- No category
advertisement
EWIO-9180-M
110910
EWIO-9180-M-BACnet
110912
EWIO-9180-M-Modbus
110913
1. Beschreibung
Der EWIO-9180-M (Ethernet Web I/O-9180-Metering) ist ein leistungsstarker Datenlogger u. a. für Aufgaben im Energie- management und Energiecontrolling. Über die integrierten I/Os der
M-Bus- und RS485-(stty3) Systemschnittstelle lassen sich Zählerdaten, Temperaturen etc. erfassen sowie Schalt- und Stellsignale erzeugen.
Eine integrierte Datenbank stellt die Daten für übergeordnete
Energiemanagementsysteme über LAN bereit.
Optional kann eine Verbindung zur Managementebene über WLAN- oder UMTS-Adapter erfolgen.
Ein integrierter Webserver ermöglicht plattformunabhängig über einen Webbrowser die Konfiguration und Parametrierung des
EWIO-9180-M.
C/C++, Linux Shell und JAVA programmierte Applikationen sind direkt lauffähig.
Durch optional anschließbare Erweiterungsmodule lässt sich die
I/O-Anzahl erhöhen.
2. Wichtige Hinweise
Konformitätserklärung
Das Gerät wurde nach den geltenden Normen geprüft.
Die Konformität wurde nachgewiesen. Die Konformitätserklärung ist beim Hersteller METZ CONNECT GmbH abrufbar.
Hinweise zur Gerätebeschreibung
Die Beschreibung enthält Hinweise zum Einsatz und zur Montage des
Geräts. Sollten Fragen auftreten, die nicht mit Hilfe dieser Anleitung geklärt werden können, sind weitere Informationen beim Lieferanten oder Hersteller einzuholen.
Die angegebenen Vorschriften/Richtlinien zur Installation und Montage gelten für die Bundes republik Deutschland. Beim Einsatz des Geräts im
Ausland sind die nationalen Vorschriften in Eigenverantwortung des
Anlagenbauers oder des Betreibers einzuhalten.
Sicherheitshinweise
Für die Montage und den Einsatz des Geräts sind die jeweils gültigen
Arbeitsschutz-, Unfall verhütungs- und VDE-Vorschriften einzuhalten.
Facharbeiter oder Installateure werden darauf hingewiesen, dass sie sich vor der Installation oder Wartung der Geräte vorschriftsmäßig entladen müssen.
Montage- und Installationsarbeiten an den Geräten dürfen grundsätzlich nur durch qualifiziertes Fachpersonal durchgeführt werden, siehe Abschnitt “qualifiziertes Fachpersonal”.
Jede Person, die das Gerät einsetzt, muss die Beschreibungen dieser
Anleitung gelesen und verstanden haben.
Warnung vor gefährlicher elektrischer Spannung
Gefahr bedeutet, dass bei Nicht beachtung Lebensgefahr besteht, schwere Körper verletzungen oder erhebliche Sach schäden auftreten können.
Qualifiziertes Fachpersonal
Qualifiziertes Fachpersonal im Sinne dieser Anleitung sind Personen, die mit den beschriebenen Geräten vertraut sind und über eine ihrer
Tätigkeit entsprechenden Qualifikation verfügen.
Hierzu gehören zum Beispiel:
• Berechtigung zum Anschluss des Geräts gemäß den VDE-
Bestimmungen und den örtlichen EVU-Vorschriften sowie
Berechtigung zum Ein-, Aus- und Freischalten des Geräts unter
Berück sichtigung der innerbetrieblichen Vorschriften;
• Kenntnis der Unfallverhütungsvorschriften;
• Kenntnisse über den Einsatz und Gebrauch des Geräts innerhalb des Anlagensystems usw.
3. Technische Daten
Schnittstellen
Netzwerk:
Protokolle:
EWIO-9180
EWIO-9180-BACnet
EWIO-9180-Modbus
Ethernet 10/100BaseT
TCP/IP
TCP/IP & BACnet/IP
TCP/IP & Modbus TCP
Anschluss: RJ45-Buchse
Debugschnittstelle: serielle Schnittstelle 0 bis 3,3 V DC
Systembus:
Modbus RTU
Erweiterungsmodule (I/Os)
Modbus I/Os, MR-Serie
USB
WLAN-Adapter
UMTS-Adapter
Speicherkartenslot
Controller Einheit
Chipsatz Ralink 2870 und 3070
Chipsatz ID 0681:0047 microSD (2 GB integriert)
Prozessor interner Speicher externer Speicher
Betriebssystem
RealTimeClock
Ganggenauigkeit
Spannungsausfall-
überbrückung
ARM9 180 MHz
RAM 128 MB / Flash 64 MB bis 8 GB microSD (2GB installiert) embedded Standard Linux,
Kernel Version 2.6.38 MC
1 s/Tag;
