Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 1
2015/7/13 19:21:39
Features
AA of your new air conditioner
Cool Summer Offer
On those hot sweltering summer days and long restless
nights, there is no better escape from the heat than the
cool comforts of home. Your new air conditioner brings an
end to exhausting hot summer days and lets you rest. Beat
the heat with your own air conditioner this summer.
Cost Efficient System
Your new air conditioner not only provides maximum
cooling power in the summer, but also can be an efficient
heating method in the winter with the advanced “Heat
pump” system. “Heat pump” system is 3 times more
efficient compare to the other electrical heating appliance,
so you can further reduce its running cost. Now, meet yearround needs with one air conditioner.
Look for Everywhere
The elegant and harmonious design gives priority
to the esthetics of your space and complements any
of your existing interior décor. With its soft color and
rounded-edge shape, the new air conditioner adds class
to any room. Enjoy what your air conditioner offers both
functionally and esthetically.
function
function allows you to set a comfortable
sleep temperature while saving energy and having sound
sleep.
Virus Doctor function
Virus Doctor function generates hydrogen(H) and
oxygen(O2) to attack undesirable air contaminants such as
bacteria, pollen, and odor. It makes you breathe better as
if you are staying around waterfalls, ocean surf, rivers and
mountains.
Contents
USING PARTS
Safety precautions . ........................................................................ 3
Checking before use ..................................................................... 6
Checking the name of the parts .............................................. 7
Checking the remote controller . ............................................. 8
Basic function ................................................................................ 10
Adjusting the air flow direction ............................................ 12
Using the Turbo function ......................................................... 12
mode . .................................................................. 13
Setting the On/Off timer .......................................................... 14
Using the Smart Saver function ............................................ 15
Using the Virus Doctor function .......................................... 16
Using the Auto Clean function .............................................. 16
Using the Quiet function . ........................................................ 17
Using the d'light Cool function ............................................. 17
Cleaning the air conditioner ................................................... 18
Maintaining the air conditioner ............................................ 20
Troubleshooting . ......................................................................... 21
INSTALLATION PARTS
Safety precautions . .....................................................................
Choosing the installation location . .....................................
Accessories .....................................................................................
Fixing the installation plate .....................................................
Connecting the assembly cable ...........................................
Installing and connecting the assembly
pipe of the indoor unit ..............................................................
Purging the indoor unit ...........................................................
Cutting or extending the pipe ...............................................
Installing and connecting the
drain hose of the indoor unit .................................................
Changing direction of the drain hose ................................
Installing and connecting the
Purging the connected pipes ................................................
Performing the gas leak tests . ...............................................
Fixing the indoor unit in place ...............................................
Fixing the outdoor unit in place ...........................................
Final check and trial operation ..............................................
Pump down procedure
(when removing the product) ...............................................
How to connect your extended power cables . .............
23
24
27
28
29
31
32
32
33
34
35
38
39
39
40
40
41
2
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 2
2015/7/13 19:21:39
USING PARTS
Safety
AA precautions
Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and
efficiently operate the extensive features and functions of your new appliance.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Unplug the power plug from the
wall socket.
Do NOT attempt.
Do NOT disassemble.
ENGLISH
Because the following operating instructions cover various models, the characteristics of your air conditioner may differ slightly
from those described in this manual. If you have any questions, call your nearest contact center or find help and information
online at www.samsung.com.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
Plug the power cord into a wall socket with the power specifications of the product or higher and use the socket for this
appliance only. In addition, do not use an extension cord.
 Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
 Do not use an electric transformer. It may result in electric shock or fire.
 If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified technician or service company.
 Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
 Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed.
 Failing to do so may result in electric shock or fire.
Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty
location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where
gas may leak.
 This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where it could fall.
 If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
 Failure to do so may result in electric shock, fire, an explosion, or other problems with the product.
 Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and
national codes.
FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
 Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
 Failing to do so may result in abnormal vibrations, noise, or problems with the product.
Install the draining hose properly so that water is drained correctly.
 Failing to do so may result in water overflowing and property damage.
When installing the outdoor unit, make sure to connect the draining hose so that draining is performed correctly.
 The water generated during the heating operation by the outdoor unit may overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death or property damage.
3
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 3
2015/7/13 19:21:39
Safety precautions
AA
FOR POWER SUPPLY
WARNING
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth
on a regular basis.
 Unplug the power plug and clean it with a dry cloth.
 Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
 If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and
this may result in electric shock or fire.
When the appliance or power plug or power cord is damaged, contact your nearest service center.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose wall
socket.
 This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
 Unplug the power plug by holding the plug.
 Failing to do so may result in electric shock or fire.
Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a
metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord
into the space behind the appliance.
 This may result in electric shock or fire.
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the
circuit breaker.
 Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service center.
 Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact
your nearest service center.
 Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do
not touch the appliance or power cord.
 Do not use a ventilating fan.
 A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
 Failing to do so may result in problems with the product, water leakage, electric shock, or fire.
 A delivery service for the product is not provided. If you reinstall the product in another location, additional construction
expenses and an installation fee will be charged.
 Especially, when you wish to install the product in an unusual location such as in an industrial area or near the seaside where it is
exposed to the salt in the air, please contact your nearest service center.
Do not touch the power plug or the circuit breaker with wet hands.
 This may result in electric shock.
Do not unplug the power plug or turn the air conditioner off with the circuit breaker while it is operating.
 Plugging the power plug into the wall outlet or turning the air conditioner on from the circuit breaker may cause a spark and
result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well out of the reach of children, as packaging materials
can be dangerous to children.
 If a child places a bag over its head, it may result in suffocation.
Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating.
Take special care that children do not injure themselves by inserting their fingers into the product.
Do not touch the air flow blade with your hands or fingers during the heating operation.
 This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the air inlet/outlet of the air conditioner.
 Take special care that children do not injure themselves by inserting their fingers into the product.
Do not strike or pull the air conditioner with excessive force.
 This may result in fire, injury, or problems with the product.
4
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 4
2015/7/13 19:21:39
FOR USING
WARNING
ENGLISH
Do not place an object near the outdoor unit that allows children to climb onto the machine.
 This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people.
 Since this may be dangerous due to a lack of oxygen, Open a window at least once an hour.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and
turning the circuit breaker off and then contact your nearest service center.
 Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
 Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
 Failing to do so may result in electric shock, fire, problems with the product, or injury.
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
 Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a year.
 Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is measured according to ISO standard for
energy efficiency.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes,
chemicals, metal objects, etc.) on the appliance.
 This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
 This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
 As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not drink the water from the air conditioner.
 The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not disassemble the remote controller.
Do not touch the pipes connected with the product.
 This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals, plants or cosmetics, or for any other
unusual purposes.
 This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from the air conditioner for long periods of time.
 This may result in harm to humans, animals or plants.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the
appliance.
 This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
 Failing to do so may result in electric shock or fire.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor unit since it has sharp edges.
 To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
 For cleaning inside the appliance, contact your nearest service center.
 When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the air conditioner’ section.
 Failure to do may result in damage, electric shock or fire.
5
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 5
2015/7/13 19:21:39
Checking
before use
AA
Operation ranges
The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the
table for efficient use.
Mode
Cooling
Dry
Indoor
Outdoor temtemperature
perature
-10˚C~46˚C
16˚C~32˚C
16˚C~46˚C
-10˚C~46˚C
18˚C~32˚C
16˚C~46˚C
Indoor humidity
Remark
Relative humidity 80% or less
-
ASV18/24
ASV09/12
ASV18/24
ASV09/12
 If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
Maintaining your air conditioner
Internal protections via the unit control system
 This internal protection operates if an internal fault occurs in the air conditioner.
Type
Description
Anti-protection of
internal battery
The compressor will be off to protect internal battery when the air conditioner operates
in Cool mode.
Protect compressor
The air conditioner does not start operating immediately to protect the compressor of
the outdoor unit after it has been started.
•
•
•
We suggest that the temperature should be set between 21°C - 23°C to reduce energy consumption.
The air conditioner should be turned off in an unoccupied areas.
The heat may be caused by the excessive lighting or equipment that is turned on unnecessarily.
You should reduce heat in the air-conditioned area.
6
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 6
2015/7/13 19:21:39
Checking
the name of the parts
AA
Your air conditioner may slightly look different from illustration shown above depending on your model.
Main parts
ENGLISH
Room
temperature
sensor
Air intake
Air filter(under the panel)
Air flow blade
(up and down)
Blade pin lever
Air flow blade (left and right)
Display
Virus Doctor indicator
Timer/Auto clean indicator
Operation indicator
Power
button
Remote controller receiver
7
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 7
2015/7/13 19:21:40
Checking the remote controller
AA
• Point the remote controller towards the remote controller receiver of the indoor unit.
• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.
Remote controller buttons
Virus Doctor
Set the Virus Doctor function on/off.
Smart Saver
Less energy usage makes your space
cool between the temperature range of
24°C~30°C.
Turbo
Operate in auto fan speed to cool quickly.
Increase/Decrease the temperature by 1˚C.
Temp/Humi
(Has no this funtion.)
Turn on/off the air conditioner.
Mode
Set one of the 4 operating modes
(see pages 10~11 for instructions).
Quiet
Reduce noise generated from an indoor
unit during operation.
Air swing
Activate/Deactivate air flow blade
movement automatically up and down.
Fan

