1.5 TO 5 TONS YORK HEAT PUMPS CONDENSING

http://www.rezine.net
1.5 TO 5 TONS YORK HEAT PUMPS
CONDENSING UNITS
YZB 13 SEER R-410a Single Phase
have the following available benefits and options
Please, specify the following:
High/Low Pressure switch, Internal Protections
Factory Installed Filter Drier
Isolated Compressor Compartment
Low Sound Operation with Low RPM Fans
5 Years Parts Warranty
10 Years Compressor Warranty
Choice of colors to match building
T2950 365 Days Thermostat
BAS Networkable with free Web Software
ArmorGuard Stainless Steel 316 Corrosion Protection on coils
Please call us !
Samy Rezine
Karine Leblanc
Maher Syada
Michelle Sangalang
310-420-6767
310-420-7066
626-255-6406
626-854-4613
Page 1
samy@rezine.net
karine@rezine.net
maher@rezine.net
michelle@rezine.net
246726-YTG-D-0507
http://www.rezine.net
DESCRIPTION
The YZB Series unit is the outdoor part of a versatile heat pump
system. It is designed to be custom matched with one of our
complete line of evaporator sections, each designed to serve a
specific function. Matching air handlers are available for upflow,
downflow, and horizontal left or right application to provide a
complete system. Electric heaters are available if required. Addon coils are available for use with upflow, downflow, or horizontal furnaces. Field installed accessories are available as
needed.
WARRANTY
5-year limited parts warranty.
10-year limited compressor warranty.
TECHNICAL GUIDE
AFFINITY
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A
MODELS: YZB018 THRU 060
(1.5 THRU 5 NOMINAL TONS)
LISTED
ISO 9001
Certified Quality
Management System
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ari.org/aridirectory.
FEATURES
• Superior Coil Protection – A stamped decorative metal coil
guard completely protects coil from debris and other large
damaging material while a polymer mesh further protects the
coil against smaller particles.
• Isolated Compressor Compartment – A molded composite
bulkhead isolates the compressor from the rest of the unit
reducing sound and vibration.
• Protected Compressors – Each compressor is protected
against high and low pressure as well as excessive temperature. This is accomplished by by the simultaneous operation
of a high pressure relief valve and temperature sensors
which protect the compressor if undesirable conditions occur.
• Environmentally Friendly Refrigerant – Next generation
refrigerant R-410A delivers environmentally friendly performance, with zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate protection from harmful U.V. rays as well as rust creep
ensuring long-lasting high quality appearance. A powderpaint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish
that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhanced
installability by featuring a slide-down control compartment
allowing easy access to control components along with
angled service valves to reduce overall installation time and
cost.
• Low Operating Sound Levels – A fan design boasting technology adapted from aeronautic and defense engineering
provides for whisper quiet operation by allowing airflow to
flow smoothly and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filterdrier filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel
with handle makes for easy entry to internal components.
• Long Lasting Operation – Strong and durable composite
base pan provides added strength while resisting rust and
corrosion as well as reducing sound and vibration.
• Complete System Control – These heat pumps utilize the
unique microprocessor defrost control system to provide optimal comfort as well as monitor the overall system for reliable
operation. The defrost control system continuously monitors
the space environment to maintain optimum efficiency. It initiates defrost only when necessary to further reduced heating
costs and improve reliability. Supplemental heat can only
operate below the balance point and then only upon need. In
the event improper operating conditions occur (high temperature and/or high pressure), the will automatically shut the system down to extend the life of the heat pump. Rapid cycling is
prevented by use of an internal anti-recycle timer. The defrost
control features an internal memory to aid the technician in
troubleshooting, reducing service time and cost.
Certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.
FOR DISTRIBUTION USE ONLYPage
- NOT 2
TO BE USED AT POINT OF RETAIL SALE
246726-YTG-D-0507
http://www.rezine.net
Physical and Electrical Data
MODEL
YZB1811
YZB02411
YZB03011
Unit Supply Voltage
YZB03611
YZB04211
YZB04811
YZB06011
208/230 – 1 – 60
1
187 to 252
Normal Voltage Range
Minimum Circuit Ampacity
14.2
18.8
22.0
25.6
32.1
35.3
43.7
Max. Overcurrent Device Amps 2
25
30
35
40
50
60
60
Min. Overcurrent Device Amps 3
15
20
25
30
35
40
45
Scroll
Scroll
Scroll
Scroll
Scroll
Scroll
Scroll
Compressor Type4
Compressor Amps
Rated Load
11.0
14.7
16.4
19.3
24.5
27.0
33.7
Locked Rotor
51
60
73
88
105
113
150
No
No
No
No
No
No
No
Rated Load
0.5
0.5
1.5
1.5
1.5
1.5
1.5
Crankcase Heater
Fan Motor Amps
Fan Diameter Inches
Rated HP
Fan Motor
Coil
22
22
22
22
22
22
22
1/15
1/15
1/4
1/4
1/4
1/4
1/4
Nominal RPM
850
850
850
850
850
850
850
Nominal CFM
2,050
2,250
3,200
3,250
3,250
3,500
3,500
Face Area Sq Ft
14.86
17.15
17.15
20.58
20.58
20.58
20.58
1
1
1
1
1
2
2
Rows Deep
22
22
22
22
22
22
22
Liquid Line Set OD (Field Installed)
Fin /Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Vapor Line Set OD (Field Installed)
3/4
3/4
3/4
3/4
7/8
7/8
7/8
Oz)5
7-1
7-10
7-9
9-5
9-2
12-8
12-8
Charge Per Foot, oz.
0.62
0.62
0.62
0.62
0.67
0.67
0.67
Operating Weight Lbs
175
190
195
220
220
260
265
Unit Charge (Lbs -
1
2
3
4
5
Rated in accordance with ARI Standard 110, utilization range “A”.
Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
All scrolls listed with superscript “B” are Bristol scrolls. All scrolls listed with superscripts “C” are Copeland scrolls.
The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15
feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
All dimensions are in inches. They are subject to change
without notice. Certified dimensions will be provided upon
request.
DIMENSIONS
A
VAPOR
LIQUID
2-3/8
2
C
3-1/8
6-1/2
B
Refrigerant
Connection
Service Valve Size
Dimensions
(Inches)
Unit
Model
A
B
C
018
29-1/2
37
31
024
33-1/2
37
31
030
33-1/2
37
31
036
39-1/2
37
31
042
39-1/2
37
31
048
39-1/2
37
31
060
39-1/2
37
31
Page 3
Liquid
Vapor
3/4”
3/8”
7/8”
Unitary Products Group
http://www.rezine.net
HEATING PERFORMANCE - With Air Handler
AIR HANDLER
COOLING
RATED CFM
UNIT MODEL
MODEL
NET MBH
TOTAL
W
SENS.
SEER
EER
1 PH HP WITH AV / SV - VARIABLE SPEED
YZB01811
AV24
17
600
18
13
14
11.5
YZB02411
AV24
17
800
23.4
17.1
14
11.5
YZB03011
AV36
17
1000
30
21.2
14
11.5
AV36
17
1200
35.8
26.9
14
12
AV/SV48
24
1200
35.8
26.9
14
11.5
AV/SV48
24
1400
41.5
32.6
14
11.5
YZB03611
YZB04211
YZB04811
AV/SV48
24
1600
46.5
34.7
13.5
11
YZB06011
AV/SV60
24
1780
55
40.2
13.05
11
1 PH AHP WITH AHP
YZB01811
AHP18
17
600
18
13.2
13
11
YZB02411
AHP24
AHP30
17
17
800
1000
22.8
29.2
16.7
21.1
13
13
11
11
AHP36
17
1000
29.2
21.1
13
11
YZB03011
YZB03611
AHP42
21
1200
34.4
25.8
13
11
YZB04211
AHP/SHP48
24
1400
41
31.8
13
11
AHP/SHP48
24
1600
46
33
13
11
AHP/SHP60
24
1600
46
33
13.25
11
AHP/SHP60
24
1800
56
40
13
11
YZB04811
YZB06011
Cooling MBH based on 80°F entering air temperature, 50% RH, 95 F OAT and rated air flow.
HEATING PERFORMANCE - With Air Handler
ARI HEATING2
UNIT MODEL*
AIR
HANDLER
47°F
MBH
COP
17°F
KW
MBH
COP
HSPF
KW
STD
1 PH HP WITH AV / SV / F*FV - VARIABLE SPEED
YZB01811
AV24
18
3.42
1.54
11.2
2.24
1.46
8.25
YZB02411
AV24
23.2
3.68
1.85
13.5
2.28
1.73
8.25
YZB03011
AV36
29.2
3.66
2.34
17.6
2.2
2.34
8.15
YZB03611
AV/SV48
36
3.5
3.01
23.6
2.26
3.06
8.3
YZB04211
AV/SV48
42
3.82
3.22
27.8
2.48
3.28
8.2
YZB04811
AV/SV48
48
3.6
3.91
32.6
2.26
4.23
8.1
YZB06011
AV/SV60
57
3.58
4.67
34.4
2.34
4.31
8.35
YZB01811
AHP18
18
3.28
1.61
11.6
2.32
1.46
8
YZB02411
AHP24
24
3.44
2.04
14.2
2.38
1.75
8
YZB03011
AHP36
30
3.44
2.56
18.3
2.28
2.35
8
YZB03611
AHP42
36
3.36
3.14
24.4
2.32
3.08
8
YZB04211
AHP/SHP48
42
3.66
3.36
28.4
2.54
3.28
8
AHP/SHP48
48
3.5
4.1
33.2
2.3
4.23
8
AHP/SHP60
48
3.5
4.1
33.2
2.3
4.23
8
AHP/SHP60
57
3.54
4.76
34.6
2.36
4.3
8
1 PH HP WITH AHP / SHP / F*FP
YZB04811
YZB06011
1 Rated CFM same as for cooling.
2 Heating MBH based on ARI standards of 70° DB entering indoor air, 72% RH outdoor air with 25 feet of
CP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage
Page 4
246726-YTG-D-0507
ACCESSORIES*
http://www.rezine.net
SOUND POWER RATINGS*
Hard Start Kit (024-31994-000, 024-31995-000) - Provides
increased starting torque for areas with low voltage.
UNIT MODEL
(dBA)
Cooling
Heating
TXV Kits - 1TV09 series thermal expansion valves precisely
meter refrigerant for optimum performance.
018
65
66
024
70
70
Compressor
Discharge
Temperature
Sensor
(2SN02700124) - Adds an additional safety for improved
compressor reliability and diagnostics. Compatible only with
13 SEER and higher heat pumps.
030
70
71
036
71
72
042
74
74
048
74
75
060
74
75
Bonnet Sensor (2SB13700124) - The bonnet sensor is used
to sense plenum temperature, and is optional with a gas or oil
back-up heat source. Compatible only with 13 SEER and
higher heat pumps.
Dehumidistat (2HU16700124) - Provides increased dehumidification when matched with variable speed furnace or air
handler.
