Samsung Micro Audio System E430D User Manual

MM-E430D
DVD MICRO COMPONENT SYSTEM
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION : TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
This symbol indicates important
instructions accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CAUTION
• Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on
the apparatus.
• The Mains plug is used as a disconnect device and shall stay
readily operable at any time.
• This apparatus shall always be connected to a AC outlet with
a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug
shall be readily operable.
2
English
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATIONWHEN OPENAND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Safety Information
License
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
• Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
Be especially careful not to scratch discs when
handling them.
Holding discs
• Do not touch the playback side of the disc.
• Hold the disc by the edges so that
fingerprints will not get on the surface.
• Do not stick paper or tape on the disc.
Disc Storage
• Do not keep in direct sunlight
• Keep in a cool ventilated area
• Keep in a clean Protection jacket.
Store vertically.
✎✎NOTE
``
``
Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the
outside of the disc
✎✎NOTE
``
Condensation may form if warm air comes into contact with
cold parts inside the product. When condensation forms inside
the product, it may not operate correctly. If this occurs, remove
the disc and let the product stand for 1 or 2 hours with the
power on.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX,LLC,a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete
your registration.
• DivX Certified® to play DivX® video .
• DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
• Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• This item incorporates copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
• iPod,iPod classic,iPod nano and iPod touch are
trademark of Apple Inc., registered in the U.S.
and other countries.
Copyright
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
Copy Protection
• M
any DVD discs are encoded with copy protection. Because of this, you should
only connect your product directly to your TV, not to a VCR. Connecting to a VCR
results in a distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
Accessories
Check for the supplied accessories below.
Video Cable
FM Antenna
User's Manual
Remote Control/
Batteries(optional)
English
3
Contents
SAFETY INFORMATION
2
GETTING STARTED
5
CONNECTIONS
12
Safety Warnings
Accessories
Cautions on Handling and Storing Discs
License
Copyright
Copy Protection
5
5
6
9
9
9
10
11
Precautions
Icons that will be used in manual
Disc Types and Characteristics
Description
Front Panel
Top Panel
Rear Panel
Remote control
12 Connecting the Speakers
12 Connecting the FM Antenna
13 Connecting Audio from External Components
13 Connecting the Microphone
14Connecting the Video Out to your TV
SETUP
16
16
17
17
17
17
17
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
19
19
Before Starting (Initial Setting)
Setting the Setup menu
Display
TV Aspect
BD Wise
Resolution
Video Out Signal
HDMI Format
Audio
DRC (Dynamic Range Compression)
AUDIO-SYNC
Speaker Selection
Karaoke Scoring
Audio Return Ch.
System
Initial Setting
DivX(R) Registration
DivX(R) Deactivation
Language
Security
Parental Rating
Change Password
Support
Product Information
BASIC FUNCTIONS
20
20
21
21
26
26
26
27
28
28
29
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Sound Mode
Mute Function
Display Function
Listening to Radio
Setting the Clock
Timer Function
Sleep Timer Function
16
20
4
2
3
3
3
3
3
English
Using Bluetooth
USB Function
Using an iPod/iPhone
Recording Function
OTHER INFORMATION
35
36
37
Troubleshooting
Language code list
Specifications
30
35
Getting Started
30
32
32
34
01
ADVANCED FUNCTIONS
Getting Started
Precautions
Icons that will be used in manual
Make sure to check the following terms before
reading the user manual.
Icon
Term
Definition
d
DVD
This involves a function available
with DVD-Video or DVD±R/±RW
discs that have been recorded
and finalised in Video Mode.
B
CD
This involves a function available
with a data CD (CD-DA,
CD-R/-RW).
A
MP3
This involves a function available
with CD-R/-RW discs.
G
JPEG
This involves a function available
with CD-R/-RW discs.
D
DivX
This involves a function available
with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
!
CAUTION
This involves a case where a function
does not operate or settings may be
canceled.
✎
NOTE
This involves tips or instructions on
the page that help each function
operate.
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
• An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried
out.
English
5
ENGLISH
• Ensure that the AC power supply in your house complies with
the identification sticker located on the back of your product.
• Install your product horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7.5~10cm).
• Do not place the product on amplifiers or other equipment which
may become hot. Make sure the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Hole is empty.
• In order to disconnect the product completely from the
power supply, remove the AC plug from the wall outlet,
especially when left unused for a long period of time.
• During thunderstorms, disconnect the AC plug from the wall
outlet. Voltage peaks due to lightning could damage the
product.
• Do not expose the product to direct sunlight or other heat
sources. This could lead to overheating and malfunction of
the product.
• Protect the product from moisture, and excess heat or
equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC supply if the
product malfunctions. Your product is not intended for
industrial use.
• Use of this product is for personal use only.
• Condensation may occur if your product or disc has been
stored in cold temperatures. If transporting the product
during the winter, wait approximately 2 hours until the
product has reached room temperature before using.
• The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
• Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
• Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.
• Direct the loudspeakers towards the listening area.
Getting Started
Disc Types and Characteristics
Disc types that can be played
Disc Types &
Mark (Logo)
Region Code
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
Disc Type
DVD-VIDEO
Region
Code
Area
Recorded
Signals
Disc
Size
Max. Playing Time
Approx. 240 min.
(single-sided)
VIDEO
12 cm
AUDIO
12 cm
74 min.
12 cm
-
DVD-VIDEO
1
2
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
AUDIO
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
VIDEO
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
Approx. 480 min.
(double-sided)
AUDIO-CD
+
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
• DVD discs purchased abroad may not play on this
product.
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
6
English
01
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (. / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions
can be played.
• Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
• If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
• A maximum of 999 tracks can be played per CD.
• A maximum of 250 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
• JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 999 images can be stored on a folder.
• When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
DVD±R/±RW, CD-R/RW Discs
Getting Started
CD-R MP3 Discs
• If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
DivX (Digital internet video express)
DivX® is a video file format developed by DivX, Inc and
is based on MPEG4 compression technology to
provide audio and video data over the Internet in
real-time.
MPEG4 is used for video encoding and MP3 for audio
encoding, enabling to watch a movie at near
DVD-quality video and audio.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
AVI
WMV
Supported Versions
DivX3.11~DivX5.1
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
MP3
80~320kbps
WMA
56~128kbps
AC3
128~384kbps
Sampling
Frequency
44.1khz
44.1/48khz
• Aspect Ratio : This product supports up to 720x576
pixels. TV screen resolutions higher than 800 will not
be supported.
• When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
• Sections with a high frame rate might not be played
while playing a DivX file.
• Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
• Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolution higher than
800 x 600 pixels, etc.)
English
7
Getting Started
USB Host Specification
USB Host Specification
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type
cable.
• Supports UMS (USB Mass Storage Device) V1.0
compliant devices.
• Supports the device of which the connected drive is
formatted in the FAT (FAT, FAT16, FAT32) file system.
Non-compliance
• Does not support a device that requires installing a
separate driver on the PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using the USB
extension cable may not be recognized.
• A USB device requiring a separate power source
needs to be connected to the product with the
separate power connection.
