Samsung SSD 840 EVO 2.5" SATA 120 GB (Básico) User Manual
Add to my manuals
9 Pages
Samsung MZ-7TE120 is a high-performance solid state drive (SSD) designed for use in personal computers, laptops, and workstations. With its SATA III interface and 6Gb/s data transfer rate, the MZ-7TE120 delivers blazing-fast read and write speeds, making it ideal for demanding applications such as gaming, video editing, and data-intensive multitasking. The MZ-7TE120 is also equipped with Samsung's advanced 3D V-NAND technology, which provides increased storage capacity and reliability compared to traditional NAND flash memory.
advertisement
Samsung Magician v.4.4
Introduction and Installation Guide
2014.05 (Rev 1.3)
1
Legal Disclaimer
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE
PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only.
All information discussed herein is provided on an “AS IS” basis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppels or otherwise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office.
Copyright © 2014
This material is copyrighted by Samsung Electronics. Any unauthorized reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited and is a violation under copyright law.
Trademarks & Service Marks
The Samsung Logo is the trademark of Samsung Electronics. Adobe is a trademark and Adobe Acrobat is a registered trademark of Adobe
Systems Incorporated. All other company and product names may be trademarks of the respective companies with which they are associated.
2014.05 (Rev 1.3)
2
Introduction
The Samsung Magician software is designed to help users easily manage the health and performance of their Samsung SSD. In addition to providing vital
SSD health status information, Magician will assist users in updating firmware, measuring performance, and optimizing the configuration of a
Windows operating system installation.
Samsung Magician software is developed and distributed exclusively for owners of Samsung Solid Sate Drives (SSDs).
New in Version 4.4
Magician 4.4 features a number of improvements over version 4.3:
- New model support : 850 PRO
- RAPID v1.1
- PCIe SATA Card, Marvell chipset support
- Remove the UAC(User Account Control) alarm
- Retain the OS Optimization mode when updating the Magician
- Improve the operation speed of Performance Optimization
2014.05 (Rev 1.3)
3
System Requirements
Component Requirement
Windows XP SP2 (32bit)
Operating System
Windows Vista (32/64bit)
Windows 7 (32/64bit)
Windows 8 & 8.1(32/64bit)
Disk Capacity minimum 95MB available for installation
Supported Partition Types MBR, GPT
Supported Languages
English, Korean, Spanish, Deutsch, Japanese,
Chinese(Simplified), French, Italian, Portuguese,
Russian
The following Samsung SSDs are supported*:
Samsung SSD 850 PRO
Samsung SSD 840 EVO (2.5”, mSATA)
SSD
Samsung SSD 840 PRO
Samsung SSD 840 Series
Samsung SSD 830 Series
Samsung SSD 470 Series
*Some features may not be supported for all models.
RAPID mode Requirements
Component
Operating System
SSD
Processor
System memory(DRAM)
Free Disk Space
File System
Requirement
Windows 7 (32/64bit),
Windows 8 & 8.1 (32/64bit)
Samsung SSD 850 PRO, 840 PRO, 840 EVO, 840
EVO mSATA
1GHz or faster
2GB RAM or more
Minimum 50MB
NTFS
*This is the minimum system requirements of RAPID mode. For desirable performance,
4GB or higher system memory is recommended.
2014.05 (Rev 1.3)
4
Driver Support
Chipset
Intel
AMD
Driver
Microsoft
Intel
Microsoft
AMD
NVIDIA
Supported
Yes
Yes
Yes
Yes
Yes
Precautions
1) The SSD should not be removed or disconnected while SSD Optimization or Benchmarking are in progress. Doing so could result in data corruption.
2) All parallel operations should be terminated before executing the SSD
Optimization or Benchmarking features.
3) Data corruption may result if the user terminates the Magician application abnormally while SSD Optimization, Benchmarking, FW
Update, or Secure Erase features are in progress.
4) Using the Performance Optimization feature in Magician does not guarantee performance improvement. Performance Optimization can only improve performance issues related to capacity usage and fragmentation.
5) There is always the risk of data loss when updating SSD firmware. It is imperative that the user backs up any important data before performing a firmware update either via Magician or via the Magician DOS Utility.
6) The SSD may be permanently damaged if it is unplugged while the firmware update process is in progress via the DOS Utility.
General Limitations
1) Magician is designed specifically for Samsung-branded SSDs. SSD-specific features like Firmware Update, Disk Health Status, Secure Erase, and Total
Bytes Written are not supported for non-Samsung SSDs.
2) Magician does not work with SSDs connected via the SCSI controller interface.
3) Only MBR and GPT partition types are supported. Magician may not work with other partition types.
4) Magician will not work on SSDs that are locked with a user password.
