Samsung AF9000 Floor-standing AC with Digital Inverter Technology, 28000 BTU/h User Manual

QUESTIONS OR COMMENTS
COUNTRY
CALL
OR VISIT US ONLINE AT
INDONESIA
021-56997777
08001128888
www.samsung.com/id/support
PHILIPPINES
1-800-10-7267864 [PLDT]
1-800-8-7267864
[Globe landline and Mobile]
02-4222111 [Other landline]
www.samsung.com/ph/support
THAILAND
0-2689-3232
1800-29-3232
www.samsung.com/th/support
VIETNAM
1 800 588 889
www.samsung.com/vn/support
Importir:
PT. Samsung Electronics Indonesia Jl. Jababeka Raya Blok F 29-33
Kawasan Industri Cikarang, Cikarang Bekasi 17530
S-east_MEMORY_IBIM_03955A-02_co_EN.indd 2
2014-10-31 오후 1:49:13
AF28FVSDA Series
AF28FVZDA Series
Air Conditioner
user & installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
EN TH IN VI DB68-03955A-02
S-east_MEMORY_IBIM_03955A-02_co_EN.indd 3
2014-10-31 오후 1:49:14
Features of your new air conditioner
Samsung Air Solution! Cool, Clean and refreshing feeling at once
Cool Air : Your air conditioner uses air flow direction control which provide direct air flow in hot days and indirect air flow
when you are cooled down.
Refreshing Air : Auto mode will provide refreshing air by selecting the operation mode automatically from Cool, Dry, Purity
depending on the indoor air environment.
4 seasons of effective cleaning
Purity mode
ffPurity mode can be selected solely to save energy.
ffWhen the air conditioner operates, Zero filter and the Virus Doctor eliminates harmful contaminants to provide us with
the cleanest air.
Smart sensor
Camera on the top of the indoor unit will detect the movement within the indoor and when there is no movement for a
certain time, air conditioner will adjust the indoor temperature or turn off power automatically to save the energy
❋❋ Applicable to AF✴✴FVSD✴✴✴ only
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
2
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 2
2014-10-28 오후 12:00:46
Contents
USING PARTS
ENGLISH
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Checking the name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Checking the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turbo operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Air flow direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
good'sleep operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setting the On/Off timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Smart sensor operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Lighting function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Quiet operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto clean operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning the air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Open Source Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
INSTALLATION PARTS
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Choosing the installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Indoor/outdoor unit installation diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Drilling a hole and fixing the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connecting pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connecting drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Electrical work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Vacuum pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Performing leak test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Installing the earth wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Charging refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Check and test operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Pump down procedure (When removing the product) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 3
2014-10-28 오후 12:00:46
USING PARTS
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure that
you know how to safely and efficiently operate the extensive features and functions of
your new appliance.
If you have any questions, call your nearest contact center or find help and information
online at www.samsung.com.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal
injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal
injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Cut the power at the circuit breaker.
Do NOT disassemble.
FOR INSTALLATION
WARNING
Use the power line with the power specifications of the product or higher and use
the power line for this appliance only. In addition, do not use an extension line.
ff
Extending the power line may result in electric shock or fire.
ff
Do not use an electric transformer. It may result in electric shock or fire.
ff
If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified technician or
service company.
ff
Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
ff
Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not
exposed.
ff
Failing to do so may result in electric shock or fire.
4
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 4
2014-10-28 오후 12:00:46
ENGLISH
Do not install this appliance near a heater, inflammable material. Do not install
this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops). Do not install this appliance in a location where
gas may leak.
ff
This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where
it could fall.
ff
If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a gas
pipe, plastic water pipe, or telephone line.
ff
Failure to do so may result in electric shock, fire, an explosion, or other problems at
the product.
ff
Make sure to use a socket-outlet with ground.
FOR INSTALLATION
CAUTION
Install your appliance on a level and hard floor that can support its weight.
ff
Failing to do so may result in abnormal vibrations, noise, or problems with the
product.
Confirm that the indoor unit fixing device has been installed by confirming this
with an installation engineer.
ff
If the indoor unit fixing device is not installed, the indoor unit may vibrate and fall
and this may result in injury.
Install the draining hose properly so that water is drained correctly.
ff
Failing to do so may result in water overflowing and property damage.
5
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 5
2014-10-28 오후 12:00:46
Safety precautions
FOR POWER SUPPLY
WARNING
When the circuit breaker is damaged, contact your nearest service center.
Do not pull or excessively bend the power line. Do not twist or tie the power
line. Do not hook the power line over a metal object, place a heavy object on the
power line, insert the power line between objects, or push the power line into the
space behind the appliance.
ff
This may result in electric shock or fire.
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a thunder/
lightning storm, cut the power at the circuit breaker.
ff
Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service center.
ff
Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, cut-off the
power supply immediately and contact the nearest service center.
ff
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate
immediately without touching the power line. Do not touch the appliance or
power line.
ff
Do not use a ventilating fan.
ff
A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
ff
Failing to do so may result in problems with the product, water leakage, electric
shock, or fire.
ff
A delivery service for the product is not provided. If you reinstall the product in
another location, additional construction expenses and an installation fee will be
charged.
ff
Especially, when you wish to install the product in an unusual location such as
in an industrial area or near the seaside where it is exposed to the salt in the air,
please contact your nearest service center.
6
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 6
2014-10-28 오후 12:00:46
ENGLISH
Do not operate the appliance with wet hands.
ff
This may result in electric shock.
Do not strike or pull the air conditioner with excessive force.
ff
This may result in fire, injury, or problems with the product.
ff
Importantly, if the support bracket is excessively impacted, it may become
damaged.
Do not place an object near the outdoor unit that allows children to climb onto
the machine.
ff
This may result in children seriously injuring themselves.
Do not turn the air conditioner off with the circuit breaker while it is operating.
ff
Turning the air conditioner off and then on again with the circuit breaker may
cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well out of the
reach of children, as packaging materials can be dangerous to children.
ff
If a child places a bag over its head, it may result in suffocation.
Do not insert your fingers or foreign substances into the outlet when the air
conditioner is operating or the front panel is closing.
ff
Take special care that children do not injure themselves by inserting their fingers
into the product.
7
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 7
2014-10-28 오후 12:00:46
Safety precautions
FOR USING
WARNING
Do not insert your fingers or foreign substances into the air inlet/outlet of the air
conditioner.
ff
Take special care that children do not injure themselves by inserting their fingers
into the product.
Do not use this air conditioner for long periods of time in badly ventilated
locations or near infirm people.
ff
Since this may be dangerous due to a lack of oxygen, open a window at least once
an hour.
If any foreign substance such as water has entered the appliance, cut-off the
power supply and contact the nearest service center.
ff
Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
ff
Do not use any fuse (such as copper, steel wire, etc.) other than the standard fuse.
ff
Failing to do so may result in electric shock, fire, problems with the product, or
injury.
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
ff
Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a
year.
ff
Failing to do so may result in injury, death or property damage.
Do not stand on top of the appliance or place objects (such as laundry, lighted
candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the
appliance.
ff
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
ff
This may result in electric shock.
Do not forcefully open the front panel while air conditioner is operating.
ff
This may cause damage to the product.
8
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 8
2014-10-28 오후 12:00:46
FOR CLEANING
ENGLISH
Do not spray volatile material such as insecticide onto the surface of the
appliance.
ff
As well as being harmful to humans, it may also result in electric shock, fire or
problems with the product.
Do not drink the water from the air conditioner.
ff
The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not disassemble
the remote controller.
Do not touch the pipes connected with the product.
ff
This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals,
plants or cosmetics, or for any other unusual purposes.
ff
This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from the air
conditioner for long periods of time.
ff
This may result in harm to humans, animals or plants.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Max current is measured according to IEC standard for safety and current is
measured according to ISO standard for energy efficiency.
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use
benzene, thinner, alcohol or acetone to clean the appliance.
ff
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, cut-off the power supply and wait
until the fan stops.
ff
Failing to do so may result in electric shock or fire.
