Samsung MM-DT8 Instruction manual

Add to my manuals
34 Pages

advertisement

Samsung MM-DT8 Instruction manual | Manualzz

THIS APPLIANCE IS MANUFACTURED BY:

PERSONAL MICRO

COMPONENT SYSTEM

MM-DT8

MM-DT8S

Instruction Manual

AH68-01846k

V I D E O

COMPACT COMPACT

DIGITAL AUDIO DIGITAL VIDEO

1

Safety Warnings

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LASER CLASE 1

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE REAR COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION-INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCKS DEFEATED, AVOID

EXPOSURE TO BEAM.

This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.

This symbol alerts you to important operating and maintenance instructions accompanying the unit.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

(Saudi Arabian Standards Organization)

THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG.THE CUSTOMER IS

ENTITLED TO A FREE SASO APPROVED 127V PLUG FROM THE LOCAL DEALER.

EUROPE ONLY

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Precautions

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect AC main plug from the wall outlet.

Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources.

This could lead to overheating and malfunction of the unit.

Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.

Use of this product is for personal use only.

Condensation may occur if your player or disc have been stored in cold temperatures.

If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The battery used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash.

2

Features

Multi-Disc Playback & AM/FM Tuner, TAPE

The MM-DT8/MM-DT8S combines the convenience of multi-disc playback capability, including DVD, VCD,CD,DivX,WMA, MP3-CD, CD-R, CD-RW, and

DVD-RW, with a sophisticated AM/FM tuner, TAPE, all in a single player.

TV Screen Saver Function

The MM-DT8/MM-DT8S automatically brightens and darkens the brightness of the TV screen after 3 minutes in the stop .

Power Saving Function

The MM-DT8/MM-DT8S automatically shuts itself off after 20 minutes in the stop .

Customized TV Screen Display

The MM-DT8/MM-DT8S allows you to select your favorite image during

JPEG, DVD playback and set it as your background wallpaper.

V I D E O

DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall.

1 ~ 6

DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is given on the rear panel of the player.

(Your DVD player will only play DVDs that are labeled with identical region codes.)

Copy Protection

3

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your

DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Contents

PREPARATION

Safety Warnings..................................................................................................................................................................1

Precautions .........................................................................................................................................................................2

Features..............................................................................................................................................................................3

Description ..........................................................................................................................................................................5

CONNECTIONS

Connecting the Speakers....................................................................................................................................................9

Connecting to a TV............................................................................................................................................................. 10

Connecting to External Components...................................................................................................................................... 11

Connecting the FM and AM(MW) Antennas .......................................................................................................................12

P.SCAN (Progressive Scan) Function....................................................................................................................................13

Setting the Clock.................................................................................................................................................................14

OPERATION

Disc Playback .....................................................................................................................................................................15

Mp3/WMA-CD Playback .....................................................................................................................................................16

DivX Playback.....................................................................................................................................................................17

Displaying Disc Information ................................................................................................................................................18

Fast/Slow Playback.............................................................................................................................................................20

Skipping Scenes/Songs ......................................................................................................................................................21

Angle Function ....................................................................................................................................................................22

Repeat Playback.................................................................................................................................................................23

A-B Repeat Playback..........................................................................................................................................................25

Zoom Function ....................................................................................................................................................................26

Selecting Audio/Subtitle Language .....................................................................................................................................27

Moving Directly to a Scene/Song........................................................................................................................................28

JPEG File Playback ............................................................................................................................................................29

Using Disc Menu.................................................................................................................................................................31

Using the Title Menu ...........................................................................................................................................................32

SETUP

Setting the Language..........................................................................................................................................................33

Language Code List............................................................................................................................................................34

Setting TV Screen type .......................................................................................................................................................35

Setting Parental Controls (Rating Level).............................................................................................................................37

Setting the Password ..........................................................................................................................................................38

Setting the Wallpaper..........................................................................................................................................................39

Setting the DRC (Dynamic Range Compression)...............................................................................................................41

AV SYNC Setup..................................................................................................................................................................42

USB

Playing USB........................................................................................................................................................................43

Selecting a Track from USB Device....................................................................................................................................44

To use high speed search...................................................................................................................................................45

RADIO OPERATION

Listening to Radio ...............................................................................................................................................................46

Presetting Stations..............................................................................................................................................................47

TAPE DECK

Listening to a Cassette .......................................................................................................................................................48

Selecting the cassette Playback Mode/Repeat A↔B Function................................................................................................49

MISCELLANEOUS

Timer Function ....................................................................................................................................................................50

Canceling the Timer............................................................................................................................................................51

Recording a Compact Disc .................................................................................................................................................52

Recording a Radio Program ...............................................................................................................................................54

DSP/EQ/Sound Mode/Treble/Bass Function .....................................................................................................................55

Sleep Timer Function / Mute Function ................................................................................................................................56

DEMO / DIMMER Function.................................................................................................................................................57

Connecting Headphones/Microphone(option)................................................................................................................................58

Cautions on Handling and Storing Discs ............................................................................................................................59

Before Calling for Service ...................................................................................................................................................60

Notes on Discs....................................................................................................................................................................62

Notes on Terminology.........................................................................................................................................................63

Specifications......................................................................................................................................................................64

USB Feature Supported Player................................................................................................................................................65

4

Description

—Front Panel—

—Rear Panel—

1

2

3

6

7

4

5

1.

USB/AUX

2.

FUNCTIONS (DVD/CD/TUNER/TAPE)

3.

STANDBY/ON

4.

CD SYNCHRO / REC/PAUSE

5.

SEARCH FUNCTION BUTTONS

TUNING MODE OR STOP BUTTON

5

7.

HEADPHONE JACK CONNECTOR

8. MIC JACK

9. MIC VOL (OPTION)

10. CD DOOR OPEN/CLOSE

11. DSP/EQ

12. P.SOUND

13. VOLUME CONTROL

14. MULTI JOG/PUSH ENTER

14

9

8

13

12

11

10

RADIO ANTENNA

Speaker Output Terminals

Video Output Connector

Connect the TV's video input jacks

(VIDEO IN) to the VIDEO OUT connector.

FM Antenna Connector

AM Antenna Connector

AUX-Input

COMPONENT VIDEO OUTPUT jacks

Connect a TV with component video inputs to these jacks.

