Samsung Series 6 610 LN40C610 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG(726-7864)
www.samsung.com
U.S.A
1-800-SAMSUNG(726-7864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
Serial No.
BN68-02972A-01
BN68-02972A_Eng_cover.indd 1
2010-04-15 �� 9:25:40
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
✎✎ See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
ubject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
S
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
he above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original
T
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and
from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product.
xcluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
E
exchanges or replacements, accessories, options, upgrades, or consumables.
or the location of a SAMSUNG Authorized Service Center, please call toll-free:
F
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image
quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout
process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
2
English
BN68-02972A_Eng.indb 2
2010-04-14 �� 4:44:46
Contents
Getting Started
Advanced Features
yy
yy
yy
yy
yy
yy
yy
yy Network Connection................................................ 24
List of Features.......................................................... 4
Accessories............................................................... 4
Installing the LCD TV Stand (40 ~ 55 inch TVs).......... 4
Viewing the Control Panel.......................................... 5
Viewing the Remote Control...................................... 6
Connecting to an Antenna......................................... 7
Plug & Play (Initial Setup). .......................................... 7
Connections
yy
yy
yy
yy
Connecting to an AV Device...................................... 8
Connecting to an Audio Device. ................................ 9
Connecting to a PC................................................... 9
Changing the Input source. ..................................... 10
Connecting to a Wired Network
Connecting to a Wireless Network
24
26
yy Media Play............................................................... 31
Connecting a USB Device
Connecting to the PC through network
Screen Display
Playing Multiple Files Media Play - Additional Functions
31
31
33
36
36
yy Anynet+ .................................................................. 38
Setting Up Anynet+ Switching between Anynet+ Devices Recording Listening through a Receiver Troubleshooting for Anynet+
39
39
39
40
40
yy AllShare................................................................... 41
Basic Features
About AllShare
Setting Up AllShare yy How to Navigate Menus.......................................... 11
yy Channel Menu......................................................... 11
Seeing Channels
Using Favorite Channels
Memorizing channels
Editing channels
Other Features
11
12
12
12
12
yy Picture Menu........................................................... 13
P
13
14
14
14
15
CH LIST
yy Sound Menu............................................................ 17
Changing the Preset Sound Mode
Adjusting sound settings
SLEEPSystems, Etc. P.MODE
Sound
P.SIZE
Other Information
yy
yy
yy
yy
yy
yy
Assembling the Cables............................................ 43
Anti-theft Kensington Lock. ..................................... 43
Installing the Wall Mount.......................................... 43
Securing the TV to the Wall...................................... 45
Troubleshooting....................................................... 46
Specifications.......................................................... 49
License
50
yy Dimensions. ............................................................ 51
yy Index....................................................................... 52
English
Changing the Preset Picture Mode
Adjusting
POWER picture settings
Economical Solutions INFO
Setting up the TV with your PC
Changing the Picture Options
41
41
17
17
17
yy Setup Menu............................................................. 18
Setting the Time
Using the Sleep Timer
Setting the On/Off Timer
MTS
Locking
FAV.CH Programs
Other Features
Picture In Picture (PIP)
18
18
18
19
20
22
yy Support Menu......................................................... 22
S.MODE
CC
MEDIA.P
Check the Symbol!
TOOLS
t
D
This function can be used by pressing the
TOOLS button on the remote control.
✎
Note :
Important information
O
Step by step guide :
Informs you how to access
the menu.
English
BN68-02972A_Eng.indb 3
3
2010-04-14 �� 4:44:47
Getting Started
List of Features
yy Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
yy Media Play: Allows you to play music files, pictures, and movies saved on a USB or your PC. (P. 31)
yy AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network. (P. 41)
yy Self Diagnosis: You can check picture and sound operation. (P. 22)
Accessories
✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎✎The items' colors and shapes may vary depending on the models.
yy Remote Control (BN59-01041A) & Batteries (AAA x 2)
yy Owner’s Instructions
yy Warranty Card / Safety Guide / Quick Setup Guide
yy Cleaning Cloth (BN63-01798B)
yy Power Cord
(M8 X 19 : 46 ~ 60 inch TVs)
(M6 X 16 : 40 inch TV)
yy Blanking Bracket
(BN63-06339A)
(46 ~ 60 inch TVs)
yy TV-Holder & Screw
(M8: BN96-10788B / M6: BN96-10788C)
yy Cable Tie
(BN61-05596A)
yy Holder-Ring (4ea)
(BN61-04529A )
Installing the LCD TV Stand (40 ~ 55 inch TVs)
Components
When installing the stand, use the provided components and parts.
A
B
C
or
1 EA
9EA (M4 X L12)
1 EA
Stand
Guide Stand
Screws
2
1
Top View
B
C
4EA
A
Front
Rear
4
C
1EA
English
BN68-02972A_Eng.indb 4
2010-04-14 �� 4:44:48
01 Getting Started
3
4
C
Bottom View
4EA
✎✎Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
✎✎Make sure that at least two persons lift and move the LCD TV.
✎✎Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
Viewing the Control Panel
✎✎The product color and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
P (Power)
Turns the TV on or off.
Remote control sensor
SOURCEE
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
Adjusts the volume. In the OSD, use the y buttons as you would use the
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
MENU
y
z
Power Indicator
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
BN68-02972A_Eng.indb 5
5
2010-04-14 �� 4:44:49
Getting Started
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,
Volume buttons.
Turns the remote control light on and off.
When on, the buttons become illuminated for a
moment when pressed.
(Using the remote control with this button set to
off will reduce the battery usage time.)
Turns the TV on and off.
Displays and selects the available video
sources. (P. 10)
Press to directly access channels.
Returns to the previous channel.
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ‘54-3’, press
‘54’, then press ‘-’ and ‘3’.
Adjusts the volume.
PRE-CH
VOL
CH
CH LIST
Displays the channel list on the screen. (P. 11)
Views Media Play. (P. 31)
Quickly select frequently used functions.
Cuts off the sound temporarily.
MUTE
Displays the main on-screen menu.
MENU
MEDIA.P
FAV.CH
TOOLS
INFO
isplays Favorite Channel Lists on the screen.
D
(P. 12)
Press to display information on the TV screen.
(P. 18)
Selects the on-screen menu items and
changes the values seen on the menu.
EXIT
RETURN
Returns to the previous menu.
Changes channels.
A
B
C
D
S.MODE
SLEEP
MTS
P.MODE
P.SIZE
CC
Use these buttons in Media Play and
Anynet+ modes.
(�: controls recording on Samsung
recorders with the Anynet+ feature)
Exits the menu.
Buttons used in the Channel list, Media Play
menu, etc.
S.MODE: Selects the sound mode. (P. 17)
SLEEP: Automatically shuts off the TV at a
preset time. (P. 18)
MTS: Press to choose stereo, mono or Separate
Audio Program (SAP broadcast). (P. 17)
P.MODE: Selects picture mode. (P. 13)
P.SIZE: Choose the picture size. (P. 16)
CC: Controls the caption decoder. (P. 20)
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
xx The color and shape may vary depending on the model.
6
English
BN68-02972A_Eng.indb 6
2010-04-14 �� 4:44:49
01 Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Connecting the mains and antenna.
VHF/UHF Antenna
Cable
or
Power Input
ANT OUT
PR
R-AUDIO-L
PB
Y
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the red button.
1
2
Selecting a language
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
7
Viewing the HD
Connection Guide
Enjoy your TV.
Press the ▲ or ▼ button, then press the ENTERE button.
POWER
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
yy Select the Home Use mode. Store Demo Mode is for retail
environments.
yy To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
P
INF
✎✎In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 12)
SLEEP
P.MO
✎✎Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎✎If you select the Auto, set the daylight saving time.
Select the time zone which you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
FAV.CH
MT
S.MODE
CC
If You Want to Reset This Feature...
Setup
OO MENUm → Setup → Plug & Play → ENTERE
Plug & Play
Time
Menu Language
: English
Caption
: On
Security
Network
General
PIP
: Off
TOOLS
English
BN68-02972A_Eng.indb 7
7
2010-04-14 �� 4:44:51
D
Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
W
Y
W
R
W
R
B
BD/DVD player/
HD cable/Sat. box
G
Red White
Device
HDMI OUT
DVI OUT
R-AUDIO-L
PR
R-AUDIO-L
PB
PR
PB
Y
AUDIO OUT
Y
PR
R-AUDIO-L
PB
Y
✎✎HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI
to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
xx If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting an
HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal color).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request
an upgrade.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
✎✎When connecting to AV IN 1, the
Y
W
R
W
R
R
color of the AV IN 1 [Y/VIDEO] jack
(Green) does not match the color of
the video cable (Yellow).
