Samsung Samsung Notebook SERIES 3 350V 15,6” User Manual (Windows 8)

User Guide
Contents
Before You Start
Safety Precautions
Proper Posture During Computer Use
Overview
Turning the Computer On and Off
79
What is Microsoft Windows 8?
Screen At a Glance
Using the Charms
Using Apps
Windows Hot Key Function
Chapter 3. Using the computer
42
45
49
50
52
56
58
59
62
64
73
77
Keyboard
Touchpad
CD Drive (ODD, Optional)
Multi Card Slot (Optional)
Connecting an External Display Device
Adjusting the Volume
LCD Brightness Control
Wired Network
Wireless Network (Optional)
Using the TPM Security Device (Optional)
Using the Multimedia App (Optional)
Samsung Software Update
Diagnosing the Computer Status and
Troubleshooting
Using the Security Slot (Optional)
BIOS Setup
Setting a Boot Password
Changing the Boot Priority
Upgrading Memory
Battery
Chapter 5. Troubleshooting
95
102
105
1
Chapter 4. Settings and Upgrade
81
83
86
87
89
Chapter 2. Using Windows 8
32
33
35
37
40
78
Chapter 1. Getting Started
3
6
21
24
29
Chapter 1
Getting Started
Recovering/Backing up the Computer (Optional)
Reinstalling Windows (Optional)
Q&A
Chapter 6. Appendix
111
113
115
131
132
133
135
139
Important Safety Information
Replacement Parts and Accessories
Regulatory Compliance Statements
WEEE Symbol Information
Samsung Packaging Take-Back Program
Product Specifications
Glossary
Index
Chapter 1.
Getting Started
Before You Start
3
Safety Precautions
6
Proper Posture During Computer Use
21
Overview
24
Turning the Computer On and Off
29
Before You Start
Before reading the User Guide, first check the following
information.
•• Optional items, some devices and software referred to in
the User Guide may not be provided and/or changed by
upgrade.
Note that the computer environment referred in the User
Guide may not be the same as your own environment.
•• T he pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series and may differ from the actual appearance of the
product.
•• This guide decribes procedures for using both the mouse
and the touchpad.
•• This manual has been written for the Windows 8 operating
system. The descriptions and figures may differ depending
on the installed operating system.
•• The User guide supplied with this computer may vary
depending on your model.
Chapter 1
Getting Started
Using the software
•• From the Start Screen, right-click any area and select All
Apps
in the bottom right corner. Then, click a desired
program. Or you can simply launch Quick Starter to do
the same.
•• You can install Quick Starter from SW Update.
3
Before You Start
Chapter 1
Getting Started
Safety Precaution Notations
Icon
4
Copyright
Notation
Description
Warning
Failure to follow instructions marked with
this symbol, may cause personal injury
and or fatality.
Caution
Failure to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
© 2012 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your data
to prevent any such data loss.
Text Notations
OS and Software Support
Icon
Notation
Description
Caution
Content included in this section includes
information required about the function.
Note
Content included in this section includes
helpful information to use the function.
If you change the product’s factory OS (Operating System) to
another OS or if you install software which is not supported by the
product’s original factory OS, you will not receive any technical
support, product exchange or refund. And a fee will be charged
when requesting a service.
Please use your computer with the original factory OS. If you
install an OS other than the factory OS, data may be deleted or the
computer may not start.
Before You Start
About the Product Capacity Representation
Standard
About the capacity representation of the storage
The capacity of the storage device (HDD, SSD) of the manufacturer
is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage
device capacity assuming that 1KB=1,024 Bytes, and therefore the
capacity representation of the HDD in Windows is smaller than the
actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB,
80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB)
In addition, the capacity representation in Windows may be even
smaller because some programs such as Recovery may reside in a
hidden area of the HDD.
Chapter 1
Getting Started
5
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual
capacity of memory.
This is because BIOS or a video adapter uses a portion of memory
or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report
the capacity as 1,022MB or less)
Safety Precautions
For your security and to prevent damage, please read the
following safety instructions carefully.
Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Installation Related
Do not install the product in places exposed
to humidity such as a bathrooms.
There is a danger of electric shock. Use the
product within the operating conditions
specified in the Manufacturers User Guide.
Keep the plastic bags out of the reach of
children.
There is a danger of suffocation.
Keep a distance of 15cm or more between
the computer and the wall and do not place
any objects between them.
Chapter 1
Getting Started
6
Do not install the computer on a slant or a
place prone to vibrations, or avoid using the
computer in that location for a long time.
This increases the risk that a malfunction or
damage to the product will occur.
Be careful that people are not exposed to
the computer’s ventilator, adapter, etc., as
they generate heat over a long period of
time when your PC is powered on.
Exposing a part of your body close to the heat
from the vent or AC adapter for long periods of
time may cause a burn.
Avoid blocking the vent at the bottom or
side of the computer when using it on a bed
or cushion.
If the vent is blocked, there is a danger of
damaging the computer or overheating the
inside of the computer.
This may increase the internal temperature of
the computer and may cause an injury.
Ver 3.2
Safety Precautions
Chapter 1
Getting Started
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Power Related
The power plug and wall outlet figures may differ
depending on the country specifications and the product
model.
Do not touch the main plug or power cord
with wet hands.
G
7
If the power cord or power outlet makes a
noise, disconnect the power cord from the
wall outlet and contact a service center.
There is a danger of electric shock or fire
hazard.
Do not use a damaged or loose main plug or
power cord or power outlet.
There is a danger of electric shock or fire
hazard.
Plug the power cord firmly into the power
outlet and AC adapter.
Failure to do so may cause fire hazard.
There is a danger of electric shock.
Do not exceed the standard capacity
(voltage/current) of a multiplug or power
outlet extension when using it for the
product.
There is a danger of electric shock or fire
hazard.
Do not unplug the power cord by pulling
the cable only.
If the cord is damaged, it may cause electric
shock.
Do not bend the power cord excessively or
do not place a heavy object over the power
cord. It is especially important to keep the
power cord out of reach of infants and pets.
If the cord is damaged, it may cause electric
shock or fire.
Safety Precautions
Warning
Chapter 1
Getting Started
8
AC Adapter Usage Precautions
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Connect the power cord to an outlet or
multiple power plug (extended cable) with
a ground terminal.
Failure to do so may result in electric shock.
When the power supply is ungrounded, the
current may leak resulting in electric shock.
If water or another substance enters
the power input jack, AC adapter or the
computer, disconnect the power cord and
contact the service center.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Damage to the device within the computer
may cause electric shock or fire hazard.
Keep the power cord or outlet clean so that
they are not covered with dust.
Failure to do so may result in fire.
Connect the power cord to the AC adapter
firmly.
Otherwise, there is a danger of fire due to an
incomplete contact.
Use only the AC adapter supplied with the
product.
Using another adapter may cause the screen to
flicker.
Do not place heavy objects or step onto
the power cord or AC adapter to avoid
damaging the power cord or AC adapter.
If the cord is damaged, there is a danger of
electric shock or fire.
Unplug the wall-mount AC adapter (adapter
and plug intergrated type) from the wall
outlet while holding the body and pulling it
in the direction of the arrow.
If you unplug the adapter by holding and
pulling the cable, the adapter may be damaged
and an electric shock, explosive sound or spark
may occur as a result.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Battery Usage Related
Please charge the battery fully before using the
computer for the first time.
Keep the battery out of the reach of infants
and pets, as they could put the battery into
their mouths.
There is a danger of electric shock or choking.
Use an authorized battery and AC adapter
only.
Please use an authorized battery and adapter
approved by Samsung Electronics.
Unauthorized batteries and adapters may not
meet the proper safety requirements and may
cause problems or malfunctions and result in
an explosion or fire.
Chapter 1
Getting Started
9
Do not use the computer in a badly
ventilated location such as on bedding, on a
pillow or cushion, etc, and do not use it in a
location such as room with floor heating as
it may cause the computer to overheat.
Take care that the computer vents (on the side
or the bottom) are not blocked especially in
these environments. If the vents are blocked,
the computer may overheat and it may cause a
computer problem, or even an explosion.
Do not use the computer in a humid
location such as a bathroom or sauna.
Please use the computer within the
recommended temperature and humidity
range (10~35ºC, 20~80% RH).
Do not close the LCD panel and put the
computer into your bag to move it when it
is still turned on.
If you put the computer into your bag without
turning it off, the computer may overheat and
there is a danger of fire. Shut the computer
down properly before moving it.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Chapter 1
Getting Started
10
Cutting the power to the internal battery
(for corresponding models only.)
Never heat the product(or battery) or put
the product(or battery) into a fire. Do not
put or use the product(or battery) in a hot
location such as a sauna, inside a vehicle
exposed to the heat, and so on.
There is a danger of an explosion or fire.
Take care not to allow metal objects such as
a key or clip to touch the battery terminal
(metal parts).
If a metal object touches the battery terminals,
it may cause excessive current flow and it may
damage the battery, or result in a fire.
If liquid leaks out of the product(or battery)
or there is a funny smell coming from
the product(or battery), remove the the
product(or battery) the computer and
contact a service center.
There is a danger of an explosion or fire.
To use the computer safely, replace a dead
battery with a new, authorized battery.
•• For products with built-in batteries, customers cannot remove
the battery.
•• In the case of flooding, lightning or explosions, you can cut
the battery power by inserting an object such as a paper clip
into the [Emergency Hole] at the bottom of the computer.
•• Disconnect the AC adapter and insert an object such as a
paper clip into the hole at the bottom of the computer to cut
the battery power.
In the case of flooding, lightning or explosions, cut
the battery power, do not reconnect the AC adapter,
and immediately contact Samsung Electronics so that
the appropriate countermeasures can be taken.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
•• Thereafter, if you connect the AC adapter, the battery power
will be supplied again.
•• Do not cut the battery power under normal
conditions.
•• This may result in data loss or a product
malfunction.
The location of the Emergency Hole may differ depending
on the model.
Chapter 1
Getting Started
11
Usage Related
Disconnect all cables connected to the
computer before cleaning it. If your
notebook is external & removable battery
type, remove the external battery.
There is a danger of electric shock or damage
to the product.
Do not connect a phone line connected to a
digital phone to the modem.
There is a danger of a electric shock, fire or
damage to the product.
Do not place any container filled with water or
chemicals over or near the computer.
If water or chemicals enter the computer, this
may cause fire or electric shock.
If the computer is broken or dropped,
disconnect the power cord and contact a
service center for a safety check.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Using a broken computer may cause electric
shock or fire hazard.
Safety Precautions
Warning
Chapter 1
Getting Started
12
Upgrade Related
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Avoid direct sunlight when the computer
is in an air-tight location such as inside a
vehicle.
There is a danger of a fire hazard. The computer
may overheat and also present opportunity to
thieves.
Do not use your computer for long
periods of time while any part of your
body is making direct contact with it. The
temperature of the product may increase
during normal operation.
This may result in harming or burning your skin.
Never disassemble the power supply or AC
adapter.
There is a danger of electric shock.
When removing the RTC (Real Time Clock)
battery, keep it out of the reach of children
as they could touch and/or swallow it.
There is a danger of choking. If a child has
swallowed it, contact a doctor immediately.
Use only authorized parts (multiplug, battery and memory) and never
disassemble parts.
There is a danger of damaging the product,
electric shock or fire hazard.
Shut down the computer and disconnect
all cables before disassembling the
computer. If there is a modem, disconnect
the phone line. If your notebook is external
& removable battery type, remove the
external battery.
Failure to do so, may cause electric shock.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Security and Movement Related
Follow the instructions for the relevant
location (e.g. airplane, hospital, etc.) when
using a wireless communication device
(wireless LAN, Bluetooth, etc.).
Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields include airport walk-through devices and security wands.
The airport security devices that check carry-on luggage, such as conveyor belts, use
x-rays instead of magnetism and will not
damage a drive.
Chapter 1
Getting Started
When carrying the notebook computer
with other items, such as the adapter,
mouse, books etc, take care not to press
anything against the notebook computer.
If a heavy object is pressed against the
notebook computer, a white spot or stain may
appear on the LCD. Therefore, take care not to
apply any pressure to the notebook.
In this case, place the notebook computer in
a separate compartment away from the other
objects.
13
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Chapter 1
Getting Started
14
Battery Usage Related
Dispose of worn-out batteries properly.
•• There is a danger of fire or explosion.
Installation Related
Do not block the ports (holes), vents, etc. of the product and
do not insert objects.
Damage to a component within the computer may cause electric
shock or fire.
When using the computer with it lying on its side, place it so
that the vents face upwards.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
Do not place a heavy object over the product.
This may cause a problem with the computer. In addition, the
object may fall and cause injury, or damage the computer.
•• The battery disposal method may differ depending on
your country and region. Dispose of the used battery in an
appropriate way.
Do not throw or disassemble the battery and do not put it
into water.
This may cause an injury, fire or explosion.
Use only a battery authorized by Samsung Electronics.
Failure to do so may cause an explosion.
Avoid contact with metal objects such as car keys or clips
when keeping or carrying a battery.
Contact with a metal may cause excessive current and a high
temperature and may damage the battery or cause a fire.
Charge the battery according to the instructions in the manual.
Failure to do so, may cause an explosion or fire from damage to
the product.
Do not heat the product(or battery) or expose it to heat (e.g.
inside a vehicle during the summer).
There is a danger of explosion or fire.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Usage Related
Do not place a candle, light cigar, etc. over or on the product.
There is a danger of fire.
Use a wall outlet or multi-plug with a grounding part.
Chapter 1
Getting Started
15
Connect only permitted devices to the connectors or ports
of the computer.
Failure to do so, may cause electric shock and fire.
Close the LCD panel only after checking if the notebook
computer is turned off.
The temperature may rise and it may cause overheating and
deformation of the product.
Do not press the Eject Button while the CD-ROM drive is in
operation.
Failure to do so may cause electric shock hazard.
You might lose data and the disk might be suddenly ejected and
could cause an injury.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Take care not to drop the product while using it.
Authorized Samsung Repair Centers will carry out safety checks
after a repair. Using a repaired product without testing it for
safety may cause an electric shock or fire.
This may cause personal injury or loss of data.
Do not touch the antenna with electricity facility such as the
power outlet.
In case of lightning, immediately turn the system off,
disconnect the power cord from the wall outlet and phone
line from modem. Do not use a modem or phone.
There is a danger of electric shock.
There is a danger of electric shock or fire.
Failure to do so, may cause damage to the product.
Do not use your computer and AC-Adapter on your lap or
soft surfaces.
If the computer temperature increases, there is a danger of
burning yourself.
When handling computer parts, follow the instructions on
the manual supplied with the parts.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Chapter 1
Getting Started
16
Do not place your face close to the Optical Disk Drive tray
when it is operating.
There is a danger of injury due to an abrupt ejection.
Check CDs for cracks and damage prior to use.
If the computer emits smoke, or there is a burning smell,
disconnect the power plug from the wall outlet and contact
a service center immediately. If your notebook is external &
removable battery type, remove the external battery.
There is a danger of fire.
Do not use a damaged or modified CD.
There is a danger of damaging the product or personal injury.
Do not insert your fingers into the PC Card Slot.
There is a danger of injury or electric shock.
Use recommended computer cleansing solution when
cleaning the product and only use the computer when it is
completely dried.
Failure to do so may cause electric shock or fire.
Emergency disk eject method using paperclip should not
be used while the disk is in motion. Make sure to use the
emergency disk eject method only when the Optical Disk
Drive has stopped.