Temp + -
Power

Remote controller display
Adjust how much air flows through the air
conditioner with the 4 different fan speeds
such as Auto/Low/Medium/High.
d'light Cool
Auto Clean
Auto clean function – Dry inside of the
indoor unit to get rid of odor.
On Timer
Set the
Set /Cancel
Set the On Timer on.
Cancel the timer/
Set the Off Timer on.
2ndF
Off Timer
mode on.
mode .
Switch the function of the button on the
remote controller.
Filter Reset
Reset the Filter Clean reminder.
Beep off
To silence the beep sound when pressing the button.
Display off
Has no this function.
• W
hen you press [2ndF] button, the
indicator will be displayed on the remote controller and you can change
the functions on the remote controller as listed below.
Auto Clean  Filter Reset, Temp/Humi  Beep Off, good’ sleep  Display Off function.
If you select the function under the button while the function of the button is switched by 2ndF button,
the 2ndF function is canceled.
8
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 8
2015/7/13 19:21:40
Remote controller display
2ndF indicator
Set temperature indicator
On Timer indicator
Off Timer indicator
indicador
ENGLISH
Quiet indicator
Turbo indicator
Virus Doctor indicator
Smart Saver indicator
d'light Cool indicator
Operation mode indicator
Low battery indicator
Transmit indicator
Air swing indicator
Fan speed indicator
Auto (Turbo)
Low
Medium
High
As to ASV Series, don’t operate the air conditioner when the remote controller is set to Heat mode).
Heat mode can be selected AQV Series.
Battery changing time
When the battery is exhausted, ( ) will be displayed in the remote controller display. When the icon appears, change the
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow
2. Insert two AAA batteries.
indicates on the rear side of the Check and match the “+” and “-”
remote controller and pull up.
signs accordingly. Make sure you
have inserted the batteries in
correct position.
3. Close the cover by place it back to its
original position.
You should hear click sound when the cover is
locked properly.
• T he signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps
are in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
9
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 9
2015/7/13 19:21:40
AA function
Basic
Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature
detected by the room temperature.
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
• If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness.
• Quiet mode(
, ) makes the noise quieter during operating the indoor unit in the Cool mode.
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air.
Dry mode makes the air feel refreshing in a humid climate.
To maximize the dehumidification capacity during the Dry operation, the air conditioner could be
operating at lower or higher temperature than the remote controller set temperature.
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
10
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 10
2015/7/13 19:21:40
Press the
button to turn on the air conditioner.
Press the
button to set the operating mode.
ENGLISH
• Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, and Fan .
Press the
button to set the desired fan speed.
Auto
(Auto)
Cool
(Auto),
Dry
(Auto)
Fan
Press the
(Low),
(Low),
(Med),
(Med),
(High)
(High)
button to adjust the temperature.
Auto
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Cool
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Dry
You can adjust the desired temperature by 1°C within the range of 18°C~30°C.
Fan
Temperature adjustment is not possible.
• Air flow can be adjusted manually.(see page 12 for instructions.)
11
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 11
2015/7/13 19:21:41
Adjusting
the air flow direction
AA
Air flow can be directed to your desired position.
Vertical air flow
Air flow blades move up and down.
Press the Air swing

Air swing indicator will be on and air flow blades move up and down continuously to
button on the remote controller.
circulate the air.

Press the Air swing
button on the remote controller again, to keep the air flow
direction in a constant position.
Horizontal air flow
Make sure one of the blade pin lever that stick out of the air flow blades are not broken.
Move the blade pin lever left or right to keep the air flow direction in a constant
position you prefer.
• B e extremely careful with your fingers while adjusting the Horizontal
air flow direction.
There is a potential risk of personal injury when the unit is
mishandled.
Blade pin lever
Using the Turbo function
Turbo function will be helpful to cool your room quickly and effectively.
Press the Turbo button on the remote controller during Cool mode.

Turbo indicator appears on the remote controller display and the air conditioner
operates in Turbo function for 30 minutes.
Press the Turbo button once again.
Cancel
• T urbo function is only available in Cool mode.
• If you press the Mode button while the Turbo function is on, it will cancel
the function.
• Temperature/Fan speed cannot be adjusted while using this function.
12
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 12
2015/7/13 19:21:42
AA
mode
For a comfortable sleep, the air conditioner will operate it Fall asleep  Sound sleep  Wake up from
mode.
When the air conditioner is on and in cool mode
button on the remote controller.