G
B
✎✎For better picture quality, the
W
R
W
R
Y
R-AUDIO-L
R
AUDIO OUT
B
VIDEO OUT
G
VCR
Component connection is
recommended over the A/V
connection.
Blu-ray player
AUDIO OUT COMPONENT OUT
PRR-AUDIO-L
PB
R-AUDIO-L
Y
PR
PR PB
PB Y
W
Y
W
R
W
R
R-AUDIO-L
English
BN68-02972A_Eng.indb 8
PR
PB
G
Y
Yellow Red White Red
8
B
Blue Green
Y
2010-04-14 �� 4:44:53
02 Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
AUDIO IN
DVD
Home Theater
PR
R-AUDIO-L
PB
Y
Digital audio system
W
Y
W
R
W
R
G
B
OPTICAL
Red White
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
R-AUDIO-L
PR
PB
Y
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
✎✎AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.
xx When connecting, use the appropriate connector (sold separately).
xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
AUDIO OUT
PR
R-AUDIO-L
R-AUDIO-L
PB
DVI OUT
PC OUT
AUDIO OUT
Y
PR
PB
Y
R-AUDIO-L
R-AUDIO-L
PR PR
PB PB
Y Y
English
BN68-02972A_Eng.indb 9
9
2010-04-14 �� 4:44:55
Connections
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920X1080@60Hz.
Mode
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
45.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
74.250
85.500
106.500
136.750
146.250
89.040
128.943
148.500
+/-/+
-/-/-/-/+
-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
+/+
-/+
-/+
-/+
-/+
-/+/+
640 x 350
720 x 400
640 x 480
MAC
832 x 624
1152 x 870
720 x 576
1152 x 864
VESA CVT
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
VESA DMT
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1280 x 720
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
VESA GTF
1280 x 1024
VESA DMT / DTV CEA 1920 x 1080p
IBM
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
EX-LINK
POWER
P
INFO
Connector for service only.
CH LIST
Input Cables (Sold Separately)
HDMI
SLEEP
HDMI-DVI
P.MODE
Changing the Input source
Component
P.SIZE
Coaxial (RF)
VGA
■■ TV / AV1 / AV2 / Component1 / Component2 / PC /
HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
✎✎ You can only choose external devices that
Source List
OO MENUm → Input → Source List → ENTERE
FAV.CH
Composite (AV)
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
are connected to the TV. In the Source List,
connected inputs will be highlighted.
✎✎ PC always stay activated.
MTS
10
English
S.MODE
BN68-02972A_Eng.indb 10
CC
MEDIA.P
2010-04-14 �� 4:44:56
OO MENUm → Input → Edit Name → ENTERE
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices /
TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection
easier.
✎✎ When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to
DVI PC mode under Edit Name.
03 Basic Features
Edit Name
✎✎ When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode
under Edit Name.
Basic Features
PRE-CH
MUTE
How to Navigate Menus
Channel Menu
Before using the TV, follow
the stepsCHbelow to learn how to
VOL
navigate the menu and select and adjust different functions.
CH LIST
1
MENU
MEDIA.P
FAV.CH
TOOLS
INFO
Channel List
OO MENUm → Channel → Channel List → ENTERE
POWERAdd, delete or set Favorite channels and use
2
3
EXIT
RETURN
A
B
S.MODE
C
SLEEP
4
D
P
INFObroadcasts.
the program guide for digital
Select a channel in the All Channels, Added
Channels, Favorite or Programmed
screen by pressing the ▲ / ▼ buttons, and
pressing the ENTERE button. Then you
can watch the selected channel.
MTS
1 MENU button: Displays the main on-screen menu.
P.MODE
P.SIZE
CC
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
SLEEP
The access step may differ depending on the selected menu.
MENU m
2
3
4
5
▲/▼
6
7
ENTER E
ENTER E
▲/▼
◄/►
EXIT e
Added Channels
2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
1
¦¦ Seeing Channels
6
6-1 7
8
9
9-1
10
10-1
11-1
CH LIST
Air
♥ TV #6
Air
Air
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
P.MODE
P.SIZE
The main menu options appear on
the screen:
A Antenna B Zoom C Select
Air
Page T Tools
Picture, Sound, Channel, Setup,
Input, Application, Support.
■■
All Channels: Shows all currently available
channels.
Select an icon with the ▲ or ▼
button.
MTSShows all added channels.
Added Channels:
FAV.CH ■■
Press ENTERE to access the
■■ * Favorite: Shows all favorite channels.
sub-menu.
■■
Programmed: Shows all currently reserved
Select the desired submenu with
programs.
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
S.MODE
CC
MEDIA.P
Press ENTERE to confirm the
selection.
Press EXIT.
English
TOOLS
BN68-02972A_Eng.indb 11
11
D
2010-04-14 �� 4:44:57
Basic Features
✎✎Using the color buttons with the Channel List
xx
xx
A
A
xx
B
A
B
C
D
Red
(Antenna):
Switches to Air or Cable.
B Green
C
D (Zoom): Enlarges or shrinks a channel
number.
C Yellow
D
(Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
c mark appears to the left of the selected channels.
xx (Page): Move to next or previous page. POWER
xx T (Tools): Displays the Channel List option menu.
P
(The Options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons
c
*
)
OO MENUm → Channel → Channel List → ENTERE
* Add to Favorite / Delete from Favorite t
Set channels you watch frequently as
Favorites.
1. Select a channel and press the TOOLS
button.
FAV.CH
Added Channels
Air
Air
♥ TV #6
A
Antenna
Air
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
B
Zoom
C
Auto Program
CH LIST
■■ Air: Air antenna signal.
xx After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
How to Stop Auto Programming
1. Press the ENTERE button.
2. A message willMTS
ask Stop Auto Program? Select Yes by
pressing the ◄ or ► button.
¦¦ Editing channels
S.MODE
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Select
cable system. STD, HRC and IRC identify various
types of cable TV systems. Contact your local cable
P.MODE
company to
identify the type of cableP.SIZE
system that
exists in your particular area. At this point, the signal
source has been selected.
3. Press the ENTERE button.
2. Add or delete a channel using the Add to
Favorite or Delete from Favorite menu
respectively.
8
9
9-1
10
10-1
11-1
INFO
xx When selecting the Cable TV system: Selects the
¦¦ Using Favorite Channels
Air
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
✎✎NOTE
SLEEP
7
Antenna (Air / Cable) t
■■ Auto: Air and Cable antenna.
A program currently being broadcast.
6
6-1 OO MENUm → Channel → ENTERE
■■ Cable: Cable antenna signal.
Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
(
¦¦ Memorizing channels
TOOLS
Page T Tools
OO MENUm → Channel → Channel List → ENTERE
CC
MEDIA.P
Channel Name Edit t
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
■■ Channel Name Edit (analog channels only): Assign your
own channel name.
D
¦¦ Other Features
OO MENUm → Channel → ENTERE
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
12
English
BN68-02972A_Eng.indb 12
2010-04-14 �� 4:44:58
1. Press the ENTERE button to select Stop.
2. Press the ◄ button to select Yes.
3. Press the ENTERE button.
✎✎This function is only available in Cable mode.
Channel List
OO MENUm → Channel → Channel List → ENTERE
Channel List Option Menu t
Set each channel using the Channel List menu options (Add/
Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved to
watch.
1. Press the ENTERE button to select Channel List.
2. Press the ◄ and ▼ button move to the Programmed
menu.
■■ Change Info: Change a show you have reserved to
watch.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
2. Select a function and change its settings.
■■ Select All / Deselect All: You can select or deselect all
channels in the channel list.
■■ Add / Delete: Delete or add a channel to display the
channels you want.
Fine Tune
✎✎ NOTE
xx All deleted channels will be shown on the All
Channels menu.
xx A gray-colored channel indicates the channel
has been deleted.
xx The Add menu only appears for deleted
channels.
xx Delete a channel from the Added Channels or
Favorite menu in the same manner.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the intended time. Set the
current time first to use this function. (P. 18)
1. Press the ◄ / ► /▲ / ▼ buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
✎✎ If you selected Once, Every Week or Every Day
in Repeat, you can enter the date you want.
4. Select OK, then press the ENTERE button when done.
✎✎ NOTE
xx Only memorized channels can be reserved.
xx Reserved programs will be displayed in the
Programmed menu.
xx When a digital channel is selected, press the
► button to view the digital program.
■■ Select All: Select all the channels in the channel list.
■■ Deselect All: Deselect all the selected channels.
✎✎ You can only select Deselect All when one or
03 Basic Features
How to Stop Searching Scrambled Channels
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.
yy Select Fine Tune in the Channel menu.
✎✎Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
POWER select Reset.
✎✎To reset the fine-tuning,
P
INFO
Picture Menu
CH LI
¦¦ Changing the Preset Picture Mode
OO MENUm → Picture → Mode → ENTERE
Mode t
Select your preferred picture type by pressing
the P.MODE button.SLEEP
P.MODE
■■ Dynamic: Suitable for a bright room.
P.S
■■ Standard: Suitable for a normal
environment.
■■ Natural : Suitable for an eye comfortable display.
✎✎ Natural is not available in PC mode.
■■ Movie: Suitable for watching movies in a dark room.
FAV.CH
MTS
more channels are selected.
English
S.MODE
BN68-02972A_Eng.indb 13
13
CC
2010-04-14 �� 4:44:59
MED
Basic Features
¦¦ Adjusting picture settings
¦¦ Setting up the TV with your PC
OO MENUm → Picture → Backlight → ENTERE
Set the input source to PC.
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
Auto Adjustment t
OO MENUm → Picture → Auto Adjustment →
ENTERE
Adjust frequency values/positions and fine tune the settings
automatically.
xx When you make changes to Backlight, Contrast,
✎✎Not available when connecting through HDMI/DVI
xx In PC mode, you can only make changes to
Screen
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
xx Lowering picture brightness reduces power
consumption.
¦¦ Economical Solutions
ECO Solution
OO MENUm → Picture → ECO Solution → ENTERE
■■ Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjust the brightness of the TV in order
to reduce power consumption. If you select Picture
Off, the screen is turned off , but the sound remains on.
Press any button to turn on the screen again.
■■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎✎ If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎✎ If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
■■ No Signal Power Off (Off / 15 min. / 30 min. /
60 min.)
Sets how quickly the TV switches to standby mode, if no
picture is being received.
cable.
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
■■ Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution)
[Optimum: 1920 X 1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
✎✎ Disabled when the PC is in power saving mode.
14
English
BN68-02972A_Eng.indb 14
2010-04-14 �� 4:44:59
■■ 10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
Advanced Settings
✎✎ Available when the picture mode is set to Movie
OO MENUm → Picture → Advanced Settings →
✎✎ Some external devices may not support this
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
ENTERE
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
Expert Pattern
: Off
RGB Only Mode
: Off
Color Space
►
: Native
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
and when the external input is set to all input.
function.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
■■ xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎✎ Some external devices may not support this
function.
■■ Dynamic Contrast (Off / Low / Medium / High):
Adjust the screen contrast.
Picture Options
■■ Shadow Detail: Increase the brightness of dark images.
OO MENUm → Picture → Picture Options →
✎✎ Disabled under PC mode.
■■ Gamma: Adjust the primary color intensity.
■■ Expert Pattern (Off / Pattern 1 / Pattern 2): By
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎✎ While the Expert Pattern is running, sound is not
output.
✎✎ Only enabled on DTV / Component / HDMI.
■■ RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
■■ Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
■■ White Balance: Adjust the color temperature for a more
natural picture.
ENTERE
✎✎In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
Picture Options
Color Tone
: Normal
Size
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
Auto Motion Plus : Standard
►
▼
U Move E Enter R Return
■■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
English
BN68-02972A_Eng.indb 15
03 Basic Features
¦¦ Changing the Picture Options
15
2010-04-14 �� 4:44:59
P
Basic Features
SLEEP
FAV.CH
■■ Size: Your cable box/satellite receiver
P.MODE
may have its own set
of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
P.SIZE
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
MTSbasic (4:3) mode.
4:3: Sets the picture to
✎✎ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
S.MODE ✎✎NOTE
CC
MEDIA.P
xx After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTERE button.
TOOLS
D
5. Press the ► button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
xx After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
■■ Digital Noise filter (Off / Low / Medium / High / Auto /
Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
filter feature to reduce any static and ghosting that may
appear on the screen.
✎✎ When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎✎ Only available for analog channels.
✎✎ When bar is green, you are receiving the best
possible signal.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎✎ Disabled under PC mode.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode.
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Auto Motion Plus (Off / Clear / Standard / Smooth
/ Custom / Demo): Enhances motion in fast moving
scenes.
■■ Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the ENTERE button.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
5. Press the ◄ or ► button to select Reset.
6. Press the ENTERE button.
xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
xx Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
16
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
English
BN68-02972A_Eng.indb 16
2010-04-14 �� 4:44:59
POWER
SLEEP
Preferred Language
¦¦ Changing the Preset Sound Mode
FAV.CH
OO MENUm → Sound → SRS TheaterSound →
ENTERE
(digital channels only)
Digital-TV broadcasts
MTSare capable of
simultaneous transmission
FAV.CH of many audio
tracks (for example,SLEEP
simultaneous translations
of the program into foreign languages).
MTS
P.MODE
✎✎You can only select a language among
S.MODE
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for
movies.
■■ Clear Voice: Emphasizes voices over other sounds.
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
TOOLS
impaired.
¦¦ Adjusting sound settings
OO MENUm → Sound → Equalizer → ENTERE
Equalizer
Adjusts the sound mode (standard sound mode only).
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
SRS TruSurround HD (Off / On) t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog
canbe heard more clearly.
Multi-Track Sound (MTS) t
CC
S.MODE
(analog channels only)
MEDIA.PCC
■■ Mono: Choose for channels that are
FAV.CH
broadcasting in
mono or if you are
having difficulty receiving a stereo signal.
MEDI
MTS
■■ Stereo: Choose for channels that are
broadcasting in stereo.
■■ SAP: Choose toDlisten to the Separate
D
Audio Program,
which is usually a foreign-language
TOOLS
translation.
✎✎Depending onS.MODE
the particular program being CC
broadcasted, you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
D
no noise. It is TOOLS
useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you
should use these settings.
xx TV Speaker: Off, External Speaker: On
✎✎When Speaker Select is set to TV Speaker, you
should use these settings.
xx TV Speaker: On, External Speaker: On
✎✎If there is no video signal, both speakers will be mute.
English
BN68-02972A_Eng.indb 17
P.SI
the ones being broadcasted.
SRS TheaterSound t
■■ Standard: Selects the normal sound
mode.
CHP.SI
LIS
03 Basic Features
Sound Menu
P
INFO
P.SIZEP.MODE
P.MODE
SLEEP
17
2010-04-14 �� 4:45:00
MEDI
Basic Features
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
■■ Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (On / Off)
Reset all sound settings to the factory defaults.
Setup Menu
¦¦ Setting the Time
OO MENUm → Setup → Time → ENTERE
DST (Off / On): Switches the DST(Daylight Saving Time
function) on or off.
POWER
✎✎ This function is only available when the Clock
Mode is set to Auto.
P
Time Zone: Select your time zone.
✎✎ This function is only available when the Clock
Mode is set to Auto.
¦¦ Using the Sleep Timer
OO MENUm → Setup → Time → Sleep Timer →
ENTERE
■■ Sleep Timer t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎✎ To cancel the Sleep Timer, select
Off.
¦¦ Setting the On/Off Timer
OO MENUm → Setup → Time → Timer 1 →
ENTERE
INFO button.
■■ Clock: Setting the clock is for using various timer
features of the TV.
✎✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
–– Auto: Set the current time automatically using the
time from a digital channel.
✎✎ The antenna must be connected in order to set
the time automatically.
–– Manual: Set the current time manually.
✎✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
✎✎ Available only when Clock Mode is set to
Manual.
FAV.CH
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Time
✎✎The current time will appear every time you press the
SLEEP
On Time
▲
Inactivate
▼
Off Time
Inactivate
Volume
10
Repeat
Once
Timer 1
12
00
am
12
00
am
Source
TV
Sun
Antenna
Air
Mon
Tue Wed Thu
S.MODE
Channel
3
Fri
Sat
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm
and
TOOLS
activate/inactivate. (To activate the timer with the setting
you have chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
✎✎ You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
18
English
BN68-02972A_Eng.indb 18
2010-04-14 �� 4:45:00
✎✎ When there is only one photo file in the USB, the
Slide Show will not play.