9
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 9
2014-10-28 오후 12:00:46
Safety precautions
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor unit
since it has sharp edges.
ff
To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
ff
For cleaning inside the appliance, contact your nearest service center.
ff
When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the air
conditioner’ section. Failing to do so may result in damage, electric shock or fire.
10
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 10
2014-10-28 오후 12:00:46
Checking before use
Using indoor unit
ENGLISH
Make sure that curtain does not block the air inlet.
ff
It may decrease cooling performance by blocking air circulation.
In Cool mode, set the appropriate desired temperature.
ff
If the desired temperature is too low, it may be harmful for human body and power
consumption will also increase. Set the desired temperature about 5°C lower than the
outdoor temperature.
When cooling the room, use air conditioner and fan together to save energy.
ff
When the air conditioner is used with fan, cooling will be more effective and energy can
be saved.
When the air conditioner is operating, close the doors and windows.
ff
When the air conditioner is used with open doors and windows, cooling effect will
decrease.
ff
If you use the air conditioner for over an hour, open the window to ventilate the air
about once every hour.
Install the product away from sunlight or heating devices.
ff
Close the curtain when the sun shines.
ff
Do not use any heating devices during cooling operation. Cooling effect will decrease.
Storing indoor unit
ff
Dry the air conditioner thoroughly by operating Purity mode for 3 to 4 hours.
ff
Stop the operation and disconnect the power or turn off the auxiliary power switch.
CAUTION
•Do not move the product on your own. Pipe may get loose or pipe can get
damaged.
Using outdoor unit
Take away covers or barriers.
ffIt may cause product failure, and poor performance in cooling by blocking air flow.
Installing outdoor unit
ffInstall the outdoor unit in well ventilated area with no sunlight. If sunlight is unavoidable, install a sunshade.
11
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 11
2014-10-28 오후 12:00:47
Checking before use
Auxiliary power switch
Turn on the auxiliary power switch which is installed separately. (Only applicable for outdoor unit with separate power
supply)
NOTE
Auxiliary power switch (NFB, ELB, etc.)
• Auxiliary power switch is not included in the package. Purchase and install it separately.
• Auxiliary power switch is a device for preventing over-current or short circuit. Install it separately near the indoor
unit and turn it off when cleaning or when you don’t use it for long time.
• If NFB or ELB has already installed in the switch box of the building, you don’t need to install auxiliary power
switch.
Operation ranges
When the air conditioner operates outside of temperature and humidity range indicated
below, protective device may activate and stop the operation.
Mode
Indoor temperature
Outdoor temperature
Indoor humidity
Cool
21 °C ~ 32 °C
21 °C ~ 52 °C
Relative humidity 80 % or less
Dry
21 °C ~ 30 °C
21 °C ~ 52 °C
-
❋❋ If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
Functions available for each model
Model Name
Smart Sensor
ZERO Filter
Virus Doctor
Full HD Filter
Lighting
AF28FVSDA✴✴N





AF28FVZDA✴✴N
-




❋❋ The use of some function buttons on the remote controller may differ depending on the model. When pressing the
function buttons on the remote controller which are for a different model from the one purchased, the icon of the
selected function will be displayed, but cannot be used with your air conditioner.
12
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 12
2014-10-28 오후 12:00:47
Checking the name of the parts
Your air conditioner may slightly look different from illustration depending on the model.
Indoor unit
Remote controller receiver
Display
Arise automatically when turning on the air
conditioner
ENGLISH
Smart sensor(Camera)
Air inlet
Intake outdoor air
Air control panel
Move with selected air
direction
Full HD filter
Control
panel
Zero filter
Lighting
Lighting is turned
on or off
Full HD filter
Air outlet
Discharge cool air
Virus doctor
Support bracket
Front remote controller holder
Fix the remote controller holder on the
front side of an indoor unit with screws.
CAUTION
•If the support
bracket is
excessively
impacted, it may
become damaged.
13
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 13
2014-10-28 오후 12:00:47
Checking the name of the parts
Display
Fan speed
Mute
Virus
doctor
Timer
Cleaning
good'sleep
mode
Temperature
Outdoor unit
operation
Air conditioner operation mode
Current operation mode is
displayed.
Smart sensor
operation
Buttons on control panel
On/Off button
Temperature control button
Increase or decrease the temperature
by 1 ˚C
Individual control button
❋❋ The number of air outlets is different depending on the models.
14
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 14
2014-10-28 오후 12:00:48
Operation with control panel
1. Press the Power button to operate the air conditioner.
ffThe air outlets will open in order with melody sound and the air
conditioner will operate with auto mode.
Press the Power
button one more time.
ENGLISH
Stop
2. Press the [ ], [ ] buttons to adjust the desired temperature.
ffWhen pressing the button first, the mode of air conditioner will change
to cool mode.
ffYou can adjust the desired temperature by 1 ˚C within the range of
18 ˚C ~ 30 ˚C by pressing the [ ], [ ] buttons.
3. Adjust fan height with the three individual air outlet control buttons.
ffYou can adjust the fan height by controlling the air outlet individually.
ffIndividual control will be canceled when turning the air conditioner off
and on.
❋❋ The fan speed of each air outlet is different.
15
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 15
2014-10-28 오후 12:00:48
Checking the remote controller
Function may be different depending on the model.
ffPoint the remote controller towards the remote control receiver of the unit.
ffWhen the button is pressed, you will hear ringing or beep sound and Transmit indicator (
controller display.
) will appear on the remote
Remote controller buttons
Remote controller display
Mode
Select one of the 5 operation modes
Turbo
Operate in maximum fan speed to cool
quickly
Power
Turn on/off the air conditioner
Solo/Family
Select Solo/Family mode
Purity
Select Zero filter and Virus doctor
Air Flow
Set the air flow to cool effectively
according to the surrounding
Smart Sensor
Select Smart sensor mode
WPS
Fan
Adjust how much air flows through the
air conditioner with the 4 different fan
speeds
Temp + –
Increase/Decrease the temperature
by 1 ˚C
good'sleep
Set the good'sleep mode on
Auto Clean
Activate auto clean function to dry inside
of the indoor unit (to get rid of odor)
Wi-Fi
Lighting
Lighting
Set lighting of indoor unit
On Timer
Set the On timer on
Quiet
Reduced noise is generated during
operation
Beep Off
To silence the beep sound when pressing
the button
Set/Cancel
Set/Cancel the timer/good'sleep mode
Off Timer
Set the Off timer on
[2ndF] button
Select the function underneath a button
• 2ndF button: When pressing the 2ndF button,
NOTE
will appear on the remote controller display and you can
select the below function of a button.(e.g. When pressing
 Lighting , you can select the Lighting function.)
If you press the 2ndF, Power, Purity and the Set/Cancel button or don't press any buttons for 10 seconds, the
display will disappear and you can select the function of the button.
16
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 16
2014-10-28 오후 12:00:49
Remote controller display
Operation mode
indicator
Transmit indicator
Low battery indicator
ENGLISH
Set temperature/
Time indicator
Fan speed indicator
Auto
Low
Medium
High
On/Off Time indicator
Air flow direction
indicator
❋❋ Heat mode will be displayed on the remote controller and reception sound will be ringing but
the air conditioner will not operate the heat mode. When you select heat mode with a remote
controller and you turn the air conditioner off and on, the air conditioner will operate with auto
mode and heat mode will be displayed on the remote controller. Change the operation mode of a
remote controller.
❋❋ Left fan and right fan will be displayed as not supported function and reception sound will be
ringing. However, the left and right fans will not operate.
Battery changing time
Inserting the batteries
When the battery is exhausted,( )will be displayed in
the remote controller display. When the icon appears,
change the batteries. The remote controller requires two
1.5V AAA type batteries.
1. Open the battery cover.
ffPush the (
) part in the
direction of the arrow and lift up
the cover.
2. Insert the batteries.
ffCheck and match the (+), (-)
signs and insert them in correct
position.
3. Close the battery cover.
ffMatch the cover and bottom part
of the remote controller and press
it until you hear click sound.
Storing the remote controller
When you do not use the remote controller
for a long time, remove the batteries from the
remote controller and store it.
