Magnavox MWR20V6 Owner`s manual

Before you start
Owner’s Manual
Connections
Recordable disc
• We strongly recommend for good recording quality:
SONY DVD+RW 4x, MAXELL DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, TDK DVD+R 4x/8x/16x,
MAXELL DVD-RW 4x, MAXELL DVD-R 8x/16x
• Discs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+RW 4x VERBATIM DVD+R 8x
VERBATIM DVD-RW x
VERBATIM DVD-R 8x
JVC DVD-RW 4x
MAXELL DVD-R 16x
DVD Recorder with Video Cassette Recorder
Getting started
MWR20V6
OPEN/CLOSE
Recording
POWER ON
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
CHANNEL
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
Playing discs
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
Supplied Accessory
• RF cable
• Audio/Video cables • Owner’s Manual
(WPZ0901TM00)
(WPZ010TM015
(1VMN13)
or WPZ010LTE01)
• Quick Guide
(1VMN14)
Editing
• Remote control
(NB550UD) with
two AAA batteries
Owner's Manual
TOLL FREE : 1-800-605-8453
Before you use this unit , you need to complete connections. Refer to
“Connections” on pages 14-16.
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
E9A80UD_MWR0V6_01.indd 1
Others Español
To record a program easily, refer to “Easy DVD recording” on pages 17-18 after
connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
VCR functions
or visit our web site at http://www.funai-corp.com
Changing the
Setup menu
Please read before using this equipment.
If you need additional operating assistance after reading this owner’s manual or
to order replacement accessories, please call
006/01/18 11:45:1
Before you start
Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this
device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
LOCATION:INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modi-
fications to this equipment may cause harmful interference unless the modifications are expressly
approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain
this information for future reference.
Model No. _____________________
Serial No. _____________________
EN
E9A80UD_MWR0V6_01.indd 006/01/18 11:45:1
Before you start
IMPORTANT SAFEGUARDS
NFPA No. 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Editing
Changing the
Setup menu
VCR functions
Others Español
E9A80UD_MWR0V6_01.indd 3
Playing discs
EN
Recording
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this product through any openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
18. Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d.If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation.
e.If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform
safety checks to determine that the product is in proper
operating condition.
22. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Getting started
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
Connections
1.Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2.Retain Instructions- The safety and operating instructions
should be retained for future reference.
3.Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions
should be followed.
5.Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6.Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this product near water,
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the appliance should follow the
manufacturer's instructions and
should use a mounting accessory
recommended by the manufacturer. An
appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
9.Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization - This product is equipped with
a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
Before you start
Precautions (cont’d)
006/01/18 11:45:13
Before you start
Precautions (cont’d)
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit.
Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or
humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong
magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to
our Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm
place or after heating a cold room or under conditions of high humidity. Do not use this unit at least
for hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Notice for progressive scan output
Consumers should note that not all high definition television sets are fully compatible with this
product and may cause artifacts to be displayed in the picture. In case of picture problems with 55
progressive scan output, it is recommended that the user switch the connection to the ‘standard
definition’ output. If there are questions regarding your TV set compatibility with this 55p DVD
recorder, please contact our customer service center.
4
EN
E9A80UD_MWR0V6_01.indd 4
006/01/18 11:45:13
Before you start
Maintenance
Editing
Changing the
Setup menu
VCR functions
Others Español
E9A80UD_MWR0V6_01.indd 5
5
Playing discs
EN
Recording
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on
recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD.
DVDs created using Dolby Digital Recording will play back on all DVD-Video players.”
Note: This is true when the players are compatible with actual recordable DVD discs.
Getting started
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
Connections
SERVICING
• Please refer to relevant topics on Troubleshooting on pages 77-80 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned
on the front page to locate an Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do
not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent,
abrasive cleaning agents or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer to the relevant sections and to
“Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of use, or the usage of rental or worn tapes
can cause this problem. If a streaky or snowy picture appears during playback, the video heads in
the unit may need to be cleaned.
1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
.If a Video Head Cleaner does not solve the problem, please call our help line mentioned on the
front page to locate an Authorized Service Center.