indicator appears and Off timer indicator starts blinking on the remote
controller display.
2. Press the
ENGLISH
1. Press the
button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
Operating hour can be set from minimum 30 minutes to maximum
12 hours.
Default operation hour is set to 8 hours.
3. Press the Set/Cancel button to active it on.
Off timer indicator stops blinking and reserved time will be displayed for 3 seconds.
Then the air conditioner operates in good’sleep(Cool) mode.
If you don’t press Set/Cancel button within 10 seconds after pressing the
button, the air conditioner will return to previous status. Check Off
timer indicator and
indicator on the indoor unit.
Cancel
Press the Set/Cancel button once again.
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the
mode.
However, I f you select
mode while heating operation is on,
you can adjust fan speed. (AQmodel)
Air flow direction will be adjusted automatically according to the
mode.
However, if you select
mode while heating operation is on,
you can adjust air flow direction. (AQmodel)
Temperature and fan speed changes in
mode
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up from
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• S et Off timer in
mode over 5 hours. You fell disturbed sleep if the
is set too short or long
because the default is set to 8-hour-operation.
• If the
mode is set less than 4 hours, the operation will stop at the same time.
If the
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
• Recommended set temperature is between 25˚C~27˚C for cooling.
13
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 13
2015/7/13 19:21:42
Setting
the On/Off timer
AA
You can set the air conditioner to turn on/off automatically at desired time.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on
Setting On timer
1. Press the On Timer/Off Timer button.
On/Off timer indicator will blink on the remote controller display.
2. Press the On Timer/Off Timer button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 24 hours.
Operating hour can be set from minimum 30 minutes to maximum 24 hours.
3. Press the Set/Cancel button to active it on.
On timer indicator stops blinking and reserved time will be displayed for
3 seconds.
If you don’t press Set/Cancel button within 10 seconds after selecting the time the
air conditioner will return to previous status. Check On timer or Off timer indicator
and
indicator on the indoor unit.
Setting Off timer
Cancel
Press the Set/Cancel button.
Additional options available in On timer mode
You can select from Auto/Cool/Dry/Fan mode.
You can adjust the temperature in Auto/Cool/Dry mode.
• O
nly the latest setting timer will be applied between the On Timer/Off Timer
and
Off timer functions.
• After setting the timer, the set time will be displayed for 3 seconds before it
disappears.
14
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 14
2015/7/13 19:21:43
Combining On Timer and Off Timer
If the air conditioner is on
If the air conditioner is off
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will operate On timer after 3 hours
from the moment you have set the timer.
Your air conditioner will remain on for 2 hours and then
turn off automatically.
ENGLISH
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will operate the Off timer after
1 hour from the moment you have set the timer.
Your air conditioner will turn on after 2 hours.
• On timer and Off timer setting time should be different from each other.
• Press the Set/Cancel button on the remote controller while timer combination is on.
Both of the On and Off timer will be canceled and the indicator will disappear.
Using the Smart Saver function
This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode.
Press the Smart Saver button on the remote controller while the air conditioner is
operating in Cool mode.

Smart Saver indicator and air swing indicator appears automatically on the remote

If the current set temperature is lower than 24°C, it will automatically raise to 24°C.
controller display.
The air flow blades move up and down.
Cancel
Press the Smart Saver button once again.
• S mart Saver function is only available in Cool mode.
• When Smart Saver function is activated, temperature range will be limited to
24°C~30°C.
• If the desired temperature is lower than 24°C, turn off the Smart Saver function
by pressing the Smart Saver button again.
• Temperature/Fan speed can also be adjusted (see page 11 for instructions).
• Air flow can be adjusted manually (see page 12 for instructions).
• If you press the Mode button while the Smart Saver function is on, it will cancel
the function.
15
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 15
2015/7/13 19:21:43
Using
AA the Virus Doctor function
Virus Doctor generates hydrogen(H) and oxygen(O2) to remove a polluted substance and decomposition of such harmful
particles. It makes you breathe better as if you are staying around waterfalls, ocean surf, rivers and mountains.
Press the

button on the remote controller.
indicator will appears on the remote controller display and the air conditioner
generates Virus Doctor.
Cancel
Press the
• The
button once again.
function can be selected whether the air conditioner is on/off.
Using the Auto Clean function
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
When the air conditioner is turned off,
The Auto clean indicator on the indoor unit display appears and the Auto clean function
runs.
When the air conditioner is turned on,
After stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto clean function runs.
uto Clean time can vary, depending on the previously used mode.
※A
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto, Fan mode : approximately 15 minutes.
Cancel
Press the Auto Clean button once again.
• W
hen the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
16
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 16
2015/7/13 19:21:43
Using
AA the Quiet function
You can reduce the noise generated from an indoor unit.
Press the Quiet button on the remote controller while the air conditioner is operating
in Cool mode.

Quiet indicator appears on the remote controller display.

The indoor unit will operate more quietly.
ENGLISH
Press the Quiet button once again.
Cancel
• If using a multi system, this function will work only when the Quiet function is
set on all operated indoor units.
• For 9K&12K models,Quiet function will be work after 2 minutes.
Using the d'light Cool function
Press the d'light Cool button while the air conditioner is operating in Cool mode,
Fan speed is set to Auto, and air flow blades move up and down continuously.
Cancel
Press the d'light Cool button once again.
• Press the d'light Cool button once again,Fan speed remain Auto speed.
• The air conditioner has no d'light Cool function .
17
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 17
2015/7/13 19:21:44
Cleaning
the air conditioner
AA
• Make sure the power is turned off and unplugged from
the wall socket when cleaning the air conditioner.
Cleaning the indoor unit

Wipe the surface of the unit with a slightly wet or dry cloth when
needed.
• C
ontact the service center when you clean the indoor unit
heat exchanger because it needs to be disassembled.
• D
o not clean the display using alkaline detergent.
• Do not use sulfuric acid, hydrochloric acid, organic solvents
(such as thinner, kerosene and acetone etc.) to clean the
surface of the product or put any stickers on it. They may
damage the surface of the air conditioner.
Cleaning the outdoor unit heat exchanger

When dust accumulates on the heat exchanger, it may decrease cooling
performance. Therefore, clean it regularly.

Spray water to clean the dust.
• If it is difficult to clean the outdoor unit heat exchanger on
your own, contact service center.
Heat exchanger
(Illustration may differ slightly
depending on the models)
• B e careful with the sharp edges on the outdoor unit heat
exchanger.
Opening the panel
Tightly grab top of the front panel and pull it down to open.
Then slightly lift the panel up.
18
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 18
2015/7/13 19:21:44
Removing the Air filter
ENGLISH
Grab the handle and lift it up. Then, pull the Air filter towards you
and slide it down.
Air filter
Cleaning the air filter
Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing.
Open the panel and put the Air filter out.
Clean the Air filter with a vacuum cleaner or soft brush.
If dust is too heavy, rinse it with running water.
Insert the Air filter back in its original position
and close the front panel.
Dry the Air filter in a ventilated area.
• C
lean the Air filter every 2 weeks or when the filter clean reminder lights up. Cleaning term may differ depending
on the usage and environmental conditions. In dusty area, clean it once a week.
• If you turn off the air conditioner by pressing Power button, the filter clean reminder will be turned off.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs, re-clean and dry it in a
well-ventilated area.
19
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 19
2015/7/13 19:21:45
Maintaining
the air conditioner
AA
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug.
There may be internal damage if moisture is left in components.
2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode
for 3 to 4 hours. This helps remove odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Description
Clean the air filter (1)
Indoor
unit
Every 2
weeks
Every 3
months
Every 4
months
Once a year

Clean the condensate drain pan (2)
Clean the condensate drain pipe (2)


Replace the remote controller batteries (1)
Clean the heat exchanger on the outside of the unit (2)
Outdoor
unit


Clean the heat exchanger on the inside of the unit (2)

Clean the electric components with jets of air (2)

Verify that all the electric components are firmly
tightened (2)

Clean the fan (2)

Verify that all the fan assembly is firmly tightened (2)

Clean the condensate drain pan (2)

 : This check mark requires checking the indoor/outdoor unit periodically, following to the description to maintain the
air conditioner properly.
(1) The described operations should be performed more frequently if the area of installation is very dusty.
(2) These operations must always be performed by qualified personnel. For more detailed information, see the
installation part in the manual.
20
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 20
2015/7/13 19:21:45
Troubleshooting
AA
Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.
SOLUTION
The air conditioner does
not work at all.
• Check power status and then operate the air conditioner again.
• Plug in or switch on the circuit breaker and then operate the air conditioner again.
• Check if you have set the Off Timer. Operate the air conditioner again by pressing the
Power button.
The temperature
adjustment is not working.
• C
heck if you have selected Fan/Turbo mode. In these modes, desired temperature is set to
auto and you cannot adjust the temperature.
Cool/Warm air does
not come out of the air
conditioner.
• C
heck if the set temperature is higher(during Cool mode) than the current temperature.
Press the Temp + or - button on the remote controller to change the set temperature.
• Check if the Air filter is blocked by dirt. If there is a lot of dust on the Air filter, cooling
performance may decrease. Clean them frequently.
• Check if the outdoor unit is covered or installed near the obstacle. Take the cover off and
take the obstacle away.
• If you want to operate the air conditioner in the sunlight, cover the outdoor unit using
curtains or etc.
• Check if the air conditioner is operating in De-ice mode. When the ice formed in winter
or the outdoor temperature is too low, the air conditioner operates in De-ice mode
automatically. In De-ice mode, indoor fan stops and cool air does not come out.
• If the doors or windows are open, it may cause bad cooling performance.
Close the doors and windows.
• Check if the air conditioner has just been turned on after stopping cooling operation. In
this case, just a fan will run to protect the outdoor unit compressor.
• Check if the pipe length is too long. When the pipe length exceeds maximum allowable
pipe length, cooling performance may decrease.
Air flow adjustment is not
working.
• C
heck if you have selected Auto/Dry/
mode. In these modes, desired
temperature is set to auto and you cannot adjust the temperature.
Fan speed adjustment is
not working.
• Check if you have selected Auto/Dry/Turbo/
is set to Auto and you cannot adjust the fan speed.
Remote controller is not
working.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller sensor.
• Check that there are strong lighting apparatus near the air conditioner. Strong light which
comes from fluorescent bulbs or neon signs may interrupt the electric waves.
Timer function does not
set.
• C
heck if you press the Set/Cancel button on the remote controller after you have set the
time.
The indicator is blinking
continuously.
• P ress the Power button or disconnect the power plug/switch off the auxiliary power
switch.
If the indicator is still blinking, contact the service center.
Odors permeate in the
room during operation.
• C
heck if the appliance is running in a smoky area. Ventilate the room or operate the air
conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air
conditioner.)
ENGLISH
PROBLEM
mode. In these mode, fan speed
21
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 21
2015/7/13 19:21:45
Troubleshooting
PROBLEM
SOLUTION
Error is indicated.
•When an indoor unit indicator blinks, contact the nearest service center.
Noise is generated.
• D
epending on the status of the air conditioner usage, noise can be heard when refrigerant
flow movement changes. It is normal.
Water is dropping from
the outdoor unit piping
connection.
• Water may be generated because of the temperature difference. It is normal.
22
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 22
2015/7/13 19:21:45
INSTALLATION PARTS
※ In this manual, you may find model names written in simplified forms as indicated in following table.
Included Models
ASV 09P, ASV12P, ASV 18P, ASV 24P
ASV 09P
ASV12P
ASV18P
ASV24P
Remark
Grouping was done by series.
Grouping was done by capacity.
ENGLISH
Model Names
ASVP
09
12
18
24
Safety precautions
Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.
• Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.
• Verify that installation and testing operations are performed by qualified personnel.
• Verify that the air conditioner is not installed in an easily accessible area.
General information
 Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order
to be able to use it as reference after installation.
For maximum safety, installers should always carefully read the following warnings.
Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air
conditioner is sold or transferred.
This manual explains how to install an indoor unit with a split system with two SAMSUNG units.
The use of other types of units with different control systems may damage the units and invalidate the warranty.
The manufacturer shall not be responsible for damages arising from the use of non compliant units.
The air conditioner is compliant with the requirements of the Low Voltage Directive (72/23/EEC),
the EMC Directive (89/336/EEC) and the Directive on pressurized equipment (97/23/EEC).
The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection
of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate
the warranty.

T he air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable
to be installed in areas used for laundry.
Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.
In order to prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact
SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations
should be performed by qualified personnel only.
The unit contains moving parts, which should always be kept out of the reach of children.
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may
cause electric shocks or fires.
Do not place containers with liquids or other objects on the unit.
All the materials used for the manufacture and packaging of the air conditioner are recyclable.
The packing material and exhaust batteries of the remote controller(optional) must be disposed of in accordance with
current laws.
The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air
conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and
safely.
23
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 23
2015/7/13 19:21:45
Safety precautions
Installing the unit
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant tubes.
 Upon receipt, inspect the product to verify that it has not been damaged during transport.
If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the
installer or the authorized technician has collected the material from the retailer.)
 After completing the installation, always carry out a functional test and provide the instructions on how to operate the air
conditioner to the user.
 Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to
avoid the occurrence of fires, explosions or injuries.
 To prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable
to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility
from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that
can be disassembled in conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the
unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation
won’t be considered in-warranty and charged to end user.
Power supply line, fuse or circuit breaker
 Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
 Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is
sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring
diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric
specifications and with the instructions provided in the wiring scheme.
Always verify that all connections comply with the standards applicable to the installation of air conditioners.
Choosing the installation location
Indoor unit








Where airflow is not blocked
Where cool air can be distributed throughout the room
Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the
installation diagram
Wall that prevents vibration and is strong enough to hold the product weight
Out of the direct sunlight
1m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well)
A place where the air filter can be replaced easily
24
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 24
2015/7/13 19:21:45
Outdoor Unit

Where it is not exposed to strong wind
Well ventilated and dustless places
 Out of the direct sunlight and rain
 Where neighbors are not annoyed by operation sound or hot air
 Solid wall or support that prevents vibration and is strong enough to hold the product weight
 Where there is no risk of flammable gas leakage
 When installing the unit at a high place be sure to fix the unit legs
 3m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
 Install the unit horizontally
 Place where drained water does not become any problem.
 Place with no plants (especially climbing plants) and where small animal can not access.

ENGLISH
• Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Salty environment such as seaside areas
- Where sulfide gas exists
- Other special atmosphere areas
Observe the clearances and maximum lengths as seen in the picture below when installing the air conditioner.
300mm or more
125mm
or more
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer to
page 39 for further details.
125mm
or more
You can select the direction of
draining
(left or right).
'L' m as maximum pipe length
and 3 m as minimum pipe length
(It will reduce noise and vibration)
' L ' meters maximum
total pipe length
' H ' meters maximum total
pipe length
Model
09/12
18/24
L
15
30
H
7
15
Make at least one round: It will reduce noise and vibration
 The appearance of the unit may be different from the diagram depending on the model.
25
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 25
2015/7/13 19:21:46
Choosing the installation location
Space Requirements for Outdoor Unit
When installing 1 outdoor unit
 Figure Description
Top view
Side view
Air intake
Air outlet
Air intake
Air outlet

,
Air flow direction.
(Unit : mm)
1500 or more
 When 3 sides of the outdoor unit are
blocked by the wall
300 or more
 When the air outlet is towards the
wall
300 or more
 When the air outlet is opposite the
wall
150 or more
 The upper part of the outdoor unit
and the air outlet is opposite the
wall
 When the walls are blocking front
and the rear side of the outdoor unit
300 or
more
300 or more
1500 or
more
500 or more
2000 or more
1500 or more
 The upper part of the outdoor unit
and the air outlet is towards the wall
600 or more
When installing more than 1 outdoor unit
(Unit : mm)
300 or more
 When 3 sides of the outdoor unit are blocked by the wall
1500 or more
 When the air outlet is towards the wall
300 or more
600 or more
600 or more
600 or more
26
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 26
2015/7/13 19:21:46
500 or more
1500 or
more
600 or more
300 or more
 When front and rear side of the outdoor unit is towards the wall
1500 or
more
600 or
more
3000 or
more
3000 or
more
ENGLISH
600 or more
300 or more
500 or more
(Unit : mm)
 When the upper part of the outdoor unit and
the air outlet is opposite the wall
300 or
more
 When the walls are blocking front and the rear side of the outdoor
units
200 or
more
• If installation is done in inappropriate space, unit may generate sound and cause bad effect on the product.
• Installation must be done in level and in a place where vibration will not cause any effect.
Accessories
The following accessories are supplied with the air conditioner:
• The number of each accessory is indicated in parentheses.
Accessories in the indoor unit case
Installation Plate (1)
Remote
controller (1)
Batteries for
Remote controller (2)
User’s & Installation
Manual (1)
Accessories in the outdoor unit case
4-wire
3-wire
2-wire
Assembly Cable (1) Assembly Cable (2) Assembly Cable (1)
09/12
18/24
18/24
Rubber Leg (4)
• T he flare nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
• The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe as
seen in the picture below.
27
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 27
2015/7/13 19:21:47
Accessories
Optional accessories
The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air
conditioner.
Insulated
Assembly Pipe,
Ø6.35mm (1)
Insulated Assembly
Pipe, Ø9.52mm (1)
09
Rubber Legs (4)
Pipe Clamps A (3)
Insulated Assembly Pipe, Insulated Assembly Pipe,
PE T3 Foam Tube
Ø12.70mm (1)
Ø15.88mm (1)
Insulation (1)
12/18
24
Vinyl Tapes (2)
Putty 100g (1)
M4 x 25 Tapped
Screws (6)
Drain Hose,
length 2m (1)
Foam
Insulation(1)
Pipe Clamps B (3)
Cement Nails (6)
• If these accessories are supplied, they will be in the accessory box.
Tools required for installation
General Tools
• Vacuum Pump(Backward flowing prevention)
• Torque Wrench
• Pipe Cutter
• Reamer
• Screw Driver
• Spanner
• Drill
• Manifold Gauge
• Pipe Bender
• L Wrench
• Stud Finder
• Spirit Level
• Measuring Tape
Tools for test operations
• Thermometer
• Resistance Meter • Electroscope
Fixing the installation plate
You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before fixing
the installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,
pipe and hose pass to connect the indoor unit to the outdoor unit.
When facing the wall, the pipe and cable can be connected from the:
 Direction of pipe
• Right (A)
• Left (B)
• Underside_right (C)
• Rear_right or left (D)
A
B
D
D
C
1. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameter
of 65mm so that it slants slightly downwards.
(Unit : mm)
D
A
Pipe hole
(Ø65mm)
B
C
Model
09/12
18/24
A
B
C
27 120 68
34 140 68
D
27
34
• M
ake sure to drill only one
hole after choosing the
direction of the pipe.
28
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 28
2015/7/13 19:21:48
2. Fix the indoor unit.
If you fix the indoor unit on a wall
(1) Fix the installation plate to the wall giving attention to the weight of the indoor unit.
Plastic
Anchor
• If you mount the plate to a concrete wall using plastic anchors, make sure that gaps
between the wall and the plate, created by projected anchor, is less than 20mm.
ENGLISH
If you fix the indoor unit on a window frame
(1) Determine the positions of the wooden uprights to be
attached to the window frame.
(2) Attach the wooden uprights to the window frame giving
attention to the weight of the indoor unit.
(3) Attach the installation plate to the wooden upright using
tapping screws.
Wall
<20mm
If you fix the indoor unit on a gypsum board
(1) Use stud finder to find out locations of the studs.
(2) Fix the plate hanger on two studs.
• S earch for other spots if there are less than two studs, or the distance between the studs are different from the
plate hanger.
• Fix the installation plate without inclining to one side.
• M
ake sure that a wall can withstand the weight of the product. If you install the product in a place where it is not
strong enough to withstand the product weight, the unit could fall and cause injury.
Connecting the assembly cable
Cable specification
Model
Power cable
Interconnection cable
09/12P
3G, 1.5mm² H07RN-F
4G, 1.5mm² H07RN-F
20A
3G, 2.5mm² H07RN-F
3G, 1.0mm² H07RN-F
2* 0.75mm² H05RN-F
25A
18/24P
(SJT,AWG16)
Type GL
• C
onnect the power cable to the auxiliary circuit breaker. If every pole fails to connect to
the power supply, it must be incorporated in a wire with a contact opening of ≥3mm.
Connecting the cable
Electrical work
(1) For electrical and earth works, comply with the ‘technical standards of electrical installations’ and the the ‘wiring
regulations’ of the Electricity Enterprises Act.
(2) Tighten the terminal block screw to 1.2 ~1.8 N•m (12 ~18 kgf•cm).
(3) Precautions when connecting terminal blocks of the indoor unit
 Before connecting, make sure the connecting part of the terminal socket is facing upwards.
Upside down

The terminal
There is no ring
socketis damaged. terminalto cover the wire.
There must be no space between the terminal and the screw when connected.
- Any remaining space may become a fire hazard due to overheating of the electrical contact.
Either the screw is not fitted properly
The terminal socket or there is a space between the screw
and the ring terminal.
is upside down.
• F or the terminal block wiring, use a wire with a ring terminal socket only.
Regular wires without a ring terminal socket may become a fire hazard due to overheating
of the electrical contact during a wiring work.
29
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 29
2015/7/13 19:21:48
Connecting the assembly cable
 When you install the unit, make first refrigerant connections and then electrical connections.
Connect the air conditioner to grounding system before performing the electrical connection.
If unit is uninstalled, first disconnect electrical cables, then refrigerant connections.
A 4 or 5-meter pipe is supplied with the air conditioner. If the outdoor unit is more than 4 or 5 meters away from the indoor unit,
you must extend the cable.
The maximum length of the cable is 15(09/12)/20(18/24) meters.
1. Extend the assembly cable if necessary.
• D
o not connect two or more different cables to extend the length.
It may cause fire.
2 . Open the front grille.
3 . Remove the screw securing the connector cover.
4 . Pass the assembly cable through the rear of the indoor unit and connect the assembly cable to terminals.
(Refer to the picture below)
• Each wire is labeled with the corresponding terminal number.
5 .
6 .
7 .
8 .
9.
Pass the other end of the cable through the 65mm hole in the wall.
Close the connector cover by tightening the screw carefully.
Close the front grille.
Remove the terminal board cover on the side of the outdoor unit.
Connect the cables to the terminals as seen in the picture.
• Each wire is labeled with the corresponding terminal number.
Indoor unit
09/12P
Indoor unit
18P
24P
Indoor unit
Indoor unit
1(L) 2(N) F1 F2
 Ground wire
(Green/Yellow)
Outdoor unit
Ground wire
(Green/Yellow)
 Ground wire
Ground wire
(Green/Yellow)
 Ground wire
(Green/Yellow)
Outdoor unit
 Ground wire
(Green/Yellow)

F1 F2
L
Outdoor unit
(Green/Yellow)
1(L) 2(N) F1 F2
N
Outdoor unit
• End of the wire must be circular.
• After connecting the cables, make sure terminal numbers on the indoor/outdoor unit matches.
• Screws on terminal block must not be unscrewed with the torque less than 12kgf•cm.
10. Connect the grounding conductor to the grounding terminals.
11. Close the terminal board cover by tightening the screw carefully.
• In Russia and Europe, consult with the supply authority to determine the supply system impedance before
installation.
• C
onnect the wires firmly so that wires can not be pulled out easily.
(If they are loose, it could cause burn-out of the wires.)
• Connect the wires according to color codes, referring to the wiring diagram.
• The power cable and the interconnection cable should be selected according to the specification in page 29.
30
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 30
2015/7/13 19:21:49
Installing
and connecting the assembly pipe of the indoor unit
AA
Connect indoor and outdoor units with field-supplied copper pipes by means of flare connections. Use insulated seamless
refrigeration grade pipe only, (Cu DHP type according to ISO1337), degreased and deoxidized, suitable for operating pressures
of at least 4200 kPa and for burst pressure of at least 20700 kPa. Under no circumstances must sanitary type copper pipe be
used.
ENGLISH
There are 2 refrigerant pipes of different diameters:
• The smaller one is for the liquid refrigerant
• The larger one is for the gas refrigerant
A short pipe is already fitted to the air conditioner. You may
need to extend the pipe using the assembly pipe (optional).
The connection procedure for the refrigerant pipe varies
according to the exit position of the pipe when facing the wall:
• Right(A)
• Left(B)
• Underside(C)
• Rear
A
1. Cut out the appropriate knock-out piece (A, B, C) on the rear of the indoor
unit unless you connect the pipe directly from the rear.
2. Smooth the cut edges.
3. Remove the protection caps of the pipes and connect the assembly pipe
to each pipe. Tighten the nuts first with your hands, and then with a
torque wrench, applying the following torque:
B
C
Outer Diameter
N•m
Torque
kgf•cm
ø6.35 mm
14~18
140~180
ø9.52 mm
34~42
350~430
ø12.70 mm
49~61
500~620
ø15.88 mm
68~82
690~830
• If you want to shorten or extend the pipes, refer to page 32~33.
4. Cut off the remaining foam insulation.
5. If necessary, bend the pipe to fit along the bottom of the indoor unit.
Then pull it out through the appropriate hole.
 The pipe should not project from the rear of the indoor unit.
 The bending radius should be 100 mm or more.
6. Pass the pipe through the hole in the wall.
7. For further details on how to connect to the outdoor unit and purge the air, refer to page 35~37.
• T he pipe will be insulated and fixed permanently into position after finishing the installation and the gas leak test;
refer to page 38 for further details.
• T ighten the flare nut with torque wrench according to specified method.
If the flare nut is over-tightened, the flare may break and cause refrigerant gas leakage.
• DO NOT WALL UP THE PIPE CONNECTION !
All refrigerant pipe connection must be easy accessible and serviceable.
31
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 31
2015/7/13 19:21:49
Purging
the indoor unit
AA
The indoor unit is supplied with inert gas (nitrogen).
Before installing the unit, check if nitrogen gas flow out of indoor unit.
If this one isn’t true, DO NOT INSTALL THE UNIT since leakage could be inside the indoor unit.
1. Unscrew the caps at the end of each pipe.

All inert gas exhausts from the indoor unit.
• T o prevent dirt or foreign substances from getting into the pipes during
installation, do NOT remove the caps completely until you are ready to
connect the pipes.
• T he remaining air in the Refrigeration cycle, which contains moisture,
may cause malfunction on the compressor.
• Always contact the service center or a professional installation agency
for product installation.
Pipes
Unscrew the caps
Cutting or extending the pipe
The length of the pipe can be:
• Extended up to : see table page 25
• Shorten up to: see page 25
If you need a pipe longer than 4 or 5 meters:
• You must extend the assembly cable.
• You must add refrigerant to the pipes; otherwise, the indoor unit may freeze.
1. Make sure that you have all the required tools (pipe cutter, reamer, flaring tool and pipe holder).
2. If you want to shorten the pipe, cut it using a pipe cutter, ensuring that the cut edge remains at 90° with the side of the
pipe (see below examples of correct and incorrect cut edges).
Pipe
cutter
Oblique
Rough
Burr
Pipe
3. To prevent a gas leak, remove all burrs at the cut edge of the pipe using a reamer.
• Face the pipe down while removing the burrs to make sure that burrs do not get in to the pipe.
4. Put a flare nut slightly into the pipe and modify the flare.
90°± 2°
B
45°
± 2°
R 0.4~0.8
Pipe
Outer Diameter (D)
Depth (A)
ø6.35 mm
1.3 mm
Flaring Size (B)
8.7 - 9.1 mm
ø9.52 mm
1.8 mm
12.8 - 13.2 mm
ø12.70 mm
2.0 mm
16.2 - 16.6 mm
ø15.88 mm
2.2 mm
19.3 - 19.7 mm
Flare
32
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 32
2015/7/13 19:21:49
5. Check if you flared the pipe correctly (see examples of incorrectly flared pipes below).
Inclined
Damaged
Surface
Cracked
Uneven
Thickness
ENGLISH
Correct
6. Align the pipes to connect them easily. Tighten the flare nuts first with your hands, and then with a torque wrench,
applying the following torque:
Torque
Flare nut
Outer Diameter
N•m
kgf•cm
ø6.35 mm
14~18
140~180
ø9.52 mm
34~42
350~430
ø12.70 mm
49~61
500~620
ø15.88 mm
68~82
690~830
Indoor outlet pipe
Connecting pipe
• E xcessive torque can be cause of gas leakage. In case brazing the pipe, the nitrogen gas must be blown into the
pipe (50 Pa). The joint must be accessible and serviceable.
7. For further details on how to connect to the outdoor unit and purge the air, refer to page 35~36.
• T ighten the flare nut with torque wrench according to specified method.
If the flare nut is over-tightened, the flare may break and cause refrigerant gas leakage.
Installing and connecting the drain hose of the indoor unit
When installing the drain hose for the indoor unit, check if condensation draining is adequate.
When passing the drain hose through the 65-mm hole drilled in the wall, check the followings:
Wall
Indoor unit
Drain hose
The drain hose must NOT
slant upwards.
5cm
less
The drain hose must not
be bent.
Keep a clearance of at least
5cm between the end of the
drain hose and the ground.
The end of the drain hose must NOT
be placed under water.
Ditch
Do not place the end of the
drain hose in a hollow.
33
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 33
2015/7/13 19:21:49
Installing and connecting the drain hose of the indoor unit
Drain hose installation
1. If necessary, connect the 2-meter extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose tightly with a clamp.
• If you do not use the other drain hose hole,
block it with a rubber stopper.
4. When extending the Drain Hose, hold the end of Drain Hose and Extended Hose,
rotate and insert the drain hose into Extended hose for 15~20 mm. Make sure
the two hoses are firmly connected, there is no water leakage.
Drain hose hole
5. Connect the Drain Hose after using Foam Insulation to wrap the Extended Hose. Then, Use vinyl tape to wrap the
each side of connection by 20mm .
20mm 20mm
or more or more
15~20 mm
Drain hose Extension
drain hose
Drain hose
Extension
drain hose
6. Pass the drain hose under the refrigerant pipe, keeping the drain
hose tight.
7. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
8. Using natural drainage method, check the drainage is normal.
Vinyl Tape
Foam Insulation
Shield
Drain hose
Extension drain hose
• T he hose will be fixed permanently into position after finishing the installation and the gas leak test; refer to page
38-39 for further details.
• M
ake sure the installed direction of the drain hose is correct.
Inadequate installation may cause condensate water leakage.
• If the drain hose is routed inside the room, insulate the hose so that dripping condensation does not damage the
furniture or floors.
• DO NOT WALL UP THE DRAIN HOSE CONNECTION !
Drain hose connection must be easy accessible and serviceable.
Changing direction of the drain hose
Change the direction only when it is necessary.
1. Detach the rubber cap with the plier.
2. Detach the drain hose by pulling it and turning to the left.
3. Insert the drain hose by fixing it with the screw into the groove of the drain
hose and the outlet of the drain pan.
4. Attach the rubber cap with a screwdriver by turning it to the right until it
fixes to the end of the groove.
5. Check for leakage on both side of the drain outlet.
Pour the water in direction of arrow.
 Direction of the drained water
Screw hole
Screw
Drain pan outlet
Drain hose
Rubber cap
• M
ake sure the indoor unit is in upright position when you pour water to check for leakage.
Make sure that the water does not overflow onto the electrical part.
34
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 34
2015/7/13 19:21:50
Purging
the connected pipes
AA
• W
hen installing, make sure there is no leakage. When recovering the refrigerant, ground the compressor first
before removing the connection pipe. If the refrigerant pipe is not properly connected and the compressor works
with the service valve open, the pipe inhales the air and it makes the pressure inside of the refrigerant cycle
abnormally high. It may cause explosion and injury.
1. Connect each assembly pipe to the appropriate valve on the outdoor unit and
tighten the flare nut.
Outdoor unit
ENGLISH
The outdoor unit is loaded with sufficient R410A refrigerant. Do not vent R410A into atmosphere: it is a fluorinated
greenhouse gas, covered by Kyoto Protocol, with a Global Warming Potential (GWP) = 1975.
You should purge the air in the indoor unit and in the pipe. If air remains in the refrigerant pipes, it affects the compressor.
It may cause reduction of cooling capacity and malfunction. Refrigerant for air purging is not charged in the outdoor unit.
Use Vacuum Pump as seen in the picture.
Indoor unit
Gas pipe side
2. Tighten the flare nut first with your hands, and then with a torque wrench,
applying the following torque:
Liquid pipe side
• Excessive torque can be cause of gas leakage.
Outer
Diameter
• M
ake the electrical connection and leave the system into “stand by
mode”. Do not turn on the system!
This is necessary for better vacuum operation (full OPEN position of
Electronic Expansion Valve - EEV -).
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
3. Connect the charging hose of the low-pressure side of manifold gauge to a
gas service port as seen in the picture.
Torque
N•m
kgf•cm
14~18 140~180
34~42 350~430
49~61 500~620
68~82 690~830
Manifold gauge
4. Open the valve of the low pressure side of manifold gauge counterclockwise.
5. Purge the air in the connected pipes using the vacuum pump for about
15 minutes.
Make sure that pressure gauge shows -0.1MPa(-76cmHg) after about
Valve
Gas service port
<Low pressure>
10 minutes.
This procedure is very important to avoid a gas leak.
Close the valve of the low pressure side of manifold gauge clockwise.
Turn off the vacuum pump.
Check for 2 minutes if there is any pressure change.
Remove the hose of the low pressure side of manifold gauge.
Liquid service port
<High pressure>
Vacuum
Pump
(Backward flowing
prevention)
6. Set a valve cork of liquid and gas service port to the open position.
35
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 35
2015/7/13 19:21:50
Purging the connected pipes
Adding Refrigerant
Add refrigerant charge according to table below:
A 4 or 5-meter pipe is supplied with the air conditioner.
If you use a pipe longer than 4 or 5m,
‘A’g of refrigerant R410A must be added for each extra meter.
Model
A
09/12
10
18/24
15
If you use a pipe shorter than 4 or 5 m,
The purge time is normal.
Refer to the Service Manual for further details.
• T he remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction on the compressor.
• Always contact the service center or a professional installation agency for product installation.
Important information regulation regarding the refrigerant used
This product contains fluorinated greenhouse gases covered by the Kyoto
Protocol.
Do not vent gases into the atmosphere.
1. Please fill in with indelible ink,
  the factory refrigerant charge of the product,
 the additional refrigerant amount charged in the field and
+ the total refrigerant charge. on the refrigerant charge label
Refrigerant type
R410A
GWP value
1975
 GWP=Global Warming Potential
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol.
Indoor unit
supplied with the product.
a. Factory refrigerant charge of the product:
see unit name plate
b. Additional refrigerant amount charged in the field (Refer
to the above information for the quantity of refrigerant
replenishment.)
c. Total refrigerant charge
d. Refrigerant cylinder and manifold for charging

