Metronic DTR-02 Instruction manual

DTR-30.6
Advanced Manual
Contents
AM/FM Radio Receiving Function
Tuning into a Radio Station
Registering an AM/FM Radio Station
Using RDS (Australian model)
Playing Content from a USB Storage Device
2
2
2
3
4
Listening to Internet Radio
5
About Internet Radio
5
TuneIn5
Pandora®–Getting Started (U.S., Australia and
New Zealand only)
6
SiriusXM Internet Radio (North American only)
7
Slacker Personal Radio (North American only)
8
Registering Other Internet Radios
9
DLNA Music Streaming
11
About DLNA
11
Configuring the Windows Media Player
11
DLNA Playback
11
Controlling Remote Playback from a PC
12
Music Streaming from a Shared Folder
12
About Shared Folder
12
Setting PC
13
Playing from a Shared Folder
13
Using Remote Controller for Playing Music Files
14
About the Remote Controller
14
Remote Controller Buttons
14
Icons Displayed during Playback
14
Using the Listening Modes
15
Selecting Listening Mode
15
Contents of Listening Modes
16
Checking the Input Format
18
Advanced Settings
19
How to Set
19
1.Input/Output Assign
20
2.Speaker Setup
23
3.Audio Adjust
25
4.Source Setup
27
5.Listening Mode Preset
30
6.Miscellaneous31
7.Hardware Setup
37
8.Remote Controller Setup
42
9.Lock Setup
42
Operating Other Components Using Remote
Controller43
Functions of Remote Mode Buttons
43
Programming Remote Control Codes
43
TV Operation
44
Blu-ray Disc Player/DVD Player/DVD Recorder
Operation45
VCR/PVR Operation
45
Satellite Receiver/Cable Receiver Operation
46
CD Player Operation
46
Cassette Tape Deck Operation
47
To Operate CEC-compatible Components
47
Advanced Speaker Connection
48
Bi-Amping48
Connecting a Power Amplifier
48
Connecting and Operating Onkyo RI Components 49
About RI Function
49
RI Connection and Setting
49
iPod/iPhone Operation
50
Control Function between the Unit and External
Component51
Firmware Update
52
About Firmware Update
52
Updating the Firmware via Network
52
Updating the Firmware via USB
53
Troubleshooting55
Reference Information
62
En
AM/FM Radio Receiving Function
„„
Tuning into stations manually
AM/FM Radio Receiving Function
Tuning into a Radio Station
„„
Tuning into stations automatically
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
2. Press Tuning Mode so that the "AUTO" indicator on the
display goes off.
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
3. Press Tuning
2. Press Tuning Mode so that the "AUTO" indicator on the
display stays lit.
to select the desired radio station.
• The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
3. Press Tuning
to start automatic tuning.
• Searching automatically stops when a station is found.
When tuned into a radio station, the " TUNED "
indicator on the display lights. When tuned into an FM
radio station, the "FM STEREO" indicator lights.
• No sound is output while the " TUNED " indicator
is off.
To return the display to "AUTO": Press Tuning Mode on
the main unit again. The unit is automatically tuned into an
FM radio station. Normally "AUTO" should be displayed.
radio station within 8 seconds.
• To enter 87.5 (FM), for example, press 8, 7, 5, or 8,
7, 5, 0. If you entered a wrong number, you can enter
a correct one after 8 seconds.
It allows you to register up to 40 of your favorite AM/FM
radio stations. Registering radio stations in advance allows
you to tune into your radio station of choice directly.
„„
Registering a Station
It allows you to directly enter the frequency of the radio
station you want to listen to.
2
3. Using the number buttons, enter the frequency of the
Registering an AM/FM Radio Station
„„
Tuning into stations by frequency
When the signal from an FM radio station is weak:
Radio wave may be weak depending on the building
structure and environmental conditions. In that case,
manually tune into the radio station of your choice by
referring to the next section.
2. Press D.TUN.
1. Press Tuner on the remote controller several times to
select either "AM" or "FM".
1. Tune into the AM/FM radio station you want to register.
2. Press Memory on the main unit so that the preset
number on the display flashes.
AM/FM Radio Receiving Function
3. Press Preset
several times to select a number
between 1 and 40 while the preset number is flashing
(about 8 seconds).
2. Press and hold Memory on the main unit and press
Tuning Mode to delete the preset number.
• When deleted, the number on the display goes off.
Using RDS (Australian model)
4. Press Memory again to register the station.
• When the station is registered, the preset number
stops flashing.
• Repeat this procedure for all of your favorite AM/FM
radio stations.
„„
Selecting a Preset Radio Station
1. Press CH +/- on the remote controller to select a preset
number.
• Alternatively you can press Preset
on the
main unit. You can also select by directly entering
the preset number with the number buttons on the
remote controller.
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals.
• RDS works only in areas where RDS broadcasts are
available.
• In some cases, the text information appeared on the
display is not identical to the content transmitted by
the RDS station. Furthermore, unexpected characters
may be displayed when the unit receives unsupported
characters. However, this is not a malfunction.
• If the signal from an RDS station is weak, the RDS data
may be displayed continuously or not at all.
PS (Program Service): Tuning into a radio station
distributing Program Service information displays the
radio station name. Pressing DISPLAY displays the
frequency for 3 seconds.
RT (Radio Text): Tuning into a radio station transmitting
Radio Text information displays text on the display of the
unit.
PTY (Program Type): Allows you to search for RDS
stations by program type.
„„
Deleting a Preset Radio Station
1. Press CH +/- on the remote controller to select the
preset number to delete.
TP (Traffic Program): Allows you to search for radio
stations transmitting traffic information.
„„
Displaying Radio Text (RT)
1. Press RT/PTY/TP on the main unit once.
• The Radio Text (RT) is displayed scrolling across
the display. "No Text Data" is displayed when no text
information is available.
„„
Searching by Type (PTY)
1. Press RT/PTY/TP on the main unit twice.
• The current program type appears on the display.
2. Press Preset
to select the type of program to
search for.
• The following RDS station types are displayed:
None
News (News reports)
Affairs (Current affairs)
Info (Information)
Sport
Educate (Education)
Drama
Culture
Science (Science and technology)
Varied
Pop M (Pop music)
Rock M (Rock music)
Easy M (Middle of the road music)
Light M (Light classics)
Classics (Serious classics)
Other M (Other music)
Weather
Finance
Children (Children’s programmes)
Social (Social affairs)
Religion
Phone In
Travel
Leisure
Jazz (Jazz music)
Country (Country music)
Nation M (National music)
3
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device
Oldies (Oldies music)
Folk M (Folk music)
Document (Documentary)
3. Press Enter to search the radio stations of the selected
type.
4. When such a radio station is found, the indication on the
display flashes. Then, press Enter again.
• If no stations are found, the message "Not Found" is
displayed.
2. Plug your USB storage device with the music files into
Playing Content from a USB
Storage Device
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
1. Press RT/PTY/TP on the main unit three times.
• "[TP]" will be displayed if traffic information is
transmitted by the radio station you are tuned in.
"TP" only is displayed if no traffic information is
available.
2. Press Enter to search a radio station distributing traffic
information.
„„
Playing Back
1. Press USB on the remote controller to select "USB".
display flashes. Then, press Enter again.
• "Not Found" is displayed if no radio station
distributing traffic information is found.
4
3. Press Enter.
• The list of folders and music files on the USB storage
device is displayed. Select the folder with the cursors
and press Enter to confirm your selection.
4. With the cursors, select the music file to play, and then
press Enter or
to start playback.
„„
Listening to Traffic Information (TP)
3. When such a radio station is found, the indication on the
the USB port of the unit so that "USB" lights on the
display.
• If the "USB" indicator flashes, check whether the
USB storage device is plugged in properly.
• Do not unplug the USB storage device while
"Connecting..." is appeared on the display. This may
cause data corruption or malfunction.
Listening to Internet Radio
Listening to Internet Radio
About Internet Radio
Internet radio, also called net radio, web radio or streaming
radio, is an audio service accessible at the websites of
service providers who distribute music and audio programs
in digital format. There are numerous websites all over the
world, from terrestrial station, special station to personal
website that provide such a service.
The unit comes preset with Internet radio stations ()
such as TuneIn for you to enjoy these services, just by
connecting the unit to the Internet.
TuneIn
2. Select "TuneIn" with the cursors and press Enter to
With more than 70,000 radio stations and 2 million ondemand programs registered, TuneIn is a service where
you can enjoy music, sports and news from all over the
world.
3. With the cursors, select a radio station or program and
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
display the TuneIn top screen.
press Enter to start playing.
„„
Regarding the TuneIn Menu
To display the TuneIn menu, press Menu while playing a radio
station, or select "Go to Menu" and press Enter. Selecting
the corresponding menu item with the cursors and pressing
Enter allows you to perform the following operations:
Add to My Presets: Registers radio stations and
programs in your "My Presets" within TuneIn. This allows
you to play registered radio stations and programs with
a simple operation. ("My Presets" is not displayed if it is
empty.)
Remove from My Presets: Deletes a radio station or
program from your "My Presets" within TuneIn.
¼¼
Network services or contents may become unavailable if the service
provider terminates its service.
Report a problem: Reports a problem or interactively
solves a problem related to TuneIn.
View Schedule: Displays the radio station or program
schedule.
Clear recents: Clears all radio stations and programs
from the "Recents" within TuneIn. (This menu is
displayed only when a radio station or program inside
the "Recents" is being played.)
„„
Playing Back
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit.
• Alternatively you can select "Network Service" in the
Home menu.
Add to My Favorites: Registers radio stations and
programs in "My Favorites" of "Network Service".
This allows you to play registered radio stations and
programs with a simple operation.
„„
Regarding the TuneIn Account
Creating an account on the TuneIn website (tunein.com)
and logging in it from the unit allows you to automatically
add radio stations and programs to your "My Presets" on
the unit as you save them on the website .
To display a radio station registered in "My Presets", you
must log into TuneIn from the unit. To log in, select "Login" "I have a TuneIn account" in the "TuneIn" top list on the unit,
and then enter your user name and password.
5
Listening to Internet Radio
• If you associate the device on My Page within the TuneIn
website using the registration code obtained by selecting
"Login" - "Login with a registration code" on the unit, you
can log in without entering the user name and password.
Pandora®–Getting Started (U.S., Australia and
New Zealand only)
„„
Playing Back
„„
Create a New Station
1. Press NET on the remote controller to display NET TOP
Enter the name of a track, artist, or genre and Pandora will
create a unique radio station for you based on the musical
qualities of that track, artist, or genre.
screen.
• The "NET" indicator on the display stays lit. To
display NET TOP screen, you can alternatively press
Home, select Network Service on the displayed
Home menu, and then press Enter.
I don’t like this track: Give a track "thumbs-down" and
Pandora will ban that track from the current station.
Pandora is a free, personalized Internet radio service that
plays the music you know and helps you discover music
you’ll love.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
I like this track: Give a track "thumbs-up" and Pandora
will play more music like it.
Why is this track playing?: Discover some of the
musical attributes that Pandora uses to create your
personal radio stations.
2. Select "Pandora" with the cursors, and then press Enter.
3. Use / to select "I have a Pandora Account" or "I’m new
to Pandora" and then press Enter.
If you are new to Pandora select "I’m new to Pandora".
You will see an activation code on your TV screen.
Please write down this code. Go to an Internet
connected computer and point your browser to www.
pandora.com/onkyo. Enter your activation code and then
follow the instructions to create your Pandora account
and your personalized Pandora stations. You can create
your stations by entering your favorite tracks and artists
when prompted. After you have created your account
and stations you can return to your Integra/Onkyo AV
receiver and press Enter to begin listening to your
personalized Pandora.
If you have an existing Pandora account, you can add
your Pandora account to your Integra/Onkyo receiver by
selecting "I have a Pandora Account" and logging in with
your email and password.
• If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
4. To play a station, use / to select the station from your
station list, and then press Enter. Playback starts and
the playback screen appears.
I’m tired of this track: If you are tired of a track, you
can put the track to sleep and Pandora will not play it for
one month.
Create station from this artist: Creates a radio station
from this artist.
Create station from this track: Creates a radio station
from this track.
Delete this station: This will permanently delete a
station from your Pandora account. All of your thumbs
feedback will be lost should you choose to re-create the
station with the same track or artist.
Rename this station: Lets you rename the current radio
station.
Bookmark this artist: Pandora will bookmark your
favorite artist for your profile on www.pandora.com.
Bookmark this track: Pandora will bookmark the
current track and allow you to buy them all from Amazon
or iTunes in one step!
Add to My Favorites: Adds a station to My Favorites
list.
PANDORA, the PANDORA logo, and the Pandora trade
dress are trademarks or registered trademarks of Pandora
Media, Inc. Used with permission.
6
Listening to Internet Radio
SiriusXM Internet Radio (North American only)
„„
Playing Back
If you want to listen to the service, you must subscribe. To
subscribe go to www.siriusxm.com/internetradio with your
computer. When you subscribe, you will be provided with
a username and password which has to be entered into
the AV receiver. To use SiriusXM Internet Radio, you must
have your AV receiver connected to the Internet. Using the
remote control, follow these steps:
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit. To
display the NET TOP screen, you can alternatively
press Home, select "Network Service" on the
displayed Home menu, and then press Enter.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
5. Use / to select the desired channel and then press
Enter.
• The playback screen for the selected channel
appears and you can listen to SiriusXM Internet
Radio. You can control the tracks with the buttons on
the remote control.
Enabled buttons:
, ,
,
Add to My Favorites: Adds a channel to My Favorites
list.
Add to Presets: Adds the currently playing station to
presets list.
Delete from Presets: Deletes the currently playing
station from presets list.
2. Select "SiriusXM Internet Radio" with the cursors, and
then press Enter.
3. Select "Sign In", and then press Enter. If you have an
existing SIRIUS account, you can sign in by selecting
"Sign In". Enter your user name and password in the
next keyboard screen, or in Web Setup. If you don’t
know your username or password, call Sirius XM at
(888) 539-7474 for assistance.
• If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
SiriusXM Internet Radio subscriptions are sold separately
and are governed by the Sirius Terms and Conditions (see
www.sirius.com). Be sure to read this agreement before you
purchase your subscription.
Sirius, XM and all related marks and logos are trademarks
of Sirius XM Radio Inc. and its subsidiaries. All rights
reserved.
Using the keyboard screen
1Use / / /
and Enter to enter your user name and
password.
2Select "OK".
3Press Enter. The "Confirm your entries" screen
appears.
4Press Enter. "Please wait..." appears and then
"SiriusXM Internet Radio" screen appears which
displays the category available for selection.
4. Use / to select the category and then press Enter.
• The channel list screen for the selected category
appears.
7
Listening to Internet Radio
Slacker Personal Radio (North American only)
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
„„
Playing Back
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit. To
display the NET TOP screen, you can alternatively
press Home, select "Network Service" on the
displayed Home menu, and then press Enter.
3. If you do not have an account, create one on the Slacker
website (www.slacker.com) with your computer. If you
already have a Slacker account, select "Sign in to your
account" and then press Enter. The keyboard screen
appears. You can enter information from the remote
control or the keys on the main unit.
4. If there are no mistakes in the information you have
entered, use / / / to select "OK" then press Enter.
An account information confirmation screen appears.
5. If you do not have an account, select "Access without
Sign In" and press Enter to use a restricted version of
the service. Note that use will be restricted.
• If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
6. Use / to select a menu item and then press Enter.
• To sign out, use / to select "Sign out" from this
screen and then press Enter.
7. Use / to select a station and then press Enter or
to start playback from the station. The playback screen
appears.
8. You can control the tracks with the buttons on the
remote control.
Enabled buttons:
, , ,
Rate Song as Favorite: Stores information to server,
making it more likely that the song will be played again.
Ban Song: Stores information to server, making it less
likely that the song will be played again.
Ban Artist: Stores information to server, making it less
likely that the songs from this artist will be played again.
Mark Favorite: Adds the currently playing station to your
favorites.
Unmark Favorite: Deletes the currently playing station
from your favorites.
Add song to Library: Adds the currently playing track to
your library.
2. Select "Slacker Personal Radio" with the cursors, and
then press Enter.
8
Delete song from Library: Deletes the currently playing
track from your library.
Add to My Favorites: Adds a station or song to My
Favorites list.
Using Multiple Accounts: The AV receiver supports
multiple user accounts, which means you can freely switch
between several logins. After registering user accounts,
login is performed from the "Users" screen.
Press Menu while the Users screen is displayed. "Add new
user", "Remove this user" menu appear. You can either
store a new user account, or delete an existing one.
• Some of the services don’t allow the use of multiple user
accounts.
• You can store up to 10 user accounts.
• To switch between accounts you must first log out from
the current account, and log in again on the "Users"
screen.
Listening to Internet Radio
Registering Other Internet Radios
„„
Registering a Station
„„
Registering a Station with PC
To listen to other Internet radio program, register the
program in the "My Favorites" list on the NET TOP screen
as described below. The unit supports Internet radio
stations stored in the following formats: PLS (URL ending in
.pls), M3U (URL ending in .m3u) and RSS (URL ending in
rss/rdf/xml).
• You can register up to 40 Internet radio stations.
• Depending on the data type and file format for playback,
you may not be able to play an Internet radio station
even when its format is PLS, M3U or Podcast (RSS).
• Available services may vary depending on your area of
residence.
Before starting the procedure: The name and URL of
the radio station that you want to add are required for
registration. Check them before starting the procedure.
Before starting the procedure: The name and URL of
the radio station that you want to add are required for
registration. Check them before starting the procedure.
1. Press NET on the remote controller to display NET TOP
1. Press RCV on the remote controller.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
screen.
• The "NET" indicator on the display stays lit.
2. Select "My Favorites" with the cursors and press Enter
to display the "My Favorites" list screen.
• Always press RCV first to change the remote
controller to Receiver mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2. Press Home to display the Home menu.
3. Select a blank area of "My Favorites" with the cursors,
and press Menu to display the menu screen.
3. Select "Setup" with the cursors and then press Enter.
4. With the cursors, select "7.Hardware Setup" - "Network"
4. Select "Create new station" with the cursors and press
Enter to display the keyboard screen.
5. Enter the name and URL of the radio station to add.
• Select "Shift" and press Enter to toggle between
upper and lower case. Select " " or " " and press
Enter to move the cursor to the selected direction.
Select "Back Space" and press Enter to delete the
character at the left of the cursor position.
-" IP Address" to display the IP address.
• Write down the IP address since you will need it
later.
5. Open the Internet browser on your PC or smartphone
and enter the IP address of the unit in the URL field.
When using Internet Explorer, you can alternatively
select "Open" in the "File" menu to enter the IP address.
• Information of the unit is displayed on the browser.
("WEB Setup")
6. Click "My Favorites" tab, then enter the name and URL
of the Internet radio station.
7. Click "Save" to register the entered Internet radio station
in "My Favorites".
9
Listening to Internet Radio
To rename the registered radio station: While the radio
station is being played or when it is selected from the "My
Favorites" list, press Menu to display the menu screen.
Select "Rename this station" with the cursors and press
Enter to display the keyboard screen. Rename the station
as desired.
• Radio stations can be renamed also from "WEB Setup".
3. Select the radio station with the cursors to delete and
press Menu to display the menu screen.
• You can also display the menu screen by pressing
Menu while the radio station is being played.
„„
Playing a Registered Radio Station
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit.
4. Select "Delete from My Favorites" with the cursors and
then press Enter.
• Radio stations can be deleted also from "WEB
Setup".
2. Select "My Favorites" with the cursors and press Enter
to display the registered Internet radio stations.
3. Select a radio station with the cursors and press Enter to
start playing.
„„
Deleting a Registered Radio Station
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit.
2. Select "My Favorites" with the cursors and press Enter
to display the registered Internet radio stations.
10
DLNA Music Streaming
DLNA Music Streaming
• With Windows Media Player 12 Remote Playback
function, you can stream music files stored on your PC
to the unit by operating the PC.
Configuring the Windows Media Player
„„
Windows Media Player 11
About DLNA
Digital Living Network Alliance (DLNA) can be referred to
as a technology standard or the industry group to develop
the technology standard to interconnect and use AV
components, PCs and other devices in a home network
(more precisely the technology standard is called the DLNA
guidelines).
The unit allows you to use DLNA to play music files stored
on a PC or a hard disk connected to your home network
(NAS device). Make sure the unit and PC or NAS device
are connected to the same router.
1. Turn on your PC and start Windows Media Player 11.
2. In the "Library" menu, select "Media Sharing" to display
a dialog box.
3. Select the "Share my media" check box, and then click
"OK" to display the compatible devices.
4. Select this unit, and then click "Allow".
• When it is clicked, the corresponding icon is
checked.
5. Click "OK" to close the dialog.
„„
Windows Media Player 12
1. Turn on your PC and start Windows Media Player 12.
2. In the "Stream" menu, select "Turn on media streaming"
Internet radio
Router
PC
to display a dialog box.
• If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list
players in the network, and then go to step 4.
3. Click "Turn on media streaming" to list players in the
network.
4. Select this unit in "Media streaming options" and check
that it is set to "Allow".
5. Click "OK" to close the dialog.
„„
Playing Back
1. Start the server (Windows Media Player 11, Windows
Media Player 12, or NAS device) containing the music
files to play.
2. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit. If the
"NET" indicator flashes, the unit is not properly
connected to the network. When using a wired LAN
connection, check the Ethernet cable connection,
and when using a wireless LAN connection, check
whether the "Wi-Fi" indicator on the left side of the
unit stays ilt.
DLNA Playback
NAS
• To play a music file with DLNA, you need a NAS device
or the like with DLNA server functions and a DLNA
player (software) to stream the music. You can also
stream music files using a PC installed with Windows
Media Player 11 or 12 as they are equipped with both
DLNA server and player functions. To enable streaming,
you must first configure the Windows Media Player 11 or
Windows Media Player 12.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
3. Select "DLNA" with the cursors and press Enter.
4. Select the target server with the cursors and press Enter
to display the items list screen.
• Searching does not work in servers that do not
support search functions.
11
DLNA Music Streaming / Music Streaming from a Shared Folder
• The unit cannot access pictures and videos stored
on servers.
• Contents stored on the server may not be displayed
depending on the server sharing settings.
5. With the cursors, select the music file to play, and then
press Enter or
to start playback.
• If "No Item" is displayed, check whether the network
is properly connected.
4. Select this unit in "Media streaming options" and check
that it is set to "Allow".
5. Click "OK" to close the dialog box.
6. Open the "Stream" menu and check that "Allow remote
control of my Player..." is checked.
„„
Remote playback
1. Turn on the power of the unit.
2. Turn on your PC and start Windows Media Player 12.
3. Select and right-click the music file to play with Windows
Controlling Remote Playback from a PC
You can use this unit to play music files stored on your PC
by operating the PC inside your home network. The unit
supports remote playback with Windows Media Player 12.
To use the remote playback function with Windows Media
Player 12, Windows Media Player 12 must be configured in
advance.
• Using a DLNA-compatible controller (such as an
Android application), you can select a music file stored
on Windows Media Player 12 and stream to this unit
by operating the controller. For information on how to
remotely play using the controller, refer to the controller's
instruction manual.
„„
Setting PC
1. Turn on your PC and start Windows Media Player 12.
2. In the "Stream" menu, select "Turn on media streaming"
to display a dialog box.
• If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list
players in the network, and then go to step 4.
3. Click "Turn on media streaming" to list players in the
network.
12
Media Player 12.
• To remotely play a music file on another server, open
the target server from "Other Libraries" and select
the music file to play.
4. Select this unit in "Play to" to open the "Play to" window
of Windows Media Player 12 and start playback on the
unit.
• Operations during remote playback are possible from
the "Play to" window on the PC. The playback screen
is displayed on the TV connected to the HDMI output
of the unit. If your PC is running on Windows 8, click
"Play to", and then select this unit.
5. Adjust the volume using the volume bar on the "Play to"
window.
• Sometimes, the volume displayed on the remote
playback window may differ from that appeared on
the display of the unit.
• When the volume is adjusted from the unit, the value
is not reflected in the "Play to" window.
• This unit cannot play music files remotely in the
following conditions.
−− It is using a network service.
−− It is playing a music file on a USB storage device.
−− "Agree" was not selected in the DISCLAIMER
screen that was displayed when the NET input
was selected on the unit for the first time.
Music Streaming from a Shared
Folder
About Shared Folder
A shared folder is configured in a network device such as a
PC or NAS (hard disk connected to your home network) for
access from other users.
You can play music files in a shared folder on your PC or
NAS connected to the same home network as that of the
unit. To play music files in a shared folder, you must first
configure Windows 8 or Windows 7, Make sure the unit and
PC or NAS device are connected to the same router.
Internet radio
Router
PC
NAS
• The sharing options must be configured and a shared
folder created on the PC in advance.
• For information on how to configure the NAS device
and create a shared folder, refer to the NAS device's
instruction manual.
Music Streaming from a Shared Folder
Setting PC
Playing from a Shared Folder
2. Select "Home Media" with the cursors and then press
„„
Configuring the Sharing Options
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
3. Select the target server with the cursors and then press
1. Select "Choose Home group and Sharing Options" on
the "Control Panel".
• If the menu is not displayed, check whether "View
by" is set to "Category".
2. Select "Change advanced sharing settings".
3. Check whether the following radio buttons are selected
in "Home or Work":
"Enable network discovery"
"Turn on file and printer sharing"
"Turn on sharing so anyone with network access can
read and write files in the Public folders"
"Turn off password protected sharing"
4. Select "Save Changes" and click "OK" on the dialog box.
Enter.
Enter.
• You can check the server name of your PC from the
PC properties.
4. Select the target shared folder with the cursors and then
press Enter.
5. If a username and password is required, enter the
necessary login information.
• The login information is the account information set
at the time of creating the shared folder.
• Once entered, the login information will be
remembered from the next time onward.
6. With the cursors, select the music file to play, and then
press Enter or
to start playback.
„„
Creating a Shared Folder
1. Select and right-click the folder to share.
2. Select "Properties".
3. Select "Advanced Sharing" on the "Sharing" tab.
4. Select "Share this folder" check box and click "OK".
5. Select "Share" for "Network File and Folder Sharing".
6. Select "Everyone" from the pull-down menu. Click "Add",
and then "Share".
• To set user name and password to a shared folder,
set "Permissions" in "Advanced Sharing" on the
"Sharing" tab.
• Check whether a workgroup is set.
„„
Playing Back
1. Press NET on the remote controller to display NET TOP
screen.
• The "NET" indicator on the display stays lit. If the
"NET" indicator flashes, the unit is not properly
connected to the network. When using a wired LAN
connection, check the Ethernet cable connection,
and when using a wireless LAN connection, check
whether the "Wi-Fi" indicator on the left side of the
unit is lit.
13
Using Remote Controller for Playing Music Files
Using Remote Controller for
Playing Music Files
5
1
6
2
7
About the Remote Controller
The remote controller of this unit allows you to play music
files stored on USB storage devices, Internet radio, PCs
and NAS devices on your home network, as well as on
Bluetooth-enabled devices. It also allows you to view
information of the music file being played and perform
various other operations.
• Available buttons may vary depending on the service
and device to play.
• Some buttons cannot be used with Bluetooth-enabled
devices. Furthermore, the Bluetooth-enabled devices
must support the AVRCP profile. Some devices may not
be operated, even when they support AVRCP profile.
Remote Controller Buttons
1. Press Input Selector (PC, NET, USB or Bluetooth)
appropriate for the input source on the remote controller.
3
4
8
9
1Top Menu: This button displays the top menu for
each media or server.
2 / , Enter: These buttons navigate through items and
activate the selected item.
/ : These buttons allow you to navigate to another
page when the list is broken across several pages.
: This button fast-reverses the current track. This
3
button is not operable from 10 seconds before the
playback ends.
: This button plays the current track from the
4
beginning. Pressing this button twice plays the
previous track.
5CH +/- button: Moves the cursor on the Internet
radio stations list in "My Favorites".
6Menu: This button displays the menu of each Internet
radio service.
7Return: This button returns to the previous screen.
: This button fast-forwards the current track. This
8
button is not operable from 10 seconds before the
playback ends.
: This button plays the next track.
9
F
G
H
2. Operate the remote controller by referring to the name
and function of each of the buttons below.
G : This button pauses the playback.
HSearch: This button toggles between the playback
screen and list screen during playback.
I : This button stops the playback.
JRandom: This button performs random playback.
KRepeat: This button replays the track (or tracks).
Pressing this button repeatedly cycles through the
repeat modes.
