ED30, ID30
Revised
01/08/08
30” Wide Dishwashers
PLANNING
GUIDE
1/2
1 1/8"
(29mm)
23 3/4” (603mm)
36 1/4"
(921mm)
to
34"
(864mm)
ED Door Panel
Height
29 5/8" (752mm)
ID Door Panel
Height
26 7/8" (683mm)
1 5/8"
(41mm)
Adjustable
Toe-kick
Front Plate
19 1/4" (489mm) to
20 1/4" (514mm)*
47" (1194mm)*
* Allows for drain hose on back of unit
Side View - Door OpeN
Side View - Door Open
Anti-tip anchor into material under
countertop or adjacent cabinets
ED or ID30 – 29 7/8" (759mm)
90˚
90˚
24" Min.
(610mm)
5"
(127mm)
34”
(864mm)
to
36 1/4"
(921mm)
Utilities Access Hole
8"
(203mm)
Cycle ON indicating lights
ED or ID30 – 30" Min. (762mm)
Front View
Model No.
Power Requirements
ED30
15 A, 120 Vac, 60 Hz dedicated, grounded, three
prong power outlet. See model number label on
product for total connected loaded.
ID30
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Cut-Out Front View
Water
Pressure
20 to 120 psi
(138 - 827 kPa)
Water
Temperature
Approximate
Shipping Weight
215 lbs.
120°F, minimum
218 lbs.
Specifications are subject to change without notice.
See installation instructions for additional details.
10.1
ED30, ID30
Revised
01/08/08
30” Wide Dishwashers
2/2
PLANNING
GUIDE
custom panel installation (ID30 Only)
Model No.
Width
Maximum Height
Maximum Thickness
ID30
29 7/8” (760mm)
30” (762mm)*
3/4” (19mm)
custom panel overall dimensions
(ID model only)
*Without installation of a custom toe kick, see template included with product
for further details.
1/2"
(13mm)
6 7/8"
(175mm)
7/16" (11mm)
Conterbalance
screw
18"
(457mm)
Adjusting the Dishwasher Door
Custom Panel Hole Alignment
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
10.2