Delfield 8100-EF Specifications

N8000, N8100B, N8100-FA, 8100-EF, N8200,
N8200G, N8600, N8700-D, N8800 Drop Ins
Service, Installation and Care Manual
Please read this manual completely before attempting to install or operate this equipment! Notify carrier of
damage! Inspect all components immediately. See page 2.
Hot Food Wells, Cold Pans, Frost tops and
Hot/Cold Food Wells
TION
A
M
R
O
T INF
N
A
T
R
O
USE
IMP
E
R
O
F
E
ONS!
I
T
C
READ B
U
R
INST
E
S
E
H
T
AVE
S
E
S
A
Effective Date August 2006
E
PL
N8000 Series Drop-In Installation and Operation Manual
Contents
RECEIVING AND INSPECTING UNIT................................... 2
MECHANICAL DATA.......................................................... 3-5
INSTALLATION
N8000, N8000N, N8100B, N8100NB, N8200, N8200G,
8100-FA, 8100-EF Series..................................................... 6
N8700D, N8700N, & N8800 Series...................................... 6
N8600 Series........................................................................ 7
OPERATION
N8100B, N8100NB............................................................... 7
N8100-FA............................................................................. 8
N8200 & N8200G................................................................. 8
N8700D, N8700N, & N8800 Series................................... 8-9
8100-EF................................................................................ 9
N8600................................................................................. 10
ROUTINE MAINTENANCE.................................................. 10
UNIT ASSEMBLY N8100-FA............................................... 11
WIRING DIAGRAM
N8100-FA........................................................................... 11
N8100B, N8100NB, N8200, N8200G & N8800.................. 12
N8700N & N8700D............................................................. 13
N8600............................................................................ 14-15
8100-EF & 8100-EFN......................................................... 16
LOUVER DIAGRAM............................................................. 17
MISC PARTS........................................................................ 17
N8100-FA REPLACEMENT PARTS LIST............................ 18
CONDENSING UNIT ASSEMBLY PARTS LIST............. 19-22
FOOD WELL ASSEMBLY PARTS LIST......................... 23-25
STANDARD WARRANTIES............................................ 26-27
Serial Number Location
The serial number on self-contained refrigerated units is on
the electrical specifications tag located near the condensing
unit.
The serial number on remote refrigerated units is on the
outside bottom of the food well.
On hot food pans and hot/cold combination pans, the serial
number tag is located on the back of the control raceway or
remote panel.
The serial number tag also lists the refrigerant used and the
amount of charge.
Always have the serial number of your unit available when
calling for parts or service.
This manual covers only standard 8000 series units. If
you have a custom designed unit, you should contact our
parts/service department for questions.
©2006 The Delfield Company. All rights reserved. Reproduction without written
permission is prohibited. “Delfield” is a registered trademark of The Delfield
Company.
Receiving and Inspecting the Equipment
Even though most equipment is shipped crated, care should
be taken during unloading so the equipment is not damaged
while being moved into the building.
1. Visually inspect the exterior of the package and skid or
container. Any damage should be noted and reported to
the delivering carrier immediately.
2. If damaged, open and inspect the contents with the
carrier.
3. In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally as
well as in written form.
4. Request an inspection by the shipping company of the
damaged equipment. This should be done within 10 days
from receipt of the equipment.
5. Also open the compressor compartment housing and
visually inspect the refrigeration package. Be sure lines
are secure and base is still intact.
6. Freight carriers can supply the necessary damage forms
upon request.
7. Retain all crating material until an inspection has been
made or waived.
Uncrating the Equipment
First cut and remove the banding from around the crate.
Remove the front of the crate material, use of some tools will
be required.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
N8000
N8000Series
SeriesIce
IceCooled
CooledCold
ColdPans
Pans
MODEL NUMBER L
D
H
counter CUTOUT
DIMENSIONS (D x L)
# OF 12” X 20”
PANS HELD
SHIPPING
WEIGHT
N8018
18”
(45.7cm)
26”
(66cm)
10.75
(27.3cm)
17” x 25”
1
(43.2cm x 63.5cm)
37 lbs
(17 kg)
N8030
30.75”
(78.1cm)
26”
(66cm)
10.75
(27.3cm)
29.75” x 25”
2
(75.6cm x 63.5cm)
100 lbs
(45 kg)
N8043
43.5”
(110.5cm)
26”
(66cm)
10.75
(27.3cm)
42.50” x 25”
3
(107.9cm x 63.5cm)
118 lbs
(53 kg)
N8056
56.25”
(142.9cm)
26”
(66cm)
10.75
(27.3cm)
55.25” x 25”
4
(140.3cm x 63.5cm)
145 lbs
(65 kg)
N8069
69”
(175.3cm)
26”
(66cm)
10.75
(27.3cm)
68” x 25”
5
(172.7cm x 63.5cm)
164 lbs
(74 kg)
N8081
81.75”
(208cm)
26”
(66cm)
10.75
(27.3cm)
80.75” x 25”
6
(205.1cm x 63.5cm)
190 lbs
(86 kg)
N8000N Series Ice Cooled Cold Pans - narrow line
MODEL NUMBER L
D
H
counter CUTOUT
DIMENSIONS (D x L)
# OF 12” X 20”
PANS HELD
SHIPPING
WEIGHT
N8046N
46.75”
(118.75 cm)
18.0”
(45.72cm)
10.75”
(27.3cm)
17” x 45.75”
2
(43.18 cm x 116.20 cm)
100 lbs
(46 kg)
N8068N
67.5”
(171.5cm)
18”
(45.72cm)
10.75”
(27.3cm)
17” x 66.50”
3
(43.18 cm x 168.91 cm)
120 lbs
(55 kg)
N8100B Series Self-Contained Refrigerated Cold pans (Bloomington Style) Ref. R134A
MODEL NUMBER L
D
H
COUNTER CUTOUT
DIMENSIONS (D x L)
# OF 12” x 20” VOLTAGE
PANS HELD HERTZ/PHASE H.P. AMPS
BTU
LOAD
SYS. SHIPPING REF
CAP. WEIGHT CHARGE
N8118B
18”
26”
21.87”
(45.7cm) (66.04cm) (55.5cm)
115/60/1
17” X 25”
1
1/5 4.0
204
708
(43.2cm x 63.5cm)
103 lbs
(46 kg)
8.0oz
N8130B
30.75”
26”
21.87”
(78.1cm) (66.04cm) (55.5cm)
29.75” x 25”
2
115/60/1
1/5 4.0
379
812
(75.6cm x 63.5cm)
161 lbs
(72 kg)
8.0oz
N8143B
115/60/1
43.5”
26”
21.87”
42.50” X 25”
3
1/5 4.0
569
889
(110.5cm) (66.04cm) (55.5cm) (108.58cm x 63.5cm)
184 lbs
(83 kg)
8.0oz
N8156B
56.25”
26”
21.87”
(142.9cm) (66.04cm) (55.5cm)
55.25” x 25”
4
115/60/1
1/4 7.0
758
1373 233 lbs
(140.3cm x 63.5cm)
(105 kg)
16.0oz
N8169B
69”
26”
21.87”
(175.3cm) (66.04cm) (55.5cm)
68” X 25”
5
115/60/1
1/4 7.0
948
1469 243 lbs
(172.7cm x 63.5cm)
(109 kg)
16.0oz
N8181B
81.75”
26”
21.87”
(208cm) (66.04cm) (55.5cm)
80.75” x 25”
6
115/60/1
1/3 8.0
1138
1921 260 lbs 12.0 oz
(205.1cm x 63.5cm)
(117 kg)
* NEMA plug configuration 5-15P
N8100NB Series Self Contained Refrigerated Cold pans (Bloominton Style Narrow) Ref. R134A
MODEL NUMBER L
H
D
COUNTER CUTOUT # OF 12” x 20” VOLTAGE
DIMENSIONS (D x L) PANS HELD HERTZ/PHASE H.P. AMPS
BTU
LOAD
SYS. SHIPPING
CAP. WEIGHT
REF.
CHARGE
115/60/1 1/5 4.0
46.75”
18”
21.81”
17” X 45.75”
2
454 680 175 lbs
N8146NB
(118.7cm) (45.7cm) (55.4cm) (43.2cm x 113.7cm)
(80 kg)
8.0oz
N8168NB
12.0oz
67.5”
18”
21.81”
17” x 66.5”
3
115/60/1 1/5 4.0
676 804 240 lbs
(171.5cm) (45.7cm) (55.4cm) (43.2cm x 168.9cm)
(109 kg)
* NEMA plug configuration 5-15P
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
N8100-FA Series Air Curtain Cold Pans-R404A
MODEL
NUMBER
COUNTER CUTOUT
DIMENSIONS
LOUVER CUTOUT
DIMENSIONS
VOLTZ/HERTZ
PHASE
SHIP
WEIGHT
H.P.