Accessories

FM Antenna Remote Control Video Cable

AM Antenna

User's Manual

6

Description

—Remote Control—

TUNER(BAND) button

DVD button

DVD POWER button

Number(0~9) buttons

REMAIN button

STEP button

SEARCH buttons

VOLUME button

MENU button

INFO button

ZOOM button

TITLE MENU button

SLOW, MO/ST button

DSP/EQ button

TIMER ON/OFF button

TUNING

MODE/REV.MODE button

TIMER/CLOCK button

7

TAPE button

AUX button

OPEN/CLOSE button

USB button

CANCEL button

REPEAT button

Play/Pause button

CD Skip button

TUNING button

Stop button

MUTE button

RETURN button

CURSOR/ENTER button

AUDIO button

SUB TITLE button

SLIDE MODE button

DIGEST button

REP A-B button

DEMO/DIMMER button

TUNER MEMORY /P/SCANbutton

CD SYNC button

EZ VIEW, NT/PAL button

SLEEP button

LOGO button

Insert Remote Batteries

1

Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.

2

Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).

3

Replace the battery cover.

Caution Follow these precautions to avoid leaking or cracking cells:

• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).

• Use the correct type of batteries.Batteries that look similar may differ in voltage.

• Always replace both batteries at the same time.

• Do not expose batteries to heat or flame.

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

8

Connecting the Speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Left Speaker Right Speaker

RADIO ANTENNA

Connecting to a TV

Please be sure to turn off the power and unplug the power cord before moving or installing this unit.

Please choose one of three video connection methods.

RADIO ANTENNA

METHOD 1 METHOD 2

Position of the DVD Player

• Place it on a stand or cabinet shelf, or under the TV stand.

Loudspeakers L R

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

• Place the speakers so that their tweeters will be at the same height as your ear.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the

TV. Example: For 32" TVs 2~2.4m (6~8feet)

For 55" TVs 3.5~4m (11~13feet)

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

• Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor.

The speaker near the TV or computer monitor may influence the quality of the screen display.

9

METHOD 1 Composite Video ...............

Good Quality

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.

METHOD 2 Component (Progressive Scan) Video ...............

Best Quality

If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.

10

Connecting to External

Components

Connecting to an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

RADIO ANTENNA

R L

Audio Cable

If the external analog component has only one Audio

Out, connect either left or right.

11

1

Connect Audio In on the DVD player to Audio Out on the external analog component.

• Be sure to match connector colors.

2

Press AUX to select AUX.

• ‘AUX’ appears in the display.

Connecting the FM and

AM(MW) Antennas

If FM reception is poor, connect an outdoor FM antenna (not supplied).

RADIO ANTENNA

FM Antenna (supplied)

AM Loop Antenna

(supplied)

FM antenna connection

1. Connect the FM antenna supplied to the FM 75Ω

COAXIAL terminal as a temporary measure.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

• If reception is poor, connect an outdoor antenna.

Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

AM (MW) antenna connection

1. Connect the AM loop antenna supplied to the AM and terminals.

2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

12

P.SCAN

(Progressive Scan)

Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

1

Press STOP button.

• If playing a disc, press the STOP button twice so that “ STOP”, appears on the display.

2

Press and hold P.SCAN button on the remote control for over 5 seconds.

• Pressing and holding the button for over 5 seconds will select " Progressive Scan" and "Interlace Scan" alternately.

• When you select P.SCAN, " P.SCAN" will appear on the display.

• To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than

5 seconds with no disc in the unit (“' NO DISC" on the display), then load the DivX disc and play.

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains every other horizontal line in the frame.

The odd field of alternating lines is displayed first, and then the even field is displayed to fill in the alternating gaps left by the odd field to form a single frame.

One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.

The interlaced scanning method is intended for capturing a still object.

The progressive scanning method scans one full frame of video consecutively down the screen, line by line.

An entire image is drawn at one time, as opposed to the interlaced scanning process by which a video image is drawn in a series of passes.

The progressive scanning method is desirable for dealing with moving objects.

13

Note • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support

Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)

• Depending on the capabilities of your TV, this function may not work.

Setting the Clock

For each step, you have a few seconds to set the required options.

If you exceed this time, you must start again.

1 Switch the system on by pressing

POWER button.

4

When the correct hour is displayed, press ENTER.

The minutes flash.

• Increase the minutes :

Decrease the minutes :

5

2

Press TIMER/CLOCK twice.

CLOCK is displayed.

3

Press ENTER.

The hour flashes.

• Increase the hours :

Decrease the hours :

When the correct time is displayed, press ENTER.

• " TIMER" appears in the display.

The current time is now set.

Note

• You can display the time, even when you are using another function, by pressing

TIMER/CLOCK once.

Selecting the Video Format

Turn off the main unit and then press and hold NT/PAL button on the remote controller for over 5 seconds .

• By default, the video format is set to "PAL".

• "NTSC" and "PAL" will appear in the display.

At this time,press the NT/PAL button shortly to select between “NTSC” and “PAL”.

• Each country has a different video format standard.

• For normal playback, the video format of the disc must be the same as the video format of your TV.

Checking the Remaining Time

Press the REMAIN button.

• For checking the total and remaining time of a title or chapter being played.

Each time the REMAIN button is pressed

TITLE ELAPSED TRACK ELAPSED

DVD

TITLE REMAIN

CHAPTER ELAPSED

CHAPTER REMAIN

VCD

CD

TRACK REMAIN

TOTAL ELAPSED

TOTAL REMAIN 14

Disc Playback

1

Press OPEN/CLOSE button to open the disc tray.

2 Load a disc.

• Place a disc gently into the tray with the disc’s label facing up.

3

Press OPEN/CLOSE button to close the disc tray.

DVD VCD CD

• Playback starts automatically.

MP3 DivX JPEG

• Playback starts automatically.

• If the TV is on, a list of MP3s on the CD will appear on the TV screen.

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

Note

• Depending on the content of the disc, the initial screen may appear different.

• Depending on the recording mode, some MP3-CDs cannot be played.

• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

To stop playback, press STOP during playback.

15

• If pressed once, “ PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE

( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

• If pressed twice, “STOP” is displayed, and if

PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

• To resume playback, press PLAY/PAUSE button again.

MP3/WMA-CD Playback

Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3/WMA format can be played.

1

Press the

OPEN/CLOSE button to open the disc tray, and then load the

MP3/WMA disc.

• The MP3/WMA menu screen will appear and playback will start.

• The appearance of the menu depends on the MP3/WMA disc.

• WMA-DRM files cannot be played.

2

In Stop mode, use to select the album, and then press the ENTER button.

• Use to select the track.

3

To change the album, use to select another album in Stop mode, and then press the

ENTER button.

• To select another album and track, repeat Steps 2 and 3 above.

4 Press the STOP button to stop playback.

Note

• Depending on the recording mode, some MP3/WMA-CDs may not play.

• Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.

To play a file icon in the screen,

Press the button when it is in stop status and select a desired icon from the top part of the menu.

• To play music files only, select the Icon.

• To view image files only, select the Icon.

• To view movie files only, select the Icon.

• To select all files select the Icon.

• Music File Icon

• Image File Icon

• Movie File Icon

• All File Icon

16

DivX Playback

Skip Forward/Back

During playback, press the button.

