OWNER’S
INSTRUCTIONS
Heat pump
Cooling only
AVMPH060EA0
AVMPH070EA0
AVMPH082EA0
AVMPC060EA0
AVMPC070EA0
AVMPC082EA0
System Air Conditioner
E DB98-07286A(1)
Safety Precautions
WARNING
DANGER
CAUTION
E-2
◆ If the power supply cord of this air conditioner is damaged,
it must be replaced by the manufacturer or its authorized
service personnel only in order to avoid a safety hazard.
◆ Do not attempt to install this air conditioner by yourself.
◆ This unit contains no user-serviceable parts. Always consult authorized
service personnel for repairs.
◆ When moving, consult authorized service personnel for disconnection
and installation of the unit.
◆ Do not become over-exposed to cold air by staying in the direct path of
the airflow of the air conditioner for extended periods of time.
◆ Do not insert fingers or objects into the outlet port or intake grilles.
◆ Do not start and stop air conditioner operation by disconnecting the
power supply cord and so on.
◆ Take care not to damage the power supply cord.
◆ In the event of a malfunction (burning smell, etc.), immediately stop
operation, turn off the electrical breaker, and consult authorized
service personnel.
◆ Provide occasional ventilation during use.
◆ Do not direct air flow at fireplaces or heating apparatus.
◆ Do not climb on, or place objects on, the air conditioner.
◆ Do not hang objects from the indoor unit.
◆ Do not set flower vases or water containers on top of air conditioners.
◆ Do not expose the air conditioner directly to water.
◆ Do not operate the air conditioner with wet hands.
◆ Do not pull power supply cord.
◆ Turn off power source when not using the unit for extended periods.
◆ Check the condition of the installation stand for damage.
◆ Do not place animals or plants in the direct path of the air flow.
◆ Do not drink the water drained from the air conditioner.
◆ Do not use in applications involving the storage of foods, plants or
animals, precision equipment, or art works.
◆ Do not apply any heavy pressure to radiator fins.
◆ Operate only with air filters installed.
◆ Do not block or cover the intake grille and outlet port.
◆ Ensure that any electronic equipment is at least one metre away from
either the indoor or outdoor units.
◆ Avoid installing the air conditioner near a fireplace or other heating
apparatus.
◆ When installing the indoor and outdoor unit, take precautions to prevent
access to infants.
◆ Do not use inflammable gases near the air conditioner.
◆ Max input power & current is measured according to IEO standard and
input power & current is measured according to ISO standard.
Contents
◆ PREPARING YOUR AIR CONDITIONER
■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Wireless Remote Controller-Buttons and Display . . . . . . . . . . .
■ Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Using the Control Panel on the Indoor Unit . . . . . . . . . . . . . . . .
2
4
6
7
8
◆ RECOMMENDATIONS FOR USE
■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . 10
■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 12
■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 13
◆ TECHNICAL SPECIFICATIONS
E-3
View of the Unit
The figures are shown in this instruction may differ from yours depending on the model.
Indoor Unit
Air flow blade(up/down orientation)
Air flow blade(right/left orientation)
Air outlet
Automatic shutter
Air filter
Remote control holder
To open the grille
◆Hold the upper part of the grille, then pull it
slightly forward.
◆Don’t open the grille when it is operating. It may
cause a malfunction or an electrical hazard.
Air inlet
Control Panel
You can operate the air conditioner with the control panel when you can’t or
don’t want to operate the air conditioner with the remote control. Refer to page 8.
Fan Speed
adjustment button
Remote Control
Sensor
E-4
Temperature
adjustment
buttons
Mode Selection
button
Air Cleaning On/Off
button button
Outdoor Unit
TYPE A
Air outlet
Connection valve
Outdoor Unit
TYPE B
Air outlet
Connection valve
Outdoor Unit
TYPE C
Air outlet
Connection valve
Outdoor Unit
TYPE D
Air outlet
Connection valve
Outdoor Unit
TYPE E
Air outlet
Connection valve
Note
If the heat exchanger in the outdoor unit gets dusty, cooling efficiency may fall. So clean the heat exchanger with water
when it becomes dirty. However, be careful when you wash the surface of the heat exchanger because it is very sharp.
E-5
Wireless Remote Controller-Buttons and Display
The wireless remote controller is an optional accessory.
To use the wireless remote controller, refer to an appropriate manual.
Operating mode
Temperature setting
Mode selection button
Temperature adjustment
buttons
Filter Reset button
Fan speed
Air flow direction
Fan speed adjustment
button
Swing buttons
On Timer setting
On Timer button
Off Timer setting
Off Timer button
Clean mode
Battery discharge indicator
Air cleaning button
Note
E-6
- After cleaning the air filter, press the filter reset button.
- The heating mode( ) is not selected in the Cooling Only models.
On/Off & Timer
Set/Cancel button
Centralized Controller
The centralized controller is an optional accessory and it is installed on the wall.
To use the centralized controller, refer to an appropriate manual.
Operating lamp
All On button
All Off button
On/Off indicators
On/Off buttons
Index
Note
Operating lamp comes on when at least one air conditioner connected to the
centralized controller is operating.
E-7
Using the Control Panel on the Indoor Unit
You can operate the air conditioner with the control panel when you can't or don't want to operate the
air conditioner with the remote control.
1
If you want to operate the air conditioner, press the
Result:
2
◆ The air conditioner starts up in the mode which was last selected
and used.