There is a danger of injury.
It may damage the disc and cause disorder of device and injury of
user.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Upgrade Related
Take care when touching the product or parts.
The device may be damaged or you may be injured.
Take care not to throw or drop a computer part or device.
Chapter 1
Getting Started
Security and Movement Related
When moving the product, turn the power off and separate
all connected cables first.
The product might be damaged or users may trip over the cables.
For long periods of not using the notebook computer,
discharge the battery and preserve as it is detached.
(For external & removable battery type)
The battery will be preserved at its best condition.
This may cause injury or damage to the product.
Do not operate or watch the computer while driving a
vehicle.
Make sure to close the computer cover before connecting
the power after a reassembly.
There is a danger of a traffic accident. Please concentrate on
driving.
There is a danger of electric shock if your body touches an
internal part.
Use parts authorized by Samsung Electronics only.
Failure to do so, may cause fire or damage the product.
Never disassemble or repair the product by yourself.
There is a danger of electric shock or fire.
To connect a device that is not manufactured or authorized
by Samsung Electronics, enquire at your service center
before connecting the device.
There is a danger of damaging the product.
17
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Cautions on Preventing Data Loss
(Hard Disk Management)
Take care not to damage the data on a hard disk drive.
•• A hard disk drive is so sensitive to external impact that an
external impact may cause loss of data on the surface of the
disk.
•• Take extra care, because moving the computer or an impact
on the computer when it is turned on may damage the data of
the hard disk drive.
•• The company is not liable for any loss of data on the hard disk
drive.
Chapter 1
Getting Started
18
Causes that may damage the data of a hard disk drive and
the hard disk drive itself.
•• The data may be lost when an external impact is applied to the
disk while disassembling or assembling the computer.
•• The data may be lost when the computer is turned off or reset
by a power failure while the hard disk drive is operating.
•• The data may be lost and irrecoverable due to a computer virus
infection.
•• The data may be lost if the power is turned off while running a
program.
•• Sudden impact or movement to the computer while the hard
disk drive is operating, may cause files to be corrupted or bad
sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive,
please backup your data frequently.
Safety Precautions
Using the power supply in an airplane
Since the power outlet type differs depending on the type of
airplane, connect the power appropriately.
Since the representative figures of the power plug and
the auto adapter are used, they may differ from the actual
parts.
Chapter 1
Getting Started
19
When using the AC power plug
Connect the power plug pins perpendicular into the center of the
power outlet.
•• If the plug pins are not inserted into the center of the holes, the
plug pins are only inserted up to half their length. In this case,
reconnect the power plug.
•• You have to insert the power plug into the outlet when the
power indicator (LED) of the power outlet is lit green. If the
power is connected properly, the power indicator (LED)
remains green.
Otherwise, the power indicator (LED) is turned off. In this case,
unplug the power, check if the power indicator (LED) is green,
and then reconnect the power plug.
Power Indicator (LED)
Center
Holes
220V Power Plug
110V Power Plug
Good Example
Wrong Example
Safety Precautions
Chapter 1
Getting Started
When using the auto adapter
When the cigar socket is provided, you have to use the auto
adapter (optional). Insert the cigar plug of the auto adapter into
the cigar socket and connect the DC plug of the auto adapter to
the power input port of the computer.
Auto Adapter
DC Plug
Cigar Plug
In-flight Cigar Socket
When using the Airplane Charging Converter
Depending on the airplane, you have to use the auto adapter
and charging converter. Connect the airplane charging converter
(optional) to the auto adapter (optional) and then insert the
airplane power input jack into the power outlet.
Charging
Converter
Connect the airplane power
input jack to the power
outlet of the airplane.
this end to
1 Connect
the auto adapter.
2
20
Proper Posture During Computer Use
Chapter 1
Getting Started
21
Maintaining a proper posture during computer use is very
important to prevent physical harm.
•• Do not use the computer while you are lying down, but only
while you are sitting down.
The following instructions are about maintaining a proper posture
during computer use developed through human engineering.
Please read and follow them carefully when using the computer.
•• Do not use the computer on your lap. If the computer
temperature increases, there is a danger of burning yourself.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from
repeated operations may increase and serious physical harm may
be caused.
•• Use a chair with a comfortable back.
•• The instructions in this manual have been prepared so that
they can be applied within the coverage of general users.
•• If the user is not included in the coverage, the
recommendation is to be applied according to the user’s
needs.
Proper Posture
Adjust the heights of desks and chairs appropriate to your
height.
The heights are to be adjusted so that your arm forms a right
angle when you place your hand over the keyboard while sitting
down on a chair.
Adjust the height of chair so that your heel is comfortably placed
on the floor.
•• Work while keeping your waist straight.
•• Keep the center of your leg weight not on the chair but on
your feet when you are sitting on a chair.
•• To use the computer while talking over the telephone, use a
headset. Using the computer with the phone on your shoulder
is bad for posture.
•• Keep frequently used items within a comfortable work range
(where you can reach them with your hands).
Proper Posture During Computer Use
Chapter 1
Getting Started
Eye Position
Hand Position
Keep the monitor or LCD away from your eyes by at least
50cm.
Keep your arm at a right angle as shown by the figure.
•• Adjust the height of the monitor and the LCD screen so that its
top height is equal to or lower than your eyes.
•• Avoid setting the monitor and LCD excessively bright.
•• Keep the monitor and LCD screen clean.
•• If you wear glasses, clean them before using the computer.
•• When entering contents printed on a paper into the computer,
use a static paper holder so that the height of the paper is
almost equal to that of the monitor.
22
•• Keep the line from your elbow to your hand straight.
•• Do not place your palm over the keyboard while typing.
•• Do not hold the mouse with excessive force.
•• Do not press the keyboard, touchpad or mouse with excessive
force.
•• It is recommended connecting an external keyboard and
mouse when using the computer for long periods of time.
Proper Posture During Computer Use
Chapter 1
Getting Started
23
Volume Control (Headphones and Speakers)
Use Time (Break Time)
Check your volume first to listen to music.
•• Take a break for 10 minutes or more after a 50-minute period
when working for more than one hour.
Illumination
•• Do not use the computer in dark locations. The illumination
level for computer use must be as bright so for reading a book.
Check your
volume!
•• Check if the volume is too loud before using headphones.
•• It is not recommended using headphones for long periods of
time.
•• Any deviation from the equalizer default setting could cause
hearing impairment.
•• The default setting can be changed through software and
driver updates without your intervention. Please check the
equalizer default setting before first usage.
•• Indirect illumination is recommended. Use a curtain to prevent
reflection on the LCD screen.
Operation Condition
•• Do not use the computer in hot and humid locations.
•• Use the computer within the allowed temperature and
humidity range specified in the User Guide.
Overview
Chapter 1
Getting Started
24
Front View
•• The pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series. Therefore the colors and appearance of the pictures
may differ from the actual appearance of the product
depending on the model.
•• The items marked as optional may not be provided or may
be provided in different locations.
1
2
3
4
5
6
7
8
10
9
1 Camera (Optional)
2 Microphone
3
Using this camera, you can take still
pictures and record video.
You can take a picture or make a movie
using the Charms > Start > Camera.
You can use the built-in microphone.
Camera operating This indicates the camera operating
indicator (Optional) status.
4 LCD
The screen images are displayed here.
5 Speaker
A device used to generate sound.
6 Power Button
Turns the computer on and off.
7 Keyboard
A device to enter data by pressing the
keys.
Touchpad/
8
Touchpad Buttons
The touchpad and touchpad buttons
provide functions similar to the mouse
ball and buttons.
9 Multi Card Slot
A card slot supports multi cards.
10 Status Indicators
Shows the operating status of the
computer. The corresponding operating
LED is lit when the corresponding
function operates.
Overview
Chapter 1
Getting Started
25
Status Indicators
1 HDD/ODD
This turns when either the HDD or ODD is
being accessed.
2 Wireless LAN
This turns on when the wireless LAN is
operating.
This shows the power source and the
battery charge status.
reen: When the battery is fully charged
G
or the battery is not installed.
1
2
3
4
3 Charge Status
Orange: When the battery is being
charged.
Off: When the computer is running on
battery power without being connected
to AC adapter.
This shows the computer operating status.
4 Power
On: When the computer is operating.
Blinks: When the computer is in Sleep
mode.
Overview
Chapter 1
Getting Started
26
Right View
► For 35xV5C, 35xE5C, 35xE7C models
1 Headphone Jack
A jack used to connect the headphones.
2 Microphone Jack
A jack used to connect the microphone.
Plays CD or DVD titles.
CD Drive (ODD)
3 (Optional)
1 2
3
4
5
4 USB 2.0 Port
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
5 Security Slot
You can secure the computer by
connecting a lock and cable to the
Security Slot.
► For 35xV4C, 35xE4C models
1 2
3
4
5
Since an ODD(Optical Disk Drive) is
optional, the installed drive depends on
the computer model.
Overview
Chapter 1
Getting Started
27
Left View
1
2
3
4
5
1 DC Jack
A jack to connect the AC adapter that
supplies power to the computer.
2 Wired LAN Port
Connect the Ethernet cable to this port.
The internal heat of the computer is
emitted through these holes.
6
3 Fan Vents
If the vents are blocked the
computer may overheat.
Avoid blocking the vents as this may
be dangerous.
4 Monitor Port
A port used to connect a monitor, TV
or projector supporting a 15pin D-SUB
interface.
Digital Video/
5 Audio Port (HDMI)
(Optional)
You can connect an HDMI cable to this
port. Using this port, you can enjoy
digital video and audio on the TV.
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
6 USB 3.0 Port
The USB 3.0 feature is optimized for
Windows 8.
For Windows XP, the USB 3.0
feature may be restricted.
Overview
Chapter 1
Getting Started
28
Bottom View
1 Battery
This is a Lithium-Ion rechargeable
battery that supplies power to the
computer.
2 Battery Latches
The latch used to remove or install the
battery.
1
2
3
Memory
Compartment Cover/ The main memory and hard disk drive is
3
Hard Disk Drive
installed inside the cover.
Compartment Cover
Turning the Computer On and Off
Chapter 1
Getting Started
29
Turning the computer on
1
2 Lift the LCD panel up.
3 Press the Power button to turn the computer on.
Connect the AC adapter.
About Windows Activation
When you turn the computer on for the first time, the Windows
activation screen appears.
Follow the activation procedures according to the instructions on
the screen to use the computer.
Adjusting the screen brightness
When the computer runs on battery power, the LCD brightness is
automatically set to low.
Press the
4 Power button LED is lit while the computer is turned on.
LED
+
áᔪ
key combination to increase
the screen
brightness.
Ŗᮁ
Charms menu appears when you place your mouse
1 The
pointer at the edge of the top or bottom right of the screen.
Alternatively, if you place your finger on the᜽᯲right edge of the
touchpad and drag your finger toward the center, the Charms
menu appears.
ᰆ⊹
the bar by pressing the Settings
2 Increase
.
> Brightness
ᖅᱶ
áᔪ
Turning the Computer On and Off
Chapter 1
Getting Started
30
Ŗᮁ
Turning the computer off
᜽᯲
•• Since the procedures to turn the computer off may differ
depending on the installed operating system, please turn
the computer off according to the procedures for the
purchased operating system.
•• Save all your data before clicking on Shut down.
Charms menu appears when you place your mouse
1 The
pointer at the edge of the top or bottom right of the screen.
ᰆ⊹
2 Click Settings
> Power
ᖅᱶ
> Shut down.
⦽
If you want to power off your computer when you are logged
> Shut down.
out, unlock the screen and click Power
⦽
Chapter 2.
Using Windows 8
What is Microsoft Windows 8?
32
Screen At a Glance 33
Using the Charms
35
Using Apps 37
Windows Hot Key Function
40
What is Microsoft Windows 8?
Chapter 2
Using Windows 8
Microsoft Windows 8 (hereafter referred to as Windows) is an
operating system that is required for operating a computer.
32
Searching
for Help
To use your computer optimally, you need to know how to use it
properly. Therefore, It is better to learn how to use Windows by
utilizing Windows Help and Support.
•• The screen may appear somewhat different depending on
the model and the operating system.
•• Since this guide has been prepared based on Windows
8, some of the instructions may differ depending on the
version. It may also be modified without prior notice.
Displaying Help
Press the F1 Key on the keyboard to display the Help.
Alternatively, place your mouse cursor over the end of the top or
bottom right area on the screen to display the Charms menu. Click Charms menu > Settings > Help.
If you are connected to the internet, you can access the most
recent online Help.

Getting Started
You can view basic instructions on how to use
your computer including new function(s) for the
Windows OS.
Internet and
Networking
After connecting to the network, you can check
the Help section required to use the internet.
Security, Personal
You can check the Help information required
Information
to protect your computer and personal
Protection and
information.
Account
Screen At a Glance
Chapter 2
Using Windows 8
Windows 8 provides both the new Start screen mode and the
Desktop mode of the existing OS.
Start Screen
1 Start Screen
Refers to the default Start screen of
Windows 8.
2 App
Refers to the apps that are currently
installed.
3
Desktop
Displaying the
Charms
Start Screen
When you turn on the computer, the Start screen is displayed,
which allows you to use the applications (Application, App,
hereafter referred to as an App) at the same location.
1
2
3
4
5
6
7
3
33
The Charms is hidden at the right of the
screen. Place your mouse pointer at the
edge of the top or bottom right of the
screen to display the Charms.
Or you place your finger on the right edge of
the touch pad and drag your finger toward
the center, the Charms menu appears.
4 User Account
This refers to the currently used user
account.
5 Charms
This refers to the menu that allows you to
use functions such as Search, Share, Start,
Device and Settings.
6 Desktop
Switches to Desktop mode.
7 Camera
Allows you to take pictures or make a movie.
Screen At a Glance
Chapter 2
Using Windows 8
Desktop
This provides similar functions to those provided by the Desktop
in prior Windows versions.
1
2
3
2
4

1
Desktop
Refers to the Desktop.
The Charms is hidden at the right of the screen.
Displaying the Place your mouse pointer at the edge of the
2
Charms
top or bottom right of the screen to display the
Charms.
3
Charms
4
Switching
to the Start
Screen
This refers to the menu that allows you to use
functions such as Search, Share, Start, Device
and Settings.
Click the corner of the bottom left of the screen
to switch to the Start screen.
Displaying Documents and Files
Click Windows Explorer in the taskbar on the Desktop
search for documents and files.
to
34
Using the Charms
Chapter 2
Using Windows 8
The Charms is a new type of menu that combines the Start menu
with the Control Panel of existing Windows.
The Charms allows you to quickly configure the device(s)
connected to your computer, search for App(s)/file(s), and use the
sharing function, etc.
Activating the Charms
Search
Search
Search
Share
Share
Share
If you move your mouse pointer to the top or bottom right corner
of the screen, the Charms appears.
Displaying
the Charms
Menu
Displaying
the Charms
Menu
If you want to search for a program or file in the App(s)/
Settings/File(s), simply enter a keyword in the Search
charm and start Search.
You can also search within an App or on the Web.
You can use this menu to transfer a picture or file to
another user. You can easily share pictures or files with
other users simply by associating multiple Apps with the
Share charm.
You can move to the Start screen.
Start
Start
Start
Device
Device
Device
Charms
35
As this allows you to move directly to a desired device,
you can handle tasks such as importing pictures from
a digital camera, streaming a video to your TV or
transferring files to a device on the current screen.
The Settings charm allows you to perform basic tasks
such as adjusting the volume, turning off the PC, etc.
