advertisement
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Consommateurs Samsung.
Country
U.S.A
CANADA
Customer Care Center
Web Site
1-800-SAMSUNG(726-7864) www.samsung.com/us
1-800-SAMSUNG(726-7864) www.samsung.com/ca
Address
Samsung Electronics America, Inc. 105 Challenger Road
Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Plasma TV user manual
BN68-02143A
BN68-02143A-00
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
2009-03-10 오후 5:36:02 BN68-02143A_Eng.indb 1
Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions.
Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
English -
BN68-02143A_Eng.indb 2 2009-03-10 오후 5:36:02
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 24 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause similar effects to the screen.
Damages caused by the above effect are not covered by the Warranty.
After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
BN68-02143A_Eng.indb 3
English -
2009-03-10 오후 5:36:03
Contents
■
■
■
■
■
■
Connecting and Preparing Your TV
List of Features ..........................................................................5
Checking Parts ..........................................................................5
Assembling the Cables ..............................................................5
Viewing the Control Panel .........................................................6
Viewing the Connection Panel...................................................7
Remote Control .........................................................................8
■
■
■
■
■
Connections
■
■
■
■
■
Connecting VHF and UHF Antennas .........................................9
Connecting Cable TV ................................................................9
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI ............................................. 11
Connecting a DVD /Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via DVI ................................................ 11
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables ........................12
Connecting a Camcorder ........................................................12
Connecting a VCR ...................................................................13
Connecting a Digital Audio System .........................................14
Connecting an Amplifier / DVD Home Theater ........................14
Connecting a PC .....................................................................15
■
■
■
■
■
■
■
Operation
Turning the TV On and Off ......................................................16
Changing Channels .................................................................16
Adjusting the Volume ...............................................................16
Using the TOOLS Button .........................................................17
Viewing the Display .................................................................17
Viewing the Menus ..................................................................18
Plug & Play Feature ................................................................19
■
■
Channel Control
Storing Channels ....................................................................20
Managing Channels ................................................................20
Picture Control
■ Changing the Picture Settings .................................................22
■
■
■
PC Display
Using Your TV as a Computer (PC) Display ............................26
Display Modes .........................................................................26
Setting up the TV with your PC ...............................................27
Sound Control
■ Changing the Sound Settings ..................................................28
■
■
■
■
Function Description
Configuring the Setup Menu ....................................................29
Setting the Time ......................................................................33
Source List / Edit Name ...........................................................34
Support ....................................................................................34
■
■
■
■
Media Play
Using the Media Play Function ................................................36
Using the PHOTO (JPEG) List ................................................37
Using the MP3 List ..................................................................40
Using the Setup Menu .............................................................41
■
■
Anynet+
Connecting Anynet+ Devices ..................................................42
Troubleshooting for Anynet+ ...................................................45
■
■
■
■
■
■
■
■
■
Appendix
Troubleshooting .......................................................................46
Preparation before installing the Wall-Mount ...........................47
How to attach the Stand-Base .................................................47
Using the Stand-Base .............................................................47
Securing the TV to the Wall .....................................................48
Wall Mount Kit Specifications (VESA) .....................................49
Specifications ..........................................................................50
Dimensions (PN50B540S3F) ..................................................51
Dimensions (PN58B540S3F) ..................................................52
Symbol
Press
N
Note
O
One-Touch Button
T
TOOLS
English - 4
2009-03-10 오후 5:36:03 BN68-02143A_Eng.indb 4
Connecting and Preparing Your TV
List of Features
•
•
•
•
•
•
•
•
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
V-Chip function.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.
You can listen to music files and view pictures on USB Mass Storage Class (MSC) devices.
HDMI/DVI connection of your PC to this TV.
SRS TruSurround HD provides a virtual surround system.
Checking Parts
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
N
The items' color and shape may vary depending on the model.
Remote Control
(BN59-00855A) /
AAA Batteries
(4301-000103)
Power Cord
(3903-000144)
Owner’s Instructions /
Quick Setup Guide
Warranty Card /
Safety Guide Manual
(Not available in all locations)
Cleaning Cloth
(BN63-01798B)
Holder-Wire Cable
Ferrite Core for
Power Cord
(3301-001305)
Ferrite Core for
Side-AV
(3301-001201)
PN58B540S3F only
Cover-Bottom /
Screws (2ea)
PN58B540S3F only
Cover-Bottom
PN50B540S3F only
Holder-Ring (4ea)
(Refer to page 47)
➢
Ferrite Core
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near the plug.
Holder TV / Screws
(BN96-10788A)
(Refer to page 48)
Screw (4ea)
PN50B540S3F
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.
Power Cord
Audio Cable / Video Cable
PN58B540S3F only
English - 5
BN68-02143A_Eng.indb 5 2009-03-10 오후 5:36:05
Viewing the Control Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
N
N
The product color and shape may vary depending on the model.
If you touch the front panel button, the each button will be operated.
1
SOURCE
E
Toggles between all the available input sources
(TV, AV1, AV2, Component1, Conponent2, PC, HDMI1, HDMI2/DVI, HDMI3).
In the on-screen menu, use this button as you use the
ENTER
E
button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL –
Press to increase or decrease the volume. In the on-screen menu, use the
+ VOL –
buttons as you would use the
◄ and ► buttons on the remote control.
4 <
CH
>
Press to change channels. In the on-screen menu, use the
<
CH
>
buttons as you would use the ▲ and ▼ buttons on the remote control.
5
POWER INDICATOR
Blinks and turns off when the power is on and lights up in stand-by mode.
6 P
(POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
English -
BN68-02143A_Eng.indb 6 2009-03-10 오후 5:36:05
Viewing the Connection Panel
Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray/DVD players or a VCR.
N
The product color and shape may vary depending on the model.
TV Rear Panel TV Side Panel
1
POWER IN
Connects the supplied power cord.
2
AUDIO OUT
Connect to a Digital Audio component.
3
PC IN [PC] / [AUDIO]
Connects to the video and audio output jacks on your PC.
4
DVI AUDIO IN (AUDIO-R/L)
Connect to the DVI audio output jack of an external device.
5
HDMI IN 1, (DVI),
Connect to the HDMI jack of a device with an HDMI output.
(HDMI 2 supports HDMI-DVI IN and connection from a PC.)
-
-
HDMI 2 can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.
6
ANT IN
Uses a 75Ω Coaxial connector for an Air/Cable Network.
7
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
8
COMPONENT IN 1, / AV IN 1
Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.
N
Connect the video cable to the COMPONENT IN 1
[Y/VIDEO] jack and the audio cable to the COMPONENT
IN 1 [R-AUDIO-L] jacks.
9
EX-LINK
Used for service only.
0
USB
Connect a USB mass storage device to view photo files and play audio files.
!
AV IN
Video and audio inputs for external devices.
English -
BN68-02143A_Eng.indb 7 2009-03-10 오후 5:36:06
Remote Control
You can use the remote control up to a distance of about feet from the TV.
N
N
The product color and shape may vary depending on the model.
The performance of the remote control may be affected by bright light.
1
2
POWER
Turns the TV on and off.
NUMERIC BUTTONS
Press to change the channel.
3
Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel
“54-3”, press “54”, then press “ ” and “3”.
4 M
MUTE
Press to temporarily cut off the sound.
$
Use these buttons in the DMA, Media Play and Anynet+ modes.
( : This remote can be used to control recording on Samsung recorders with the
Anynet+ feature)
%
TV
^
PRE-CH
&
Selects the TV mode directly.
Tunes to the previous channel.
CH
Press to change channels.
5
8
VOL
TOOLS
functions.
Press to increase or decrease the volume.
6
SOURCE
Press to display and select the available video sources.
7
CH LIST
Used to display Channel Lists on the screen.
Use to quickly select frequently used
*
MENU
Displays the on-screen menu.
9
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu items and change menu values.
(
)
RETURN
Returns to the previous menu.
a b d
FAV.CH
Press to switch to your favorite channels.
EXIT
Press to exit the menu.
P.SIZE
Picture size selection.
CC
Controls the caption decoder.
0
INFO
Press to display information on the TV screen.
!
COLOR BUTTONS
Use these buttons in the Channel list and
Media Play function. c e
SRS
Selects SRS TruSurround HD mode.
MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
@
MEDIA.P
(Media play)
This function enables you to view and play photo and music files from an external device. (Refer to pages 37 (Photo) and 40
(Music))
#
P.MODE
Press to select the picture mode.
❑
Installing Batteries in the Remote Control
1.
Lift the cover at the back of the remote control upward as shown in the figure.
.
Install two AAA size batteries.
N
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
.
Close the cover as shown in the figure.
N
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)
N
If the remote control doesn’t work, check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English -
BN68-02143A_Eng.indb 8 2009-03-10 오후 5:36:07
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennaswith300ΩFlatTwin
Leads” below.
If your antenna has one lead that looks like this, see “Antennaswith75ΩRoundLeads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
❑
Antennaswith300ΩFlatTwinLeads
Ifyouareusinganoff-airantenna(suchasaroofantennaorrabbitears)thathas300Ω twin flat leads, follow the directions below.
1.
Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
.
Plug the adaptor into the ANT IN terminal on the back of the TV.
❑
Antennaswith75ΩRoundLeads
Plug the antenna lead into the ANT IN terminal on the back of the TV.
❑
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1.
Connect both antenna leads to the combiner.
.
Plug the combiner into the ANT IN terminal on the bottom of the back panel.
ANT IN
UHF
VHF
ANT IN
UHF
VHF
ANT IN
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
❑
Cable without a Cable Box
Plug the incoming cable into the ANT IN terminal on the back of the TV.
N
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
❑
Connecting to a Cable Box that Descrambles All Channels
1.
Find the cable that is connected to the ANT OUT terminal on your cable box.
N
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
.
Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
ANT IN
ANT OUT
ANT IN
BN68-02143A_Eng.indb 9
English -
Continued...
2009-03-10 오후 5:36:07
❑
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
1.
Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
N
This terminal might be labeled “ANT IN”,
“VHF IN” or simply, “IN”.
ANT IN
.
Connect this cable to a two-way splitter.
.
Connect an Antenna cable between the
OUTPUT terminal on the splitter and the IN terminal on the cable box.
Incoming cable
Incoming cable
Splitter
Splitter
IN CABLE OUT
Cable Box
4.
Connect an Antenna cable between the ANT
OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
5.
Connect another cable between the other
OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
.
Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and the
ANT IN terminal on the rear of the TV.
Incoming cable
Incoming cable
Splitter
Splitter
IN CABLE OUT
Cable Box
IN CABLE OUT
Cable Box
A
B
RF (A/B)
Switch
A
B
RF (A/B)
Switch
TV Rear
IN CABLE OUT
A
B
Incoming cable
Splitter
ANT IN
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
BN68-02143A_Eng.indb 10
English - 10
2009-03-10 오후 5:36:08
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture.
1.
Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the DVD / Blu-Ray Player or
Cable Box / Satellite receiver (Set-Top Box).
TV Rear Panel TV Side Panel
DVD/Blu-Ray Player or Cable
Box / Satellite receiver
1 HDMI Cable (Not supplied)
or
N
N
N
N
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals
• using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-Ray Player or Cable Box /
Satellite receiver supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2(DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-Ray Player or Cable Box / Satellite receiver to confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Connecting a DVD /Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1.
Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI IN 2(DVI) jack on the TV and the DVI jack on the DVD / Blu-
Ray Player or Cable Box/Satellite receiver (Set-Top Box).
.
Connect Audio Cables between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the DVD/Blu-Ray Player or Cable Box / Satellite receiver.
DVD/Blu-Ray Player or Cable Box /
Satellite receiver
TV Rear Panel
Audio Cable (Not supplied)
1 HDMI/DVI Cable (Not supplied)
N
N
N
Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
When using an HDMI / DVI cable connection, you must use the HDMI IN 2(DVI) jack.
English - 11
BN68-02143A_Eng.indb 11 2009-03-10 오후 5:36:10
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) to your TV.
1.
Connect Component Cable between the
B
, P
R
] jacks on the TV and the COMPONENT [Y, P
B
, P
R
] jacks on the DVD / Blu-Ray Player or Cable Box / Satellite receiver(Set-Top Box).
.
Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD /
Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box).
TV Rear Panel
DVD / Blu-Ray Player or Cable Box
/ Satellite receiver
Audio Cable (Not supplied)
1 Component Cable (Not supplied)
N
N
N
Component video separates the video into Y (Luminance (brightness)), P
B
(Blue) and P
R
(Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
(Set-Top Box), match the color of the connection terminal to the cable.
Connecting a Camcorder
The side and rear panel jacks on your TV make it easy to connect a camcorder to your TV.
❑
Using an Video / Audio Cable
1.
Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
.
Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the Camcorder.
N
Each Camcorder has a different back panel configuration.
TV Side Panel
Camcorder
1 Video Cable (Not supplied)
Audio Cable (Not supplied)
N
When connecting a Camcorder, match the color of the connection terminal to the cable.
English - 1
BN68-02143A_Eng.indb 12 2009-03-10 오후 5:36:11
❑
Using an HDMI Cable
1.
Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the camcorder.
TV Rear Panel TV Side Panel
Camcorder
or
1 HDMI Cable (Not supplied)
N
Each Camcorder has a different back panel configuration.
Connecting a VCR
❑
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1.
Unplug the cable or antenna from the back of the TV.
.
Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
.
Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
4.
Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the
VCR.
5.
Connect Audio Cables between the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR
TV Rear Panel TV Side Panel
VCR Rear Panel
5 Audio Cable(Not supplied)
4 Video Cable(Not supplied)
Antenna cable(Not supplied)
N
N
N
N
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the
TV. Alternatively, connect the cable to the “R” jack.
If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
English - 1
BN68-02143A_Eng.indb 13 2009-03-10 오후 5:36:12
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV.
1.
Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack : Decrease the volume of the TV, and adjust the volume level with the system’s volume control.
TV Rear Panel
Digital Audio System
Optical Cable (Not supplied)
N
N
N
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-Ray player or Cable/
Satellite Box directly to an Amplifier or Home Theater, not the TV.
Connecting an Amplifier / DVD Home Theater
1.
Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/
DVD Home Theater.
When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust the volume level with the Amplifier’s volume control.
TV Rear Panel
Amplifier / DVD Home Theater
Audio Cable (Not supplied)
N
N
Each Amplifier / DVD Home Theater has a different back panel configuration.
When connecting an Amplifier / DVD Home Theater, match the color of the connection terminal to the cable.
English - 14
BN68-02143A_Eng.indb 14 2009-03-10 오후 5:36:14
Connecting a PC
❑
Using a D-Sub Cable
1.
Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer.
.
Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
TV Rear Panel
PC
PC Audio Cable (Not supplied)
1 D-Sub Cable (Not supplied)
❑
Using an HDMI/DVI Cable
1.
Connect an HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer.
.
Connect a 3.5 mm Stereo plug to 2RCA cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.
TV Rear Panel
PC
.5 mm Stereo plug to RCA Cable (Not supplied)
1 HDMI/DVI Cable (Not supplied)
N
N
N
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
English - 15
BN68-02143A_Eng.indb 15 2009-03-10 오후 5:36:16
Operation
Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button on the TV.
N
It may take a while for your TV to power on.
Changing Channels
❑
Using the Channel Buttons
Press the
CH
or
CH
button to change channels.
N
When you press the
CH
or
CH
button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels.
❑
Using the Number Buttons
Press the number buttons to go directly to a channel. For example, to select channel “27”, press “2”, then “7”.
N
For quick channel change, press the number buttons, then press the
ENTER
E button.
❑
Using the “ ” Button
The “ ” button is used to select stations that broadcast a digital signal.
1.
For example, for Channel "7-1", press "7", then " ”, then "
N
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
N
For quick channel change, press the number buttons, then press the
ENTER
E button.
❑
Using the PRE-CH Button to select the Previous Channel
1.
Press the
PRE-CH
button. The TV will switch to the last channel viewed.
N
To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the
PRE-CH
button to quickly alternate between them.
Adjusting the Volume
❑
Using the Volume Buttons
1.
Press the
VOL
or
VOL
button to increase or decrease the volume.
❑
Using the
M
MUTE Button
At any time, you can cut off the sound using the
M
MUTE
button.
1.
Press
M
MUTE
button and the sound cuts off.
The
M
will displayed on the screen.
.
To turn mute off, press the
M
MUTE
button again, or simply press the
VOL
or
VOL
button.
English - 1
BN68-02143A_Eng.indb 16 2009-03-10 오후 5:36:16
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing.
1.
Press the
TOOLS
button. The
Tools
menu will appear.
.
Press the ▲/▼ button to select a menu, then press the
ENTER
E
button.
.
Press the ▲/▼/◄/►/
ENTER
E
buttons to display, change, or use the selected items.
For a more detailed description of each function, refer to the corresponding page.
Tools
Anynet+ (HDMI-CEC)
•
•
•
•
•
•
Anynet+ (HDMI-CEC), see page 43
Sound Mode, see page 28
Sleep Timer, see page 33
Add to Favorite (or Delete from Favorite), see page 21
Switch to Cable (or Air), see page 20
Auto Adjustment, see page 27
Sound Mode
Sleep Timer
Add to Favorite
Switch to Cable
: Custom
: Off
U
Move Enter e
Exit
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1.
Press the
INFO
button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings.
TV #1
DTV Air
1-1
Dolby Digital
Fri, Dec 19 2:05 am
M. Spillane’s Mike Hammer
Bonocrunch
Prison Break
Next Program
1080i 16:9 English
1:55 am - 2:55 am
2:55 am - 3:55 am
O
Press the
INFO
button once more or wait approximately 10 seconds and it disappears automatically.
BN68-02143A_Eng.indb 17
English - 1
2009-03-10 오후 5:36:17
Viewing the Menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
1.
Press the
MENU
button.
The main menu is displayed on the screen. Its left side has the following icons:
Picture, Sound, Channel , Setup, Input,
Application, Support
.
.
Press the ▲ or ▼ button to select one of the icons.
Press the ◄ or ► button to access the icon’s sub-menu.
.
Press the ▲ or ▼ button to move to items in the menu.
Press the
ENTER
E
button to enter items in the menu.
4.
Press the ▲/▼/◄/► button to change the selected items.
Press the
RETURN
button to return to the previous menu.
5.
Press the
EXIT
button to exit from the menu.
Using the remote control buttons
Button
MENU
RETURN
EXIT
Operations
Display the main on-screen menu.
Return to the previous menu.
Exit the on-screen menu.
Button
▲/▼/◄/►/
ENTER
E
Operations
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
❑
Example: Setting the TV’s Brightness in the Picture Menu
Adjusting the Brightness to 0
1.
Press the
MENU
button to display the menu.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
: Standard
: 4
: 95
: 45
: 50
: 50
: G50/R50
.
Press the
ENTER
E
button to select
Picture
.
.
Press the ▲ or ▼ button to select
Brightness
.
4.
Press the
ENTER
E
button.
5.
Press the ◄ or ► button until the Brightness changes to 80.
.
Press the
ENTER
E
button.
N
Press the
EXIT
button to exit from the menu.
▲
Brightness
▼
Move
Brightness
▼
Move
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Advanced Settings
Picture Options
Picture Reset
: Standard
: 4
: 95
: 45
: 50
: 50
: G50/R50
: 4
: 95
: 45
: 50
: 50
: G50/R50
►
►
Adjust
Adjust
Enter
Enter
45
Return
80
Return
English - 1
BN68-02143A_Eng.indb 18 2009-03-10 오후 5:36:17
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
N
N
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1.
Press the
POWER
button on the remote control.
The message
Menu Language, Store Demo, Channels, and Time will be set.
is displayed.
.
Press the
ENTER
E
button, then
Select Language of the OSD.
menu is automatically displayed.
Press the
ENTER
E
button.
Press the ▲ or ▼ button to select language, then press the
ENTER
E
button. The message
Select ‘Home Use’ when installing this TV in your home
. is displayed.
.
Press the ◄ or ► button to select
Store Demo
or
Home Use
, then press the
ENTER
E button.
We recommend setting the TV to
Home Use
mode for the best picture in your home environment.
Plug & Play
Menu Language, Store Demo, Channels, and Time will be set.
Start
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Start
Start
Enter
N
Store Demo
mode is only intended for use in retail environments.
If the unit is accidentally set to
Store Demo
mode and you want to return to
Home
Use
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the
MENU
button on the TV for 5 seconds.
4.
The message
Select the Antenna source to memorize.
is displayed.
Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the
ENTER
E
button to select
Start
.
•
•
•
N
Air
:
Air
antenna signal.
Cable
:
Cable
antenna signal.
Auto
:
Air
and
Cable
antenna signals.
In
Cable
mode, you can select the correct signal source among
STD
,
HRC
, and
IRC
by pressing the ▲, ▼, ◄ or ► button, then press the
ENTER
E
button. If you have Digital cable, select the cable system signal source for both Analog and Digital.
Contact your local cable company to identify the type of cable system that exists in your particular area.
5.
The TV will begin memorizing all of the available channels.
Auto
U
Move
Plug & Play
Auto Program in Progress.
DTV Air : -- Air : --
DTV Cable : -- Cable : --
Stop
Plug & Play
Enjoy your TV.
OK
Enter
Air
Enter
Start
3%
Skip
4
Skip
N
N
To stop the search before it has finished, press the
ENTER
E
button with
Stop
selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
Press the
ENTER
E
button when channel memorization is complete.
.
The message
Set the Clock Mode.
is displayed. Press the
ENTER
E
button.
Press the ▲ or ▼ button to select
Auto
, then Press the
ENTER
E
button. The message
Set to daylight saving time.
is displayed.
If you select
Manual
,
Set current date and time
is displayed. For detailed descriptions about the
Manual
, refer to page 33.
.
Press the ▲ or ▼ button to select
Off
,
On
, or
Auto
, then press the
ENTER
E
button.
The image to select time zone in which you live is automatically displayed.
.
Press the ▲ or ▼ button to Select the time zone, then press the
ENTER
E
button.
If you have received a digital signal, the time will be set automatically. If not, see page 33 to set the clock.
.
The brief instruction on
How to get the best performance from your new HDTV
is displayed.
Press the
ENTER
E
button.
N
You can access the
HD Connection Guide
in the
Support
menu.
10.
Press the
ENTER
E
button. The message
Enjoy your TV.
is displayed.
When you have finished, press the
ENTER
E
button.
If you want to reset this feature...
1.
Press the
MENU
button to display the menu. Press the ▲ or ▼ button to select
Setup
, then press the
ENTER
E
button.
.
Press the
ENTER
E
button again to select
Plug & Play
. For further details on setting up options, press the
ENTER
E
button again.
N
The
Plug & Play
feature is only available in the TV mode.
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Melody
: English
: Off
: Medium
►
English - 1
BN68-02143A_Eng.indb 19 2009-03-10 오후 5:36:18
Channel Control
Storing Channels
❑
❑
Antenna→Air/Cable
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Antenna : Air
T
Press the
TOOLS
button to display
Tools
menu.
You can also switch the antenna by selecting
Tools
→
Switch to Cable
(or
Air
)
Auto Program
Clear Scrambled Channel
Channel List
•
•
•
N
Auto Program
N
N
Fine Tune
Air
:
Air
antenna signal.
Cable
:
Cable
antenna signal.
Auto
:
Air
and
Cable
antenna signals
STD
,
HRC
and
IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels.
The Auto program menu then reappears.
If you want to stop Auto Programming, press the
ENTER
E
button.
The
Stop Auto Program?
message will be displayed. Select
Yes
by pressing the
◄ or ► button, then press the
ENTER
E
button.
►
❑
❑
Clearing Scrambled Channel (Digital)
The
Clear Scrambled Channel
function is used to filter out scrambled channels after
Auto Program
is completed.
This process may take up to 20~30 minutes.
N
N
To stop searching scrambled channels: Press the
ENTER
E
button to select
Stop
.
Press the ◄ button to select
Yes
, then press the
ENTER
E
button.
This function is only available in
Cable
mode.
Fine Tune (Analog)
Use fine tuning to manually adjust a particular channel for optimal reception.
N
N
N
If you do not store the fine-tuned channel in memory, adjustments are not saved.
“*” will appear next to the name of fine-tuned channels.
To reset the fine tuning setting, press the ▼ button to select
Reset
, then press the
ENTER
E
button.
Clear Scrambled Channel
Removing scrambled channel.
DTV Cable 122
3%
Air 8*
Stop
Fine Tune
Reset
U
Move
L
Adjust
Enter
Fine Tuned
+5
Save
Return
Return
Managing Channels
❑
O
•
•
•
•
Channel List
Using this menu, you can Add / Delete or set Favorite channels and use the program guide for digital broadcasts.
Press the
CH LIST
button on the remote control to bring up the channel lists.
All Channels
: Shows all currently available channels.
Added Channels
: Shows all added channels.
Favorite
: Shows all favorite channels.
Programmed
: Shows all current reserved programs.
•
•
•
Using the Color buttons with the Channel List
Green
(Zoom): Enlarges or shrinks a channel number.
Yellow
(Select): Selects multiple channel lists.
T
TOOLS
(Tools): Displays the
Add
(or
Delete
),
Add to Favorite
(or
Delete from Favorite
),
Timer Viewing
,
Channel Name
N
Edit
,
Select All
,
Deselect All,
and
Auto Program
menus (The Options menus may differ depending on the situation.)
Channel Status Display Icons
♥ A channel set as a Favorite.
)
A reserved program c
A channel selected by pressing the yellow button.
(
A program currently being broadcast.
BN68-02143A_Eng.indb 20
English - 0
Continued...
2009-03-10 오후 5:36:18
❑
Channel List Option Menu (in All Channels / Added Channels / Favorite)
N
N
Press the
TOOLS
button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
N
N
N
N
All deleted channels will be shown on
All Channels
menu.
A gray-colored channel indicates the channel has been deleted.
The
Add
menu only appears for deleted channels.
You can also delete a channel to the
Added Channels
or
Favorite
menu in the same manner.
Add to Favorite / Delete from Favorite
You can set channels you watch frequently as favorites.
T
Press the
TOOLS
button to display
Tools
menu.
You can also set the favorite channel by selecting
Tools
→
Add to Favorite
(or
Delete from Favorite
)
N
N
O
The “♥” symbol will be displayed and the channel will be set as a favorite.
All favorite channels will be shown on
Favorite
menu.
To select the favorite channels you have set up, press the
FAV.CH
button on the remote control.
Air
Air
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Air
♥ TV #6
Air
♥ TV #7
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
Air
Select
T
Tools
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Air
♥ TV #6
Air
♥ TV #7
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
Air
Select
T
Tools
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
Timer Viewing
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel.
To reserve a program , set the current time first.
N
N
N
N
Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a program will be shown on
Programmed
menu.
Digital Program Guide and Viewing Reservation
: When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears.
You can reserve a program according to the procedures described above.
Air
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Air
♥ TV #6
Air
♥ TV #7
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
Air
Select
T
Tools
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
Select All / Deselect All
•
•
N
N
N
Select All
: You can select all the channels in the channel list.
Deselect All
: You can deselect all the selected channels in the channel list.
You can perform the add / delete, add to Favorite / delete from Favorite function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
The c mark appears to the left of the selected channels.
You can only select
Deselect All
when there is a selected channel.
Channel Name Edit (Analog)
Channels can labeled so that their call letters appear whenever the channel is selected.
N
The names of digital broadcasting channels are automatically assigned and cannot be labeled.
❑
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
N
Press the
TOOLS
button to use the option menu.
Change Info
Select to change a viewing reservation.
9/20/2009
5:02 pm
9/19/2009
5:20 pm
3
Change Info
Cancel Schedules
Information
Select All
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (You can also change the reservation information.)
Select All / Deselect All
You can select (or deselect) all channels in the channel list.
Air Zoom Select
T
Tools
E
Information
English - 1
BN68-02143A_Eng.indb 21 2009-03-10 오후 5:36:18
Picture Control
Changing the Picture Settings
❑
•
•
•
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Dynamic
: Select a high-definition picture for bright environments.
Standard
: Selects the optimal picture display for normal environments.
This setting is convenient for most situations.
Movie
: Selects a comfortable picture display for dark environments.
❑
Cell Light / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
•
•
•
•
•
•
N
N
N
N
Cell Light
Contrast
Color
Tint (G/R)
: Adjusts the pixel brightness. 10 is the brightest setting.
: Adjusts the contrast level.
Brightness
Sharpness
: Adjusts the brightness level.
: Adjusts the sharpness.
: Adjusts the color saturation of the picture using the bar on the screen.
: The closer to Red 100, the more saturated the red color becomes.
When you make changes to
Cell Light
,
Contrast
,
Brightness
,
Sharpness
,
Color,
or
Tint (G/R)
, the OSD will be adjusted accordingly.
When in
PC
mode,
Tint (G/R)
,
Sharpness
and
Color
are not available.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be significantly reduced if the brightness level is lowered, which will reduce the overall running cost.
❑
Advanced Settings
You can adjust the detailed settings for your screen including the color and contrast.
N
N
Advanced Settings
is available in
Standard
or
Movie
mode.
In
PC
mode, you can only make changes to
Gamma
and
White Balance
from among the
Advanced Settings
items.
