Samsung N102 SP Netbook User Manual (Windows 7)

User Guide
1
Getting Started
2
Using the Computer
3
Settings and Upgrade
4
Backup/Restoration
5
Appendix
Contents
Start
Contents
Chapter 1. Getting Started
3
4
7
22
25
31
Tips
Before You Start
Safety Precautions
Proper Posture During Computer Use
Overview
Turning the Computer On and Off
Chapter 2. Using the Computer
34
37
43
45
48
50
51
52
55
Keyboard
Touchpad
External-type CD drive (ODD, To be purchased)
Multi Card Slot (Optional)
Connecting an External Display Device (Optional)
Connecting an External Digital Device
Adjusting the Volume
Wired Network
Wireless Network (Optional)
Chapter 3. Settings and Upgrade
59
LCD Brightness Control
Chapter 1
Getting Started
61
62
64
67
68
70
75
Integrated configuration program
(Easy Settings, Optional)
BIOS Setup
Setting a Boot Password
Changing the Boot Priority
Upgrading Memory
Battery
Using the Security Slot
Chapter 4. Backup/Restore
77
Samsung Recovery Solution (Optional)
Chapter 5. Appendix
90
92
94
109
110
111
113
117
Important Safety Information
Replacement Parts and Accessories
Regulatory Compliance Statements
WEEE Symbol Information
TCO Certified
Product Specifications
Glossary
Index
1
Chapter 1.
Getting Started
Tips
3
Before You Start
4
Safety Precautions
7
Proper Posture During Computer Use
22
Overview
25
Turning the Computer On and Off
31
Tips
Q
A
Tip
The computer is not turning on or does not respond
and displays a blank screen.
Restore the computer using Samsung Recovery Solution.
1. Turn the computer on and press the F4 key when the
booting screen (SAMSUNG logo) appears.
2. The computer will boot up in restore mode after a short
while and Samsung Recovery Solution appears.
3. When the start menu screen appears, click Restore.
Chapter
Chapter1.
1
Getting Started
Q
A
Q
A
Q
A
Q
A
The keyboard Fn keys (shortcut keys) do not work.
Install the Easy Settings (optional) program.
3
I want to connect an external monitor, TV or projector.
Connect the display device and the computer with the
monitor and repeatedly press the F4 key while holding
down the Fn key.
How can I extend the battery usage time?
The battery usage time may be shortened if you recharge
the battery before it is completely discharged.
To resolve this problem, enter the BIOS Setup and select
Smart Battery Calibration to discharge the battery
completely and then recharge the battery.
I want to restore the computer to the state when it was
purchased.
If you use the Samsung Recovery Solution function, you
can easily and quickly restore the computer to a previous
state even if you do not have a separate OS recovery DVD
or recovery CD.
For detailed information on a function, refer to
the corresponding section of the User Manual.
Before You Start
Before reading the User Guide, first check the following
information.
• Optional items, some devices and software referred to in
the User Guide may not be provided and/or changed by
upgrade.
Note that the computer environment referred in the User
Guide may not be the same as your own environment.
• The pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series and may differ from the actual appearance of the
product.
• This guide decribes procedures for using both the mouse
and the touchpad.
• This manual has been written for the Windows operating
system. The descriptions and figures may differ depending
on the installed operating system.
• The User guide supplied with this computer may vary
depending on your model.
Using the software
• The software described in the main text can be launched
using the following menu path.
- Start > All Programs
- Start > All Programs > Samsung
• When the programs are not installed, select Samsung
Recovery Solution > System Software to install the
programs. (Only for models supplied with Samsung
Recovery Solution)
Chapter 1
Getting Started
4
Safety Precaution Notations
Icon
Notation
Description
Warning
Failing to follow instructions marked with
this symbol, may cause personal injury
and or fatality.
Caution
Failing to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
Text Notations
Icon
Notation
Description
Caution
Content included in this section includes
information required about the function.
Note
Content included in this section includes
helpful information to use the function.
Before You Start
Copyright
© 2012 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your data
to prevent any such data loss.
Chapter 1
Getting Started
5
Precautions for Operating System Support
If a problem occurs because of the reinstallation of other
operating systems(OS) or a previous version of a OS pre-installed
on this computer, or a software that does not support the OS, the
company will not provide technical support, a replacement or
refund, and if our service engineer visits you due to this problem,
a service charge will be applied.
Performance Restrictions
1 Online games and some games(3D,2D) may not be supported
and Full HD video and some high bit rate HD video playback
may be slow and stutter on this computer.
2 There is one memory slot provided on this computer. It
supports 2GB memory max. To upgrade to 2GB memory,
replace the current memory with a 2GB memory module.
Before You Start
About the Product Capacity Representation
Standard
About the capacity representation of the storage
The capacity of the storage device (HDD, SSD) of the manufacturer
is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage
device capacity assuming that 1KB=1,024 Bytes, and therefore the
capacity representation of the HDD in Windows is smaller than the
actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB,
80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB)
In addition, the capacity representation in Windows may be even
smaller because some programs such as Recovery Solution may
reside in a hidden area of the HDD.
Chapter 1
Getting Started
6
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual
capacity of memory.
This is because BIOS or a video adapter uses a portion of memory
or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report
the capacity as 1,022MB or less)
For more information, refer to the Samsung Recovery Solution
section.
Safety Precautions
For your security and to prevent damage, please read the
following safety instructions carefully.
Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Installation Related
Do not install the product in places exposed
to humidity such as a bathrooms.
There is a danger of electric shock. Use the
product within the operating conditions
specified in the Manufacturers User Guide.
Keep the plastic bags out of the reach of
children.
There is a danger of suffocation.
Chapter 1
Getting Started
7
Keep a distance of 15cm or more between
the computer and the wall and do not place
any objects between them.
This may increase the internal temperature of
the computer and may cause an injury.
Do not install the computer on a slant or a
place prone to vibrations, or avoid using the
computer in that location for a long time.
This increases the risk that a malfunction or
damage to the product will occur.
Avoid exposing any part of your body to the
heat from the computer vent or AC adapter
for a long time when the computer is on.
Exposing a part of your body close to the heat
from the vent or AC adapter for long periods of
time may cause a burn.
Avoid blocking the vent at the bottom or
side of the computer when using it on a bed
or cushion.
If the vent is blocked, there is a danger of
damaging the computer or overheating the
inside of the computer.
Ver 2.9
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Power Related
The power plug and wall outlet figures may differ
depending on the country specifications and the product
model.
Do not touch the main plug or power cord
with wet hands.
There is a danger of electric shock.
Do not exceed the standard capacity
(voltage/current) of a multiplug or power
outlet extension when using it for the
product.
There is a danger of electric shock or fire
hazard.
Chapter 1
Getting Started
8
If the power cord or power outlet makes a
noise, disconnect the power cord from the
wall outlet and contact a service center.
There is a danger of electric shock or fire
hazard.
Do not use a damaged or loose main plug or
power cord or power outlet.
There is a danger of electric shock or fire
hazard.
Plug the power cord firmly into the power
outlet and AC adapter.
Failure to do so may cause fire hazard.
Do not unplug the power cord by pulling
the cable only.
If the cord is damaged, it may cause electric
shock.
Do not bend the power cord excessively or
do not place a heavy object over the power
cord. It is especially important to keep the
power cord out of reach of infants and pets.
If the cord is damaged, it may cause electric
shock or fire.
Safety Precautions
Warning
Chapter 1
Getting Started
9
AC Adapter Usage Precautions
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Connect the power cord to an outlet or
multiple power plug (extended cable) with
a ground terminal.
Failure to do so may result in electric shock.
If water or another substance enters
the power input jack, AC adapter or the
computer, disconnect the power cord and
contact the service center.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Damage to the device within the computer
may cause electric shock or fire hazard.
Keep the power cord or outlet clean so that
they are not covered with dust.
Failure to do so may result in fire.
Connect the power cord to the AC adapter
firmly.
Otherwise, there is a danger of fire due to an
incomplete contact.
Use only the AC adapter supplied with the
product.
Using another adapter may cause the screen to
flicker.
Do not place heavy objects or step onto
the power cord or AC adapter to avoid
damaging the power cord or AC adapter.
If the cord is damaged, there is a danger of
electric shock or fire.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Battery Usage Related
Please charge the battery fully before using the
computer for the first time.
Keep the battery out of the reach of infants
and pets, as they could put the battery into
their mouths.
There is a danger of electric shock or choking.
Use an authorized battery and AC adapter
only.
Please use an authorized battery and adapter
approved by Samsung Electronics.
Unauthorized batteries and adapters may not
meet the proper safety requirements and may
cause problems or malfunctions and result in
an explosion or fire.
Chapter 1
Getting Started
10
Do not use the computer in a badly
ventilated location such as on bedding, on a
pillow or cushion, etc, and do not use it in a
location such as room with floor heating as
it may cause the computer to overheat.
Take care that the computer vents (on the side
or the bottom) are not blocked especially in
these environments. If the vents are blocked,
the computer may overheat and it may cause a
computer problem, or even an explosion.
Do not use the computer in a humid
location such as a bathroom or sauna.
Please use the computer within the
recommended temperature and humidity
range (10~3ºC, 20~80% RH).
Do not close the LCD panel and put the
computer into your bag to move it when it
is still turned on.
If you put the computer into your bag without
turning it off, the computer may overheat and
there is a danger of fire. Shut the computer
down properly before moving it.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Chapter 1
Getting Started
11
Cutting the power to the internal battery
(for corresponding models only.)
Never heat the product(or battery) or put
the product(or battery) into a fire. Do not
put or use the product(or battery) in a hot
location such as a sauna, inside a vehicle
exposed to the heat, and so on.
There is a danger of an explosion or fire.
Take care not to allow metal objects such as
a key or clip to touch the battery terminal
(metal parts).
If a metal object touches the battery terminals,
it may cause excessive current flow and it may
damage the battery, or result in a fire.
If liquid leaks out of the product(or battery)
or there is a funny smell coming from
the product(or battery), remove the the
product(or battery) the computer and
contact a service center.
There is a danger of an explosion or fire.
To use the computer safely, replace a dead
battery with a new, authorized battery.
•• For products with built-in batteries, customers cannot remove
the battery.
•• In the case of flooding, lightning or explosions, you can cut
the battery power by inserting an object such as a paper clip
into the [Emergency Hole] at the bottom of the computer.
•• Disconnect the AC adapter and insert an object such as a
paper clip into the hole at the bottom of the computer to cut
the battery power.
In the case of flooding, lightning or explosions, cut
the battery power, do not reconnect the AC adapter,
and immediately contact Samsung Electronics so that
the appropriate countermeasures can be taken.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
• Thereafter, if you connect the AC adapter, the battery power
will be supplied again.
• Do not cut the battery power under normal
conditions.
• This may result in data loss or a product
malfunction.
The location of the Emergency Hole may differ depending
on the model.
Chapter 1
Getting Started
12
Usage Related
Disconnect all cables connected to the
computer before cleaning it. If your
notebook is external & removable battery
type, remove the external battery.
There is a danger of electric shock or damage
to the product.
Do not connect a phone line connected to a
digital phone to the modem.
There is a danger of a electric shock, fire or
damage to the product.
Do not place any container filled with water or
chemicals over or near the computer.
If water or chemicals enter the computer, this
may cause fire or electric shock.
Safety Precautions
Warning
Chapter 1
Getting Started
Upgrade Related
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
If the computer is broken or dropped,
disconnect the power cord and contact a
service center for a safety check.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Using a broken computer may cause electric
shock or fire hazard.
Avoid direct sunlight when the computer
is in an air-tight location such as inside a
vehicle.
There is a danger of a fire hazard. The computer
may overheat and also present opportunity to
thieves.
Do not use your notebook PC for long
periods of time while any part of your
body is making direct contact with it. The
temperature of the product may increase
during normal operation.
This may result in harming or burning your skin.
Never disassemble the power supply or AC
adapter.
There is a danger of electric shock.
When removing the RTC (Real Time Clock)
battery, keep it out of the reach of children
as they could touch and/or swallow it.
There is a danger of choking. If a child has
swallowed it, contact a doctor immediately.
Use only authorized parts (multiplug, battery and memory) and never
disassemble parts.
There is a danger of damaging the product,
electric shock or fire hazard.
Before disassembling the computer,
shut down the computer and disconnect
all cables on the flat place. If there is a
modem, disconnect the phone line. If your
notebook is external & removable battery
type, remove the external battery.
Failure to do so, may cause electric shock.
13
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Security and Movement Related
Follow the instructions for the relevant
location (e.g. airplane, hospital, etc.) when
using a wireless communication device
(wireless LAN, Bluetooth, etc.).
Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields include airport walk-through devices and security wands.
The airport security devices that check carry-on luggage, such as conveyor belts, use
x-rays instead of magnetism and will not
damage a drive.
Chapter 1
Getting Started
When carrying the notebook computer
with other items, such as the adapter,
mouse, books etc, take care not to press
anything against the notebook computer.
If a heavy object is pressed against the
notebook computer, a white spot or stain may
appear on the LCD. Therefore, take care not to
apply any pressure to the notebook.
In this case, place the notebook computer in
a separate compartment away from the other
objects.
14
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Chapter 1
Getting Started
15
Battery Usage Related
Dispose of worn-out batteries properly.
•• There is a danger of fire or explosion.
Installation Related
Do not block the ports (holes), vents, etc. of the product and
do not insert objects.
Damage to a component within the computer may cause electric
shock or fire.
When using the computer with it lying on its side, place it so
that the vents face upwards.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
Do not place a heavy object over the product.
This may cause a problem with the computer. In addition, the
object may fall and cause injury, or damage the computer.
•• The battery disposal method may differ depending on
your country and region. Dispose of the used battery in an
appropriate way.
Do not throw or disassemble the battery and do not put it
into water.
This may cause an injury, fire or explosion.
Use only a battery authorized by Samsung Electronics.
Failure to do so may cause an explosion.
Avoid contact with metal objects such as car keys or clips
when keeping or carrying a battery.
Contact with a metal may cause excessive current and a high
temperature and may damage the battery or cause a fire.
Charge the battery according to the instructions in the manual.
Failure to do so, may cause an explosion or fire from damage to
the product.
Do not heat the product(or battery) or expose it to heat (e.g.
inside a vehicle during the summer).
There is a danger of explosion or fire.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Usage Related
Do not place a candle, light cigar, etc. over or on the product.
There is a danger of fire.
Use a wall outlet or multi-plug with a grounding part.
Chapter 1
Getting Started
16
Connect only permitted devices to the connectors or ports
of the computer.
Failure to do so, may cause electric shock and fire.
Close the LCD panel only after checking if the notebook
computer is turned off.
The temperature may rise and it may cause overheating and
deformation of the product.
Do not press the Eject Button while the Floppy Disk/CD-ROM
drive is in operation.
Failure to do so may cause electric shock hazard.
You might lose data and the disk might be suddenly ejected and
could cause an injury.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Take care not to drop the product while using it.
Authorized Samsung Repair Centers will carry out safety checks
after a repair. Using a repaired product without testing it for
safety may cause an electric shock or fire.
This may cause personal injury or loss of data.
Do not touch the antenna with electricity facility such as the
power outlet.
In case of lightning, immediately turn the system off,
disconnect the power cord from the wall outlet and phone
line from modem. Do not use a modem or phone.
There is a danger of electric shock.
There is a danger of electric shock or fire.
Failure to do so, may cause damage to the product.
Do not use your computer and AC-Adapter on your lap or
soft surfaces.
If the computer temperature increases, there is a danger of
burning yourself.
When handling computer parts, follow the instructions on
the manual supplied with the parts.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Chapter 1
Getting Started
17
Do not place your face close to the Optical Disk Drive tray
when it is operating.
There is a danger of injury due to an abrupt ejection.
Check CDs for cracks and damage prior to use.
If the computer emits smoke, or there is a burning smell,
disconnect the power plug from the wall outlet and contact
a service center immediately. If your notebook is external &
removable battery type, remove the external battery.
There is a danger of fire.
Do not use a damaged or modified CD/Floppy Disk.
There is a danger of damaging the product or personal injury.
Do not insert your fingers into the PC Card Slot.
There is a danger of injury or electric shock.
Use recommended computer cleansing solution when
cleaning the product and only use the computer when it is
completely dried.
Failure to do so may cause electric shock or fire.
Emergency disk eject method using paperclip should not
be used while the disk is in motion. Make sure to use the
emergency disk eject method only when the Optical Disk
Drive has stopped.
There is a danger of injury.
It may damage the disc and cause disorder of device and injury of
user.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Upgrade Related
Take care when touching the product or parts.
The device may be damaged or you may be injured.
Take care not to throw or drop a computer part or device.
Chapter 1
Getting Started
Security and Movement Related
When moving the product, turn the power off and separate
all connected cables first.
The product might be damaged or users may trip over the cables.
For long periods of not using the notebook computer,
discharge the battery and preserve as it is detached.
(For external & removable battery type)
The battery will be preserved at its best condition.
This may cause injury or damage to the product.
Do not operate or watch the computer while driving a
vehicle.
Make sure to close the computer cover before connecting
the power after a reassembly.
There is a danger of a traffic accident. Please concentrate on
driving.
There is a danger of electric shock if your body touches an
internal part.
Use parts authorized by Samsung Electronics only.
Failure to do so, may cause fire or damage the product.
Never disassemble or repair the product by yourself.
There is a danger of electric shock or fire.
To connect a device that is not manufactured or authorized
by Samsung Electronics, enquire at your service center
before connecting the device.
There is a danger of damaging the product.
18
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Cautions on Preventing Data Loss
(Hard Disk Management)
Take care not to damage the data on a hard disk drive.
•• A hard disk drive is so sensitive to external impact that an
external impact may cause loss of data on the surface of the
disk.
•• Take extra care, because moving the computer or an impact
on the computer when it is turned on may damage the data of
the hard disk drive.
•• The company is not liable for any loss of data on the hard disk
drive.
Chapter 1
Getting Started
19
Causes that may damage the data of a hard disk drive and
the hard disk drive itself.
•• The data may be lost when an external impact is applied to the
disk while disassembling or assembling the computer.
•• The data may be lost when the computer is turned off or reset
by a power failure while the hard disk drive is operating.
•• The data may be lost and irrecoverable due to a computer virus
infection.
•• The data may be lost if the power is turned off while running a
program.
•• Sudden impact or movement to the computer while the hard
disk drive is operating, may cause files to be corrupted or bad
sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive,
please backup your data frequently.
Safety Precautions
Using the power supply in an airplane
Since the power outlet type differs depending on the type of
airplane, connect the power appropriately.
Since the representative figures of the power plug and
the auto adapter are used, they may differ from the actual
parts.
Chapter 1
Getting Started
20
When using the AC power plug
Connect the power plug pins perpendicular into the center of the
power outlet.
• If the plug pins are not inserted into the center of the holes, the
plug pins are only inserted up to half their length. In this case,
reconnect the power plug.
• You have to insert the power plug into the outlet when the
power indicator (LED) of the power outlet is lit green. If the
power is connected properly, the power indicator (LED)
remains green.
Otherwise, the power indicator (LED) is turned off. In this case,
unplug the power, check if the power indicator (LED) is green,
and then reconnect the power plug.
Power Indicator (LED)
Center
Holes
220V Power Plug
110V Power Plug
Good Example
Wrong Example
Safety Precautions
Chapter 1
Getting Started
When using the auto adapter
When the cigar socket is provided, you have to use the auto
adapter (optional). Insert the cigar plug of the auto adapter into
the cigar socket and connect the DC plug of the auto adapter to
the power input port of the computer.
Auto Adapter
DC Plug
Cigar Plug
In-flight Cigar Socket
When using the Airplane Charging Converter
Depending on the airplane, you have to use the auto adapter
and charging converter. Connect the airplane charging converter
(optional) to the auto adapter (optional) and then insert the
airplane power input jack into the power outlet.
Charging
Converter
Connect the airplane power
input jack to the power
outlet of the airplane.
this end to
1 Connect
the auto adapter.
2
21
Proper Posture During Computer Use
Chapter 1
Getting Started
22
Maintaining a proper posture during computer use is very
important to prevent physical harm.
•
Do not use the computer while you are lying down, but only
while you are sitting down.
The following instructions are about maintaining a proper posture
during computer use developed through human engineering.
Please read and follow them carefully when using the computer.
•
Do not use the computer on your lap. If the computer
temperature increases, there is a danger of burning yourself.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from
repeated operations may increase and serious physical harm may
be caused.
•
Work while keeping your waist straight.
•
Use a chair with a comfortable back.
•
Keep the center of your leg weight not on the chair but on
your feet when you are sitting on a chair.
•
To use the computer while talking over the telephone, use a
headset. Using the computer with the phone on your shoulder
is bad for posture.
•
Keep frequently used items within a comfortable work range
(where you can reach them with your hands).
• The instructions in this manual have been prepared so that
they can be applied within the coverage of general users.
• If the user is not included in the coverage, the
recommendation is to be applied according to the user’s
needs.
Proper Posture
Adjust the heights of desks and chairs appropriate to your
height.
The heights are to be adjusted so that your arm forms a right
angle when you place your hand over the keyboard while sitting
down on a chair.
Adjust the height of chair so that your heel is comfortably placed
on the floor.
Proper Posture During Computer Use
Chapter 1
Getting Started
Eye Position
Hand Position
Keep the monitor or LCD away from your eyes by at least
50cm.
Keep your arm at a right angle as shown by the figure.
•
Adjust the height of the monitor and the LCD screen so that its
top height is equal to or lower than your eyes.
•
Avoid setting the monitor and LCD excessively bright.
•
Keep the monitor and LCD screen clean.
•
If you wear glasses, clean them before using the computer.
•
When entering contents printed on a paper into the computer,
use a static paper holder so that the height of the paper is
almost equal to that of the monitor.
23
•
Keep the line from your elbow to your hand straight.
•
Do not place your palm over the keyboard while typing.
•
Do not hold the mouse with excessive force.
•
Do not press the keyboard, touchpad or mouse with excessive
force.
•
It is recommended connecting an external keyboard and
mouse when using the computer for long periods of time.
Proper Posture During Computer Use
Chapter 1
Getting Started
Volume Control (Headphones and Speakers)
Use Time (Break Time)
Check your volume first to listen to music.
•
24
Take a break for 10 minutes or more after a 50-minute period
when working for more than one hour.
Illumination
Check your
volume!
•
Check if the volume is too loud before using headphones.
•
It is not recommended using headphones for long periods of
time.
•
Any deviation from the equalizer default setting could cause
hearing impairment.
•
The default setting can be changed through software and
driver updates without your intervention. Please check the
equalizer default setting before first usage.
•
Do not use the computer in dark locations. The illumination
level for computer use must be as bright so for reading a book.
•
Indirect illumination is recommended. Use a curtain to prevent
reflection on the LCD screen.
Operation Condition
•
Do not use the computer in hot and humid locations.
•
Use the computer within the allowed temperature and
humidity range specified in the User Guide.
Overview
Chapter 1
Getting Started
Front View
• The pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series. Therefore the colors and appearance of the pictures
may differ from the actual appearance of the product
depending on the model.
• The actual color and appearance of the computer may
differ from the pictures used in this guide.
1
1 Camera
Using this camera, you can take still
pictures and record video.
2 LCD
The screen images are displayed here.
3 Keyboard
A device to enter data by pressing the
keys.
Touchpad/
4
Touchpad Buttons
The touchpad and touchpad buttons
provide functions similar to the mouse
ball and buttons.
5
Multi Card Slot
2
Shows the operating status of the
computer.
6 Status Indicators
3
4
6
5
A card slot supports multi cards.
The corresponding operating LED is
lit when the corresponding function
operates.
25
Overview
Chapter 1
Getting Started
26
Status Indicators
1 Caps Lock
This turns on when the Caps Lock key is
pressed allowing capital letters to be typed
without holding the Shift button down.
On: Upper-case alphabetic input
Off: Lower-case alphabetic input
This shows the power source and the
battery charge status.
Green: When the battery is fully
charged or the battery is not installed.
2 Charge Status
1
2
/
Red or orange: When the battery is
being charged.
Off: When the computer is running on
battery power without being connected
to AC adapter.
3
This shows the computer operating status.
3 Power
On: When the computer is operating.
Blinks: When the computer is in Sleep
mode.
Overview
Chapter 1
Getting Started
Right View
Either type A or B is provided depending on the model.
► Type B Model
► Type A Model
1
1
2
3
2
3
4
1 Power Switch
Turns the computer on or off.
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
2 USB Port
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
2 Power Switch
Turns the computer on or off.
3 Monitor Port
3 Security Slot
You can secure the computer by
connecting a lock and cable to the
Security Slot.
A port used to connect a monitor, TV
or projector supporting a 15pin D-SUB
interface.
4 Security Slot
You can secure the computer by
connecting a lock and cable to the
Security Slot.
1 USB Port
27
Overview
Chapter 1
Getting Started
28
Left View
1 DC Jack
A jack to connect the AC adapter that
supplies power to the computer.
2 Wired LAN Port
Connect the Ethernet cable to this
port.
The internal heat of the computer is
emitted through these holes.
3 Fan Vents
1
2
3
4
4
If the vents are blocked the
computer may overheat.
Avoid blocking the vents as this
may be dangerous.