5) The user may need to manually refresh the disk list in System Information for
2014.05 (Rev 1.3)
5
Magician to accurately reflect all connected/removed disks.
6) Benchmarking results are for a Queue Depth of 32.
7) It may be necessary to manually refresh the disk list in System Information before performing benchmarking or performance optimization on a newly attached disk.
8) The Performance Optimization feature relies on the ATA PASS THROUGH feature to pass the TRIM command to the SSD. This feature may be disabled by Windows XP/2003 if your SSD is less than 137GB in size. Microsoft provides a hot fix for this issue at http://support.microsoft.com/kb/934205.
9) Secure Erase is not supported for Windows 8 and 8.1 systems.
10) Performance Optimization supports only the NTFS file system.
11) Over Provisioning may fail, even though enough free space is available, if your system suffers from cluster misalignment.
12) Benchmarking may not work with some removable storage devices.
13) If User cannot span or shrink volume size through disk management of OS administration tool, it is possible not to work dynamic over-provisioning properly.
14) When the IRST driver is enabled / Installed in system. Then enabling of
Write cache buffer/flushing in SSD may fail (OS Optimization).
* Also, when a specific or latest IRST driver (IRST 12.6.0.1033,
12.8.10.1005) is installed, the authentication function may not work correctly. In this case, rollback to the older version.
15) RAID on mode in SATA configuration is not supported by Samsung magician and DOS application.
16) PC will be shut down automatically after firmware update (Magician counts down 20 seconds before shutdown)
17) Security mode(Class 0, TCG/Opal or Encrypted Drive) must be disabled(unlocked) before removing and installing onto another PC.
18) Firmware Update may fail on Samsung brand SSDs connected to AMD
Controller. Please retry using default SATA AHCI controller(Microsoft drivers)
19) Performance Benchmark may get timed-out on As media controllers if the driver does not handle multi thread operations (IOs)”
20) Always use the latest storage drivers. If user is using any custom storage driver, then Magician may not function properly
21) Magician will only retain the power option that was tuned before installing
Magician. If user changes the power option after installation, Magician cannot retain that.
DOS Utility Limitations
1) The DOS Utility is not compatible with pure SCSI or SATA
NVIDIA/LSI/AMD chipset drivers.
2) AHCI or ATA mode must be enabled in the BIOS during PC boot up.
3) The DOS utility may not work consistently on PCs with chipsets other than the ones listed above.
4) The DOS Utility may hang if the SSD is removed on PCs that do not support the hot plug feature (e.g. ICH5/6 chipsets).
5) The DOS Utility will not work with devices attached via SATA 6Gbps
(SATA III) operating in IDE mode.
2014.05 (Rev 1.3)
6
RAPID mode Limitations
1) RAPID mode accelerates only one SSD even though user has several
Samsung SSDs(840 PRO, 840 EVO, and 840 EVO mSATA).
2) If there are two identical SSDs connected, RAPID mode may accelerate the incorrect SSD.
3) RAPID mode sets is not supported as an accelerated drive.
4) After uninstalling RAPID mode, if the system is restored to a prior state in which
RAPID mode was installed, RAPID mode will be started in a disabled state.
5) NVIDIA Storage controller is not supported.
6) During RAPID mode Enable/Disable operation: Do not disconnect the target
SSD, Do not kill the application.
7) F/W download and Secure Erase is not allowed in case of RAPID mode enabled SSD.
8) If fast startup is enabled on windows 8 and 8.1 machines, RAPID mode enable/disable requires system restart. Shutdown followed by turning-on the power will not activate RAPID mode enable/disable. By default fast startup is enabled.
9) Flush command of operating system and/or application may cause variation in performance when RAPID mode is enabled(especially when
Write-Cache Buffer Flushing is On).
10) Sometimes on AMD PC with AMD and AS Media storage controllers it was found that the IOs takes a longer time to complete. In such cases if
RAPID was enabled, it may get automatically disabled due to such IO errors. It may display "RAPID is in inactive state". User has to reboot the PC to enable the RAPID back.
2014.05 (Rev 1.3)
7
Operational Check of RAPID mode
RAPID mode starts its operation 45 seconds after OS booting. Please make sure the increased size of non-paged pool using “task manager → performance → memory tab” to ensure it is fully operational.
* Before RAPID mode enabling
* After RAPID mode enabling
2014.05 (Rev 1.3)
8
www.samsung .com/ssd , w
2014.05 (Rev 1.3) ww.samsung.com/samsungssd
All brand and product names are trademarks of their respective companies. Design
9
and contents of this manual are subject to change without notice.
©2014 Samsung Electronics, Co., Ltd. All rights reserved.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement