DVI & HDMI
DVI 104
DVI FIBER OPTIC EXTENDER
n Transmits single link DVI-D signals
over four multimode fiber optic
cables
n Sends 1920x1200 and HDTV
1080p/60 signals up to 500 meters
(1,640 feet)
n All digital technology for high
performance signal transmission
n Pixel-for-pixel image quality
n EDID Minder
n Pre-terminated multimode fiber optic
cables available from Extron
The Extron DVI 104 is a transmitter and receiver set that sends single link DVI
signals over long distances up to 500 meters (1,640 feet) over four multimode
fiber optic cables. It uses all digital technology to deliver perfect pixel-for-pixel
transmission of computer-video images up to 1920x1200 resolution, including
HDTV 1080p/60.
www.extron.com
DESCRIPTION
The Extron DVI 104 Fiber Optic Extender is a transmitter and receiver
set that provides an effective, economical solution for extending
single link DVI-D signals significantly beyond the specified 5 meter
(15 foot) limitation for standard DVI cables. Engineered for reliability
and exceptional high resolution image performance, it uses all digital
technology to deliver perfect pixel-for-pixel transmission of computervideo images up to 1920x1200 resolution, including HDTV 1080p/60.
The DVI 104 extends DVI-D signals over four multimode fiber optic
cables at lengths up to 500 meters (1,640 feet).
The transmitter and receiver are housed in extremely compact
DVI cable-type clamshell enclosures and connect to the fiber
optic cables via industry standard LC-type connectors. The cables
can be run through conduits and other tight spaces without the
DVI 104 transmitter and receiver attached, simplifying installation.
Furthermore, the DVI 104 transmitter and receiver units connect
directly to DVI sources and displays, so that no special mounting is
necessary.
To ensure a reliable DVI connection, the DVI 104 features EDID
Minder, which automatically manages EDID communication with
the input source, so that the source powers up properly and reliably
delivers content to the display.
The DVI 104 is ideal for a wide range of applications requiring long
distance transmission of high resolution content with the highest
quality. Because transmission of content is inherently secure and
immune to outside interference, applications utilizing fiber optics
are favored in many commercial, rental and staging, and medical
environments.
FEATURES
n Transmits single link DVI-D signals over four multimode fiber
optic cables
n Sends 1920x1200 and HDTV 1080p/60 signals up to
500 meters (1,640 feet)
n All digital technology provides pixel-for-pixel performance
with signals up to 1920x1200, including HDTV 1080p/60
n EDID Minder – A feature that enables automatic and continuous
EDID management with the input source. EDID Minder ensures
that the source powers up properly and reliably outputs content to
the display.
n Industry standard LC connectors provide reliable physical
connectivity and precise fiber core alignment
DVI 104 transmitter and receiver detached, fiber optic cables
can easily be run through conduit and other tight-spaced
environments.
n Direct device connection – The DVI 104 transmitter and receiver
are housed in adapter-sized enclosures that attach directly to the
source device and the display without the need for extra cables or
mounting accessories.
n Pre-terminated multimode fiber optic cables available from
Extron in various lengths from 10 meters (33 feet) to 300
meters (984 feet)
n External universal power supply included – Provides worldwide
power compatibility.
n Self-powered by source signal – The DVI 104 can be powered by
the DVI port on the attached source device, eliminating the need
for power supply installation.
n Transmitter and receiver detachable from cables – With the
Projector
Power
Supply - Optional
DVI 104 Tx
Power
Supply - Optional
Transmitter
Extron
ISS 506
Seamless Switcher
DVI 104 Rx
Receiver
Up to 500m
(1640 feet)
Extron
4LC MM Series
Four Multimode Fiber
Long Distance, Fully Digital Pathway Between Source Device and Display
The DVI 104 provides a high quality, long distance, fully digital pathway for high resolution DVI signals from the source device to the
display. The use of fiber optic cables provides for long distance transmission up to 500 meters (1,640 feet) while fully maintaining
pristine image quality for DVI signals up to 1920x1200 and HDTV 1080p/60. The DVI 104 is especially ideal for many applications in
large-venue environments where high resolution digital video must be displayed and distances between the source and the projector
are substantial.
SPECIFICATIONS
OPTICAL FIBER INTERCONNECTION BETWEEN TRANSMITTER AND RECEIVER
NOTE: These transceivers are class 1 laser products. They meet the safety
regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.
