Samsung UN32JH4005F User Manual

Warning! Important Safety Instructions
LED TV
Please read the safety instructions below before installing and using the product.
CAUTION
user manual
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
Si desea hacernos alguna pregunta o comentario en relación con los productos de Samsung,
comuníquese con nuestro centro de atención al cliente de SAMSUNG.
Country
MEXICO
ARGENTINE
URUGUAY
PARAGUAY
BRAZIL
Securing the Installation Space
CHILE
BOLIVIA
COLOMBIA
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics
only.
• If you use parts provided by another manufacturer, it may result in a problem
with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
✎✎
COSTA RICA
DOMINICA
✎✎
✎✎
ECUADOR
EL SALVADOR
Installation with a wall-mount.
4inches
GUATEMALA
4inches
4inches
4inches
HONDURAS
4inches
JAMAICA
4inches
NICARAGUA
PANAMA
PERU
PUERTO RICO
Web Site
Customer Care Center 
01-800-SAMSUNG (726-7864) www.samsung.com/mx/support
Dirección: General Mariano Escobedo 476 Piso 8 Col.
Anzures Delegación Miguel Hidalgo, Distrito Federal CP 11590
0800-333-3733
www.samsung.com/ar/support
000-405-437-33
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
009-800-542-0001
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
0800-124-421 (Demais
www.samsung.com/br/support
cidades e regiões)
4004-0000 (Capitais e grandes
centros)
800-SAMSUNG(726-7864)
www.samsung.com/cl/support
800-10-7260
www.samsung.com/cl/support
Bogotá 600 12 72
www.samsung.com/co/support
Gratis desde cualquier parte
del país 01 8000 112 112 ó
desde su celular #SAM(726)
www.samsung.com/latin/support (Spanish)
0-800-507-7267
00-800-1-SAMSUNG (726-7864) www.samsung.com/latin_en/support (English)
1-800-751-2676
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
1-800-10-72670
www.samsung.com/latin/support (Spanish)
1-800-SAMSUNG (72-6786)
www.samsung.com/latin_en/support (English)
800-6225
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
1-800-299-0013
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
1-800-299-0033
800-27919267
www.samsung.com/latin/support (Spanish)
800-2791-9111
1-800-234-7267
1-800-SAMSUNG (726-7864)
001-800-5077267
www.samsung.com/latin_en/support (English)
www.samsung.com/latin_en/support (English)
800-7267
800-0101
0-800-777-08
1-800-682-3180
TRINIDAD &
TOBAGO
1-800-SAMSUNG (726-7864)
VENEZUELA
0-800-SAMSUNG (726-7864)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/pe/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/ve/support
(Sólo Mexico)
IMPORTADO POR : SAMSUNG ELECTRONICS MÉXICO S.A. DE C.V.
GENERAL MARIANO ESCOBEDO 476 PISO 8
COL. ANZURES, DELEGACIÓN MIGUEL HIDALGO MÉXICO, DISTRITO
FEDERAL C.P. 11590
TEL : 01 (55) 5747-5100 / 01 800 726 7864
BN68-06948N-00
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
y Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
y Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
y Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
Turns the TV on and off.
Displays and selects the available video
sources.
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to
select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the channel list on the screen.
Displays the main on-screen menu.
MEDIA.P
Views the Media Play.
SLEEP
Automatically shuts off the TV at a preset time.
Displays information on the TV screen.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the
values seen on the menu.
FÚTBOL
P.SIZE: Lets you choose the picture size.
CC: Controls the caption decoder.
: Turns the Sports Mode on or off.
yy Component
yy Coaxial (RF)
yy Connecting through the HDMI cable may not be supported
depending on the PC.
yy For Set-top box connection using HDMI cable, we highly
recommend you to connect the HDMI IN (STB) port.
yy HDMI
HDMI connection
Blu-ray player / DVD / Set-top box
HDMI OUT
Cable Plugs
Do not plug in opposite or wrong direction. It could
damage the TV port.
Ports/Jacks
HDMI
particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
Audio connection
TV Rear Panel
Digital Audio
OPTICALSystem
Power Input
OPTICAL
USB
USB
VHF/UHF Antenna
Do not plug cables in upside down. Be sure to check the orientation
of the plug before plugging it in.
the environment. Please contact your local authorities for disposal or recycling information.
TV Controller (Panel Key)
ANT OUT
or
The TV’s Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control.
y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
Cable
electrical supply. (depending on the model)
Selecting the Media Play
y Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
y Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do
Function menu
not touch the power cord with wet hands.
m R s
y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
P
contact an authorized dealer or service center.
G
R
B
R
W
R
G
B
R
W
R
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,
COMPONENT OUT
or cause the insulation to deteriorate.
y Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious
damage to your set.
Remote control sensor
TV Controller
The image is drawn by facing
the front side of the TV.
