WD0704CQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
WD0702CQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
WD0704DQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
WD0702DQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
WD0704HQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
WD0702HQ(A/C/D/F/G/H/Q/R/S/T/V/W/Z)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/register
WD0704CQ-02908C_EN(XSP).indd 1
2010-5-26 10:08:26
features of your new samsung
washing machine
Your new washing machine will change the way you feel about doing laundry. From
its super-size capacity to its energy efficiency, the Samsung washing machine has
all the features to turn a mundane chore into a pleasure.
• Silver Wash - Silver Wash Health System
The winning combination! Samsung’s silver technology combines the sanitizing effect of silver
with state-of-the-art science for the ultimate in clean. Two plates of pure silver are converted
into silver ions through electrolysis. Even in cold, bleach-less water, the silver particles remove
of odor causing bacteria for a “super clean” wash. So washing in cold water is energy efficient
and better for your clothes.
The Silver plates carry a warranty of ten years for 2 times run a week and can easily be
replaced by a Service Technician if needed.
• Washing to drying with one button
Enjoy convenient non stop washing and drying managing. 3 different special drying programs
can be selected to perform the whole wash cycle including the drying cycle using one button.
•
Cup Board(standard program), Iron,Time Drying (30min ~ 180mins).
Those drying programs also can be operated independently of washing programs.
• Child Lock
The Child Lock function ensures that curious little hands are kept out of your washing
machine.
This safety feature stops your children from playing with the operation of the washing
machine, and alerts you when it is activated.
• Wool Certified
The machine has been tested and passed the required Woolmark Company specification for
machine washable wool products.
Fabrics should be washed according to the instructions on the garment label as specified by
Woolmark and Samsung.
• Delay End
Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of
using your washing machine especially when you have to go out.
• Delicates Program
Special care can be determined by the appropriate temperature, the gentle wash action and
the appropriate amount of water.
• Ceramic Heater for Durability & Energy Saving (selected models)
Our truly innovative Ceramic Heater is twice as durable as regular heaters.
That saves you money on repairs. Plus, it eliminates the scale of hard water and save energy.
2_ features
WD0704CQ-02908C_EN(XSP).indd 2
2010-5-26 10:08:26
• Air Wash
The Air Wash system deodorizes unpleasant smells and sterilizes the laundry that cannot
be eliminated through a conventional washing system, a benefit of its unique air-washing
mechanism.
• Air-washable : Woolen coats, cotton/down jumpers, sweaters, suits, pillows, cushions,
needlework dolls
• Not applicable : leather, silk, velvet, electric blankets, other stained laundry
• Digital Graphic Display
The Digital Graphic Display control panel is clear and easy to use for minimum fuss and
hassle. And while it is easy to operate, the Digital Graphic Display enables you to make quick
and accurate adjustments to your wash for excellent washing results.
• Wide door
Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for
large sized laundry items such as bedding, towels etc.
• Direct Drive Motor
As the drum does not utilize belts or gears, vibrations are reduced significantly. This feature
ensures that your washer machine is quieter and more durable.
This manual contains important information on the installation, use, and care of your new
Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how
to use the washing machine, and tips for making the most of its state-of-the-art features and
functions. The “Troubleshooting and information codes” section on page 34 tells you what to
do if something goes wrong with your new washing machine.
features _3
WD0704CQ-02908C_EN(XSP).indd 3
2010-5-26 10:08:26
safety information
Congratulations on your new Samsung ActivFresh™ washer. This manual contains
important information on the installation, use and care of your appliance. Please
take time to read this manual to take full advantage of your washer’s many benefits
and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the
extensive features and functions of your new appliance and retain it at a safe place near the appliance
for your future reference. Use this appliance only for its intended purpose as described in this instruction
manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer
may differ slightly from those described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact your nearest service center or find help and information online at
www.samsung.com.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury,
death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.
4_ safety information
WD0704CQ-02908C_EN(XSP).indd 4
2010-5-26 10:08:28
Do not let children (or pets) play on or in your washing machine. The washing machine door does not
open easily from the inside, and children may be seriously injured if trapped inside.
WARNING
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
This appliance should be positioned to be accessible to the power plug, the water supply tabs and the
drain pipes.
For washing machines with ventilation openings in the base, ensure that the opening is not obstructed
by carpet or any other obstacles.
Use the new hose-sets and old hose-sets should not be reused.
safety information _5
WD0704CQ-02908C_EN(XSP).indd 5
2010-5-26 10:08:28
safety information
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service
company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220V/50Hz/15A wall socket or higher and use the socket
for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Failure Plug
the power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
6_ safety information
WD0704CQ-02908C_EN(XSP).indd 6
2010-5-26 10:08:28
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the
product.
WARNING
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, cut the water supply and power immediately and contact your
nearest service centre.
- Do not tough the power plug with wet hands
- Failure to do so may cause electric shock
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance,
remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
safety information _7
WD0704CQ-02908C_EN(XSP).indd 7
2010-5-26 10:08:29
safety information
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb
in the appliance
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service
centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug
and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
When the water supply hose comes loose from the faucet and floods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
8_ safety information
WD0704CQ-02908C_EN(XSP).indd 8
2010-5-26 10:08:29
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the faucet
slowly.
Open the faucet slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the faucet is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).
- If the door is not closed completely, it may result in water leakage.
Open the faucet and check if the water supply hose connector is firmly tightened and that
there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water
leakage.
To reduce the risk of fire or explosion:
- Under certain conditions, hydrogen gas may be produced in a hot water system such
as your hot water heater that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or
more, turn on all hot water taps in your home, and let the water flow for several minutes
before using your washing machine. This will release any hydrogen gas build–up. Since
hydrogen gas is flammable, do not smoke or light an open flame during this time.
Ventilate immediately without touching the power plug if there is a gas leak.
safety information _9
WD0704CQ-02908C_EN(XSP).indd 9
2010-5-26 10:08:29
safety information
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a
special program for washing these items.
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
* Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device.Do
not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
- This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
10_ safety information
WD0704CQ-02908C_EN(XSP).indd 10
2010-5-26 10:08:29
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the
product, discoloration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
safety information _11
WD0704CQ-02908C_EN(XSP).indd 11
2010-5-26 10:08:29
contents
SETTING UP YOUR WASHING
MACHINE
13
14
14
14
15
15
15
15
15
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
WASHING A LOAD OF LAUNDRY
21
21
22
24
24
25
25
26
27
27
28
28
29
29
30
Washing for the first time
Basic instructions
Using the control panel
Child lock
Sound off
Delay end
Air Wash
Using dry course
Auto Dry Mode
Washing clothes using the cycle selector
Washing clothes manually
Laundry guidelines
Detergent and additives information
Which detergent to use
Detergent drawer
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
31
31
32
33
34
34
34
Draining the washing machine in an emergency
Cleaning the exterior
Cleaning the detergent drawer and drawer
recess
Cleaning the debris filter
Cleaning the water hose mesh filter
Repairing a frozen washing machine
Storing your washing machine
TROUBLESHOOTING AND
INFORMATION CODES
35
36
Check these points if your washing machine...
Information codes
CYCLE CHART
37
Cycle chart
APPENDIX
38
38
38
39
Fabric care chart
Protecting the environment
Declaration of conformity
Specifications
13
21
31
35
37
38
12_ contents
WD0704CQ-02908C_EN(XSP).indd 12
2010-5-26 10:08:29
setting up your washing
machine
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Release lever
01 SETTING UP
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
Work top
Detergent drawer
Control panel
Plug
Door
Drain hose
Debris filter
Adjustable feet
Tub
Emergency drain tube
Filter Cover
Spanner
* Bolt hole covers
Water supply
hose
Cap fixer
Hose guide
* Bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).
setting up your new washing machine _13
WD0704CQ-02908C_EN(XSP).indd 13
2010-5-26 10:08:31
setting up your washing
machine
MEETING INSTALLATION REQUIREMENTS
Electrical supply and grounding
To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.
WARNING
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• 220V~240V 50Hz 15 AMP fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 4 feet (122cm) of the back of your washing machine for the
provided inlet hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
14_ setting up your new washing machine
WD0704CQ-02908C_EN(XSP).indd 14
2010-5-26 10:08:31
Drain
Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached at the factory.
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
01 SETTING UP
Flooring
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 51 mm
Top – 25 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 32 ˚F or 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
setting up your new washing machine _15
WD0704CQ-02908C_EN(XSP).indd 15
2010-5-26 10:08:31
setting up your washing
machine
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
16_ setting up your new washing machine
WD0704CQ-02908C_EN(XSP).indd 16
2010-5-26 10:08:32
STEP 3
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
01 SETTING UP
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
leveling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected
to the washing machine at one end and to
the water tap at the other. Do not stretch the
water supply hose. If the hose is too short,
replace the hose with a longer, high pressure
hose.
2. Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
setting up your new washing machine _17
WD0704CQ-02908C_EN(XSP).indd 17
2010-5-26 10:08:33
setting up your washing
machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
18_ setting up your new washing machine
WD0704CQ-02908C_EN(XSP).indd 18
2010-5-26 10:08:34
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
•
✗
✗
01 SETTING UP
WARNING
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
setting up your new washing machine _19
WD0704CQ-02908C_EN(XSP).indd 19
2010-5-26 10:08:35
setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.
60 ~ 90 cm
Drain hose
Hose guide
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
60 ~ 90 cm
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, a 230 volt 50 Hz approved electrical outlet protected by
a 15-amp fuse or comparable circuit breaker. (For more information on electrical and grounding
requirements, see page 14.)
20_ setting up your new washing machine
WD0704CQ-02908C_EN(XSP).indd 20
2010-5-26 10:08:36
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”)
02 WASHING A LOAD OF LAUNDRY
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 28.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not wash water-proofed items.
2.
3.
4.
5.
Close the door until it latches.
Turn the power on.
Add detergent and additives to the dispenser drawer.
Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
washing a load of laundry _21
WD0704CQ-02908C_EN(XSP).indd 21
2010-5-26 10:08:39
washing a load of laundry
USING THE CONTROL PANEL
1
1
2
2
3
4
1
5
6
7
8
9
10
11
12
DIGITAL GRAPHIC
DISPLAY
Displays the remaining wash cycle time, all cycle information, and error
messages.
CYCLE SELECTOR
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector”. (see page 27)
Cotton - For averagely or lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
Eco - Use for everyday items such as underwear and shirts.
Intensive - Select this pattern when the laundry is heavily soiled and
needs to be washed intensively.
Delicates - For sheer fabrics, brassieres, lingerie, dresses, shirts and
blouses. For best results, use liquid detergent.
Sports Wear - Use for water-proofed or proofed garments to keep their
good looks and fresh feel.
Wool - Only for machine-washable wool. A load should be less than 2.0 kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved
washing results and for improved care of the wool fibers.
The wool wash cycle of this machine has been approved by
Woolmark for the washing of machine-washable Woolmark
products provided that the products are washed according
to the instructions on the garment label and those issued by
the manufacturer of this washing machine, M1010 (Certificate
Number issued by IWS NOM INEE Co., Ltd.)
Drying - Select to dry laundry automatically by detecting the amount and
weight of the laundry.
Air Wash - This course is useful for removing bad odors. Turning the Cycle
Selector cycles through the following operating modes.
(Deodorization  Sanitization)
• Deodorization - Reduces bad smells from the laundry
• Sanitization - Deodorize and sterilize the laundry by stronger air
wash action with higher temp.
22_ washing a load of laundry
WD0704CQ-02908C_EN(XSP).indd 22
2010-5-26 10:08:39
Drum Clean Tips:
The drum must be keep clean all the time. After long time using, many
kinds of bacteria from water and air would adhere to the drum in the form
of besmirch, which does harm to your family’s health. So please use the
Drum Clean function once every one to three months, to keep the drum
always under a clean and healthful condition for using.
3
PREWASH
SELECTION BUTTON
Press this button to select pre-wash.
4
DELAY START END
SELECTION BUTTON
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be finished.
5
TEMP.
SELECTION BUTTON
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
6
RINSE SELECTION
BUTTON
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
02 WASHING A LOAD OF LAUNDRY
Wash - It’s used to wash clothes not heavily stained.
Rinse - Use for a load that needs rinsing only or to add rinseadded fabric
softener to a load.
Spin - Performs an additional spin cycle to remove more water.
Drain - Just drain the water from washing machine without spinning.
Drum Clean - To keep the drum clean, a sanitization is needed at least
every one to three months.
• The default wash temperature is 60 ˚C.
• The default spin speed is the maximum speed.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
7
8
SPIN SELECTION
BUTTON
DRYING MODE
BUTTON
WD0704
,
, 400, 800, 1200, 1400 rpm
WD0702
,
, 400, 800, 1000, 1200 rpm
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
“Rinse Hold
” -The laundry remains soaking in the final rinse water. Before
the laundry can be unloaded, either a Drain or Spin cycle must be performed.
Pressing the button cycles through the following options.
Cup Board
→ Iron
→ Time Dry
(30min. →1:00min. → 1:30min.
→ 2:00min. → 2:30min. → 3:00min.) → Cup Board
“Cup Board ” - Use this cycle to dry loads such as cotton, underwear,
and linen.
“Iron
” - Finishes the dry cycle in a moist state appropriate for Ironing.
“Time Dry
” -Dry the laundry for the specified period of time.
• You must avoid washing laundry that may not be dried as it may
be deformed even at low temperatures.
• The Cup Board, Iron and Time Dry options detect the weight of
the laundry in order to display an accurate drying time and dry
them more completely.
• The drying conditions may differ depending on the type and the
amount of laundry.
washing a load of laundry _23
WD0704CQ-02908C_EN(XSP).indd 23
2010-5-26 10:08:41
washing a load of laundry
9
EXPRESS WASH
SELECTION BUTTON
Press this button to select Exprss Wash.Exprss Wash is only available
with cotton course.
Press this button repeatedly to cycle through the wash time options:(15,
20,30,40,50,60min).
• The actual operation time of Express Wash may delay at most 10
minutes according to weight of the laundry.
10
SILVER WASH
SELECTION BUTTON
Silver Wash water is supplied during the wash cycle as well as during
the last rinse cycle, removing bacteria as well as giving protection from
bacterial growth for up to one month.
11
START/PAUSE
SELECTION BUTTON
Press to pause and restart a cycle.
12
POWER BUTTON
Press it once to turn your washing machine on, press it again to turn your
washing machine off. If the washing machine is left on for more than 10
minutes without any buttons being touched, the power automatically turns off.
Child lock
The Child Lock function allows you to lock the buttons so that
the wash cycle you’ve chosen can’t be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function,
press the Temp. and Rinse buttons at the same time for
3 seconds. “Child Lock ” will be lit when this feature is
activated.
When the Child Lock function is activated, only the
Power button works. The Child Lock function remains
on even after the power is turned on and off or after the
disconnecting and reconnecting the power cord.
3 SEC.
Sound off
The Sound Off function can be selected during all courses.
When this function is selected, sound is turned off for all
courses. Even if the power is turned on and off repeatedly, the
setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function,
press the Spin and Drying buttons at the same time for 3
seconds. The “Sound Off ” will be lit when this feature is
activated.
3 SEC.
24_ washing a load of laundry
WD0704CQ-02908C_EN(XSP).indd 24
2010-5-26 10:08:44
Delay end
Air Wash
Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing
that can be refreshed includes woolen coats, cotton or jumpers, sweaters and suits. (Two items
or less (less than 1 kg)
1. Open the door, place the laundry into the washing machine and close the door.
2. Press the Power button.
3. Select Air Wash by turning the Cycle Selector.
• Each time the button is pressed, the operating mode cycles through the following
sequence: Deodorization, Sanitization ...
MODE
CYCLE TIME
Deodorization
29 min
Sanitization
59 min
02 WASHING A LOAD OF LAUNDRY
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
When one of these options has been selected, no other button can be selected and you
can only select the delay end time from between 3:00 – 19:00.
4. Close the door and press the Start/Pause button.
•
• When there is water in the tub, Air Wash cannot be selected. Drain the water and select
Air Wash.
• Press the Start/Pause or Power button to remove the laundry.
• Fragrance or dryer sheets can be used with Air Wash programs to add fragrance to your
refreshed laundry (one sheet per one or two items).
Avoid Air Wash the following clothes:
• Sensitive clothes made of leather, mink, fur, silk, etc.
• Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits may have their
decorations loosened.
• Clothes trimmed with buttons can cause them to break.
• Starchy clothes can become deformed.
• Hard bedding such as a wooden pillows (neck-rest)
- Pillows or blankets filled with plastic or starch rather than cotton
- Electric blankets
• Furry blankets
• Bulky blankets
• Latex pillow
washing a load of laundry _25
WD0704CQ-02908C_EN(XSP).indd 25
2010-5-26 10:08:46
washing a load of laundry
USING DRY COURSE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line
for the dried clothe of 4.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button and then press the Drying button.
: The standard course will be selected automatically.
Drying is availably selected only at the courses such as Cotton, Eco, Intensive, Sports Wear,
Wash, Rinse and Spin.
3. Select Drying button as follows.
Drying Programs
• Every press of this button will select drying type repeatedly in the following order:
Cup Board
→ Iron
→ Time Dry
(30min. →1:00min. → 1:30min. → 2:00min. →
2:30min. → 3:00min.) → Cup Board
Drying Type
Auto Drying
Cup Board(
Iron(
Time Drying(
)
)
)
Information
Max
Load
Time
(Max Load)
Standard: Dries the laundry.
3.5 kg
160 min.
For leaving items partially damp
so that it can be easily ironed
2.0 kg
140 min.
You can select the appropriate
drying time depending on the
texture, quantity, and moisture.
4.0 kg
180 min.
• It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
• For laundry weighing less than 3.5kg, use the Auto Dry. For laundry that weighs more,
please use the Time Dry.
• If both the spin and drying cycles are selected, the spin speed is automatically selected
to enhance the drying efficiency.
• When using the drying cycle, check if the water supply valve is opened.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it again.
5. Press Start/Pause button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If you select Drying function, the intensity of SPIN will be set up as High in default for
increasing the drying effect.
• If cold water is not supplied, drying will not be performed.
• If you do not take out clothes from the tub after the end of drying, a function of wrinkle
protection will be performed for about 30 minutes with the display of [End]. In order to
take out the clothes: press firstly Start/Pause or Power button and take them out.
• In case you wish to dry after hand washing, select both Spin and Dry at the same time.
26_ washing a load of laundry
WD0704CQ-02908C_EN(XSP).indd 26
2010-5-26 10:08:46
Auto Dry Mode
Samsung’s brand-new technology, outstanding Auto Dry can apperceive the condition of your
drying clothes, and decide automatically when to stop, bringing convienence to your life.
both use Auto Dry technology, and will automatically stop
• Just in Time: At the very time when your clothes are dry, the machine apperceives it and
stops drying, preventing damage to clothes caused by over-drying. The drying time will
be adjusted accordingly during the course.
• For example, if the machine apperceives clothes are dry 50min after the 160min course
of Cup Board starts, it will stop drying right away and start cooling course,with the
display showing 10min instead of 110min. After cooling, the display shows End and the
whole course ends.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
02 WASHING A LOAD OF LAUNDRY
Cup Board
and Iron
drying “Just in Time”.
Pre-wash is only available when selecting the Cotton, Eco, Intensive, Delicates, Sports
Wear, Wash, Drum Clean cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Eco, Intensive, Delicates, Sports Wear, Wool, Wash, Rinse, Spin, Drain. The relevant
indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
washing a load of laundry _27
WD0704CQ-02908C_EN(XSP).indd 27
2010-5-26 10:08:47
washing a load of laundry
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing
machine. (
: No Spin,
: Rinse Hold)
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new woollen
items, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric
care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects,
such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash
clothing with large buckles, buttons, or other heavy metal objects. Metal on clothing may damage
your clothing as well as the tub. Turn clothing with buttons and embroidered clothes inside out before
washing them. If zips of pants and jackets are open while washing, the spin basket may be damaged.
Zips should be closed and fixed with a string before washing. Clothing with long strings may become
entangled with other clothes damaging them. Be sure to fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart
below to determine the load capacity for the type of laundry you are washing.
28_ washing a load of laundry
WD0704CQ-02908C_EN(XSP).indd 28
2010-5-26 10:08:47
Fabric Type
Load Capacity
Model
WD0704 / WD0702
7.5 kg
Synthetics
3.0 kg
Sports Wear
2.5 kg
Delicates
2.5 kg
Wool
2.0 kg
02 WASHING A LOAD OF LAUNDRY
Cotton
- average/lightly soiled
- heavily soiled
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Duvets, the wash time may be lengthened or the spin
efficiency may be degraded.
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material
and damage the laundry. Therefore make sure to place them inside
a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
Do not wash the laundry net by itself without other laundry. This may
cause
abnormal vibrations that could move the washing machine and
CAUTION
cause an accident resulting in injury.
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate
items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
Please note the following when using the Wool course.
• Use a neutral liquid detergent for wool only.
• When using a powder detergent, it may remain on the laundry and cause damage to the
material (wool).
washing a load of laundry _29
WD0704CQ-02908C_EN(XSP).indd 29
2010-5-26 10:08:47
washing a load of laundry
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do NOT open the detergent drawer when your washing machine is running.
1. Pull out the detergent drawer on the left side of the control panel.
2. Add the recommended amount of laundry detergent
before starting
directly into the detergent compartment
your washing machine.
3. Add the recommended amount of fabric softener into the
softener compartment
if required.
Do NOT add any powder/liquid detergent to the softener
compartment ( ).
CAUTION
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash compartment
.
When washing large items do NOT use the following
detergetnt types.
• Tablet and capsule type detergents
• Detergents using a ball and net
MAX
Concentrated or thick fabric softener and conditioner
must be diluted with a little water before being poured
into the dispenser (prevents the overflow from becoming
blocked).
Be careful that the fabric softener does not overflow, when you close the detergent drawer
after adding fabric softener into the rinse detergent compartment.
30_ washing a load of laundry
WD0704CQ-02908C_EN(XSP).indd 30
2010-5-26 10:08:48
cleaning and maintaining your
washing machine
Keeping your washing machine clean improves its performance, wards off
unnecessary repairs, and lengthens its life.
1. Unplug the washing machine from the power supply.
2. Open the filter cover using a coin or a key.
Filter cover
03 CLEANING AND MAINTAINING
DRAINING THE WASHING MACHINE IN AN EMERGENCY
3. Unscrew the emergency drain cap by turning it to the left.
Emergency
drain cap
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
Emergency
drain tube
Remain water maybe more than you expected. Prepare
larger bowl.
6. Reinsert the drain tube and screw the cap back on.
7. Replace the filter-cover.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a
nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
cleaning and maintaining your washing machine _31
WD0704CQ-02908C_EN(XSP).indd 31
2010-5-26 10:08:49
cleaning and maintaining your
washing machine
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS
1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Remove the liquid detergent divider from the
detergent drawer
Release lever
Liquid detergent divider
3. Wash all parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Replace the liquid detergent divider by pushing it firmly into
the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.
32_ cleaning and maintaining your washing machine
WD0704CQ-02908C_EN(XSP).indd 32
2010-5-26 10:08:49
cleaning and maintaining your
washing machine
CLEANING THE DEBRIS FILTER
CAUTION
Before cleaning the debris filter, make sure to unplug the power cord.
1. Remove the remaining water first (refer to “Draining the
washing machine in an emergency” on page 29.)
If you separate the filter without draining the remaining
water, the remaining water may trickle out.
2. Open the filter cover by using a key or coin.
3. Unscrew the emergency drain cap by turning it to the left
and drain off all the water.
4. Unscrew the debris filter cap.
Debris filter cap
5. Wash any dirt or other material from the debris filter. Make
sure the drain pump propeller behind the debris filter is not
blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
CAUTION
03 CLEANING AND MAINTAINING
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is
displayed. (Refer to “Draining the washing machine in an emergency” in the previous page.)
Do not open the debris filter cap while the machine is running or hot
water may flow out.
•
Make sure to replace the filter cap after the filter cleaning. If the filter is out of the machine, your
washing machine may malfunction or leak water.
•
The filter should be fully assembled after the filter cleaning.
cleaning and maintaining your washing machine _33
WD0704CQ-02908C_EN(XSP).indd 33
2010-5-26 10:08:50
cleaning and maintaining your
washing machine
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1.
2.
3.
4.
5.
Unplug the washing machine.
Pour warm water over the tap to loosen the water supply hose.
Remove the water supply hose and soak it in warm water.
Pour warm water into the washing machine drum and let it sit for 10 minutes.
Reconnect the water supply hose to the water tap and check if the water supply and drain
are operating normal.
STORING YOUR WASHING MACHINE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Quick 29’ cycle and add bleach to the bleach compartment. Run your washing
machine through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine
door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any
leftover water in your washing machine to thaw out before using it.
34_ cleaning and maintaining your washing machine
WD0704CQ-02908C_EN(XSP).indd 34
2010-5-26 10:08:51
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
SOLUTION
Will not start
•
•
•
•
Make sure your washing machine is plugged in.
Make sure the door is firmly closed.
Make sure the water source tap(s) are turned on.
Make sure to press the Start/Pause button.
Has no water or not enough
water
•
•
•
•
Turn the water tap on fully.
Make sure the water source hose is not frozen.
Straighten the water intake hoses.
Clean the filter on the water intake hose.
Has detergent remains in
the detergent drawer after
the wash cycle is complete
•
Make sure your washing machine is running with sufficient water
pressure.
Make sure the detergent is added to the center of the detergent
drawer.
Vibrates or is too noisy
•
•
04 TROUBLESHOOTING
PROBLEM
•
•
•
Make sure your washing machine is on a level surface. If the surface
is not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does
not drain and/or spin
•
•
Straighten the drain hose. Eliminate kinked hoses.
Make sure the debris filter is not clogged.
Door is locked shut or will
not open.
•
The door will not open until 3 minutes after the machine stops or the
power turns off.
If the problem persists, contact your local Samsung Customer Service.
troubleshooting and information codes _35
WD0704CQ-02908C_EN(XSP).indd 35
2010-5-26 10:08:51
troubleshooting and
information codes
INFORMATION CODES
When your washing machine malfunctions, you may see an information code on the display. If that
happens, check this table and try the suggested solution before calling Customer Service.
CODE SYMBOL
SOLUTION
dE
•
Close the door.
4E
•
•
Make sure the source water tap is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of jeans, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
•
It appears when the internal temperature of the drum is high.
The fan will automatically function, so just wait until “Hot” indication
disappeared.
•
This occurs when too much foaming is detected. It is also displayed
while foaming is removed. When the removal is finished, the normal
cycle proceeds.(This is one of the normal operations. It is an error for
preventing non-sensing faults.)
•
If the voltage of the supplied power is instable, the washing machine
will be paused to protect its electric devices.
If the correct voltage is supplied, the cycle will resume automatically.
UE
cE/3E
Hot
Sd/Sud
Uc
•
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
36_ troubleshooting and information codes
WD0704CQ-02908C_EN(XSP).indd 36
2010-5-26 10:08:51
cycle chart
CYCLE CHART
( user option)
Max load(kg)
DETERGENT
Max Temp
(˚C)


95


30
WD0704/
WD0702
Pre-wash
wash
Softener
Cotton
7.5

yes
Eco
3.0

yes
Intensive
7.5

yes


95
Delicates
2.5

yes


30
Sports Wear
3.0

yes


60
Wool
2.0
-
yes
-

40
Dry
4.0
-
-
-
-
-
Deodorization
1.0
-
-
-
-
-
Sanitization
1.0
-
-
-
-
-
Wash
3.0

yes


40
Drum Clean
-


-

60
Spin Speed(MAX) rpm
PROGRAM
Delay end
Cycle time
(min)
1200

77
1200

56
WD0704
WD0702
Cotton
1400
Eco
1400
Intensive
1400
1200

193
Delicates
800
800

50
Sports Wear
1400
1200

72
Wool
800
800

38
Dry
-
-

160
Deodorization
-
-

29
Sanitization
-
-

59
Wash
1400
1200

34
Drum Clean
1400
1200

76
05 CYCLE CHART
Silver wash
PROGRAM
1. A cycle with a prewash takes approx. 15 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN
60456.
3. Intensive 60˚C are programs according to EN60456.
4. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
5. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
cycle chart _37
WD0704CQ-02908C_EN(XSP).indd 37
2010-5-26 10:08:51
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing, and dry cleaning when necessary.
The use of symbols ensures consistency among garment manufacturers of domestic and imported items.
Follow the care label directions to maximize garment life and reduce laundering problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
DECLARATION OF CONFORMITY
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
38_ appendix
WD0704CQ-02908C_EN(XSP).indd 38
2010-5-26 10:08:55
SPECIFICATIONS
TYPE
FRONT LOADING WASHING MACHINE
WD0704/WD0702
06 APPENDIX
DIMENSIONS
W598mm X D610mm X H845mm
50 kPa ~ 800 kPa
WATER PRESSURE
WATER VOLUME
73 ℓ
WD0704
NET WEIGHT
65 kg
WASH AND SPIN CAPACITY
7.5 kg [DRY LAUNDRY]
DRY CAPACITY
4 kg
MODEL
220 V
150 W
240 V
150 W
220 V
2000 W
240 V
2400 W
220 V
1460 W
240 V
1740 W
MODEL
WD0704
WD0702
230 V
350 W
250 W
WASHING
WASH AND
HEATING
POWER CONSUMPTION
DRYING
SPIN
PACKAGE WEIGHT
SPIN REVOLUTIONS
WD0704/WD0702
PUMPING
34 W
MODEL
WD0704/WD0702
PAPER
2.5 kg
PLASTIC
1.0 kg
MODEL
WD0704
WD0702
rpm
1400
1200
The appearance and specifications of the product are subject to change without prior notice for purposes
of product enhancement.
appendix _39
WD0704CQ-02908C_EN(XSP).indd 39
2010-5-26 10:08:55
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
Code No. DC68-02908C_EN
WD0704CQ-02908C_EN(XSP).indd 40
2010-5-26 10:08:55