Samsung WA167LD1 User manual

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 1

WASHING MACHINE

User’s Manual

“In order to prevent malfunctioning of the appliance, before using your washing machine for the first time, please read this user manual carefully and keep it at hand for future reference.”

FEATURES ................................................................................2

COMPONENT DESCRIPTION...................................................3

SAFETY INSTRUCTIONS..........................................................4

INSTALLATION AND MAINTENANCE ......................................5

PLACE ...................................................................................5

FOR WASHING MACHINES WITH DRAIN PUMP................5

HOW TO CONNECT THE WATER SUPPLY HOSE .............5

HOW TO CLEAN THE FILTER NET......................................6

HOW TO ADD DETERGENT.................................................6

HOW TO ADD SOFTENER ...................................................6

HOW TO CLEAN THE FILTER..............................................6

ONE-TOUCH ADJUSTABLE LEGS.......................................6

GROUNDING .............................................................................7

WASH INSTRUCTIONS.............................................................8

PROCEDURE ........................................................................8

WASH PROGRAMS ..............................................................8

WASH PROGRAMS...................................................................9

OPTIONAL PROGRAMS ...........................................................9

TROUBLESHOOTING .............................................................10

SPECIFICATIONS

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 2

FEATURES

Detergent dissolvent dispenser and softener dispenser

• The timely addition of the detergent prevents your clothes from damage.

• The convenient dispenser automatically adds the softener.

Softener dispenser

MAGIC FILTER

• This magic filter ensures that all the naps inside the drum are entrapped, resulting in a perfect filtration and efficient cleaning.

Water bumps fall on the clothes.

• Two powerful cascades forcefully fall on the very dirty clothes and gently push them downward, thus removing the dirt in a more effective way.

2

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 3

COMPONENT DESCRIPTION

WATER HOSE

(Blue = cold water)

WATER HOSE

(Red = hot water)

DRAIN HOSE

DOOR

DETERGENT BOX

MAGIC FILTER

BLEACHER APERTURE

SOFTENER

CONTROL PANEL

PLUG

GROUNDING CABLE

(Green)

ONE-TOUCH

ADJUSTABLE LEGS

3

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 4

SAFETY INSTRUCTIONS

Warning

To reduce the risk of fire, electric shock or personal injuries, when using your machine follow the basic cautions, included in the following sections.

CAUTION

•

To prevent risks, If the electric plug cable is damaged, ask the manufacturer, service center or authorized and trained personnel to replace it .

➢ Verify that the washing machine is grounded.

To prevent electric shock, when grounding the equipment, use metal tubes.

Never user gas pipes or telephones lines for the grounding connections as there is danger of explosion or overvoltage due to atmospheric discharge.

➢ During spinning do not place hands in the drum.

As the drum is spinning at a very high speed, the rotating parts may injure your hands.

➢ Place the clothes in the washing machine distributing them uniformly.

If the clothes are not well distributed, there may be noise and vibration.

➢ Do not use excessively hot water. (50°C or higher).

The plastic parts may suffer deformation or damage. In addition, the clothes may suffer damage or color loss.

➢ Check the pockets before washing.

➢ Do not press the control panel with a sharp object.

The result may be damage to the panel or malfunctioning.

- If the power supply cable is damaged, the technical service, specially designated by the manufacturer, shall replace it, as the process requires special tooling.

➢ Do not store or use gasoline or other flammable liquids or vapors close to this or any other appliance.

➢ To relief pressure on hoses and valves and minimize leaks, if a hose or valve breaks or is damaged, close the water inlet cock each time that the washing machine is not in use.

➢ Never operate this appliance if it is damaged, malfunctioning, partially disassembled or contains broken or missing parts, including a damaged cable or key.

➢ To minimize the possibility of electric shock, before attempting any maintenance or cleaning action, unplugged the equipment from the socket or disconnect the appliance from the distribution panel by removing the fuse or disconnecting the circuit switcher.

4

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 5

INSTALLATION AND MAINTENANCE

PLACE. . .

Leave a free space between the washing machine and the wall of, at least, 10 cm.

Place the washing machine on a leveled and firm surface to prevent noise and vibration.

Adjust the adjustable legs to level it. Never place the washing machine close to water.

Never place the washing machine in rooms with vapors or exposed to the rain.

The humidity may destroy the electrical isolation and lead to risk of electric shock.

Avoid direct sunlight or heaters.

As direct heat may damage the plastic and electric parts, never place the washing machine close to ovens, furnaces, etc. Never place it under direct sunlight.

FOR WASHING MACHINES WITH

DRAIN PUMP

Remove the hose cap, connect the drain hose.

hose cap

Verify that the drain hose is properly connected to the drain outlet in the back of the washing machine.

Install the drain hose, approximately 90~100cm above ground level. drain hose

HOW TO CONNECT THE WATER SUPPLY HOSE

1. Remove the water supply hose adapter.

2. With a Philips screwdriver, loosen the three screws of the adapter. The, take the adapter and hold the parts

(a) and (b) leaving 5-mm space, approximately, between them.