d
a
 = (
 = (
b
) kg
) kg

Outdoor unit
+ = (
) kg
c
• T he filled-out label must be adhered in the proximity of the product charging port (e.g. onto the inside of the stop
valve cover).
36
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 36
2015/7/13 19:21:50
Charging the refrigerant under conditions of liquid by using a liquid pipe
1. Before recharging, check whether the cylinder has a siphon or not.
There are two ways to recharge the refrigerant.
Cylinder with siphon
ENGLISH
R410A is a mixed type of refrigerant. It is necessary for recharging under conditions of liquid. When recharging refrigerant from
the refrigerant cylinder to the equipment, follow the instructions below.
Cylinder without siphon
siphon
 Charge the refrigerant standing the
cylinder upright.
 Charge the refrigerant turning the cylinder
upside down.
• If R410A refrigerant is charged with gas, the composition of the charged refrigerant changes and the
characteristics of the equipment vary.
• During the measuring operation of refrigerant quantity added use an electronic balance.
If cylinder doesn’t have syphon, upset it.
37
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 37
2015/7/13 19:21:51
Performing the gas leak tests
AA
Make sure to check for gas leaks before completing the installation process (connecting the assembly pipe and hose between
indoor unit and outdoor unit, insulating the cables, hose and pipe, and fixing the indoor unit to the installation plate).
A
D
C
B
Test part for outdoor unit
Test part for indoor unit
Tightening torque for body cap
(Refer to the table)
 Before inspecting the leakage, use a torque wrench
Spindle
Charging
core
R-22: Diameter of the screw - 7/16-20UNF
R-410A: Diameter of the screw - 1/2-20UNF
Tightening torque for charging port cap
(Refer to the table)
To check for gas leaks on the outdoor unit,
Check the valve A and B using a leak detector.
To check for gas leaks on the indoor unit,
Check the flare nut C and D using a leak detector.
to close the cap for the service valve. (Comply with a
tightening torque for each size of the diameter,and
tighten the cap firmly to prevent any leakage.).
 To check for any possible leakage, insert inert gas into
the pipes connected to indoor/outdoor units and
check the connection part of the indoor/outdoor units
with soap lather or liquid for leakage test.
Outer Diameter (mm)
ø 6.35
ø 9.52
ø12.70
ø15.88
ø19.05
Tightening torque
port cap
Body cap (N•m) Charging
(N•m)
20 ~ 25
20 ~ 25
25 ~ 30
10 ~ 12
30 ~ 35
35 ~ 40
( 1 N•m = 10 kgf•cm )
Leak test with nitrogen (before opening valves)
In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating the R410A, it’s responsible of
installer to pressurize the whole system with nitrogen (using a cylinder with pressure reducer) at a pressure above 40 bar
(gauge).
Leak test with R410A (after opening valves)
Before opening valves, discharge all the nitrogen from the system and create vacuum according to page 35~37.
After opening valves, check leaks using a leak detector for refrigerant.
Pump down (before disconnecting the refrigerant connections for unit repair, removal or disposal)
Pump-down is an operation intended to collect all the system refrigerant in the outdoor unit.
This operation must be carried out before disconnecting the refrigerant tubing in order to avoid refrigerant loss to the
atmosphere.
 Shut off the liquid valve with the Allen wrench.
 Turn the system on in cooling with fan operating at high velocity.
(Compressor will immediately start, provided 3 minutes have elapsed since the last stop).
 After 2 minutes of operation, shut the suction valve with the same wrench.
 Turn the system off and switch mains supply off.
 Disconnect tubing. After disconnection, protect valves and tubing ends from dust.
 Compressor damage may occur if run at a negative suction pressure.
38
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 38
2015/7/13 19:21:51
Fixing the indoor unit in place
AA
Perform the following work on the area where gas leak test was done priorly.
Insulation
After checking for gas leaks in the system, insulate the pipe, hose and cables.
Then place the indoor unit on the installation plate.
Pipes
2. Wind the pipe, assembly cable and drain hose with vinyl tape.
3. Place the bundle (the pipe, assembly cable and drain hose) in the lower
part of the indoor unit carefully so it does not project from the rear of the
indoor unit.
Installation
plate
Vinyl tape
4. Hook the indoor unit to the installation plate and move the unit to the
right and left until it is securely in place.
• M
ake sure pipe does not move when you install the indoor unit on
an installation plate.
ENGLISH
1. To avoid condensation problems, wrap foam insulation (as shown in the figure)
on a part without insulation on the end of the pipes.
Connecting
pipes
Connecting wires
Drain hose
5. Wrap the rest of the pipe with vinyl tape.
6. Attach the pipe to the wall using clamps (optional).
Fixing the outdoor unit in place
1. Place the outdoor unit as indicated on the top of the unit to let the discharged air
out properly.
2. Fix the outdoor unit in level to an appropriate support using anchor bolts.
3. If the outdoor unit is exposed to strong winds, install shield plates around the
outdoor unit so that the fan can operate correctly.
'X' mm
'Y' mm
Install the outdoor unit in level on a stable base to avoid the generation of noise and
vibration, especially when installing the unit close to a neighbor.
If you install the outdoor unit in a place exposed to strong winds or at a height, fix it to an
appropriate support (wall or ground).
Rubber leg
Model
ASV09P
ASV12P
ASV18P
ASV24P
X
457
538
612
660
Y
254
290
317
340
• Secure the rubber leg to prevent the generation of noise and vibration.
Outdoor unit installed on the wall by rack
Designed to cut off residual vibration
from outdoor unit to rack.
(not supplied with product)
• E nsure the wall will be able to suspend the weight of rack and
outdoor unit;
• Install the rack close to the column as much as possible;
• Install proper grommet in order to reduce noise and residual
vibration transferred by outdoor unit towards wall.
Soft rubber designed to cut off
vibration from rack to wall.
(not supplied with product)
39
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 39
2015/7/13 19:21:51
Final Check and Trial Operation
To complete the installation, perform the following checks and tests to
ensure that the air conditioner operates correctly.
Check the followings:
• Strength of the installation site
• Tightness of pipe connection to detect gas leak
• Electric wiring connection
• Heat-resistant insulation of the pipe
• Drainage
• Grounding conductor connection
• Correct operation (follow the steps below)
1. Press the Power
button and check the following:
 The indicator on the indoor unit lights up.
The airflow blade opens and the fan gears up for operation.
2. Press the Mode button to select Cool mode.
 In Cool mode, use Temp +
or - button and set the temperature at 16°C.
• A
pproximately 3~5 minutes later, outdoor unit will start to operate and the Cool air will blow out.
• After 12 minutes of stationary condition check the indoor unit air treatment.
Cooling mode (indoor unit check)  Inlet air temp. - Outlet air temp : From 10°K to 12°K ( indicative delta T)
3. Press the Air swing
button and check the following:
 The airflow blades work properly.
4. Press the Power
button to stop the operation.
• W
hen you complete the installation successfully, hand over this manual to the user for storage in a handy and safe
place.
Pump down procedure (when removing the product)
1. Turn on the air conditioner and select Cool mode to run the compressor for 3 minutes.
2 . Release the valve caps on High and Low pressure side.
3 . Use L wrench to close the valve on the high pressure side.
4 . Approximately 2 minutes after, close the valve on the low pressure side.
5 . Stop operation of the air conditioner.
6 . Disconnect the pipes.
40
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 40
2015/7/13 19:21:51
How
AA to connect your extended power cables
Items to prepare
(compressor and insulation tape should be prepared by an installation technician.)
Crimping plier
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
MH-14
20xØ7.0(HxOD)
Width 18mm
50xØ8.0(LxOD)
ENGLISH
Tools
Spec
Shape
1. As shown in the figure, peel off the shields from the rubber/wire
of the power cable.
- Peel off 20 mm of the wire shields of the tube installed already.
• After peeling off the tube wire, you must insert a contraction tube.
(Unit: mm)
Power cable (provided by us)
20
20
20
60
120
180
Wire tube power cable
20
2. Insert both sides of core wire of the power cable into the connection sleeve.
Connection sleeve
3. Using a compressor, compress the two points and flip it over
and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Comp. dim.
Compress it 4 times
5mm
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
insulation tape to finish.
Insulation tape
40mm
Contraction tube
Insulation tape
• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
- Incomplete wire connections can cause electric shock or a fire.
41
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 41
2015/7/13 19:21:51
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
MEXICO
www.samsung.com/mx/support
COSTA RICA
01-800-SAMSUNG(726-7864)
0800-124-421 (Demais cidades e regiões)
4004-0000 (Capitais e grandes centros)
0-800-507-7267
00-800-1-SAMSUNG (726-7864)
DOMINICAN REPUBLIC
1-800-751-2676
ECUADOR
JAMAICA
1-800-10-7267
1-800-SAMSUNG (72-6786)
800-6225
800-0726-7864
1-800-299-0013
1-800-299-0033
800-2791-9267
800-2791-9111
1-800-234-7267
1-800-SAMSUNG (726-7864)
NICARAGUA
001-800-5077267
PANAMA
800-7267
800-0101
PUERTO RICO
1-800-682-3180
TRINIDAD
& TOBAGO
VENEZUELA
1-800-SAMSUNG(726-7864)
BRAZIL
EL SALVADOR
GUATEMALA
HONDURAS
PERU
ARGENTINE
0-800-SAMSUNG (726-7864)
Bogotá 600 12 72
Gratis desde cualquier parte del país 01 8000
112 112 ó desde su celular #SAM(726)
800-SAMSUNG(726-7864)
[HHP] 02-24828200
800-10-7260
[HHP] 4828210
0800-777-08
0800-555-SAMSUNG (0800-555-7267)
URUGUAY
000-405-437-33
PARAGUAY
009-800-542-0001
COLOMBIA
CHILE
BOLIVIA
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 42
www.samsung.com/br/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/ve/support
www.samsung.com/co/support
www.samsung.com/cl/support
www.samsung.com/cl/support
www.samsung.com/pe/support
www.samsung.com/ar/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
2015/7/13 19:21:52
ASV09P Series
ASV12P Series
ASV18P Series
ASV24P Series
Air Conditioner
user & installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
EN ES PT
DB68-03248A-2
Panama_ASV12P@_IBIM_DB68-03248A_EN-2.indd 43
2015/7/13 19:21:52