Y
Selecting the Menu
y Use only a properly grounded plug and receptacle.
PB
PR
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the
appearance or erase the printing on the product.
y Do not expose the apparatus to dripping or splashing.
y Do not dispose of batteries in a fire.
y Do not short circuit, disassemble, or overheat the batteries.
y There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
y WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL
R
W
R
you cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Press
the POWER button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV guides.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
AUDIO OUT
L-AUDIO-R
L-AUDIO-R
Component connection
AV connection
Blu-ray player / DVD
VCR / Blu-ray player
Changing the Input Source
✎✎ Exits the menu when pressing the controller more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first,
Y
VIDEO OUT
AUDIO OUT
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
y To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily
y Store the accessories (batteries, etc.) in a location safely out of the reach of children.
y Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
y Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
y To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.
W
Power Off
(especially when children, elderly or disabled people will be left alone in the house).
accessible at all times.
y Do not allow children to hang onto the product.
R
Y
Selecting a Source
Return
y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
-2-
❑❑ Seeing Channels
Source List
Use to select TV or an external input source such as a DVD player / Bluray player / cable box / STB satellite receiver.
1. Press the SOURCE button.
2. Select a desired external input source.
■■ TV / AV / Component / HDMI
✎✎ You can only choose external devices that are connected to the TV.
In the Source List, connected inputs will be highlighted.
Add, delete or set Favorite channels and use the program guide for
digital broadcasts. Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by pressing the ▲/▼
buttons, and pressing the ENTERE button. Then you can watch the
selected channel.
■■
All Channels: Shows all currently available channels.
■■
Added Channels: Shows all added channels.
■■ * Favorite: Shows all favorite channels.
■■ Programmed: Shows all currently reserved programs.
✎✎ Using the remote control buttons with the Channel List
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.
xxT (Tools): Displays the Channel List option menu. (The Options
menus may differ depending on the situation.)
Use these buttons according to the direction
on screen.
Before your television can begin memorizing the available channels, you
must specify the type of signal source that is connected to the TV (i.e.
an Air or a Cable system).
Use these buttons in a specific feature.
Display Modes (HDMI Input)
Installing batteries (Battery size: AAA)
Optimal resolution
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H / V)
720 x 400
31,469
70,087
28,322
-/+
c
c
640 x 480
35,000
66,667
30,240
-/-
c
c
832 x 624
49,726
74,551
57,284
-/-
c
c
1152 x 870
68,681
75,062
100,000
-/-
640 x 480
31,469
59,940
25,175
-/-
c
c
640 x 480
37,861
72,809
31,500
-/-
c
c
640 x 480
37,500
75,000
31,500
-/-
c
c
Set each channel using the Channel List menu options. Option menu
items may differ depending on the channel status.
■■ Add / Delete: Delete or add a channel to display the channels you
want.
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A gray-colored channel indicates the channel has been deleted.
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favorite menu in
the same manner.
■■ Add to Favorite / Delete from Favorite t: Set channels you
watch frequently as Favorites.
■■ Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching another
channel. Set the current time first to use this function.
✎✎ Only memorized channels can be reserved.
✎✎ Reserved programs will be displayed in the Programmed menu.
✎✎ When a digital channel is selected, press the ► (Next Program)
button to view the digital program. If you select the ENTERE
(Schedule) button on the next program, you can set Timer
Viewing directly.
■■ Channel Name Edit: (analog channels only) Assign your own
channel name.
■■ Select All: Select all the channels in the channel list.
■■ Deselect All: Deselect all the selected channels.
✎✎ You can only select Deselect All when one or more channels
are selected.
■■ Auto Program: Scans for a channel automatically and stores in the
TV.
Auto Program
✎✎ When selecting the Cable TV system: Selects the cable system.
800 x 600
37,879
60,317
40,000
+/+
c
c
48,077
72,188
50,000
+/+
c
c
800 x 600
46,875
75,000
49,500
+/+
c
c
1024 x 768
48,363
60,004
65,000
-/-
c
c
1024 x 768
56,476
70,069
75,000
-/-
c
c
1024 x 768
60,023
75,029
78,750
+/+
c
c
1152 x 864
67,500
75,000
108,000
+/+
74,250
+/+
How to use Edit Name
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. Name the
device connected to the input jacks to make your input source selection
easier.
✎✎ When connecting a DVD to the HDMI IN (STB) port with HDMI
cable, you should set the TV to DVD mode under Edit Name.
Information
You can see detailed information about the connected external device.
OO Channel List → Programmed → t
You can view, modify or delete a show you have reserved to watch.
■■ Change Info: Change a show you have reserved to watch.
■■ Cancel Schedules: Cancel a show you have reserved to watch.
■■ Information: Display a show you have reserved to watch. (You can
also change the reservation Information.)
■■ Select All / Deselect All: You can select or deselect all channels in
the channel list.