Operational Limitations
• A device supporting USB 1.1 alone may cause a
difference in the picture quality, depending on the
device.
USB Devices that can be used with the
product
• USB Storage Device, MP3 Player
• Removable HDD
- Removable HDDs equipped with less than 160
Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be
recognized, depending on the device.
- If the connected device does not work due to
insufficient power supply, you can use a
separate power cable to supply power so that it
can work properly. The connector of the USB
cable may differ, depending on the manufacturer
of the USB device.
• USB card Reader: One slot USB card reader and
Multi slot USB card reader.
- The USB card reader may not be supported,
depending on the manufacturer.
- If you install multiple memory devices into a multi
card reader, you may experience problems.
8
English
Supported file Formats
Format
Still
Picture
File name
JPG
MP3
WMA
WMV
DivX
File
extension
JPG
.JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11~
DivX5.1
Pixel
640x480
–
–
720x576
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
Music
Movie
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require
additional program installation when connected to a
PC are not supported.
• Some MP3 players, when connected to this product,
may not operate depending on the sector size of their
file system.
• The USB host function is not supported if a product
that transfers media files by its manufacturer specific
program is connected.
• Does not operate with Janus enabled MTP (Media
Transfer Protocol) devices.
• The USB host function of this product does not
support all USB devices.
• A certain USB, digital camera device, USB card
reader or Smart Phone may not be supported.
• Russian symbols in filenames (MP3/JPEG/DivX)
are not supported.
01
Description
Getting Started
Front Panel
PHONE
MIC
5V 500mA
2
1
1.
2.
3.
4.
3
4
5
5. MIC jack
Disc Tray
Window Display
USB jack
Phone jack
•If you plug the headset connector into the headset
jack of the main unit, no sound will be produced further
through the speakers.
Top Panel
1. Galaxy Dock
2. iPod Dock
3. POWER button
• Press this button to switch your prouct.
GALAXY
4. Function button
5. Search/Skip button
6. STOP/Tuning Mode button
7. PLAY/PAUSE button
8. Search/Skip button
9. OPEN/CLOSE button
10. VOLUME control button
11. Galaxy button
VOLUME
1
2
3
4 5
6
7
8
9 10 11
USING THE TOUCH BUTTON
¡¡ Tap on touch screen with your fingertip.
¡¡ To avoid damage to the touch screen, do not use any object other than your fingers to operate it.
¡¡ Do not tap on the touch screen if your fingers are not clean.
¡¡ Do not tap on the touch screen with gloves on.
¡¡ The touch screen may not function if you use your fingernail or other instrument such as a ballpoint pen.
English
9
Getting Started
Rear Panel
SPEAKERS
OUT (4 )
VIDEO OUT
SPEAKERS
OUT (4 )
HDMI
OUT
1
2
3
4
5 6
ONLY FOR
SERVICE
7
1
2.0 CHANNEL SPEAKER OUTPUT
CONNECTORS
Connect the speakers.
2
VIDEO OUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
3
FM ANTENNA JACK
Connect the FM antenna.
4
AUX IN JACK
Connect the Audio Out of the external analog component to the AUX IN
jack.
5
COMPONENT VIDEO OUTPUT
JACKS
Connect a TV with Component video inputs to these jacks.
6
HDMI OUT JACK
Use an HDMI calbe,connect this HDMI output terminal to the HDMI
input termianl on your TV for the best quality picture.
7
ONLY FOR SERVICE
This jack is just for testing, please don't use it.
10
English
01
Getting Started
Remote control
Tour of the Remote Control
MUTE button
POWER button
EQ button
SOUND button
TIMER/CLOCK button
TIMER ON/OFF button
FUNCTION button
DVD DISC SKIP * button
SLEEP button
TITLE MENU button
DISC MENU button
SYNC button
Number(0~9) button
VOLUME - button
VOLUME + button
Skip, RDS PTY *­button
Search, RDS DISPLAY *­button
STOP button
PLAY button
PAUSE button
USB REC button
HOME button
INFO button
CURSOR,TUNING , button
CURSOR, # button
REPEAT button
TOOLS button
ENTER button
CURSOR, b button
CURSOR, TUNING . button
RETURN button
EXIT button
KEYCON, D button
C button
DISPLAY, A button
MO/ST, B button
CD REC SPEED button
MY KARAOKE button
MIC VOL -, + button
* This product does not support the DISC SKIP/SYNC function with marked [ *].
* This product may not have the RDS function depending on your region.
Installing batteries in the Remote Control
✎✎NOTE
* Battery size: AAA
`` Place batteries in the remote control so they match the
polarity : (+) to (+) and (–) to (–).
`` Always replace both batteries at the same time.
`` Do not expose the batteries to heat or a flame.
`` The remote control can be used up to approximately 23
feet (7 meters) in a straight line.
English
11
Connections
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
VIDEO OUT
SPEAKERS
OUT (4 )
HDMI
OUT
Speaker (R)
ONLY FOR
SERVICE
Speaker (L)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m)
For 55" TV's 11.5 ~ 13.1 feet (3.5~4 m)
Front Speakers
ei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
!!CAUTION
``
``
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
``
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
✎✎NOTE
Connecting the FM Antenna
VIDEO OUT
SPEAKERS
OUT (4 )
PHONES
ONLY FOR SERVICE
AUX IN
HDMI
OUT
ONLY FOR
SERVICE
FM Antenna
(supplied)
1. Connect the FM antenna (supplied) to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
NOTE
✎✎
``
This product does not receive AM broadcasts.
12
English
02
Connecting Audio from External Components
Connections
VIDEO OUT
SPEAKERS
OUT (4 )
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
HDMI
OUT
ONLY FOR
SERVICE
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analog component.
• Be sure to match the colors of the connecting jacks.
2. Press the FUNCTION button to select AUX input.
• The mode switches as follows :
DVD/CD ➞ ARC ➞ FM ➞ USB ➞ R.IPOD ➞ IPOD ➞ AUX ➞ BT/GAL.
✎✎NOTE
``
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
Connecting the Microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.
1. Connect the microphone to the MIC jack on the front of the product.
2. Press the MIC VOL-, + button to adjust the volume of the microphone.
3. During the playback, press the KEYCON button,then press the (#/b) button.
Each time the (#) button is pressed, the key is increased, and each time the (b) button is pressed, the key is decreased.
4. Press the MY KARAOKE button to suppress the Vocal. Each time the button is pressed, the
selection is changed as follows: MIN ➞ MAX ➞ OFF.
NOTE
`` If you hear strange noises (squealing or howling) while using the Karaoke feature, move the
microphone away from the speakers. Turning down the microphone's volume or the speaker volume is also
effective.
✎✎
``
``
``
``
``
``
The microphone does not operate in the AUX and TUNER mode.
After setting my karaoke or the keycon, EQ/POWER BASS does not work.
MY KARAOKE function doesn't work in DIVX state,KEYCON function doesn't work in DIVX/USB/MP3/WMA
state.
When Speaker Selection is set to TV Speaker, The Microphone is not available.