AMP
BTU
REFRIG.
CHARGE
N8131-FA
30.2” x 25.5”
22” (55.8cm) x 11” (27.9cm)
115/60/1
165
N8144-FA
42.95” x 25.5”
22” (55.8cm) x 11” (27.9cm)
115/60/1
175
1/4
8.0
2154
16.0 oz.
1/2
10.0
3142
32.0 oz.
N8157-FA
55.7” x 25.5”
22” (55.8cm) x 11” (27.9cm)
115/60/1
N8169-FA
68.45” x 25.5”
22” (55.8cm) x 11” (27.9cm)
115/60/1
225
1/2
10.0
3806
32.0 oz.
235
3/4
15.0
5545
48.0 oz.
N8182-FA
81.2” x 25.5”
22” (55.8cm) x 11” (27.9cm)
115/60/1
255
3/4
15.0
5545
48.0 oz.
Tops
N8200 Series Self-Contained Frost Tops-R404A
MODEL NUMBER L
D
H
COUNTER CUTOUT
DIMENSIONS
VOLTS/HERTZ/
PHASE
H.P.
AMPS
SHIP
WEIGHT
REF.
CHARGE
N8231
31.75" (80.6cm) 26”(66cm)
15.75” (40cm)
30.75” x 25" (78.1cm x 63.5cm)
115/60/1
1/4
7.0
170 lbs (77 kg)
12.0oz
N8245
45.62” (115.9cm) 26”(66cm)
15.75” (40cm)
44.63” x 25” (113.3cm x 63.5cm)
115/60/1 1/4
7.0
185 lbs (83 kg)
12.0oz
N8259
59.5” (151.1cm)
26”(66cm)
15.75” (40cm)
58.50” x 25” (148.59cm x 63.5cm)
115/60/1
1/4
7.0
213 lbs( 96 kg)
12.0oz
N8273
73.37" (186.4cm) 26”(66cm)
15.75” (40cm)
72.38” x 25” (183.84cm x 63.5cm)
115/60/1
1/3
8.0
218 lbs (98 kg)
24.0oz
N8287
87.25" (221.6cm)
26”(66cm)
15.75” (40cm)
86.25" x 25" (219.07cm x 63.5cm)
115/60/1
1/3
8.0
224 lbs (101 kg)
24.0oz
* NEMA plug configuration 5-15P
Tops
N8200G Series Self Contained Granite Frost Tops-R404A
MODEL NUMBER L
D
H
COUNTER CUTOUT
DIMENSIONS
VOLTS/HERTZ/
PHASE
H.P.
AMPS
SHIP
WEIGHT
REF
CHARGE
N8231G 31.75” (80.6cm) 25.87”(65.7cm) 19” (48.3cm) 30.75” X 25” (78.10cm x 63.5cm)
115/60/1
1/4
7.0
219lbs.
12.0 oz
N8245G 45.62” (115.9cm) 25.87”(65.7cm) 19” (48.3cm) 44.63” x 25” (113.36cm x 63.5cm)
115/60/1 1/4
7.0
284lbs.
12.0 oz
N8259G 59.5” (151.1cm) 25.87”(65.7cm) 19” (48.3cm) 58.5” x 25” (148.6cm x 63.5cm)
115/60/1
1/3
8.0
338lbs.
24.0 oz
N8273G 73.37” (186.4cm) 25.87”(65.7cm) 19” (48.3cm) 72.38” x 25” (183.84cm x 63.5cm)
115/60/1
1/2
9.0
425lbs.
32.0 oz.
AMPS
SHIP
WEIGHT
REF
CHARGE
1/4
24.0
164 lbs (81 kg)
16.0 oz
16.0 oz
* NEMA plug configuration 5-15P
N8600 Series Self Contained Combination Hot/Cold Food Wells
Wells-R404A
MODEL NUMBER L
D
H
COUNTER CUTOUT
DIMENSIONS
# OF VOLTS/HERTZ/
PANS
PHASE
H.P.
N8630
30.75” (78.1cm) 26”(66cm) 23.75” (60.3cm) 29.75” X 25” (75.5cm x 63.5cm)
2
N8643
120/60/1
43.5” (110.5cm) 26”(66cm) 23.75” (60.3cm) 42.50” x 25” (107.9cm x 63.5cm)
3
120/208 or 120/240 1/4
21.0
198 lbs (95 kg)
N8656 56.25” (142.9cm) 26”(66cm) 23.75” (60.3cm) 55.25” x 25” (140.3cm x 63.5cm)
4
120/208 or 120/240
1/4
21.0
233 lbs (113 kg) 16.0 oz
N8669
5
120/208 or 120/240
1/4
43.0
266 lbs (102 kg) 24.0 oz
6
120/208 or 120/240
1/3
43.0
301 lbs (136 kg) 24.0 oz
69” (175.3cm)
26”(66cm) 23.75” (60.3cm)
68” x 25” (172.7cm x 63.5cm)
N8681 81.75” (207.6cm) 26”(66cm) 23.75” (60.3cm) 80.75” x 25” (205.1cm x 63.5cm)
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
N8700D Series Individually Controlled Electric Hot Food Wells
MODEL NUMBER L
D
H
N8717-D 17.88” (45.4cm) 26.00 (66cm) 9.5” (24cm)*
N8731-D 31.75” (80.6cm) 26.00 (66cm) 9.5” (24cm)*
N8745-D 45.63” (115.9cm) 26.00 (66cm) 9.5” (24cm)*
N8759-D 59.5” (151.1cm) 26.00 (66cm) 9.5” (24cm)*
N8773-D 73.38” (186.4cm) 26.00 (66cm) 9.5” (24cm)*
N8787-D 87.25” (221.4cm) 26.00 (66cm) 9.5” (24cm)*
*14” Overall to drain connection
COUNTER CUTOUT
DIMENSIONS
CONTROL PANEL
CUTOUT DIMENSIONS
# OF WELLS
VOLTS/HERTZ/
PHASE
AMPS
SHIP
WEIGHT
16.88” X 25”
(42.87cm x 63.5cm)
30.75” x 25” (78.10cm x 63.5cm)
44.63” x 25” (113.36cm x 63.5cm)
58.5” x 25” (148.59cm x 63.5cm)
72.38” x 25”
(183.84cm x 63.5cm)
86.25” x 25”
(219.07cm x 63.5cm)
4.62” x 7” (11.7cm x 17.8cm)
4.62” x 10.31” (11.7cm x 26.2cm)
4.62” x 14.5” (11.7cm x 36.8cm)
4.62” x 18.69” (11.7cm x 47.5cm)
4.62” x 22.88” (11.7cm x 58.1cm)
4.62” x 27”
(11.7cm x 68.6cm)
1
120/60/1
8.3
39 lbs (17 kg)
2
120/60/1
16.7
119 lbs (54 kg)
3
208-230/60/1 14.4/15.9 150 lbs (68 kg)
4
208-230/60/1 19.2/21.3 170 lbs (77 kg)
5
208-230/60/1 24.0/26.6 196 lbs (88 kg)
6
208-230/60/1 28.8/31.9232 lbs (104 kg)
N8700N Series Individually Controlled Electric Hot Food Wells (with remote control)
MODEL NUMBER L
D
H
COUNTER CUTOUT DIMENSIONS (DXL)
CONTROL PANEL
CUTOUT DIMENSIONS
# OF FOOD WELLS
VOLTAGE
HERTZ/PHASE AMPS
SHIPPING
WEIGHT
N8746N
45.61”
(116cm)
15.87” (40cm)
9.5” (24cm)
15” X 44.61”
4.62” X 10.31”
2
120/60/1 16.7
(38.1 cm X 113.3 cm) (11.7 cm x 26.19 cm)
100 lbs
(46 kg)
N8768N
67.48”
(172cm)
15.87”
(40cm)
9.5”
(24cm)
15.” X 66.48”
4.62” x 14.50”
3
208-230/60/1 14.4/
15.9
(38.1 cm X 169 cm) (11.7 cm x 36.83 cm)
130 lbs
(59 kg)
N8800 Series Single Tank Electric Hot Food Wells (with remote control)
MODEL NUMBER
A
D
H
COUNTER CUTOUT
DIMENSIONS
# OF 12” X 20” VOLTS/HERTZ/
PANS HELD
PHASE
AMPS
SHIP
WEIGHT
16.7
124lbs(56kg)
N8831
31.75” (80.6cm)
26” (66cm) 11” (27.9cm)
30.75” X 25” (78.10cm x 63.5cm)
2
N8845
45.63” (115.9cm)
26” (66cm) 11” (27.9cm)
44.63” x 25” (113.36cm x 63.5cm)
3
208-230/60/1 14.4/15.9 150lbs(68kg)
N8859
59.5” (151.1cm)
26” (66cm) 11” (27.9cm)
58.5” x 25” (148.59cm x 63.5cm)
4
208-230/60/1 19.2/21.3 189lbs(85kg)
N8873
73.38” (186.4cm)
26” (66cm) 11” (27.9cm)
72.38” x 25” (183.84cm x 63.5cm)
5
208-230/60/1 24.0/26.6 200lbs(91kg)
N8887
87.25 (221.6cm)
26” (66cm) 11” (27.9cm)
86.25” x 25” (219.07cm x 63.5cm)
6
208-230/60/1 28.8/31.3 226lbs(102kg)
120/60/1
8100-EF Series LiquiTec® Cold Pans-R404A
MODEL
NUMBER
COUNTER
CUTOUT DIMENSIONS
LOUVER CUTOUT VOLTZ/HERTZ
REMOTE SHIP WEIGHT REFRIG.
DIMENSIONS
PHASE
AMPS H.P.
BTU
LBS
CHARGE
8118-EF
17.5” x 25.2” (44.45cm x 64cm)22” x 11”
115/60/1
7.0
1/4292200/9124.0 oz.
8132-EF
31” x 25.2” (78.74cm x 64cm)22” x 11”
115/60/1
7.0
1/4
379225/10224.0 oz.
8145-EF
44.5” x 25.2” (113cm x 64cm)22” x 11”
115/60/1
7.0
1/4
569235/10724.0 oz.
8159-EF
58” x 25.2” (147.3cm x 64cm)22” x 11”
115/60/1
7.0
1/4
758285/13024.0 oz.
8172-EF
71.5” x 25.2” (181.6cm x 64cm)22” x 11”
115/60/1
7.0
1/4
948295/13424.0 oz.
8186-EF
85.2” x 25.2” (216.4cm x 64cm)22” x 11”
115/60/1
7.0
1/4
1138
SLIM LINE MODELS
MODEL
COUNTER
NUMBER
CUTOUT DIMENSIONS
LOUVER CUTOUT VOLTZ/HERTZ
DIMENSIONS
PHASE
AMPS H.P.
NEMA
PLUG
306/13924.0 oz.
SHIP WEIGHT REFRIG.
LBS/KG
CHARGE
8148-EFN
44.5” x 25.2” (113cm x 64cm)22” x 11”
115/60/1
7.0
1/4
5-15P235/10724.0 oz.
8169-EFN
58” x 25.2” (147.3cm x 64cm)22” x 11”
115/60/1
7.0
1/4
5-15P285/13024.0 oz.
8191-EFN 71.5” x 25.2” (181.6cm x 64cm)22” x 11”
115/60/1
7.0
1/4
5-15P295/13424.0 oz.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Installation N8000, N8000N, N8100B, N8100NB, N8200, N8200G, N8100-FA & 8100-EF Series
Drop In Procedure
These units are intended for indoor use only. A room
temperature of not more than 86°F (30°C) is recommended.
Reinforce the counter as necessary to provide maximum
loading.
CAUTION
Some N8000, N8000N, N8100B and N8100NB
may have poyethylene insulation in the drain
hole. This can easily be cut out without
any contact or damage to the units interior
insulation or refrigeration lines.
Unit requires that the sides and bottom are not
any closer than 3” to any combustible material.
DANGER
The counter cut-out sizes and power requirements are shown
on pages 3-5. A gasket is installed in the flange of each unit.
The weight of the unit on the gasket forms a seal preventing
liquids from seeping into the cut-out opening.
Louvers
Self-contained refrigerated units (N8100, N8200 and N8200G
Series) require airflow to the compressor. A 13” x 25” louver
is (33 cm x63.5 cm) provided by Delfield and must be installed
in the counter in front of the condenser. See specifications on
page 3 for louver cutout dimensions. The rear must have an
opening to permit removal of heated air. The opening must be
at least 8” x 11”, a total of 88 square inches (20.3 cm x 27.9 cm,
a total of 566 square centimeters).
Moisture collecting from improper drainage
can create a slippery surface on the floor
and a hazard to employees. It is the owner’s
responsibility to provide a container or outlet
for drainage.
Electrical connection
Refer to the amperage data on pages 3-5, the serial tag or
your local code to be sure the unit is connected to the proper
power source. A protected circuit of the correct voltage and
amperage must be run for con­nec­tion of the line cord.
Some units have an “ON/OFF” switch located behind the
louvered panel in the machine compartment. Simply turn the
switch to “ON” to begin operation.
Some units have an “OFF” position on the switch which is
located behind the louvered panel in the machine compartment. Simply turn the dial to begin operation.
Plumbing
The unit must be disconnected from the
power source whenever performing service or
maintenance functions.
The unit’s drain must have an outlet to an appropriate drainage
area or container. N8200 series have 1/2” drain and N8200G
series have 3/4” drain located on end/center. The 1” diameter
drain on N8000, N8100, 8100FA and 8100EF Series units is
shipped loose and must be connected during installation.
Never operate the unit without the louvered
panel in place!
Installation N8700D, N8700N, & N8800 Series
Drop In Procedure
These units are intended for indoor use only. Reinforce the
counter as necessary to provide maximum loading.
Unit requires that the sides and bottom are not
any closer than 3” to any combustible material.
DANGER
The counter cut-out sizes and power requirements are shown
on pages 3-5. A gasket is installed in the flange of each unit.
The weight of the unit on the gasket forms a seal preventing
liquids from seeping into the cut-out opening.
N8700-D Series pans should be installed with the drains at the
back, away from the operator’s sides. N8700N Series have
drains located in the front - operator side.
The controls on N8700-D and N8800 Series units are mounted
in a control panel, designed to be installed at a “remote”
location. The control panel should be installed so that the
indicator light for each control is above the control. N8700 &
N8700N Series units have 48” (121.9cm) of conduit and N8800
Series units have 24” (61.0cm) of conduit between the pans and
the remote control panel to facilitate this installation.
Plumbing
N8700-D and N8700N Plumbing: Unit is equipped with 1/2”
drains, (one per well located in right rear corner 1/2” female
N.P.T.) manifold and 1/2” gate valve.
N8800 Plumbing: Well is sloped to a 1.00” female N.P.T.
stainless steel drain.
CAUTION
Moisture collecting from improper drainage
can create a slippery surface on the floor
and a hazard to employees. It is the owner’s
and operator’s responsibility to provide a
container or outlet for drainage.
Electrical connection
Refer to the amperage data on pages 3-5, the serial tag or
your local code to be sure the unit is connected to the proper
power source.
The unit must be disconnected from the
power source whenever performing service
or maintenance functions.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Installation N8600
Drop In Procedure
These units are intended for indoor use only. A room
temperature of not more than 86°F (30°C) is recommended.
Reinforce the counter as necessary to provide for maximum
loading.
Unit requires that the sides and bottom are not
any closer than 3” to any combustible material.
DANGER
The counter cut-out sizes and power requirements are shown
on pages 3-5. A gasket is installed in the flange of each unit.
The weight of the unit on the gasket forms a seal preventing
liquids from seeping into the cut-out opening.
The cut-out dimensions for the control box on N8600 Series
units is 4.25” x 12.25” (10.8 cm x 31.1 cm).
Louvers
For proper refrigerated operation, N8600 Series units require
airflow to the compressor. A 13” x 25” louver is (33.0 cm x
63.5 cm) is provided by Delfield and must be installed in the
counter in front of the condenser. See page 3 & 4 for louver
cut-out dimensions. The rear must have an opening to permit
removal of heated air. The opening must be at least 8” x 11”,
a total of 88 square inches (20.3 cm x 27.9 cm, a total of 566
square centimeters).
Plumbing
The unit’s 1” drain must have an outlet to an appropriate
drainage area or container.
CAUTION
Moisture collecting from improper drainage
can create a slippery surface on the floor
and a hazard to employees. It is the owner’s
and operator’s responsibility to provide a
container or outlet for drainage.
Electrical connection
Refer to the amperage data on page 3-5, the serial tag or your
local code to be sure the unit is connected to the proper power
source.