How to Stop Auto Programming
Channel Mode
Change the channel mode directly between Added Channels and
Favorite Channels.
✎✎ The Favorite Channels is enabled only when you set Add to
Favorite.
✎✎ NOTE
• Use the remote control within 23 feet from TV.
• Bright light may affect the performance of the remote control.
Avoid use when nearby fluorescent lights or neon signs.
• The Color and shape may vary depending on the model.
If the reception is clear, you do not have to fine tune the channel, as this
is done automatically during the search and store operation. If the signal
is weak or distorted, fine tune the channel manually.
✎✎ Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner.
✎✎ To reset the fine-tuning, select Reset.
Picture Menu
Mode t
1280 x 720
45,000
60,000
1280 x 800
49,702
59,810
83,500
-/+
c
63,981
60,020
108,000
+/+
c
1280 x 1024
79,976
75,025
135,000
+/+
1366 x 768
47,712
59,790
85,500
+/+
1440 x 900
55,935
59,887
106,500
-/+
c
1600 x 900RB
60,000
60,000
108,000
+/+
c
1680 x 1050
65,290
59,954
146,250
-/+
c
1920 x 1080
67,500
60,000
148,500
+/+
c
c
-4-
■■ Digital Clean View: If the broadcast signal received by your TV is
weak, you can activate the Digital Clean View feature to reduce any
static and ghosting that may appear on the screen.
✎✎ When the signal is weak, try other options until the best picture
is displayed.
■■ HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode: Sets the TV to automatically sense and process film
signals from all sources and adjusts the picture for optimum quality.
✎✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎✎ Available in Standard mode only.
Select your preferred picture type.
Picture Reset
Standard.
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal environment.
■■ Movie: Suitable for watching movies in a dark room.
■■ Entertain: Suitable for watching movies and games.
✎✎ Only available when connecting a PC.
Resets your current picture mode to its default settings.
■■ Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
✎✎ When connecting a PC, you can only select Entertain and
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
Your television has several setting options for picture quality control.
✎✎ When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
Picture Options
✎✎ When connecting a PC, you can only make changes to the Color
Tone, Size.
■■ Color Tone: Cool makes the picture bluer (cooler). Warm make the
picture redder (warmer).
■■ Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
✎✎ The menu is deactivated, when the H. 264 (1080p) DTV is being
played.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
screen.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and center of the screen may cause
image retention (screen burn) which are not covered by the
warranty.
Screen Fit: (DTV) Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals
are inputted.
✎✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p
(1280x720)
✎✎ Settings can be adjusted and stored for each external device you
have connected to an input on the TV.
✎✎ Picture Sizes available by Input Source:
Input Source
Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV (1080i), Component (1080i,
1080p), HDMI (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3, Screen Fit
Sound Menu
Mode t
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
Equalizer
(standard sound mode only)
■■ Balance L/R: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■ Reset: Resets the equalizer to its default settings.
DTS TruSurround
(standard sound mode only)
DTS TruSurround is a patented DTS technology that solves the problem
of playing 5.1 multichannel content over two speakers. TruSurround
delivers a compelling, virtual surround sound experience through any
two-speaker playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of many
audio tracks (for example, simultaneous translations of the program into
foreign languages).
✎✎ You can only select a language from among the ones being
broadcasted.
Multi-Track Sound
(analog channels only)
■■ Mono: Choose for channels that are broadcasting in mono or if you
are having difficulty receiving a stereo signal.
■■ Stereo: Choose for channels that are broadcasting in stereo.
■■ SAP: Choose to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Auto Volume
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets
you automatically adjust the volume of the desired channel by lowering
the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the back
of the TV to a digital audio in jack on a receiver or home theater.
■■ Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output (SPDIF) format may differ
depending on the input source.
✎✎ By connecting the TV to a receiver or home theater with Dolby
Digital and 5.1ch speakers and selecting Dolby Digital, you can
maximize your interactive 3D sound experience.
■■ Audio Delay: Lets you correct timing mismatches between the audio
track and the video when you are watching the TV and listening to
digital audio output from the TV through an external device such as
an AV receiver. When you select Audio Delay, a slider appears. Use
the left and right arrow buttons to adjust the slider. Press ENTERE
when done (0ms ~ 250ms).
Setup Menu
Language
Set the menu language.
✎✎ Choose between English, Español, and Français.
❑❑ Setting the Time
Time
✎✎ The current time will appear every time you press the INFO button.
■■ Clock: Setting the clock is for using various timer features of the TV.
✎✎ If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎✎ Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.
DST: (Daylight Saving Time) Switches the DST (Daylight Saving Time)
function on or off.
✎✎ DST and Time Zone function is only available when the Clock
Mode is set to Auto.
■■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes).
✎✎ To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■■ On Time / Off Time: Set the hour, minute, am/pm and Activate /
Inactivate. (To activate the timer with the setting you have chosen, set
to Activate.)
