SCH-F519
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or
illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Important safety precautions
Be aware of special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use of any unauthorised accessories could damage
you and your phone and may be dangerous.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening
to a headset can damage your hearing.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 97.
1
About this Guide
• Camera and camcorder
Use the camera module on your
phone to take a photo or record
a video.
This User’s Guide provides you with condensed
information about how to use your phone. To
quickly learn the basics for your phone, please refer
to “Get started” and “Step outside the phone.”
Special features of your phone
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
] Indicates a key on the phone. For example, [
< > Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
2
• MP3 player
Play music files using your phone
as an MP3 player.
• Melody composer
Make your own melodies for your
phone.
]
• Memory disk
Connect your phone to a
computer to copy files directly to
and from it.
• Bluetooth
Connect to a headset or handsfree car kit using wireless
Bluetooth technology.
• Calendar
Keep track of your daily, weekly,
and monthly schedule.
• Get personal with photo
caller ID
See who’s calling you with their
very own photo displays.
• Alarm
Use your phone as an alarm
clock to wake you up in the
morning or notify you of an
impending event.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others,
use this convenient name card.
Special features of your phone
• File viewer
Open documents in various
formats on the phone without
corruption.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
7
First steps to operating your phone
Install and charge the phone ........................... 7
Power on or off.............................................. 9
Keys and display........................................... 10
Access menu functions .................................. 13
Customise your phone ................................... 14
Make/Answer calls ........................................ 16
Step outside the phone
17
Begin with your camera, the MP3 player, and other
special features
Use the camera ............................................ 17
Play music ................................................... 18
4
Use melody composer ...................................
Use Contacts ...............................................
Send/View messages ...................................
Send SOS messages .....................................
Use Bluetooth ..............................................
Use My Menu ...............................................
19
20
22
23
24
25
Enter text
26
Arabic,T9 arabic, English Word, ABC, 123,and Symbol
mode
Call functions
29
Advanced calling features
Menu functions
33
All menu options listed
Solve problems
94
Help and personal needs
Health and safety information
97
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Calls
p.33
3 Multimedia
p.43
5 Message
p.60
8 Utilities
p.74
1
2
3
4
5
6
7
8
p.33
p.33
p.34
p.34
p.34
p.34
p.35
p.35
1
2
3
4
p.43
p.48
p.53
p.57
1
2
3
4
5
6
7
8
p.60
p.61
p.62
p.63
p.63
p.64
p.64
p.65
1
2
3
4
5
6
7
8
9
0
*
p.74
p.75
p.78
p.79
p.80
p.83
p.86
p.86
p.87
p.88
p.89
Missed
Incoming
Outgoing
Rejected
Air time
Area code
Call reject
Call settings
2 Contacts
p.38
1
2
3
4
5
6
7
p.38
p.39
p.40
p.41
p.42
p.42
p.42
Find
Add
Group settings
Speed dial
Name card
My phone #
Memory info
Take photo
My album
Photo studio
Settings
4 Display
p.57
1
2
3
4
5
6
7
8
p.57
p.57
p.58
p.58
p.58
p.58
p.59
p.59
Screen saver
Functional screen
Menu type
Power on/off
Dialing font
Time setting
Backlight
Lighting
New message
Inbox
Outbox
Draft
Settings
SOS message
Msg wallpaper
Memory info
6 Sounds
p.65
1
2
3
4
5
p.65
p.65
p.66
p.66
p.67
Ringer
Ringer vol./type
Key tone
Function alert
Hour alert
7 Entertainment
p.67
1 Games
2 MP3
3 Melody composer
p.67
p.68
p.71
Today
Calendar
Task list
Alarm
User memory
Voice tools
Memo pad
Calculator
Countdown
Clock
Bluetooth
9 Settings
p.91
1
2
3
4
p.91
p.94
p.94
p.94
Security
Input method
Language/
Domains preset
5
Unpack
Make sure you have each item
•
•
•
•
Phone
Travel Adapter
Battery
User’s Guide
• The items supplied with your
phone and accessories
available at your Samsung
dealer may vary, depending
on your country or service
provider.
• Use the purchased accessories
with only Samsung-authorised
devices. The use of these
accessories with other devices
could cause problems and any
repair costs would not be
covered by the warranty.
6
Your phone
Keys, features, and locations
Flash
Earpiece
Camera lens
Display
Confirm key
Left soft key
Volume keys
MP3 backward
key
Dial key
MP3 player key
Alphanumeric
keys
Special
function keys
MP3 play/
pause key
Right soft key
MP3 forward
key
Delete/
Cancel key
Navigation
keys (Up/
Down/Left/
Right)
Microphone
Power on/
off/Menu
exit/End key
Camera/
Voice memo
key
Headset/
Adapter jack
Speaker
Get started
Insert the UIM card.
First steps to operating your phone
UIM card information
When you subscribe to a cellular network, you
receive a plug-in UIM (User Identification
Module) card loaded with your subscription
details, such as your PIN, and available optional
services.
Make sure that the
gold-coloured
contacts on the card
are face down.
Install the battery.
Install and charge the phone
Remove the battery
cover.
If the phone is
already on, first turn
it off by pressing and
holding [ ].
Reattach the
battery cover.
7
Get started
Plug the travel
charger into the
phone.
Plug the adapter into a standard AC wall
outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the
charger from the power outlet.
8
Remove the adapter
from the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
1. Open the phone.
Do not turn on
the phone when
mobile phone use
is prohibited.
2. Press and hold [ ] to
turn on the phone.
Switch off
1. Open the phone.
3. If necessary, enter the
PIN and press <OK>.
2. Press and hold [ ].
Keypad lock
When you close the phone, the keypad lock
feature locks the exposed keys to avoid
accidental key presses.
2. Press [Up] to unlock the keys or [Down] to
keep the keys locked.
Get started
Switch on
1. Press and hold [ ].
Airplane mode
You can switch the phone to Airplane mode, in
which the phone functions requiring network
connection are deactivated. This mode is helpful
when you want to use your phone in a place
where you are not allowed to use mobile
devices, such as in an airplane and at a
hospital.
To switch to Airplane mode, press <Menu> and
select Calls → Call settings → Airplane mode
→ On.
In Airplane mode, you can use non-wireless
functions, such as games, camera, and MP3
player.
9
Get started
Keys and display
Keys
Perform the functions indicated on
the bottom line of the display.
Return to the previous file during
music playback.
In Idle mode, access the following
menus directly:
• Up: My Menu p. 25
• Down: Game
• Left: Message
• Right: Calendar
In Menu mode, scroll through menu
options.
Skip to the next file during music
playback.
In Menu mode, select the
highlighted menu option or confirm
input.
10
In the MP3 player, play or pause
music.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the display.
In Menu mode, return to the
previous menu level.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode.
End a call.
Press and hold to switch the phone
on or off.
In Menu mode, cancel input and
return the phone to Idle mode.
In Idle mode, enter the Multimedia
menu. Press and hold to turn on the
camera.
In Camera mode, take a photo or
record a video.
During a call, press and hold to
record your call conversation.
Get started
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [0] to
enter an international call prefix.
Adjust the volume.
In Idle mode, with the phone open,
adjust the key tone volume. With
the phone closed, press and hold
[ ] to turn on the flashlight, if
activated.
In Menu mode, scroll through menu
options.
In Idle mode, enter the MP3 menu.
Press and hold to launch the MP3
player.
11
Get started
Display
Layout
The display has three areas.
Icons
display various icon.
Menu
Icons
Find
Restriction onp. 92
SOS message feature active
Text and graphics
display messages,
instructions, and
information you enter.
p. 64
Soft key function
indicators
show the current
functions assigned to
the soft keys.
New message
Received signal strength
Roaming
Call in progress
12
Out of your service area or
Airplane mode; you cannot
make or receive calls
Lock modep. 91
Bluetooth activep. 89
New voicemail
Urgent message
Alarm setp. 79
•
•
•
•
•
•
•
:
:
:
:
:
:
:
Ringer only
Silent
1 Beep
Vibration
Vib. & ringer
Vib. then ringer
Ringer then vib.
Access menu functions
Use the
soft keys
Get started
Ringer type settingp. 65
The roles of the soft keys vary
depending on the function you
have selected. The bottom line of
the display indicates their current
role.
Menu
Find
Silent modep. 15
Answering machine feature
activep. 84
Battery power level
Press the left
soft key to
access Menu
mode.
Press the right
soft key to
access Find in
the Contacts
menu.
13
Get started
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select>, <Ok>, or
<Save> to confirm the
function displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press [ ] to move up one
level.
• Press [ ] to return to Idle
mode.
Use
shortcuts
Press the number key
corresponding to the option you
want.
Use My
Menu
You can set up a menu of your
own using your favourite menu
items, which can then be
accessed by specific number
keys.p. 25
Customise your phone
Display
language
1. In Idle mode, press
<Menu> and select
Settings → Language/
.
2. Select a language.
14
1. In Idle mode, press
<Menu> and select
Sounds → Ringer.
Idle mode
wallpaper
You can set wallpaper for the
idle screen using various
pictures.
2. Press [Down] and press
[Left] or [Right] to select a
ringtone category.
1. In Idle mode, press
<Menu> and select
Display → Screen saver.
3. Press [Up] or [Down] to
scroll to a ringtone.
2. Select an image category.
4. Press <Play> to listen to
the selected ringtone.
5. When you find the melody
you want, press <Save>.
Get started
Call ringer
melody
3. Select an image.
Silent mode
You can switch the phone to
Silent mode to avoid disturbing
other people.
Press and hold [ ] in Idle
mode.
15
Get started
Phone lock
You can protect the phone
against unauthorised use with
a phone password.
Make/Answer calls
Make a call
1. In Idle mode, press
<Menu> and select
Settings → Security.
2. Enter the default password,
0000, and press <Ok>.
3. Select Change password.
2. Press [
6. Select Lock mode.
7. Select Once or On.
16
].
3. To end the call, press [ ].
Answer
a call
4. Enter a new 4-digit
password and press <Ok>.
5. Enter the new password
again and press <Ok>.
1. Enter an area code and
phone number.
Adjust the
volume
during a call
1. When the phone rings,
press [ ].
2. To end the call, press [ ].
Press [ / ].
Step outside the phone
5. Press <Capture> or
[
] to take a photo.
Begin with your camera, the MP3 player, and other
special features
6. Press <Save>.
The phone returns to
Capture mode
automatically.
Use the camera
Take a photo
1. Open the phone.
2. In Idle mode, press and
hold [
] to turn on the
camera.
View a photo
]
2. Select a photo.
3. Press [2] and then [1], to
select a camera mode.
4. Aim the lens at the subject
and make any desired
adjustments.
1. In Idle mode, press [
and select My album →
Gallery.
Record a
video
1. In Idle mode, press and
hold [
] to turn on the
camera.
2. Press [2] and then [1], to
select the
icon.
17
Step outside the phone
Record a
video
(continued)
3. Press < > or [
start recording.
] to
4. Press < > or [
stop recording.
] to
Play music
Copy MP3
files to the
phone
5. Press <Save>.
The phone returns to
Camcorder mode
automatically.