◆ The indoor unit beeps
◆ If you want to stop, press the
(On/Off) button once again.
To adjust the mode you want, press the
Result:
(On/Off) button.
◆ You can select each
(Heat) mode.
◆ The
,
,
you press the
,
(Auto),
,
button.
(Cool),
(Dry),
(Fan),
indicator is displayed in turn each time
button.
Caution
◆ The
3
To adjust your desired temperature, press the
or more times.
Result:
E-8
mode is selected only in the Heat Pump models.
buttons once
◆ If you finish setting the temperature, the current temperature
indicates on the control panel.
4
To adjust the Fan speed, press the
button.
5
To adjust the air clean mode, press the
button.
You can select this mode at anytime while the air conditioner is operating.
Operating Recommendations
Here are a few recommendations that you should follow when operating
your air conditioner.
Topic
Recommendation
Heating
performances
The heat pump function of the air conditioner absorbs heat
from outside air and brings it indoors. As the temperature of the
outside air drops, the heating performance of air conditioner will
decrease. If you find that the room is not warm enough, using
an additional heating appliance is recommended.
Frost
When outside temperature is low but humidity is high,
frost may form on the outdoor unit at HEAT mode.
If this happens:
◆ The heating operation stops.
◆ The defrost mode will be triggered automatically for about ten
minutes and the
(defrost) indicator lights up.
No intervention is required ; after about ten minutes, the air
conditioner operates again normally.
High indoor
and outdoor
temperatures
If both indoor and outdoor temperatures are high and the air
conditioner is running at HEAT mode, the outdoor unit’s fan
and compressor may stop at times.
This is normal ; simply wait until the air conditioner switches
on again.
Power failure
If a power failure occurs while the air conditioner is operating,
the unit will be switched off. When the power returns, the air
conditioner starts up again automatically.
E-9
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must clean it
regularly to remove the dust that accumulates on the air filter.
While you are cleaning the air conditioner, the
(filter) indicator lights
up on the control panel.
IMPORTANT
1
Open the front grille, then pull out the air filter.
2
Remove all dust on the air filter with a vacuum cleaner or brush.
3
When you have finished, insert the air filter into the original position and
close the front grille.
4
Clean the unit with a damp cloth and mild detergent (do NOT use benzene,
solvents or other chemicals).
Note
E-10
Before cleaning your air conditioner, ensure that you have switched
off the breaker for the unit.
◆ If you have not used the air conditioner for a long period of time,
set the fan going for three to four hours to dry the inside of the
air conditioner thoroughly.
◆ After cleaning the air conditioner, press the Filter Reset button.
To Clean the Electric Dust Collector
You have to clean the electric dust collector once a month and the
cleaning cycle depends on the time during which the air conditioner
is used.
1
Open the front grille, then pull out the electric dust collector.
2
Dissolve an alkaline detergent in tepid water, then put the Electric dust
collector in the water for 30 minutes.
Note
Electric Dust
Collector
◆ Do not handle the detergent with bare hands.
◆ Do not place the filter in the water for a long time.
It may damage the filter
3
Clean the electric dust collector with running water.
4
Dry the electric dust collector in the shade, then insert the collector into
the original position, close the front grille.
E-11
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges,
within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperature
The automatic protection feature may be
triggered and the air conditioner stopped.
Low temperature
A water leakage or some other
malfunction may happen if the heat
exchanger freezes.
High humidity levels
Water may condense on and drip from
the surface of the indoor unit if it is used
for a long periods.
Mode
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Heating
27°C or less
-20°C to 24°C approx.
-
Cooling
21°C to 32°C approx.
- 5°C to 43°C approx.
Drying
18°C to 32°C approx.
-5°C to 43°C approx.
❇
E-12
80% or less
-
If the heating operation is used at below 0°C(outdoor temperature) then,
it does not heat at its full capacity.
If the cooling operation is used at over 33°C(indoor temperature) then,
it does not cool at its full capacity.
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save your time and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not ◆ Check that the breaker used for the air conditioner is switched on.
operate at all
The air conditioner does not ◆ Check that there are no obstacles between you and the remote
operate with the remote
control sensor.
controller
◆ Check the wireless remote controller batteries
◆ Check that you are close enough to the remote control sensor.
(seven metres/yards or less).
No beep is heard when you ◆ Check that you are pointing the remote controller at the remote
press the
(On/Off)button
control sensor on the indoor unit.
on the remote controller
◆ Replace the remote controller batteries if necessary.
◆ If there is a strong light around the air conditioner, a
three-wavelength light, a neon sign, etc., for example,
the air conditioner may not be operated with a remote controller.
If this happens, use the remote controller close by the remote
control sensor.
The air conditioner does
not cool or heat
◆ Check that the correct operating mode has been selected.
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 10 or 11
for cleaning instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
When heating, the required ◆ Check that the required temperature has been set correctly.
room temperature is never ◆ Increase the fan speed.
reached and the air
conditioner frequently stops
E-13
Technical Specifications
Model
Power Supply
AVMPH060EA0
AVMPH070EA0
AVMPH082EA0
1Ø, 220-240V~, 50Hz
AVMPC060EA0
AVMPC070EA0
AVMPC082EA0
E-14
Memo
E-15
THIS AIR CONDITIONER IS MANUFACTURED BY:
ELECTRONICS
Printed in Korea