If you select the Settings charm while a specific App is
Settings
Settings
Settings running, the settings for the currently running App are
displayed.
Using the Charms
Chapter 2
Using Windows 8
36
Changing the Settings
Frequently used Windows menus are collected.
Click the Charms > Settings.
Icon
Name
Function Description
Wireless
Network
You can connect to a wireless network.
Select a wireless network to connect
to.
Adjusting the
Volume
You can adjust the volume or mute the
sound.
Screen
Brightness
⦽
⦽
ENG
⦽
You can adjust the screen brightness.
Notice
You can set the interval at which an
App sends notices.
Power
You can turn off your computer or
select the Power Options.
Language
You can set the Language.
Change PC settings
You can change more settings.
Using Apps
Chapter 2
Using Windows 8
An App refers to an application program (hereafter referred to as
an App). In a larger sense, it refers to all the software programs
installed on the operating system.
Windows 8 provides basic Apps for frequently performed tasks.
Starting/Exiting an App
Click on an App in the Start screen to activate it.
To exit the App
Move your mouse pointer to the top of the screen.
1 Your
mouse pointer changes to a hand shape.
and hold your mouse button and then drag it to the
2 Click
bottom of the screen. The App moves downward and
Using Apps
Displaying Currently Running App(s)
your mouse pointer to the top left corner of the screen
1 Move
to display the last run App.
move your mouse pointer down to display a list of the
2 Then,
currently running Apps in order.
on an App in that list or drag it to the center of the
3 Click
screen. Now, you can check the selected App which is
currently running.
Right-click over the App in the list and click Close to exit the
App.
disappears and exits.
1
1
2

2
37

Using Apps
Chapter 2
Using Windows 8
Running Two Apps at the Same Time
Adding/Removing an App to/from the Start Screen
1
Move your mouse pointer to the top of the screen. Your
2 mouse
pointer changes to a hand shape.
you click and hold your mouse button and move left or
3 Ifright,
you can split the screen to display multiple Apps.
the Screen Split Bar to change the screen split ratio.
4 Move
Supported screen split ratios are 3:7 or 7:3.
Click Start screen > right-click your mouse button.
at the bottom of the screen to display all the
Click All Apps
Apps that are currently installed.
Select the Apps in the Start screen.
Weather Screen
App Split Bar
right-click over the App to be added, the relevant menu
1 Ifis you
activated at the bottom of your screen.
2 Click Pin to start
or Unpin from Start
.
Store App
1
2

Ex) If you run the Weather App and Store App at the
same time
38
Ex) When removing an App in the Start screen
Using Apps
Using the Windows Store
If you run the App Store in the Start screen, the Apps in the
Windows Store are displayed.
However, a Microsoft account is required to purchase App(s) in the
Windows Store.
Continue after registering your Microsoft Account in the
Charms.
Chapter 2
Using Windows 8
39
Configuring your Microsoft Account
A Microsoft Account allows you to synchronize your settings with
other device(s) running Windows 8 online allowing you to share
file(s) or settings.
You should register a Microsoft Account to download or purchase
App(s) from the Store.
1 Run the Charms and click Settings > Change PC Settings.
Users > Your Account > Switch to a Microsoft
2 Click
account.
your account through the following relevant
3 Register
procedures.
1

2
Windows Hot Key Function
You can use the following convenient hot keys in Windows 8.
Function
Hot Keys
Function Description
Displaying the
Start Screen
Windows Key
Displaying the
Desktop
Windows Key + D
Switches to Desktop
mode.
Running the
Charms
Windows Key + C
Activates the Charms.
Locking the
Screen
Windows Key + L
Locks the screen.
Opening the
Ease of Access
Center
Windows Key + U
Opens the Ease of Access
Center configuration.
Opening the
Second Screen
Settings
Windows Key + P
Opens the External
Monitor Settings menu.
Opening the
Advanced
Management
Tool
Windows Key + X
Opens the Advanced
Management Tool.
Exit App
Alt + F4
Switches to Start mode.
Exits the currently
running App.
Chapter 2
Using Windows 8
40
Chapter 3.
Using the computer
Keyboard
42
Touchpad
45
CD Drive (ODD, Optional)
49
Multi Card Slot (Optional)
50
Connecting an External Display Device
52
Adjusting the Volume
56
LCD Brightness Control
58
Wired Network
59
Wireless Network (Optional)
62
Using the TPM Security Device (Optional)
64
Using the Multimedia App (Optional)
73
Samsung Software Update
77
Diagnosing the Computer Status and
Troubleshooting
78
Using the Security Slot (Optional)
79
Keyboard
Chapter 3.
Using the computer
Shortcut key functions and procedures are discussed in the following sections.
•• The keyboard image may differ from the actual keyboard.
•• The keyboard may differ depending on your country. The following mainly describes the shortcut keys.
Shortcut Keys
Press both the Fn key and hot key at the same time.
Alternatively, press the Fn Lock key as well as a hot key to use the hot key functions more easily.
► Method 1
+
Shortcut Keys
► Method 2
1
2
Shortcut Keys
42
Keyboard
Shortcut Keys
Chapter 3.
Using the computer
Name
Settings
43
Function
The Samsung software control program, the Settings, is launched.
Screen Brightness Control Controls the screen brightness.
CRT/LCD
Switches the screen output to the LCD or external monitor when an external monitor (or TV)
is connected to the computer.
Touchpad
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad off.
Mute
Volume Control
Silent Mode
Airplane Mode
Press this button to turn the audio on or off.
Controls the volume.
Reduces the Fan noise so that users can use the computer without hearing noise.
Turns all wireless network devices on or off.
(Only for models with a wireless network device.)
Keyboard
Chapter 3.
Using the computer
Other Function Keys (Optional)
Performs the right-click mouse function (touchpad).
+
•• If you press the Fn Lock key, you can use the hot key functions
without pressing the Fn key.
•• If the Fn Lock function is On: You can use the hot key
functions without pressing the Fn key.
•• If the Fn Lock function is Off: You can use a hot key
function by pressing the Fn key + the hot key at the same
time.
If the hot keys do not work properly, you have to install the
Settings.
44
Touchpad
The touchpad provides the same function as a mouse and the left
and right buttons of the touchpad plays the role of the left and
right buttons of a mouse.
Chapter 3.
Using the computer
45
Click Function
Place a finger on the touchpad and click on an item once.
Alternatively, press the left button once quickly and release it.
•• Touch the touchpad with your fingers only.
Anything other than your fingers, such as a ball-point pen,
will not be recognized by the touchpad.
Tap
or
•• If you touch the Touchpad or press the Touchpad buttons
while booting up, the Windows boot time may be
extended.
Click
Basic Touchpad Functions
Double-Click Function
Moving the cursor on the screen
Place your finger on the touchpad slightly and move your finger.
The mouse cursor will move accordingly. Move your finger in the
direction you wish to move the cursor.
Put your finger on the touchpad and quickly tap twice with your
finger on an item you want.
Alternatively, press the left touchpad button twice quickly.
TapTap
or
ClickClick
Touchpad
Chapter 3.
Using the computer
Right Button Function
46
The Gesture Function of the Touchpad (Optional)
This corresponds to clicking the right mouse button.
Press the right touchpad button once. The corresponding pop-up
menu appears.
•• The Touchpad Gesture function may not be provided and
the version of the function may differ depending on the
model. Some usage procedures may differ depending on
the version.
áᔪ
•• For detailed usage procedures, refer to the description in
the Touchpad Settings window.
Click
Ŗᮁ
Configuring the Gesture Function
Some gesture functions may not be configured.
᜽᯲
Drag Function
In this case, you can configure them using the following path.
Dragging refers to moving an item to another place after selecting
it.
On the Desktop, click the Charms menu > Settings
1 Control
Panel > Hardward > Touchpad.
ᰆ⊹
Press and hold down the left touchpad button over an item you
want to drag and move the item to the new location.
Move
Holding down the left
touchpad button
>
ᖅᱶ
the Touchpad Settings window appears, click the
2 When
corresponding item in the Select an Item to Configure
setting to select the checkbox for the corresponding item.
To cancel the Gesture function, deselect the checkbox for the
corresponding item in the Touchpad Settings window.
Touchpad
Chapter 3.
Using the computer
The Scroll Function
Charms Menu Activating Function
This function is the same as the scroll area of the Touchpad.
If you place your finger on the right edge of the touch pad and
drag your finger toward the center, the Charms menu appears.
If you place two fingers over the Touchpad and move them up,
down, left or right, the screen is scrolled up, down, left or right
accordingly.
47
or
Displaying Additional Menu(s) of a Currently Running
App
Zoom Functions
If you place two fingers over the Touchpad together or apart, the
current image or text is zoomed in or out.
Zoom-in
Zoom-out
or
Place your finger at the edge of the top area on the touch pad and
drag your finger toward the center, and the menu of the currently
running App appears.
Touchpad
Last Run Window Opening Function
Place your finger on the left edge of the touch pad and drag
your finger towards the center to activate a previously operating
program from among the currently running programs.
Chapter 3.
Using the computer
48
Touchpad On/Off Function
Locking with shortcut keys
If you want to use the mouse only without using the touchpad,
you can turn the touchpad off.
To lock the touchpad function, press the
+
keys.
You can set the touchpad and touchpad button settings in
the tabs that appear when clicking Charms menu on the
Desktop > Settings > Control Panel > Hardware and
Sound > Touchpad.
Auto-locking when connecting USB mouse
If an external USB pointing device is connected in the Charms
menu in Desktop > Settings > Control Panel > Hardware and
Sound > Touchpad, check Disabled to disable the touchpad
feature when connecting to the USB mouse.
This auto-locking function is not provided for some models.
CD Drive (ODD, Optional)
If your computer does not have a CD drive, you can purchase an
external CD drive.
Chapter 3.
Using the computer
49
the CD tray opens, insert a CD or DVD and push the
2 When
tray in until it clicks.
•• Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk
drive when the CD rotates at a high speed.
•• When you clean a CD or DVD title, wipe with a soft cloth
from inside to outside.
•• Insert a Mini CD into the center of the CD drive.
•• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
•• Using a CD that is not in the shape of a circle is not
recommended.
Using CD Drive
the Eject button of the optical disk drive at the side of
1 Press
the computer.
the CD tray inward until it clicks.
3 Push
The CD drive status indicator is turned on.
•• A CD drive’s reading and writing speed may differ
depending on the condition and type of the media.
Status Indicator Emergency Hole
Eject Button
•• To eject a CD when the CD drive does not work or the
) into
computer is off, place the end of a paper clip (
the Emergency Hole until the CD tray is ejected.
Multi Card Slot (Optional)
Using the multi card slot, you can read and write data to cards.
You can use a card as a removable disk and conveniently
exchange data with digital devices such as a digital camera, digital
camcorder, MP3, etc..
Chapter 3.
Using the computer
50
Using the card
the card into the multi card slot in the indicated
1 Insert
direction.
•• Supported Cards : SD Card, SDHC Card, SDXC Card
•• You have to additionally purchase a multi card with the
necessary capacity depending on your requirements.
•• You can use a multi card just like any data storage device.
A copyright protection function is not supported.
•• Since you can lose a card when moving the computer,
keep the card separately.
•• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
Example) SD Card
following message appears on the top right. Click to
2 The
open the folder and click View Files.
•• If a slot protection dummy card is inserted into your
computer, remove the dummy card before using the
computer.
•• These descriptions are written based on Windows 8, the
latest operating system. Therefore, some descriptions and
figures may differ from your operating system. But as the
usage is similar to other Windows operating systems, you
can use these descriptions for reference.
If a message appears to notify you of any problem, click the
corresponding window > Continue without Scanning. You
can perform the following process described in No. 3.
Multi Card Slot (Optional)
Chapter 3.
Using the computer
51
Windows Explorer runs on the Desktop. You can save, move
Right-click over a card drive with the touchpad and select
3 and
2
delete data on the corresponding drive.
Format.
3 Click Start to the formatting.
Using a Mini SD
Since the above cards are too small, you cannot insert the cards
into the slot directly.
Insert the card into the dedicated adapter (available from most
electronic retailers) and then insert the adapter into the multi card
slot.
To remove a memory card
•• To use a card to exchange data with a digital device such
as a digital camera, formatting the data using the digital
device is recommended.
•• When you try to use a card, which is formatted in the
computer, in another digital device, you may have to
format the card again in the device.
Take hold of the end of the card and remove the card.
•• You cannot format, write or delete data from a SD, or SDHC
card with a write protection tab when it is in the Lock
position.
To format a memory card
•• Inserting and removing a memory card repeatedly may
damage the memory card.
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
1
Click the Windows Explorer
Desktop.
icon in the taskbar on the
Connecting an External Display Device
If you connect an external display device such as a monitor, TV,
projector, etc., you can view the picture on the wider screen of the
external device when you give a presentation or watch a video or
movie.
Chapter 3.
Using the computer
About the connection cable
Users should additionally purchase the necessary connection
cables.
The computer provides an analog monitor port (D-SUB) and a
digital video/audio port (HDMI).
The visual quality is sharper when a display device is connected
through the HDMI port rather than the analog monitor port
(D-SUB) port. Therefore, when multiple ports are supported,
connect a display device to a port that provides the better visual
quality.
Before you start, check the port and cable of the external
display device and then connect the display device to the
computer.
D-SUB Cable
HDMI Cable
52
Connecting an External Display Device
Connecting to the monitor port (Optional)
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
3
Chapter 3.
Using the computer
Press the
+ 3&୘ִփ
key once to display a window to select
the monitor mode. Select a mode.
3&୘ִփ
3&୘ִփ
You can give better presentations by connecting the computer to
a projector.
PC Screen only
1
Duplicate
Connect the D-SUB port of the computer and the port of the
monitor or TV with the monitor cable (15 pin).
External
Monitor
TV
53
3&୘ִփ
The
contents are only displayed on the PC
‫ࢿـ‬
monitor (current device).
‫ࢿـ‬
‫ࢿـ‬
The
contents of the current device are displayed
on‫ࢿـ‬
the external device as well.
୙ࢠ
Projector
Extend
୙ࢠ
The
screen of the current device is expanded to
the external device.
୙ࢠ
Second screen Only
୙ࢠ
ѿ‫ء‬ध୘ִփ
The
contents are displayed only on the screen of
the
external device.
ѿ‫ء‬ध୘ִփ
ѿ‫ء‬ध୘ִփ
Alternatively, to set up dual view:
the power cord of the connected monitor, TV or
2 Connect
projector and turn the power on.
Change your TV to external device mode when connecting to
the TV.
ѿ‫ء‬ध୘ִփ
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Connecting an External Display Device
Chapter 3.
Using the computer
54
Connecting through the HDMI port (Optional)
By connecting the computer to a TV with a HDMI port, you can
enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to configure the
screen and sound.
1 Connect the HDMI cable to the HDMI port of the TV.
External
Monitor
2
Press the
+ 3&୘ִփ
key once to display a window to select
the monitor mode. Select a mode.
3&୘ִփ
3&୘ִփ
PC Screen only
3&୘ִփ
The
contents are only displayed on the PC
‫ࢿـ‬
monitor (current device).
‫ࢿـ‬
Duplicate
TV
Projector
‫ࢿـ‬
The
contents of the current device are displayed
on‫ࢿـ‬
the external device as well.
୙ࢠ
Extend
୙ࢠ
The
screen of the current device is expanded to
the external device.