Ear-set / headset Jack This is the jack for connecting an earset or headset.
Overview
Chapter 1
Getting Started
29
Bottom View
Either type A or B is provided depending on the model.
► Type A Model
1
1 Battery
The battery supplies power to the
computer.
2 Battery Latches
The latch used to remove or install the
battery.
Memory
Compartment Cover/
3
Hard Disk Drive
Compartment Cover
The main memory and hard disk drive
is installed inside the cover.
2
3
The internal heat of the computer is
emitted through these holes.
4 Fan Vents
4
5
If the vents are blocked the
computer may overheat. Avoid
blocking the vents as this may be
dangerous.
A device used to generate sound.
5 Mono Speaker
Since this computer has a single
built-in mono speaker, the Balance
bar in the Speaker Volume Mixer
does not work.
Overview
Chapter 1
Getting Started
30
Bottom View
Either type A or B is provided depending on the model.
► Type B Model
1 Battery
The battery supplies power to the
computer.
2 Battery Latches
The latch used to remove or install the
battery.
3
Memory
Compartment Cover
1
The internal heat of the computer is
emitted through these holes.
2
4 Fan Vents
5
If the vents are blocked the
computer may overheat. Avoid
blocking the vents as this may be
dangerous.
A device used to generate sound.
3
4
The main memory is installed inside
the cover.
5 Mono Speaker
Since this computer has a single
built-in mono speaker, the Balance
bar in the Speaker Volume Mixer
does not work.
Turning the Computer On and Off
Turning the computer on
1 Install the battery and connect the AC adapter.
2 Lift the LCD panel up.
3 Slide the Power Switch to turn the computer on.
Chapter 1
Getting Started
31
About Windows Activation
When you turn the computer on for the first time, the Windows
activation screen appears.
Follow the activation procedures according to the instructions on
the screen to use the computer.
Entering Sleep mode
When the computer is turned on, press the computer’s power
button once briefly.
Adjusting the screen brightness
When the computer runs on battery power, the LCD brightness is
automatically set to low.
Press the
brightness.
+
key combination to increase the screen
Turning the Computer On and Off
Turning the computer off
• Save all your data before clicking on Shut down.
• If Easy Settings is installed, the system shutdown location
may differ.
> Shut down mode
1
32
If the computer cannot be shut down due to a system error,
press and hold the power button for at least 4 seconds to
shut it down by force.
• Since the procedures to turn the computer off may differ
depending on the installed operating system, please turn
the computer off according to the procedures for the
purchased operating system.
Click Start
computer.
Chapter 1
Getting Started
to shutdown the
2
Please note that the system diagnosis program may run when
you turn the computer on after shutting the computer down
by force by holding the power button down.
Chapter 2.
Using the computer
Keyboard
34
Touchpad
37
External-type CD drive (ODD, To be purchased)
43
Multi Card Slot (Optional)
45
Connecting an External Display Device (Optional) 48
Connecting an External Digital Device
50
Adjusting the Volume
51
Wired Network
52
Wireless Network (Optional)
55
Keyboard
Chapter 2
Using the computer
34
Shortcut key functions and procedures are discussed in the following sections.
• The keyboard image may differ from the actual keyboard.
• The keyboard may differ depending on your country. The following mainly describes the shortcut keys.
Shortcut Keys
You can use the following functions by pressing the keys below with the Fn key.
+
Shortcut Keys
Name
REST
(Sleep Mode)
Gauge
+
Euro
CRT/LCD
(Optional)
Function
Switches to Sleep mode. To wake the computer up, press the Power button.
Shows the remaining battery charge.
Enters the Euro monetary unit symbol.
This key may not be provided depending on the keyboard type.
Switches the screen output to the LCD or external monitor when an external monitor (or TV) is
connected to the computer.
Keyboard
Shortcut Keys
Chapter 2
Using the computer
Name
Backlight
Mute
Easy Support
Center
+
Silent Mode
Wireless network
35
Function
Turns the LCD backlight on or off.
Mutes or cancels mute.
System diagnosis, recovery and Internet consultation program, Easy Support Center, will be
launched. (Optional)
For some models, Samsung Magic Doctor is launched.
Reduces the Fan noise so that users can use the computer without hearing noise.
In models with a wireless network device, press this key to turn the wireless network device on
or off. (Only for models with a wireless network device.)
Touchpad
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad off.
Num Lock
Turns the numeric keyboard on or off.
Scroll Lock
If you turn the Scroll Lock on, you can scroll the screen up or down without changing the cursor
location in some applications.
Monitor ports are optional,you press the
port.
+
key combination, the screen may just show LCD if the system has no monitor
Keyboard
Chapter 2
Using the computer
Screen Brightness Control
Other Function Keys
Performs the right-click mouse function (touchpad).
+
or
+
Volume Control
+
or
Alternatively, press the
+
If the hot keys do not work properly, you have to install the
Easy Settings.
+
key combination to turn
the volume on or off.
Numeric Key
The numbers are printed in blue on the numeric keys.
If Num Lock is turned on by pressing the
+
key
combination, you can use the numeric keys to enter digits.
36
Touchpad
The touchpad provides the same function as a mouse and the left
and right buttons of the touchpad plays the role of the left and
right buttons of a mouse.
To use the touchpad, the touchpad driver is required.
A built-in Windows driver and a driver provided by the
manufacturer are provided. For a better performance, using the
driver provided by the touchpad manufacturer is recommended.
The driver provided by the touchpad manufacturer is already
installed in this product by default when you purchase this
product. When you reinstall Windows or change the operating
system, using the driver provided by the corresponding
manufacturer is recommended.
• Use the Touchpad with your fingers. Using a sharp object
may damage the Touchpad.
• If you touch the Touchpad or press the Touchpad buttons
while booting up, the Windows boot time may be
extended.
• Checking the touchpad manufacturer
Click the Start > Control Panel > Hardware and Sound
> Mouse > Hardware tab and check the device (E.g. Elan,
Synaptics, etc. ).
• The Windows driver provides basic touchpad functions
(moving the pointer, clicking, etc.) but the gesture function
is not supported.
Chapter 2
Using the computer
37
Touch Area
Use to move
the cursor.
Touchpad Left Button
Touchpad Right Button
You can select or run a
program using this button.
Plays the role of the right
mouse button.
Basic Touchpad Functions
Moving the cursor on the screen
Place your finger on the touchpad slightly and move your finger.
The mouse cursor will move accordingly. Move your finger in the
direction you wish to move the cursor.
Touchpad
Chapter 2
Using the computer
38
Click Function
Right Button Function
Place a finger on the touchpad and click on an item once.
This corresponds to clicking the right mouse button.
Alternatively, press the left button once quickly and release it.
Press the right touchpad button once. The corresponding pop-up
menu appears.
Tap
or
Click
Click
Double-Click Function
Put your finger on the touchpad and quickly tap twice with your
finger on an item you want.
Alternatively, press the left touchpad button twice quickly.
Drag Function
Dragging refers to moving an item to another place after selecting
it.
Press and hold down the left touchpad button over an item you
want to drag and move the item to the new location.
TapTap
or
ClickClick
Move
Holding down the left
touchpad button
Touchpad
The Gesture Function of the Touchpad (Optional)
• The Touchpad Gesture function may not be provided and
the version of the function may differ depending on the
model. Some usage procedures may differ depending on
the version.
Chapter 2
Using the computer
Configuring the Gesture Function
Some gesture functions may not be configured. In this case, you
can configure them using the following path.
1
• For detailed usage procedures, refer to the description in
the Touchpad Settings window.
• Since these descriptions are written on the basis of the
latest operating system, Windows 7, some of the content
and the figures of the descriptions may differ depending
on the operating system. Since the procedures for other
Windows operating systems are similar, use the computer
referring to these descriptions.
Using the Touchpad, you can use the following additional Gesture
functions.
•
Scroll function
•
Zoom functions
•
Page move function
39
► When using the Elan driver
Click the Start > Control Panel > Hardware and Sound >
Mouse > ELAN > Options button.
► When using the Sysnaptics driver
Click the Start > Control Panel > Hardware and Sound >
Mouse > Device Settings tab > Settings button.
2
The Touchpad Settings window appears. Click over the
corresponding item to select the item in the Select an item
and click OK.
To cancel the Gesture function, unselect the corresponding
item in the Touchpad Settings window and click OK.
Touchpad
Chapter 2
Using the computer
40
The Scroll Function
Page Move Function
This function is the same as the scroll area of the Touchpad.
You can move to the previous or next page when you are looking
at a photo or surfing the Internet.
If you place two fingers over the Touchpad and move them up,
down, left or right, the screen is scrolled up, down, left or right
accordingly.
or
Zoom Functions
If you place two fingers over the Touchpad together or apart, the
current image or text is zoomed in or out.
Zoom-in
Zoom-out
or
For example, if you lightly brush three fingers to the left while you
are looking at a web site, you will return to the previous page.
Touchpad
Setting the Touchpad Sensitivity
If the touchpad reacts too sensitively or the pointer moves
unintentionally, please adjust the touchpad pointer speed and
sensitivity.
Adjusting the Touchpad Pointer Speed
Click Start > Control Panel > Hardware and Sound > Mouse >
Pointer Options and then adjust the pointer speed.
Adjusting the Touchpad Palm Detection Function
The palm detection function is to avoid malfunctions when the
palm touches the touchpad by mistake.
This function is provided by the touchpad driver provided by
the manufacturer.
Chapter 2
Using the computer
41
► When using the Elan driver
Click Start > Control Panel > Hardware and Sound > Mouse
> ELAN > Options > PalmTracking and then adjust the
sensitivity.
► When using the Sysnaptics driver
Click Start > Control Panel > Hardware and Sound > Mouse
> Device Settings > Settings > Pointing > Sensitivity >
PalmCheck and then adjust the sensitivity.
When the touchpad pointer does not move smoothly:
Slide the bar appropriately in the direction of Minimum.
Minimum
Maximum
When the touchpad pointer moves unintentionally (excessively):
Slide the bar appropriately in the direction of Maximum.
Touchpad
Chapter 2
Using the computer
42
Touchpad On/Off Function
Locking with shortcut keys
Auto-locking when connecting USB mouse
If you want to use the mouse only without using the touchpad,
you can turn the touchpad off.
► When using the Elan driver
To lock the touchpad function, press the
+
keys.
You can set the touchpad and touchpad button settings in
the tabs that appear when clicking Start > Control Panel >
Hardware and Sound > Mouse.
Click Start > Control Panel > Hardware and Sound > Mouse
> ELAN, and check the Disable When external USB mouse
plug in option. This will turn the touchpad off when a USB
mouse is connected.
► When using the Sysnaptics driver
Click Start > Control Panel > Hardware and Sound > Mouse
> Device Settings, and check the Disable internal pointing
device when external USB pointing device is attached
option. This will turn the touchpad off when a USB mouse is
connected.
In case of some touch-screen model, checking option locks
touchpad even though you did not connect a USB mouse.
This auto-locking function is not provided for some models.
External-type CD drive (ODD, To be purchased)
This computer supports an external USB CD-ROM drive (can be
additionally purchased).
Check if the interface type of the external CD-ROM drive is a USB
type. For detailed specifications, refer to the catalog.
Chapter 2
Using the computer
Connecting the CD Drive
Connect the CD drive to the USB port.
• Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk
drive when the CD rotates at a high speed.
• When you clean a CD or DVD title, wipe with a soft cloth
from inside to outside.
• Do not eject a CD when the CD operating LED is on.
• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
• Using a CD that is not in the shape of a circle is not
recommended.
USB port
43
External-type CD drive (ODD, To be purchased)
Inserting and Ejecting a CD
1
Press the Eject button of the CD drive.
Status Indicator Emergency Hole
Eject Button
2
When the CD tray opens, insert a CD or DVD and push the
tray in until it clicks.
3
Push the CD tray inward until it clicks.
The CD drive status indicator is turned on.
• A CD drive’s reading and writing speed may differ
depending on the condition and type of the media.
• To eject a CD when the CD drive does not work or the
) into
computer is off, place the end of a paper clip (
the Emergency Hole until the CD tray is ejected.
Chapter 2
Using the computer
44
Multi Card Slot (Optional)
Using the multi card slot, you can read and write data to cards.
You can use a card as a removable disk and conveniently
exchange data with digital devices such as a digital camera, digital
camcorder, MP3, etc..
Chapter 2
Using the computer
Using the card
1
Insert a card into the slot according to the directions printed
on the slot.
• Supported Cards : SD Card, SDHC card, MMC card, SDXC
card
• You have to additionally purchase a multi card with the
necessary capacity depending on your requirements.
• You can use a multi card just like any data storage device. A
copyright protection function is not supported.
• Since you can lose a card when moving the computer,
keep the card separately.
• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
• If a slot protection dummy card is inserted into your
computer, remove the dummy card before using the
computer.
• These descriptions are written based on Windows 7, the
latest operating system. Therefore, some descriptions and
figures may differ from your operating system. But as the
usage is similar to other Windows operating systems, you
can use these descriptions for reference.
45
Example)
SD Card
2
The card drive appears. Click Open folder and view files.
If the window does not appear, click Start > Computer.
Multi Card Slot (Optional)
If a window asking to scan and change appears, click
Continue Without Scanning. This will proceed to Step 2
above.
3
You can save, move and delete data by double-clicking the
corresponding drive.
You can only use the card after formatting it.
Chapter 2
Using the computer
Using a Mini SD and RS-MMC
Since the above cards are too small, you cannot insert the cards
into the slot directly.
Insert the card into the dedicated adapter (available from most
electronic retailers) and then insert the adapter into the multi card
slot.
However, depending on the adapter’s body material, some
RS-MMC cards may not be recognized properly. Samsung
recommend that you check the card is recognized correctly prior
to purchasing.
To remove a memory card
Take hold of the end of the card and remove the card.
The device name of the card drive may differ depending on
your computer model.
46
Multi Card Slot (Optional)
To format a memory card
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
1 Click Start > Computer.
over a card drive with the touchpad and select
2 Right-click
Format.
3 Click Start to the formatting.
Chapter 2
Using the computer
47
•• To use a card to exchange data with a digital device such
as a digital camera, formatting the data using the digital
device is recommended.
•• When you try to use a card, which is formatted in the
computer, in another digital device, you may have to
format the card again in the device.
•• You cannot format, write or delete data from a SD, or SDHC
card with a write protection tab when it is in the Lock
position.
•• Inserting and removing a memory card repeatedly may
damage the memory card.
Connecting an External Display Device (Optional)
If you connect an external display device such as a monitor, TV,
projector, etc., you can view the picture on the wider screen of the
external device when you give a presentation or watch a video or
movie.
• Before you start, check the port and cable of the external
display device and then connect the display device to the
computer.
• Due to restrictions of the operating system the DualView
function is not supported for Windows 7 Starter.
Chapter 2
Using the computer
Connecting to the monitor port
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
You can give better presentations by connecting the computer to
a projector.
1
Connect the RGB port of the computer and the port of the
monitor or TV with the monitor cable (15 pin).
External
Monitor
TV
Projector
About the connection cable
Users should additionally purchase the necessary connection
cables.
Analog Monitor (RGB) Cable
48
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Connecting an External Display Device (Optional)
3
Press the
+
key combination once. Then the screen
Since pressing the
key while holding down the
changes the selection, select a display device.
LCD
CRT
LCD+CRT Clone
LCD+CRT Dual View
• If the screen is not switched even if you press
the
appears where you can select a display device.
Chapter 2
Using the computer
+
key combination, you have to install the
Easy Settings program.
key
• Alternatively, to set up dual view:
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
49
Connecting an External Digital Device
You can save a file stored on a device onto the computer by
connecting a digital device such as a camera, camcorder or mobile
phone to the computer and using the file management functions.
Chapter 2
Using the computer
2
The Auto run window appears. Click Open folder and view
files.
If the window does not appear, click Start > Computer.
Connecting and using a camera or camcorder
If a digital device such as a camera or camcorder is connected with
the computer, it is recognized as a removable disk so that you can
copy or move the files on the device.
1
Connect the USB port of the notebook computer and the USB
port of the digital device such as a camera using the USB cable.
• Both the computer and the digital device must be turned on.
• You have to additionally purchase the USB cable necessary
to connect the computer and the device.
Camera
3
50
Double-click the corresponding drive. You can then save,
move or delete data.
Camcorder
The device name of the card drive may differ depending on
the model.
Adjusting the Volume
Chapter 2
Using the computer
You can adjust the volume using the keyboard and the volume
control program.
Adjusting the Volume using the Keyboard
+
Alternatively, press the
+
or
+
key combination to turn
the volume on or off.
Adjusting the Volume using the Volume Adjustment
Program
Click the Volume icon on the taskbar and slide the volume
control bar to adjust the volume.
Mute
51
Using the Sound Recorder
The procedures to record sound using the Windows Recorder are
described below.
1
Connect a microphone to the microphone jack.
2
Right-click over the Volume icon
Recording Device.
3
Check if the microphone is set as the default recording
device.
You can also use the internal MIC. (Optional)
on the taskbar and select
If this is the case, it is already set as the default device. If not,
right-click over the microphone and select Set default.
4
Click Start > All Programs > Accessories > Sound Recorder
and click Start recording to start a recording.
Wired Network
A wired network is a network environment used for a company
network or broadband internet connection at home.
Chapter 2
Using the computer
2
52
Click Start > Control Panel > Network and Internet >
Network and Sharing Center and click on Change adapter
settings in the left menu pane.
• Since these descriptions are written on the basis of the
latest operating system, Windows 7, some of the content
and the figures of the descriptions may differ depending
on the operating system. Since the procedures for other
Windows operating systems are similar, use the computer
referring to these descriptions.
• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
1
3
Select Local Area Connection and click the right button of
the touch pad and select Properties.
Connect a LAN cable to the computer’s LAN port.
The LAN Device name may differ depending on your
computer’s Network Device.
Wired Network
4
Select Internet Protocol Version 4(TCP/IPv4) from the list
of Network Components and click Properties.
Chapter 2
Using the computer
5
• The Network Component name may differ depending on
the Operating System Installed.
• To add a network component, click Install in the screen
shown in the figure above. You can add clients, services,
and protocols.
53
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select Use the
following IP address, and set the IP address manually.
When not using DHCP, ask your network administrator for the
IP address.
6
When you have completed the settings, click the OK button.
The network settings have been completed.
Wired Network
Using the <Wake On LAN> Function
<Wake On LAN> is a function that activates the system from Sleep
mode when a signal (such as a ping or magic packet command)
arrives over the network (wired LAN).
Start > Control Panel > Network and Internet >
1 Click
Network and Sharing Center and click on Change adapter
settings in the left menu pane.
on the Local Area Connection and select
2 Right-click
Properties.
Configure > Power Management tab. Select Allow
3 Click
this device to bring the computer out of standby, then
click OK. Restart the system.
- If the system wake up from Sleep mode even though there
is no received signal, use the system after disabling the
<Wake On LAN> function.
- The LAN LED may not be turned off if System is shutdown
without disabling the WOL <Wake on LAN> option.
- Connecting a wired LAN while using a wireless LAN may not
activate the <Wake On LAN> function. Set the Wireless LAN
to Disable to use the <Wake On LAN> function.
- <Wake On LAN> feature may not work while using Hybrid
power saving feature.
Chapter 2
Using the computer
54
For Windows 7, Wake On LAN is not supported Ping.
When connected to a 100Mbps/1Gbps wired LAN and the
computer exits Sleep/hibernation mode, a message appears
informing you of a connection to a 10Mbps/100Mbps
wired LAN. This happens because when the computer exits
standby/hibernate mode, restoring the network takes about
3 seconds. When the network is restored, it operates at
100Mbps/1Gbps.
When system is running on battery, some time it takes about
20sec after inserting LAN cable to be able to connect to
internet. This symptom happen as a result of power saving
feature to reduce battery consumption.
When system is running on battery, the Wired LAN speed
is decreased automatically to reduce battery consumption.
In such case, a 1Gbps /100Mbps LAN would function at
100Mbps/10Mbps speed.
Wireless Network (Optional)
A wireless network (Wireless LAN) environment is a network
environment that enables communicating between multiple
computers at home or a small-size office through wireless LAN
devices.
Chapter 2
Using the computer
55
• The screen figures and terms may differ depending on the
model.
• Depending on the program version, some functions may
not be provided or different functions may be provided.
• The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional.
The pictures in this manual may differ from the actual
product depending on your wireless LAN device model.
• If the wireless LAN is turned off, press the
combination to turn it on.
+
key
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless LANs,
and corresponds to a wireless hub in a wired network. You can
connect multiple wireless LAN installed computers to an AP.
Wireless Network (Optional)
Chapter 2
Using the computer
56
Connecting to a Wireless LAN through Windows
If there is an AP, you can connect to the Internet via the AP using
the Wireless LAN connection method provided by Windows.
1
If you click the Network Connections
icon in the system
tray, a list of available APs appears. If you select an AP to
connect to, the Connect button appears.
AP List
3
When Connected to the AP is displayed, click the Close
button.
You can access the network.
2
Click Connect.
If a network key is set for the AP, enter the network key and
then click Connect.
For the network key, please ask your network administrator.
Normal Wireless Network Status
If the wireless LAN icon is displayed in the system tray of the
Taskbar, it indicates that the computer is connected to the Internet
properly (see below).
Wireless Network (Optional)
Chapter 2
Using the computer
57
When APs are found but your computer is not
connected to the Internet
Abnormal Wireless Network Status
When the wireless LAN is not connected
If the wireless LAN icon is displayed with an “X” in the system
tray of the Taskbar, it indicates that the wireless LAN device is
turned off or that there are no available APs. Or the wireless LAN is
disconnected.
This is the case when an AP with a weak signal has been set to
a high priority. Connect to an AP with a strong signal by clicking
it.
The currently connected AP.
The signal strength is low.
An AP with a strong signal strength
If the wireless LAN is turned off, press the
+
key
combination to turn it on.
When you are not connected to the Internet
This is indicated by the wireless LAN icon
in the system tray of
the Taskbar. In this case, you have to check the IP address settings.
Please contact your network administrator and reconfigure the IP
address.
Click
Chapter 3.
Settings and Upgrade
LCD Brightness Control
59
Integrated configuration program
(Easy Settings, Optional)
61
BIOS Setup
62
Setting a Boot Password
64
Changing the Boot Priority
67
Upgrading Memory
68
Battery
70
Using the Security Slot
75
LCD Brightness Control
Chapter 3
Settings and Upgrade
You can adjust the LCD brightness in 8 levels.
The screen brightness is automatically set to the brightest
level (brightness level 8) when AC power is connected and the
brightness is automatically set dimmer when the computer
runs on battery power to extend the battery use time.
Controlling the Brightness Using the Keyboard
Adjust the LCD brightness by pressing the
+
+
key or the
key.
The LCD brightness can change up to 8 levels and the brightness
increases by 1 level when pressing the
+
key once.
59
• Maintaining the changed LCD brightness even after
turning the computer on again
To maintain the LCD brightness set by using the brightness
control keys or through the Power Options, follow the
procedures below.
1. Click Control Panel > Hardware and Sound > Power
Options.
2. Click Change the settings of the currently configured
mode.
3. Adjust the display brightness adjustment menu bar and
click the Save the changes button.
• Saving battery power consumption
Decreases the LCD brightness when the computer
is running on battery power to save battery power
consumption.
LCD Brightness Control
• LCD bad pixels principle of computer
Samsung observes the specifications regarding strict
quality and reliability of LCD. But in spite of that, it is
inevitable that there might be a small number of bad
pixels. A large number of bad pixels can cause problems in
appearance, but a small number of pixels doesn’t affect the
computer performance.
Therefore Samsung observes and manages the following
dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with
computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the
LCD.
Chapter 3
Settings and Upgrade
60
Integrated configuration program (Easy Settings, Optional)
The Easy Settings is the integrated Samsung software control
program that allows users to configure various settings.
• This description is for models that support this function
running on Windows 7.
1
2
Click Start > All Programs > Samsung > Easy Settings.
Select an item to configure the corresponding function.
61
Functions
General
• The screen image and terminology may change depending
on the model.
• Depending on the program version, some functions may
not be provided or different functions may be provided.
Chapter 3
Settings and Upgrade
Power
Management
Wireless Network
Wired Network
Display
Screen Saver
You can configure the Battery Life Extender,
Fast Start, Silent Mode, Speed Boot and User
Account Control.
You can configure the Power Plan (highperformance, power-saving, Samsung optimal
mode), Eco Mode, the power-saving settings
and the display settings.
You can configure whether to use the Bluetooth
and Wi-Fi options.
You can select automatic or fixed IP settings.
You can configure external display devices, and
the screen brightness/color.
You can configure the screen saver.
BIOS Setup
The BIOS Setup enables you to configure your computer hardware
according to your needs.
• Use the BIOS setup to define a boot password, change the
booting priority, or add a new device.
• Since incorrect settings may cause your system to
malfunction or crash, take care when configuring the BIOS.
Chapter 3
Settings and Upgrade
62
Entering the BIOS Setup
1
2
Turn the computer on.
When the booting screen (SAMSUNG logo) appears, press the
F2 key to enter the BIOS Setup.
• The functions of the BIOS setup are subject to change for
product function enhancement purposes.