WPS
Lighting
CAUTION
NOTE
Wi-Fi
•Make sure that water is not allowed to enter the remote controller.
• There is a possibility that the air conditioner will not operate by remote controller near strong light such as a
fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver of
the indoor unit.
• If other electrical products are operated by the remote controller, call your nearest service center.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
17
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 17
2014-10-28 오후 12:00:50
Basic operation
Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
In Auto mode, the air conditioner will automatically set the operation mode in Cool/Dry/Fan mode to provide refreshing air
throughout your indoor area.
ffIn Auto mode, the air conditioner will automatically set the operation mode depending on the indoor surrounding.
-- Display on the indoor unit will display Auto (Cool), Auto (Dry) and Auto (Purity)
ffIn Auto mode, Smart sensor will detect the surrounding area with the camera on the indoor unit. Therefore, air flow
direction and the fan speed may differ depending on the surrounding condition.
ffWhen selecting the individual operation of an indoor unit in auto mode, the indoor unit will change to cool mode.
Cool
Cool mode is frequently used and you can freely control the temperature, fan speed, and air flow direction in cool mode.
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air. Outdoor unit will
repeatedly and automatically turn on/off for maximum dehumidification according to the temperature difference of the
current and desired temperature. When the outdoor unit operates, cool air may come out from the indoor unit.
ffAs you lower the set temperature of a remote controller, the amount of dehumidification will increase.
ffAs you lower the set temperature of a remote controller, indoor temperature may decrease.
Purity (
)
This operation eliminates harmful contaminants within the air to provide a healthy and clean environment.
ffYou can select Purity mode by pressing the
button while the air conditioner is on or off.
ffIn purity mode, will appear on the display of an indoor unit and
will appear in 1 minute.
ffYou can press the
button during Cool/Dry mode and adjust the desired temperature.
ffIf you select Purity function in Auto mode, operation mode will change to Cooling (Purity) mode.
ffFront panel will be closed slightly when Purity mode is selected solely while the air conditioner is operating.
ffWhen the Purity mode is selected during air conditioner operation, changes in power consumption or operation noise
will be very subtle.
ffWhen the air conditioner and Purity mode is on at the same time, you can press the Power button to stop the
operation.
ffWhen Purity mode is on, you can press the
button to stop the Purity operation.
18
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 18
2014-10-28 오후 12:00:50
Press the
button to turn on the air conditioner.
Family mode
Solo mode
ENGLISH
Press the
button to set Solo/Family mode.
• Solo : Select this function if you are alone in the room or want to save your electricity bill.
• Family : Select this function if there are lots of people in the room or require powerful cooling.
Remarks
The middle air outlet will be closed when the air conditioner reaches the
desired temperature in solo mode. When selecting the solo mode in purity
mode, the upper and middle air outlets are closed.
: Open
: Close
• Family mode is set as default setting in all operation mode except Auto mode.
• During Auto mode, Solo/Family mode cannot be changed with remote controller.
Press the
button to set the operation mode.
❋❋ Heat mode will be displayed on the remote controller and reception sound will be ringing but the heat mode will not
operate.
Press the
button to set the desired fan speed.
Auto
(Auto) [ Operation mode will change to Cool mode when the Fan speed is adjusted.]
Cool
(Auto),
Dry
(Auto)
Purity (
)
Press the
(Medium),
(Medium),
(High)
(High)
button to adjust the desired temperature.
Auto
Operation mode will change to Cool mode when desired temperature is adjusted.
Cool
You can adjust the desired temperature by 1 °C within the range of 18 °C ~ 30 °C.
Dry
You can adjust the desired temperature by 1 °C within the range of 18 °C ~ 30 °C.
Purity (
NOTE
(Low),
(Low),
)
Temperature adjustment is not possible.
• If you select Purity function additionally while operating in other mode, you can adjust the temperature
(except in Auto mode).
• If you press the Temp + or - button on the indoor unit control panel while operating in Purity mode,
operation mode will change to Cool mode.
19
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 19
2014-10-28 오후 12:00:50
Turbo operation
Turbo function will be helpful to cool your room quickly and effectively.
Press the
button on the remote controller in the Cool mode.
ffTurbo indicator appears on the remote controller display and the air conditioner
will operate in Turbo function for 30 minutes.
ff
Cancel Press the Turbo, Mode, Quiet, Smart Sensor or good`sleep button.
WPS
Wi-Fi
NOTE
• Turbo function is only available in the Cool mode.
• If you select the Turbo function during the Quiet/Smart sensor/good`sleep
operation, the Quiet/Smart sensor/good`sleep operation will be canceled.
• You can adjust the air flow direction.
• You cannot adjust the desired temperature and fan speed.
• When selecting the individual operation of an indoor unit in turbo operation,
the indoor unit will change to cool mode.
Air flow direction
You can adjust the air flow direction according to the surrounding environment.
Press the
button to select desired air flow direction.
WPS
Wi-Fi
Indirect
Air will not flow to the person directly but provide coolness rather indirectly.
Direct
Cool air will flow directly to the person.
Center
Cool air will come out intensively from the center.
Wide
Air flow blades will move left/right to provide the cool air to wide range of
area.
Long
It is efficient to cool the area further away.
Operation mode
NOTE
Supported air flow
Auto
Indirect, Direct
Cool/Dry/Purity
Center, Wide, Long
• Air flow cannot be selected during good'sleep mode.
• When the Long air flow direction is selected, you may change the fan speed
from the remote controller and the beep may sound but the air conditioner is
not actually operating in selected setting.
MODE
AUTO
Model Name
Air flow direction
AF28FVSDA✴✴N
Indirect, Direct
AF28FVZDA✴✴N
You cannot adjust the direction of air flow.
20
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 20
2014-10-28 오후 12:00:51
good'sleep operation
For a comfortable sleep, the air conditioner will operate in Fall asleep  Sound sleep  Wake up from good’ sleep mode.
When the air conditioner is on and in cool mode.
Lighting
Wi-Fi
ENGLISH
WPS
1. Press the good'sleep button on the remote controller to select the good'sleep mode.
ffgood'sleep indicator appears and Off timer indicator starts blinking on the remote
controller display.
2. Press the good'sleep button to set the time.
ffYou can set the time in half hourly units from 30 minute ~ 3 hours and hourly units
from 3 hour ~ 12 hours.
ffThe operation hour can be set to minimum 30 minutes and maximum 12 hours.
ffDefault operation hour is set to 8 hours.
3. Press the Set/Cancel button to activate it.
ffOff timer indicator stops blinking and set time will be displayed.
ff /
icon appears in the display of the indoor unit and good'sleep mode starts
operating.
ffIf you don't press the Set/Cancel button to start the good'sleep mode within 10
seconds, the operation is canceled so you should check the Off indicator on the
remote controller display and
/
icon on the indoor unit display.
Cancel Press the Set/Cancel button once again.
You can set the desired temperature by 1 ˚C within the range of 18 ˚C ~ 30 ˚C.
Fan speed will be adjusted automatically according to the good'sleep mode.
Air flow direction will be adjusted automatically according to the good'sleep
mode.
21
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 21
2014-10-28 오후 12:00:52
good'sleep operation
Temperature and fan speed changes in good'sleep mode
1. Fall asleep mode : Provides you with a comfortable environment for a good sleep by rapidly cooling your room and
releasing a breeze that induces sleep.
2. Sound sleep mode : The sound sleep mode adjust temperature and air flow in waves to maintain healthy skin
temperature while it aids deep sleep. According to the change of good’ sleep operation hours, the sound sleep hour can
be longer or shorter.
3. Wake up from good'sleep mode : Provides you with the air flow that adjusts your body temperature to wake you up in a
fresh status.
NOTE
• In first 30 minutes of good'sleep mode, air conditioner will operate in Purity (Cool) mode.
• The recommended set temperature is 25 °C~27 °C and 26 °C is the most ideal temperature. If the set
temperature is too low, you may feel cold or dry and catch a cold.
• You may not have such a restful sleep if the good'sleep is set too short or long because the default is set to
8-hour-operation.