After the stop operation, the setting of my karaoke and keycon will disappear.
Only when connected with a Microphone, the MY KARAOKE and KEYCON functions are available.
English
13
Connections
Connecting the Video Out to your TV
Choose one method for connecting to a TV.
VIDEO OUT
SPEAKERS
OUT (4 )
HDMI
OUT
METHOD 2
(supplied)
ONLY FOR
SERVICE
METHOD 1
(not supplied)
VIDEO INPUT
METHOD 3
COMPONENT IN
TV
METHOD 1 : Component Video(BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input
Jacks on your TV.
METHOD 2 : Composite Video(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
METHOD 3 : HDMI(BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
✎✎NOTE
``
``
``
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 17 for the resolution setting.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
14
English
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
• HDMI (High Definition Multimedia Interface)
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
• HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
• What is the HDCP?
• HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 14)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
✎✎NOTE
``
``
``
The Anynet+ function supports some buttons of the remote control.
``
Please check the
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
logo (If your TV has an
logo, then it supports Anynet+ function.)
Using ARC(Audio Return Channel)
ARC is feature that transfer audio from the TV back to the product and listen to your TV's audio through the
product instead of the TV's speakers without having to connect a second cable between the TV and other
audio system.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 14)
USB REC
2. Press the F (
) button to select ARC input.
• You can select ARC by pressing the FUNCTION button on the remote control and the product.
English
15
Connections
``
02
!! CAUTION
Setup
Before Starting (Initial Setting)
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Setting screen will be displayed.
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1
Initial setting | On-Screen Language
Select a language for the on-screen displays.
English
한국어
3
Nederlands
Français
Deutsch
2
Italiano
Move 2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
1
HOME BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
✎✎NOTE
``
``
``
4
Select
To move to the previous screen, press and hold the
RED(A) button.
Once you selected a menu language, you can change it
by pressing the STOP (@) button on the front panel for
more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to
Initial Setting. (see page 19)
Settings
Function
DVD/CD
1. In NO DISC mode, or during playback, press
STOP button twice.
2. Press the _+ buttons to select Settings, then
press the ENTER button.
3. Press the ▲▼ buttons to select desired menu,
then press the ENTER button.
4. Press the ▲▼ buttons to select desired
sub-menu, then press the ENTER button.
5. Press the ▲▼ buttons to select desired item,
then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
16
English
03
You can configure various display options such as
the TV Aspect.
✎✎NOTE
``
TV Aspect
``
Depending on the type of television you have, you
may want to adjust the screen setting.
``
Resolution
• 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
• 480p(576p) : Outputs 480 lines of progressive video.
• 720p : Outputs 720 lines of progressive video.
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p: Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal
resolution when connected via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On.)
You can view the full 16:9 picture on
your widescreen TV.
✎✎NOTE
• 4:3 Letter Box
• 16:9 Wide
``
``
✎✎NOTE
``
``
``
This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play
and the product or your BD Wise-compliant
Samsung TV.
If you want to change the resolution in BD Wise
mode, you must set BD mode to Off in advance.
BD Wise will be disabled if the product is connected to
a device that does not support BD Wise.
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
When using HDMI, the screen is automatically converted to the
16:9 Wide mode and TV Aspect is deactivated.
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products with
BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
• On : The original resolution of the DVD disc will be
output to the TV direct.
• Off : The output resolution will be fixed according
to the Resolution previously set, regardless of the
resolution of the disc.
If Component or Composite is connected, the
resolution supports only 480i(576i).
1080P may not appear depending on TV.
Video Out Signal
Different countries apply different TV standard.You
can select from NTSC or PAL.
• NTSC : You can set to the NTSC video format
• PAL : You can set to the PAL video format
✎✎NOTE
``
Depending on the type(NTSC or PAL) of main unit you have, the
TV screen displayed may be different.
English
17
Setup
Display
Setup
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
• Monitor : Select if connected to a Monitor via
HDMI.
• TV : Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
• Audio System : V
ideo is transmitted over the
HDMI connection cable only, and
audio is output through the
product speakers only.
• TV Speaker : B
oth video and audio signals are
transmitted over the HDMI
connection cable, and audio is
output through your TV speakers
only.
NOTE
`` The default setting of this function is Audio
System .
✎✎
``
HDMI Audio is automatically down-mixed to 2ch
for TV speakers.
``
When TV Selection is set to TV Speaker, EQ/
POWER BASS doesn't work.
``
With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
Settings
Display
DRC
Audio
Audio Sync
System
Language
Security
: 0 Full
: 506/8
mSec
4/8
Speaker Selection
Karaoke Scoring
Audio Return Ch.
2/8
Off
Support
Karaoke Scoring
Move
Select
Return
• You can select either Full, 6/8, 4/8, 2/8, Off.
✎✎
AUDIO-SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video.
Settings
Display
:0
Audio
Audio Sync
System
Speaker Selection
Karaoke Scoring
Audio Return Ch.
25 ms
: 50 mSec
50 ms
Security
• Off : T
urn the Audio Return Channel function off.
• Auto: Listen to TV sound from the speakers if your
TV is compatible with the Audio Return Channel
function.
75 ms
100 ms
125 ms
Support
150 ms
175 ms
Move
Select
Audio Return Ch.
You can enjoy TV sound from the speakers by using
just one HDMI cable.
0 ms
DRC
Language
Karaoke score display can be toggled On or Off.
• Off : Turns off the karaoke score display.
• On : After the singing, the score is displayed on
the screen.
NOTE
`` In USB/DIVX/MP3/WMA state,karaoke scoring
does not work.
Return
✎✎NOTE
• You can set the audio delay time between 0 mS
and 300 mS. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
18
English
``
``
``
When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
Using an ARC (Audio Return Channel)-uncertified
HDMI cable may cause a problem in compatibility.
ARC function is only available if an ARC-compliant
TV is connected.
``
The selected language will only appear if it is
supported on the disc.
Security
By using the Initial Setting, you can set language and
TV aspect setting.
NOTE
`` If an HDMI cable is connected to the product, the TV aspect
does not appear and it is set to 16:9 Wide automatically.
✎✎
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
DivX(R) Registration
Parental Rating
View DivX(R) VOD Registration Code to purchase
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
and play DivX(R) VOD content.
NOTE
`` This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
`` Even after you reset the system, the settings of DivX
Registration will not be reset.
✎✎
DivX(R) Deactivation
Select this to get a new registration code.
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
- Once the setup is complete, you will be taken to the previous screen.
Change Password
Select Change and enter the 4-digit password to set the
parental lock using the number buttons on the remote control.
Language
Settings
You can select the language you prefer for
on-screen menu, disc menu, etc.
Display
Parental Rating
: Off
Audio
Password
: Change
System
Language
Settings
Security
Support
ISH
H
N
H
English
: ENGLISH
Display
OSD Language
Audio
Disc Menu
H
H
H
N
System
Audio
: ENGLISH
Chinese
Language
Subtitle
: ENGLISH
Dutch
N
Support
Security
Arabic
Move
Select
Return
Farsi
French
German
GUESE
Return
Move
Select
Return
If you forgot your password
OSD
Language
Disc Menu
Settings
ISH
H
N
H
Display
Audio
Audio
System
Select the language for the
on-screen displays.