• The BIOS Setup menus and items may differ depending on
your computer model.
The screen images in this document may differ from actual
product.
3
After a moment, the BIOS setup screen appears.
The items in the BIOS setup may differ depending on the
product.
BIOS Setup
Chapter 3
Settings and Upgrade
System Setup Keys
The BIOS Setup Screen
The BIOS Setup menus and items may differ depending on
your computer model.
Setup Menu
Help
Help for the
selected
item appears
automatically.
Setup Items
Setup Menu
SysInfo
63
Description
This is a description about the basic specifications
of the computer.
In the Setup, you have to use the keyboard.
F1
Press to view the Setup Help.
Up & Down
Keys
Press to move up and down.
F5/F6
Press to change the item value.
F9
Press to load the default Setup
settings.
ESC
Press to return to a higher level
menu or to move to the Exit menu.
Left & Right
Keys
Press to move to another menu.
Advanced
Using this menu, you can configure the major
chipsets and additional functions.
Enter
Press to select an item or to enter a
sub menu.
Security
Used to configure security functions, including
passwords.
F10
Press to save the changes and exit
Setup.
Boot
This menu enables you to configure peripherals and
booting related settings such as the boot priority.
Exit
Used to exit the Setup either saving the changes or
not.
The keyboard image may differ from the actual keyboard.
Setting a Boot Password
Chapter 3
Settings and Upgrade
64
XXXXXXXX
When setting a password, you have to enter a password to use the
computer or enter the BIOS Setup.
2
In the Set Supervisor Password item, press <Enter>.
3
Enter a password, press <Enter>, re-enter the password for
confirmation, and press <Enter> again.
By configuring a password, you can restrict system access to
authorized users only and protect data and files saved on the
computer.
• Do not lose or forget your password.
• If you have forgotten your password, contact a Samsung
service center. In this case, a service fee will be charged.
• The BIOS Setup menus and items may differ depending on
your computer model.
The password can be up to 8 alphanumeric characters.
Special characters are not allowed.
Setting a Supervisor Password
A Supervisor Password is required to turn the computer on or to
start the System Setup.
When setting a Supervisor Password, users other than a supervisor
cannot use the computer.
1
Select the Security menu in the BIOS Setup.
4
The supervisor password has been set.
The supervisor password is required to turn the computer on
or to enter the BIOS Setup.
For some models, if the password entered message appears
in the Setup Notice window, the settings are not complete
until the <Enter> key is pressed.
Setting a Boot Password
Setting a User Password
Chapter 3
Settings and Upgrade
65
Setting up a Hard Disk Drive Password
(Optional)
Users can start the system with a User Password, but cannot
access to the system setup options. Enter the Supervisor
Password to change the system setup.
A supervisor password must be set using the Set Supervisor
Password menu.
Before configuring a user password, a Supervisor password must
have been configured. Deactivating the supervisor password also
deactivates the user password.
Press <Enter> in the Set HDD Password item and define a
password as described in Step 3 of the Setting up the Supervisor
Password.
In the Set User Password item, press <Enter> and complete the
procedures from Step 3 of Setting a Supervisor Password.
Setting Up a Boot Password
To setup a boot password, the administrator password (Set
Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled.
Once a boot password is set, you have to enter a password to boot
up the computer.
•• The hard disk drive password setting function is not
provided for some models.
•• Changing the hard disk drive password
For security purposes, you can only change a hard disk
drive password after restarting the computer by pressing
the computer Power button.
If you cannot change the hard disk drive password or the
HDD Password Frozen message appears when entering
the BIOS Setup and then selecting Security > HDD
Password, press the Power button to turn the computer
on again.
Setting a Boot Password
Deactivating the Password
1
Press <Enter> on the password to be deactivated. For
example, to deactivate a supervisor password in the Set
Supervisor Password item, press <Enter>.
2
In the Enter Current Password item, enter the currently
configured password and press <Enter>.
3
Leave the Enter New Password item field empty, and press
<Enter>.
4
Leave the Confirm New Password field empty, and press
<Enter>.
The password is deactivated.
For some models the password is only canceled if the
<Enter> key is pressed in the Setup Notice window.
Chapter 3
Settings and Upgrade
66
Changing the Boot Priority
This computer is configured to boot from an external-type ODD
first.
The screen images and terms may differ from actual product
depending on the computer model and driver version.
1
2
Select the Boot menu in the BIOS Setup.
XXXXXXXX
Press <Enter> on the Boot Device Priority item.
3
Press the down key (↓) to select the boot device and then
press the F6 key to move it to the top.
4
Press the F10 key to save the settings and exit Setup.
The highest boot priority device is now set to the Hard Drive.
Chapter 3
Settings and Upgrade
67
Upgrading Memory
Chapter 3
Settings and Upgrade
A memory is installed in the memory slot at the bottom of this
computer. The procedures to replace the memory are described
below.
68
When the memory compartment cover is at the bottom
• Replace new memory only after shutting the computer
down completely. Do not replace memory when the
computer is in Sleep mode. Disconnect main power plug
and remove the battery before continuing.
• The images used for the illustration are of a representative
model, therefore the images may differ from the the actual
product.
Fixing Screw
Replacing the Memory
1
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
2
Pull the memory module latches outward. The memory
module will pop up.
Remove the memory module out at an angle of 30 degrees.
Fixing Screw
Memory
module latches
Upgrading Memory
3
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
4
Push the memory module down so that it is completely fixed.
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
Memory
module latches
Chapter 3
Settings and Upgrade
5
69
Close the memory compartment cover and fasten the screw.
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Chapter 3
Settings and Upgrade
Charging the Battery
1
Attach the battery and connect the AC adapter to the DC-in
jack of the computer.
The battery will then start charging.
• Carefully read and follow the precautions printed on the
battery before using the battery.
• Before using your computer for the first time after
purchasing it, charge the battery completely.
Precautions
• Use only chargers specified in the User Manual.
• Never heat the battery pack, put it near or in a fire or use at
a temperature higher than 60°C, as this may cause fire.
• Never cause a short circuit between the battery pack
terminals or disassemble the battery pack.
• Carefully read and follow the precautions printed on the
battery and the safety instructions in the User Manual
before using the battery.
• Please refer to the system operation environment of
this manual and operate and store the battery at room
temperature.
70
2
When charging is complete, the Charge LED turns green.
Status
Charge LED
Charging
Red or orange
Charging complete
Green
AC adapter not
connected
Off
Battery
Chapter 3
Settings and Upgrade
Measuring the Remaining Battery Charge
71
Battery Usage Time Information
You can view the battery charge status by completing the
following procedures.
A battery is an expendable supply, so when using it over a long
time, the capacity/battery life is shortened. If the battery life is
reduced to under half of its initial time, we recommend purchasing
a new battery.
To use the shortcut key to view
When not using the battery for a long time, store the battery after
charging it to 30-40% of its capacity. This extends the battery life
time.
Press the
+
keys on the keyboard. The remaining
battery charge (%) will displayed for a moment.
You can only view the charge status in this way when Easy
Settings is installed on your computer.
Confirming the battery charge in the Taskbar
Disconnect the AC adapter and move the mouse cursor over
the battery icon in the system tray of the Taskbar to confirm the
remaining battery charge.
Battery
Chapter 3
Settings and Upgrade
Extending the Battery Usage Time
2
72
If the following screen appears, select one of the modes.
Decreasing the LCD Brightness
Press the
+
keys on the keyboard to decrease the LCD
brightness to extend the battery usage time.
Using the power management program
This program helps you use the battery more efficiently
and supports the power mode optimized for the operating
environment.
1
Click Start > Control Panel > Hardware and Sound >
Power Options.
Alternatively, right-click the power measuring device icon
in the notification area of the taskbar and select Power
Options.
• What is the Power-saving Effect?
This product displays the battery life in each power mode.
The higher the power saving effect increases, the longer
the graph bar is displayed.
• When Using Games or Multimedia
The system may not operate properly in maximum battery
mode. It is recommended to connect the AC adapter to the
system or to use the system in general mode.
• Usage Mode of Samsung Battery Manager
- The maximum battery mode optimizes the system
operation speed to increase the battery run time, so the
program execution time may get longer.
- If you change the power settings, the properties in Power
Options window will also be changed.
Battery
Chapter 3
Settings and Upgrade
73
Extending the Battery Life (Optional)
Using the Battery Calibration Function
In the Easy Settings program, click General and set the Battery
Life Extender to ON or OFF.
When charging/discharging the battery repeatedly for a short time
only, the battery usage time may be reduced by the difference
between the actual battery charge and the remaining charge
display.
OFF
This mode maintains 100% of the battery charge when
using the computer on AC power. In this case, although
the battery use time increases, the battery life is
reduced.
ON
This mode maintains 80% of the battery charge when
using the computer on AC power. In this case, although
the battery use time decreases, the battery life is
extended.
Alternatively, to extend the battery life
Press the F2 key when the Samsung logo appears in the
booting sequence to enter the BIOS Setup, select Advanced
> Battery Life Cycle Extension, and set it to Enable.
Then you can use the battery life cycle extension mode.
In this case, the actual battery charge and the remaining charge
display will be the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
The screen images and terms may differ from actual product
depending on the computer model and driver version.
1
Disconnect the AC power adapter after turning off the
computer.
2
Restart your computer and press the F2 button when the
Samsung logo appears, to start the BIOS Setup.
Battery
3
4
XXXXXXXX
Move to the Boot > Smart
Battery Calibration item using
the direction keys and press <Enter>.
Chapter 3
Settings and Upgrade
74
Installing/Removing the Battery
1
Shutdown the system, close the LCD panel and place the
computer upside down on a flat surface.
2
Slide the battery latches outwards
battery.
3
To install the battery again, slide the battery into the system.
and separate the
Highlight Yes in the Battery Calibration Confirmation
window and press <Enter>.
The Battery Calibration function is activated and the battery
is forcefully discharged. To stop the operation, press the
<Esc> button.
This operation requires 3~5 hours depending on the battery
capacity and the remaining battery charge.
The battery latches move inwards and fix the battery
automatically.
Check if the battery latch has been moved inwards.
Using the Security Slot
You can secure the computer by connecting a lock and cable to
the Security Slot.
To use this feature, you have to purchase the lock and cable
additionally.
To use the lock and cable, refer to the product manual.
Tie the lock and cable to a fixed object and install the other end of
the cable to the security slot.
Chapter 3
Settings and Upgrade
75
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
77
Samsung Recovery Solution (Optional)
Samsung Recovery Solution is a program that enables restoring
or backing up the hard disk drive for when a problem occurs with
the computer.
If the computer fails to boot up, you can restore the computer by
pressing the F4 key in the booting screen.
• Samsung Recovery Solution may not be provided or the
version may differ depending on the model. In addition,
some functions may not be provided or may differ
depending on the version.
For more information on using Samsung Recovery
Solution, please refer to the online help of the program.
• The screen images in this document may differ from actual
product.
Chapter 4.
Backup / Restore
77
Samsung Recovery Solution Functions
Backup/Restore Functions
Backup Function
Backs up drive C or required folders and files.
• Complete Backup
Backs up drive C.
A problem
occurs
• Data Backup
Backs up important folders and files.
Restore Function
Restores major Windows files, drive C, or
folders and files to the previous state.
• If your computer does not have an internal ODD, you need
an external ODD connected to your computer to use the
Backup Function or Restore Function using DVDs.
• Basic Restore
• The System Software function may not be provided
depending on the program version.
• Complete Restore
Restores only major Windows files in a short
time.
VIRUS
Restores drive C to the previous, normal
state.
• Data Restore
Restores important files or folders to the
previously backed up state.
Samsung Recovery Solution (Optional)
System Software Functions
Samsung Recovery Solution provides system software so that
you can reinstall or copy the device drivers and system software
necessary for normal operations onto a separate storage device.
Chapter 4.
Backup / Restore
1
2
Not only can you use Samsung Recovery Solution when Windows
is running, but also when you are unable to boot up into Windows.
Let’s learn how to use Samsung Recovery Solution.
If you turn your computer on for the first time, the Initial Status
Backup function is performed after registering Windows. This
function saves an image of the Initial Status of the C drive to a
secure location so that users can restore the computer to the
Initial Status using the Complete Restore function. An Initial Status
Backup is only performed once immediately after the computer is
purchased.
After the computer has been restarted, the Partition Setup
screen appears.
The Partition Setup function is only available when the
computer is turned on for the first time and will not
be available afterwards. Once you have completed the
partitioning, it cannot be resized. Partition the disk carefully.
Optional functions such as Initial State Image, Initial Status Backup,
and Partitioning are only available in some models.
Partition Setup & Initial Status Backup
If you turn the power on for the first time, the Register
Windows screen appears. If you register Windows according
to the instructions on the screen, the computer will be
restarted.