LDisplay: This button changes the displayed track
information during playback. Pressing this button
when the list screen is displayed toggles the screen
to playback.
• Bluetooth-enabled devices: Usable buttons are
,
,
, ,
,
, and .
Icons Displayed during Playback
Icons are displayed on the display during music file
playback. The meaning of each icon is as follows:
: Folder
: Track
: Play
: Pause
: Fast-forward
: Fast-reverse
: Artist
: Album
I
J
K
: Repeat One Track
: Repeat within a folder
: Repeat
L
F
14
: This button starts the playback.
: Shuffle
Using the Listening Modes
„„
MOVIE/TV button
Using the Listening Modes
Selecting Listening Mode
The listening modes allow you to select the best sound
effect for your input source.
1. Press RCV on the remote controller.
• Always press RCV first to change the remote
controller to Receiver mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2. Press one of the following buttons depending on your
choice from among the four listening modes.
• Pressing a button changes the listening mode to that
chosen. Set the listening mode of your choice by
listening to the actual sound.
You can select a mode suitable for movies and TV
programs.
• Selectable listening modes:
All Ch Stereo
Direct
Dolby D
Dolby D+
Dolby EX/Dolby D EX
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR
DTS-HD MSTR
ES Discrete
ES Matrix
Full Mono
Mono
Multichannel
Neo:6
Neo:6 Cinema
PLII Movie
PLIIx Movie/PLII Movie
PLIIz Height
T-D
TV Logic
„„
MUSIC button
For details on the types and difference of listening
modes, see "Contents of Listening Modes".
You can select a mode suitable for music.
• Selectable listening modes:
All Ch Stereo
Direct
Dolby D
Dolby D+
Dolby EX/Dolby D EX
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR
DTS-HD MSTR
ES Discrete
ES Matrix
Full Mono
Multichannel
Neo:6
Neo:6 Music
Orchestra
PLII Music
PLIIx Music/PLII Music
PLIIz Height
Stereo
Studio-Mix
Unplugged
„„
GAME button
You can select a mode suitable for games.
• Selectable listening modes:
All Ch Stereo
Direct
Dolby D
Dolby D+
Dolby EX/Dolby D EX
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR
DTS-HD MSTR
ES Discrete
ES Matrix
Full Mono
Neo:6
Game-Action
Game-Rock
Game-RPG
Game-Sports
Multichannel
PLII Game
PLIIx Game/PLII Game
PLIIz Height
T-D
15
Using the Listening Modes
„„
STEREO button
„„
Dolby D + (Dolby Digital Plus)
You can select a listening mode for stereo and all channel
stereo sources.
• Selectable listening modes:
All Ch Stereo
Stereo
This mode is for use with Dolby Digital Plus sources.
The audio from the input source is output as-is, without
surround sound processing.
• Input source: 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
• When playing back 5.1 ch sources from Blu-ray Discs,
Dolby Digital is automatically applied.
Contents of Listening Modes
Selectable listening modes will differ depending on the
number of input source channels and the actual speaker
configuration. Listening modes available when headphones
are connected are: Mono, Direct, and Stereo.
Lists in alphabetic order (A-Z)
„„
All Ch Stereo
Ideal for background music, this mode fills the entire
listening area with stereo sound from the front, surround,
and surround back speakers.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
„„
Direct
In this mode, audio from the input source is output as-is.
For example, if a 2 ch source from a music CD is input, the
output will be stereo, or if Dolby Digital signal is input, the
sound field will be controlled in accordance with the number
of channels present.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch
„„
Dolby EX/Dolby D EX
This mode expands any 5.1 ch music or movie source for
6.1/7.1 ch playback that can give an effect of surround
back speaker. It is suitable for the Dolby EX soundtrack
containing the matrix-encoded surround back channel.
Adding the surround back effect to 5.1 ch source will
improve spatial representation by creating a moving sound
effect of 360-degree surround sound or overhead sound
and giving a realistic experience.
• Input source: 5.1 ch
• Speaker configuration: 7.1 ch surround back
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
Dolby Pro Logic IIx/Dolby Pro Logic II
„„
Dolby D (Dolby Digital)
This mode expands any 2 ch source for 7.1-ch playback.
It provides a very natural and seamless surround-sound
experience, keeping the sound clear.
• In case of 5.1 ch without surround back speaker, the
mode becomes Dolby Pro LogicII instead of Dolby Pro
Logic IIx.
This mode is for use with Dolby Digital sources. The audio
from the input source is output as-is, without surround
sound processing.
• Input source: 5.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
– PLIIx Movie/PLII Movie: Use this mode with any 2 ch
movie.
– PLIIx Music/PLII Music: Use this mode with any 2 ch
music source.
– PLIIx Game/PLII Game: Use this mode with any 2 ch
game source.
• Input source: STEREO, 5.1 ch (PLIIx Movie and PLIIx
Music only)
16
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch, 7.1 ch
surround back (PLIIx Movie and PLIIx Music only)
• This listening mode can be selected only if your Blu-ray
Disc/DVD player's output setting is bitstream.
„„
Dolby TrueHD
This mode is for use with Dolby TrueHD sources. The audio
from the input source is output as-is, without surround
sound processing.
• Input source: 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
DSD
This mode is for use with DSD sources. The audio from
the input source is output as-is, without surround sound
processing.
• Input source: 5.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This unit supports DSD signals input through HDMI IN.
However, depending on the connected player, better
sound is possible when output from the PCM output of
the player. In that case, configure the player for PCM
output.
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
DTS
This mode is for use with DTS sources. The audio from
the input source is output as-is, without surround sound
processing.
• Input source: 5.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
Using the Listening Modes
„„
DTS 96/24
„„
DTS Neo:6
This mode is for use with DTS 96/24 sources. The audio
from the input source is output as-is, without surround
sound processing. With 96 kHz sampling rate and 24-bit
resolution, it provides superior fidelity.
• Input source: 5.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• Depending on the settings, this listening mode becomes
DTS.
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
This mode expands any 2 ch source for 5.1 ch multichannel
surround playback. It offers full-bandwidth on all channels,
with great independence between the channels. There are
two variants for this mode: one ideal for movies and another
ideal for music.
– Neo:6 Cinema: Use this mode with any 2 ch movie
(e.g., TV, DVD, VHS).
– Neo:6 Music: Use this mode with any 2 ch music source
(e.g., CD, radio, cassette, TV, DVD, VHS).
– Neo:6: Use this mode to expand any 5.1 ch music
source for 6.1 ch or 7.1 ch playback using Neo:6.
• Input source: STEREO (Neo:6 Cinema and Neo:6 Music
only), 5.1 ch (Neo:6 only)
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch (Neo:6
Cinema and Neo:6 Music only), 7.1 ch surround back
(Neo:6 only)
• This listening mode can be selected only if your Blu-ray
Disc/DVD player's output setting is bitstream.
„„
DTS Express
This mode is for use with DTS Express sources. The audio
from the input source is output as-is, without surround
sound processing.
• Input source: 5.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
DTS-HD HR (DTS-HD High Resolution Audio)
This mode is for use with DTS-HD High Resolution Audio
sources. The audio from the input source is output as-is,
without surround sound processing.
• Input source: 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
DTS-HD MSTR (DTS-HD Master Audio)
This mode is for use with DTS-HD Master Audio sources.
The audio from the input source is output as-is, without
surround sound processing.
• Input source: 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„„
ES Discrete (DTS-ES Discrete)
This mode is for use with DTS-ES Discrete sources and
enables 6.1 ch or 7.1 ch playback using surround back
channel. Completely discrete seven channels will improve
spatial imaging and enable 360-degree sound localization
producing a sound crossing between the surround
channels.
• Input source: 6.1 ch
• Speaker configuration: 7.1 ch surround back
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
• Use on the DVD with DTS-ES logo, particularly on the
software containing DTS-ES Matrix soundtrack.
• Playback becomes DTS if no surround back speaker is
connected.
„„
ES Matrix (DTS-ES Matrix)
This mode is for use with DTS-ES Matrix soundtrack and
enables 6.1 ch or 7.1 ch playback using matrix-encoded
back channel.
• Input source: 6.1 ch
• Speaker configuration: 7.1 ch surround back
• This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
• Use on the CD, DVD or LD with DTS-ES logo,
particularly on the software containing DTS-ES Matrix
soundtrack.
• Playback becomes DTS if no surround back speaker is
connected.
„„
Full Mono
In this mode, all speakers output the same sound in mono,
so the sound you hear is the same regardless of where you
are within the listening room.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
„„
Game-Action
In this mode, sound localization is distinct with emphasis on
bass.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
Game-Rock
In this mode, sound pressure is emphasized to heighten
live feel.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
Game-RPG
In this mode, the sound has a dramatic feel with a similar
atmosphere to Orchestra mode.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
Game-Sports
Suitable for audio source with much reverberation.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
Mono
Use this mode when watching an old movie with a mono
soundtrack, or use it to separately reproduce soundtracks
in two different languages recorded in the left and right
17
Using the Listening Modes
channels of some movies. It is also suitable for DVDs or
other sources containing multiplexed audio.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch
„„
Multichannel
This mode is for use with PCM multichannel sources.
The audio from the input source is output as-is, without
surround sound processing.
• Input source: 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
„„
Orchestra
Suitable for classical or operatic music, This mode
emphasizes the surround channels in order to widen the
stereo image, and simulates the natural reverberation of a
large hall.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
PLIIz Height (Dolby Pro Logic IIz Height)
This mode allows you to effectively use the existing
programs when height speakers are connected. It is
suitable for various kinds of sources including movie, music
and especially games.
• Input source: STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 7.1 ch height
„„
Stereo
In this mode, sound is output from the front left and right
speakers and subwoofer.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch
„„
Studio-Mix
Suitable for rock or pop music, Listening to music in this
mode creates a lively sound field with a powerful acoustic
image, like being at a club or rock concert.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of
18
multichannel surround sound even with only two or three
speakers. This works by controlling how sounds reach the
listener’s left and right ears.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch
• Good results may not be possible if there is too much
reverb, so we recommend that you use this mode in an
environment with little or no natural reverb.
„„
TV Logic
Suitable for TV shows produced in a TV studio, This mode
enhances the surround effects to the entire sound to give
clarity to voices and create a realistic acoustic image.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
„„
Unplugged
Suitable for acoustic instruments, vocals and jazz, This
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
Checking the Input Format
You can check the audio format of the input signals. While
audio from the player is being input, press Display on the
remote controller several times to switch the information
shown on the main unit display. If "Dolby D 5.1" is displayed
in Signal format, the Dolby Digital 5.1 ch signals are being
input.
Advanced Settings
4. Press / to select the desired menu, and then press
„„
Operation
Advanced Settings
1. Press RCV on the remote controller.
• Always press RCV first to change the remote
controller to Receiver mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
Enter.
SETUP
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
How to Set
4. Composite Video Input
5. Digital Audio Input
The unit allows you to configure advanced settings, such as
to remap the input and input selector, or configure various
speaker settings in order to provide even better experience.
Make the settings in "Setup" of the Home menu.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return. To return to the
Home menu, press Home.
2. Press Home to display the Home menu.
5. With the / / /
cursors, select the desired item to
configure the settings.
• When "Enter" is displayed on the setting item, press
Enter.
1-1. Monitor Out
Monitor Out
3. Select "Setup" with the /
cursors and press Enter.
Resolution
MAIN
Through
HOME
Setup
Select which HDMI output you connected to TV. HDCP 2. 2 is available for MAIN output.
To save changes and finish the setting: Press Home to
exit.
19
Advanced Settings
1.Input/Output Assign
Setting Item
Resolution
Monitor Out
The video input signals input to the unit will be converted when they are output from the
HDMI OUT jack to the TV so that their resolution can match that of the TV used.
Setting Item
Default Value
Setting Details
Monitor Out
MAIN
Select the HDMI jack to be connected with the
TV.
"MAIN": When connecting the TV to the HDMI
OUT MAIN jack
"SUB": When connecting the TV to the HDMI
OUT SUB jack
• The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
"MAIN+SUB": When connecting to both the
MAIN and SUB jacks
• Video signals input to the composite video
input jack or the COMPONENT VIDEO input
jacks will be upconverted to HDMI signals
and then output from the HDMI output jack.
• If "MAIN+SUB" is selected
– Only "Through" or "Auto" can be selected
in "Resolution".
– The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
• HDCP2.2 protected video from HDMI OUT
SUB will not be displayed.
20
Default Value
Setting Details
Through
Specify the output resolution of the HDMI OUT
jacks. The image resolution of the unit will be
converted so that it can match the resolution
supported by the TV used.
"Through": The output resolution will be the
same as that of the input signals.
"Auto": The resolution will automatically be
converted according to the resolution supported
by the TV.
"480p (480p/576p)", "720p", "1680×720p",
"1080i", "1080p", "2560×1080p": Select the
desired resolution.
"4K": About four times as high resolution
as 1080p (3840×2160 or 4096×2160 pixels
depending on the resolution supported by the
connected TV)
"Source": The output resolution will be that
specified in "Picture Adjust" - "Resolution" in the
"4.Source Setup" section.
• If "1080p" is selected, 1080p/24 input signals
will be output with an unchanged resolution.
• If the selected resolution is not supported
by the monitor, the video is displayed in the
same resolution as the input signal.
• If "4K" is selected, video signals may not
be output to some types of TV. For details,
see "Regarding the Video Resolution" in
"Troubleshooting".
• If "Monitor Out" is set to "SUB", this setting
will be set to "Through".
• Press Enter if you output signals from the
HDMI OUT MAIN jack and check the video
on the TV while making this setting. Press
Return if no video is displayed. (except when
"NET", "USB" or "BLUETOOTH" is selected)
Advanced Settings
HDMI Input
Component Video Input
It is possible to change assignment of input selector buttons and the HDMI IN jacks.
CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This
assignment can be changed if necessary. If you do not assign a jack, select "-----".
Setting Item
Default Value
Setting Details
BD/DVD
HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to BD/DVD button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
Setting Item
Default Value
Setting Details
BD/DVD
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to BD/DVD button.
CBL/SAT
COMPONENT
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to CBL/SAT button.
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can
be assigned to CBL/SAT button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
STB/DVR
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to STB/DVR button.
GAME
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to GAME button.
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can
be assigned to STB/DVR button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
PC
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to PC button.
AUX
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to AUX button.
TV/CD
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to TV/CD button.
PHONO
-----
"COMPONENT": COMPONENT VIDEO IN jack is
assigned to PHONO button.
CBL/SAT
STB/DVR
GAME
HDMI 2
HDMI 3
(HDCP2.2)
HDMI 4
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to GAME button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
PC
HDMI 5
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to PC button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
AUX
Front/MHL
The setting cannot be changed.
TV/CD
-----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to TV/CD button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
PHONO
-----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to PHONO button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
• When you convert video signals input to the COMPONENT VIDEO IN jacks and output them from
the HDMI OUT jack, set the output resolution of the player to 480i. If the input has 480p or higher
resolution, an error message will appear.
• When "Monitor Out" is set to "SUB", the 480i/576i component signals only will be output with an
unchanged resolution. Video will not be displayed if the TV does not support the resolution.
• When "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is set to "Through", the
480i/576i component signals will be output with their resolution unchanged. So, TV sets not
supporting these resolutions will not be able to display video.
21
Advanced Settings
Composite Video Input
Digital Audio Input
It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO
IN V1 to 3 jacks.
It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL
1 to 2/OPTICAL jacks.
Setting Item
Default Value Setting Details
Setting Item
Default Value Setting Details
BD/DVD
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to BD/DVD button. If
you do not assign a jack, select "-----".
BD/DVD
COAXIAL 1
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to BD/DVD button.
If you do not assign a jack, select "-----".
CBL/SAT
VIDEO 1
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to CBL/SAT button. If
you do not assign a jack, select "-----".
CBL/SAT
COAXIAL 2
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to CBL/SAT button.
If you do not assign a jack, select "-----".
STB/DVR
VIDEO 2
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to STB/DVR button.
If you do not assign a jack, select "-----".
STB/DVR
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to STB/DVR button.
If you do not assign a jack, select "-----".
GAME
VIDEO 3
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to GAME button. If
you do not assign a jack, select "-----".
GAME
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to GAME button. If
you do not assign a jack, select "-----".
PC
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to PC button. If you
do not assign a jack, select "-----".
PC
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PC button. If you
do not assign a jack, select "-----".
AUX
Front
The setting cannot be changed.
AUX
-----
TV/CD
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to TV/CD button. If
you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to AUX button. If
you do not assign a jack, select "-----".
TV/CD
OPTICAL
PHONO
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to PHONO button. If
you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to TV/CD button. If
you do not assign a jack, select "-----".
PHONO
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PHONO button.
If you do not assign a jack, select "-----".
• When "Monitor Out" is set to "SUB", the 480i/576i composite signals only will be output with an
unchanged resolution. Video will not be displayed if the TV does not support the resolution.
• When "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is set to "Through", the
480i/576i composite signals will be output with their resolution unchanged. So, TV sets not supporting
these resolutions will not be able to display video.
22
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32/44.1/48/88.2/96
kHz/16, 20, 24 bit.
Advanced Settings
2.Speaker Setup
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of subwoofer,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup.
Furthermore, this setting cannot be selected if headphones are connected or audio is
output from the speakers of the TV.
Allows you to change the speaker configuration such as presence or not of each speaker,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup. Audio will not be output while you are making this setting.
Setting Item
Default Value
Setting Details
Subwoofer
Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
100Hz
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• "Front" will be fixed to "Full Band" if "Subwoofer"
is set to "No", and the bass frequencies of the
other channels will be output from the front
speakers. To make the settings, refer to the
instruction manual of the speakers used.
Center
100Hz
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• This setting cannot be set to "Full Band" unless
"Front" is set to "Full Band".
Surround
100Hz
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• This setting cannot be set to "Full Band" unless
"Front" is set to "Full Band".
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection,
and other speaker settings.
Setting Item
Default Value
Setting Details
Speaker
Impedance
(Australian model)
6ohms
Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers have
4 Ω or more to less than 6 Ω impedance
"6ohms": When the connected speakers all have 6 Ω
or more impedance
Front Speakers
Type
Normal
Select the type of front speaker connection.
"Normal": When front speakers are connected in a
normal manner
"Bi-Amp": When front speakers are bi-amp
connected
Powered Zone 2
No
Set presence of speaker terminal connection of
Zone 2.
"Yes": When speakers are connected to ZONE 2
speaker terminals
"No": When speakers are not connected to ZONE 2
speaker terminals
• If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "No".
• For impedance, check the indications on the back of the speakers or their instruction manual.
23
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Back
100Hz
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• In the following cases, the setting will be set to
"None":
– "Surround" is set to "None".
– "Front Speakers Type" is set to "Bi-Amp".
– "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
• "Full Band" cannot be set unless "Surround" is
set to "Full Band".
Double Bass
-----
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
• The setting will not automatically be configured
even if you performed the automatic speaker
setup.
• If "Subwoofer" is set to "No" or if "Front" is set to
other than "Full Band", the setting will be fixed to
"-----".
Back Channel
2ch
Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK or HEIGHT L terminal)
"2ch": When two speakers are connected
• The setting cannot be changed if "Back" is set to
"None".
Height
LPF of LFE
24
None
120Hz
Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• In the following cases, the setting will be set to
"None":
– "Surround" is set to "None".
– "Front Speakers Type" is set to "Bi-Amp".
– "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
• "Full Band" cannot be set unless "Front" is set to
"Full Band".
Set the low-pass filter for LFE (low-frequency effect)
signals in order to pass lower frequency signals than
the set value and thus cancel unwanted noises. The
low-pass filter will be effective only on sources with
LFE channel.
Set a frequency from "80Hz", "90Hz", "100Hz" and
"120Hz".
"Off": Do not use this function
Speaker Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item
Default Value
Setting Details
Unit
feet/meters
Specify the unit of distance for configuring
settings.
"feet": When setting in feet (0.1 ft to 30.0 ft, in
increments of 0.1 ft)
"meters": When setting in meters (0.03 m to 9.00
m, in increments of 0.03 m)
Front Left
12.0 ft/3.60 m
Specify the distance between each speaker and
the listening position.
Center
12.0 ft/3.60 m
Specify the distance between each speaker and
the listening position.
Front Right
12.0 ft/3.60 m
Specify the distance between each speaker and
the listening position.
Surround Right
7.0 ft/2.10 m
Specify the distance between each speaker and
the listening position.
Back Right
7.0 ft/2.10 m
Specify the distance between each speaker and
the listening position.
Back Left
7.0 ft/2.10 m
Specify the distance between each speaker and
the listening position.
Surround Left
7.0 ft/2.10 m
Specify the distance between each speaker and
the listening position.
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Subwoofer
12.0 ft/3.60 m
Specify the distance between each speaker and
the listening position.
Subwoofer
0 dB
Height Left
9.0 ft/2.70 m
Specify the distance between each speaker and
the listening position.
Select a value between "-15 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Height Left
0 dB
Height Right
9.0 ft/2.70 m
Specify the distance between each speaker and
the listening position.
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Height Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
• When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed.
• Default values vary depending on the regions.
• In the following cases, the settings for "Level Calibration" cannot be changed:
– The speaker is set to "No" or "None" in "Speaker Configuration".
– Mute (MUTING) is set.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item
Default Value
Setting Details
Front Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Center
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Front Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Surround Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Back Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Back Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Surround Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
3.Audio Adjust
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes.
Multiplex/Mono
Setting Item
Default Value
Setting Details
Multiplex
Input Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be
output at the same time.
• If multiplex audio is being played, "1+1" will
be displayed when Display on the main unit is
pressed.
Mono
Input Channel
Left+Right
Set the input channel to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
25
Advanced Settings
Dolby
Setting Item
Default Value
Setting Details
Make the settings for Dolby listening mode.
Dolby EX
Dolby EX
Manual
The Dolby Digital EX listening mode will
automatically be selected when Dolby EX
signals are input.
"Auto": Use this function
"Manual": Select the desired listening mode
• The setting cannot be changed if "Back" is
set to "None" in "Speaker Configuration".
Loudness
Management
On
Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume.
"On": Use this function
"Off": Do not use this function
Setting Item
Default Value
Setting Details
PLIIx Music (2ch
Input)
Panorama
Off
Adjust the sound field setting for playing any 2
ch digital source such as Dolby Digital or 2 ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Select the width of sound
field.
"On": Width of sound field will be increased.
"Off": Default value
PLIIx Music (2ch
Input)
Dimension
0
PLIIx Music (2ch
Input)
Center Width
3
PLIIz Height Gain
Mid
Adjust the sound field setting for playing any 2
ch digital source such as Dolby Digital or 2 ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Select the depth of sound
field.
"-3" to "+3": The sound field shifts forward as
the set value becomes smaller than "0" and
backward if the set value become larger than
"0".
Configure the setting to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Adjust the width of the
sound from the center speaker).
"0" to "7": The smaller the setting value is, the
more concentrated in the center speaker is
the sound, while the larger the setting value is,
the more distributed to the front left and right
speakers is the sound of the center speaker.
Adjust the output level of the height speakers in
the Dolby Pro Logic IIz Height listening mode.
The output of the height speakers will be
enhanced in the order of "Low", "Mid" (Middle),
"High": "Low", "Mid" and "High".
• The setting cannot be changed if "Height" is
set to "None" in "Speaker Configuration".
• Depending on the setting of "Back" in "Speaker Configuration", the display will be changed. "PLllx" will
be displayed as "PLllx/PLII".
DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting Item
Default Value
Setting Details
Neo:6 Music
Center Image
2
Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center
while selecting a larger value spreads the sound
field of the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item
Default Value
Setting Details
Listening Angle
Wide
Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
• Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
26
Advanced Settings
4.Source Setup
Name Edit
Adjust the volume level difference among the multiple devices connected to this unit,
rename an input selector, or adjust the image quality. The setting can be separately set to
each input selector button. When you select a desired input to check the video or audio,
start playback of the connected device.
AccuEQ Room Calibration
Setting Item
Default Value
Setting Details
AccuEQ Room
Calibration
Off
Enable/disable the sound field set in automatic
speaker setup
"On": Enable this function
"Off": Disable this function
In the following cases, the setting cannot be
changed:
– Automatic speaker setup is not performed.
– Headphones are connected.
Setting Item
Default Value
Setting Details
IntelliVolume
0 dB
Adjust the volume level difference between the
devices connected to the unit. Select a value
between "-12 dB" to "+12 dB". Set a negative
value if the volume of the target device is larger
than the others and a positive value if smaller.
• This function is not effective in Zone 2.
IntelliVolume
Set an easy name to each input. The set name will be shown on the main unit display.
Setting Item
Default Value
Setting Details
Name
Input name
1. Select a character or symbol with the
cursors and press Enter.
Repeat it to input 10 or less characters.
"Shift": Switches between upper and
lower cases. (Pressing +10 on the remote
controller also toggles between upper and
lower cases.)
" " " ": Moves the cursor to the arrow
direction.
"Back Space": Removes a character on the
left of the cursor.
"Space": Puts a space.
• Pressing CLR on the remote controller
will remove all the input characters.
2. After inputting, select "OK" with the cursors
and press Enter.
The input name will be saved.
• To name a preset radio station, press Tuner on the remote controller, select AM/FM and select the
preset number.
• It cannot be set if the input is "NET", "USB" or "BLUETOOTH".
27
Advanced Settings
Picture Adjust
Setting Item
Default Value
Setting Details
Adjust the image quality. (Possible only when the video player is connected to the HDMI
OUT MAIN jack) If you adjust it by checking the video, press Enter. Press Return to return
the screen to the previous status.
Picture Mode
Custom
An appropriate image quality setting for cinema
or game can be selected. You can also adjust
each item to obtain your favorite image quality.
"Custom": The items from "Game Mode" to "Blue
Contrast" can be adjusted as desired.
"Cinema": When the video source is cinema
"Game": When the video source is game
"Standard": The resolution will be changed but
the image quality will not be adjusted.
"Bypass": Both the resolution and image quality
will not be adjusted.
• If you select "Bypass", the on-screen display
function will be disabled.
Game Mode
Off
Change to the setting suitable for game. Also
correct the delay of video signals of the game
console if any.
"On": Use this function
"Off": Do not use this function
• If you select "On", the delay will be corrected
but the image quality will be lower.
• The setting will be fixed to "Off" if
"Resolution" is set to "4K".
Film Mode
Auto
Change to the setting suitable for film.
"Auto": Image processing suitable for film will be
executed.
"Video": "Film Mode" will not be applied and the
input signals will be processed as video source.
Edge
Enhancement
Off
Adjust the sharpness of the outline of image.
Select from "Off", "Low", "Mid" (Middle), and
"High".
• The setting will be fixed to "Off" if "Game
Mode" is set to "On".
• When the horizontal resolution of the output
video is 2,000 TV lines or more, this setting is
set to "Off".
Noise Reduction
Off
Reduces the noise of the screen. Select from
"Off", "Low", "Mid" (Middle), and "High".
• The setting will be fixed to "Off" if "Game
Mode" is set to "On".
Setting Item
Default Value
Setting Details
Wide Mode
Auto
Set the aspect ratio.
"Auto": The aspect ratio will automatically be set
according to the input signals and the monitor
output setting.
"4:3":
"Full":
"Zoom":
"Wide Zoom":
• When a 3D or 4K video source is input, this
setting is set to "Full". Furthermore, for some
resolutions, this setting may be disabled and
set to "Full".
28
Advanced Settings
Setting Item
Resolution
Default Value
Setting Details
Through
Adjust the output resolution of the HDMI OUT
jacks. The image resolution of the unit will be
converted so that it can match the resolution
supported by the TV used.
"Through": The output resolution will be the
same as that of the input signals.
"Auto": The resolution will automatically be
converted to the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p",
"1080i", "1080p", "2560×1080p": Select the
desired resolution.
"4K": About four times as high resolution
as 1080p (3840×2160 or 4096×2160 pixels
depending on the resolution supported by the
connected TV)
• The setting can be selected only when
"Source" is selected in "1.Input/Output
Assign" - "Monitor Out" - "Resolution".
• If "4K" is selected, video signals may not
be output to some types of TV. For details,
see "Regarding the Video Resolution" in
"Troubleshooting".
Brightness
0
Adjust brightness of the screen. Select a value
between "-50" to "+50".
Contrast
0
Adjust contrast of the screen. Select a value
between "-50" to "+50".
Hue
0
Correct hue of the screen. Select a value
between "-50" to "+50".
Saturation
0
Adjust saturation of the screen. Select a value
between "-50" to "+50".