•
•
•
•
Black Tone
You can select the black level on the screen to adjust the screen depth.
Off
: Turns the Black Adjust function off.
Dark
: Sets the black color depth to dark.
Darker
: Sets the black color depth to darker.
Darkest
: Sets the black color depth to darkest.
•
•
•
•
Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
Off
: Turns the Dynamic Contrast function off.
Low
: Sets Dynamic Contrast to low.
Medium
: Sets Dynamic Contrast to medium.
High
: Sets Dynamic Contrast to high.
Gamma
You can adjust the Primary Color (Red, Green, Blue) Intensity.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Advanced Settings
Black Tone
Dynamic Contrast
Gamma
Color Space
White Balance
Flesh Tone
Edge Enhancement
Advanced Settings
: Off
: Medium
: 0
: Native
: 0
: On
Move Enter
: Standard
: 4
: 95
: 45
: 50
: 50
: G50/R50
: Standard
: 4
: 95
: 45
: 50
: 50
: G50/R50
•
•
Color Space
Color Space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color.
Native
: Sets the color range wider than that of the input video source.
Auto
: Automatically sets the color range depending on the input video source.
►
►
►
Return
BN68-02143A_Eng.indb 22
English -
Continued...
2009-03-10 오후 5:36:19
•
•
•
•
•
•
•
White Balance
You can adjust the color temperature for more natural picture colors.
N
R-Offset
: Adjust the low level red intensity.
G-Offset
: Adjust the low level green intensity.
B-Offset
: Adjust the low level blue intensity.
R-Gain
: Adjusts the high level red intensity.
G-Gain
: Adjusts the high level green intensity.
B-Gain
: Adjusts the high level blue intensity.
Reset
: Resets the default white balance.
Changing the adjustment value will refresh the adjusted screen.
Flesh Tone
You can emphasize the pink flesh tone in the picture.
N
Changing the adjustment value will refresh the adjusted screen.
EdgeEnhancement→Off/On
You can emphasize object boundaries in the picture.
Black Tone
Dynamic Contrast
Gamma
Color Space
White Balance
Flesh Tone
Edge Enhancement
Advanced Settings
: Off
: Medium
: 0
: Native
: 0
: On
Move Enter
►
Return
❑
Picture Options
N
In
PC
mode, you can only make changes to the
Color Tone, Size
and
Screen Burn
Protection
from among the items in
Picture Options
.
ColorTone→Cool/Normal/Warm1/Warm2
You can select the most comfortable color tone for viewing.
N
N
Warm1
or
Warm
is only activated when the picture mode is
Movie
.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
•
•
O
•
•
•
•
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
1:
: Sets the picture to the 16:9 aspect ratio.
Zoom1
Zoom
: Stretches the 16:9 aspect ratio picture vertically.
: Stretches the
Wide Fit
Zoom 1
picture vertically.
: Stretches the picture both horizontally and vertically to display the optimal picture.
4:
: Sets the picture to the 4:3 aspect ratio.
Screen Fit
: Displays the full native HD signal that cannot be viewed using a normal TV.
Alternately, you can press the
P.SIZE
button on the remote control repeatedly to change the picture size.
Tint (G/R)
Advanced Settings
Picture Options
Picture Reset
Picture Options
Color Tone
Size
Digital NR
HDMI Black Level
Film Mode
Screen Burn Protection
: Normal
: 16:9
: Auto
: Normal
: Off
Move
: G50/R50
Enter Return
►
►
1: Zoom1 Zoom
Wide Fit 4: Screen Fit
N
N
N
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting
Zoom1
,
Zoom
or
Wide Fit
:
Press the ◄ or ► button to select
Position
, then press the
ENTER
E
button.
Press the ▲ or ▼ button to move the picture up and down.
After selecting
Screen Fit
in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may made need to center the picture:
Press the ◄ or ► button to select
Position
, then press the
ENTER
E
button.
Press the ▲, ▼, ◄ or ►button to move the picture.
Reset
: Press the ◄ or ► button to select
Reset
, then press the
ENTER
E
button. The TV will be reset to 16:9.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
English -
Continued...
BN68-02143A_Eng.indb 23 2009-03-10 오후 5:36:21
N
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
In
PC
Mode, only
1:
and
4:
mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
ATV, Video, Component (480i, 480p)
Component (720p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
PC
Picture Size
1:, Zoom1, Zoom, 4:
1:, Wide Fit, 4:
1:, 4:, Wide Fit, Screen Fit
1:, 4:
•
•
•
•
•
Digital NR
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
Tint (G/R) : G50/R50
Off
: Turns the Digital NR function off.
Low
: Sets Digital NR to low.
Medium
: Sets Digital NR to medium.
High
: Sets Digital NR to high.
Auto
: Sets Digital NR to Auto.
Advanced Settings
Picture Options
Picture Reset
►
•
•
HDMI Black Level
You can directly select the black level on the screen to adjust the screen depth.
N
Normal
Low
: The screen gets brighter.
: The screen gets darker.
This function is active only when an external device is connected to the TV via HDMI.
HDMI Black Level
function may not be compatible with all external devices.
Film Mode
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
•
•
N
Off
: Basic video image processing applied and No auto-detection for film-based programs.
Auto
: Automatically adjusts for the best image quality between film and video programs.
Film mode
is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
Picture Options
Color Tone
Size
Digital NR
HDMI Black Level
Film Mode
Screen Burn Protection
: Normal
: 16:9
: Auto
: Normal
: Off
Move Enter
►
Return
Screen Burn Protection
Configures the
Screen Burn Protection
options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Preventing Screen Burn-in
Pixel Shift
Scrolling
Side Gray
Screen Burn Protection
Move
: Dark
Enter
►
Return
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
•
N
Pixel Shift
: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent afterimages on the screen.
Optimum condition for pixel shift;
Item
0~4
TV/AV/Component/HDMI/PC
4
Horizontal
Vertical
Time(min)
0~4
1~4min.
4
2 min
•
Side Gray :
When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
-
-
Dark:
When you set the screen ratio to 4:3, it darkens the left and right sides.
Light:
When you set the screen ratio to 4:3, it brightens the left and right sides.
English - 4
BN68-02143A_Eng.indb 24 2009-03-10 오후 5:36:22
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select Scrolling to help remove screen burn artifacts.
• Scrolling : This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.
N
N
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove afterimages on the screen. If the after-image is not removed after performing the function, repeat the function again.
Press any key on the remote control to cancel this feature.
❑
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
N
Select a picture mode to be reset. The reset is performed for each picture mode.
Advanced Settings
Picture Options
Picture Reset
►
BN68-02143A_Eng.indb 25
English - 5
2009-03-10 오후 5:36:22
PC Display
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on
Control Panel
on the Windows start menu.
.
When the control panel window appears, click on
Appearance and Themes
and a display dialog-box will appear.
.
When the control panel window appears, click on
Display
and a display dialog-box will appear.
4.
Navigate to the
Settings
tab on the display dialog-box. The correct size setting (resolution)
Optimum : 1920 X 1080 pixels. If a vertical frequency option exists on your display settings dialog box, the correct value is
0
or
0 Hz
. Otherwise, just click
OK
and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
Resolution
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 800
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
Horizontal Frequency (kHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
44.772
56.456
75.231
60.023
67.500
49.702
62.795
60.000
63.981
79.976
47.712
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
55.935
70.635
65.290
52.500
74.620
Vertical Frequency (Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
59.855
74.777
74.857
75.029
75.000
59.810
74.934
60.000
60.020
75.025
60.015
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
59.887
74.984
59.954
70.000
70.000
N
VESA DMT /
DTV CEA
1920 x 1080p 67.500
60.000
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
Pixel Clock Frequency (MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
74.500
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
83.500
106.500
108.000
108.000
135.000
85.500
106.500
136.750
146.250
89.040
128.943
148.500
Sync Polarity (H/V)
+ / -
- / +
- / -
- / -
- / +
- / +
- / +
- / +
- / +
- / +
+ / +
+ / +
- / +
- / +
+ / +
+ / +
+ / +
+ / +
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
- / +
- / +
- / +
- / +
- / -
+ / +
English -
BN68-02143A_Eng.indb 26 2009-03-10 오후 5:36:22
Setting up the TV with your PC
❑
Auto Adjustment
Use the Auto
Adjust function
to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
T
N
N
Press the
TOOLS
button to display
Tools
menu.
You can also set the Auto Adjustment by selecting
Tools
→
Auto Adjustment
.
Preset: Press the
SOURCE
button to select
PC
mode.
This function does not work in DVI-Digital mode.
❑
Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen.
N
Preset: Press the
SOURCE
button to select
PC
mode.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the
Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Coarse
Fine
PC Position
Image Reset
Brightness
Sharpness
Auto Adjustment
Screen
Advanced Settings
Picture Options
Picture Reset
: 45
: 50
Screen
Move
PC Position
Enter
Move Enter
Return
Return
►
50 ►
38
BN68-02143A_Eng.indb 27
English -
2009-03-10 오후 5:36:22
Sound Control
Changing the Sound Settings
❑
•
•
•
•
•
Mode
You can select the sound mode to best suit the programming you’re watching.
Standard
: This sound mode is for general purposes.
Music
: Music mode enables you to listen to music as if you are sitting in a concert hall.
Movie
: Movie mode enables you to experience live and full movie sound as if you are sitting in a movie theater.
Clear Voice
: Emphasizes voice over other sounds. Select this sound mode when watching news, soap operas, or documentaries.
Custom
: You can customize the sound settings to suit your personal preferences.
T
Press the
TOOLS
button to display
Tools
menu.
You can also set the sound mods by selecting
Tools
→
Sound Mode
❑
•
•
•
•
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Mode
: Selects the sound mode among the predefined settings.
Balance L/R
: Adjusts the balance between the right and left speaker.
100Hz, 00Hz, 1kHz, kHz, 10kHz
(Bandwidth Adjustment): Adjusts the level of different bandwidth frequencies.
Reset
: Resets the equalizer settings to the default values.
❑
SRSTruSurroundHD→Off/On
SRS TruSurround HD enables you to enjoy a virtual 5.1 Surround Sound effect over the TV's two speakers.
This function provides not only rich deep bass also improves high frequency resolution.
O
You can select these options simply by pressing the
SRS
button on the remote control.
Mode : Custom
Equalizer
SRS TruSurround HD : Off
Preferred Language : English
Multi-Track Sound : Stereo
Auto Volume
Speaker Select
: Off
: TV Speaker
►
Mode
Balance
100Hz
300Hz
1kHz
3kHz
10kHz
-
-
L
-
-
-
▼
Move
Equalizer
: Custom
Adjust Enter
+
+
R
+
+
+
Return
TruSurround HD
, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD
technology is incorporated under license from SRS Labs, Inc.
❑
Preferred Language (Digital)
Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
N
O
You can only select the language from among the actual languages being broadcast.
You can listen in a language other than the
Preferred Language
by pressing the
MTS
button on the remote control.
❑
Multi-Track Sound (MTS) (Analog)
•
•
•
N
O
Mono
: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo
: Choose for channels that are broadcasting in stereo.
SAP
: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Depending on the particular program being broadcast, you can listen to
Mono,
Stereo,
or
SAP.
Press the
MTS
button on the remote control repeatedly to select
Mono
,
Stereo,
or
SAP
.
❑
AutoVolume→Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Continued...
English -
BN68-02143A_Eng.indb 28 2009-03-10 오후 5:36:23
❑
•
•
Speaker Select
When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers.
N
N
External Speaker
: Uses the external speakers(Home Theater) to output sound.
TV Speaker
: Uses the TV speakers to output sound.
If you select
External Speaker
in the
Speaker Select
menu, the sound settings will be limited.
The volume buttons and
M
MUTE
buttons do not operate when the
Speaker Select
is set to
External Speaker
.
Please set the volume on your Home theater.
TV Speaker
External Speaker
Video No Signal
TV's Internal Speakers
TV
/
AV
/
Component
/
PC
/
HDMI
Speaker Output
Mute
Mute
Multi-Track Sound
Auto Volume
Speaker Select
Sound Reset
: Stereo
: Off
: TV Speaker
►
Audio Out (Optical, L / R Out) to Sound System
TV
/
AV
/
Component
/
PC
/
HDMI
Sound Output
Sound Output
Mute
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
❑
•
•
•
Sound Reset
You can restore the Sound settings to the factory defaults.
Reset All
: All the sound values return to default settings.
Reset Sound Mode
: Current sound values return to default settings.
Cancel
: Select the sound reset options.
Function Description
Configuring the Setup Menu
❑
❑
Language
You can set the menu language.
Plug & Play
Language : English
GameMode→Off/On
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game menu.
Time
Game Mode
V-Chip
: Off
When the Game Mode is On
Picture mode is automatically changed to
Standard
and cannot be changed.
Sound mode is automatically changed to
Custom
and cannot be changed. Adjust the sound using the equalizer.
•
•
•
N
N
N
N
N
N
Caption
Melody
Energy Saving
: Medium
: Off
The
Reset
in the Sound menu is activated.
Reset
function initializes the
Equalizer
settings to the factory default setting.
Game Mode
is not available in regular TV mode or
Game Mode
set to
Off
.
If the picture is poor when an external device is connected to the TV, check if
Game Mode
is
On
.
If you display the TV menu in
Game mode
, the screen shakes slightly.
The mark ( ) appears on the screen which means that
Game Mode
is on with the selected source.
This function supports only game function.
Game mode
is not available in
PC
mode.
►
BN68-02143A_Eng.indb 29
English -
Continued...
2009-03-10 오후 5:36:23
❑
V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed.
N
V-Chip
function is not available in
HDMI
,
Component
or
PC
mode.
N
N
N
The default PIN number of a new TV set is ‘0-0-0-0’.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to ‘0-0-0-0’ : Power Off. →
M
MUTE
→ → →
4
→ Power On.
Allow all
: Press to unlock all TV ratings. /
Block all
: Press to lock all TV ratings.
V-ChipLock→Off/On
Turns the V-Chip function on/off.
TV Parental Guidelines
Move Enter
Allow All
Block All
Return
TV Parental Guidelines
First, set up a personal identification number (PIN) and enable the V-Chip.
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
•
Base Categories
•
N
-
TV-Y
: Young children /
TV-Y
: Children 7 and over /
TV-G
: General audience /
TV-PG
: Parental guidance /
TV-14
: Viewers 14 and over /
TV-MA
: Mature audience
Sub-ratings
-
All
: Lock all TV ratings. /
FV
: Fantasy violence /
V
: Violence /
S
: Sexual situation
/
L
: Adult Language /
D
: Sexually Suggestive Dialog
The V-Chip will automatically block certain categories that are more restrictive.
For example, if you block
TV-Y
category, then
TV-Y
will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (
TV-G, TV-PG, TV-14
and
TVMA
). The sub-ratings (
D, L, S, V
) work together similarly.
•
•
•
•
•
•
•
MPAA Rating
The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
N
N
G
R
X
: General audience (no restrictions).
PG
NR
: Parental guidance suggested.
PG-1
NC-1
: Parents strongly cautioned.
: Restricted. Children under 17 should be accompanied by an adult.
: No children under age 17.
: Adults only.
: Not rated.
While a particular category is selected, press the
ENTER
E
button to activate it.
The “
\
” symbol will be displayed. Press the
ENTER
E
button to block or unblock the category.
The V-Chip will automatically block any category that is
More restrictive
.
For example, if you block the
PG-1
category, then
R
,
NC-1
and
X
will automatically be blocked also.
MPAA Rating
Move
Allow All
Block All
Enter
•
•
•
•
•
•
Canadian English
You can block TV programs depending on their Canadian English rating.
N
C
: Programming intended for children under age 8.
C+
: Programming generally considered acceptable for children 8 years and over to watch on their own.
G
: General programming, suitable for all audiences.
PG
: Parental Guidance.
14+
: Programming contains themes or content which may not be suitable for viewers under the age of 14.
1+
: Adult programming.
The V-Chip will automatically block any category that is
More restrictive
.
For example, if you block
G
category, then
PG, 14+
and
1+
will automatically be blocked also.
•
•
•
•
•
Canadian French
You can block TV programs depending on their French Canadian rating.
N
G
: General
ans+
: Programming generally considered acceptable for children 8 years and over to watch on their own.
1 ans+
: Programming may not be suitable for children under the age of 13.
1 ans+
: Programming is not suitable for children under the age of 16.
1 ans+
: Programming restricted to adults.
The V-Chip will automatically block any category that is
More restrictive
.
For example, if you block
ans+
category, then
1 ans+, 1 ans+
and
1 ans+
will automatically be blocked also.
Canadian French
Move
Allow All
Block All
Enter
Return
Return
Continued...
English - 0
BN68-02143A_Eng.indb 30 2009-03-10 오후 5:36:24
Downloadable U.S. Rating
Parental restriction information can be used while watching DTV channels
N
N
N
N
N
N
N
If information is not downloaded from the broadcasting station, the
Downloadable U.S.
Rating
menu is deactivated.
Parental restriction information is automatically downloaded while watching DTV channels.
It may take several seconds.
The
Downloadable U.S. Rating
menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.
Parental restriction levels differ depending on the broadcasting station. The default menu name and
Downloadable U.S. Rating
changes depending on the downloaded information.
Even if you set the On-screen display to your desired language, the
Downloadable U.S.
Rating
menu will appear in English only.
The rating will automatically block certain categories that are more restrictive.
The rating titles (For example: Humor Level..etc) and TV ratings
(For example:
DH, MH, H
..etc) may differ depending on the broadcasting station.
Rating title
Downloadable U.S. Rating
Humor Level
DH
MH
H
VH
EH
The number of current rating information
Move
►
Enter
1/2
Allow All
Block All
Return
The number of all rating information
Change PIN
You can change four-digit code to use the V-Chip function.
N
N
The default PIN code for a new TV set is '0-0-0-0'.
If you change the PIN code completely, the message
PIN is changed successfully.
is displayed.
How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear.
1.
Enter your PIN.
To resume normal viewing, tune to a different channel using CH
> button. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an “emergency escape”:
N
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to '0-0-0-0' : Power Off. →
M
MUTE
→ → →
4
→ Power On.
Received Rating : TV-14/NL
This channel is blocked by a Parental Lock. Please enter the PIN to unblock.
CH
Change 0~9 Enter PIN
❑
Caption (On-Screen Text Messages)
N
N
O
The Caption feature doesn’t work in
Component
,
HDMI
or
PC
modes.
The availability of captions depends on the program being broadcast.
Press the
CC
button on the remote control to turn the
Caption On
or
Off
.
Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog
Caption function may operate on digital channels.)
•
Caption Mode
:
Default, CC1~CC4, Text1~Text4
Game Mode
V-Chip
Caption
Melody
: Off
: Medium
Energy Saving : Off
•
•
Digital
The Digital Captions function operates on digital channels.
-
-
-
-
-
-
-
Caption Mode
:
Default
,
Service1~Service
,
CC1~CC4
,
Text1~Text4
Digital Caption Options
Size :
You can select the caption font size.
Font Style :
You can select the caption font.
Foreground Color
: You can select the color of the captions.
Background Color
: You can select the background color for the captions.
Foreground Opacity
: You can select the opacity of the caption foreground.
Background Opacity
: You can select the opacity of the background for the captions.
Return to Default
: Returns to the default settings of the broadcasting station for the captions.
N
N
N
N
N
Caption
Caption Mode
Caption
Digital Caption Options
Move
: On
: Default
Digital Caption Options
are available only when
Default
and
Service1~Service
can be selected in
Caption Mode
.
Service1~
in digital caption mode may not be available depending on the broadcast.
Default
means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color.
Foreground Opacity and Background Opacity cannot be both set to Transparent.
Enter Return
►
►
English - 1
BN68-02143A_Eng.indb 31 2009-03-10 오후 5:36:24
❑
•
•
•
•
Melody
A melody sound can be set to come on when the TV is powered On or Off.
N
Off
: Turns off the melody function.
Low
: Sets the melody volume to low.
Medium
: Sets the melody volume to medium.
High
: Sets the melody volume to high.
The Melody does not play.
-
-
When no sound is output from the TV because the
M
MUTE
button has been pressed.
When no sound is output from the TV because the volume has been reduced to minimum with the
VOL
button.
When the TV is turned off with the Sleep Timer function.
V-Chip
Caption
Melody
Energy Saving
: Medium
: Off
❑
•
•
•
•
Energy Saving
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
Energy
Saving
mode option to
High
to reduce eye fatigue as well as power consumption.
Off:
Turns the Energy Saving function off.
Low:
Sets the Energy Saving function to low.
Medium:
Sets the Energy Saving function to medium.
High:
Sets the Energy Saving function to maximum.
►
BN68-02143A_Eng.indb 32
English -
2009-03-10 오후 5:36:24
Setting the Time
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)
❑
Plug & Play
Language
Time
: English
Time
1.
Press the
MENU
button to display the menu.
.
Press the ▲ or ▼ button to select
Setup
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select
Time
, then press the
ENTER
E
button.
Game Mode
V-Chip
Caption
Melody
Energy Saving
: Off
: Medium
: Off
Clock
•
•
Clock Mode
→
Auto
/
Manual
You can set up the current time manually or automatically.
Clock Set
You can set the current time manually.
N
N
This function is only available when
Clock Mode
is set to
Manual
.
You can set the
Month, Day, Year, Hour,
or
Minute
directly by pressing the number buttons on the remote control.
•
Clock Mode
Clock Set
Time Zone
DST
Clock
: Auto
: Eastern
: Off
►
Move Enter Return
Time Zone
Select your time zone.
N
N
N
This function is only available when
Clock Mode
is set to
Auto
.
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time automatically.
•
DST
(Daylight Saving Time) →
Off
/
On
/
Auto
Switches the Daylight Saving Time function on or off.
N
This function is only available when
Clock Mode
is set to
Auto
.
►
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(30, 60, 90, 120, 150 and 180 minutes).
T
Press the
TOOLS
button to display
Tools
menu.
You can also set the sleep timer by selecting
Tools→SleepTimer
.
•
•
Timer 1 / Timer / Timer
Use this feature to set the TV to turn on or off at a desired time. 3 different On/Off times can be set. You must set the clock first.
•
•
-
-
-
-
On Time
: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate
.)
Off Time
: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate
.)
Volume
: Set the desired volume level.
Contents
: When the On Time is activate, you can turn on a specific channel or play back contents such as photo or audio files.
-
TV/USB
: Select TV or USB.
(Make sure that an USB device is connected to your TV.)
Antenna
: Select Air or Cable.
Channel
: Select the desired channel.
Music
: Select the folder containing MP3 files on the USB device.
Photo
: Select the folder containing JPEG files on the USB device.
•
Repeat
: Select
Once
,
Everyday
,
Mon~Fri
,
Mon~Sat
,
Sat~Sun
or
Manual
.
N
When
Manual
is selected, press the ►button to select the desired day of the week.
Press the
ENTER
E
button over the desired day and the c
mark will appear.
N
N
Clock
Sleep Timer
Timer 1
Timer 2
Timer 3
On Time
12
Off Time
12 00
Volume Contents
10 TV
Repeat Sun Mon Tue Wed The Fri Sat
Once
Move
00
Move
30 min.
60 min.
90 min.
120 min.
150 min.
180 min.
Timer 1
Air
Adjust am am
3
Enter
Enter
Return
Inactivate
Inactivate
Return
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.
English -
BN68-02143A_Eng.indb 33 2009-03-10 오후 5:36:25
Source List / Edit Name
❑
Source List
Use to select TV or other external input sources such as DVD / Blu-Ray players / Cable boxes / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.
TV, AV1, AV, Component1, Component, PC, HDMI1, HDMI/DVI, HDMI.
N
N
You can choose only those external devices that are connected to the TV. In the
Source List
, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
•
•
Red
(Refresh): Refreshes the connected external devices.
Press this if your Source is on and connected, but does not appear in the list.
T
TOOLS
(Tools): Displays the
Edit Name
and
Information
menus.
O
Press the
SOURCE
button on the remote control to view an external signal source.
❑
Edit Name
You can name the device connected to the input jacks to make your input source selection easier.
Source List
Edit Name
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game /
Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA
N
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN
2(DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name menu.
AV1
AV2
Component1
Component2
PC
HDMI1
HDMI2/DVI
Edit Name
Move
▼
----
VCR
DVD
Cable STB
Satellite STB
PVR STB
Enter
Support
Return
❑
Self Diagnosis
•
•
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists.
N
Does the problem still exist with this test photo?
appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select
Yes.
If the test pattern is properly displayed, select
No.
Yes
: There may be a problem with the TV. Contact the Samsung Call center.
No
: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.
Self Diagnosis
Software Upgrade
HD Connection Guide
Contact Samsung
►
•
•
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV.
N
N
N
Picture Test
Self Diagnosis
►
Does the problem still exist with this sound test?
appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select
Yes
.
If you can hear sound from the speakers, select
No
.
Sound Test
Signal Strength
Move Enter Return
Yes
: There may be a problem with the TV. Contact the Samsung Call center.
No
: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
Speaker Select
is set to
TV speaker
in the Sound menu.
The melody will be heard during the test even if
Speaker Select
is set to
External Speaker
or the sound is muted by pressing the
M
MUTE
button.
BN68-02143A_Eng.indb 34
English - 4
Continued...
2009-03-10 오후 5:36:25
Signal Strength (Digital)
Unlike analog channels, which can vary in reception quality from snowy to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
N
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
Signal Strength
TV side Panel
OK
Enter Return
USB Drive
❑
Software Upgrade
Samsung may offer upgrades for your TV’s firmware in the future. Please visit Samsung.
com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port.
N
N
Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade.
When software is upgraded, video and audio settings you have made will return to
N their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
Self Diagnosis
Software Upgrade
HD Connection Guide
Contact Samsung
►
Software Upgrade
Scanning for USB It may take up to 30 seconds.
❑
HD Connection Guide
A brief instruction on How to get the best performance from your new
HDTV
is displayed.
Follow the guide for the best connection method for your HD devices.
❑
Contact Samsung
You can know the Samsung Call center, website and information for product.
N
You can move the previous or next page by pressing the ▲ or ▼ button.
HD Connection Guide
How to get the best performance from your new HDTV.
Step 1.
Connect the HD box to the TV using the Component video (Red, Green, Blue)
▼ and audio (Red, White) cables or HDMI Cable.
HD box
HDMI Cable
▼
TV rear view
Component Cable
Step 2.
Press the Source button on the Remote to select HDMI or Component
●
Input.
Depending on your location, HD programming may also be viewed using as off-air
● antenna.
For more details, please refer to HD Connections in the Owner Manual.
Return
Contact Samsung
Please contact Samsung if you are having problems operating this TV.
Contact Samsung :
- Call Center : 1-800-SAMSUNG (7267864)
- Web Site : www.samsung.com
To obtain latest firmware of your TV, please visit the Samsung website.
www.samsung.com >“Support”> “Download Center”
OK
Page Up/Down Enter
1/2
Return
English - 5
BN68-02143A_Eng.indb 35 2009-03-10 오후 5:36:25
Media Play
Using the Media Play Function
This function enables you to view and listen to photo (JPEG) and audio files (MP) saved on a USB Mass Storage Class (MSC) device.
1.
Press the
POWER
button on the remote control or front panel.
N
The TV is powered on.
TV Side Panel
.
Connect a USB device containing JPEG and/or MP3 files to the
USB jack on the side of the TV.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
If you enter the Media Play mode with no USB device connected the message
There is no device connected.
will appear. In this case, insert the USB device, exit the screen by pressing the
MEDIA.P
button on the remote control and enter the Media
Play screen again.
PTP(Picture Transfer Protocol) is supported, but MTP(Media Transfer Protocol) is not supported.
The file system only supports FAT16/32 (The NTFS file system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
USB Drive
Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Recommended image resolution for Media Play is 6 mega pixels.
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG files, and the PTP device supports JPEG files only.
We recommend the sequential jpeg, and progressive jpeg format. Progressive jpeg uses a lot of memory and decoding may fail.
The Media Play mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz).
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file.
If the horizontal resolution of an image is higher than 5000, it cannot be decoded.
If the vertical resolution of an image is higher than 4000, it cannot be decoded.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360x8640 pixels
For unsupported or corrupted files, the Not Supported File Format message is displayed
The Photo or Music List displays up to 300 folders or files.
MP3 files with DRM downloaded from pay sites are not played.
DRM(Digital Rights Management) prevents illegal uses of digital media for copyright protection.
❑
Using the Remote Control Button in the Media Play Menu
Button Operations
Move the cursor and select an item.
Select the currently selected item.
During a Slide Show or Music Play:
- Pressing the
ENTER
E
button during play pauses the play.
- Pressing the
ENTER
E
button during pause resumes the play.
Play or pause the Slide Show or Music file.
Return to the previous menu.
Run various functions from the Photo and Music menus.
Stop the current Slide Show or Music file.
Page Up or Down (file list item)
Stop the current function and return to the
Media Play
main menu.
English -
Continued...
BN68-02143A_Eng.indb 36 2009-03-10 오후 5:36:26
❑
Using the Media Play Menu
1.