NOTES:
• Remember to read the instructions along with the video head cleaner before use.
• Clean video heads only when problems occur.
IR SIGNAL CHECK
If the remote control does not work properly, you can test if the remote control sends out the infrared
signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to
define the cause of malfunction.
• With an AM radio:
Tune an AM radio to a band with no broadcasting. Press a button on remote control toward the
radio. Sound will be fluttering when you press any key and the radio receives the signal. This
means the remote control unit is working.
• With a digital camera (including built-in camera of cellular phone):
Direct a digital camera to remote control, press and hold a button on remote control. If infrared
light appears through digital camera, the remote is working.
Before you start
Precautions (cont’d)
006/01/18 11:45:13
Before you start
Table of contents
Before you start . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Symbol in this Owner’s Manual . . . . . . . . . . . . . . . 7
Functional overview . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing batteries in the remote control . . . . . . . 10
Using a remote control . . . . . . . . . . . . . . . . . . . . . 10
The VCR/DVD recorder switching . . . . . . . . . . . . 10
Setup menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Display menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connections . . . . . . . . . . . . . . . . . . . . . . 14
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . 14
Connection to a cable box or satellite box . . . . . 15
Connection to an Audio System . . . . . . . . . . . . . 16
Getting started . . . . . . . . . . . . . . . . . . . . 17
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . . . 17
Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Getting channels automatically . . . . . . . . . . . . . . 19
Adding/deleting channels . . . . . . . . . . . . . . . . . . . 20
Selecting the TV stereo or SAP . . . . . . . . . . . . . . 21
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . 22
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . 23
Setting the Daylight Saving Time . . . . . . . . . . . . . 24
Selecting the TV aspect ratio . . . . . . . . . . . . . . . . 24
Recording . . . . . . . . . . . . . . . . . . . . . . . . 25
Information on DVD recording . . . . . . . . . . . . . . . 25
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Recordable disc . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making discs playable in other DVD player
(Finalize/Make Edits Compatible) . . . . . . . . . . . . 26
Before recording . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Replacing disc menu . . . . . . . . . . . . . . . . . . . . . . 27
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . 27
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
One-touch Timer Recording (OTR) . . . . . . . . . . . 29
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Hints for Timer Recording . . . . . . . . . . . . . . . . . . 32
Overwriting an existing title . . . . . . . . . . . . . . . . . 33
Overwriting from the beginning of the title . . . . . . 33
Overwriting in the middle of the title . . . . . . . . . . 33
Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . 34
Settings for an external source . . . . . . . . . . . . . . 35
Connection to an external source . . . . . . . . . . . . 35
Recording from an external source . . . . . . . . . . . 36
Setting a disc to protect . . . . . . . . . . . . . . . . . . . . 36
Playing the discs in other DVD players . . . . . . . 37
Finalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Auto finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Playing discs . . . . . . . . . . . . . . . . . . . . . 41
Information on DVD play . . . . . . . . . . . . . . . . . . . 41
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Playing MP3 disc . . . . . . . . . . . . . . . . . . . . . . . . . 43
Playing discs using the disc menu . . . . . . . . . . . . 44
Playing discs using the title menu . . . . . . . . . . . . 44
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Special playback . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . 45
EN
E9A80UD_MWR0V6_01.indd 6
Skipping TV commercials during play . . . . . . . . . 45
Rapid play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Step by step playback . . . . . . . . . . . . . . . . . . . . . 46
Slow forward / Slow reverse play . . . . . . . . . . . . 46
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . 48
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Repeat/Random/Program playback . . . . . . . . . . . 50
Repeat playback . . . . . . . . . . . . . . . . . . . . . . . . . 50
Random playback . . . . . . . . . . . . . . . . . . . . . . . . 50
Program playback . . . . . . . . . . . . . . . . . . . . . . . . 51
Selecting the format of audio and video . . . . . . . 51
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . 51
Switching audio soundtrack . . . . . . . . . . . . . . . . . 52