୙ࢠ
Second screen Only
୙ࢠ
ѿ‫ء‬ध୘ִփ
The
contents are displayed only on the screen of
the
external device.
ѿ‫ء‬ध୘ִփ
•• This is only supported for models that support a TV output
port (HDMI).
•• When a TV provides more than one HDMI port, connect
the computer to the DVI IN port.
•• When connecting the computer to a TV, switch the
external input mode of the TV to HDMI.
ѿ‫ء‬ध୘ִփ
•• External Monitor / TV is not supported in the DOS
ѿ‫ء‬ध୘ִփ
Command Prompt window.
•• Simultaneous output to all 3 (LCD + CRT + HDMI) is not
supported.
Connecting an External Display Device
Using AMD Graphics Effectively (optional)
PowerXpress is Switchable Graphics technology that selectively
enables either the internal or external graphics chipset depending
on the program to extend the battery life time while maintaining
the graphics performance.
Chapter 3.
Using the computer
on the Desktop and select Configure Switchable
1 Right-click
Graphics from the popup menu.
the Browse button and register the software and click
2 Click
the Apply button.
This technology uses the internal graphics by default to reduce
battery consumption and switches to the external graphics when
the user uses some program functions that require a high graphics
performance such as games and playing videos.
•• This description is only for Windows 8 and models with
AMD PowerXpress technology.
•• If Windows XP is installed, you can only use Internal
Graphics.
z
► Adding programs for PowerXpress graphics technology
You have to register the program to run some functions of a
program using the external graphics chipset.
Some programs are pre-registered. To register more programs,
complete the following steps.
•• Unregistered programs will run using the internal graphics
chipset.
•• You can register executable files (EXE) only.
55
x
now on some of the functions of the registered
3 From
program that require a high graphics performance will
run with the external graphics chipset without additional
configuration.
Adjusting the Volume
Chapter 3.
Using the computer
You can adjust the volume using the keyboard and the volume
control program.
Adjusting the Volume using the Keyboard
+
Alternatively, press the
or
áᔪ
+
Ŗᮁ
Using the Sound Recorder
The procedures to record sound using the Windows Recorder are
described below.
a microphone to the microphone jack.
1 Connect
You can also use the internal MIC.
+
key combination to
turn the volume on or off.
᜽᯲
Adjusting the Volume using the Volume
ᰆ⊹
Adjustment Program
Click the Charms menu > Settings
bar.
56
>
to adjust the control
ᖅᱶ
Right-click over the Volume icon
2 Recording
Device.
on the taskbar and select
if the microphone is set as the default recording
3 Check
device.
áᔪ
If this is the case, it is already set as the default device. If not,
right-click over the microphone and select Set default.
Ŗᮁ
Right-click over the Charms menu > Start
to click All
4 Apps
> Sound Recorder. Then press Start Recording to
᜽᯲
Mute
record.
ᰆ⊹
⦽
ᖅᱶ
Adjusting the Volume
Using SoundAlive (Optional)
The SoundAlive function enables you to experience more
stereophonic sound using stereo speakers.
áᔪ
•• SoundAlive
is only supported in Windows 8.
•• The software programs provider may vary, depending on
your computer model.
Ŗᮁ
•• In addition, some pictures may differ from actual product
depending on the computer model and software version.
᜽᯲
Right-click over the Volume
1 and
click Play Device.
in the taskbar on the Desktop
ᰆ⊹
(Alternatively, click the Charms menu on the Desktop >
Settings
> Control Panel > Hardware and Sound >
Sound.) ᖅᱶ
2 Right-click over the Speakers and select Properties.
3 Select the SoundAlive tab and select one of the modes.
Chapter 3.
Using the computer
57
LCD Brightness Control
Chapter 3.
Using the computer
58
áᔪ
The screen brightness is automatically set to the brightest
Ŗᮁ
level when AC power is connected and
the brightness is
automatically set dimmer when the computer runs on battery
power to extend the battery use time.
᜽᯲
Controlling the Brightness Usingᰆ⊹the Keyboard
1
Click the Charms menu > Settings
Adjustment icon
.
2
> Screen
ᖅᱶ
Adjust the brightness with the screen brightness control bar.
⦽
•• Saving battery power consumption
Decreases the LCD brightness when the computer
is running on battery power to save battery power
consumption.
•• LCD bad pixels principle of computer
Samsung observes the specifications regarding strict
quality and reliability of LCD. But in spite of that, it is
inevitable that there might be a small number of bad
pixels. A large number of bad pixels can cause problems in
appearance, but a small number of pixels doesn’t affect the
computer performance.
Therefore Samsung observes and manages the following
dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with
computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the
LCD.
Wired Network
᜽᯲
Chapter 3.
Using the computer
ᰆ⊹
A wired network is a network environment used for a company
network or broadband internet connection at home.
•• Since these descriptions are written on the basis of the
latest operating system, Windows 8, some of the content
and the figures of the descriptions may differ depending
on the operating system. Since the procedures for other
Windows operating systems are similar, use the computer
referring to these descriptions.
Click Charms menu on the Desktop > Settings
>
2 Control
Panel > Network and Internet > Network and
ᖅᱶ
Sharing Center and click on Change adapter settings in
the left menu pane.
•• The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
Connecting to the Wired LAN
1 Connect the LAN cable to the wired LAN port.
Ethenet and click the right button of the touch pad
3 Select
and select Properties.
The LAN Device name may differ depending on your
computer’s Network Device.
59
Wired Network
Internet Protocol Version 4(TCP/IPv4) from the list
4 Select
of Network Components and click Properties.
Chapter 3.
Using the computer
60
the IP settings.
5 Configure
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select Use the
following IP address, and set the IP address manually.
•• The Network Component name may differ depending on
the Operating System Installed.
•• To add a network component, click Install in the screen
shown in the figure above. You can add clients, services,
and protocols.
When not using DHCP, ask your network administrator for the
IP address.
you have completed the settings, click the OK button.
6 When
The network settings have been completed.
Wired Network
áᔪ
Chapter 3.
Using the computer
61
Ŗᮁ
Using the WOL (Wake On LAN) function
<Wake On LAN> is a function that activates the system᜽᯲from Sleep
mode when a signal (such as a ping or magic packet command)
arrives over the network (wired LAN).
- <Wake On LAN> feature may not work while using Hybrid
power saving feature. Hybrid sleep mode can be disabled
from Power Options under Control Panel.
ᰆ⊹
1
Click Charms menu on the Desktop > Settings
>
ᖅᱶ
Control Panel > Network and Internet > Network
and
Sharing Center and click on Change adapter settings in
the left menu pane.
on the Wired Ethernet Connection and select
2 Right-click
Properties.
Configure > Power Management tab. Select Allow
3 Click
this device to wake the computer, then click OK. Restart
the system.
- If the system wakes up from Sleep mode even though there
is no received signal, use the system after disabling the
<Wake On LAN> function.
- The LAN LED may not be turned off if System is shoutdown
without disabling the WOL (Wake on LAN) option.
- C
onnecting a wired LAN while using a wireless LAN may not
activate the <Wake On LAN> function. Set the Wireless LAN
to Disable to use the <Wake On LAN> function.
For Windows 8, Wake On LAN is not supported by Ping.
When connected to a 100Mbps/1Gbps wired LAN and the
computer exits Sleep/hibernation mode, a message appears
informing you of a connection to a 10Mbps/100Mbps
wired LAN. This happens because when the computer exits
standby/hibernate mode, restoring the network takes about
3 seconds. When the network is restored, it operates at
100Mbps/1Gbps.
When system is running on battery, some time it may take
a few second extra after inserting LAN cable to be able to
connect to internet. This symptom happen as a result of
power saving feature to reduce battery consumption.
When system is running on battery, the Wired LAN speed
is decreased automatically to reduce battery consumption.
In such case, a 1Gbps /100Mbps LAN would function at
100Mbps/10Mbps speed.
Wireless Network (Optional)
A wireless network (Wireless LAN) environment is a network
environment that enables communicating between multiple
computers at home or a small-size office through wireless LAN
devices.
Chapter 3.
Using the computer
62
•• The screen figures and terms may differ depending on the
model.
•• Depending on the program version, some functions may
not be provided or different functions may be provided.
•• The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional.
The pictures in this manual may differ from the actual
product depending on your wireless LAN device model.
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless
LANs, and corresponds to a wireless hub in a wired network.
You can connect multiple wireless LAN installed computers
to an AP.
Wireless Network (Optional)
áᔪ
Chapter 3.
Using the computer
63
Ŗᮁ
Connecting to a Wireless LAN
᜽᯲
If there is an AP, you can connect to the Internet via the AP using
the Wireless LAN connection method provided by Windows.
Connect.
2 Click
If a network key is set for the AP, enter the network key and
then click OK.
ᰆ⊹
1
If you click the Charms menu > Settings
> Network
Connections
icon, a list of available APsᖅᱶappears. If you
select an AP to connect to, the Connect button appears.
For the network key, please ask your network administrator.
AP List
the AP connection is completed, Connected is
3 When
displayed next to the corresponding AP. You can now you can
use the wireless network.
Using the TPM Security Device (Optional)
A TPM (Trusted Platform Module) security device is a security
solution that protects your personal information by saving
the user authentication data on the TPM chip installed on the
computer.
To use the TPM security device, you have to initialize the TPM chip
in the BIOS Setup, initialize the TPM program, and then register
the user.
Chapter 3.
Using the computer
Setting Up the TPM
To use the TPM function, you have to complete the following
steps.
the TPM chip
1 Initializing
Initializes the authentication information saved on the TPM
chip.
•• This function is only supported for models with TPM
(security chip).
•• For more information, refer to the online help for the
program.
•• The program version described in this manual is subject to
change and the screenshots and terms used in this manual
may differ from the actual product.
64
the TPM program
2 Installing
Installs the TPM program.
the TPM program
3 Registering
Registers the TPM program.
If you complete the steps above, you can use the TPM function.
Using the TPM Security Device (Optional)
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
•• Initializing the TPM chip erases all authentication
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
•• To initialize the TPM chip again while the TPM function is
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after reinitialization.
the computer.
1 Restart
When the Samsung logo screen appears, press the F2 key
Chapter 3.
Using the computer
65
the BIOS screen appears, select the Security > TPM
2 IfConfiguration
item and press Enter.
SysInfo
Aptio Setup Utility
Advanced
Security
Supervisor Password
User Password
HDD Password
Clear
Clear
Clear
Set Supervisor Password
Set User Password
Set HDD Password
[Enter]
[Enter]
[Enter]
Password on Boot
[Enabled]
Boot
Exit
▶ TPM Configuration
the TPM Support item to Enabled and set the Change
3 Set
TPM Status to Clear.
Aptio Setup Utility
Security
repeatedly.
TPM Configuration
TPM Support
Change TPM Status
Security Chip State
[Enabled]
[No Change]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
4 Press the F10 key to save the changes.
Using the TPM Security Device (Optional)
the system reboots, press the corresponding key(s) by
5 When
following the onscreen instructions.
the computer restarts automatically and the Samsung
6 When
logo screen appears, press the F2 key repeatedly.
7
Select the Security > TPM Configuration > Change TPM
Status item and set the item to Enable and Activate.
Aptio Setup Utility
Security
TPM Configuration
TPM Support
Change TPM Status
Security Chip State
[Enabled]
[No Change]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
8 Press the F10 key to save the changes.
the system reboots, press the corresponding key(s) by
9 When
following the onscreen instructions.
the F10 key to save the changes. The computer
10Press
automatically restarts. Initialization of the TPM chip has been
completed. Now, install the TPM program and register the
TPM program.
Chapter 3.
Using the computer
66
Installing the TPM program
You can install the TPM program as follows. Install the program
according to the procedures below.
This program is only provided for models with Recovery and
the TPM function.
1 Run Recovery and click on System Software.
2 Click on System Software Installation.
SW Update program will be launched.
3 The
Select TPM Host SW and click Install Now.
If the system software media is supplied with the product,
you can install the program by using the system software
media (only when supplied.)
4 After the installation, if you click OK, the computer restarts.
Using the TPM Security Device (Optional)
Registering the TPM program
From the Start Screen, right-click any area and select
1 All
in the bottom right corner. Then, click
apps
Infineon Security Platform Solution > Security Platform
Management > User Settings. (with administrator authority)
icon on the Taskbar and
Alternatively, double-click the
run initialization with administrator authority.
security authentication settings begin with the
2 The
Initialization Wizard. When the Initialization Wizard
appears, click Next.
If the status not initialized message appears, click Yes.
If you backup the emergency recovery file to an external
storage device according to the instructions of the
Initialization Wizard, you can use the TPM security device
more safely.
Chapter 3.
Using the computer
a Security Platform Feature and set a basic user
3 Select
password.
4 Complete the registration according to the instructions.
user registration for the TPM program has been
5 The
completed. You can encrypt files and folders by using
the encryption file system, and use files and folders to be
encrypted by creating or copying them to the virtual drive.
The virtual drive is created in the following location.
67
Using the TPM Security Device (Optional)
Using the TPM program
Chapter 3.
Using the computer
68
Confirm Attribute Changes window appears, select
2 Ifthetherange
to apply the encryption to and click OK.
(This dialog box only appears when the folder is encrypted.)
For more information about using the TPM program, refer to
the online help for the program.
Encrypting a file (folder)
This function enables encrypting files and folders. You can safely
protect documents through the Encrypt File System (EFS).
The Encrypt File System(EFS) function is supported by the
following operating systems.
•• Windows XP Professional
•• Windows Vista Business / Enterprise / Ultimate
•• Windows 7 Professional / Enterprise / Ultimate
•• Windows 8 Pro / Enterprise
over the folder (or file) to be encrypted, and select
1 Right-click
Encrypt from the pop-up menu.
If the current operating system is Windows 8/7/Vista, the user
account control window appears. In this case, click Continue.
the user authentication window, enter the Basic user
3 Inpassword
you entered when registering the user and click
OK.
Using the TPM Security Device (Optional)
will be able to confirm that the color of the folder (file)
4 You
name in the encrypted folder has been changed to green.
Chapter 3.
Using the computer
69
Decrypting an encrypted folder (file)
over an encrypted folder (file) and select Decrypt
1 Right-click
from the pop-up window.
the user authentication window appears, enter the basic
2 Ifuser
password you entered when registering the user and
click OK.
3 The folder (file) is decrypted.
Using the virtual drive (Personal Secure Drive: PSD)
Opening an encrypted folder (file)
1 Double-click an encrypted folder (file).
the user authentication window appears, enter the basic
2 Ifuser
password you entered when registering the user and
click OK.
3 The folder (file) opens.
The virtual drive (PSD) is a virtual space to save and manage
confidential data. In the created virtual drive (PSD), you can create
files and folders as with a normal drive (e.g. drive C:) and you can
use confidential data saved on another drive by copying the data
to the virtual drive (PSD).
Using the TPM Security Device (Optional)
Chapter 3.
Using the computer
When the virtual drive (PSD) does not appear
When the virtual drive (PSD) is not loaded
You can only use the virtual drive (PSD) when you have selected
the Personal Secure Drive (PSD) option during the program
registration.
To use the virtual drive (PSD), the virtual drive (PSD) should be
loaded first. If it is not loaded, you can load it according to the
procedures below.
If you have not selected the option during the registration,
complete the following steps.
1
From the Start Screen, right-click any area and select
in the bottom right corner.
All apps
Then, click Infineon Security Platform Solution > Security
Platform Management > User Settings tab > Configure
Security Platform Features.
the Initialization Wizard appears, select Personal
2 When
Secure Drive (PSD) and enter the user password.