24 Std.
Versorgung
Betriebsspannung U
B
Stromaufnahme:
: 24 V DC ±10 %
640 mA
Verlustleistung: 16 W
Netzgerät: optional
Ein- und Ausgänge (I/Os)
Digitale Eingänge
Optokoppler
Eingangsspannung
Higherkennung
Zählfrequenz
Relaisausgang
4x Wechsler
Transistorausgang
3x PNP
1x PNP
Analoge Eingänge 14 Bit
4x optisch getrennt max. U
B
>7 V AC/DC
2 kHz
S0-Schnittstelle nach
Eingänge
Zählfrequenz
DIN EN 62053-31 Klasse B
4 max. 17 Hz
Hinweis: Konfiguration der S0-Stromschnittstelle siehe EWIO-M
Benutzerhandbuch - Kapitel „Gerät/Konfiguration I/O“
Digitale Ausgänge
250 V / 5 A
Spannungsquelle mit
Strombegrenzung
24 V DC / 20 mA nicht schaltbar
15 V DC / 30 mA nicht schaltbar
2x konfigurierbar als: entweder
Widerstandsbereich
Auflösung
Fehler
40 Ohm bis 4 MOhm
0,01 Ohm ca. ±0,2 Ohm
Der Leitungslängenabgleich erfolgt über den dem Temperatureingang zugeordneten Taster E1/E2 (siehe Punkt 13).
oder
Spannungseingang
Auflösung
Fehler
2x Stromeingänge
Auflösung
Fehler
0 bis 10 V DC
10 mV (0 bis 100 %) ca. ±20 mV
2x 0 bis 20 mA DC
0,01 mA
< 0,1 mA
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Telefon +49 7702 533-0 | Fax +49 7702 533-433
Weitere Dokumentation siehe www.metz-connect.com
Fortsetzung Technische Daten
Analoge Ausgänge 14 Bit
2x Spannungsausgänge
Ausgangsstrom
Auflösung
Fehler
2x Stromausgänge
Auflösung
Fehler
2x 0 bis 10 V DC
5 mA (10 V DC)
10 mV
10 mV
2x 0 bis 20 mA DC
< 0,01 mA
< 0,1 mA
Gehäuse
Abmessungen (BxHxT)
Gehäuse
Gewicht
Einbaulage
Montage
Anreihung
Schutzart (IEC 60529)
Gehäuse
Klemmen
125 x 90 x 60 mm
45 mm Kappenmaß / 7 TE
400 g beliebig, horizontal empfohlen
Tragschiene TH35 nach IEC 60715 ohne Abstand möglich
IP20
IP20
Material
Gehäuseoberteil
Gehäuse
Farbe
Gehäuseoberteil
Gehäuseunterteil
Gehäusedeckel
Anschlussklemmen
Geräteanschluss
Ein-/Ausgänge
Aderndurchmesser
PC Polycarbonat
PA Polyamid transluzent schwarz lichtgrau
0,33 bis 2,5 mm² / AWG 22 - 12
0,3 bis max. 2,7 mm
Anzeige
Betriebsanzeigen LED
Active/Boot
Power on - ok
Bootvorgang Fehler grün rot
Link grün
10/100 MBit grün
Collision rot
Zustandsanzeigen LED
Schaltzustände gelb
Leitungslängenabgleich gelb
Einmann-Inbetriebnahme gelb
4. Prinzipbild
12 14 11 22 24 21 32 34 31 42 44 41
Fortsetzung Montage
2
Spannungsversorgung
24 V DC über Brückenstecker
7. Anschluss an UMTS-/WLAN-Adapter über USB
8. Erreichbarkeit des EWIO-M
8.1 über Webbrowser
Der EWIO-M hat im Auslieferungszustand folgende
IP-Voreinstellungen:
• DHCP
• Falls kein DHCP vorhanden,
Einstellung auf IP-Adresse 192.168.0.111
• Gateway-Adresse 192.168.0.1
• Einstellung des Webbrowsers siehe EWIO-M Handbuch
24 V
GND
B+
A-
DC - Versorgung
DC - Supply
Erweiterungen
Extensions
Ethernet
< 8GB
Micro SD
µ
P ARM9
RealTime
Clock
64MB
Flash
128MB
RAM
4 S0-Eingänge 4 S0 inputs 4 Digitaleingänge 4 Digital inputs
DC
Versorgung
Supply
Erweiterungen
Extensions
USB
24 V
GND
B+
A-
D
4 Analogausgänge 4 Analog outputs 2 x 0..10 V DC/5 mA 2 x 0(4)..20 mA
4 Analogeingänge 4 Analog inputs 2 x 0..10 V 40 Ohm .. 4 MOhm 2 x 0 - 20 mA
A
S01 1-
GND = 0 V = - (gleiches Potential)
5. Montage
Anlage spannungsfrei schalten
Gerät auf Tragschiene (TH35 nach IEC 60715, Einbau in Elektroverteiler
/ Schalttafel) setzen.
Installation
Die Elektroinstallation und der Geräteanschluss dürfen nur durch qualifiziertes Fachpersonal unter Beachtung der
VDE-Bestimmungen und örtlicher Vorschriften vorgenommen werden.
1
Gefahr!