Press the
MENU
button. Press the ▲ or ▼ button to select
Application
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select
Media Play (USB)
, then press the
ENTER
E button.
N
The
Media Play
menu is displayed.
USB
Memorycard
315.0MB/495.0MB Free
E
Enter e
Exit
O
Press the
MEDIA.P
button on the remote control to display the
Media Play
menu.
.
Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the
ENTER
E
button.
N
N
The
Media Play
connected to TV.
menu differs depending on the USB Memory Device
Some devices may not be supported due to compatibility problems.
4.
Press the ◄ or ► button to select an icon (
Photo, Music, Setup
), then press the
ENTER
E
button.
N
To exit
Media Play
mode, press the
MEDIA.P
button on the remote control.
Photo
Memorycard
315.0MB/495.0MB Free
Music Setup
L
Move
E
Enter
R
Return
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.
1.
Complete Steps 1 to 2 of
Using the Media Play Menu
. (Refer to page 37)
.
Press the ◄ or ► button to move to
Photo
, then press the
ENTER
E
button.
The saved file information is displayed as a folder or file.
.
Press the ▲, ▼, ◄ and ► buttons to select a file.
•
•
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Memorycard
315.0MB/495.0MB Free
Pressing the
ENTER
E
button over a photo icon shows the currently selected photo in full screen.
Pressing the
ENTER
E
button over a folder icon shows the JPEG files included in the folder.
To exit
Media Play
mode, press the
MEDIA.P
button on the remote control.
Moving to a photo may take a few seconds to load the file. At this point, the icon will appear at the top left of the screen.
It takes time to show JPEG files as Thumbnail images.
Photo
400*340
53 KB
This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed.
The files are displayed on a page. 15 thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom,
Jan 18, 2009
1 / 40
Memorycard
315.0MB/495.0MB Free from 1 to 15.
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Folders are displayed first and they are followed by all JPEG files in the current folder.
Photo
IMG_0550.JPG
Upper Folder
IMG_055_JPG
IMG_05.JPG
Select
Music
IMG_05.JPG
IMG_055_JPG
IMG_05.JPG
IMG_04.JPG
IMG_05_JPG
IMG_05.JPG
IMG_044.JPG
IMG_05_JPG
IMG_05.JPG
▶▶
Setup
L
Move
E
Enter
R
Return
1/3 Page
IMG_0550.JPG
IMG_05.JPG
IMG_050.JPG
Move
INFO
Option
E
Enter
R
Return
The folders and MP3 files appear in the order of the time they were saved to the USB memory device.
The folders and JPEG files appear in the order of the time they were saved to the USB memory device.
If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.
While a full screen is displayed, ◄ or ► button will let you see another photo image in the same folder.
Press the button when a Photo icon is selected to start a Slide Show.
Photos without EXIT information may not be displayed as thumbnail images in the PHOTO LIST depending on the picture quality and resolution.
▶▶
Continued...
English -
BN68-02143A_Eng.indb 37 2009-03-10 오후 5:36:33
❑
Viewing a Slide Show
4.
Press the
INFO
button to display the option
(
View, Start Slideshow, Delete, Delete All, Deselect All
).
5.
Press the ▲ or ▼ button to select
Start Slideshow
then press the
ENTER
E button.
N
During the slide show, files are displayed in order from the currently shown file.
N
MP3 files can be automatically played during the Slide Show if the Default
Background Music
is set to
On
. To enable this function, MP3 files and other photo files must be located in the same folder on the USB Memory Device.
.
Press the
INFO
button during the slide show to set the following options
(
Slide Show Speed
,
Background Music
,
Background Music Setting
,
List
).
Press the ▲ or ▼ button to select the option, then press the
ENTER
E
button.
After setting the option, press the
ENTER
E
button to make a change.
Photo
400*340
53 KB
Jan 18, 2009
1 / 40
View
Start Slideshow
Delete
Delete All
Deselect All
Pause
IMG_0550.JPG
▶▶
1/3 Page ▶▶
Upper Folder
IMG_05.JPG
IMG_04.JPG
IMG_044.JPG
IMG_0550.JPG
IMG_055.JPG
IMG_055.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
Select
IMG_05.PG
IMG_05.JPG
IMG_05.JPG
IMG_050.JPG
Move
INFO
Option
E
Enter
R
Return
❑
Using the Menu during a Slide Show
Slide Show Speed
Select to control the slide show speed.
Press the ▲ or ▼ button to select the required option(
Fast, Normal, Slow
), then press the
ENTER
E
button.
Background Music
Select to choose whether you want to play an MP3 file during a slide show.
Press the ▲ or ▼ button to select the required option(
On
,
Off
), then press the
ENTER
E
button.
Background Music Setting
While the slide show is in progress, MP3 files and folders under the same directory are displayed.
Select a folder using the ▲ or ▼ button and press the
ENTER
E
button.
Press the
ENTER
E
button again to return to the slide show screen. The selected background music is played.
N
If you turn
Off
the
Background Music
, even if the
Background Music Setting
have been set up, the background music will not be played.
List
The file information is displayed as a folder or JPEG file.
N
To exit
Media Play
mode, press the
MEDIA.P
button on the remote control.
Slide Show Speed : Slow
Background Music : Off
Background Music Setting
List
INFO
Exit
Fast
Nomal
Slow
Pause
Slide Show Speed : Slow
Background Music : On
Background Music Setting
List
INFO
Exit
On
Off
Upper Folder
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
◄◄ 1/2 Page ►►
Select
U
Move
E
Enter
R
Return
BN68-02143A_Eng.indb 38
English -
Continued...
2009-03-10 오후 5:36:40
▶▶
1/3 Page ▶▶
Photo
400*340
53 KB
Jan 18, 2009
1 / 40
View
Start Slideshow
Delete
Delete All
Deselect All
IMG_0550.JPG
Upper Folder
IMG_05.JPG
IMG_04.JPG
IMG_044.JPG
IMG_0550.JPG
IMG_055.JPG
IMG_055.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
Select
IMG_05.PG
IMG_05.JPG
IMG_05.JPG
IMG_050.JPG
Move
INFO
Option
E
Enter
R
Return
N
When selecting a photo file, the photo file information is displayed on the left side of the TV screen, such as the resolution, the date modified and the order of the file in the current directory (e.g. 10th out of 15).
: Folder icon
: Photo icon
: Move to the previous folder stage icon
Photo
400*340
53 KB
Jan 18, 2009
1 / 40
Memorycard
315.0MB/495.0MB
IMG_0550.JPG
Upper Folder
IMG_05.JPG
IMG_04.JPG
IMG_044.JPG
IMG_044.JPG
IMG_055.JPG
IMG_055.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
IMG_05.JPG
Select
IMG_05.JPG
IMG_05.JPG
IMG_050.JPG
Move
INFO
Option
E
Enter
R
Return
Such as the resolution
File size
Date modified
Photo
▶▶
1/3 Page ▶▶
400*340
53 KB
Jan 18, 2009
1 / 40
❑
Using the Option Menu
1.
Complete Steps 1 to 2 of
Using the Media Play Menu
. (Refer to page 37)
.
Press the ◄ or ► button to move to
Photo
, then press the
ENTER
E
button.
The saved file information is displayed as a folder or file.
.
Press the ▲, ▼, ◄ and ► button to select a file, then press the
ENTER
E button. Pressing the button over a photo thumbnail displays the photo in full screen.
4.
Press the
INFO
button to display the option
(
Start Slideshow
,
Zoom
,
Rotate
,
List
)
•
•
Zoom
Press the ▲ or ▼ button to select
Zoom
, then press the
ENTER
E
button.
Each time the ▲ or ▼ button is pressed, the photo size increases.
(
x1
→
x
→
x4
)
•
N
-
-
x1
: Restore a photo to its original size.
x
: Zoom-in to a photo x2.
-
x4
: Zoom-in to a photo x4.
To pan up/down/left/right in the zoomed-in photo, press the
INFO
button to remove option menu, then press the ▲, ▼, ◄, and ► buttons.
The
Start Slideshow
,
Rotate
option is disabled when the
Zoom
option is selected.
•
•
Rotate
Press the ▲ or ▼ button to select Rotate, then press the
ENTER
E
button.
Each time the ▲ or ▼ button is pressed, the photo rotates repeatedly.
N
N
-
-
-
-
0º
: This rotates a photo to its original position
0º
: This rotates a photo by 90 degrees
10º
: This rotates a photo by 180 degrees
0º
: This rotates a photo by 270 degrees
The rotated file is not saved.
The
Start Slideshow, Zoom
option is disabled when the
Rotate
option is selected.
•
•
List
Press the ▲ or ▼ button to select
List
, then press the
ENTER
E
button.
Move to the photo list.
Order of the file in the current directory
Start Slideshow
Zoom
Rotate
List
INFO
Exit
: x1
: 0º
Start Slideshow
Zoom
Rotate
List
INFO Exit
: x1
: 0º x1 x2 x4
Start Slideshow
Zoom
Rotate
List
INFO Exit
: x1
: 0º
0º
90º
180º
270º
English -
BN68-02143A_Eng.indb 39 2009-03-10 오후 5:36:46
Using the MP List
This menu shows MP files from among the files saved on a USB memory device.
1.
Complete Steps 1 to 2 of
Using the Media Play Menu
. (Refer to page 37)
.
Press the ◄ or ► button to move to
Music
, then press the
ENTER
E
button.
The saved file information is displayed as a folder or file.
Memorycard
315.0MB/495.0MB Free
.
Press the ▲ or ▼ button to move to an icon, then press the
ENTER
E
button.
N
N
N
Pressing the
ENTER
E
button over a musical note icon immediately plays the music file.
Pressing the
ENTER
E
button over a folder icon shows the music files included in the folder.
To select a file on the next page, press the or button to move to the next or previous page.
4.
To select all files or a file, press the
INFO
button to display the Music menus.
Press the
ENTER
E
button to select
Play, Repeat Music, Delete, Delete All
or
Deselect All.
To exit
Media Play
mode, press the
MEDIA.P
button on the remote control.
❑
Music
5.9MB
Jan 14, 2009
1/20
Photo
Play ►
Repeat Music : Off
Delete
Delete All
Deselect All
Music Setup
L
Move
E
Enter
R
Return
▶▶
001 Swan Song feat.TB...
Upper Folder
Folder 1
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
All
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
006 Nat King Cole-Fly me to the moon.mp3
007 Ryuichi Sakamoto-Rain.mp3
008 Bon jovi-This ain’t a love song.mp3
1/3 Page ▶▶
00:00:00
00:04:01
00:04:28
00:04:12
00:05:39
00:04:30
00:05:25
00:04:30
00:03:54
Select
U
Move
INFO
Option
E
Enter
R
Return
Using the Option Menu
Play
Select to play MP3 files.
N
N
N
N
N
N
Press the button while playing an MP3 file to pause the file.
Press the button to exit Play mode.
This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if they are saved on the same USB device.
: Folder icon
: Music list icon
: Move to the previous folder stage icon
The selected file is displayed on the top with its playing time.
To adjust the music volume, press the
VOL
or
VOL
button on the remote control. To mute the sound, press the
M
MUTE
button on the remote control.
Press or buttons to change pages.
Repeat Music
Select to repeatedly play MP3 files in the current folder.
You can select
On
or
Off
Icon
Music function information icon
Function
When all music files in the folder (or the selected file) are repeated.
Repeat Music
is
On
.
When all music files in the folder (or the selected file) are played once.
Repeat Music
is
Off
.
When pressing the
PLAY/PAUSE
button on the remote control while music is playing.
When pressing the
STOP
button on the remote control, the music stops.
BN68-02143A_Eng.indb 40
English - 40
2009-03-10 오후 5:36:52
Music
5.9MB
Jan 14, 2009
1/20
▶▶
Play ►
Repeat Music : Off
Delete
Delete All
Deselect All
001 Swan Song feat.TB...
Upper Folder
Folder 1
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
All
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
006 Nat King Cole-Fly me to the moon.mp3
007 Ryuichi Sakamoto-Rain.mp3
008 Bon jovi-This ain’t a love song.mp3
1/3 Page ▶▶
00:00:00
00:04:01
00:04:28
00:04:12
00:05:39
00:04:30
00:05:25
00:04:30
00:03:54
Select
U
Move
INFO
Option
E
Enter
R
Return
Using the Setup Menu
Setup display settings you can make in the Media Play menu.
1.
Complete Steps 1 to 2 of
Using the Media Play Menu
. (Refer to page 37)
.
Press the ◄ or ► button to move to
Setup
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select an item you want, then press the
ENTER
E button.
(
Slide Show Speed
,
Background Music
,
Background Music Setting
,
Repeat
Music
,
Screen Saver, Safe Remove
)
4.
Press the ▲ or ▼ button to select the option, then press the
ENTER
E
button.
N
To exit
Media Play
mode, press the
MEDIA.P
button on the remote control.
Slide Show Speed
Select to control the slide show speed.
You can select
Fast
,
Normal,
or
Slow
.
Background Music
Select to determine whether to play an MP3 file during a slide show.
You can select Music
On
or Music
Off
.
Background Music Setting
While a slide show is in progress, use the
Background Music Setting
to select a music file to listen to.
Select a MP3 file as the background music.
Repeat Music
Select to determine whether to repeat playing the music when all MP3 files in the current folder have been played.
You can select On or Off
Screen Saver
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 10min., 20min., or 1hour.
Safe Remove
The message USB device can now be safely removed from TV. is displayed.
You can remove the device safely from the TV.
Setup
Setup
Photo
Memorycard
315.0MB/495.0MB Free
Music Setup
L
Move
E
Enter
R
Return
Slide Show Speed
Background Music
Background Music Setting
Normal
Slow
Repeat Music
Screen Saver
Safe Remove
: Off
: 10 min.
U
Move
E
Enter
R
Return
Upper Folder
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
◄◄ 1/2 Page ►►
Select
U
Move
E
Enter
R
Return
Slide Show Speed
Background Music
: Slow
: On
Background Music Setting
Repeat Music
Screen Saver
Safe Remove
: Off
: 10 min.
U
Move
E
Enter
R
Return
Setup
Slide Show Speed
Repeat Music
Screen Saver
: Slow
Background Music
Background Music Setting
: On
: Off
Safe Remove 20 min.
1 hour
Setup
U
Move
E
Enter
R
Return
Slide Show Speed
Background Music
: Normal
: On
Background Music Setting
Repeat Music : Off
Screen Saver
Safe Remove
: 10 min.
U
Move
E
Enter
R
Return
English - 41
BN68-02143A_Eng.indb 41 2009-03-10 오후 5:36:59
Anynet+
Connecting Anynet+ Devices
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote.
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
1.
Connect the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
TV
Anynet+ Device 1 Anynet+ Device Anynet+ Device
HDMI 1. Cable
HDMI 1. Cable
HDMI 1. Cable
To connect to a Home Theater
1.
Connect the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
.
Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
TV
Home Theatre
Anynet+ Device 1
Optical Cable
HDMI 1. Cable
Anynet+ Device Anynet+ Device
HDMI 1. Cable
HDMI 1. Cable
HDMI 1. Cable
N
N
N
N
N
N
Connect an Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the
Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home
Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO
OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV.
Connect only one Home Theater.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Continued...
English - 4
BN68-02143A_Eng.indb 42 2009-03-10 오후 5:37:01
❑
Setting Up Anynet+
The following settings help set the Anynet+ functions.
T
Press the
TOOLS
button to display
Tools
menu.
You can also set the Anynet+ by selecting
Tools
→
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Media Play (USB)
►
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1.
Press the
MENU
button. Press the ▲ or ▼ button to select
Application
, then press the
ENTER
E button.
.
Press the ▲ or ▼ button to select
Anynet+ (HDMI-CEC)
, then press the
ENTER
E button.
.
Press the ▲ or ▼ to select
Setup
, then press the
ENTER
E
button.
4.
Press the
ENTER
E
button to select
Anynet+ (HDMI-CEC)
.
5.
Press the ▲ or ▼ button to select
On
, then press the
ENTER
E
button.
N
The
Anynet+ (HDMI-CEC)
function is enabled.
N
N
If you select
Off
,
Anynet+ (HDMI-CEC)
is disabled.
When the
Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+ related operations are deactivated.
Device List
Setup
Move
Setup
Enter Return
Anynet+ (HDMI - CEC) : On
►
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
1.
Press the ▲ or ▼ button to select
Auto Turn Off
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select
Yes
, then press the
ENTER
E
button.
N
N
The
Auto Turn Off
function is enabled.
If you select
No
, the
Auto Turn Off
function is canceled.
Auto Turn Off
Move
: Yes
Enter Return
.
Press the
EXIT
button to exit.
N
N
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set
Auto Turn Off
to
Yes
, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
❑
Scanning and Switching between Anynet+ Devices
1.
Press the
TOOLS
button.
Press the ▲ or ▼ button to select
Device List
, then press the
ENTER
E
button.
N
N
Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
View TV
Device List
Recording : DVDR
.
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
E button. It is switched to the selected device.
N
Only when you set
Anynet+ (HDMI-CEC)
to
On
in the
Application
menu, the
Device List
menu appears.
N
N
N
N
N
DVDR MENU
DVDR INFO
Receiver
Setup
: On
Move Enter Return
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the
POWER
button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the
TOOLS
button.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the device, when the menu of the corresponding device is displayed on the screen.
Available Buttons
Numeric buttons ▲/▼/◄/►
ENTER
E
buttons
Color buttons /
EXIT
button
After switching to the device, while playing a file
(Backward search) / (Forward search)
(Stop) / (Play) / (Pause)
Device with built-in Tuner
After switching to the device, when you are watching a TV program
CH / CH
button
Audio Device
When Receiver is activated
VOL / VOL /
M
MUTE
button
Continued...
English - 4
BN68-02143A_Eng.indb 43 2009-03-10 오후 5:37:01
N
N
N
N
N
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The , operations may differ depending on the device.
Anynet+ Menu
The
Anynet+
menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Recording
Menu
INFO
Timer Recording
Stop Recording
Receiver
Setup
Switches from Anynet+ to TV broadcast mode.
Displays the Anynet+ device list.
Description
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.
Allows reserving a recording. (This menu works only for a device supporting recording reservations.)
Stops recording.
Sound is output through the receiver (home theater).
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using Anynet+.
❑
Recording
You can make a recording of a TV program using a Samsung recorder.
1.
Press the
TOOLS
button.
.
Press the ▲ or ▼ button to select
Recording
Immediately and press the
ENTER
E button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the
ENTER
E button. Recording begins.
When the recording device is not displayed
Select
Device List
and press the red button to search devices
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
:
:
Move
DVDR
On
Enter Return
.
Press the
EXIT
button to exit.
N
N
Pressing the button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.
❑
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1.
Press the
TOOLS
button. Press the ▲ or ▼ button to select
Receiver
.
.
Press the ◄ or ► button to select to
On
.
Now you can listen to sound through the receiver.
.
Press the
EXIT
button to exit.
N
If your receiver supports audio only, it may not appear in the device list.
N
N
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater
N
N
N receiver.
When using the
Media Play
feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
If there is a power interruption to the TV when the
Receiver
is set to
On
(by disconnecting the power cord or a power failure), the
Speaker Select
may be set to
External Speaker
when you turn the TV on again.
English - 44
BN68-02143A_Eng.indb 44 2009-03-10 오후 5:37:02
Troubleshooting for Anynet+
Symptom Solution
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether
Anynet+ (HDMI-CEC)
is set to
On
in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, Operating
Media play
,
Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+
(HDMI-CEC)
is set to
On
in the Anynet+ Setup menu.
Press the
TV
button on the TV remote control to switch to TV. Then press the
TOOLS
button to show the Anynet+ menu and select a menu you want.
Select View TV in the Anynet+ menu.
Press the
SOURCE
button on the TV remote control and select a device other than
Anynet+ devices.
Press
CH, CH LIST, PRE-CH
, and
FAV.CH
to change the TV mode.
(Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.)
The message Connecting to
Anynet+ device... appears on the screen.
•
•
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
You cannot use the play function when Plug & Play is in progress.
The connected device is not displayed.
•
•
•
•
•
•
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether
Anynet+ (HDMI-CEC)
is set to
On
in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
The TV program cannot be recorded.
The TV sound is not output through the receiver.
Connect the optical cable between TV and the receiver.
BN68-02143A_Eng.indb 45
English - 45
2009-03-10 오후 5:37:02
Appendix
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call Samsung customer service at 1-00-SAMSUNG.
Problem Possible Solution
Poor picture quality.
Poor sound quality.
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
No picture or sound.
No sound or sound is too low at maximum volume.
Picture rolls vertically.
The TV operates erratically.
The TV won’t turn on.
Remote control malfunctions
Try another channel.
Press the
SOURCE
button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the
M
MUTE
button is off.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check all connections.
Unplug the TV for 30 seconds, then try operating it again.
Make sure the wall outlet is working.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Press the
TV
button to put your remote control in the TV mode.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries are inserted correctly.
Digital broadcasting screen problem.
Please check the digital signal strength and antenna input.
The image is too light or too dark.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
The image is too large or too small.
Adjust the Size settings.
The visual qualities of digital channels vary.
The visual qualities of digital channels may vary depending on the original production method
(analog or digital).
- If the original production method is digital: High visual quality.
- If the original production method is analog: The digital program displayed on the screen is originally an analog program which has been converted to digital.
The visual quality is of an SD(Standard Definition) grade.
Screen is black and power indicator light blinks steadily.
Although the TV caption shows
HD, the visual quality is not satisfactory.
A distorted picture appears in the corner of the screen.
A strange sound is heard.
Pixels are visible on the screen.
On your computer; check the Power and Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power and Signal Cable.
The TV is using its power management system.
Press the
SOURCE
button on the panel or remote control.
Turn the TV off and on.
The HD(High Definition) caption that appears when switching channels or when pressing the
Information button on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect.
If
Screen Fit
is selected in some external devices, a distorted picture may appear in the corner of the screen. This symptom is caused by external devices, not the TV.
This is caused by minor systems operation and is not a defect.
The "Resets all settings to the default values" message appears.
There may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
This appears when you press and hold the reset to the factory defaults.
EXIT
button for a while. The product settings are
English - 4
BN68-02143A_Eng.indb 46 2009-03-10 오후 5:37:02
Preparation before installing the Wall-Mount
Case A.
Installing the SAMSUNG Wall-Mount
Case B.
Installing another company’s Wall-Mount
1.
Install the Wall Mount with a torque range of 15kgf·cm or less. Use care as the parts can be damaged if the torque is out of the specified range.
.
Accessory Kit contains Holder–Ring
N
Screw down the hole
[
②
] for installing another company’s Wall-Mount. (Case B)
[
①
] when installing wall-mount on the wall.
How to attach the Stand-Base
Using the screws for securing the stand base and the TV, firmly attach the TV to the stand base.
(The exterior of the set may be different from the picture.)
When mounting your TV on a wall, install the cover (
➊
) on the stand-base using two screws.
(PN50B540S3F) (PN58B540S3F)
Warning
Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.
N
Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright.
Using the Stand-Base
N
N
Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
English - 4
BN68-02143A_Eng.indb 47
-0° ~ 0°
2009-03-10 오후 5:37:05
경고
경고
주의
Securing the TV to the Wall
Caution
Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang
주의 precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
Accessaries
Holder-TV /
Screw
1
To prevent the TV from falling
1.
Attach the TV-Holder to the TV by fastening the screws
1
(M4*16) into the holes in the center of the TV.
N
N
42˝, 50˝ : Unscrew a screw attached on the back of your TV before attaching the TV-Holder.
Make sure to only use the supplied screw.
4", 50" 5", "
.
Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws fastened on the wall or cabinet so that the TV is fixed.
N
N
Purchase the screws to be used on the wall or cabinet separately.
Install the TV close to the wall so that it does not fall.
N
N
N
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
Confi rm that the cord or link does not come loose frequently.
Before moving the TV, separate the connected cord first.
4", 50"
Wall
5", "
Wall
.
Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.
English - 4
BN68-02143A_Eng.indb 48 2009-03-10 오후 5:37:07
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inch
19" ~22"
23"~29"
30"~40"
VESA Spec. (A * B)
100 * 100
200 * 100
200 * 200
Standard Screw
M4
M6
Quantity
LCD-TV 4
PDP-TV
46"~55"
57"~70"
80" ~
42"~ 50"
58"~ 63"
70" ~
400 * 400
800 * 400
1400 * 800
400 * 400
600 * 400
800 * 400
M8
M8 4
80" ~ 1400 * 800
N
N
N
N
N
N
N
N
The standard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.
Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
English - 4
BN68-02143A_Eng.indb 49 2009-03-10 오후 5:37:08
Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound (Output)
Dimension (W x H x D)
Body
With stand
PN50B540SF
50 inch (49.9 inches measured diagonally)
1920 x 1080 @ 60 Hz
10W x 2
48.4 x 30.3 x 2.8 inches
(1230.3 x 769.8 x 73 mm)
48.4 x 32.3 x 11.4 inches
(1230.3 x 821.5 x 290 mm)
Weight
Body
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
72.3 lbs (32.8 kg)
83.5 lbs (37.9 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
N
N
N
This device is a Class B digital apparatus.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
PN5B540SF
58 inch (58.0 inches measured diagonally)
1920 x 1080 @ 60 Hz
15W x 2
55.4 x 34.2 x 2.8 inches
(1407.7 x 870 x 73 mm)
55.4 x 36.4 x 13.1 inches
(1407.7 x 927 x 335 mm)
84.8 lbs (38.5 kg)
100 lbs (45.5 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
BN68-02143A_Eng.indb 50
English - 50
2009-03-10 오후 5:37:08
Dimensions (PN50B540SF)
TOP VIEW
JACK PANEL DETAIL . x . inches
FRONT VIEW
BN68-02143A_Eng.indb 51
SIDE VIEW
English - 51
REAR VIEW
NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc.
2009-03-10 오후 5:37:09
Dimensions (PN5B540SF)
TOP VIEW
JACK PANEL DETAIL . x . inches
FRONT VIEW
BN68-02143A_Eng.indb 52
SIDE VIEW
English - 5
REAR VIEW
NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc.
2009-03-10 오후 5:37:10
Información importante sobre la garantía relativa al formato de visualización del televisor
Las pantallas PDP con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. En estas pantallas debe ver las imágenes en el formato 16:9 de pantalla panorámicao ampliadas para llenar la pantalla si el modelo tiene esta opción, y en movimiento constante. La visualización de imágenesy gráficos estáticos en la pantalla, como las barras oscuras laterales en programación y vídeos de televisión en formato estándar no ampliados, debe limitarse a no más del 5% del tiempo total de visualización del televisor por semana.
Además, la visualización de otras imágenes estáticas y texto, como los informes de bolsa, pantallas de videojuegos, logotipos de emisoras, sitios Web o gráficos y dibujos de ordenador, deberá limitarse en todos los televisores como ya se ha descrito.
La visualización de imágenes estáticas que supere los límites de las instrucciones anteriores puede producir un envejecimiento desigual de las pantallas PDP, lo que provocará una reproducción superpuesta sutil pero permanente de la imagen. Para evitarlo, varíe la programación y las imágenes y, sobre todo, visualice imágenes en movimiento a toda pantalla, no gráficos estáticos ni barras oscuras.
En modelos de PDP que ofrezcan opciones para el tamaño de la imagen, utilice estos controles para ver los distintos formatos como imagen a toda pantalla. Tenga cuidado en la selección y duración de los formatos de televisión utilizados para la visualización. La garantía limitada de Samsung no cubre el envejecimiento desigual de la PDP como resultado de la selección y uso de formatos, así como otras imágenes retenidas.
© 2009 Samsung Electronics Co., Ltd. Reservados todos los derechos.
Español -
BN68-02143A-00SPA.indb 2 3/5/2009 3:45:51 PM
Instrucciones para el usuario
Retención de imágenes en la pantalla
No deje imágenes fijas visibles (como las de un videojuego) en el panel de la pantalla de plasma durante mucho tiempo, ya que se podría producir la retención de la imagen en la misma. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar dicha retención de la imagen, consulte la página 24 de este manual para reducir el grado de brillo y contraste de la pantalla al mostrar una imagen fija.
Altitud
La PDP sólo puede funcionar normalmente hasta altitudes de 2.000 metros.
Calor en la parte superior del TV de plasma
La parte superior del aparato puede calentarse tras un uso prolongado ya que el calor se disipa desde el panel a través de los orificios de ventilación de la parte superior.
Esto es normal y no indica ningún defecto ni fallo de funcionamiento del aparato.
No obstante, debe evitarse que los niños toquen la parte superior del aparato.
El aparato emite una especie de crujido.
El ruido similar a un crujido puede producirse cuando el aparato se contrae o se expande debido a un cambio ambiental de temperatura o humedad. Este hecho es normal y no se trata de ningún defecto en la unidad.
Defecto de celda
La PDP utiliza un panel compuesto de 2,360,000 (nivel HD) a 6,221,000(nivel FHD) a píxeles que requieren una sofisticada tecnología para su producción. No obstante, puede que existan unos cuantos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del aparato.