Select the language for the disc
menu displays.
N
GUESE
Return
Support
ENGLISH
: ENGLISH
SelectOSD
theLanguage
language
for disc audio.
KOREAN
Disc Menu
: ENGLISH
Audio
DUTCH
: ENGLISH
FRENCH
Language
Subtitle
SelectSubtitle
the language for disc subtitles.
H
H
N
In "NO DISC" mode, press and hold the STOP (@)
button on the front panel for 5 seconds or more.
All settings will revert to the factory settings.
Security
GERMAN
Support
ITALIAN
POLISH
aaTo select another language, select
OTHERS of Disc
PORTUGUESE
Menu, Audio and Subtitle, and enter
the language
Move
Select
Return
code of your country (see
page 36).
aa You cannot select OTHERS in the OSD Language menu.
Product Information
Provide contact information for assistance with your product.
English
19
Setup
Initial Setting
03
✎✎NOTE
System
Basic Functions
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
1. Press the OPEN/CLOSE button.
BA
2. Place a disc gently into the disc Compartment
with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the
disc Compartment.
Track01
1/17
✎✎NOTE
``
``
``
``
``
Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up where
you left off. (This function works only with DVDs.)
Press the STOP button twice during playback to
disable the Resume function.
If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will be changed to
Resume stop mode. and after another 5 minutes
in Resume stop mode, it will be changed to
screen saver mode.
The initial screen may appear different, depending
on the content of the disc.
Pirated discs will not run in this product because
it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
DTS Audio is not supported.
※ will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
• If no button input is made for more than 5 minutes
in Stop or Play (music) mode, the screen saver will
be activated.
• If the product is left in the screen saver mode for
more than 20 minutes, the power will
automatically turn off. (Except during play a music)
20
English
0:15 / 3:59
Function DVD/CD
Repeat Play Mode
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc Compartment.
• For an Audio CD, the first track will be played
automatically.
- Press the [] buttons to move to the
previous/next track.
• For the MP3/WMA disc, press the _+
buttons to select Music, then press the
ENTER button.
- Press the $%_+ buttons to select a
desired file and press the ENTER button.
- Press the () buttons to move to the
previous/next pages.
2. Press the STOP (@) button to stop playback.
✎✎NOTE
``
``
``
Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
04
Using the Playback Function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
dBAD
1. Insert a JPEG disc on the disc Compartment.
2. Press the ◄,► buttons to select the Photos,
and then press the ENTER button.
Press the () buttons for Search Function.
3. Press the $% buttons to select the folder you
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
• The selected file will play and slide show will
start.
• To stop slide show, press the PAUSE (#)
button.
• You can view the previous/next file by
pressing the ◄,► buttons during the
slideshow mode.
../ PICTURES
JPEG 2
JPEG 3
642 X 352
``
No sound is played in search mode.
Skipping Scenes/Songs
dBAD
Slow Motion Play
2010/01/01
Pages
Return
Dd
Rotate Function
G
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
• GREEN(B) Button: Rotate 90° Counter-clockwise.
• YELLOW(C) Button: Rotate 90° Clockwise.
✎✎NOTE
``
✎✎NOTE
Press the [] buttons.
• Each time the button is pressed during playback,
the previous or next chapter, track or directory (file)
will be played.
JPEG 1
Function DVD/CD
( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
Press the PAUSE (#) button and then press
the ) button for Slow Motion play.
d
D
*1 ➞*2 ➞*3
*1 ➞*2 ➞*3
✎✎NOTE
``
``
No sound is heard during slow playback.
Reverse slow playback does not work.
The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
English
21
Basic Functions
JPEG File Playback
Basic Functions
Step Motion Play
dD
1. During playback, press and hold the
TITLE MENU button on the remote
control.
• The picture moves forward one frame
each time the button is pressed during
playback.
2. Press the $%_+ buttons to make
the desired selection, then press the ENTER
button.
✎✎NOTE
No sound is heard during step motion playback.
5 Minute Skip function
D
During playback, press the _,+ button.
• Playback skips 5 minutes forward whenever you
press the + button.
• Playback skips 5 minutes backward whenever you
press the _ button.
✎✎NOTE
``
You can operate this function only on the DivX.
Using the Disc Menu
d
You can view the menus for the audio language,
subtitle language, profile, etc.
1. During playback, press and hold the
DISC MENU button on the remote
control.
2. Press the $%_+ buttons to make
the desired selection, then press the ENTER
button.
✎✎NOTE
``
Depending on the disc, menu setup items may
vary and this menu may not be available.
22
English
d
For DVDs containing multiple titles, you can view the
title of each movie.
Press the PAUSE button
repeatedly.
``
Using the Title Menu
✎✎NOTE
``
Depending on the disc, menu setup items may
vary and this menu may not be available.
04
A-B Repeat Playback
dBAD
You can repeatedly play back a designated section
of a DVD or CD.
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
Repeat dB
1. During the DVD disc or CD playback,
press the REPEAT button on the
remote control.
2. For DVD, press the $% buttons to
select A-.
For CD press the REPEAT button
repeatedly until
appears on the TV.
Off
3. Press the ENTER button at the point where you
want repeat play to start (A).
1. During the DVD/DivX playback, press the
REPEAT button on the remote control.
2. Press the $% buttons to select a desired repeat
mode, then press the ENTER button.
3. Press the ▲▼ buttons to select Off to return to
normal play, then press the ENTER button.
Z
D
For CD, press the REPEAT button to select to
Off ➞ Title ➞ Folder ➞ All
``
;
``
;
;
.
✎✎NOTE
``
1. During the CD/ MP3 playback, press the
REPEAT button repeatedly to select the repeat
mode you want.
A
5. To return to normal playback,
For DVD, press the REPEAT button to select to
REPEAT OFF.
Off ➞ Title ➞ Chapter ➞ A-
CD/MP3 Repeat
B
4. Press the ENTER button at the point where you
want repeat play to stop (B).
The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.
For DVD, point B cannot be set until 5 seconds
of playback has elapsed from point A.
Repeat function is not available during CD/DVD
disc is played if karaoke scoring is set to on.
;
(Normal ; Repeat Track ; Repeat All ;
Random ; Repeat Section A-B)
;
;
; ;
(Normal ; Repeat Track;
Repeat DIR ; Repeat All; Random)
English
23
Basic Functions
Repeat Playback
Basic Functions
Displaying Disc Information
d
3/4
1/1
0:00:21
1/2 KO
2/2 EN
1/1
Change ) : Most DVD discs are
recorded in chapters so that you can
quickly find a specific chapter.
`` Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
`` Audio(
): Refers to the film's
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
`` Subtitle(
): Refers to the subtitle
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
`` Angle(
): When a DVD contains
multiple angles of a particular scene, you
can use the Angle function.