The unit must be disconnected from the
power source whenever performing service or
maintenance functions.
Never operate the unit without the louvered
panel in place!
Operation - N8100N, N8100NB
N8100 Series cold pans are adjusted at the factory to provide
satisfactory operation without any further adjustments. However, if it is necessary to adjust the temperature, the control is
located in the machine compartment. Turn the knob clockwise
as indicated on the control. Settings are from 1 thru 7 (7 being
the coldest). Adjustments should be made gradually. Several
small adjustments will be more effective than one large adjustment. It may take an hour or longer to realize the temperature
change depending on the application and location of the unit.
These units are not designed to cool warm food products.
Items should be placed in the unit pre-cooled at least to the
desired holding temperature, if not slightly colder. In some
applications, a gradual warming of product may occur, particularly at the exposed top of the product. Stirring or rotation of
the product may be necessary to maintain overall temperature.
Warming of food product can occur very quickly outside of the
unit. When loading or rotating product, avoid leaving food items
in a non-refrigerated location for any length of time to prevent
warming or spoilage.
The temperature control is used to turn the unit on and off as
well as control the temperature of the cold pan. The settings
range from 1 through 7 (7 being the coldest). To turn the cold
pan off, turn the knob to the off position.
If the cold pan is to be used with ice, it is recommended that
the optional perforated bottoms be used. These will allow ice to
melt properly.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
AND#40."3ERIES3ERVICEAND)NSTALLATION-ANUAL
2%&2)'%2!.4#(!2'%3!.$02%3352%#/.42/,3%44).'3
2EFRIGERANT#HARGES&OR3ERIES5NITS
N8000 Series Drop-In Installation
and Operation Manual
04"OZ
04"OZ
04"OZ
04"OZ
All Delfield refrigerated models come equipped
with 115-volt, 60
04"OZ
OZ
cycle, single phase refrigeration units. 04"
The refrigeration
valves-
Operation -N8100-FA
"5# OZ
"5# OZ
2UBY4UESDAY3ALAD"AR3ERVICEAND)NSTALLATION-ANUAL
"5# OZ
"5# OZ
$%&2/344)-%2
Defrost
Timer
"5# OZ
Every
4 hours
for 20 minutes.
"5#
OZ
are open and ready to operate as soon as the power supply
2EFRIGERANT#HARGES&OR#40."3ERIES5NITS
cord is plugged into the standard 115-volt,
grounded electrical
outlet.
#40." OZ
Pressure Control
#40." OZ
#40." OZ
The temperature is controlled by an adjustable pressure control
located in the machine compartment.
and adjustable control has the
02%3352%#/.42/,3%44).'3
word COLDER near the knob, with an arrow to indicate the adjustment
direction. These controls are0RESSURE#ONTROL3ETTINGS
field adjustable and do not require a ser4HEFACTORYRECOMMENDEDLOWPRESSURECONTROLSETTINGSFOR04"SARECUTINANDCUTOUTTOMAINTAIN
vice agent. If you have any questions,
feel fre to contact the Delfield
PROPERTEMPERATUREFORPRODUCTINTHERAIL4HEINTERIORTEMPERATUREISCONTROLLEDBYTHETHERMOSTATMOUNTEDONTHE
Service Department.
EVAPORATORCOILHOUSING
4HEFACTORYRECOMMENDEDLOWPRESSURECONTROLSETTINGSFOR"5#SARECUTINANDCUTOUTTOMAINTAIN
PROPERTEMPERATURE
In attempting to
adjust the pressure control, you can
do damage to the unit by accidentally adjusting the
differential. Please
make small incremental adjust!LL$ELFIELDREFRIGERATEDMODELSCOMEEQUIPPEDWITH
VOLTCYCLESINGLEPHASEREFRIGERATIONUNITS4HE
ments if a temperature
adjustment is necessary,
REFRIGERATIONVALVESAREOPENANDREADYTOOPERATEASSOON
please contactASTHEPOWERSUPPLYCORDISPLUGGEDINTOTHESTANDARD
the service department at Delfield
(800) 733-8821VOLTGROUNDEDELECTRICALOUTLET
or your local servic agent. Delfield is
not responsible
for charges incurred while having
0RESSURE#ONTROL
4HETEMPERATUREISCONTROLLEDBYANADJUSTABLEPRESSURE
the pressure control
adjusted.
CONTROLLOCATEDINTHEMACHINECOMPARTMENT!NADJUSTABLE
CONTROLHASTHEWORD#/,$%2NEARTHEKNOBWITHANARROW
TOINDICATETHEADJUSTMENTDIRECTION4HESECONTROLSARE
Food in the N8100-FA
pans should not be
FIELDADJUSTABLEANDDONOTREQUIREASERVICEAGENT)FYOU
loaded in such
a way as to interfere with the air
HAVEANYQUESTIONSFEELFREETOCONTACTTHE$ELFIELD3ERVICE
$EPARTMENT
curtain flowing
over the cold pans.
) NATTEMPTINGTOADJUSTTHEPRESSURECONTROL
YOUCANDODAMAGETOYOURUNITBYACCIDENTALLY
ADJUSTINGTHEDIFFERENTIAL0LEASEMAKESMALL
INCREMENTALADJUSTMENTSIFATEMPERATURE
ADJUSTMENTISNECESSARYPLEASECONTACTTHE
SERVICEDEPARTMENTAT$ELFIELD
ORYOURLOCALSERVICEAGENT$ELFIELDISNOT
tops
are designed to maintain an
RESPONSIBLEFORCHARGESINCURREDWHILEHAVING
THEPRESSURECONTROLADJUSTED
Operation - N8200, N8200G
17 differential
25 cut-in, 8 cut-out
&ORCUSTOMERSERVICECALL&AXWWWDELlELDCOM
Since it takes some time for the frost to accumulate initially, the
N8200 & N8200G Series frost
unit should be turned on approximately one hour before it is
even layer of frost to pleasantly display product. Once turned
actually required. Product should not be placed on the frost top
on, the compressor will run continuously. The unit should be
prior to turning the unit on,ELDCOM
because
it may freeze to the surface
&ORCUSTOMERSERVICECALL&AXWWWDELl
turned off overnight or when not in use. There is no
temperaof
the
unit.
ture control on the N8200 series. The ON/OFF switch is the
only means available to cycle the unit.
Operation N8700D, N8700N & N8800 Series
These units are designed to hold warm food product between
140˚F to 160˚F (60˚C to 71˚C).
N8700D, and N8700N Series individually heated hot food
units may be operated “wet” (with water in the wells) or “dry”.
However, “wet” operation is usually recommended for better
performance.
N8800 Series single tank hot food units are designed to be
operated “wet” (with water in the tank) only.
Proper water level (approximately two inches) must be
maintained to prevent damage to the tank on the N8800 Series
units.
After the unit is hard wired to the electrical system, select
desired temperature by rotating temperature control. A knob
and indicator light are provided for each individual heated food
well.
First Time Use
Before the unit is used the first time for serving, turn the
temperature knob to “HI” and heat the well for 20 to 30 minutes.
Any residue or dust that adhered to the heater element(s) will
be burned off during this initial preheat period.
When serving thick sauces always use the hot food well in “wet”
operation. This provides more uniform temperature for the
sauce.
Never place food directly in well. Always use
pans.
For most efficient operation, keep covered inserts in each well
during preheating or when empty.
Always place covers on pans when not serving to prevent food
from drying out.
If the same temperature settings for each well are used
everyday, the temperature knobs can be left in their set position
and the wells can be turned off by using the ON/OFF switch at
the end of the control panel.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
2EFRIGERANT#HARGES&OR3ERIES5NITS
04"OZ
"5# OZ
Drop-In
Installation and Operation Manual
04"OZN8000 Series
"5#
OZ
04"
OZ
"5# OZ
Operation
N8700D,
N8700N & N8800 Series
04"OZ
"5# OZ
Wet Operation
04"OZ Dry Operation
"5# N8700
OZ
Series only
Fill the food well with a minimum of 2” of water and cover
is usually
much more efficient and is usually
04"OZ Wet operation
"5#
OZ
with lid or empty pan. To preheat water, set temperature
preferred. However, these units may be operated without water
control at “HI”. With pans in place, wells will boil water. Food
with no damage to the unit.
temperature will vary depending on type and amount of product.
To minimize
steam and water usage, set control at lowest
2EFRIGERANT#HARGES&OR#40."3ERIES5NITS
When operated dry, the bottom of the well will discolor. To
setting that will maintain proper food temperature. To reduce
clean, use a stainless steel cleaner or mild abrasive.
preheating time,
use hot water
to fill the well.