Next several times according to the instructions of the
3 Click
Initialization Wizard to finish the wizard.
70
Right-click over the Security Platform
icon in the system
1 tray
of the Taskbar and select Personal Secure Drive > Load
from the pop-up menu.
2 InOK.the load window, enter the basic user password and click
click Start > Computer, you will be able to confirm that
3 IftheyouPersonal
Secure Drive is created.
Note that when you have copied confidential data to the PSD,
the original data files are not encrypted.
Using the TPM Security Device (Optional)
When you have to register again (to erase the
authentication information on the TPM chip)
To register a user again, you need to delete the existing
authentication information saved on the TPM chip and then clear
the TPM chip.
Chapter 3.
Using the computer
71
Deleting the virtual drive
If a virtual drive has been created, you have to delete the virtual
drive before deleting the existing authentication information
saved on the TPM chip.
Register the user in the following order.
over
1 Right-click
Create/Manage.
1 Delete the virtual drive.
the existing authentication information saved on the
2 Delete
TPM chip.
2 Click Next.
the password that you entered when registering the
3 Enter
TPM program and click Next.
>
and click Personal Secure Drive >
4 Select Delete selected PSD and click Next.
“I want to permanently delete my Personal
5 Select
Secure Drive without saving an unencrypted copy of its
contents.” and click Next.
6 Click Next and then Finish.
7 Now the virtual drive has been deleted.
Using the TPM Security Device (Optional)
Deleting the existing authentication information saved
on the TPM chip.
the desktop, select the Charms menu > Settings >
1 On
Control Panel > Programs > Uninstall a program >
Infineon TPM Professional Package. Then click Uninstall.
the message window appears, click Yes to remove the
2 Ifprogram.
3 If the Infineon Security Platform message appears, click No.
Click the Windows Explorer
4 Desktop.
icon in the taskbar on the
> Options > Folder Options > View > Hidden files
5 InandView
folders item, select the Show hidden files, folders, and
drives option and click OK.
the Start > Computer > Drive C: > ProgramData
6 Click
folder and delete the Infineon folder.
the TPM Program has been deleted.
7 Now
To use the TPM function, please repeat the procedures of the
TPM chip initialization process.
Chapter 3.
Using the computer
72
Using the Multimedia App (Optional)
You can enjoy photo, video and music files with the S Camera, S
Gallery and S Player apps.
S Camera
You can take photos and record videos with the S
Camera app, and view them directly in this app.
S Gallery
Only photos or videos recorded with the S Camera
app can be viewed with the S Camera app.
S Player
You can view the photo, video and music files saved
on the computer.
Depending on the version of the program, some functions
may not be provided or different functions may be provided.
Third-party software related services
•• For descriptions about and service requests for third-party
software, please contact the relevant manufacturer.
•• Some troubleshooting actions in response to service
requests may not work depending on the software
manufacturer.
Chapter 3.
Using the computer
You can launch an app in the Start screen.
73
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
74
áᔪ
a picture, slide the camera mode bar into the Photo
2 To takeposition.
Using the S Camera app
Ŗᮁ
1
Tap Charm menu > Start
To make a video recording, slide the camera mode bar to the
Video
position.
> S Camera.
᜽᯲
Camera mode (Photo
, Video
)
ᰆ⊹
3
Tap on Take a picture/Record a video
to take a picture
or record a video.
view the picture or video using the Picture preview
4 You can
or S Gallery app.
ᖅᱶ
The S Camera app is not available in Desktop mode.
Precautions while taking a picture or video
•• Do not take a picture or video of others without their
consent.
Zoom in/out
Photo settings
Take a picture/
Record a video
Picture
preview
•• Do not take a picture or video in locations where this is not
allowed.
•• Do not take picture or videos in locations where you may
infringe on others’ privacy or confidential information may
be exposed.
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
áᔪ
Editing a photo
Using the S Gallery app
Ŗᮁ
1
can view the pictures and videos taken by the S Camera.
2 You
In addition, you can apply special effects to the pictures using
Tap Charm menu > Start
> S Gallery.
᜽᯲
ᰆ⊹
the photo editing function.
ᖅᱶ
You can take a picture in the S Gallery app by tapping the
Camera icon.
Picture preview.
1 Select
Drag it upward slightly from the bottom center.
If the options menu appears, select Edit
.
75
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
áᔪ
2 Select an effect to be applied to the photo.
Using the S Player app
Ŗᮁ
E.g. If you select Draw
Line preview
1
Tap Charm menu > Start
Color
Undo
> S Player.
᜽᯲
My Music
ᰆ⊹
My Videos
My Photos
ᖅᱶ
Erase/Draw
Line thickness
Save Close
Frame
Draw
Stamp
Music playlist
Slideshow
My photo list
2 Select a menu to enjoy photo, video and music files.
Some files may not be played depending on their format.
76
Samsung Software Update
SW Update is a software program that searches for Samsung
software programs and drivers installed when you purchased the
computer and helps you update any drivers or programs.
•• You can check updatable files before performing the
update only when you are connected to the internet.
•• SW Update does not provide any updates for device
drivers or software programs installed separately by the
user.
From the Start Screen, right-click any area and select All
1 Apps
in the bottom right corner. Then, click SW Update.
the program is running for the first time, the User
2 IfAgreement
for personal information use appears.
Click Agree.
The SW Update program runs.
3 Select
the items that you want to update before proceeding
with the update process.
Chapter 3.
Using the computer
Software List
Software
Update
77
Diagnosing the Computer Status and Troubleshooting
The Support Center program, which is Samsung’s computer’s
troubleshooting guide, supports diagnosing the system and has a
FAQ for frequently occurring problem(s).
Support Center may not be provided or may be a different
version depending on the model.
From the Start Screen, right-click any area and select All
1 Apps
in the bottom right corner. Then, click Support
Chapter 3.
Using the computer
78
Searching for
computer’s problems
Diagnosing
Computer and
Troubleshooting
FAQ for
computer’s
major problems
Center.
is activated and starts diagnosing your computer.
2 eSupport
After the diagnosing process is finished, the System Status
menu displays a list of the current problems to be solved as
shown.
can solve a problem by clicking the Troubleshoot button
3 You
for the problem.
Using the Security Slot (Optional)
You can secure the computer by connecting a lock and cable to
the Security Slot.
To use this feature, you have to purchase the lock and cable
additionally. To use the lock and cable, refer to the product
manual.
Tie the lock and cable to a fixed object and install the other end of
the cable to the security slot.
Chapter 3.
Using the computer
79
Chapter 4.
Settings and Upgrade
BIOS Setup
81
Setting a Boot Password
83
Changing the Boot Priority
86
Upgrading Memory
87
Battery
89
BIOS Setup
The BIOS Setup enables you to configure your computer hardware
according to your needs.
•• Use the BIOS setup to define a boot password, change the
booting priority, or add a new device.
•• Since incorrect settings may cause your system to
malfunction or crash, take care when configuring the BIOS.
•• The functions of the BIOS setup are subject to change for
product function enhancement purposes.
•• The BIOS Setup menus and items may differ depending on
your computer model.
Chapter 4.
Settings and Upgrade
Entering the BIOS Setup
the computer on.
1 Turn
Immediately press the F2 key several times.
a moment, the BIOS setup screen appears.
2 After
The items in the BIOS setup may differ depending on the
product.
81
BIOS Setup
Chapter 4.
Settings and Upgrade
82
System Setup Keys
The BIOS Setup Screen
The BIOS Setup menus and items may differ depending on
your computer model.
Setup Menu
Help
Help for the
selected
item appears
automatically.
Setup Items
Setup Menu
Description
SysInfo
This is a description about the basic specifications
of the computer.
Advanced
Using this menu, you can configure the major
chipsets and additional functions.
Security
Used to configure security functions, including
passwords.
Boot
This menu enables you to configure peripherals and
booting related settings such as the boot priority.
Exit
Used to exit the Setup either saving the changes or
not.
In the Setup, you have to use the keyboard.
F1
Press to view the Setup Help.
Up & Down
Keys
Press to move up and down.
F5/F6
Press to change the item value.
F9
Press to load the default Setup
settings.
ESC
Press to return to a higher level
menu or to move to the Exit menu.
Left & Right
Keys
Press to move to another menu.
Enter
Press to select an item or to enter a
sub menu.
F10
Press to save the changes and exit
Setup.
The keyboard image may differ from the actual keyboard.
Setting a Boot Password
Chapter 4.
Settings and Upgrade
If you set a password, you have to enter the password when you
turn the computer on or enter the BIOS Setup.
1 Select the Security menu in the BIOS Setup.
By configuring a password, you can restrict system access to
authorized users only and protect data and files saved on the
computer.
2 In the Set Supervisor Password item, press <Enter>.
83
XXXXXXXX
•• The password setting provides the following 3 sub menus.
(Supervisor Password, User Password and HDD Password)
•• Do not lose or forget your password.
•• Do not let others know your password.
•• If you forget the Supervisor Password or HDD Password,
you will need to request assistance from the service center.
In this case, a service fee will be charged.
•• When you forget the User Password, you can disable
the Supervisor Password, and the User Password is also
automatically disabled.
•• The screen images and terms may differ from actual
product depending on the computer model and driver
version.
Setting a Supervisor Password
If you set a Supervisor Password, you need to enter the password
when you turn the computer on or enter the BIOS Setup.
Setting only the Supervisor Password and User Password is not
very secure. You can use an HDD Password as well to increase the
security level.
a password, press <Enter>, re-enter the password for
3 Enter
confirmation, and press <Enter> again.
The password can be up to 8 alphanumeric characters.
Special characters are not allowed.
supervisor password has been set.
4 The
The supervisor password is required to turn the computer on
or to enter the BIOS Setup.
For some models, if the password entered message appears
in the Setup Notice window, the settings are not complete
until the <Enter> key is pressed.
Setting a Boot Password
Setting a User Password
Using the User Password, you can turn the computer on but you
cannot change the major settings of the BIOS Setup because you
cannot enter the BIOS Setup.
This helps prevent unauthorized access to the major settings in
the BIOS Setup menu.
Before configuring a user password, a supervisor password must
have been configured. Deactivating the supervisor password also
deactivates the user password.
In the Set User Password item, press <Enter> and complete the
procedures from Step 3 of Setting a Supervisor Password.
Setting Up a Boot Password
To setup a boot password, the administrator password (Set
Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled.
Once a boot password is set, you have to enter a password to boot
up the computer.
Be sure to remember the password for later use.
Chapter 4.
Settings and Upgrade
84
Setting up a Hard Disk Drive Password
(Optional)
If you set a password for a hard disk drive, it cannot be accessed
from another computer.
Press <Enter> in the Set HDD Password item and define a
password as described in Step 3 of the Setting up the Supervisor
Password.
•• The hard disk drive password setting function is not
provided for some models.
•• Changing the hard disk drive password
For security purposes, you can only change a hard disk
drive password after restarting the computer by pressing
the computer Power button.
If you cannot change the hard disk drive password or the
HDD Password Frozen message appears when entering
the BIOS Setup and then selecting Security > HDD
Password, press the Power button to turn the computer
on again.
Setting a Boot Password
Deactivating the Password
<Enter> on the password to be deactivated. For
1 Press
example, to deactivate a supervisor password in the Set
Supervisor Password item, press <Enter>.
the Enter Current Password item, enter the currently
2 Inconfigured
password and press <Enter>.
the Enter New Password item field empty, and press
3 Leave
<Enter>.
the Confirm New Password field empty, and press
4 Leave
<Enter>.
The password is deactivated.
For some models the password is only canceled if the
<Enter> key is pressed in the Setup Notice window.
Chapter 4.
Settings and Upgrade
85
Changing the Boot Priority
As an example, the procedures to change the highest boot priority
device to the hard disk drive are described below.
Chapter 4.
Settings and Upgrade
86
Press the down key (↓) to move to the SATA HDD item and
3 press
the F6 key to move up to the top item.
Boot Menu
The screen images and terms may differ from actual product
depending on the computer model and driver version.
[Boot Priority Order]
1. SATA CD
: XXXXXXXXXXXX
2. SATA HDD : XXXXXXXXXXXX
1
2 Press <Enter> on the Boot Device Priority item.
Select the Boot menu in the BIOS Setup.
3. USB CD
: N/A
4. USB FDD
: N/A
5. USB HDD
: N/A
6. NETWORK : N/A
XXXXXXXX
0WO.QEM
'PCDNG-G[RCF
6QWEJ2CF/QWUG
=1HH?
=$[0WO.QEM?
='PCDNGF?
+PVGTPCN.#0
2:'1241/
='PCDNGF?
=&KUCDNGF?
5OCTV$CVVGT[%CNKDTCVKQP
the F10 key to save the settings and exit Setup.
4 Press
The highest boot priority device is now set to the Hard Drive.
If you need to boot to DOS using a USB device, enter the
BIOS Setup, select the Advanced menu and set the Fast
BIOS Mode item to Disabled.
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed
memory or add new memory.
Chapter 4.
Settings and Upgrade
87
Adding or Replacing Memory Modules
the screw on the memory cover at the bottom of the
1 Remove
computer using a screw driver.
•• Replace or install new memory only after shutting the
computer down completely. Do not replace or install
memory when the computer is in Sleep mode.
Disconnect main power plug and remove the battery
before continuing.
•• It is recommended that you add a memory module with
the same specification (the same manufacturer and the
same capacity).
•• The images used for the illustration are of a representative
model, therefore the images may differ from the the actual
product.
Fixing Screw
a new memory module into the memory slot at an
2 Insert
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
Upgrading Memory
Chapter 4.
Settings and Upgrade
the memory module down so that it is completely fixed.
Close the memory cover and fasten the screw.
3 Push
4
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
Removing a memory module
Pull the memory module latches outward.
The memory module will pop up.
Remove the memory module out at an angle of 30 degrees.
Memory module
latches
88
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
•• Carefully read and follow the precautions printed on the
battery before using the battery.
•• Before using your computer for the first time after
purchasing it, charge the battery completely.
Chapter 4.
Settings and Upgrade
89
Installing/Removing the Battery
the system, close the LCD panel and place the
1 Shutdown
computer upside down on a flat surface.
Pull the two battery latches outwards
2 battery.
, then remove the
•• The images used for the illustration are of a representative
model, therefore the images may differ from the the actual
product.
the battery again, slide the battery into the system.
3 ToTheinstall
battery latches move inwards and fix the battery
automatically.
Check if the battery latch has been moved inwards.
Battery
Chapter 4.
Settings and Upgrade
Charging the Battery
90
Measuring the Remaining Battery Charge
the battery and connect the AC adapter to the DC-in
1 Attach
jack of the computer.
The battery will then start charging.
You can view the battery charge status by completing the
following procedures.
Confirming the battery charge in the Taskbar
Disconnect the AC adapter and move the mouse cursor over
the battery icon in the system tray of the Taskbar to confirm the
remaining battery charge.
2 When charging is complete, the Charge LED turns green.
Status
Charging
Charge LED
Orange
Charging complete
Green
AC adapter not
connected
Off
Battery Usage Time Information
A battery is an expendable supply, so when using it over a long
time, the capacity/battery life is shortened. If the battery life is
reduced to under half of its initial time, we recommend purchasing
a new battery.
When not using the battery for a long time, store the battery after
charging it to 30-40% of its capacity. This extends the battery life
time.
áᔪ
Battery
Chapter 4.