Speaker Select
■■ Volume: Set the desired volume level.
If you are listening to the sound track of a broadcast or movie through an ■■ Contents: When the On Time is activated, you can turn on a specific
channel or play back contents such as photo or audio files.
external receiver, you may hear a sound echo caused by the difference in
decoding speed between the TV’s speakers and the speakers attached
−− TV/USB: Select TV or USB. (Make sure that an USB device is
to your audio receiver. If this occurs, set the TV to External Speaker.
connected to your TV.)
−− Antenna: Displays the current antenna source.
✎✎ When you set Speaker Select to External Speaker, the TV’s
speakers are turned off. You will hear sound through the external
−− Channel: Select the desired channel.
speakers only. When you set Speaker Select to TV Speaker
−− Music/Photo: Select the folder containing MP3/JPEG files on the
both the TV’s speakers and the external speakers are on. You will
USB device.
hear sound through both.
✎✎ The maximum displayed number of files, including sub folders, in
✎✎ When Speaker Select is set to External Speaker, the VOLUME
one folder of USB storage device is 2000.
and MUTE buttons will not operate and the sound settings will
✎✎ The media may not be playing smoothly when using the device
be limited.
lower than USB 2.0.
✎✎ If there is no video signal, both the TV’s speakers and the external ■■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
speakers will be mute.
Manual to set at you convenience. If you select Manual, you can set
up the day you want to activate the timer.
Visual Impaired
(digital channels only)
Adds verbal description to the main audio to help the visually impaired.
Dolby Digital Comp
Set Dolby Digital compression mode.
Sound Reset
■■ Reset All: Resets all sound settings to the factory defaults.
c
1280 x 1024
❑❑ Other Features
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™,
you can enjoy a more realistic gaming experience by selecting the game
menu.
✎✎ Precautions and limitations for game mode
xxTo disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
xxIf you display the TV menu in Game Mode, the screen shakes
slightly.
xxGame Mode is not available when the input source is set to TV.
xxAfter connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
c
c
c
c
-5-
[JH4005_5005-ZX]BN68-06948N-00ENG.indb 1
Programmed
(in Channel List)
c
800 x 600
Clear Scrambled Channel
(analog channels only)
OO Channel List → t
1. Press the ENTERE button.
2. A message will ask Stop Auto Program?. Select Yes by pressing
the ◄ or ► button.
3. Press the ENTERE button.
1366 x 768 1920 x 1080
Fine Tune
Channel List Option Menu
yy c: A channel selected.
yy * : A channel set as a Favorite.
yy ) : A reserved program.
yy ( : A program currently being broadcast.
Antenna (Switch to Cable / Switch to Air t)
❑❑ Other Features
Channel List
Channel Status Display icons
Exit the menu.
-3-
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
✎✎ Press the ENTERE button to stop the Clear Scrambled
Channel.
✎✎ This function is only available in Cable mode.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable
system that exists in your particular area. At this point, the signal
source has been selected.
✎✎ After all the available channels are stored, it starts to remove
scrambled channels. The Auto Program menu then reappears.
✎✎ Press the ENTERE button to stop the channel store during Auto
Program.
VESA DMT
yy Audio
yy Composite (AV)
y Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
❑❑ Memorizing channels
Returns to the previous menu.
MAC
Input Cables (Sold Separately)
y Make sure to pull out the power cord from the outlet before cleaning.
y This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect
Channel List
IBM
yy Power Cord
yy Cable Holder
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
Channel Menu
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Horizontal
Frequency
(KHz)
yy For the best picture and audio quality, connect digital devices using
an HDMI cable.
yy If you connect an external device to the TV that uses an older version
of HDMI, the video and audio may not work. If this occurs, ask the
manufacturer of the device about the HDMI version and, if it is out of
date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture
may not display or a connection error may occur.
TIMES.
Remote Control
Resolution
yy Remote Control & Batteries (AAA x 2)
yy Warranty Card / Regulatory Guide
yy Owner’s Instructions
y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
© 2015 Samsung Electronics Co., Ltd. All rights reserved.
-1-
Mode
Accessories
R
Comuníquese con SAMSUNG WORLD WIDE
Avoid displaying still images (such as jpeg picture files) or still image elements (such
as TV channel logos, panorama or 4:3 image format, stock or news bars at screen
bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of
LED screen, which will affect image quality. To reduce risk of this effect, please follow
below recommendations:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture format menu for
best possible match.
yy Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Connections
✎✎ Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.
Still image warning
4inches
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
Contact SAMSUNG WORLD WIDE
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifications
may be changed without notice.
Installation with a stand.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Getting Started
-6-
-7-
-8-
2015-02-09 오전 10:01:38
POWER
Program Rating Lock
The Program Rating Lock feature automatically locks out programs
that are deemed inappropriate for children. The user must enter a PIN
(personal identification number) before any of the Program Rating Lock
restrictions are set up or changed.