• Go to the next file whenever you press button, if there are over

2 files in the disk.

• Go to the previous file whenever you press button, if there are over

2 files in the disk.

Fast playback

Press button.

• Each time the button is pressed during playback, the playback speed changes as follows:

17

Zoom Function

1

Press ZOOM button.

2 Press Cursor , ,

, buttons to move to the area you want to enlarge.

• Each time you press the button, your selection will toggle between

ZOOM X2” and “ZOOM OFF”.

Note

• DivX files can be played in

Zoom X2 mode only.

5 Minute Skip function

During playback, press the , button.

• Go to the screen about 5 minutes after whenever you press button.

• Go to the screen about 5 minutes earlier whenever you press button.

Audio Display

Press the AUDIO button.

• If there are multiple audio tracks on a disc, you can toggle between them.

• Each time you press the button, your selection will toggle between “ AUDIO(1/1, 1/2 ...)” and “

”.

Note • " " is displayed when there is one supported language in the disc.

Subtitle Display

Press the SUBTITLE button.

• Each time you press the button, your selection will toggle between “ SUBTITLE ON” and “SUBTITLE OFF”.

• If the disc has only one subtitle file, it will be played automatically.

• Up to 8 subtitle languages are supported.

If the disc has more than one subtitle file

If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows:

1

In Stop mode, press the , , , button, select the desired subtitle

( ) from the TV screen, and then press the ENTER button.

2 When you select the desired DivX file from the TV screen, the movie will be played normally.

DivX Feature Table

DivX Supported

Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.

VIDEO Compatibility DivX3.11

Up to the latest VERSION

AUDIO Compatibility MP3

AC3

WMA

SPEC

CBR : 80kbps~320kbps

CBR : 128kbps~448kbps

CBR : 56kbps~160kbps

MPEGs containing DivX can be divided into Video and Audio.

Video compatibility : All versions of DivX later than 3.11 (including the latest 5.1) are supported. In addition, XviD is supported.

Audio compatibility : MP3s encoded at bitrates from 80kbps to

320kbps, AC3s from 128kbps to 448kbps are supported.

• In addition, for subtitles, this unit will support Text format (SMI).

Note

• When playing the DivX disk, you can play the file with extension of AVI only.

• Among the available DivX audio formats, DTS Audio is not supported.

• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.

18

Displaying Disc Information

You can view playback information on the disc on the TV screen.

Press INFO button.

• Each time the button is pressed, the display changes as follows:

DVD VCD CD

Display disappears

MP3 DivX JPEG

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

Display disappears

Display disappears

Note

• Depending on the disc, the disc information display may appear different.

• Depending on the disc, you can also select DOLBY DIGITAL, or PRO LOGIC.

• What is a Title?

A movie contained in a DVD disc.

• What is a Chapter?

Each title on a DVD disc is divided into several smaller sections called "chapters".

• appears on the TV screen!

If this symbol appears on the TV screen while buttons are being operated, that operation is not possible with the disc currently being played.

• What is a Track (File)?

A section of video or a music file recorded on a VCD, CD, or MP3-CD.

Screen Display

DVD display

TRACK (FILE) display AUDIO LANGUAGE display DOLBY DIGITAL display

VCD display

TITLE display ELAPSED TIME display SUBTITLE display

CHAPTER display

REPEAT PLAYBACK display STEREO (L/R) display ANGLE display

19

CD display

Fast/Slow Playback

Fast Playback

DVD VCD CD MP3

Press button.

• Each time the button is pressed during playback, the playback speed changes as follows:

Slow Playback

Press SLOW button.

• Each time the button is pressed during playback, the playback speed changes as follows:

DVD VCD DivX

Note • Reverse slow playback does not work with VCDs and DivX.

20

Skipping Scenes/Songs

DVD VCD MP3

Briefly press button .

• Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played.

• But, you cannot skip chapters consecutively.

DVD VCD MP3

TITLE 01/05 CHAPTER 002/040

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

TITLE 01/05 CHAPTER 004/040

DVD RECEIVER SMART NAVI

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

• When watching a VCD with a track longer than 15 minutes, each time is pressed, playback will skip back or forward 5 minutes.

Playing Frame by Frame DVD

Press STEP button.

• The picture moves forward one frame each time the button is pressed during playback.

Note

• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds.

• No sound is heard during slow playback and step motion playback.

21

Angle Function

This function allows you to view the same scene in different angles.

DVD

1

Press INFO button.

2 Press Cursor button to move to

ANGLE display.

1/3 1/3

3 Press Cursor , buttons or numeric buttons to select the desired angle.

• Each time the button is pressed, the angle changes as follows:

1/3

2/3

3/3

Note • The Angle function works only with discs on which multiple angles have been recorded.

22

Repeat Playback

Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).

DVD VCD CD MP3 JPEG

Press REPEAT button.

• Each time the button is pressed during playback, the repeat playback mode changes as follows:

DVD MP3 JPEG

VCD CD

Repeat Playback Options

CHAPTER

Repeatedly plays the selected chapter.

TITLE

Repeatedly plays the selected title.

RANDOM

Plays tracks in random order.

(A track that has already been played may be played again.)

TRACK

Repeatedly plays the selected track.

DIR

Repeatedly plays all tracks in the selected folder.

DISC

Repeatedly plays the entire disc.

OFF

Cancels Repeat Playback.

23

DVD VCD CD

To Select a Repeat Playback Mode in the Disc Information Screen

1

Press INFO button twice.

2 Press Cursor button to move to REPEAT

PLAYBACK display.

For a VCD or CD,Press INFO button once.

3

Press Cursor button to select the desired Repeat

Playback mode.

DVD

4

Press ENTER button.

VCD

CD

Note

• For MP3 and JPEG discs, you cannot select Repeat Play from the information display screen.

24

A-B Repeat Playback

DVD VCD CD

1

Press REP. AB at the beginning of the section you want to repeat.

REPEAT : A–

2 Press REP. AB at the end of the section.

REPEAT : A–B

To cancel AB Repeat Playback, press REP. AB to select " REPEAT PLAYBACK: OFF".

REPEAT : OFF

Note

• A–B Repeat Playback does not work on MP3 and JPEG discs.

A-B repeat playback does not work in USB mode,too.

• To select AB Repeat Playback from the information display screen, press REP. AB button.

25

Zoom Function

This function allows you to enlarge a particular area of the displayed image.

1

Zoom (Screen Enlarge) Function

DVD VCD

Press ZOOM button.

2 Press Cursor , ,

, buttons to move to the area you want to enlarge.

3 Press ENTER button.

• Each time the button is pressed, the zoom level changes as follows:

ENTER ZOOM

POSITION

Aspect Ratio

DVD

Press EZ VIEW button.

• Each time the button is pressed, the zoom function will switch between On and Off.

• When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button.

EZ VIEW EZ VIEW OFF

Note

• This function will not work if the DVD is recorded with multi-camera angle format.

• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.

26

Selecting Audio/Subtitle Language

1

Audio Language Selection Function

DVD

Press INFO button twice.

2 Press Cursor , buttons or numeric buttons to select the desired audio language.

• Depending on the number of languages on a

DVD disc, a different audio language (KOREAN,

ENGLISH, JAPANESE, etc.) is selected each time the button is pressed.

SP 2/3

FR 3/3

Note

• You can use the Audio button on the remote control to select a Audio language.

Subtitle Language Selection Function

DVD

1

Press INFO button twice.

2 Press Cursor button to move to

SUBTITLE display.

3

Press Cursor button or numeric buttons to select the desired subtitle.

EN 1/3 EN 01/ 03

SP 02/ 03

FR 03/ 03

OFF / 03

OFF

27

Note

• You can use the SUBTITLE button on the remote control to select a subtitle language.

• Depending on the disc, the Subtitle and

Audio Language functions may not work.

Moving Directly to a Scene/Song

DVD VCD CD

1

Press INFO button.

Moving to a Title/Track

2

Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTER button.

Moving to a Chapter

3 Press Cursor , buttons to move to

Chapter display.

01/05 001/040 0:00:37 1/1 03/05 001/002 0:00:01 1/1 01/05 001/040 0:00:01 1/1

Moving to a Chapter

4

Press Cursor , buttons or numeric buttons to select the desired chapter and then press ENTER button.

Moving to a Specific Time

5 Press Cursor , buttons to move to time display.

Moving to a Specific Time

6

Press the numeric buttons to select the desired time and then press ENTER button.

01/05 025/040 0:00:01 1/1 01/05 025/040 1:17:30 1/1 01/05 028/040 1:30:00 1/1

MP3 JPEG

Press the numeric buttons.

• The selected file will be played.

• An MP3 or JPEG disc cannot be moved from the disc information screen.

• When playing an MP3 or JPEG disc, you cannot use , to move a folder.

To move a folder, press (Stop) and then press , .

SELECT 03

DVD RECEIVER SMART NAVI

Move Select

Something like you

Back for good

Love of my life

More than words

I need you

My love

Uptown girl

Stop

Note

• You can press on the remote control to move directly to the desired title, chapter, or track.

• Depending on the disc, you may not be able to move to the selected title or time.

• As for VCD Version 2.0 disk, you can use TIME Search function in PBC

OFF mode.

28

JPEG File Playback

JPEG

Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this DVD player.

Slide Mode

1

Place the JPEG disc on the disc tray.

2

Press the OPEN/CLOSE button.

3 • Playback starts automatically.

• Each image is shown for 5 seconds before another image is displayed.

Press SLIDE MODE button.

• Playback starts automatically.

• Each time the button is pressed, the image makes the transition as follows:

From top to bottom

From bottom to top

29

Rectangular shape in the center

Vertical curtain shape

Each time a new image is displayed, slide modes

(1~11) will be randomly and automatically be applied.

Cancels the slide mode.

Press to skip to the next slide.

• Each time the button is pressed, the slide moves backward or forward.

Digest Function

You can view 9 JPEG images on the TV screen.

1 Press DIGEST button during playback.

• JPEG files will be shown in

9 windows.

2 Press Cursor , , , buttons to select the desired image and then press ENTER button.

• The selected image is played for 5 seconds before moving to the next image.

To view the previous or next image with 9 windows, press .

Rotate/Flip Function

Press Cursor , , , buttons during playback.

Original Image button: Flip Vertically button: Rotate 90°

Counterclockwise button: Rotate 90° Clockwise button: Flip Horizontally

30

Using Disc Menu

You can use the menus for the audio language, subtitle language, profile, etc.

DVD menu contents differ from disc to disc.

DVD

1 Press MENU button in the stop mode.

• When playing a VCD (version 2.0), this toggles between PBC ON and

OFF.

2 Press Cursor , buttons to move to

‘DISC MENU’ and then press ENTER button.

• When you select the disc menu that is not supported by the disc, the " This menu is not

supported" message appears on the screen.

3

Press Cursor , ,

, buttons to select the desired item.

4 Press ENTER button.

31

Note

PBC (Playback Control) Function

When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.

PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.

PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.

Using the Title Menu

For DVDs containing multiple titles, you can view the title of each movie.

Depending on the disc, this function may either not work at all or may work differently.

DVD

1 Press MENU button in the stop mode.

2 Press Cursor , button to move to

‘Title Menu’.

3 Press ENTER button.

• The title menu appears.

Note

• You can use the Title Menu button on the remote control to select Title Menu directly.

Press MENU button to exit the setup screen.

32

Setting the Language

OSD language is set to English by default.

1 Press MENU button in the stop mode.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3 Press ENTER button.

4

Press Cursor , button to select the desired item and then press ENTER button.

5

Press Cursor , button to select the desired language and then press ENTER button.

• Once the setup is complete, if the language was set to English, OSD will be displayed in English.

Note

• To select other language, select OTHER and enter the language code of your country.

(See 34 page for language code of countries)

AUDIO, SUB TITLE and DISC MENU language can be selected.

Selecting the

OSD Language

33

Selecting the

Audio Language

(recorded on the disc)

Selecting the

Subtitle Language

(recorded on the disc)

Selecting the Disc Menu

Language (recorded on the disc)

* If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 31).

Language Code

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian 1233

Bihari 1235

Bislama 1239

Bengali; Bangla 1245

Tibetan 1248

Breton 1253

Catalan 1254

Corsican 1257

Czech

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

1261

1269

1283

1287

1297

1298

1299

1300

1203

1209

1217

1226

1229

1181

1183

1186

1194

1196

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faeroese

French

1301

1305

1307

1311

1313

1326

1327

1332

Code

1097

1103

1105

1109

1130

1142

1144

1145

1059

1060

1069

1066

1067

1070

1079

1093

1045

1051

1052

1053

1057

1027

1028

1032

1039

1044

1149

1150

1151

1157

1165

1166

1171

1174

Language Code

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

1489

1491

1495

Kirghiz 1498

Latin 1501

Lingala 1502

Laothian 1503

Lithuanian 1505

1417

1428

1435

1436

1463

1481

1482

1483

1363

1365

1369

1376

1379

1393

1403

1408

1352

1353

1356

1357

1358

1334

1345

1347

1349

1350

Language Code

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Polish

Pashto, Pushto

1534

1535

1538

Portuguese

Quechua

1539

1540

Rhaeto-Romance 1543

Kirundi

Romanian

1557

1564

1517

1521

1525

1527

1528

1529

1531

1532

1512

1513

1514

1515

1516

1506

1507

1508

1509

1511

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangro

Serbo-Croatian

Singhalese

Slovak

1572

1581

1587

1613

1632

1665

1684

1697

Language

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Tegulu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

34

35

Setting TV Screen type

1 Press MENU button in the stop mode.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3

Press Cursor button to move to ‘TV

DISPLAY’ and then press ENTER button.