Evite que el TV funcione a temperaturas por debajo de 41 °F (5 °C)
La imagen fija visualizada durante demasiado tiempo puede causar daños permanentes en el panel de la PDP.
Ver el TV de plasma en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en la izquierda, derecha o centro de la pantalla causados por la diferencia de emisión de luz en la pantalla.
La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla.
Los daños provocados por los efectos mencionados no quedan cubiertos por la garantía.
Imágenes fantasma en la pantalla.
Ver imágenes fijas de videojuegos y PC durante un periodo prolongado puede producir restos de imágenes parciales.
Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ al mostrar imágenes fijas durante un tiempo prolongado.
Garantía
La garantía no cubre ningún daño causado por la retención de imágenes.
La garantía no cubre el desgaste de la pantalla.
BN68-02143A-00SPA.indb 3
Español -
3/5/2009 3:45:51 PM
Índice
■
■
■
■
■
■
Conexión y preparación del televisor
Listado de características ..........................................................5
Comprobación de los componentes ..........................................5
Montaje de los cables ................................................................5
Aspecto general del panel de control ........................................6
Aspecto general del panel de conexiones .................................7
Mando a distancia .....................................................................8
■
■
■
■
■
Conexiones
■
■
■
■
■
Conexión de las antenas de VHF y UHF ..................................9
Conexión de la televisión por cable ...........................................9
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de HDMI ............... 11
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de DVI ................... 11
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de los cables de componentes ......................................................................12
Conexión a una videocámara .................................................12
Conexión de un aparato de vídeo ...........................................13
Conexión de un sistema de audio digital .................................14
Conexión de un amplificador/DVD para Home Cinema .........14
Conexión a un PC ...................................................................15
■
■
■
■
■
■
■
Funcionamiento
Encendido y apagado del televisor .........................................16
Cambio de canales .................................................................16
Ajuste del volumen ..................................................................16
Uso del botón TOOLS .............................................................17
Visualización de la pantalla ....................................................17
Visualización de los menús .....................................................18
Función Plug & Play ................................................................19
■
■
Control de los canales
Almacenamiento de canales ..................................................20
Gestión de los canales ...........................................................20
Control de la imagen
■ Cambio del tamaño de la imagen ............................................22
■
■
■
Pantalla de PC
Uso del televisor como una pantalla de ordenador (PC) .........26
Modos de pantalla ...................................................................26
Ajuste del televisor con el ordenador ......................................27
Control del sonido
■ Cambio de la configuración del sonido ...................................28
■
■
■
■
Descripción de las funciones
Configuración del menú de configuración ...............................29
Configuración de la hora .........................................................33
Lista de Entradas/Editar Nombre ............................................34
Soporte técnico .......................................................................34
■
■
■
■
Media Play
Uso de la función para la Media Play ......................................36
Uso de la lista de FOTOS (JPEG) ...........................................37
Uso de la lista MP3 .................................................................40
Uso del menú de configuración ...............................................41
■
■
Anynet+
Conexión de dispositivos Anynet+...........................................42
Solución de problemas de Anynet+ .........................................45
■
■
■
■
■
■
■
■
■
Apéndice
Resolución de problemas ........................................................46
Preparación antes de instalar el montaje mural ......................47
Cómo montar el soporte base .................................................47
Uso del soporte .......................................................................47
Fijación del televisor a la pared ...............................................48
Especificaciones del equipo de montaje en la pared (VESA) ...49
Especificaciones ......................................................................50
Dimensiones (PN50B540S3F) ................................................51
Dimensiones (PN58 B540S3F) ...............................................52
Símbolos
Pulse
N
Remarque
O
Botón de una pulsación
T
Herramientas
Español - 4
3/5/2009 3:45:52 PM BN68-02143A-00SPA.indb 4
Conexión y preparación del televisor
Listado de características
•
•
•
•
•
•
•
•
Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor.
Temporizador automático para encender o apagar el televisor.
Temporizador de desconexión especial.
Función V-chip.
Excelente interfaz digital y capacidad de trabajo en red:
El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador).
Se pueden escuchar archivos de música y ver imágenes de los dispositivos de clase de almacenamiento masivo USB (MSC).
Conexión HDMI/DVI del PC con este televisor.
SRS TruSurround HD proporciona un sistema surround virtual.
Comprobación de los componentes
Compruebe que los artículos siguientes vengan incluidos con su televisor. Si falta alguno, póngase en contacto con su distribuidor.
N
El color y la forma de los componentes pueden variar según el modelo.
Mando a distancia
(BN59-00855A)/
Pilas AAA
(4301-000103)
Cable de alimentación
(3903-000144)
Manual del usuario/
Guía de configuración rápida
Tarjeta de garantía/
Manual de seguridad
(No disponible en todos los lugares)
Paño de limpieza
(BN63-01798B)
Soporte de cables
Núcleo de ferrita para cable de alimentación
(3301-001305)
Núcleo de ferrita para cable de AV lateral
(3301-001201)
Sólo PN58B540S3F
Cubierta inferior/
Tornillos (2)
(Consulte la página 47)
Sólo PN58B540S3F
Cubierta inferior
Sólo PN50B540S3F
Soportes anilla (4)
(Consulte la página 47 )
Soporte TV / Tornillos
(BN96-10788A)
(Consulte la página 48)
➢
Núcleo de ferrita
Los núcleos de ferrita se utilizan para proteger los cables de las interferencias.
Cuando conecte un cable, abra el núcleo de ferrita y sujételo con un cable cerca del enchufe.
Tornillos (4)
PN50B540S3F
Montaje de los cables
Sujete los cables con el soporte de cables para que éstos no sean visibles a través del soporte transparente.
Cable de alimentación
Cable de audio/cable de vídeo
(Sólo PN58B540S3F)
Español - 5
BN68-02143A-00SPA.indb 5 3/5/2009 3:45:55 PM
Aspecto general del panel de control
Los botones de la parte inferior derecha del panel controlan las funciones básicas del televisor, incluidos los menús en pantalla.
Para utilizar las funciones más avanzadas debe usarse el mando a distancia.
N
N
El color y la forma del producto pueden variar según el modelo.
Si toca el botón del panel frontal, se activan los botones.
1
SOURCE
E
Cambia entre todas las fuentes de entrada disponibles
(TV, AV1, AV2, Componente1, Componente2, PC, HDMI1, HDMI2/DVI, HDMI3).
En el menú de la pantalla, utilice este botón del mismo modo que el botón
ENTER
E
del mando a distancia.
2
MENU
Púlselo para ver en pantalla un menú de las características del televisor.
3
+ VOL –
Púlselos para subir o bajar el volumen. En el menú de la pantalla, use los botones
+ VOL –
del mismo modo que los botones
◄ y ► del mando a distancia.
4 <
CH
>
Permiten cambiar de canal. En el menú de la pantalla, use los botones
<
CH
>
del mismo modo que los botones ▲ y ▼ del mando a distancia.
5
INDICADOR DE ENCENDIDO
Parpadea y se apaga cuando se enciende el aparato y se ilumina en el modo en espera.
6 P
(ENCENDIDO)
Se pulsa para encender o apagar el televisor.
7
SENSOR DEL MANDO A DISTANCIA
El mando a distancia debe dirigirse hacia este punto del televisor.
8
ALTAVOCES
Español -
BN68-02143A-00SPA.indb 6 3/5/2009 3:45:56 PM
Aspecto general del panel de conexiones
Use los terminales del panel de conexión para conectar componentes de A/V que estarán disponibles permanentemente, como un reproductor de Blu-ray/DVD o un aparato de vídeo.
N
El color y la forma del producto pueden variar según el modelo.
Panel posterior del TV Panel lateral del TV
1
POWER IN
Permite conectar el cable de alimentación suministrado.
2
AUDIO OUT
Conexión para un componente de audio digital.
3
PC IN [PC] / [AUDIO]
Conexión para los terminales de salida de audio y vídeo del
PC.
4
DVI AUDIO IN (AUDIO-R/L)
Conexión para el terminal de salida de audio DVI de un dispositivo externo.
5
HDMI IN 1, (DVI),
Conexión para el terminal HDMI de un dispositivo que tenga salida HDMI. (HDMI 2 es compatible con HDMI-DVI IN y con la conexión de un ordenador.)
-
-
HDMI 2 se puede utilizar también como una conexión
DVI con entradas de señales de audio analógicas independientes. Para realizar esta conexión se requiere un cable opcional HDMI/DVI.
Cuando se usa un adaptador HDMI/DVI, las entradas de señales de audio analógicas DVI del televisor permiten recibir señales de audio por las entradas derecha e izquierda desde un dispositivo DVI.
6
ANT IN
Usa un conector coaxial de 75 Ω para antena o red por cable.
7
DIGITAL AUDIO OUT (OPTICAL)
Se conecta al componente de audio digital.
8
COMPONENT IN 1, / AV IN 1
Permite conectar el vídeo/audio de componentes. El terminal
COMPONENT IN 1 también se usa como terminal AV IN 1.
N
Conecte el cable de vídeo al terminal COMPONENT
IN 1 [Y/VIDEO] y el cable de audio a los terminales
COMPONENT IN 1 [R-AUDIO-L].
9
EX-LINK
Sólo para servicio.
0
USB
Conexión para un dispositivo de almacenamiento masivo
USB para ver archivos de fotos y reproducir archivos de audio.
!
AV IN
Entradas de audio y vídeo para dispositivos externos.
Español -
BN68-02143A-00SPA.indb 7 3/5/2009 3:45:57 PM
Mando a distancia
Puede utilizar el mando a una distancia del televisor de hasta metros.
N
N
El color y la forma del producto pueden variar según el modelo.
El exceso de luz puede influir en el rendimiento del mando a distancia.
1
2
POWER
Enciende y apaga el televisor.
BOTONES NUMÉRICOS
Permiten cambiar de canal.
$
Utilice estos botones en los modos DMA,
Media Play y Anynet+.
( : Este mando a distancia se puede usar para controlar la grabación de las grabadoras de Samsung con la función
Anynet+).
3
4
5
Permite seleccionar canales adicionales
(digitales y analógicos) emitidos por la misma emisora. Por ejemplo, para seleccionar el canal
“54-3”, pulse “54” y después pulse “ ” y “3”.
M
MUTE
Interrumpe temporalmente el sonido.
VOL
Permiten subir o bajar el volumen.
%
TV
Selecciona directamente el modo TV.
^
PRE-CH
Sintoniza el canal anterior.
&
*
CH
Permiten cambiar de canal.
MENU
Muestra el menú en la pantalla.
6
SOURCE
Permite ver y seleccionar las fuentes de vídeo disponibles.
(
FAV.CH
Permite sintonizar los canales favoritos.
7
CH LIST
Muestra las listas de canales en la pantalla.
)
RETURN
Vuelve al menú anterior.
8
TOOLS
Permite seleccionar rápidamente las funciones que se usan con mayor frecuencia.
9
ARRIBA▲/ABAJO▼/IZQUIERDA◄/
DERECHA►/ENTER
Permiten seleccionar los elementos del menú en pantalla y cambiar los valores del menú.
a b
P .SIZE
Selección del tamaño de la imagen.
c
EXIT
Se pulsa para salir del menú.
SRS
Selecciona el modo Trusurround SRS HD.
d
CC
Controla el decodificador de subtítulos.
0
INFO
Muestra información en la pantalla del televisor.
!
BOTONES DE COLORES
Use estos botones en la lista de canales y la función Media Play. e
MTS
Permite elegir estéreo, monoaural o un programa de audio independiente (emisión
SAP).
@
MEDIA.P
(Media play)
Esta función permite ver y reproducir archivos de fotos y de música desde un dispositivo externo. (Consulte las páginas 37
(fotos) y 40 (música))
#
P.MODE
Permite seleccionar el modo de la imagen.
❑
Instalación de las pilas en el mando a distancia
1
Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración.
Instale dos pilas de tamaño AAA.
N
Asegúrese de respetar los extremos “+” y “–” de las pilas indicados en el diagrama del interior del compartimento.
.
Cierre la tapa, como se muestra en la ilustración.
N
Saque las pilas y guárdelas en un lugar fresco y seco si no va a utilizar el mando a distancia durante un período de tiempo prolongado. (Suponiendo un uso normal del televisor, las pilas deberían durar aproximadamente un año.)
N
Si el mando a distancia no funciona, haga estas comprobaciones
1. ¿Está encendido el televisor?
2. ¿Están intercambiados los polos positivos y negativos de las pilas?
3. ¿Se han agotado las pilas?
4. ¿Ha habido un corte de energía o se ha desenchufado el cable?
5. ¿Hay en las proximidades un fluorescente o un neón?
Español -
BN68-02143A-00SPA.indb 8 3/5/2009 3:45:58 PM
Conexiones
Conexión de las antenas de VHF y UHF
Si su antena tiene un juego de cables con este aspecto, consulte “Antenas con cables planosdoblesde300Ω ” a continuación.
Si la antena tiene un cable con este aspecto, consulte “ Antenasconcablescoaxialesde75Ω” .
Si tiene dos antenas, consulte “Antenas de VHF y UHF separadas”.
❑
Antenasconcablesplanosdoblesde300Ω
Si utiliza una antena externa (de azotea o de “cuernos”) de cables planos dobles de
300Ω,sigalasindicacionessiguientes.
1.
Coloque los hilos del cable doble bajo los tornillos de un adaptador de 300 a 75 Ω
(no suministrado).
Utilice un destornillador para apretar los tornillos.
.
Enchufe el adaptador en el terminal ANT IN de la parte posterior del televisor.
❑
Antenasconcablescoaxialesde75Ω
Enchufe el cable de la antena en el terminal ANT IN de la parte posterior del televisor.
❑
Antenas de VHF y UHF separadas
Si dispone de dos antenas separadas para el televisor (una de VHF y otra de UHF), deberá combinar las señales de ambas antenas antes de conectarlas al televisor. Este procedimiento requiere un combinador-adaptador opcional (disponible en la mayoría de tiendas de electrónica).
1.
Conecte los dos cables de antena al combinador.
.
Enchufe el combinador en el terminal ANT IN de la parte inferior del panel posterior.
ANT IN
UHF
VHF
ANT IN
UHF
VHF
ANT IN
Conexión de la televisión por cable
Para conectar a un sistema de TV por cable, siga estas instrucciones.
❑
Cable sin decodificador de cable
Enchufe el cable de entrada en el terminal ANT IN de la parte posterior del televisor.
N
Dado que el televisor tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados.
ANT IN
❑
Conexión al decodificador de cable que decodifica todos los canales
1.
Busque el cable conectado al terminal ANT OUT de su decodificador de cable.
N
Este terminal puede estar etiquetado como “ANT OUT”, “VHF OUT” o sencillamente
“OUT”.
.
Enchufe el otro extremo del cable en el terminal ANT IN de la parte posterior del televisor.
ANT IN ANT OUT
ANT IN
BN68-02143A-00SPA.indb 9
Español -
Continúa…
3/5/2009 3:46:00 PM
❑
Conexión al decodificador de cable que decodifica algunos canales
Si su decodificador de cable decodifica únicamente algunos canales (como, por ejemplo, canales de suscripción), siga las instrucciones que se incluyen a continuación. Necesitará un separador de señales de dos vías, un conmutador RF (A/B) y cuatro extensiones de cable de antena. (Estos artículos están disponibles en la mayoría de las tiendas de electrónica.)
1.
Busque y desconecte el cable conectado al terminal ANT IN de su decodificador de cable.
N
Este terminal puede estar etiquetado como
“ANT IN”, “VHF IN” o sencillamente “IN”.
ANT IN
.
Conecte este cable al separador de señales de dos vías.
.
Conecte un cable de antena entre el terminal
OUTPUT del separador y el terminal IN del decodificador de cable.
4.
Conecte un cable de antena entre el terminal
ANT OUT del decodificador de cable y el terminal B–IN del conmutador RF(A/B).
5.
Conecte otro cable entre el otro terminal
OUT del separador y el terminal A–IN del conmutador RF (A/B).
.
Conecte el último cable de antena entre el terminal OUT del conmutador RF (A/B) y el terminal ANT IN de la parte posterior del televisor.
Cable de entrada
Cable de entrada
Cable de entrada
Cable de entrada
Separador
Separador
Separador
Cable de entrada
Separador
IN CABLE OUT
Separador
IN CABLE OUT
A
B
IN CABLE OUT
Decodificador de cable
Decodificador de cable
IN CABLE OUT
Decodificador de cable
RF (A/B)
Conmutador
A
B
RF (A/B)
Conmutador
A
B
RF (A/B)
Conmutador
Parte posterior del televisor
ANT IN
Una vez realizada esta conexión, ajuste el conmutador A/B a la posición “A” para la visualización normal. Ajuste el conmutador A/B en la posición “B” para ver los canales codificados. (Cuando ajuste el conmutador A/B en la posición “B”, necesitará sintonizar el
TV con el canal de salida del receptor de cable, que normalmente es el canal 3 o 4).
BN68-02143A-00SPA.indb 10
Español - 10
3/5/2009 3:46:02 PM
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite
(decodificador) a través de HDMI
Esta conexión sólo se puede realizar si hay un terminal de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad.
1.
Conecte un cable HDMI entre el terminal HDMI IN (1, 2(DVI), o 3) del televisor y el terminal HDMI del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador).
Panel posterior del TV Panel lateral del TV
Reproductor de DVD/Blu-ray o receptor por cable/satélite
1 Cable HDMI (No suministrado)
o
N
N
N
N
¿Qué es HDMI?
• HDMI, o interfaz multimedia de alta definición, es una interfaz que permite la transmisión de señales digitales de audio y de
• vídeo mediante un solo cable.
La diferencia entre los dispositivos HDMI y DVI es que el HDMI es más pequeño y tiene instalada la función de codificación
HDCP (protección alta de la copia digital del ancho de banda).
Cada reproductor DVD o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior.
Puede que el televisor no proporcione salida de sonido y muestre imágenes con colores anómalos si se han conectado reproductores DVD/Blu-ray o receptores por cable/satélite que admiten versiones de HDMI anteriores a la versión 1.3. Si se conecta un cable antiguo HDMI y no hay sonido, conecte el cable HDMI al terminal HDMI IN 2(DVI) y los cables de audio a los terminales DVI AUDIO IN [R-AUDIO-L] de la parte posterior del televisor. Si ocurriera esto, póngase en contacto con la empresa que suministró el reproductor de DVD/Blu-ray o receptor por cable/satélite para confirmar la versión HDMI y solicite una actualización.
Los cables HDMI que no son 1.3 pueden causar un molesto parpadeo o que no se muestre la pantalla.
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite
(decodificador) a través de DVI
Esta conexión sólo se puede realizar si hay un terminal de salida de DVI en el dispositivo externo.
1.
Conecte un cable HDMI/DVI o un adaptador de DVI-HDMI entre el terminal HDMI IN 2(DVI) del televisor y el terminal DVI del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador).
.
Conecte los cables de audio entre el terminal DVI AUDIO IN [R-AUDIO-L] del televisor y del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador).
Reproductor de DVD/Blu-ray o receptor por cable/satélite
Panel posterior del TV
Cablede audio (no suministrado)
1 Cable HDMI/DVI (no suministrado)
N
N
N
Cada reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior.
Cuando conecte un reproductor de DVD o receptor de televisión por cable/satélite (decodificador), debe hacer coincidir los colores del terminal de conexión y del cable.
Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI).
Español - 11
BN68-02143A-00SPA.indb 11 3/5/2009 3:46:05 PM
Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite
(decodificador) a través de los cables de componentes
Los terminales del panel posterior del televisor facilitan la conexión de un reproductor de DVD/Blu-ray o receptor por cable/ satélite (decodificador) al TV.
1.
Conecte los cables de los componentes entre los terminales COMPONENT IN (1 o 2) [Y, P
B
, P
R
] del televisor y los terminales
COMPONENT [Y, P
B
, P
R
] del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador).
.
Conecte los cables de audio entre los terminales COMPONENT IN (1 o 2) [R-AUDIO-L] del televisor y los terminales AUDIO OUT del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador).
Panel posterior del TV
Reproductor de DVD/Blu-ray o receptor por cable/satélite
Cablede audio (no suministrado)
1
Cable de componentes (no suministrado)
N
N
N
El vídeo de componentes divide las señales de vídeo en Y (Luminancia (brillo)), P
B
(azul) y P
R
(rojo) para mejorar la calidad del vídeo. Las conexiones de audio y de vídeo de componentes deben coincidir. Por ejemplo, si se conecta el cable de vídeo a
COMPONENT IN 1, conecte también el cable de audio a la misma entrada COMPONENT IN 1.
Cada reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior.
Cuando conecte un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador), debe hacer coincidir los colores del terminal de conexión y del cable.
Conexión a una videocámara
Los conectores del panel lateral y posterior del TV facilitan la conexión a una videocámara.
❑
Mediante el cable de audio/vídeo
1.
Conecte un cable de vídeo entre el terminal AV IN 2 [VIDEO] del televisor y el terminal VIDEO OUT de la videocámara.
.
Conecte cables de audio entre los terminales AV IN 2 [L-AUDIO-R] del televisor y los terminales AUDIO OUT de la videocámara.
Panel lateral del TV
Videocámara 1 Cable de vídeo (no suministrado)
Cablede audio (no suministrado)
N
N
Cada videocámara tiene una configuración diferente del panel posterior.
Cuando conecte una videocámara, debe hacer coincidir los colores del terminal de conexión y del cable.
Español - 1
BN68-02143A-00SPA.indb 12 3/5/2009 3:46:08 PM
❑
Mediante el cable HDMI
1.
Conecte un cable HDMI entre el terminal HDMI IN (1, 2(DVI), o 3) del televisor y el terminal HDMI de la videocámara.
Panel posterior del TV
Panel lateral del TV
Videocámara
o
1 Cable HDMI (No suministrado)
N
Cada videocámara tiene una configuración diferente del panel posterior.
Conexión de un aparato de vídeo
❑
Conexión de vídeo
En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas 9 ~ 10). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable.
1.
Desenchufe el cable o la antena de la parte posterior del TV.
.
Enchufe el cable o la antena en el terminal ANT IN de la parte posterior del aparato de vídeo.
.
Conecte un cable de antena entre el terminal ANT OUT del aparato de vídeo y el terminal ANT IN del televisor.
4.
Conecte un cable de vídeo entre el terminal AV IN 1 [Y/VIDEO] o AV IN 2 [VIDEO] del televisor y el terminal VIDEO OUT del aparato de vídeo.
5.
Conecte cables de audio entre los terminales AV IN 1 (o AV IN 2) [R-AUDIO-L] del televisor y los terminales AUDIO OUT del aparato de vídeo
Panel posterior del TV
Panel lateral del TV
Panel posterior del vídeo
5 Cable de audio (no suministrado)
4 Cable de audio (no suministrado)
Cable de audio (no suministrado)
N
N
N
N
Si tiene un vídeo “mono” (sin estéreo), use un conector Y (no suministrado) para conectar los terminales de entrada de audio derecho e izquierdo del TV. También se puede conectar el cable al terminal “R”.
Si el vídeo es estéreo, tendrá que conectar dos cables.
Cada aparato de vídeo tiene una configuración diferente del panel posterior.
Cuando conecte un aparato de vídeo, debe hacer coincidir los colores del terminal de conexión y del cable.
Cuando se conecta a AV NI 1, el color (verde) del terminal AV IN 1 [Y/VIDEO] no coincide con el color (amarillo) del cable de vídeo.
Español - 1
BN68-02143A-00SPA.indb 13 3/5/2009 3:46:11 PM
Conexión de un sistema de audio digital
Los terminales del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/Receptor) al televisor.
1.
Conecte un cable óptico entre los terminales DIGITAL AUDIO OUT (OPTICAL) y los terminales de entrada de audio digital
(OPTICAL) del sistema de audio digital.
Cuando un sistema de audio digital se conecta al terminal DIGITAL AUDIO OUT (OPTICAL): Reduzca el volumen del TV y ajuste el volumen con el control del sistema.
Panel posterior del TV
Sistema de audio digital
Cable óptico (no suministrado)
N
N
N
El audio de 5.1 canales es posible cuando el televisor está conectado a un dispositivo externo que admita 5.1 canales.
Cada sistema de audio digital tiene una configuración diferente del panel posterior.
Cuando el receptor (sistema Home Cinema) está activado, se puede oír la salida de sonido desde el terminal óptico del televisor.
Cuando se ve la televisión a través de un DTV (aéreo), el televisor envía el sonido de 5.1 canales al receptor del sistema Home
Cinema. Cuando la fuente es un componente digital, como un DVD, y está conectada al televisor a través de HDMI, sólo se oye el sonido de 2 canales del receptor del sistema Home Cinema.
Si desea oír audio de 5.1 canales, conecte el terminal DIGITAL AUDIO OUT (OPTICAL) del reproductor de DVD/Blu-ray o del decodificador por cable/satélite directamente a un amplificador o un sistema de Home Cinema, no al televisor.
Conexión de un amplificador/DVD para Home Cinema
1.
Conecte los cables de audio entre los terminales AUDIO OUT [R-AUDIO-L] del televisor y los terminales AUDIO IN [L-AUDIO-R] del amplificador/DVD para Home Cinema.
Cuando conecte un amplificador de audio a los terminales AUDIO OUT [R-AUDIO-L]: Disminuya el volumen del TV y ajuste el nivel del volumen con el control del volumen del amplificador.
Panel posterior del TV
Amplificador/DVD del sistema
Home Cinema
Cablede audio (no suministrado)
N
N
Cada amplificador y sistema de DVD para Home Cinema tiene una configuración diferente del panel posterior.
Cuando conecte un amplificador o un sistema de DVD para Home Cinema, debe hacer coincidir los colores del terminal de conexión y del cable.
Español - 14
BN68-02143A-00SPA.indb 14 3/5/2009 3:46:15 PM
Conexión a un PC
❑
Uso del cable D-Sub
1.
Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador.
.
Conecte un cable de audio PC entre el terminal PC IN [AUDIO] del televisor y el terminal Audio Out de la tarjeta de sonido del ordenador.
Panel posterior del TV
PC
Cable de audiodel ordenador (no suministrado)
1 Cable D-Sub (no suministrado)
❑
Uso del cable HDMI/DVI
1.
Conecte un cable HDMI/DVI entre el terminal HDMI IN 2(DVI) del televisor y el terminal de salida PC del ordenador.
.
Conecte un cable estéreo miniclavija/2 RCA de 3,5 mm entre el terminal DVI AUDIO IN [L-AUDIO-R] del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador.
Panel posterior del TV
PC
Conector estéreo de ,5 mm para el cable RCA (no suministrado)
1 Cable HDMI/DVI (no suministrado)
N
N
N
Cada ordenador tiene una configuración diferente del panel posterior.
Cuando conecte un ordenador, debe hacer coincidir los colores del terminal de conexión y del cable.
Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI).
Español - 15
BN68-02143A-00SPA.indb 15 3/5/2009 3:46:18 PM
Funcionamiento
Encendido y apagado del televisor
Pulse el botón POWER del mando a distancia. También puede usar el botón POWER del televisor.
N
El televisor puede tardar unos segundos en encenderse.
Cambio de canales
❑
Utilización de los botones de canal
Pulse los botones
CH
o
CH
para cambiar de canal.
N
Cuando se pulsan los botones
CH
o
CH
, el televisor cambia los canales secuencialmente. Verá todos los canales que ha memorizado el TV. (Debe haber un mínimo de tres canales memorizados.) No verá los canales borrados o no memorizados. Consulte la página 20 para la memorización de los canales.
❑
Utilización de los botones numéricos
Utilice los botones numéricos para ir directamente a un canal. Por ejemplo, para seleccionar el canal “27”, pulse “2” y “7”.
N
Para cambiar rápidamente de canal, pulse los botones numéricos y después el botón
ENTER
E
.
❑
Uso del botón “ ”
El botón “ ” se utiliza para seleccionar emisoras que emitan con señal digital.
1.
Por ejemplo, para seleccionar el canal “7-1”, pulse “7”, “ ”, “1”.
N
N
HD indica que el televisor está recibiendo una señal digital de alta definición.
SD indica que el televisor está recibiendo una señal digital de definición estándar.
Para cambiar rápidamente de canal, pulse los botones numéricos y después el botón
ENTER
E
.
❑
Utilización del botón PRE-CH para seleccionar el canal anterior
1.
Pulse el botón
PRE-CH
. El televisor cambiará al último canal visualizado.
N
Para cambiar rápidamente de un canal a otro que no es correlativo, sintonice un canal y utilice el botón numérico para seleccionar el segundo canal. A continuación, utilice el botón
PRE-CH
para alternar rápidamente entre ambos.
Ajuste del volumen
❑
Utilización de los botones de volumen
1.
Pulse los botones
VOL
o
VOL
para subir o bajar el volumen.
❑
Uso del botón
M
MUTE
Puede interrumpir el sonido en cualquier momento pulsando el botón
M
MUTE
.
1.
Pulse el botón
M
MUTE
y se desconectará el sonido.
M
se mostrará en la pantalla.
.
Para recuperar el sonido, vuelva a pulsar el botón
M
MUTE
o pulse los botones
VOL
o
VOL
.
Español - 1
BN68-02143A-00SPA.indb 16 3/5/2009 3:46:19 PM
Uso del botón TOOLS
Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú
Herramientas cambia según el modo de entrada externo que se está viendo.
1.
Pulse el botón
TOOLS
. Aparece el menú
Herramientas
.
.
Pulse los botones ▲/▼ para seleccionar un menú y, a continuación, pulse el botón
ENTER
E
.
.
Pulse los botones ▲/▼/◄/►/
ENTER
E
para ver, cambiar o usar las opciones seleccionadas.
Para ver una descripción más detallada de cada función, consulte la página correspondiente.
Herramientas
Anynet+ (HDMI-CEC)
Sonido Modo : Favorito
Temporizador : Apagado
•
•
•
•
•
•
Anynet+(HDMI-CEC), página 43
Modo Sonido, página 28
Temporizador, página 33
Añadir a favoritos o Borrar de favoritos, página 21
Cambiar a Cable (o a Aire), página 20
Ajuste Automático, página 27
Agregar a Favoritos
Cambiar a Cable
U
Mover Ingresar e
Salir
Visualización de la pantalla
La pantalla identifica el canal actual y el estado de algunos ajustes de audio-vídeo.
1.
Pulse el botón
INFO
del mando a distancia. El televisor mostrará el canal, el tipo de sonido y el estado de ciertos ajustes de imagen y sonido.
TV #1
DTV Aire
1-1
Dolby Digital
Vie, Dic 19 2:05 am
M. Spillane’s Mike Hammer
Bonocrunch
Next Program
Prison Break
1080i 16:9 Español
1:55 am - 2:55 am
2:55 am - 3:55 am
O
Pulse el botón
INFO
otra vez o espere unos 10 segundos y desaparecerá automáticamente.
BN68-02143A-00SPA.indb 17
Español - 1
3/5/2009 3:46:20 PM
Visualización de los menús
Antes de utilizar el televisor, siga los pasos que se explican a continuación para aprender a desplazarse por el menú a fin de seleccionar y ajustar las diferentes funciones.
1.
Pulse el botón
MENU
.
El menú principal se muestra en la pantalla. En el lado izquierdo hay los siguientes iconos:
Imagen, Sonido, Canal,
Configuración, Entrada, Aplicaciones, Soporte técnico.
.
Pulse los botones ▲ o ▼ para seleccionar uno de los iconos.
Pulse los botones ◄ o ► para acceder al menú secundario de los iconos.
.
Pulse los botones ▲ o ▼ para desplazarse por las opciones del menú.
Pulse el botón
ENTER
E
para acceder a los elementos del menú.
4.
Pulse los botones ▲/▼/◄/► para cambiar los elementos seleccionados.
Pulse el botón
RETURN
para volver al menú anterior.
5.
Pulse el botón
EXIT
para salir del menú.
Uso de los botones del mando a distancia
Botón
MENU
RETURN
EXIT
Función
Mostrar el menú principal de la pantalla.
Volver al menú anterior.
Salir del menú en pantalla.
Botón
▲/▼/◄/►/
ENTER
E
Función
Mover el cursor y seleccionar una opción.
Seleccionar la opción marcada.
Confirmar la configuración.
❑
Ejemplo: Configuración del brillo del televisor en el menú de imagen
Ajuste del brillo a 0
1.
Pulse el botón
MENU
para ver el menú.
Modo
Luz de la celda
Contraste
Brillo
Definición
Color
Tinte (V/R)
: Normal
: 4
: 95
: 45
: 50
: 50
: V50/R50
.
Pulse el botón
ENTER
E
para seleccionar
Imagen
.
.
Pulse los botones ▲ o ▼ para seleccionar
Brillo
.
4.
Pulse el botón
ENTER
E
.
Modo
Luz de la celda
Contraste
Brillo
Definición
Color
Tinte (V/R)
: Normal
: 4
: 95
: 45
: 50
: 50
: V50/R50
Luz de la celda
Contraste
Brillo
: 4
: 95
: 45
Definición
Color
: 50
: 50
Tinte (V/R)
Configuración avanzada
: V50/R50
Opciones de imagen
Reinicio de la imagen
►
►
5.
Pulse los botones ◄ o ► hasta que el brillo cambie a 80.
.
Pulse el botón
ENTER
E
.
N
Pulse el botón
EXIT
para salir del menú.
▲
Brillo
Mover
▲
Brillo
▼
Mover
Ajustar
Ajustar
Ingresar
45
Regresar
Ingresar
80
Regresar
Español - 1
BN68-02143A-00SPA.indb 18 3/5/2009 3:46:21 PM
Función Plug & Play
Cuando el televisor se enciende por primera vez, los valores se inician correlativamente de forma automática.
N
N
El salvapantallas se activa si durante más de 1 minuto no hay ninguna entrada desde el teclado del mando a distancia mientras Plug & Play está en ejecución.
El salvapantallas se activa si durante más de 15 minutos no se detecta ninguna señal de funcionamiento.
1.
Pulse el botón
POWER
del mando a distancia.
Aparece el mensaje
Menu Language, Store Demo, Channels and Time will be set.
.
Pulse el botón
ENTER
E
y aparecerá automáticamente el menú
Define el idioma del menú
.
Pulse el botón
ENTER
E
.
Pulse los botones ▲ o ▼ para seleccionar el idioma y, a continuación, pulse el botón
ENTER
E
.
Se muestra el mensaje
Seleccione ‘Uso domiciliario’ para instalar este TV en su casa
.
.
Pulse los botones ◄ o ► para seleccionar
Demo comercio
o
Uso domiciliario
y, a continuación, pulse el botón
ENTER
E
.
Es recomendable configurar el televisor en el modo
Uso domiciliario
para obtener la mejor imagen en un entorno doméstico.
N
El modo
Demo comercio
sólo es necesario en los entornos comerciales.
Si accidentalmente se configura la unidad en el modo
Demo comercio
y se desea volver a
Uso domiciliario
(normal): Pulse el botón del volumen del televisor. Cuando se muestra la
OSD del volumen, mantenga pulsado el botón
MENU
del televisor durante 5 segundos.
4.
Se muestra el mensaje.
Seleccionar las antenas que desea memorizar
.
Pulse los botones ▲ o ▼ para memorizar los canales de conexión seleccionada. Pulse el botón
ENTER
E
para seleccionar
Iniciar
.
Aire
: Señal de antena
aire
.
•
•
•
N
Cable
: Señal de antena de
cable
.
Auto
: Señales de antena
aire
y por
cable
.
En el modo
Cable
puede seleccionar el origen de señal correcto entre
STD
,
HRC
e
IRC
con los botones ▲, ▼, ◄ o ►; a continuación, pulse el botón
ENTER
E
. Si tiene cable digital, seleccione la fuente de la señal del sistema de cable para analógica y para digital. Póngase en contacto con su proveedor de cable para averiguar el tipo de sistema de cable existente en su zona.
5.
El TV empezará a memorizar todos los canales disponibles.
Aire
Cable
Auto
Plug & Play
Menu Language, Store Demo, Channels, and Time will be set.
Iniciar
Plug & Play
Seleccionar las antenas que desea memorizar.
U
Mover Ingresar
Plug & Play
La programación automática está en progreso.
DTV Aire : -- Aire : --
DTV Cable : -- Cable : -Aire
3%
4
Detener
Plug & Play
Disfrute de su TV.
Ingresar
Ingresar
Iniciar
Iniciar
Iniciar
Omitir
Omitir
N
N
Para detener la búsqueda antes de que finalice, pulse el botón seleccionado.
ENTER
E
con
Detener
Aceptar
Una vez guardados todos los canales disponibles, se inicia la eliminación de los canales codificados. Vuelve a mostrarse el menú de programación automática.
Pulse el botón
ENTER
E
cuando se complete la memorización de canales.
.
Aparece automáticamente el mensaje
Configure el modo de Reloj
. Pulse el botón
ENTER
E
.
Pulse los botones ▲ o ▼ para seleccionar
Auto
y, a continuación, pulse el botón
ENTER
E
. Se muestra el mensaje
Configurar la hora de verano
.
Si selecciona
Manual
, se muestra
Configurar fecha y hora actuales
. Para obtener información detallada sobre
Manual
, consulte la página 33.
.
Pulse los botones ▲ o ▼ para seleccionar
Apagado
,
Encendido
o
Auto
y, a continuación, pulse el botón
ENTER
E
.
Aparece automáticamente la imagen para seleccionar la zona horaria donde usted vive.
.
Pulse los botones ▲ o ▼ para seleccionar la zona horaria y, a continuación, pulse el botón
ENTER
E
.
Si ha recibido una señal digital, se ajustará la hora automáticamente. En caso negativo, consulte la página 33 para ajustar el reloj.
.
Se muestra una breve instrucción sobre
Cómo conseguir el mejor rendimiento del nuevo HDTV
. Pulse el botón
ENTER
E
.
N
Puede acceder a la
Guía de conexión HD
en el menú
Soporte técnico
.
10.
Pulse el botón
ENTER
E
. Aparecerá el mensaje
Disfrute de su TV
.
Cuando termine, pulse el botón
ENTER
E
.
Si desea reiniciar esta función...
1.
Pulse el botón
MENU
para ver el menú. Pulse los botones ▲ o ▼ para seleccionar
Configuración
y, a continuación, pulse el botón
ENTER
E
.
.
Pulse de nuevo el botón
ENTER
E
para seleccionar
Plug & Play
. Para obtener más información sobre las opciones de configuración, vuelva a pulsar el botón
ENTER
E
.
N
La función
Plug & Play
está disponible sólo en el modo TV.
Plug & Play
Idioma
Tiempo
Modo Juego
V-Chip
Subtítulo
Melodía
: Español
: Apagado
: Medio
►
Español - 1
BN68-02143A-00SPA.indb 19 3/5/2009 3:46:22 PM
Control de los canales
Almacenamiento de canales
❑
❑
Antena→Aire/Cable
Antes de empezar a memorizar los canales disponibles, debe indicar el tipo de origen de la señal conectada al TV (es decir, antena o sistema de cable).
Antena : Aire
T
Pulse el botón
TOOLS
para mostrar el menú
Herramientas
.
También puede cambiar de antena seleccionando
Herramientas
→
Switch to
Cable Cambiar a Cable
(o
Aire
)
Prog. Auto
Borrar canal encriptado
Lista de canales
Prog. Auto
•
•
•
N
N
N
Sintonia Fina
Aire
: Señal de antena
aire
.
Cable
: Señal de antena de
cable
.
Auto
: Señales de antena
aire
y por
cable
.
STD
,
HRC
y
IRC
identifican los distintos tipos de sistemas de TV por cable. Póngase en contacto con su proveedor de cable para averiguar el tipo de sistema de cable existente en su zona. En este momento ya se ha seleccionado el origen de la señal.
Una vez guardados todos los canales disponibles, se inicia la eliminación de los canales codificados.
Vuelve a mostrarse el menú de programación automática.
Si desea detener la programación automática, pulse el botón
ENTER
E
.
Aparece el mensaje
¿Detener programación automática?
. Seleccione
Sí
con los botones
◄ o ► y, a continuación, pulse el botón
ENTER
E
.
►
❑
Supresión de los canales encriptados (digitales)
La función
Borrar canal encriptado
se usa para filtrar los canales codificados después de ejecutar la función
Prog. Auto
.
Puede tardar de 20 a 30 minutos.
N
Para detener la búsqueda de canales codificados: Pulse el botón
ENTER
E
para
N seleccionar
Detener
.
Pulse el botón ◄ para seleccionar
Sí
, y, a continuación, pulse el botón
ENTER
E
.
Esta función sólo está disponible en el modo
Cable
.
Borrar canal encriptado
Eliminando los canales encriptados.
DTV Cable 122
3%
Detener
Ingresar Regresar
❑
Sintonía fina (analógicos)
Utilice la sintonía fina para ajustar manualmente un canal concreto para que la recepción sea óptima.
N
N
N
Si no almacena en la memoria el canal que ha ajustado con la sintonía fina, los ajustes no se guardan.
El símbolo “*” aparecerá junto al nombre de los canales cuya sintonización se haya ajustado.
Para restablecer la sintonía fina, pulse el botón ▼ para seleccionar
Reiniciar
; a continuación pulse el botón
ENTER
E
.
Gestión de los canales
Aire 8*
Sintonia Fina
Reiniciar
U
Mover
L
Ajustar
Sintonía Fina
+5
Guardar Regresar
❑
•
•
•
•
Lista de canales
Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales.
O
También puede pulsar el botón de canales.
CH LIST
del mando a distancia para mostrar las listas
Todos los canales
: Muestra todos los canales disponibles actualmente.
Canales agregados
: Muestra todos los canales añadidos.
Favoritos
: Muestra todos los canales favoritos.
Grabación con temporizador
: Muestra todos los programas actualmente reservados.
•
•
•
Uso de los botones de colores en la lista de canales
Verde
(Zoom): Amplía o disminuye el número del canal.
Amarillo
(Seleccionar): Selecciona varias listas de canales.
T
TOOLS
(Herramientas): Muestra los menús
Agregar
o
Borrar
,
Agregar a Favoritos
o
Borrar de Favoritos
,
Visualización con temporizador
,
Edición de nombre de canal
,
Seleccionar todo
,
Deseleccionar todos,
y
Prog. Auto
(Los menús de
N
Iconos de la pantalla de estado del canal
♥
Canal configurado como favorito.
)
Un programa reservado c
Canal seleccionado al pulsar el botón amarillo.
(
Un programa que se está emitiendo.
Español - 0
BN68-02143A-00SPA.indb 20 3/5/2009 3:46:23 PM
❑
Menú de opciones de la lista de canales (en Todos los canales/Canales agregados/Favoritos)
N
N
Pulse el botón
TOOLS
para usar el menú de opciones.
Los elementos del menú de opciones pueden variar según el estado del canal.
Agregar/Borrar
Puede suprimir o añadir un canal para que se muestren los canales que desee.
N
N
N
N
Todos los canales borrados se mostrarán en el menú
Todos los canales
.
Un canal de color gris quiere decir que se ha borrado.
El menú
Agregar
sólo aparece con los canales borrados.
También puede borrar un canal en los menús
Canales agregados
o
Favoritos
de la misma manera.
Aire
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Aire
♥ TV #6
Aire
♥ TV #7
Aire
♥ TV #9
Aire
♥ TV #10
♥ TV #11
Aire
Borrar
Agregar a Favoritos
Visual. tempor
Edición de nombre de canal
Sel. Todo
Prog. Auto
Selección
T
Herramientas
Agregar a Favoritos/Borrar de Favoritos
Puede configurar como favoritos los canales que vea con más frecuencia.
T
Pulse el botón
TOOLS
para mostrar el menú
Herramientas
.
También puede configurar los canales favoritos seleccionando
Herramientas
→
Agregar a Favoritos (
o
Borrar de Favoritos )
N
N
O
Se mostrará el símbolo “♥” y el canal se configurará como favorito.
Todos los canales seleccionados se mostrarán en el menú
Favoritos
.
Si desea seleccionar los canales favoritos que ha configurado, pulse el botón
FAV.CH
en el mando a distancia.
Aire
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Aire
♥ TV #6
Aire
♥ TV #7
Aire
♥ TV #9
Aire
♥ TV #10
♥ TV #11
Aire
Borrar
Agregar a Favoritos
Visual. tempor
Edición de nombre de canal
Sel. Todo
Prog. Auto
Selección
T
Herramientas
Visual. tempor
Si reserva un programa que desea ver, el canal se cambia automáticamente al canal reservado en la lista de canales aunque esté viendo otro canal.
Para reservar un canal primero debe configurar la hora actual.
N
N
N
N
Sólo se pueden reservar los canales memorizados.
Puede ajustar el canal, el día, el mes, el año, la hora y el minuto directamente pulsando los botones numéricos del mando a distancia.
La reserva de un programa se muestra en el menú
Grabación con temporizador
.
Guía de programas digitales y reserva de visualización
: Si se ha seleccionado un canal digital y se pulsa el botón ► aparece la guía de programas del canal.
Se puede reservar un programa mediante el procedimiento descrito anteriormente.
Aire
6
6-1
7
7-1
9
9-1
10
10-1
11-1
19
Zoom
Aire
♥ TV #6
Aire
♥ TV #7
Aire
♥ TV #9
Aire
♥ TV #10
♥ TV #11
Aire
Borrar
Agregar a Favoritos
Visual. tempor
Edición de nombre de canal
Sel. Todo
Prog. Auto
Selección
T
Herramientas
•
•
Seleccionar todo/Deseleccionar todos
Seleccionar todo
: Puede seleccionar todos los canales de la lista.
N
Deseleccionar todos
: Puede desmarcar todos los canales seleccionados de la lista de canales.
Puede aplicar la función de agregar/borrar, agregar a favoritos/borrar de favoritos a varios canales al mismo tiempo. Seleccione
N
N los canales que desee y pulse el botón amarillo para configurar los canales seleccionados al mismo tiempo.
La marca c aparece a la izquierda de los canales seleccionados.
Sólo se puede seleccionar
Deseleccionar todos
si hay canales seleccionados.
Edición de nombre de canal (analógicos)
Los canales se pueden etiquetar con el propósito de que al seleccionar éstos se pueda ver su nombre.
N
Los nombres de los canales digitales se asignan automáticamente y no se pueden etiquetar.
❑
Menú de opciones de la lista de canales (en Grabación con temporizador)
Se puede ver, cambiar o borrar una reserva.
N
Pulse el botón
TOOLS
para usar el menú de opciones.
Cambiar información
Selecciónelo para cambiar la reserva de visualización.
9/20/2009
5:02 pm
9/19/2009
5:20 pm
3
Cambiar información
Cancelar programaciones
Información
Sel. Todo
Cancelar programaciones
Selecciónelo para cancelar la reserva de visualización.
Información
Aire Zoom Selección
Selecciónelo para ver una reserva de visualización. (También puede cambiar la información de la reserva.)
T
Herramientas
E
Información
Seleccionar todo/Deseleccionar todos
Puede seleccionar (o deseleccionar) todos los canales de la lista.
Español - 1
BN68-02143A-00SPA.indb 21 3/5/2009 3:46:24 PM
Control de la imagen
Cambio del tamaño de la imagen
❑
❑
Modo
Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización.
•
•
•
Dinámico
: Selecciona una imagen de alta definición para entornos muy iluminados.
Normal
: Selecciona la mejor visualización de la imagen para entornos normales.
Esta configuración es la más conveniente en la mayoría de situaciones.
Cine
: Selecciona una visualización de imagen confortable en entornos oscuros.
Modo
Luz de la celda
Contraste
Brillo
Definición
: Normal
: 4
: 95
: 45
: 50
•
•
•
•
•
•
Luz de la celda/Contraste/Brillo/Definición/Color/Tinte (V/R)
El televisor tiene varias opciones de configuración que permiten controlar la calidad de la imagen.
N
N
N
N
Color
Tinte (V/R)
: 50
: V50/R50
Luz de la celda
: Ajusta el brillo de los píxeles. 10 es la configuración más brillante.
Contraste
: Ajusta el nivel de contraste.
Brillo
: Ajusta el nivel de brillo.
Definición
: Ajusta el nivel de nitidez.
Color
: Ajusta la saturación del color de la imagen mediante la barra de la pantalla.
Tinte (V/R)
: Cuanto más cerca de Rojo 100, más saturado está el color rojo.
Cuando se cambian
Luz de la celda
,
Contraste
,
Brillo
,
Definición
,
Color
o
Tinte
(V/R)
, la presentación en la pantalla OSD se ajusta consecuentemente.
Modo
Luz de la celda
Contraste
Brillo
Definición
Color
En el modo
PC
,
Tinte (V/R)
,
Definición
y
Color
no están disponibles.
La configuración de cada dispositivo externo conectado a la entrada del televisor se
Tinte (V/R)
Configuración avanzada puede ajustar y guardar.
La energía consumida durante el uso se puede reducir significativamente si se disminuye el nivel del brillo.
: Normal
: 4
: 95
: 45
: 50
: 50
: V50/R50
❑
Configuración avanzada
Se puede ajustar detalladamente la configuración de la pantalla, incluidos el color y el contraste.
N
N
Configuraciónavanzada
está disponible en los modos
Normal
o
Cine
.
En el modo
PC
, sólo se pueden cambiar
Gamma
y
Balance de blanco
entre las opciones de
Configuraciónavanzada
.
•
•
•
•
Tono del negro
Se puede seleccionar el nivel de negro en la pantalla para ajustar la profundidad de ésta.
Apagado
: Desactiva la función de ajuste del negro.
Oscuro
: Establece la profundidad del color negro en un nivel oscuro.
Más oscuro
: Establece la profundidad del color negro en un nivel más oscuro.
El más oscuro
: Establece la profundidad del color negro en el nivel más oscuro.
•
•
•
•
Contraste Dinám.
Se puede ajustar el contraste de la pantalla para conseguir un contraste óptimo.
Apagado
: Desactiva la función de contraste dinámico.
Bajo
: Establece el contraste dinámico en un nivel bajo.
Medio
: Establece el contraste dinámico en un nivel medio.
Alto
: Establece el contraste dinámico en un nivel alto.
Gamma
Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul).
Tono del negro
Contraste Dinám.
Gamma
Espacio de color
Balance de blanco
Tono Piel
Mejora de perfiles
Configuración avanzada
: Apagado
: Medio
: 0
: Nativo
: 0
: Encendido
Mover Ingresar
►
►
►
Regresar
•
•
Espacio de color
El espacio de color es una matriz de color compuesta por los colores rojo, verde y azul. Seleccione su gama favorita de color y disfrute de unos colores auténticamente naturales.
Nativo
: Configura una gama de color más amplia que la de la fuente del vídeo de entrada.
Auto
: Configura automáticamente la gama de color de acuerdo con la fuente del vídeo de entrada.
Continúa…
Español -
BN68-02143A-00SPA.indb 22 3/5/2009 3:46:24 PM
•
•
•
•
•
•
•
Balance de blanco
Se puede ajustar la temperatura del color para conseguir colores más naturales.
N
Bal. Rojo
: Ajusta la intensidad del rojo en un nivel bajo.
Bal. Verde
: Ajusta la intensidad del verde en un nivel bajo.
Bal. Azul
: Ajusta la intensidad del azul en un nivel bajo.
Gan. Rojo
: Ajusta la intensidad del rojo en un nivel alto.
Gan. Verde
: Ajusta la intensidad del verde en un nivel alto.
Gan. Azul
: Ajusta la intensidad del azul en un nivel alto.
Reiniciar
: Restablece el balance de blancos predeterminado.
El cambio del valor de ajuste actualizará la pantalla ajustada.
Tono Piel
Permite acentuar el tono rosa en las imágenes.
N
El cambio del valor de ajuste actualizará la pantalla ajustada.
Mejoradeperfiles→Apagado/Encendido
Permite acentuar los bordes de los objetos en las imágenes.
Tono del negro
Contraste Dinám.
Gamma
Espacio de color
Balance de blanco
Tono Piel
Mejora de perfiles
Configuración avanzada
: Apagado
: Medio
: 0
: Nativo
: 0
: Encendido
Mover Ingresar
►
Regresar
❑
Opciones de imagen
N
En el modo
PC
sólo se pueden cambiar
Tono Color, Tamaño
y
Protección de pantalla
entre los elementos de
Opciones de imagen
.
TonoColor→Frío/Normal/Tibio1/Tibio2
Puede seleccionar el tono de color que le resulte más cómodo para la vista.
N
N
Tibio1
o
Tibio
sólo están disponibles cuando el modo de imagen es
Cine
.
La configuración de cada dispositivo externo conectado a la entrada del televisor se puede ajustar y guardar.
•
•
•
•
•
•
Tamaño
Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible que el receptor de satélite tenga también su propia gama de tamaños de pantalla. Sin embargo, en general, debe ver el televisor en el modo 16:9 tanto como sea posible.
O
1:
: Configura la imagen en una relación de aspecto 16:9.
Zoom1
: Alarga verticalmente la relación de aspecto 16:9.
Zoom2
: Alarga verticalmente una imagen ampliada con la función
Zoom1
.
Ajuste ancho
: Alarga horizontal y verticalmente una imagen para mostrarla mejor.
4:
: Configura la imagen en una relación de aspecto 4:3.
Ajuste pantalla
: Muestra la señal HD nativa completa que no se puede ver en un televisor normal.
También se puede pulsar varias veces el botón
P.SIZE
del mando a distancia para cambiar el tamaño de la imagen.
Tinte (V/R)
Configuración avanzada
: V50/R50
Opciones de imagen
Reinicio de la imagen
Tono Color
Tamaño
Digital NR
N.neg HDMI
Modo película
Opciones de imagen
: Normal
: 16:9
: Auto
: Normal
: Apagado
Protección de pantalla
Mover Ingresar
►
►
Regresar
1: Zoom1 Zoom2
Ajuste ancho 4: Ajuste a pantalla
N
N
N
N
Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas.
Después de seleccionar
Zoom1
,
Zoom2
o
Ajuste ancho
:
Pulse los botones ◄ o ► para seleccionar
Posición
y, a continuación, pulse el botón
ENTER
E
.
Pulse los botones ▲ o ▼ para desplazar la imagen hacia arriba o hacia abajo.
Después de seleccionar
Ajuste a pantalla
en los modos HDMI (1080i/1080p) o Componente (1080i/1080p), quizás deba centrar la imagen: Pulse los botones ◄ o ► para seleccionar
Posición
y, a continuación, pulse el botón
ENTER
E
.
Pulse los botones ▲, ▼, ◄ o ► para mover la imagen.
Reiniciar
: Pulse los botones ◄ o ► para seleccionar
Reiniciar
y, a continuación, pulse el botón
ENTER
E
. El televisor recupera la relación 16:9.
HD (alta definición): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
Español -
Continúa…
BN68-02143A-00SPA.indb 23 3/5/2009 3:46:28 PM
N
N
Se puede ajustar y almacenar la configuración de cada dispositivo que esté conectado a una entrada del televisor.
En el modo
PC
, sólo se pueden ajustar los modos
1:
y
4:
.
La configuración de cada dispositivo externo conectado a la entrada del televisor se puede ajustar y guardar.
Fuente de entrada
ATV, Vídeo, Componente (480i, 480p)
Componente (720p)
DTV(1080i), Componente (1080i, 1080p), HDMI (720p, 1080i, 1080P)
PC
Tamaño de imagen
16:9,Zoom1,Zoom2,4:3
1:, Ajuste ancho, 4:
1:, 4:, Ajuste ancho, Ajuste a pantalla
1:, 4:
•
•
•
•
•
Digital NR
Si la señal de emisión que recibe el TV es débil, puede activarse la función Digital NR
(Reducción digital del ruido) para reducir la estática y las imágenes superpuestas que pueden aparecer en la pantalla.
Apagado
: Desactiva la función de reducción de ruido digital.
Bajo
: Configura la reducción de ruido digital en el nivel bajo.
Medio
: Configura la reducción de ruido digital en el nivel medio.
Alto
: Configura la reducción de ruido digital en el nivel alto.
Auto
: Configura la reducción de ruido digital en Automático.
Tinte (V/R)
Configuración avanzada
: V50/R50
Opciones de imagen
Reinicio de la imagen
•
•
N.neg HDMI
Se puede seleccionar directamente el nivel de negro en la pantalla para ajustar la profundidad de ésta.
N
Normal
Bajo
: La pantalla se ve más brillante.
: La pantalla se ve más oscura.
Esta función sólo está activa cuando un dispositivo externo está conectado al televisor a través de HDMI. La función
N.neg HDMI
puede que no sea compatible con todos los dispositivos externos.
Tono Color
Tamaño
Digital NR
N.neg HDMI
Modo película
Opciones de imagen
Modo película
El televisor se puede configurar para que perciba y procese automáticamente las señales de película de todas las fuentes y ajuste la mejor calidad de imagen.
•
•
N
Protección de pantalla
Mover
Apagado
: Aplicado procesamiento básico de imágenes de vídeo y no detección automática para programas de películas.
Auto
: Ajusta automáticamente para obtener la mejor calidad de imagen entre programas de películas y vídeo.
Modo película
es compatible con TV, Vídeo, Componente (480i/1080i) y HDMI (1080i).
: Normal
: 16:9
: Auto
: Normal
: Apagado
Ingresar
►
►
Regresar
Protección de pantalla
Configura las opciones de
Protección de pantalla
para evitar y reducir el quemado de píxeles.
Cuando una imagen permanece en una posición por mucho tiempo, puede ocasionar un quemado permanente en la pantalla.
Protección de pantalla
Cambio de píxel
Desplazamiento
Lateral gris
Mover
: Oscuro
Ingresar
►
Regresar
Prevención del desgaste de la pantalla
Esta pantalla está equipada con tecnología de prevención para reducir la posibilidad de que se queme. Esta tecnología permite definir el movimiento de la imagen arriba o abajo (línea vertical) y de lado a lado (punto horizontal).
El ajuste del tiempo permite programar intervalos temporales entre los movimientos de la imagen en minutos.
