Samsung 81.28cm (32) HD Flat TV FH4003 Series 4 User Manual

Important Safety Instructions
Getting Started
Accessories
LED TV
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Country
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
recommendations:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture format menu for
best possible match.
yy Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
For India Only
This product is RoHS compliant.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking on the product & accessories literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources House hold users
should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business user should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed other commercial
wastes for disposal.
Customer Care Centre
RISKOFELECTRICSHOCK.DONOTOPEN
Thissymbolindicatesthathighvoltageispresentinside.It
isdangeroustomakeanykindofcontactwithanyinternal
partofthisproduct.
CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVE
COVER(ORBACK).THEREARENOUSERSERVICEABLEPARTSINSIDE.REFERALLSERVICINGTOQUALIFIEDPERSONNEL.
Thissymbolindicatesthatimportantliteratureconcerning
operationandmaintenancehasbeenincludedwiththis
product.
AUSTRALIA
1300 362 603
www.samsung.com/au/support
0800 SAMSUNG (0800 726
786)
www.samsung.com/nz/support
CHINA
400-810-5858
www.samsung.com/cn/support
HONG KONG
(852) 3698 4698
www.samsung.com/hk/support
(Chinese)
www.samsung.com/hk_en/
support (English)
MACAU
0800 333
www.samsung.com/support
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
www.samsung.com/in/support
INDONESIA
021-56997777
08001128888
www.samsung.com/id/support
JAPAN
0120-363-905
www.samsung.com/jp/support
MALAYSIA
1800-88-9999
603-77137477 (Overseas
contact)
www.samsung.com/my/
support
PHILIPPINES
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe
landline and Mobile]
02-4222111 [Other landline]
www.samsung.com/ph/support
SINGAPORE
1800-SAMSUNG(726-7864) www.samsung.com/sg/support
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th/support
TAIWAN
0800-32-9999
www.samsung.com/tw/support
VIETNAM
1 800 588 889
www.samsung.com/vn/support
GEORGIA
0-800-555-555
www.samsung.com/support
ARMENIA
0-800-05-555
www.samsung.com/support
AZERBAIJAN
0-88-555-55-55
www.samsung.com/support
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com/support
For more information on safe disposal and recycling visit our website www.
samsung.com/in or contact our helpline number - 18002668282, 180030008282
KYRGYZSTAN
8-10-800-500-55-500
www.samsung.com/kz_ru/
support
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com/support
For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and may not be
available in all regions.
MONGOLIA
7-495-363-17-00
www.samsung.com/support
BELARUS
810-800-500-55-500
www.samsung.com/support
MOLDOVA
0-800-614-40
www.samsung.com/support
ALGERIA
021 36 11 00
www.samsung.com/n_africa/
support
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/support
TUNISIA
80-1000-12
www.samsung.com/n_africa/
support
MYANMAR
01-2399888
www.samsung.com/support
BANGLADESH 09612300300
www.samsung.com/in/support
SRI LANKA
www.samsung.com/support
DVD / Home Theater
Assembling the Cable Holder
yy PC/DVI AUDIO IN input is not supported.
yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
yy Connecting through the HDMI cable may not be supported depending on the PC.
yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does
not work.
yy For Set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1 (STB) port.
HDMI connection
Blu-ray player / DVD /
Set-top box
Input Cables (Sold Separately)
• Theslotsandopeningsinthecabinetandinthebackorbottomareprovidedfornecessaryventilation.Toensurereliableoperationofthisapparatus,
andtoprotectitfromoverheating,theseslotsandopeningsmustneverbeblockedorcovered.
-Donotcovertheslotsandopeningswithaclothorothermaterials.
-Donotblocktheslotsandopeningsbyplacingthisapparatusonabed,sofa,rugorothersimilarsurface.
-Donotplacethisapparatusinaconfinedspace,suchasabookcaseorbuilt-incabinet,unlessproperventilationisprovided.
• Donotplacethisapparatusnearoroveraradiatororheatregister,orwhereitisexposedtodirectsunlight.
• Donotplaceavesselcontainingwater(vasesetc.)onthisapparatus,asthiscanresultinariskoffireorelectricshock.