• If the good’ sleep mode is set less than 4 hours, the operation will stop after the set hours. If the good'sleep
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops automatically.
• If you press the Solo/Family, Smart Sensor, Turbo, Mode or Quiet button during the good’ sleep operation, the
operation is canceled and the selected operation starts.
• Only the latest setting timer will be applied between the On Timer/Off Timer and good'sleep functions.
• You can set the Purity function during the good’ sleep operation.
• When operating the good'sleep mode, the air outlet will be automatically turned off and on depending on the
difference between the current temperature and desired temperature.
22
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 22
2014-10-28 오후 12:00:52
Setting the On/Off timer
You can set the air conditioner to turn on/off automatically at desired time.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on.
ENGLISH
Lighting
1. Press the On timer or Off timer button.
ffOn/Off timer indicator will blink on the remote controller display.
2. Press the On timer or Off timer button repeatedly to set the time.
ffYou can set the time in half hourly units from 30 minute ~ 3 hours and hourly units
from 3 hour ~ 24 hours.
ffThe set hour is set to minimum 30 minutes and maximum 24 hours.
3. Press the Set/Cancel button to activate it.
ffOn/Off timer indicator will stop blinking and the set time will be displayed.
ff icon appears in the display of the indoor unit and timer setting will be completed.
ffIf you don't press the Set/Cancel button within 10 seconds after selecting the On/
Off timer function, the air conditioner will return to the previous status, so you should
check the On/Off timer indicator on the remote controller display or
icon on the
indoor unit display.
Cancel Press the Set/Cancel button once again.
Additional options available in On timer mode
<Setting On timer>
You can select from Auto  Cool  Dry  Purity  Heat.
When setting the on timer with Heat mode, the air conditioner will operate with
Auto mode.
You can adjust the temperature in Auto/Dry mode. Operation mode will change
to Cool mode if you press the Temp + or - button in Auto mode, and you cannot
adjust the temperature during Purity mode.
Lighting
You cannot adjust the fan speed.
NOTE
<Setting Off timer>
• Only the latest setting timer will be applied between the On Timer/Off Timer
and good'sleep functions.
• About 10 seconds after setting the On timer, only the On timer indicator will
appear on the remote controller display.
• If you press the Power button on the indoor unit after setting the On timer
function with the remote controller, Timer indicator on the indoor unit display
will disappear and the function will be canceled. However, Timer indicator on
the remote controller will remain on but the function will not work.
23
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 23
2014-10-28 오후 12:00:52
Setting the On/Off timer
Combining On Timer and Off Timer
If the air conditioner is Off
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
-- The air conditioner will turn on after 3 hours
from the moment you have set the timer. Your air
conditioner will remain on for 2 hours and then turn
off automatically.
NOTE
If the air conditioner is On
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
-- The air conditioner will be turned off after 1 hour
from the moment you have set the timer. After 2
hours, your air conditioner will turn on.
• On timer and Off timer setting time should be different from each other.
• If you press Set/Cancel button or Power button while the both On timer and Off timer are set simultaneously,
the functions of both On timer and Off timer are canceled at the same time.
24
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 24
2014-10-28 오후 12:00:52
Smart sensor operation
In Cool mode, camera on the top of the indoor unit will detect the movement within the indoor and when there is no
movement for certain time, air conditioner will adjust the indoor temperature or turn off power automatically.
Press the
button during Cool mode.
❋❋ Applicable to AF✴✴FVSD✴✴✴ only
Wi-Fi
ENGLISH
WPS
ff icon appears on the remote controller display and the icon appears on the
indoor unit display.
ffWhen the movement is not detected for 1 hour, temperature will be adjusted
automatically.
ffWhen the movement is not detected for 2 hours, air conditioner will turn off
automatically.
Cancel Press the Smart Sensor button once again.
NOTE
• Smart sensor will detect about 25° on the left and right side of the product.
• In dark places, camera cannot detect the movement and Smart sensor function
may not work properly.
• Smart sensor mode may get disturbed by change of light or movement
change caused by devices such as TV, fan...etc.
<Remote controller display>
<Indoor unit display>
Lighting function
You can create fresh mood of indoor room with soft light by turning the light on.
After pressing the
button and checking the
to adjust the lighting level of an indoor unit.
Lighting
indicator on the remote controller display, press the
button
Lighting
ffEach time you press the Lighting button during air conditioner operation, the
lighting level will be adjusted. (The lighting function will work only with opened air
outlet.)
ffWhen changing the lighting level, press the 2ndF button first and then press the
Lighting button repeatedly to adjust the desired level.
<Remote controller display>
NOTE
Press times
Brightness
1
Level 1 (Low)
2
Off
3
Level 3 (High)
4
Level 2 (Medium)
• The lighting figure may change depending on the status of air conditioner
operation.
• The lighting figure will differ depending on the models.
• The use of lighting function will be different depending on the model.
• When the air conditioner is turned off, the reception sound will be ringing from
the air conditioner but the lighting function will not operate.
25
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 25
2014-10-28 오후 12:00:53
Quiet operation
This function can reduce the noise generated during air conditioner operation.
Press the
button to select Quiet function.
ff icon will appear on the remote controller display.
Cancel Press the Quiet, Mode or Fan
,
button once again.
Lighting
You can adjust the desired temperature by 1 °C within the range of 18 °C~30 °C.
Since the fan speed is fixed as
cancel the Quiet operation.
(Auto), pressing the Fan
,
button will
You can set the air flow direction.
NOTE
• You can select the Quiet operation while the air conditioner is in cool mode.
If you select the Quiet operation during the Smart sensor/Turbo/good'sleep
operation, corresponding operation will be canceled.
• When selecting the individual operation of an indoor unit in quiet operation,
the indoor unit will change to cool mode.
Auto clean operation
Auto clean function will prevent mold from growing by eliminating the moisture inside of the indoor unit.
Press the
button.
When the air conditioner is turned on,
Lighting
ff icon appears in the display of the indoor unit and the Auto cleaning function
will run for 3 minutes after air conditioner stops operating.
When the air conditioner is turned off,
ff icon appears in the display of the indoor unit and the Auto cleaning function
will run for 3 minutes.
Cancel Press the Auto Clean button once again.
NOTE
• The Auto clean indicator appears only on the indoor unit display.
• If you select another mode during auto clean operation, the selected mode will
start its operation. When the selecte mode finishes, the auto clean function will
be initialized and run again for 3 minutes.
26
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 26
2014-10-28 오후 12:00:54
Cleaning the air conditioner
CAUTION
•Make sure to turn off the circuit breaker when cleaning the air conditioner.
ENGLISH
Cleaning the indoor unit
ffWipe the surface of the unit with a slightly wet or dry cloth when needed.
ffBrush away the dust on the narrow gap of air conditioner.
NOTE
CAUTION
• Since the panel of the product can be scratched easily, use the exclusive cleaning
cloth (micro fiber) for cleaning. Wet the exclusive cleaning cloth (micro fiber) with
little bit of water, and make sure to remove any foreign object on the cloth since the
product can be scratched easily.
• When cleaning the indoor unit, use soft and slightly wet cloth(micro fiber) because
the indoor unit panel is easily scratched. Dust off the cloth before cleaning to prevent
indoor unit from being scratched by the foreign material on the cloth.
• If it is difficult to clean the indoor unit heat exchanger on your own, contact service
center.
•Do not clean the display using alkaline detergent.
•Do not clean the surface with sulfuric acid, hydrochloric acid or
organic solvents (thinner, kerosene, acetone) or attach stickers.
It may damage the surface of the unit.
Cleaning the outdoor unit heat exchanger
ffWhen dust accumulates on the heat exchanger, it may decrease cooling
performance. Therefore, clean it regularly.
ffSpray water to clean the dust.
NOTE
CAUTION
• If it is difficult to clean the outdoor unit heat exchanger on your own,
contact service center.
•Be careful with the sharp edges on the outdoor unit
heat exchanger.
Heat exchanger
27
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 27
2014-10-28 오후 12:00:54
Cleaning the air conditioner
Cleaning the Full HD filter
Full HD filter filters the big dust of incoming air.