`` Chapter(
Select
D
2/3
1/2 KO
2/2 EN
Change Selecting the Audio Language
1. During the playback, press the TOOLS button
on the remote control.
2. Press the $% buttons to select the desired
item.
3. Press the _+ buttons to make the desired
setup change and then press the ENTER
button.
- You may use the number buttons of the
remote control to control some item.
4. To make Disc information disappear, press the
TOOLS button again.
✎✎NOTE
``
``
If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
Some tools menu may differ depending on discs and files.
TOOLS menu
) : To access the desired title
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
`` Title(
24
English
dD
1. Press the TOOLS button.
2. Press the $% buttons to select AUDIO (
display.
3. Press the _+ buttons to select the
desired audio language.
• Depending on the number of
languages on a DVD disc, a
different audio language is
selected each time the button is pressed.
)
04
Angle Function
d
dD
1. Press the TOOLS button.
This function allows you to view the same scene in
different angles.
2. Press the $% buttons to select
) display.
SUBTITLE (
3. Press the _+ buttons to select the
desired subtitle language.
• Depending on the number of languages on a
DVD disc, a different subtitle language is
selected each time the button is pressed.
✎✎NOTE
``
``
Depending on the disc, the Subtitle and Audio
Language functions may not be available.
On the DivX file format, the subtitle languages
may be represented by only numbers.
Caption Function
1. Press the TOOLS button.
2. Press the $% buttons to select
ANGLE (
) display.
3. Press the _+ buttons to select the
desired angle.
✎✎NOTE
``
The Angle function works only with discs on
which multiple angles have been recorded.
D
• You must have some experience with video
extraction and editing in order to use this feature
properly.
• To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. RootSamsung_007CD1.avi
Samsung_007CD1.smi
• Up to 60 alphanumeric characters or 30 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
English
25
Basic Functions
Selecting the Subtitle Language
Basic Functions
Sound Mode
Mute Function
EQ
This is useful when answering a doorbell or
telephone call.
Your micro-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of music
you are listening to.
1. Press MUTE button:
``
``
‘ MUTE ’ appears in the display.
To switch the sound back on, press the MUTE
button again or the VOL-, + button.
Press EQ on the remote control. Each time you
press EQ,the EQ model will switch in the following
order:
OFF; FLAT ;RANCHA ; SAMBA ; CUMBIA ;
HABANA ; BOOMBA;REGGAE ; PARTY ;
POP ; HIPHOP; ROCK;JAZZ ; CLASS ;
STA+EQ; DYN+S;MP3+ ; VIR+S .
✎✎NOTE
Display Function
``
The equalizer is set to "OFF" automatically and
becomes not available during a CD recording.
You can view all functions available on the display,
adjust the brightness of the display.
``
This function is not available during playback of a
DVD disc.
1. Each time you press the DISPLAY button on
the remote control, the display mode will
change as following:
POWER BASS
Your micro-compact system has a bass
amplification function called Power Bass.This
function makes the sound more powerful and real.
1. Press the SOUND button on the remote
control.
Result: “POWER BASS ON” is displayed.
2. To cancel this function, press this button
again, “POWER BASS OFF” is displayed for a
few seconds.
✎✎NOTE
``
The Power Bass is set to "OFF" automatically
and becomes not available during a CD
recording.
26
English
``
The Demo function
All functions available on the system appear on the
front panel display.
``
The Dimmer function
The Dimmer function is selected and the display
darkens.
``
Display ON
The Display turns on.
``
Clock ON
The Clock you set is displayed.
04
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Preset Tuning :Press the STOP button to
select FMXX and then press TUNING,,.
buttons to select the preset station.
• Automatic Tuning : Press the STOP button
to select MANUAL and then press and hold
the TUNING ,,. button to automatically
search for active broadcasting stations.
• Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
TUNING,,. button to increase or decrease
the frequency.
Using buttons on the product
1. Press the F button to select FM.
2. Select a broadcast station.
• Preset Tuning : Press the STOP ( @ ) button to
select FMXX and then press the
[ ] buttons to select the preset station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP ( @ ) button on the top panel to
select <MANUAL> mode.
3. Press the [ ] button on the top panel to
select <89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the [ ] buttons on the top panel to
select preset number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the [ ] on
the top panel to select a channel.
NOTE
✎✎
`` You can also use TUNING,,. buttons on the remote
control instead of [ or ] buttons in step 3,5,7 .
• Automatic Tuning : Press the STOP ( @ )
button to select MANUAL and then press and
hold the [ ] buttons to automatically
search the band.
• Manual Tuning : Press the STOP ( @ ) button
to select MANUAL and then press the [ ]
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
✎✎NOTE
`` This applies only when listening to an FM
station.
English
27
Basic Functions
Listening to Radio
Basic Functions
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
Timer Function
The timer enables you to switch the system on or off
at specific times automatically.
``
1. Switch the system on by pressing the
POWER button.
2. Press and hold TIMER/CLOCK
button and then press the ENTER
button.
Result: "CLOCK" is displayed.
3. Press ENTER.
Result: The hour flashes.
``
``
Increase the hours:$
Decrease the hours:%
4. When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.
``
``
Increase the minutes:$
``
``
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing
the POWER button.
2. Press and hold the TIMER/CLOCK
button and then press $ or %
buttons until TIMER is displayed.
3. Press the ENTER button.
Result: O
N is displayed for a few seconds, you can set
the timer switch-on time.
4. Set the timer switch-on time.
Decrease the minutes:%
5. When the correct minute is displayed, press
ENTER.
Result: " TIMER" appears in the display.
The current time is now set.
``
✎✎NOTE
``
``
Before setting the timer, check that the current time
is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
If you no longer want the system to switch on or off
automatically, you must cancel the timer by pressing
the TIMER ON/OFF button.
a
b
ress the $ or %button.
P
Press the ENTER button.
c
d
Result: The minutes flash.
Press
the $ or % button.
Press the ENTER button.
Result: O
FF is displayed for a few seconds, you
can now set the timer switch-off time.
5. Set the timer switch-off time.
You can display the time, even when you are using another
function, by pressing and hold the TIMER/CLOCK button
once.
You can also use [ or ] on the front panel instead
of$,% buttons in step 3,4.
a
b
Press the $ or % button.
Press the ENTER button.
c
d
Result: The minutes flash.
Press
the $ or % button.
Press the ENTER button.
Result: V
OL XX is displayed, where XX
corresponds to the volume already set.
6. P
ress $ or % button to adjust the volume level
and press the ENTER button.
Result: The source to be selected is displayed.
7. P
ress the $ or % button to select the desired source
to be played when the system switches on.
``
``
``
28
English
FM (radio) : a Press the ENTER button.
b Select a preset station by press the $
or % button.
DVD/CD (compact disc): Load one audio CD.
USB : Connect the USB device.
04
8. Press the ENTER button.
You can set the time that the DVD player will shut itself off.
1. Press and hold SLEEP button:
`` Result: Starts playback and the following
indication appears: 90 MIN
Result: CHK REC (Do you want to record?) is displayed.