Play a video
1. In Idle mode, press [
and select My album →
Gallery.
2. Select a video clip (
3. Press <Play>.
18
Create the
play list
).
]
You can copy MP3 files directly
from a computer.p. 66
1. In Idle mode, press [MP3]
and MP3 files.
2. Press <Options> and
select Add to play list.
3. Press <Check> to select
the files you want.
4. Press <Add>.
5. Press <Play> to begin
playback.
1. In Idle mode, press and
hold [MP3].
2. Press [
• <List>: opens the play
list.
• [ / ]: adjusts the
volume.
• <A-B>: sets a section in
a file to play the section
repeatedly.
].
3. During playback, use the
following keys:
• [
]: pauses or resumes
playback.
• [
]: moves to the
previous file or the
beginning of the file.
Moves backward in a file
when held down.
• [
]: skips to the next
file. Moves forward in a
file when held down.
• <Options>: opens the
option list.
Step outside the phone
Play MP3
music
Use melody composer
Create a
melody
1. In Idle mode, press
<Menu> and select
Entertainment → Melody
composer → Compose
melody.
2. Move the selection point up
or down.
19
Step outside the phone
Create a
melody
(continued)
3. Press <Input>.
4. Select a note or rest.
5. Repeat steps 2 to 4 to add
more notes and rests.
6. Press <Save>.
7. Enter a melody name and
press <Save>.
Play a
melody
1. In Idle mode, press
<Menu> and select
Entertainment → Melody
composer → My
melodies.
2. Scroll to the melody you
want and press <Play>.
20
Use Contacts
Add a
contact
To the phone’s memory:
1. In Idle mode, enter a
phone number and press
<Save>.
2. Select New entry.
3. Press <Edit>.
4. Enter a name and press
<Select>.
5. Press [Left] or [Right] to
select the phone memory.
6. Select a number type.
7. Specify contact
information: Mobile, Home,
Office, Pager, Fax, Image,
E-mail1, E-mail2, URL,
Group, Ringer, and Etc.
Find a
contact
(continued)
1. In Idle mode, enter a phone
number and press <Save>.
2. Select New entry.
3. Press <Edit>.
4. Enter a name and press
<Select>.
5. Press <Save> to save the
contact.
Find a
contact
1. In Idle mode, press
<Find>.
Create a
name card
4. Scroll to a number and
press [ ] to dial, or press
<Edit> to edit contact
information.
Step outside the phone
8. Press <Save> to save the
contact.
To the UIM card:
1. In Idle mode, press
<Menu> and select
Contacts → Name card →
My Name Card.vcf.
2. Press <Options> and
select Edit.
3. Specify your contact
information.
4. Press <Save> to save the
name card.
2. Enter the first few letters of
the name you want.
3. Select a contact.
21
Step outside the phone
Send/View messages
Send a text
message
1. In Idle mode, press
<Menu> and select
Message → New
message.
2. Enter the message text and
press <Next>.
3. Press <Next>.
4. Enter destination numbers.
5. Press <Send> to send the
message.
22
View a text
message
When a notification appears:
Press <Select>. The
message displays.
From the Inbox:
1. In Idle mode, press
<Menu> and select
Message → Inbox → a
memory location.
2. Select a message.
When a notification appears:
1. Press [ ]. The phone dials
the voicemail center.
2. Follow the instructions from
the system.
From the Inbox:
1. In Idle mode, press
<Menu> and select
Message → Inbox → Voice
mail.
2. Follow the instructions from
the system.
Send SOS messages
Set up the
SOS
message
options
Step outside the phone
Access
voicemails
1. In Idle mode, press
<Menu> and select
Message → SOS
message.
2. Press [Left] or [Right] to
select On to activate the
SOS message feature.
3. Move to the Recipients line
and press <Add>.
4. Enter the phone numbers to
which you want to send
SOS messages and press
<Save>.
23
Step outside the phone
5. Move to the Number of
sending line.
6. Select the number of times
the phone will repeat
sending SOS messages.
7. When you have finished,
press <Save>.
Send an SOS
message
24
In Idle mode, with the phone
closed, press [ / ] 4 times.
The phone sends the message.
Use Bluetooth
Your phone is equipped with Bluetooth
technology which enables you to connect the
phone wirelessly to a Bluetooth headset or
hands-free car kit.
Turn on
Bluetooth
1. In Idle mode, press
<Menu> and select
Utilities → Bluetooth →
Activation → On.
2. Select Visibility → On to
allow other devices to find
your phone.
1. In Idle mode, press
<Menu> and select
Utilities → Bluetooth →
My Devices.
2. Press <Search>.
3. Scroll to a device and press
<Add>.
4. Enter a Bluetooth PIN or the
other device’s Bluetooth
PIN, if it has one, and press
<OK>.
When the owner of the
other device enters the
same code, paring is
complete.
5. Scroll to the device you want
and press <Connect>.
Your phone enables an
Internet connection when the
phone is connected to a
computer via Bluetooth
dongle.
Use My Menu
Set up My
Menu item
access
Step outside the phone
Search for
and connect
to a
Bluetooth
device
1. In Idle mode, press [Up].
2. Scroll to a key to be used as
a shortcut.
3. Press <Options> and
select Assign.
4. Scroll to the menu item you
want and press <Assign>.
5. Scroll to an icon for the item
and press <Save>.
Access My
Menu item
1. In Idle mode, press [Up].
2. Press the appropriate
number key.
25
Enter text
2. Select the mode you want.
Arabic,T9 arabic, English Word, ABC, 123,and
Symbol mode
You can enter text in some features, such as
Message, Contacts, or Calendar, T9 arabic and
Arabic mode for Arabic, and English Word and
ABC modes for English. You can also enter
numbers, and symbols.
Changing the text input mode
Example: Writing a text message
1. In the text entry screen, press <Mode>.
Text input
mode indicator
Back Next Mode
Using Arabic mode
You can use the Arabic writing mode. This mode
has the same properties as the English writing
mode which is explained above.
Using T9 Arabic mode and
English Word (T9) mode
26
T9 is a predictive text input mode that allows
you to key in any character using single
keystrokes.
Other T9 Arabic mode and English Word
mode operations
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
Example: Press [4], [3], [5], [5], and [6]
to enter Hello.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
2. Enter the whole word before editing or
deleting the characters.
3. When the word displays correctly, go to step
4. Otherwise, press [0] to display
alternative word choices for the keys that
you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the
next word.
• Press [1] to enter periods or apostrophes
automatically.
• In English Word mode, press [ ] to change
case. Initial capital ( Eng), Lower case
( eng), and Capital lock ( ENG) are
available.
• Press the Navigation keys to move the
cursor.
• Press [ ] to delete characters one by one.
Press and hold [ ] to clear the characters
on the left side of the cursor.
Enter text
Entering a word in T9 Arabic mode and
English Word mode
27
Enter text
Using ABC mode
Other ABC mode operations
Press the appropriate key until the character
you want appears on the screen.
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically, or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press [ ] to change case. Initial capital
( Abc), Lower case ( abc), and Capital
lock ( ABC) are available.
• Press the Navigation keys to move the
cursor.
• Press [ ] to delete characters one by one.
Press and hold [ ] to clear the characters
on the left side of the cursor.
Key
28
Characters in order displayed
Upper case
Lower case
Using 123 mode
123 mode enables you to enter numbers. Press
the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to enter symbols.
1. Press [Up] or [Down] to display more symbol
sets.
2. Press the key corresponding to the symbol
you want.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [ ] to clear the last digit or press
and hold [ ] to clear the whole display.
• Press <Options> and select Pause to
enter a pause between numbers.
2. Press [ ].
The phone locks the keypad to avoid
accidental key presses during a call. To use a
key, first unlock the keypad by pressing
[MP3].
3. When you want to end the call, press [ ] or
close the phone.
29
Call functions
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press
[ ].
When you receive an incoming call, the phone
rings and displays the incoming call image.
Press [ ] to answer the call.
Making an international call
1. In Idle mode, press and hold [0].
The international call prefix you have set
appears.p. 36
2. Enter the area code and phone number and
press [ ].
Making a call from Contacts
Once you have stored a number in Contacts,
you can dial the number by selecting it from
Contacts.p. 38
You can also use the speed dialling feature to
assign number keys to your most frequently
dialled numbers.p. 41
30
Tips for answering a call
• Depending on the setting in the Call receive
menu, you can press any key, except for
[ / ], the soft keys, and [ ], or just open
the phone to answer a call.p. 36
• Press <Reject> or [ ], or press and hold
[ / ] to reject a call.
• Press <Silent> or [ / ] to mute the ringer.
Viewing missed calls
If you have missed calls, the screen displays
the number of the calls and the phone number
of the last call.
Press [ ] to dial the displayed number.
Adjusting the volume during a call
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the right
side of the phone. The button on the headset
works as follows:
Use [ / ] to adjust the earpiece volume during
a call.
Press [ ] to increase the volume level and [ ]
to decrease the volume level.
To
Press
redial the last call
and hold the button
twice.
answer a call
and hold the button.
end a call
and hold the button.
Call functions
Using the headset
Answering a second call
If you have activated the call waiting feature,
you can answer another call during a call.
1. Press [ ] to answer a second call. The first
caller is placed on hold and you are
connected with the second caller.
2. Press [ ] again to switch between the calls.
Options during a call
Making a three-way call
You can access a number of functions during a
call.
If you have subscribed the three-way calling
service, you can have a conversation with two
people simultaneously.
31
Call functions
1. During a call, press [ ] and make another
call. The first caller is placed on hold.
2. Press [ ] to begin the three-way call.
Recording your call conversation
You can record your conversation during a call.
Press and hold [
] to start recording.
p. 83
Using In-call options
During a call, press <Options> to access the
following options:
• Switch to headset/Switch to phone:
switch the call to an optional Bluetooth
headset or hands-free car kit, or back to the
phone. To use this feature, you first need to
connect the phone and the headset or
car kit.p. 90
32
• Voice mute: switch off your phone’s
microphone, so that the other person cannot
hear you.
• Key mute: mute key tones that the keypad
generates each time you press a key.
• Voice memo: record your call conversation
during a call.p. 83
• Noise cancellation: activate the noise
cancellation feature, which removes noise
from your surroundings so that the other
person on the phone can hear you more
clearly. You can also press [Up].
• Calls: access the Calls menu.p. 33
• Contacts: access the Contacts menu.
p. 38
• Message: access the Message menu.
p. 60
• Utilities: access the Utilities menu.
p. 74
Menu functions
All menu options listed
Some menus may not be available depending
on the network
Calls
(Menu 1)
Use the Calls menu to access call logs, view the
duration of calls, and set options for call
functions.
To access this menu, press <Menu> in Idle
mode and select Calls.
Missed (Menu 1.1)
This menu displays the most recent calls you
did not answer.
Accessing a call record
1. Select a call.
2. Press [ ] to dial the number, or press
<Edit> to edit and dial or save the number.
Using call record options
While viewing call details, press <Options> to
access the following options:
• SMS: send a message to the selected
number.
• Erase: erase the call record.
• Contact: access contact information, if the
caller is saved in Contacts.
• Call reject: add the number to the Reject
number list.
Incoming (Menu 1.2)
This menu displays the most recent calls you
have received.
33
Menu functions
Outgoing (Menu 1.3)
This menu displays the most recent calls you
have dialled.
Rejected (Menu 1.4)
This menu displays the most recent calls you
have rejected. Calls rejected by the Call reject
setting are also recorded in this menu.
Air time (Menu 1.5)
This menu displays the time log for calls you
have made or received. Actual time invoiced by
your service provider will vary.
This feature is not intended to be used for
billing purposes.
• Last call: display the air time of the last
call.
34
• Total call: display the number of all voice
calls and data calls and the total duration of
the calls.
• Incoming call: display the total duration of
all incoming calls.
• Outgoing call: display the total duration of
all outgoing calls.
To erase the selected time log, press <Erase>.
Area code
(Menu 1.6)
Use this menu to find and retrieve area and
country codes to quickly and easily dial phone
numbers.
1. Select a call type, Domestic or
International.
2. Select the area code you want from the code
list and press <Dial>.
Call reject (Menu 1.7)
• Action: select whether a call is simply
ignored or a sound effect is sent to the caller.
If you select Sound effect, you will be
charged for sending the sound effect.
• Sound effect: select a sound to be sent to
the caller when a call is rejected.
Reject number (Menu 1.7.2)
Setting (Menu 1.7.1)
Use this menu to make a list of caller groups
from which you do not want to accept calls.
Use this menu to set how to reject incoming
calls.
• Type: select the number type you want to
reject.
Calls (Menu 1)
Use this menu to make a list of numbers and
groups from which you want to reject calls, and
set how to reject those calls.
To access this menu, you must enter the 4-digit
lock code and press <Ok>. It is preset to 0000
at the factory.
Menu functions
3. When the area code of the selected city
appears on the Dialling mode screen, enter
the rest of the phone number you want.
4. Press <Save> to save the number to
Contacts, or [ ] to dial it.
Use this menu to make a list of the phone
numbers from which you do not want to accept
calls.
Reject group (Menu 1.7.3)
Call settings (Menu 1.8)
Use this menu to set up various settings for
make or answer a call.
35
Menu functions
Call receive (Menu 1.8.1)
Use this menu to select how to answer an
incoming call.
• By send key: the phone answers only when
you press [ ].
• By sliding up: the phone answers when you
open the phone. If the phone is already
open, press [ ].
• By sliding up and any key: the phone
answers when you open the phone and press
any key, except for [ / ], the soft keys, and
[ ].
Call end (Menu 1.8.2)
Use this menu to select how to end a call.
• By sliding down: you can end a call by
closing the phone.
36
• 2sec. after hang up: you can end a call by
closing the phone. The call will be
disconnected after 2 seconds.
• By end key: you must press [ ] to end a
call.
Airplane mode (Menu 1.8.3)
Use this menu to switch the phone to Airplane
mode, or back to Normal mode.
Int’l call prefix (Menu 1.8.4)
Use this menu to set international call service
numbers.
Adding an international call number
1. Press <Add>.
2. Enter a call service number and press
<Save>.
Selecting a call service number
This network service allows incoming calls to be
forwarded to another number.
Contact your service provider to check this
service’s availability.
To set forwarding options:
1. Select a type of call forwarding.
Calls (Menu 1)
Call forward (Menu 1.8.5)
• Busy: calls are forwarded if your line is
busy.
• No answer: calls are forwarded if you do
not answer the phone.
• Busy/no answer: calls are forwarded
when your line is busy or when you do not
answer the phone.
• Unconditional: all incoming calls are
forwarded.
2. Select Enable. To deactivate, select
Disable.
3. Enter a phone number and press <Send>.
Menu functions
Select the call service number you want. The
selected number displays when you press and
hold [0] in Idle mode.
While viewing the number list, press
<Options> to access the following options:
• Edit: edit the selected call service number.
• Erase: erase the call service number.
• Erase all: erase all call service numbers.
Call waiting (Menu 1.8.6)
This network feature alerts you of incoming
calls while you are on the phone.
When this feature is enabled, you can respond
to an incoming call by pressing [ ] while you
are on the phone. This puts the first caller on
hold and answers the second call.
37
Menu functions
Contacts
(Menu 2)
You can store phone numbers and their
corresponding names in your card and the
phone’s memory. The card and phone’s
memory, although physically separate, are used
as if they were a single entity, called Contacts.
To access this menu, press <Menu> in Idle
mode and select Contacts.
Find (Menu 2.1)
Use this menu to find a contact using a person’s
name, group name, memory location, or speed
dial location number.
You can quickly access this menu by pressing
<Find> in Idle mode.
Finding a contact
1. Press [Left] or [Right] to select a search
method.
38
2. Enter the first few letters of the name you
want or speed dial location number, or select
a memory location, or a caller group.
3. Select a contact.
4. Scroll to a number and press [ ] to dial, or
press <Edit> to edit contact information.
Using Contacts options
While viewing contact details, press
<Options> to access the following options:
• Release main #: cancel the main number
setting.
• Set main #: set the number as the main
number for the contact.
• Speed dial: assign a speed dial location
number to the selected number.
• Edit: edit the selected contact.
• Copy: copy the selected number to the
other memory location.
Use this menu to add a new contact to
Contacts.
In the phone’s memory, a name can contain up
to 5 numbers in different categories: Mobile,
Home, Office, Pager, and Fax. You can save only
a single number with a name on the card.
1. Enter a name and press <Select>.
2. Press [Left] or [Right] to select a memory
location.
3. If you have selected Card, press [Down] and
enter a phone number.
If you have selected Phone, change the
settings or enter more information.
• Mobile/Home/Office/Pager/Fax: add a
number for each category.
• Image: press <Edit> and assign one of
the photos you have taken using the
camera or one of the default icons as a
caller ID image.
• E-mail1/E-mail2: press <Edit> and
enter an e-mail address.
• URL: press <Edit> and enter a URL
address.
Contacts (Menu 2)
Add (Menu 2.2)
Adding a new contact
Menu functions
• Move: move the selected number to the
other memory location.
• Erase: erase the contact. If you select a
number, only the number is erased.
• To name card: save the contact as a name
card format.
39
Menu functions
• Group: press [Left] or [Right] and select
one of the default relationship groups,
where the contact is to be added.
• Ringer: press <Edit> and select a
ringtone for the contact.
• Etc: press <Edit> and add a memo
about the contact.
4. When you have finished, press <Save> to
save the contact.
Adding a number to an existing entry in
Idle mode
1. In Idle mode, enter a phone number and
press <Save>.
2. Select Existing entry.
3. Select the contact you want.
4. If you selected a number stored in the
phone’s memory, select a number category.
40
If you select a number stored on the card,
press <Select>. The number will be
replaced.
5. Press <Save> and then <Yes>.
Group settings (Menu 2.3)
Use this menu to set up a caller group list.
Adding a new group
1. When
highlights, press <Add>.
2. Enter a name for the group and press
<Next>.
3. Press [Left] or [Right] to select a ringtone
category.
4. Press [Up] or [Down] to select a ringtone.
Press <Play> to listen to the selected
ringtone.
5. Press <Save>.
Managing a group
3. Press <Select>.
4. Select a contact from the contact list.
5. Select a number.
Editing speed dial entries
Assigning speed dial numbers
Viewing a speed dial map
1. Press [Left] or [Right] to select All or
Empty.
2. Enter the location number you want or scroll
to the desired number.
Entering a number lists all of the location
numbers containing the entered number.
When the category field on the Speed dial
screen is highlighted, press <Map> to view a
Speed dial map showing occupied and
unoccupied locations.
Press <List> to return to the speed dial list.
Contacts (Menu 2)
Once you have stored phone numbers in
Contacts, you can set up to 99 speed dial
entries and then dial them easily by pressing
the associated one or two number keys.
1. Press [Left] or [Right] to select Assigned.
2. Enter the location number you want or scroll
to the number.
3. Press <Edit> to change the phone number
for the location, or <Erase> to erase the
speed dial setting or <SMS> to send a
message to the selected number.
Speed dial (Menu 2.4)
Menu functions
Press <Edit> to change the properties of the
selected group or press <Options> to access
the following options:
• New: add a new group.
• Erase: erase the selected groups.
41
Menu functions
Dialling speed dial numbers
Using name card options
• For 1-digit locations, press and hold the
corresponding number key in Idle mode.
• For other locations, press the first number
key and press and hold the last number key
in Idle mode.
While viewing the name card list, press
<Options> to access the following options:
• Edit: edit the selected name card.
• Add namecard: add a new name card.
• Copy to contacts: save the name card as a
contact.
• Erase: erase the name card. This option is
not available for your name card.
Name card (Menu 2.5)
Use this menu to create your name card. You
can also send a Contacts entry in name card
format.
Creating your name card
1. Select My Name Card.vcf.
2. Press <Options> and select Edit.
3. Create your name card as you would store a
phone number.
4. Press <Save> to save your name card.
42
My phone # (Menu 2.6)
Use this menu to view and change your phone
number.
Press <Edit> and enter your phone number.
Memory info (Menu 2.7)
Use this menu to check the number of contacts
you have stored in the phone’s memory and on
the UIM card.
Multimedia
(Menu 3)
Use this menu to take a single photo or a series
of photos, or record a video. The camera
produces JPEG photos and MP4 video clips.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Multimedia (Menu 3)
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take photo (Menu 3.1)
Menu functions
Using the camera module built into your phone,
you can take photos of people or events while
on the move. You can also record videos by
using your phone as a camcorder.
In the Multimedia menu, you can take photos,
record videos, and access your photos and
video clips.
To access this menu, press <Menu> in Idle
]
mode and select Multimedia, or press [
in Idle mode.
Taking a photo
1. Access the Take photo menu or press and
hold [
] in Idle mode.
The camera turns on and the image to be
captured displays.
2. When you use the camera for the first time,
press [2] to change the preview screen.
3. Press [1] to select the camera mode until
the mode icon you want appears:
• Single shot ( ): take a photo.
43
Menu functions
• Series shot ( ): take a serial of action
stills.
• Divided shot ( ): take several stills and
save them in one frame.
• Video cam ( ): record a video clip.
p. 46
4. Make any desired adjustments.
• You can use the following keys to
customise the image settings.
Key
Function
[Left]/
[Right]
Zooms in or out.
(unavailable for 1280*960
resolution)
[Up]/[Down] Adjusts the brightness.
44
[ ]
Shows the mirror image.
[1]
Changes the camera
mode.
Key
Function
[2]
Switches the display
between No icon view
( ), Icons view ( ),
Guideline view ( ), and
Actual ratio view ( ).
[3]
Sets the timer.
[4]
Turns the flash on or off.
[0]
Access Quick view mode.
• You can change settings by pressing
<Options>.p. 45
] to take a
5. Press <Capture> or [
photo.
Reviewing a photo immediately after
saving
<
view one of the
series shot photos
<Expand>.
save the photo
<Save>. The photo is
saved in the My
album folder.
return to Capture
mode
<Cancel> or [
Using camera options in Capture mode
Press
>.
].
In Capture mode, press <Options> and then
[Left] or [Right] to access the following options:
• Mode: use the following camera modes:
Single shot: take a photo in normal mode.
45
Multimedia (Menu 3)
rotate the image
After saving a photo, you can view the photo by
pressing [0] in Capture mode. The captured
image displays on the screen:
• To access the file properties, press
<Options> and select Info.
• To delete the file, press <Options> and
select Delete.
• To return to Capture mode, press [0] or
[ ].
6. To
Menu functions
When you are taking serial shot images, the
camera takes photos successively.
Menu functions
•
•
•
•
•
•
46
Series shot: take series of action stills. You
can select the number of photos the camera
will take.
Divided shot: take several stills and save
them in one frame. You can select the
layout.
Video cam: record a video clip.
Flash: turn the flash on or off.
Size/Quality: select an image size or
quality.
White balance: adjust the colour balance of
the photo. You can make your photo appear
warmer or cooler.
Self timer: set a time delay before the
phone takes a photo.
Revision: apply a special effect or use a
decorative frame.
Preview layout: select the default preview
mode. When you select Actual ratio, the
phone shows the image in actual ratio.
• Quick view: switch to Quick view mode.
Recording a video
1. In Capture mode, press [1] to select the
icon.
2. Make any desired adjustments.
• You can use the following keys to
customise the image settings.
Key
Function
[Up]/[Down] Adjusts the brightness.
[Left]/
[Right]
Zooms in or out.
[ ]
Shows the mirror image.
[1]
Changes the camera
mode.
Function
[2]
Switches the display
between No icon view
( ), Icons view ( ),
Guideline view ( ), and
Actual ratio view ( ).
Sets the timer.
[4]
Turns the flash on or off.
[0]
Access Quick view mode.
• You can change settings by pressing
<Options>.p. 48
3. Press < > or [
] to start recording.
Press < > to pause recording, and then
press < > to resume.
5. To
Press
review the video clip < >.
save the video clip
<Save>. The video is
saved in the My
album folder.
return to Camcorder <Cancel> or [
mode
Multimedia (Menu 3)
[3]
4. When you are finished, press < > or
[
].
Menu functions
Key
].
Reviewing a video immediately after
saving
After saving a video clip, you can play the video
clip in Quick view mode by pressing [0] in
Camcorder mode. Pressing < > initiates
playing of the video clip.
• To access file properties, press <Options>
and select Info.
47
Menu functions
• To delete the file, press <Options> and
select Delete.
• To return to Camcorder mode, press [0] or
[ ].
Using camera options in Camcorder
mode
In Camcorder mode, press <Options> and
then [Left] or [Right] to access the following
options:
• Mode: use the following camera modes:
Single shot: take a photo in normal mode.
Series shot: take series of action stills. You
can select the number of photos the camera
will take.
Divided shot: take several stills and save
them in one frame. You can select the
layout.
Video cam: record a video clip.
• Flash: turn the flash on or off.
48
• Size/Quality: select an image size or
quality.
• White balance: adjust the colour balance of
the video. You can make your video appear
warmer or cooler.
• Self timer: set a time delay before the
phone records a video.
• Revision: apply a special effect.
• Voice rec: turn the audio on or off.
• Preview layout: select the default preview
mode. When you select Actual ratio, the
phone shows the image in actual ratio.
• Quick view: switch to Quick view mode.
My album (Menu 3.2)
Use this menu to review the photos you have
taken and the videos you have recorded.
Photos and videos captured on other devices,
such as digital cameras, may not display
correctly.
Creating a new folder
1. Select Gallery.
The following icons may appear on the file
list to show the file type:
• No icon: Photo
•
: Video clip
•
: Slide show file
1. On the My album screen, press <Create>.
2. Enter a name for the folder and press
<Save>.
2. Scroll to the photo you want and press
<Expand> to view the photo.
3. Press [Left] or [Right] to view other photos.
4. Press <Multi> to return to the thumbnail
images.
Press <Enlarge> to view the photo on a full
screen.
Viewing a slide show
You can view your photos as a slide show, a
sequential presentation of each photo in the
current folder.
Multimedia (Menu 3)
You can access other folders, if any, by
pressing [ ] and [Left] or [Right] and then
[ ].
Menu functions
Viewing a photo
1. From the folder list, scroll to a folder.
2. Press <Options> and select Slide show.
3. Select a slide show effect.
The slide show begins.
4. Press [
] to stop the slide show.
Creating your own slide show file
1. On the file list, press <Options> and select
Slide show.
49
Menu functions
2. Scroll to an empty location and press
<Import>.
3. Press <Check> to select photos to be
added, and then press <Done>.
4. Move to the effect apply option field and
press [Left] or [Right] to select how to apply
slide show effects.
• Separate: you can apply different effects
to each photo.
• Common: you can apply one effect to all
photos.
5. If you selected Separate, select a slide
show effect for each photo and press <Ok>.
If you selected Common, move to the effect
type field and select a slide show effect.
6. After adding photos, press <Options> to
access the following options:
• Preview: view the photos as a slide
show.
50
• Change order: change the order of the
photos.
• Save: save the photos as a slide show
file.
• Erase: erase the selected photo.
7. When you have finished, press <Save>.
8. Select an image folder to store the slide
show file.
9. Enter a name for the file and press <Save>.
Viewing a video clip
From the photo list, press <Options> to access
the following options:
• Assign: set the image as your wallpaper for
the idle screen, the opening or closing
image, or the caller ID image for a Contacts
entry.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Photo studio: access the Photo studio
menu.p. 53
• Lock/Unlock: lock the file so that other
people cannot access it without your lock
code, or unlock the file.
• Grid(4)/Grid(9): view 4 photos or 9 photos
on each screen.
• Sort: change the sort order of the file list.
• Slide show: create a new slide show file.
• Erase: erase the file.
1. Select Gallery.
2. Scroll to the video clip you want and press
<Expand>. Video clips are indicated by the
icon.
3. Press <Play> to play the video clip.
Menu functions
Using photo options
Multimedia (Menu 3)
Even if the phone is in Silent mode, it will play
the sound.
During playback, use the following keys:
Key
[
Function
]
Pauses or resumes playback.
[Left]
Moves back to the previous file.
Moves backward in a file when held
down.
[Right]
Skips to the next file. Skips
forward in a file when held down.
[Up]
Changes the repeat mode.
51
Menu functions
Key
Function
[Down]
Returns to the video image screen.
[ / ]
Adjusts the volume.
<STOP>
Stops playback.
Using video options
When a video clip is selected, press <Options>
to access the following options:
• Set wallpaper: set the video clip as your
wallpaper for the idle screen
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Rename: change the file name.
Do not use special characters, such as /, :,
*, ?, ”, <, >, or \.
52
• Lock/Unlock: lock the file so that other
people cannot access it without your lock
code, or unlock the file.
• File info: access the file properties.
• Erase: erase the file.
Using album options
From the My album screen, press <Options>
to access the following options:
• Rename: change the folder name.
Do not use special characters, such as /, :,
*, ?, ”, <, >, or \.
• Lock/Unlock: lock the selected image folder
so that other people cannot access it without
your lock code, or unlock the folder.
• Create folder: add a new image folder.
• Erase folder: erase the selected image
folder.
Photo studio (Menu 3.3)
Wizard effect (Menu 3.3.1)
You can apply a special effect to a photo.
1. Select a photo from the My album folder.
2. Press [Left] or [Right] to select an effect.
You can compare the photo with the original
one by pressing <Compare> and then
<Ok>.
3. Press <Save>.
4. Enter a name for the photo and press
<Save>.
You can change the colour tone of a photo.
1. Select a photo from the My album folder.
2. Press [Left] or [Right] to select a tone.
You can compare the photo with the original
one by pressing <Compare> and then
<Ok>.
3. Press <Save>.
4. Enter a name for the photo and press
<Save>.
Multimedia (Menu 3)
Photo studio is a great tool for managing
photos. Use this menu to edit photos by
applying special effects and adding comments.
Basic effect (Menu 3.3.2)
Menu functions
• Slide show: select a sidle show effect and
show the images stored in the selected
folder as a slide show.
Decoration (Menu 3.3.3)
You can add a decorative frame, clip, or photo
cut-out to a photo. You can also add text to the
photo.
1. Select a photo from the My album folder.
2. Press <Options> to access one of the
following editing options:
53
Menu functions
• Fun frame: select a decorative frame
using [Left] or [Right].
• Clip: select an image clip. You can move
it to the position you want by pressing the
Navigation keys.
• Photo sticker: select a photo cut-out.
See the next section.
• Text: enter text. After entering text, you
can change the font size and colour, and
the brightness of the font colour. You can
then move text to the position you want
by pressing the Navigation keys.
3. After adding decorations, press <Save>.
4. Enter a name for the photo and press
<Save>.
Photo sticker (Menu 3.3.4)
You can make a photo cut-out using a photo.
1. Select a photo from the My album folder.
54
2. Scroll to a cut-out type using [Left] or
[Right] and press <Select>.
3. Press [Left] or [Right] to adjust the cut-out
size and press <Next>.
4. Move the photo cut-out to the position you
want using the Navigation keys and press
<Save>.
The part of the photo is saved as a photo
cut-out.
Video capture (Menu 3.3.5)
You can save a single video clip frame as a
photo.
1. Select a video clip from the My album
folder.
2. When the part of the video clip you want to
capture appears, press <Capture>.
3. Press <Save>.
4. Enter a name for the video clip frame and
press <Save>.
Revision (Menu 3.3.7)
You can make a new image by combining two
photos.
You can change the image properties of a
photo, such as the contrast, brightness,
saturation, or blur.
1. Select a photo from the My album folder.
2. Press <Options> to access the following
options:
• Sharpness: adjust the image sharpness.
• Brightness: adjust the image
brightness.
• Saturation: adjust the degree of the
grey of the image colour.
• Blur: adjust the clarity of the image.
3. After changing the properties, press <Ok>.
You can compare the photo with the original
one by pressing <Compare> and then
<Ok>.
4. Press <Save> to save the photo.
Multimedia (Menu 3)
1. When the Main Image field highlights,
press <Import>.
2. Select a photo from the My album folder.
3. Move to the BG Image field and press
<Import>.
4. Select a photo.
5. Press <Next>. The two photos are
combined.
6. Press [Left] or [Right] to adjust the image
brightness and press <Save>.
7. Enter a name for the composition and press
<Save>.
Menu functions
Composition (Menu 3.3.6)
55
Menu functions
5. Enter a name for the photo and press
<Save>.
Resize (Menu 3.3.8)
You can change the size of a photo. You cannot
resize 176x144 images.
1. Select a photo from the My album folder.
2. Press <Change> and select the size you
want.
3. Press <Save>.
4. Enter a name for the photo and press
<Save>.
Flip (Menu 3.3.9)
You can change the orientation of a photo.
1. Select a photo from the My album folder.
2. Pressing [Left] or [Right] to scroll to a
direction icon:
(Rotation),
(Horizontal
flip), or
(Vertical flip).
56
3. Press [Up] or [Down] to flip or rotate the
photo and press <Save>.
4. Enter a name for the adjusted photo and
press <Save>.
Text composition (Menu 3.3.0)
You can extract text from a photo and add it to
another photo.
It may not be possible to extract text from a
non-mono colour background photo.
1. When the Main Image field highlights,
press <Import>.
2. Select a photo from the My album folder.
3. Move to the Char Image field and press
<Import>.
4. Select a photo.
5. Press <Next>. The text from the character
image are merged into the main image as a
stamp effect.
Settings (Menu 3.4)
(Menu 4)
The Display menu enables you to change
various settings for the display and light.
To access this menu, press <Menu> in Idle
mode and select Display.
Screen saver (Menu 4.1)
Use this menu to change the background image
to be displayed in Idle mode.
• Basic: select one of default images.
• My album: select one of photos and video
clips you have saved.
Display (Menu 4)
Use this menu to change the default settings for
the options when using the camera.
• Photo sound: select a sound to indicate a
shutter release and a self timer sound.
• Interruption: set whether to accept calls,
messages, or alarm alerts while in Capture
mode or Camcorder mode.
• Reset: restore the default settings for the
camera.
• Auto saving: set whether the camera saves
an image automatically after taking it.
• Album lock: lock the photos so that no one
can view your photos and video clips without
your permission
Display
Menu functions
6. Press <Save>.
7. Enter a name for the photo and press
<Save>.
Functional screen (Menu 4.2)
Use this menu to select a function screen, such
as calendar memo, today, or memo pad, to be
displayed in Idle mode.
A function screen cannot be used with video
wallpaper.
57
Menu functions
Menu type (Menu 4.3)
Single clock (Menu 4.6.1)
Use this menu to select the menu display style.
You can set the current time and date.
Enter the time in 24-hour format and the date
in the order of year, month, and day.
While in a service area, you are not allowed to
change the time and date setting since the
phone receives time information from the
network. If your phone do not receive time
information from the network when you turn it
on, you can use this menu.
Power on/off (Menu 4.4)
Use this menu to select the image that the
phone displays when it is switched on or off.
Dialing font (Menu 4.5)
Use this menu to select a font style for digits to
be displayed when you enter a phone number
for dialling.
Time setting (Menu 4.6)
Use this menu to set the current time and date
or set up the time zones for the Dual Clock
wallpaper.
58
Dual clock (Menu 4.6.2)
You can choose two time zones to be displayed
when you select Dual clock for the wallpaper
image.
1. Press [Left] or [Right] to select the time
zone for the upper clock and press [Down].
2. Press [Left] or [Right] to select the time
zone for the lower clock.
3. Press <Save>.
Backlight (Menu 4.7)
Use this menu to activate or deactivate the
flashlight function. When the function is
activated, you can use the phone as a
flashlight.
To turn on the flashlight:
1. Press and hold [ ] with the phone closed.
2. Open the phone.
To turn off the flashlight, close the phone.
Display (Menu 4)
Use this menu to customise settings for
backlight.
• Main LCD: select the length of time the
backlight stays on.
• Lcd brightness: adjust the brightness of
the main display for varying lighting
conditions.
• Keypad: select the keypad backlight mode.
Save mode: the phone uses the backlight
only between 17:00 and 8:00. This mode
saves the battery power.
Normal mode: the phone flashes the
backlight when you press any key.
Lighting (Menu 4.8)
Menu functions
You can apply daylight saving time for each
clock. When a clock highlights, press
<DST On>.
59
Menu functions
Message
(Menu 5)
Use the Message menu to send or receive text
messages. You can also use the voicemail and
web alert features.
To access this menu, press <Menu> in Idle
mode and select Message, or press [Left].
New message (Menu 5.1)
Use this menu to create text messages and
send them to multiple mobile phones.
1. Enter the message text and press <Next>.
2. Press [Down] to change the following
options:
• Priority: set the priority level of the
message.
• Ack: activate or deactivate the delivery
acknowledgement feature. When this
feature is activated, the network informs
60
you whether or not your message is
delivered to the recipient.
• Save: select one of the following saving
options:
Save&Send: save a copy of the message
and send the message.
Send only: send the message. The
message will be deleted after sending.
Save only: save the message in the
Draft folder to be sent later.
3. Press <Next>.
4. Enter a phone number.
To send the message to multiple
destinations, press [Down] to enter
additional numbers.
5. When you have finished, press <Send> to
send and/or save the message.
Inbox (Menu 5.2)
A red icon with ! means that the message is
urgent.
means that the message is saved on
the card.
Using message options
While viewing a message, press <Options> to
access the following options:
• Erase: erase the message.
• Forward: forward the message to other
people.
• Call/Save: make a call to the sender’s
phone number or save the number to
Contacts.
• Copy: copy the message to the other
memory location.
• Move: move the message to the other
memory location.
Message (Menu 5)
Viewing a message at the time of its
receipt
When the phone receives a text message, the
phone sounds a message alert and displays a
text notification. Press <Select> to view the
message immediately.
Viewing a message in Inbox
When you access Phone or Card in the Inbox
menu, a list of the received messages displays.
Icons displayed on the list indicate the
messages’ status:
•
Unread
•
Read
1. Select the message you want.
2. To send a reply to the sender, press
<Reply>.
3. Press [Left] or [Right] to view other
messages.
Menu functions
This folder stores messages you have received.
61
Menu functions
Accessing voicemails
When you receive a voicemail, a text
notification displays. Press [ ], and the phone
dials the voicemail centre. Then follow the voice
prompts from the system to listen to the
message.
You can also check your voicemails by accessing
Voice mail in the Inbox menu.
In Idle mode, you can press and hold [1] in
Idle mode to access the voicemail centre.
Outbox (Menu 5.3)
This folder stores messages you have sent or
failed to send.
Viewing text messages
62
When you access Phone or Card in the
Outbox menu, a list of sent or saved messages
appears. Icons displayed on the list indicate the
messages’ status:
•
•
Sent
Failed to be sent
A red icon means that the message is urgent.
means that the message is saved on the card.
1. Select the message you want.
2. To forward the message to other people,
press <Forward>.
3. Press [Left] or [Right] to view other
messages.
Using message options
While viewing a message, press <Options> to
access the following options:
• Erase: erase the message.
• Resend: send the message to the recipient
again.
• Call/Save: make a call to the sender’s
phone number or save the number to
Contacts.
Draft (Menu 5.4)
Use this menu to customise the settings of
various options for receiving or sending
messages.
• Scroll timer: set the time interval in which
the phone scrolls to a following screen, 1
through 5 seconds.
When this option is set to Off, you can
manually scroll to the next screen using [Up]
or [Down].
• Msg. reminder: set how often the phone
reminds you of new messages.
• Alert on call: set whether or not the phone
informs you when you receive a new
message during a call.
• Template Msg: preset sentences to use
when composing a new message.
• New message: customise the settings for
your outgoing messages.
Priority: set the priority level of messages.
Message (Menu 5)
This folder stores messages you have saved to
send at a later time.
While viewing a message, press <Options> to
access the following options:
• Erase: erase the message.
• Forward: forward the message to other
people.
• Call/Save: make a call to the recipient’s
phone number or save the number to
Contacts.
Settings (Menu 5.5)
Menu functions
• Copy: copy the message to the other
memory location.
• Move: move the message to the other
memory location.
63
Menu functions
Delivery ack: activate or deactivate the
delivery acknowledgement feature. When
this is activated, the network informs you
whether your message is delivered to the
recipient or not.
SOS message (Menu 5.6)
In an emergency, you can send SOS messages
to your family or friends for help. Use this menu
to specify options for sending SOS messages.
Setting up SOS message options
1. Press [Left] or [Right] to select On to
activate the SOS message feature.
2. Press [Down] and specify the following
options:
• Recipients: specify the phone numbers
to which you want to send SOS
messages.
64
• Number of sending: set the number of
times the phone repeats sending SOS
messages..
You can view the onscreen help by pressing
<Help>.
Sending an SOS message
When your phone is closed, press [ / ] 4
times.
The phone switches to Emergency mode and
sends the preset SOS message. To exit
Emergency mode, press [ ].
Msg wallpaper (Menu 5.7)
Use this menu to select a background image to
be displayed on the Message screen so that you
can view messages with the image.
Use this menu to adjust the ringer volume for
voice calls, messages, alarms, scheduler
alarms, and function alerts. You can also set the
ringer type for voice calls.
• Level 1~5: select one of the volume levels.
• Ringer only: the phone sounds the ringer
melody selected in the Ringer menu.
• Silent: the phone neither vibrates nor rings.
• 1 Beep: the phone sounds a beep.
• Vibration: the phone vibrates.
• Vib. & ringer: the phone vibrates and rings
at the same time.
• Vib. then ringer: the phone vibrates and
then rings.
• Ringer then vib.: the phone rings and then
vibrates.
Sounds
(Menu 6)
The Sounds menu allows you to customise
various sound settings.
To access this menu, press <Menu> in Idle
mode and select Sounds.
Even if the phone is in Silent mode, it will sound
while you customise the sound settings.
Ringer (Menu 6.1)
Use this menu to set the ringer for voice calls,
messages, alarms, and schedule alarms
separately.
Sounds (Menu 6)
Ringer vol./type (Menu 6.2)
Use this menu to check the number of
messages you have stored in the phone’s
memory and on the UIM card.
Menu functions
Memory info (Menu 5.8)
65
Menu functions
Key tone (Menu 6.3)
Use this menu to select the type of tones that
the keypad sounds each time you press a key.
You can adjust the key tone volume using
[ / ] in Idle mode.
Function alert (Menu 6.4)
Use this menu to set up audible alerts at a
specified time to inform you that certain things
have happened.
• Themes: select an alert tone.
• Alert on/off: turn each alert on or off.
Select/Saving: set the phone to sound an
alert when you save your selection or change
a menu function.
Cancel/Warning: set the phone to sound
an alert when you cancel your selection or
change when a confirmation message
appears.
66
Slider: set the phone to sound an alert
when you open the phone.
Connect: set the phone to sound a connect
tone when your call is connected to the
system.
Disconnect: set the phone to sound a
disconnect tone when a call is disconnected
by the other person.
Power on/off: set the phone to sound an
alert when you turn on or off the phone.
Exit silent mode: set the phone to sound
an alert when you exit Silent mode.
Call time alert: set the phone to sound an
alert every minute during a call.
Hour alert (Menu 6.5)
Entertainment
Use this menu to set phone to sound an alert
every hour on the hour.
Using the Entertainment menu, you can play
games or MP3 music and create own melodies.
To access this menu, press <Menu> in Idle
mode and select Entertainment.
Menu functions
Games (Menu 7.1)
Entertainment (Menu 7)
1. Select On and press [Down].
2. Enter the time period for the phone to sound
the hour alert and press [Down].
3. Select an alert type and press <Save>.
(Menu 7)
You can enjoy fun games on your phone.
1. Select the game you want.
2. Press any key except for [ ] and [ / ].
The phone displays the following options;
options vary depending on the selected
game:
• NEW GAME/NEW: start a new game.
• CONTINUE: restart the game you last
played.
• RECORD: check the high score table.
67
Menu functions
• MENU/OPTION: change the game
settings.
• HELP: give you the information about
how to play the game.
• EXIT: exit the game.
3. Select NEW GAME or NEW.
MP3 (Menu 7.2)
Use this menu to enjoy MP3 music.
You can quickly access this menu by pressing
[MP3] in Idle mode and launch the MP3 player
by pressing and holding the key.
MP3 player (Menu 7.2.1)
You can play MP3 music files. First, you need to
save MP3 files in your phone’s memory.
68
Downloading MP3 files
To download MP3 files to the phone, connect
the phone to a computer and copy to the
phone.p. 80
Creating the play list
Before playing MP3 music files, you need to add
them to the play list. If the play list is empty,
the list of the MP3 files stored in your phone
displays.
1. Press <Options> and select Add to play
list.
2. Press <Check> to select the files you want.
3. Press <Add>.
4. To play the music files, press <Play>.
Playing MP3 music files
From the MP3 player screen, press [
begin playback.
] to
Even if the phone is in Silent mode, it will play
the music.
During playback, use the following keys:
Function
]
Pauses or resumes playback.
[
]
• Skips to the previous file if pressed
within 3 seconds after the playback
has started.
• Skips to the beginning of the file if
pressed 3 seconds after playback
has started.
• Skips backward in a file when held
down.
[
]
• Skips to the next file.
• Skips forward in a file when held
down.
[ / ]
Adjusts the volume.
<List>
Opens the play list.
Function
<A-B>
Repeats a section of your choice.
Pressing this key begins a search for
the starting point. To search for the
end point, press <A→B>.To stop
repeating, press <A↔B>.
Using MP3 player options
During playback, press <Options> to access
the following options:
• Go to my music: access the file list.
• Repeat: change the repeat mode.
• Set to ringer: set the music file as a
ringtone for incoming calls, alarms, or
scheduler alarms.
• Timer: set the length of time the MP3 player
stays on. The timer appears to show you the
time remaining.
• Key lock: lock the exposed keys on the
phone except for [ / ] when you close the
Entertainment (Menu 7)
[
Key
Menu functions
Key
69
Menu functions
phone so that you can prevent an accidental
press of the keys from affecting playback. To
unlock the keys, press and hold [ ],
[MP3], [
], or Navigation keys.
• Backlight: select the length of time the
backlight remains on while playing an MP3
file.
Default: the backlight turns off after the
period of time set in the Backlight menu.
Always on: the backlight does not turn off.
• Visual effect: change the playback
animation.
• File info: access the file properties.
MP3 play list (Menu 7.2.2)
Use this menu to access the play list you have
created.
Press <Options> to access the following
options:
• Add to play list: add files to the play list.
• Remove: remove files from the play list.
• Visual effect: change the playback
animation.
• Go to my music: access the file list.
• File info: access the file properties.
MP3 files (Menu 7.2.3)
Use this menu to access MP3 files stored in the
phone’s memory.
Press <Options> to access the following
options:
• Open files: open the music file list.
70
• Sort: change the sort order of the file list.
• File info: access the file properties.
• Set to ringer: set the music file as a
ringtone for incoming calls, alarms, or
scheduler alarms.
• Erase: erase the selected files.
• Create folder: add a new folder.
Use this menu to customise settings for using
the MP3 player feature.
• Skip length: select the interval by which
the phone skips forward or backward
through a music file when you press and
hold [
] or [
].
• Load default: restore the default settings
for the MP3 player.
• Clock view: set whether the MP3 player to
display the current time.
Entertainment (Menu 7)
Do not use special characters for a file
name, such as /, :, *, ?, ”, <, >, or \.
MP3 settings (Menu 7.2.4)
Menu functions
• Add to play list: add the MP3 files in the
selected folder or the selected MP3 file to the
play list.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Rename: change the file name.
Melody composer (Menu 7.3)
Melody composer is a great tool that allows you
to compose your own melodies using a variety
of musical components.
Compose melody (Menu 7.3.1)
When you access this menu, a stave screen
displays with a selection point at the first note
position.
71
Menu functions
Creating a melody
You can compose a melody of up to 10 pages
and you can insert 12 notes or rests onto each
page.
1. Move the selection point up or down.
2. When you have placed the selection point to
your satisfaction, press <Input>.
3. Select a note or rest.
The note or rest is inserted onto the stave
and the selection point moves to the right on
the same line.
4. Repeat steps 1 to 3 to add more notes and
rests.
You can also add a background melody,
change the tempo, or adjust the volume by
using composer options.next section
5. When you have finished, press <Save>.
6. Enter a name for your melody and press
<Save>.
72
Using composer options
While composing a melody, press <Options>
to access the following options:
• New: open a new composer screen.
• Open: open the list of the melodies you
have composed.
• Play: play back the current melody.
• Save: save the melody.
• Save as: save the melody with a different
name.
• Instrument: change the musical instrument
for the melody.
• BGM: use a background melody.
• Add note: add notes to the melody.
• Tempo: change the tempo.
• Volume: adjust the volume level of the
main and background melodies separately.
Entertainment (Menu 7)
1. Select an entered note or rest by moving the
selection cell.
The colour of the selected item changes to
red to indicate that it is in Edit mode.
2. Change the position or type of the note or
rest the same as you would when inserting
it.
• Press [Up] or [Down] to move a note to
the next lower or higher position by tone.
• Press [ ] or [ ] to move a note to the
next lower or higher position by semitone.
• Press <Input> to add a note or rest.
• Press <Options> to access the following
options:
Range: select more than one note or
rests.
Copy: copy the selected notes and/or
rests.
Cut: delete the selected notes and/or
rests.
Paste: paste the copied notes and/or
rests to the position next to the currently
selected note or rest.
Change: change the type of the currently
selected note or rest.
Delete: delete the selected notes and/or
rests.
Play: play back the current melody.
3. After editing, press <Save> to save
changes.
To save the melody under a different name,
move the selection cell to an input position,
press <Options>, and select Save as.
Menu functions
Editing a melody
While composing a melody or after opening a
saved melody, you can edit it.
73
Menu functions
My melodies (Menu 7.3.2)
Utilities
Use this menu to play the melodies you have
created.
Playing a melody
Scroll to the melody you want and press
<Play>.
Using melody options
While viewing the melody list, press
<Options> to access the following options:
• Set to ringer: set the melody as a ringtone
for incoming calls, alarms, or scheduler
alarms.
• Rename: change the melody name.
The Utilities menu enables you to keep track of
your schedule and tasks, set alarms, or use
convenient features, such as a calculator, voice
recorder, and counter.
To access this menu, press <Menu> in Idle
mode and select Utilities.
Do not use special characters, such as / or \.
• Erase: erase the selected melody.
• Erase all: erase all melodies.
• View details: access the melody properties.
74
(Menu 8)
Today (Menu 8.1)
Use this menu to view information of tasks,
countdown timer, and scheduled events for the
current day. The following icons may be shown
according to the types of items:
•
Countdown timer
•
Personal
•
Business
•
Anniversary
•
Event
Viewing an event
Using Today options
On the Today view, press <Options> to access
the following options:
• Calendar: go to the calendar.
• Jump to date: enter the specific date you
want to access.
Calendar (Menu 8.2)
Use this menu to view the current month, as
well as the past or future months in the
calendar format. You can be alerted by the
Calendar function before an event commences.
Utilities (Menu 8)
1. On the Today view, press [Up] or [Down] to
scroll through the screen. You can move to
the next or previous day view by pressing
[Left] or [Right].
2. Press <View> to view the details on the
selected item.
• Assign to Idle: set the task, countdown, or
scheduled items to be displayed on the idle
screen.
Menu functions
You can create a new item of the selected type
by pressing <New>.p. 76
You can quickly access this menu by pressing
[Right] in Idle mode.
Consulting the calendar
When you access this menu, today’s date is
automatically selected and the date in calendar
displays on the bottom.
Below the calendar, the number of items for the
current day appears. The following icons
indicate the types of item:
75
Menu functions
•
•
•
•
:
:
:
:
Personal
Business
Event
Anniversary
Selecting a day
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Using calendar options
76
On the calendar, press <Options> to access
the following options:
• View type: change the view mode of the
calendar.p. 77
• Erase events: erase events for the specific
period.
• Erase all: erase all scheduled items.
• Jump to date: enter the specific date you
want to access.
Scheduling an item
You can schedule up to 9 items for one day and
20 events total.
1. Scroll to a day from the calendar.
2. Press <New>.
3. Enter information or change the settings:
• Type: select an item type.
• Start: enter the staring time and date for
the item.
• End: enter the ending time and date for
the item.
• Content: enter your item contents.
• Contacts: enter a phone number.
When the time for the scheduled item
comes and a notification displays in Idle
mode, you can dial this number by
pressing <Call>.
• Image: press <Options> and assign an
image to inform you to the item.
Viewing your schedule
1. Select one of days with scheduled items. The
list of items for that day displays.
2. Select an event.
While viewing an item, press <Options> to
access the following options:
• Edit: edit the selected event.
• New: add a new item.
• Erase: erase the selected item.
You can change the calendar display to
Calendar view, List view or Weekly view. Press
<Options> and select View type → a view
mode.
Calendar
You can view the items as a calendar format.
Select a date and select an event.
Utilities (Menu 8)
Days with scheduled items are indicated with
squares at the corners of the date cell.
Viewing items in a different mode
Menu functions
• Alarm: set an alarm for the item.
• Before: set how long before the item the
alarm is to alert you.
4. Press <Save> to save the item.
List view
You can view the items for the selected date as
a list format. Select a date by pressing [Up] or
[Down] and select an event.
Weekly view
You can view items for the current week. Select
the item you want to view.
77
Menu functions
Task list (Menu 8.3)
Viewing a task
Use this menu to make a list of tasks you need
to do.
When you access the Task list menu, the list of
tasks displays. A red icon next to a task means
that the task is of high priority, and
means
that the task is in progress.
Select the task you want to view from the list.
To change the task item, press <Edit>.
While viewing a task, press <Options> to
access the following options:
• Completed: set the task completed.
changes to
(Blue).
• In process: set the task in the process.
(Blue) changes to .
changes
• Forward: set the task on hold.
to
(Red).
• Erase: erase the selected task.
• Erase all: erase all tasks.
• Purge: erase the tasks of which the
deadlines are expired.
Creating a task item
1.
2.
3.
4.
Press <New>.
Enter the task content and press <Select>.
Select the priority level and press [Down].
Select one of the following options for the
deadline for the item.
• No date: no deadline is set.
• Today: the deadline is set to today’s
date.
• Custom: you can manually enter the
date you need. Press [Down] and enter a
date.
5. Press <Save> to save the task.
78
Alarm (Menu 8.4)
Setting an alarm
Utilities (Menu 8)
1. Select a type of alarm.
2. Select the alarm frequency option on the Set
field by pressing [Left] or [Right].
• Once: the alarm rings just once.
• Daily: the alarm rings every day at the
same time.
• Sat-Thu: the alarm rings from Saturday
to Thursday.
• Select: the alarm rings on the specified
days.
3. If you chose Select, press [Down] and
deselect the days you do not want by
pressing <Uncheck>.
4. Press [Down] to move to the Time field.
5. Enter the alarm time and press [Down].
6. If you selected Wake-up call in step 1,
select an interval for the alarm to sound
again and press [Down].
7. Press <Edit> to specify an alarm ringer.
8. Select a ringtone category.
9. Select the ringtone melody you want.
10.Press [Down] and press <Check> to ring
the alarm in Silent mode.
11.Press <Save> to save the alarm set.
Menu functions
Use this menu to set the alarm to ring at a
specific time.
Stopping an alarm
• To stop an alarm when it rings, press any
key.
• To use the snooze function, press
<Snooze>. The alarm repeats at specified
intervals. Press <End> and then <Yes> to
stop the alarm repeating.
79
Menu functions
Deactivating an alarm
1. On the Alarm list, select the alarm you want
to deactivate.
2. Select Off from the Set field.
User memory (Menu 8.5)
Use this menu to connect the phone to a
computer, as you would use an external
memory disk, and access the file folder of your
phone’s memory.
Connect to PC (Menu 8.5.1)
Use this menu to connect your phone to a
computer.
1. Connect a USB cable to the jack on the right
side of the phone and the USB port of the
phone.
2. Access the Connect to PC menu.
3. Enter the lock code and press <Ok>.
80
Your phone switches to Memory Disk mode.
4. Open My computer on your Windows
desktop and double-click the corresponding
removable disk to open the phone’s file
folder.
5. Copy files from the phone to the computer or
vice versa.
6. When you have finished, close the disk.
7. Press <Exit> to exit Memory Disk mode.
8. Press <Yes> to confirm the exiting.
• When the phone is in Memory Disk mode, all
calls and messages are blocked.
• Use the Safely Remove Hardware program
from the Windows task bar for removing the
USB cable from the computer; otherwise, the
files may be corrupted and, thus, may not be
played properly.
• If you change a folder name, all data in the
folder may be deleted or the corresponding
feature may not work properly.
File manager (Menu 8.5.2)
• Create folder: create a new folder.
• Sort: sort files by name, time, size. You can
change the list order by pressing <Asc> or
<Desc>.
• List view: change the view mode to List
view.
• File info: access the file properties.
Utilities (Menu 8)
Do not use special characters for a file or
folder name, such as /, :, *, ?, ”, <, >, or \.
• Set to ringer: set the MP3 file as a ringtone
for incoming calls, alarm sets, or scheduler
alarms.
• Assign: set the image as your wallpaper for
the idle screen, the opening or closing
image, or the caller ID image for a Contacts
entry.
• Lock/Unlock: lock the file so that other
people cannot access it without your lock
code, or unlock the file.
Menu functions
Use this menu to manage files stored on the
phone’s memory. You can access the folders of
your phone’s memory and manage media files.
From a file list in each folder, press <Options>
to access the following options:
• Erase: erase the file.
• Move: move the file to another folder.
• Copy: copy the file to another folder.
• Rename: change the file name.
Memory info (Menu 8.5.3)
Use this menu to check the amount of memory
currently in use in each media folder.
Format (Menu 8.5.4)
Use this menu to format the phone’s memory.
Created folders and files in each folder will be
erased.
81
Menu functions
File viewer (Menu 8.5.5)
Use this menu to view various document files
and images files stored in the Others folder in
the phone’s memory.
The following file formats are available:
• Documents: Microsoft Word, Microsoft Excel,
Microsoft PowerPoint, Adobe PDF, Plain text,
HTML
• Images: BMP, GIF, JPEG, PNG, WMF, EMF
Depending on the file size, you may not be able
to view some files.
3. Use the following keys to view the
document.
Key
[ / ]
[
82
]/[2]
Zooms in or out.
Rotates the page.
[1]
Returns to the previous page.
Moves to the first page when held
down.
[3]
Moves to the next page. Moves to
the last page when held down.
[4]
Fits the page to the screen width.
[5]
Fits the page to the screen height.
Viewing a file
1. Select a location from which you want to
read files:
• Removable disk: view the various files
imported from your PC.
2. Select the file you want.
Function
Left/
Pans around the page.
Right/Up/
Down
Function
[6]
Displays a map of the current
page, or hides a map of the current
page.
Do not use special characters for a file
name, such as /, :, *, ?, ”, <, >, or \.
• File info: access the file properties.
• Help: view key information you can use.
Use this menu to record voice memos. You can
also use the Voice answer feature.
Voice memo (Menu 8.6.1)
You can record and review voice memos.
Recording a voice memo
Utilities (Menu 8)
Using file options
From the file list, press <Options> to access
the following options:
• Erase: erase the selected file.
• Rename: change the file name.
Voice tools (Menu 8.6)
Menu functions
Key
1. From the Voice memo screen, select
Record.
2. Record a memo by speaking into the
microphone.
While you are recording, a timer displays to
show you the elapsed time.
Press <Pause> to pause recording and then
press <Continue> to resume.
3. Press <Stop> to end recording. The screen
provides you with the following choices:
83
Menu functions
• Save: save the voice memo.
• Re-record: discard the current memo
and record another one.
• Review: play back the voice memo. The
screen displays the length of the memo.
4. When you are satisfied, select Save.
5. Enter a name for the memo and press
<Save>.
Playing a voice memo
1. From the Voice memo screen, select Memo
list.
2. Scroll to a memo and press <Play>.
From the memo list, press <Options> to
access the following options:
• File info: access the file properties.
• Rename: change the name of the voice
memo.
Do not use special characters for a file
name, such as /, :, *, ?, ”, <, >, or \.
84
• Erase: erase the selected memos.
Voice answer (Menu 8.6.2)
Use this menu to enable your phone to serve as
an answering machine. When you are unable to
answer incoming calls, your phone will answer
for you and record the caller’s message.
When the answering machine feature is
activated, you will be charged by your service
provider.
Activating the answering machine feature
From the Voice answer screen, select Settings
→ Activate → On.
Setting a greeting message
You can record your own greeting messages
and select the greeting to be used.
To record a greeting message:
1. From the Voice answer screen, select
Record greetings.
Checking messages
You can check received messages and delete
messages.
1. From the Voice answer screen, select Inbox.
2. Select the number or name you want. The
selected message plays.
From the message list, press <Options> to
access the following options:
Customising the answering machine
feature
You can change the settings for using the
answering machine feature.
From the Voice answer screen, select Settings.
The following options are available:
• Activate: activate or deactivate the
answering machine feature.
• Time: set the length of time the phone waits
before answering a call.
• Greet: select a greeting message for the
answering machine feature.
Utilities (Menu 8)
1. From the Voice answer screen, select
Settings → Greet.
2. Select the greeting message you want.
• Erase: erase the selected messages.
• File info: access the message properties.
Menu functions
2. Select a recording saving location. The
phone starts recording.
3. Record your greeting message.
4. When you have finished, press <Stop>.
5. Select Save.
6. Enter a name for the greeting and press
<Save>.
To select a greeting message:
85
Menu functions
Memo pad (Menu 8.7)
• Erase: erase the memo.
Use this menu to make memos of important
things you need to remember.
Calculator (Menu 8.8)
Writing a new memo
1. Press <New>.
2. Enter the memo text and press <Save> to
save the memo.
Viewing a memo
86
Select the memo you want to view from the
memo list.
While viewing a memo, press <Options> to
access the following options:
• Assign to Idle: set the memo to be
displayed on the idle screen.
• Skin: select the background colour of the
memo.
• Text Align: change the vertical and
horizontal alignment of the memo text.
Use this menu to use the phone as a calculator
or converter.
Calculator (Menu 8.8.1)
You can calculate numbers. The calculator
provides the basic arithmetic functions:
addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press [ ] to insert a decimal point and
[ ] to insert brackets.
• To change the sign of a number to a
negative (-), press <Options> and select
+/-.
2. Press one of the Navigation keys to access
the math function you want.
3. Enter the second number.
Unit conversion (Menu 8.8.2)
Use this menu for common conversions, such
as length and temperature.
1. Press <Options> and select a converter.
2. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press <Clear> to delete the entered
number.
Countdown (Menu 8.9)
Utilities (Menu 8)
• You can save a value into the calculator
memory by pressing <Options> and
selecting MS. To clear the saved value, select
MC.
• You can reset the calculator by pressing
<CE>.
3. Press [Left] or [Right] to select the original
unit and press [Down].
4. Press [Left] or [Right] to select the unit to
which you want to convert.
The equivalent value for the amount you
entered displays.
Menu functions
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue
the calculation.
This menu helps you measure how long it takes
you to do something or how many days remain
until a specific event occurs. The alarm for the
timer you set will sound at 9 AM on the
specified day.
Creating a countdown timer
1. Press <New>.
2. Enter the event for your countdown timer
and press <Select>.
87
Menu functions
3. Enter the date from which you want to count
down.
You can enter between 1981 and 2099 for
the year.
4. Set the alarm to On.
5. Press <Save> to save the timer.
Viewing a countdown timer
Select a timer from the countdown timer list.
While viewing a timer, press <Options> to
access the following options:
• Edit: edit the selected timer.
• Erase: erase the selected timer.
• Erase all: erase all timers.
Clock (Menu 8.0)
You can use your phone as a world time clock or
stopwatch.
88
World time (Menu 8.0.1)
Use this menu to find out the current time in
another part of the world.
Viewing world time
Scroll to the time zone you want to check.
Applying Daylight Saving Time (DST)
1. Scroll to the time zone to which you want to
apply the DST, press <DST>.
2. Press <Yes>.
Stop watch (Menu 8.0.2)
Use this menu to measure elapsed time. The
precision of the stopwatch is one onehundredth of a second.
1. Press <Start> to start the timer.
2. Press <Lap> to check an interval. You can
repeat this step for a total of 20 intervals.
3. When you have finished, press <Stop>.
4. To reset the stopwatch, press <Reset>.
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My Devices: search for connectable
Bluetooth devices.
• Disconnect: end the connection with the
connected devices.
• Visibility: allow other Bluetooth devices to
connect to your phone.
• My phone info: check your phone
information and assign a Bluetooth device
name to your phone, which is then displayed
on other devices.
• Services: select the Bluetooth services you
want to use.
HSP/HFP: connect the phone to a headset
or hands-free car kit.
• Your Bluetooth service does not support data
transmission.
• If there are obstacles between the phone and
the headset or hands-free car kit, the
maximum operating distance may be
reduced.
• Some devices, especially those that are not
tested or approved by SIG, may be
incompatible with your phone.
Utilities (Menu 8)
Setting up the Bluetooth feature
Use this menu to connect your phone to other
compatible devices wirelessly using Bluetooth
technology.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
Menu functions
Bluetooth (Menu 8. )
89
Menu functions
Dial up network: access the Internet on a
PC using the phone as a modem by
connecting the phone to a PC. To use this
service, you need an optional Bluetooth
dongle.
Searching for and connecting to a
Bluetooth device
1. From the Bluetooth menu, select My
Devices.
2. Press <Search>.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the kind of device:
•
Headset
•
Computer
•
Hands-free car kit
A blue icon indicates the currently connected
device.
3. Scroll to a device and press <Add>.
90
4. Enter a Bluetooth PIN and press <OK>. This
code is used just once and you do not need
to memorise it.
When the owner of the other device enters
the same code, pairing is complete.
Generally, Bluetooth headsets or hands-free
car kits have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must
enter the code.
5. Scroll to the added device and press
<Connect> to connect the phone with the
device.
Using device options
From the device list, press <Menu> to access
the following options:
• Device info: access detailed information
about the selected device.
• Services: display available Bluetooth
services.
• Delete: delete the device.
Settings
(Menu 9)
Security (Menu 9.1)
Lock mode (Menu 9.1.1)
Use this menu to lock your phone.
• Off: deactivate Lock mode.
• Once: lock the phone just one time. Once
the password is entered, the phone unlocks.
Settings (Menu 9)
Use this menu to protect your phone against
unauthorised use by managing the several
access codes of your phone and the card.
To access the Security menu, you must enter
the 4- digit lock code and press <Ok>. It is
preset to 0000 at the factory.
• On: lock the phone. Each time turning on
the phone, you need to enter the password
to use the phone.
In Lock mode, you cannot use the phone’s
menu function and dial numbers, except for
making an emergency call.
To unlock the phone, press one of the function
keys and enter the 4-digit lock code.
Menu functions
Many different features of your phone can be
customised to suit your preferences.
To access the menu, press <Menu> in Idle
mode and select Settings.
Change password (Menu 9.1.2)
Use this menu to change your current lock code
to a new one. The lock code is preset to 0000
at the factory.
1. Enter a new 4-digit lock code and press
<Ok>.
2. Enter the code again and press <Ok>.
91
Menu functions
Emergency # (Menu 9.1.3)
Voice privacy (Menu 9.1.4)
Your phone provides the option of storing three
emergency numbers. All of these numbers can
be manually dialled at any time, even if your
phone is locked or all outgoing calls are
restricted.
Storing an emergency number
Used only in digital networks, Voice Privacy
encrypts the voice channel so that people
cannot eavesdrop on your conversation.
• Standard: the phone uses a standard line
for calls.
• Enhanced: the phone makes and receives
calls on an encrypted high security line.
1. Select a location.
2. Press [ ] to clear the existing number.
3. Enter a number and press <Save> to save
the number.
120 will remain as emergency numbers, even if
you change them on the emergency number
list.
Making an emergency call in Lock mode
Enter one of the programmed emergency
numbers and press [ ].
92
This feature may not be available in all areas.
Contact your service provider for details and
availability.
Restriction (Menu 9.1.5)
Use this menu to restrict the use of your phone.
• Outgoing: restrict outgoing calls from your
phone, except emergency calls on standard
emergency numbers, such as 120 in
Emergency #.
• Incoming: restrict incoming calls.
• Contacts: restrict use of Contacts.
Use this menu to erase Contacts entries or
messages stored on the card’s memory and in
phone’s memory.
Reset phone (Menu 9.1.7)
Use this menu to restore the default settings of
all user-selectable options, or clear information
in the phone’s memory.
1. Select a reset option.
• Reset functions: restore the default
settings of all user-selectable options.
• Reset all: restores the default settings
for all options and clears all information,
Card setup (Menu 9.1.8)
Use this menu to access the security options for
the card.
• Pin check: activate the PIN check feature.
You must enter the PIN assigned to your
card each time you switch on the phone.
• Change PIN: change the PIN of your card
to a new one, provided that the PIN check
feature is enabled.
• UIM lock: set your phone to work with the
current card only
Settings (Menu 9)
1. Select Contacts or Messages.
2. Select the memory location you want to
clear.
3. Press <Yes> to confirm the clearing.
except for data stored in the User
memory and UIM card memory.
2. Press <Yes> to confirm the reset. The
phone reboots, turning itself off and then
back on, and returns to Idle mode.
Menu functions
Clear memory (Menu 9.1.6)
93
Input method (Menu 9.2)
Use this menu to select the default text input
mode.
Language/
(Menu 9.3)
Use this menu to change the language of the
display.
Domains preset (Menu 9.4)
You phone has domain name extensions that
you can retrieve when composing a message.
Use this menu to change default domain name
extensions and add new domain name
extensions, if necessary.
94
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Card is empty. Insert card”
• Be sure that the card is correctly installed.
“Enter PIN”
• You are using your phone for the first time.
You must enter the PIN supplied with the
UIM card.
• The PIN check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
check menu.
“No service,” “Network down,” or “Not
done” displays
• The network connection has been lost. You
may be in a weak signal area. Move and try
again.
• You are trying to access an option for which
you have no subscription with your service
provider. Contact the service provider for
further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not restricted
outgoing calls.
Solve problems
“Enter PUK”
• The PIN code was entered incorrectly three
times, and the UIM card is now blocked.
Enter the PUK supplied by your service
provider.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one second.)
• Be sure that you are accessing the correct
cellular network.
• Be sure that you have not restricted
incoming calls.
Your correspondent cannot hear you
speaking
• Be sure that you have switched off the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
95
Solve problems
The phone starts beeping and display “Low
battery warning!”
• Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates
the signal strength from strong (
) to
weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
• Use the Find menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
96
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean soft
cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety information
Exposure to Radio Frequency (RF)
Signals
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on the
safety standards that were developed by
independent scientific organizations through
periodic and through evaluation of scientific
studies.
The standards include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
set by the FCC is 1.6W/kg1.
SAR tests are conducted using standard
operating positions specified by the FCC with
the phone transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
1 In the U.S. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account
for any variations in measurements.
97
Health and safety information
designed to operate at multiple power levels so
as to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the
power output of the phone.
Before a new model phone is available for sale
to the public, it must be tested and certified to
the FCC that it does not exceed the limit
established by the government-adopted
requirement for safe exposure. The tests are
performed in positions and locations (e.g., at
the ear and worn on the body) as required by
the FCC for each model. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR
98
information on this model phone is on file with
the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid
after searching on FCC ID printed in the label
on the phone.
For Body Operation
• For body worn operation, this model phone
has been tested and meets the FCC RF
exposure guidelines when used with a
Samsung-supplied or approved accessory
designated for this product or when used
with an accessory that contains no metal and
that positions the handset a minimum from
the body.
• The minimum distance from the body for this
model phone is written in the FCC
certification information.
• Non compliance with the above conditions
may violate FCC RF exposure guidelines.
Battery safety
Standby time will be reduced in the following
conditions:
• When you use the additional features on
your phone such as writing and storing
messages, playing games, connecting to the
Internet, and so on.
• If you are frequently out of the service area.
• If you are out of the service area for a long
period of time.
• If you use the phone out of the network’s
local service area.
• If you use the talk mode repeatedly
The battery can be charged and discharged
hundreds of times, but it will eventually wear
out. When the operation time for both talk
mode and standby mode is reduced by about
half, it is time to buy a new battery.
Health and safety information
• For more Information concerning exposure
to radio frequency signals, see the following
websites:
• Federal Communications Commission (FCC)
http://www.fcc.gov/oet/rfsafety
• Cellular Telecommunications Industry
Association (CTIA): http://www.wowcom.com
• U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
• World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions when using batteries
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended
purpose.
99
Health and safety information
• If you use the phone near the network’s
base station, it uses less power; talk and
standby time are greatly affected by the
signal strength on the cellular network and
the parameters set by the network operator.
• Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The battery
can be charged and discharged hundreds of
times, but it will gradually wear out. When
the operation time (talk time and standby
time) is noticeably shorter than normal, it is
time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
100
for more than a week, since overcharging
may shorten its life.
• Extreme temperature will affect the charging
capacity of your battery: it may require
cooling or warming first.
• Do not leave the battery in hot or cold
places, such as in a car in summer or winter
conditions, as you will reduce the capacity
and lifetime of the battery. Always try to
keep the battery at room temperature. A
phone with a hot or cold battery may
temporarily not work, even when the battery
is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not short-circuit the battery. Accidental
short- circuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery), for
example when you carry a spare battery in a
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you
are following the special regulations in a given
area or country.
Operating environment
Health and safety information
pocket or bag. Short-circuiting the terminals
may damage the battery or the object
causing the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Remember to follow any special regulations in
force in any area and always switch your phone
off whenever it is forbidden to use it, or when it
may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for
detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the
normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
101
Health and safety information
certain electronic equipment may not be
shielded against the RF signals from your
wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15
cm (6 inches) from their pacemaker when
the phone is switched on
• Should not carry the phone in a breast
pocket
102
• Should use the ear opposite the pacemaker
to minimize potential interference
If you have any reason to suspect that
interference is taking place, switch your phone
off immediately.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information.
Switch your phone off in health care facilities
when any regulations posted in these areas
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle. You
should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch your phone off in any facility where
posted notices require you to do so.
Potentially explosive atmospheres
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants
or where blasting operations are in progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane
or butane), areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
Health and safety information
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
103
Health and safety information
Emergency calls
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks as well as user-programmed
functions, which cannot guarantee connection
in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for
example).
Remember, to make or receive any calls the
phone must be switched on and in a service
area with adequate signal strength. Emergency
calls may not be possible on all wireless phone
networks or when certain network services and/
or phone features are in use. Check with local
service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
104
2. Key in the emergency number for your
present location (for example, 120 or any
other official emergency number).
Emergency numbers vary by location.
3. Press [ ].
If certain features are in use (call barring, for
example), you may first need to deactivate
those features before you can make an
emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene
of an accident; do not cut off the call until given
permission to do so.
Other important safety information
improperly installed and the air bag inflates,
serious injury could result.
Switch your phone off before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and is illegal.
Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep your phone and all its parts and
accessories out of the reach of small children
and pets. They may accidentally damage
these things or choke on small parts.
105
Health and safety information
Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases
or explosive materials in the same
compartment as the phone, its parts or
accessories.
For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
Health and safety information
• Keep the phone dry. Precipitation, humidity
and liquids contain minerals will corrode
electronic circuits.
• Do not touch the phone with a wet hand
while it is charging. Doing so may cause an
electric shock to you or damage to the
phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperature can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
106
• Do not drop, knock or shake the phone.
Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning
solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating
devices, such as a microwave oven, a stove
or a radiator. The phone may explode when
overheated.
• When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case, phone
repairs are no longer guaranteed by the
Health and safety information
manufacturer's warranty, even if the
warranty for your phone has not expired.
• If your phone has a flash or light, do not use
it too close to the eyes of people or animals.
This may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorized
antennas or modified accessories may
damage the phone and violate regulations
governing radio devices.
• If the phone, battery, charger or any
accessory is not working properly, take it to
your nearest qualified service facility. The
personnel there will assist you, and if
necessary, arrange for service.
Licensed by QUALCOMM incorporated under one or
more of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
107
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations in
this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-12192A
English. 09/2006. Rev. 1.0