•
N
Cambio de píxel
: Con esta función podrá mover píxeles de forma detallada en el PDP, en sentido horizontal o vertical, para evitar restos de imágenes en la pantalla.
Condición óptima para cambio de píxel:
Horizontal
Vertical
Tiempo (min)
Elemento
0~4
0~4
1~4 min.
TV/AV/Componente/HDMI/PC
4
4
2 min.
•
Lateral gris:
Cuando se ve la televisión con una relación de pantalla de 4:3, ésta se puede proteger de un posible daño si se ajusta el balance de blanco en ambos extremos, el izquierdo y el derecho. Para prevenir que la pantalla se queme, seleccione
Oscuro o Claro.
-
Oscuro
: Cuando se establece una relación de pantalla de 4:3, con esta opción se oscurecen ambos extremos, el izquierdo y el derecho.
-
Claro
: Cuando se establece una relación de pantalla de 4:3, con esta opción se aclaran ambos extremos, el izquierdo y el derecho.
Español - 4
BN68-02143A-00SPA.indb 24 3/5/2009 3:46:29 PM
Reducción de los efectos de una pantalla quemada
Si la pantalla se ha quemado, puede seleccionar desplazamiento o lateral gris para que le ayude a retirar los elementos quemados.
•
Desplazamiento
: Esta función suprime los restos de imágenes en la pantalla moviendo todos los píxeles del PDP de acuerdo con un patrón. Utilice esta función si hay restos de imágenes o símbolos en la pantalla, especialmente
después de haber mostrado una imagen fija en la pantalla durante un largo tiempo.
N
La función de supresión de restos de imágenes debe aplicarse durante largo tiempo (aproximadamente 1 hora) para que
N sea efectiva. Si los restos de imágenes no desaparecen después de ejecutar la función, repita el proceso.
Pulse cualquier tecla del mando a distancia para cancelar esta función.
❑
Reiniciodelaimagen→Reinic.modoimagen/Cancelar
Restablece todos los ajustes predeterminados.
N
Seleccione un modo de imagen que desee restaurar. La restauración se realiza en cada modo de imagen.
Configuración avanzada
Opciones de imagen
Reinicio de la imagen
►
BN68-02143A-00SPA.indb 25
Español - 5
3/5/2009 3:46:30 PM
Pantalla de PC
Uso del televisor como una pantalla de ordenador (PC)
Configuración del software del PC (basado en Windows XP)
A continuación se muestra la configuración de pantalla de Windows para un ordenador típico.
Probablemente la pantalla real de su PC sea distinta, según la versión concreta de Windows y de la tarjeta de vídeo que tenga. Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma.
(En caso contrario, póngase en contacto con el fabricante del ordenador o con el distribuidor de
Samsung.)
1.
Primero, haga clic en
Panel de control
en el menú de inicio de Windows.
.
Cuando aparezca la ventana del panel de control, haga clic en
Apariencia y temas
y aparecerá un cuadro de diálogo.
.
Cuando aparezca la ventana del panel de control, haga clic en
Pantalla
y aparecerá un cuadro de diálogo.
4.
Vaya a la pestaña
Configuración
en el cuadro de diálogo. Configuración correcta del tamaño (resolución) óptima: 1920 x 1080 píxeles Si existe una opción de frecuencia vertical en el cuadro de diálogo de configuración de la pantalla, el valor correcto es de
0
o
0 Hz
. Si no, haga clic en
Aceptar
y salga del cuadro de diálogo.
Modos de pantalla
Si la señal del sistema es igual al modo de señal estándar, la pantalla se ajusta automáticamente. Si la señal del sistema no es igual
al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo; de lo contrario, puede no haber señal de vídeo. La imagen de pantalla se ha optimizado durante la fabricación para los siguientes modos de visualización.
Entradas D-Sub y HDMI/DVI
Modo
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
Resolución
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
801 x 600
802 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 800
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
Frecuencia horizontal (kHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
44.772
56.456
75.231
60.023
67.500
49.702
62.795
60.000
63.981
79.976
47.712
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
55.935
70.635
65.290
52.500
74.620
Frecuencia vertical (Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
59.855
74.777
74.857
75.029
75.000
59.810
74.934
60.000
60.020
75.025
60.015
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
59.887
74.984
59.954
70.000
70.000
Frecuencia de reloj de píxeles
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
74.500
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
83.500
106.500
108.000
108.000
135.000
85.500
106.500
136.750
146.250
89.040
128.943
N
VESA DMT/
DTV CEA
1920 x 1080p 67.500
60.000
148.500
Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI).
Polaridad sincr.
(H/V)
+ / -
- / +
- / -
- / -
- / +
- / +
- / +
- / +
- / +
- / +
+ / +
+ / +
- / +
- / +
+ / +
+ / +
+ / +
+ / +
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
- / +
- / +
- / +
- / +
- / -
+ / +
Español -
BN68-02143A-00SPA.indb 26 3/5/2009 3:46:30 PM
Ajuste del televisor con el ordenador
❑
Ajuste Automático
Mediante la función
Ajuste Automático
se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que reciba. Esta función también ajusta automáticamente la configuración, los valores de frecuencia y la posición.
T
N
N
Pulse el botón
TOOLS para mostrar el menú Herramientas.
También puede establecer el ajuste automático seleccionando Herramientas
→ Ajuste Automático.
Preselección: Pulse el botón
SOURCE
para seleccionar el modo
PC
.
Esta función no se puede utilizar en modo DVI-Digital.
❑
Pantalla
El objetivo del ajuste de la calidad de imagen es eliminar o reducir las interferencias.
Si no se eliminan mediante la sintonización fina, ajuste la frecuencia vertical en el PC y vuelva a realizar la sintonización fina.
Cuando se hayan reducido las interferencias, vuelva a ajustar la imagen de forma que esté centrada en la pantalla.
N
Preselección: Pulse el botón
SOURCE
para seleccionar el modo
PC
.
Grueso
Ajusta la frecuencia si hay distorsiones verticales en la pantalla.
Fino
Ajusta la pantalla para que sea más clara.
Posición de PC
Ajuste la posición de la pantalla del PC si no se acopla a la pantalla del TV. Pulse los botones ▲ o ▼ para ajustar la posición vertical. Pulse los botones ◄ o ► para ajustar la posición horizontal.
Reiniciar Imagen
Puede recuperar todos los ajustes de imagen predeterminados de fábrica.
Grueso
Fino
Posición de PC
Reiniciar Imagen
Brillo
Definición
Ajuste Automático
Pantalla
Configuración avanzada
Opciones de imagen
Reinicio de la imagen
: 45
: 50
Pantalla
Mover
►
50 ►
38
Mover Ingresar
Posición de PC
Regresar
Ingresar Regresar
BN68-02143A-00SPA.indb 27
Español -
3/5/2009 3:46:31 PM
Control del sonido
Cambio de la configuración del sonido
❑
•
•
•
•
•
Modo
Puede seleccionar el modo de sonido que mejor se ajuste al programa que está viendo.
Normal
: Este modo de sonido es de aplicación general.
Música
: El modo Música permite oír música como si se estuviera en una sala de conciertos.
Cine
: El modo Cine proporciona un sonido completo de película en directo como si se estuviera en una sala de cine.
Voz clara
: Realza las voces respecto de los sonidos. Seleccione este modo de sonido para ver noticiarios, telenovelas o documentales.
Favorito
: Puede personalizar los ajustes de sonido para que se ajusten a sus preferencias personales.
T
Pulse el botón
TOOLS
para ver el menú
Herramientas
..
También puede configurar el modo del sonido seleccionando
Herramientas
→
Modo de sonido
Modo : Favorito
Ecualizador
Trusurround SRS HD : Apagado
Idioma preferido
Sonido Multi-track
: Español
: Estéreo
Vol.Auto : Apagado
Seleccionar altavoz : Altavoz de TV
►
❑
•
•
•
•
Ecualizador
Es posible ajustar los parámetros del sonido según las preferencias personales.
Modo
: Selecciona el modo de sonido entre los valores predefinidos.
Balance I/D
: Ajusta el balance entre los altavoces izquierdo y derecho.
100Hz, 00Hz, 1kHz, kHz, 10kHz
(Ajuste del ancho de banda): Ajusta el nivel de las diferentes frecuencias de ancho de banda.
Reiniciar
: Restablece todos los ajustes predeterminados del ecualizador.
❑
TrusurroundSRSHD→Apagado/Encendido
SRS TruSurround HD permite disfrutar de los efectos de sonido surround de 5.1 canales en los dos altavoces del televisor.
Esta función proporciona no sólo unos bajos profundos más ricos sino que también mejora la resolución de las frecuencias altas.
O
Puede seleccionar estas opciones pulsando el botón
SRS
del mando a distancia.
Modo
Balance
100Hz
300Hz
1kHz
3kHz
10kHz
-
-
L
-
-
-
▼
Mover
Ecualizador
: Favorito
Ajustar Ingresar
TruSurround HD
, SRS y el símbolo son marcas registradas de SRS Labs, Inc. La tecnología
TruSurround HD
está incorporada bajo licencia de SRS Labs, Inc.
+
+
R
+
+
+
Regresar
❑
Idioma preferido (digitales)
El sistema de emisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas).
N
O
Sólo se puede seleccionar uno de los idiomas que ofrece la emisora.
Puede seleccionar un idioma que no sea el
Idioma preferido
pulsando el botón
MTS
del mando a distancia.
❑
Sonido Multi-track (analógicos)
•
•
•
N
O
Mono
: Elija para canales que emiten en monoaural o si tiene dificultades con la recepción de señales estéreo.
Estéreo
: Elija para canales que emiten en estéreo.
SAP
: Elija esta opción para escuchar el programa de audio independiente,
que normalmente es una traducción de otro idioma.
En función del programa concreto emitido, puede escuchar en modo
Mono, Estéreo o
SAP
.
Pulse varias veces el botón
MTS
del mando a distancia para seleccionar
Mono
,
Estéreo
o
SAP
.
❑
Vol.Auto→Apagado/Encendido
Cada emisora tiene sus propias condiciones de señal y resulta incómodo ajustar el volumen cada vez que se cambia de canal.
Esta función permite ajustar automáticamente el volumen de un canal disminuyendo la salida de sonido cuando la señal de modulación es alta o aumentando la salida de sonido cuando la señal de modulación es baja.
Continúa…
Español -
BN68-02143A-00SPA.indb 28 3/5/2009 3:46:31 PM
❑
Seleccionar altavoz
Cuando se ve el televisor conectado a un sistema Home Cinema, se debe apagar el altavoz del televisor para que la salida de audio del televisor utilice los altavoces del
Home Cinema (externos).
•
•
N
N
Altavoz externo
: Utiliza los altavoces externos (Home Cinema) para la salida de sonido.
Altavoz de TV
: Utiliza los altavoces del TV para la salida de sonido.
Si se selecciona
Altavoz externo
en el menú
Seleccionar altavoz
, se limita la configuración del sonido.
Los botones de volumen y
M
MUTE
no funcionan si
Seleccionar altavoz
está establecido en
Altavoz externo
.
Configure el volumen del sistema Home Cinema.
Altavoz de TV
Altavoz externo
Sin señal del vídeo
Altavoces internos del televisor
TV
/
AV
/
Componente
/
PC
/
HDMI
Salida para altavoces
Silencio
Silencio
Sonido Multi-track
Vol.Auto
: Estéreo
: Apagado
Seleccionar altavoz : Altavoz de TV
►
Reinicio del sonido
Salida de audio (Optical, R/L Out) para el sistema de sonido
TV
/
AV
/
Componente
/
PC
/
HDMI
Salida de sonido
Salida de sonido
Silencio
Fabricado bajo licencia de Dolby Laboratories.
Dolby y el símbolo de la doble D son marcas comerciales de Dolby Laboratories.
❑
•
•
•
Reinicio del sonido
Puede restaurar la configuración del sonido con los valores predeterminados de fábrica.
Reiniciar todo
: Todos los valores del sonido vuelven a la configuración predeterminada.
Reinic. modo sonido
: Los valores actuales del sonido vuelven a la configuración predeterminada.
Cancelar
: Seleccione las opciones de reinicio de sonido.
Descripción de las funciones
Configuración del menú de configuración
❑
❑
Idioma
Se puede configurar el idioma de los menús.
Plug & Play
Idioma : Español
►
Modo Juego→Apagado/Encendido
Si se conecta a una consola de videojuegos como PlayStationTM o XboxTM, podrá obtener sensaciones más realistas seleccionando el menú de juegos.
Tiempo
Modo Juego
V-Chip
: Apagado
•
•
SielmodoJuegoestáencendido
•
El modo Imagen cambia automáticamente a
Normal
y no se puede cambiar.
El modo Sonido cambia automáticamente a
Favorito
y no se puede cambiar. Ajuste el
Subtítulo
Melodía
Ahorro energía
: Medio
: Apagado sonido con el ecualizador.
La función
Reiniciar
se activa en el menú Sonido. La función
Reiniciar
inicializa la configuración del
Ecualizador
con los
N
N
N
N
N
N parámetros de fábrica.
ModoJuego
no está disponible en el modo normal de TV o
ModoJuego
está establecido como
Apagado
.
Si la calidad de la imagen es deficiente cuando un dispositivo externo está conectado al televisor, compruebe si la opción
Modo
Juego
está establecida como
Encendido
.
Cuando se muestra el menú de TV en el
ModoJuego
, la pantalla tiembla ligeramente.
La marca ( ) que aparece en la pantalla indica que la opción
ModoJuego
está activa con la fuente seleccionada.
Esta función sólo admite la función de juegos.
ModoJuego
no está disponible en el modo
PC
.
BN68-02143A-00SPA.indb 29
Español -
Continúa…
3/5/2009 3:46:32 PM
❑
V-Chip
La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las restricciones de V-Chip.
N
La función
V-Chip
no está disponible en los modos
HDMI
,
Componente
o
PC
.
N
N
N
El código PIN predeterminado para un televisor nuevo es ‘0-0-0-0’.
Si olvida el PIN, pulse los botones del mando a distancia en la siguiente secuencia para reiniciar el código a ‘0-0-0-0’: Apagar →
M
MUTE
→ → →
4
→ Encender.
Perm. todo
: Se pulsa para desbloquear todos los programas de televisión. /
Bloq. todo
: Se pulsa para bloquear todos los programas de televisión.
BloqueoV-Chip→Apagado/Encendido
Desactiva la función V-Chip.
Guías pater. TV
Mover Ingresar
Perm. todo
Bloq. todo
Regresar
Guías pater. TV
En primer lugar, configure un número de identificación personal (PIN) y active la función V-Chip.
Las limitaciones pueden configurarse de dos formas: Las guías de TV o la clasificación MPAA.
•
Categorías básicas
•
N
-
TV-Y
: Niños pequeños/
TV-Y
: Niños de más de 7 años/
TV-G
: Todos los públicos/
TV-PG
: Supervisión paterna/
TV-14
: Mayores de 14 años/
TV-MA
: Audiencia adulta
Subclasificaciones
-
All (Todos)
: Bloquea todas las clasificaciones de TV. /
FV
: Violencia y fantasía/
V
: Violencia/
S
: Contenido sexual
/
L
: Lenguaje grosero/
D
: Diálogo de contenido sexual
La función V-Chip bloqueará automáticamente cualquier categoría que sea más restrictiva.
Por ejemplo, si bloquea la categoría
TV-Y
, automáticamente se bloqueará
TV-Y
. De forma similar, si bloquea la categoría TV-
G, todas las categorías del grupo adultos jóvenes se bloquearán (
TV-G, TV-PG, TV-14-14 y
V-MA).
Las subclasificaciones
(
D, L, S, V
) funcionan de manera similar.
•
•
•
•
•
•
•
Clas. MPAA
El sistema de clasificación MPAA utiliza el sistema de la Motion Picture Association of
America (Asociación americana de cinematografía) y se aplica principalmente en las películas. Cuando el bloqueo V-Chip está activado, el televisor bloquea automáticamente cualquier programa que tenga una determinada clasificación (ya sea según la clasificación MPAA o según la guía de programas de TV).
N
N
G
R
X
: Todos los públicos (sin restricciones).
PG
NR
: Se sugiere la compañía de un adulto.
PG-1
NC-1
: Menores acompañados de un adulto.
: Restringido. Menores de 17 acompañados por un adulto.
: Prohibido a menores de 17 años.
: Sólo adultos.
: Sin clasificar.
Con una determinada categoría seleccionada, pulse el botón
ENTER
E
para activarla.
Aparecerá el símbolo “ \ ”. Pulse el botón
ENTER
E
para bloquear o desbloquear la categoría.
El V-Chip bloqueará automáticamente cualquier categoría que sea
más restrictiva
.
Por ejemplo, si bloquea la categoría
PG-1
, también se bloquearán automáticamente
R
,
NC-1
y
X
.
Clas. MPAA
Mover
Perm. todo
Bloq. todo
Ingresar
•
•
•
•
•
•
Inglés Canadiense
Puede bloquear los programas de TV según la clasificación Inglés Canadiense.
N
C
: Programación para niños menores de 8 años.
C+
: Programación generalmente considerada aceptable para niños mayores de 8 años sin acompañamiento de adultos.
G
: Programación general, ideal para todas las audiencias.
PG
: Supervisión paterna.
14+
: La programación contiene temas y contenidos que puede que no sean adecuados para menores de 14 años.
1+
: Programación para adultos.
El V-Chip bloqueará automáticamente cualquier categoría que sea
más restrictiva
.
Por ejemplo, si bloquea la categoría
G
, automáticamente también se bloqueará
PG, 14+
y
1+
.
Regresar
Francés Canadiense
Puede bloquear los programas de TV según la clasificación Francés Canadiense.
•
•
•
•
•
N
G
: General
ans+
: Programación generalmente considerada aceptable para niños mayores de 8 años sin acompañamiento de adultos.
1 ans+
: Es posible que la programación no sea adecuada para niños menores de
13 años.
1 ans+
: Es posible que la programación no sea adecuada para niños menores de
16 años.
1 ans+
: Programación restringida para adultos.
El V-Chip bloqueará automáticamente cualquier categoría que sea
más restrictiva
.
Por ejemplo, si bloquea la categoría
ans+
, también se bloquearán automáticamente
1 ans+, 1 ans+
y
1 ans+
.
Español - 0
Francés Canadiense
Mover
Perm. todo
Bloq. todo
Ingresar Regresar
Continúa…
BN68-02143A-00SPA.indb 30 3/5/2009 3:46:33 PM
Clasificación U.S. Descargable
La información de la restricción paterna se puede usar mientras se ven los canales DTV.
N
N
N
N
N
N
N
Si la información no se descarga desde la emisora, el menú
Downloadable U.S. Rating
está desactivado.
La información de la restricción de bloqueo se puede descargar automáticamente mientras se ven los canales DTV. Esto puede tardar algunos segundos.
El menú
Downloadable U.S. Rating
está disponible después de que la información se haya descargado desde la emisora. Sin embargo, según el tipo de información de la emisora, el menú podría no estar disponible para su uso.
Los niveles de restricción paterna difieren según la emisora. El nombre de menú
Título de clasificación
Clasificación U.S. Descargable
Nivel humor
DH
MH
H
VH
EH predeterminado y la
Clasificación U.S. Descargable
cambian según la información descargada.
Aunque configure la visualización en pantalla en su propio idioma, el menú
Clasificación
U.S. Descargable
siempre lo verá en inglés.
El número de la información de
Mover
La clasificación bloqueará automáticamente cualquier categoría que sea más restrictiva.
Los títulos de clasificación (por ejemplo, nivel de humor, etc) y las clasificaciones de televisión
(por ejemplo,
DH, MH, H
, etc.) pueden variar de acuerdo con la emisora.
clasificación actual
►
Ingresar
El número de toda la información de clasificación
1/2
Perm. todo
Bloq. todo
Regresar
Cambiar Código
Puede cambiar el código de cuatro dígitos para usar la función V-Chip.
N
N
El código PIN predeterminado para un televisor nuevo es ‘0-0-0-0’.
Si cambia el código PIN completamente, se muestra el mensaje
PIN is changed successfully. (Código cambiado correctamente)
.
Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (Escape de emergencia)
Si el TV se sintoniza en un canal restringido, V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el mensaje siguiente:
1.
Escriba su código PIN.
Para volver al modo de visualización normal, sintonice un canal diferente con los botones
CH
>
. En determinadas condiciones (en función de la clasificación de los programas de TV locales), V-Chip puede bloquear todos los canales. En este caso, utilice la función
V-Chip como “salida de emergencia”:
N
Si olvida el PIN, pulse los botones del mando a distancia en la siguiente secuencia para reiniciar el código a ‘0-0-0-0’: Apagar →
M
MUTE
→ → →
4
→ Encender.
Received Rating : TV-14/NL
Canal bloqueado por el Control Paterno. Introduzca PIN para desbloquear.
CH
Cambiar 0~9 Ingresar Código
❑
Subtítulo (mensajes de texto en pantalla)
N
N
O
La función de subtítulos no está disponible en los modos
Componente
,
HDMI
o
PC
.
La disponibilidad de los subtítulos depende del programa que se esté emitiendo.
Pulse el botón
CC
del mando a distancia para seleccionar
Subtítulo (Encendido)
o
Subtítulo (Apagado)
.
Analógico
La función de subtítulos analógicos funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, la función de subtítulos analógicos puede funcionar en canales digitales.)
•
Modo de Subtítulo
:
Programado, CC1~CC4, Texto1~Texto4
Modo Juego
V-Chip
Subtítulo
Melodía
Ahorro energía
: Apagado
: Medio
: Apagado
•
•
Digital
La función de subtítulos digitales funciona en canales digitales.
-
-
-
-
-
-
-
Modo de Subtítulo
:
Programado
,
Servicio1~Servicio
,
CC1~CC4
,
Texto1~Texto4
Opciones - Subtítulos Dig.
Tamaño:
Se puede seleccionar el tamaño de la fuente del subtítulo.
Estilo fuente:
Se puede seleccionar la fuente del subtítulo.
Color de primer plano
: Se puede seleccionar el color de los subtítulos.
Color de fondo
: Se puede seleccionar el color del fondo de los subtítulos.
Opacidad de primer plano
: Se puede cambiar la opacidad del primer plano de los subtítulos.
Subtítulo
Modo de Subtítulo
Subtítulo
Opciones - Subtítulos Dig.
: Encendido
: Programado
Mover
Opacidad de fondo
: Se puede seleccionar la opacidad del fondo de los subtítulos.
Regresar al Predeterminado
: Restaura la configuración predeterminada de la estación emisora de los subtítulos.
Ingresar
N
N
N
N
N
►
Regresar
Opciones - Subtítulos Dig.
sólo están disponibles cuando
Programado
y
Servicio1~Servicio
se han seleccionado en el
Modo de Subtítulo
.
Servicio1~
en el modo de subtítulos digital pueden no estar disponibles según el tipo de emisión.
Programado
significa que se sigue el estándar establecido por el emisor.
Las opciones de color de primer plano y color de fondo no se pueden ajustar con el mismo color.
Las opciones de opacidad de primer plano y de fondo no pueden ajustarse a la vez en transparente.
►
Español - 1
BN68-02143A-00SPA.indb 31 3/5/2009 3:46:33 PM
❑
•
•
•
•
Melodía
Se puede establecer un sonido de melodía que se oiga cuando el televisor se encienda o se apague.
N
Apagado
: Apaga la función de la melodía.
Bajo
: Establece el volumen de la melodía en un nivel bajo.
Medio
: Establece el volumen de la melodía en un nivel medio.
Alto
: Establece el volumen de la melodía en un nivel alto.
La melodía no se reproduce.
-
-
-
V-Chip
Subtítulo
Melodía
Ahorro energía
Cuando no hay salida de sonido desde el televisor porque se ha activado el botón
M
MUTE
.
Cuando no hay salida de sonido desde el televisor porque se ha reducido al mínimo con el botón
VOL
Cuando la función de temporizador ha apagado el televisor.
.
: Medio
: Apagado
❑
Ahorro energía
•
•
•
•
Esta función ajusta el brillo del televisor, lo cual reduce el consumo de energía. Si desea ver la televisión por la noche, ajuste la opción del modo
Ahorro energía
en
Alto
; sus ojos se lo agradecerán y, además, reducirá el consumo de energía.
Apagado:
Desactiva la función de ahorro de energía.
Bajo:
Establece la función de ahorro de energía en sus valores bajos.
Medio:
Establece la función de ahorro de energía en sus valores medios.
Alto:
Establece la función de ahorro de energía en sus valores máximos.
►
BN68-02143A-00SPA.indb 32
Español -
3/5/2009 3:46:34 PM
Configuración de la hora
Para usar las diferentes funciones del temporizador del televisor es necesario configurar el reloj. Asimismo, se puede comprobar la hora mientras se ve la televisión.
(Pulse el botón INFO.)
❑
Plug & Play
Idioma
Tiempo
: Español
►
Tiempo
Modo Juego
V-Chip
: Apagado
1.
Pulse el botón
MENU
para ver el menú.
.
Pulse los botones ▲ o ▼ para seleccionar
Configuración
y, a continuación, pulse el botón
ENTER
E
.
Subtítulo
Melodía
Ahorro energía
: Medio
: Apagado
.
Pulse los botones ▲ o ▼ para seleccionar
Tiempo
y, a continuación, pulse el botón
ENTER
E
.
Reloj
Reloj
•
•
Modo Reloj
Puede configurar la hora actual en forma manual o automática.
Config.Reloj
Puede ajustar la hora actual manualmente.
N
N
→
Auto
/
Manual
Modo Reloj
Config. Reloj
Zona Tiempo
Horario de Verano
: Auto
: Este
: Apagado
Esta función sólo está disponible si
Modo Reloj
está configurado como
Manual
.
Mover Ingresar
Puede ajustar
Mes, Día, Año, Hora
o
Minuto
directamente pulsando los botones numéricos del mando a distancia.
Regresar
►
•
•
ZonaTiempo
Seleccione su zona horaria.
N
N
N
Esta función sólo está disponible si
Modo Reloj
está configurado como
Auto
.
Según la emisora y la señal, la hora automática no se puede ajustar correctamente. En tal caso, debe hacerlo manualmente.
La antena o el cable deben estar conectados para ajustar la hora automáticamente.
DST
(horario de verano) →
Apagado
/
Encendido
/
Auto
Activa o desactiva la función de horario de verano.
N
Esta función sólo está disponible si
Modo Reloj
está configurado como
Auto
.
Temporizador
El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (30, 60, 90, 120, 150 y 180 minutos).
T
Pulse el botón
También puede configurar el temporizador seleccionando
Temporizador
.
TOOLS
para ver el menú
Herramientas
.
Herramientas→
Reloj
Temporizador
Temporizador 1
Temporizador 2
Temporizador 3
30 min.
60 min.
90 min.
120 min.
150 min.
180 min.
•
•
Temporizador 1/Temporizador /Temporizador
Utilice esta función para que el televisor se encienda o apague a una hora concreta. Se pueden activar/desactivar 3 horas distintas. Debe ajustar el reloj en primer lugar.
•
•
-
-
-
-
Hora de encendido
: Ajuste la hora, los minutos, am/pm y activar/inactivo.
(Para activar el temporizador con la configuración elegida, establézcalo en
Activar
.)
Hora de apagado
: Ajuste la hora, los minutos, am/pm y activar/inactivo.
(Para activar el temporizador con la configuración elegida, establézcalo en
Activar
.)
Volumen
: Configure el nivel de volumen deseado.
Contenido
: Cuando la opción Hora de encendido está activa, se puede encender un canal determinado o reproducir contenidos como archivos de fotos o de audio.
-
TV/USB
: Permite seleccionar TV o USB.
(Compruebe que haya un dispositivo USB conectado al televisor.)
Antena
: Seleccione aérea o de cable.
Canal
: Permite seleccionar el canal deseado.
Música
: Permite seleccionar la carpeta del dispositivo USB con archivos MP3.
Foto
: Permite seleccionar la carpeta del dispositivo USB con archivos JPEG.
•
Repetir
: Seleccione
Una vez
,
Cada día
,
Lun~Vie
,
Lun~Sáb
,
Sáb~Dom
o
Manual
.
N
Con
Manual
seleccionado, pulse el botón ► para seleccionar el día de la semana.
Pulse el botón
ENTER
E
sobre el día deseado y aparecerá la marca c
.
N
N
Hora de encendido
12 00
Hora de apagado
12 00
Volumen Origen
10 TV
Repetir Dom Lun Mar Mie Jue Vie Sáb
Una vez
Mover
Mover Ingresar
Temporizador 1
Aire
Ajustar am am
3
Ingresar
Regresar
Inactivo
Inactivo
Regresar
Puede ajustar la hora, los minutos y el canal pulsando los botones numéricos del mando a distancia.
Apagado automático
Si activa el temporizador, el televisor se apagará si no se pulsa ningún botón durante 3 horas, después de que el temporizador lo haya puesto en marcha. Esta función sólo está disponible con el temporizador activado y evita el recalentamiento que se puede producir si el televisor está encendido durante demasiado tiempo.