4

Press Cursor , button to select the desired item and then press ENTER button.

• Once the setup is complete, you will be taken to the previous screen.

Adjusting the TV Aspect Ratio (Screen Size)

The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor.

✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference. Select "16:9" if you have a wide screen TV.

WIDE

: Select this to view a 16:9 picture in the full-screen mode on your wide screen TV.

• You can enjoy the wide screen aspect.

4:3LB

(4:3 Letter box)

: Select this to play a 16:9 picture in the letter box mode on a conventional TV.

• Black bars will appear at the top and bottom of the screen.

4:3PS

(4:3 Pan&Scan)

: Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.

• You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).

Note

• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.

• Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

36

Setting Parental Controls (Rating Level)

Use this to restrict playback of adult or violent DVDs you do not want children to view.

1 Press MENU button in the stop mode.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3

Press Cursor button to move to

‘PARENTAL’ and then press ENTER button.

Setting the Password

You can set the password for the Parental (rating level) setting.

1

Press MENU button in the stop mode.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3

Press Cursor button to move to ‘PASSWORD’ and then press ENTER button.

4

Press Cursor , button to select the desired rating level and then press

ENTER button.

• If you have selected Level 6, you cannot view DVDs with Level 7 or higher.

• The higher the level, the closer the content is to violent or adult material.

5 Enter the password and then press

ENTER button.

• The password is set to "7890" by default.

• Once the setup is complete, you will be taken to the previous screen.

Note

• This function works only if a DVD disc contains the rating level information.

Press RETURN button to return to the previous level.

Press CANCEL button to cancel the error numeric when you inputting password .

37

Press MENU button to exit the setup screen.

4 Press ENTER button.

5 Enter the password and then press

ENTER button.

• Enter the old password, a new password, and confirm new password.

• The setting is complete.

Note

• The password is set to "7890" by default.

If you have forgotten the rating level password, do the following:

• While the player is in the no disc mode, hold the main unit's TUNING MODE/ button for longer than 5 seconds.

“INITIALIZE” appears on the display and all settings will return to the default values.

• Press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

38

Setting the Wallpaper

JPEG DVD

While watching a DVD, VCD, or JPEG CD, you can set the image you like as a wallpaper.

VCD

Setting the Wallpaper

1

During playback, press

PLAY/PAUSE button when the image you like comes up.

2 Press LOGO button.

• “ LOGO COPY DATA” will be displayed on the TV screen.

LOGO COPY DATA

PAUSE

1

To Change the Wallpaper

Press MENU button in the stop mode.

2

Press Cursor button to move to

‘Setup’ and then press ENTER button.

3

Press Cursor button to move to

‘LOGO’ and then press ENTER button.

3

The power will turn off and then back on and will play the disc automatically.

• The selected wallpaper will be displayed.

4

Press to select the desired ‘USER’, and then press

ENTER .

5 Press MENU button to exit the setup screen.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

39

Select this to set the

Samsung Logo image as your wallpaper.

Select this to set the desired image as your wallpaper.

40

Setting the DRC (Dynamic Range Compression)

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

1

Press MENU button in the stop mode.

2 Press Cursor button to move to ‘Audio’ and then press ENTER button.

AV SYNC Setup

Video may look slower than the audio if it is connected with digital TV.

In this case, adjust the delay time of audio to optimal status to fit the video.

1

Press the MENU button in the stop mode.

• Setup menu appears.

2 Press Cursor , buttons to move to ‘Audio’ and then press ENTER button.

• 'Audio' menu appears.

3

If “ DRC” is selected, press ENTER .

4 Press Cursor , to adjust the ‘DRC’.

• The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect.

3 Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button.

• AV-SYNC screen appears.

4

Press Cursor , buttons to select the Delay Time of

AV-SYNC and then press the

ENTER button.

• You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

41

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

42

Playing USB

You can play MP3 files by connecting to various external USB storage devices such as USB flash memory or HDD. time.

1 Connect the external USB storage device to your player.

2 Select USB function by using the USB button.

• The first track of the first directory plays automatically.

• Do not connect USB charging device to the

USB connection port of the player, because it may cause damage to the product.

To stop playing

Press the Stop ( ) button to stop playing.

• Press the Stop ( ) button once to pause, and press the button twice to stop completely.

Please be aware of the following before using USB.

• Depending on the type of external USB storage device, it may not work even if it’s connected to the player.

• With external HDD, FAT format can be played, but not NTFS format.

• With USB 2.0 HDD, connect to a separate power source.

If it’s not connected to a separate power source, it may not work.

• If memory of an external USB storage device is segmented into several parts, MP3 files of only the first hard disk drive can be played.

• Regarding directories, up to fourth directory can be played.

• DRM applied files are not played.

Digital Rights Management: Technology and service that protect the profit and rights of copyright owners by disallowing unauthorized use of digital contents.

• Even if the file name ends with .mp3, the file does not play if actual file format is MPEG layer 1 or 2.

• Disconnect the external USB storage device only in safe removal mode(“USB REMOVE” display ON/OFF).

Otherwise, internal file can be damaged.

Press the Stop ( ) button more than 3 times to get into the safe removal mode.

If you want to play files in the safe removal mode, disconnect and reconnect the external USB storage device.

• USB hub will not be recognized.

• Directory names are shown up to 14 letters, and MP3 file names up to 30 letters.

Delay

• When selecting USB function, depending of the speed of the external USB storage device, reading (READ-IN) internal information can take several minutes.

• When playing a USB device, recording or finding next track may introduce some delay. Especially with a mass storage device such as HDD, depending on the type and the number of files, the delay might be several minutes.

• Even with the external USB storage devices of same capacity, depending on the speed of each product, the amount of operating time can vary.

• If the external USB storage device supports only USB VER 1.1 and the access speed is slow, the recording may not work well or noise can be recorded.

43

• The USB function of this product does not support all USB devices.

For the information on the supported devices,pls see the page 65.

Selecting a Track from USB

Device

You can select a desired directory and an MP3 file during the play or when it stopped.

Before you begin!

Connect the external USB storage device to your player.

Select USB function by using the USB button.

1

Press the Cursor , buttons to move the directory.

• Each time you press the button, it will move to the directory before or after.

• This function works only in the remote control.

2 If you want to move the file, press the , button shortly.

• It moves the file within the directory.

• If you press the , button more times than the number of the files in the directory, it will move over to the next directory.

44

To use high speed search

Before you begin!

Connect the external USB storage device to your player.

