AU EN
Quick Start Guide
Accessory Camera Unit
MBP28BU
1
Getting started
2
Help
3
General Information
This Quick Start Guide provides all the information
you need to get started. If you need more detailed
instructions, please go to www.motorola.com to
download a PDF of the main product's User's
Guide.
Please consider the environment before printing.
Box Contents
$8(1
$FFHVVRU\&DPHUD8QLW
0%3%8
4XLFN6WDUW*XLGH
*HWWLQJVWDUWHG
+HOS
*HQHUDO,QIRUPDWLRQ
7KLV4XLFN6WDUW*XLGHSURYLGHVDOOWKHLQIRUPDWLRQ
\RXQHHGWRJHWVWDUWHG,I\RXQHHGPRUHGHWDLOHG
LQVWUXFWLRQVSOHDVHJRWRZZZPRWRURODFRPWR
GRZQORDGD3')RIWKHPDLQSURGXFW
V8VHU
V
*XLGH
3OHDVHFRQVLGHUWKHHQYLURQPHQWEHIRUHSULQWLQJ
Camera Unit
Power adapter
Quick Start Guide
The accessory camera unit can be paired as an additional camera unit of Motorola model MBP28 or
MBP701.
IMPORTANT
Accessory camera unit only – requires a MBP28 parent unit or a MBP701 digital photo frame to operate.
1 Getting started
Step 1. Connecting the accessory camera
unit
DC SOCKET
DC PLUG
1. Insert the DC plug of the power adapter with the
smaller DC plug into the DC socket in the side of
the camera unit, as shown.
NOTE
Only use the enclosed power adapter (6V DC /
600mA).
2. Connect the other end of the power adapter to a
suitable mains socket or power outlet.
AU EN
Step 2. Registration (Pairing)
To re-register your camera unit, or register a new
camera unit, follow the procedure below:
1. Press the 1 button of the parent unit to access
the main menu.
2. Press the + button or - button to select
REGISTER.
3. Press the 1 button to confirm. The parent unit
will display Registration mode, and then display
Registering... which indicates it has entered the
registration mode.
4. Press and hold the > button of the camera unit
until it emits a beep tone.
5. There will be a beep and the display will show
Registered when the registration is successfully
completed, and the camera unit will be assigned a
baby unit number, which can be checked from the
parent unit.
IMPORTANT
Use only the power adapter supplied with the product.
2 Help
For more solutions, see the full Help section in the User's Guide.
If the Camera Unit has lost link with the Parent Unit
• Check the electrical power and check whether the power adapter on the Camera Unit is connected firmly.
• If the Camera Unit is too far away, it may be going out of range, so move the Camera Unit closer to the
Parent Unit.
• Reset the units by disconnecting them from the battery and electrical power. Wait about 15 seconds before
reconnecting. Allow up to one minute for the Camera Unit and the Parent Unit to synchronize.
• See Step 2. Registration (Pairing), if there is a need to re-register the units.
3 General Information
If your product is not working properly...
1. Read this Quick Start Guide or the User’s Guide.
2. Contact Customer Service:
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this
product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
respective owners.
© 2012 Motorola Mobility, Inc. All rights reserved.
Printed in China
Version 2.0