áᔪ
Settings and Upgrade
91
Ŗᮁ
Using the power management program
Extending the Battery Usage Time
᜽᯲
This program helps you use the battery more efficiently
and supports the power mode optimized for the operating
᜽᯲
environment.
Decreasing the LCD Brightness
ᰆ⊹
1
Click the Charms menu > Settings
Adjustment icon
.
> Screen
ᖅᱶ
the brightness with the screen brightness control bar.
2 Adjust
The battery life will be extended.
⦽
Ŗᮁ
ᰆ⊹
1
Click Charms menu on the Desktop > Settings
>
Control Panel > Hardware and Sound > Powerᖅᱶ
Options.
Alternatively, right-click the power measuring device icon
in the notification area of the taskbar and select Power
Options.
2 If the following screen appears, select one of the modes.
Battery
Chapter 4.
Settings and Upgrade
Extending the Battery Life (Optional)
In the Settings program, click Power Management and set the
Battery Life Extender to ON or OFF.
OFF
This mode maintains 100% of the battery
charge when using the computer on AC power.
In this case, although the battery use time
increases, the battery life is reduced.
ON
This mode maintains 80% of the battery charge
when using the computer on AC power. In this
case, although the battery use time decreases,
the battery life is extended.
Alternatively, to extend the battery life
Press the F2 key when the Samsung logo appears in the
booting sequence to enter the BIOS Setup, select Advanced
> Battery Life Cycle Extension, and set it to Enable.
Then you can use the battery life cycle extension mode.
92
Battery
Using the Battery Calibration Function
Chapter 4.
Settings and Upgrade
93
to the Boot > Smart Battery Calibration item using
3 Move
the direction keys and press <Enter>.
XXXXXXXX
When charging/discharging the battery repeatedly for a short time
only, the battery usage time may be reduced by the difference
between the actual battery charge and the remaining charge
display.
In this case, the actual battery charge and the remaining charge
display will be the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
The screen images and terms may differ from actual product
depending on the computer model and driver version.
0WO.QEM
'PCDNG-G[RCF
6QWEJ2CF/QWUG
=1HH?
=$[0WO.QEM?
='PCDNGF?
+PVGTPCN.#0
2:'1241/
='PCDNGF?
=&KUCDNGF?
5OCTV$CVVGT[%CNKDTCVKQP
Yes in the Battery Calibration Confirmation
4 Highlight
window and press <Enter>.
1
The Battery Calibration function is activated and the battery
is forcefully discharged. To stop the operation, press the
<Esc> button.
2
This operation requires 3~5 hours depending on the battery
capacity and the remaining battery charge.
Disconnect the AC power adapter after turning off the
computer.
Turn the computer back on, and press the F2 key to enter the
Setup screen.
Chapter 5.
Troubleshooting
Recovering/Backing up the Computer (Optional)
95
Reinstalling Windows (Optional)
102
Q&A
105
Recovering/Backing up the Computer (Optional)
If a problem occurs with your computer, Recovery (recovery
program) allows you to easily restore your computer to the default
(factory) settings. Alternatively, you can back up your computer so
that you can restore it to your preferred state at any time.
Recovery Introduction
Recover
Back Up
Function
Chapter 5.
Troubleshooting
Description
Recover
Restores the entire Windows drive.
Back Up
You can back up your entire Windows drive.
• Recovery may not be provided or may be a different
version depending on the model.
• For models whose hard disk or SSD capacity is less than 64
GB, the Recovery program is not provided.
• The instructions are provided based on Recovery 6.0
version. Some functions may differ slightly or be excluded
depending on the version. Refer to the program's Help
section for more information.
• An ODD (CD/DVD drive, etc.) is not supported by the
Recovery program.
Help
95
Recovering/Backing up the Computer (Optional)
Chapter 5.
Troubleshooting
96
Recovering
You can recover your computer to the default (factory) status
when your computer does not boot up.
1
Factory Default
Point
Restores your
computer to the
factory default
status.
- If Windows does not start
Turn your computer on and press the F4 key.
Run recovery mode.
User's Backup
Point
- If Windows is run
From the Start Screen, right-click any area and select All
in the bottom right corner. Then, click Recovery.
Apps
2
If the program is running for the first time, you need to agree
to the User Agreement.
3
If the initial menu screen appears, click Recover.
Select a recovery point and click Recover.
If you set the User Data Maintenance to ON, the computer is
restored while maintaining the current user data.
Restores your
computer to a
previously backed
up status.
4
Recover is performed based on the screen instructions.
If the recover is completed, you can use your computer
normally.
Recovering/Backing up the Computer (Optional)
Chapter 5.
Troubleshooting
97
Recovering after a Backup
You can recover your computer after you have backed up your
computer to a separate drive or external storage device.
Backing up
1
2
Select the drive
to save to.
To back up your computer to an external storage device,
connect the external storage device and select the relevant
drive.
Click Backup in the Recovery Home screen.
Select the drive to save and click Backup.
You cannot select a DVD drive.
3
The backup process is performed based on the instructions.
Recovering/Backing up the Computer (Optional)
Recovering
You can recover your computer using the backup from the above
process.
1
If the backup image is saved to an external storage device,
connect the device.
2
Start Recovery and click Recover.
3
Select a Recover Option and click Recover.
Select a point to recover.
4
Chapter 5.
Troubleshooting
98
The recover is performed based on the screen instructions.
You can use your computer after the recover is completed.
Recovering/Backing up the Computer (Optional)
Chapter 5.
Troubleshooting
99
To copy the external storage disk
When you replace a storage device such as the HDD, SSD, etc.
(hereafter referred to as a hard disk) built into your computer, you
can move your existing data to the new storage device easily and
safely.
The new storage device must have sufficient capacity to save
your existing data.
You need to purchase an external hard USB connector
separately to connect the hard disk and your computer.
4
1
You need to purchase an external hard USB connector
separately to connect the hard disk and your computer.
5
2
Start Recovery and click Disk copy.
3
Select an option in Disk recovery Point and click Disk copy.
The data on the current hard disk is saved to the new hard
disk.
If the data is completely saved, open the hard disk cover at
the bottom of your computer and replace the existing hard
disk with the new one.
If you cannot open the cover at the bottom of the computer,
contact the Samsung Service Center to request assistance.
In this case, you may be charged for the relevant service.
6
Your computer is now equipped with a new hard disk.
You can use your computer with a larger hard disk capacity
with the same configuration as the old one.
Recovering/Backing up the Computer (Optional)
Export Disk Image Function
If you frequently recover your computer to the default (factory)
settings, you can conveniently recover your computer after
exporting the default (factory) status disk image to an external
storage device.
the external storage device, and then select a drive
1 Connect
to save to.
2 Click Run.
the process by following the instructions to
3 Perform
completely save the default (factory) status disk image to the
external storage device.
Now disconnect the saved external storage device and store
it separately.
your computer needs to be restored to the default (factory)
4 Ifsettings,
connect the external storage device with the saved
image.
Chapter 5.
Troubleshooting
Recovery and click Recover. Select Factory Default
5 Start
Point and click Recover. The Recover process is started.
When the recover process is finished, you can use your
computer with the default (factory) settings.
100
Recovering/Backing up the Computer (Optional)
Computer Recovery Function in Windows 8
If you need to install Windows 8 again due to an unexpected error,
use the following function.
For models of which the storage device capacity is less than
SSD 64 GB, use the system recovery feature provided by
Windows instead of the Recovery program.
1
Click the Charms menu > Settings > Change PC Settings >
General.
the Start button for PC Recovery or Remove All Items
2 Click
and Reinstall Windows.
PC Recovery
If your PC does not work properly, you
can restore your PC while keeping your
media files such as your photo, video and
music files, etc. as well as your personal
documents.
Remove All Items If you want to return your PC to the default
and Reinstall settings, or start from scratch, you can
Windows
reset your PC to the factory default.
Chapter 5.
Troubleshooting
101
You should back up the files in the following folders
before using the PC Recovery function since these files
are not kept.
\Windows, \Program files, \Program files(x86), \ProgramData,
OEM Folder (ex) c:\samsung), \User\<user name>\AppData
the onscreen instructions to proceed with the
3 Follow
recovery process.
If the recovery is complete, you can use your computer
normally.
Reinstalling Windows (Optional)
You can reinstall Windows using the SYSTEM RECOVERY MEDIA
for Windows when Windows is no longer working properly.
(For models supplied with a SYSTEM RECOVERY MEDIA.)
For models supplied with the Samsung Recovery Solution, you
can reinstall Windows using the Samsung Recovery
Solution.
These descriptions are for Windows 7/8 and Windows Vista and for
supported models only.
•• A SYSTEM RECOVERY MEDIA may not be supplied
depending on your computer model.
•• If you cannot start Windows, or if you want to delete
all existing data and reinstall Windows, install Windows
according to the descriptions in [Reinstalling when
Windows does not start].
•• Some pictures may differ from actual product.
•• These descriptions may differ depending on the operating
system.
•• Reinstalling Windows may delete data (files and programs)
saved on the hard disk drive.
•• Make sure to backup all important data. Samsung
Electronics shall not be held liable for any loss of data.
Chapter 5.
Troubleshooting
102
Reinstalling in Windows
1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive.
the Select Windows Installation window appears, click
2 IfInstall
Now. When the Select Update window appears, click
on the relevant item.
•• If you select Go online to get the latest updates for
installation in the Select Update window, the latest
updates are installed and Step 4 follows. At this time, the
computer must be connected to the Internet.
•• For Windows 7/8, the screen asking for the operating
system to be installed may appear depending on the
version. If you click the Next button, the screen of Step
3appears.
the User Agreement screen appears, select I accept the
3 Iflicense
terms and then click Next.
For Windows 7/8, this screen may not appear depending on
the version.
Reinstalling Windows (Optional)
Chapter 5.
Troubleshooting
103
a window appears asking for the location to install the
4 The following window appears, select an installation option. 5 When
operating system to, select a disk drive partition and click the
Next button.
you click Custom, the procedures from Step 5 continue
Ifsequentially.
If you click Upgrade, the procedures from Step 6 continue
sequentially.
•• For Windows 7/8, this screen may not appear depending
on the version.
•• Custom
Select this option to Reinstall Windows. You have to
reinstall all necessary device drivers and programs after
the Custom installation. In addition, unnecessary folders
and files may remain on the hard disk drives after the
installation (e.g. C:\ Windows.old, etc.).
•• Upgrade
Select this option to Upgrade Windows while maintaining
current files, configurations and programs. Although you
therefore do not need to reinstall the device drivers and
programs, some programs may not work properly after the
upgrade.
Drive D includes an area to save the backup image used by
Samsung Recovery Solution. Installing Windows to drive C is
recommended.
When previous Windows installation files are in the selected
partition, a message appears informing you that the files and
folders will be moved to the Windows. old folder. Click the
OK button.
Windows installation continues.
6 The
The computer will restart 3 times during the installation.
If the Press any key to boot from CD or DVD... message
appears after a restart, do not press any button.
a user according to the instructions on the Windows
7 Register
screen.
the registration is complete, the Windows Desktop
8 When
screen appears.
For a smooth computer operation, installing the necessary
software installation is recommended.
Reinstalling Windows (Optional)
Reinstalling when Windows does not start
When Windows does not start, boot up with the SYSTEM
RECOVERY MEDIA and from there you can reinstall Windows.
the SYSTEM RECOVERY MEDIA into the DVD drive
1 Insert
and restart the computer.
the Press any key to boot from CD or DVD... message
2 Ifappears
while booting, press any key on the keyboard.
Chapter 5.
Troubleshooting
104
For Windows 7/8, this screen may not appear depending on
the version.
the window asking for the installation type appears,
6 When
click Custom.
For Windows 7/8, this screen may not appear depending on
the version.
a window appears asking for the location to install the
7 When
operating system to, select the partition of the disk drive and
then click the Next button.
a while, the Options windows such as Language, Time,
3 After
Keyboard, etc. appear. Confirm the settings and click the
Drive D includes an area to save the backup image used by
Samsung Recovery Solution. Installing Windows to drive C is
recommended.
the Select Windows Installation window appears, click
4 IfInstall
Now.
•• A If you click Drive Options (Advanced), you can delete,
format, create or expand a partition. Click on a function
and proceed according to the instructions on the screen.
Next button.
For Windows 7/8, the screen asking for the operating system
to be installed may appear depending on the version. If you
click the Next button, the screen of Step 5 appears.
the User Agreement screen appears, select I accept the
5 Iflicense
terms and then click Next.
•• When previous Windows installation files are in the
selected partition, a message appears informing you that
the files and folders will be moved to the Windows.old
folder. Click the OK button.
subsequent steps are the same as those from Step 7 of
8 The
Installing in Windows.
Q&A
You can look for potential problems that may occur with the
system and view the relevant solutions. Also, you may look up any
reference(s) required while operating the computer.
Recovery Related
Q1
Chapter 5.
Troubleshooting
Q2
105
The capacity representation of the hard disk
drive(HDD) in Windows is different from the product
specifications.
A
The capacity of the storage device (HDD) of the
manufacturer is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the
storage device capacity assuming that 1KB=1,024 Bytes,
and therefore the capacity representation of the HDD in
Windows is smaller than the actual capacity.
What is a Recovery Area?
A
Samsung computers have an additional partition to recover
computers or save backup files. (Only for models with the
Recovery.)
This partition is called a Recovery Area and it includes a
recovery image that comprises of the OS and application
programs.
The capacity representation in Windows may be smaller
than the actual capacity because some programs occupy a
certain area of the HDD outside of Windows.
For models with Recovery, the HDD capacity representation
in Windows may be smaller than the actual capacity because
Recovery uses a hidden area of about 5~20GB of the HDD
to save the recovery image, and that hidden area is not
counted towards the total size available to Windows.
The size of Recovery varies by models because of the
different size of applied programs.
Q&A
Q3
A
Q4
Chapter 5.
Troubleshooting
Windows 8 Related
What is a recovery image?
This refers to the computer status (including operating
system, specific driver(s), software(s), etc.) which is converted
to a data image. It is required to recover your computer and
is embedded in the computer's hard disk. However, this is
not provided for storage devices where the capacity is less
than 64 GB due to the small capacity.
How can I restore a computer that does not have the
Recovery program?
106
Q1
I cannot find the Start button on the Desktop.
A
There's no Start button in Windows 8.
You can use the Control Panel, PC-running menu(s), etc. by
activating the Charms menu.
Q2
I cannot find the computer's Shutdown button.
A
You can restore the computer using the system recovery
function provided by Windows.
A
Click the Charms menu > Settings > Power to display the
Power Options menu.
Refer to the Restore Functionality item in the Help section
for more details.
Click System Shutdown.
Q3
A
The App disappeared in the Start screen.
Click the Charms menu > Search to display all installed
Apps. Right-click over the corresponding App to select in a
Tile in the Start Screen.
Q&A
Q4
A
Since I'm familiar with Windows 7, I would like the
Desktop screen to appear as it does in Windows 7.
Currently, there is no way to set the Desktop to appear by
default.
Press the Windows key + D key simultaneously to reveal
the Desktop when the Start screen appears. This is currently
the only workaround.
Q5
A
Chapter 5.
Troubleshooting
Q7
Run your driver installation file and follow the corresponding
instructions. You can install it in the same method as the
existing OS.
Click Charms menu > Settings > Change PC Settings >
Personalization. You can set the OS settings such as the
screen design, etc.
To configure your computer in detail, click the Charms
menu in Desktop > Settings > Control Panel.
