan and send a fax to destinations.
(Cancel or Stop/Clear) to return to ready mode.
Subsequent sent faxes will be forwarded to the specified fax machine.
4. Special Features
253
Fax features
31
32
Forwarding a received fax
Receiving a fax in the computer
You can set the machine to forward the received or sent fax to other destination
• This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
by a fax. If you are out of office but have to receive the fax, this feature may be
useful.
• To use this feature, set the option on the control panel:
1
Press
(fax) >
(Menu) > Fax Feature > Receive Forward or Rcv.
Forward >Forward to Fax or Forward to PC > Forward on the control
panel.
• Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
• To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
2
Enter the destination fax number, email address, or server address and
press OK.
3
4
Enter the starting tim and ending time, then press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
Press
(fax) >
(Menu) > Fax Feature > Rcv. Forward > Forward
to PC > Forward the control panel.
1
2
3
4
Open the Samsung Easy Printer Manager.
Select the appropriate machine from the Printer List.
Select Fax to PC Settings menu.
Use Enable Fax Receiving from Device to change the fax settings.
•
Image Type: Convert the received faxes to PDF or TIFF.
•
Save Location: Select location to save the converted faxes.
•
Prefix: Select prefix.
•
Print received fax: Set to print information for the received fax after
receiving the fax.
•
Notify me when complete: Set to show the popup window to
notify receiving a fax.
Subsequent sent faxes will be forwarded to the specified fax machine.
4. Special Features
254
Fax features
•
•
Open with default application: After receiving the fax, open it with
default application.
To use the Ans/Fax mode, attach an answering machine to the EXT socket
on the back of your machine.
None: After receiving a fax, the machine does not notify the user or
opens the application.
•
5
Press Save > OK.
33
Changing the receive modes
1
Press
(fax) >
(Menu) > Fax Setup > Receiving > Receive Mode
on the control panel.
2
Select the option you want.
•
Fax: Answers an incoming fax call and immediately goes into the fax
reception mode.
•
Tel: Receives a fax by pressing
DRPD: You can receive a call using the Distinctive Ring Pattern
Detection (DRPD) feature. Distinctive Ring is a telephone company
service which enables an user to use a single telephone line to
answer several different telephone numbers. For further details, see
"Receiving faxes using DRPD mode" on page 256.
This setting may not be available depending on your country.
3
4
Press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
34
(On Hook Dial) and then
(Start) button.
•
Ans/Fax: Is for when an answering machine is attached to your
machine. Your machine answers an incoming call, and the caller can
leave a message on the answering machine. If the fax machine
senses a fax tone on the line, the machine automatically switches to
Fax mode to receive the fax.
Receiving manually in Tel mode
You can receive a fax call by pressing
pressing
(On Hook Dial) button and then
(Start) when you hear a fax tone.
4. Special Features
255
Fax features
35
36
Receiving in Answering Machine/Fax mode
To use this mode, you must attach an answering machine to the EXT socket on
the back of your machine. If the caller leaves a message, the answering machine
stores the message. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
• If you have set your machine to this mode and your answering machine
is switched off, or no answering machine is connected to EXT socket,
your machine automatically goes into Fax mode after a predefined
number of rings.
Receiving faxes with an extension telephone
When you are using an extension telephone connected to the EXT socket, you
can receive a fax from someone you are talking to on the extension telephone,
without going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press the
keys *9* on the extension phone. The machine receives the fax.
*9* is the remote receive code preset at the factory. The first and the last
asterisks are fixed, but you can change the middle number to whatever you
want.
• If the answering machine has a user-selectable ring counter, set the
machine to answer incoming calls within 1 ring.
While you are talking over the telephone connected to the EXT socket, copy
and scan features are not available.
• If the machine is in Tel mode, disconnect or switch off the answering
machine with the fax machine. Otherwise, the outgoing message from
the answering machine will interrupt your phone conversation.
37
Receiving faxes using DRPD mode
This setting may not be available depending on your country. Distinctive Ring is
a telephone company service which enables an user to use a single telephone
line to answer several different telephone numbers. This feature is often used by
answering services who answer telephones for many different clients and need
to know which number someone is calling in on to properly answer the phone.
4. Special Features
256
Fax features
38
This setting may not be available depending on your country.
1
Select
(fax) >
(Menu) > Fax Setup > Receiving > DRPD Mode
> Waiting Ring on the control panel.
2
3
Call your fax number from another telephone.
When your machine begins to ring, do not answer the call. The machine
requires several rings to learn the pattern.
Receiving in secure receiving mode
This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
You may need to prevent your received faxes from being accessed by
unauthorized people. Turn on secure receiving mode, then all incoming faxes
go into memory. You can print the incoming faxes by entering the password.
When the machine completes learning, the display shows Completed
DRPD Setup. If the DRPD setup fails, Error DRPD Ring appears.
4
To use the secure receiving mode, activate the menu from
(fax) >
(Menu) > Fax Feature > Secure Receive on the control panel.
Press OK when DRPD appears and start over from step 2.
• DRPD must be set up again if you re-assign your fax number, or connect
the machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT socket.
Printing received faxes
1
Select
(fax) >
(Menu) > Fax Feature > Secure Receive > Print
on the control panel.
2
3
Enter a four-digit password and press OK.
The machine prints all of the faxes stored in memory.
4. Special Features
257
Fax features
39
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you are
making copies or printing. If you receive a fax while you are copying or printing,
your machine stores incoming faxes in its memory. Then, as soon as you finish
copying or printing, the machine automatically prints the fax.
If fax is received and being printed, other copy and print jobs cannot be
processed at the same time.
40
Printing sent fax report automatically
You can set the machine to print a report with detailed information about the
previous 50 communication operations, including time and dates.
1
Press
(fax) >
control panel.
2
Press
(Menu) > Fax Setup > Auto Report > On on the
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
258
5. Useful Management
Tools
This chapter introduces management tools provided to help you make full use of your machine.
• Easy Capture Manager
260
• Samsung Easy Color Manager
261
• Samsung AnyWeb Print
262
• Easy Eco Driver
263
• Using SyncThru™ Web Service
264
• Using Samsung Easy Printer Manager
267
• Using Samsung Easy Document Creator
270
• Using Samsung Printer Status
271
• Using the Linux Unified Driver Configurator
273
Easy Capture Manager
• This feature may not be available depending on model or optional goods (see "Software" on page 8).
• Available for Windows OS users only (see "Software" on page 8).
Capture your screen and launch Easy Capture Manager by simply pressing the Print Screen key on the keyboard.