To resize the C and D drives, adjust the partition size using
the slide bar and the click Next.
Restore Function
If the image of the initial state is saved on a DVD or removable
storage device, connect the DVD drive or removable storage
device to the computer before using the function.
78
3
4
5
The Initial Status Backup screen appears.
To continue the Initial Status Backup, click Restart Now. The
computer will restart.
The Initial Status Backup is performed to backup the initial
status of the C drive to a secure location. This backup image
is used for the Complete Restore function that restores your
computer to the initial status.
When the Initial Status Backup is complete, restart Windows.
Samsung Recovery Solution (Optional)
Restoring the computer
Restore is a function that enables restoring the computer to a
saved point when the computer was purchased or a user-saved
point.
Chapter 4.
Backup / Restore
2
If the initial menu screen appears, click Restore.
The Restore function provides the Basic Restore and Complete
Restore options.
1
– When Windows is running:
Click Samsung Recovery Solution.
– When Windows does not start:
Turn the computer on and press the F4 key when the boot
screen (SAMSUNG logo) appears. After a moment, the
computer boots up in Restoration mode and the Samsung
Recovery Solution screen appears.
For computers supporting the touch screen function, the
touch screen function does not work during Restore Mode. In
this case, please use the touchpad or mouse.
If you click Select by Symptom, the Select by Symptom
menu appears. If you select a symptom, a recommended
restoration option will blink. Click the restoration option to
continue.
79
Samsung Recovery Solution (Optional)
3
Chapter 4.
Backup / Restore
Select either Basic Restore or Complete Restore from the
Restore menu.
80
In the Advanced menu, you can change the size of the hard
drive partitions (e.g. C: and D:).
To restore the computer to the initial state, click Computer
Initial State and perform the restoration process according
to the instructions that appear on the screen.
• Make sure to backup your data in advance, as all data will
be deleted after the partition size is changed.
• The Advanced menu is only activated when the computer
boots up in the restoration area.
(by pressing the F4 key during the booting sequence.)
Since a Complete Restore deletes all user data as well
as additionally installed programs, please backup your
important data first using the Data Backup function, before
running Complete Restore.
4
Run Complete Restore if the computer does not work even
after Basic Restore has been completed.
5
The computer boots up into restoration mode and the
restoration progress message appears. If you click OK, the
restoration begins. The restoration may take some time,
please wait for a moment.
When the ‘Restart the System’ message appears after the
restoration is complete, click OK to restart the system.
Make sure that the power cord is connected while the
restoration is in process. The first time the computer boots
up after a Complete Restore has been performed, the speed
of the boot process may be slowed down due to the system
optimization process. At this time, do not shut the computer
down by force.
Samsung Recovery Solution (Optional)
Chapter 4.
Backup / Restore
81
Complete Backup/Restore
A Complete Backup saves the complete image of the C drive
onto another drive or DVD. A Complete Restore restores the
image file saved by the Complete Backup onto the C drive.
Complete Backup
If you perform the Complete Backup function onto a DVD or
removable storage device, you can restore your computer
even when a problem occurs with the hard disk or when the
restoration area is removed.
To create a backup, a removable storage device with at least
15 GB of free space is required.
1
Click Backup in the start screen of the Samsung Recovery
Solution.
2
Enter a description of the current status of the computer and
click Next.
After connecting a DVD drive or removable storage device,
you can specify the DVD drive or removable storage device
as the Save Path.
Select Drive D.
3
Select the DVD drive.
When the option selection item appears, select an option
and click Next.
The LiveImaging and System Software Backup functions are
supported as options for the Complete Backup operation.
• LiveImaging: Performs the Complete Backup operation
while Windows is running. The backup operation using
LiveImaging may slow down if the hard disk drive is
accessed frequently by other applications.
• System Software Backup: This function backs up the
system software on to the DVD after the completion of the
Complete Backup operation.
Samsung Recovery Solution (Optional)
4
When the system restarts in Restoration Mode, the Complete
Backup operation begins. Continue with the backup by
following the instructions.
• Samsung Recovery Solution supports the DVD+R, DVD-R,
DVD+RW and DVD-RW formats.
• If the LiveImaging option has been selected, the Complete
Backup operation begins without the computer being
restarted.
5
Continue with the Complete Backup operation by following
the instructions.
Chapter 4.
Backup / Restore
6
82
When the ‘Restart the System’ message appears after the
backup is complete, click OK to restart the system.
If the LiveImaging option has been selected, the computer is
not restarted.
Samsung Recovery Solution (Optional)
Complete Restore
1
Chapter 4.
Backup / Restore
3
– When backing up onto DVD
83
Select a Complete Backup restoration point in the
restoration point selection screen and click the Next button.
The system is restarted.
Turn the computer on and insert the backup DVD into the
DVD drive.
If there are multiple backup DVDs, insert the first DVD.
– When backing up to a removable storage device
Connect the removable storage device.
– When backing up to another drive
Proceed to Step 2.
2
When the Samsung Recovery Solution start screen appears,
click Restore and then click Complete Restore.
4
The restoration progress message appears after the computer
boots up in restoration mode. If you click OK, the restoration
begins.
If multiple DVDs have been used for a Complete Backup,
whenever burning a DVD is completed, the “Insert the next
DVD” message will appear.
5
When the ‘Restart the System’ message appears after the
restoration is complete, click OK to restart the system. The
Complete Restore has been completed.
Samsung Recovery Solution (Optional)
Chapter 4.
Backup / Restore
84
Data Backup/Restore
The Data Backup function enables you to backup specific files
and folders to another drive, DVD or removable storage device.
Data Restore enables you to restore data using the data saved by
a Data Backup when data is lost. This guide describes the Backup
and Restore procedures on the basis of backing up and restoring
by using DVD.
Data Backup
1
2
3
When the Samsung Recovery Solution start screen appears,
click Backup and then click Data Backup.
Select Drive D.
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungRecovery\SamsungData folder
is created on the corresponding drive (e.g. D:\) and the data
is saved to the folder. Take care to not delete the folder by
mistake or on purpose.
In the data selection screen, select either Basic Selection or
Select from all, select a folder or file to be backed up, and
then click the Next button.
Enter a description for the backup in the Description field
so that you can easily recognize it later and specify the Save
Path.
Select the DVD drive.
4
If your computer has a DVD-Writer, you can specify the DVD
drive as the Save Path.
5
If you click the Next button, the Data Backup begins. If you
have selected the DVD drive as the Save Path, the “Insert a
blank DVD” message appears. Insert a blank DVD and click
the OK button.
The “Backup is completed” message appears.
Samsung Recovery Solution (Optional)
Data Restore
backing up onto DVD
1 – When
Turn the computer on and insert the backup DVD into the
DVD drive.
– When backing up to a removable storage device
Connect the removable storage device.
– When backing up to another drive
Proceed to Step 2.
the initial menu screen appears, click Restore and then
2 When
click Data Restore.
a backup item to be restored in the backup list and
3 Select
click the Next button.
a folder for the restoration and click the Next button.
4 Select
Data Restore begins.
Data Restore is completed, check if the data has been
5 When
restored to the specified folder.
Chapter 4.
Backup / Restore
85
Samsung Recovery Solution (Optional)
System Software Function
The System Software function is a function that enables you to
reinstall device drivers and System Software Programs or back up
those programs.
Chapter 4.
Backup / Restore
86
Installing System Software
1
When the initial menu screen appears, click System Software
> System Software Installation.
The system software function is supported by Samsung
Recovery Solution version 4 or later. Therefore, the
function may not be supported depending on the version.
The System Software Installation Function only works in
Microsoft Windows.
2
3
When the Samsung System Software screen appears, check
all the device drivers and application programs you want to
install and then click Install Now.
After the installation is complete, the computer will restart.
Samsung Recovery Solution (Optional)
Chapter 4.
Backup / Restore
System Software Backup
1
When the initial menu screen appears, click System Software
> System Software Backup.
2
Specify the Save Path.
87
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungSoftware folder is created on
the corresponding drive (e.g. D:\) and the system software
programs are saved to that folder. Take care to not delete the
folder.
3
If your computer has a DVD-Writer, you can specify the DVD
drive as the Save Path.
4
If you click the Next button, the Software Backup begins. If
you have selected the DVD drive as the Save Path, the “Insert
a blank DVD” message appears. Insert a blank DVD and click
the OK button.
After the backup, the System Software Backup is
completed message appears.
• If you want to install the System Software Programs backed
up on the drive, run the SoftwareMediaXX.exe file in the
SystemSoftware folder.
• When installing System Software Programs from the
backed-up DVD, insert the DVD and follow the System
Software Installation directions.
• To delete Samsung Recovery Solution, refer to the Help
section of the program.
Select Drive D.
Select the DVD drive.
Samsung Recovery Solution (Optional)
Chapter 4.
Backup / Restore
88
Recovery Solution Representation (Optional)
What is a Recovery Area?
•• Samsung computers have an additional partition to recover
computers or save backup files.
(Only for models with the Samsung Recovery Solution.)
This partition is called a Recovery Area and it includes a recovery
image that comprises of the OS and application programs.
•• You can either double-click the Samsung Recovery Solution icon
on the desktop or press F4 while booting the computer to enter
the Recovery Area. Then you can back up the present computer
state or recover the computer from backed up images.
•• For deleting the Recovery Area, you need to use an additional
Recovery Area Removal Tool. After deleting the recovery area,
you can use the newly created partition for other uses, such as
for saving personal data. Be careful that once the recovery area is
deleted, the Samsung Recovery Solutions will not work anymore.
The capacity representation of the hard disk drive(HDD)
in Windows is different from the product specifications.
•• The capacity of the storage device (HDD) of the manufacturer is
calculated assuming that 1KB=1,000 Bytes. However, the operating
system (Windows) calculates the storage device capacity assuming
that 1KB=1,024 Bytes, and therefore the capacity representation of
the HDD in Windows is smaller than the actual capacity.
This is due to the difference in capacity calculation and does
not mean the installed HDD is different from the product
specifications.
•• The capacity representation in Windows may be smaller than the
actual capacity because some programs occupy a certain area of
the HDD outside of Windows.
•• For models with Samsung Recovery Solution, the HDD capacity
representation in Windows may be smaller than the actual
capacity because Samsung Recovery Solution uses a hidden area
of about 5~20GB of the HDD to save the recovery image, and
that hidden area is not counted towards the total size available to
Windows.
The size of Samsung Recovery Solution varies by models because
of the different size of applied programs.
Chapter 5.
Appendix
Important Safety Information
90
Replacement Parts and Accessories
92
Regulatory Compliance Statements
94
WEEE Symbol Information
109
TCO Certified
110
Product Specifications
111
Glossary
113
Index
117
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest standards
for safety of information technology equipment. However, to
ensure safe use of this product, it is important that the safety
instructions marked on the product and in the documentation are
followed.
Always follow these instructions to help guard against
personal injury and damage to your system.
Setting Up your System
•• Read and follow all instructions marked on the product and in
the documentation before you operate your system. Retain all
safety and operating instructions for future use.
•• Do not use this product near water or a heat source such as a
radiator.
Chapter 5
Appendix
90
•• If your computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
•• Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when you set up your work area. Never insert
objects of any kind into the computer ventilation openings.
•• Ensure that the fan vents on the bottom of the casing are clear
at all times. Do not place the computer on a soft surface, doing
so will block the bottom vents.
•• If you use an extension cord with this system, make sure that the
total power rating on the products plugged into the extension
cord does not exceed the extension cord power rating.
•• For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause disturbing reflections from surrounding light and bright
surfaces.
•• Set up the system on a stable work surface.
•• The product should be operated only with the type of power
source indicated on the rating label.
•• Ensure that the electrical outlet you are using to power your
equipment is easily accessible in case of fire or short circuit.
NB Ver 2.9
Important Safety Information
Chapter 5
Appendix
Care During Use
The Instruction On Safety Operation of NotePC
•• Do not walk on the power cord or allow anything to rest on it.
1. When installing and operating devices please refer to safety
requirements in the user guide.
•• Do not spill anything on the system. The best way to avoid
spills is to not eat or drink near your system.
•• Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement insure
that a qualified technician performs the task.
•• When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
•• Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
91
2. Devices can be used only with the equipment specified in the
technical specifications of the devices.
3. If any smell of burning or smoke is detected from the computer
the unit should be switched off and battery removed. The unit
should be checked by a qualified technician before reuse.
4. Service and repair of devices should be carried out by
authorized service centers.
5. Do not allow your portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by
manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and dental
facilities, oxygen rich environments, or industrial areas.
Chapter 5
Appendix
92
Laser Safety
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
• Laser Safety Note:
Battery Disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure
of a CD or DVD drive.
• Class 1M laser radiation when operating part is open.