You can configure your computer in the same way as
existing Windows systems.
Q8
A
Refer to your printer manual for detailed instructions for
each model.
How can I uninstall the driver?
A
On the Desktop, click Charms menu > Settings > Control
Panel > Programs and Features.
Click the program. Then click uninstall.
Active X does not run in Internet Explorer on the Start
screen.
Since Internet Explorer on the Start screen complies with the
HTML5 web standards, it does not support Active X. However,
Internet Explorer on the Desktop supports Active X.
Q6
How can I change the screen settings, environment
settings, type size, color, and so on?
A
How can I install a printer driver?
107
► How to activate Active X:
If you right-click over the Internet Explorer, the following
button and click View on the
window appears. Press the
Desktop. Active X is now enabled.
Q&A
Q9
I want to remove the pre-installed Windows 8
operating system and install a different OS.
A
If you want to install a different operating system on your
PC, you need to change the BIOS settings first.
For more information, visit http://www.samsung.com and
go to Customer Support > Troubleshooting. Search for
Windows 8 and look through the list of search results for the
relevant issue.
Chapter 5.
Troubleshooting
108
Display Related
Q1
A
The Desktop displayed on the TV after connecting via
the HDMI port does not fit the screen.
Go to the Graphics Control Panel to adjust the screen
settings.
► For Intel graphics cards
Right-click over the Desktop and go to Graphics Properties
> Display > General. Adjust the Horizontal Ratio and
Vertical Ratio settings to fit your screen and click OK.
► For AMD graphics cards
1. Right-click over the Desktop and select Graphics
Properties > Desktop and Display > My Digital Flat
Panel > Expansion Options (Digital Flat Panel).
2. Adjust the control bar to fit the TV corners and click Apply.
Q&A
Sound Related
Q1
I cannot hear any sound from the TV after connecting
via the HDMI port.
A
1. Right-click over the taskbar on the Desktop and click Play
Device.
2. Change the option to Digital Audio (HDMI), HDMI device,
HDMI Output or another option and click Set as Default.
Then click OK.
Chapter 5.
Troubleshooting
109
Others
Q1
A
You can configure your computer in the same way as
existing Windows systems.
If you want to start your computer in DOS via a USB device,
set the Fast BIOS Mode item in the Advanced menu in the
BIOS Setup to Disabled before using this feature.
Chapter 6.
Appendix
Important Safety Information
111
Replacement Parts and Accessories
113
Regulatory Compliance Statements
115
WEEE Symbol Information
131
Samsung Packaging Take-Back Program
132
Product Specifications
133
Glossary
135
Index
139
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest standards
for safety of information technology equipment. However, to
ensure safe use of this product, it is important that the safety
instructions marked on the product and in the documentation are
followed.
Always follow these instructions to help guard against
personal injury and damage to your system.
Setting Up your System
•• Read and follow all instructions marked on the product and in
the documentation before you operate your system. Retain all
safety and operating instructions for future use.
•• Do not use this product near water or a heat source such as a
radiator.
Chapter 6
Appendix
111
•• If your computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
•• Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when you set up your work area. Never insert
objects of any kind into the computer ventilation openings.
•• Ensure that the fan vents on the bottom of the casing are clear
at all times. Do not place the computer on a soft surface, doing
so will block the bottom vents.
•• If you use an extension cord with this system, make sure that
the total power rating on the products plugged into the
extension cord does not exceed the extension cord power
rating.
•• For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause disturbing reflections from surrounding light and bright
surfaces.
•• Set up the system on a stable work surface.
•• The product should be operated only with the type of power
source indicated on the rating label.
•• Ensure that the electrical outlet you are using to power your
equipment is easily accessible in case of fire or short circuit.
NB Ver 3.1
Important Safety Information
Chapter 6
Appendix
112
Care During Use
The Instruction On Safety Operation of NotePC
•• Do not walk on the power cord or allow anything to rest on it.
1. When installing and operating devices please refer to safety
requirements in the user guide.
•• Do not spill anything on the system. The best way to avoid
spills is to not eat or drink near your system.
•• Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement insure
that a qualified technician performs the task.
•• When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
•• Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
2. Devices can be used only with the equipment specified in the
technical specifications of the devices.
3. If any smell of burning or smoke is detected from the computer
the unit should be switched off and battery removed. The unit
should be checked by a qualified technician before reuse.
4. Service and repair of devices should be carried out by
authorized service centers.
5. Do not allow your portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by
manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and dental
facilities, oxygen rich environments, or industrial areas.
Chapter 6
Appendix
113
Laser Safety
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
•• Laser Safety Note:
Battery Disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Contact the Samsung Helpline for information on how to dispose
of batteries that you cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure
of a CD or DVD drive.
•• Class 1M laser radiation when operating part is open.
Do not view directly with optical instruments.
•• Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Replacement Parts and Accessories
Connect and Disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Do not unplug the power cord by pulling the cable only.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
Chapter 6
Appendix
114
General Requirements
The requirements listed below are applicable to all countries:
•• All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
•• The power cord set must have a minimum current capacity
of 7 A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system. (USA ONLY)
•• The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector,
for mating with appliance inlet on the computer.
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. The following
section is a general overview of considerations while operating a
wireless device.
Additional limitations, cautions, and concerns for specific countries
are listed in the specific country sections (or country group
sections). The wireless devices in your system are only qualified for
use in the countries identified by the Radio Approval Marks on the
system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval
agency for requirements. Wireless devices are closely regulated
and use may not be allowed.
The RF field strength of the wireless device or devices that may
be embedded in your notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Chapter 6
Appendix
115
• Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wifi) and
Bluetooth communication devices are examples of devices
that provide wireless communication.
• In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable
gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When
in environments where you are uncertain of the sanction
to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
• Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
• If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless
all covers and shields are in place and the system is fully
assembled.
Regulatory Compliance Statements
• Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Please contact manufacturer for
service.
• Only use drivers approved for the country in which
the device will be used. See the manufacturer System
Restoration Kit, or contact manufacturer Technical Support
for additional information.
Chapter 6
Appendix
116
United States of America
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in an
explosive environment unless the device has been modified
to be qualified for such use.
Regulatory Compliance Statements
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne operation
of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes
or modification to said product not expressly approved by
Intel could void the user’s authority to operate this device.
Chapter 6
Appendix
117
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause
harmful interference. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and
receiver.
•• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician
for help.
Regulatory Compliance Statements
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Intentional emitter per FCC Part 15
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
Chapter 6
Appendix
118
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and /or damage this device.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify
them in any way.
Modification to a wireless device will void the authorization
to use it. Contact manufacturer for service.
Regulatory Compliance Statements
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Chapter 6
Appendix
119
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
This product can be embedded a radio transmitter and receiver.
It is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two
expert organizations, the National Council on Radiation Protection
and Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the recommendations
were developed by scientific and engineering experts drawn from
industry, government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
Before a new model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC. Tests for each model are
performed in positions and locations (e.g. at the bottom on the
body) as required by the FCC.
The exposure limit set by the FCC for wireless devices employs a
unit of measurement known as the Specific Absorption Rate (SAR).
The SAR is a measure of the rate of absorption of RF energy by the
human body expressed in units of watts per kilogram (W/kg). The
FCC requires wireless devices to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates
a substantial margin of safety to give additional protection to the
public and to account for any variations in measurements.
SAR information on this and other model can be viewed on-line
at http://www.fcc.gov/oet/ea/fccid/. This site uses this product FCC
ID number on the outside of the product. Sometimes it may be
necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular product, follow the
instructions on the website and it should provide values for typical
or maximum SAR for a particular product.
SAR tests are conducted using standard operating positions
accepted by the FCC with the wireless transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
For body worn operation, this model has been tested and meets
the FCC RF exposure guidelines when used with a Samsung
accessory designated for this product. Non-compliance with the
above restrictions may result in violation of FCC RF exposure
guidelines.
Regulatory Compliance Statements
FCC Part 68 (If fitted with a modem device.)
This equipment complies with part of the FCC rules. On the
back of this equipment is a label that contains, among other
information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information
must be provided to the telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected
to the telephone network or promises wiring using a compatible
modular jack which is Part 68 compliant. See Installation
Instructions for details.
The REN is used to determine the quantity of devices which may
be connected to telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum REN for
the calling area.
If the terminal equipment causes harm to the telephone network,
the Telephone Company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
Chapter 6
Appendix
120
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone
company will provide advanced notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (Modem) for repair
or warranty information, please contact your local distributor.
If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the
equipment until the problem is resolved.
The user must use the accessories and cables supplied by the
manufacturer to get optimum performance from the product.
No repairs may be done by the customer.
This equipment cannot be used on public coin phone service
provided by the telephone company. Connection to party line
service is subject to state tariffs.
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including fax machines, to send any message unless such
message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business
or other entity, or other individual sending the message and the
telephone number of the sending machine or such business, other
entity, or individual. (The telephone number provided may not
be any number for which charges exceed local or long-distance
transmission charges.)
In order to program this information into your fax machine, refer
to your communications software user manual.
Regulatory Compliance Statements
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limitesapplicables aux appareils
numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par Industrie Canada.
Intentional Emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this
device.”
L‘ utilisation de ce dispositif est autorisée seulement aux
conditions suivantes : (1) il ne doit pas produire de brouillage et (2)
l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
Chapter 6
Appendix
121
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service
faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait
etre place loin des fenetres afin de Fournier un ecram de blindage
maximal. Si le matriel (ou son antenne d’emission) est installe a
l’exterieur, il doit faire l’objet d’une licence.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
Regulatory Compliance Statements
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15- to 5.25-GHz frequency
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the
potential for harmful interference to co-channel mobile satellite
systems. High power radar is allocated as the primary user of the
5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations
can cause interference with and/or damage to this device.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this device
is intended to be operated indoors and away from windows
to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Contact manufacturer for service.
Chapter 6
Appendix
122
(Si l’appareil est équipé d’une bande 2,4 G ou 5 G)
Des dispositifs de basse puissance, de type radio LAN
(périphériques de communication sans fil par radiofréquence
RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peutêtre intégrés dans votre appareil. Cette section est applicable
uniquement si ces dispositifs sont présents. Consultez l’étiquette
du système pour vérifiez la présence de dispositifs sans fil.
Les dispositifs sans fil qui peuvent être intégrés dans votre système
sont uniquement aptes pour une utilisation au Canada si l’étiquette
du système présente un nombre d’identification d’Industrie
Canada.
En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne
peut être utilisé qu’à l’intérieur en raison de son fonctionnement
dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie
Canada exige l’utilisation de ce produit à l’intérieur pour une
plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire
les éventuelles interférences nuisibles avec les systèmes mobiles
par satellite du même canal. Le radar de grande puissance est
considéré comme l’utilisateur principal des bandes de 5,25 à 5,35
GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer
des interférences avec ce périphérique et/ou l’endommager.
Le gain d’antenne maximum autorisé avec ce périphérique est
de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des
fréquences de 5,25 à 5,35 GHz et de 5,725 à 5,85 GHz dans un
fonctionnement point à point.
La sortie de puissance du dispositif sans fil (ou des dispositifs) qui
peut être intégré dans votre système est bien inférieure aux limites
d’exposition de RF établies par Industrie Canada.
Regulatory Compliance Statements
Son utilisation est soumise aux deux conditions suivantes : 1) ce
dispositif ne peut pas provoquer d’interférences nuisibles et 2
2) ce dispositif doit accepter toute interférence reçue, y compris
les interférences qui peuvent provoquer des anomalies dans le
système.
Afin de prévenir des interférences de radio au service
autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et
éloigné des fenêtres pour fournir une protection maximum.
Un équipement (ou son antenne de transmission) qui est
installé à l’extérieur est sujet à une autorisation.
Les dispositifs sans fil ne peuvent pas être réparés par
l’utilisateur. Ne les modifiez en aucune façon. La modification
d’un dispositif sans fil annulera votre autorisation à son
utilisation. Contactez le fabricant pour la réparation.
Chapter 6
Appendix
123
Telecommunications per DOC notice
(for products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operation, and safety
requirements. The Department does not guarantee the equipment
will operate to the users’ satisfaction.
Before installing this equipment, users should make sure that
it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some
cases, the inside wiring associated with a single-line individual
service may be extended by means of a certified connector
assembly. The customer should be aware that compliance with
the above conditions may not prevent degradation of service in
some situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should make sure, for their own protection, that the
electrical ground connections of the power utility, telephone lines,
and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Regulatory Compliance Statements
To avoid electrical shock or equipment malfunction do not
attempt to make electrical ground connections by yourself.
Contact the appropriate inspection authority or an electrician,
as appropriate.
The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number
of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed 5.
Déclarations sur les télécommunications selon DOC
(pour des produits munis d’un modem homologué par
la IC)
L’étiquette d’Industrie Canada identifie un équipement autorisé.
Cette autorisation signifie que l’équipement satisfait certaines
exigences pour la sécurité, fonctionnement et protection des
réseaux téléphoniques. Le département ne garantie pas que
l’équipement fonctionne comme le désirerait l’utilisateur.
Avant d’installer l’équipement, les utilisateurs doivent s’assurer
que leur connexion aux installations de la compagnie de
télécommunication locale soit permise.
L’équipement doit être également installé selon une méthode
acceptable de connexion. Dans certains cas, l’installation
électrique associée à un service de ligne individuel peut être
rallongé par un connecteur homologué. Le client doit savoir que
Chapter 6
Appendix
124
la conformité aux conditions précédentes ne garantit pas un
fonctionnement parfait dans toutes les situations.
Les réparations de l’équipement homologué doivent être
effectuées dans les installations de maintenance canadiennes
autorisées par le fournisseur. Les réparations ou modifications
effectuées par l’utilisateur sur cet équipement, ou anomalies
de l’équipement, peuvent faire que la compagnie de
télécommunication demande la déconnexion de l’équipement.
Les utilisateurs doivent s’assurer, pour leur propre protection, que
les raccordements électriques à la terre, les lignes de téléphone
et l’infrastructure de la conduite d’eau, si il y en a, sont connectés
ensemble. Cette précaution peut être particulièrement importante
dans les zones rurales.
Afin d’éviter une électrocution ou le disfonctionnement
de l’équipement, n’essayez pas de faire vous-même les
raccordements électriques à la terre. Contactez l’autorité
inspectrice adéquate ou un électricien, selon il conviendra.
Le Numéro d’équivalence d’appel (REN) attribué à chaque
dispositif terminal fourni une indication du nombre maximum
de terminales qui peuvent être connectées à une interface
téléphonique. Le bout d’une interface peut contenir n’importe
quelle combinaison de dispositifs sujets uniquement à la
condition que le total des numéros d’équivalence d’appel de tous
les dispositifs ne dépasse pas 5.
Regulatory Compliance Statements
Brazil
Chapter 6
Appendix
125
European Directives
Este produto esta homologado pela ANATEL, de acordo com
os procedimentos regulamentados pela Resolucao 242/2000, e
atende aos requisitos tecnicos aplicados.
This Information Technology Equipment has been tested and
found to comply with the following European directives:
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
•• Low Voltage Directive 2006/95/EC
•• EMC Directive 2004/108/EC
•• R&TTE Directive 1999/5/EC
Manufacturer Information
Samsung Electronics Co., Ltd.
European Union
European Union CE Marking and Compliance Notices
Products intended for sale within the European Union are marked
with the Conformité Européene (CE) Marking, which indicates
compliance with the applicable Directives and European standards
and amendments identified below. This equipment also carries
the Class 2 identifier.