✎✎ Program Rating Lock is not available in HDMI or Component
mode.
✎✎ The default PIN number of a new TV set is “0-0-0-0”.
■■ Program Rating Lock: You can block rated TV Programs.
■■ TV Parental Guidelines: You can block TV programs depending on
their rating. This function allows you to control what your children are
watching.
■■ MPAA Rating: You can block movies depending on their MPAA
rating. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians with
advanced information on which films are appropriate for children.
■■ Canadian English: You can block TV programs depending on their
Anglophone Canadian.
■■ Canadian French: You can block TV programs depending on their
French Canadian rating.
■■ Downloadable U.S. Rating: Parental restriction information can be
used while watching DTV channels.
■■ Change PIN: The Change PIN screen will appear. Choose any 4 digits
for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits
in Confirm New PIN. When the Change PIN screen disappears, press
the OK button. The TV has memorized your new PIN.
✎✎ If you forget the PIN, press the remote-control buttons in the
following sequence, which resets the pin to “0-0-0-0” : POWER
(off) → MUTE → 8 → 2 → 4 → POWER (on)
Caption
(On-Screen Text Messages)
■■ Caption: You can switch the caption function on or off. If captions are
not available, they will not be displayed on the screen.
✎✎ The Caption feature does not work in Component or HDMI
mode.
■■ Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel mode
or when a signal is supplied from an external device to the TV.
(Depending on the broadcasting signal, the Analog Caption function
may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital
channels only) The Digital Captions function works with digital
channels.
✎✎ Service1~6 may not be available in digital caption mode
depending on the broadcast.
■■ Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and Large. The default
is Standard.
Font Style: Options include Default and Styles 0 to 7. The default is
Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan.
You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include
Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent, Solid
and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground
Color, Background Color, Foreground Opacity and Background
Opacity to its default.
✎✎ Digital Caption Options are available only when Default and
Service1~Service6 can be selected in Caption Mode.
✎✎ The Foreground and Background cannot be set to have the same
color.
Boot Logo: Enable/disable displaying the logo while the TV starts up.
P
Application Menu
xxIf a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported in
the Videos.
xxIf the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
xxThe maximum displayed number of files, including sub folders, in
one folder of USB storage device is 1000.
xxThe media may not be playing smoothly when using the device
lower than USB 2.0.
❑❑ Using the Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
MEDIA.P
Eco Solution
■■ Energy Saving: This adjust the brightness of the TV in order to
reduce power consumption. If you select Picture Off, the screen is
turned off, but the sound remains on. Press any button except volume
button to turn on the screen.
■■ No Signal Power Off : Sets how quickly the TV switches to standby
mode, if no picture is being received.
✎✎ Disabled when the PC is in power saving mode.
■■ Auto Power Off: The TV will be automatically turned off when no user
operation is received for 4 hours.
Auto Protection Time
If the screen remains idle with a still image for a certain period of
time defined by the user, the screen saver is activated to prevent the
formation of ghost images on the screen.
Support Menu
Self Diagnosis
■■ Picture Test: Use to check for picture problems. If the problem
continues to occur, check the color pattern.
■■ Sound Test: Use the built-in melody sound to check for sound
problems.
■■ Signal Strength: (digital channels only) An HD channel’s reception
quality is either perfect or the channels are unavailable. Adjust your
antenna to increase signal strength.
■■ Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN. Change the PIN using the Change PIN
option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from www.samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centers and how to download products and software.
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to
the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play (USB)
in Applications menu.
Using the Media Play Menu
1. Press the MENU button. Press the ▲ or ▼ button to select
Applications, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press the
ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,
Settings), then press the ENTERE button.
✎✎ It might not work properly with unlicensed multimedia files.
✎✎ Need-to-Know List before using Media Play (USB)
xxSupported file systems are FAT and NTFS.
xxCertain types of USB Digital camera and audio devices may not
be compatible with this TV.
xxMedia Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
xxBefore connecting your device to the TV, please back up your files
to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
xxA USB device that requires high power (more than 0.5A) may not
be supported.
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
display on the screen.
xxThe maximum supported JPEG resolution is 15360 x 8640 pixels.
xxIf a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
xxThe TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
xxPTP device is not supported.
xxIf an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
xxIf the TV has no input during the time set in Auto Protection
Time, the Screensaver will run.
xxThe power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
xxIf you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
xxIf a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
-9-
Videos
1. Press the ◄/► buttons to select Videos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file
list.
3. Press the ENTERE button or � (Play) button.
--The selected file is displayed on the top with its playing time.
--If video time information is unknown, playing time and the progress
bar are not displayed.
--During video playback, you can search using the ◄/► buttons.