Español -
BN68-02143A-00SPA.indb 33 3/5/2009 3:46:34 PM
Lista de Entradas/Editar Nombre
❑
Lista de Entradas
Se utiliza para seleccionar TV u otras fuentes de entrada externas como reproductores
DVD/Blu-ray/receptores por cable/ satélite (decodificadores) conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera.
TV, AV1, AV, Componente1, Componente, PC, HDMI1, HDMI/DVI, HDMI.
N
N
Sólo se puede elegir los dispositivos externos que estén conectados al televisor. En
Lista de Entradas
, las entradas conectadas se resaltan y se ordenan en la parte superior. Las entradas que no están conectadas se ordenan en la parte inferior.
Uso de los botones de colores del mando a distancia con la lista de entradas
•
•
Rojo
(actualizar): Actualiza los dispositivos externos conectados.
Púlselo si la entrada está activada y conectada pero no se muestra en la lista.
T
TOOLS
(Herramientas): Muestra los menús
Editar Nombre
e
Información
.
O
Pulse el botón
SOURCE
del mando a distancia para ver una fuente de señal externa.
❑
Editar Nombre
Puede dar un nombre al dispositivo conectado en los terminales de entrada; de esta manera será más fácil seleccionar el dispositivo de entrada.
Vídeo/DVD/CableSTB/SatéliteSTB/PVRSTB/ReceptorAV/Juego/Filmadora/
PC/DVI PC/DVI/TV/IPTV/Blu-ray/HD DVD/DMA
N
Cuando se conecta un ordenador con una resolución de 1920 x 1080 a 60 Hz al puerto HDMI IN 2(DVI), se debe configurar el modo HDMI2/DVI en PC del menú
Editar Nombre.
Lista de Entradas
Editar Nombre
AV1
AV2
Componente1
Componente2
PC
HDMI1
HDMI2/DVI
Editar Nombre
----
Vídeo
DVD
Cable STB
Satélite STB
PVR STB
Mover
▼
Ingresar Regresar
Soporte técnico
❑
Autodiagnóstico
Prueba de imagen
Si cree que tiene un problema con la imagen, efectúe la prueba de imagen. Compruebe el patrón del color en la pantalla para ver si persiste el problema.
N
•
•
¿Continúa el problema con esta prueba?
se muestra en la pantalla.
Si el patrón de prueba no aparece o si en él se produce ruido, seleccione
Sí.
Si el patrón de prueba se muestra correctamente, seleccione
No.
Sí
: Puede haber un problema en el televisor. Póngase en contacto con el Centro de llamadas de Samsung.
No
: Puede haber un problema en el equipo externo. Compruebe las conexiones. Si persiste el problema, consulte el manual del usuario del dispositivo externo.
Autodiagnóstico
Actualización del software
Guía de conexión HD
Contacto con Samsung
►
•
•
Prueba de sonido
Si cree que tiene un problema con el sonido, efectúe la prueba de sonido. Compruebe el sonido reproduciendo una melodía en el televisor.
N
N
N
Autodiagnóstico
Prueba de imagen
Prueba de sonido
►
¿Continúa el problema con esta prueba?
se muestra en la pantalla.
Si durante la prueba de sonido sólo se oye sonido de un altavoz o no se oye de ninguno, seleccione
Sí
.
Si oye sonido de los altavoces, seleccione
No
.
Intensidad señal
Mover Ingresar Regresar
Sí
: Puede haber un problema en el televisor. Póngase en contacto con el Centro de llamadas de Samsung.
No
: Puede haber un problema en el equipo externo. Compruebe las conexiones. Si persiste el problema, consulte el manual del usuario del dispositivo externo.
Si no oye sonido en los altavoces del televisor, antes de realizar la prueba de sonido, asegúrese de que
Seleccionar altavoz
esté configurado como
Altavoz de TV
en el menú de sonido.
La melodía se oirá durante la prueba aunque
Seleccionar altavoz
esté establecido como
Altavoz externo
o se haya silenciado el sonido con el botón
M
MUTE
.
BN68-02143A-00SPA.indb 34
Español - 4
Continúa…
3/5/2009 3:46:35 PM
Intensidad señal (Digital)
AA diferencia de los canales analógicos, cuya calidad de recepción puede variar desde con nieve hasta nítida, los canales digitales (HDTV) tienen una calidad de recepción nítida o no hay recepción. Por ello, a diferencia de los canales analógicos, no se puede realizar una sintonización fina de un canal digital. Se puede, no obstante, ajustar la antena para mejorar la recepción de los canales digitales disponibles.
N
Si el medidor de la intensidad de la señal indica que ésta es débil, mueva la antena para aumentar la intensidad de la señal. Siga ajustando la antena hasta que encuentre la mejor posición para recibir la señal más fuerte.
Intensidad señal
Aceptar
Ingresar Regresar
Panel lateral del TV
Unidad USB
❑
Actualización del software
Samsung puede ofrecer actualizaciones del firmware del televisor en el futuro. Consulte
Samsung.com o póngase en contacto con el centro de llamadas de Samsung en
1-800-SAMSUNG (726-7864) para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB.
N
No desconecte la alimentación ni retire la unidad USB mientras se aplican las
N
N actualizaciones. El televisor se apagará y se encenderá automáticamente después de completar la actualización del firmware.
Cuando se actualiza el software, la configuración del vídeo y audio que se haya efectuado vuelve a la configuración predeterminada (de fábrica).
Es aconsejable anotar la configuración para que después sea más fácil restaurarla tras la actualización en el modo de suspensión.
Autodiagnóstico
Actualización del software
►
Guía de conexión HD
Contacto con Samsung
Actualización del software
Explorando USB
Puede tardar hasta 30 segundos.
❑
Guía de conexión HD
Se muestra una breve explicación en
Cómo conseguir el mejor rendimiento del nuevo HDTV
.
Siga las instrucciones para obtener el mejor método de conexión de los dispositivos de alta definición.
❑
Contacto con Samsung
Puede conocer los datos del centro de llamadas, la página web y obtener información de los productos de Samsung.
N
Puede desplazarse a la página anterior o siguiente con los botones
▲ o ▼.
Guía de conexión HD
Cómo conseguir el mejor rendimiento del nuevo HDTV.
Paso 1. Conecte el receptor HD al televisor mediante el cable de video
▼ de componentes (rojo, verde, azul) y el audio (rojo, blanco).
Receptor HD
Cable HDMI
▼
Vista posterior del TV
Cable componente
Paso 2. Presione el botón Source del mando a distancia para seleccionar la entrada HDMI o de componentes.
■ Según cuál sea la ubicación, la programación de alta definición también se puede ver con una antena externa.
■ Para más detalles, consulte Conexiones HD en el menú o el manual de instrucciones.
Regresar
Contacto con Samsung
Contacte con Samsung si tiene problemas con el funcionamiento del televisor.
Contacto con Samsung :
- Centro de llamadas : 1-800-SAMSUNG (7267864)
- Sitio Web : www.samsung.com
Para obtener el último firmware para su televisor visite el sitio web de Samsung.
www.samsung.com >“Support”> “Download Center”
1/2
Aceptar
Re/Av Pág Ingresar Regresar
Español - 5
BN68-02143A-00SPA.indb 35 3/5/2009 3:46:36 PM
Media Play
Uso de la función para la Media Play
Estafunciónpermiteverarchivosdefotos(JPEG)yescuchararchivosdeaudio
(MP) guardados en un dispositivo de clase de almacenamiento masivo (MSC) USB.
Panel lateral del TV
1.
Pulse el botón
POWER
del mando a distancia o del panel frontal.
N
El televisor está encendido.
.
Conecte un dispositivo USB que contenga archivos JPEG o MP3 al terminal
USB del lateral del televisor.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Si entra en el modo Reproducción multimedia sin ningún dispositivo USB conectado, aparece el mensaje
No hay ningún dispositivo conectado
. En tal caso, inserte el dispositivo USB, salga de la pantalla pulsando el botón
MEDIA.P
del mando a
PTP (Picture Transfer Protocol -protocolo de transferencia de imágenes) se admite, pero MTP (Media Transfer Protocol -Protocolo de transferencia de medios) no se admite.
El sistema de archivos sólo admite FAT16/32 (el sistema de archivos NTFS no se admite).
Unidad USB
Algunos tipos de dispositivos de audio y cámaras digitales USB pueden no ser compatibles con este televisor.
Reproducción multimedia sólo admite dispositivos USB de clase de almacenamiento masivo (MSC). MSC es un dispositivo de clase de almacenamiento masivo sólo de transporte de gran capacidad. Ejemplos de MSC son unidades de almacenamiento en miniatura y lectores de tarjetas Flash (no se admite ni disco duro de USB ni de HUB).
Conecte directamente con el puerto USB del televisor. Si utiliza una conexión con un cable independiente, puede haber problemas de compatibilidad con el USB.
Antes de conectar el dispositivo al televisor, haga una copia de seguridad de sus archivos para evitar daños o pérdidas de datos.
SAMSUNG no se hace responsable por cualquier daño en los archivos o pérdida de datos. La resolución de imagen recomendada para Reproducción multimedia son 6 megapíxeles.
No desconecte el dispositivo USB mientras se esté cargando.
MSC admite archivos MP3 y JPEG, y el dispositivo PTP sólo admite archivos JPEG.
Se recomiendan los formatos jpeg secuencial y jpeg progresivo. El formato jpeg progresivo utiliza una gran cantidad de memoria y puede fallar la decodificación.
El formato mp3 de Reproducción multimedia sólo admite archivos de música con una frecuencia de muestreo alta (32 kHz, 44,1 kHz o 48 kHz).
La duración de la reproducción de un archivo mp3 puede visualizarse como ‘00:00:00’ si la información del tiempo de reproducción no se encuentra en el inicio del archivo.
Si la resolución horizontal de una imagen es superior a 5000, no se puede decodificar.
Si la resolución vertical de una imagen es superior a 4000, no se puede decodificar.
Cuanto mayor sea la resolución de la imagen, más tiempo tardará en visualizarse en la pantalla.
La resolución JPEG máxima admitida es 15360 x 8640 píxeles.
Con archivos dañados o que no se admiten, se muestra el mensaje Formato de archivo no admitido.
Las listas de fotos o música muestran hasta 300 carpetas o archivos.
Los archivos MP3 con DRM descargados desde un sitio de pago no se pueden reproducir.
DRM (Gestión de derechos digitales) impide los usos ilegales de recursos digitales para proteger el copyright.
❑
Uso de los botones del mando a distancia en el menú Media Play.
Botón Función
Mover el cursor y seleccionar una opción.
Seleccionar la opción marcada.
Durante una presentación o la reproducción de música:
- Pulsando el botón
ENTER
E
durante la reproducción se hace una pausa.
- Pulsando el botón
ENTER
E
durante la reproducción se reanuda ésta.
Reproducir o interrumpir el archivo de la presentación o de música.
Volver al menú anterior.
Ejecutar diversas funciones desde los menús de fotos y música.
Detener el archivo de la presentación o de música.
Avanzar o retroceder página (elemento de una lista de archivos)
Detiene la función actual y vuelve al menú principal
Media Play
.
Español -
Continúa…
BN68-02143A-00SPA.indb 36 3/5/2009 3:46:37 PM
❑
Uso del menú Media Play
1.
Pulse el botón
MENU
. Pulse los botones ▲ o ▼ para seleccionar
Aplicaciones
y, a continuación, pulse el botón
ENTER
E
.
.
Pulse los botones ▲ o ▼ para seleccionar
Media Play (USB)
y, a continuación, pulse el botón
ENTER
E
.
N
Se muestra el menú
Media Play
.
USB
Memorycard
315.0MB/495.0MB Free
E
Ingresar e
Salir
O
Pulse el botón
MEDIA.P
del mando a distancia para que se muestre el menú
Media Play
.
.
Pulse los botones ▲ o ▼ para seleccionar el dispositivo de memoria USB correspondiente y, a continuación, pulse el botón
ENTER
E
.
N
N
El menú
Media Play
al televisor.
varía según el dispositivo de memoria USB conectado
Algunos dispositivos quizás no se admitan por problemas de compatibilidad.
4.
Pulse los botones◄ o ► para seleccionar un icono (
Photo, Music, Setup
) y, a continuación, pulse el botón
ENTER
E
.
N
Para salir del modo distancia.
Media Play
pulse el botón
MEDIA.P
del mando a
Photo
Memorycard
315.0MB/495.0MB Free
Photo Music Setup
L
Mover
E
Ingresar
R
Regresar
UsodelalistadeFOTOS(JPEG)
EstemenúmuestracarpetasyarchivosJPEGguardadosenundispositivode memoria USB.
Photo
1.
Siga los pasos 1 a 2 de
Uso del menú Media Play
.
.
Pulse los botones ◄ o ► para ir a
Photo
y, a continuación, pulse el botón
ENTER
E
.
La información del archivo guardado se muestra como una carpeta o un archivo.
Memorycard
315.0MB/495.0MB Free
.
Pulse los botones ▲, ▼, ◄ y ► para seleccionar un archivo.
•
•
N
N
N
N
N
N
Photo
Pulse el botón
ENTER
E
sobre el icono de una foto para mostrar ésta en pantalla completa.
Pulse el botón
ENTER
E
sobre el icono de una carpeta para mostrar los archivos JPEG incluidos en dicha carpeta.
Para salir del modo
Media Play
pulse el botón
MEDIA.P
del mando a distancia.
El desplazamiento a una foto puede tardar unos segundos necesarios para cargar el archivo. En este momento, el icono aparecerá en la parte superior
Photo
400*340
53 KB
Ene 18, 2009
1 / 40
IMG_0550.JPG
Carpeta superior
izquierda de la pantalla.
La visualización de archivos JPEG como imágenes en miniatura tarda algún tiempo.
Este menú sólo muestra los archivos con extensión jpg. Los archivos con otro
Memorycard
315.0MB/495.0MB Free
IMG_0556_JPG
IMG_0576.JPG
Selección formato como bmp o tiff no se muestran.
Los archivos se visualizan en una página. En cada página se muestran 15 fotos en miniatura.
Las miniaturas se numeran de 1 a 15, de izquierda a derecha y de arriba a abajo.
Music
IMG_0335.JPG
IMG_0557_JPG
IMG_0577.JPG
IMG_0343.JPG
IMG_0563_JPG
IMG_0578.JPG
IMG_0344.JPG
IMG_0566_JPG
IMG_0579.JPG
▶▶
Setup
L
Mover
E
Ingresar
R
Regresar
1/3 Page
IMG_0550.JPG
IMG_0572.JPG
IMG_0580.JPG
▶▶
Mover
INFO
Opción
E
Ingresar
R
Regresar
N
N
N
N
N
N
N
N
Ciertos tipos de cámara digital USB y dispositivos de audio quizás no sean compatibles con este televisor.
En primer lugar se muestran las carpetas y, a continuación, todos los archivos JPEG de cada carpeta.
Las carpetas y los archivos MP3 se muestran ordenados por la hora en que se han guardado en el dispositivo de memoria
USB.
Las carpetas y los archivos JPEG se muestran ordenados por la hora en que se han guardado en el dispositivo de memoria
USB.
Si la foto se visualiza en pantalla completa, se puede ampliar, reducir o girar la foto en la pantalla.
Mientras se muestra una pantalla completa, los botones ◄ o ► permiten ver otra foto de la misma carpeta.
Pulse el botón cuando el icono de una fotografía esté seleccionado para iniciar una presentación.
Según la calidad y la resolución de la imagen, es posible que las fotos sin información EXIT no se muestren como imágenes en miniatura en la Lista de fotos.
Continúa…
Español -
BN68-02143A-00SPA.indb 37 3/5/2009 3:46:52 PM
❑
Visualización de una presentación
4.
Pulse el botón
INFO
para mostrar las opciones
(Ver, Iniciar presentación, Borrar, Borrar todo, Deselecc. todos)
.
5.
Pulse los botones ▲ o ▼ para seleccionar
Iniciar presentación
y, a continuación, pulse el botón
ENTER
E
.
N
En la presentación, los archivos se muestran en orden a partir del archivo que se muestra en este momento.
N
Los archivos MP3 se pueden reproducir automáticamente durante la presentación si
Música de fondo
está configurada como
Encendido
de manera predeterminada. Para que esta función sea posible, los archivos
MP3 y otros archivos de fotos deben estar en la misma carpeta del dispositivo de memoria USB.
.
Pulse el botón
INFO
durante la presentación para configurar las opciones siguientes
(Velocidad visionado automático
,
Música de fondo
,
Configuración de la música de fondo
,
Lista)
.
Pulse los botones ▲ o ▼ para seleccionar la opción y pulse el botón
ENTER
E
.
Después de configurar la opción, pulse el botón
ENTER
E
para aceptar el cambio.
❑
Uso del menú durante la presentación
Velocidad visionado automático
Seleccione el control de velocidad de la presentación.
Pulse los botones ▲ o ▼ para seleccionar una opción
(Rápido, Normal, Lento)
y, a continuación, pulse el botón
ENTER
E
.
Música de fondo
Seleccione si desea que se reproduzca un archivo MP3 durante la presentación.
Pulse los botones ▲ o ▼ para seleccionar una opción (
Encendido
,
Apagado
) y, a continuación, pulse el botón
ENTER
E
.
Configuración de la música de fondo
Mientras se realiza la presentación, se muestran los archivos MP3 y las carpetas del mismo directorio.
Seleccione una carpeta con los botones ▲ o ▼ y pulse el botón
ENTER
E
.
Pulse de nuevo el botón
ENTER
E
para volver a la pantalla de la presentación. Se reproduce la música de fondo seleccionada.
N
Si establece como
Apagado
la opción
Música de fondo
, aunque
Configuración de la música de fondo
se haya habilitado, ésta no se reproducirá.
Lista
La información del archivo se muestra como una carpeta o un archivo JPEG.
▶▶
1/3 Page ▶▶
Photo
400*340
53 KB
Ene 18, 2009
1 / 40
IMG_0550.JPG
Carpeta superior IMG_0335.JPG
IMG_0343.JPG
IMG_0344.JPG
IMG_0550.JPG
View
Iniciar visionado automático
IMG_0556.JPG
Borrar
Borrar todo
Deselecc. todos
IMG_0576.JPG
Salir
Selección
IMG_0557.JPG
IMG_05.PG
IMG_0563.JPG
IMG_0578.JPG
IMG_0566.JPG
IMG_0579.JPG
IMG_0572.JPG
IMG_0580.JPG
Mover
INFO
Opción
E
Ingresar
R
Regresar
Pausa
Velocidad visionado automático : Lento
Música de fondo : Apagado
Configuración de la música de fondo
Lista
INFO
Salir
Rápido
Nomal
Lento
Pausa
Velocidad visionado automático : Lento
Música de fondo : Encendido
Configuración de la música de fondo
Lista
INFO
Salir
Encendido
Apagado
Configuración de la música de fondo
Seleccionar archivos para música de fondo
Carpeta superior
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
◄◄ 1/2 Page ►►
Selección
U
Mover
E
Ingresar
R
Regresar
N
Para salir del modo
Media Play
, pulse el botón
MEDIA.P
del mando a distancia.
BN68-02143A-00SPA.indb 38
Español -
Continúa…
3/5/2009 3:47:03 PM
▶▶
1/3 Page ▶▶
Photo
400*340
53 KB
Ene 18, 2009
1 / 40
IMG_0550.JPG
Carpeta superior IMG_0335.JPG
IMG_0343.JPG
IMG_0344.JPG
IMG_0550.JPG
View
Iniciar visionado automático
IMG_0556.JPG
Borrar
Borrar todo
Deselecc. todos
IMG_0576.JPG
Salir
Selección
IMG_0557.JPG
IMG_05.PG
IMG_0563.JPG
IMG_0578.JPG
IMG_0566.JPG
IMG_0579.JPG
IMG_0572.JPG
IMG_0580.JPG
Mover
INFO
Opción
E
Ingresar
R
Regresar
N
Cuando se selecciona un archivo de fotos, la información de éste aparece en la parte izquierda de la pantalla del televisor, así como la resolución, la fecha de modificación y el orden del archivo en este directorio (por ejemplo, 10 de 15).
: Icono de carpeta
: Icono de foto
: Icono de desplazarse a carpeta de nivel anterior
Photo
400*340
53 KB
Ene 18, 2009
1 / 40
Memorycard
315.0MB/495.0MB
IMG_0550.JPG
Carpeta superior
IMG_0335.JPG
IMG_0343.JPG
IMG_0344.JPG
IMG_0344.JPG
IMG_0556.JPG
IMG_0557.JPG
IMG_0563.JPG
IMG_0566.JPG
IMG_0572.JPG
IMG_0576.JPG
IMG_0577.JPG
IMG_0578.JPG
IMG_0579.JPG
IMG_0580.JPG
Selección Mover
INFO
Opción
E
Ingresar
R
Regresar
Resolución
Tamaño del archivo
Fecha de modificación
Photo
▶▶
1/3 Page ▶▶
400*340
53 KB
Ene 18, 2009
1 / 40
Orden del archivo en el directorio
❑
Uso del menú de opciones
1.
Siga los pasos 1 a 2 de
Uso del menú Media Play
. (Consulte la página 37)
.
Pulse los botones ◄ o ► para ir a
Photo
y, a continuación, pulse el botón
ENTER
E
.
La información del archivo guardado se muestra como una carpeta o un archivo.
.
Pulse los botones ▲, ▼, ◄ y ► para seleccionar un archivo y, a continuación, pulse el botón
ENTER
E
. Si se pulsa el botón sobre la miniatura de una foto,
ésta se muestra en pantalla completa.
4.
Pulse el botón
INFO
para mostrar las opciones
(Iniciar presentación
,
Zoom
,
Girar
,
Lista)
.
Iniciar visionado automático
Zoom : x1
Girar
Lista
: 0º
INFO
Salir
Zoom
• Pulse los botones ◄ o ► para seleccionar
Zoom
y, a continuación, pulse el
• botón
ENTER
E
.
Con cada pulsación de los botones ▲ o ▼ se aumenta el tamaño de la foto.
(
x1
→
x
→
x4
)
•
N
-
-
x1
: Restablece una foto a su tamaño original.
x
: Aumenta dos veces la foto.
-
x4
: Aumenta cuatro veces la foto.
Para desplazarse por una foto ampliada arriba, abajo, izquierda y derecha,
Iniciar visionado automático
Zoom
Girar
Lista
: x1
: 0º
INFO Salir pulse el botón
INFO
para salir de la opción del menú y a continuación pulse los botones ▲, ▼, ◄ y ►.
Las opciones
Iniciar presentación
,
Girar
se desactivan cuando se selecciona la opción
Zoom
.
x1 x2 x4
•
•
Girar
Pulse los botones ▲ o ▼ para seleccionar Girar y pulse el botón
ENTER
E
.
Cada vez que se pulsan los botones ▲ o ▼ se gira la foto.
N
N
-
-
-
-
0º
: Para girar una imagen a su estado original
0º
: Para girar una foto 90 grados
10º
: Para girar una foto 180 grados
0º
: Para girar una foto 270 grados
El archivo girado no se guarda.
Las opciones
Iniciarpresentación,Zoom
se desactivan cuando se selecciona la opción
Girar
.
Iniciar visionado automático
Zoom : x1
Girar
Lista
: 0º
INFO Salir
0º
90º
180º
270º
•
•
Lista
Pulse los botones ◄ o ► para seleccionar
Lista
y, a continuación, pulse el botón
ENTER
E
.
Ir a la lista de fotos.
Español -
BN68-02143A-00SPA.indb 39 3/5/2009 3:47:15 PM
Uso de la lista MP
El menú muestra los archivos MP que se encuentran entre los archivos guardados en un dispositivo de memoria USB.
1.
Siga los pasos 1 a 2 de
Uso del menú Media Play
. (Consulte la página 37)
.
Pulse los botones ◄ o ► para ir a
Music
y, a continuación, pulse el botón
ENTER
E
.
La información del archivo guardado se muestra como una carpeta o un archivo.
.
Pulse los botones ▲ o ▼ para ir a un icono y, a continuación, pulse el botón
ENTER
E
.
N
N
N
Si se pulsa el botón
ENTER
E
sobre un icono de nota musical, inmediatamente se reproduce el archivo de música.
Pulse el botón
ENTER
E
sobre el icono de una carpeta para mostrar los archivos de música incluidos en dicha carpeta.
Para seleccionar un archivo en la página siguiente, pulse los botones
o para desplazarse a la página siguiente o a la anterior.
4.
Para seleccionar todos los archivos o uno solo, pulse el botón
INFO
para ver los menús de Música.
Pulse el botón
ENTER
E
para seleccionar
Reproducción, Repetir música,
Borrar, Borrar todo
o
Deselecc. todos
.
N
Para salir del modo
Media Play
, pulse el botón
MEDIA.P
del mando a distancia.
Photo
Music
Memorycard
315.0MB/495.0MB Free
Music Setup
L
Mover
E
Ingresar
R
Regresar
▶▶
1/3 Page ▶▶
Música
5.9MB
Ene 14, 2009
1/20
Reproducción ►
Repetir música : Apagado
Borrar
Borrar todo
Deselecc. todos
Salir
001 Swan Song feat.TB...
Carpeta superior
Folder 1
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
All
005 Chuk Mangione-Feel So good.mp3
006 Nat King Cole-Fly me to the moon.mp3
007 Ryuichi Sakamoto-Rain.mp3
008 Bon jovi-This ain’t a love song.mp3
00:00:00
00:04:01
00:04:28
00:04:12
00:05:39
00:04:30
00:05:25
00:04:30
00:03:54
Selección
U
Mover
INFO
Opción
E
Ingresar
R
Regresar
: Icono de carpeta
❑
Uso del menú de opciones
: Icono de la lista de música
Reproducir
Seleccione para reproducir los archivos MP3.
N
N
N
N
N
N
Para hacer una pausa en la reproducción de un archivo MP3, pulse el botón .
Pulse el botón para salir del modo de reproducción.
Este menú sólo muestra archivos con la extensión .mp3. Los archivos con otras extensiones no se muestran, aunque se hayan guardado en el mismo dispositivo USB.
: Icono de desplazarse a carpeta de nivel anterior
El archivo seleccionado se visualiza en la parte superior con su tiempo de reproducción.
Para ajustar el volumen de la música, pulse los botones
VOL
o
VOL
del mando a distancia. Para silenciar el sonido, pulse el botón
M
MUTE
del mando a distancia.
Pulse los botones o para cambiar las páginas.
Repetir música
Seleccione para reproducir repetidamente todos los archivos MP3 de la carpeta actual.
Puede seleccionar
Encendido
o
Apagado.
Icono
Icono de información de la función de la música
Función
Cuando todos los archivos de música de la carpeta (o el archivo seleccionado) se repiten.
Repetir música
está configurado como
Encendido
.
Cuando todos los archivos de música de la carpeta (o el archivo seleccionado) se reproducen una vez.
Repetir música
está configurado como
Apagado
.
Cuando se pulsa el botón
PLAY/PAUSE
del mando a distancia mientras se reproduce música.
Cuando se pulsa el botón
STOP
del mando a distancia, la música se detiene.
Español - 40
BN68-02143A-00SPA.indb 40 3/5/2009 3:47:28 PM
▶▶
1/3 Page ▶▶
Música
5.9MB
Ene 14, 2009
1/20
Reproducción ►
Repetir música : Apagado
Borrar
Borrar todo
Deselecc. todos
Salir
001 Swan Song feat.TB...
Carpeta superior
Folder 1
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
All
005 Chuk Mangione-Feel So good.mp3
006 Nat King Cole-Fly me to the moon.mp3
007 Ryuichi Sakamoto-Rain.mp3
008 Bon jovi-This ain’t a love song.mp3
00:00:00
00:04:01
00:04:28
00:04:12
00:05:39
00:04:30
00:05:25
00:04:30
00:03:54
Selección
U
Mover
INFO
Opción
E
Ingresar
R
Regresar
Uso del menú de configuración
En la pantalla de configuración se muestran los parámetros del menú Media Play
.
1.
Siga los pasos 1 a 2 de
Uso del menú Media Play
. (Consulte la página 37)
.
Pulse los botones ◄ o ► para ir a
Setup
y, a continuación, pulse el botón
ENTER
E
.
.
Pulse los botones ▲ o ▼ para seleccionar una opción y, a continuación, pulse el botón
ENTER
E
.
(
Velocidad visionado automático
,
Música de fondo
,
Configuración de la música de fondo
,
Repetir música
,
Salvapantallas, Retirar con seg
)
4.
Pulse los botones ▲ o ▼ para seleccionar una opción y, a continuación, pulse el botón
ENTER
E
.
N
Para salir del modo
Media Play
pulse el botón
MEDIA.P
del mando a distancia.
Velocidad visionado automático
Puede seleccionar la velocidad de la presentación.
Puede seleccionar
Rápido
,
Normal
o
Lento
.
Música de fondo
Se selecciona para determinar si se desea reproducir un archivo MP3 durante la presentación.
Puede establecer Música como
Encendido
o como
Apagado
.
Configuración de la música de fondo
Cuando se está realizando una presentación, se puede cambiar a
Configuración de la música de fondo
para seleccionar un archivo de música y escucharlo.
Seleccione un archivo MP3 como música de fondo.
Repetir música
Se selecciona para determinar si se desea repetir la reproducción de la música cuando se han reproducido todos los archivos MP3 de esta carpeta.
Se puede seleccionar
Encendido
o
Apagado
.
Salvapantallas
Puede configurar el tiempo de espera necesario para que se ejecute el salvapantallas.
El salvapantallas se iniciará si no pulsa ningún botón durante 10 min., 20 min. o
1hora.
Retirar con seg
Se muestra el mensaje de que el dispositivo USB ya se puede retirar del TV con seguridad.
Ahora puedequitar el dispositivo del televisor.
Setup
Setup
Setup
Photo
Memorycard
315.0MB/495.0MB Free
Música de fondo
Repetir música
Salvapantallas
Retirar con seg
Music Setup
L
Mover
E
Ingresar
R
Regresar
: Apagado
: 10 min.
U
Mover
E
Ingresar
R
Regresar
Configuración de la música de fondo
Seleccionar archivos para música de fondo
Carpeta superior
001 Swan Song feat.TBNY.mp3
002 Beatles-Yesterday.mp3
003 Fall in Love.mp3
004 Tom Waits-Time.mp3
005 Chuk Mangione-Feel So good.mp3
◄◄ 1/2 Page ►►
Selección
U
Mover
E
Ingresar
R
Regresar
Velocidad visionado automático : Lento
Música de fondo : Encendido
Configuración de la música de fondo
Repetir música
Salvapantallas
: Apagado
: 10 min.
Retirar con seg
U
Mover
E
Ingresar
R
Regresar
Velocidad visionado automático : Lento
Música de fondo : Encendido
Configuración de la música de fondo
Repetir música : Apagado
Salvapantallas
Retirar con seg 20 min.
1 hora
Setup
U
Mover
E
Ingresar
R
Regresar
Velocidad visionado automático : Normal
Música de fondo : Encendido
Configuración de la música de fondo
Repetir música
Salvapantallas
Retirar con seg
: Apagado
: 10 min.
U
Mover
E
Ingresar
R
Regresar
Español - 41
BN68-02143A-00SPA.indb 41 3/5/2009 3:47:43 PM
Anynet+
Conexión de dispositivos Anynet+
Anynet+ es una función que permite controlar todos los dispositivos Samsung conectados compatibles con Anynet+ por medio del mando a distancia del televisor Samsung.
El sistema Anynet+ se puede utilizar sólo con los dispositivos Samsung que tengan la función Anynet+. Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet+.
Para conectar al televisor
1.
Conecte los terminales HDMI IN (1, 2(DVI), o 3) del televisor y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI.
TV Dispositivo
Anynet+ 1
Dispositivo
Anynet+
Dispositivo
Anynet+
Cable HDMI 1.
Cable HDMI 1.
Cable HDMI 1.
Para conectar al sistema Home Cinema
1.
Conecte los terminales HDMI IN (1, 2(DVI), o 3) del televisor y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI.
.
Conecte el terminal HDMI IN del sistema Home Cinema y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI.
TV
Sistema Home Cinema
Dispositivo
Anynet+ 1
Cable óptico
Cable HDMI 1.
Dispositivo Anynet+ Dispositivo Anynet+
Cable HDMI 1.
Cable HDMI 1.
Cable HDMI 1.
N
N
N
N
N
N
Conecte un cable óptico entre el terminal DIGITAL AUDIO OUT (OPTICAL) del televisor y el terminal de entrada de audio digital del sistema Home Cinema.
Si se sigue la conexión anterior, la toma Optical sólo produce la salida de 2 canales de audio. Sólo oirá sonido de los altavoces frontales izquierdo y derecho y del subwoofer del sistema Home Cinema. Para escuchar el canal de audio 5.1, conecte el terminal DIGITAL AUDIO OUT (OPTICAL) del reproductor de DVD o del decodificador de satélite (dispositivo Anynet 1 o 2) directamente al amplificador o al sistema Home Cinema, no al televisor.
Conecte sólo un sistema Home Cinema.
Puede conectar un dispositivo Anynet+ mediante el cable HDMI 1.3. Algunos cables HDMI pueden no admitir las funciones
Anynet+.
Anynet+ funciona cuando el dispositivo de AV que admite Anynet+ se encuentra en estado de espera o de encendido.
Anynet+ admite hasta 12 dispositivos de AV en total. Tenga en cuenta que puede conectar hasta 3 dispositivos del mismo tipo.
Español - 4
Continúa…
BN68-02143A-00SPA.indb 42 3/5/2009 3:47:46 PM
❑
❑
Configuración de Anynet+
Los parámetros siguientes ayudan a configurar las funciones Anynet
+.
Anynet+ (HDMI-CEC)
Media Play (USB)
►
T
Pulse el botón
TOOLS
para mostrar el menú
Herramientas
.
También puede configurar Anynet
+ seleccionando
Herramientas
→
Anynet+ (HDMI-CEC)
Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como Encendido.
1.
Pulse el botón
MENU
. Pulse los botones ▲ o ▼ para seleccionar
Aplicaciones
y, a continuación, pulse el botón
ENTER
E
.
.
Pulse los botones ▲ o ▼ para seleccionar
Anynet+ (HDMI-CEC)
, y, a continuación, pulse el botón
ENTER
E
.
.
Pulse los botones ▲ o ▼ para seleccionar
Configuración
y, a continuación, pulse el botón
ENTER
E
.
4.
Pulse el botón
ENTER
E
para seleccionar
Anynet+ (HDMI-CEC)
.
5.
Pulse los botones ▲ o ▼ para seleccionar
Encendido
y, a continuación, pulse el botón
ENTER
E
.
N
N
La función
Anynet+ (HDMI-CEC)
está activada.
Si selecciona
Apagado
,
Anynet+ (HDMI-CEC)
se desactiva.
N
Cuando la función
Anynet+ (HDMI-CEC)
está desactivada, todas las operaciones relacionadas con Anynet+ se desactivan.
Lista Disp.
Configuración
Mover
Configuración
Anynet+ (HDMI - CEC) : Encendido ►
Apagado Automático : Sí
Mover
Ingresar
Ingresar
Regresar
Regresar
Configuración de un dispositivo Anynet+ para que se desactive automáticamente cuando el televisor se apaga
1.
Pulse los botones ▲ o ▼ para seleccionar
Apagado Automático
; a continuación pulse el botón
ENTER
E
.
.
Pulse los botones ▲ o ▼ para seleccionar
Sí
y, a continuación, pulse el botón
ENTER
E
.
N
N
La función
Apagado Automático
se activa.
Si selecciona
No
, la función
Apagado Automático
se cancela.
.
Pulse el botón
EXIT
para salir.
N
La fuente activa del mando a distancia del televisor se debe configurar para que éste utilice la función Anynet
+
N
Si establece
Apagado Automático
como
Sí
”, los dispositivos externos conectados también se desactivan cuando se apaga el televisor. Si un dispositivo externo todavía está grabando, puede apagarse o no.
Búsqueda y cambio de dispositivos Anynet+
1.
Pulse el botón
TOOLS
.
Pulse los botones ▲ o ▼ para seleccionar
Lista Disp.
y, a continuación, pulse el botón
ENTER
E
.
N
Se muestran todos los dispositivos Anynet+ conectados al televisor.
N
Si no encuentra el dispositivo que desea, pulse el botón rojo para buscar los dispositivos.
Ver TV
Lista Disp.
Grabando
DVDR MENU
DVDR INFO
: DVDR
Receptor : Apagado
.
Pulse los botones ▲ o ▼ para seleccionar un dispositivo determinado y pulse el botón
ENTER
E
. Se cambia al dispositivo seleccionado.
N
Sólo cuando
Anynet+ (HDMI-CEC)
se configura como
Encendido
en el menú
Aplicaciones
, aparece el menú
Lista Disp
.
N
N
N
N
N
Configuración
Mover Ingresar Regresar
El cambio a los dispositivos seleccionados puede tardar unos 2 minutos. No se puede cancelar la operación de cambio de dispositivo mientras ésta se está efectuando.
El tiempo necesario para la búsqueda de dispositivos depende de la cantidad de dispositivos conectados.
Cuando finaliza la búsqueda de dispositivos, no se muestra el número de dispositivos encontrados.
Aunque el televisor explora automáticamente los dispositivos cuando se enciende con el botón
POWER
, los dispositivos conectados cuando el televisor ya está encendido no aparecen en la lista de dispositivos. En tal caso, seleccione el menú
Buscando Conexiones para buscar los dispositivos.
Si ha seleccionado el modo de entrada externa pulsando el botón
SOURCE
, no podrá usar la función Anynet+. Asegúrese de cambiar al dispositivo Anynet+ mediante el botón
TOOLS
.
Botones del mando a distancia del televisor disponibles en el modo Anynet+
Tipo de dispositivo Estado de funcionamiento
Después de cambiar al dispositivo, cuando el menú de éste aparece en la pantalla.
Dispositivo Anynet+
Después de cambiar al dispositivo, mientras se reproduce un archivo
Botones disponibles
Botones numéricos ▲/▼/◄/►
ENTER
E botones de colores/botón
EXIT
(Búsqueda atrás) / (Búsqueda adelante)
(Detener)/ (Reproducir)/ (Pausa)
Dispositivo con sintonizador incorporado
Dispositivo de audio
Después de cambiar al dispositivo, mientras se ve un programa de TV.
Cuando el receptor está activado
Botones
CH / CH
Botones
VOL / VOL /
M
MUTE
Español - 4
Continúa...
BN68-02143A-00SPA.indb 43 3/5/2009 3:47:48 PM
N
N
N
N
N
La función Anynet+ sólo funciona cuando la fuente activa del mando a distancia del televisor está ajustada en TV.
El botón funciona sólo cuando la grabación es posible.
Los dispositivos Anynet+ no se pueden controlar con los botones del TV. Los dispositivos Anynet+ sólo se pueden controlar mediante el mando a distancia del televisor.
El mando a distancia del televisor puede no funcionar en determinadas circunstancias. En ese caso, vuelva a seleccionar el dispositivo Anynet+.
Las funciones Anynet+ no funcionan con los productos de otros fabricantes.
Las funciones , pueden variar según el dispositivo.
Menú Anynet+
El menú
Anynet+
cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor.
Menú Anynet+
Ver TV
Cambia de Anynet+ al modo de emisión de TV.
Descripción
Lista Disp.
Receptor
Configuración
Muestra la lista de dispositivos de Anynet+.
Grabando
Comienza una grabación. (Este menú sólo funciona con dispositivos que admiten grabación.)
Menú
Muestra el menú del dispositivo conectado.
Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de títulos del grabador de DVD.
Muestra el menú de control de reproducción del dispositivo conectado.
INFO
Grabación con temporizador
Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de control de reproducción del grabador de DVD.
Permite reservar una grabación. (Este menú sólo funciona en un dispositivo que admita reservas de grabación.)
Detener grabación
Detiene la grabación.
La salida de sonido se efectúa a través del receptor (sistema Home Cinema).
Se puede configurar que Anynet+ (HDMI-CEC) se apague automáticamente así como la búsqueda de las conexiones para usar Anynet+.
❑
❑
Grabando
La grabadora de Samsung permite efectuar una grabación de un programa de televisión.
1.
Pulse el botón
TOOLS
.
.
Pulse los botones ▲ o ▼ para seleccionar
Grabando
inmediatamente y pulse el botón
ENTER
E
. Comienza la grabación.
Cuando hay más de un dispositivo de grabación
Cuando hay varios dispositivos de grabación conectados, éstos se muestran en una lista. Pulse los botones ▲ o ▼ para seleccionar el dispositivo de grabación que desee y pulse el botón
ENTER
E
. Comienza la grabación.
Cuando no se muestra el dispositivo de grabación
Seleccione
Lista Disp. y pulse el botón rojo para buscar los dispositivos
Ver TV
Lista Disp.
Grabando
DVDR MENU
DVDR INFO
Receptor
Configuración
:
:
Mover
DVDR
Apagado
Ingresar Regresar
.
Pulse el botón
EXIT
para salir.
N
Si pulsa el botón se grabará lo que está viendo en ese momento. Si está viendo un vídeo desde otro dispositivo, se graba el
N vídeo de éste.
Antes de grabar, compruebe si la toma de antena está conectada correctamente al dispositivo de grabación. Para conectar correctamente una antena a un dispositivo de grabación, consulte el manual del usuario del dispositivo de grabación.
Escucha a través de un receptor (Home Cinema)
Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV.
1.
Pulse el botón
TOOLS
. Pulse los botones ▲ o ▼ para seleccionar
Receptor
.
.
Pulse los botones ◄ o ► para seleccionar
Ahora podrá escuchar el sonido a través del receptor.
.
.
Pulse el botón
EXIT
para salir.
N
Si el receptor sólo admite audio, quizás no se muestre la lista de dispositivos.
N
N
El receptor no funcionará si no se ha conectado correctamente el terminal Optical IN del receptor con el terminal Optical OUT del televisor.
Cuando el receptor (sistema Home Cinema) está activado, se puede oír la salida de sonido desde el terminal óptico del televisor. Cuando se ve la televisión a través de un DTV (aéreo), el televisor envía el sonido de 5.1 canales al receptor del
N
N
N sistema Home Cinema. Cuando la fuente es un componente digital, como un DVD, y está conectada al televisor a través de
HDMI, sólo se oye el sonido de 2 canales del receptor del sistema Home Cinema.
Cuando se usa la función
Media Play
el sonido puede no oírse adecuadamente a través del receptor.
Cuando se escucha a través del receptor, hay restricciones para el uso de los menús relativos al audio (MTS, idiomas preferidos).
Si hay una interrupción en la alimentación del televisor con la opción
Receptor
configurada en
Encendido
(por desconectar el cable de alimentación o por un fallo de corriente), puede que
Seleccionar Altavoz
esté establecido como
Altavoz externo
al volver a encender el televisor.
Español - 44
BN68-02143A-00SPA.indb 44 3/5/2009 3:47:48 PM
Solución de problemas de Anynet+
Síntoma
Anynet+ no funciona.
Deseo iniciar Anynet+.
Deseo salir de Anynet+.
En la pantalla aparece el mensaje
Conectando al dispositivo
Anynet+.
Solución
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Compruebe si el dispositivo es un dispositivo Anynet+. El sistema Anynet+ sólo admite dispositivos Anynet+.
Conecte sólo un receptor (sistema Home Cinema).
Compruebe si el cable de alimentación de Anynet+ está debidamente conectado.
Compruebe las conexiones de los cables de Vídeo/Audio/HDMI 1.3 del dispositivo
Anynet+.
Compruebe si
Anynet+ (HDMI-CEC)
está establecido como
Encendido
en el menú de configuración de Anynet+.
Compruebe si el mando a distancia del televisor está en modo TV.
Compruebe si es un mando a distancia exclusivo para Anynet+.
Anynet+ no funciona en algunas situaciones. (Búsqueda de canales, funcionamiento de
Media Play
,
Plug & Play
, etc.)
Cuando se conecta o se desconecta el cable HDMI 1.3, se han de buscar de nuevo los dispositivos o volver a apagar y encender el televisor.
Compruebe si la función Anynet+ del dispositivo Anynet+ está activada.
Compruebe si el dispositivo Anynet+ está debidamente conectado al TV y si la opción
Anynet+ (HDMI-CEC)
del menú de configuración está establecida en
Encendido
.
Pulse el botón
TV
d el mando a distancia del televisor para cambiar a TV. A continuación pulse el botón
TOOLS
para visualizar el menú Anynet+ y seleccionar el menú que desee.
Seleccione Ver TV en el menú de Anynet+.
Pulse el botón
SOURCE
del mando a distancia del televisor y seleccione un dispositivo que no sea Anynet+.
Pulse
CH, CH LIST, PRE-CH
y
FAV.CH
para cambiar al modo TV.
(Tenga en cuenta que el botón de canal sólo funciona cuando no hay ningún dispositivo
Anynet+ con sintonizador incorporado conectado.)
El mando a distancia no se puede utilizar cuando se está configurando Anynet
+ o cambiando a un modo de visualización.
Utilice el mando a distancia cuando haya terminado la configuración de Anynet
+ o el cambio al modo de visualización.
No se puede usar la función de reproducción mientras se efectúa una conexión Plug & Play.
El dispositivo Anynet+ no funciona.
El dispositivo conectado no se visualiza.
•
•
•
•
•
•
Compruebe si el dispositivo admite las funciones Anynet+.
Compruebe si el cable HDMI 1.3 está debidamente conectado.
Compruebe si
Anynet+ (HDMI-CEC)
está establecido como
Encendido
en el menú de configuración de Anynet+.
Vuelva a efectuar una búsqueda de dispositivos Anynet+.
Sólo puede conectar un dispositivo Anynet+ mediante el cable HDMI 1.3. Algunos cables
HDMI pueden no admitir las funciones Anynet+.
Si se ha interrumpido por una situación anormal como la desconexión del cable HDMI o el de alimentación o por un fallo en la corriente eléctrica, deberá repetir la búsqueda del dispositivo.
Compruebe la conexión de la toma de antena del dispositivo de grabación.
El programa de televisión no se puede grabar.
El sonido del televisor no sale a través del receptor.
Conecte el cable óptico entre el televisor y el receptor.
Español - 45
BN68-02143A-00SPA.indb 45 3/5/2009 3:47:49 PM
Apéndice
Resolución de problemas
Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones.
Si ninguno de los consejos funciona, póngase en contacto con el centro de atención al cliente de Samsung o llame al
1-00-SAMSUNG.
Problema Posible solución
Mala calidad de imagen.
Calidad de sonido deficiente.
No hay imagen ni sonido.
Aunque el subtítulo del televisor muestre HD (Alta definición), la calidad visual no es satisfactoria.
Aparece una imagen distorsionada en la esquina de la pantalla.
Intente sintonizar otro canal.
Ajuste la antena.
Compruebe todas las conexiones de cable.
Intente sintonizar otro canal.
Ajuste la antena.
Intente sintonizar otro canal.
Pulse el botón
SOURCE
.
Compruebe que el televisor esté enchufado.
Compruebe las conexiones de la antena.
Compruebe que el botón
M
MUTE
esté desactivado.
Primero, compruebe el volumen de los aparatos conectados al TV (por ejemplo, un receptor digital, DVD, receptor de cable, reproductor de vídeo, etc.). A continuación, ajuste el volumen del TV según sea más conveniente.
Compruebe todas las conexiones.
No se percibe ningún sonido, o muy bajo, con el volumen al máximo.
Las imágenes de desplazan verticalmente.
El TV funciona de forma irregular.
Desenchufe el TV durante 30 segundos e inténtelo de nuevo.
El televisor no se enciende
Compruebe si la toma de pared funciona.
El mando a distancia funciona mal
Sustituya las pilas del mando a distancia.
Limpie el borde superior del mando a distancia (ventana de transmisión).
Compruebe los terminales de las pilas.
Pulse el botón
TV
del mando a distancia para ponerlo en el modo TV.
Asegúrese de que el mando a distancia tenga pilas.
Compruebe que los polos “+” y “-” de las pilas estén correctamente colocados.
Compruebe la potencia de la señal digital y la antena de entrada.
Problema en pantalla con la emisión digital.
La imagen es demasiado clara o demasiado oscura.
La imagen es demasiado grande o demasiado pequeña.
La calidad visual de los canales digitales puede variar.
Ajuste el brillo y el contraste.
Realice una sintonización fina.
Ajuste los parámetros de tamaño.
La calidad visual de los canales digitales puede variar según el método original de producción
(analógico o digital).
- Si el método de producción original es digital: Calidad visual alta.
- Si el método de producción original es analógico: El programa digital mostrado en la pantalla es originalmente un programa analógico que se ha convertido a digital.
La calidad visual es de grado SD (definición estándar).
La pantalla está en blanco y el indicador de encendido parpadea constantemente.
En el ordenador, compruebe los cables de señal y de alimentación.
El televisor está usando su sistema de gestión de energía.
Mueva el ratón del ordenador o pulse cualquier tecla.
En el equipo, compruebe (STB, DVD, etc.); el cable de señal y el de alimentación.
El televisor está usando su sistema de gestión de energía.
Pulse el botón
SOURCE
del mando a distancia o del panel.
Encienda y apague el televisor.
El subtítulo HD (Alta definición) que aparece al cambiar de canal o al pulsar el botón INFO del mando a distancia significa que el canal seleccionado es un canal digital. Si la emisora convierte una señal analógica en digital y la transmite, es posible que la calidad visual no sea perfecta.
Si la función
Ajustar a pantalla
está seleccionada en varios dispositivos externos, puede aparecer una imagen distorsionada en la esquina de la pantalla. Este síntoma se origina en los dispositivos externos, no en el televisor.
Se oye un ruido extraño.
La causa es un menor funcionamiento del sistema y no se trata de ningún defecto.
Hay píxeles visibles en la pantalla.
Puede que existan unos cuantos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del aparato.
Se muestra el mensaje “Resets all settings to the default values”
(“Restablece todos los valores predeterminados”).
Aparece cuando el botón
EXIT
se mantiene pulsado durante unos momentos. La configuración del producto se reinicia con los valores predeterminados.
Español - 4
BN68-02143A-00SPA.indb 46 3/5/2009 3:47:49 PM
Preparación antes de instalar el montaje mural
Caso A.
Instalación del montaje mural SAMSUNG
Caso B.
Instalación del montaje mural de otra empresa
1.
Instale el montaje mural con un par de apriete de 15 kgf cm o menos. Tenga en cuenta que las piezas se pueden dañar si el par de apriete es diferente del especificado.
.
El juego de accesorios incluye soporte y anilla
N
Se ha de fijar en el orificio [
①
[
②
] para la instalación en un montaje mural de otra empresa. (Caso B)
] cuando instale el montaje mural en la pared.
Cómo montar el soporte base
Utilizando los tornillos para asegurar el soporte y el televisor, fije firmemente éste al soporte.
(Es posible que el exterior del equipo sea diferente del que se muestra en la imagen.)
Cuando instale el televisor en una pared, fije la tapa (
➊
) al soporte con dos tornillos.
(PN50B540S3F) (PN58B540S3F)
Advertencia
Sujete firmemente el soporte al televisor antes de moverlo, ya que el soporte puede caer y causar lesiones graves.
N
El televisor lo deben transportar dos o más personas. Nunca deje el televisor en el suelo ya que la pantalla puede sufrir daños. Almacene siempre el televisor en su posición vertical.
Uso del soporte
N
N
La PDP la deben transportar dos o más personas. Nunca deje la PDP en el suelo ya que la pantalla puede sufrir daños. Mantenga siempre la PDP en posición vertical.
La PDP se puede girar 20 grados a derecha e izquierda.
Español - 4
BN68-02143A-00SPA.indb 47
-0° ~ 0°
3/5/2009 3:47:54 PM
경고
경고
주의
Fijación del televisor a la pared
Precaución
Tirar del televisor, empujarlo o colgarse de él puede provocar su caída. En especial, procure que los niños no se
주의 la muerte. Siga las precauciones de seguridad del folleto de seguridad incluido con el producto. Para mejorar la estabilidad instale un dispositivo antivuelco, como se explica a continuación.
Componentes
Soporte del TV /
Tornillo
1
(M4X 16)
Para prevenir la caída del televisor
1.
Asegure el soporte del televisor apretando los tornillos
1
(M4X 16) en los orifi cios del centro del televisor.
N
N
42˝, 50˝ : Desatornillar el tornillo que se encuentra en la parte posterior de su televisor antes de colocar el Soporte para TV.
Utilice solo los tornillos suministrados.
4", 50" 5", "
.
Apriete fi rmemente los tornillos en la pared o el mueble donde se instala el televisor. Asegure el soporte al televisor y a los tornillos de la pared o el mueble.
N
N
Debe adquirir por separado los tornillos que usará en la pared o el mueble.
Instale el televisor cerca de la pared para evitar que caiga hacia a atrás.
N
N
N
Cuando instale el televisor en la pared, asegure el cable nivelado respecto al suelo o inclinado hacia adelante por motivos de seguridad.
Compruebe regularmente que el cable no se afl oje.
Cuando desee mover el televisor, debe quitar, primero, el cable de conexión.
4", 50"
Pared
5", "
Pared
.
Compruebe que todas las conexiones estén bien aseguradas. Compruébelas periódicamente para detectar cualquier signo de fatiga o de fallo. Si tiene dudas sobre la seguridad de la instalación, póngase en contacto con un instalador profesional.
Español - 4
BN68-02143A-00SPA.indb 48 3/5/2009 3:48:00 PM
Especificaciones del equipo de montaje en la pared (VESA)
Instale el montaje mural en una pared sólida, perpendicular al suelo.
Para colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano.
Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales.
Familia de producto Pulgadas
19" ~22"
23"~29"
30"~40"
Especificaciones VESA
(A * B)
100 * 100
200 * 100
200 * 200
Tornillo estándar
M4
M6
Cantidad
LCD-TV 4
46"~55"
57"~70"
80" ~
42"~ 50"
400 * 400
800 * 400
1400 * 800
400 * 400
M8
58"~ 63" 600 * 400
PDP-TV M8 4
70" ~ 800 * 400
80" ~ 1400 * 800
N
N
N
N
N
N
N
N
Las dimensiones estándar de los equipos de montaje mural se muestran en la tabla.
Al adquirir el equipo de montaje mural, se proporciona un manual de instalación detallado y todas las piezas necesarias para el montaje.
No use tornillos con un tamaño superior al estándar, ya que pueden causar daños en el interior del televisor.
Para montajes murales que no cumplen las especificaciones de tornillos estándar VESA, la longitud de éstos puede variar dependiendo de las especificaciones.
No use tornillos que no cumplan las especificaciones de tornillos estándar VESA.
No apriete excesivamente los tornillos, ya que podría dañar el producto o provocar la caída de éste con riesgo de causar lesiones personales. Samsung no se hace responsable de este tipo de accidentes.
Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje mural que no es VESA o que no cumple las especificaciones, o si el cliente no sigue las instrucciones de instalación del producto.
Nuestros modelos de 57” y 63” no son compatibles con las especificaciones VESA. Por ello, debe usar un equipo de montaje mural exclusivo para este modelo.
No supere los 15 grados de inclinación cuando monte este televisor.
No instale el equipo de montaje mural mientras el televisor está encendido.
Se podría producir una descarga eléctrica con riesgo de causar lesiones personales.
Español - 4
BN68-02143A-00SPA.indb 49 3/5/2009 3:48:01 PM
Especificaciones
Nombre del modelo
Tamaño de pantalla (diagonal)
Resolución de PC
Sonido (salida)
Dimensiones (An. x Al. x Pr.)
Cuerpo principal
Con el soporte
PN50B540SF
50 pulgadas (49,9 pulgadas medidas diagonalmente)
1920 x 1080 a 60 Hz
10 W x 2
PN5B540SF
58 pulgadas (58 pulgadas medidas diagonalmente)
1920 x 1080 a 60 Hz
15 W x 2
48.4 x 30.3 x 2.8 pulgadas
(1230.3 x 769.8 x 73 mm)
48.4 x 32.3 x 11.4 pulgadas
(1230.3 x 821.5 x 290 mm)
55.4 x 34.2 x 2.8 pulgadas
(1407.7 x 870 x 73 mm)
55.4 x 36.4 x 13.1 pulgadas
(1407.7 x 927 x 335 mm)
Peso
Cuerpo principal
Con el soporte
Consideraciones medioambientales
Temperatura de funcionamiento
Humedad de funcionamiento
Temperatura de almacenamiento
Humedad de almacenamiento
72.3 lbs (32.8 kg)
83.5 lbs (37.9 kg)
Entre 50 °F y 104 °F (10 °C y 40 °C)
10% al 80%, sin condensación
Entre -4 °F y 113 °F (-20 °C y 45 °C)
5% al 95%, sin condensación
84.8 lbs (38.5 kg)
100.3 lbs (45.5 kg)
Entre 50 °F y 104 °F (10 °C y 40 °C)
10% al 80%, sin condensación
Entre -4 °F y 113 °F (-20 °C y 45 °C)
5% al 95%, sin condensación
N
N
N
Este dispositivo es un aparato digital de la Clase B.
El diseño y las especificaciones pueden cambiar sin previo aviso.
Para conocer la fuente de alimentación y el consumo de energía, consulte la etiqueta adherida al producto.
BN68-02143A-00SPA.indb 50
Español - 50
3/5/2009 3:48:01 PM
Dimensiones (PN50B540SF)
TOP VIEW
JACKPANELDETAIL7.2x3.7inches
FRONT VIEW
BN68-02143A-00SPA.indb 51
SIDE VIEW
Español - 51
REAR VIEW
NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc.
3/5/2009 3:48:03 PM
Dimensiones (PN5B540SF)
TOP VIEW
JACKPANELDETAIL7.2x3.7inches
FRONT VIEW
BN68-02143A-00SPA.indb 52
SIDE VIEW
Español - 5
REAR VIEW
NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc.
3/5/2009 3:48:04 PM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project