Heat Pump Risers - (526-35389-000, 526-35390-000, 52635391-000) - 3", 6", or 12" risers mount easily in composite
base pan recesses, ensuring the unit stays clear of snow and
ice build-up in harsh winter weather.
* Rated in accordance with ARI 270-95 Standards.
COLOR GRILLES
CHOICE OF SEVERAL COLOR COIL GRILLES TO
COMPLIMENT ANY HOME.
Color Grill
Color Description
1CP0126
Terra Cotta
018
1CP0130
Terra Cotta
024, 030
1CP0136
Terra Cotta
036, 042, 048, 060
Room Thermostats - A wide selection of matching thermostats is available to provide features required for any installation.
1CP0226
Jet Black
018
1CP0230
Jet Black
024, 030
1CP0236
Jet Black
036, 042, 048, 060
2H/1C, manual changeover electronic non-programmable
thermostat.
1CP0326
Stone
018
1CP0330
Stone
024, 030
3H/2C, non-programmable digital thermostat.
1CP0336
Stone
036, 042, 048, 060
3H/2C, auto/manual changeover, electronic programmable,
7-day, thermostat.
1CP0426
Bermuda
018
1CP0430
Bermuda
024, 030
* For the most current accessory information, refer to the
price book or consult factroy.
1CP0436
Bermuda
036, 042, 048, 060
1CP0526
Gunmetal
018
1CP0530
Gunmetal
024, 030
1CP0536
Gunmetal
036, 042, 048, 060
Unitary Products Group
Page 5
1CP0626
Chocolate
018
1CP0630
Chocolate
024, 030
1CP0636
Chocolate
036, 042, 048, 060
9
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
INDOOR COIL MODEL NO.
CONDENSING
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
IDCFM
ID DB (°F)
ID WB (°F)
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
YZB01811
FC/MC/PC/UC18
80
57
14.4
14.5
1.1
13.9
14.0
1.3
13.3
13.4
1.4
12.7
12.8
1.6
12.2
12.3
1.9
11.7
11.8
2.1
11.2
11.3
2.4
80
62
17.2
12.8
1.1
16.5
12.4
1.3
15.7
12.1
1.4
14.9
11.8
1.6
14.1
11.5
1.9
13.4
11.3
2.1
12.7
11.0
2.3
450
75
62
16.4
10.6
1.1
15.8
10.3
1.3
15.3
10.1
1.4
14.7
9.9
1.6
13.8
9.6
1.8
12.9
9.2
2.1
11.9
8.9
2.3
80
67
18.9
11.1
1.1
18.2
10.7
1.3
17.4
10.4
1.4
16.7
10.1
1.6
15.7
9.7
1.9
14.7
9.3
2.1
13.8
8.9
2.3
80
72
21.3
9.0
1.1
20.2
8.6
1.2
19.0
8.1
1.4
17.9
7.7
1.6
16.9
7.3
1.8
15.9
7.0
2.1
14.8
6.6
2.3
80
57
16.8
16.9
1.1
16.0
16.1
1.3
15.2
15.3
1.4
14.4
14.5
1.6
13.8
13.9
1.9
13.2
13.3
2.1
12.6
12.7
2.3
80
62
19.1
15.4
1.1
18.1
14.9
1.3
17.2
14.4
1.4
16.2
13.9
1.6
15.5
13.5
1.9
14.8
13.0
2.1
14.1
12.6
2.3
600
75
62
18.1
12.7
1.1
17.4
12.5
1.3
16.7
12.2
1.4
15.9
11.9
1.6
14.9
11.4
1.8
13.9
11.0
2.1
12.9
10.5
2.3
80
67
20.7
13.1
1.1
19.8
12.7
1.3
18.9
12.4
1.4
18.0
12.0
1.6
16.9
11.5
1.8
15.8
11.1
2.1
14.7
10.6
2.3
80
72
22.2
10.1
1.1
21.1
9.7
1.2
19.9
9.3
1.4
18.8
8.9
1.6
17.7
8.4
1.8
16.6
8.0
2.1
15.5
7.5
2.3
80
57
19.2
19.4
1.1
18.2
18.3
1.3
17.1
17.2
1.4
16.1
16.1
1.6
15.4
15.4
1.9
14.7
14.8
2.1
14.1
14.1
2.3
80
62
20.9
18.1
1.1
19.8
17.4
1.3
18.6
16.8
1.4
17.5
16.1
1.6
16.8
15.5
1.8
16.1
14.8
2.1
15.5
14.2
2.3
750
75
62
19.8
14.9
1.1
18.9
14.6
1.3
18.1
14.2
1.4
17.2
13.9
1.6
16.1
13.3
1.8
15.0
12.7
2.1
13.9
12.2
2.3
80
67
22.6
15.1
1.1
21.5
14.7
1.2
20.4
14.3
1.4
19.3
13.9
1.6
18.1
13.4
1.8
16.9
12.9
2.1
15.7
12.3
2.3
80
72
23.1
11.2
1.1
22.0
10.8
1.2
20.8
10.4
1.4
19.7
10.0
1.6
18.5
9.5
1.8
17.3
9.0
2.1
16.1
8.4
2.3
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA08B
MV12B
AHP18
AV24
F*FP024
–
–
10
Coil
FC/MC18B
FC/MC18B
–
–
–
HC18
HD24
T.C.
1.00
0.97
1.00
1.00
0.99
1.00
1.00
S.C.
1.00
0.98
1.00
0.98
1.00
1.00
1.00
KW
1.00
0.96
1.00
0.96
1.00
1.00
1.00
Variable Speed
Furnace
PV8*A12
PV9*A12
P(C,V)9*B12
Page 6
Coil
T.C.
S.C.
KW
FC/MC/PC18A
FC/MC/PC18A
FC/MC/PC18B
1.02
1.01
1.01
0.97
0.97
0.97
1.07
1.07
1.07
Unitary Products Group
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB02411
INDOOR COIL MODEL NO.
AHP24
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
ID CFM
600
800
1000
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
21.7
24.5
23.6
27.4
29.9
24.0
25.4
24.8
28.4
30.8
26.4
26.3
26.0
29.5
31.7
17.2
S.C.
21.9
20.9
16.6
17.8
14.0
24.3
23.9
19.3
19.9
15.6
26.7
24.3
22.0
22.0
K.W.
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
T.C.
20.9
23.1
22.3
25.5
28.0
23.1
24.2
23.4
26.6
28.9
25.3
25.4
24.5
27.6
29.9
S.C.
21.1
19.9
15.9
16.6
13.3
23.4
22.8
18.3
18.9
14.8
25.6
25.7
20.8
21.2
16.4
K.W.
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
T.C.
20.2
21.7
21.1
23.6
26.1
22.2
23.1
22.0
24.7
27.1
24.3
24.5
23.0
25.8
28.1
S.C.
20.4
18.9
15.1
15.5
12.5
22.4
21.7
17.4
18.0
14.1
24.5
24.5
19.6
20.4
15.6
K.W.
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
T.C.
19.5
20.2
19.8
21.7
24.1
21.4
21.9
20.6
22.8
25.2
23.2
23.6
21.4
23.9
26.3
S.C.
19.6
17.9
14.4
14.3
11.8
21.5
20.6
16.4
17.0
13.3
23.4
23.3
18.5
19.7
14.8
K.W.
2.0
2.0
2.1
2.0
2.0
2.0
2.0
2.1
2.0
2.0
2.0
2.0
2.1
2.0
2.0
T.C.
18.1
18.7
18.3
20.1
22.6
19.8
20.2
19.0
21.1
23.6
21.5
21.8
19.7
22.0
24.5
14.3
S.C.
18.2
17.0
13.7
13.7
11.2
19.9
19.2
15.7
16.2
12.8
21.7
21.4
17.7
18.8
K.W.
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
T.C.
16.7
17.2
16.8
18.6
21.2
18.2
18.6
17.4
19.4
21.9
19.8
20.0
18.0
20.2
22.7
S.C.
16.8
16.1
13.0
13.0
10.7
18.4
17.8
15.0
15.4
12.2
20.0
19.5
17.0
17.9
13.8
K.W.
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
T.C.
15.3
15.7
15.3
17.1
19.7
16.7
17.0
15.8
17.7
20.3
18.1
18.3
16.3
18.4
20.9
S.C.
15.4
15.2
12.4
12.3
10.2
16.9
16.4
14.3
14.7
11.7
18.3
17.7
16.3
17.0
13.3
K.W.
3.0
3.1
3.1
3.1
3.0
3.0
3.1
3.1
3.1
3.0
3.0
3.1
3.1
3.1
3.0
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA08B
MA08B
MV12B
MV12B
AV24
F*FP030
–
–
–
–
Coil
FC/MC24B
FC/MC30B
FC/MC24B
FC/MC30B
–
–
FC/MC/PC/UC24
FC/MC/PC/UC30
HC30
HD24
Unitary Products Group
T.C.
1.00
1.00
1.03
1.03
1.03
1.00
1.00
1.00
1.00
0.98
S.C.
1.00
1.00
1.02
1.02
1.02
1.00
1.00
1.00
1.00
1.06
KW
1.00
1.00
0.96
0.96
0.96
1.00
1.00
1.00
1.00
1.00
Page 7
Variable Speed
Furnace
PV8*A12
PV9*A12
PV8*A12
PV9*A12
Coil
T.C.
S.C.
KW
FC/MC/PC24A
FC/MC/PC24A
FC/MC/PC30A
FC/MC/PC30A
1.00
1.00
1.00
1.00
0.96
0.96
0.96
0.96
1.03
1.07
1.03
1.07
11
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB03011
INDOOR COIL MODEL NO.
FC/MC/PC/UC36
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
ID CFM
800
1000
1200
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
27.1
29.1
29.2
33.5
37.3
29.0
30.7
30.7
34.8
38.8
31.0
32.2
32.2
36.1
40.2
19.7
S.C.
26.7
23.3
20.0
20.6
16.9
28.7
26.6
22.6
23.0
18.3
30.7
29.9
25.1
25.3
K.W.
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
T.C.
26.2
27.9
27.8
31.7
35.7
28.1
29.3
29.1
33.0
37.0
29.9
30.7
30.5
34.3
38.2
S.C.
25.9
22.9
19.3
19.9
16.2
27.7
26.0
21.7
22.3
17.6
29.6
29.0
24.1
24.7
19.1
K.W.
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
T.C.
25.4
26.6
26.3
29.9
34.1
27.1
27.9
27.5
31.2
35.2
28.8
29.1
28.7
32.5
36.2
S.C.
25.1
22.6
18.5
19.1
15.6
26.8
25.3
20.8
21.7
17.0
28.4
28.1
23.2
24.2
18.4
K.W.
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
T.C.
24.5
25.4
24.8
28.1
32.6
26.1
26.5
25.9
29.4
33.4
27.7
27.6
27.0
30.7
34.2
S.C.
24.3
22.3
17.7
18.4
14.9
25.8
24.7
19.9
21.0
16.4
27.3
27.2
22.2
23.6
17.8
K.W.