Select USB function by using the USB button.

You can search the part you want quickly during the play

Press the , button.

• Whenever you press the button, you can search backward or forward 2X ➝ 4X ➝ 8X ➝ 32X

➝ OFF times quickly.

• When you use the high speed search function (4X,8X,32X)

, there is no sound.

To repeat

Press the REPEAT button during the play.

• REPEAT RANDOM : Plays tracks in random order.

(A track that has already been played may be played again.)

• REPEAT 1 : repeat play one track only.

• REPEAT Dir : repeat play the folder .

• REPEAT ALL : repeat play the entire directories.

45

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

Remote Control Unit

1 Press TUNER/

BAND button.

2 Tune in to the desired station.

Automatic Tuning 1

Press the STOP ( ) or Tuning

Mode button to select PRESET and

TUNING then press button to select the preset station.

Press the STOP ( ) or Tuning

Automatic Tuning 2

Mode button to select " AUTO" and

TUNING then press button to automatically search the band.

Manual Tuning Press the STOP ( ) or Tuning

Mode button to select" MANUAL",Briefly press

TUNING to increase or decrease the frequency incrementally.

Main Unit

1

Press the Function button to select the desired band

(FM/AM).

2 Select a broadcast station.

Automatic Tuning 1

Press the STOP ( ) or Tuning

TUNING

Mode button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2

Press the STOP ( ) or Tuning

Mode button

TUNING to select " AUTO" and then press button to automatically search the band.

Manual Tuning

Press STOP ( ) or Tuning Mode to select MANUAL and then

TUNING briefly press higher frequency.

to tune in to a lower or

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

• Each time the button is pressed, the sound switches between "STEREO" and "MONO".

• In a poor reception area, select MONO for a clear, interference-free broadcast.

46

Presetting Stations

You can store up to:

15 FM stations

15 AM stations

• FM

• AM(MW)

Frequency Modulation

Medium Wave

Example: Presetting FM 89.1 in the memory

1

Press the

TUNER(BAND) button and select the FM band.

2 TUNING

Press to select "89.10".

• Refer to Step 2 on page 44 to automatically or manually tune in to a station.

MHz kHz

MHz kHz

3

Press the TUNER

MEMORY button.

• “ PRGM” flashes in the display.

MHz kHz

4

TUNING

Press to select preset number.

• You can select between 1 and

15.

5

Press the TUNER

MEMORY button.

• Press the TUNER MEMORY button before

PRGM’ disappears from the display.

• ‘ PRGM’ disappears from the display and the station is stored in memory.

6 To preset another station, repeat steps 2 to 5.

MHz kHz

MHz kHz

47

TUNING

To tune in to a preset station, press on the remote control to select a channel.

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled

“Precautions When Using Audio Cassettes” on page 59.

1 Switch the system on by pressing

POWER .

2 Press TAPE on the player to select the Tape function.

3 Press the PUSH

EJECT ( ) of the cassette deck to open the cassette door and insert a cassette.

• Insert a cassette with the recording/playback side facing the cassette holder, and then push the cassette door shut.

4 Press the button. The cassette starts playing.

• Side A : Tape ( ) button once.

• Side B : Tape ( ) button twice.

5 Press the , button if necessary.

• Rewind the cassette / DOWN button.

• Fast-forward the cassette UP / button.

6 When you have finished playback, press STOP button.

48

Selecting the cassette Playback

Mode/Repeat A ↔ B Function

Selecting the Cassette Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press REV.MODE until the appropriate symbol is displayed.

• When the display indicates...The micro component system plays back

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

REPEAT A ↔ B Function

Press REP. A ↔ B button.

• Use this to listen to a specific section again during playback.

• Set the start and end points of the section you want to repeat 3 times.

• This is a useful when learning a foreign language.

• The TAPE REPEAT function can be used only on sections that are longer than 7 seconds.

Note • You cannot set the end point (B) within 7 seconds after setting the start point (A).

49

Timer Function

• The timer enables you to switch the system on or off at specific times.

• If you no longer want the system to be switched on or off automatically, you must cancel the timer.

• Before setting the timer, check that the current time is correct.

• For each step, you have a few seconds to set the required options.

If you exceed this time, you must start again.

Example: You wish to wake up to music every morning.

1 Switch the system on by pressing

POWER .

2

Press

TIMER/CLOCK until TIMER is displayed.

3 Press the ENTER button.

ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

6

Press or button to adjust the volume level and press

ENTER .

• The source to be selected is displayed.

4

Set the timer switch-on time.

5 Set the timer switch-off time.

a . Set the hour by pressing or button.

b.

Press ENTER .

• The minutes flash.

c.

Set the minutes by pressing or button.

d.

Press ENTER .

OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switchoff time already set; you can now set the timer switch-off time.

7

Press or button to select the source to be played when the system switches on.

• TAPE (cassette) : Insert a cassette tape.

• TUNER (radio) : a Press ENTER .

b Select a preset station by pressing

Tuning or .

• CD (compact disc) : Load a compact disc.

a . Set the hour by pressing or button.

b.

Press ENTER .

• The minutes flash.

c.

Set the minutes by pressing or button.

d.

Press ENTER .

VOL 20 is displayed, where 20 corresponds to the volume already set.

8 Press ENTER to confirm the timer.

9

Press POWER to set the system to standby mode.

• is displayed to the top-right of the time, indicating that the timer has been set.

• The system will switch on and off automatically at the required times.

Note

• If the timer switch on and off times are identical, the word ERROR is displayed.

50

51

Canceling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display.

If you no longer wish to use the timer, you must cancel it.

Recording a Compact Disc

You can record a compact disc on a cassette in two different ways:

Synchronized recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

To cancel the timer, press TIMER ON/OFF once.

• is no longer displayed.

To resume the timer, press TIMER ON/OFF again.

• is displayed again.

Note

• You can cancel the timer while the power is on or while the player is in standby.

1 Switch the system on by pressing

POWER .

4 Press the DVD/CD

( ) button.

• Use the CD selection ( , ) buttons to select the desired song.

2 Insert a blank cassette in Deck.

• Press the PUSH/EJECT button ( ) to open the cassette door, insert a cassette, and then close the cassette door.

• Insert the cassette with the safety tabs.

3 Load a compact disc.

• Press the OPEN/CLOSE button ( ) to open the CD door.

• Insert a CD and press the

OPEN/CLOSE button ( ) to close the CD door.

5 Press and hold CD

SYNC. button.

• When stopped, press the button to start the recording from the first piece of music.

• Press and hold CD SYNC. button during the playback of CD to start the recording from the first part of the music being played.

6 To stop recording, press button.

Note • Treble,Bass,DSP/EQ,and Power sound function don’t work during the recoding.

• Synchronized recording Function is available for CD only.