#40."
OZ
The dry well should never be preheated longer
than 15 minutes. Only 6” deep pans should be
used with dry food well.
#40."
OZ
When operating
these units “wet,” never use
#40."
OZ
anything other
than plain water in the wells
or tank. Failure to observe this warning may
result in personal injury or damage to the unit.
When operated at the highest temperature
02%3352%#/.42/,3%44).'3
setting, the top of the unit will become very
hot. Staff and customers using the equipment
should be informed about this.
0RESSURE#ONTROL3ETTINGS
When operated dry, the well bottoms become
very hot. Do not allow unprotected skin to
contact any well surface.
DANGER
DANGER
Steam can cause serious burns. Always use
4HEFACTORYRECOMMENDEDLOWPRESSURECONTROLSETTINGSFOR04"SARECUTINANDCUTOUTTOMAINTAIN
some type of protective covering on your hands
PROPERTEMPERATUREFORPRODUCTINTHERAIL4HEINTERIORTEMPERATUREISCONTROLLEDBYTHETHERMOSTATMOUNTEDONTHE
and arms when removing lids from the unit. Lift
DANGER
EVAPORATORCOILHOUSING
the lid in a way that will direct escaping steam
away from your face and body.
4HEFACTORYRECOMMENDEDLOWPRESSURECONTROLSETTINGSFOR"5#SARECUTINANDCUTOUTTOMAINTAIN
PROPERTEMPERATURE
Operation 8100-EF Series
8100-EF Series cold pans are adjusted at the factory to
!LL$ELFIELDREFRIGERATEDMODELSCOMEEQUIPPEDWITH
provide satisfactory operation without any further adjustVOLTCYCLESINGLEPHASEREFRIGERATIONUNITS4HE
ments. However, if it is necessary to adjust the temperature,
REFRIGERATIONVALVESAREOPENANDREADYTOOPERATEASSOON
the control is located in the machine compartment. Turn the
ASTHEPOWERSUPPLYCORDISPLUGGEDINTOTHESTANDARD
knob clockwise as indicated on the control. Settings are from
VOLTGROUNDEDELECTRICALOUTLET
1 through 7; 7 being the coldest. Adjustments should be made
gradually. Several small adjustments will be more effective
It may take an hour or longer to
realize
the
temperature
change
depending on the application
4HETEMPERATUREISCONTROLLEDBYANADJUSTABLEPRESSURE
and location of the unit.
than one large adjustment.
0RESSURE#ONTROL
CONTROLLOCATEDINTHEMACHINECOMPARTMENT!NADJUSTABLE
CONTROLHASTHEWORD#/,$%2NEARTHEKNOBWITHANARROW
These units are not designed to cool warm food products.
TOINDICATETHEADJUSTMENTDIRECTION4HESECONTROLSARE
Items should be placed in the unit pre-cooled at least to the
desired holding temperature, if not slightly colder. In some
FIELDADJUSTABLEANDDONOTREQUIREASERVICEAGENT)FYOU
applications, a gradual warming of product may occur, particuHAVEANYQUESTIONSFEELFREETOCONTACTTHE$ELFIELD3ERVICE
larly at the exposed top of the product. Stirring or rotation of
$EPARTMENT
the product may be necessary to maintain overall temperature.
Warming of food product can occur very quickly outside of the
unit. When loading or rotating the product, avoid leaving food
)NATTEMPTINGTOADJUSTTHEPRESSURECONTROL
items in a non-refrigerated location for any length of time to
YOUCANDODAMAGETOYOURUNITBYACCIDENTALLY
prevent
warming or spoilage.
ADJUSTINGTHEDIFFERENTIAL0LEASEMAKESMALL
The
cold pan is not intended to be used with ice.
INCREMENTALADJUSTMENTSIFATEMPERATURE
ADJUSTMENTISNECESSARYPLEASECONTACTTHE
SERVICEDEPARTMENTAT$ELFIELD
ORYOURLOCALSERVICEAGENT$ELFIELDISNOT
RESPONSIBLEFORCHARGESINCURREDWHILEHAVING
THEPRESSURECONTROLADJUSTED
17 differential
25 cut-in, 8 cut-out
&ORCUSTOMERSERVICECALL&AXWWWDELlELDCOM
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Operation N8600 Hot/Cold Series
Hot Operation
To assure maximum compressor life, do not
switch from “hot” to “cold” operation without
allowing a cool down period. Never switch from
hot to cold operation while hot water remains in
the pans. Failure to observe this warning will
greatly reduce compressor life and eventually
cause premature compressor failure.
N8600 Series hot and cold combination pans must be operated
with water in the well for proper hot operation. Fill well with
a minumum of 4” of water. Place function switch in HOT
position. Turn thermostat dial to highest position and allow unit
to warm up. Then reset the thermostat to maintain the desired
temperature.
When operating these units “wet,” never use
anything other than plain water in the wells
or tank. Failure to observe this warning may
result in personal injury or damage to the
unit.
DANGER
When operated at the highest temperature
setting, the top of the unit will become
very hot. Staff and customers using the
equipment should be informed about this.
To turn unit off, simply move the function switch to OFF
position. Drain water and allow unit to cool before cleaning or
switching to cold operation.
Switching from hot to cold operation
STEPS
Follow this procedure:
1) Place the function switch in the OFF position
and drain off hot water.
2) Allow the unit to cool until it can be safely
cleaned.
3) When clean up procedures are complete, unit
will be ready for cold operation. This takes
about 1 hour.
Cold Operation
Simply place the function switch to the COLD position. The
compressor controller has been factory set and no temperature
adjustment should be necessary. If the cold pan is to be used
with ice, it is recommended that the optional perforated bottoms
be used. These will allow ice to melt properly.
Switching from cold to hot operation
No special procedure is required to switch from the cold to hot
operation. Be certain to fill will with a minimum of 4” of water.
The unit is designed so that the compressor and the heating elements
cannot operate at the same time. Continued operation of the
compressor in the “hot position” should not be considered normal. Call for service if this happens.
Routine Maintenance
Stainless Steel Care and Cleaning
To prevent discoloration or rust on stainless steel several important steps
need to be taken. First, we need to understand the properties of stainless steel.
Stainless steel contains 70- 80% iron, which will rust. It also contains 12-30%
chromium, which forms an invisible passive film over the steels surface, which
acts as a shield against corrosion. As long as the protective layer is intact, the
metal is still stainless. If the film is broken or contaminated, outside elements
can begin to breakdown the steel and begin to form rust of discoloration.
Proper cleaning of stainless steel requires soft cloths or plastic scouring pads.
NEVER USE STEEL PADS, WIRE BRUSHES OR SCRAPERS!
Cleaning solutions need to be alkaline based or non-chloride cleaners. Any
cleaner containing chlorides will damage the protective film of the stainless
steel. Chlorides are also commonly found in hard water, salts, and household
and industrial cleaners. If cleaners containing chlorides are used be sure to
rinse repeatedly and dry thoroughly upon completion. Routine cleaning of
stainless steel can be done with soap and water. Extreme stains or grease
should be cleaned with a non-abrasive cleaner and plastic scrub pad. It is
always good to rub with the grain of the steel. There are also stainless steel
cleaners available which can restore and preserve the finish of the steels
protective layer. Early signs of stainless steel breakdown can consist of small
pits and cracks. If this has begun, clean thoroughly and start to apply stainless
steel cleaners in attempt to restore the passivity of the steel.
CAUTION
10
Never use an acid based cleaning solution! Many food
products have an acidic content, which can deteriorate the
finish. Be sure to clean the stainless steel surfaces of ALL
food products. Common items include, tomatoes, peppers and
other vegetables.
Cleaning the Condenser Coil
The condenser coil requires regular cleaning, recommended is every 90 days.
In some instances though you may find that there is a large amount of debris
and dust or grease accumulated prior to the 90-day time frame. In these cases
the condenser coil should be cleaned every 30 days. If the build up on the coil
consists of only light dust and debris the condenser coil can be cleaned with a
simple brush, heavier dust build up may require a vacuum or even compressed
air to blow through the condenser coil. If heavy grease is present there are
de-greasing agents available for refrigeration use and specifically for the
condenser coils. The condenser coil may require a spray with the degreasing agent and then blown through with compressed air. Failure to maintain a
clean condenser coil can initially cause high temperatures and excessive run
times, continuous operation with dirty or clogged condenser coils can result
in compressor failures. Neglecting the condenser coil cleaning procedures
will void any warranties associated with the compressor or cost to replace the
compressor.