Anschluss mit separatem Netzgerät NG4
L1/N = 230 V AC/DC
Nach Einschalten der Spannungsversorgung beginnt der Bootvorgang des EWIO-M.
Während des Bootvorgangs leuchtet die LED „Boot“ rot. Nach ca. 50
Sekunden ist der Bootvorgang abgeschlossen und die LED „Boot“ wechselt von rot nach grün. Die LED „Boot“ befindet sich rechts neben dem Deckel.
6. Anschluss an das Ethernet-Netzwerk
Den EWIO-M über die USB-Schnittstelle mit dem UMTS-/
WLAN-Adapter (optional erhältlich) verbinden.
Hierzu die Spezifikation unter 3. Technische Daten/Schnittstellen/
USB beachten!
Konfiguration siehe Benutzerhandbuch auf CD.
Direktanschluss
24 V/0 V = 24 V DC
Den EWIO-M mit einem handelsüblichen RJ45-Patchkabel mit dem
Ethernet-Netzwerk verbinden.
Konfiguration siehe Benutzerhandbuch auf CD.
MAC: 00:50:c2:3f:48:74
Um auf die Startseite des EWIO-M zu gelangen, geben Sie in der
Browser-Adresszeile den Hostnamen oder die IP-Adresse ein.
Ist in Ihrem Netzwerk DHCP vorhanden, setzt sich der Hostname aus
“ewio-” und den letzten 3Byte der MAC-Adresse zusammen. Die
MAC-Adresse befindet sich auf dem Typenschild, das sich seitlich auf dem Gerät befindet (siehe Bild oben).
Beispiel: EWIO-9180-M mit MAC-Adresse MAC: 00:50:c2:3f:48:74 entspricht dem Hostnamen ewio-3f4874, den Sie in folgender Form in die Adresszeile des Browsers eingeben: http://ewio-3f4874
Wird kein DHCP-Server gefunden, wird die IP-Adresse 192.168.0.111 eingetragen.
Befindet sich Ihr Netz im gleichen IP-Adressbeich, geben Sie in die Adresszeile des Browsers die IP-Adresse in folgender Form ein: http://192.168.0.111
Andernfalls müssen Sie mittels route add diese Adresse eintragen.
Dazu unter Windows eine Cmd-Box öffnen und folgendes Kommando eingeben: route ADD 192.168.0.111 netmask 255.255.255.255 xxx.xxx
(IP-Adresse des PCs).
Weitere Informationen zur Einstellung des EWIO-9180-M, und zu den Browseranforderungen entnehmen Sie bitte dem Dokument
“Web-Interface Benutzerhandbuch” auf der beiliegenden CD.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Telefon +49 7702 533-0 | Fax +49 7702 533-433
Weitere Dokumentation siehe www.metz-connect.com
8.2 über Konsole
Hierfür ist das optionale Adapterset Artikel-Nr. 110920 notwendig.
Um über die Konsole auf den EWIO-M zuzugreifen, muss das Adapterset wie nachfolgend beschrieben an den EWIO-M angeschlossen werden.
1
Elektronikbaugruppe entfernen wie in Punkt 14 beschrieben
2
9. Anreihen von Erweiterungsmodulen
1 2
3
Gehäusedeckel durch seitliches eindrücken lösen...
4
Stiftleiste
Typenschild
Hinweis!
Max. 6 Erweiterungsmodule der Serie EW-xxx können an den EWIO-M angereiht und per Brückenstecker angeschlossen werden.
Der Brückenstecker verbindet Versorgungsspannung und Bus an die angereihten Erweiterungsmodule.
Jedes am EWIO-M angeschlossene Erweiterungsmodul muss auf eine eigene Adresse im Bereich von 0 bis 5 eingestellt sein. Bei doppelter Vergabe einer Adresse ist die Funktionsweise der Erweiterungsmodule nicht gewährleistet.
Die Einstellungen der Erweiterungsmodule können über das Web-Interface des EWIO-M vorgenommen werden. Alle aktiven IO-Module sind im
Verzeichnis Konfiguration / IO aufgelistet.
Die angeschlossenen Erweiterungsmodule werden als “IO_extern” aufgeführt.
... und nach oben abnehmen.
5
schwarz braun rot orange gelb grün
Flachstecker des Adapter-Kabels auf die Stiftleiste aufstecken.
Dabei auf die Farbreihenfolge achten, wie auf der Adapterplatine aufgedruckt ist!
Adapterplatine auf die zugehörigen Pins stecken.
Dabei ist zu beachten, dass das Elektronikmodul mit dem Typenschild nach rechts zeigt und die Adapterplatine mit der 6-poligen Stiftleiste nach links zeigt.
6
Anschluss des Adapter-Kabels an den PC.
Bevor die USB-Verbindung mit dem PC hergestellt wird, muss der
USB-Treiber (siehe Adapterset) heruntergeladen und installiert werden.
Erst nach erfolgreicher Installation des USB-Treibers den USB-Stecker mit dem USB-Port des Computers verbinden.
Weitere Informationen zur Konfiguration und Einstellung des EWIO-M und der Erweiterungsmodule entnehmen Sie bitte der Dokumentation auf der beiligenden CD.