✎✎ A folder with too long of a name cannot be
selected.
✎✎ Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
✎✎ The c mark indicates the day is selected.
✎✎Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
¦¦ Locking Programs
OO MENUm →
Setup → Security → ENTERE
Security
The PIN input screen appears, Enter your 4 digit PIN number.
■■ V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
✎✎ NOTE
xx V-Chip is not available in HDMI, Component
or PC mode.
xx The default PIN number of a new TV set is
“0-0-0-0”.
xx Allow all: Press to unlock all TV ratings.
xx Block all: Press to lock all TV ratings.
V-Chip Lock (Off / On): You can block rated TV
Programs.
TV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to
control what your children are watching.
–– TV-Y: Young children / TV-Y7: Children 7 and over /
TV-G: General audience / TV-PG: Parental guidance /
TV-14: Viewers 14 and over / TV-MA: Mature
audience
–– ALL: Lock all TV ratings. / FV: Fantasy violence /
V: Violence / S: Sexual situation / L: Adult Language /
D: Sexually Suggestive Dialog
✎✎ The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-Y category,
then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then
all the categories in the young adult group will
be blocked (TV-G, TV-PG, TV-14 and TV-MA).
The sub-ratings (D, L, S, V) work similarly. So,
if you block the L sub-rating in TV-PG, then
the L sub-ratings in TV-14 and TV-MA will
automatically be blocked.
MPAA Rating: You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
–– G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should
be accompanied by an adult. / NC-17: No children
under age 17. / X: Adults only. / NR: Not rated.
✎✎ The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the PG-13 category,
then R, NC-17 and X will automatically be
blocked.
Canadian English: You can block TV programs
depending on their Anglophone Canadian.
–– C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable
for children 8 years and over to watch on their own. /
G: General programming, suitable for all audiences. /
PG: Parental Guidance. / 14+: Programming
contains themes or content which may not be
suitable for viewers under the age of 14. / 18+: Adult
programming.
✎✎ The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
English
BN68-02972A_Eng.indb 19
03 Basic Features
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
✎✎ If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
19
2010-04-14 �� 4:45:00
Basic Features
Canadian French: You can block TV programs
depending on their French Canadian rating.
–– G: General / 8 ans+: Programming generally
considered acceptable for children 8 years and over
to watch on their own. / 13 ans+: Programming may
not be suitable for children under the age of 13. /
16 ans+: Programming is not suitable for children
under the age of 16. / 18 ans+: Programming
restricted to adults.
✎✎ The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the 8 ans+ category,
then 13 ans+, 16 ans+ and 18 ans+ will
automatically be blocked also.
Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
✎✎ NOTE
xx If information is not downloaded from the
broadcasting station, the Downloadable U.S.
rating menu is deactivated.
xx Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
xx The Downloadable U.S. rating menu
is available for use after information is
downloaded from the broadcasting station.
However, depending on the information from
the broadcasting station, it may not be available
for use.
xx Parental restriction levels differ depending on
the broadcasting station. The default menu
name and Downloadable US rating change
depending on the downloaded information.
xx Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
xx The rating will automatically block certain
categories that deal with more sensitive
material.
xx The rating titles (For example: Humor Level..etc)
and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting
station.
■■ Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
20
POWER
P
How to watch a restricted channel
INFO
If the TV is tuned to a restricted channel, the V-Chip
will block it. The screen will go blank and the following
message will appear:
This channel is blocked by V-Chip. Please enter the
PIN to unblock.
✎✎ If you forget the PIN, press the remote-control
buttons in the following sequence, which resets
the pin to “0-0-0-0” : POWER (off) → MUTE → 8
→ 2 → 4 → POWER (on)
SLEEP
¦¦ Other Features
P.MODE
P.S
OO MENUm → Setup → ENTERE
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE button.
2. Choose desired
language and press the ENTERE
MTS
FAV.CH
button.
✎✎ Choose between English, Español and Français.
Caption
(On-Screen Text Messages)
■■ Caption (Off / On): You can switch the
S.MODE
caption function
on or off. If captions are
not available, they will not be displayed
on the screen.
CC
✎✎ The Caption feature does not
work in Component, HDMI or PC
modes.
■■ Caption Mode: You can select the desired caption
mode.
D
TOOLS
✎✎ The availability of captions depends on the
program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 /
Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
✎✎ Service1~6 may not be available in digital caption
mode depending on the broadcast.
English
BN68-02972A_Eng.indb 20
CH LI
2010-04-14 �� 4:45:00
MED
Size: Options include Default, Small, Standard and
Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7.
The default is Style 0.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You
can change the color of the letter. The default is White.
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Foreground Opacity: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font
Style, Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
✎✎ NOTE
xx Digital Caption Options are available only
when Default and Service1 ~ Service6 can be
selected in Caption Mode.
xx The availability of captions depends on the
program being broadcasted.
xx The Default setting follow the standards set by
the broadcaster.
xx The Foreground and Background cannot be set
to have the same color.
xx You cannot set both the Foreground Opacity
and the Background Opacity to Transparent.
Network (Network Type / Network Setup
/ Network Test / SWL(Samsung Wireless
Link) / SWL connect)
For details on set up options, refer to the “Network
Connection” instructions. (P. 24~30)
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting the
game menu.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
xx If Game Mode is On:
–– Picture mode is set to Standard and Sound mode
is set to Movie.
–– Equalizer is not available.
■■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theater products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
✎✎ Available when connecting Samsung products
that support BD Wise through a HDMI cable.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
✎✎NOTE
xx Only available when the Input source is set to TV.
To turn the melody off, set Melody to Off.
xx The Melody does not play.
–– When no sound is output from the TV because the
MUTE button has been pressed.
–– When no sound is output from the TV because the
volume has been reduced to minimum with the
VOL – button.
–– When the TV is turned off by Sleep Timer function.
English
BN68-02972A_Eng.indb 21
03 Basic Features
■■ Digital Caption Options: (digital channels only)
21
2010-04-14 �� 4:45:01
Basic Features
Support Menu
¦¦ Picture In Picture (PIP)
OO MENUm →
PIP t
Support → ENTERE
OO MENUm → Setup → PIP → ENTERE
Self Diagnosis
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
■■ Picture Test: Use to check for picture problems. If the
problem continues to occur, check the Color pattern.
✎✎NOTE
xx For PIP sound, refer to the Sound Select
instructions.
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx While V-Chip operation, the PIP function cannot be
used.
xx PIP Settings
Main picture
Component1, Component2,
HDMI1/DVI, HDMI2, HDMI3,
HDMI4, PC
Sub picture
TV
■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Air/Cable (Air / Cable): Select either Air or Cable as the
input source for the sub-screen.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / Ã): Select a size for the sub-picture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main or Sub) in PIP mode.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Sound Test: Use the built-in melody sound to check for
sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Signal Information (Digital channels only): An HD
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service center.
22
English
BN68-02972A_Eng.indb 22
2010-04-14 �� 4:45:01
■■ By Online: Upgrade the software using the Internet.
Software Upgrade can be performed can be performed by
network connection or downloading the latest firmware from
“www.samsung.com,” to a USB memory device.
Current Version - the software already installed in the TV.
✎✎Software is represented as ‘Year/Month/Day_Version’.
Software Upgrade
Current Version
2010/01/18_000001
By USB
►
By Online
Alternative Software
----/--/--_-----
✎✎ First, configure your network. For detailed
procedures on using the Network Setup, refer to
the “Network connection” instructions.
✎✎ If the Internet connection does not operate
properly, the connection may be broken. Please
retry downloading. If the problem persists,
download by USB and upgrade.