The following information is only applicable to systems labeled
.
with the CE mark
416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
Tel: +86-512-6253-8988
For the web or the phone number of Samsung Service Centre, see
the Warranty or contact the retailer where you purchased your
product.
Regulatory Compliance Statements
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4GHz/5GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
Chapter 6
Appendix
EU R&TTE Compliance Statements
Česky
[Czech]
Samsung tímto prohlašuje, že tento Notebook
PC je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Samsung erklærer herved, at
følgende udstyr Notebook PC overholder de
væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt Samsung, dass sich das Gerät
Notebook PC in Übereinstimmung mit den
grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Samsung seadme
Notebook PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
Hereby, Samsung, declares that this Notebook
PC is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente Samsung declara
que el Notebook PC cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
The low band 5.15 - 5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
126
Regulatory Compliance Statements
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ
Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Samsung déclare que l’appareil
Notebook PC est conforme aux exigences
essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Samsung dichiara che questo
Notebook PC è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Samsung deklarē, ka Notebook PC atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Šiuo Samsung deklaruoja, kad šis Notebook PC
Lietuvių
atitinka esminius reikalavimus ir kitas 1999/5/
[Lithuanian]
EB Direktyvos nuostatas.
Nederlands
[Dutch]
Malti
[Maltese]
Hierbij verklaart Samsung dat het toestel
Notebook PC in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Samsung, jiddikjara li dan
Notebook PC jikkonforma mal-ħtiāijiet
essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/EC.
Chapter 6
Appendix
127
Alulírott, Samsung nyilatkozom, hogy a
Magyar
Notebook PC megfelel a vonatkozó alapvetõ
[Hungarian] követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Polski
[Polish]
Niniejszym Samsung oświadcza, Ŝe Notebook
PC jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Samsung declara que este Notebook PC está
Português
conforme com os requisitos essenciais e outras
[Portuguese]
disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu
z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky
[Slovak]
Samsung týmto vyhlasuje, že Notebook PC
spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Samsung vakuuttaa täten että Notebook
PC tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Samsung att denna Notebook
PC står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/
EG.
Regulatory Compliance Statements
Íslenska
[Icelandic]
Hér með lýsir Samsung yfir því að Notebook PC
er í samræmi við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun 1999/5/EC.
Samsung erklærer herved at utstyret Notebook
Norsk
PC er i samsvar med de grunnleggende krav og
[Norwegian]
øvrige relevante krav i direktiv 1999/5/EF.
Türkiye
[Türkçe]
Bu belge ile, Samsung bu Notebook PC’nin
1999/5/EC Yönetmeliğinin temel gerekliliklerine
ve ilgili hükümlerine uygun olduğunu beyan
eder.
To view the EU Declaration of Conformity for this product (in
English only), go to: http://www.samsung.com/uk/support/
download/supportDownMain.do then search the model number
of the product.
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor.
Chapter 6
Appendix
128
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g
wireless LAN devices may not yet be harmonized in all
countries, 802.11b/802.11g products are designed for use
only in specific countries or regions, and are not allowed
to be operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible for ensuring
that the products are used only in the countries or regions
for which they were intended and for verifying that they
are configured with the correct selection of frequency and
channel for the country or region of use. Any deviation from
permissible settings and restrictions in the country or region
of use could be an infringement of local law and may be
punished as such.
Regulatory Compliance Statements
Chapter 6
Appendix
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
France
General
2.400 - 2.454 GHz (channels 1 to 7) for outdoor use.
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
The low band 5.15 - 5.35 GHz is for indoor use only.
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.4835 GHz for indoor and outdoor use.
For Reunion, Guyane:
Belgium
2.400 - 2.4835 GHz for indoor use.
The product may be used outdoors, but for outdoor transmissions
over a distance of 300m or more, a license from the BIPT is
required.
2.420 - 2.4835 GHz for outdoor use (channels 5 to 13)
This restriction should be indicated in the manual as follows:
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire
pour une distance de moins de 300m. Pour une distance
supérieure à 300m un enregistrement auprès de l’IBPT est requise.
Pour une utilisation publique à l’extérieur de bâtiments, une
licence de l’IBPT est requise. Pour les enregistrements et licences,
veuillez contacter l’IBPT.
The low band 5.15 - 5.35 GHz is for indoor use only.
129
Regulatory Compliance Statements
European Telecommunication Information
(for products fitted with EU-approved modems)
Marking by the symbol
indicates compliance of this equipment
to the Radio and Telecom Terminal Equipment Directive 1999/5/
EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
CTR 21 - Attachment requirements for pan-European approval for
connection to the analogue Public Switched Telephone Networks
(PSTNs) of TE (excluding TE supporting voice telephony services) in
which network addressing, if provided, is by means of Dual Tone
Multi-Frequency (DTMF) signaling.
Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of
the DTMF signaling is subject to regulatory requirements for
correct operation.
It is therefore strongly recommended that the equipment
is set to use DTMF signaling for access to public or private
emergency services. DTMF signaling also provides faster call
setup.
Chapter 6
Appendix
130
This equipment has been approved to Council Decision 98/482/
EEC - “CTR 21” for Pan-European single terminal connection to the
Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself,
give an unconditional assurance of successful operation on every
PSTN termination point. In the event of problems, you should
contact manufacturer Technical Support.
RTC CAUTION
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Discard used batteries according to the
Manufacturer’s instruction.
Attention: Danger d’explosion si les piles sont mal palcées.
Remplacez les piles usagées uniquement par des piles de type
identique ou équivalent recommandees par is fabriquant. Otez les
piles usagées selon les instructions du fabriquant.
WEEE Symbol Information
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
Chapter 6
Appendix
131
Correct disposal of batteries in this product
Pb
(Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
India Only
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
To protect natural resources and to promote material re-use, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
For battery recycling go to call2recycle.org; or call 1-877-723-1297
Samsung Packaging Take-Back Program
In partnering with select recyclers, Samsung offers packaging
take-back at no cost to you.
Simply call the following number for the locations nearest you.
CRT Processing, LLC
(877) 278-0799
Kathy Severson – Logistics contact
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
Chapter 6
Appendix
132
Product Specifications
The system specifications may differ depending on the derived
models.
For detailed system specifications, refer to the product catalogue.
CPU
(Optional)
Intel Celeron/Pentium Processor
Intel Core i3/i5/i7 Processor
AMD E1/E2/A4/A6/A8/A10 Processor
Chapter 6
Appendix
Operating
Environment
Temperature: -5~40°C for storage,
10~35°C when operating
Humidity: 5~90% for storage,
20~80% when operating
AC/DC Rating
(Optional)
Input: 100-240VAC, 50/60Hz,
Output: 19VDC 3.16A, 19VDC 4.74A
PC Rating
(Optional)
19VDC 3.16A (60W) / 19VDC 4.74A (90W)
133
Main
Memory
Memory type: DDR3 SODIMM
Main Chipset
(Optional)
Intel HM70/HM76
AMD A68M/A70M
Storage
Device
•• Optional components may not be provided or different
components may be provided depending on the computer
model.
9.5mmH SATA2
Graphics
Intel® HD Graphics
Intel® HD Graphics 3000 (Internal)
Intel® HD Graphics 4000 (Internal)
AMD Radeon™ HD 7420G Graphics (Internal)
AMD Radeon™ HD 7520G Graphics (Internal)
AMD Radeon™ HD 7640G Graphics (Internal)
AMD Radeon™ HD 7660G Graphics (Internal)
AMD Radeon™ HD 7470M Graphics
AMD Radeon™ HD 7670M Graphics
AMD Radeon™ HD 7730M Graphics
AMD Radeon™ HD 7520G + 7670M Dual Graphics
AMD Radeon™ HD 7640G + 7670M Dual Graphics
AMD Radeon™ HD 7660G + 7670M Dual Graphics
•• The system specifications are subject to change without
notice.
•• The Storage device capacity of a computer in which
Recovery is installed, is represented as smaller than the
product specification.
•• The amount of memory that Windows can use may be
smaller than the actual amount of memory available.
Product Specifications
Registered Trademarks
Chapter 6
Appendix
ENERGY STAR® Partner
As an ENERGY STAR® Partner, SAMSUNG has
determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
Samsung is a registered trademark of Samsung Co., Ltd.
Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of
the Intel Corporation.
AMD, Dual-Core/Quad-Core are registered trademarks of the AMD
Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the
Microsoft Corporation.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
All other product or company names mentioned herein are
registered trademarks of their respective companies.
134
•• Power management settings when pluged in ;
- Turn off the display : 10 minutes
- Put the computer to sleep : 30 minutes
•• Power management features have various timing settings from
1 minute to 5hours.
•• The product can wake with a button press on the chassis from
sleep mode.
HDMI
Glossary
Chapter 6
Appendix
135
The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help.
Backup
DHCP (Dynamic Host Configuration Protocol)
A way to save the current data to restore it later if necessary.
A backup is a way to restore computer data when the data or
computer is damaged.
This refers to automatically allocating IP addresses to the users on
the network by the network administrators.
Chargeable USB
An application interface developed to enable Windows application
programs to access hardware devices at a very high speed. Since
the operating speed of graphics, memory and sound cards must be
very fast to provide high quality video and sound for games, Direct
X enables faster control and interaction between applications and
hardware devices. By using Direct X, the multimedia performance
of Windows has been hugely improved.
This program enables supplying power to a specific USB port when
the system is in power saving mode, hibernation mode or off.
Client
This refers to a computer that uses a shared network resource
provided by a server.
DDR SDRAM
(Double Data Rate Synchronous Dynamic Random Access Memory)
DRAM is a memory type whose cells consist of a capacitor and
transistor manufactured at a low price. SDRAM is a memory type
whose performance has been improved by synchronizing the clock
with the external CPU clock. DDR SDRAM is a memory type whose
performance has been improved by doubling the operating speed
of the SDRAM and is widely used nowadays. This computer uses
DDR SDRAM.
Device Manager
An administrative tool used to manage computer devices. You can
add or remove hardware or update a device driver using the Device
Manager.
Direct X
Driver
Software that interacts between the hardware and the operating
system. An operating system knows the hardware information
and controls the hardware. In general, a driver is supplied with the
corresponding hardware device.
D-sub (D-subminiature)
This is the cable connecting a general CRT monitor and the
computer. Analog video is output through this cable.
Glossary
Chapter 6
Appendix
136
DVD (Digital Versatile Disk)
Icon
DVD was developed to replace CD (compact disk). Although the
shape and size of the disc are the same as that of a CD, the capacity
of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD
video is digital unlike VHS (analog) video and supports MPEG2
compression and digital audio. To play a DVD, a DVD drive is
required.
This refers to a small image that represents a file that users can use.
Firewall
A communications network connecting computers, printers and
other devices within a local area such as within a building. A LAN
enables all connected devices to interact with other devices on the
network. The current LAN uses the Ethernet media access control
method developed in the early 1980s. To connect to an Ethernet, a
network card called a LAN card, Ethernet card or network interface
card is required. To exchange data between computers, a protocol
is required besides the hardware equipment. Windows Vista uses
TCP/IP as the default protocol.
A security system used to protect an internal network or intranet
from external networks through an authentication procedure.
HDMI
This is a digital video / audio interface specification that transmits
video and audio signals over a single cable.
Hibernation Mode
A power mode that saves all data in memory to the hard disk and
turns the CPU and hard disk off. When canceling Hibernation Mode,
all application programs that were running are restored to their last
state.
IEEE802.XX
This is a set fo specifications developed by the 802 committee of
IEEE for the LAN connection method called XX.
LAN (Local Area Network)
LCD (Liquid Crystal Display)
There are Passive Matrix and Active Matrix LCD types. This
computer uses the Active Matrix type LCD called a TFT LCD. Since
an LCD is implemented by transistors instead of a cathode-ray tube
unlike a CRT, its size can be slim. And because it does not blink, it
reduces eye strain.
Glossary
Network
Chapter 6
Appendix
137
PCMCIA( Personal Computer Memory Card International
Association) card
A group of computers and devices, such as printers and scanners,
connected by a communications link. A network can be either
small or large and can be connected permanently through cables
or temporarily through telephone lines or wireless links. The
biggest network is the Internet, a worldwide network.
This is an extended card slot specification for mobile computers
such as a notebook computer. Not only a memory, device but also
most peripherals such as hard disk drives, LAN cards, etc. can be
connected to this card slot.
Network Administrator
Protocol
A user who plans, configures and manages network operations.
Sometimes, a network administrator is called a system
administrator.
A protocol is a set of rules used by computers to communicate with
each other across a network. A protocol is a convention or standard
that controls or enables the connection, communication, and
data transfer between computing endpoints. It defines the data
transmission procedures and the transmission medium for more
efficient network functions.
Notification Area
This refers to the right area of the Taskbar including program icons
such as the volume control, the power options and the time.
Partition
This refers to the act or practice of dividing the storage space of
a hard disk drive into separate data areas known as partitions. If a
100GB hard disk drive is partitioned into 2 x 50GB partitions, the
hard disk drive can be used as if there are 2 hard disk drives.
Quick Launch
This refers to a toolbar that can be configured so that you can
launch a program such as Internet Explorer or display the Windows
Desktop with one click. You can add any icon to the quick launch
area of the Taskbar and launch frequently used program by clicking
that icon.
SDHC (Secure Digital High Capacity) card
This is the extension of the SD card that supports over 2GB bytes.
Glossary
Chapter 6
Appendix
138
Server
TCP/IPv4
In general, a server refers to a computer that provides shared
resources for network users.
This is a 4 byte (32 bit) address system separated into each byte
(8 bits) by a dot and each byte is represented as a decimal number.
Share
USB (Universal Serial Bus)
This refers to setting a resource of a computer such as a folder or
printer so that other users can also use it.
This refers to a serial interface standard developed to replace the
conventional interface standards such as Serial and PS/2.
Shared Folder
A folder that can be used by other users on the network.
Sleep Mode
A power mode that enables computers to save power consumption
when they are not being used. When a computer is in Sleep Mode,
the data on the computer memory is not saved to the hard disk. If
the power is turned off, the data in memory will be lost.
System File
System Files refer to files that are read and used by the Windows
operating system. In general, system files must not be deleted or
moved.
The data transmission specifications are one of the interface
standards used to connect a computer to peripheral devices.
These specifications include USB 1.0, 1.1, 2.0 and 3.0.
It is appropriate to support peripheral devices that require high
data rates such as an AV device, secondary HDD or CD-RW.
The higher the version (e.g. USB 3.0), the higher the data rate
provided.
Windows Media Player
A multimedia program included with Windows. Using this
program, you can play a media file, create an audio CD, listen to a
radio broadcast, search and manage media files, and copy files to a
portable device, etc.
Index
Chapter 6
Appendix
A
AP
M
62
B
Memory
87
Monitor Connection / Output
52
Multi Card Slot
50
Battery
89
BIOS Setup
81
O
Booting Priority
86
Overview
C
49
Password
Charge
90
Product Specifications
Click
45
D
Double-Click
45
Drag
46
Dual View
53
L
LCD Brightness
24
58
83
SW Update
77
Support Center
78
Touchpad
45
U
83
133
R
User Password
56
Recovery
95
S
6
Scroll
47
Security Slot
79
Shortcut Key
42
Status Indicators
25
84
V
Volume Control
Recorder
Safety Precautions
Supervisor Password
T
P
CD Drive
139
56
W
Wired Network
59
Wireless Network
62