Contact the Samsung Helpline for information on how to dispose
of batteries that you cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Do not view directly with optical instruments.
• Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
Replacement Parts and Accessories
Connect and Disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Do not unplug the power cord by pulling the cable only.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
Chapter 5
Appendix
93
General Requirements
The requirements listed below are applicable to all countries:
•• All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
•• The power cord set must have a minimum current capacity
of 7 A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system. (USA ONLY)
•• The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector,
for mating with appliance inlet on the computer.
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. The following
section is a general overview of considerations while operating a
wireless device.
Additional limitations, cautions, and concerns for specific countries
are listed in the specific country sections (or country group
sections). The wireless devices in your system are only qualified for
use in the countries identified by the Radio Approval Marks on the
system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval
agency for requirements. Wireless devices are closely regulated
and use may not be allowed.
The RF field strength of the wireless device or devices that may
be embedded in your notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Chapter 5
Appendix
94
• Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wifi) and
Bluetooth communication devices are examples of devices
that provide wireless communication.
• In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable
gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When
in environments where you are uncertain of the sanction
to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
• Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
• If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless
all covers and shields are in place and the system is fully
assembled.
Regulatory Compliance Statements
• Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Please contact manufacturer for
service.
• Only use drivers approved for the country in which
the device will be used. See the manufacturer System
Restoration Kit, or contact manufacturer Technical Support
for additional information.
Chapter 5
Appendix
95
United States of America
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in an
explosive environment unless the device has been modified
to be qualified for such use.
Regulatory Compliance Statements
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne operation
of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes
or modification to said product not expressly approved by
Intel could void the user’s authority to operate this device.
Chapter 5
Appendix
96
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause
harmful interference. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and
receiver.
•• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician
for help.
Regulatory Compliance Statements
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Intentional emitter per FCC Part 15
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
Chapter 5
Appendix
97
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and /or damage this device.
This transmitter must not be collocated or operate in conjunction
with any other antenna or transmitter except the installed
Bluetooth transmitter.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify
them in any way.
Modification to a wireless device will void the authorization
to use it. Contact manufacturer for service.
Regulatory Compliance Statements
FCC Part 68 (If fitted with a modem device.)
This equipment compiles with part of the FCC rules. On the
back of this equipment is a label that contains, among other
information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information
must be provided to the telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected
to the telephone network or promises wiring using a compatible
modular jack which is Part 68 compliant. See Installation
Instructions for details.
The REN is used to determine the quantity of devices which may
be connected to telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum REN for
the calling area.
If the terminal equipment causes harm to the telephone network,
the Telephone Company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
Chapter 5
Appendix
98
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone
company will provide advanced notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (Modem) for repair
or warranty information, please contact your local distributor.
If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the
equipment until the problem is resolved.
The user must use the accessories and cables supplied by the
manufacturer to get optimum performance from the product.
No repairs may be done by the customer.
This equipment cannot be used on public coin phone service
provided by the telephone company. Connection to party line
service is subject to state tariffs.
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including fax machines, to send any message unless such
message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business
or other entity, or other individual sending the message and the
telephone number of the sending machine or such business, other
entity, or individual. (The telephone number provided may not
be any number for which charges exceed local or long-distance
transmission charges.)
In order to program this information into your fax machine, refer
to your communications software user manual.
Regulatory Compliance Statements
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limitesapplicables aux appareils
numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par Industrie Canada.
Intentional Emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this
device.”
L‘ utilisation de ce dispositif est autorisée seulement aux
conditions suivantes : (1) il ne doit pas produire de brouillage et (2)
l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
Chapter 5
Appendix
99
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service
faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait
etre place loin des fenetres afin de Fournier un ecram de blindage
maximal. Si le matriel (ou son antenne d’emission) est installe a
l’exterieur, il doit faire l’objet d’une licence.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
Regulatory Compliance Statements
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15- to 5.25-GHz frequency
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the
potential for harmful interference to co-channel mobile satellite
systems. High power radar is allocated as the primary user of the
5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations
can cause interference with and/or damage to this device.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
This transmitter must not be collocated or operate in conjunction
with any other antenna or transmitter except the installed
Bluetooth transmitter.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this device
is intended to be operated indoors and away from windows
to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.
Chapter 5
Appendix
100
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Contact manufacturer for service.
(Si l’appareil est équipé d’une bande 2,4 G ou 5 G)
Des dispositifs de basse puissance, de type radio LAN
(périphériques de communication sans fil par radiofréquence
RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peutêtre intégrés dans votre appareil. Cette section est applicable
uniquement si ces dispositifs sont présents. Consultez l’étiquette
du système pour vérifiez la présence de dispositifs sans fil.
Les dispositifs sans fil qui peuvent être intégrés dans votre système
sont uniquement aptes pour une utilisation au Canada si l’étiquette
du système présente un nombre d’identification d’Industrie
Canada.
En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne
peut être utilisé qu’à l’intérieur en raison de son fonctionnement
dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie
Canada exige l’utilisation de ce produit à l’intérieur pour une
plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire
les éventuelles interférences nuisibles avec les systèmes mobiles
par satellite du même canal. Le radar de grande puissance est
considéré comme l’utilisateur principal des bandes de 5,25 à 5,35
GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer
des interférences avec ce périphérique et/ou l’endommager.
Regulatory Compliance Statements
Le gain d’antenne maximum autorisé avec ce périphérique est
de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des
fréquences de 5,25 à 5,35 GHz et de 5,725 à 5,85 GHz dans un
fonctionnement point à point.
La sortie de puissance du dispositif sans fil (ou des dispositifs) qui
peut être intégré dans votre système est bien inférieure aux limites
d’exposition de RF établies par Industrie Canada.
Ce transmetteur ne doit pas être colocalisé ni utilisé
conjointement à tout autre transmetteur ou antenne, à l’exception
du transmetteur Bluetooth installé.
Son utilisation est soumise aux deux conditions suivantes : 1) ce
dispositif ne peut pas provoquer d’interférences nuisibles et 2
2) ce dispositif doit accepter toute interférence reçue, y compris
les interférences qui peuvent provoquer des anomalies dans le
système.
Chapter 5
Appendix
101
Telecommunications per DOC notice
(for products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operation, and safety
requirements. The Department does not guarantee the equipment
will operate to the users’ satisfaction.
Before installing this equipment, users should make sure that
it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some
cases, the inside wiring associated with a single-line individual
service may be extended by means of a certified connector
assembly. The customer should be aware that compliance with
the above conditions may not prevent degradation of service in
some situations.
Afin de prévenir des interférences de radio au service
autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et
éloigné des fenêtres pour fournir une protection maximum.
Un équipement (ou son antenne de transmission) qui est
installé à l’extérieur est sujet à une autorisation.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Les dispositifs sans fil ne peuvent pas être réparés par
l’utilisateur. Ne les modifiez en aucune façon. La modification
d’un dispositif sans fil annulera votre autorisation à son
utilisation. Contactez le fabricant pour la réparation.
Users should make sure, for their own protection, that the
electrical ground connections of the power utility, telephone lines,
and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Regulatory Compliance Statements
To avoid electrical shock or equipment malfunction do not
attempt to make electrical ground connections by yourself.
Contact the appropriate inspection authority or an electrician,
as appropriate.
The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number
of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed 5.
Déclarations sur les télécommunications selon DOC
(pour des produits munis d’un modem homologué par
la IC)
L’étiquette d’Industrie Canada identifie un équipement autorisé.
Cette autorisation signifie que l’équipement satisfait certaines
exigences pour la sécurité, fonctionnement et protection des
réseaux téléphoniques. Le département ne garantie pas que
l’équipement fonctionne comme le désirerait l’utilisateur.
Avant d’installer l’équipement, les utilisateurs doivent s’assurer
que leur connexion aux installations de la compagnie de
télécommunication locale soit permise.
L’équipement doit être également installé selon une méthode
acceptable de connexion. Dans certains cas, l’installation
électrique associée à un service de ligne individuel peut être
Chapter 5
Appendix
102
rallongé par un connecteur homologué. Le client doit savoir que
la conformité aux conditions précédentes ne garantit pas un
fonctionnement parfait dans toutes les situations.
Les réparations de l’équipement homologué doivent être
effectuées dans les installations de maintenance canadiennes
autorisées par le fournisseur. Les réparations ou modifications
effectuées par l’utilisateur sur cet équipement, ou anomalies
de l’équipement, peuvent faire que la compagnie de
télécommunication demande la déconnexion de l’équipement.
Les utilisateurs doivent s’assurer, pour leur propre protection, que
les raccordements électriques à la terre, les lignes de téléphone
et l’infrastructure de la conduite d’eau, si il y en a, sont connectés
ensemble. Cette précaution peut être particulièrement importante
dans les zones rurales.
Afin d’éviter une électrocution ou le disfonctionnement
de l’équipement, n’essayez pas de faire vous-même les
raccordements électriques à la terre. Contactez l’autorité
inspectrice adéquate ou un électricien, selon il conviendra.
Le Numéro d’équivalence d’appel (REN) attribué à chaque
dispositif terminal fourni une indication du nombre maximum
de terminales qui peuvent être connectées à une interface
téléphonique. Le bout d’une interface peut contenir n’importe
quelle combinaison de dispositifs sujets uniquement à la
condition que le total des numéros d’équivalence d’appel de tous
les dispositifs ne dépasse pas 5.
Regulatory Compliance Statements
Brazil
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
Chapter 5
Appendix
103
European Directives
This Information Technology Equipment has been tested and
found to comply with the following European directives:
•• EMC Directive 2004/108/EC
•• Low Voltage Directive 2006/95/EC
•• R&TTE Directive 1999/5/EC
European Union
European Union CE Marking and Compliance Notices
Products intended for sale within the European Union are marked
with the Conformité Européene (CE) Marking, which indicates
compliance with the applicable Directives and European standards
and amendments identified below. This equipment also carries
the Class 2 identifier.
The following information is only applicable to systems labeled
.
with the CE mark
Manufacturer Information
Samsung Electronics Co., Ltd.
416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
Tel: +86-512-6253-8988
For the web or the phone number of Samsung Service Centre, see
the Warranty or contact the retailer where you purchased your
product.
Regulatory Compliance Statements
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4GHz/5GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
Chapter 5
Appendix
EU R&TTE Compliance Statements
Česky
[Czech]
Samsung tímto prohlašuje, že tento Notebook
PC je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Samsung erklærer herved, at
følgende udstyr Notebook PC overholder de
væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt Samsung, dass sich das Gerät
Notebook PC in Übereinstimmung mit den
grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Samsung seadme
Notebook PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
Hereby, Samsung, declares that this Notebook
PC is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente Samsung declara
que el Notebook PC cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
The low band 5.15 - 5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
104
Regulatory Compliance Statements
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ
Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Samsung déclare que l’appareil
Notebook PC est conforme aux exigences
essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Samsung dichiara che questo
Notebook PC è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Samsung deklarē, ka Notebook PC atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Šiuo Samsung deklaruoja, kad šis Notebook PC
Lietuvių
atitinka esminius reikalavimus ir kitas 1999/5/
[Lithuanian]
EB Direktyvos nuostatas.
Nederlands
[Dutch]
Malti
[Maltese]
Hierbij verklaart Samsung dat het toestel
Notebook PC in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Samsung, jiddikjara li dan
Notebook PC jikkonforma mal-ħtiāijiet
essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/EC.
Chapter 5
Appendix
105
Alulírott, Samsung nyilatkozom, hogy a
Magyar
Notebook PC megfelel a vonatkozó alapvetõ
[Hungarian] követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Polski
[Polish]
Niniejszym Samsung oświadcza, Ŝe Notebook
PC jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Samsung declara que este Notebook PC está
Português
conforme com os requisitos essenciais e outras
[Portuguese]
disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu
z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky
[Slovak]
Samsung týmto vyhlasuje, že Notebook PC
spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Samsung vakuuttaa täten että Notebook
PC tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Samsung att denna Notebook
PC står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/
EG.
Regulatory Compliance Statements
Íslenska
[Icelandic]
Hér með lýsir Samsung yfir því að Notebook PC
er í samræmi við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun 1999/5/EC.
Samsung erklærer herved at utstyret Notebook
Norsk
PC er i samsvar med de grunnleggende krav og
[Norwegian]
øvrige relevante krav i direktiv 1999/5/EF.
Türkiye
[Türkçe]
Bu belge ile, Samsung bu Notebook PC’nin
1999/5/EC Yönetmeliğinin temel gerekliliklerine
ve ilgili hükümlerine uygun olduğunu beyan
eder.
To view the EU Declaration of Conformity for this product (in
English only), go to: http://www.samsung.com/uk/support/
download/supportDownMain.do then search the model number
of the product.
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor.