03 Basic Features
Software Upgrade
■■ Alternative Software (backup): Displays the Software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
U Move E Enter R Return
Installing the Latest Version
■■ By USB: Insert a USB drive
TV Side Panel
USB Drive
containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV. Please be
or
careful not to disconnect
the power or remove the
USB drive until upgrades
are complete. The TV will
be turned off and on automatically after completing the
firmware upgrade. When software is upgraded, video
and audio settings you have made will return to their
default settings. We advise you to write down your
settings so that you can easily reset them after the
upgrade.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
English
BN68-02972A_Eng.indb 23
23
2010-04-14 �� 4:45:01
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
¦¦ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
The Modem Port on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
IP Sharer
(having DHCP server)
TV Rear Panel
LAN Cable
yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
TV Rear Panel
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
✎✎ You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
24
English
BN68-02972A_Eng.indb 24
2010-04-14 �� 4:45:02
Network Setup (Manual)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the Menu button on your
remote, use the ▲ or ▼ button to select Setup, and
then press the ENTERE button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button. The
Network screen appears.
: Wired
►
Network Setup
Network Test
SWL(Samsung Wireless Link)
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
Network
Network Type
Getting the Network Connection Values
04 Advanced Features
Network Setup (Auto)
: Off
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
2. Set Internet Protocol Setup to Manual.
SWL connect
3. Press the ▼ button on your remote to go to the first
entry field.
4. On the Network screen, select Network Type.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. Set Network Type to Wired.
5. When done, press the Return button on your remote.
6. Select Network Setup. The Network Setup screen
appears.
6. Select Network Test to check the Internet connectivity.
U Move E Enter R Return
Network Setup
Internet Protocol Setup
: Auto IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto DNS Server
:
►
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
English
BN68-02972A_Eng.indb 25
25
2010-04-14 �� 4:45:03
Advanced Features
¦¦ Connecting to a Wireless Network
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s side panel USB jack. See the illustration below.
✎✎To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
The LAN Port on
the Wall
TV Side Panel
Wireless IP sharer
(AP having DHCP Server)
Samsung Wireless
LAN Adapter
or
LAN Cable
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
✎✎NOTE
xx You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
network.
xx Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts.com.
xx To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
xx Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
xx If you apply a security system other than the systems listed blow, it will not work with the TV.
xx If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
xx If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
xx Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected
nearby, images may appear corrupted for some channels.
xx If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
xx Connection Methods: You can setup the wireless network connection on six ways.
––
––
––
––
––
––
Samsung Auto Configuration - For non-Samsung devices.
PBC(WPS)
Auto Setup (Using the Auto Network Search function)
Manual Setup
SWL(Samsung Wireless Link) - For Samsung devices only.
Ad-Hoc
xx Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts.com.
26
English
BN68-02972A_Eng.indb 26
2010-04-14 �� 4:45:03
The picture may appear corrupted or have static for some
channels when the TV is connected to the Samsung Wireless
LAN Adapter. In such a case, establish a connection using one
of the following methods or connect the Samsung Wireless LAN
Adapter using a USB cable in a place that is not affected by
radio interference.
Method 1
Connect using the USB right angle adapter
Network Setup
(Samsung Auto Configuration)
The Samsung Auto Configuration function lets you connect
your Samsung TV automatically to non-Samsung wireless
APs. If your non-Samsung AP does not support Samsung
Auto Configuraton, you must connect using one of the
other methods: PBC(WPS), auto configuration, or manual
configuration.
✎✎To use this function, you must set SWL(Samsung
04 Advanced Features
Notice
Wireless Link) to Off in the TV’s on-screen menu.
✎✎You can check for equipment that supports Samsung
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them on.
✎✎ Because AP booting times vary, you may have to wait
approximately two minutes for your AP to boot up.
To connect the Samsung Wireless LAN Adapter using the
USB right angle adapter, follow these steps:
1. Connect the USB right angle adapter to the Samsung
Wireless LAN Adapter.
2. Connect the other end of the right angle adapter to the
USB 1 (HDD) port.
Method 2
Connect via an extension cable
✎✎ Ensure the LAN cable is connected to the WAN
port of the AP during Samsung Auto Configuration.
If it is not connected, Samsung Auto Configuration
only confirms that the TV is connected to the AP,
but does not confirm it is connected to the Internet.
2. After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV. When the Samsung Wireless LAN
Adapter establishes a connection with your TV, a pop-up
window appears.
3. As soon as a connection is established, place the AP
parallel to the Samsung Wireless LAN Adapter and not
farther than than 9 and 7/8s inches (25cm) from it.
4. Wait until the connection is automatically established.
or
To reconnect the Samsung Wireless LAN Adapter using the
extension cable, follow these steps:
1. Connect the extension cable to the USB 1 (HDD) port.
2. Connect the extension cable and Samsung Wireless LAN
Adapter.
✎✎ If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears on
the screen notifying you of the failure. If you want
to try using Samsung Auto Configuration again,
reset the AP, disconnect the Samsung Wireless
LAN Adapter and then try again from Step 1. You
can also choose one of the other connection
setup methods: PBC (WPS), auto, or manual.
5. Place the AP in a desired location.
✎✎ If the AP settings change or you install a new AP,
you must perform the Samsung Auto Configuration
procedure again, beginning from Step 1.
3. Attach the Samsung Wireless LAN Adapter to the back of
the TV near the top, using double-sided adhesive tape.
English
BN68-02972A_Eng.indb 27
27
2010-04-14 �� 4:45:04
Advanced Features
Network Setup (PBC(WPS))
How to set up automatically
How to set up using PBC(WPS)
If your router has a PBC(WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the Menu button on your
remote, use the ▲ or ▼ button to select Setup, and
then press the ENTERE button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen appears.
Network Setup
Select a network
Internet Protocol Setup
: Not Selected
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
DNS Server
: Auto :
A
►
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC(WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9. After the network connection is set up, press the
Return button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
28
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)” above.
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button.
Press the ▲ or ▼ button to select Auto, and then press
the ENTERE button.
3. Press the ▲ button to go to Select a Network, and
then press the ENTERE button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the ENTERE button.
✎✎ If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the ▲ or ▼ button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
Select a network
Security Key
0 entered
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0~9
Number
Lower case
B
C
Delete
Space
n Move E Enter R Return
7. On the Security screen, enter your network’s Pass
Phrase.
✎✎ You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
8. To enter the Pass Phrase, follow these general
directions:
–– Press the number buttons on your remote to enter
numbers.
–– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
–– Press the Red button to change case or display
symbols/characters.
–– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE button.
–– To delete the last letter or number you entered,
press the Green button on your remote.
English
BN68-02972A_Eng.indb 28
2010-04-14 �� 4:45:04
10. Wait until the connection confirmation message is
displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTERE
button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
✎✎This function is available when SWL(Samsung
Wireless Link) is set to Off in the TV’s on-screen
menu.
How to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 28)
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
✎✎ The message "Ad-hoc is a direct WI-Fi
connection with cellphone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection?" is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 28)
2. Choose Select a network. Then, the device list will be
displayed.
3. Select the device you want in the Device list.
4. If security key was applied, input the security key.
✎✎ If network does not operate normally, check
Network Setup (Manual)
If the other methods do not work, you need to enter the
Network setting values manually.
Getting the Network Connection Values
To get the Network setting values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
04 Advanced Features
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow
these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 28)
2. Press the ▼ button to select Internet Protocol Setup,
and then press ENTERE button. Press the ▲ or ▼
button to select Manual, and then press ENTERE
button.
3. Press the ▼ button to go to the first entry field (IP
Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the ► button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway
values.
7. Press the ▲ or ▼ button to go to DNS.
8. Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the ▲ button to go to Select
a Network. Select your network, and then press
ENTERE button.
10. Go to Step 4 in the "How to set up automatically" (P. 28),
and follow the directions from that point on.
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
English
BN68-02972A_Eng.indb 29
29
2010-04-14 �� 4:45:05
Advanced Features
SWL(Samsung Wireless Link)
This function lets you connect your TV to a Samsung device
(router, etc.) that supports PBC (WPS). You can connect
devices to the TV even if a sharer is not connected to the TV.
✎✎To use the Internet on the TV, the AP (access point)
must be connected to the wireless network.
✎✎If a Samsung Wireless Lan Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend connecting it to USB 1 (HDD) port.
✎✎Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that
supports PBC (WPS).
✎✎This function is available when SWL(Samsung
Wireless Link) is set to On.
✎✎To use the SWL(Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the
USB 1 (HDD) port.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the procedures
required to connect devices other than a PC (such as your
TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The Internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
How to connect using Samsung Wireless link
To connect using Samsung Wireless Link, follow these steps:
1. Follow Steps 1 through 5 in the “How to set up using
PBC(WPS)”. (P. 28)
2. Select Samsung Wireless Link by using the ▼ button
and press the ENTERE button to turn it On.