10. Anschluss von Modbus-Slaves
Das EWIO-M verfügt über eine RS485-Schnittstelle (stty3), deren Baud-Rate bis max. 115000 Baud eingestellt werden kann. An dieser Schnittstelle können Modbus-Slaves über die Klemmen „A‘-“ und „B‘+“ angeschlossen werden.
Der zulässige Adressbereich für weitere externe Modbus-Slaves ist auf 1 bis max. 99 festgelegt.
Die Initiierung der Kommunikation erfolgt immer durch einen Modbus-Master (Softwareapplikation). Anwender habe die Möglichkeit, einen
Modbus-Master auf das EWIO-M zu portieren (siehe Dokumentation auf CD: EWIO-M Treiber Modbus-Interface)
11. Anschluss von M-Bus-Geräten
Max. 80 M-Bus-Lasten können an den EWIO-M angeschlossen werden.
Hierzu verbinden Sie die Klemmen „M-“ und „M+“ mit den Busklemmen des M-Bus-Geräts. Bei Kurzschluss auf dem M-Bus blinkt die LED „Active/
Boot“ grün/rot.
Im Webbrowser wird der Kurzschluss automatisch dokumentiert.
Achtung! Polarität beachten! Die zwei Anschlussblöcke (M- und M+) sind intern miteinander verbunden.
Konfiguration siehe Benutzerhandbuch der Modbus RTU Module.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Telefon +49 7702 533-0 | Fax +49 7702 533-433
Weitere Dokumentation siehe www.metz-connect.com
12. Anschlüsse, Anzeige- und Bedienelemente
+ 24V
GND
B+
A-
K1 K2 K3 K4
S
01
S
02
S
03
S
04
DI 5 DI 6 DI 7 DI 8
O1 O2 C1 C2
S01 S02 S03 S04
E1
Link 10/100 Collision
E2
Reset
Beschreibung
Relaisausgang Wechsler 5 A
Analogausgang 0 bis 10 V 1
Digitalausgang 24 V / 20 mA
Analogausgang 0 bis 20 mA
1
1
1
Taster
D2/-
D3/-
D4/-
C1/-
C2/-
Kontakte
11-12-14
21-22-24
31-32-34
41-42-44
O1/-
O2/-
D1/-
1)
Konfiguration siehe Benutzerhandbuch auf CD.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Telefon +49 7702 533-0 | Fax +49 7702 533-433
Weitere Dokumentation siehe www.metz-connect.com
LED-Anzeige
K1 | ON (gelb)
K2 | ON (gelb)
K3 | ON (gelb)
K4 | ON (gelb)
O1 | ON (gelb)
O2 | ON (gelb)
+ 24V
GND
B+
A-
Fortsetzung Anschlüsse, Anzeige- und Bedienelemente
Beschreibung
Analogeingang 0 bis 10 V/40 bis 4 MOhm bei Widerstand Leitungslängenabgleich 1
Taster
E1
E2
Analogeingang 0 bis 20 mA 1
S0-Eingang mit Einmann-Inbetriebnahme 1
Digitaleingang 1
Betriebsspannung 1
Brückenstecker für Betriebsspannung 1
RS485 (stty3) 1
Brückenstecker für Erweiterungsmodule 1
M-Bus 1
USB
1
Ethernet 10/100 MBit Kommunikationsschnittstelle 1
Ethernet-Verbindung
10/100-MBit-Verbindung
Kollision auf der Kommunikationsschnittstelle
EWIO-M ist betriebsbereit
EWIO-M bootet
EWIO-M neuer Bootvorgang
S01
S02
S03
S04
Reset
Kontakte
E1/-
E2/-
I1/-
I2/-
S01/1- (1- = ON)
S02/2- (2- = ON)
S03/3- (3- = ON)
S04/4- (4- = ON)
5+/5-
6+/6-
7+/7-
8+/8-
24 V/ 0 V
24 V/ GND
B‘+/A‘- | B‘/A‘
B+/A- | B+/A-
M+/M- | M+/M-
USB
RJ45
1)
Konfiguration siehe Benutzerhandbuch auf CD
LED-Anzeige
DI5
DI6
DI/
DI8
S01 | ON (gelb)
S02 | ON (gelb)
S03 | ON (gelb)
S04 | ON (gelb)
Link (grün)
100 MBit (grün)
Collision (rot)
Active (grün)
Boot (rot)
Reset (rot)
C1 | ON (gelb)
C2 | ON (gelb)
13. Leitungslängenabgleich
Der Leitungslängenabgleich ist erforderlich, wenn die analogen Eingänge E1 bzw. E2 über die Web-Oberfläche als Widerstandseingang konfiguriert sind (siehe hierzu EWIO-M Benutzerhandbuch Kapitel „Gerät/Konfiguration I/O“).
Vorgehen:
Es wird ein handelsüblicher Widerstand (RX) im Bereich von ca. 100 Ohm bis ca. 1 kOhm benötigt.
Die höchste Genauigkeit für die Leitungslängen-Kompensation kann man mit einem Widerstand (RX) im Bereich von 100 Ohm erreichen.
Wichtig:
Die nachfolgenden drei Schritte müssen hintereinander durchgeführt werden. Wird der Ablauf unter brochen, muss mit Schritt 1 neu begonnen werden!
Versorgungsspannung an das EWIO-M anklemmen.
LED „Active Boot“ leuchtet grün
Schritt 1 - erster Tastendruck [Taster E1 oder E2]
Hiermit wird der Kanal ausgewählt, der kompensiert werden soll und der Kompensierungsvorgang eingeleitet.
Am Gerät erscheint folgende Anzeige:
Zugeordnete Kanal-LED [E1 oder E2]
á blinkt langsam grün
Referenz-Widerstand ohne Leitung direkt an Klemme [E1 / -] anklemmen.
Nach dem Anschließen ca. 1 s warten. Dann weiter mit Schritt 2.
Schritt 2 - zweiter Tastendruck
Mit dem zweiten Tastendruck wird der angeschlossene Widerstand (RX) sofort gemessen und zwischengespeichert.
Am Gerät erscheint folgende Anzeige:
Zugeordnete Kanal-LED [E1 oder E2]
á blinkt schneller grün
Referenz-Widerstand mit Leitung direkt an Klemme [E1 / -] anklemmen.
Nach dem Anschließen ca. 1 s warten. Dann weiter mit Schritt 3.
Schritt 3 - dritter Tastendruck
Mit dem dritten Tastendruck wird der angeschlossene Widerstand (RX+RL) gemessen. Anschließend wird der Leitungswiderstand (RL) berechnet, welcher der Leitungslängen-Kompensation entspricht. Dieser wird nullspannungssicher im EWIO-M gespeichert.
Am Gerät erscheint folgende Anzeige:
Zugeordnete Kanal-LED [E1 oder E2]
á
AUS
Sensor mit Leitung direkt an Klemme [E1 / -] anklemmen.
Die Prozedur ist für jeden Kanal einzeln durchzuführen. Die Installation der Hardware ist nun beendet.
14. Entfernen und Einsetzen der Elektronikbaugruppe
1 2 3
15. Einsetzen/Entfernen der microSD Karte
Vor dem Einsetzen der microSD Karte muss die Elektronikbaugruppe entfernt (siehe 14) werden!
1 2 3
4 5 6
Kon nac tak te h u nte n!
GB ma x. 8
16. Dokumentation auf der CD-ROM
Die vollständige Dokumentation zur Nutzung des EWIO-9180-M ist in den elektronischen Handbüchern auf der beiliegenden CD-ROM beschrieben
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
Benutzerhandbuch vx.xx.PDF
Quickstart vx.xx.PDF
Treiber M-Bus - InterFace vx.xx.PDF
Treiber Modbus - InterFace vx.xx.PDF
Treiber M-Bus - InterFace vx.xx.PDF
Treiber System - InterFace vx.xx.PDF
Linux vx.xx.PDF
• EWIO-M
• EWIO-M ppp vx.xx.PDF
WLAN-Anbindung vx.xx.PDF
Des weiteren beinhaltet die CD-ROM Beispiele zum Nutzen und Erzeugen des Bootmanagers (Uboot), des Linux Kernels, des Root
File Systems und der Anwender-Daten-Partition und Dateien zum Wiederherstellen des Auslieferzustandes.
Vor dem Einsetzen der Elektronikbaugruppe muss der Auswurfhebel nach hinten gelegt werden!
4 5 6
Press
Ë
Ê
klick
Auswurfhebel
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Telefon +49 7702 533-0 | Fax +49 7702 533-433
Weitere Dokumentation siehe www.metz-connect.com
EWIO-9180-M
110910
EWIO-9180-M-BACnet
110912
EWIO-9180-M-Modbus
110913
1. Description
The EWIO-9180-M (Ethernet-Web-I/O-9180-Metering) is a high performance data logger; among others for functions in energy management and energy controlling.
Meter data, temperatures etc. can be recorded via the intergrated
I/Os, the M-Bus and RS485 (stty3) system interfaces, and switching and actuating signals can be generated.
An integrated data base supplies the data for higher level energy management systems via LAN. Also, a connection via WLAN or
UMTS adapter is possible.
An integrated web server allows a platform independent configuration and parameterization of the EWIO-9180-M via internet browser.
C/C++, JAVA and Linux shell programmed applications are directly executable.
The number of I/Os can be increased by extension modules that are connected to the device.
2. Important Notes
Declaration of Conformity
The device was tested according to the applicable standards. Conformity was proofed. The declaration of conformity is available at the manufacturer METZ CONNECT GmbH.
Notes Regarding Device Description
These instructions include indications for use and mounting of the device. In case of questions that cannot be answered with these instructions please consult supplier or manufacturer.
The indicated installation directions or rules are applicable to the
Federal Republic of Germany. If the device is used in other countries it applies to the equipment installer or the user to meet the national directions.
Safety Instructions
Keep the applicable directions for industrial safety and prevention of accidents as well as the VDE rules.
Technicians and/or installers are informed that they have to electrically discharge themselves as prescribed before installation or maintenance of the devices.
Only qualified personnel shall do mounting and installation work with the devices, see section “qualified personnel”.
The information of these instructions have to be read and understood by every person using this device.
Symbols
Warning of dangerous electrical voltage
Danger means that non-observance may cause risk of life, grievous bodily harm or heavy material damage.
Qualified Personnel
Qualified personnel in the sense of these instructions are persons who are well versed in the use and installation of such devices and whose professional qualification meets the requirements of their work.
This includes for example:
• Qualification to connect the device according to the
VDE specifications and the local regulations and a qualification to put this device into operation, to power it down or to activate it by respecting the internal directions.
• Knowledge of safety rules.
• Knowledge about application and use of the device within the equipment system etc.
3. Technical Data
Interfaces
Network:
Protocols:
EWIO-9180
EWIO-9180-BACnet
EWIO-9180-Modbus
Connection
Debug interface
System bus
Modbus RTU
USB
WLAN adapter
UMTS adapter
Memory card slot
Controller Unit
Processor
Internal memory
External memory
Operating system
RealTimeClock
clock accuracy
power failure bridging
Ethernet 10/100BaseT
TCP/IP
TCP/IP & BACnet/IP
TCP/IP & Modbus TCP
RJ45 jack serial interface 0 - 3.3 V DC extension modules (I/Os)
Modbus I/Os, MR-Series
Chipset Ralink 2870 and 3070
Chipset ID 0681:0047 microSD (2 GB integrated)
ARM9 180 MHz
RAM 128 MB / Flash 64 MB
8 GB microSD (2 GB installed) embedded Standard Linux,
Kernel Version 2.6.38 MC
1 s/day
24 h
Supply
Operating voltage U
B
Current consumption
Power loss
Power supply
24 V DC ±10 %
640 mA
16 W optional
Inputs and outputs (I/Os)
Digital inputs
Optocoupler
Input voltage
High-recognition
Counting frequency
4x optically separated max. U
B
>7 V AC/DC
2 kHz
S0 current interface per DIN EN 62053-31 Class B
Inputs 4
Counting frequency max. 17 Hz
Note: See EWIO-M user manual - chapter „device/configuration I/O“ to configurate the S0 current interface.
Digital outputs
Relay outputs
4x changeover contacts 250 V / 5 A
Transistor output
3x PNP
(voltage source with current limitation)
24 V DC / 20 mA not switchable
1x PNP
Analog inputs 14 Bit
15 V DC / 30 mA not switchable
2x configurable
Resistance range
Resolution
Error
40 Ohms to 4 MOhms
0.2 K about ±0.2 °C
Cable length compensation is made by the key E1/E2 assigned to the temperature input.
Voltage input
Resolution
Error
Current input
Resolution
Error
0 to 10 V DC
10 mV (0 to 100 %) about ±10 mV
2x 0 to 20 mA DC
0.05 mA
< 0.1 mA
Continuation Technical Data
Analog outputs 14 Bit
Voltage output
Output current
Resolution
Current output
Resolution
Error
0 to 10 V DC
5 mA (10 V DC)
10 mV
2x 0 to 20 mA DC
0.05 mA
< 0.1 mA
Housing
Dimensions (WxHxD)
Housing
125 x 90 x 60 mm
45 mm cover size / 7 HP
Weight
Mounting position
Mounting
Side-by-side mounting
400 g any, horizontally recommended rail TH35 as per IEC 60715 possible without distance
Type of protection (IEC 60529)
Housing IP20
Terminal blocks IP20
Material
Upper part of housing
Housing
Color
Upper housing part
Lower housing part
Housing cover
PC polycarbonate
PA polyamide translucent black light gray
Terminal blocks
Device connection
Inputs/outputs
Wire diameter
0.33 to 2.5 mm² / AWG 22 to 12
0.3 to max. 2.7 mm
Indication
Operation indicator LED
Power on
Boot sequence/error
Ethernet Link
10/100 MBit
Status indicator LED green red green green
Switching status yellow
Cable length adjustment yellow
One-man operation yellow
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Additional documentation see www.metz-connect.com
4. Wiring diagram
12 14 11 22 24 21 32 34 31 42 44 41
24 V
GND
B+
A-
DC - Versorgung
DC - Supply
Erweiterungen
Extensions
Ethernet
< 8GB
Micro SD
µ
P ARM9
RealTime
Clock
64MB
Flash
128MB
RAM
4 S0-Eingänge 4 S0 inputs 4 Digitaleingänge 4 Digital inputs
DC
Versorgung
Supply
Erweiterungen
Extensions
USB
24 V
GND
B+
A-
D
4 Analogausgänge 4 Analog outputs 2 x 0..10 V DC/5 mA 2 x 0(4)..20 mA
4 Analogeingänge 4 Analog inputs 2 x 0..10 V 40 Ohm .. 4 MOhm 2 x 0 - 20 mA
A
S01 1-
GND = 0 V = - (same potential)
5. Mounting
Power down the equipment.