Color Temperature Normal
Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
Gamma
0
Adjust the relative relation between the R (red),
G (green) and B (blue) data signals of the input
image and those of the output image. Select a
value between "-3" to "+3".
Red Brightness
0
Adjust the brightness of red of the screen. Select
a value between "-50" to "+50".
Red Contrast
0
Adjust the contrast of red of the screen. Select a
value between "-50" to "+50".
Setting Item
Default Value
Setting Details
Green Brightness
0
Adjust the brightness of green of the screen.
Select a value between "-50" to "+50".
Green Contrast
0
Adjust the contrast of green of the screen.
Select a value between "-50" to "+50".
Blue Brightness
0
Adjust the brightness of blue of the screen.
Select a value between "-50" to "+50".
Blue Contrast
0
Adjust the contrast of blue of the screen. Select
a value between "-50" to "+50".
• In the following cases, the settings for "Picture Adjust" cannot be changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "Monitor Out" is set to "SUB".
• Press CLR on the remote controller if you return all the settings from "Game Mode" through "Blue
Contrast" to their default value.
29
Advanced Settings
Audio Selector
5.Listening Mode Preset
Make the audio input setting. The setting can be separately set to each input selector
button. Select the input selector to configure.
Setting Item
Default Value
Setting Details
Audio Selector
–
Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
• The setting can be selected only when "Audio
Return Channel" is set to "Auto" and also the
"TV/CD" input is selected.
"HDMI": When giving priority to input signal from
HDMI jacks
• The setting can be selected only when the
input is assigned to the HDMI IN jack in the
"HDMI Input" setting.
"COAXIAL (Coaxial input)": When giving priority
to input signal from DIGITAL IN COAXIAL jacks.
• The setting can be selected only when the
input is assigned to the COAXIAL jack in the
"Digital Audio Input" setting.
"OPTICAL (Optical input)": When giving priority to
input signal from DIGITAL IN OPTICAL jacks.
• The setting can be selected only when the
input is assigned to the OPTICAL jack in the
"Digital Audio Input" setting.
"Analog": To always output analog audio
independently of the input signal
Fixed Mode
Off
Specify an input signal when "HDMI", "COAXIAL
(Coaxial input)", or "OPTICAL (Optical input)" is
selected for "Audio Selector". Set this item if noise
is produced, or truncation occurs at the beginning
of a track that follows a gap when playing PCM or
DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM.
"DTS": To fix the input source to DTS (except for
DTS-HD).
• Changing "Audio Selector" changes the
setting to "Off".
• The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is selected.
30
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
Select the input, signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item
Default Value
Setting Details
Analog/PCM
All Ch Stereo
Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/Multiplex
Source
Full Mono
Set the listening mode for playing Dolby Digital,
AAC and other digital signals recorded in
monaural or multiplex audio.
2ch Source
PLIIx Movie
Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/Dolby
D Plus/TrueHD
Straight
Decode
Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
DTS/DTS-ES/DTSHD
Straight
Decode
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich Source Straight
Decode
•
•
•
•
•
Set the listening mode for playing DSD signals of
AAC, DVD-Audio and Super Audio CD that are
input from HDMI IN jack.
Available listening modes vary depending on the input signal.
Setting "Last Valid" will always select the last selected mode.
Only "Analog" can be set to the "TUNER" input.
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
Only "Digital" can be set to the "BLUETOOTH" input.
Advanced Settings
6.Miscellaneous
12V Trigger A Setup
Volume Setup
You can enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack. When the desired input is selected, power link
operation will be activated with a control signal of maximum 12 V/150 mA output from the
12V trigger output jack.
Make the detailed volume setting of the unit.
Setting Item
Default Value
Setting Details
Maximum Volume
Off
Set the maximum value to avoid too high volume.
Select a value from "Off", "30" to "79".
Power On Volume
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "79"
and "Max".
• You cannot set a higher value than that of
"Maximum Volume".
Headphone Level
0 dB
Setting Item
Default Value
Setting Details
Delay
0 sec
Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0 sec" to "3 sec".
BD/DVD
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
CBL/SAT
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
Adjust the volume level difference between
speakers and headphones. Select a value
between "-12 dB" to "+12 dB".
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting Item
Default Value
Setting Details
On Screen Display
On
Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
• The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language
English
Select the on-screen display language.
Screen Saver
3min
Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
31
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
STB/DVR
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
TV/CD
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
GAME
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
PHONO
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
PC
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
TUNER
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
AUX
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
NET
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
32
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
USB
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
BD/DVD
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
BLUETOOTH
Main
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
CBL/SAT
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
STB/DVR
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
GAME
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
12V Trigger B Setup
You can enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack. When the desired input is selected, power link
operation will be activated with a control signal of maximum 12 V/150 mA output from the
12V trigger output jack.
Setting Item
Default Value
Setting Details
Delay
1 sec
Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0 sec" to "3 sec".
33
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
PC
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
TUNER
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
AUX
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
NET
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
TV/CD
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
USB
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
PHONO
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
BLUETOOTH
Main/Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
34
Advanced Settings
12V Trigger C Setup
Setting Item
Default Value
Setting Details
You can enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack. When the desired input is selected, power link
operation will be activated with a control signal of maximum 12 V/150 mA output from the
12V trigger output jack.
STB/DVR
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
GAME
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
PC
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
AUX
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
Setting Item
Default Value
Setting Details
Delay
2 sec
Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0 sec" to "3 sec".
BD/DVD
CBL/SAT
Zone2
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
35
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
TV/CD
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
USB
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
PHONO
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
BLUETOOTH
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
TUNER
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
NET
Zone2
Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected as
input source of main room or Zone 2 playback
36
Advanced Settings
7.Hardware Setup
HDMI
Multi Zone
Setting Item
Default Value
Setting Details
Zone 2 Out
Fixed
Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 2 Maximum
Volume
Off
Set the maximum value for Zone 2 to avoid too
high volume.
Select a value from "Off", "50" to "99".
Zone 2 Power On
Volume
Last
Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
• You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Setting Item
Default Value
Setting Details
AM/FM Frequency
Step
(North American
model)
10kHz/200kHz
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
• When this setting is changed, all radio
presets are deleted.
AM Frequency Step
(Australian model)
9kHz
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
• When this setting is changed, all radio
presets are deleted.
Tuner
Setting Item
Default Value
Setting Details
HDMI CEC (RIHD)
Off
Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
• Depending on the TV set, a link may need to
be configured on the TV.
• This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
• Setting to "On" and closing the on-screen
menu displays the name of the CECcompatible components and "RIHD On" on
the display.
• Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
• If you operate the Master Volume control of
the unit when this setting is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output also
from the speakers connected to the unit. If
you want to output from only either of them,
change the unit or TV settings, or reduce the
volume of the unit.
• If abnormal operation occurs when you set
the setting to "On", set it to "Off".
• When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
• When changing this setting, turn off and
then on again the power of all connected
components.
37
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
HDMI Through
Off
You can display the video of an HDMI connected
player on the TV even if the unit is in standby
mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in
"HDMI Input". It cannot be set to any other input
selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device
connected to any jack will not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD", "PHONO": Video of the
device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the
HDMI IN jack assigned to the input selector that
was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the
HDMI IN jacks will be output to the TV.
"Eco": Video of all the devices connected to the
HDMI IN jacks will be output to the TV. If you
select this setting when using a CEC-compatible
TV, you can reduce the power consumption in
standby mode.
• "Auto" and "Eco" cannot be selected if "HDMI
CEC (RIHD)" is set to "Off".
• When "HDMI Through" is enabled, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
• When changing the setting, turn off and
then on again the power of all connected
components.
Audio TV Out (MAIN) Off
38
Default Value
Setting Details
You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
• If you select "On", set "HDMI CEC (RIHD)" to
"Off."
• The setting is fixed to "Auto" if "HDMI CEC
(RIHD)" is set to "On".
• Listening mode cannot be changed if "Audio
TV Out (MAIN)" is set to "On" and audio is
being output through the speakers of the TV.
• Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting is
set to "On". In such case, audio is output from
the speakers of the unit.
• If you operate the Master Volume control
of the unit when "Audio TV Out (MAIN)"
or "HDMI CEC (RIHD)" is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output from
the unit. If you do not want to output audio
from the unit, change the unit or TV settings,
or reduce the volume of the unit.
• "Audio TV Out (MAIN)" is fixed to "Off" if
"Monitor Out" is set to "SUB".
Advanced Settings
Setting Item
Default Value
Setting Details
Audio TV Out (SUB)
Off
You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
• Listening mode cannot be changed while
"Audio TV Out (SUB)" is set to "On" and
audio is being output through the speakers of
the TV.
• Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting is
set to "On". In such case, audio is output from
the speakers of the unit.
• If you operate the Master Volume control of
the unit when "Audio TV Out (SUB)" is set
to "On" and you are listening to the audio
through the speakers of your TV, audio will
be output from the unit. If you do not want to
output audio from the unit, change the unit or
TV settings, or reduce the volume of the unit.
• "Audio TV Out (SUB)" is fixed to "Off" if
"Monitor Out" is set to "MAIN".
Audio Return
Channel
–
You can enjoy sound of the HDMI connected
ARC compatible TV through the speakers
connected to the unit. To use this function, set
"HDMI CEC (RIHD)" to "On" in advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
Lip Sync
On
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
InstaPrevue
Change the preview display of the video input
through HDMI, which will be displayed using
"InstaPrevue" in the Home menu.
• Depending on the video source, the preview
thumbnails configured in "InstaPrevue" may
not be displayed properly.
Setting Item
Default Value
Setting Details
Sub Window
Multi
Set how to display preview thumbnails.
"Multi": Displays all the thumbnails of HDMI IN 1,
2, 3, 4 and Front at once.
"Single": Displays each thumbnail individually.
Position
Bottom/Lower
Right
Set the position to display preview thumbnails.
When "Multi" is selected for "Sub Window":
Select from "Top", "Bottom", "Left" and "Right".
When "Single" is selected for "Sub Window":
Select from "Upper Left", "Upper Right", "Lower
Left" and "Lower Right".
• If "Monitor Out" is set to "MAIN+SUB" and "Audio TV Out (SUB)" is set to "On"
– Set the audio output of the connected device to "2ch PCM".
– If the audio input is via other than HDMI, sound of the TV connected to the HDMI OUT SUB jack
will not be output.
Auto Standby
Setting Item
Default Value
Setting Details
Auto Standby
On/Off
This setting places the unit on standby
automatically after 20 minutes of inactivity
without any video or audio input.
"On": The unit will automatically enter standby
mode ("ASb" will stay lit).
"Off": The unit will not automatically enter
standby mode.
• "Auto Standby" is appeared on the display
and menu screen 30 seconds before the
Auto Standby comes on.
• "Auto Standby" does not work when Zone 2
is active.
• Default values vary depending on the
regions.
Off
Enable or disable "Auto Standby" while "HDMI
Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
• "HDMI Through" cannot be set to "On" if
"Auto Standby" is set to "Off".
HDMI Through
• When "HDMI Through" is used, the power consumption increases even when the unit is on standby.
However, the increase in power consumption is kept to a minimum by automatically entering the
HYBRID STANDBY mode, where only the essential circuit is operating.
39
Advanced Settings
Network
Setting Item
Default Value
Setting Details
Make the network setting.
• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the
setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each
components, you must set "DHCP" to "Disable" and assign an address to this unit in
"IP Address" as well as set information related to your LAN, such as Subnet Mask and
Gateway.
DHCP
Enable
"Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
• If selecting "Disable", you must set "IP
Address", "Subnet Mask", "Gateway", and
"DNS Server" manually.
IP Address
–
Displays/Sets the IP address.
–
Displays/Sets the subnet mask.
Setting Item
Default Value
Setting Details
Subnet Mask
Network Standby
Off
You can turn on the power of the unit via network
using an application such as Integra/Onkyo
Remote.
"On": Use this function
"Off": Do not use this function
• When "Network Standby" is used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY
mode, where only the essential circuit is
operating.
Gateway
–
Displays/Sets the gateway.
DNS Server
–
Displays/Sets the primary DNS server.
Proxy URL
–
Displays/Sets the proxy server URL.
Proxy Port
–
Displays/Sets the proxy server port number when
you enter "Proxy URL".
Network Check
–
You can check the network connection.
Press Enter when "Start" is displayed.
Wi-Fi
Off(Wired)
Connect the unit to network via wireless LAN
router.
"On": Wireless LAN connection
"Off(Wired)": Wired LAN connection
Wi-Fi Setup
–
You can configure wireless LAN settings by
pressing Enter when "Start" is displayed.
Wi-Fi Status
–
The information of the connected access point
will be displayed.
"SSID": SSID of the connected access point.
"Security": Security method of the connected
access point.
"Signal": Signal strength of the connected access
point.
"Status": Status of the connected access point.
MAC Address
40
–
This is the MAC address of the AV receiver.
This value is specific to the component and
cannot be changed.
• Wait for a while if "Network" cannot be selected. It will appear when the network function is started up.
Bluetooth
Setting Item
Default Value
Setting Details
Bluetooth
On
Select whether or not to use the Bluetooth
function.
"On": Enables connection with a Bluetoothenabled device by using the Bluetooth function.
Select "On" also when making various Bluetooth
settings.
"Off": When not using the Bluetooth function
Direct Change
On
The input of the unit will automatically be
switched to "BLUETOOTH" when connection is
made from a Bluetooth-enabled device to the
unit.
"On": The input will automatically become
"BLUETOOTH" when a Bluetooth-enabled
device is connected.
"Off": The function is disabled.
• If the input is not switched automatically, set
to "Off" and change the input manually.
Advanced Settings
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Auto Reconnect
On
This function automatically reconnects to the
Bluetooth-enabled device connected last when
you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
• This function may not work depending on
your Bluetooth-enabled device.
Status
–
Displays the status of the Bluetooth-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
Wakeup via
Bluetooth
Pairing Information
Device
Off
–
–
This function wakes up the unit on standby by
connecting a Bluetooth-enabled device.
"On": Use this function
"Off": Do not use this function
• Setting to "On" increases the power
consumption even when the unit is on
standby. However, the increase in power
consumption is kept to a minimum by
automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
• This setting is fixed to "Off" if "Direct Change"
is set to "Off".
• Wait for a while if "Bluetooth" cannot be selected. It will appear when the network function is started
up.
Firmware Update
Setting Item
Default Value
Setting Details
Update Notice
Enable
Availability of a firmware update will be notified
via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version
–
The current firmware version will be displayed.
Update via NET
–
Press Enter to select when you want to update
the firmware via network.
• You will not be able to select this setting if
you do not have Internet access or there is
nothing to update.
Update via USB
–
Press Enter to select when you want to update
the firmware via USB.
• You will not be able to select this setting if
a USB storage device is not connected or
there is nothing to update in the USB storage
device.
When paring is performed, the information of
the previous pairing stored in this unit will be
initialized.
Pressing Enter when "Clear" is displayed
initializes the pairing information stored in this
unit.
• This function does not initialize the pairing
information on the Bluetooth-enabled device.
When pairing the unit again with the device,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance.
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual.
Initial Setup
Displays the name of the Bluetooth-enabled
device connected to the unit.
• The name is not displayed when "Status" is
"Ready" and "Pairing".
You can make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It will appear when the network
function is started up.
• Setting is not possible if "Monitor Out" is set to "SUB".
• Wait for a while if "Firmware Update" cannot be selected. It will appear when the network function is
started up.
41
Advanced Settings
8.Remote Controller Setup
Setting Item
Default Value
Setting Details
Remote ID
1
Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Integra/Onkyo components
that are installed in the same room. After
changing the ID on the main unit, change the
ID on the remote controller accordingly with the
following procedure.
1. While holding down RCV, press Q Setup for
about 3 seconds until the remote indicator
stays lit.
2. With the number buttons, press one of 1, 2,
and 3. The remote indicator flashes twice.
Remote Mode Setup
–
Input and register the remote controller code of
other devices.
• For registration of the remote control code,
refer to "Operating Other Components Using
Remote Controller".
Setting Item
Default Value
Setting Details
Setup
Unlocked
The Setup menu will be locked to protect the
settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
9.Lock Setup
42
Operating Other Components Using Remote Controller
1. Press RCV and then press Home on the remote
Operating Other Components
Using Remote Controller
controller.
Functions of Remote Mode Buttons
You can control any other device than this unit by
programming a specified remote control code to a Remote
Mode button of the remote controller. Register a remote
control code to a desired Remote Mode button and press
it to enter the remote mode that allows you to operate the
corresponding device.
¼¼
The RCV and Zone2 buttons cannot be programmed.
Programming Remote Control Codes
For information on the configuration and operation
of Integra/Onkyo components with RI jack, refer to
"Connecting and Operating Integra/Onkyo RI Components".
Furthermore, the following Remote Mode buttons are
preprogrammed with remote control codes.
BD/DVD: Integra/Onkyo Blu-ray Disc and DVD player
TV/CD: Integra/Onkyo CD player
STB/DVR: Apple TV
„„
Searching in the Setup Menu
You can search a remote control code and register it to a
desired Remote Mode button in the unit's Setup menu.
2. Select "Setup" with the cursors and press Enter.
3. With the cursors, select "8.Remote Controller Setup" "Remote Mode Setup" and press Enter.
4. With the cursors, select the remote mode for which you
want to search a remote control code and press Enter to
display the category selection screen.
5. Select the target category with the cursors, and then
press Enter to display the brand name input screen.
6. Select a character with the cursors and press Enter.
Repeat it to enter the first three characters of the brand
name.
7. Select "Search" with the cursors and press Enter.
• After a search is done, the list of possible brand
names is displayed. If the brand name list is not
displayed, select "Not Listed" with the cursors and
press Enter to return to the brand name input screen
in step 6.
8. Select the target brand name with the cursors, and then
press Enter.
• When the brand name is specified, the remote
control code of the brand and how to register it will
be displayed on the TV screen.
9. Follow the guidance displayed on the TV screen.
10.If the component can successfully be operated with its
registered remote control code, select "OK" with the
cursors and press Enter.
• Only TV remote control codes can be entered for TV.
• Program a remote control code in accordance
with the input since each button also works as the
input selector. (For example, when the CD player is
connected to the TV/CD jack, program the remote
control code for the CD player to TV/CD.)
• If the component cannot be operated, select "Try
Next Code" with the cursors and press Enter to
display another code.
• It is possible to operate an MHL-enabled mobile
device with the unit's remote controller by registering
the code of the MHL-enabled mobile device below
to the unit's remote controller. Operation may be
unstable or incorrect depending on the mobile device
used.
33101 (North American model)
32910 (Australian model)
„„
Consulting the Remote Control Code List
Find the remote control code in the remote control code list.
1. Look up the Remote Control Code List for the
corresponding remote control code.
• The codes in the Remote Control Code List are
those known as of the date of publication and may
be changed.
• Only TV remote control codes can be entered for TV.
• Program a remote control code in accordance
with the input since each button also works as the
input selector. (For example, when the CD player is
connected to the TV/CD jack, program the remote
control code for the CD player to TV/CD.)
2. Press Display for 3 or more seconds while holding down
the Remote Mode button to which you want to program
the remote control code.
• The remote indicator stays lit in the input mode.
43
Operating Other Components Using Remote Controller
3. With the number buttons, enter the 5-digit remote control
code within 30 seconds.
• The registration is complete when the remote
indicator flashes twice. The remote indicator flashes
once slowly when registering the remote control
code fails. Try the registration again.
once slowly when registering the remote control
code fails. Try the registration again.
• Pressing any other button than a colored button
cancels the remap operation.
TV Operation
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
„„
Resetting the Remote Mode Buttons
„„
Remapping the Colored Buttons
The colored button assignment on the AV receiver's remote
controller can be remapped to match that on the remote
controller of the component whose remote control code you
programmed to Remote Mode. However, you will not be
able to remap the colored buttons if Zone 2 is selected.
You can reset the remote control code registered in the
Remote Mode button to its default status. This operation
can be executed on a single Remote Mode button.
1. Press Home for 3 or more seconds while holding down
the Remote Mode button you want to reset.
• The remote indicator stays lit.
2. Within 30 seconds, press the Remote Mode button
again.
• Resetting is complete when the remote indicator
flashes twice.
2. Within 30 seconds, press the colored buttons from left to
right, in the order you want to remap.
• For example, if the colored buttons on the remote
controller of the other component are yellow, green,
blue, and red from left to right, press the buttons on
the AV receiver's remote controller in that order.
• The registration is complete when the remote
indicator flashes twice. The remote indicator flashes
44
3
2
4
1 Remote Mode
2 , Input, VOL /
3 Muting
4 CH +/-
1. Hold down the Remote Mode button to map and A (Red)
simultaneously until the remote indicator stays lit (about
3 seconds).
• Remapping is possible only for codes included in the
categories of the Remote Control Code List such as
DVD player and TV.
1
To reset all the remote controller settings: While holding
down RCV, press and hold down Home until the remote
indicator lights (about 3 seconds). Press RCV again within
30 seconds. Reset is complete when the remote indicator
flashes twice.
5
8
6
7
9
F
5 Guide
6 / / / , Enter
7 Setup
8 PREV CH
9 Return
F Audio ()
Operating Other Components Using Remote Controller
VCR/PVR Operation
G
H
5
8
6
7
9
F
I
J
, , ,
,
,
,
()
G H A (Red), B (Green), C (Yellow), D (Blue)
I Number 1 to 9, 0, +10
J CLR, Display
¼¼
Not CEC-compatible.
5 Top Menu
6 / / / , Enter
7 Setup
8 Menu
9 Return
F Audio ()
2
1
G
Blu-ray Disc Player/DVD Player/DVD Recorder
Operation
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
3
4
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
3
H
4
I
J
, , ,
,
,
,
G H A (Red), B (Green), C (Yellow), D (Blue)
I Number 1 to 9, 0, +10 ()
J CLR, Display
¼¼
Not CEC-compatible.
1 Remote Mode
2 Source
3 Muting
4 CH +/-
5
8
6
7
9
5 Guide
6 / / / , Enter
7 Setup
8 PREV CH
9 Return
1 Remote Mode
2 Source
3 Muting
4 CH +/-, Disc +/-
45
Operating Other Components Using Remote Controller
CD Player Operation
F
5
8
6
7
9
F
G
H
, , ,
,
,
F G Number 1 to 9, 0, +10
H CLR, Display
,
5 Guide
6 / / / , Enter
7 Setup
8 PREV CH
9 Return
F Audio
Satellite Receiver/Cable Receiver Operation
G
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
H
2
1
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
3
4
I
J
, , ,
,
,
,
G H A (Red), B (Green), C (Yellow), D (Blue)
I Number 1 to 9, 0, +10
J CLR, Display
1 Remote Mode
2 Source
3 Muting
4 DISC +/-
5
6
3
4
1 Remote Mode
2 Source
3 Muting
4 CH +/-
46
5 / / / , Enter
6 Setup
Operating Other Components Using Remote Controller
To Operate CEC-compatible Components
7
The TV and BD/DVD buttons on the remote controller
are preprogrammed with remote control codes for linked
operation of some CEC (Consumer Electronics Control)compatible TV sets and Blu-ray Disk players. By connecting
to the unit via HDMI, you may operate them using the AV
receiver's remote controller.
• If you cannot operate your CEC-compatible component,
program one of the following remote control codes to the
TV or BD/DVD button.
TV: 11807/13100/13500 (CEC-compatible TV)
BD/DVD: 32910/33101/33501/31612 (CEC-compatible
BD/DVD player)
8
9
F
, , ,
,
,
,
7 8 Search, Repeat, Random, Mode
9 Number 1 to 9, 0, +10
F CLR, Display
Cassette Tape Deck Operation
Press the Remote Mode button programmed with the
remote control code for the relevant AV component to
switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
3
1 Remote Mode
2 Source
3 Muting
4
4 (Reverse Playback),
,
,
,
,
47
Advanced Speaker Connection
2Select "Setup" with the cursors and press Enter.
3With the cursors, select "2.Speaker Setup" -
Advanced Speaker Connection
"Speaker Settings" - "Front Speakers Type".
4Select "Bi-Amp" with the cursors.
• Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (treble)
terminal and the subwoofer (bass) terminal.
• Use speakers supporting bi-amping only. For
details, refer to the speakers' instruction manual.
Bi-Amping
It is possible to connect speakers supporting bi-amping to
improve quality of the bass and treble. Up to 5.1 ch will be
played in bi-amping.
Connecting a Power Amplifier
You can connect a power amplifier to the unit and use the
unit as a pre-amplifier in order to produce a large volume
that cannot be output with the unit only. Connect the
speakers to the power amplifier. For details, refer to the
power amplifier's instruction manual.
„„
Connections
„„
Connections
1. Connect as below using the FRONT terminals and
BACK or HEIGHT terminals.
Power amplifier
• Set the unconnected channels to "None" in "Speaker
Configuration".
– After pressing RCV, press Home on the remote
controller. Select "Setup" with the cursors and press
Enter. Then select "2.Speaker Setup" - "Speaker
Configuration" and set the unconnected channels to
"None".
Tweeter (treble)
Subwoofer (bass)
Front R
Front L
2. Turn the unit on and set "Speaker Setup" to "Bi-Amp".
1After pressing RCV, press Home on the remote
controller.
48
Connecting and Operating Onkyo RI Components
Connecting and Operating
Onkyo RI Components
RI Connection and Setting
About RI Function
• The remote indicator stays lit.
• The RCV, Zone2, and TV buttons cannot be
programmed.
L
Connecting an Onkyo component with RI jack such as the
separately sold RI Dock to the unit by using an RI cable
and an analog audio (RCA) cable enables the following RI
functions:
R
2. With the number buttons, enter the following 5-digit
System On/Auto Power On: Starting playback on a
component connected via RI when the unit is on standby
mode, automatically turns on the unit to select the relevant
component as its input source.
Direct Change: When playback is started on a component
connected via RI, the unit selects that component as the
input source.
Remote Controller Operation: Allows you to operate RIcompatible Onkyo components using the AV receiver's
remote controller. Point the remote controller at remote
control sensor of the unit. This operation is possible only
when the RI remote control code is programmed.
• Some components may not support all RI functions.
• These functions do not work when Zone 2 is turned on.
• For information on the RI functions, also refer to each
component's instruction manual.
Connect an Onkyo component with RI jack to this unit using
an RI cable and an analog audio (RCA) cable. For details,
refer to the instruction manual of the component with RI
jack. The RI cable can be connected in any order. When
there are two RI jacks, both jacks work in the same way
and are interchangeable.
To connect the RI Dock or cassette tape deck via RI, you
must:
„„
Rename the input selector
To make the RI functions work, you must rename the input
selectors on the unit. Press TV/CD or Game to display
"TV/CD" or "GAME" on the main unit display. Then press
and hold TV/CD or Game 3 seconds or more to switch the
display to "DOCK" or "TAPE".
„„
Program the RI remote control code
Program the remote control code to any Remote Mode
button on the remote controller. This will allow you to
operate the component by pointing the remote controller at
the unit instead of the component.
remote control code within 30 seconds.
RI Dock: 81993
Cassette tape deck with RI jack: 42157
• Programming is complete when the remote indicator
flashes twice. The remote indicator flashes once
slowly when programming the remote control code
fails. Try programming again.
Input selector on the RI Dock: Select "HDD" or "HDD/
DOC". For details, refer to the RI Dock's instruction manual.
To operate Onkyo components directly or Onkyo
components that are not connected via RI, use the
following remote control codes:
Onkyo DVD player: 30627
Onkyo CD player: 71817
RI Dock: 82990
• With some models, operation may be not possible in
part or not possible at all.
1. Press Display for 3 or more seconds while holding down
the Remote Mode button to which you want to program
the remote control code.
49
Connecting and Operating Onkyo RI Components
iPod/iPhone Operation
The RI Dock allows you to use the AV receiver's remote
controller to operate and play music on your iPod/iPhone.
Moreover, it also allows you to view videos on your iPod/
iPhone on the screen of your TV, as well as perform RI
operations if connected via RI. This operation is possible
only when the RI remote control code is programmed.
Before Performing any Operation: Before performing
any operation on your iPod/iPhone, make sure to have
it updated to the latest version via iTunes. Certain
buttons may not work for some iPod/iPhone models and
generations, or RI Dock. For details on the operation, refer
to the RI Dock's instruction manual.
6
8
7
6 Top Menu 7 / / / , Enter, Playlist /
8 Menu
9
G
F
Switch the remote controller mode by pressing the Remote
Mode button programmed with the remote control code for
the iPod/iPhone, and operate by using the corresponding
buttons. Point the remote controller at the unit.