9. Press the ENTER button.
Result: REC N is displayed, you can press the $ or %
button to select the REC Y or REC N, and then press
ENTER button.
1). If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner
timing recording.
2). If you select the REC Y, you can set the tuner timing
recording.
a. Press the ENTER button.
Result: ON is displayed for a few seconds, you
can set the tuner timing recording switch-on time.
b. Press the ENTER button.
Result: OFF is displayed for a few seconds, you
can set the tuner timing recording switch-off time.
2. Press and hold the SLEEP button once
or more times to indicate how long the
system should continue playing before it
switches off:
90 MIN  60 MIN  45 MIN  30 MIN 
15 MIN  OFF
At any time, you can:
`` check the remaining time by pressing and holding
the SLEEP button.
`` Change the remaining time by repeating steps 1
and 2.
3. To cancel the sleep timer, press and hold the SLEEP
button until OFF appears on the display.
✎✎NOTE
``
``
``
``
``
The maximal tuner timing recording time is 5 hours.
If the timer switch on and off times are identical, the
word ERROR is displayed.
If there is no disc or usb, please wait 5 seconds, it will
automatically change to “FM”.
If the switch-on or -off time is the same as the timing
recording time, only the switch-on or -off time is
effective, and the timing recording time is not applied.
If the auto timer is turned on, the DVD/CD or USB function
may require an additional step to be activated depending
on the disc (or device). Hence it is better for you to select
the FM function instead.
Cancelling the Timer
After having set the timer, it will start
automatically as shown by the TIMER
indication on the display. If you no longer wish
to use the timer, you can cancel it.
1. To cancel the timer, press and hold
the TIMER ON/OFF button once.
Result:
is no longer displayed.
2. To resume the timer, press and hold the TIMER
ON/OFF button again.
Result: is displayed again.
✎✎NOTE
``
When you select the TIMER OFF mode, the TIMER
RECORDING and TIMER function are not available.
English
29
Basic Functions
Sleep Timer Function
Advanced Functions
• In Bluetooth mode, some model's Repeat/Stop/
Next/Back functions are not available.
Using Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-compliant
devices to easily interconnect with each other using a short
wireless connection.
`` A Bluetooth device may involve with a noise or
malfunction, depending on usage.
-- When a part of human body is in contact with the
receiving/transmitting system of the Bluetooth device or
the Product.
-- Electrical variation from obstructions caused by a wall,
corner or office partitioning.
-- Electrical interference from same frequency-band
devices including medical equipment, microwave oven
and wireless LAN.
-- Pair the Product with the Bluetooth device while keeping
a close distance.
-- The farther the distance between Product and Bluetooth
device is, the worse the quality is. If the distance
exceeds the Bluetooth operational range, the
connection is lost.
-- In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
-- This wireless device may cause an electric interference
during its operation.
-- The Product has an effective reception range of up to 10
meters in all directions if there are no obstacles. The
connection will be automatically cut off if the distance is
out of this range. Even within this range, the sound
quality may be deteriorated by obstacles such as walls
or doors.
✎✎NOTE
``
``
``
-----
To disconnect the Bluetooth device from the
Product
You can disconnect the Product from the Bluetooth
device. (Refer to Bluetooth deivice's user's manual)
• The Product will be disconnected.
• When the Product is disconnected from the
Bluetooth device, the Product will display
"DIS CON" on the front display.
To disconnect the Product from the
Bluetooth device
Press the F button on the top panel to switch from
“BT/GAL ” to another mode.
• Except disconnect through function conversion, the
connected Bluetooth device will wait a certain time
for response from the product before terminating
the connection. (Disconnection time may differ,
depending on the Bluetooth device)
• The currently connected device will be
disconnected.
To connect the product to a Bluetooth device
Check if the Bluetooth device supports the Bluetoothcompliant stereo headset function.
1. Press the FUNCTION button on the remote control of
product to display the "BT/GAL" message.
• You will see “WAIT” for 2 seconds and then
“READY” display .
2. Select the Bluetooth menu on Bluetooth device you
want to connect. (refer to Bluetooth device's user's
manual)
✎✎NOTE
``
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Product and the Bluetooth device exceeds the limit (10
meters). If the distance decreases to the effective range
or you restart the Bluetooth device, the Bluetooth
connection can be restored.
``
If the Bluetooth device falls back in the effective range,
you can restart to restore the pairing with the Bluetooth
device.
``
With some Bluetooth devices, some functions may not
work properly.
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung]MICRO XXXXXX" from the
searched list.
• When the product is connected to the Bluetooth
device, the Product will display "CONNECT" on the
front display, followed by the device name of the
connected Bluetooth device.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Product.
30
English
The Product only supports Middle Quality SBC data(up
to 237kbps@48kHz), and does not support High Quality
SBC data(328kbps@44.1kHz).
Only one Bluetooth device can be paired at a time.
Search or connection by product may not be performed
properly in the following cases:
If there emits a strong electric wave around product.
If several Bluetooth devices are simultaneously paired
with product.
If the Bluetooth device is turned off, not in place, or
malfunctions.
Note that such devices as microwave oven, wireless
LAN adapter, plasma bulb and gas stove use the same
frequency range as the Bluetooth device, which can
cause an electric interference.
05
1. P
ush the top panel manually first.
2. Press the Galaxy button under the top panel ,the top
panel pops open automatically,then you can see
the Galaxy Dock.
3. P
lace the Galaxy device in the Galaxy Dock.
• The Galaxy device charging automatically.
<Samsung Galaxy Devices>
To use your Samsung Galaxy series device with the Dual
Dock, you must download and install the Docking Mode
application from the Android Market on the device. To
download, follow these steps:
1. Tap the Play Store (Android Market) icon on the
Samsung Galaxy device's main screen.
2. Tap the search icon on the screen to access the
search bar.
3. In the search bar, type in the [Samsung Wireless
Audio with Dock], and then search.
4. In the search result list, find, and then tap
[Samsung Wireless Audio with Dock] to start
downloading.
5. Tap [install].
To play music, follow these steps:
connecting Samsung Galaxy device in docking
mode, you may have to turn off the Bluetooth mode
of the Samsung Galaxy device.
• If you have trouble with connecting the Samsung
Galaxy device to the Dual Dock, turn off the device's
Bluetooth mode.
• Some Samsung Galaxy device may not fit into this
product’s Galaxy Dock. In such cases, connect
such Galaxy device with USB cable to the USB port
for charging it.(Please do not connect a device via
USB to the product while in AUX, FM or CD mode.
Otherwise, it may cause an error.)
• If your Galaxy device is in Bluetooth mode and
docked onto this product, do not touch on the
Galaxy device’s touch screen with your body.
(suggested to use remote control for operation)
• Compatibility is subject to carrier and regional
specifications.
• Downloading the"Samsung W ireless Audio
with Dock" application is required,if you haven't
downloaded this applictation on your device,and
used only for charging the Galaxy device.
• Some Galaxy devices docked on Galaxy Dock may
experience unstable connection. If such a device is
exposed to shock, the connection will be broken.
Galaxy Compatibility List
Please see page 38.
1-1.If you start the app when the product is the only
device for the Bluetooth connection,selecting
PLAY in your device automatically establishes
the Bluetooth connection to the product and
the unit plays music.
1-2. If there are multiple devices for Bluetooth
connection including the product,
1) When you start the app, the list of the
devices which you can connect to the
product will appear.
2) Play music after connecting to the product
by selecting it on the list of devices.
-- If there exists a Bluetooth device paired to the
product before, it will not appear in the list and
be connected automatically.
2. If you replace the product which you have
paired to your mobile device, you should
delete the remaining settings saved in your
device before pairing to the new one.
• Tap
; Tap <Clear data>.
• The operation of the “Samsung Wireless
Audio with Dock ”may be different
depending on application's version.
✎✎NOTE
• Once you started the application, running is not
disturbed by charging your mobile device with an
ordinary charger.
• When you connect other device to the product after
English
31
Advanced Functions
Using the product with Samsung GALAXY
device
Advanced Functions
Using an iPod/iPhone
USB Function
Playing Media Files using the
USB Host Feature
If the system is connected to iPod/iPhone,You can play
music and video in iPod/iPhone using the system.
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 2.0
channel sound by connecting the storage device to
the USB port of the product.
PHONE
MIC
5V 500mA
1. Push the top panel manually ,you can see the iPod
Dock.
PHONE
2. Place the iPod/iPhone in the iPod Dock on the product
top panel.
• Your iPod/iPhone is automatically turned on.
3. Press the FUNCTION button to switch to R. IPOD or
IPOD mode.
MIC
5V 500mA
1. Connect the external USB storage device to the
USB jack of the main unit.
REMOTE IPOD
2. Select the USB mode by pressing the F(
)
button on the main unit.
• You can select USB by pressing the
FUNCTION button on the remote control.
IPOD
USB REC
3. Press the $%_+ buttons to select Videos,
Music or Photo.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB
device, perform safe removal before disconnecting
the USB cable.
• Press the YELLOW(C) button.
-R
EMOVE will appear on the display.
• Remove the USB cable.
✎✎NOTE
``
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
TV will have no output when play a
music file. You can adjust the
volume using the remote control.
Play and Search will be enabled in
your iPod player.
Video playback and file selection will
be enabled on the TV.The remote
control can be used for adjusting the
volume or playback settings.
• Remote iPod function only support AV output when
play Video file .
• No video will be displayed on the TV if the TV source
is HDMI/RGB mode.
iPod SYNC
Press and hold number 8 button set up remote iPod/iPod
SYNC.
• You can set the remote iPod /iPod delay time between 0
mSec and 1Sec. Set it to the optimal status.
Listening to Music (IPOD mode)
You can play music files stored in the iPod by
connecting it to the product.
Music
Function
32
English
iPod
05
2. Press the $%_+ buttons to select Music.
3. Select the music file to play.
• You can use the remote control or product to
control simple playback functions such as
PLAY, PAUSE, STOP, [, ], (, ) and
REPEAT.
✎✎NOTE
`` Adjust the volume to a moderate level before
you connect your iPod and product.
`` In Remote iPod mode and iPod mode, the
product will charge your iPod's battery.
iPod Music categories
File information including the artist name, album name,
music title and genre will be displayed according to the
ID3 Tag information on the appropriate music file.
Artist
To play by artist.
Generic
To play by genre.
Composers
To play by composer.
Playlist
To play by Playlist.
Album
To play by album.
Songs
To play in numeric or alphabetical order
✎✎NOTE
`` The category list may differ, depending on the
iPod model.
`` What is an ID3 Tag?
This is what is attached to an MP3 to carry
information relevant to the file such as the title,
artist, album, year, genre and a comment field.
iPod models that can be used
with this product
`` iPhone 4S
`` iPhone 4
`` iPhone 3GS
`` iPod touch (4th generation)
`` iPod touch (3rd generation)
`` iPod touch (2nd generation)
`` iPod nano (6th generation)
`` iPod nano (5th generation)
`` iPod nano (4rd generation)
`` iPod classic
✎✎NOTE
`` “Made for iPod/iPhone” means that an
electronic accessory has been designed to
connect specifically to iPod/
iPhone and has been certified
by the developer to meet
Apple performance standards.
`` Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
`` The volume control may not operated normally
with iPod models not listed above. If you have a
problem with any of the models listed above,
please update the software of the iPod to the
lastest version.
`` Depending on the software version of the iPod,
control problems may occur. This is not a
malfunction of this product.
`` Depending on the software version or the type
of the iPod, some operations may differ. Install
the latest iPod software. (recommended)
`` Playback of applications' contents through the
product may not be guaranteed. We
recommend playing contents downloaded on
the iPod.
`` If you have a problem using iPod, please visit
www.apple.com/support/ipod
English
33
Advanced Functions
1. Press the FUNCTION button to select IPOD
Advanced Functions
Recording Function
B
You can record sound of the CD, the Radio
Broadcasting or sound from the external source into
the USB storage device.
1. Switch the system on by pressing the Power
button.
2. Connect the external USB storage device you want
to record to the USB jack (
) of the main unit
3. Play a Disc, tune to a station or connect the
external source to the main unit.
CD
``
``
``
``
Press the F button on the main unit to select the
DVD/CD function.
Press the OPEN/CLOSE button to open the Disc
Compartment.
Insert a CD and press the OPEN/CLOSE button to
close the Disc Compartment.
Use the CD selection ( [ or ] ) button to select
the desired song.
Tuner
``
``
Press the F button on the main unit to select FM.
Tune to a station you want to record.
External Source
``
``
``
Connect an External Component/MP3 player to the
main unit.
Press the F button to select the AUX input.
Play a song from the external device.
4. Press the USB REC button to start recording.
CD
``
``
``
``
``
“TRACK RECORDING” is displayed
and CD recording starts.
Press and hold the USB REC button
to start recording the all tracks of the
Disc.
“FULL CD RECORDING” is displayed.
If you play the MP3/WMA file, the file is copied into
the USB device totally.
To copy a folder, highlight desired folder first and
press USB REC button, the folder is copied.
“COPY XX”“COPY END” is displayed. When the
recording is done, “STOP” will be displayed.
If there is duplicating file name, "FILE EXISTED" is
displayed, and the function is canceled.
Tuner/External Source
``
34
“RECORDING” is displayed.
English
5. To stop recording, press the STOP ( @ ) button
and it automatically creates and saves recorded
files in .MP3 format.
`` After the recording, a directory named
“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING” will be created
in your device.
✎✎NOTE
`` Do not disconnect the USB or the AC Cord during the
recording as this may cause damage to the file..
`` If you disconnected USB device during a recording, the
``
``
``
``
``
``
``
``
``
``
main unit will be powered off and you may not delete
the recorded file. In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
When the USB memory has insufficient free space, it
will display “NOT ENOUGH MEMORY”.
The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system
is not supported.)
When you use CD high speed search function, the CD
recording doesn't work.
Sometimes, the recording time may be longer with
some USB devices.