3. Connect the adapter to the water cock firmly screwing the bolts.

Next, turn the part (b) in the direction of the arrow and join the parts (a) and

(b).

4. Connect the water supply hose to the adapter. Push the part (c) of the water supply hose downward.

The sound of a “click” means that the part (c) has been released and the hose remained automatically connected to the adapter.

5. Connect the other end of the water supply hose to the water inlet valve located in the back of the machine. Fully screw the hose in the right direction.

If the water cock is threaded, connect it to a hose fitting this kind of cock.

After finishing the connection, if water leaks through the hose, repeat the above-mentioned steps. Use a conventional cock.

NOTE If the cock is square, remove the spacer before introducing the cock in the adapter.

5

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 6

HOW TO CLEAN THE FILTER NET

1. Pull and tug the top of the filter.

2. Open the cover as shown in the figure.

3. Clean the filter. 4. Close the cover and insert the bottom of the filter first in the basked and then push the filter until hearing the sound of knock.

HOW TO ADD DETERGENT

1

.

Open the detergent dissolvent box pulling in the direction of the arrow, as shown in the scheme.

2.

Add the proper quantity of detergent in the box for one wash to prevent overflow.

ONE-TOUCH ADJUSTABLE LEGS

1.

Pull the control handle of the adjustable leg frontward and push aside, which is located on the right and left side in the front.

2.

Adjust height.

HOW TO CLEAN THE FILTER

1.

Place a cloth under the filter of the washing machine to prevent damping the ground.

2.

Turn the filter cap to the left.

3.

Take off the filter and remove the accumulated dirt.

4.

Reassemble reversing the order of the abovementioned steps.

3.

Following the adjustment, pull once more the control handle frontward and fix the adjustable leg.

HOW TO ADD SOFTENER

• When adding the proper quantity of softener

(one dose) to the softener dispenser, it goes automatically to the water of the last rinse.

❖ This operation cannot be performed if solely the hot water is connected.

SEE IF THE MACHINE IS PLACED LEVEL BY

CHECKING THE POSITION OF THE WASHING TUB.

• Open the lid of the machine, pour water into the tub up to the level just below the pulsator, and adjust the legs so that the pulsator is positioned at the center of the water as shown in the figure.

• Place the machine more than 10cm away from the wall.

• Adjust the legs on feet for levelling .

❖ In there is excess of software accumulated above the baseline, it may not function properly.

6

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 7

GROUNDING

For your own safety, verify that the washing machine is properly grounded.

● If the appliance is properly grounded, in the event of electricity leakage, the danger of electric discharge is prevented.

IF THE SOCKET HAS A GROUNDING TERMINAL

● No other grounding is necessary.

● When using the extension cable, if it does not have a dedicated socket, verify the grounding connection.

Grounding socket

Grounding socket

Wall socket Extension socket

IN THE ABSENCE OF GROUNDING CONNECTION IN THE SOCKET

● Connect to a metal or copper water cock.

● If the water cock is plastic, the grounding connection is ineffective.

Metal water cock

● Roll the copper wire

2 or 3 times over the water cock.

Grounding

● Connect the grounding wire to copper and bury 75 cm under wet soil.

Copper

Avoid the following places for the grounding connection.

● Never connect the grounding cable to a telephone cable or a lightning rod as it is extremely dangerous in case of thunderstorms.

● Never connect the grounding cable to a gas tube as there is danger of explosion.

● When you cannot find a proper place to make the connection, use the socket, connecting it to the fuse box.

7

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 8

WASH INSTRUCTIONS

PROCEDURE

1. Sort the clothes.

Avoid washing delicate clothes with very dirty garments or color clothes with linen.

2. Place the clothes inside the washing machine.

Before loading check all the pockets, close all zippers, etc.

3. Add/Insert the detergent (see page 6).

4. Add/Insert the softener (see page 6).

5. Push the button “ON”.

The water level and temperature are determined automatically if you select the program “FUZZY” and then press the button START/PAUSE.

6. Select the wash program or optional function (see page 8).

7. Select the water level.

Before selecting the water level, take into account the following points. When you select the programs FUZZY, PRE-WASH, SPEEDY OR DELICATE, the water level shall be selected automatically (AUTO), but if you want to manually select the water level, you can select between HIGH, MEDIUM,

LOW and EXTRA LOW.

8. Select the water temperature

Before selecting the water temperature, remember the following:

1) you can select HOT, WARM and COLD for all the programs, except for the

DELICATE and WOOL programs.

HOT is hot wash and cold rinse.

WARM is warm wash and cold rinse.

COLD is cold wash and cold rinse.

2) For the DELICATE program you can select between WARM and COLD.

9. Close the door and push the button START/PAUSE

10. Do you want an extra rinse?

During the operation push the optional function button. The rinse times change between 1 and 5 times.

The program “extra rinse” is not available for the condition of PAUSE and

WRINGER.