✎✎ In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
yy Supported Subtitle Formats
--External
Name
File extension
MPEG-4 timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Name
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
yy Supported Video Formats
Container
*.mp4
MP4
"*.avi
*.mkv"
"AVI
MKV"
"*.asf
*.wmv"
ASF
"*.ts
*.trp
*.tp
TS
"*.dat
*.mpg
*.mpeg
*.vob"
PS
*.3gp
3GPP
*.flv
flash
formats
Video
Codec
Divx3.11/4.12/
5.x/6.0
H264
VC-1
MJPEG
Divx3.11/4.12/
5.x/6.0
MPEG 1/2/4
H264
MJPEG
Divx 3.11/4.12/
5.x/6.0
MPEG 1/2/4
Frame
rate(fps)
Bit
rate(Mbps)
1920x1080
6~30
20Mbps
1920x1080
1920x1080
640x480
6~30
6~30
6~30
20Mbps
20Mbps
10Mbps
1920x1080
6~30
20Mbps
1920x1080
1920x1080
640x480
6~30
6~30
6~30
20Mbps
20Mbps
10Mbps
1920x1080
6~30
20Mbps
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
MPEG2 -TS
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG1
1920x1080
6~30
20Mbps
MPEG2
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG 1/2/4
H.264
H.264
Sorenson
H.263
1920x1080
1920x1080
1920x1080
6~30
6~30
6~30
20Mbps
20Mbps
20Mbps
1920x1080
6~30
20Mbps
Resolution
Audio
Codec
MP3 /
ADPCM /
AAC
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
yy If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It may take
up to 20 minutes)
yy Set the output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(Go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
Component Connections /
Screen Color
If you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self Diagnosis on
the TV to make sure there are no device issues.
yy Self Diagnosis : MENU → Support → Self Diagnosis → Picture Test
If the test is ok, try making sure:
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have used the
AV Out jack on your video source.
yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,
and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the
blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you
should check before calling for a repair.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go in to “Picture” on user Menu then try
adjusting options mentioned above.
Unwanted Powering off
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No
Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with the TV
still on but, turns it off after a certain period of time so as not to waste energy.
yy Sleep Timer : MENU → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
yy No Signal Power Off : MENU → Setup → Eco Solution → No Signal Power Off
yy Auto Power Off : MENU → Setup → Eco Solution → Auto Power Off
Trouble Powering On
Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote and it
will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check before
making a call to the service department.
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the
power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the
mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have
a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the
signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the
screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.
Cannot find channel
Re-run plug and play.
Poor picture
First, perform the Picture Test and to see if your TV is properly displaying the test image.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as it
did in the store.
If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high
definition) picture quality.
Cable/Satellite subscribers: Try HD channels from the channel line up.
Air/Cable Antenna connection: Try HD channels after performing Auto program.
Many HD channels are up scaled from SD(Standard Definition) contents.
yy Adjust the Cable/Set top box video output resolution to 1080i or 720p.
✎✎
The picture is distorted: macroblock error,
small block, dots, pixelization.
yy Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
yy A weak signal can cause picture distortion. This is not a TV problem.
yy Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing.
If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause color problems or a blank screen.
There is poor color or brightness.
yy Adjust the Picture options in the TV menu. (Go to Picture Mode / Color / Brightness / Sharpness)
yy Adjust the Energy Saving option in the TV menu. (Go to MENU - Setup - Eco Solution - Energy Saving)
yy Try resetting the picture to view the default picture setting. (Go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
yy If the picture size is set to Screen Fit, change it to 16:9.
yy Change the cable/satellite box resolution.
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP /
AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Supports up to WMA7, 8, 9
STD, 9 PRO, and 10 PRO
WMA 9 PRO and WMA 10 PRO
support 5.1 channel.
(LBR mode of WMA Pro is not
supported.)
WMA Lossless is not supported.
There is no sound or the sound is too low at
maximum volume.
Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
The picture is good but there is no sound.
yy If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
yy Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an inappropriate
noise.
yy Check the cable connections. Make sure a video cable is not connected to an audio input.
yy For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
yy Perform the Sound Test as explained above.
The TV turns off automatically.
There is no picture/video.
yy Make sure the AC power cord is securely plugged into the wall outlet and the TV.
yy Make sure the wall outlet is working.
yy Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
yy Ensure the Sleep Timer is set to Off in the Time menu.
yy If your PC is connected to the TV, check your PC power settings.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
yy When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there
is no signal.
Music
1. Press the ◄/► buttons to select Music, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file
list.
(Play) button.
3. Press the ENTERE button or
✎✎ During music playback, you can search using the ◄/► buttons.
✎✎ (REW) and (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 file extensions. Other file extensions
are not displayed, even if they are saved on the same USB device.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file may
cause a sound problem.)
1. Press the ◄/► buttons to select Photos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file
list.
(Play) button.
3. Press the ENTERE button or
✎✎ NOTE
--While a photo list is displayed, press the (Play) / ENTERE
button on the remote control to start the slide show.