CAUTION
Never use a high-pressure water wash for this cleaning procedure as water can damage the electrical components located
near or at the condenser coil.
In order to maintain proper refrigeration performance, the condenser fins must
be cleaned of dust, dirt and grease regularly. It is recommended that this be
done at least every three months. If conditions are such that the condenser is
totally blocked in three months, the frequency of cleaning should be increased.
Clean the condenser with a vacuum cleaner or stiff brush. If extremely dirty, a
commercially available condenser cleaner may be required.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
UNIT ASSEMBLY- N8100-FA
UPRIGHT AIR DIFFUSER
WITH AIR DEFLECTOR
BLACK AIRFLOW EXTRUSIONS
PERFORATED PAN CLIP
ADAPTER BARS
COIL ASSY COVER
PLEXIGLAS END CAPS
wiring diagram 115V N8100FA
-/$%,3./2$)#"2%%:%
,
.
'
02%3352%
#/.42/,
#/.$%.3).'5.)4
$%&2/344)-%2
#//,).'&!.3
-<2&"!#+50<$2!7).'3<./2$)#7$$7'
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
11
N8000 Series Drop-In Installation and Operation Manual
Wiring Diagram - N8100B, N8100NB, N8200 & N8200G
N8100B Series-115V
CONDENSER FAN
S
C
L1
R
COMPRESSOR
115V
COOLING T'STAT
N
G
N8200 & N8200G Series- 115V
CONDENSER FAN
S
C
ON/OFF SWITCH
L1
R
COMPRESSOR
115V
N
G
Wiring Diagram - N8800 - 208/230V
LI
THERMOSTAT
12
G
L2
DOUBLE POLE
THERMOSTAT ON
MODELS N8873 &
N8887 ONLY
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Wiring Diagram - N8700-D & N8700N
PILOT LIGHT
(FURNISHED)
H1
1000 W - 120V
OR 1000/1222 W 208-230 V
HEATING ELEMENT
P
L1
L2
H2
LINE
WIRES
TO ADDITIONAL
FOOD WARMERS
INFINITE CONTROL
WITH “OFF”
POSITION
AMPERES IN LINE WIRES
# OF
WARMERS
1
120V,
1 PHASE
8.3
2
3
4
4.8
230V,
1 PHASE
5.3
16.7
9.6
10.6
25
33.3
14.4
19.2
15.9
21.3
14.4/15.9
14.4/15.9
14.4/15.9
19.2/21.3
19.2/21.3
14.4/15.9
5
24
26.6
28.8
31.3
19.2/21.3
28.8/31.3
19.2/21.3
6
24/26.1
28.8/31.3
,
'
208V,
1 PHASE
L1
208-230V, 3 PHASE
L2
L3
,
!37)4#(
/04)/.!,
,
28.8/31.3
,
'
,
!n0/,%37)4#(
/04)/.!,
(!n
(!n
(!n
(!n
!,,7)2).'
-).)-5-!7'
#
(!n
(!n
(!n
(!n
(!n
(!n
(!n
(!n
(!(%!4%2!33%-",9
Three Phase
(!(%!4%2!33%-",9
Single Phase
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
13
N8000 Series Drop-In Installation and Operation Manual
Wiring Diagram - N8600
L1 G
WIRING FOR N8600 SERIES
120/208V OR 120/240V MODELS WITH
ONE OR TWO HEATERS
R-404A CAP TUBE REFRIGERATION SYSTEM
N L2
CONDENSER FAN
FUNCTION
SWITCH
C
COLD
OFF
HOT
S
R
COMPRESSOR
120V
COOLING T' STAT
HEATER 1
HEATING T' STAT
HEATER 2
PILOT LIGHT
Wiring Diagram - N8600 - REMOTE
WIRING FOR N8600 SERIES
120/280V OR 120/240V MODELS WITH
ONE OR TWO HEATERS
REMOTE REFRIGERATION SYSTEM
FUNCTION
SWITCH
COLD
OFF
HOT
COOLING T' STAT
L1 G
N
SOLENOID VALVE
120V
HEATER 1
HEATING T' STAT
HEATER 2
PILOT LIGHT
14
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Wiring Diagram - N8600 120V
L1 G
WIRING FOR N8600 SERIES
120V MODELS WITH
ONE OR TWO HEATERS
R-404A CAP TUBE REFRIGERATION SYSTEM
N
CONDENSER FAN
FUNCTION
SWITCH
C
COLD
OFF
HOT
S
R
COMPRESSOR
120V
COOLING T' STAT
HEATER 1
HEATING T' STAT
HEATER 2
PILOT LIGHT
Wiring Diagram - N8600 - REMOTE 120V
WIRING FOR N8600 SERIES
120V MODELS WITH
ONE OR TWO HEATERS
REMOTE REFRIGERATION SYSTEM
FUNCTION
SWITCH
COLD
OFF
HOT
COOLING T' STAT
L1 G
N
SOLENOID VALVE
120V
HEATER 1
HEATING T' STAT
HEATER 2
PILOT LIGHT
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
15
N8000 Series Drop-In Installation and Operation Manual
WIRING DIAGRAM - 8100-EF, 8100-EFN
ON/OFF SWITCH
,
#//,).'4g34!4
.
'
16
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
#/.$%.3%2&!.
3
C
2
#/-02%33/2
6
N8000 Series Drop-In Installation and Operation Manual
DROP IN LOUVER PANEL
Cutout dimension
12” x 23.5”
Louver part #
359-411-0003
25”
13”
MISC PARTS - 8000 SERIES
Description
Part #
Divider bar, 2” x 20.93”265-AXE-0000
Trim gasket - sold by foot
1701273
Plastic drain
3234242
Divider bar, 12.75” x .90”243-ALS-0032
Divider bar 21” x .90”243-ABO-0001
Cap Tube Chart - R134A Refrigerant
Model Number
N8118B
N8130B
N8143B
N8156B
N8168NB
N8169B
N8181B
Cap Tube Size/Length
.036 x 72”
.036 x 72”
.036 x 72”
.042 x 120”
.042 x 120”
.042 x 120”
.042 x 120”
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
17
N8000 Series Drop-In Installation and Operation Manual
replacement parts- N8100-FA
8
7
9
6
1
2
5
3
10
4
11
12
13
14
15
16
N8131-FA
N8144-FA
N8157-FA
N8169-FA
N8182-FA
DESCRIPTION
2-PAN
3-PAN
4-PAN
5-PAN
6-PAN
1
UPRIGHT DIFFUSER226-0V3-0030226-0V3-0031226-0V3-0032226-0V3-0033226-0V3-0034
2
AIR DEFLECTOR226-A9L-0030226-A9L-0031226-A9L-0032226-A9L-0033226-A9L-0034
3
COIL
3516238
3516238
3516238
3516238
3516238
4
EXPANSION VALVE
3516273
3516273
3516273
3516273
3516273
5
BOTTOM AIR DIFFUSER226-0V0-0030226-0V0-0031226-0V0-0032226-0V0-0033226-0V0-0034
6
COIL ASSY COVER226-0V1-0030226-0V1-0031226-0V1-0032226-0V1-0033226-0V1-0034
7
ADAPTER BAR243-AB0-0001243-AB0-0001243-AB0-0001243-AB0-0001243-AB0-0001
8
PERFORATED PAN CLIP270-0V5-0030270-0V5-0031270-0V5-0032270-0V5-0033270-0V5-0034
9
BLACK AIRFLOW EXTRUSION 316-991-0030
316-991-0031
316-991-0032
316-991-0033
316-991-0034
10 COVER SUPPORT BRACKET226-0V2-0000226-0V2-0000226-0V2-0000226-0V2-0000226-0V2-0000
11 FAN COVER
3516173
3516173
3516173
3516173
3516173
12 FAN BLADE
3516172
3516172
3516172
3516172
3516172
13 FAN MOTOR21626912162691216269121626912162691
14 FAN BRACKET
031-264-0000
031-264-0000
031-264-0000
031-264-0000
031-264-0000
15 PLEXIGLAS END CAP
091-0XL-0000
091-0XL-0000
091-0XL-0000
091-0XL-0000
091-0XL-0000
16 S/S THUMB SCREW
9321541
9321541
9321541
9321541
9321541
Cond. Unit
3526745
3526731
3526731
3526702
3526702
Timer21943452194345219434521943452194345
Pressure Control21939272193927219392721939272193927
18
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Condensing Unit Assembly - N8200 & N8200G 1/4 h.p., 1/3 h.p. & 1/2 h.p.