The equalizer is set to "OFF" automatically and becomes
not available during a CD recording.
The REPEAT function is set to "OFF" automatically and
becomes not available during a CD recording.
If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
You can not record the radio when searching or no
available station is found in the Tuner mode.
Note that setting the input level too loud when recording
music from an external device through the AUX and
USB channel may cause noise into the recording. In that
case, lower the external device’s volume level.
Up to 300MB of a video file can be recorded.
Recording Speed
You can select the recording speed before recording.
1. Each time you press the CD REC SPEED
button on the remote control, the recording
speed will change as following:
RECORD SPD x 1RECORD SPD x 3
`` While the Tuner or External Source is recording, the
recording speed does not supported.
`` When you select RECORD SPD x 3, the
audio sound will not be output.
✎✎NOTE
``
If you connected the Microphone, you just
have one recording speed mode: RECORD SPD x 1.
``
During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the
Microphone, it will still stop.
05
Other Information
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and
contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and
distance?
• Are the batteries drained?
• Disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Picture quality is poor and
picture is shaking.
Audio language and subtitles do
not work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not appear
even when the menu function is
selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN
SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc
jacket and then select the appropriate function.
English
35
Advanced Functions / 06 Other Information
Troubleshooting
Other Information
Symptom
Check/Remedy
• The product is not working.
(Example: The power goes out or
the front panel key doesn't work
or a strange noise is heard.)
• While “NO DISC” message appears on the display of the product, press and hold the
STOP (@) button on the main unit for longer than
5 seconds with no disc is inserted (reset function).
• The product is not working
normally.
The rating level password has been
forgotten.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
• While “NO DISC” message appears on the display of the product, press and hold the
main unit's STOP (@) button for longer than 5 seconds. “INIT” appears on the display
and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good
reception.
Language code list
Enter the appropriate code number for OTHERS of Disc Menu, Audio and Subtitle. (See page 19).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1142
Greek
1239
Interlingue
1345
Malagasy
1482
Kirundi
1527
1028
Abkhazian
1144
English
1245
Inupiak
1347
Maori
1483
Romanian
1528
Tajik
Thai
1032
Afrikaans
1145
Esperanto
1248
Indonesian
1349
Macedonian
1489
Russian
1529
Tigrinya
Turkmen
1039
Amharic
1149
Spanish
1253
Icelandic
1350
Malayalam
1491
Kinyarwanda
1531
1044
Arabic
1150
Estonian
1254
Italian
1352
Mongolian
1495
Sanskrit
1532
Tagalog
1045
Assamese
1151
Basque
1257
Hebrew
1353
Moldavian
1498
Sindhi
1534
Setswana
1051
Aymara
1157
Persian
1261
Japanese
1356
Marathi
1501
Sangro
1535
Tonga
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
Bashkir
1166
Fiji
1283
Javanese
1358
Maltese
1503
Singhalese
1539
Tsonga
1057
Byelorussian
1171
Faeroese
1287
Georgian
1363
Burmese
1505
Slovak
1540
Tatar
1059
Bulgarian
1174
French
1297
Kazakh
1365
Nauru
1506
Slovenian
1543
Twi
1060
Bihari
1181
Frisian
1298
Greenlandic
1369
Nepali
1507
Samoan
1557
Ukrainian
1069
Bislama
1183
Irish
1299
Cambodian
1376
Dutch
1508
Shona
1564
Urdu
1066
Bengali;
Bangla
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
Tibetan
1194
Galician
1301
Korean
1393
Occitan
1511
Albanian
1581
Vietnamese
1070
Breton
1196
Guarani
1305
Kashmiri
1403
(Afan) Oromo
1512
Serbian
1587
Volapuk
1079
Catalan
1203
Gujarati
1307
Kurdish
1408
Oriya
1513
Siswati
1613
Wolof
1093
Corsican
1209
Hausa
1311
Kirghiz
1417
Punjabi
1514
Sesotho
1632
Xhosa
1097
Czech
1217
Hindi
1313
Latin
1428
Polish
1515
Sundanese
1665
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
Chinese
1697
Zulu
1105
Danish
1229
Hungarian
1327
Laothian
1436
Portuguese
1517
Swahili
1109
German
1233
Armenian
1332
Lithuanian
1463
Quechua
1521
Tamil
1130
Bhutani
1235
Interlingua
1334
Latvian,
Lettish
1481
RhaetoRomance
1525
Tegulu
36
English
06
Other Information
Specifications
General
FM Tuner
Weight
1.95 Kg
Dimensions
230 (W) x 120 (H) x 230 (D) mm
Operating Temperature Range
+5°C~+35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.6 %
DVD (Digital Versatile Disc)
Disc(1 Disc)
CD : 12 cm (COMPACT DISC)
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Y : 1.0 Vp-p (75 Ω load)
Video Output
Component Video
Pr : 0.70 Vp-p (75 Ω load)
Video/Audio
HDMI
1080p, 1080i, 720p, 480p(576p)
speaker output
60 W/CH(4 Ω/100 Hz)
Frequency range
20Hz~20KHz
S/N Ratio
75dB
Channel separation
60dB
Input sensitivity
(AUX)800mV
Pb : 0.70 Vp-p (75 Ω load)
Amplifier
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
English
37
Other Information
Galaxy
Galaxy Compatibility
Compatibility List
compatibility
of the following
models is proved.
TheThe
compatibility
of following
model proved.
product
is compatible
gingerbread
2.3 version
or later.
ThisThis
product
is compatible
withwith
gingerbread
2.3 version
or later.
Phone Category
` Australia
S2 LTE
` Canada
Note
S2
S2 LTE
` China
Note
Note
Note
S2
S2
S2
` Europe
Galaxy Player
` Germany
Note
` Hong Kong
Note
S2
` India
Note
` Italy
S2
38
English
Model Name
GT-I9210
SGH-I717
GT-I9100
SGH-I727
GT-I9220
GT-I9228
SCH-I889
GT-I9100
GT-I9108
SCH-I919
YP-GB70
GT-N7000
GT-N7000
GT-I9100
GT-N7000
GT-I9100
GT-I9100
Phone Category
` Japan
Note
S2
S2 LTE
` Korea, Republic of
Galaxy Player
Galaxy Player
Note
S2
S2 LTE
` Malaysia
Note
S2
` Poland
S2
` Sweden
S2 LTE
` Thailand
Note
` Trinidad & Tobago
Note
` Tunisia
S2
` Turkey
Note
` USA
Note
S2
S2 LTE
Model Name
SGH-N054
SGH-N033
SGH-N034
YP-GB70
YP-GS1
SHV-E160
SHW-M250
SHV-E110
GT-N7000
GT-I9100
GT-I9100
GT-I9210
GT-N7000
GT-N7000
GT-I9100
GT-N7000
SGH-I717
SGH-I777
SGH-I727
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
Contact Center
Web Site
Area
Contact Center
0-800-555-555
0-88-555-55-55
8-10-800-500-55-500
0-800-61440
Web Site
Code No. AH68-02457X