• Donotexposethisapparatustorainorplaceitnearwater(nearabathtub,washbowl,kitchensink,orlaundrytub,inawetbasement,orneara
swimmingpooletc.).Ifthisappratusaccidentallygetswet,unplugitandcontactanauthorizeddealerimmediately.
• Makesuretopulloutthepowercordfromtheoutletbeforecleaning.
• Thisapparatususebatteries.Inyourcommunity,theremightberegulationsthatrequireyoutodisposeofthesebatteriesproperlytoprotectthe
environment.Pleasecontactyourlocalauthoritiesfordisposalorrecyclinginformation.
• Donotoverloadwalloutlets,extensioncords,oradaptorsbeyondtheircapacity,sincethiscanresultinfireorelectricshock.
• Power-supplycordsshouldberoutedsothattheyarenotlikelytobewalkedonorpinchedbyitemsplaceduponoragainstthem.Payparticular
attentiontocordsattheplugend,whereconnectedtoadaptors,andatthepointwheretheyexitfromtheapparatus.
• Toprotectthisapparatusfromalightningstorm,orwhenitisleftunattendedandunusedforlongperiodsoftime,unplugitfromthewalloutletand
disconnecttheantennaorcablesystem.Thiswillpreventdamagetothesetduetolightningandpowerlinesurges.
• BeforeconnectingtheACpowercordtotheDCadaptoroutlet,makesurethevoltagedesignationoftheDCadaptorcorrespondstothelocal
electricalsupply.(dependingonthemodel)
• Neverinsertanythingmetallicintotheopenpartsofthisapparatus.Doingsomaycreateadangerofelectricshock.
• Toavoidelectricshock,nevertouchtheinsideofthisapparatus.Onlyaqualifiedtechnicianshouldopenthisapparatus.
• Makesuretoplugthepowercordinuntilitisfirmlyinserted.Pullontheplug,notthecord,whenremovingthepowercordfromtheoutlet.Donot
touchthepowercordwithwethands.
• Ifthisappratusdoesnotoperatenormally-inparticular,ifthereareanyunusualsoundsorsmellscomingfromit-unplugitimmediatelyandcontact
anauthorizeddealerorservicecenter.
• BesuretopullthepowerplugoutoftheoutletiftheTVistoremainunusedorifyouaretoleavethehouseforanextendedperiodoftime(especially
whenchildren,elderlyordisabledpeoplewillbeleftaloneinthehouse).
-Accumulateddustcancauseanelectricshock,anelectricleakage,orafirebycausingthepowercordtogeneratesparksandheat,orcausethe
insulationtodeteriorate.
• Besuretocontactanauthorizedservicecenter,wheninstallingyoursetinalocationwithheavydust,highorlowtemperatures,highhumidity,
chemicalsubstancesorwhereitwilloperatefor24hoursadaysuchasinanairport,atrainstation,etc.Failuretodosomaycauseseriousdamage
toyourset.
• Useonlyaproperlygroundedplugandreceptacle.
-Animpropergroundmaycauseelectricshockorequipmentdamage.(ClasslEquipmentonly.)
• Toturnofftheapparatuscompletely,youmustpullthepowerplugoutofthewallsocket.Consequently,thepowerplugshouldbereadilyaccessible
atalltimes.
• Donotallowchildrentohangontotheproduct.
• Storetheaccessories(batteries,etc.)inalocationsafelyoutofthereachofchildren.
• Donotinstalltheproductinanunstablelocationsuchasashakyself,aslantedfloor,oralocationexposedtovibration.
• Donotdroporimpartashocktotheproduct.Iftheproductisdamaged,disconnectthepowercordandcontactaservicecenter.
• Tocleantheproduct,unplugthepowercordfromthepoweroutletandwipetheproductusingasoft,drycloth.Donotuseanychemicalssuch
aswax,benzene,alcohol,thinners,insecticide,airfreshener,lubricantordetergent.Thismaydamagetheappearanceorerasetheprintingonthe
product.
• Donotexposetheapparatustodrippingorsplashing.
• Donotdisposeofbatteriesinafire.
• Donotshortcircuit,disassemble,oroverheatthebatteries.