3. Select SWL connect by using the ▼ button and press
the ENTERE button.
4. If the “Press the PBC button on the PBC(WPS)
supported device to connect within 120 seconds.”
message appears, press the PBC button on the device
to connect.
✎✎ For more information, refer to the wireless network
setup manual of the device to be connected.
5. If the TV connects properly to the device after the count
in the message box starts, then the message box
disappears automatically.
✎✎ If the connection fails, please retry after 2 minutes.
30
English
BN68-02972A_Eng.indb 30
2010-04-14 �� 4:45:05
MTS
CC
MEDIA.P
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device and/or
your PC.
04 Advanced Features
Media Play
MediaPlay
Videos
OO MENUm → Application → Media Play
→ ENTERE
SUM
Change Device
View Devices E Enter R Return
¦¦ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the
USB 1 (HDD) or USB 2 jack on the side of the TV.
USB Drive
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
TV Side Panel
or
¦¦ Connecting to the PC through network
You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play
mode.
✎✎If you want to use Media Play to play files saved on your PC over your TV, you should download “PC Share Manager”
and users manual from “www.samsung.com.”
TV Side Panel
PC
LAN
or
Samsung
Wireless
LAN
Adapter
External Modem
(ADSL/VDSL/Cable TV)
LAN Cable
Wireless IP
sharer
Modem Cable
LAN Cable
LAN Cable
LAN Cable
1. For more information on how to configure your network, refer to ‘Network Connection’.
–– You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and
the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
program will be installed.
–– You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English
BN68-02972A_Eng.indb 31
31
2010-04-14 �� 4:45:07
Advanced Features
✎✎Functions that are not supported when connecting to a PC through a network:
xx The Background Music and Background Music Setting functions.
xx Sorting files by preference in the Photos, Music, and Videos folders.
xx The � (REW) or µ (FF) button while a movie is playing.
✎✎The Divx DRM, Multi-audio, embedded caption does not supported.
✎✎Samsung PC Share manager should be permitted by the firewall program on your PC.
✎✎When you use Media Play mode through a network connection, According to functions of the provided server:
xx The sorting method may vary.
xx The scene search function may not be supported.
xx The Play Continuously function, which resumes playing of a video, may not be supported.
–– The Play Continuously function does not support multiple users. (It will have only memorized the point where the
most recent user stopped playing.)
xx The
� (REW), µ (FF) or � (Pause) buttons may not work depending on the content information.
✎✎If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired
network.
✎✎It might not work properly with unlicensed multimedia files.
✎✎Need-to-Know List before using Media Play
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Connect a USB HDD to the dedicated port, USB 1 (HDD) port.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
32
English
BN68-02972A_Eng.indb 32
2010-04-14 �� 4:45:08
Move to the desired file using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Contents Mode in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of
files and page.
Videos
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section:
Displays the sorting standard.
Movie 02.avi
Jan.10.2010
Movie 04.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Movie 09.avi
SUM A
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ The sorting standard is
different depending on
the contents.
1/1 Page
/Movie 01.avi
File List Section:
You can confirm the files
and groups that are sorted
by category.
Jan.10.2010
Movie 10.avi
Jan.10.2010
Select
Change Device
04 Advanced Features
¦¦ Screen Display
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � or µ button, file list can move to next or previous page.
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired video in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During video playback, you can search using ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
1/1
Movie 01.avi
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
SUM
E Pause L Jump T Tools R Return
English
BN68-02972A_Eng.indb 33
33
2010-04-14 �� 4:45:10
Advanced Features
yy Supported Video Formats
File
Extention
Container
*.avi
*.mkv
AVI
MKV
*.asf
ASF
*.wmv
ASF
*.mp4
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Divx 3.11/4.x/5.1/6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Divx 3.11/4.x/5.1/6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
MPEG2
1920x1080
24/25/30
30
MPEG1
1920x1080
24/25/30
30
MPEG1
1920x1080
24/25/30
30
MPEG2
1920x1080
24/25/30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24/25/30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
Video Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are
not supported.
• XVID, MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
• H.263 is not supported.
• GMC 2 is not support.
• Only Samsung Techwin MJEPG is supported.
34
Audio Decoder
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi
channel or lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
English
BN68-02972A_Eng.indb 34
2010-04-14 �� 4:45:10
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Continuous Movie Play Help function is set to On
04 Advanced Features
Playing movie continuously (Resume Play)
Play continuously
Resumes playing from the last viewed
scene.
in the Settings menu, a pop-up message will appear
when you resume play a movie file.
Play continuously E Pause L Jump T Tools R Return
SUM
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired Music in the
file list.
3. Press the ENTERE button or � (Play) button.
–– During music playback, you can search using ◄ and ►
button.
–– � (REW) and µ (FF) buttons do not function during play.
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
Music 2
No Singer
Music 3
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
✎✎Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
3/15
E Pause L Jump T Tools R Return
SUM
✎✎If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
2. Press the ◄/►/▲/▼ button to select the desired photo in the
file list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start the slide
show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order.
✎✎Music files can be automatically played during the Slide Show if
SUM
E Pause L Previous/Next T Tools R Return
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
English
BN68-02972A_Eng.indb 35
35
2010-04-14 �� 4:45:12
Advanced Features
¦¦ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
Videos
✎✎ NOTE
2 files selected
/Movie 01.avi
Movie 01.avi
Movie 02.avi
Jan.10.2010
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button
Jan.10.2010
Movie 03.avi
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
and select Deselect All.
Jan.10.2010
Movie 09.avi
Movie 10.avi
Jan.10.2010
SUM
Jan.10.2010
Movie 08.avi
Jan.10.2010
3. Press the TOOLS button and select Play Selected Contents.
1/1 Page
Jan.10.2010
Change Device
Select
Sorting T Tools
Playing the video/music/photo file group
1. While a file list is displayed, move to any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Videos
Music
Photos
Basic View
Displays the whole folder. You can view the photo by selecting the folder.
c
c
c
Title
Sorts and displays the file title in Symbol/Number/Alphabet/Special order.
c
c
c
Preference
Sorts and displays the file by preference. You can change the file preference in the
file list section using the Green button.
c
c
c
Latest Date
Sorts and shows files by the latest date.
c
c
Earliest Date
Sorts and shows files by the earliest date.
c
c
Artist
Sorts the music file by artist in alphabetical order.
c
Album
Sorts the music file by album in alphabetical order.
c
Genre
Sorts music files by the genre.
c
Mood
Sorts music files by the mood. You can change the music mood information.
c
Monthly
Sorts and shows photo files by month.
36
Operation
c
English
BN68-02972A_Eng.indb 36
2010-04-14 �� 4:45:13
During playing a file, press the TOOLS button.
Category
Operation
Videos
Music
Photos
Title
You can move the other file directly.
c
Repeat Mode
You can play movie and music files repeatedly.
c
Picture Size
(Mode1 / Mode2 /
Original)
You can adjust the picture size to your preference.
Picture Setting
You can adjust the picture setting. (p. 13~16)
c
Sound Setting
You can adjust the sound setting. (p. 17, 18)
c
Subtitle Setting
You can play the video with Subtitles. This function only works if the subtitles are the
same file name as the video.
c
Audio
You can enjoy video in one of supported languages as required. The function is only
enabled when stream-type files which support multiple audio formats are played.
c
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show.
Slide Show Speed
You can select the slide show speed during the slide show.
c
Background Music
You can set and select background music when watching a Slide Show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the played file.
c
c
04 Advanced Features
Videos/Music/Photos Play Option menu
c
c
c
c
c
c
c
Settings
Using the Setup Menu
■■ Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site
and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration
is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If
you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
English
BN68-02972A_Eng.indb 37
37
2010-04-14 �� 4:45:13
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
Home Theater
TV
Optical
Cable
HDMI Cable
HDMI Cable
Anynet+
Device 1
Anynet+
Device 2, 3, 4
HDMI Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theater.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
xx Only one Home Theater can be connected.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
38
English
BN68-02972A_Eng.indb 38
2010-04-14 �� 4:45:14
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
04 Advanced Features
Anynet+ Menu
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
OO MENUm → Application → Anynet+ (HDMI-CEC) → ENTERE
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎✎ The active source on the TV must be set to TV to use the Anynet+ function.