Pull out the Full HD filter in the arrow direction.
ffBefore pulling out the lower Full HD filter, take out
the Zero filter first.
Remove dust with a vacuum cleaner or running
water.
ffWhen the dust is serious, clean the filter with
warm water which contains a neutral detergent.
However, when rubbing out the filter with a
brush, the Full HD filter may be damaged.
Push the Full HD filter to the end in the arrow
direction so that it can be completely fixed.
ffAfter pushing the lower
Full HD filter, push the
Zero filter.
Dry the filter completely in the shade.
ffWhen drying the Full HD filter, make sure the
filter is not exposed to direct sunlight.
NOTE
• Clean the Full HD filter every 2 weeks. Cleaning term may differ depending on the usage and environmental
conditions.
28
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 28
2014-10-28 오후 12:00:54
Cleaning the Zero filter
Zero filter traps small dust particles within the air. It is washable and it can be used semi-permanently.
Soak the filter in the water and shake it up and down for
few times.
ffDo not disassemble the Zero filter when cleaning it.
ffIf the accumulated dust is heavy, soak the filter in water
mixed with detergent and shake it in water for 30
minutes until it is cleaned.
Push the Zero filter in the
direction of the arrow
and make sure it is fixed
in correct position. Put
the lower Full HD filter
back.
Dry the filter in a ventilated area.
ffPut the filters vertically for 12~24 hours when drying
(Drying time can be shorter depending on the
condition)
ffDo not dry the Zero filter in direct sunlight. It may get
deformed.
CAUTION
NOTE
ENGLISH
Remove the lower Full HD
filter. Grasp the handle on
the Zero filter and remove it
by pulling it in the direction
of the arrow shown in the
figure.
•Be careful with the sharp rear surface of the Zero filter. You may cut in your hands.
• Clean the Zero filter every 3 months. (Based on 8 hours of use per day.) Cleaning term may differ depending on
the usage and environmental conditions.
29
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 29
2014-10-28 오후 12:00:55
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save time
and unnecessary expenses.
PROBLEM
The air
conditioner
does not work
at all.
Front panel
remains open.
SOLUTION
•Check power status and then operate the air conditioner again.
•Switch on the circuit breaker and then operate the air conditioner
again.
•Check if the air conditioner is turned off by Off timer or Smart sensor.
Operate the air conditioner again by pressing the Power button.
•Check if there is a power failure.
•Check if there is any object blocking the front panel from closing.
Remove the object and then operate again.
The temperature
•Check if you have selected Turbo/Purity mode. In these modes,
adjustment is
temperature adjustment is not available.
not working.
•Check if the set temperature is higher than the current temperature.
•Check if the Full HD filter is blocked by dirt. If there is a lot of dust on
the Full HD filter, cooling performance may decrease. Clean them
frequently.
•Check if the outdoor unit is covered or installed near the obstacle.
Take the cover off and take the obstacle away.
•If you want to operate the air conditioner in the sunlight, cover the
Cool air does not
outdoor unit using curtains or etc.
come out of the
air conditioner. •If the doors or windows are open, it may cause poor cooling
performance. Close the doors and windows.
•If you have selected Purity mode without selecting other mode, cool
air does not come out of the air conditioner. Press the Mode button
to select other mode.
•Check if the pipe length is too long. When the pipe length exceeds
maximum allowable pipe length, cooling performance may
decrease.
Air flow
•Check if you have selected good'sleep mode. In this mode, you
adjustment is
cannot adjust the air flow direction since it is set to Auto.
not working.
Fan speed
•Check if you have selected Dry/Turbo/good'sleep mode. In these
adjustment is
modes, fan speed is set to Auto and you cannot adjust the fan speed.
not working.
30
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 30
2014-10-28 오후 12:00:55
PROBLEM
Timer function
does not work.
The air
conditioner is
not turned off.
Odors permeate
in the room
during
operation.
Error is indicated
ENGLISH
Remote
controller is not
working.
SOLUTION
•Check if your batteries are depleted.
•Make sure nothing is blocking your remote controller sensor.
•Check whether there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interrupt the electric waves.
•Stand towards the center of the product, point the remote controller
towards the remote control receiver and press the button.
•Check if you have pressed the Set/Cancel button on the remote
controller after setting the time.
•Check the air conditioner is in auto cleaning mode. When turning the
air conditioner off after using the auto cleaning function, it will take
3 minutes to turn the air conditioner off.
•Odor may permeate depending on the surrounding environment or
operating condition. Ventilate the indoor air.
•Check if the appliance is running in a smoky area. Ventilate the room
or operate the air conditioner in Purity mode for 1~2 hours. (We do
not use smelly components in the air conditioner.)
•Clean the Zero filter and Full HD filter if they are dirty.
•When error indications appear on the indoor unit display, press
the Set/Cancel button and Fan button for 4 seconds. If error
indications appear again, contact a service center.
•When
and
appear on the indoor unit
display, check the power cable of outdoor unit is connected. If the
connection is ok, turn the indoor unit off and on again.
•When
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
are blinking, the air conditioner has a
problem. In this case, contact a service center.
31
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 31
2014-10-28 오후 12:00:57
Troubleshooting
PROBLEM
SOLUTION
•Depending on the status of the air conditioner usage, noise can be
heard when refrigerant flow movement changes. It is normal.
Noise is
generated
•Crackling sound may occur during the operation of the air
conditioner, push the Zero filter to the end.
•Water may be generated because of the temperature difference. It is
Water is
dropping from normal.
the outdoor •When the humidity difference of air outlet is big, water drop may
unit piping
be formed and dripping. Therefore, do not worry about this with
connection
product malfunction.
32
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 32
2014-10-28 오후 12:00:57
Open Source Announcement
The software included in this product contains open source software. You may obtain the complete corresponding source
code for a period of three years after the last shipment of this product by sending an email to
mailto:oss.request@samsung.com.
ENGLISH
It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal
charge will be required.
The following URL http://opensource.samsung.com/opensource/Memory/seq/0 leads to the download page of the source
code made available and open source license information as related to this product. This offer is valid to anyone in receipt of
this information.
33
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 33
2014-10-28 오후 12:00:57
Installation parts
Safety precautions
Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order to
be able to use it as reference after installation.
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
WARNING
ffInstallation must be carried out by a qualified installer.
-- Do not attempt to repair, move, modify or reinstall the unit on your own since such act may cause fire, electric shock or
water leakage.
ffInstall the unit in a place where it is strong enough to hold the product weight.
-- When installed in place where it is not strong enough to withhold the product weight, the unit could fall and cause
injury.
ffThe unit should be installed in accordance with the National Electrical regulations by a qualified installer and leased
circuit must be used.
-- Lack of capacity on leased circuit or improper installation may cause electric shock or fire.
ffUse the specified wires to connect the indoor and outdoor units securely and attach the wires firmly to the terminal block
connecting sections so that the pressure is not applied to the sections.
-- Inappropriate connection and fixing could cause fire.
ffAttach the electrical cover to the indoor and outdoor unit securely without any gaps.
-- If there are any gaps, there is potential risk of fire or electric shock due to dust or water.
ffMake sure to use the part provided or specified parts for the installation work.
-- The use of defective parts could cause an injury or leakage of water due to a fire, an electric shock, the unit falling, etc.
ffMake sure that the refrigerant gas does not leak after completing the installation.
-- If the refrigerant gas comes into contact with the heating apparatus, harmful gas will be generate.
-- If the refrigerant gas of the indoor unit leaks and comes into contact with the fan heater, space heater or stove, harmful
gas will be generated.
ffEnsure that a proper ground wire is in place.
-- Do not connect the ground wire to a gas pipe, water pipe, lightning rod or telephone grounding. Defective grounding
could cause electric shock.
ffDo not install the unit in a place where it is exposed to inflammable gas leakage.
-- When leaked gas accumulates around the product, it may cause fire.
ffPerform the installation securely referring to the installation manual.
-- Incomplete installation could cause water leakage, electric shock or fire.
ffCheck first the following situations before starting the operation during the installation.