Chapter 5
Appendix
106
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g
wireless LAN devices may not yet be harmonized in all
countries, 802.11b/802.11g products are designed for use
only in specific countries or regions, and are not allowed
to be operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible for ensuring
that the products are used only in the countries or regions
for which they were intended and for verifying that they
are configured with the correct selection of frequency and
channel for the country or region of use. Any deviation from
permissible settings and restrictions in the country or region
of use could be an infringement of local law and may be
punished as such.
Regulatory Compliance Statements
Chapter 5
Appendix
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
France
General
2.400 - 2.454 GHz (channels 1 to 7) for outdoor use.
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
The low band 5.15 - 5.35 GHz is for indoor use only.
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.4835 GHz for indoor and outdoor use.
For Reunion, Guyane:
Belgium
2.400 - 2.4835 GHz for indoor use.
The product may be used outdoors, but for outdoor transmissions
over a distance of 300m or more, a license from the BIPT is
required.
2.420 - 2.4835 GHz for outdoor use (channels 5 to 13)
This restriction should be indicated in the manual as follows:
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire
pour une distance de moins de 300m. Pour une distance
supérieure à 300m un enregistrement auprès de l’IBPT est requise.
Pour une utilisation publique à l’extérieur de bâtiments, une
licence de l’IBPT est requise. Pour les enregistrements et licences,
veuillez contacter l’IBPT.
The low band 5.15 - 5.35 GHz is for indoor use only.
107
Regulatory Compliance Statements
European Telecommunication Information
(for products fitted with EU-approved modems)
Marking by the symbol
indicates compliance of this equipment
to the Radio and Telecom Terminal Equipment Directive 1999/5/
EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
CTR 21 - Attachment requirements for pan-European approval for
connection to the analogue Public Switched Telephone Networks
(PSTNs) of TE (excluding TE supporting voice telephony services) in
which network addressing, if provided, is by means of Dual Tone
Multi-Frequency (DTMF) signaling.
Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of
the DTMF signaling is subject to regulatory requirements for
correct operation.
It is therefore strongly recommended that the equipment
is set to use DTMF signaling for access to public or private
emergency services. DTMF signaling also provides faster call
setup.
Chapter 5
Appendix
108
This equipment has been approved to Council Decision 98/482/
EEC - “CTR 21” for Pan-European single terminal connection to the
Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself,
give an unconditional assurance of successful operation on every
PSTN termination point. In the event of problems, you should
contact manufacturer Technical Support.
WEEE Symbol Information
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
Chapter 5
Appendix
Pb
109
Correct disposal of batteries in this product
(Applicable in the European Union and other European
countries with separate collection systems)
(Applicable in the European Union and other European
countries with separate battery return systems.)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
To protect natural resources and to promote material re-use, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
TCO Certified (for corresponding models only)
Congratulations!
This product is TCO Certified for Usability and the
Environment.
The product you have just purchased carries the
TCO Certified label. This means that your
computer is designed, manufactured and tested
according to some of the strictest performance
and environmental criteria in the world. That makes for a high
performance product designed with the user in focus and one
that also minimizes the impact on the climate and our natural
environment.
TCO Certified is a third party verified program, where every
product model is tested by an accredited impartial test laboratory.
All criteria have been developed by TCO Development in
collaboration with scientists, product experts, users as well as
manufacturers all over the world.
Here are some of the features offered with this product:
Usability – Designed for You
•• Good visual ergonomics and image quality, ensuring
top performance and reduced risk of eye strain. Several
requirements within the area of luminance, contrast, resolution
and color
•• Designed with the option to connect an external display,
keyboard and mouse (recommended when working with a
notebook or netbook for longer periods)
Chapter 5
Appendix
110
•• Ergonomic keyboard design – for ease of use and good
readability
•• Fully tested according to rigorous safety standards
•• Low Electric and Magnetic field emissions. Low acoustic noise
levels
Environment– Designed for the Planet
•• Brand demonstrates corporate social responsibility and has
a certified environmental management system (EMAS or ISO
14001)
•• Very low energy consumption both in idle- and standby mode,
reducing climate impact
•• Restrictions on hazardous materials: chlorinated and
brominated flame retardants, plasticizers, plastics and heavy
metals such as cadmium, mercury, lead and hexavalent
chromium (mercury ban and limits on hazardous flame
retardants go beyond RoHS compliance)
•• Both product and product packaging are designed for
recycling
•• The brand company offers take-back options
For more information, please visit
www.tcodevelopment.com
TCO Certified – Technology for You and the Planet
TCOF1190 TCO Document Version 2.0
Product Specifications
Chapter 5
Appendix
111
The system specifications may differ depending on the derived
models.
For detailed system specifications, refer to the product catalogue.
CPU
Intel ATOM™ Processor
Main Memory
Memory type: DDR3 SODIMM
Main Chipset
Intel NM10 Express
Storage Device
(Optional)
7mmH/9.5mmH SATA HDD, SSD
Intel GMA 3150 (Internal)
Graphics (Optional)
Intel GMA 3600 (Internal)
Intel GMA 3650 (Internal)
Operating
Environment
Temperature: -5~40°C for storage,
10~3°C when operating
Humidity: 5~90% for storage,
20~80% when operating
AC/DC Rating
(Optional)
Input) 100-240VAC, 50/60Hz,
PC Rating (Optional)
19VDC 2.1A (40W)
Output) 19VDC 2.1A
•• Optional components may not be provided or different
components may be provided depending on the computer
model.
•• This product has a built-in mono speaker.
•• The system specifications are subject to change without
notice.
•• The hard disk drive capacity of a computer in which
Samsung Recovery Solution is installed, is represented as
smaller than the product specification.
Product Specifications
Registered Trademarks
Samsung is a registered trademark of Samsung Co., Ltd.
Intel, ATOM/Pentium/Celeron are registered trademarks of the
Intel Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the
Microsoft Corporation.
All other product or company names mentioned herein are
registered trademarks of their respective companies.
Chapter 5
Appendix
112
ENERGY STAR® Partner
As an ENERGY STAR® Partner, SAMSUNG has
determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
Glossary
Chapter 5
Appendix
113
The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help.
Backup
DHCP (Dynamic Host Configuration Protocol)
A way to save the current data to restore it later if necessary.
A backup is a way to restore computer data when the data or
computer is damaged.
This refers to automatically allocating IP addresses to the users on
the network by the network administrators.
Chargeable USB
An application interface developed to enable Windows application
programs to access hardware devices at a very high speed. Since
the operating speed of graphics, memory and sound cards must be
very fast to provide high quality video and sound for games, Direct
X enables faster control and interaction between applications and
hardware devices. By using Direct X, the multimedia performance
of Windows has been hugely improved.
This program enables supplying power to a specific USB port when
the system is in power saving mode, hibernation mode or off.
Client
This refers to a computer that uses a shared network resource
provided by a server.
DDR SDRAM
(Double Data Rate Synchronous Dynamic Random Access Memory)
DRAM is a memory type whose cells consist of a capacitor and
transistor manufactured at a low price. SDRAM is a memory type
whose performance has been improved by synchronizing the clock
with the external CPU clock. DDR SDRAM is a memory type whose
performance has been improved by doubling the operating speed
of the SDRAM and is widely used nowadays. This computer uses
DDR SDRAM.
Device Manager
An administrative tool used to manage computer devices. You can
add or remove hardware or update a device driver using the Device
Manager.
Direct X
Driver
Software that interacts between the hardware and the operating
system. An operating system knows the hardware information
and controls the hardware. In general, a driver is supplied with the
corresponding hardware device.
D-sub (D-subminiature)
This is the cable connecting a general CRT monitor and the
computer. Analog video is output through this cable.
Glossary
Chapter 5
Appendix
114
DVD (Digital Versatile Disk)
LAN (Local Area Network)
DVD was developed to replace CD (compact disk). Although the
shape and size of the disc are the same as that of a CD, the capacity
of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD
video is digital unlike VHS (analog) video and supports MPEG2
compression and digital audio. To play a DVD, a DVD drive is
required.
A communications network connecting computers, printers and
other devices within a local area such as within a building. A LAN
enables all connected devices to interact with other devices on the
network. The current LAN uses the Ethernet media access control
method developed in the early 1980s. To connect to an Ethernet, a
network card called a LAN card, Ethernet card or network interface
card is required. To exchange data between computers, a protocol
is required besides the hardware equipment. Windows Vista uses
TCP/IP as the default protocol.
Firewall
A security system used to protect an internal network or intranet
from external networks through an authentication procedure.
HDMI
This is a digital video / audio interface specification that transmits
video and audio signals over a single cable.
Hibernation Mode
A power mode that saves all data in memory to the hard disk and
turns the CPU and hard disk off. When canceling Hibernation Mode,
all application programs that were running are restored to their last
state.
LCD (Liquid Crystal Display)
There are Passive Matrix and Active Matrix LCD types. This
computer uses the Active Matrix type LCD called a TFT LCD. Since
an LCD is implemented by transistors instead of a cathode-ray tube
unlike a CRT, its size can be slim. And because it does not blink, it
reduces eye strain.
MMC (MultiMedia Card) card
This is an external-type flash memory used for mobile devices such
as mobile phones or digital cameras.
Icon
Network
This refers to a small image that represents a file that users can use.
A group of computers and devices, such as printers and scanners,
connected by a communications link. A network can be either
small or large and can be connected permanently through cables
or temporarily through telephone lines or wireless links. The
biggest network is the Internet, a worldwide network.
Glossary
Chapter 5
Appendix
115
Network Administrator
Quick Launch
A user who plans, configures and manages network operations.
Sometimes, a network administrator is called a system
administrator.
This refers to a toolbar that can be configured so that you can
launch a program such as Internet Explorer or display the Windows
Desktop with one click. You can add any icon to the quick launch
area of the Taskbar and launch frequently used program by clicking
that icon.
Notification Area
This refers to the right area of the Taskbar including program icons
such as the volume control, the power options and the time.
Partition
This refers to the act or practice of dividing the storage space of
a hard disk drive into separate data areas known as partitions. If a
100GB hard disk drive is partitioned into 2 x 50GB partitions, the
hard disk drive can be used as if there are 2 hard disk drives.
PCMCIA (Personal Computer Memory Card International
Association) card
This is an extended card slot specification for mobile computers
such as a notebook computer. Not only a memory, device but also
most peripherals such as hard disk drives, LAN cards, etc. can be
connected to this card slot.
Protocol
A protocol is a set of rules used by computers to communicate with
each other across a network. A protocol is a convention or standard
that controls or enables the connection, communication, and
data transfer between computing endpoints. It defines the data
transmission procedures and the transmission medium for more
efficient network functions.
SD (Secure Digital) card
An SD card is a flash (non-volatile) memory card developed for
mobile devices by improving on the MMC card. Although an MMC
card can be used in an SD card slot, an SD card is not recognized
when inserted into an MMC card.
SDHC (Secure Digital High Capacity) card
This is the extension of the SD card that supports over 2GB bytes.
Server
In general, a server refers to a computer that provides shared
resources for network users.
Share
This refers to setting a resource of a computer such as a folder or
printer so that other users can also use it.
Shared Folder
A folder that can be used by other users on the network.
Glossary
Sleep Mode
A power mode that enables computers to save power consumption
when they are not being used. When a computer is in Sleep Mode,
the data on the computer memory is not saved to the hard disk. If
the power is turned off, the data in memory will be lost.
System File
System Files refer to files that are read and used by the Windows
operating system. In general, system files must not be deleted or
moved.
TCP/IPv4
This is a 4 byte (32 bit) address system separated into each byte
(8 bits) by a dot and each byte is represented as a decimal number.
USB (Universal Serial Bus)
This refers to a serial interface standard developed to replace the
conventional interface standards such as Serial and PS/2. While USB
1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports
a data rate that is 40 times (480Mpbs) faster than that of USB 1.1.
The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore
USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd
HDD and CDRW that require a high data rate.
Windows Media Player
A multimedia program included with Windows. Using this
program, you can play a media file, create an audio CD, listen to a
radio broadcast, search and manage media files, and copy files to a
portable device, etc.
Chapter 5
Appendix
116
Index
Chapter 5
Appendix
A
AP
M
55
B
68
Multi Card Slot
45
70
O
BIOS Setup
62
Overview
Booting Priority
67
C
CD Drive
43
Charge
70
Click
38
Product Specifications
111
R
S
Drag
38
Safety Precautions
LCD Brightness
59
51
7
Samsung Recovery Solution
77
Scroll
40
Security Slot
75
Shortcut Key
34
Status Indicators
26
Supervisor Password
64
37
U
65
V
Volume Control
64
38
L
25
Password
Double-Click
Touchpad
User Password
P
Recorder
D
T
Memory
Battery
117
51
W
Wired Network
52
Wireless Network
55