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English
BN68-02972A_Eng.indb 39
39
2010-04-14 �� 4:45:14
Advanced Features
¦¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is
set to On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press > CH <, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel
button operates only when a tuner-embedded Anynet+ device is not connected.)
The message ‘Connecting to
Anynet+ device...’ appears on
the screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not
play.
• You cannot use the play function when Plug & Play (initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV Program cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
40
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theater) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play
(initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your
TV off and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support
Anynet+ functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a
power failure, please repeat the device scan.
English
BN68-02972A_Eng.indb 40
2010-04-14 �� 4:45:14
Message / Media / ScreenShare
OO MENUm → Application → AllShare → ENTERE
¦¦ About AllShare
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
✎✎The Media function is available in all mobile devices
AllShare connects your TV and compatible Samsung mobile
phones/ devices through a network. On your TV, you can
view call arrivals, SMS messages and schedules set on your
mobile phones. In addition, you can play media contents
including videos, photos and music saved on your mobile
phones or the other devices (such as your PC) by controlling
them on the TV via the network. Additionally, you can use
your TV for browsing web pages in your mobile phones.
✎✎For more information, visit “www.samsung.com” or
contact the Samsung call center. Mobile devices may
need additional software installation. For details, refer to
each device’s user’s guide.
which support AllShare.
■■ Allowed / Denied: Allows/Blocks the mobile phone.
■■ Delete: Deletes the mobile phone from the list.
04 Advanced Features
AllShare
✎✎ This function only deletes the name of the mobile
from the list. If the deleted mobile device is turned
on or trieds to connect to the TV, it may appear on
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TV.
✎✎NOTE
¦¦ Setting Up AllShare
xx To disable the alarm window, set Message to Off in
Setup of AllShare.
Setup
xx If OK is selected, or if OK is not selected after the
■■ Message (On / Off): Enables or disables the message
function (for call arrivals SMS messages and schedules
set on your mobile phones).
■■ Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports AllShare.
■■ ScreenShare (On / Off): Enables or disables the
ScreenShare function for using mobile phone as a
remote control.
■■ TV name: Sets the TV name so you can find it easily on
a mobile device.
✎✎ If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
AllShare
3/7
Setup
Setup
Messange
: On
Messange
Media
: On
Media
ScreenShare
: On
ScreenShare
TV name
: Home TV
message has appeared three times, the message
will be deleted. The message is not deleted from the
mobile phone.
xx The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
xx When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AllShare and select Denied to block the
phone.
Message View
If a new SMS message arrives while you are watching
TV, the alarm window appears. If you click the OK
button, the contents of the message are displayed.
✎✎ You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎ Some types of characters may be displayed as
blank or broken characters.
E Select R Return e Exit
' Setup R Return
English
BN68-02972A_Eng.indb 41
41
2010-04-14 �� 4:45:14
Advanced Features
Call Arrival Alarm
Using ScreenShare Function
If a call arrives while you are watching TV, the alarm
window appears.
Using ScreenShare, you can browse various web contents
provided by the mobile phone. For example, the image
below displays an access page for contents on a mobile.
You can read the mobile’s files and view the phone book and
calendar on the TV. Also, in the phone book, you can make a
call to another person, or send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
✎✎ You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎ Some special characters may be displayed as
blank or broken characters.
Using the Media Function
✎✎NOTE
xx You must have ScreenShare installed on your
Samsung Mobile phone/device to use this feature.
xx Doc Viewer can read files in doc format, but cannot
modify them.
xx The screen display may differ depending on the
connected device.
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm
window appears, the media contents are not played.
My Mobile
✎✎NOTE
xx If the media function executes for the first time,
the warning popup windows appears. Press the
ENTERE button to select Allow, then you can use
Media function on that device.
"Unknown Device 0" is requesting that the media file be allowed to play.
If you wish to allow the media file to be played at your device, please press
"Allow", otherwise press "Deny".
You can also change the setting (or resetting) of this feature at "AllShare
Setup".
Warning: Please note that if your device is connected to unsecured or
unfamiliar network, unwanted or inappropriate contents might be played.
If you are not sure about the network's identity or content's
appropriateness, we strongly recommend that you do not "Allow" the
request to play.
Allow
Contacts
Calendar
Doc viewer
E Select
C
Return
Using your Samsung Phone to Operate Your TV
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
only the POWER, y, z and MUTE buttons
are supported.
✎✎Even if you keep pressing down on a control button
(channel or volume) on the mobile phone the value will
only go up or down by one unit.
Deny
xx To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
xx Contents may not be played on your TV depending
on their resolution and format.
xx The ENTERE and ◄ / ► buttons may not work
depending on the type of media content.
xx Using the mobile device, you can control the media
playing. For details, refer to each mobile’s user’s
guide.
xx When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV’s Media Play menu
automatically changes. For more detail information,
refer to Media Play. (P. 31)
42
English
BN68-02972A_Eng.indb 42
2010-04-14 �� 4:45:15
Other Information
05 Other Information
Assembling the Cables
Enclose the cables in the Cable tie so that the cables are not visible through the
transparent stand.
Overly rigid or thick cables can damage input jacks over long term use.
Cable tie
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such
as desk or chair.
1
2. Slide the end of the cable with the lock attached through the looped end
of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎These are general instructions. For exact instructions, see the User
<Optional>
manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV model.
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Preparing before installing Wall-Mount (46 ~ 60 inch TVs)
To install a wall-mount from another manufacturer, use the Holder-Ring.
English
BN68-02972A_Eng.indb 43
43
2010-04-14 �� 4:45:15
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xx Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
xx Always use two people to mount the TV to a wall.
Product Family
inches
19~22
LCD-TV
23~29
30~40
46~55
57~65
70~80
80~
VESA Spec. (A * B)
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
44
English
BN68-02972A_Eng.indb 44
2010-04-14 �� 4:45:16
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
Accessories
(M6 X 16)
TV-Holder
Screw 1 (40 inch TV)
05 Other Information
Securing the TV to the Wall
(M8 X 19)
Screw 2 (46 ~ 60 inch TVs)
To prevent the TV from falling
1. Unscrew a screw attached on the back of your TV, then connect the TV-Holder [1 or 2] with the screw through the hole.
✎✎ Make sure to only use the supplied screw.
2. Firmly fasten the screw to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the
screw fastened on the wall or cabinet so that the TV is fixed.
✎✎ Purchase the screws to be used on the wall or cabinet separately.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
✎✎ Confi rm that the cord or link does not come loose frequently.
✎✎ Before moving the TV, separate the connected cord first.
✎✎ Use the Wood screw (sold separately) from the size M4x20.
Wall
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.
English
BN68-02972A_Eng.indb 45
45
2010-04-14 �� 4:45:16
Other Information
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Issues
Solutions and Explanations
Poor picture
First of all, please perform the Picture Test and confirm that your TV is properly displaying test
image.
• go to MENU - Support - Self Diagnosis - Picture Test (P. 22)
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
it did in the store.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or
Component cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Air/Cable Antenna connection: Try HD stations after performing Auto program.
✎✎
Many HD channels are upscaled from SD(Standard Definition) contents.
• Adjust the Cable/Sat box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially in fast moving pictures
such as sports and action movies.
• Low signal level can cause picture distortion. This is not a TV problem.
Color is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu.
(go to Picture mode / Color / Brightness / Sharpness) (P. 14)
• Adjust Energy Saving option in the TV menu (go to MENU – Picture – ECO Solution – Energy
Saving) (P. 14)
• Try resetting the picture to view the default picture setting.
(go to MENU - Picture - Picture Reset) (P. 16)
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes)
• Change cable/satellite box resolution.
• Set output resolution of cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
• go to MENU - Support - Self Diagnosis - Sound Test (P. 22)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too
low at maximum volume.
• Please check the volume the of device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no
sound.
• Set the Speaker Select option to TV speaker in the sound menu. (P. 17)
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. Low signal level may cause
sound distortion.
• Perform the Sound Test as explained above.
46
English
BN68-02972A_Eng.indb 46
2010-04-14 �� 4:45:17
Solutions and Explanations
05 Other Information
Issues
No Picture, No Video
The TV will not turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Setup menu. (P. 18)
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15
minutes if there is no signal.
There is no picture/video.
• Check cable connections. (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote
control.
• Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto Program then select Auto and make sure correct Cable TV
signal type is set in the menu. There are 3 options. (STD, HRC and IRC) (P. 12)
• Verify the Antenna is positioned correctly.