3
6
4
5
1
2
1/4 HORSE POWER
1/3 HORSE POWER
Key Qty
Delfield Part #
1
1
3526716
2
1
000-AWP-0000
3
1
0360325
4
1
3516101
722190010
12183348
12194099
Key Qty
Delfield Part #
1
1
3526710
2
1
000-AWP-0000
3
1
0360325
4
1
3516101
722190010
12183348
12194099
R-404a, Low
Used on N8231, N8245, N8259,N8231G, N8245G
Description
condensing unit, 1/4 h.p., low, R-404a, NB
switch, assembly, with bracket, 8200
heat exchanger assembly, condensing unit
dryer, filter, .25” dia.in/out
nut, wire
Cord/plug assy
Switch 15 amp
R-404a, Low
Used on N8273, N8287, N8259G
Description
condensing unit, 1/3 h.p., low, R-404a, NB
switch, assembly, with bracket, 8200
heat exchanger assembly, condensing unit
dryer, filter, .25” dia.in/out
nut, wire
Cord/plug assy
Switch 15 amp
1/2 HORSE POWER
R-404a, Low
Used on N8273G
Key Qty
Delfield Part #
1
1
3526711
2
1
000-AWP-0000
3
1
0360325
4
1
3516101
722190010
12183348
12194099
Description
condensing unit, 1/2 h.p., low, R-404a, NB
switch, assembly, with bracket, 8200
heat exchanger assembly, condensing unit
dryer, filter, .25” dia.in/out
nut, wire
Cord/plug assy
Switch 15 amp
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
19
N8000 Series Drop-In Installation and Operation Manual
Narrow Base Condensing Unit Assembly - N8100B & N8100NB 1/5 h.p.
7
1
6
8
10
2
9
3 4
5
1/5 HORSE POWER
R-134a, Low
Used on N8118B, N8130B, N8143B, N8146NB, N8168NB
Key
1
2
3
4
5
6
7
8
9
10
20
Qty
Delfield Part #
1
3526694
1
031-264-0000
1
3516172
12162691
1
3516067
1
3977986
12183300
1
3516047
1
026-ANM-0030
1
024-ADB-0040
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
Description
compressor, 1/5 h.p.,115v/60hz
bracket, fan motor, blower coil
blade, fan, 5.56, CCW, Lexan, clear
motor, fan, 115v, 50/60, UPPCO/bay
coil, condenser, 9 x 10, R-134a, 8100
guard, wire, fan, condenser unit, 8100
harness, wire, power cord, 8100
thermostat
fan baffle
compressor stand
N8000 Series Drop-In Installation and Operation Manual
Narrow Base Condensing Unit Assembly - N8100B 1/4 h.p.
3
1
2
5
8
6
7
4
1/4 HORSE POWER
R-134a, Low
Used on N8156B, N8169B
Key Qty
Delfield Part #
1
1
3526695
2
1
3977986
3
12183300
4
1
3516067
5
1
3516047
6
12194013
7
1
026-ANM-0033
82
028-ANK-0030
Description
compressor, 1/4 h.p.,115v/60hz
guard, wire, fan, condenser unit, N8100
harness, wire, power cord, N8100
coil, condenser, 9 x 10, R-134a, N8100
thermostat
fan assembly, condenser, 8” blade
baffle, fan, 1/4 h.p. condensing unit
cover, access, compressor standard, N8100
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
21
N8000 Series Drop-In Installation and Operation Manual
CONDENSING UNIT ASSEMBLY 8100-EF, 8100-EFN Series
Filter
Dryer
Compressor
Relay
Box
Capacitor
Condenser
Receiving
Tank
Used on 8100-EF & 8100-EFN
3526716Condensing Unit 1/4 115/60 R404A
3516101
Dryer, Filter, 1/4 ODF Low
2194231
Thermostat
2194099
On/off switch
22
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Food Well Assembly With Thermostat control - N8600
9
11
10
7
5
For models N8600
Key Delfield Part #
1265-ANQ-003D
2265-ANS-0001
3
026-AO6-0041
42193979
52194012
62194190
7
3234556
8
9291234
9
3516047
102194185
112194942
6
2
8
Description
FRONT,COLLAR,MTG,8600
COVER,CTRL BOX,8700 SERIES
BOX,CTRL,GALV,8600 SERIES
SWITCH, 3 POSITION, 30AMP
THERMOSTAT, ELECTRIC
LIGHT, PILOT, 125V, RED
KNOB, THERMOSTAT CONTROL
LABEL, “HOT/OFF/COLD”
TEMPERATURE CONTROL
CONTACTOR RELAY 30 AMP 120V
IMMERSION HEATER 240V 1PH 5KW
4
1
3
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
23
N8000 Series Drop-In Installation and Operation Manual
Food Well Assembly With Infinite Control - N8700
24
For models N8700D, N8700N
Key Delfield Part #
-2194110
-2194107
1
0160009
1
0160008
2
3434703
3
3234357
42194007
42194006
52194335
6
3434664
7
3234557
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
Description
control, infinite, 240v, 14a
control, infinite, 120v
well, hot food, without drain
well, hot food, with drain
insulation, fiberglass, 9” x 48”
plate, deflector, DFW, with drain
element, heating, 208/230v, 1000/1222w
element, heating, 120v
thermostat, non-adjustable, 480˚F
insulation, blanket, 24” wide
knob, infinite control
N8000 Series Drop-In Installation and Operation Manual
Food Well Assembly With Thermostat control
2
1
5
3, 4
For models N8831, N8859, N8873, N8887
Key Delfield Part #
Description
12193984
2
3234357
32194007
42194006
5
3234556
thermostat 30A for M# N8873 and N8887
plate, deflector, DFW, with drain
element, heating, 208/230v, 1000/1222w
element, heating, 120v, 1000w
knob, thermostat control
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
25
N8000 Series Drop-In Installation and Operation Manual
Standard One Year Warranty (One year parts, 90 days labor.)
The Delfield Company (“Delfield”) warrants to the Original Purchaser
of the Delfield product (herein called the “Unit”) that such Unit, and all
parts thereof, will be free from defects in material and workmanship
under normal use and service for a period of one (1) year from the
date of shipment of the Unit to the Original Purchaser or, if the
Original Purchaser returns the warranty card completely filled out
including the date of installation within thirty (30) days of receipt
of the Unit, one (1) year from the date of installation. During this
one year warranty period, Delfield will repair or replace any defective
part or portion there of returned to Delfield by the Original Purchaser
which Delfield determines was defective due to faulty material or
workmanship. The Original purchaser will pay all labor, crating, freight
and related costs incurred in the removal of the Unit of defective
component and shipment to Delfield, except that during a period of
either ninety (90) days from the date of shipment of the Unit to the
Original Purchaser or, if the Original Purchaser returns the warranty
card completely filled out including the date of installation within thirty
(30) days of receipt of the Unit, ninety (90) days from the date of
installation Delfield will pay all related labor costs. Delfield will pay the
return costs if the Unit or part thereof was defective.
The term “Original Purchaser” as used herein means that person, firm,
association, or corporation for whom the Unit was originally installed.
This warranty does not apply to any Unit or part thereof that has
been subjected to misuse, neglect, alteration, or accident, such as
accidental damage to the exterior finish, operated contrary to the
recommendations specified by Delfield; or repaired or altered by
anyone
other than Delfield in any way so as to, in Delfield’s sole
judgement, affect its quality or efficiency. This warranty does not
apply to any Unit that has been moved from the location where it was
originally installed. This warranty also does not cover the refrigerator
drier or the light bulbs used in the Unit. The warranty is subject to
the user’s normal maintenance and care responsibility as set
forth in the Service and Installation Manual, such as cleaning the
condenser coil, and is in lieu of all other obligations of Delfield.
Delfield neither assumes, nor authorizes any other person
to assume for Delfield, any other liability in connection with
Delfield’s products.
Removal or defacement of the original Serial Number or Model
Number from any Unit shall be deemed to release Delfield from all
obligations hereunder or any other obligations, express or implied.
Parts furnished by suppliers to Delfield are guaranteed by Delfield
only to the extent of the original manufacturer’s express warranty
to Delfield. Failure of the Original Purchaser to receive such
manufacturer’s express warranty to Delfield. Failure of the Original
Purchaser to receive such manufacturers warranty shall in no way
create any warranty, expressed or implied, or any other obligation or
liability on Delfield’s part in respect thereof.