52

Recording a Radio Program

You can record a radio program of your choice.

You do not need to adjust the volume, as it has no effect on the recording.

Direct recording

The direct recording mode enables you to start recording with any track on the compact disc.

1 Switch the system on by pressing

POWER .

4 Press the DVD/CD

( ) button.

• Use the CD selection ( , ) buttons to select the desired song.

2 Insert a blank cassette in Deck.

• Press the PUSH/EJECT button ( ) to open the cassette door, insert a cassette, and then close the cassette door.

• Insert the cassette with the safety tabs.

3 Load a compact disc.

• Press the OPEN/CLOSE button ( ) to open the CD door.

• Insert a CD and press the

OPEN/CLOSE button ( ) to close the CD door.

5

Press

REC/ PAUSE button.

• Recording will begin.

• To stop recording, press button.

Note

• The cassette tape you want to record on must have the safety tabs intact.

53

1 Switch the system on by pressing

POWER .

2 Insert a blank cassette in Deck.

3

Select the

TUNER function by pressing

TUNER/BAND .

4 Select the radio station that you wish to record by pressing

/DOWN or UP/ button .

5 Press REC/PAUSE button.

REC is displayed in red and recording starts.

6 To stop recording, press button.

54

DSP/EQ/Sound Mode/Treble/Bass Function

Your micro component system is equipped with a preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you are listening to.

The function of Power Sound amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound.

Sleep Timer Function / Mute Function

Sleep Timer Function

You can set the time that the DVD player will shut itself off.

Press SLEEP button.

• Each time the button is pressed, the selection changes as follows:

90 MIN 60 MIN 45 MIN 30 MIN 15 MIN SLEEP OFF.

MHz

DSP/EQ Function Selecting SOUND MODE

Press DSP/EQ control until the required option is selected.

Press the button repeatedly to select “ PASSPOPS

JAZZROCKSTUDIOCLUBHALLMOVIE

CHURCHPASS”.

Treble Level Function

Treble Control function stresses high tones providing thudding sound effects.

Press P.SOUND button until the required option is selected.

• Press the button repeatedly to select “ S.BASSP.SOUND”.

S.BASS Function : S.Bass function emphasizes the bass sound to produce the effect of explosion or booms.

P.SOUND Function : You can experience the powerful and realistic sound by amplifying bass and improving the sound quality of high- and low-pitched sounds by two-fold.

Bass Level Function

BASS function stresses low tones providing thudding sound effects.

Press MULTI JOG(PUSH ENTER) button until TREB 00 is displayed.

Turn MULTI JOG(PUSH ENTER) knob to select from

TREB -18 to TREB 18.

• You can select the level of high tones you desire.

55

Press MULTI JOG(PUSH ENTER) button until BASS 00 is displayed.

• Turn MULTI JOG(PUSH ENTER) knob to select from BASS

-18 to BASS 18.

• You can select the level of low tones you desire.

To confirm the sleep timer setting, press SLEEP button.

• The remaining time before the DVD player will shut itself off is displayed.

• Pressing the button again changes the sleep time from what you have set earlier.

To cancel the sleep timer, press SLEEP button until

SLEEP OFF appears on the display.

Mute Function

This is useful when answering a doorbell or telephone call.

Press MUTE button.

• ‘ MUTE ’ appears in the display.

• To turn off mute, press the button again.

56

DEMO / DIMMER Function

DEMO Function

You can view the various functions available on your system.

Press DEMO/DIMMER button.

• The various functions available are listed in turn on the display.

• All these functions are described in detail in this booklet.

For instructions on how to use them, refer to the appropriate sections.

DIMMER Function

You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.

Press DEMO/DIMMER button.

• Each time the button is press, the brightness changes as follows: DEMO ➞ DIMMER ON(Dim) DIMMER

OFF(Bright).

57

To cancel this function, press

DEMO/DIMMER again.

Connecting Headphones/Microphone(option)

You can connect a set of headphones to your micro component system so that you can listen to music or radio programmers without disturbing other people in the room.

The earphones must have a 3.5ø jack or an appropriate adapter.

Connect the headphones to the PHONES jack on the front panel.

• The loudspeakers are no longer used to output the sound.

Note

• Prolonged use of headphones at a high volume may damage your hearing.

Plug the microphone with a 3.5ø MIC jack into microphone terminal.

• Connect the Microphone.

• Turn the MIC LEVEL knob to adjust the MIC level.

• During using the microphone ,you can press the REC/PAUSE button to record your favorite.

58

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Handling and Storing Discs

When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

• When cleaning, wipe gently from the inside to the outside of the disc.

Note • Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.

Precautions When Using Audio Cassettes

• Check that the tape in the cassette is sufficiently taut.

• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape.

• When you have finished playing a cassette, always put it back in its case.

• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures.

• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.

59

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom Check/Remedy

Disc tray does not open.

• Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

Playback does not start.

The remote control does not work.

• Check the region number of the DVD.

DVD discs purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this DVD player.

• Make sure that the rating level is correct.

• Is the remote control being operated within its operation range of angle and distance?

• Are the batteries exhausted?

Playback does not start immediately when the

Play/Pause button is pressed.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

Sound is not produced.

• No sound is heard during fast playback, slow playback, and step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

Picture does not appear, sound is not produced, or the disc tray opens 2 to 5 seconds later.

• Was the DVD player suddenly moved from a cold place to a warm one? When condensation forms inside the player, remove the disc and let the player stand for 1 or 2 hours with the power on. (You can use the player again after condensation disappears.)

• Disc is rotating but no picture is produced.

• Picture quality is poor and picture is shaking.

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

60

Symptom Check/Remedy

Audio language and subtitles do not work.

Menu screen does not appear even when the menu function is selected.

Aspect ratio cannot be changed.

The tape does not start playing

The volume falls off

The cassette is not erased correctly

There is excessive wow and flutter

Can't receive radio broadcast.

• The main unit is not working.

(Example: The power goes out or strange noise is heard.)

• The DVD player is not working normally.

The password for rating level has been forgotten.

• Audio language and subtitles will not work for DVDs not containing them. And depending on the disc, they may work differently.

• Are you using a disc that does not contain menus?

• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function.

• The TAPE function has not been selected.

• The cassette has not been inserted correctly.

• The cassette player has not been closed.

• The tape is either slack or broken.

• The audio heads are dirty.

• The rollers or drive capstans are dirty.

• The tape is worn.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

• Turn off the power and hold the STOP button on the main unit for longer than 5 seconds.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

• While the player is in the No Disc mode, hold the main unit's TUNING

MODE/ button for longer than 5 seconds. “INITIAL” appears on the display and all settings will return to the default values.

• Press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

61

Notes on Discs

Disc Recording Format

CD-R Discs

• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable.

• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.

• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.

• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc.