--All files in the file list section will be displayed in the slide show.
--During the slide show, files are displayed in order.
--During the slide show, you can adjust the slide show speed using
(REW) or
(FF) button.
--You can move to other file using the ◄/► buttons.
yy Supported Photo Formats
Image
JPEG
Photo
Resolution
Base-line
15360 x 8704
Progressive
1024 x 768
Other Information
To prevent the TV from falling
✎✎ Since the necessary clamps, screws, and string are not supplied,
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the
wall.
For detailed information on installing the wall mount, see the instructions
provided with the wall mount items. Contact a technician for assistance
when installing the wall mount bracket. Samsung Electronics is not
responsible for any damage to the product or injury to yourself or others
if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
Category
Operation
Videos
Title
You can move the other file
directly.
c
Repeat Mode
You can play movie and music files
repeatedly.
c
Picture Size
You can adjust the picture size to
your preference.
c
Picture Mode
You can adjust the picture setting.
c
Sound Mode
You can adjust the sound setting.
c
Subtitle Settings
You can play the video with
Subtitles. This function only works
if the subtitles are the same file
name as the video.
c
Audio Format
You can select the digital audio
output format.
c
Audio Language
You can change the audio
language if the video has more
than one language.
c
Stop Slide
Show /
Start Slide Show
You can start or stop a Slide Show.
c
Slide Show
Speed
You can select the slide show
speed during the slide show.
c
Background
Music
You can set and select
background music when watching
a Slide Show.
c
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full
screen mode.
c
Information
You can see detailed information
about the played file.
c
Music
Photos
c
c
c
c
c
Caution: Pulling, pushing, or climbing onto the TV may
cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause
the TV to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included
Safety Flyer. For added stability, install the anti-fall device for
safety purposes, as follows.
This mode provides optimised condition for watching sports games.
✎✎ When the Sports Mode is On, the picture and sound modes are set
to Stadium automatically.
✎✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
below.
xxWhen purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
xxDo not use screws that do not comply with the VESA standard
screw specifications.
xxDo not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
xxFor wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
xxDo not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
xxSamsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
Product
Family
LED-TV
TV size in
inches
VESA screw hole specs (A
* B) in millimeters
Standard
Screw
32 - 40
200 X 200
M6
46
400 X 400
M8
c
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the wall.
Make sure the screws are firmly fixed into the wall.
2. Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎✎ Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV. Untie the
string before moving the TV.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is
beside the “K” icon.
✎✎ The position and color may differ depending on the model.
Arranging the cables with the Cable holder
Quantity
4
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
Settings
■■ DivX®Video On Demand: Shows the registration code authorized for
the TV. If you connect to the DivX web site and register with 10-digit
registration code, you can download the VOD activation file. Once you
play it using Media Play, the registration is completed.
✎✎ For more information on DivX®VOD, visit “http://vod.divx.com”.
■■ Information: Select to view information on the connected device.
- 11 -
- 12 -
yy Make sure the coaxial cable is connected securely.
yy Please try Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the
menu. There are 3 options. (STD, HRC and IRC)
yy Verify the antenna is positioned correctly.
No Caption on digital channels.
yy Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
yy Some channels may not have caption data.
The picture is distorted: macroblock, error,
small block, dots, pixelization.
yy Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action
movies.
yy A weak signal can cause picture distortion. This is not a TV problem.
Others
Specifications
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
This function is only available for digital channels from an Antenna / RF / Coax connection.
TV is tilted to the right or left side.
Remove the stand base from the TV and reassemble it.
The Channel menu is greyed out
(unavailable).
The Channel menu is only available when you select the TV source.
Your settings are lost after 30 minutes or
every time the TV is turned off.
If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo
mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU →
Setup → Plug & Play → ENTERE.
You have intermittent loss of audio or video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
Model Name
UN32JH4005
UN40JH5005
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design and is not a defect.
Display Resolution
1366 x 768
1920 x 1080
POP (TV’s internal banner ad) appears on
the screen.
Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
Screen Size
32" Class
40" Class
(Diagonal)
(31,5" measured diagonally)
(40,0" measured diagonally)
5Wx2
10 W x 2
Environmental Considerations
dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
Storage and Maintenance
✎✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to
Operating Temperature
50°F to 104°F (10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F (-20°C to 45°C )
Storage Humidity
5% to 95%, non-condensing
Sound
Output
Dimensions (W x H x D)
Body
With stand
prevent scratches.
29,0 X 17,4 X 3,6 inches
36,5 X 21,5 X 3,6 inches
(738,8 x 444,2 x 93,2 (mm))
(928,6 x 548,6 x 93,3 (mm))
29,0 X 19,6 X 7,5 inches
36,5 X 23,9 X 8,9 inches
(738,8 x 498,3 x 191,7 (mm))
(928,6 x 607,2 x 227,6 (mm))
Weight
yy Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
yy Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For
example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
yy Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
Media Play - Additional Functions
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
No Picture, No Video
The TV will not turn on.