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
T.C.
23.1
23.7
23.4
26.3
30.3
24.5
24.8
24.3
27.4
30.4
26.0
26.0
25.2
28.4
30.4
19.5
S.C.
22.9
21.4
17.2
17.8
14.2
24.3
23.5
19.4
20.2
16.9
25.7
25.6
21.6
22.7
K.W.
3.1
3.1
3.1
3.0
3.0
3.1
3.1
3.1
3.0
3.0
3.1
3.0
3.1
3.0
3.0
T.C.
21.7
22.0
21.9
24.6
28.2
23.0
23.2
22.6
25.4
27.4
24.3
24.4
23.4
26.1
26.7
S.C.
21.5
20.6
16.8
17.2
13.5
22.8
22.4
18.9
19.5
17.4
24.0
24.1
21.1
21.8
21.2
K.W.
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
T.C.
20.3
20.4
20.5
22.9
26.0
21.5
21.6
21.0
23.4
24.5
22.7
22.9
21.6
23.9
23.1
S.C.
20.1
19.8
16.4
16.5
12.9
21.3
21.2
18.4
18.8
17.9
22.4
22.7
20.5
21.0
22.9
K.W.
3.8
3.8
3.8
3.8
3.7
3.8
3.8
3.8
3.8
3.7
3.8
3.8
3.8
3.8
3.7
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA12B
MV12B
MV16C
AHP30
AHP36
F2FP036
AV36
–
–
12
Coil
FC/MC36B
FC/MC36B
FC/MC36C
–
–
–
–
HC36
HD36
T.C.
1.00
0.99
0.99
S.C.
1.00
1.00
1.00
KW
1.00
0.96
0.96
1.00
1.01
1.03
1.01
1.01
0.99
1.00
1.00
0.99
1.02
1.00
1.00
0.96
1.00
1.00
Variable Speed
Furnace
PV8*A12
PV9*A12
PV8*B16
P(C,V)9*B12
PV8*C16
P(C,V)9*C16
Page 8
Coil
T.C.
S.C.
KW
FC/MC/PC36A
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC36C
FC/MC/PC36C
1.02
1.01
1.02
1.01
1.02
1.02
0.98
0.97
0.98
0.97
0.98
0.98
1.01
1.01
1.03
1.01
1.03
1.03
Unitary Products Group
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB03611
INDOOR COIL MODEL NO.
FC/MC/PC/UC36
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
ID CFM
1000
1200
1400
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
33.4
35.6
36.5
41.1
44.1
35.4
36.5
37.1
41.6
44.5
37.4
37.5
37.7
42.1
44.9
24.0
S.C.
33.8
31.2
26.2
26.6
20.9
35.8
34.2
28.4
28.9
22.5
37.8
37.1
30.7
31.3
K.W.
2.2
2.2
2.3
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.3
T.C.
31.9
33.9
34.4
39.0
42.1
33.7
34.9
35.0
39.4
42.4
35.5
35.9
35.5
39.8
42.7
S.C.
32.3
30.4
25.4
25.7
20.2
34.1
33.1
27.6
28.0
21.7
35.9
35.8
29.8
30.3
23.2
K.W.
2.5
2.5
2.5
2.5
2.6
2.5
2.5
2.5
2.5
2.6
2.5
2.5
2.5
2.6
2.6
T.C.
30.4
32.2
32.4
36.9
40.0
32.0
33.2
32.8
37.2
40.3
33.5
34.3
33.3
37.5
40.6
S.C.
30.8
29.5
24.6
24.8
19.6
32.4
32.0
26.7
27.0
21.0
33.9
34.4
28.9
29.3
22.5
K.W.
2.8
2.8
2.8
2.9
2.9
2.8
2.8
2.8
2.9
2.9
2.8
2.8
2.9
2.9
2.9
T.C.
29.0
30.4
30.3
34.8
38.0
30.3
31.5
30.6
35.0
38.2
31.6
32.7
31.0
35.2
38.4
S.C.
29.3
28.7
23.8
23.9
18.9
30.7
30.8
25.9
26.1
20.3
32.0
33.0
28.0
28.3
21.7
K.W.
3.1
3.1
3.1
3.2
3.2
3.1
3.1
3.2
3.2
3.2
3.1
3.1
3.2
3.2
3.2
T.C.
27.6
28.9
28.2
32.0
35.1
28.7
29.7
28.5
32.2
35.3
29.9
30.6
28.7
32.4
35.5
20.6
S.C.
27.9
26.8
22.6
22.9
18.0
29.1
28.6
24.7
24.9
19.3
30.2
30.5
26.7
26.9
K.W.
3.6
3.5
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
T.C.
26.3
27.3
26.2
29.4
32.4
27.2
28.0
26.3
29.5
32.5
28.2
28.7
26.5
29.7
32.6
S.C.
26.6
24.9
21.6
21.9
17.1
27.5
26.4
23.5
23.7
18.3
28.5
27.9
25.4
25.5
19.6
K.W.
4.0
4.0
4.0
4.1
4.1
4.0
4.0
4.0
4.1
4.1
4.0
4.0
4.0
4.1
4.1
T.C.
24.9
25.8
24.2
26.7
29.6
25.7
26.3
24.2
26.8
29.7
26.5
26.7
24.2
26.9
29.8
S.C.
25.2
23.0
20.5
20.9
16.2
26.0
24.2
22.3
22.5
17.3
26.8
25.4
24.1
24.1
18.5
K.W.
4.5
4.4
4.4
4.5
4.5
4.5
4.4
4.4
4.5
4.5
4.5
4.5
4.5
4.5
4.5
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA12B
MV16C
AHP42
AV/SV36
AV/SV48
F2FP036
F2FP042
–
–
Coil
FC/MC36B
FC/MC36C
–
–
–
–
–
HC36
HD36
Unitary Products Group
T.C.
0.98
1.03
0.98
S.C.
0.98
1.03
0.98
KW
1.00
0.96
1.00
1.02
1.00
1.01
1.01
0.99
1.03
1.00
1.00
0.98
1.00
0.96
1.00
1.00
1.00
1.00
Page 9
Variable Speed
Furnace
PV8*A12
PV9*A12
PV8*B16
P(C,V)9*B12
PV8*C16
PV8*C20
P(C,V)9*C16
P(C,V)9*C20
Coil
T.C.
S.C.
KW
FC/MC/PC36A
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC36C
FC/MC/PC36C
FC/MC/PC36C
FC/MC/PC36C
0.99
0.98
0.99
0.98
0.99
0.99
0.99
0.99
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
1.02
1.02
1.03
1.02
1.03
1.03
1.03
1.03
13
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB04211
INDOOR COIL MODEL NO.
FC/MC/PC/UC48
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM
1200
1400
1600
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
41.7
43.4
41.3
47.3
50.7
44.2
44.8
42.6
48.5
50.4
46.8
46.3
44.0
49.8
50.1
27.0
65
75
85
95
105
115
125
S.C.
38.3
36.4
31.1
30.9
24.9
40.5
40.1
33.1
33.6
26.0
42.8
43.8
35.0
36.3
K.W.
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
T.C.
40.0
41.2
39.4
44.8
47.5
42.3
42.8
40.5
46.0
47.5
44.7
44.4
41.7
47.2
47.4
S.C.
36.7
35.5
29.9
29.9
23.4
38.8
38.5
31.9
32.5
24.6
40.8
41.6
34.0
35.0
25.9
K.W.
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
3.0
T.C.
38.3
39.1
37.5
42.4
44.4
40.4
40.8
38.4
43.5
44.6
42.5
42.6
39.3
44.6
44.8
S.C.
35.2
34.5
28.6
29.0
21.9
37.0
37.0
30.8
31.4
23.3
38.8
39.5
33.0
33.8
24.7
K.W.
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
T.C.
36.7
36.9
35.6
40.0
41.3
38.5
38.9
36.3
41.0
41.7
40.4
40.8
37.0
42.0
42.1
S.C.
33.6
33.5
27.3
28.0
20.4
35.2
35.4
29.7
30.3
21.9
36.8
37.3
32.0
32.6
23.5
K.W.
3.6
3.6
3.6
3.6
3.7
3.7
3.6
3.6
3.6
3.7
3.7
3.6
3.6
3.6
3.7
T.C.
35.5
34.9
33.2
37.5
38.9
36.3
36.6
33.8
38.4
39.3
37.1
38.4
34.5
39.3
39.7
23.0
S.C.
32.5
31.7
26.3
27.1
19.9
33.2
33.4
28.3
29.4
21.5
33.9
35.1
30.4
31.6
K.W.
4.2
4.1
4.1
4.1
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
T.C.
34.4
33.0
30.9
35.0
36.5
34.2
34.5
31.4
35.8
36.9
34.0
36.0
32.0
36.7
37.3
S.C.
31.5
30.0
25.2
26.2
19.4
31.2
31.5
27.0
28.4
21.0
31.0
33.0
28.8
30.7
22.6
K.W.
4.7
4.6
4.6
4.6
4.7
4.6
4.6
4.6
4.7
4.7
4.6
4.7
4.6
4.7
4.7
T.C.
33.3
31.0
28.6
32.6
34.1
32.1
32.3
29.1
33.3
34.5
30.8
33.6
29.5
34.0
34.9
S.C.
30.4
28.3
24.2
25.2
19.0
29.3
29.5
25.8
27.5
20.5
28.1
30.8
27.3
29.8
22.1
K.W.
5.1
5.1
5.1
5.1
5.2
5.1
5.1
5.1
5.1
5.2
5.1
5.2
5.1
5.2
5.2
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
MA16C
FC/MC48C
1.00
1.00
1.00
MA14D
FC/MC48D
1.00
1.00
1.00
MA16C
FC60C
1.00
1.00
1.00
MV16C
FC/MC48C
1.02
1.02
0.96
MV20D
FC/MC48D
1.02
1.02
0.96
AHP/SHP48
–
1.00
1.00
1.00
AV/SV48
–
1.01
1.02
0.96
–
HC42
0.98
0.96
1.00
–
HD48
0.98
0.98
1.00
14
Variable Speed
Furnace
PV8*C16
PV8*C20
P(C,V)9*C16
P(C,V)9*C20
P(C,V)9*D20
Page 10
Coil
T.C.
S.C.
KW
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
1.00
1.00
1.00
1.00
1.00
0.90
0.90
0.90
0.90
0.90
1.01
1.03
1.03
1.01
1.03
Unitary Products Group
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB04811
INDOOR COIL MODEL NO.
FC/MC/PC/UC60
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
ID CFM
1400
1600
1800
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
49.5
49.2
48.3
52.5
56.2
51.1
49.8
48.8
53.3
56.5
52.7
50.5
49.3
54.0
56.9
30.2
S.C.
45.3
42.7
35.3
35.1
27.3
46.5
44.4
37.6
37.4
28.8
47.7
46.1
39.9
39.8
K.W.
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
T.C.