2
1
3
4
5
1 Remote Mode
2 Source
3 Muting
4 VOL /
5 Album +/-
50
H
, , ,
,
9 F Repeat, Random
G Mode
H Display
,
,
• Pressing Display turns on the backlight for a few
seconds.
• Mode allows you to use the Resume function to resume
playing from the song that was playing when you
removed your iPod/iPhone from the DS-A2 RI Dock.
Control Function between the Unit and External Component
Control Function between the Unit
and External Component
You can enable the control functions between the unit
and external devices using the terminals below. Special
devices or cable connections are necessary to enable the
functions. For more information about preparation, contact
the specialized stores.
„„
IR jack
If you use a multiroom remote control kit such as Xantech
and Niles with this jack, you can operate the unit with the
remote controller even when you are in a separate room, or
operate the unit with the remote controller even if its remote
control sensor is difficult to see. You can also connect
a device with the unit and operate it with the remote
controller. For more information about adopting a multiroom
remote control kit, contact the specialized stores.
„„
RS232 port
Use the port for connection with a commercially available
integrated control system that can enable home
automation. Some integrated control systems provide a
centralized operation with a single touch panel controller
in order to control audio and video home appliances
and security devices together. For more information
about adopting an integrated control system, contact the
specialized stores.
IR
receiver
Connecting
block
Remote controller
Main room
Zone
Signal flow
„„
12V trigger output jack
You can enable power link operation when you connect
the unit and an external device such as power amplifier
equipped with 12V trigger input jack. When the desired
input is selected on the unit, power link operation will be
activated with a control signal of maximum 12 V/150 mA
output from the 12V trigger output jack. Each input can
be set to output a control signal in any case of "Main
(playback in the main room)", "Zone2 (playback in Zone 2)"
or "Main/Zone2 (playback in the main room/Zone 2)". For
connection, use a monaural mini plug cable.
51
Firmware Update
Updating the Firmware via Network
Firmware Update
About Firmware Update
There are two methods for updating the firmware: via
network and via USB.
Use the one that best suits your environment.
• For the latest information on updates, visit the Integra
website.
• Before updating, make sure that the speaker setup
microphone is not connected.
• During an update, do not
– Disconnect and reconnect any cable, USB storage
device, speaker setup microphone or headphones,
or perform any operation on the component such as
turn off its power
– Access to this unit from a PC or smartphone using
Android application
• The update may take about 20 minutes to complete for
either method: via network or via USB.
Furthermore, existing settings are guaranteed
regardless of the method used for update.
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own
risk.
Onkyo will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online
documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will Onkyo be liable to you or any third party for
any special, indirect, incidental, or consequential damages
of any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
52
Before Start:
• Check that the unit is turned on, and the connection to
the Internet is secured.
• Turn off the controller component (PC etc.) connected to
the network.
• Stop any playing Internet radio, USB storage device, or
server content.
• If the multi-zone function is active, press Off on the main
unit to turn it off.
• If "HDMI CEC (RIHD)" is set to "On", set it to "Off"
(default value).
– After pressing RCV, press Home on the remote
controller. Select "Setup" with the cursors and press
Enter. Then, after selecting "7.Hardware Setup"
- "HDMI" and pressing Enter, select "HDMI CEC
(RIHD)" to select "Off".
¼¼
The description may differ from the on-screen display but that will not
change the way to operate or the function.
„„
Update
1. Press RCV and then press Home on the remote
controller.
The Home menu is displayed on the TV screen.
HOME
Setup
2. With the cursors, select "Setup" - "7.Hardware Setup" "Firmware Update" - "Update via NET", and then press
Enter.
• If "7.Hardware Setup" is grayed out and cannot be
selected, wait for a while until it starts up.
• You will not be able to select "Update via NET" if
there is nothing to update.
3. Press Enter with "Update" selected to start update.
• During the update, the TV screen may go black
depending on the updated program. In that case,
check the progress on the display of the unit. The TV
screen will remain black until the update is complete
and the power is turned on again.
• "Completed!" is displayed when the update is
complete.
4. Press On/Standby on the main unit to turn the unit
into standby mode. The process is completed and your
firmware is updated to the latest version.
• Do not use Receiver on the remote controller.
Firmware Update
„„
If an Error Message is Displayed
Updating the Firmware via USB
Case 1: When an error occurs, "- Error!" is appeared
on the display of the unit. ("" represents an alphanumeric
character.) Check the following:
Before Start:
Error Code
• -01, -10:
Ethernet cable not found. Connect the Ethernet cable
properly.
• -02, -03, -04, -05, -06, -11, -13, -14,
-16, -17, -18, -20, -21:
Internet connection error. Check the following:
– Whether the router is turned on
– Whether this unit and router are connected to the
network
Try to disconnect and then connect again the power
to the unit and router. This may solve the problem. If
you are still unable to connect to the Internet, the DNS
server or proxy server may be temporarily down. Check
the service status with your ISP provider.
• Others:
disconnect then reconnect the AC power cord, from the
beginning.
• Prepare a 64 MB or larger USB storage device.
– Media inserted in a USB card reader may not be used for this
function.
– USB storage devices with security function are not
supported.
– USB hubs and USB devices with hub function are not
supported. Do not connect these devices to the unit.
• Delete any data stored on the USB storage device.
• Turn off the controller component (PC etc.) connected to the
network.
• Stop any playing Internet radio, USB storage device, or server
content.
• If the multi-zone function is active, press Off on the main unit to
turn it off.
• If "HDMI CEC (RIHD)" is set to "On", set it to "Off" (default
value).
– After pressing RCV, press Home on the remote controller.
Select "Setup" with the cursors and press Enter. Then, after
selecting "7.Hardware Setup" - "HDMI" and pressing Enter,
select "HDMI CEC (RIHD)" to select "Off".
¼¼
Some USB storage devices may take long to load, may not be loaded
correctly, or may not be correctly fed depending on the device or their
content.
¼¼
Onkyo will not be liable whatsoever for any loss or damage of data, or
storage failure arising from the use of the USB storage device with this
AV receiver. Thank you for your understanding.
¼¼
The description may differ from the on-screen display but that will not
change the way to operate or the function.
4. Press USB on the remote controller to select "USB".
5. Connect the USB storage device to the USB port of the
main unit.
• If you connect a USB hard disk drive to the USB
port of the unit, we recommend that you use its AC
adapter to power it.
• If the USB storage device has been partitioned, each
section will be treated as an independent device.
6. Press RCV and then press Home on the remote
controller.
„„
Update
1. Connect the USB storage device to your PC.
2. Download the firmware file from the Integra website to
your PC and unzip.
Firmware files are named in the following way:
ONKAVR_.zip
Unzip the file on your PC. The number of unzipped files
and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of
the USB storage device.
• Make sure to copy the unzipped files.
53
Firmware Update
The Home menu is displayed on the TV screen.
Case 1: When an error occurs, "- Error!" is appeared
on the display of the unit. ("" represents an alphanumeric
character.) Check the following:
HOME
Setup
7. With the cursors, select "Setup" - "7.Hardware Setup" "Firmware Update" - "Update via USB", and then press
Enter.
• If "7.Hardware Setup" is grayed out and cannot be
selected, wait for a while until it starts up.
• You will not be able to select "Update via USB" if
there is nothing to update.
8. Press Enter with "Update" selected to start update.
• During the update, the TV screen may go black
depending on the updated program. In that case,
check the progress on the display of the unit. The TV
screen will remain black until the update is complete
and the power is turned on again.
• During the update, do not turn off, or disconnect then
reconnect the USB storage device.
• "Completed!" is displayed when the update is
complete.
9. Disconnect the USB storage device from the unit.
10.Press On/Standby on the main unit to turn the unit
into standby mode. The process is completed and your
firmware is updated to the latest version.
• Do not use Receiver on the remote controller.
54
„„
If an Error Message is Displayed
Error Code
• -01, -10:
USB storage device not found. Check whether the USB
storage device or USB cable is correctly inserted to the
USB port of the main unit.
Connect the USB storage device to an external power
source if it has its own power supply.
• -05, -13, -20, -21:
The firmware file is not present in the root folder of the
USB storage device, or the firmware file is for another
model. Retry from the download of the firmware file.
• Others:
disconnect then reconnect the AC power cord, from the
beginning.
Troubleshooting
„„
How to reset the remote controller
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off
or disconnecting/connecting the power cord, which is easier
than working on the connection, setting and operating
procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or
audio is not output or the HDMI linked operation does not
work, disconnecting/connecting the HDMI cable may solve
it. When reconnecting, be careful not to wind the HDMI
cable since if wound the HDMI cable may not fit well. After
reconnecting, turn off and on the unit and the connected
device.
Resetting the unit
Resetting the unit to the status at the time of shipment may
solve the problem. If the measures above do not solve the
problem, reset the unit with the following procedure. If you
reset the unit status, your preferences will be reset to the
defaults. Note them down before starting reset.
„„
How to reset
1. While holding down CBL/SAT on the main unit (note
that step 2 must be performed with this button pressed
down)
2. Press On/Standby on the unit. "Clear" is appeared on
the display and the unit will enter standby mode.
C l e ar
2
1
1. While holding down 1RCV on the remote controller
(note that step 2 must be performed with this button
pressed down)
2. Press and hold down 2 Home until the 3 remote
indicator stays lit (about 3 seconds). Within 30 seconds,
press 1RCV again.
1
3
2
Power
„„
Cannot turn on the unit
• Make sure that the power cord is properly plugged into
the wall outlet.
• Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
„„
The unit turns off unexpectedly
• The unit will automatically enter standby mode when
Auto Standby has been set and launches.
„„
The unit turns off and after restoring the power, it
turns off again
• The protection circuit has been activated. Remove
the power cord from the wall outlet immediately. Make
sure that all speaker cables and input sources are
properly connected, and leave the unit with its power
cord disconnected for 1 hour. After that, reconnect the
power cord and turn the power on. If the unit turns off
again, avoid resetting it and unplug the power cord. Then
contact your dealer.
Caution: If "CHECK SP WIRE" appears on the display, the
speaker cables may be short-circuited.
WARNING: If smoke, smell or abnormal noise is produced
by the unit, unplug the power cord from the wall outlet
immediately and contact the dealer or Integra Support.
Audio
„„
There is no sound, or it is very quiet
• Make sure that the proper input source is selected.
• Make sure that connecting plugs are pushed in all the
way.
• Make sure that the inputs and outputs of all components
are connected properly.
• Make sure that the polarity of the speaker cables is
correct, and that no bare wires are in contact with the
metal part of speaker terminals.
• Make sure that the input source is properly selected.
• Make sure that the speaker cables are not shorting.
• Check the volume. The volume level is adjustable
between Min, 1 to 79, Max (80) It is normal that the unit
volume level is set up to 40 or around.
• If the MUTING indicator on the display flashes, press
Muting on the remote controller to unmute the unit.
• While headphones are connected to the PHONES jack,
no sound is output from the speakers.
• If there is no sound from a BD/DVD player connected to
an HDMI IN, check the BD/DVD player’s output settings,
and be sure to select a supported audio format.
• Check the digital audio output setting on the connected
component. On some game consoles, such as those
that support DVD, the default setting is off.
• With some DVD-Video discs, you need to select an
audio output format from a menu.
• If your turntable uses an MC cartridge, you must
connect an MC head amp, or an MC transformer.
• Make sure that none of the connecting cables are bent,
twisted, or damaged.
• Not all listening modes use all speakers.
• Specify the speaker distances and adjust the individual
speaker levels.
• Make sure that the speaker setup microphone is not still
connected.
• If the input signal format is set to "PCM" or "DTS", set it
to "Off".
„„
Only the front speakers produce sound
• When the Stereo or Mono listening mode is selected,
only the front speakers and subwoofer produce sound.
• Make sure the speakers are configured correctly.
55
Troubleshooting
„„
Only the center speaker produces sound
• If you use the Dolby Pro Logic II listening mode with
a mono source, such as an AM radio station or mono
TV program, the sound is concentrated in the center
speaker.
• Make sure the speakers are configured correctly.
„„
The surround speakers produce no sound
• When the T-D (Theater-Dimensional), Stereo or Mono
listening mode is selected, the surround speakers
produce no sound.
• Depending on the source and current listening mode,
not much sound may be produced by the surround
speakers. Try selecting another listening mode.
• Make sure the speakers are configured correctly.
„„
The center speaker produces no sound
• When the Stereo or Mono listening mode is selected,
the center speaker produces no sound.
• Make sure the speakers are configured correctly.
„„
The subwoofer produces no sound
• When you play source material that contains no
information in the LFE channel, the subwoofer produces
no sound.
• Make sure the speakers are configured correctly.
„„
There is no sound with a certain signal format
• When listening to Dolby Digital and/or DTS sound,
digital connection is necessary.
• Check the digital input terminal setting. If the connection
is different from the default, re-setting is necessary.
• Check the digital audio output setting on the connected
component. On some game consoles, such as those
that support DVD, the default setting is off.
„„
Cannot select a desired listening mode
• Depending on the connecting status of the speaker,
some listening modes may not be selected. Check the
details in "Using the Listening Modes" section.
„„
Cannot play 5.1ch
• Make sure the speakers are configured correctly.
• Not all listening modes use all speakers.
„„
Cannot get 6.1/7.1 playback
• 6.1/7.1 playback is not possible if surround back
speakers and height speakers are not connected.
56
• Depending on the number of connected speakers, it is
not always possible to select all of the listening modes.
„„
The speaker volume cannot be set as required
• Check to see if a maximum volume has been set.
„„
Noise can be heard
• Using cable ties to bundle analog audio (RCA) cables
with power cords, speaker cables, etc. may degrade the
audio performance, so refrain from doing it.
• An analog audio (RCA) cable may be picking up
interference. Try repositioning your cables.
„„
The Late Night function does not work
• Make sure the source material is Dolby Digital, Dolby
Digital Plus, or Dolby TrueHD.
„„
About DTS signals
• When DTS program material ends and the DTS
bitstream stops, the unit remains in DTS listening mode
and the dts indicator remains on. This is to prevent noise
when you use the pause, fast forward, or fast reverse
function on your player. If you switch your player from
DTS to PCM, you may not hear any sound because the
unit does not switch formats immediately. In such case,
you should stop your player for about 3 seconds and
then resume playback.
• With some CD and LD players, you will not be able
to playback DTS material properly even though your
player is connected to a digital input on the unit. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency response
changed) and the unit does not recognize it as a
genuine DTS signal. In such cases, you may hear noise.
• Playing DTS program material, using the pause, fast
forward, or fast reverse function on your player may
produce a short audible noise. This is not a malfunction.
„„
The beginning of audio received by an HDMI IN
cannot be heard
• Since it takes longer to identify the format of an HDMI
signal than it does for other digital audio signals, audio
output may not start immediately.
Video
„„
There is no picture
• Make sure that all video connecting plugs are pushed in
all the way.
• Make sure that each video component is properly
connected.
• If the TV is connected to the HDMI OUT jack of the unit,
set "Monitor Out" to "MAIN" or "SUB" according to the
output jack. If the playback source is connected to the
video (composite) jack or component video jacks and
you want to output the video to the TV via the HDMI
OUT jack, set "HDMI Input" to "-----".
• If the video source is connected to a component video
input, you must assign that input to an input selector,
and your TV must be connected to COMPONENT
VIDEO OUT terminal.
• If the video source is connected to a composite video
input, your TV must be connected to the MONITOR OUT
V terminal.
• If the video source is connected to an HDMI input, you
must assign that input to an input selector, and your TV
must be connected to the HDMI output(s).
• Make sure the switching of input screens is proper at the
monitor side such as a TV.
• When the image input from the composite video input
terminal does not get displayed, make sure that the
component video input terminal is not set to the selected
input. If selected, images input from the composite video
input terminal cannot be output to this input switching. If
only composite video input terminal connection is used,
set the component video input terminal to "----- ."
• Images of a component connected to the composite
video input terminal cannot be output by converting on
the monitor of a TV or other components connected to
COMPONENT VIDEO OUT terminal.
• If the input selector to which the input from the TV
connected to the HDMI OUT SUB jack is connected
is changed on this unit when "Monitor Out" is set to
"MAIN+SUB", or "MAIN" and when outputting to Zone
2, the video from the TV connected to HDMI OUT MAIN
stops displaying.
• "Resolution" is effective only for the HDMI OUT MAIN
jack if "Monitor Out" is set to "MAIN+SUB".
Troubleshooting
„„
There is no picture from a source connected to an
HDMI IN
• Reliable operation with an HDMI-to-DVI adapter is not
guaranteed. In addition, video signals from a PC are not
supported.
• Check if "Resolution Error" is displayed on the main
unit display when video input via HDMI IN jack is not
displayed. In this case, the TV does not support the
resolution of the video input from the player. Change the
setting on the player.
„„
The on-screen menus do not appear
• On your TV, make sure that the video input to which this
unit is connected is selected.
• Set "On Screen Display" to "On" in "OSD Setup".
• When the unit is not connected to a TV via HDMI OUT
MAIN jack, the setting screen and on-screen menus are
displayed only on the connected TV or monitor display.
Tuner
„„
Reception is noisy, FM stereo reception is noisy, or
the FM STEREO indicator does not light
• Re-check the antenna connection.
• Relocate your antenna.
• Move the unit away from your TV or PC.
• Passing cars and airplanes can cause interference.
• Concrete walls weaken radio signals.
• Listen to the station in mono.
• When listening to an AM station, operating the remote
controller may cause noise.
• If nothing improves the reception, install an outdoor
antenna.
Remote Controller
„„
The remote controller does not work
• Before operating this unit using remote controller, be
sure to press RCV.
• Make sure that the batteries are installed with the
correct polarity.
• Install new batteries. Do not mix different types of
batteries, or old and new batteries.
• Make sure that the remote controller is not too far away
•
•
•
•
•
•
from the unit, and that there is no obstruction between
the remote controller and the remote control sensor of
the unit.
Make sure that the unit is not subjected to direct
sunshine or inverter-type fluorescent lights. Relocate if
necessary.
If the unit is installed in a rack or cabinet with coloredglass doors or if the doors are closed, the remote
controller may not work reliably.
Make sure you have selected the correct remote
controller mode.
When using the remote controller to control other
manufacturers’ AV components, some buttons may not
work as expected.
Make sure you have entered the correct remote control
code.
Make sure to set the same ID on both the unit and
remote controller.
„„
Operating other Onkyo component by using a RI
remote control code is not available
• Make sure that the Onkyo component is properly
connected with RI cable. When RI cable is used for
connection, make sure to connect analog audio (RCA)
cable as well. (Connecting only an RI cable will not be
enough.)
• Make sure you have selected the correct remote
controller mode.
• Make sure that the input display is correctly set.
• Input the RI remote control code again.
• When the RI remote control code is input, point the
remote controller at remote control sensor of the unit.
„„
Cannot operate Integra/Onkyo components (ones
without RI connection) and components of other
makers
• Make sure that the connection with other components is
correct.
• Input a correct remote control code again. If there are
several codes, try each code.
• Make sure that the remote controller mode is correctly
selected.
• Operate the remote controller by setting toward the light
receiving section of each component.
• Some components may not start the operation.
RI Dock for iPod/iPhone
„„
There is no sound
• Make sure your iPod/iPhone is actually playing.
• Make sure your iPod/iPhone is properly inserted in the
Dock.
• Make sure the unit is turned on, the correct input source
is selected, and the volume is turned up.
• Make sure the plugs are pushed in all the way.
• Try resetting your iPod/iPhone.
„„
There is no video
• Make sure that your iPod/iPhone model’s TV OUT
setting is set to On.
• Make sure the correct input is selected on your TV or the
unit.
• Some versions of the iPod/iPhone do not output video.
„„
The AV receiver’s remote controller does not control
my iPod/iPhone
• Make sure your iPod/iPhone is properly inserted in the
Dock. If your iPod/iPhone is in a case, it may not connect
properly to the Dock. Always remove your iPod/iPhone
from the case before inserting it into the Dock.
• The iPod/iPhone cannot be operated while it is
displaying the Apple logo.
• Make sure you have selected the correct remote
controller mode.
• When you use the AV receiver’s remote controller, point
it toward this unit.
• Before operating with the remote controller, you may
need to play on your iPod/iPhone to make the input
selector be recognized.
• Try resetting your iPod/iPhone.
• Depending on your iPod/iPhone model and generation,
some buttons may not work as expected.
„„
The unit unexpectedly selects my iPod/iPhone as the
input source
• Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
57
Troubleshooting
„„
iPod/iPhone does not work properly
• Try reconnecting your iPod/iPhone.
Multi-zone Function
„„
There is no sound
• With multi-zone function, sound is output only when the
signal input source is an external component connected
to the analog audio input jacks of the unit, "NET", "USB"
or "BLUETOOTH". Multi-zone playback is not possible
if the player and the unit are connected via HDMI cable
or digital cable. Connect the RCA audio output jacks of
the player and the analog audio input jacks of the unit
with analog audio (RCA) cable. Also analog audio output
setting may be necessary on the player.
Wi-Fi (Wireless LAN) Network
„„
Cannot access to Wi-Fi (Wireless LAN) network or
sound playback is interrupted and communication
does not work
• Try plugging/unplugging the power supply of wireless
LAN router and the unit, check the wireless LAN router
power-on status, and try reboot of the wireless LAN
router.
• The setting of SSID and encryption (WEP, etc.) is not
correct. Make sure the network settings of the unit is
properly set.
• Connection to an SSID that includes multi-byte
characters is not supported. Name the SSID of the
wireless LAN router using single-byte alphanumeric
characters only and try again.
• Cannot receive radio wave due to a bad connection.
Shorten the distance from wireless LAN access point
or remove obstacles for a good visibility, and try again.
Place the unit away from microwave ovens or other
access points. 2.4 GHz band for wireless LAN may not
be enough. Connect ETHERNET terminal of the unit
and the router via an Ethernet cable after selecting
"7.Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off(Wired)".
58
• Place the unit away from the components emitting
electromagnetic waves on the 2.4 GHz band (microwave
ovens, game consoles, etc.). If this does not solve the
problem, stop using other components which emit
electromagnetic waves.
• When other wireless LAN devices are used near the
unit, several issues such as interrupted playback and
communication may occur. You can avoid these issues
by changing the channel of your wireless LAN router. For
instructions on changing channels, see the instruction
manual provided with your wireless LAN router.
• If there is a metallic object near the unit, wireless LAN
connection may not be possible as the metal can effect
on the radio wave.
• If there is more than one access point in the network,
separate each access point.
• It is recommended to place the Wi-Fi router (access
point) and the unit in the same room.
„„
The connection does not complete even when the
automatic setting button is pressed on the wireless
LAN router
• The wireless LAN router setting may be switched to
Manual. Return the setting to Auto.
• Try the manual set-up. The connection may succeed.
„„
On the list of SSID on the TV menu screen, there is
no corresponding SSID
• When the wireless LAN router setting is at stealth mode
(mode to hide the SSID key) or when ANY connection is
off, the SSID is not displayed. Change the setting and try
again.
Bluetooth
„„
Music playback is unavailable on the unit even after
successful Bluetooth connection
• Depending on the characteristics or specifications of
your Bluetooth-enabled device, playback on the unit is
not guaranteed.
• When the audio volume of your Bluetooth-enabled
device is set low, the playback of audio may be
unavailable. Volume up the Bluetooth-enabled device.
• Depending on the Bluetooth-enabled device, Send/
Receive selector switch may be provided. Select Send
mode.
• Even when a music file is playing on the Bluetoothenabled device, the sound cannot be played if the
connection is not established with the unit. Make sure
that the unit is connected (this unit is selected as the
sound output destination).
„„
Sound is interrupted
• Problem may be occurring at the Bluetooth-enabled
device. Check the information on a web page.
„„
The audio quality is poor after connection with a
Bluetooth-enabled device
• The Bluetooth reception is poor. Move the Bluetoothenabled device closer to the unit or remove any obstacle
between the Bluetooth-enabled device and this unit.
„„
Cannot connect with this unit
• Try plugging/unplugging the power of the unit and try
turning on/off the Bluetooth-enabled device. Re-startup
of the Bluetooth-enabled device may be effective.
• The Bluetooth-enabled device does not support the
profiles required for this unit.
• The Bluetooth function of the Bluetooth-enabled
device is not enabled. Refer to the user manual of the
Bluetooth-enabled device for how to enable the function.
• Near components such as microwave oven or cordless
phone, which use the radio wave in the 2.4 GHz range,
a radio wave interference may occur, which disables the
use of this unit.
„„
Bluetooth connection cannot be built
• When building a Bluetooth connection between this unit
and your Bluetooth-enabled device for the first time,
if the connection fails, select "7.Hardware Setup" - "
Bluetooth", execute "Clear" in "Pairing Information", turn
off and then on again your Bluetooth-enabled device to
clear the device name, and build the connection again.
• If there is a metallic object near the unit, Bluetooth
connection may not be possible as the metal can effect
on the radio wave.
• If the wireless LAN and Bluetooth connections are used
at the same time, try to connect the ETHERNET port of
the unit and router with the Ethernet cable after selecting
"7.Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off(Wired)" for a better connection.
Troubleshooting
„„
The Auto Reconnect function of Bluetooth does not
work
• This may not work with some Bluetooth-enabled
devices. In that case, pair the unit and the Bluetoothenabled device and then play again
NET/USB Function
„„
Cannot access the network server
• When NET is blinking, the AV receiver is not properly
connected to the home network.
• Make sure your network server has been started up.
• Make sure your network server is properly connected to
the home network.
• Make sure your network server is correctly set.
• Make sure that the router LAN side port is properly
connected to the AV receiver.
• Make sure that the correct IP address is allocated in
"7.Hardware Setup" - "Network".
„„
Playback stops while listening to music files on the
network server
• Make sure the network server is compatible with this
unit.
• When the PC is serving as the network server, try
quitting any application software other than the server
software (Windows Media Player 12 etc.).
• If the PC is downloading or copying large files, the
playback may be interrupted.
„„
Cannot access the Internet radio
• Certain network service or contents available through
the unit may not be accessible in case the service
provider terminates its service.
• If a specific radio station is unavailable for listening,
make sure the registered URL is correct, or whether the
format distributed from the radio station is supported by
the AV receiver.
• When NET is blinking, the AV receiver is not properly
connected to the home network.
• Make sure that your modem and router are properly
connected, and make sure they are both turned on.
• Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait
for a while, and then turn on the components again.
• Make sure that the router LAN side port is properly
connected to the AV receiver.
• Make sure that the correct IP address is allocated in
"7.Hardware Setup" - "Network" on the unit.
• Depending on ISP, setting the proxy server is necessary.
• Make sure that the used router and/or modem is
supported by your ISP.
„„
Cannot connect to the AV receiver from a Web
browser
• Make sure that the IP address of the AV receiver is
correctly input to the Internet browser.
• When DHCP is used for allocating the IP address, the IP
address of this AV receiver may have been changed.
• Make sure that both AV receiver and PC are properly
connected to the network.
„„
USB storage device is not displayed
• Make sure that USB storage device and USB cable are
securely plugged to the USB port of this AV receiver.
• Remove the USB storage device from the AV receiver
once, and then try re-connecting.
• Performance of the hard disk that receives power from
the USB port of the unit is not guaranteed.
• Depending on the type of format, the playback may not
be performed normally. Check the type of the file formats
that is supported.
• USB storage device with security functions may not be
played.
Others
„„
Power consumption in standby mode
• In the following cases, the power consumption in
standby mode may reach up to a maximum of 5 W:
– When "Network Standby" in "7.Hardware Setup" "Network" is set to "On".
– When "HDMI CEC (RIHD)" is set to "On". (Depending
on the TV status, the AV receiver will enter normal
standby mode.)
– The "HDMI Through" setting is set to other than "Off".
– When "Wakeup via Bluetooth" in "7.Hardware Setup"
- "Bluetooth" is set to "On".
• The power consumption in standby mode may be larger
than the value above while the MHL (Mobile Highdefinition Link) enabled mobile device connected to the
AUX Input HDMI/MHL jack is being charged.
„„
The sound changes when I connect my headphones
• When a listening mode other than Direct or Mono is
selected, connecting a headphone automatically selects
Stereo.
„„
How do I change the language of a multiplex source
• Select "Main" or "Sub" for "Multiplex Input Channel" in
"3.Audio Adjust" -"Multiplex/Mono".
„„
The RI functions do not work
• To use RI, you must make an RI connection and an
analog audio (RCA) connection between the component
and AV receiver, even if they are connected digitally.