CD-R MP3 Discs

• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.

• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

• If the name of a file is in Korean, the name will be displayed on the TV screen in Korean and * will be shown in the display of the main unit.

• Use discs recorded with a compression/decompression data rate greater than 128Kbps.

• Only files with the ".mp3" and ".MP3" extensions can be played.

• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.

• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.

• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,

32Kbps ~ 320Kbps), the sound may skip during playback.

• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.

• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.

What is MP3?

MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts

Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3 format to record about 12 times the usual amount of data on a regular CD.

CD-R JPEG Discs

• Only files with the ".jpeg" and ".JPEG" extensions can be played.

• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.

• A maximum of 9,999 images can be stored on a single CD.

• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.

• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.

62

Notes on Terminology

63

ANGLE

CHAPTER

NUMBER

DVD

Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc.).

With such discs, the Angle button can be used to change the angle of view for specific scenes.

These numbers are recorded on DVD discs. A Title is subdivided into many sections, each of which is numbered, and specific parts of the video can be searched quickly using these numbers.

A high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG-2) and high-density recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.

An acronym for Pulse Code Modulation - another name for digital audio.

This is recorded on a video CD (version 2.0). Selected scenes or information can be chosen from the menu displayed on the TV monitor.

PCM

PBC

(PLAYBACK

CONTROL)

REGION NUMBER

SUBTITLES

TITLE NUMBER

TRACK NUMBER

VIDEO CD

Both the DVD player and DVD discs are encoded with a region number.

If the region number on the DVD disc does not correspond to the region number of the DVD player, the player cannot play the disc.

Translated appearing at the bottom of the screen. A DVD disc can contain up to

32 subtitle languages.

These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as Title 1, Title 2, etc.

These numbers are assigned to the tracks which are recorded on video and audio CDs. They enable specific tracks to be located quickly.

Contains recordings of pictures and sound whose quality is roughly comparable to that of video tape.

This player also supports video CDs with playback control (version 2.0).

5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs recorded as a digital signals (with disc marking). With better sound quality, dynamic range, and directionality than traditional Dolby surround technology, you can enjoy dynamic, realistic sound.

Specifications

K

E

R

E

A

S

P

I

F

I

E

R

A

M

P

L

F

M

MW T

U

N

E

R

T

U

N

E

R

R

A

L

G

E

N

E

Weight

Dimensions (W x H x D)

Operating Temperature Range

Operating Humidity Range

Usable Sensitivity

S/N Ratio

Distortion

Usable Sensitivity

S/N Ratio

Distortion

Composite Video

VIDEO

OUTPUT

Component Video

Speaker output

Frequency range

S/N Ratio

Channel separation

Input sensitivity

Impedance

Frequency range

Output sound pressure level

Rated input

Maximum input

Dimensions (W x H x D)

Weights

2.7Kg

170 x 232 x 332 mm

+5°C~+35°C

10%~75%

3dB

60dB

1.0%

56dB

40dB

2%

1.0Vp-p(75Ω load)

Y : 1.0Vp-p(75Ω load)

Pr : 0.286Vp-p(75Ω load)

Pb:0.286Vp-p(75Ω load)

50W/CH

20Hz~20kHz

75dB

50dB

(AUX)500mV

4Ω x 2

20 Hz - 20 KHz (± 1 dB)

84dB/W/M

50W

100W

145(W) x 233 (H) x 205(D) mm

4.1 Kg

64

USB Feature Supported Player

Digital Camera

Product

Coolpix 3500

Coolpix 3700

Coolpix 4100

Coolpix 5200

Stylus 410 digital

300-digital

U300

X-350

C-760

C-5060

X1

U-mini

Lumix-FZ20

DMC-FX7GD

Lumix LC33

LUMIX DMC-F1

Optio-S40

Finepix-A340

Finepix-F810

Finepix-F610

Finepix-f450

Finepix S7000

Finepix A310

KD-310Z

Finecam SL300R

Finecam SL400R

Finecam S5R

Finecam Xt

Dimage-Z1

Dimage Z1

Dimage X21

Coolpix4200

Coolpix4300

Coolpix 2200

Optio-S50

Optio 33LF

Optio MX

Digimax-420

Digimax-400

Sora PDR-T30

Coolpix 5900

Coolpix S1

Coolpix 7600

DMC-FX7

Dimage Xt

AZ-1

Company

Nikon

Nikon

Nikon

Nikon

Olympus

Olympus

Olympus

Olympus

Olympus

Olympus

Olympus

Olympus

Panasonic

Panasonic

Panasonic

Panasonic

Pentax

Pentax

Pentax

Pentax

Samsung

Samsung

Toshiba

Nikon

Nikon

Nikon

Panasonic

Minolta

Olympus

Fuji

Fuji

Fuji

Fuji

Fuji

Fuji

Konica

Kyocera

Kyocera

Kyocera

Kyocera

Minolta

Minolta

Minolta

Nikon

Nikon

Nikon

Type

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

Digital Camera

USB Flash Disk

Product

Cruzer Micro

Cruzer Mini

Cruzer Mini

SONY Micro Vault

FLEX DRIVE

AnyDrive

XTICK

Micro Mini iFlash

LG

RiDATA

Company

Sandisk

Sandisk

Sandisk

Sony

Serotech

A.L tech

LG

Iomega

Imation

XTICK(M)

EZDrive

Type

USB 2.0 USB Flash Drive 128M

USB 2.0 128M

USB 2.0 256M

USB 2.0 64MB

USB 2.0 32MB

USB 2.0 128MB

USB 2.0 128M

USB 2.0 128M

USB 2.0 64M

USB 2.0 64M

USB 2.0 64M

MP3 Player

Product

Creative MuVo NX128M

Iriver H320

YH-920

YP-T7

YP-MT6

YP-T6

YP-53

YP-ST5

YP-T5

YP-60

YP-780

YP-35

YP-55 iAUDIO U2 iAUDIO G3 iAudio M3

SI-M500L

H10

YP-T5 VB

YP-53

Company

Creative

Iriver

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

Cowon

Cowon

Cowon

Sharp

Iriver

Samsung

Samsung

Type

128 MB MP3 Player

20G HDD MP3 Player

20G HDD MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

MP3 Player

HDD MP3 Player

256MB MP3 Player

MP3 Player

MP3 Player

256MB MP3 Player

Multi Card Reader

Product

UNICORN

USB 2.0 Card Reader

Company Type

Unicorn USB 2.0 7 IN 1 CARD READER UC-601R

Billionton(Taiwan) USB 2.0 Card Reader for SD/MMC/RS-MMC(3-in-1)

USB External HDD

Product

CUTIE

MOMOBAY UX-2

Company

Serotech

Dvico

Type

POCKET HARD DISK DRIVE

USB 2.0

65

I f you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

66

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents