Samsung CS-21Z30ML User Manual

AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 1
COLOR TELEVISION
Connection Panel (depending on the model)
➢
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
Rear Panel
Audio input
Register your product at
www.samsung.com/global/register
Video input
or
Control Panel (depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1
2
3
4
5
6
Cable television
network
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Indicator
Power on/off
◆ You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
◆ The 2 and 3 buttons also have the same function as the
œ/√/†/… buttons on the remote control.
◆ Use the 3 buttons to select an external source when you
have no remote control. External sources are located prior
to the saved channels (except channel 0). Power on/off
also can return to TV mode from external input mode.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Headphone jack
☛
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA3 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)
The RCA4 connectors are used for equipment such as a
DVD with component output.
English - 1
AA68-03872A-02
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 2
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
Switching the Television On and Off
4
5
6
7
8
9
0
!
/
Used to increase or
decrease the volume.
MENU
Used to display the onscreen menu or return to
the previous menu.
…/†/œ/√
Used to control the
cursor in the menu.
DUAL I-II (option)
Used to realize the
bilingual function,
selecting the different
playing languages.
SOURCE
Used to display all of the
available video sources.
INFO
Used to view the
channel information and
setting status you
selected.
PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
P /
Used to display the next
or previous stored
channel.
@ EXIT
Used to exit from any
display or return to
normal viewing.
# MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
$ ENTER
While using the onscreen menus, press the
ENTER button to
activate (or change) a
particular item.
% P.MODE
Used to select the
picture effect.
^ TV
Used to return to the TV
mode when it is in
external input mode.
& SLEEP
Used to select a preset
time interval for
automatic turn off.
Installing Batteries
1 POWER
Used to switch the TV
on and off.
2 Numeric buttons
Used to select channels
directly.
3 -/-Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is
displayed. Enter the
two-digit channel
number.
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “-” ends of the batteries are
inserted correctly or the batteries are drained.
➢ Do not mix battery types, i.e. alkaline and manganese.
English - 2
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2
Press the “I” button (On/Off) on the front (or side) of the
television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 4.
➢ If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Function - Plug & Play” on page 3.
4
To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
he
e
el -
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 3
Placing the Television in Standby Mode
Function - Plug & Play
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1
1
2
☛
sic
o
Press the POWER button on the remote control while
viewing.
The television is in standby mode.
To switch the television back on, simply press it again.
2
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Off)
3
Plug & Play
If the television is in standby
mode, press the POWER
button on the remote control.
The Plug & Play is displayed. It flickers for a little
while, and then Language menu is displayed.
Select the appropriated
language by pressing the …
or † button. Press the
MENU button.
The Ant. Input Check
is displayed.
➢ If any language is not
selected, the language
menu will disappear
about 30 seconds later.
Language
4
5
Adjust
Select
Ant. Input Check
Auto Store
Exit
Make sure that the antenna is connected to the
television (refer to page 1).
When the channel searching
has finished, the Time menu is
displayed with Clock
selected.
P 1
471 MHz
Exit
Time
Clock
Move
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has four icons: Picture, Sound, Channel, and
Function.
2
Press the … or † button to select one of the icons.
Press the œ or √ button to access the icon’s sub-menu.
3
Press the … or † button to move to items in the menu.
Press the œ or √ button to enter items in the menu.
4
Press the …/†/œ/√ button to change the selected
items. Press the MENU button to return to the previous
menu.
5
Press the EXIT button to exit from the menu.
English - 3
-- : -- am
Exit
Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the … or † button.
7
When you have finished, press
ENJOY YOUR WATCHING
the MENU button.
The ENJOY YOUR WATCHING is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ …/†
(Function) ➜ œ/√ ➜ …/† (Plug
& Play) ➜ œ/√
Function
Language : English
√
Time
√
Plug & Play
Blue Screen
: Off
√
Child Lock
Select
continued...
48%
6
English
Indonesia
Malaysia
Press the œ or √ button to
search the channels. The
searching starts. To stop the
search, press the MENU
button.
Enter
Exit
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 4
Channel - Auto Store
Channel - Manual Store
Channel - Add/Erase
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channel
You can store channels,
Manual Store
including those received via
Color System
: AUTO
cable networks. When storing
Sound System
: B/G
Search
: -/+
channels manually, you can
Prog.No.
: 18
Store
:?
choose:
- Whether or not to store each
Select
Adjust
Exit
of the channels found
- The programme number of each stored channel which
you wish to identify
Channel
You can exclude channels you
Add/Erase
have chosen from the channels
P 1 : Added
you scanned. When you scan
P 2 : Added
P 3 : Added
through the stored channels,
P 4 : Added
those you have chosen to skip
are not displayed. All of the
Select
Adjust
Exit
channels that you did not
specifically choose to skip are displayed during scanning.
Channels are sorted and stored
Channel
in the order which reflects their
√
Auto Store
√
Manual Store
position in the frequency range
√
Add/Erase
√
Fine Tune
(with lowest first and highest
√
Sort
last). The programme originally
selected is then displayed.
Select
Enter
Exit
➢ To stop the search before it
has finished, press the
P 1
471 MHz
48%
MENU button.
When finished, the Sort menu
Exit
is displayed. To sort the stored
channels into the desired
numerical order, refer to “Channel - Sort”. To exit without
sorting, press the MENU button.
◆ Color System:
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
➢ NTSC4.43 is a ‘trick’ playback mode used by
special VCR’s to play PAL-recorded videos in NTSC
mode.
◆ Sound System: B/G,I,D/K,M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Prog.No. (Programme number to be assigned to a
channel)
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
Channel
Sort
From
To
Store
Select
:P 1
: P-: ?
Adjust
Exit
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
English - 4
Select Added or Erased by pressing the œ or √ button
repeatedly.
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 5
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the
channel, as this is done
automatically during the search
and store operation. If however
the signal is weak or distorted,
you may have to fine-tune the
channel manually.
Channel
Fine Tune
Tune
Store
Erase
Select
: -/+
: ?
: ?
Adjust
Exit
◆ Tune: You can obtain a sharp and clear picture and
good sound quality.
◆ Store: You can memorise adjusted picture or sound.
◆ Erase: You can erase adjusted picture or sound.
Function - Child Lock
Function - Time
Function
This feature allows you to
Child Lock
prevent unauthorized users,
Child Lock
: On
such as children, from watching
Prog.No.
:1
Lock
:?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
Select
Adjust
Exit
using front (or side) panel
buttons. Only remote control can release the Child Lock
setting, so keep the remote control away from children.
Function
◆ Clock
Time
You can set the television
Clock
11:35 am
clock so that the current time
Timer
On
On time
07:00 am
is displayed when pressing
Off time
11:00 pm
the INFO button on the
remote control. You must
Select
Adjust
Exit
also set the time if you wish
to use the automatic on or off timers.
➢ When pressing the “I” button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Prog.No.: Channel number to be locked.
◆ Lock: When press the œ or √ button, the Locked is
displayed.
➢
If any channel is locked, you can not enter the
Channel menu by using the control buttons on the
television, and the Child Lock : Locked is
displayed. You can access by using the remote control
only.
◆ Timer
Select On to activate the On/Off timers.
◆ On time / Off time
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛ You must set the clock first.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode. Press the SLEEP button on the remote
control. If the sleep timer is not yet set, Off is displayed.
If it is already set, the remaining time before which the
television switches to standby mode is displayed.
☛
English - 5
Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer “On” mode and prevents overheating, which
may occur if a TV is on for too long.
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Function - Language (depending on the model)
It is variable depending on the
model. When you start using the
television for the first time, you
must select the language which
will be used for displaying
menus and indications.
Function
Language : English
√
Time
√
Plug & Play
Blue Screen
: Off
√
Child Lock
Select
Adjust
Exit
Function - Blue Screen
If no signal is being received or
the signal is very weak, a blue
screen automatically replaces
the noisy picture background. If
you wish to continue viewing the
poor picture, you must set the
Blue Screen to Off.
Function
Language : English
√
Time
√
Plug & Play
Blue Screen
: Off
√
Child Lock
Select
Adjust
Exit
Page 6
Picture Mode / Adjust / DNIe Jr
Important Warranty Information
Regarding Television Format Viewing
◆ Mode: Custom/Standard/Sports/Natural/Mild
You can select the type of
Picture
picture which best
œ
√
Mode
Custom
√
Adjust
corresponds to your viewing
DNIe Jr :
On
requirements.
➢ You can select these
options simply by
Select
Adjust
Exit
pressing the P.MODE
button on the remote control.
Standard screen format televisions (4:3, the aspect
ratio of the screen width to height) are primarily
designed to view standard format full-motion video.
The images displayed on them should primarily be in
the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than
15% of the total television viewing per week.
◆ Adjust: Color Tone - Normal/Warm1/Warm2/
Cool1/Cool2
Contrast
Brightness
Sharpness
Color
Tint(NTSC only)
When the mode is set to
Picture
Custom, the Adjust menu
Adjust
is displayed.
Color Tone : Normal
Contrast
100
The television has several
Brightness
50
Sharpness
50
settings which allow you to
Color
50
control the picture quality.
Select
Adjust
Exit
➢ If you make any
changes to these settings, the picture mode is
automatically switched to Custom.
Wide screen format televisions (16:9, the aspect ratio
of the screen width to height) are primarily designed to
view wide screen format full-motion video. The images
displayed on them should primarily be in the wide
screen 16:9 ratio format, or expanded to fill the screen
if your model offers this feature, and constantly
moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded
standard format television video and programming,
should be limited to no more than 15% of the total
television viewing per week.
◆ DNIe Jr (Digital Natural Image engine Junior)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you. DNIe Jr
technology will fit every signals into your eyes.
Sound - Balance
You can adjust the sound
balance of left and right
speakers.
Sound
Balance
Select
English - 6
L 50
Adjust
R 50
Exit
Additionally, viewing other stationary images and text
such as stock market reports, video game displays,
station logos, web sites or computer graphics and
patterns, should be limited as described above for all
televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging
of picture tubes (CRTs) that leave subtle, but
permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and
images, and primarily display full screen moving
images, not stationary patterns or dark bars.
On television models that offer picture sizing features,
use these controls to view the different formats as a
full screen picture.
Be careful in the selection and duration of television
formats used for viewing. Uneven CRT aging as a
result of format selection and use, as well as other
burned-in images, is not covered by your Samsung
limited warranty.
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 7
Troubleshooting
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
,
o
to
es
n
n
g
s,
OSD Map
Picture
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the “I” button (On/Off)
and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
✽ : It is variable depending on the model.
- Mode
- Adjust
- DNIe Jr
Sound
- Balance
Channel
- Auto Store
- Manual Store
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting
the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
- Custom / Standard / Sports / Natural / Mild
- Color Tone - Normal / Warm1 / Warm2 / Cool1 / Cool2
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
- Off / On
-
Color System ✽
Sound System ✽
Search
Prog.No.
Store
-
Clock
Timer
On time
Off time
- AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58
- B/G, I, D/K, M
- Add/Erase
- Fine Tune
- Sort
Function
- Language ✽
- Time
- Plug & Play
- Blue Screen
- Child Lock
English - 7
- Off / On
- Off / On
AA68-03872A-02Eng_E.asia
9/13/06
8:53 AM
Page 8
This page is intentionally
left blank.