-- The pipe must be properly connected and make sure there is no leakage.
-- Service valves must be open. If compressor is operated with the service valve closed, excessive pressure may damage
parts of the compressor. If leakage occurs on any of the connections, air inflow may also cause excessive pressure that
could lead to explosion.
34
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 34
2014-10-28 오후 12:00:58
WARNING
ENGLISH
ffDo not assemble the power cord on your own, use two cables together to extend the cable length or tangle the cable.
-- Bad connection, isolation and over voltage may cause fire or electric shock.
ffMake sure to turn off the main power when setting up the indoor unit electrical circuit or power cords.
-- There is a risk of electric shock.
ffInstall a ground leakage breaker depending on the installation place.
-- If not, it may cause electric shock.
ffNever use the components and pipes for R-22 refrigerant on the models using R-410A refrigerant.
-- If the oil used for R-410A gets mixed with the mineral oil for R-22, it will get hydrolyzed and cause product damage.
CAUTION
ffCheck if the product is in good shape before the installation.
-- Do not install the product with the damage which occurred during shipment.
ffRead the installation manual thoroughly before installing the air conditioner.
ffBefore installing the air conditioner, make sure to discuss the location selection and the precautions on the installation
manual with the user.
ffPerform the drainage/piping work securely according to the installation manual.
-- If not, water could drip from the unit and household goods could get wet and damaged.
ffFasten a flare nut with a torque wrench as specified in this installation manual.
-- When fastened too tightly, a flare nut may break after a long period of time and cause refrigerant leakage.
ffWear thick gloves during the installation process.
-- If not, personal injury may occur due to the air conditioner parts.
ffBe careful not to touch the outdoor unit inlet or aluminium pins.
-- You may get personal injury.
ffDo not install the outdoor unit in a place where animals could live.
-- If an animal comes into contact with the electric parts, damage or fire may occur. In addition ask the customer to
maintain a clean installation place around it.
ffAfter completing the installation, run the trial operation. If no error occurs, explain to the customer how to use and clean
the air conditioner according to the user’s manual. In addition give the installation manual and the user’s manual to the
customer.
ffDo not open the front panel of the indoor unit during operation.
-- It may cause damage to the product.
ffCheck the product before installing it.
-- Check the unit for damage that may have taken place during transportation and do not install or use damaged
equipment.
ffAll of the manufacturing and packaging material used for your new appliance are compatible with the environment and
can be recycled.
ffThis product is an air conditioning system and contains a refrigerant that must be recovered and disposed of in an
appropriate way by qualified personnel.
-- At the end of the life cycle, take it to a proper recycling or disposal center or return it to the dealer so that it can be
disposed correctly.
❋❋ When customer claim is caused by not following above safety precaution, installer is responsible for the claim.
(Installer is responsible for the service charges.)
35
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 35
2014-10-28 오후 12:00:58
Required tools
General tools
① Vacuum pump
② Torque wrench
③ Pipe cutter
④ Reamer
⑤ Pipe bender
⑥ Spirit level
⑦ Screw driver
⑧ Spanner
⑨ Drill
⑩ L wrench
⑪ Measuring tape
Tools for test operations
① Thermometer
② Resistance meter
③ Electroscope
36
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 36
2014-10-28 오후 12:00:58
Choosing the installation location
Indoor unit
ENGLISH
ffInstall the unit at a place close to the wall facing the outside as it is necessary to perform piing connection with the
outdoor unit.
-- It is effective to install the unit at the place where air flow is not blocked and the cool air can be distributed throughout
the room.
ffInstall the unit at a place where there is no obstacle against the wind around the air intake and air outlet.
ffAvoid a place near the door which is frequently used by people.
ffAvoid a place exposed to direct sunlight. (If it is unavoidable, install a sunshade).
-- Surface of the product may get discolored.
❋❋ Install it on even ground.
• Make sure there is no abnormal operation or noise generation.
• If installed on uneven ground, water may overflow.
Outdoor unit
ffAvoid a place exposed to direct sunlight. (If it is unavoidable, install a sunshade).
ffA place free from the risk of combustible gas leakage.
ffA place which can bear the weight of the unit.
ffA place which can bear the fixing strength of the outdoor unit.
ffAvoid a place exposed to oil (including machine oil)
ffAvoid a saline place.
ffAvoid a place exposed to sulfide gas (hot spring zone).
-- When installing the unit at such special environmental conditions, it may cause trouble to the product. When it is
unavoidable, special maintenance is required.
ffA place where discharged air and noise of the outdoor unit does not disturb the neighborhood.
-- Take extra care not to cause any inconvenience to your neighbors when installing the unit on the borderline with your
neighborhood.
ffA place where strong wind does not head against the air outlet of the outdoor unit.
-- If a strong wind heads directly against the air outlet at the time of cool operation, a safety device can be operated.
❋❋ Do not install the outdoor unit on a unstable places (such as rooftop). If installation is unavoidable, make sure that you
fixed the unit firmly. Avoid places where strong wind or storm can possibly knock down the product (such as seashore or
place with frequent storm)
37
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 37
2014-10-28 오후 12:00:58
Indoor/outdoor unit installation diagram
Installation space for floor type indoor unit
ffTo minimize the waste of space due to installation, install the indoor unit as
shown in below figure.
-- Top view ❋❋ After completing the installation, remove the protection vinyl.
(Be careful of static electricity).
❋❋ After completing the installation, remove the protective
filament film on the product.
50 cm
or more
CAUTION
• Make sure that there are no obstacles (such as curtains etc.) blocking air
inlets of the indoor unit.
• Clear space on the right side of the indoor unit for possible filter
maintenance in the future.
Protection
vinyl
Piping length for indoor/outdoor unit installation
1
taclee
obs or
No or m
ffRefer to illustration on the left for maximum allowable
piping length and elevation.
ffSince product performance and lifespan may decrease as
piping length becomes longer, try to minimize the piping
length but make sure it is over 5 m.
ffSelect the installation location where you can keep the
piping bending to maximum 10 spots.
ffStated cooling performance is based on product with 5 m
piping.
m
Install S-trap for
every 6 m
CAUTION
Maximum
allowable piping
elevation 10 m
or less
6 m or
less
Maximum allowable
piping length 20 m
or less
or
cm re
30 mo
30 cm or more
Outdoor unit
Air guide
(Not provided by
manufacturer )
30 cm or
more
or
cm
60 more
• One S-trap must be installed on the low pressure
pipe up to 6 m of piping elevation. For piping
elevation that exceeds 6m, install S-trap every
6 m.
50 cm
more or
Outdoor
unit leg
Rubber leg
20 cm or more
Spare space for piping
When air guide needs to be installed to prevent the warm discharge air from
disturbing the pedestrian, refer to the illustration on the right side for installation.
38
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 38
2014-10-28 오후 12:00:58
Fixing outdoor unit
Follow below method to firmly fix the outdoor unit.
ffUsing rubber leg
-- Put the rubber leg to the outdoor unit leg. (Refer to illustration on the right.)
338 mm
ENGLISH
ffUsing anchor bolt
Anchor bolt fixing dimension
660 mm
-- On a flat, rigid ground, use 4 anchor bolt (M10) to fix the unit. (Anchor bolt should be
purchased separately.)
-- Select the anchor bolt that is long enough to securely fix the outdoor unit.
❋❋ If you need to ensure the outdoor unit from falling, use wires to fix it firmly.
• Loosen the 4 screws from the top cover of the outdoor unit.
• Put the wire around the screws and fasten the screws.
• Fix the wire on the ground.
CAUTION
• When the outdoor unit is not firmly fixed, it may fall and cause personal injury or property damage.
• When the outdoor unit is installed in water-proofed rooftop, fix the wire on the wall.
or
cm re
30 mo
30 cm or more
Outdoor unit
30 cm or
more
Air guide
(Not provided by
manufacturer )
or
cm
60 more
Outdoor
unit leg
Rubber leg
50 cm
more or
20 cm or more
Spare space for piping
Installation space for outdoor unit
Refer to following examples for wind protection.
ffWhen installing in the street with lots of buildings, install the product parallel to the street.
ffIn the places with strong wind, install the product with air outlet facing the wall.
