TO INFORM YOU - Milwaukee Electric Tool

TO INFORM YOU
PRODUCT
SUPPORT
BULLETIN # 337
TO: AUTHORIZED Portable Electric Tool SERVICE STATIONS
BRANCH OFFICE SERVICE CENTERS
SALES COMPANIES
FROM:
DATE: JULY, 1999
Corbert A. Garb - National Service Manager
TOOL(S) \ PRODUCT(S) AFFECTED
18VDC - 6516-02, 6516-51 SAWZALL®
120VAC - 6509-21 SAWZALL®, 6517-20, 6518 SAWZALL®+PLUS , 6527-21, 6537-22 SUPER SAWZALL®
INTERNATIONAL - 6518-55 SAWZALL®+PLUS, 6522-5, 6522-51, 6528-51, 6528-55 SUPER SAWZALL®
SUBJECT:
14-46-1011 STEEL QUIK-LOK™ BLADE CLAMP KIT
LIST PRICE $ 7.75
14-46-1011 STEEL QUICK-LOK™ BLADE CLAMP KIT
IS A NEW SERVICE REPLACEMENT PART FOR
®
SERVICING OF SAWZALL PRODUCT WITH THE QUIK™
LOK
FEATURE.
THIS KIT CONTAINS THE
FOLLOWING;
ITEM
31-15-0511
34-60-3680
40-50-0161
42-50-0077
42-50-0076
44-60-0626
45-22-0081
DESCRIPTION
QTY PER
SPRING COVER
EXT RETAINING RING
TORSION SPRING
REAR CAM
FRONT STEEL CAM COLLAR
LOCK PIN
SLEEVE
FIG NO.
1
1
1
1
1
1
1
49
67
50
58
66
7
43
ASSEMBLY OF STEEL QUIK-LOK™ BLADE CLAMP
•
Holding tool in vertical position, place SPRING COVER (49)
onto spindle.
•
Slide TORSION SPRING (50) onto spindle with leg of spring on ‘hole’ side of spindle.
•
Slide SLEEVE (43) onto spindle, aligning hole of sleeve with spindle hole.
•
Slide REAR CAM (58) over sleeve until it bottoms against sleeve shoulder, ensure spring leg is inserted in hole of rear cam.
•
Rotate REAR CAM in the direction of the arrows shown on SPRING COVER until there is clearance for LOCK PIN (7) to be inserted into sleeve / spindle
holes. Coat LOCK PIN with powered graphite and insert.
•
Align FRONT STEEL CAM COLLAR (66) inner ribs with REAR CAM outer slots and slide FRONT CAM onto sleeve until it bottoms.
•
Attach RETAINING RING in groove of SLEEVE and insure it is fully seated.
•
Blade Clamp Assembly should move freely. Spray lubricant (44-22-0190 TFE Dry Spray Teflon Lubricant, or equivalent) can be used to help maintain ‘free’
blade clamp movement during normal use. In extreme conditions, it may be necessary to remove, clean and re-assemble blade clamp.
*Note: On early version Quik-Loc Sawzall’s without counter bore (drill point) in the spindle to fully accept blade lock pin, installation will require the Lock Pin to be at a ‘midway’ point on the
ramp of the Rear Cam. Turn the Rear Cam 1/2 way, before installing the assembly (Rear Cam, Sleeve & Pin) into the Front Cam.
Please Note! 14-46-1010 QUIK-LOK™ BLADE CLAMP KIT and components are ‘OBSOLETE’; PLASTIC COLLAR (31-15-0075),
SPRING COVER (31-15-0510), TORSION SPRING (40-50-0160), CAM COLLAR (42-50-0075), PIN
(44-60-0625), SLEEVE (45-22-0080) & WASHER (45-88-8576 ) are ‘OBSOLETE - replaced by’ the
14-46-1011 STEEL QUICK-LOK™ BLADE CLAMP KIT.
A 14-46-1011 STEEL QUICK-LOK™ BLADE CLAMP KIT will be substituted when
ordering a 14-46-1010 kit and any of it’s components.
This bulletin is for informational purposes. PLEASE NOTE ON SERVICE PARTS LIST; 120VAC 54-40-0728, -0729, -1575, -1576,
MILWAUKEE ELECTRIC TOOL CORPORATION an Atlas Copco Company
13135 WEST LISBON ROAD • BROOKFIELD, WISCONSIN 53005
(414) 781-3600
-1577, -5125, -5126, -5127, -5150, -5151, -5152, -5153, -5154, -5200, -5201, -5225, -5226, INTERNATIONAL 55-40-1575, 1576, -5060, -5079, -5150, -7000, -7025