46.0
46.5
45.6
50.2
53.6
47.7
47.4
46.2
50.8
53.9
49.3
48.2
46.9
51.5
54.2
S.C.
43.1
41.0
34.1
34.2
26.5
44.4
43.0
36.4
36.5
27.9
45.8
45.1
38.8
38.8
29.3
K.W.
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.3
T.C.
42.6
43.9
42.8
47.9
51.1
44.2
45.0
43.6
48.4
51.2
45.9
46.0
44.4
49.0
51.4
S.C.
40.9
39.2
32.8
33.4
25.7
42.4
41.6
35.3
35.6
27.1
43.9
44.0
37.7
37.9
28.4
K.W.
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.7
T.C.
39.1
41.2
40.1
45.6
48.5
40.8
42.5
41.0
46.0
48.6
42.4
43.8
42.0
46.4
48.7
S.C.
38.8
37.5
31.5
32.5
25.0
40.4
40.2
34.1
34.7
26.3
42.0
42.9
36.6
36.9
27.6
K.W.
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.1
T.C.
36.8
38.7
37.4
42.1
44.9
38.3
40.0
38.2
42.5
44.9
39.8
41.2
38.9
42.9
44.8
26.5
S.C.
36.4
35.9
30.3
31.2
23.8
37.9
38.1
32.5
33.3
25.1
39.3
40.3
34.6
35.5
K.W.
4.6
4.6
4.5
4.6
4.6
4.6
4.6
4.5
4.6
4.6
4.6
4.6
4.6
4.6
4.6
T.C.
34.5
36.3
34.8
38.8
41.4
35.9
37.5
35.4
39.2
41.2
37.2
38.6
35.9
39.6
41.1
S.C.
34.2
34.3
29.2
29.9
22.7
35.5
36.0
30.9
32.0
24.0
36.8
37.7
32.6
34.1
25.4
K.W.
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
T.C.
32.3
33.9
32.2
35.5
37.9
33.5
35.0
32.6
35.8
37.6
34.6
36.1
32.9
36.2
37.3
S.C.
31.9
32.7
28.0
28.6
21.5
33.1
33.9
29.3
30.6
22.9
34.3
35.2
30.6
32.7
24.3
K.W.
5.7
5.6
5.6
5.6
5.6
5.7
5.6
5.6
5.6
5.7
5.7
5.6
5.6
5.6
5.7
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA20D
MA20D
MV20D
MV20D
MV20D
AHP/SHP48
AHP/SHP60
AV/SV48
F*FV060
–
–
–
Coil
FC/MC60D
MC61
FC/MC60D
FC60C
MC61D
–
–
–
–
HC60
HD60
MC61
Unitary Products Group
T.C.
1.00
1.01
1.02
1.01
1.03
1.00
1.00
1.01
1.01
1.00
1.00
1.01
S.C.
1.00
1.02
1.02
1.01
1.03
0.96
0.96
1.01
0.98
0.98
0.97
1.02
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
Page 11
Variable Speed
Furnace
P(C,V)9*D20
P(C,V)9*D20
Coil
T.C.
S.C.
KW
FC/MC/PC60D
MC61D
1.00
1.01
0.93
0.94
1.01
1.01
15
246726-YTG-D-0507
http://www.rezine.net
COOLING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
YZB06011
INDOOR COIL MODEL NO.
FC/MC/PC/UC60
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
ID CFM
1600
1800
2000
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
57
57
62
62
67
72
T.C.
56.1
58.8
57.7
63.9
68.4
57.3
59.7
59.3
65.2
68.0
58.6
60.5
61.0
66.4
67.6
38.5
S.C.
53.3
50.1
41.5
41.6
32.1
56.2
53.6
44.4
44.3
35.3
58.0
57.1
47.3
47.1
K.W.
3.5
3.5
3.5
3.5
3.6
3.5
3.5
3.5
3.5
3.6
3.5
3.5
3.5
3.5
3.6
T.C.
53.7
55.5
54.6
60.7
65.0
55.1
56.5
55.9
61.8
65.1
56.6
57.5
57.2
62.9
65.2
S.C.
50.9
48.6
40.2
40.4
31.3
53.5
51.9
42.9
43.1
34.1
56.0
55.1
45.5
45.9
36.8
K.W.
4.0
4.0
4.0
4.0
4.1
4.0
4.0
4.0
4.0
4.1
4.0
4.0
4.0
4.0
4.1
T.C.
51.3
52.2
51.6
57.4
61.7
52.9
53.4
52.5
58.4
62.2
54.5
54.6
53.4
59.3
62.8
S.C.
48.5
47.1
38.9
39.2
30.5
50.7
50.1
41.4
41.9
32.8
52.9
53.1
43.8
44.6
35.1
K.W.
4.5
4.5
4.5
4.5
4.6
4.5
4.5
4.5
4.5
4.6
4.5
4.5
4.5
4.5
4.6
T.C.
49.0
48.9
48.6
54.2
58.4
50.7
50.3
49.1
55.0
59.4
52.5
51.6
49.6
55.8
60.3
S.C.
46.0
45.6
37.6
38.0
29.7
47.9
48.4
39.8
40.7
31.5
49.8
51.1
42.1
43.4
33.3
K.W.
5.0
4.9
4.9
5.0
5.1
5.0
5.0
4.9
5.0
5.1
5.0
5.0
5.0
5.0
5.1
T.C.
46.2
46.1
44.9
50.5
54.1
47.8
47.3
45.4
51.2
55.0
49.4
48.5
45.9
52.0
56.0
31.8
S.C.
43.3
43.3
35.9
36.6
28.3
45.1
45.4
38.0
39.2
30.1
46.9
47.5
40.0
41.8
K.W.
5.6
5.6
5.6
5.7
5.8
5.6
5.6
5.6
5.7
5.8
5.7
5.7
5.6
5.7
5.8
T.C.
43.5
43.4
41.3
46.8
49.9
44.9
44.4
41.8
47.5
50.8
46.4
45.4
42.3
48.2
51.8
S.C.
40.6
41.0
34.2
35.3
26.9
42.3
42.5
36.2
37.7
28.6
44.0
44.0
38.1
40.2
30.4
K.W.
6.3
6.3
6.2
6.3
6.4
6.3
6.3
6.3
6.3
6.4
6.3
6.3
6.3
6.4
6.4
T.C.
40.8
40.6
37.7
43.2
45.7
42.1
41.5
38.2
43.9
46.6
43.4
42.3
38.8
44.5
47.5
S.C.
37.9
38.7
32.6
34.0
25.5
39.5
39.6
34.3
36.3
27.2
41.1
40.5
36.1
38.6
28.9
K.W.
6.9
6.9
6.9
7.0
7.1
6.9
7.0
6.9
7.0
7.1
7.0
7.0
6.9
7.0
7.1
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
MA20D
MV20D
MV20D
AHP/SHP60
AV/SV60
F*FV060
–
16
Coil
MC61
FC/MC60D
MC61D
–
–
–
MC61
T.C.
1.00
0.98
0.99
1.00
0.98
0.97
1.00
S.C.
1.00
0.98
0.99
0.98
0.98
0.95
1.00
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
Variable Speed
Furnace
P(C,V)9*D20
P(C,V)9*D20
Page 12
Coil
T.C.
S.C.
KW
FC/MC/PC60D
MC61D
0.96
0.98
0.92
0.94
1.00
1.00
Unitary Products Group
246726-YTG-D-0507
http://www.rezine.net
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
YZB01811
FC/MC/PC/UC18
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
60
22.9
1.8
3.7
23.7
1.6
4.3
24.4
1.4
5.0
70
21.5
2.0
3.1
22.3
1.8
3.6
23.1
1.6
4.2
60
47
40
30
17
10
450
600
750
C.O.P.
80
20.2
2.2
2.6
21.0
2.0
3.0
21.8
1.8
3.6
60
20.9
1.8
3.4
21.5
1.6
3.9
22.2
1.4
4.6
70
19.4
2.0
2.9
20.0
1.8
3.3
20.6
1.6
3.7
80
17.9
2.1
2.5
18.5
2.0
2.7
19.0
1.8
3.1
60
18.7
1.6
3.3
19.4
1.5
3.7
20.1
1.4
4.2
70
17.0
1.8
2.8
17.8
1.7
3.1
18.7
1.6
3.5
80
15.3
1.9
2.4
16.3
1.8
2.6
17.2
1.7
2.9
60
15.8
1.4
3.4
16.7
1.3
3.7
17.6
1.3
4.1
70
14.1
1.5
2.7
14.8
1.4
3.0
15.6
1.4
3.3
80
12.3
1.7
2.2
13.0
1.6
2.4
13.6
1.5
2.7
60
12.5
1.4
2.6
13.3
1.3
2.9
14.1
1.3
3.2
70
10.7
1.5
2.1
11.6
1.5
2.3
12.5
1.4
2.6
80
9.0
1.6
1.6
9.9
1.6
1.8
10.8
1.5
2.1
60
11.5
1.4
2.4
12.0
1.4
2.6
12.5
1.3
2.8
70
10.0
1.5
1.9
10.5
1.5
2.1
10.9
1.4
2.2
80
8.6
1.7
1.5
8.9
1.6
1.6
9.2
1.6
1.7
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA08B
MV12B
AHP18
AV24
F*FP024
–
–
Coil
FC/MC18B
FC/MC18B
–
–
–
HC24
HD24
Unitary Products Group
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
0.90
0.85
0.90
0.86
0.99
0.89
0.89
KW
1.00
1.05
1.00
1.04
1.01
1.00
1.00
Page 13
Variable Speed
Furnace
PV8*A12
PV9*A12
P(C,V)9*B12
Coil
T.C.
S.C.
KW
FC/MC/PC18A
FC/MC/PC18A
FC/MC/PC18B
1.00
1.00
1.00
0.85
0.86
0.85
1.05
1.04
1.05
17
246726-YTG-D-0507
http://www.rezine.net
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
60
47
40
30
17
10
YZB02411
AHP24
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
29.0
2.2
3.8
30.7
2.0
4.5
32.5
1.8
5.4
70
28.2
2.6
3.2
29.7
2.3
3.8
31.2
2.0
4.5
80
27.5
2.9
2.8
28.7
2.6
3.2
29.8
2.3
3.8
60
24.0
2.0
3.5
24.6
1.8
3.9
25.3
1.7
4.4
70
23.1
2.2
3.1
24.0
2.0
3.4
24.9
1.9
3.9
80
22.1
2.4
2.7
23.4
2.2
3.0
24.6
2.1
3.5
60
21.3
1.9
3.3
21.9
1.7
3.7
22.5
1.6
4.2
70
20.6
2.1
2.9
21.3
1.9
3.2
22.0
1.8
3.6
80
20.0
2.3
2.5
20.8
2.2
2.8
21.6
2.0
3.1
60
17.1
1.9
2.7
18.0
1.7
3.1
19.0
1.6
3.6
70
16.6
1.9
2.6
17.4
1.8
2.9
18.2
1.6
3.3
80
16.1
2.0
2.4
16.7
1.8
2.7
17.3
1.7
3.0
60
14.1
1.7
2.4
14.5
1.6
2.7
14.9
1.4
3.0
70
13.8
1.9
2.2
14.2
1.7
2.4
14.6
1.6
2.6
80
13.4
2.0
1.9
13.9
1.9
2.1
14.4
1.8
2.3
60
12.6
1.6
2.3
12.8
1.5
2.5
13.1
1.4
2.8
70
12.1
1.9
1.9
12.5
1.7
2.1
12.9
1.6
2.3
80
11.7
2.1
1.6
12.2
2.0
1.8
12.7
1.8
2.0
600
800
1000
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA08B
MA08B
MV12B
MV12B
AV24
F*FP30
–
–
–
–
18
Coil
FC/MC24B
FC/MC30B
FC/MC24B
FC/MC30B
–
–
FC/MC/PC/UC24
FC/MC/PC/UC30
HC30
HD24
T.C.
1.00
1.00
0.98
0.98
0.97
0.99
1.00
1.00
1.00
1.00
S.C.
1.00
1.00
0.98
0.98
0.90
0.99
1.00
1.00
1.00
1.00
KW
1.00
1.00
1.00
1.00
1.07
1.00
1.00
1.00
1.00
1.00
Variable Speed
Furnace
PV8*A12
PV8*A12
PV8*A12
PV8*A12
PV9*A12
PV9*A12
Page 14
Coil
T.C.
S.C.
KW
FC/MC/PC24A
FC/MC/PC30A
HC30
HD24
FC/MC/PC24A
FC/MC/PC30A
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.92
0.92
1.00
1.00
1.00
1.00
1.05
1.05
Unitary Products Group
246726-YTG-D-0507
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
http://www.rezine.net
YZB03011
FC/MC/PC/UC36
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
34.3
2.5
4.0
35.3
2.4
4.4
36.3
2.2
4.8
70
33.3
2.8
3.5
34.3
2.6
3.8
35.3
2.5
4.2
80
32.3
3.1
3.1
33.3
2.9
3.4
34.3
2.7
3.7
60
29.8
2.4
3.6
30.7
2.3
3.9
31.5
2.2
4.3
70
29.3
2.7
3.2
30.0
2.6
3.4
30.7
2.4
3.7
80
28.8
3.0
2.8
29.3
2.8
3.1
29.9
2.6
3.3
60
27.7
2.4
3.4
28.6
2.3
3.7
29.5
2.2
4.0
70
27.1
2.7
3.0
27.9
2.6
3.2
28.7
2.4
3.5
80
26.6
3.0
2.6
27.2
2.8
2.8
27.8
2.7
3.1
60
22.3
2.2
2.9
23.7
2.2
3.2
25.1
2.1
3.5
70
22.0
2.5
2.6
23.3
2.4
2.9
24.6
2.3
3.1
80
21.7
2.7
2.4
22.9
2.6
2.6
24.1
2.6
2.8
60
17.2
2.2
2.3
18.2
2.1
2.5
19.2
2.1
2.7
70
17.4
2.4
2.1
18.3
2.4
2.3
19.2
2.3
2.4
80
17.6
2.7
1.9
18.4
2.6
2.1
19.1
2.5
2.2
60
16.4
2.1
2.3
17.2
2.1
2.4
18.0
2.1
2.5
70
15.9
2.4
2.0
16.7
2.3
2.1
17.5
2.3
2.3
80
15.4
2.6
1.7
16.2
2.6
1.9
17.0
2.5
2.0
60
47
40
30
17
10
800
1000
1200
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA12B
MV12B
MV16C
AHP30
AHP36
AV36
F*FP036
–
–
Coil
FC/MC36B
FC/MC36B
FC/MC36C
–
–
–
–
HC36
HD36
Unitary Products Group
T.C.
1.00
0.98
0.98
S.C.
1.00
0.98
0.98
KW
1.00
1.00
1.00
1.00
0.97
0.99
1.00
1.00
1.00
0.91
0.99
1.00
1.00
1.00
1.06
1.00
1.00
1.00
Page 15
Variable Speed
Furnace
PV8*A12
PV8*A12
PV8*B16
PV8*B16
PV8*C16
PV9*A12
PV9*A12
P(C,V)9*B12
P(C,V)9*C16
Coil
T.C.
S.C.
KW
FC/MC/PC36A
HD36
FC/MC/PC36B
HC36
FC/MC/PC36C
FC/MC/PC36A
HD36
FC/MC/PC36B
FC/MC/PC36C
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.93
0.96
0.93
0.98
1.00
1.00
1.00
1.00
1.00
1.04
1.02
1.04
1.00
19
246726-YTG-D-0507
http://www.rezine.net
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
60
47
40
30
17
10
YZB03611
FC/MC/PC/UC36
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
44.8
3.2
4.1
45.7
3.1
4.4
46.5
2.9
4.7
70
42.6
3.5
3.6
43.6
3.3
3.8
44.5
3.2
4.1
80
40.5
3.8
3.2
41.5
3.6
3.4
42.6
3.5
3.6
60
38.8
3.1
3.6
38.6
3.0
3.8
38.4
2.8
4.1
70
36.6
3.4
3.2
37.0
3.2
3.4
37.4
3.1
3.6
80
34.3
3.7
2.8
35.4
3.5
3.0
36.5
3.4
3.2
60
35.0
3.1
3.3
35.4
3.0
3.5
35.9
2.8
3.7
70
33.4
3.4
2.9
33.9
3.3
3.0
34.4
3.1
3.2
80
31.8
3.7
2.5
32.4
3.6
2.7
33.0
3.4
2.8
60
31.7
3.0
3.1
31.7
2.9
3.2
31.7
2.8
3.3
70
29.9
3.3
2.7
30.1
3.2
2.8
30.3
3.1
2.9
80
28.0
3.6
2.3
28.5
3.4
2.4
28.9
3.3
2.5
60
25.3
2.9
2.5
25.8
2.8
2.7
26.4
2.7
2.8
70
23.8
3.1
2.2
24.4
3.1
2.3
25.0
3.0
2.4
80
22.4
3.3
2.0
23.0
3.3
2.0
23.5
3.3
2.1
60
18.2
2.8
1.9
19.7
2.7
2.1
21.3
2.6
2.4
70
19.2
3.1
1.8
19.4
3.0
1.9
19.7
2.9
2.0
80
20.1
3.4
1.7
19.1
3.3
1.7
18.1
3.2
1.7
1000
1200
1400
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA12B
MV12B
AHP42
AV/SV36
AV/SV48
F*FP036
F*FP042
–
–
20
Coil
FC/MC36B
FC/MC36B
–
–
–
–
–
HC36
HD36
T.C.
1.00
1.00
1.00
S.C.
0.97
0.97
0.97
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.93
1.00
1.00
0.97
0.97
1.04
1.00
1.00
1.00
1.00
Variable Speed
Furnace
PV8*A12
PV8*B16
PV8*B16
PV8*B16
PV8*C16
PV8*C20
PV9*A12
P(C,V)9*B12
P(C,V)9*B12
P(C,V)9*B12
P(C,V)9*C16
P(C,V)9*C20
Page 16
Coil
T.C.
S.C.
KW
FC/MC/PC36A
FC/MC/PC36B
HC36
HD36
FC/MC/PC36C
FC/MC/PC36C
FC/MC/PC36A
FC/MC/PC36B
HC36
HD36
FC/MC/PC36C
FC/MC/PC36C
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.97
0.97
0.97
0.97
0.97
0.97
0.95
0.95
0.97
0.97
0.97
0.97
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.01
1.00
1.00
1.00
1.00
Unitary Products Group
246726-YTG-D-0507
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
http://www.rezine.net
YZB04211
FC/MC/PC/UC48
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
47.3
2.2
6.3
48.3
2.1
6.7
49.3
2.0
7.2
70
46.4
2.4
5.6
47.5
2.3
6.0
48.6
2.2
6.4
80
45.6
2.6
5.0
46.7
2.6
5.4
47.9
2.5
5.7
60
44.3
3.9
3.3
45.7
4.0
3.3
47.1
4.1
3.3
70
42.0
3.4
3.6
43.0
3.4
3.7
44.0
3.5
3.7
80
39.8
3.0
3.9
40.3
2.9
4.1
40.8
2.8
4.3
60
39.9
2.6
4.5
41.6
2.5
4.9
43.3
2.4
5.2
70
38.3
2.9
3.9
39.8
2.8
4.2
41.3
2.7
4.5
80
36.8
3.1
3.4
38.0
3.0
3.7
39.3
3.0
3.9
60
33.5
2.8
3.5
34.3
2.7
3.7
35.2
2.6
3.9
70
32.0
3.0
3.1
33.2
3.0
3.3
34.4
2.9
3.5
80
30.6
3.3
2.7
32.1
3.3
2.9
33.7
3.2
3.1
60
29.1
3.0
2.8
29.5
3.0
2.9
29.8
2.9
3.0
70
28.3
3.4
2.5
28.4
3.3
2.5
28.5
3.2
2.6
80
27.4
3.7
2.2
27.3
3.6
2.2
27.2
3.5
2.3
60
24.1
3.2
2.2
24.9
3.1
2.3
25.8
3.1
2.5
70
22.6
3.5
1.9
23.1
3.4
2.0
23.6
3.4
2.1
80
21.2
3.8
1.6
21.3
3.8
1.7
21.3
3.7
1.7
60
47
40
30
17
10
1200
1400
1600
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA14D
MA16C
MV16C
MV20D
AHP/SHP48
AV/SV48
–
–
Coil
FC/MC48D
FC/MC48C
FC/MC48C
FC/MC48D
–
–
HC48
HD48
Unitary Products Group
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
0.98
0.98
0.98
0.98
0.98
0.94
0.97
0.97
KW
1.00
1.00
1.00
1.00
1.00
1.04
1.00
1.00
Page 17
Variable Speed
Furnace
PV8*C16
PV8*C20
PV8*C20
PV8*C20
P(C,V)9*C16
P(C,V)9*C20
P(C,V)9*C20
P(C,V)9*C20
P(C,V)9*D20
Coil
T.C.
S.C.
KW
FC/MC/PC48C
FC/MC/PC48C
HC48
HD48
FC/MC/PC48C
FC/MC/PC48C
HC48
HD48
FC/MC/PC48D
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.97
0.97
0.97
0.97
0.95
0.95
0.97
0.97
0.95
1.00
1.00
1.00
1.00
1.02
1.02
1.00
1.00
1.02
21
246726-YTG-D-0507
http://www.rezine.net
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
60
47
40
30
17
10
YZB04811
FC/MC/PC/UC60
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
59.1
4.9
3.6
59.6
4.7
3.7
60.2
4.5
3.9
70
61.4
4.4
4.1
61.9
4.2
4.3
62.4
4.1
4.5
80
63.7
4.0
4.7
64.1
3.8
4.9
64.6
3.7
5.2
60
47.3
3.9
3.6
49.6
3.9
3.7
51.8
3.9
3.9
70
49.4
4.3
3.3
51.0
4.3
3.5
52.6
4.2
3.7
80
51.5
4.8
3.2
52.4
4.6
3.3
53.3
4.5
3.5
60
48.4
4.0
3.6
49.2
3.8
3.8
49.9
3.7
3.9
70
44.4
4.3
3.0
45.1
4.2
3.1
45.9
4.1
3.2
80
40.3
4.6
2.6
41.1
4.6
2.6
41.8
4.6
2.7
60
36.4
3.8
2.8
39.7
3.8
3.1
42.9
3.8
3.4
70
33.4
4.2
2.4
36.5
4.2
2.6
39.6
4.2
2.8
80
30.5
4.6
2.0
33.4
4.6
2.1
36.3
4.6
2.3
60
37.0
4.0
2.7
36.1
3.9
2.7
35.2
3.8
2.7
70
34.4
4.4
2.3
33.2
4.2
2.3
32.0
4.1
2.3
80
31.8
4.8
2.0
30.3
4.6
1.9
28.8
4.4
1.9
60
32.1
3.9
2.4
31.1
3.8
2.4
30.2
3.8
2.4
70
28.3
4.3
1.9
28.1
4.2
1.9
28.0
4.2
2.0
80
24.6
4.7
1.5
25.2
4.6
1.6
25.7
4.6
1.7
1400
1600
1800
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA16C
MA20D
MA20D
MV16C
MV20D
MV20D
AHP/SHP48
AHP/SHP60
AV/SV48
F*FV060
–
–
–
22
Coil
FC60C
FC/MC60D
MC61D
FC/MC60C
FC/MC60D
MC61D
–
–
–
–
HC60
HD60
MC61
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
0.96
0.96
0.96
0.94
0.94
0.94
0.96
0.96
0.92
0.99
0.96
0.96
0.96
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.03
1.00
1.00
1.00
1.00
Variable Speed
Furnace
PV8*C20
PV8*C20
PV8*C20
P(C,V)9*C20
P(C,V)9*D20
P(C,V)9*D20
P(C,V)9*D20
P(C,V)9*D20
Page 18
Coil
T.C.
S.C.
KW
FC/PC60C
HC60
HD60
FC/PC60C
FC/MC/PC60D
HC60
HD60
MC61D
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.94
0.94
0.94
0.93
0.93
0.94
0.94
0.93
1.00
1.00
1.00
1.00
1.01
1.00
1.00
1.01
Unitary Products Group
246726-YTG-D-0507
HEATING PERFORMANCE DATA
OUTDOOR UNIT MODEL NO.
INDOOR COIL MODEL NO.
AIR TEMP.
ENTERING
OUTDOOR UNIT
http://www.rezine.net
YZB06011
FC/MC/PC/UC60
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
MBTUH
KW
C.O.P.
60
71.3
4.7
4.5
70.8
4.5
4.6
70.3
4.4
4.7
70
68.9
5.2
3.9
69.1
5.0
4.1
69.2
4.8
4.2
80
66.6
5.6
3.5
67.4
5.5
3.6
68.2
5.3
3.8
60
57.9
4.4
3.8
59.0
4.3
4.0
60.0
4.2
4.2
70
56.8
4.9
3.4
57.5
4.8
3.5
58.2
4.6
3.7
80
55.8
5.4
3.0
56.0
5.2
3.1
56.3
5.1
3.2
60
49.9
4.2
3.4
51.6
4.2
3.6
53.3
4.1
3.8
70
49.6
4.8
3.1
51.0
4.6
3.2
52.4
4.5
3.4
80
49.3
5.3
2.7
50.3
5.1
2.9
51.4
5.0
3.0
60
43.3
4.1
3.1
42.1
4.0
3.1
40.9
3.8
3.1
70
43.3
4.6
2.8
40.9
4.4
2.7
38.6
4.3
2.7
80
43.3
5.1
2.5
39.7
4.9
2.4
36.2
4.7
2.3
60
36.5
4.0
2.7
36.7
3.9
2.8
36.9
3.8
2.9
70
35.1
4.4
2.3
34.6
4.3
2.4
34.1
4.2
2.4
80
33.8
4.8
2.1
32.5
4.7
2.0
31.2
4.6
2.0
60
31.6
3.9
2.4
32.7
3.8
2.5
33.9
3.8
2.6
70
30.4
4.3
2.1
31.3
4.2
2.2
32.2
4.2
2.3
80
29.3
4.7
1.8
29.9
4.7
1.9
30.5
4.6
2.0
60
47
40
30
17
10
1600
1800
2000
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
Air Handler
MA20D
MV20D
MV20D
AHP/SHP60
AV/SV60
F*FV060
–
Coil
MC61D
FC/MC60D
MC61D
–
–
–
MC61
Unitary Products Group
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
1.00
0.99
0.99
1.00
0.98
0.99
1.00
KW
1.00
1.00
1.00
1.00
1.01
1.00
1.00
Page 19
Variable Speed
Furnace
PV8*C20
PV8*C20
PV8*C20
P(C,V)9*C20
P(C,V)9*D20
P(C,V)9*D20
Coil
T.C.
S.C.
KW
FC/PC60C
HC60
HD60
FC/PC60C
FC/MC/PC60D
MC61D
1.00
1.00
1.00
0.98
0.98
0.98
0.99
0.99
0.99
0.96
0.96
0.96
1.00
1.00
1.00
1.00
1.01
1.01
23
http://www.rezine.net
Page 20
Page 21
25'
1
0
0
0
0
1
0
0
1
0
0
0
0
0
0
0
0
1
0
0
1/2
5/8
5/8
3/4
7/8
5/8
3/4
7/8
5/8
3/4
7/8
3/4
7/8
1--1/8
3/4
7/8
1--1/8
3/4
7/8
1--1/8
2
0
1
0
0
2
0
0
2
0
0
1
0
0
1
0
0
2
1
0
50'
3
1
1
0
0
3
1
0
4
1
0
2
1
0
2
1
0
4
2
0
80'
4
1
2
0
0
3
1
0
5
1
0
2
1
0
3
1
0
5
2
1
100'
6
1
3
1
0
4
1
1
6
2
1
3
1
0
4
2
0
6
3
1
125'
7
2
3
1
0
5
2
1
7
2
1
4
2
0
5
2
0
7
4
1
150'
8
2
4
1
0
6
2
1
9
3
1
4
2
0
5
2
0
9
4
1
175'
Equivalent length. Requires Accessories
9
3
4
1
0
7
2
1
10
3
1
5
2
0
6
3
1
10
5
1
200'
Cooling Capacity Loss (%) Total Equivalent Line Length (ft)
Required Accessories are Solenoide valve, crankase heater, star capacitor, hard shut off TXV, filter drier.
5 Tons
4 Tons
3.5 Tons
3 tons
2.5 Tons
2 Tons
1.5 Ton
Unit Nominal Size
Liquid Line is
3/8"
Vapor
Line Diameters
(In. O.D.)
R-410a Refrigerant lines and the losses
10
3
5
1
0
8
3
1
11
4
2
6
3
0
7
3
1
11
5
1
225'
12
3
6
2
1
9
3
1
13
4
2
6
3
1
8
4
1
12
6
2
250'
http://www.rezine.net
Page 22
25'
1
0
0
0
0
1
0
0
1
0
0
0
0
0
0
0
0
1
0
0
1/2
5/8
5/8
3/4
7/8
5/8
3/4
7/8
5/8
3/4
7/8
3/4
7/8
1--1/8
3/4
7/8
1--1/8
3/4
7/8
1--1/8
2
0
1
0
0
2
0
0
2
0
0
1
0
0
1
0
0
2
1
0
50'
3
1
1
0
0
3
1
0
4
1
0
2
1
0
2
1
0
4
2
0
80'
4
1
2
0
0
3
1
0
5
1
0
2
1
0
3
1
0
5
2
1
100'
6
1
3
1
0
4
1
1
6
2
1
3
1
0
4
2
0
6
3
1
125'
7
2
3
1
0
5
2
1
7
2
1
4
2
0
5
2
0
7
4
1
150'
8
2
4
1
0
6
2
1
9
3
1
4
2
0
5
2
0
9
4
1
175'
Equivalent length. Requires Accessories
9
3
4
1
0
7
2
1
10
3
1
5
2
0
6
3
1
10
5
1
200'
Cooling Capacity Loss (%) Total Equivalent Line Length (ft)
Required Accessories are Solenoide valve, crankase heater, star capacitor, hard shut off TXV, filter drier.
5 Tons
4 Tons
3.5 Tons
3 tons
2.5 Tons
2 Tons
1.5 Ton
Unit Nominal Size
Liquid Line is
3/8"
Vapor
Line Diameters
(In. O.D.)
R-410a Refrigerant lines and the losses
10
3
5
1
0
8
3
1
11
4
2
6
3
0
7
3
1
11
5
1
225'
12
3
6
2
1
9
3
1
13
4
2
6
3
1
8
4
1
12
6
2
250'
http://www.rezine.net
http://www.rezine.net
Page 23
http://www.rezine.net
Page 24
http://www.rezine.net
Controls
HVAC control just became a
whole lot smarter and easier!
Only York offers the easiest
solution to help you
take control of controls.
®
C
O
N
T
R
O
L
COMFORT
ONLINE ALARMING
NO HASSLE SET-UP
TOTAL HVAC
CONTROL SOLUTIONS
More control for more savings
More compatibility for more flexibility
Cut energy costs, and achieve higher levels of comfort—
automatically with Simplicity® Intelli-Comfort™ controls.
The controls are compatible with the MODBUS protocol,
and are factory-installed on 3- to 25-ton Sunline™ and
Predator® products and Millennium® HA/HB Systems.
More intelligence for more capabilities
Intelli-Comfort controls use intelligent hardware and
software to give you better monitoring, more flexibility in
control set-up, and finer control of every aspect of your
HVAC system. In addition, the more intelligent the control,
the greater savings you will realize through operational
efficiencies and conservation.
More power with less effort
Intelli-Comfort is a control that’s so easy to use that
you actually benefit from the power at your fingertips.
Easier to manage
Intelli-Comfort raises the intelligence of an already
smart Simplicity control.
More control for greater comfort
The flexibility of the Simplicity Intelli-Comfort control
means comfortable, happier, and more productive
occupants—thanks to the ability to optimize temperature,
humidity, and indoor air quality simultaneously.
Put the intelligence of Simplicity Intelli-Comfort controls
to work in your building.
Simplicity Intelli-Comfort controls give you powerful capabilities without complexity. Easy to set-up, program, and use, the controls give you
everything you need to monitor and control Sunline and Predator units. And because they can be connected as your HVAC Energy
Management System you can save even more by making the intelligence of Simplicity Intelli-Comfort part of your building automation strategy.
RELIABILITY
OPEN PROTOCOL
LOW COST
New features for superior
monitoring and control
365-Day Real Time Clock with
automatic Daylight Savings Time adjustment
Occupancy Schedule allowing two different occupied
schedules per day for each of the seven days of the week
20 Holiday Schedules with a length of up to 99 days, each
with flexible start times. You can now choose the time of day
your holiday begins saving energy
Patent Pending Temperature Humidity Algorithm offsets
the operating setpoint based on high humidity in the space—with
programmable limits to control humidity
Energy-Saving Economizer Operation with the flexibility
of using dry bulb, outside enthalpy and differential enthalpy.
Our economizer enthalpy control has setpoints for outside air
temperature, supply air temperature, small space cooling demand,
and large space cooling demand
High and Low Ambient Lockout to lockout cooling below or
heating above a programmable setpoint of outside air temperature
Outside Air CO2 Sensor to close the economizer if CO2 is present
Inside Demand Ventilation using one CO2 sensor or differential
demand ventilation using inside and outside CO2 sensors
IAQ Operation with programmable maximum outside air
damper position
Space Temperature Alarm when temperatures are outside
of program setpoints. Alarm setpoints are user programmable
Unit Monitors Airflow to detect dirty filters and insufficient airflow
Intelligent Recovery brings the space temperature to the
occupied setpoint just before or at the beginning of the first
occupied schedule each day. The control will “learn” and apply
the minimum runtime required to heat or cool the space to
minimize energy use
Comfort Ventilation Control tempers the ventilation air
when heating or cooling is not required, increasing comfort
©2004 York International Corporation.
All rights reserved. Subject to change without notice.
Form 036-12054-001 (0105). Supersedes: Nothing. Printed in USA.
Page 25
http://www.rezine.net
Page 26
http://www.rezine.net
COMMERCIAL ZONING PACKAGE
The Facility Explorer Commercial Zoning Package is a complete, turnkey control system used to improve
occupant comfort in a building (or section of a building) that is conditioned with a packaged rooftop HVAC unit.
It accomplishes this by varying the amount of conditioned air delivered to individual zones and by intelligently
cycling the rooftop unit’s heating and cooling stages to best satisfy all the zone demands.
Manufacturer Independent
The Facility Explorer Commercial Zoning
Package is designed to work with any
standard, packaged HVAC equipment, regardless
of manufacturer. This allows you to apply this control
package to equipment provided by a variety of
suppliers or to equipment that has already been
installed. This flexibility makes the Facility Explorer
Commercial Zoning Package perfectly suited for both
new and retrofit installations.
Affordable Intelligence
The Facility Explorer Commercial Zoning Package
utilizes the distributed application architecture of
the FX16 Master Controller. This feature allows direct
communications to occur between the FX16 and all
the zone controllers. This means that there is no
need for a traditional supervisory class controller to
manage the data sharing. This direct communication
flow allows the FX16 to monitor each zone’s status to
intelligently determine the proper mode of operation
for the rooftop unit.
Page 27
http://www.rezine.net
COMMERCIAL ZONING PACKAGE
Easy Installation
Several pieces of the Facility Explorer Commercial
Zoning Package can be ordered pre-assembled from
the factory to simplify installation:
• Bypass Damper and Actuator Assembly
• Zone Controller and Actuator Assembly (FXZAN)
• FX16 Master Controller with Pre-Downloaded
Zoning Application
• The FX05 Field Controller is combined with an
M9104AGA non-spring return actuator and an
electrical termination wiring block, all in one
packaged assembly
• Perfect for retrofit installations where the zone
damper is already installed
• Zone Controller, Actuator, and Damper Assembly
• FXZAN Zone Controller and Actuator Assembly is
combined with a round or rectangular zone damper
• Perfect for new installations or for retrofit
installations where the zone damper has not yet
been installed
© 2005 Johnson Controls, Inc.
• A round or rectangular bypass damper is combined
with an M910xHGA non-spring return actuator
• FX16 Master Controller can be ordered with the
commercial zoning application pre-downloaded
• Once installed, the FX16 takes care of downloading
the corresponding parts of the zoning application to
each of the zone controllers
• Eliminates the downloading steps from the field
installation and startup
• This provides the possibility (with an onsite Medium
User Interface) to download, configure and
commission the entire system, including the
rooftop, bypass, and all zone controllers without
any software tool
Page
28 WI 53201
P.O. Box 423,
Milwaukee,
Printed in USA PUBL-3894
http://www.rezine.net
Page 29
http://www.rezine.net
TSS – Single Duct Variable Air Volume Terminal
• An integrated VAV box with direct digital controls
TSS Terminals provide Variable Air Volume (VAV) control
eliminates the coordination and difficulties
beyond the typical single duct box. They are specifically
associated with factory mounting
designed for precise air delivery throughout the entire
operating range, regardless of the installed inlet conditions.
• Downloading of software, setting of parameters,
These units can be ordered with or without a Direct Digital
addressing and testing at the factory reduces
Controller (DDC), which can operate as a stand-alone unit,
startup time and lowers risk
on a Johnson Controls N2 trunk, or on a LON® trunk.
• Superior flow measuring provides for lower
TSS Terminals take advantage of typical benefits provided
minimum cubic feet per minute (CFM) values,
by single duct units, while performing at extremely low
which reduces energy costs and noise while
sound levels. This is critical in today’s buildings where
maintaining comforts in the zone
occupants are placing more emphasis on indoor acoustics.
The TSS Terminal is manufactured and assembled with a
• Installation time can be reduced with the low
multi-point, center-averaging airflow sensor, which
profile compact design and standard metal
provides a signal to the controller enabling it to quietly and
hanging straps
precisely measure airflow.
• Units wired in compliance with all applicable
Bundled with the TSS Terminal is a digital controller from
National Electrical Code (NEC) requirements and
the VAV Modular Assembly (VMA) Series or the LN Series.
tested in accordance with Air Conditioning and
Each model in the VMA1400 Series and the LN Series
Refrigeration Institute (ARI) standard 880
combines a controller, pressure sensor, and actuator
housed in one pre-assembled unit.
• Offers damper stall detection, starved box
detection, actuator motor duty cycle, VAV box
flow test, and other diagnostics on most
models (VMA Series)
Page 30
TSS – Single Duct Variable Air Volume Terminal
Standard Features
http://www.rezine.net
Optional Features
Construction
Construction
• ARI 880 certified and labeled
• 20-gauge galvanized steel construction
• 22-gauge galvanized steel casing and valve
• 3/4” or 1” fiberglass insulation
• G90 galvanized steel
• Scrim-reinforced, foil-faced insulation meeting American
Society for Testing and Materials (ASTM) C1136 for mold,
mildew, and humidity resistance
• 1/2”, 4lb/ft3 skin, dual density fiberglass insulation, glued
and clinch-pinned in place
• 1/2” Elastomeric closed-cell foam insulation
Hot Water Coils
• Double wall construction with 22-gauge liner
• ARI 410 certified and labeled
• Mounting brackets to accept all-thread hanging rods or
wire hangers
• 1-, 2-, 3-, 4-row coils
• Tested at a minimum of 350 psig under water
• Low temperature construction for use in thermal storage
applications, including a thermally isolated primary air
inlet and a composite damper shaft
• Mechanically expanded copper tubes leak tested
to 350 psig air pressure
• Male sweat type water connections
Hot Water Coils
• Low pressure steam coils
Primary Air Valve
• Embossed rigidity rings
• Multi-circuit coils for reduced water pressure drop
• Low-thermal conducting damper shaft with
position indicator
• Opposite hand water connections
• Bottom and top access plates for cleaning
• Mechanical stops for open and closed position
Electrical Components
• Multi-point center-averaging airflow sensor
• Full unit toggle disconnect and inline motor fusing
• Brass balancing tees
• Primary and secondary transformer fusing
• Plenum-rated sensor tubing
Electric Heat
Electrical Components
• Proportional solid state relay (SSR) heater control
• cETL listed for safety compliance
• Mercury contactors
• National Electrical Manufacturers Association (NEMA)
Type 1 wiring enclosure
• Door interlocking disconnect switches
• Disconnect (toggle or door interlocking)
Electric Heat
• ETL listed as an assembly for safety compliance
• Integral electric heat assembly
• Automatic reset primary and back-up secondary
thermal limits
• Pneumatic Electric (PE) switches
• Mercury and magnetic contactors
• Manual reset secondary limit
• 24 volt control transformer
• Single-point power connection
• Special watt densities
• Hinged electrical enclosure
• Finned tubular elements
• Fusing per NEC
Controls
• Airflow switch
• Factory-provided controls
• Ni-chrome elements
• Direct digital controls (DDC) for N2 or LON® networks
• Primary/Secondary power terminations
• Pneumatic controls
• Wiring diagram
© 2005 Johnson Controls, Inc.
Page 31
P.O. Box 423, Milwaukee, WI 53201
www.johnsoncontrols.com
Printed in USA PUBL-3888
http://www.rezine.net
TSL – Single Duct Low Height Variable Air Volume Terminal
• An integrated VAV box with direct digital controls
TSL Terminals provide variable air volume (VAV) control
eliminates the coordination and difficulties
beyond the typical single duct box. They are specifically
associated with factory mounting
designed for precise air delivery throughout the entire
operating range and are only 10” in height, making them
• Downloading of software, setting of parameters,
ideal for shallow or congested ceiling plenum applications.
addressing and testing at the factory reduces
These units can be ordered with or without a Direct Digital
startup time and lowers risk
Controller (DDC), which can operate as a stand-alone unit,
on a Johnson Controls N2 trunk, or on a LON® trunk.
• Superior flow measuring provides for lower
minimum cubic feet per minute (CFM) values,
TSL Terminals take advantage of typical benefits provided
which reduces energy costs and noise while
by single duct units, while performing at extremely low
maintaining comforts in the zone
sound levels. This is critical in today’s buildings where
occupants are placing more emphasis on indoor acoustics.
• Installation time can be reduced with the low
The TSS Terminal is manufactured and assembled with
profile compact design and standard metal
a multi-point, center-averaging airflow sensor, which
hanging straps
provides a signal to the controller enabling it to quietly and
precisely measure airflow.
• Units wired in compliance with all applicable
National Electrical Code (NEC) requirements and
Bundled with the TSL Terminal is a digital controller from
tested in accordance with Air Conditioning and
the VAV Modular Assembly (VMA) Series or the LN Series.
Refrigeration Institute (ARI) standard 880
Each model in the VMA1400 Series and the LN Series
combines a controller, pressure sensor, and actuator
housed in one pre-assembled unit.
Page 32
TSL – Single Duct Low Height Variable Air Volume Terminal
http://www.rezine.net
• Secondary high limit
Standard Features
• Airflow switch
Construction
• ARI 880 certified and labeled
• Single-point power connection
• 20-gauge, galvanized steel casing and valve
• Hinged electrical enclosure door
• G90 galvanized steel construction
• Fusing per NEC
• 1/2", 4 lb/ft3 skin, dual density fiberglass insulation glued
and clinch pinned
Optional Features
• Invertible unit facilitates control installation on the left- or
right-hand side
Construction
Hot Water Coils
• ARI 410 certified and labeled
• Scrim-reinforced, foil-faced insulation meeting American
Society for Testing and Materials (ASTM) C1136 for mold,
mildew, and humidity resistance
• 1-, 2-, 3-, 4-row coils
• 1/2” Elastomeric closed-cell foam insulation
• Left- or right-hand connections
• Double wall construction with a 22-gauge liner
• Tested at a minimum of 450 psig under water and rated
at 300 psig working pressure at 200°F
• Mounting brackets to accept all thread hanging rods or
wire hangers
• Aluminum fin construction with die-formed spacer collars
for uniform spacing
• Discharge sound attenuator (Model TSL-SA)
• Mechanically expanded copper tubes leak tested to 450
psig air pressure and rated at 300 psig working pressure
at 200°F
• Coil access plate for cleaning coil
Hot Water Coil
• Coil circuiting options for reduced water pressure drop
• Right- or left-hand water connections
• Male sweat type water connections
• Bottom and top access plates for cleaning
Primary Air Valve
• 18-gauge, G90 galvanized steel construction
• Steam coils
• Low thermal conductance damper shaft
Electrical Components
• Position indicator on external end of damper shaft
• Toggle disconnect switch
• Mechanical stops for open and closed position
• Primary and secondary transformer fusing
• Multi-point center-averaging airflow sensor
Electric Heat
• Brass balancing tees
• Proportional solid state relay (SSR) heater control
• Plenum-rated sensor tubing
• Mercury contactors (if equipped with a mercury contactor,
the unit cannot be inverted)
Electrical Components
• Door interlocking disconnect switches
• cETL listed for safety compliance with Underwriters
Laboratories Inc.® (UL) 1995
• Disconnect (toggle or door interlocking)
• National Electrical Manufacturers Association (NEMA)
Type 1 wiring enclosure
• Pneumatic Electric (PE) switches
Electric Heat
• Manual reset secondary limit
• Invertible unit facilitates control installation on the left- or
right-hand side (not applicable if equipped with a
mercury contactor)
Controls
• cETL listed as an assembly for safety compliance
• Direct Digital Controls (DDC), for N2 or LON® networks
• Automatic reset primary and back-up secondary
thermal limits
• Pneumatic controls
• Mercury and magnetic contactors
• Factory-provided controls
• Primary auto-reset high limit
© 2005 Johnson Controls, Inc.
Page 33
P.O. Box 423, Milwaukee, WI 53201
www.johnsoncontrols.com
Printed in USA PUBL-3882
http://www.rezine.net
Single Duct Variable Air Volume Terminal (Model TSS)
Unit
Size
6
8
10
12
14
16
22
CFM
200
400
600
800
1100
1500
3000
Bypass
CFM
300
600
900
1200
1800
2200
5400
Dimensions
Weight
18
20
25
30
38
42
72
WxHxL
10” x 10" x 11"
12” x 10” x 11"
14” x 12.5" x 13”
16” x 15" x 13”
20” x 17.5" x 17.5"
24” x 17.5" x 17.5"
34” x 17.5" x 11"
A
6 1/2“
6 1/2“
6 1/2“
6 1/2“
6 1/2“
6 1/2“
8”
I
5 7/8”
7 7/8”
9 7/8”
11 7/8”
13 7/8”
15 7/8”
32 1/4” x 15 7/8”
X
8 3/4”
10 3/4”
12 3/4”
14 3/4”
18 3/4”
22 3/4”
32 3/4”
Y
8 3/4”
8 3/4”
11 1/4”
13 3/4”
16 1/4”
16 1/4”
16 1/4”
Note: All dimensions are in inches with a tolerance of +1/8”. Size 22 has a rectangular inlet collar. CFM based on
1000 FPM (Bypass 1500 FPM) for low to medium pressure applications.
Clearance 24"
Page 34
http://www.rezine.net
Single Duct Variable Air Volume Terminal - Rectangular (Model TSL)
Dimensions
Unit
Bypass
Size
CFM
CFM
A
W
L
X
Weight
10
600
1200
10”
15”
12 1/2”
13 3/4”
26
12
800
1600
14”
19”
12 1/2”
17 3/4”
28
14
1200
2200
20”
25”
16 1/2”
23 3/4”
39
16
1500
3000
26”
31”
16 1/2”
29 3/4”
45
Notes: 1. For dimensional data for unit sizes 6 and 8, refer to the Single Duct Variable
Air Volume Terminal (Model TSS). All dimensions are in inches with a tolerance of +1/8”.
Weights are in pounds. Weights are for the basic unit with the indicated option and
control enclosure. Actual weight varies based on project-specific requirements for unit
options, appurtenances, and controls. 2. Control enclosure is standard with factorymounted electronic controls. 3. Check all national and local codes for required
clearances.
Page 35
http://www.rezine.net
Page 36
http://www.rezine.net
®
UVC for HVAC
TM
Single-Ended, Very High
Output Germicidal Light
Source for HVAC Systems
Model SE Series
UVC Emitters™
needed to maintain microbial control. The UVC Emitter, by
contrast, has a 12-month service life – and even after a full
year, it has 2-1/2 times greater output than competitive devices
deliver on Day 1! As a result, only Steril-Aire can ensure the
germicidal performance you need, with no return of microbial
growth, for 3-4 times longer than the competition.
Applications
Steril-Aire Single-Ended (SE Series) fixtures install from the
exterior of HVAC equipment, making them ideal for
germicidal sites that are difficult to access. They are easily
installed by making a one-inch hole in the equipment wall
and/or duct, and then simply mounting the fixture to the unit
exterior. Only the lamp or tube penetrates into the system,
while the power supply remains external. Choose from six
tube lengths (16", 20", 24", 30", 36" and 42") and four voltage
options (115, 208, 230 or 277 Vac) to fit most applications,
including:
• Fan coils, heat pumps, unit ventilators, terminal units and
ductwork.
UVC Output vs. Temperature
Steril-Aire
Benefits
• Kills or inactivates surface and airborne microorganisms that
contribute to poor IAQ and/or the spread of infectious disease,
including: mold and mold spores, bacteria (including TB,
Legionella, E. coli, Listeria, salmonella and whooping cough);
and viruses (including colds, flu, measles).
• Delivers an average of 5 times the output of competitive UVC
products at HVAC operating temperatures, for 3-4 times
longer life and more reliable germicidal control.
• Uses patented state-of-the-art solid-state electronic power
supply for enhanced reliability and performance.
• Continuously cleans coils, drain pans, plenums and ducts,
eliminating costly cleaning programs and the use of harmful
chemicals and disinfectants.
Steril-Aire’s multi-patented UVC Emitter™ provides the best
and longest-lasting UVC performance available. As shown in
the comparison graph (above), it has been independently
tested to deliver an average of 5 times the output of other
ultraviolet devices under HVAC operating conditions (45o F @
550 fpm air velocity).
Competitive UVC lights must be changed every 3-4
Page
months because they quickly lose the output or "killing power"
• Lowers HVAC energy costs by restoring heat transfer and net
cooling capacity.
• Produces no ozone or other secondary contaminants – will not
harm building occupants, equipment or furnishings.
• Offers lowest life-cycle cost of any UVC product. Return on
investment is often less than one year.
• Installs quickly and easily, with no need to open equipment –
37 ideal for small systems and/or ducts.
http://www.rezine.net
Model SE Specifications
The UVC EmitterTM and fixture shall be factory assembled and
tested. They shall consist of a housing, power source, Emitter socket
and Emitter.
The housing shall be constructed of 304 stainless steel to withstand
HVAC environments and shall be equipped with a 1/2" electrical
conduit opening to facilitate wiring. All components shall be
The power supply shall be a Class P2, electronic rapid start type
with a power factor of >0.95 and a power conversion of >75%. It
shall be available in 115-208/230 or 277 Vac, 50/60 Hertz, and single
phase. It shall be designed to maximize photon production, irradiance
and reliability in cold or moving airstreams of 35-170° F, 100% RH
and up to 2000 fpm. The design shall include RF and EMI
suppression.
1" DIA HOLE REQD TO INSTALL
2"
incorporated into one integral assembly that maximizes serviceability.
It shall be designed for mounting from outside the airstream with
only the Emitter in the conditioned air. Emitter shall be held in place
and supported in the airstream by a patented integral collar, o-ring
and heavy-duty spring wire fastener. The housing shall include an onoff switch and an indicator light to verify unit function.
4-1/4"
16" THRU 42" ORDERED SEPARATELY
The soc ket shall be a Circline® 4 pin type with sufficient wire length
to facilitate service.
LIGHTED ON / OFF SWITCH
WIRE OR CONDUIT INLET
The Emitter shall be a very high output, hot cathode, T5 diameter,
Circline® cell-base type that produces a UVC band of 250-260 nm.
Each tube shall be capable of producing the specified output at up to
2000 fpm velocity and temperatures of 35-170° F. It shall produce no
ozone or other secondary contaminants.
BOTTOM VIEW
9"
FIXTURE MAY BE INSTALLED
IN ANY ORIENTATION
This product may be covered by one or more of the following patents, others
pending: 5,334,347/ 5,866,076/ 5,817,276/ 6,372,186/ 6,313,470/ 6,245,293/
6,267,924/ 6,280,686/ 6,423,882.
Inde pendent testing: The unit shall be tested by an independent test
laboratory in accordance with the general provisions of IES Lighting
Handbook, 1981 Applications Volume, and shall be verified through
independent testing to provide output per 1" arc length of not less
than 10 μW/cm2 at 1 meter in a 400 fpm airstream of 45° F.
Unit shall comply with UL Standard 1995 for use in HVAC
equipment and shall carry the "UL" and "ULC" labels.
Ordering Information
Model No.
Part No.
Description
SE 1 VO
SE 1 VO
GTS 16 VO
GTS 20 VO
GTS 24 VO
GTS 30 VO
GTS 36 VO
GTS 42 VO
11001900
11002100
21000100
21000200
21000300
21000400
21000500
21000600
Single-Ended Fixture
Single-Ended Fixture
UVC Emitter
UVC Emitter
UVC Emitter
UVC Emitter
UVC Emitter
UVC Emitter
Length
N/A
N/A
16"
20"
24"
30"
36"
42"
Electrical
Weight
115, 208, 230V: 70-85 watts
277V: 70-85 watts
N/A
N/A
N/A
N/A
N/A
N/A
3.0 lb.
3.0 lb.
0.15 lb.
0.15 lb.
0.20 lb.
0.20 lb.
0.25 lb.
0.25 lb.
Complies with current U.S. and Canadian UL Standards for
use in HVAC equipment.
®
Represented By:
Steril-Aire, Inc.
Corporate Office:
2840 N. Lima St.
Burbank, CA 91504
Telephone: 800-2STERIL or 818-565-1128
Fax: 818-565-1129
Website: www.steril-aire.com
Email: sales@steril-aire.com
© 2003 Steril-Aire
1101-07/05
Page 38