• notshortcircuit,disassemble,oroverheatthebatteries.
• Thereisadangerofexplosionifyoureplacethebatterieswiththewrongtypeofbattery.Replaceonlywiththesameorequivalenttype.
• WARNING-TOPREVENTTHESPREADOFFIRE,KEEPCANDLESOROTHEROPENFLAMESAWAYFROMTHISPRODUCTATALLTIMES.
yy HDMI-DVI
yy Coaxial (RF)
yy HDMI
TV Controller (Panel Key)
USB
Selecting the Media Play
yy The rear panel may differ
depending on the model.
MEDIA.P
m
Selecting the Menu
R
s
P
TV Rear Panel
Selecting a Source
Power off
Return
Function menu
Remote control sensor
TV Controller
The image is drawn by facing
the front side of the TV.
Power Input
✎✎ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot
operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
VHF/UHF Antenna
✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
or
Cable
Component connection
AV connection
Blu-ray player / DVD
VCR
- English -
-1Changing
the Input Source
BN68-06636A
-2-
-3-
How to use Edit Name
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
Edit Name lets you associate a device name to an input source. To
access Edit Name, enter Support menu and select Edit Name. Name
the device connected to the input jacks to make your input source
selection easier.
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you
should set the TV to PC mode under Edit Name.
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI
cable, you should set the TV to DVI PC mode under Edit Name.
■■ TV / AV / Component / HDMI1
✎✎ You can only choose external devices that are connected to the TV. In the ✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity (H / V)
1366 x 768
1920 x 1080
IBM
720 x 400
31.469
70.087
28.322
-/+
c
c
640 x 480
35.000
66.667
30.240
-/-
c
c
832 x 624
49.726
74.551
57.284
-/-
c
c
1152 x 870
68.681
75.062
100.000
-/-
640 x 480
31.469
59.940
25.175
-/-
c
c
640 x 480
37.861
72.809
31.500
-/-
c
c
640 x 480
37.500
75.000
31.500
-/-
c
c
800 x 600
37.879
60.317
40.000
+/+
c
c
800 x 600
48.077
72.188
50.000
+/+
c
c
800 x 600
46.875
75.000
49.500
+/+
c
c
1024 x 768
48.363
60.004
65.000
-/-
c
c
1024 x 768
56.476
70.069
75.000
-/-
c
c
1024 x 768
60.023
75.029
78.750
+/+
c
c
1152 x 864
67.500
75.000
108.000
+/+
1280 x 720
45.000
60.000
74.250
+/+
MAC
Information
Press INFO(I), you can see detailed information about the selected
external device.
✎✎ Information only available for the current connected source.
VESA
DMT
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Displays and selects the available video
sources.
Turns the TV on and off.
Press to directly access to channels.
Returns to the previous menu.
Operations
not available.
✎✎ When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
Area
✎✎ Settings can be adjusted and stored for each external device connected
You can change the desired area.
to the TV.
✎✎ Lowering picture brightness reduces power consumption.
Auto Store
(Depending on the country)
Scans for a channel automatically and stores in the TV.
83.500
-/+
c
Manual Store
+/+
c
Scans for a channel manually and stores in the TV.
1280 x 1024
79.976
75.025
135.000
+/+
c
1366 x 768
47.712
59.790
85.500
+/+
1440 x 900
55.935
59.887
106.500
-/+
c
1600 x 900RB
60.000
60.000
108.000
+/+
c
Channel List Option Menu
1680 x 1050
65.290
59.954
146.250
-/+
c
1920 x 1080
67.500
60.000
148.500
+/+
c
Set each channel using the Channel List menu options (Add / Delete).
Option menu items may differ depending on the channel status.
Set each channel using the Channel List menu options. Option menu
items may differ depending on the channel status.
c
✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is
❑❑ Retuning Channels
108.000
c
Your television has several setting options for picture quality control.
A channel deleted.
60.020
✎✎ According to channel source, Manual Store may be supported.
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If
there is abnormal sound or no sound, reselect the sound standard required.
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
✎✎ Fine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner.
✎✎ This is available for analogue broadcasts only.
■■ Film Mode : (Auto / Off) Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for
optimum quality.
/ 1080i).
■■ Motion Lighting: Reduce power consumption by brightness control
adapted motion.
✎✎ Only available in Standard mode.
Picture Reset
Resets your current picture mode to its default settings.
■■ Reset Picture Mode : Returns all picture values in the currently.
Sound Menu
Sound Mode t
■■ Music: Emphasizes music over voices.
■■ Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most
of the time.
16:9: Sets the picture to 16:9 wide mode.
4:3: Sets the picture to basic (4:3) mode.
Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
size.
DTS TruSurround t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i Auto Volume
■■ Colour Tone: Select the colour temperature
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
Equalizer
(standard sound mode only)
■■ Balance: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■ Reset: Resets the Equalizer to its default settings.
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to
External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers
are turned off. You will hear sound through the external speakers only.
When you set Speaker Select to TV Speaker, both the TV’s speakers
and the external speakers are on. You will hear sound through both.
✎✎ When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
✎✎ If there is no video signal, both speakers will be mute.
Sound Reset
■■ Reset All: Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I - Dual II, the current sound mode is displayed
on the screen.
A2 Stereo
Screen Fit: Displays the full image without any cut-off when
HDMI(720p/1080i/1080p) signals are inputted.
✎✎ NOTE
xxDepending on the input source, the picture size options may vary.
xxThe available items may differ depending on the selected mode.
xxSettings can be adjusted and stored for each external device connected
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is
weak or distorted, fine tune the channel manually.
✎✎ Available only in HDMI mode (RGB signals).
■■ Standard: Selects the normal sound mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A “ ” beside the channel indicates the channel has been deleted.
✎✎ The Add menu only appears for deleted channels.
Fine Tune
■■ HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
Picture Options
✎✎ Warm will be deactivated when the picture mode is Dynamic.
■■ Add / Delete: Delete or add a channel to display the channels you want.
Displays the main on-screen menu.
Selects the on-screen menu items and changes the
values seen on the menu.
Icons
59.810
Changes channels.
Displays information on the TV screen.
c
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Channel Status Display icons
63.981
Adjusts the volume.
Quickly select frequently used functions.
c
✎✎ Using the remote control buttons with the Channel List.
49.702
Cuts off the sound temporarily.
Selects the HDMI mode directly.
c
■■ Dynamic: Suitable for a bright room.
Select a channel in the All Channels, Added Channels screen by pressing
the ▲/▼ buttons, and pressing the ENTERE button. Then you can
■■ Standard: Suitable for a normal environment.
watch the selected channel.
■■ Movie: Suitable for watching movies in a dark room.
1280 x 800
Returns to the previous channel.
Displays the channel list on the screen.
Views the Media Play.
c
Select your preferred picture type.
Channel List
1280 x 1024
Installing batteries (Battery size: AAA)
Alternately select Teletext ON, Double, Mix or OFF.
Picture Mode t
❑❑ Seeing Channels
Optimal resolution
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
-4-
Picture Menu
Channel Menu
Display Modes (HDMI/DVI Input)
to DVI cable, you should set the TV to DVI mode under Edit Name.
Source List, connected inputs will be highlighted.
to an input on the TV.
■■ Digital Clean View: (Auto / Off / Low / Medium / High) If the broadcast
signal received by your TV is weak, you can activate the Digital Clean
View feature to reduce any static and ghosting that may appear on the
screen.
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
Default
Automatic
change
Dual I
Automatic
change
Dual I
✎✎ If the stereo signal is weak and an automatic switching, occurs, then
switch to the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
✎✎ When the signal is weak, try other options until the best picture is
displayed.
Exit the menu.
Use these buttons according to the direction on
screen.
P.MODE: Selects the Picture Mode.
P.SIZE: Change the picture size.
SRS: Turns the DTS TruSurround on or off.
Use these buttons in a specific feature.
-5[UFH4003-AR]BN68-06636A-02ENG.indb 1
yy Cable Holder(1EA)
yy Composite (AV)
yy Component
BN68-06636A-02
yy For better picture and audio quality, connect to a digital device using an HDMI
cable.
yy The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV.
If such a problem occurs, ask the manufacturer of the external device about the
HDMI version and, if out of date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
Audio connection
(Analog)
Web Site
NEW ZEALAND
0094117540540
0094115900000
yy Warranty Card / Safety Guide (Not available in some locations)
yy Power Cord
(Please read the safety instructions below before installing and using the product.)
CAUTION
Still image warning
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
Warning! Important Safety Instructions
user manual
Figures and illustrations in this User Manual are provided for reference only and may
differ from actual product appearance. Product design and specifications may be
changed without notice.
Connections
-6-
-7-
-82014-08-28 오후 5:26:50
POWER
P
Setup Menu
Support Menu
Language
❑❑ Using the Media Play
Set the menu language.
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
✎✎ Press ◄ or ► button to select menu language. (According to the
different areas, some countries have only one language.)
connecting or using a USB device, the device may not be recognized
or may malfunction.
released automatically when your connect them to the TV.
MEDIA.P
Connecting a USB Device
■■ Clock Set: Set the Year, Month, Day, Hour, Minute.
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files
to the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play.
■■ On Timer/Off Timer
✎✎ Current time should be set first by Clock Set.
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
Hour/Minute: Enter the hour and minute for the TV to turn on or
off.
Contents: Select TV.
Channel: Select the channel to be played when the TV turns on
automatically.
Volume: Select the volume level when TV turns on automatically.
✎✎ The maximum displayed number of partition is 4.
Using the Media Play Menu
■■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (Off, 30
min, 60 min, 90 min, 120 min, 150 min and 180 min)
✎✎ To cancel Sleep Timer, select Off.
Melody
1. Press the MENU button. Press the ▲ or ▼ button to select
Support, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press
the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos), then press the ENTERE button.
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file being played, press
TOOLS button in the file list, and then select Information.
✎✎ Need-to-Know List before using Media Play (USB)
• Supported file systems are FAT and NTFS.
• Certain types of USB Digital camera and audio devices may not
Set so that a melody plays when the TV is turned Off, Low, Medium
and High.
be compatible with this TV.
• Media Play only supports USB Mass Storage Class (MSC)
✎✎ The Melody does not play.
--When no sound is output from the TV because the volume has been
reduced to minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
Auto Power Off
The TV will be automatically turned off when no user operation is
received for 4 hours.
✎✎ If the Auto Power Off option is set to Off, the TV will stay on even if no
operations are performed on the TV.
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s
USB port. (LED 4000, 4003, 5000 series : USB HDD is not
supported.) Does not support smart devices connected in MTP
or PTP protocol.
• Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG
is not responsible for any data file damage or data loss.
• A USB device that requires high power may not be supported.
(LED 4000, 4003, 5000 series : 0.5A) (LED 4100, 5100 series
and above: 1A)
• Do not disconnect the USB device while it is loading.
• The higher the resolution of the image, the longer it takes to
display on the screen.
• The maximum supported JPEG resolution is 15360 x 8640
pixels.
• If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
• If a USB extension cable is used, the USB device may not be
recognized or the files on the device may not be read.
• The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
Troubleshooting
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
• If a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
• Photos only supports sequential jpeg format.
• The scene search and thumbnail functions are not supported in the
Videos.
• If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
• The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
• The media may not be playing smoothly when using the device
higher than USB 2.0.
• The file name only works in supported menu language. The other
language is not displayed properly.
■■ Videos
1. Press the ◄ or ► button to select Videos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list.
(Play) button.
3. Press the ENTERE button or
--The selected file is displayed on the top with its playing time.
--If video time information is unknown, playing time and the progress bar are
not displayed.
--During video playback, you can search using the ◄ and ► button.
--You can use ( ) (REW) and ( ) (FF) buttons during playback.
✎✎ In this mode, you can play movie clips contained in a game, but you cannot
play the game itself.
yy Supported Subtitle Formats
--External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
Container
AVI
MKV
MKV
MKV
MP4
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
yy Adjust the Cable/Set top box video output resolution to 1080i or 720p.
yy Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
yy Low signal level or bad quality can cause picture distortion. This is not a TV issue.
yy Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
yy If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
yy Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
yy Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
yy If the picture size is set to Screen Fit, change it to 16:9.
yy Change cable/satellite box resolution.
The picture is black and white.
yy If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
MP4
*.avi*.mkv
AVIMKV
*.asf*.wmv
ASF
*.ts*.trp*.tp
TS
*.dat*.mpg*.
mpeg*.vob
PS
*.3gp
3GPP
*.flv
flash formats
Resolution
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
VC-1
Bit rate(Mbps)
1920x1080
6~30
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
MPEG2-TS
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG1
1920x1080
6~30
20Mbps
MPEG2
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
Sorenson H.263
1920x1080
6~30
20Mbps
Audio Codec
MP3 / ADPCM /
AAC
MP3 / AC3 /
LPCM / ADPCM
/ DTS
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
AC3 / AAC /
MP3 / DD+
AC3 / MPEG /
LPCM / AAC
MP3
MP3
Other Restrictions
yy Video content will not play, or not play correctly, if there is an error in the
content or the container.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yy Video content can not be played, if there are many contents in one file.
Video Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
The TV is not receiving all channels.
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Make sure the Antenna cable is connected securely.
yy Please try Setup (Plug & Play) to add available channels to the channel list. Go to MENU - System - Setup (Plug & Play) and
wait for all available channels to be stored.
yy Verify the Antenna is positioned correctly.
PC Connection
A “Mode Not Supported” message
appears.
yy Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
yy If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture will not display in full screen.
yy HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
yy Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
yy Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
yy Replace the remote control batteries with the poles (+/–) in the right direction.
yy Clean the transmission window located on the top of the remote control.
yy Try pointing the remote directly at the TV from 5~6 feet away.
There is a plastic smell from the TV.
yy This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
yy Remove the stand base from the TV and reassemble it.
The picture is good but there is no sound.
yy Set the Speaker Select option to TV Speaker in the sound menu.
yy If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
yy If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
yy If you are using a HDMI cable, a separate audio cable is required.
yy If your TV has a headphone jack, make sure there is nothing plugged into it.
There are difficulties assembling the stand
base.
yy Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
(unavailable).
yy The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or
every time the TV is turned off.
yy If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
from Store Demo mode to Home Use.
You have intermittent loss of audio or video.
yy Check the cable connections and reconnect them.
yy Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
yy This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
yy Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
yy To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
yy Ensure the Sleep Timer is set to Off in the Time menu.
yy If your PC is connected to the TV, check your PC power settings.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
yy When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
yy Check cable connections (remove and reconnect all cables connected to the TV and external devices).
yy Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using (
or (
Title
You can move the other file directly.
Repeat Mode
Picture Size
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
) (REW)
Music
Photos
c
You can play movie and music files
repeatedly.
You can adjust the picture size to your
preference.
Picture Mode
c
c
c
c
c
You can play the video with Subtitles. This
function only works if the subtitles are the
same file name as the video.
You can change the audio language if the
Audio Language
video has more than one language.
c
c
c
You can select the slide show speed during
the slide show.
You can set and select background music
when watching a Slide Show.
You can zoom into images in full screen
mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the
played file.
Background
Music
c
c
c
c
c
❑❑ DivX® Video On Demand
xxYou can move to other file using ◄ or ► button.
✎✎ Press TOOLS button and select Background Music. Music files can be
automatically played during the Slide Show if the Background Music is set
to On.
Shows the registration code authorized for the TV. If you connect to
the DivX web site and register with 10-digit registration code, you can
download the VOD activation file. Once you play it using Media Play, the
registration is completed.
finished loading.
✎✎ For more information on DivX® VOD, visit http://vod.divx.com.
✎✎ The Mode in Background Music cannot be changed until the BGM has
❑❑ Software Upgrade
yy Supported Photo Formats
Image
Photo
Base-line
Progressive
JPEG
Software Upgrade can be performed by downloading the latest firmware
from “www.samsung.com” to a USB memory device.
Resolution
15360 x 8704
1024 x 768
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you select to install the TV on your own.
✎✎ NOTE
• Standard dimensions for wall mount kits are shown in the table
on the screen. These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
✎✎ You may need additional material such as an anchor depending on the
type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
below.
purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎✎ Note
xxInstall the TV near to the wall so that it does not fall backwards.
xxIt is safe to connect the string so that the clamps fixed on the wall are
equal to or lower than the clamps fixed on the TV.
• When purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard
screw specifications.
• Do not use screws longer than the standard dimension, as they
may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV on a wall.
Product
Family
Models
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
❑❑ Contact Samsung
LED-TV
UA32FH4003
UA32FH4005
200 X 200
M6
4
You can read a guide to connect external devices for HD sources.
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
■■ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ Screws may not be supplied with the product. In this case, please
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
❑❑ HD Connection Guide
xxUntie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is beside
the “K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
TV model.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
- 11 -
- 12 Specifications
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
UA32FH4003
UA32FH4005
Model Name
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Installation with a stand.
10 cm
1366 X 768
Screen Size
81 cm
Sound
Output
5W X 2
73.8 X 44.1 X 9.3 cm
73.8 X 49.7 X 19.1 cm
Weight
Without Stand
With Stand
Installation with a wall-mount.
10 cm
10 cm
Display Resolution
Dimensions (W x H x D)
Body
With Stand
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xxIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
10 cm
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels
purchase these additionally.
Installing the Wall Mount
✎✎ The wall mount kit is not supplied, but sold separately.
c
Stop Slide Show
/ Start Slide
You can start or stop a Slide Show.
Show
Slide Show
Speed
✎✎ Since the necessary clamps, screws, and string are not supplied, please
Wall Mount Kit Specifications (VESA)
c
Subtitle Setting
Zoom
) (FF) button.
Videos
yy Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
yy A low signal can cause picture distortion. This is not a TV issue.
yy Please check the volume of external device connected to your TV.
The TV turns off automatically.
remote control to start the slide show.
Operation
Storage and Maintenance
Possible Solution
There is no sound or the sound is too low at
maximum volume.
yy Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
yy Make sure the wall outlet is working.
yy Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
(Play) / ENTERE button on the
Category
To prevent the TV from falling
Other Information
■■ Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
yy Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
The TV will not turn on.
✎✎ NOTE
xxWhile a photo list is displayed, press the
■■ Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select Deselect All.
A “Mode Not Supported” message
appears.
No Picture, No Video
■■ Photos
1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
(Play) button.
3. Press the ENTERE button or
CMYK, YCCK Colour space JPEG are not supported.
yy If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
yy Set the output resolution of the cable box to 1080i or 720p.
yy Check the cable connections. Make sure a video cable is not connected to an audio input.
yy For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may
cause a sound problem.)
Other Restrictions
yy Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
The speakers are making an inappropriate
noise.
displayed, even if they are saved on the same USB device.
✎✎ If the need to change Equalizer - when playing MP3, then exit Media Play,
Audio Decoder
The cable/set top box remote control does
not turn the TV on or off, or adjust the
volume.
Sound Quality
✎✎ During music playback, you can search using the ◄ and ► button.
✎✎ (REW) and (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 file extension. Other file extensions are not
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
RF(Cable/Antenna) Connection
Possible Solution
yy If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
yy Antenna connection: Try HD stations after performing Auto tuning.
*.mp4
Video Codec
DivX 3.11/4.12/5.x/6.0
■■ Music
1. Press the ◄ or ► button to select Music, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
(Play) button.
3. Press the ENTERE button or
- 10 -
Picture Quality
The TV image does not look as good as it
did in the store.
Container
Frame
rate(fps)
--Internal
Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
File
Extension
• If a USB device connected to the TV is not recognized, the list of
-9-
Problem
yy Supported Video Formats
• The power-saving mode of some external hard disk drives may be
Time
✎✎ The current time will appear every time you press the INFO button.
• PTP device is not supported.
• If an over-power warning message is displayed while you are
10 cm
10 cm
5.4 kg
6.0 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
✎✎ The option may differ depending on country.
10 cm
Licences
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source Licence Notice is written only English.
Recommendation - Jordan Only
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
- 13 [UFH4003-AR]BN68-06636A-02ENG.indb 2
- 14-
- 15 -
- 16 2014-08-28 오후 5:26:55