60 cm or
more
Wall
The air intake faces towards the wall
Strong wind
Air
outlet
Rooftop
30 cm or more
30 cm or more
The air outlet faces towards the all
50 cm or
more
50 cm or
more
Spare space
for piping
30 cm or more
Spare space
for piping
60 cm or more
39
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 39
2014-10-28 오후 12:00:59
Accessories
Indoor unit accessories
Remote controller
Fixing bracket for indoor unit
Batteries
M4 x 16 screws
User & installation manual
Cleaning cloth (micro fiber)
Remote controller holder
Outdoor unit accessories
Main power cable
Indoor/outdoor unit
communication cable
Indoor/Outdoor unit power
cable
Drain connection hose
Connection pipe & Insulation
(Φ6.35 mm)
Connection pipe & Insulation
(Φ15.88 mm)
Sleeve
Service tube
Cable tie
Putty
Bushing
Finishing tape
Drain insulation tube
Rubber leg
Installation accessories
❋❋ Installation accessories may differ depending on the model.
40
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 40
2014-10-28 오후 12:01:00
Drilling a hole and fixing the indoor unit
ffDrill a hole with diameter of 60~65 mm towards the outside.
ffIf the indoor unit is installed on unstable ground, it may be shaken by an external force or children, and eventually get
knocked down. To prevent these accidents, you must fix the top or back of the indoor unit tightly with fixing brackets.
200 mm
ø60~65 mm
ENGLISH
150 mm or less
Connecting pipes
WARNING
• When installing, make sure there is no leakage. When recovering the refrigerant, stop the compressor first before
removing the connection pipe. If the refrigerant pipe is not properly connected and the compressor works
with the service valve open, the pipe inhales the air and it makes the pressure inside of the refrigerant cycle
abnormally high. It may cause explosion and injury.
Installation procedure
1. Slightly hit the hole, for piping connection, with your hands or
hammer.
Upper hole for drain
hose
410 mm
200 mm
Hole for piping
connection
Drain hose
Piping
41
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 41
2014-10-28 오후 12:01:01
Connecting pipes
2. Bend the connection pipe to an appropriate length using a bender depending upon the installation place.
3. Perform pipe bending process.
-- Perform bending of the pipe using the pipe bender which has a specified bending radius.
-- Be sure to take full care to perform bending of the pipe successfully at one time. Bending and unbending the pipe more
than twice makes the bending work increasingly difficult.
4. Connect the high pressure pipe (ø6.35 mm) and low pressure pipe (ø15.88 mm) to the high/low pressure pipe of the
outdoor unit and tightening by applying appropriate torque.
ffFlare process
1) Cut the pipe using the pipe cutter.
90°
Oblique Rough
2) Remove burr on the edge of the pipe.
• If burr is not removed after cutting the pipe, there is a risk of refrigerant
gas leakage.
• If foreign substance such as burr goes into the pipe, there is a risk of
product breakdown. Therefore, face the pipe downward when doing
the work.
Burr
Pipe
Reamer
3) Insert the flare nut into the pipe, and then perform the flare process.
Flaring tool
ffFlare length
D(mm)
H(mm)
Outer Diameter (D)
ø6.35
ø9.52
ø15.88
Height (H)
1.3 mm
1.8 mm
2.2 mm
ffIncorrectly flared pipes
Oblique
Damaged
surface
Cracked
Uneven
thickness
42
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 42
2014-10-28 오후 12:01:01
ffTightening of connection parts
Alight the pipes to be connected and tighten the flare nuts with your hands first and then with a torque wrench, tighten
it in a direction shown in below illustration.
-- You can avoid of gas leakage by applying refrigerant oil on the flare connection part.
Pipe
Flare connection part
ENGLISH
Monkey
spanner
Torque
wrench
Flare nut
Diameter(D)
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
ø19.05 mm
Torque (kgf•cm)
140~170
250~280
380~420
440~480
990~1210
CAUTION
• Apply the torque depending on the diameter and tighten it securely to make sure there is no leakage.
5. Eliminate the uncondensed gas with vacuum pump and open the service valve to put the refrigerant.
-- Make sure to perform leak test. (Refer to 'Performing leak test' on page 50.)
6. Insulate the drain hose after connecting it.
-- Insulate it correctly to avoid dew formation.
ffPipe insulation
1) Insulate the refrigerant pipes heavily with the finishing tape.
If the insulation is poor, dew may form and leak through the
indoor.
2) Use finishing tape wind up the refrigerant pipe.
3) When you bend the pipe and secure a minimum bending
radius of 100mm to prevent any distortion of the pipe.
Pipe insulation
Finishing tape
Indoor/outdoor unit
communication cable
Indoor/outdoor unit
power cable
7. Wind a finish tape when connecting refrigerant pipe, and communication cable is completed.
Indoor unit
Outdoor unit
Low pressure
pipe
High pressure
pipe
Flare nut
Valve core
Low pressure side
High pressure side
L wrench
Service port cap
Stop valve
Service port
43
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 43
2014-10-28 오후 12:01:02
Connecting drain hose
1. Slightly hit the hole, for drain hose, with your hands or hammer.
2. Insulate the drain hose with drain insulation tube and fix it with tape.
3. Direct the drain hose downward to establish natural draining.
-- Make sure to check for proper drainage after connection
CAUTION
• Fix the drain hose tightly to prevent any water leakage.
• Do not use the extended drain hose.
-- Since water may leak from the connection part, make sure that you do not extend the drain hose. However, if
extension is unavoidable due to its short length, use silicone sealant to securely seal the connection to prevent
leakage. (Do not use the insulation tape.)
Drain hose
Duct drainage
[Polypropylene(PP)]
Insulation (foamed
polyethylene)
Connection
drain hose
• Connect the drain hose through the upper hole
for drain hose.
Drain hose
410 mm
Upper hole for a drain hose
Piping
Hole for piping connection
CAUTION
• Connection with wire-concealed piping
Upper hole for
Incorrect installation
a drain hose
Drain hose (U-TRAP)
Piping
Hole for piping connection
• Make sure the U-TRAP does not occur. Water may overflow and cause property damage.
44
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 44
2014-10-28 오후 12:01:02
Electrical work
CAUTION
• The electrical work should be performed by a specialist qualified for the work.
• Avoid using multi-concent but use rate power supply for air conditioner. (Use separate power cable for outdoor
unit.)
Type
Indoor unit
Indoor power (Indoor/outdoor unit power cable)
Outdoor unit
Outdoor power (Earth leakage circuit breaker)
Power
ENGLISH
Wiring standard
ffAlways make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
ffMake sure to install exclusive power supply(purchase separately).
-- If you use multiple connecting, there is a risk of electric shock or fire.
ffIf the outdoor power supply has been selected, install circuit breaker (ELCB). (Purchased separately)
ffMake sure to connect earth wire.
1 Ph, 220~240 V, 50 Hz/60 Hz
Circuit breaker
20A
Indoor/outdoor unit power cable
1.0 mm2 or more
Outdoor unit power cable
2.5 mm2 or more
Indoor/outdoor unit communication cable
0.75 mm2 or more
Connecting procedure
1.
2.
3.
4.
After loosening the 4 screws(①) of support-inlet, disassemble the support-inlet.
Connect the housings of communication cable(②) for an indoor unit and outdoor unit.
Fix the power connection cable and communication cable with a cable clamp.
After assembling the SUPPORT-INLET and fix it with the screws(①).
Screw ①
Power terminal
SUPPORT-INLET
Earth plate
Cable clamp
COVER-PCB
Communication
cable
Power connection cable
Housing ②
45
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 45
2014-10-28 오후 12:01:02
Electrical work
Safety information on outdoor unit power supply
ffPower supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible
cord. (Code designation IEC:60245 IEC 66 / CENELEC: H07RN-F )
-- Rated voltage: 450/750V, H07RN-F (60245 IEC 66)
-- Use cable over 2.5 mm2 (Distance : 15 m or less)
Type of outdoor unit power supply
ffComply with tightening torque to make sure that the screws do not get loose.
Screw
M4
Torque
kgf•cm
N•m
12~18
1.2~1.8
Electrical parts
(Power part)
Outdoor unit
Communication
cable
L
Cabinet panel
N
Earth
OFF
Cable clamp
Earth
Indoor/outdoor unit
communication cable
Cable clamp
Earth
Power cable
Indoor/outdoor unit
power cable
• The figure of an outdoor
unit may be different
depending on models.
ffBefore connecting, compressed part of the terminal should face upward.
Installed back to front.
Compressed part
is cut.
Ring terminal is
detached.
ffAfter tightening, there should be no gap between a terminal and a screw.
-- If there is a gap, fire may occur due to the heat of electronic connection part.
Terminal is tightened
back to front.
CAUTION
A screw is not tightened firmly or there is a gap
between a screw and ring terminal.
• When connecting the cables to the outdoor unit, reversing the connection of power and communication cable
or connecting the earth wire incorrectly, electric leakage or product malfunction may occur.
• Do not cut or modify the supplied cable and install it.
• There is no front and back for the communication cable, so it can be switched.
• Use solderless ring terminal to connect the power cable to the power terminal block. If you connect stranded or
solid wires without solderless ring terminal, heat may generate from the connected part and cause fire.
46
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 46
2014-10-28 오후 12:01:03
How to connect your extended power cables
ffItems to prepare
Tools
Crimping plier
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
Spec
MH-14
20 x Ø6.5(H x OD)
Width 19 mm
70 x Ø8.0(L x OD)
1. As shown in the figure, peel off the shields from the rubber/wire of the power
Power cable(provided by us)
cable.
-- Peel off 20 mm of the wire shields of the tube installed already.
20
20
(Unit: mm)
ENGLISH
Shape
20
60
120
180
20
Power cable (provided by us)
2. Insert both sides of core wire of the power cable into the connection sleeve.
ffMethod 1
Push the core wire in to the sleeve from both sides.
Connection sleeve
CAUTION
• After peeling off the tube wire, you must insert a contraction tube.
ffMethod 2
Twist the wire cores together and push it in to the sleeve.
Connection sleeve
3. Using a compressor, compress the two points and flip it over and compress another two points in the same location.
-- The compression dimension should be 8.0.
-- After compressing it, pull both sides of the wire to make sure it is firmly pressed.
Comp. dim.
ffMethod 1
ffMethod 2
Compress it 4 times
5 mm
Compress it 4 times
5 mm
47
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 47
2014-10-28 오후 12:01:03
Electrical work
4. Wrap it with the insulation tape twice and position your contraction tube in the middle of the insulation tape.
ffMethod 1
ffMethod 2
Insulation tape
40 mm
Insulation tape
35 mm
5. Apply heat to the contraction tube to contract it.
Contraction tube
6. After tube contraction work is completed, wrap it with the insulation tape to finish.
Insulation tape
CAUTION
• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
-- Incomplete wire connections can cause electric shock or a fire.
48
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 48
2014-10-28 오후 12:01:03
Vacuum pump
Vacuuming pipe
ENGLISH
1. Completely connect the indoor/outdoor unit pipes.
2. Connect the manifold gauge to the service valve port of the low pressure side on the outdoor unit.
3. Execute vacuum pump for over 30 minutes.
-- If the pipe extension is larger, time of the vacuum pump should also get longer.
4. After degree of vacuum has been established, open the service valve ➀~➁ as shown in the illustration.
-- Use soapsuds to check for refrigerant leakage on the connection part of the pipes
Outdoor unit
F&T Condenser
Indoor unit heat
exchanger
Air flow
Sensor
EEV
Compressor
1
Service Valve
2
Service Valve
ffVacuuming air conditioner
-- Execute vacuum pump on the manifold gauge connected to low pressure side ➁, to purge the air from the pipes and
indoor unit.
49
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 49
2014-10-28 오후 12:01:03
Performing leak test
ffUse leak tester or soapsuds on the pipe connection part after performing vacuum pump.
Check for
leakage
Test part for indoor unit
Check for
leakage
Test part for outdoor unit
ffBefore inspecting the leakage, use a torque wrench to close the cap for the service valve.(Comply with a tightening
torque for each size of the diameter, and tighten the cap firmly to prevent any leakage.)
ffTo check for any possible leakage, insert inert gas into the pipes connected to indoor/outdoor units and check the
connection part of the indoor/outdoor units with soap lather or liquid for leakage test.
Tightening torque for body cap
(Refer to the table)
Spindle
Charging
core
R-22: Diameter of the screw - 7/16-20UNF
R-410A: Diameter of the screw - 1/2-20UNF
Tightening torque for charging port cap
(Refer to the table)
Tightening torque
Outer
Diameter
(mm)
Body cap
(N•m)
Ø6.35
20 ~ 25
Ø9.52
20 ~ 25
Ø12.7
25 ~ 30
Ø15.88
30 ~ 35
Ø19.05
35 ~ 40
Charging port cap
(N•m)
10 ~ 12
❋❋ 1 N•m = 10 kgf•cm
50
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 50
2014-10-28 오후 12:01:04
Installing the earth wire
Earthing must be done by the installation specialist for your safety.
ffConnect grounding electrode and the air conditioner.
1. Connect the manifold gauge in the low pressure side (gas) and press Set/Cancel, Mode, Temp + button simultaneously
for 5 seconds to enter the refrigerant charging mode. When the outdoor unit operates, charge the refrigerant.
2. Charge the refrigerant depending on the pipe length.
-- If the installed pipe length exceeds standard length (5 m), you must add 30g of refrigerant (R-410A) for every 1 m.
-- You do not need to charge the additional refrigerant when pipe length is less than 5 m.
ENGLISH
Charging refrigerant
Manifold gauge
Gas side
Liquid side
Refrigerant
Electronic scale
3. After charging the refrigerant, disconnect the manifold gauge from the service port and close the service cap.
4. Deactivate the refrigerant charging mode by pressing Set/Cancel, Mode, Temp + button simultaneously for 5 seconds.
CAUTION
• Make sure to charge refrigerant with accurate amount by using the electronic scale.
51
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 51
2014-10-28 오후 12:01:04
Check and test operation
1. Supply power to the air conditioner.
2. Turn on the air conditioner.
3. While pressing and holding the Set/Cancel button on the remote controller, press the Power button for 3 seconds to
display the temperature of indoor heat exchanger.
-- Write down the displayed temperature.
4. Press the Turbo button on the remote controller to operate in turbo mode for 10 minutes.
5. Check if the indoor unit is operating normally.
-- Standard condition to judge normal operation. (Indoor/outdoor unit over 21 °C, operate in Cool mode for over 10
minute)
6. While pressing and holding the Set/Cancel button on the remote controller, press the Power button for 3 seconds to
display the temperature of indoor heat exchanger.
-- If the displayed temperature differs over 10 °C from the temperature written down previously, it is operating normally.
7. When checking above step 1~6 is done, tell the user how to use the air conditioner.
Pump down procedure (When removing the product)
1. Press the Power button on the indoor unit control panel for 5 seconds to enter the Pump down mode and operate
the compressor for over 5 minutes. Or, Press the Set/Cancel, Mode and Temp - button on the remote controller
simultaneously to enter the Pump down mode and operate the compressor for over 5 minutes.
2. Remove the High/Low pressure side valve cap.
3. Use the L wrench to completely close the valve on the high pressure side.
4. After 2 minutes, completely close the valve on the low pressure side.
5. Press the Power button on the indoor unit control panel for 5 seconds to deactivate the Pump down mode. Or, Press
the Set/Cancel, Mode and Temp - button on the remote controller simultaneously to deactivate the Pump down mode.
6. Disconnect the pipe.
52
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 52
2014-10-28 오후 12:01:04
MEMO
ENGLISH
53
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 53
2014-10-28 오후 12:01:04
MEMO
54
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 54
2014-10-28 오후 12:01:04
MEMO
ENGLISH
55
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 55
2014-10-28 오후 12:01:04