IF THE CUSTOMER IS USING A PART THAT RESULTS IN
A VOIDED WARRANTY AND A DELFIELD AUTHORIZED
REPRESENTATIVE TRAVELS TO THE INSTALLATION
ADDRESS TO PERFORM WARRANTY SERVICE, THE SERVICE
REPRESENTATIVE WILL ADVISE CUSTOMER THE WARRANTY
IS VOID. SUCH SERVICE CALLS WILL BE BILLED TO
CUSTOMER AT THE AUTHORIZED SERVICE CENTER’S THEN
APPLICABLE TIME AND MATERIALS RATES. CONSIDER:
CUSTOMER MAY INITIATE A SERVICE AGREEMENT WITHOUT
PARTS COVERAGE.
If shipment of a replacement part is requested prior to the arrival in
the Delfield factory of the part claimed to be defective, the Original
Purchaser must accept delivery of the replacement part of a C.O.D.
basis, with credit being issued after the part has been received and
inspected at Delfield’s plant and determined by Delfield to be within
this warranty.
26
Under no condition does this warranty give the Original Purchaser the
right to replace the defective Unit with a complete Unit of the same
manufacturer or of another make. Unless authorized by Delfield in
writing, this warranty does not permit the replacement of any part,
including the motor-compressor, to be made with the part of another
make or manufacturer.
No claims can be made under this warranty for spoilage of any
products for any reason, including system failure.
The installation contractor shall be responsible for building access,
entrance and field conditions to insure sufficient clearance to allow
any hood(s), vent(s), or Unit(s) if necessary, to be brought into the
building. Delfield will not be responsible for structural changes or
damages incurred during installation of the Unit or any exhaust
system.
Delfield shall not be liable in any manner for any default or delay in
performance hereunder caused by or resulting from any contingency
beyond Delfield’s control, including, but not limited to, war,
governmental restrictions or restraints, strike, lockouts, injunctions,
fire, flood, acts of nature, short or reduced supply of raw materials, or
discontinuance of the parts by the original part manufacturer.
Except as provided in any Additional Four Year Protection Plan,
if applicable, and the Service Labor Contract, if applicable, the
foregoing is exclusive and in lieu of all other warranties, whether
written or oral, express or implied. This warranty supersedes
and excludes any prior oral or written representations or
warranties. Delfield expressly disclaims any implied warranties
of merchantability, fitness for a particular purpose of compliance
with any law, treaty, rule or regulation relating to the discharge
of substances into the environment. The sole and exclusive
remedies of any person relating to the Unit, and the full liability
of Delfield for any breach of this warranty, will be as provided in
this warranty.
Other than this Delfield Standard One Year Limited Warranty, any
applicable Delfield Additional Four Year Protection Plan or applicable
Delfield Service Labor Contract, the Original Purchaser agrees and
acknowledges that no other warranties are offered or provided in
connection with or for the unit or any other part thereof.
In no event will Delfield be liable for special, incidental or
consequential damages, or for damages in the nature of penalties.
IF DURING THE WARRANTY PERIOD, CUSTOMER USES A PART
FOR THIS DELFIELD EQUIPMENT OTHER THAN AN UNMODIFIED
NEW OR RECYCLED PART PURCHASED DIRECTLY FROM
DELFIELD OR ANY OF ITS AUTHORIZED SERVICE CENTERS
AND/OR THE PART BEING USED IS MODIFIED FROM ITS
ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID.
FURTHER, DELFIELD AND ITS AFFILIATES WILL NOT BE
LIABLE FOR ANY CLAIMS DAMAGES OR EXPENSES INCURRED
BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY,
IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF
ANY MODIFIED PART AND/OR PART RECEIVED FROM AN
UNAUTHORIZED SERVICE CENTER. If the warranty becomes
void, Customer may purchase from Delfield, if available, a
Service Agreement or service at the then current time and
materials rate.
For more information on Delfield warranty’s log on and check out the
service section of our web site at www.delfield.com.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
N8000 Series Drop-In Installation and Operation Manual
Additional Four Year Protection Plan
Delfield Model# Serial #
(for Motor-Compressor only)
Installation
Date
Replacement of a defective Motor-Compressor is limited to one (1)
Motor-Compressor by us during the four (4) year period. Delfield shall
replace the Motor-Compressor at no charge.
In addition to the Standard One Year Warranty on the MotorCompressor contained in the above listed Delfield product (the
“Unit”), The Delfield Company (“Delfield”) also agrees to repair, or
exchange with similar or interchangeable parts in design and capacity
at Delfield’s option, the defective Motor-Compressor contained in the
Unit (the “Motor-Compressor), or any part thereof, for the Original
Purchaser only, at any time during the four (4) years following the
initial one (1) year period commencing on the date of installation
for the Original Purchaser. Failure of the Original Purchaser to
register the registration card containing the Original Purchasers
name, address, date of installation, model number and serial
number of the Unit containing the Motor-Compressor within
30 days from the date of installation shall void this warranty.
This additional warranty is only available if the Motor-Compressor
is inoperative due to defects in material or factory workmanship, as
determined by Delfield in its sole judgement and discretion. The
Original Purchaser shall be responsible for returning the defective
Motor-Compressor to Delfield prepaid, F.O.B. at the address shown
on the back cover of this manual.
The term “Original Purchaser” as used herein means that person, firm,
association, or corporation for whom the Unit was originally installed.
The term “Motor-Compressor” as used herein does not include unit
base, air or water cooled condenser, receiver, electrical accessories
such as relay, capacitors, refrigerant controls, or condenser fan/motor
assembly. This warranty does not cover labor charges incidental
to the replacement of parts. This warranty further does not include
any equipment to which said condensing unit is connected, such as
cooling coils, temperature controls or refrigerant metering devices.
This warranty shall be void if the Motor-Compressor, in Delfield’s
sole judgement, has been subjected to misuse, neglect, alteration
or accident, operated contrary to the recommendations specified
by the Unit manufacturer, repaired or altered by anyone other than
Delfield in any way so as, in Delfield’s sole judgment, to affect its
quality or efficiency or if the serial number has been altered, defaced
or removed. This Warranty does not apply to a Motor-Compressor in
any Unit that has been moved from the location where it was originally
installed. The addition of methyl chloride to the condensing unit or
refrigeration system shall void this warranty.
General Conditions
Delfield shall not be liable in any manner for any default or delay in
performance hereunder caused by or resulting from any contingency
beyond Delfield’s control, including, but not limited to, war,
governmental restrictions or restraints, strike, lockouts, injunctions,
fire, flood, acts of nature, short or reduced supply of raw materials,
or discontinuance of any part or the Motor-Compressor by the unit
manufacturer.
This warranty does not give the Original Purchaser of the MotorCompressor the right to purchase a complete replacement MotorCompressor of the same make or of another make. It further does
not permit the replacement to be made with a Motor-Compressor
of another kind unless authorized by Delfield. In the event Delfield
authorizes the Original Purchaser to purchase a replacement MotorCompressor locally, only the wholesale cost of the Motor-Compressor
is refundable.
Expressly excluded from this warranty are damages resulting from
spoilage of goods.
Except as provided in any applicable Standard One Year Limited
Warranty or applicable Service Labor Contract, the foregoing is
exclusive and in lieu of all other warranties, whether written or
oral, express or implied. This Warranty supersedes and excludes
any prior oral or written representations or warranties. Delfield
expressly disclaims any implied warranties of merchantability,
fitness for a particular purpose or compliance with any law,
treaty, rule or regulation relating to the Motor-Compressor, and
the full liability of Delfield for any breach of this warranty, will be
as provided in this warranty.
Other than any applicable Delfield Standard One year Limited
Warranty, this Delfield Additional Four Year Protection Plan and any
applicable Delfield Service Labor Contract, the Original Purchaser
agrees and acknowledges that no other warranties are offered or
provided in connection with or for the Motor-Compressor or any part
thereof.
In no event will Delfield be liable for special, incidental or
consequential damages, or for damages in the nature of penalties.
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
27
Covington, TN
Mt. Pleasant, MI
Thank you for choosing Delfield!
Help is a phone call away. Help our team of professional, courteous
customer service reps by having your model number and serial number
available at the time of your call (800) 733-8829.
Model:_____________________ S/N: ____________________
Installation Date:_____________
For a list of Delfield’s authorized parts depots,
visit our website at www.delfield.com.
3)SABELLA2D-T0LEASANT-)53!sORs&AXsWWWDELFIELDCOM
$ELFIELDRESERVESTHERIGHTTOMAKECHANGESINDESIGNORSPECIFICATIONSWITHOUTPRIORNOTICE¥4HE$ELFIELD#OMPANY!LLRIGHTSRESERVED0RINTEDINTHE53!
DM8000 08/06