Playing Multiple Files
■■ Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎✎ NOTE
--The c mark appears to the left of the selected files.
--To cancel a selection, press the Yellow button again.
--To deselect all selected files, press the TOOLS button and select
Deselect All.
3. Press the TOOLS button, and then select Play Selected Contents.
■■ Playing the video/music/photo file group
1. While a file list is displayed, move to any file in desired group.
2. Press the TOOLS button, and then select Play Folder.
■■ Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
- 10 -
The picture is black and white.
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient features
like the Energy Saving feature. If you follow below step with your remote, you can turn these features off or on.
yy Energy Saving : MENU → Setup → Eco Solution → Energy Saving
Audio Decoder
Sports Mode
MP3
When changing channels, the picture
freezes or is distorted or delayed.
Flickering and Dimming
Video Decoder
Securing the TV to the Wall
❑❑ Using the Sports Mode
MP3
If the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.
com, then click on Support, or call Samsung customer service.
Possible Solution
the content or the container.
xxSound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
xxIf the Index Table is in error, the Seek (Jump) function is not supported.
xxThe menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
xxVideo content can not be played, if there are many contents in one file.
MP3 /
AC3 /
LPCM /
ADPCM /
DTS
MP3 /
AC3 /
LPCM /
ADPCM
/ WMA /
WMA Pro
AC3 /
AAC /
MP3 /
DD+
AC3 /
MPEG /
LPCM /
AAC
Troubleshooting
Problem
Other Restrictions
CMYK and YCCK Color space JPEGs are not supported.
Photos
--Internal
File
Extension
Other Restrictions
xxVideo content will not play, or not play correctly, if there is an error in
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or electric
shock.
Clean the product with a soft cloth
dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene,
thinners) or a cleaning agent.
License
This DivX Certified® device has passed rigorous testing to
ensure it plays DivX® video.
To play purchased DivX movies, first register your device at
vod.divx.com. Find your registration code in the DivX VOD
section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
DivX®, DivX Certified® and associated logos are
trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
This device supports DivX Plus Streaming® for enjoying
HD movies and TV shows with advanced features (multilanguage subtitles, multiple audio tracks, chapters, smooth
FF/RW, etc.) streamed to your device.
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has
a grounding issue. Replace the Component video cables with an HDMI connection.
The picture will not display in full screen.
yy HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
yy Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
yy Adjust the picture size option on your external device or change the TV to full screen.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The remote control does not work.
yy Replace the remote control batteries with correct polarity (+/–).
yy Clean the transmission window located on the top of the remote control.
yy Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
Manufactured under a license from U.S. Patent No’s:
5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616,
7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195,
7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol,
and DTS and the Symbol together are registered
trademarks & DTS Premium Sound is a trademark of
DTS, Inc.
©2012 DTS, Inc. All Rights Reserved.
A “Mode Not Supported” message
appears.
Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
Caption on the TV menu is greyed out.
yy You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component.
yy Caption must be activated on the external device.
There is a plastic smell from the TV.
This smell is normal and will dissipate over time.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://
opensource.samsung.com) Open Source License Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact
Samsung via Email (oss.request@samsung.com).
 This product uses some software programs which are distributed under the
Independent JPEG Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and others All
rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, provided that the above copyright notice(s) and
this permission notice appear in all copies of the Software and that both the above
copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE
FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used
in advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their
respective owners.
Manufactured under a license from U.S. Patent No’s:
6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452,
5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907,
8,050,434, 7,720,240, 7,031,474, 7,907,736 and
7,764,802. DTS, the Symbol, and DTS and the Symbol
together are registered trademarks & DTS Studio Sound is
a trademark of DTS, Inc.
©2012 DTS, Inc. All Rights Reserved.
Without Stand
11,0 lbs (5,0 kg)
18,5 lbs (8,4 kg)
With Stand
12,3 lbs (5,6 kg)
22,9 lbs (10,4 kg)
Model Name
UN46JH5005
Display Resolution
1920 x 1080
Screen Size
46" Class
(Diagonal)
(45,9" measured diagonally)
Sound
Output
10 W x 2
Dimensions (W x H x D)
41,7 X 24,5 X 3,7 inches
Body
(1060,0 x 622,5 x 96.2 (mm))
41,7 X 26,8 X 8,9 inches
With stand
(1060,0 x 681.1 x 227,6 (mm))
Weight
Without Stand
24,9 lbs (11,3 kg)
With Stand
29,3 lbs (13,3 kg)
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.
✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
- 13 -
[JH4005_5005-ZX]BN68-06948N-00ENG.indb 2
- 14-
- 15 -
- 16 -
2015-02-09 오전 10:01:40