WASH PROGRAMS

Wash Time

Wash Action

Wash Temp

Deep Rinse

Spin time

FUZZY

18 min

Normal

HOT

WARM

COLD

COLD

6 min

HEAVY

20 min

Normal

HOT

WARM

COLD

COLD

6 min

SPEEDY

5 min

Normal

HOT

WARM

COLD

COLD

3 min

WOOL

6 min

Gentle

WARM

COLD

WARM

COLD

1 min

DELICATE

6 min

Gentle

WARM

COLD

WARM

COLD

1 min

8

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 9

WASH PROGRAMS

FUZZY program

• The best wash program is selected automatically.

• The weight and level of the water are determined automatically

❖ Turn the washing machine off at the completion of the course.

HEAVY program

• This program is suitable for soiled or stained clothes.

• The weight and level of the water are determined automatically. You can also select the level of water of your preference.


WOOL program

• This program is suitable for wool.

• Solely the water levels High and medium are available.

❖ Disconnect the power supply cable at the completion of the cycle.

DELICATE program

• The wash course is speedy. This program is suitable for delicate garments such as lingerie.

• The weight and level of the water is determined automatically; you can also select the level of water of your preference.


SPEEDY program

• Saves time and power.

• This program is suitable for slightly dirty clothes.

• The quantity of laundry and the level of water shall be determined automatically; nevertheless you can select the level of water of your preference.


OPTIONAL PROGRAMS

WASH ALONE

• When you select this function, solely the wash cycle is operating.

• By pushing the optional function button during the wash, the wash term changes in 2-minutes slots.

• The wash time may be changed between 3 and 5 minutes.

• Load size and water level are determined automatically.

❖ Turn off the washing machine at the completion of the cycle.

SPIN ALONE

• When you select this function, solely the spinning cycle is operating.

• By pushing the optional function button during spinning, its duration changes. The spinning time may be changed between 1 and 7 minutes.

RINSE AND SPIN ALONE

• When this function is selected, solely the rinse and spin cycles are operating, without the wash function.

• By pushing the optional function button during the operation you can change the rinse times. The rinse duration may be changed between 1 and 5 times. In this function you cannot change the spin time.


RINSE ALONE

• When you select this function, solely the rinse cycle is operating.

• By pushing the optional function button during the operation you can change the rinse times. The rinse duration may be changed between 1 and 5 times.


SOAK

• By soaking the laundry, you can remove the heavy dirt.

• You may select the soak cycle after selecting the wash program.

• When you select the Soak program, the 5minutes cycle (1 minute of wash and 4 minutes of pause) shall continue for 30 minutes before starting the main program.

❖

Turn off the washing machine at the completion of the cycle.

DRIP DRY

• This function allows you to remove the clothes from the machine while still wet, before the final spin.

• You may select the “drip dry” cycle after selecting the main wash program.

• If you select the “drip dry” cycle, the cycle ends before the final spin.


DELAY START

• This function allows you to delay starting the program until its selection, for 3, 4.. 18 hours.

• By pushing the Delay start key, you can select the delay term in 3, 4... 18 hours and the washing machine shall fulfill the wash program following the delay term.

9

WA1346D0-GB-01665D 2/18/03 10:34 AM Page 10

TROUBLESHOOTING

THE WASHING MACHINE IS NOT

WORKING

Is the water cock open?

Is the washing machine plugged?

Is their power supply?

Is there enough water?

THE WASHING MACHINE DOES NOT

RECEIVE WATER

Is the water cock open?

Is there any water supply?

Are the water supply hose or the connection hose clogged?

Is the water cock frozen?

If after 60 minutes there is no water, an alarm shall be activated, showing “7E” in the remaining time indicator.

THE WATER DOES NOT DRAIN

Does the drain hose point downward?

Is the drain hose frozen?

Is the drain hose clogged?

If after 15 minutes the water does not drain, an alarm shall be activated, showing “E” in the remaining time indicator.

THE WATER SUPPLY DOES NOT STOP

Close the water cock

Turn off the washing machine

Contact the service center

THE SPIN IS NOT WORKING

Are the clothes uniformly distributed inside the washing machine?

Is the washing machine installed on a flat surface?

10

IN THE EVENT OF REQUESTING TECHNICAL SUPPORT

In the event of problems with this product, contact any technical support center close to your home, indicating your name, address and telephone number.

EXPORTED BY

SAMSUNG ELECTRONICS CO., LTD 416, MAETAN-3DONG, SUWON,

KOREA

SPECIFICATIONS

POWER CONSUMPTION

DIMENSIONS

WEIGHT

WASH

51kg

675W

W640 X 698 X 1070mm

WATER LEVEL

STANDARD

HIGH

MEDIUM

LOW

EXTRA LOW

WATER CONSUMPTION

WATER PRESSURE

0.05 ~ 0.78MPa

0.5 ~ 8.0kg

•

f/cm

2

ROTATION SPEED OF

SPIN DRUM

WASHING TYPE Stirring type

CONSUMPTION

100

l

85

l

70

l

46

240

l l

700 rpm

675W

CODE NO : DC68-01665D-

01

No results