• While Zone 2 is selected, the RI functions do not work.
„„
The functions System On/Auto Power On and Direct
Change do not work for components connected via RI
• These functions do not work when Zone 2 is turned on.
„„
When performing Automatic Speaker Setup, the
measurement fails and the message "Ambient noise is
too high." is displayed.
• This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
„„
The display is dark
• Make sure that Dimmer function is not working. Press
DIMMER button and change the brightness level of the
display.
„„
The following settings can be made for the
composite video inputs
• While holding down the input selector button to
configure, press Home once at a time until "Video ATT:
On" appears on the display. To resume the setup, repeat
the above described step until "Video ATT: Off" appears
on the display.
This setting is possible for input selectors assigned
with one of the video inputs "VIDEO 1" to "VIDEO 3" in
"1.Input/Output Assign" - "Composite Video Input". If you
have a game console connected to the composite video
input, and the picture is not very clear, you can attenuate
the gain.
Video ATT: Off: (Default).
Video ATT: On: (Gain is reduced by 2 dB.)
59
Troubleshooting
„„
The picture on your TV/monitor connected to the
HDMI output(s) is unstable
• Try turning the DeepColor function off.
• To turn off the DeepColor function, press STB/DVR and
On/Standby on the AV receiver simultaneously.
While holding down STB/DVR, press On/Standby
several times until "Deep Color: Off" appears on the
display. To reactivate the DeepColor function, repeat the
above described step until "Deep Color: On" appears on
the display.
Radio Wave Caution
The AV receiver uses a 2.4 GHz radio wave
frequency, which is a band used by other wireless
systems as 1 and 2 described below.
1. Devices which use a 2.4 GHz radio wave frequency
• Cordless phones
• Cordless facsimiles
• Microwave ovens
• Wireless LAN devices (IEEE802.11b/g/n)
• Wireless AV equipment
• Wireless controllers for game systems
• Microwave oven-based health aids
• Video transmitter
• Specific type of external monitor and LCD display
2. Less common devices which use a 2.4 GHz radio wave
frequency
• Anti-theft systems
• Amateur radio stations (HAM)
• Warehouse logistic management systems
• Discrimination systems for train or emergency
vehicles
If these devices and the AV receiver are used at the same
time, the audio may be undesirably stopped or disturbed
due to a radio wave interference.
Suggestions for improvement
• Switch off the devices which emit the radio wave.
• Place the interfering devices away from the AV
receiver.
• The AV receiver uses radio wave, and a third person can
receive the wave on purpose or accidentally. Do not use
the communication for important or fatal matters.
• We assume no responsibility whatsoever for any error
or damage of network environment or access device
60
resulting from the use of this apparatus.
Confirm with the provider or access device maker for
more information.
Scope of Operation
Use of the AV receiver is limited to home use.
(Transmission distances may be reduced depending on
communication environment.)
In the following locations, poor condition or inability to
receive radio waves may cause the audio to be interrupted
or stopped:
• In reinforced concrete buildings or steel framed or iron
framed buildings.
• Near large metallic furniture.
• In a crowd of people or near a building or obstacle.
• In a location exposed to the magnetic field, static
electricity or radio wave interference from radio
communication equipment using the same frequency
band (2.4 GHz) as the AV receiver, such as a 2.4 GHz
wireless LAN device (IEEE802.11b/g/n) or microwave
oven.
• If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave oven is placed near your AV receiver, you
may experience radio wave interference. If this occurs,
move your AV receiver to a different place.
When the microwave oven is not in use, there will be no
radio wave interference.
Radio Wave Reflections
The radio waves received by the AV receiver include the
radio wave coming directly from the devices and waves
coming from various directions due to reflections by walls,
furniture and building (reflected waves). The reflected
waves (due to obstacles and reflecting objects) further
produce a variety of reflected waves as well as variation
in reception condition depending on locations. If the audio
cannot be received properly due to this phenomenon, try
moving the location of the wireless LAN device a little.
Also note that audio may be interrupted due to the reflected
waves when a person crosses or approaches the space
between the AV receiver and the wireless LAN device.
• We assume no responsibility whatsoever for any
damages resulting from the use of this apparatus except
in the cases deemed acceptable under the applicable
laws and regulations.
• Operation in all environment is not guaranteed for
wireless LAN. The communication may not be possible
or have desirable communication speed.
Precautions
• Do not use this apparatus near an electronic device
handling high-accuracy controls or weak signals. Doing
so may cause an accident due to a malfunction of the
device.
• Do not use this apparatus in use prohibited location
such as an aircraft equipment or a hospital. Doing so
may cause an accident due to a malfunction of an
electronic device or an electro-medical apparatus. Follow
the instructions of the medical facilities.
„„
Electronic device which requires cautions
Hearing aid, pace maker, other medical electronic devices,
fire alarm, automatic door, and other automatic control
device.
When using a pace maker or other medical electronic
devices, confirm with the medical electronic device maker
or dealer for the effect of the radio wave.
The AV receiver contains a microPC for signal processing
and control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet,
wait at least 5 seconds, and then plug it back in.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit’s
malfunction.
Before you record important data, make sure that the
material will be recorded correctly.
Before disconnecting the power cord from the wall outlet,
set the AV receiver to standby.
Troubleshooting
Regarding the Video Resolution
See below the video signal types and resolutions that the
unit can output when it receives the input signals of the
following types and resolutions. The supported resolutions
are shown as "Input: Output".
(North American model)
„„
HDMI: HDMI
4K: 4K (1/3)
1080p/24: 4K, 1080p/24 (1)
2560×1080p: 4K (2), 2560×1080p (1)
1680×720p: 4K (2), 2560×1080p, 1680×720p (1)
1080p: 4K (3), 2560×1080p, 1080p (1)
1080i: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i
(1)
720p: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p (1)
480p: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p, 480p (1)
480i: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p, 480p, 480i (1)
„„
HDMI: Component
Can not be output.
„„
HDMI: Composite
Can not be output.
„„
Component: HDMI
1080p: 1080p (1)
1080i: 1080i (1)
720p: 720p (1)
480p: 480p (1)
480i: 480i (1)
„„
Composite: HDMI
480i: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p, 480p, 480i (1)
„„
Composite: Composite
480i: 480i (1)
1 Resolution supported by HDMI OUT SUB jack
2 Supported resolution: [3840×2160 24/30/60 Hz]
3 Supported resolution: [3840×2160 24/30/60 Hz], [4096×2160
24/30/60 Hz]
(Australian model)
„„
HDMI: HDMI
4K: 4K (1/3)
1080p/24: 4K, 1080p/24 (1)
2560×1080p: 4K (2), 2560×1080p (1)
1680×720p: 4K (2), 2560×1080p, 1680×720p (1)
1080p: 4K (3), 2560×1080p, 1080p (1)
1080i: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i
(1)
720p: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p (1)
576p: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p, 480p/576p (1)
576i: 4K (3), 2560×1080p, 1680×720p, 1080p, 1080i,
720p, 480p/576p, 480i/576i (1)
„„
HDMI: Component
Can not be output.
„„
HDMI: Composite
Can not be output.
„„
Component: HDMI
480i/576i: 4K (3), 2560×1080p, 1680×720p, 1080p,
1080i, 720p, 480p/576p, 480i/576i (1)
„„
Component: Component
1080p: 1080p (1)
1080i: 1080i (1)
720p: 720p (1)
480p/576p: 480p/576p (1)
480i/576i: 480i/576i (1)
„„
Composite: HDMI
480i/576i: 4K (3), 2560×1080p, 1680×720p, 1080p,
1080i, 720p, 480p/576p, 480i/576i (1)
„„
Composite: Composite
480i/576i: 480i/576i (1)
1
2
3
Resolution supported by HDMI OUT SUB jack
Supported resolution: [3840×2160 24/25/30/50/60 Hz]
Supported resolution: [3840×2160 24/25/30/50/60 Hz], [4096×2160
24/25/30/50/60 Hz].
61
Reference Information
Reference Information
Linked Operation with CEC-compatible
Components
The AV receiver is compatible with the following
components (as of January 2014).
TV (Random order):
• Toshiba TV sets
• Sharp TV sets
Players/Recorders (Random order):
• Onkyo and Integra RIHD-compatible players
• Toshiba players and recorders
• Sharp players and recorders (only when used together
with Sharp TV sets)
Models other than those mentioned above may have some
interoperability if compatible with CEC, which is part of the
HDMI Standard, but operation cannot be guaranteed.
Note: For RI functions to work properly, do not connect more RIHDcompatible components than the quantities specified below, to
the HDMI jack. RI functions are not guaranteed when more RIHDcompatible components than the below mentioned quantities are
connected. Furthermore, do not connect the AV receiver to another
AV receiver/AV amplifier via HDMI.
• Blu-ray Disc/DVD players: up to 3.
• Blu-ray Disc/DVD recorders: up to 3.
• Cable TV tuner, terrestrial digital tuner, and satellite broadcasting
tuner: up to 4 units.
62
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power
of the connected components is turned off automatically
with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/
recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder,
and verify the following:
• The AV receiver automatically turns on, and selects the
input to which the Blu-ray Disc/DVD player/recorder is
connected.
• The TV automatically turns on, and selects the input
to which the AV receiver is connected.
5. Following the operating instructions of the TV, select
"Use the TV speakers" from the menu screen of the TV,
and confirm that the audio is output from the speakers of
the TV, and not from the speakers connected to the AV
receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and confirm
that the audio is output from the speakers connected to
the AV receiver, and not from the TV speakers.
Note:
• Even if you set to output audio on the TV speakers, audio will
be output from the speakers connected to the AV receiver when
you adjust the volume or switch the input on the AV receiver.
To output audio from the TV speakers, redo the corresponding
operations on the TV.
• In case of an RIHD connection with RI and RI audio control
compatible components, do not connect the RI cable at the
same time.
• On the TV, when you select anything other than the HDMI jack to
which the AV receiver is connected, the input on the AV receiver
will be switched to "TV/CD".
• The AV receiver will automatically power on in conjunction
when it determines it to be necessary. Even if the AV receiver
is connected to an RIHD compatible TV or player/recorder, it
will not power on if it is not necessary. It may not power on in
conjunction when the TV is set to output audio from the TV.
• Linked system functions with the AV receiver may not work
depending on the component model connected. In such cases,
operate the AV receiver directly.
• When the player/recorder cannot be operated with the remote
controller of the AV receiver, the corresponding component may
not be programmed to support the remote controller operation of
CEC. Program the remote control code of the component maker
to the remote controller for using.
About HDMI
HDMI (High Definition Multimedia Interface) is a digital
interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video
components. Until now, several separate video and audio
cables have been required to connect AV components. With
HDMI, a single cable can carry control signals and digital
audio of digital video (2-channel PCM, multichannel digital
audio, and multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible
with DVI (Digital Visual Interface) (1), so TVs and displays
with a DVI input can be connected by using an HDMI-toDVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
This unit supports HDCP (High-bandwidth Digital Content
Protection) (2), so it can display picture only on HDCPcompatible components.
HDMI of the unit supports the following functions.
Audio Return Channel, 3D, x.v.Color, DeepColor, Lip Sync,
4K (Passthrough), DTS-HD Master Audio, DTS-HD High
Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD
and Multichannel PCM.
Audio Formats Supported by The Unit:
• 2-channel linear PCM (32 - 192 kHz, 16/20/24 bit)
• Multichannel linear PCM (up to 7.1 ch, 32 - 192 kHz,
16/20/24 bit)
• Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD
Master Audio)
Your Blu-ray Disc/DVD player must also support HDMI
output of the above audio formats.
Reference Information
About Copyright Protection:
The unit supports Revision 1.4 and Revision 2.2 (HDMI
OUT MAIN and HDMI IN3 only) of the HDCP (Highbandwidth Digital Content Protection) (2), a copyprotection system for digital video signals. Other devices
connected to the unit must also support HDCP.
1 DVI (Digital Visual Interface): The digital display interface standard set
by the DDWG (3) in 1999.
2 HDCP (High-bandwidth Digital Content Protection): The video
encryption technology developed by Intel for HDMI/DVI. It is designed
to protect video content and requires a HDCP-compatible HDMI/DVI
receiver to display the encrypted video.
3 DDWG (Digital Display Working Group): Lead by Intel, Compaq,
Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open
industry group’s objective is to address the industry’s requirements for
a digital connectivity specification for high-performance PC and digital
displays.
Note:
• There are some content that can be played only with HDCP Rev.
2.2 compatible devices. To play such content, connect an HDCP
Rev.2.2 compatible TV or player to the HDMI OUT MAIN jack or
HDMI IN3 jack of the unit.
• The HDMI video stream (i.e., video signal) is compatible with
DVI (Digital Visual Interface), so TVs and displays with a DVI
input can be connected by using an HDMI-to-DVI adapter cable.
(Note that DVI connections only carry video, so you will need
to make a separate connection for audio.) However, reliable
operation with such an adapter is not guaranteed. In addition,
video signals from a PC are not supported.
• The HDMI audio signal (sampling rate, bit length, etc.) may be
restricted by the connected source component. If the picture
is poor or there is no sound from a component connected via
HDMI, check its setup. Refer to the connected component’s
instruction manual for details.
Home network (LAN)
The connection of several components via cables enabling
the mutual communication is called a network.
At households, many families create (generally, the term
"build" is used) a network to connect PC and gaming
machines to the Internet and to exchange data between
PC.
The network established in a relatively narrow area such as
one household is called a LAN (Local Area Network).
In this manual, a term "home network" (network for a
family) is used instead of "LAN," so this LAN becomes
more familiar.
By connecting this unit with the network server such as a
PC, playing music files in the network server (in the PC) is
possible. Moreover, by connecting to the Internet, listening
to the Internet radio is also possible.
This unit, PC, and Internet are not directly connected.
When connecting with a PC and/or Internet, several
components (network components) are necessary.
Components necessary for establishing a home
network (LAN):
Components necessary for the home network (LAN) for
using the NET function of this unit are as follows.
„„
Router
A router is a device that controls information (data) flow
between the unit, PC, and the Internet.
As a network term, the flow of information (data) is called
"traffic". The router has a role to control the information flow
as the traffic control, between connected components.
• A router with a built-in 100Base-TX switch is
recommended.
• In addition, if your router has the DHCP function,
facilitating the network setting becomes possible.
• Some routers have a built-in modem, and some Internet
Service Providers (ISP) require you to use specific
routers.
Please consult your ISP or PC dealer if you are unsure.
„„
CAT5 Ethernet cable
The Ethernet cable is a cable that actually connects
components that comprise the network. There are straight
type and cross type Ethernet cables.
• Use a shielded CAT5 Ethernet cable (straight-type) to
connect the unit to your home network.
Consult your cable store for details of Ethernet cable.
„„
Network server
(When PC etc./network server is used)
Component that stores music files and provides the unit
with those files at the time of playback.
• Requirements for use with this unit depend on the
component that is used as a network server.
• Conditions for pleasant playback of music files on
the unit depend on the using network server (PC
performance). See instruction manuals of using
components.
„„
Modem (when Internet radio is used)
Device that connects home network (LAN) and Internet.
There are many kinds of modems depending on the forms
of Internet connection.
In addition, when connecting to the Internet, it is required
to conclude an agreement with a company that provides
Internet connection service, called ISP (Internet Service
Provider).
Use a modem that is recommended by your ISP company
for the Internet connection.
There are some devices that have both router and modem
functions.
Within above network components, prepare a router,
Ethernet cable, and network server when the NET function
"network server" is used.
For enjoying the NET function "Internet radio," it is
necessary to use the router, Ethernet cable, and modem
(and agreement with ISP).
63
Reference Information
Server Requirements
„„
Server playback
This unit can play digital music files stored on a PC or
media server and supports the following technologies:
• Windows Media Player 11
• Windows Media Player 12
• DLNA-certified media server
The network server must be connected to the same
network as this unit.
Up to 20,000 folders can be displayed, and folders may be
nested up to 16 levels deep.
Note: Depending on the media server, the unit may not recognize it,
or may not be able to play its music files.
„„
Remote playback
Remote playback is the function that enables this unit to
play music files saved in different components by operating
the DLNA-compliant controller component and PC in the
home network.
• Windows Media Player 12
• DLNA-certified (within DLNA Interoperability Guidelines
version 1.5) media server or controller component.
¼¼
The setting varies depending on the media server or controller
components. Refer to your components’ instruction manual for details.
If the operating system of your personal PC is Windows 8/
Windows 7, Windows Media Player 12 is already installed.
For more information, see the Microsoft web site.
USB Storage Device Requirements
• USB mass storage device class (but not always
guaranteed).
• FAT16 or FAT32 file system format.
• If the USB storage device has been partitioned, each
section will be treated as an independent device.
• Up to 20,000 folders can be displayed, and folders may
be nested up to 16 levels deep.
• USB hubs and USB storage devices with hub functions
are not supported. Do not connect these devices to the
unit.
64
Note:
• If the media you connect is not supported, the message "No
Storage" will be displayed.
• Sound files that are protected by copyright cannot be played.
• When the USB audio player and this unit are connected, the
audio player screen and the screen of the unit may be different.
In addition, control functions of the audio player (classifying and
sorting music files and adding information, etc.) are not available
on this unit.
• Do not connect a PC to the USB port of the unit. Inputting sound
to the USB port of the unit from a PC is not possible.
• Media inserted to the USB card reader may not be available in
this function.
• Some USB storage devices and its contents may require some
time to be read.
• Depending on the USB storage device, proper reading of the
contents and proper supply of the power supply may not be
possible.
• Onkyo accepts no responsibility whatsoever for the loss or
damage to data stored on a USB storage device when that
device is used with this unit. We recommend that you back up
your important music files beforehand.
• Performance of the hard disk that receive power from the USB
port of the unit is not guaranteed.
• If you connect a USB hard disk drive to the USB port of the unit,
we recommend that you use its AC adapter to power it.
• When an audio player that are operated with batteries is used,
make sure that the batteries have enough remaining power.
• USB storage devices with security functions cannot be played.
Supported Audio Formats
• For server playback and playback from a USB storage
device, this unit supports the following music file formats.
• Music files of the following formats that can be played
depend on the network server. For example, when using
Windows Media Player 12, not all music files in the PC
can be played. The music files that can be played are the
ones registered to the Windows Media Player 12 library.
• Variable bit-rate (VBR) files are supported. However,
playback times may not be displayed correctly.
• This unit supports the gapless playback of the USB
storage device in the following conditions.
When WAV, FLAC and Apple Lossless files are
continuously played back with the same format,
sampling frequency, channels and quantization bit rate.
• Remote playback does not support the gapless
playback.
Note:
• With remote playback, this unit does not support the following
music file formats:
−− FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
„„
MP3 (.mp3 or .MP3)
• Supported formats: MPEG-1/MPEG-2 Audio Layer 3
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and
VBR
„„
WMA (.wma or .WMA)
WMA stands for Windows Media Audio and is an audio
compression technology developed by Microsoft
Corporation. Audio can be encoded in WMA format by
using Windows Media® Player.
• WMA files must have the copyright option turned off.
• Supported sampling rates: 8 kHz, 11.025 kHz, 16 kHz,
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
• Supported bitrates: Between 5 kbps and 320 kbps, and
VBR
• WMA Pro/Voice formats are not supported.
„„
WMA Lossless (.wma or .WMA)
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz
• Quantization bit: 16 bit, 24 bit
„„
WAV (.wav or .WAV)
WAV files contain uncompressed PCM digital audio.
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
¼¼
For playback from a USB storage device, sampling rates of 176.4 kHz
and 192 kHz are not supported.
Reference Information
„„
AAC
(.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP or
.3G2)
• Supported formats: MPEG-2/MPEG-4 Audio
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and
VBR
„„
FLAC (.flac or .FLAC)
FLAC is a file format for lossless audio data
compression.
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
„„
Ogg Vorbis (.ogg or .OGG)
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• Supported bitrates: Between 48 kbps and 500 kbps, and
VBR
• Incompatible files cannot be played.
„„
LPCM (Linear PCM)
• Supported sampling rates: 44 kHz, 48 kHz
• Quantization bit: 16 bit
¼¼
Only for playback via DLNA.
„„
Apple Lossless (.m4a/.mp4/.M4A/.MP4)
• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz
• Quantization bit: 16 bit, 24 bit
„„
DSD (.dsf or .DSF)
• Supported sampling rates: 2.8224 MHz
„„
Dolby TrueHD (.vr/.mlp/.VR/.MLP)
• Supported sampling rates: 48 kHz, 64 kHz, 88.2 kHz,
96 kHz, 176.4 kHz, 192 kHz
¼¼
For playback from a USB storage device, only sampling rates of 48 kHz
and 64 kHz are supported.
65
Reference Information
Remote Control Code List
■■Television (A to E)
A.R. Systems
Accent
Acoustic Solutions
Action
Addison
AEG
Aiko
Aim
Akai
Akiba
Akito
Akura
Alba
Alien
Allstar
Amstrad
Anam
Andersson
Anitech
Ansonic
AOC
Apex Digital
Ardem
Arena
Ario
Aristona
ART
Art Mito
66
10037, 10556
10037
11667, 11585,
11037
10650
10653, 11150
11037
10037
10037
10037, 12676,
10208, 10714,
10556, 12414,
13183, 10178
10037
10037
10037, 10714,
11667, 11585,
10171, 11037
11037, 12676,
10037, 10714,
11585
11037
10037
10037, 10171,
11037
10037, 10650
11585, 12676
10037
10037
11365, 12769,
10178, 10625,
11150
12397
10714, 10037
10037
12397
10556, 10037
11037
11585
Asberg
Astra
ATD
Atlantic
Audiosonic
Audioworld
Autovox
Aventura
Axxon
Baird
Barco
Base
Basic Line
Baur
Beaumark
Beijing
Beko
Bell & Howell
Belson
Belstar
Beon
Berthen
Bestar
Bexa
BGH
Black Diamond
Blaupunkt
Blue Sky
BPL
Brandt
Brinkmann
Brionvega
Britania
Bush
10037
10037
10698
10037
10714, 10037
10698
12676
10171
10714
10208
10556
10698
10037, 11037,
10556
10037, 10195
10178
10208
10714, 10037
10017
10698
11037
10037
10556
10037
12493
12414
11037
10195
10714, 10037,
11037, 10556,
10625
10208, 10037
10625, 11585,
10714
10037
10037
12414
11037, 10037,
10714, 12676,
11667, 10208,
10556, 10698,
11585
Byd:sign
Camper
Carad
Carena
Carrefour
Cascade
Casio
Cathay
CCE
Celcus
Celebrity
Centrum
Centurion
Changhong
Chimei
Chun Yun
Chung Hsin
Clarivox
Clatronic
Clayton
Coby
Commercial Solutions
Condor
Conrowa
Contec
Cosmel
CPTEC
Crown
Crypton
Curtis
Cyberpix
D-Vision
Daewoo
Dansai
Dantax
Datsura
Dawa
12209
10037
11037
10037
10037
10037
10037
10037
13782, 10037
12676, 11585
10000
11037
10037
13434, 12769,
10508
12769
10000, 11150
11150
10037
10037, 10714
11037
13478
11447
10037
10698
10037
10037
10625
10037, 10714,
10208, 11037
11667
12397
11667
10037, 10556
10037, 10556,
10178, 11150
10037, 10208
11037, 10714,
12676
10208
10037
Daytron
De Graaf
Decca
Denver
Desmet
Diamant
Diamond
Digatron
Digihome
Digiline
Digisonic
Digitor
Dixi
Drean
DSE
Dual
Dumont
Durabrand
Dux
DX Antenna
Dynatron
Dynex
E.S.C.
ECE
Elbe
Electroband
Electrograph
Elektra
Elfunk
ELG
Elin
Elite
Emerson
Envision
Epson
Erres
10037
10208
10037
10037
10037
10037
10698
10037
11667, 12676
10037
11826
10698, 10037
10037
10037
10698
11667, 10037,
11037, 11585,
12676, 10714
10017
10171, 10178,
10714, 11037
10037
13817
10037
12049
10037
10037
10037, 10556
10000
11755
10017
11037
10037
10037
10037
11864, 10171,
11394, 10178,
10037, 10714
11365, 11506
11379
10037
Reference Information
ESA
Euroman
Europa
Europhon
Evesham Technology
Excello
Exquisit
10171
10037
10037
10037
11667
11037
10037
Genesis
Genexxa
GFM
Gibralter
Gibson
Gintai
Godrej
GoGen
GoldStar
12676
11585
10625, 11037,
10037, 10195,
11585, 12676
10037, 10171
10208
11667, 10714,
12676, 10037,
10556
10714, 10037,
11037, 10208,
10556
10208
10037
10037
10037
11636
10037
11826
10809
10809
13817, 10171,
11394, 11037,
10714
11037
10037
10037
11755
11447, 10178,
10625, 11454
10037
Goodmans
■■Television (F to J)
F&U
FairTec
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Formenti
Fraba
Freesat
Friac
Frigidaire
Fujitsu
Fujitsu Siemens
Funai
Gaba
Galaxi
Galaxis
Gateway
GE
GEC
Gorenje
Gradiente
Graetz
Granada
Grandin
Grundig
H-Buster
Haier
Hallmark
Hankook
Hannspree
Hanseatic
Hantarex
Hantor
Harwood
Hauppauge
HB
HCM
Heran
Herosonic
Highline
Hinari
HiPlus
10037
10037
10171, 11864
10017
11826
11150
11585
12676
10178, 10037,
10714, 11150
10037, 11037,
11667, 10714,
11585, 10556,
10625, 12676
11585, 12676
10037
10714
10208, 10037
10037, 10714,
11037, 10556
10195, 11223,
10556, 10037,
11667, 12676
13620
13620, 10698,
10037, 10508
10178
10178
11826
10037, 10714,
10625, 10556
10037
10037
10037
10037
10714
10037
11826
11826
10037
10037, 10208
11826
Hisawa
Hisense
Hitachi
Hitachi Fujian
Hitec
Hoher
Hornyphon
Hua Tun
Hypson
Hyundai
Iberia
ICE
iLo
Imperial
Indiana
Inno Hit
Innova
Insignia
Integra
Inteq
Interbuy
Interfunk
Internal
Intervision
Irradio
IRT
Isis
Isukai
ITS
ITT
ITT Nokia
ITV
10714
10556, 10508,
10208
11643, 12676,
11576, 11585,
11691, 11037,
11667, 10037,
10150, 10178,
10508, 11150,
12170
10150
10698
10714
10037
11150
10037, 10714,
10556, 11037
10698, 12676,
11037
10037
10037
11394
10037
10037
11037, 11585
10037
12049, 10171
11807, 13100,
13500
10017
10037
10037
10556
10037
10037
10698
12676
10037
10037
12676, 10208
10208
10037
JCB
Jinfeng
Jinxing
JMB
Jubilee
JVC
10000
10208
10037, 10556,
10698
12676, 10556
10556
11774, 10653,
11601, 12271,
11428, 10508,
10650, 12676
■■Television (K to N)
Kaisui
Karcher
Kathrein
Kendo
Kennex
Kioto
Kiton
KLL
Kneissel
Kolin
Kolster
Konka
Konnig
Korpel
Kosmos
Kunlun
Kupperbusch
L&S Electronic
Lavis
Lecson
Lenco
Leyco
10037
10714
10556
11037, 11585,
12676, 10037
11037
10556
10037
10037
10037, 10556
10150, 10037,
11150, 11755
10037
10037, 10714
10037
10037
10037
10208
12676
10714
11037
10037
10037, 11037
10037
67
Reference Information
LG
LiesenKotter
Lifetec
Linetech
Linsar
Local India Brand
Local Malaysia Brand
Lodos
Loewe
Logik
Luma
Lumatron
Lumenio
Lux May
Luxor
LXI
Madison
Magnavox
Magnum
Manesth
Manhattan
Marantz
Mark
Mastro
Masuda
Matsui
Matsushita
68
11840, 11860,
11423, 12731,
12182, 12358,
12362, 10178,
12424, 10037,
10714, 10017,
10556, 10698
10037
10037, 11037,
10714
12676
12676, 11667,
11585
10208
10698
11037
10633
11037, 10698,
11585
11037
10037
10037
10037
11037, 12676,
10208
10178
10037
12372, 11454,
11506, 10171,
11365, 11755,
11867
10714, 10037
10037
10037, 11037
10037, 10556
10037, 10714
10698
10037
10037, 10195,
10208, 11037,
10714, 10556,
11667, 12676
10650
Maxent
Maxess
Meck
Mediator
Medion
Megatron
MEI
Melectronic
Memorex
Mercury
Mermaid
Metronic
Metz
MGA
Micromaxx
Midland
Mikomi
Minato
Minerva
Ministry Of Sound
Minoka
Mitsubishi
Moree
Morgan's
Moserbaer
MTlogic
Mudan
Multitec
Multitech
Myryad
NAD
Naiko
11755
12493
10698
10037, 10556
10714, 10037,
11037, 12676,
11667, 10556,
10698, 11585
10178
11037
10037, 10195,
10714
10178, 10150,
11037
10037
10037
10625
11037, 10195
10150, 10178
10037, 10714,
11037
10017
11585, 11667
10037
10195
11667
10037
10150, 11250,
12313, 10178,
10037, 10556,
11150, 11037,
11171
10037
10037
11585
10714
10208
11037, 10037
10037
10556
10037, 10178
10037
Nakimura
National
NEC
Neckermann
NEI
Neoka
Netsat
NetTV
Neufunk
Nevir
New Sonic
New Tech
Newave
Nikkai
Nikkei
Nikko
Nokia
Norcent
Nordmende
Normerel
Novatronic
Novita
NPG
10037
10208, 10508
12461, 10178,
10508, 10653,
11150
10037, 10556
10037, 11037
11826
10037
11755
10556, 10714,
10037
12676
11826
10037, 10556
10178, 11150
10037
10714
10178
10208
11365
10195, 11585,
10037, 10714,
11667
10037
10037
11585
13434
■■Television (O to S)
Oceanic
OK Line
OK.