No Caption on digital channels.
• Check Caption Setup menu. Try changing Caption Mode Service 1 to CC1. (P. 20)
• Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion. especially on fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV problem.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution so it matches the resolutions supported by the TV.
“PC” is always shown on the source
list, even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is
connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Network Connection
The wireless network connection failed.
• Samsung Wireless USB dongle is required to use a wireless network.
• Make sure the Network Connection is set to Wireless. (P. 26)
• Make sure the TV is connected to a wireless IP sharer (Router).
Software Upgrade over the network
fails.
• Try network test in Setup menu. (P. 25, 27)
• If you have latest SW version, SW upgrade will not proceed.
English
BN68-02972A_Eng.indb 47
47
2010-04-14 �� 4:45:17
Other Information
Solutions and Explanations
Issues
Others
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers
with Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this
indicates that the set-top-box has a grounding issue. Replace the Component video cables with
an HDMI connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3)
contents.
• Black bars on Top & Bottom will be shown on movies that have aspect ratios different from
your TV.
• Adjust picture size option on your external device or TV to full screen.
The remote control does not work.
• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Sat remote control to operate the TV. Refer to Cable/Sat user manual for
SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution
accordingly. Refer to resolution settings in this manual.
Caption on TV menu is greyed out.
• Caption can not be selected in the TV menu when connected via HDMI or Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV Signal information is unavailable in
the Self Diagnosis Test menu.
• This function is only available with digital channels from an Antenna / RF/Coax connection.
(P. 22)
TV is tilted to right or left side.
• Remove the stand base from TV and reassemble it.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes
or every time TV is turned off.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.
Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play →
ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or components source.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode.
For details, refer to Plug & Play (Initial Setup). (P. 7)
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables
are flexible enough for long term use. mounting the TV to the wall, we recommend using cables
with 90 degree connectors.
✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated
technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
48
English
BN68-02972A_Eng.indb 48
2010-04-14 �� 4:45:17
PC Resolution
(Optimum)
05 Other Information
Specifications
1920 x 1080 @ 60 Hz
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel
(Left / Right)
-20˚ ~ 20˚
Model Name
LN40C610
LN46C610
LN55C610
Screen Size
(Diagonal)
40 inches
(40.0 inches measured diagonally)
46 inches
(45.9 inches measured diagonally)
55 inches
(54.6 inches measured diagonally)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
10 W X 2
15 W X 2
38.5 X 3.2 X 24.1 inches
(978.3 X 80.3 X 612.5 mm)
38.5 X 10.0 X 26.0 inches
(978.3 X 255.0 X 660.3 mm)
43.7 X 3.2 X 27.1 inches
(1110.5 X 80.3 X 687.8 mm)
43.7 X 10.8 X 29.0 inches
(1110.5 X 275.0 X 735.4 mm)
51.3 X 3.4 X 31.4 inches
(1303.7 X 85.3 X 798.8 mm)
51.3 X 12.0 X 33.3 inches
(1303.7 X 305.0 X 846.3 mm)
30.6 Ibs (13.9 kg)
38.1 Ibs (17.3 kg)
37.5 Ibs (17.0 kg)
45.9 Ibs (20.8 kg)
54.9 Ibs (24.9 kg)
65.0 Ibs (29.5 kg)
Model Name
LN40C630
LN46C630
LN55C630
LN60C630
Screen Size
(Diagonal)
40 inches
(40.0 inches measured diagonally)
46 inches
(45.9 inches measured diagonally)
55 inches
(54.6 inches measured diagonally)
60 inches
(60.0 inches measured diagonally)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
10 W X 2
15 W X 2
38.5 X 3.2 X 23.4 inches
(977.8 X 80.3 X 595.0 mm)
38.5 X 10.0 X 26.0 inches
(977.8 X 255.0 X 660.1 mm)
43.7 X 3.2 X 26.4 inches
(1110.2 X 80.3 X 670.5 mm)
43.7 X 10.8 X 28.9 inches
(1110.2 X 275.0 X 735.3 mm)
51.3 X 3.4 X 30.8 inches
(1303.2 X 85.3 X 781.3 mm)
51.3 X 12.0 X 33.3 inches
(1303.2 X 305.0 X 846.1 mm)
56.4 X 4.3 X 34.4 inches
(1432.5 X 108.5 X 872.5 mm)
56.4 X 13.2 X 37 inches
(1432.5 X 335.0 X 939.5 mm)
31.3 Ibs (14.2 kg)
38.8 Ibs (17.6 kg)
39.7 Ibs (18 kg)
48.1 Ibs (21.8 kg)
55.1 Ibs (25 kg)
65.3 Ibs (29.6 kg)
79.6 Ibs (36.1 kg)
94.6 Ibs (42.9 kg)
✎✎Design and specifications are subject to change without prior notice.
✎✎This device is a Class B digital apparatus.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
English
BN68-02972A_Eng.indb 49
49
2010-04-14 �� 4:45:17
Other Information
¦¦ License
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that
plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Pat. 7,295,673; 7,460,688; 7,519,274
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license form SRS Labs, Inc.
Open source license notice
In the case of using open source software, Open Source Licenses are available on the product menu.
50
English
BN68-02972A_Eng.indb 50
2010-04-14 �� 4:45:18
05 Other Information
Dimensions
■■ Front view / side view
7
1
2
5
3
6
8
4
(Unit: inches)
Model name
1
2
3
4
5
6
7
8
LN40C610
38.5
34.9
19.7
20.5
24.1
26.0
3.2
10.0
LN46C610
43.7
40.1
22.6
21.7
27.1
29.0
3.2
10.8
LN55C610
51.3
47.7
26.9
22.8
31.4
33.3
3.4
12.0
LN40C630
38.5
34.9
19.7
20.5
23.4
26.0
3.2
10.0
LN46C630
43.7
40.1
22.6
21.7
26.4
28.9
3.2
10.8
LN55C630
51.3
47.7
26.9
22.8
30.8
33.3
3.4
12.0
LN60C630
56.4
52.4
29.5
24.4
34.4
37
4.3
13.2
■■ Jack panel detail / rear view
5
1
6
2
4
3
(Unit: inches)
Model name
1
2
3
4
5
6
LN40C610 / LN40C630
13.2
2.7
4.0
27.6
7.9
7.9
LN46C610 / LN46C630
16.1
3.7
4.0
31.8
15.7
15.7
LN55C610 / LN55C630
20.5
3.8
4.1
39.3
15.7
15.7
LN60C630
18
5.2
10.9
44.3
23.6
15.7
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2010 Samsung Electronics America, Inc
English
BN68-02972A_Eng.indb 51
51
2010-04-14 �� 4:45:18
Other Information
Index
A
H
AllShare
Antenna
Anynet+
AUDIO OUT
Auto Adjustment
Auto Program
41
7
38
9
14
12
B
Blanking Bracket
Balance
43
17
16
8
9, 38
I
Internet Protocol Setup
28
L
License
50
M
C
Cables
Cable Tie
Caption
Clear Scrambled Channel
Clear Voice
Component
Composite
10
43
20
12
17
8
10
Media Play
Melody
Menu Language
MP3 Play
MTS
Device List
Digital Audio out
DST (Daylight Saving Time)
D-sub
DVD home theater
Dynamic Contrast
39
9, 38
18
9
9
15
E
Editing channels
Energy Saving
Equalizer
External Speaker
12
14
17
17
F
31
21
20
35
6, 17
16
18
35
23
10
17
5
33
34
T
18
V
Video play
Volume
33
5, 6, 18
W
24
25
O
ON/OFF button
Optimal resolution
Screen Fit
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Standby mode
Supported Subtitle Formats
Supported Video Formats
Timer
N
Network Connection
Network Setup
D
6
10
Wall Mount
White Balance
Wide Fit
Wireless
43
15
16
26
X
xvYCC
15
P
Photo view
Picture Reset
PIN number
PIP
Position
Power Indicator
35
16
19
22
14
5
R
FAV.CH button
Favorite Channel
52
HD
HDMI
Home theater
S
6, 12
12
Remote Control
RGB
6
15
English
BN68-02972A_Eng.indb 52
2010-04-14 �� 4:45:18
This page is intentionally
left blank.
BN68-02972A_Eng.indb 53
2010-04-14 �� 4:45:18