Mount the device on standard rail (TH35 per IEC 60715 in junction boxes and/or on distribution panels).
Installation
Electric installation and device termination shall be done by qualified persons only, by respecting the VDE specifications and local regulations.
1
2
Voltage supply
24 V DC by jumper plug
Danger!
Connection with separate power supply NG4
L1/N = 230 V AC/DC
When the power supply is switched-on the boot sequence of the
EWIO-M starts.
The LED „Boot“ is lighting red during the boot sequence. The boot sequence is finished after approximately 30 seconds and the LED
„Boot“ changes from red to green. The LED „Boot“ is right next to the cover.
6. Connection to the Ethernet network
7. Connection to the UMTS/WLAN adapter
by USB
Connect the EWIO-M via the USB interface to the UMTS/
WLAN adapter (optional available). See specifications item
3. Technical Data/Interfaces/USB!
Configuration see User Manual on CD.
8. Availability by web interface
8.1 Via web browser
The EWIO-M has the following IP factory settings:
• DHCP
• If no DHCP exists, setting to IP address 192.168.0.111
• Gateway address 192.168.0.1
• Web browser setting see EWIO-M manual
Enter the host name or the IP address in the browser address line to get to the EWIO-M home page.
If your network has DHCP the host name is composed of “ewio-” and the last 3Byte of the MAC address. The MAC address is on the identification plate on the side of the device (see photo above).
Example: EWIO-M with MAC address MAC: 00:50:c2:3f:48:74 makes the host name ewio-3f4874, that you enter in the address line of the browser in the following way: http://ewio-3f4874
If no DHCP server is found enter the IP address 192.168.0.111.
If your network is in the same IP address range enter the IP address in the address line of the browser as follows: http://192.168.0.111
Otherwise you have to enter this address by route add. Open a cmd box in Windows and enter the following command: route ADD 192.168.0.111 netmask 255.255.255.255 xxx.xxx
(IP-Addresse of the PC).
Please consult the file „Web Interface User manual“ on the CD attached for any further information as to the settings of
EWIO-M and the browser requirements.
Direct connection
24 V/0 V = 24 V DC
Connect the EWIO-M with a standard RJ45 patch cable to the Ethernet network.
Configuration see User Manual on CD.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Additional documentation see www.metz-connect.com
8.2 Via console
The optionally available adapter set P/N 110920 is necessary for this.
To access to the EWIO-M via console connect the adapter set to the EWIO-M as described below.
1
Remove the electronic unit as described in item 14.
2
3
9. Side-by-side mounting of extension modules
1 2
Press on the sides of the housing cover to release it ...
4
Pin header
Identification plate
Note!
A maximum of 6 extension modules series EW-xxx can be mounted side-by-side to the EWIO-M and be connected by jumper plug. The jumper plug connects supply voltage and bus to the aligned extension modules.
Each extension module connected to the EWIO-M has to be set to an own address between 0 to 5. If one address is assigned twice the functioning of the extension modules is not assured.
Settings of the extension modules can be done by the web interface of the EWIO-M. All active I/O modules are listed in the folder
Configuration / IO.
The connected extension modules are specified as “IO_extern”.
... and lift it upwards to take it off.
5
schwarz braun rot orange gelb grün
Plug the flat plug of the adapter cable on the pin header.
Respect the color sequence as it is printed on the adapter board!
Plug the adapter board on the respective pins.
The electronic unit with the identification plate has to show to the right and the adapter board with the six pole pin header has to show to the left side.
6
Connection of the adapter cable to the PC.
First download and install the USB driver (see adapter set) before you make the USB connection with the PC.
Connect USB plug with USB port of the PC only when the USB driver has been successfully installed.
For more information about configuration and setting of the EWIO-M and the extension modules see the documentation on the enclosed CD.
10. Connection of Modbus slaves
The EWIO-M has a RS485 interface (stty3), its baud rate can be set to max. 115000 Baud. Modbus slaves can be connected to this interface at contacts „A‘-“ und „B‘+“. The allowed address range for more external Modbus-Slaves is defined from 1 to 99.
Communication is always initiated by a Modbus master (software application). User have the possibility to port a Modbus master to the EWIO-M
(see documentation on CD: EWIO-M Driver Modbus Interface).
11. Connection of M-Bus modules
Max. 80 M-Bus loads can be connected to the EWIO-M.
For that purpose connect contacts „M-“ and „M+“ with the bus contacts of the M-Bus device.
In case of a short-circuit on the M-Bus the LED „Active/Boot“ is flashing green/red. The short-circuit is automatically documented in the Webbrowser.
Attention! Be aware of polarity! The two terminal blocks are internally connected with each other.
Configuration see User Manual of the Modbus RTU modules.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Additional documentation see www.metz-connect.com
12. Contacts, indicator and operating elements
+ 24V
GND
B+
A-
K1 K2 K3 K4
S
01
S
02
S
03
S
04
DI 5 DI 6 DI 7 DI 8
O1 O2 C1 C2
S01 S02 S03 S04
E1
Link 10/100 Collision
E2
Reset
Description
Relay output changeover contact 5 A
Analog output 0 to 10 V
1
Digital output 24 V / 20 mA 1
1
Button
O2/-
D1/-
D2/-
D3/-
D4/-
C1/-
C2/-
Contacts
11-12-14
21-22-24
31-32-34
41-42-44
O1/-
Analog output 0 to 20 mA 1
1)
Configuration see User Manual on CD.
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Additional documentation see www.metz-connect.com
LED display
K1 | ON (yellow)
K2 | ON (yellow)
K3 | ON (yellow)
K4 | ON (yellow)
O1 | ON (yellow)
O2 | ON (yellow)
+ 24V
GND
B+
A-
Continuation Contacts, indicator and operating elements
Description
Analog input 0 to 10 V/40 to 4 MOhm cable lenght compensation if configured as resistance input 1
Button
E1
E2
Analog input 0 to 20 mA 1
S0-Input 1
S01
S02
S03
S04
Digital Input
1
Jumper plug for extension modules
M-Bus
USB 1
1
1
Operating voltage
RS485 (stty3)
1
1
Jumper plug for operating voltage
1
Ethernet 10/100 MBit communication interface
Ethernet connection
10/100 MBit conenction
Collision on the communication interface
EWIO-M is ready
EWIO-M boots
EWIO-M new boot sequence
1
Reset
Contacts
S01/1- (1- = ON)
S02/2- (2- = ON)
S03/3- (3- = ON)
S04/4- (4- = ON)
5+/5-
6+/6-
7+/7-
8+/8-
24 V/ 0 V
24 V/ GND
B‘+/A‘- | B‘/A‘
B+/A- | B+/A-
M+/M- | M+/M-
USB
RJ45
B+/A- | B+/A-
M+/M- | M+/M-
USB
RJ45
LED display
S01 | ON (yellow)
S02 | ON (yellow)
S03 | ON (yellow)
S04 | ON (yellow)
DI5
DI6
DI/
DI8
Link (green)
100 MBit (green)
Collision (red)
Active (green)
Boot (red)
Reset (red)
C1 | ON (yellow)
C2 | ON (yellow)
1)
Configuration see User Manual on CD
13. Cable length compensation
A cable length compensation is necessary if the analog inputs E1 and/or E2 have been configured via web surface as resistance inputs (see EWIO-M
User Manual chapter „Device/configuration I/O“).
Procedure:
A conventional resistance (RX) in the range of 100 Ohms to about 1 kOhms is needed.
The highest precision for cable length compensation can be reached with a resistance (RX) in the range of 100 Ohms.
Important:
The following three steps are to perform successively. If the procedure is interrupted restart with step 1!
Connect the supply voltage to the module.
LED „Active Boot“ lights green
Step 1 - first key stroke [button E1 or E2]
The first key stroke selects the channel to compensate and it initiates the compensation procedure.
The following indication appears on the device:
Assigned channel LED [E1 or E2] flashes slowly green
á
Connect the reference resistance without cable directly to terminal [E1 / -]
Wait about 1 s after connection, then continue with step 2.
Step 2 - second key stroke
With the second key stroke the connected resistance (RX) is immediately measured and buffered.
The device shows the following indication:
Assigned channel LED [E1 or E2] flashes more rapidly green
á
Connect the reference resistance with cable directly to terminal [E1 / -]
Wait about 1 s after connection, then continue with step 3.
Step 3 - third key stroke
The connected resistance (RX + RL) is measured with the third key stroke. Then the cable resistance (RL) is calculated that conforms to the cable length compensation. This value is stored in a non-volatile way. The device shows the following indication:
Assigned channel LED [E1 or E2]
á
OFF
Connect the sensor with cable directly to terminal [E1 / -]
This procedure is to perform separately for each channel. Now the installation of the hardware is finished.
14. Remove and insert the electronic unit
1 2 3
15. Insert the microSD card
Remove the electronic unit before inserting the microSD card (see 11)!
1 2
4 5
3
6
Cont act s down ma x. 8
GB
16. Documentation on the CD-ROM
The complete documentation concerning the use of the EWIO-9180-M is described in the electronic manuals on the enclosed CD-ROM.
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
• EWIO-M
User Manual vx.xx.PDF
Quickstart vx.xx.PDF
Driver M-Bus - InterFace vx.xx.PDF
Driver Modbus - InterFace vx.xx.PDF
Driver M-Bus - InterFace vx.xx.PDF
Driver system - InterFace vx.xx.PDF
Linux vx.xx.PDF
• EWIO-M
• EWIO-M ppp vx.xx.PDF
WLAN connection vx.xx.PDF
In addition the CD-ROM contains examples how to use and generate the boot manager (Uboot), the Linux Kernel, the Root File System and the user data partition as well as files to reset the factory default settings.
Move the ejection lever backwards before inserting the electronic unit.
4 5 6
Press
Ë
Ê
click
Auswurfhebel
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Additional documentation see www.metz-connect.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project