Okano
OKI
Omni
Onei
Onida
Onimax
Onix
10208
11037
13434, 12676
10037
11667, 12676,
13434, 11585
10698
11667
10653, 12414
10714
10698
Onkyo
Onn
Opera
Optimus
Orava
Orbit
Orion
Orline
Ormond
Osaki
Osio
Osume
Otto Versand
Pacific
Palladium
Palsonic
Panama
Panasonic
Panavideo
Panavision
Panda
Penney
Perdio
Perfekt
Philco
11807, 13100,
13500
11667
10037, 10714
10650
11037
10037
10037, 10556,
10714, 11037,
12676
10037
11037
10037, 10556
10037
10037
10037, 10556,
10195
10714, 11037,
10556
10037, 10714,
10556
12461, 10698,
10037
10037
11636, 11291,
11480, 11650,
10650, 13825,
12170, 10037,
10208, 10508
13825
10037
10208, 10508,
10698
10178
10037
10037
13426, 12414,
10037, 10178
Reference Information
Philips
Phocus
Phoenix
Phonola
Pioneer
PJ
Plantron
Playsonic
Polaroid
Powerpoint
Prima
Prinston
Pro Vision
Profitronic
Proline
Proscan
Prosonic
Protech
Proton
Pulsar
Pye
Qingdao
Quadro
Quasar
Quelle
R-Line
Radiola
Radiomarelli
10037, 12800,
10556, 11887,
11867, 11506,
12372, 12680,
11454, 10171,
11365, 10017,
10000, 10178,
11394
10714
10037
10037, 10556
11457, 10037,
10698, 11636,
12171
11506
10037
10714, 10037
12676, 11826
10037, 10698
12461
11037
10037, 10556,
10714
10037
10625, 10037,
11037, 12676
11447
10714, 12676,
10037, 11585,
11667
10037, 11037
10178
10017
10037, 10556
10208
11667
11291, 10650
10037, 11037,
10195
10037
10037, 10556
10037
RadioShack
Radiotone
RCA
Realistic
Recor
Rectiligne
Red Star
Reflex
Relisys
Relon
Remotec
Reoc
Revox
RFT
Roadstar
Rowa
Runco
Saba
Sagem
Saivod
Salora
Sampo
Samsung
Sansui
Sanyo
SBR
10037, 10178
10037, 11037
11447, 12746,
10625, 12434,
12932, 12187,
10000, 10178,
10618, 11454,
13426
10178
10037
10037
10037
10037, 11037
11585
11826
10037, 10171
10714
10037
10037
11037, 10037,
10714
10698, 10037
10017
10625, 10714,
12676
10618
11037, 10037
10208
11755, 10171,
10178, 10650
12051, 11632,
10618, 10037,
10556, 10178,
10208, 11150
10037, 10714
10208, 11142,
11585, 12676,
12461, 11974,
12769, 10508,
11037, 11150,
11365, 11667
10037, 10556
Schaub Lorenz
Schneider
Schontech
Scotch
Scott
Sears
Seelver
SEG
SEI
Sei-Sinudyne
Semp Toshiba
Sencor
Senzu
Serie Dorada
Shanghai
Sharp
Sheng Chia
Shintoshi
Shivaki
Siam
Siemens
Siera
Silva
Silva Schneider
SilverCrest
Sinudyne
SKY
Skyworth
Solavox
Soniko
Soniq
Sonitron
Sonneclair
Sonoko
10714, 12676,
11667
10037, 10556,
10714, 11037,
11585, 12676
11037
10178
10178
10171, 10178
11037
11037, 10037,
13434
10037
10037
13793
10714
12493
10178
10208
11659, 12360,
10818, 11393,
12676, 10650,
11165, 11423
11150
10037
10178, 10037
10037
10195, 10037
10556, 10037
10037
10037
12676, 11037
10037
10037
12769, 10037,
10698
10037
10037
12493
10208
10037
10037
Sonolor
Sontec
Sony
Soundesign
Soundwave
Sowa
Soyea
Soyo
Squareview
SR Standard
Starlite
STI
Strato
Sunny
Sunstar
Sunstech
Sunwood
Supersonic
SuperTech
Supra
Supreme
Svasa
Sylvania
Symphonic
Synco
Sysline
10208
10037
12778, 11825,
10810, 10000,
11651, 11505,
11167
10178
10037, 11037
10178, 11150
10698
11826
10171
10037, 11037
10037
13793
10037
10037
10037
12676
10037
10208
10037, 10556
10178
10000
10208
10171, 11864,
11394
10171, 11394
11755, 10000,
10178, 11826
10037
69
Reference Information
■■Television (T to Z)
Tacico
Tai Yi
Talent
Tashiko
Tatung
TCL
TCM
Teac
Tec
Tech Line
Technica
Technics
Technika
TechniSat
Technisson
Techno
Technosonic
Techwood
Tecnimagen
Teco
Tedelex
Teknika
TELE System
Telecor
Telefunken
Telefusion
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleview
70
10178, 11150
11150
10178
10650, 11150
10037, 11150
12434, 13183,
13426, 12414,
10698
10714
10037, 11037,
10698, 10714,
11755, 10171,
10178
10037
10037, 11585
11037
10556, 10650
11667, 12676
10556
10714
11585
10556, 10625
11667, 11037,
12676
10556
10178, 10653
10208
10150
11585
10037
10625, 12676,
12414, 10698,
11585, 10037,
10714, 11667
10037
10037
10037
10037
10037, 10556
10037, 11037
10037
Tennessee
Tensai
Terris
Tesla
Tevion
Thomson
Thorn
TMK
TNCi
Tokai
Tokaido
Topline
Toshiba
TRANS-continents
Transonic
Triad
Triumph
TVTEXT 95
Uher
Ultravox
Unic Line
Uniden
United
Universal
Universum
Univox
V7 Videoseven
Vestel
10037
10037, 11037
11667
11037, 10037,
10556, 10714
10714, 11037,
10037, 10556,
11585, 11667
10625, 11447,
10037
10037
10178
10017
10037, 11037
11037
11037
11508, 11524,
11656, 12676,
10508, 13570,
10650, 11037,
10195, 10618,
11150, 11169
10037, 10556,
11037
10037, 10698
10556
10037, 10556
10556
10037
10037
10037
12122, 12676,
11667
10714, 11037,
10037, 10556
10037, 10714
10037, 11037,
10195, 10618
10037
11755
11037, 10037,
11585, 11667
Vexa
Victor
Videocon
VideoSystem
Vidtech
Viewsonic
Vision
VIZIO
Vortec
Voxson
VU
Walker
Waltham
Wards
Watson
Wega
Welltech
Weltstar
Westinghouse
Westwood
Wharfedale
White Westinghouse
Wilson
Windsor
Windy Sam
Wintel
Wyse
Xiahua
Xiron
XLogic
Xoceco
Xrypton
Yamaha
10037
11428, 10650,
10653
10508, 10037
10037
10178
11755, 12049,
11365
11826, 10037
11758, 13758,
12209
10037
10037, 10178,
11667
11365
12676, 11667,
11585
10037, 11037
10017, 10000,
10178
11037, 10037,
10714
10037
10714
11037
11712, 11826,
11755, 12397
11585
11667, 10037,
10556
10037
10556
11037
10556
10714
11365
10698
11037
10698
10037, 12461
10037
11576, 10650
Yamishi
Yokan
Yoko
YU-MA-TU
Zenith
Zepto
Zonda
10037
10037
10037
10037
10017, 10178,
11423, 12731,
11365, 12358,
12362
11585
10698
■■TV DVD Combination
Akai
Alba
Black Diamond
Blue Sky
Bush
Centrum
Crown
Dual
Dynex
Elfunk
Emerson
Ferguson
Funai
Goodmans
Grandin
Grundig
Hitachi
Insignia
JVC
LG
Linsar
Logik
Luxor
Magnavox
12676, 32966
12676, 32966
11037, 30713
11037, 30713
12676, 10698,
11037, 30713,
32966
11037, 30713
11037, 30713
11037, 30713
12049
11037, 30713
11864, 11394,
30675
11037, 30713
11394, 30675
11037, 12676,
30713, 32966
30713
30539
12676, 11037,
30713, 32966
12049
12271, 11774
11423
12676, 32966
11037, 30713
11037, 30713
12372
Reference Information
Matsui
Medion
Mitsubishi
OK.
OKI
Orava
Panasonic
Philips
Polaroid
Powerpoint
Prosonic
RCA
Samsung
Sanyo
SEG
Sharp
Soniq
Sony
Sylvania
Teac
Technica
Telefunken
Teletech
Thomson
Toshiba
United
Universum
Vestel
Viewsonic
Weltstar
Westinghouse
Xiron
11037, 12676,
30713
12676, 32966
34004
13434
12676, 32966
11037, 30713
12170
10556, 11454,
11394, 12372,
30539
12676, 32966
10698
12676, 32966
12187, 12746,
12932, 11447
12051
12676
11037, 30713
10818, 12360,
12676, 32966
12493
12778
11864, 11394,
10171, 30675,
30630
10698
11037, 30713
10698
11037, 30713
10625, 30551
11524, 12676,
32966
11037, 30713
30713
11037
12049
11037, 30713
11712
11037, 30713
■■DVD
3D LAB
Accurian
Acoustic Solutions
AEG
Aiwa
Akai
Akura
Alba
Amitech
Amstrad
AMW
Ansonic
Aristona
ASDA
Audix
Autovox
Awa
Axion
Basic Line
Bel Canto Design
Belson
Best Buy
Black Diamond
Blu:sens
Blue Parade
Blue Sky
Brainwave
Brandt
Bush
Byd:sign
CCE
Celcus
Centrum
Changhong
Cinea
30539
30675
30730, 30713
30675, 30770,
31233
30533
32966, 31233,
30675, 30770
31233
32966, 30713,
30730, 30539
30770
30713, 30770,
32139
30872
30831
30539, 30646
32213
30713
30713
30730, 30872
30730
30713
31571
32139
32139
30713
31233
30571
30713
30770
30551, 30503
30713, 30730,
30831, 32966
30872
30730
32966
30713, 30675
30627
30831
Cineral
Cinetec
Classic
Clatronic
Clayton
Coby
Codex
Continental Edison
Craig
Crown
Cybercom
Daenyx
Daewoo
Dansai
Dantax
Datsun
Daytek
Dayton Audio
DCE
Decca
Denon
Dewo
Digihome
DigiLogic
DiK
Disney
DK Digital
Dragon
DSE
Dual
Durabrand
Dynex
E:max
ECC
Elfunk
Elin
30730
30713, 30872
30730
30675, 31233
30713
30730
31233
30831, 30872
30831
30713, 30770
30831
30872
30770, 30872
30770
30713, 30539,
32966
31233
30872
30872
30831
30770
31634, 32258,
32748, 30490,
33851
31634
30713, 32966
30713
30831
30675, 30831
30831
30831
30675
30831, 30713,
30730, 32966
30675, 30713,
30831
32596
30770, 31233
30730
30713
30770
Elite
Elta
Eltax
Emerson
EuroLine
Ferguson
Finlux
Firstline
Funai
G-Hanz
G-HanzS
GE
GFM
Go Video
GoldStar
Goodmans
GPX
Gran Prix
Grandin
Grundig
Grunkel
GVG
H&B
Hanseatic
Harman/Kardon
HE
Hello Kitty
Henss
Hitachi
Hoher
Home Electronics
Humax
HYD
Hyundai
Inno Hit
Insignia
32854
30770, 31233
31233
30675, 32213
30675, 31233
30713, 32966
32966, 30770,
30741
30713
30675
32213
32213
30522
30675
31044, 30741
30741
30713, 30730,
32966
30741
30831
30713, 31233
30539, 30551,
30713, 32966
30770, 30831
30770
30713, 31233
30741
30582
30730
30831
30713
32966, 30573,
30713, 31664
30713, 30831
30730, 30770
30646
31233
32966
30713
32596, 30675,
30741
71
Reference Information
Integra
Irradio
ITT
JDB
JMB
JVC
Kansas Technologies
Kendo
Kennex
Kenwood
Kiiro
Kupperbusch
Leiker
Lenco
Lexicon
LG
Lifetec
Linetech
Linsar
Lodos
Loewe
Logik
Lumatron
Lunatron
Luxman
Luxor
Magnavox
Manhattan
Marantz
Mark
Marquant
Matsui
Maxim
72
32147, 30627,
31769, 30503,
31612, 30571,
31634
31233, 30646
31233
30730
32966
30623, 31602,
30503, 30539,
32966
31233
30713, 30831
30713, 30770
30490
30770
32966
30872
30713, 30770
32545
30741, 31602,
31233
30831
32966
32966
30713
30741, 30539
30713
30713, 30741
30741
30573
30713, 32966
30675, 30503,
30646, 30539,
31354, 30713
30713
30539, 32414,
33444
30713
30770
30713, 32966
30713, 30872
MBO
MDS
Mecotek
Medion
Memorex
Metz
Micromedia
Micromega
Microsoft
Microstar
Minax
Minoka
Mitsubishi
Mizuda
Mustek
Mystral
NAD
Naiko
NEC
Nevir
Nisato
Noblex
Norcent
Nordmende
OK.
OKI
Onkyo
Oppo
Orava
Orbit
Orion
Ormond
Pacific
Packard Bell
Palladium
30730
30713
30770
30831, 32966,
30741, 30630
30831, 32213
30713, 30571
30503, 30539
30539
31708, 32083,
30522
30831
30713
30770
34004, 30713
30770
30730
30831
30741
30770
30741, 31602
30831, 30770
31233
31233
30872
30831
32966
32966
30627, 32147,
31612, 31769,
30503, 30571,
31634
32545, 30575
30713
30872
30713, 31233
30713
30831, 30713
30831
30713
Panasonic
Philco
Philips
Pioneer
Polaroid
Polk Audio
Portland
Powerpoint
Presidian
Prinz
Prism
Pro Vision
Proline
Proscan
Proson
Prosonic
Pye
Radionette
Radiotone
RCA
REC
Red
Red Star
Richmond
Roadstar
Ronin
Rotel
Rowa
Saba
Saivod
Salora
30490, 31579,
31641, 32710,
33641, 33862,
32523
30675
32056, 30539,
31354, 32789,
32434, 30646,
31340, 30503,
30675, 32084
31571, 30631,
30571, 32442,
32854, 30142
32966
30539
30770
30872
30675
30831
30831
30730
32966
30522
30713
32966
30539, 30646
30741
30713
30522, 32213,
30571, 31769
30490
32213
30770
31233
30713, 30730
30872
30623
30872
30551
30831
30741
Samsung
Sanyo
ScanMagic
Schaub Lorenz
Schneider
Schontech
Scott
SEG
Semp
Semp Toshiba
Sharp
Sherwood
Shinsonic
Sigmatek
Silva Schneider
Skantic
Skymaster
SM Electronic
Smart
Sonashi
Soniq
Sony
Sound Color
Soundwave
Spectra
SR Standard
Strong
Sunkai
Sunstech
30199, 30573,
33195, 31635,
32369, 32489,
32329, 30490,
31044
32966, 30713,
31233
30730
30770
30539, 30831,
30646, 30713
30713
31233
30713, 30872
30503
30503
30630, 32250,
30713, 32966,
30675
30741, 30770
30533
32139
30831, 30741
30713, 30539
30730
30730
30713
30831
30831
31633, 31516,
30533, 31033,
31070, 30864,
32861, 31536,
32180
31233
30713
30872
30831
30713
30770
30831, 32139,
32966
Reference Information
Supratech
Sylvania
Symphonic
Sytech
Tandberg
Targa
Tascam
Tatung
TBoston
Tchibo
TCM
Teac
Technica
Technics
Technika
Technosonic
Techwood
Telefunken
Teletech
Tensai
Theta Digital
Thomson
Tokai
Toshiba
TRANS-continents
Transonic
Trevi
TVE
United
Universum
Urban Concepts
Venturer
Vestel
VIZIO
32139
30675, 30630
30675
30831
30713
30741
31818
30770
32139
30741
30741
30571, 30675,
30741, 31818,
32139, 34004
30713
30490
30770, 30831
30730
30713, 32966
30551, 32966
30713
30770
30571
30551, 30522,
30831
31233
30503, 32705,
32277, 31769,
33157, 32966,
32551
30831, 30872,
31233
30730
30831
30713
30713, 30675,
30730, 31233
30713, 30741
30503
31769
30713
32563
Voxson
Waitec
Walker
Waltham
Welkin
Wellington
Weltstar
Wharfedale
Wilson
Windsor
Windy Sam
Woxter
X-View
Xbox
Xiron
XMS
Yamada
Yamaha
Yamakawa
Yukai
Zenith
30831, 30730
30730, 31233
32966
30713
30831
30713
30713
30713
31233, 30831
30713
30573
32139
31233
31708, 32083,
30522
30713
30770
30872, 32139
30539, 30817,
30490, 32298,
31354, 30646
30872
30730
30741, 30503
■■Blu-ray Disc
Denon
Elite
Funai
Insignia
Integra
Lexicon
LG
Magnavox
Marantz
Mitsubishi
32258, 32748,
33851
32854
30675
32596, 30675
32147, 32900,
32910, 33100,
33101, 33500,
33501
32545
31602, 30741
30675
32414, 33444
34004
Onkyo
Oppo
Panasonic
Philips
Pioneer
Samsung
Sharp
Sony
Sylvania
Tascam
Toshiba
VIZIO
Yamaha
32147, 32900,
33101, 33501,
32910, 33100,
33500
32545
31641, 33641,
33862, 32523,
32710
32789, 32434,
32084
32442, 32854,
30142
30199, 33195
32250
31516, 32180
30675
31818, 34004
32705, 33157,
32551
32563
32298
■■DVD-R
Accurian
Aristona
Denon
Emerson
Funai
Go Video
GPX
Hitachi
Humax
Irradio
LG
Loewe
Magnavox
Medion
Panasonic
Philips
Pioneer
30675
30646
30490
30675
30675
30741
30741
31664
30646
30646
30741
30741
30675, 30646
30741
30490, 31579,
32710, 32523
30646, 31340
30631
Pye
RCA
Samsung
Schneider
Sharp
Sony
Sylvania
Targa
Thomson
Toshiba
Yamaha
Zenith
30646
30522
31635, 30490,
32489
30646
30630, 30675
32861, 31070,
31516, 31033,
31536, 32180,
31633
30675
30741
30551
32277, 32551
30646
30741
■■VCR
DirecTV
Humax
Panasonic
Philips
RCN
ReplayTV
Sonic Blue
Sony
TiVo
20739
20739
20616
20739
20739
20616
20616
20636
20739, 20636
■■Cable Set Top Box (A to E)
3 Rivers Telephone
Cooperative
Accelplus
Access Cable
Television
Access
Communications
Ace Communications
ACTV Cablevision
Adams Cable TV
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
02586
01376, 01877,
01982
01376
73
Reference Information
ADB
Advanced Broadband
Advanced Telemedia
Airwave Networks
Akado
Alabama Broadband
Alcom
Algona Municipal
Utilities
All West
Communications
Alleghany Cablevision
Allegiance
Communications
Alliance
Communications
Allied Telesis
Almega Cable
Alpine Cable
Alta Utilities
Alternative Cable
Altibox
Altitude
Communications
Americable
International
American Broadband
02586, 01920,
01481, 01998,
02437, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01982
02043
01376
02437
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01877
01376, 01877,
01982
02437
01376
Anne Arundel
Broadband
Antietam Cable
Arc One
Arctic Cooperatives
Argent
Communications
Arialink Broadband
Arkwest
Arledge Electronics
Armstrong
Arris
Arvig Communication
Systems
Ashland Home Net
Askivision Systems
Astound Broadband
AT&T
ATC Communications
Atlantic Broadband
ATMC
Atwood Cable
01877
01376, 01877,
01982
American
01376, 01877,
Entertainment Network 01982
American Telecasting
01376, 01877,
01982
Amherst Telephone
01376, 01877,
01982
74
Amino
Aurora Cable TV
Ayrshire
Communications
B & C Cablevision
B & L Technologies
Bailey Cable TV
01615, 01481,
01898, 01998,
03028
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376
01376, 01877
02187
01376, 01982,
01998, 02345
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
00858
01376
01877, 01376
01376, 01982,
01998, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Baja Broadband
Baldwin County
Internet
Baldwin Telecom
Ballard Rural
Telephone Cooperative
Barbourville Utility
Commission
Bardstown Cable
Bascom
Communications
Base Cablevision
Bay Cablevision
Bay City Cablevision
Bay Country
Communications
Bay Creek
Communications
Bayland
Communications
Bayou Cable
Beamspeed
Beaver Creek
Telephone
Beaver Valley Cable
Beck's Cable Systems
Bee Line Cable
Beeline
BELD Broadband
Belgacom TV
Belhaven Cable TV
Bell
Bell Aliant
Bell Fibe TV
01376
01376, 01877,
01982
01877
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
02586
01376, 01877,
01982
01376, 01877,
01982
01877, 01982
01376, 01877,
01982
01376, 01877,
01982
01376
03028
01376, 01877,
01982
02132
01376, 01877,
01982
01998
01998
01998
Bellaire Cable
Bellevue Cable
Bend Broadband
Bentleyville Cable
Benton Cooperative
Telephone
Beresford Cablevision
Berkshire Cable Corp
Beulah Cable TV
Bevcomm
Beyond
Communications
Big Sandy Broadband
Biltmore
Communications
Blakely Cable
Television
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Mountain TV
Cable
Blue Ridge
Communications
Blue Sky Cable
Blue Valley
Telecommunications
Bobcaygeon Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 02187
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01615, 01898
01376, 01877,
01982
01376, 01877,
01982
01877, 01982
01376, 01877,
01982
01481, 01998,
03028
01481, 01998,
03028
01376, 01877,
01982
01877
01376, 01877,
01982
01898
01376, 01877,
01982
Booher Brothers Cable 01376, 01877,
01982
Bouygues Telecom
03007
Bowen Cablevision
01376, 01877,
01982
Boycom Cablevision
01376
Reference Information
Branch Cable
Brandenburg Telecom
Brandywine
Cablevision
Bresnan
Briand et Moreau
Cable
Bright Green
Communications
Bright House
Bristol Tennessee
Essential Services
Bristol Virginia Utilities
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01877, 01376
01877, 01998
01376, 01877,
01982
British American
01376, 01877,
01982
Broadstar
01376, 01877,
Communications
01982
Broadstripe
01376
Brockway Television
01376, 01877,
01982
Broken Bow Cable TV 01376, 01877,
01982
Brooks Bay Cable
01376, 01877,
01982
Brownwood TV Cable 01376, 01877,
Service
01982
Bryan Municipal
01376, 01877,
Utilities
01982
BT
02294
BTC Broadband
02586
Buckeye Cable System 01877, 01376,
02187
Bulldog Cable
01376, 01877,
01982
Bulloch Telephone
01376, 01877,
Cooperative
01982
Burlington Telecom
01481, 01615
Butler Bremer Mutual
01898
Telephone
Byron Cable TV
01376, 01877,
01982
C & W Cable
C.L. Davis Cable
Services
Cable &
Communications
Cable America
Cable Axion Digitel
Cable Communications
of Willsboro
Cable Cooperative
Cable Development
Corporation
Cable Management
Assocication
Cable Montana
Cable Nebraska
Cable Of The
Carolinas
Cable One
Cable Plus
Cable Suite
Cable Tech Cable TV
Cable TV of Camrose
Cable TV of East
Alabama
Cable TV of Slave
Lake
Cable TV of St. Paul
Cable Vision Services
Cablecom
Cablecom Mexico
Cablemas
Cablenet
CableSouth Media
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01877
01582
01376
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
Cableview
Communications
Cablevision
Cablevision du Nord
Cablevision of Marion
County
Cablevision T.R.P.
Cabovis
Caiway
CalNeva Broadband
CalTel Connections
Cameron
Communications
CAMS Cable
Canby Telcom
Cannon Valley
Cablevision
Caprock TV
Carnegie Cable
Carolina Mountain
Cable
Carr Communications
Carrell
Communications
CAS Cable
Cascade
Communications
Casey Cable
Caspian Community
TV
Cass Cable
Castle Cable Service
Catalina Cable
Catawba Services
01376, 01877,
01982
01877, 01376
01376
01376
01376, 01877,
01982
02436
02015, 0660
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01481
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
CBN
CBPU Cable
CCAP
CDE Lightband
Cedar Falls Utilities
Celect
Communications
Cencom
CentraCom Interactive
Central Texas
Communications
Central Valley Cable
Centre TV Cable
Centrovision
Century
Communications
Century Telephone
CenturyLink
CenturyTel TeleVideo
Chambers Cable
Champion Broadband
Chaparral Cablevision
Chariton Valley
Communications
Charter
Chatmoss Cablevision
01376, 01877,
01982
01376, 01877,
01982
01877
00858, 01615,
02586
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01998
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
02187
01376, 01877,
01982
01898, 01615
Chequamegon
Telephone Cooperative
Chesnee
01376, 01877,
Communications
01982
75
Reference Information
Chester Telephone
Chinook Progressive
Club TV
Chippewa Valley Cable
Choice Cable TV
Choice
Communications
Choice Television
ChoiceCable
Christy Cablevision
CimTel
Cincinnati Bell
Circle Bar Cable
Television
Cisco
Citizens Cable
Citizens Cable TV
Citizens Cablevision
Citizens Mutual
Telephone
Citizens Telecom
Citizens Telephone
City Cablevision
City of Barnesville
Cable
City of Baxter Springs
Cable
City of Hawarden
Cable
City of Norway Cable
City of Quitman Cable
76
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01877, 01376
01376, 01877,
01982
01877, 01982,
00858, 02589,
03028, 02132,
02345, 01582,
01883, 02378,
02401, 03265
01376
01376
01481
01376, 01877,
01982
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
City Of Salisaw
City of Sumas TV
Cable System
City West
Citycable
Clarence Telephone
Claro
Clear Creek
Communications
Clearview Cable
Clearview Partners
Clearview TV Cable
Clearvision Cable TV
Click Network
ClickOne
Clinton Cable
CLT Communications
ClubInternet
CMA Communications
CNS Television
Coast Cable
Communications
Coast Cablevision
01376
01376, 01877,
01982
01376
03477
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02132
01376
01376, 01877,
01982
01376
01376, 01877,
01982
Coast Communications 01376
Coastal Link
01376
Coaxial Cable TV
01376, 01877,
01982
Cobridge
01376
Cobridge
01376
Communications
Cogeco
01376, 01877,
01982
Colane Cable TV
01376, 01877,
01982
Colfax Highline Cable
Collinsville Cable
Colonial Cablevision
ColtonTel
Columbia Power and
Water
Columbus Telephone
Com Hem
Com-Link
Comcast
Communication
Services
Communicomm
Community Antenna
Service
Community Antenna
System
Community Cable &
Broadband
Community Cable
Service
Community
Communications
Community Telecom
Community Television
Compas Cable
Complete
Communication
Services
Comserv Ltd
ComSouth
ComSpan
Communications
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02378
01376, 01877
01376
00660, 02015
01376, 01877,
01982
01376, 01982,
01877, 02187
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01898
Comstar Cable TV
Consolidated Cable
Consolidated
Communications
Conuma Cable
Systems
Conway Corporation
Cable TV
Conxxus
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Coon Creek Telephone 01376
Coon Rapids Municipal 01376, 01877,
Utilities
01982
Coop CSCF
01376
Cooperative Television 01376, 01877,
Godahl
01982
CoopTel
00858, 01615,
01898
Coosa Cable
01376
Copper Mountain
01376, 01877,
Metropolitan
01982
Country Cable
01376, 01877,
01982
Country Cable TV
01376, 01877,
01982
Country Cablevision
01376
Country Cablevision
01376
Ltd.