Optical fiber interconnection between transmitter and receiver
Number/type���������������������������������� 4 fiber optic, multimode
Connectors������������������������������������� 4 female LC connectors
Operating distance�������������������������� Up to 1,640’ (500 m)
Nominal peak wavelength................ 850 nm
NOTE: Operating distance is approximate. This is a typical distance. The
maximum distance may be greater than these typical numbers depending on
factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or
chromatic dispersion, environmental factors, and kinks.
VIDEO
Gain�����������������������������������������������
Maximum data rate������������������������
Maximum pixel clock����������������������
Resolution range�����������������������������
Formats�������������������������������������������
Standards����������������������������������������
Unity
4.95 Gbps (1.65 Gbps per color)
165 MHz
Up to 1920x1200 or 1080p @ 60 Hz
RGB and YCbCr digital video
DVI 1.0
VIDEO INPUT — TRANSMITTER
Number/signal type������������������������ 1 single link DVI
Connectors������������������������������������� 1 male DVI-D
VIDEO OUTPUT — RECEIVER
Number/signal type������������������������ 1 single link DVI
Connectors������������������������������������� 1 male DVI-D
Regulatory compliance
Safety������������������������������������������� CE, C-tick, CUL, UL
EMI/EMC������������������������������������� CE, C-tick, FCC Class A, FDA Class 1, ICES,
VCCI
Environmental������������������������������ Complies with the appropriate
requirements of RoHS.
MTBF���������������������������������������������� 30,000 hours
Warranty����������������������������������������� 3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model
DVI 104 Tx/Rx
Version Description
Part Number
Transmitter/Receiver Set.................................. 60-977-01
Optional Accessories
4LC MM Series
LC to LC Multimode Fiber Optic Cable Assemblies
4LC MM/10m
10m (33')........................................................ 26-652-01
4LC MM/20m
20m (66')........................................................ 26-652-02
4LC MM/30m
30m (98')........................................................ 26-652-03
4LC MM/40m
40m (131')...................................................... 26-652-04
4LC MM/50m
50m (164')...................................................... 26-652-05
4LC MM/60m
60m (197')...................................................... 26-652-06
4LC MM/70m
70m (230')...................................................... 26-652-07
4LC MM/80m
80m (263')...................................................... 26-652-08
4LC MM/90m
90m (295')...................................................... 26-652-09
4LC MM/100m 100m (328').................................................... 26-652-10
4LC MM/200m 200m (656').................................................... 26-652-11
4LC MM/300m 300m (984').................................................... 26-652-12
GENERAL
Power��������������������������������������������� S upplied by an external power supply or by
the source device’s 5 VDC output on pin 14
of a DVI connector
External power supply��������������������� 100 VAC to 240 VAC, 50/60 Hz, external; to
5 VDC, 1 A, regulated
Power input requirements��������������� 5 VDC, 0.1 A
Temperature/humidity��������������������Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling������������������������������������������� Convection, no vents
Mounting
Rack mount���������������������������������� No
Furniture mount��������������������������� No
Enclosure type��������������������������������� Plastic
Enclosure dimensions���������������������� 0.6" H x 1.5" W x 2.3" D (1.5 cm H x
3.9 cm W x 5.9 cm D) (Depth excludes
DVI connector.)
Product weight������������������������������� 0.7 lbs (0.3 kg) per Tx/Rx pair
Shipping weight������������������������������ 1 lb (<1 kg) per Tx/Rx pair
Vibration����������������������������������������� ISTA 1A in carton (International Safe Transit
Association)
4LC MM/10m
Specifications are subject to change without notice.
APPLICATION DIAGRAM
PC with DVI Output
Flat Panel Display
with DVI-D Input
DVI 104 Tx
Transmitter
Power
Supply - Optional
Power
Supply - Optional
DVI 104 Rx
Receiver
Extron
4LC MM Series
Four Multimode
Fiber
Up to 500m
(1640 feet)
PANEL DRAWINGS
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
Extron Europe
Extron Asia
Extron Japan
Extron China
Extron Dubai
+800.633.9876
+800.3987.6673
+800.7339.8766
+81.3.3511.7655
+81.3.3511.7656 FAX
+400.883.1568
+971.4.2991800
+971.4.2991880 FAX
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4040
+31.33.453.4050 FAX
+65.6383.4400
+65.6383.4664 FAX
Inside USA / Canada Only
Inside Europe Only
Inside Asia Only
© 2011 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
02-2011
68-1579-01
REV. A1