Cowley Telecable
01376, 01877,
01982
Cox
01877, 01376
Craig Cable TV
01376, 01877,
01982
Craw-Kan Telephone
02586
Cooperative
Crestview Cable
01376, 01877,
01982
Cross Country TV
01376, 01877,
01982
Crosslake
01376, 01877,
Communications
01982
Reference Information
Crow Cable TV
CRRS-TV
CRST Telephone
Authority
Crystal Cable TV
CSI Cable
CT & R Cable
CTC
Cunningham
Telephone & Cable
Curtis Cable TV
01376, 01877,
01982
01376
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376
01376, 01877,
01982
CUTV
01376, 01877,
01982
CWA Cable
01376, 01877,
01982
D & D Cable Systems 01376, 01877,
01982
D & P Communications 01376
Daeryung
01877
Dairyland Cable
01376, 01877,
Systems
01982
Dakota Central
02345
Telecommunications
Dalton Cable
01877, 01982
Television
Darty Box
02436
Davis Communications 01376, 01877,
01982
Dawson City Television 01376, 01877,
01982
DCA Cablevision
01376, 01877,
01982
DDD Cablevision
01376, 01877,
01982
Dean Hill Cable
01376, 01877,
01982
Dean's Cablevision
01376, 01877,
01982
Decca Cable
01376, 01877,
01982
Deffner Cable TV
01376, 01877,
01982
Delhi Telephone
01376, 01877,
01982
Delta
02015, 00660
Delta Cable
01376
Demopolis CATV
01376, 01877,
01982
Denali TV
01376, 01877,
01982
Dery Telecom
01376
Deutsche Telekom
02132
Dickey Rural Networks 01376, 01877,
01982
Digeo
02187
Diode Communications 01376, 01877,
01982
Diverse
01898, 01982
Communications
Dixie Cable TV
01376, 01877,
01982
Dixon Telephone
01376, 01877,
01982
DMS Cable
01376, 01877,
01982
Downsville Community 01376, 01877,
Antenna
01982
Doylestown Cable TV 01376, 01877,
01982
Drummond Cable TV
01376, 01877,
01982
DTC
01376, 01877,
01982
Du
02401
Dumont Telephone
01376, 01877,
01982
Duncan Cable TV
01376, 01877,
01982
Eagle Broadband
01481, 01998,
03028
Eagle Cablevision
01376, 01877,
01982
Eagle Communications 01376, 02187
Eagle Valley Telephone 01481, 01998,
03028
EagleVision Wireless
01376, 01877,
TV Services
01982
East Arkansas Video
01376
East Cleveland Cable 01376, 01877,
01982
East Texas Cable
01376, 01877,
01982
Eastern Cable
01376, 01877,
01982
EastLink
01376
Easton Cable
01877
EasyTEL
01481, 01998,
03028
Eatel
01877
Echostar
03452
Electron Enterprises
01376, 01877,
01982
Elk River Cable TV
01376, 01877,
01982
Elkhart TV Cable
01376, 01877,
01982
Emery Telcom Video
01376, 01877,
01982
Emily Coop Telephone 01481, 01615
Enhanced
01376
Telecommunications
EnTouch
01376
EPB of Chattanooga
00858
Escape Broadband
01376, 01877,
01982
Eston CATV
01376, 01877,
Cooperative
01982
ETAN Industries
01376, 01877,
01982
Etex
02586
Execulink
01376
Eyecom
01376, 01877,
01982
■■Cable Set Top Box (F to J)
F & B Telephone
FairPoint
Communications
Falls Earth Station
02586
01376, 01877,
01982
01376, 01877,
01982
FamilyView
01376, 01877,
Cablevision
01982
Fannettsburg Cable TV 01376, 01877,
01982
Farmer & Merchant
01376, 01877,
Mutual
01982
Farmer's Telephone
01998, 03028
Cooperative
Farmers Independent 01376, 01877,
Telephone
01982
Farmers Mutual
01376, 01877,
Telephone
01982
Fayetteville Electric
01877
System
Federated Telephone
01376
Fenton Cablevision
01376, 01877,
01982
FiberCast Cable
01376, 01877,
Communications
01982
FiberNet Monticello
01376, 01877,
01982
Fibrant
01376, 01877,
01982
Fidelity
01376
Communications
First Cable Of Missouri 01376, 01877,
01982
FirstMile
01376, 01877,
01982
Flint Cable TV
01376, 01877,
01982
Florida Cable
01376
Foothills Rural
01877
Telephone Cooperative
Forsyth CableNet
01376, 01877,
01982
77
Reference Information
Fort Jennings
Communications
Fort Towson Cable
Foster
Communications
Frank Howard TV
Cable
Frankfort Plant Board
Cable
Freebox
FTC
Full Channel TV
Full Choice
Communications
Fusion Broadband
Futuristic Cablevision
Galaxy American
Communication
Galaxy Cable
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01976
01877, 01982,
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01998
Gardonville
Cooperative Telephone
Gatehouse Networks
01376, 01877,
01982
Gauthier Cablevision & 01376, 01877,
Electric
01982
GCI
01877
General
01376
Communications
Genext
01376, 01877,
01982
Geraldine Cable TV
01376, 01877,
01982
Get Real Cable
01376, 01877,
01982
GEUS
01376, 01877,
01982
Giant Communications 01376, 01877,
01982
78
Giles-Craig
Communications
Gilmer Cable
Television
Glasgow Electric Plant
Board
Glass Antenna
Systems
Glenwood
Telecommunications
Glide Cablevision
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
Globalcom
01376, 01877,
01982
Golden Belt Telephone 02586
Golden
01376, 01877,
Communications
01982
Golden Rain
01376, 01877,
Foundation
01982
Golden Valley Cable
01376, 01877,
01982
Golden West
01376, 01877,
Telecommunications
01982
Goldfield
01376, 01877,
Communications
01982
Gorham
01481
Communications
Gowrie Cablevision
01376, 01877,
01982
Grafton Cable
01376, 01877,
Communications
01982
Grand River Cable
01376, 01877,
01982
Grande
01877, 01376
Communications
Great Plains
01376
Communications
Green Hills
01376, 01877,
Communications
01982
Greene County Cable 01376, 01877,
TV
01982
Greenlight Community 01376, 01877,
Broadband
01982
Gridley Cable
01376, 01877,
01982
Griswold Cooperative 01481, 01998,
Telephone
03028
Grove Cable
01376, 01877,
01982
Grundy Center Utilities 01376, 01877
GTI
01481, 01998,
03028
Guadalupe Valley
01877
Haefele TV
01376, 01877,
01982
Haines Cable TV
01376, 01877,
01982
Hall Beach
01376, 01877,
Cooperative
01982
Hamilton County Cable 01877, 01982,
TV
01376
Hancel
01376, 01877,
01982
Hargray
01376, 01877,
01982
Harlan Community TV 01376
Harlan Municipal
01376
Utilities
Harmony Cable TV
01376, 01877,
01982
Harris Broadband
01376
Harrisonville
02586
Telephone
Harron Metrocast
01376, 01877
Hart Cable
01376, 01877,
01982
Hart Electric
01376, 01877,
01982
Hartelco
01376, 01877,
01982
Hastings Cable Vision 01376, 01877,
01982
Hathw@y
02043
Hawaiian Telcom
03028
HBC
01376, 01877,
01982
HBL Communications
HCS
Healthcare Cable
Systems
Heart of Iowa
Communications
Heartland Cable
Heartland Wireless
Communications
Heck's TV & Cable
Henderson Telephone
Hermosa Cablevision
Herr Cable
HFU Television
Hiawatha Broadband
HickoryTech
High Plains
Cablevision
Highland
Hill Top
Communications
Hinton CATV
HLM Cable Corp
HomeTel
Hometown Cable
Hometown Utilicom
Hood Canal
Cablevision
Hoonah Community
Television
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01898
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
Reference Information
Hooper Telephone
01376, 01877,
01982
Horizon Cable TV
01376, 02586
Horizon Telecom
02586
Horry Telephone
01376, 01877,
Cooperative
01982
Hospers Telephone
01376, 01877,
01982
Hotwire
02586
Houston Cable
01376, 01877,
01982
Hrvatski Telekom
02132
HTC Communications 01481, 01998,
03028
HTC Services
01376, 01877,
01982
Humax
00660, 02620,
02043, 02165
HunTel Systems
01376
Huxley
01376, 01877,
Communications
01982
Hydaburg Cable TV
01376, 01877,
01982
HYDE County
01376, 01877,
Cablevision
01982
i-CAN
02437
I-Speed
01376, 01877,
01982
ICE Cable Holdings
01376
ICS Communications
01376, 01877,
01982
Illini Cablevision Of
01376, 01877,
Illinois
01982
ImOn Communications 01877
Indco Cable TV
01376, 01877,
01982
Independence Telecom 01376, 01982
Utility
Independent Cable
01376, 01877,
Systems of Idaho
01982
Indevideo
01376, 01877,
01982
Index Cable TV
01376, 01877,
01982
Innovative Cable TV
Innovative Systems
Inotel
Inside Connect Cable
Insight
Integra Telecom
Inter Mountain Cable
Inter-County Cable
01376
01898
02437
01376
01376, 01877
02345
01877
01376, 01877,
01982
Interstate Cablevision 01481, 01998,
03028
Intertech Private Cable 01376, 01877,
01982
InviTV
02437
Iron River Cooperative 01376, 01877,
TV
01982
Irvine Community TV
01376, 01877,
01982
ITV-3
01376, 01877,
01982, 03028
J & L Cable
01376, 01877,
01982
J & N Cable
01376, 01877,
01982
Jack McClanahan
01376, 01877,
Cable TV
01982
Jackson Energy
01376, 01877,
Authority
01982
Jaguar
01376, 01877,
Communications
01982
James Cable Partners 01376, 01877,
01982
James Valley
02586
Cooperative Telephone
Jayroc Cablevision
01376, 01877,
01982
Jefferson County
01376, 01877,
Cable
01982
Jefferson Telecom
01376, 01877,
01982
Jeffersonville Cable TV 01376, 01877,
01982
Jet Broadband
01376
Johnston County
Cable
Journeyvision Cable
JP PTT
01376, 01877,
01982
01376, 01877,
01982
01615
■■Cable Set Top Box (K to N)
K-Communications
Kabel Deutschland
Kalida Telephone
Kalona Cooperative
Telephone
Kaplan Telephone
Karban TV Systems
KAS Cable TV
Kaslo Cable
KBS Cable TV
Keene Valley Video
Kelley
Communications
Kennebec Telephone
Kennedy Cablevision
Kentucky
Ridge Country
Communications
Keta Cable
KFW Communications
Kincardine Cable TV
Kings Bay
Communications
Kiss
KLiP
01376, 01877,
01982
02165
01376, 01877,
01982
02586
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
02132
01376, 01877,
01982
KM Telecom
Knology
KoolConnect
Koomiut Cooperative
01481
01877, 01376
01481
01376, 01877,
01982
KPN
02952, 02437
Kraus Electronic
01376, 01877,
Systems
01982
Kudzu Cable TV
01376, 01877,
01982
Kugluktuk Cooperative 01376, 01877,
01982
Kuhn Communications 01376, 01877
L & J Cable
01376, 01877,
01982
La Harpe
01376, 01877,
Communications
01982
La Harpe Video and
01376, 01877
Data Services
Lafayette Utilities
01376
System
Laguna Serrano Cable 01376, 01877,
01982
Lake Cable
01376, 01877,
01982
Lakeland Cablevision
01376, 01481,
01877, 01982,
01998
Lakeland Telecom
01481, 01998,
03028
Lakeview Cable
01376, 01877,
01982
Lamont Digital
01376, 01877,
Systems
01982
Lang
01376, 01877,
01982
Laurel Highland
01376, 01877,
01982, 02187
LB Cable
01376, 01877,
01982
Lehigh Valley
01376, 01877,
Cooperative Telephone 01982
Lemonweir Valley
01481, 01998,
Telephone
03028
79
Reference Information
Lexcom Cable
Services
Liberty Cablevision
Liberty
Communications
Limestone Cablevision
Lincoln Cable
Television
Lincolnville
Lindsey
Communications
LISCO
Litestream Holdings
LNE Telco
Localtel
Lockesburg
Cablevision
Lodgenet
Entertainment
Lone Pine Cable TV
Longview
Communications
Lonsdale Video
Ventures
Loretel Cablevision
Loretel Systems
Lost Island Cable TV
Lumos Networks
Lycom
Communications
M-Tek Systems
M.T.C. Cable
Maddock Cable TV
80
01376, 01877,
01982
01376
01481, 02586
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376
01376, 01877,
01982
01998, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Madison
01376, 01982
Communications
Madison County Cable 01376, 01877,
01982
Magio Sat
02132
Magnet
01615
Mahaska
01376, 01877,
Communications
01982
Mainstreet
01376, 01877,
Communications
01982
Maitland Cable TV
01376, 01877,
01982
Mallard Cable
01376, 01877,
01982
Manawa Telecom
02586
Manning Municipal
01376, 01877,
Utilities
01982
Manti Telecom
01481, 01998,
03028
Marco Island Cable
01376, 01877,
01982
Markdale Cable TV
01376
Marne & Elk Horn
01376, 01877,
Telephone
01982
Marquette-Adams
01376, 01877,
Telephone
01982
Martelle
01376, 01877,
Communications
01982
Cooperative
Mascon Cable
01376
Masset-Haida TV
01376, 01877,
Society
01982
Massillon Cable
01376
Matanuska Telephone 01481, 02586
Association
Matrix Cablevision
01376, 01877,
01982
Mattawamkeag
01376, 01877,
Cablevision
01982
McDonough Telephone 01376, 01877,
Cooperative
01982
McKee TV Enterprises 01376, 01877,
01982
McNabb Cable
MCV Broadband
Media One
Mediacom
01376, 01877,
01982
01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01982
01376
01376
02401
01376, 01877,
01982
01376, 01877
Mediapolis Telephone
Mediastream
Megacable
Meo
Merrimac
Communications
Metlakatla Indian
Community TV
MetroCast Cablevision 01376, 01982,
01877
MetroNet
01877, 0858
Metropolitan Cable
01376, 01877,
01982
MGS Cablevision
01376, 01877,
01982
MHTC
01481, 01998,
03028
Mi-Connection
01877
Microwave Satellite
01481, 01998,
Technologies
03028
Mid Century Telecom
01481, 01615
Mid Missouri
01376, 01877,
Broadband & Cable
01982
Mid Missouri
01376, 01877,
Telephone
01982
Mid-Coast Cablevision 01376, 01877,
01982
Mid-Hudson Cable
01376
Mid-Rivers
01376
Communications
Mid-South Cablevision 01376, 01877,
01982
Midamerican Cable
01376, 01877,
Systems
01982
Midcontinent
01376, 01877,
Communications
01982
Midstate
Communications
Midtel Cable TV
Milcom Cable
Milford Cable TV
Milk River Cable Club
Millennium Telecom
Millheim TV
Transmission
Millington CATV
Minburn
Communications
Minerva Valley Cable
MINET
MLGC Cable TV
MM&G Enterprises
MMDS Wireless East
Mobius
Communications
Monroe Cablevision
Monroe Utilities
Montana Opticom
Moosehead
Enterprises
Morris Broadband
Morristown Utility
Systems
Mosaic Telecom
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01877
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01877
01376, 02586
Reference Information
Motorola
01376, 02437,
02378, 01998,
00858, 02952,
01562, 01982,
02401
Moultrie
01376, 01877,
Telecommunications
01982
Mountain Shadows
01376, 01877,
Cable TV
01982
Mountain
01376, 01877,
Telecommunications
01982
Mountain Zone TV
01376, 01877,
01982
Movistar
03288
Moxi
02187
Mt. Baker Cable
01376, 01877,
01982
MTC
01376, 01877,
01982
MTC Technologies
01376, 01982
MTS
01998
Multiband Cable
01376, 01877,
01982
Municipality Cable
01376, 01877,
Operator
01982
Murphy Cable
01376, 01877
Murray Electric System 01376, 01877,
01982
Muscatine Power &
01376
Water
N.W. Communications 01376, 01877,
01982
National Cable
01376, 01877,
01982
Naujat Cooperative
01376, 01877,
01982
NDTC
01481, 01998,
03028
Nebraska Central
01376, 01877,
Telecom
01982
NEIT
01376, 01877,
01982
Nelson County
01376, 01877,
Cablevision
01982
Nelsonville TV Cable
Nemont
Communications
NET
New Century
Communication
New Day Broadband
01376, 01877,
01982
01376, 01877
01883
01376, 01877,
01982
01376, 01877,
01982
New England Cable
01376, 01877,
01982
New Jersey
01376, 01877,
Broadband
01982
New Knoxville Cable
01376, 01877,
Systems
01982
New North Networks
01376, 01877,
01982
New Paris Quality
01376, 01877,
Cablevision
01982
New Visions
01376, 01877,
Communications
01982
New Windsor Cable TV 01376, 01877,
01982
Newcastle Cablevision 01376, 01877,
01982
Newpath
01877, 01982
Communications
NewWave
01376, 02187
Communications
NexHorizon
01376, 01877,
Communications
01982
Nexicom
01376, 01877,
Communications
01982
Nextgen
01376, 01877
Communications
Niagara Community
01376, 01877,
TV Cooperative
01982
Nimpkish Valley
01376, 01877,
Communcations
01982
Nittany Media
01376
Nor-Cal Cable
01376, 01877,
Systems
01982
Nortex
01376, 01877,
Communications
01982
North American
Communications
North Central
Telephone
North Crossroads
Communications
North Dakota
Telephone
North Star Cablevision
North State
Communications
North Texas
Broadband
North Yellowstone
Cable TV
Northern Cable
Holdings
Northern Lakes Cable
TV
Northland
Communications
Northside TV
Northstar Broadband
Northwest
Communications
Northwest Community
Northwest Iowa
Telephone
Northwest Telephone
Cooperative
NorthwesTel
Norvado
Norwood Light
Broadband
Nova Cable
Management
Nova Cablevision
Novus
NPG Cable
Nsight
01376, 01877,
01982
02345
01376, 01877,
01982
02586
01376, 01877,
01982
00858
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01982
01376, 01877,
01982
01877
01877
01376, 01877,
01982
01376
02586
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376
02345, 02586
NTC Cable Services
01376, 01877,
01982
nTelos
01998
NTL
01060
NTS Communications 01376, 01877,
01982
NU Telecom
01998, 03028
NuLink
01877, 01376,
01982
Numericable
02436
Nushagak Cooperative 01376, 01877,
01982
■■Cable Set Top Box (O to S)
Oak Cable Systems
Of Iowa
Oak Hill Cablevision
01376, 01877,
01982
01376, 01877,
01982
Oasis Communications 01376, 01877,
01982
Oi TV
03452, 03454
Omni III Cable TV
01376, 01877,
01982
Oneida Cablevision
01376, 01877,
01982
OneLink
01376, 01877,
01982
OneSource
01376
Communications
Ono
01562
Open IPTV
01615
Opp Cablevision
01376, 01877,
01982
Optimum
01877
Optimus Clix
02437
Optus
01060
Orange
02407
Orbitel
01376
Communications
Oregon Cable Group
01376, 01877,
01982
Orion Cablesystems
01376, 01877,
01982
81
Reference Information
OTEC
Communications
Our Cable
02586
01376, 01877,
01982
Overton County Cable 01376, 01877,
01982
Oxford Networks
01376, 01877,
01982
Pace
01877, 01060,
02620, 01982,
01582, 01376,
01883, 02401,
03454
Packerland Broadband 01376
Paleajook Cooperative 01376, 01877,
01982
Palmer Mutual
01376, 01877,
Telephone
01982
Palmetto Rural
00858
Telephone Cooperative
Panasonic
01982
Pangnirtung
01376, 01877,
Cooperative
01982
Panhandle Telephone 01376
Panora
01481
Telecommunications
Paragould Light &
01376, 01877,
Water
01982
Parish
01376, 01877,
Communications
01982
Park Region Mutual
01481, 01998,
Telephone
02345, 03028
Park TV & Electronics 01376, 01877,
01982
Partner
01376, 01877,
Communications
01982
Pathway Com-Tel
01376, 01877,
01982
Patterson Cable TV
01376, 01877,
01982
Paul Bunyan
02586
Communications
PBT Cable Services
01376, 01877,
01982
82
PC One Cable
01376, 01877,
01982
PDQ Cable TV
01376, 01877,
01982
PEC Cablevision
01376, 01877,
01982
Pegasus
01376, 01877,
Communications
01982
Peoples CATV
01376, 01877,
01982
Persona
01376, 01877,
Communications
01982
Philippi
01376, 01877,
Communications
01982
Philips
01582, 02294
Phoenix
01376
Phoenix Cable
01376, 01877,
01982
Phonoscope
01376, 01877,
Communications
01982
Pickwick Cablevision
01376, 01877,
01982
Piedmont Cable
01376, 01877,
Services
01982
Pine Bluff Cable
01376
Pine Island Telephone 01481, 01998,
03028
Pine River Cable
01376, 01877,
01982
Pine Tree Cablevision 01376, 01877,
01982
Pineland Telephone
01481, 01615,
Cooperative
01898, 02586
Pinpoint
01376, 01877,
Communications
01982
Pioneer
01877
Pioneer Cable
01376, 01877,
01982
Pioneer
01376, 01877,
Communications
01982
Pioneer Long Distance 01898, 01615
Pitcairn Community
01376, 01877,
Cable TV
01982
Plantation Cable
System
Pleasant Vision
01376, 01877,
01982
01376, 01877,
01982
Polar Communications 02586
Polaris Cable
01376, 01877,
01982
Ponderosa Cablevision 01376, 01877,
01982
Poplar Bluff Municipal 01481, 01998,
Utilities
03028
Portal Cablevision
01376, 01877,
01982
Portugal Telecom
02401
Post Cablevision
01376, 01877,
01982
Premier
01376
Communications
Premiere
02620
Price County
01481, 01998,
Telephone
03028
Prime Cable
01376, 01877,
Corporation
01982
Prime Time Cable
01376, 01877,
01982
Princetown Cable
01376, 01877,
01982
Private Cable Systems 01376, 01877,
01982
Private Network Cable 01376, 01877,
Systems
01982
Project Mutual
01481, 01998,
Telephone
03028
Project Services
01376, 01877,
01982
PSC
01481, 01998,
03028
PTCI
01376
PVT Networks
01376, 01877,
01982
Quality Cable TV
01376, 01877,
01982
Quality One
01481, 01998,
Technologies
03028
Quinter Cable
Qwerty.TV
R & R Cable
Raftview
Communications
Rainbow Cable
Rainbow
Communications
Rainbow Lake Cable
TV
Rainier Connect
Ramapo Cable
01376, 01877,
01982
01898
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
Rancho Murieta
Association
Randolph Telephone
02586
Rapid Communications 01376, 01877,
01982
RC Communications
01376, 01877,
01982
RCN
01376
Reach Broadband
01376, 01877,
01982
Readlyn Telephone
02586
Rebeltec
01376, 01877,
Communications
01982
Red River Cable
01376, 01877,
01982
Reds Cable TV
01376, 01877,
01982
Regional Cable TV
01376, 01877,
01982
Reinbeck
01376, 01877,
Telecommunications
01982
Reservation Telephone 01376, 01998,
02345
Reserve Long
01376, 01877,
Distance
01982
Resnet
01376, 01877,
Communications
01982
Resort Cable
01376
Reference Information
Reveille Broadband
01376, 01877,
01982
Reynolds Cable
01376, 01877,
01982
RGA Cablle
01376, 01877,
01982
Ridgewood
01376, 01877,
Cablevision
01982
Ringgold Telephone
01376, 01877,
01982
Rio Virgin Telephone
01376, 01877,
01982
Riondel Community
01376, 01877,
Cable Society
01982
Ripley Video Cable
01376, 01877,
01982
Ritter Cable
01376, 01877,
01982
River Road Cable
01376, 01877,
01982
River Valley Cable TV 01376, 01877,
01982
River Valley
01481, 01998,
Telecommunications
03028
Riverside Cablevision 01376, 01877,
01982
Riviera Cable TV
01376, 01877,
01982
Robins Cable TV
01376, 01877,
01982
Rock Port Cablevision 01376, 01877,
01982
Rocky Mountain Cable 01376, 01877,
Systems
01982
Rogers
01877, 01376
Roome
01376, 01877,
Telecommunications
01982
Royal Telephone
01376, 01877,
01982
RTC
01376, 01877,
01982
RTEC
01376, 01877,
Communications
01982
Runestone Telcom
Rural Route Video
Rural Telephone
Company
RuralWest
Russellville Electric
Plant Board
S & K TV Systems
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
02586
01376, 01877,
01982
S & T Communications 01376, 01877,
01982
S-GO Video
01877, 01982
S.Bryer Cable TV
01376, 01877,
01982
Sagem
02407, 02436,
03288
Sagemcom
02407, 02436,
03007
Sallisaw Municipal
01376, 01877,
Authority
01982
Samsung
02407, 02015,
01877, 03477,
01060, 01987,
02589, 03265
San Bruno Municipal
01376, 01877,
Cable TV
01982
San Carlos
01376, 01877,
Cablevision
01982
San Juan Cable
01376, 01877,
01982
San Simeon
01376, 01877,
Community Cable
01982
Santel Comm
01376, 01877,
Cooperative
01982
Sasktel
01998
Satellite Cable
01376, 01877,
Services
01982
Satview Broadband
01376, 01877,
01982
Saugeen Telecable
01376, 01877,
01982
Savage
Communications
Sayward Valley
Communications
Schindler Cable TV
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
SCI Cable
01376, 01877,
01982
Scientific Atlanta
01877, 01982,
00858, 01987,
02401, 02436,
02345, 03028
Scio Cablevision
01376, 01877,
01982
Scott Telecom And
01376, 01877,
Electronics
01982
Scottsboro Cable TV
01376, 01877,
01982
Sea Island
01877
Seaside Cable TV
01376, 01877,
01982
Seaview
01376, 01877,
Communications
01982
SecureVision
01376, 01877,
01982
Semo Communications 01376, 01877,
01982
Senior TV
01376, 01877,
01982
Service Electric
01376, 01877,
01982
Service One Cable
01376, 01877,
01982
Shannon Vision
01376, 01877,
01982
Shaw
01376, 01877,
02187
Shawano Municipal
01376, 01877,
Utilities
01982
Shellsburg Cablevision 01376, 01877,
01982
Shen-Heights TV
01376, 01877,
01982
Shenandoah Cable
Shenandoah
Telecommunications
Shentel
Sherburne Cable
Sherman Cablevision
Shrewsbury Electric &
Cable
Silver Star
Communications
Simpson Country
Cable TV
SingTel
Siskiyou Cablevision
Sister Lakes Cable
Sjoberg's Cable TV
Skisat
SKT
SKY
Sky Angel
Sky Cablevision
SKY Deutschland
Skyline Cable
SkyPix
Sleepy Eye Telephone
Small Town Cable
Smile Content
Smithville
Sogetel
Somerfield Cable TV
Source Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01481, 01998,
03028
01376, 01877,
01982
01998
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
02620
01376, 01877,
01982
01376, 01877,
01982
02620
02586
01481, 01998,
03028
02345
01376, 01877,
01982
02437
02586
01998
01376, 01877,
01982
01376
83
Reference Information
South Benton
Cablevision
South Central
Communications
South Holt Cablevision
South Slope
Communications
Southeast Cable TV
Southern Cayuga
County Cable
Southern Coastal
Cable
Southern Kansas
Telephone
Southern Plains Cable
Southern Vermont
Cable
Southey Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01982
01376, 01877,
01982
Southside TV
01376, 01877,
01982
Southwest MN
01376, 01877,
Broadband
01982
Southwestern Bell
01376, 01877,
Video Services
01982
Spanish Fork
01376, 01877,
01982
Spencer Municipal
01376, 01877,
Utilities
01982
Spillway Cablevision
01376, 01877,
01982
Spirit Broadband
01376, 01877,
01982
Spring Creek Cable
01376, 01877,
01982
Springcom
01376, 01877,
01982
Springfield Cablevision 01376, 01877,
01982
Springville Cable
01376, 01877,
01982
84
St. George Island
Cable
St. John Cable
01376, 01877,
01982
01376, 01877,
01982
Stanley Cablevision
01376, 01877,
01982
Stanton Telecom
01376, 01877,
01982
Star Cablevision
01376, 01877,
01982
Starkville Cablevision
01376, 01877,
01982
Starlight
01376, 01877,
Communications
01982
Starview Cable of
01376, 01877,
Delaware
01982
Starvision
01376, 01877,
01982
Starwest
01376, 01877,
01982
Stellar
01376, 01877,
Communications
01982
Stellar Private Cable
01376, 01877,
Systems
01982
Stofa
02015
Stowe Cablevision
01376, 01877,
01982
Strategic Technologies 01376, 01877,
01982
Stubbs
01376, 01877,
Communications
01982
Suddenlink
01877, 01376
Summit Broadband
01376, 01877,
01982
Summit
01376, 01877,
Communications
01982
Sumner Cable TV
01376, 01877,
01982
Sun Country Cable
01376
Sunrise
01376, 01877,
Communications
01982
Supercanal
01376
Superior Cable & Data 01376, 01877,
01982
Supervision Cable TV
SureWest
Surry Telephone
SWAT Cooperative
Sweetwater Cable TV
Swisher Telephone
01376, 01877,
01982
01481, 01998,
02586
02586
01481, 01998,
03028
01376, 01877,
01982
02345
■■Cable Set Top Box (T to Z)
T-Home
TA Communications
Taloga Cable
TAT Cablevision
Tbaytel
TCSI Huntsville
TCT
TDS
TDS Telecom
Technicolor
Tekstar Cablevision
Tel-Star Cablevision
Tele-Media
Tele-Services
Tele2
Telecentro
Telecom Cable
Teledistribution Amos
Telefonica
Telenet
02132
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
03028
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
00660
01376
01376, 01877,
01982
01376
03288, 03028
01920, 03477
Telepak Networks
TelePartners
Telerent Leasing
Corporation
Telestar Systems
Telewest
Telmex
Telsat Systems
Telus
Templeton Telephone
TeNeT
Tesco Cable TV
Texas Mid-Gulf
Cablevision
Thames Valley
Communications
The Community
Agency
The Town of Mountain
Village Cable
Thomson
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01987
01376
01376, 01877,
01982
03028
01376, 01877,
01982
01898
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01582, 01982,
03007, 02407
Three River Digital
01376, 01877,
Cable
01982
Throckmorton
01376, 01877,
Cablevision
01982
TiftNet
01376, 01877,
01982
Time Warner
01877, 01376,
02187
Tip-Top
01376, 01877,
Communications
01982
TiVo
03265
Tobacco Valley
01376, 01877,
Communications
01982
Tongue River Cable TV 01376, 01877,
01982
Total Cable Service
01376
Reference Information
Touchet Valley
Television
TP
Trans-Video
Trappers Loop
Communications
Trenton Cable
Tri-County Cable TV
TrioTel
Communications
Troy Cablevision
Trust Cable TV
TruVista
Tudjaat Cooperative
Tulalip Broadband
Tullahoma Utilities
Tulugak Cooperative
Turquoise Turtle TV
TV Cable
TV Cable Company of
Andalusia
TV Cable of Winamac
TV Northeast
TV Service
TVB
TVC
TVision
TVMAX
TVS Cable
01376, 01877,
01982
02407
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01615
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Twin Valley
Communications
Two Creeks Cable
Ucluelet Video
Uintah Basin
Electronic Telecom
UMBC
Union Telephone
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
Unitah-Strata
Networks
United
01376
Communications
Association
United States Gypsum 01376, 01877,
01982
United Telephone
01376, 02586
Unitymedia
03477
Universal Cablevision 01376, 01877,
01982
Universal Satellite
01376, 01877,
Cable
01982
UPC
01582, 03477,
00660, 01060
UPC Cablecom
01582, 03477
Upper Peninsula
01376, 01877,
Communications
01982
US Online
01376, 01877,
01982
US Sonet
01376, 01877,
01982
USA Cablesystems
01376, 01877,
01982
USA Companies
01376, 01877,
01982
Utica Cablevision
01376, 01877,
01982
Utilities Board City of
01376
Foley
Utility Systems
01376, 01877,
Development
01982
Uwharrie
Communications
Valley Cable & Satellite
Communications
Valley Cable TV
Valparaiso
Communications
Venture
Communications
Cooperative
Venus Telephone
Cooperative
Veracity
Communications
Verizon
Vernon Telephone
Cooperative
Vicksburg Video
Videotron
Vidia Communications
Vidion Cable
Viken Fibernett
Viola Communications
Virgin Media
Vision
Communications
VisionComm
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01481, 01998,
03028
01376, 01898
01376, 01877,
01982
02378
02586
Wadsworth Cable TV
Waitsfield Cable
Walnut
Communications
Walnut Grove Cable
TV
Ward Communications
Warwick Valley
Telephone
Washington County
Rural Telephone
Cooperative
Watch TV
Waterville Cable TV
Watson Cable
01376
01877
01376, 01877,
01982
01376, 01877,
01982
02437
01376, 01877,
01982
01987, 01060,
03265
01376
01376, 01877,
01982
Vital Communications 01376, 01877,
01982
Vivo
03288
Vodafone
02401
Vogtmann Engineering 01376, 01877,
01982
Volcano Vision
01376
W.D.B.
01376, 01877,
Communications
01982
Wabash Independent
01376, 01877,
Networks
01982
Wave Broadband
Wavevision
WCTA
01376
01376
01376, 01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877
01376, 01877,
01982
03028
WEHCO Video
Weiss Lake Cable
West Alabama TV
Cable
West Carolina
Telephone
West Central
01376, 01877,
Telephone
01982
West Lake Cablevision 01376, 01877,
01982
West River Cable
01376, 01877,
Television
01982
WesTel Systems
01376, 01877,
01982
Western Broadband
01376, 01877,
01982
Western Cable Service 01376, 01877,
01982
Western Iowa
01877
Telephone
85
Reference Information
Western Telephone
Company
Western Wisconsin
Communications
Westman
Communications
Westphalia Broadband
Wetherell Satellite
Cable TV
WFL Cable Television
White County Video
WideOpenWest
Wikstrom Systems
Wilco Electronic
Systems
Wilkes
Telecommunications
Willamette Broadband
Windbreak Cable TV
Windjammer Cable
Windom
Communications
Windstream
Winslow
Communications
Wire Tele-View
Wireless One
Wittenberg Telephone
Wood County
Telephone
Woodsfield Municipal
Cable
Worth Cable TV
WT Services
86
01376, 01877,
01982
01376, 02586
01376, 02187
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
02187
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376
01376, 01877,
01982
01376, 01877
01877
01376, 01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
WTC Communications 01376, 01877,
01982
WTCI Cable
01376, 01877,
01982
Wyandotte Municipal
01376, 01982
Yadkin Valley Telecom 02345
Ycom Networks
01376, 01877,
01982
Yelcot Video Group
01376, 01877,
01982
Yelo
01376
Ygnition
01376, 01877,
01982
Zampelli Electronics
01376, 01877,
01982
Ziggo
02589, 02015,
00660, 02401
Zito Media
01376, 01982
Zoom Media
01376, 01877,
01982
■■Satellite Set top Box
@sat
Acoustic Solutions
ADB
AEG
Agora
Airis
Airtel
Akira
Alba
Altech UEC
Amstrad
AMTC
Arledge Electronics
Arnion
ASDA
AssCom
Astro
Aurora
01300
01284
00887
02738, 02813
01284
02813
02248
02738
01284, 02034
02059
00847, 01662,
01175, 01693,
02467
02738, 02813
00775
01300
01284
00853
01100, 02026
00879
Austar
Auvisio
Avanit
Axil
Ballard Rural
Telephone Cooperative
Bell
Bell Satellite TV
Biostek
Black Diamond
Boca
Boshmann
Boxer
BskyB
Bulltech
Bush
Cablecom
Caiway
Canal Digitaal
Canal Digital
Canal+
CanalSat
Century
CGV
Chess
Cignal
City of Cawker City
Cable
CityCom
Claro
Clatronic
Com Hem
Comag
Coship
Country Vision Cable
Croner
Crown
Cyfra+
00879
02738, 02813
01631
02738
00775
00775
00775
02738
01284
02026, 02813
01631
02443, 01692
01175, 00847,
01662
02738
02376, 01284,
02034, 02813
01195, 01197
02443, 00253
00853, 02957
00853
00853, 02657,
01195, 01197
00853, 02657
00856
02034
02026
02835
00775
01176
03787, 03790
02738
01176, 01915
02026, 02813
03787, 03790
00775, 00869
02813
01284
00853, 01409
Cyfrowy Polsat
D-box
DASAN
Delta
Denver
Deutsche Telekabel
Dgtec
Dicra
Digi
Digiality
Digihome
DigiLogic
DigiQuest
DigitAlb
DigitalBox
Digiwave
DirecTV
Dish Network
Dishpro
DishTV
DMT
DMTech
DRE
Dream Multimedia
DSE
DSTV
DTK Deutsche
Telekabel
Dual
Durabrand
Dyon
Echostar
Edision
Elta
Energy Sistem
Etisalat
Evesham Technology
00253, 0853,
01409
01114
03321
02443
02738
01195, 01197
01631
02738
02026
02813
01284, 02034
01284, 02034
01300, 02738,
01631
01195, 01197
01631, 01100
01631
01377, 00099
00775
00775
01300
03321
02738
01176
01237, 01652,
01923
02813
00879
01195, 01197
02034
01284, 02034
02738, 02813
00775, 00853,
01409
01631
02738
01631, 02813
02443
02034
Reference Information
Finlux
FinnSat
Fortec Star
Foxtel
Freesat
Freesat+
Frontier
Communications
Fuji Onkyo
Galaxis
General Instrument
General Satellite
Globo
GoGen
GOI
Gold Box
Gold Vision
Goodmans
Gradiente
Grocos
Grundig
Hanseatic
HD+
HDT
Hirschmann
Hitachi
Hornet
HTS
Huawei
Hughes Network
Systems
Humax
ibox
02034
01195, 01197
01631
01356, 00879,
01176
01692, 02376
02443
00775
01631
00853, 00879
00869
01176
02026, 02957
02738
00775
00853
01631
01284, 02376,
02034
00887, 00856,
00099
01409
00847, 02376,
02034, 01284,
00853, 00879
01100
02443
03321
02026
02034, 01284
01300
00775
03787
01377
01176, 02443,
01808, 01915,
02408, 01377,
03321, 01989,
02616
01652
ID Digital
Illusion
Imagin
Imperial
Indovision
iNETBOX
Innova
IQ
ISkyB
JVC
Kabel Deutschland
KabelBW
KabelNoord
Kaon
Kenwood
Koenig
KT
Lava
LG
Linsar
Lodos
Logik
LogiSat
Luxor
Macab
Majestic
Manhattan
Maplin
Marusys
Mascom
Matsui
Maximum
Mediabox
MediaSat
Mediascape
Medion
Mega TV
MegaSat
01176
01631
01195, 01197
01195, 01197
01989, 00856,
00887
01652, 01237
00099
02813
00887
00775, 01284
01195, 01197
01195, 01197,
01915
00253, 02443
01300
00853
01631
03321
01631
03321
01284
01284
01284, 02034
02026, 02813
02034
00853
02738
01300
02034
03543
02738
01284
02813
00853
00853
02835
02026
03321
02034, 02813,
01631, 02738
Metronic
Micro
Micro electronic
Milestone
Communications
Mitsai
Morgan's
Motorola
Movistar
Multichoice
Murphy
Mysat
NET
Netsat
Next Level
Nokia
NPG
NTV Plus
Olleh TV
Olleh-Skylife
Onn
Opticum
Optus
Orbitech
Orton
Pace
Pacific
Palcom
Palsonic
Panasat
Panasonic
02738, 01631
02813
02813
00775
02738
02026
00869, 00856,
03469
01409
00879, 02059,
02060
02034
02738
01409
00099, 00887
00869
00853
01631
01692, 02443
03321
03321
02034, 01284
02957
00879, 01356
01100, 01195,
01197
02957
00847, 01356,
00887, 01175,
01693, 00853,
01662, 02467,
02657, 03469,
01377, 02059,
02060, 02211,
03787, 03790,
02620
01284
01409
02813
00879
00847
Philips
Pioneer
PLDT
Premiere
Primacom
Pro Basic
Proline
Qook TV
Qook-SkyLife
Qwest
RadioShack
Raduga TV
RiksTV
Roadstar
SAB
Sagem
Sagemcom
Samsung
Sat Control
SAT+
Satellite Operations
Satplus
SatyCon
Schaub Lorenz
Schwaiger
Schwaiger CS
Scott
SEG
Shark
Sharp
Shaw Direct
Sherwood
00099, 00853,
01114, 02619,
00856, 00887,
02211, 03469
00853
02835
01114, 01195,
01197
01176, 01195,
01197
00853
01284
03321
03321
01377
00869
02957
01692
00853
01300, 01631
01692, 01114
01692
03063, 00253,
01377, 01989,
02467, 00853,
03321, 01662,
01693, 03834
01300
01409
00775
01100
01631
02034
01631, 02813,
02957
01631
02738
01284, 02034
01631
02034
00869
01409
87
Reference Information
Shinelco
Sigmatek
SilverCrest
SKY
Sky Brasil
SKY Deutschland
SKY Italia
SKY Mexico
SKY New Zealand
SKY PerfecTV!
SkyCable
SkyLife
Skylink
Skymaster
Skyplus
SkySat
Skyworth
SL
SM Electronic
Smart
Sony
Star
Star Choice
Stream System
Strong
Sunny
Sunstech
Supernova
T-Mobile
88
02738
02738, 02813
02026
00856, 00847,
01662, 00887,
01175, 02619,
01693, 00099,
01114, 01377,
01915, 02467,
03469
00856, 00887,
01377, 02619
02443, 01114,
01915, 02620
01693, 02467,
00853, 01356
00856, 02619,
00887, 01377,
03469
02211
02616
01631
03321
02443, 02957
01409
02026, 01175
01100
01631, 02835
02026
01409
01631
00847, 00853
00887
00869
01300
01409, 00879,
02813, 01300,
00853, 01284
01300
02738
00887
02443
TATA Sky
TDS Telecom
Teac
Technicolor
Technika
TechniSat
Techwood
tekComm
TELE System
Tele2
Telefonica
Telestar
Televes
Teleview
Communications
Televisa
Telsey
Telstra
Telus
Tevion
Thomson
TNT SAT
Toshiba
TrekStor
Triangle
Communication
System
Triax
Tricolor TV
True Visions
TV Vlaanderen
TVA Digital
TVB
UEC
03575
00775
02813
03469
01284, 02034
01195, 01197,
01100, 02813
01284, 02034
02738
01409, 02738,
02813
01195, 01197
01692, 01409
01100, 01197,
01195
01300
00775
00887
02738
01356
00775
01409, 02026,
02813
00847, 01175,
00853, 01662,
02619, 03469
01692, 01195,
01197
01284
02738
00775
00853, 01631
01176
02408
00853
01692, 01409
01989
00879, 01356
United Satellite
America
United States Wireless
Unitymedia
Unixbox
USA Wireless Satellite
TV
Vectra
Vestel
Via Embratel
Viasat
VisionNet
Viva
Vivo
Voom
VTC
Vu+
Walker
Wharfedale
Windstream
Wisi
World Satellite Cable
Systems
Woxter
Xoro
Xtreme
Yes
Zehnder
Zenith
Ziggo
Zircon
00775
00775
01915
01652
00775
01195, 01197
01284, 02034
03787
01197, 0253,
01195
01631
00856
01409
00869
03834
03543
02034, 01284
02034
00775
02957
00775
02813, 02738
02813
01300
00887, 01631
02034, 03469
00856, 00253
02443
02957
■■Video - Accessory
A.C.Ryan
ABS
Acer
Alienware
Apple
Boxee
Claritas
02709, 03350
01272
01272
01272
02615
03693
01272
CyberPower
D-Link
Daily Media
Dell
Digitech
Elonex
Eminent
Emtec
Fantec
Fujitsu Siemens
Gateway
Hewlett Packard
hFX
Howard Computers
Hush
iBUYPOWER
iconBIT
ISTAR
Linksys
Mede8er
Media Center PC
Microsoft
Mind
NiveusMedia
Northgate
Packard Bell
Philips
PopBox
Popcorn Hour
Ricavision
Roku
Sony
Stack 9
Systemax
Tagar Systems
Toshiba
Touch
Trust
VIA Technologies
Viewsonic
Voodoo
01272
03693
01272
01272
02260
01272
02260
02709
02709
01272
01272
01272
01272
01272
01272
01272
02709, 03350
02260
01272
02709
01272
01272, 01805
01272
01272
01272
01272
01272
02260
02260
01272
03061
02713, 01272
01272
01272
01272
01272
01272
01272
01272
01272
01272
Reference Information
Western Digital
Woxter
Xbox
ZT Group
02558
02709
01805, 01272
01272
■■CD
Advantage
AH!
Aiwa
Arcam
Atoll Electronique
Audio Research
Audiolab
Audiomeca
Audioton
AVI
Balanced Audio
Technology
Cairn
California Audio Labs
Cambridge
Cambridge Audio
Carver
CCE
Cyrus
Denon
DKK
DMX Electronics
Dynaco
Genexxa
Goldmund
Grundig
Harman/Kardon
Hitachi
Integra
JVC
Kenwood
Krell
Linn
Loewe
70032
70157
70157
70157
70157
70157
70157
70157
70157
70157
70157
70157
70029, 70303
70157
70157
70157
70157
70157
70766
70000
70157
70157
70032, 70000
70157
70157
70157
70032
71817
70072
70157, 70036
70157
70157
70157
Magnavox
Marantz
Matsui
MCS
Memorex
Meridian
Micromega
Miro
Mission
Myryad
NAD
Naim
NSM
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Primare
Proton
QED
Quad
Quasar
Radiola
RCA
Restek
Revox
Rotel
SAE
Sansui
SAST
Siemens
Silsonic
Simaudio
Sonic Frontiers
Sony
Sylvania
TAG McLaren
Tandy
70157
70157, 70029
70157
70029
70032
70157
70157
70000
70157
70157
70721, 70000
70157
70157
71817
70032, 70000
70303, 70029
70157
70032
70157
70157
70157
70157
70157
70029
70157
70032
70157
70157
70157
70157
70157
70157
70157
70036
70157
70157
70000, 70490
70157
70157
70032
Tascam
Teac
Technics
Thorens
Thule Audio
Universum
Victor
Wards
Yamaha
Zonda
73095, 73511,
73533
73531, 73532,
73551
70303, 70029
70157
70157
70157
70072
70032, 70000,
70157
70036, 70032,
70490
70157
40229
40029
40244
40027, 40029
40097
■■Audio - Accessory
Apple
Jamo
Onkyo
Polk Audio
81115
82228
81993, 82351,
82990
82228
■■Receiver
■■Cassette Deck
Aiwa
Arcam
Audiolab
Carver
Denon
Grundig
Harman/Kardon
Inkel
JVC
Kenwood
Magnavox
Marantz
Myryad
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Radiola
RCA
Revox
Sansui
Sony
Tascam
Technics
Thorens
Victor
Wards
Yamaha
40029
40076
40029, 40229
40029
40076
40029
40029
40070
40244
40070
40029
40029
40029
42157
40027
40229
40029, 40229
40027
40029
40029
40027
40029
40029
40243, 40170
73095
Integra
Onkyo
52503
52503
■■Cable PVR Combination
Access
Communications
Adams Cable TV
ADB
Armstrong
Arris
Atlantic Broadband
ATMC
Bend Broadband
Blue Ridge
Communications
Bright House
Buckeye Cable System
Cable Axion Digitel
Cable One
Cablecom
Cablevision
Cablevision du Nord
CCAP
Charter
01376, 01877
01376
01920
01376, 01877
02187
01877
01376
02187
01877
01877, 01376
01376, 01877,
02187
01376
01376, 01877
01582
01877, 01376
01376
01877
01376, 01877,
02187
89
Reference Information
Cincinnati Bell
Cisco
Citycable
Cogeco
Comcast
Cox
Darty Box
Digeo
Freebox
Grande
Communications
Humax
ImOn Communications
Insight
Inter Mountain Cable
Kabel Deutschland
Knology
Mediacom
MetroCast Cablevision
Midcontinent
Communications
Motorola
Moxi
NET
NorthwesTel
Novus
Numericable
Pace
Panasonic
Philips
Pioneer
RCN
Rogers
Sagem
90
01877, 01376
01877, 02589,
01982, 01582,
01883, 02401,
03265
03477
01376, 01877,
01982
01376, 01877,
01982, 02187
01877, 01376
02436
02187
01976
01877, 01376
02620, 02165
01877
01376, 01877
01877
02165
01877
01376, 01877
01877
01376, 01877
01376
02187
01883
01376
01376, 01877
02436
01877, 02620,
01582, 01883
01982
01582
01877
01376
01877, 01376
02436
Samsung
Scientific Atlanta
Service Electric
Shaw
SKY
SKY Deutschland
Source Cable
Suddenlink
Telenet
Telewest
Thomson
Time Warner
TiVo
Unitymedia
UPC
UPC Cablecom
Videotron
Virgin Media
Wave Broadband
Western Iowa
Telephone
Westman
Communications
WideOpenWest
Ziggo
03477, 01877,
01987, 02589,
03265
01877, 01982,
01987, 02436,
02401
01376, 01877
01376, 01877,
02187
02620
02620
01376
01877, 01376
01920, 03477
01987
01582
01877, 01376,
02187
03265
03477
01582, 03477
01582, 03477
01877
01987, 03265
01376
01877
01376, 02187
01877, 01376,
02187
02589
■■IPTV
ADB
Alcom
Altibox
Amino
02586, 01481,
01998, 03028
02437
02437
01615, 01481,
01898, 01998,
03028
Arkwest
Arvig Communication
Systems
AT&T
ATMC
Ballard Rural
Telephone Cooperative
Bayland
Communications
Bell
Bell Aliant
Bell Fibe TV
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Valley
Telecommunications
Bouygues Telecom
Brandenburg Telecom
BT
BTC Broadband
Burlington Telecom
Cabovis
CalTel Connections
Canby Telcom
Cannon Valley
Cablevision
CenturyLink
Cisco
ClubInternet
CoopTel
CRST Telephone
Authority
Dakota Central
Telecommunications
Dalton Cable
Television
Delta Cable
01481, 01998
01998, 02345
00858
01998, 03028
02586
02586
01998
01998
01998
01481, 01998
01481, 01998,
03028
01898
03007
01481, 01998
02294
02586
01481, 01615
02436
02586
01481
01481, 01998
01998
00858, 03028,
02345, 02378
02132
00858, 01615,
01898
01481, 01998
02345
01877, 01982
01376
Diverse
Communications
Du
Eagle Broadband
Eagle Valley Telephone
EasyTEL
Echostar
Etex
Farmer's Telephone
Cooperative
Golden Belt Telephone
Gorham
Communications
Griswold Cooperative
Telephone
GTI
Harrisonville
Telephone
Hathw@y
Horizon Cable TV
Hotwire
HTC Communications
Innovative Systems
Inotel
Integra Telecom
Interstate Cablevision
JP PTT
Kiss
KM Telecom
KoolConnect
KPN
Lakeland Cablevision
Lemonweir Valley
Telephone
Liberty
Communications
Lonsdale Video
Ventures
Lumos Networks
Manawa Telecom
01898
02401
01481, 01998
01481, 01998
01481, 01998,
03028
03452
02586
01998, 03028
02586
01481
01481, 01998
01481, 01998,
03028
02586
02043
02586
02586
01481, 01998
01898
02437
02345
01481, 01998
01615
02132
01481
01481
02952, 02437
01481, 01998
01481, 01998
02586
01481, 01998
01998, 03028
02586
Reference Information
Manti Telecom
Matanuska Telephone
Association
Meo
MHTC
Microwave Satellite
Technologies
Millennium Telecom
Minburn
Communications
MM&G Enterprises
Motorola
Movistar
MTS
NDTC
North Central
Telephone
North Dakota
Telephone
North State
Communications
Norvado
Nsight
NU Telecom
Oi TV
Open IPTV
Optimus Clix
Orange
OTEC
Communications
Pace
Panora
Telecommunications
Paul Bunyan
Communications
Pine Island Telephone
Polar Communications
Poplar Bluff Municipal
Utilities
01481, 01998
01481, 02586
02401
01481, 01998
01481, 01998
01481, 01998
01481, 01998,
03028
01481, 01998
02378, 01998,
02437, 0858,
02952, 01376
03288
01998
01481, 01998,
03028
02345
02586
00858
02586
02345, 02586
01998, 03028
03452, 03454
01615
02437
02407
02586
02401, 03454
01481
02586
01481, 01998
02586
01481, 01998
Portugal Telecom
Price County
Telephone
Project Mutual
Telephone
PSC
Quality One
Technologies
Qwerty.TV
Randolph Telephone
Readlyn Telephone
Reservation Telephone
River Valley
Telecommunications
S-GO Video
Sagem
Sagemcom
Samsung
Sasktel
Scientific Atlanta
Silver Star
Communications
SingTel
SKY Deutschland
Skyline Cable
SkyPix
Smile Content
Smithville
Sogetel
SureWest
Surry Telephone
SWAT Cooperative
T-Home
Telefonica
Telus
TeNeT
Thomson
TV Northeast
TVB
02401
01481, 01998
01481, 01998
01998
01481, 01998
01898
02586
02586
01998, 02345
01481, 01998
01877
02407, 03288
02407
02407
01998
00858, 02345,
03028
01481, 01998,
03028
01998
02620
02586
01481, 01998
02437
02586
01998
01481, 01998,
02586
02586
01481, 01998,
03028
02132
03288, 03028
03028
01898
03007, 02407
01481, 01998
01615
Twin Valley
Communications
United Telephone
Venture
Communications
Cooperative
Verizon
Viken Fibernett
Vivo
Watch TV
West Carolina
Telephone
Western Wisconsin
Communications
Westphalia Broadband
Wilkes
Telecommunications
Yadkin Valley Telecom
02586
02586
01998
02378
02437
03288
01481, 01998
03028
02586
02586
01481, 01998
02345
■■IPTV PVR Combination
ADB
Altibox
Amino
AT&T
ATMC
Beeline
Belgacom TV
Bell
Bell Aliant
Bell Fibe TV
Bouygues Telecom
BT
Cabovis
CenturyLink
Cisco
ClubInternet
Deutsche Telekom
Du
Echostar
Freebox
i-CAN
Innovative Systems
InviTV
Kiss
KPN
Lumos Networks
Magio Sat
Magnet
Meo
Motorola
02437
02437
01615, 01898
00858
03028
03028
02132
01998
01998
01998
03007
02294
02436
01998
00858, 03028,
02132, 02345,
02378
02132
02132
02401
03452
MTS
Numericable
Oi TV
Orange
Pace
Philips
Portugal Telecom
Sagem
Sagemcom
Samsung
Sasktel
Scientific Atlanta
SKY Deutschland
SureWest
T-Home
Telefonica
Telus
Thomson
Verizon
Vodafone
01976
02437
01898
02437
02132
02952, 02437
01998
02132
01615
02401
02437, 02378,
00858, 01998,
02952, 02401
01998
02436
03452, 03454
02407
02401, 03454
02294
02401
02407, 03288
02436, 02407,
03007
02407
01998
00858, 02345,
02401, 03028
02620
01998
02132
03028, 03288
03028
03007
02378
02401
■■PVR
DirecTV
Humax
Panasonic
Philips
20739
20739
20616
20739
91
Reference Information
RCN
ReplayTV
Sonic Blue
Sony
TiVo
92
20739
20616
20616
20636
20739, 20636
Integra Division of
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650
http://www.integrahometheater.com
Integra Division of
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.integra.eu
Integra Division of
1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai,
China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396
http://www.integra.com.cn
Integra Division of
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
http://www.integraworldwide.com
D1404-0
SN 29401777PDF_EN
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 7 7 7 *