Switching virtual surround system . . . . . . . . . . . . 52
Switching camera angles . . . . . . . . . . . . . . . . . . . 53
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . 53
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Information on disc editing . . . . . . . . . . . . . . . . . 54
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . 54
Editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Editing discs (Setup menu) . . . . . . . . . . . . . . . . . 54
Editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Putting names on titles . . . . . . . . . . . . . . . . . . . . 56
Setting chapter marks . . . . . . . . . . . . . . . . . . . . . 57
Clearing chapter marks . . . . . . . . . . . . . . . . . . . . 58
Hiding chapters . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting pictures for thumbnails . . . . . . . . . . . . . . 60
Dividing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Editing discs (Setup menu) . . . . . . . . . . . . . . . . . 62
Putting name on disc . . . . . . . . . . . . . . . . . . . . . . 62
Setting or releasing disc protect . . . . . . . . . . . . . 63
Erasing disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Making edits compatible . . . . . . . . . . . . . . . . . . . 65
Changing the Setup menu . . . . . . . . . . 66
Tour of the Setup menu . . . . . . . . . . . . . . . . . . . . 66
Language setting . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Video setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Settings for Parental lock level . . . . . . . . . . . . . . 72
Settings for PBC (Playback Control) . . . . . . . . . . 73
VCR functions . . . . . . . . . . . . . . . . . . . . 74
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Recording and One-touch Timer Recording . . . 74
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
One-touch Timer Recording (OTR) . . . . . . . . . . . 75
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Other operations . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 77
RF output switch . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Language code . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Frequently Asked Questions . . . . . . . . . . . . . . . . 82
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Español . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Limited Warranty . . . . . . . . . . . Back Cover
006/01/18 11:45:14
Before you start
Up to 8 program recording:
You can program the unit to record up to 8 programs,
with in a month in advance. Daily or weekly program
recordings are also available.
One-touch Timer Recording:
Dubbing mode:
Left channel stereo recording:
This unit can record the sound of the Left channel monaural input as Left and Right channels automatically.
Automatic Chapter mark setting:
DVD mode
Automatic Title list making:
The unit makes a title list with the index automatically.
Automatic finalizing (DVD+R, DVD-RW/R only):
The unit can finalize discs automatically after finishing all
Timer Recordings or when the disc runs out recordable space.
Play
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into two or more.
Putting name on disc:
You can put your favorite disc name.
Compatibility
DVD mode
Available for playing discs on a regular DVD player:
Recorded discs can be played on regular DVD players,
including computer DVD drives compatible with DVDVideo playback. You will need to finalize the discs
recorded on DVD+R/DVD-RW/DVD-R discs to play in
other DVD players.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in
higher resolution than that of traditional television signals.
Symbol in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
*DVD-RW (VR mode) disc is not played in this unit.
Symbol
DVD-V
Quick search for what you want to watch:
Available to DVD+RW discs
DVD+R
Available to DVD+R discs
Virtual Surround System:
You can enjoy stereophonic space through your exciting
2 channel stereo system.
Playing back on MP3 disc:
DL
DVD+R
Available to DVD+R DL discs
Available to DVD-RW discs formatted
with DVD+VR mode
+VR
Available to DVD-R discs formatted
DVD-R
with DVD+VR mode
Video
Available to DVD-RW discs
DVD-RW (Video mode, Finalized)
Video
Available to DVD-R discs
DVD-R
(Video mode, Finalized)
+VR
DVD-RW
CD
Available to Audio CDs
Quick search for what you want to watch:
MP3
Available to CD-RW/R discs with MP3
files
You can easily find the part you want to watch using
the Index search/Time search functions. An index mark
will be assigned at the beginning of each recordings
you make. For Time search function, you can go to
a specific point on a videotape by entering the exact
amount of time you wish to skip.
Editing
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / Clearing chapter marks:
You can set/clear chapter marks on titles.
E9A80UD_MWR0V6_01.indd 7
VCR
First:
(Press:)
First:
(Press:)
Available to Video CDs
Available to VHS tapes
Use only
tapes marked with
this unit.
Indicates that you need to select the DVD
DVD
mode by pressing [DVD] on the remote
control before proceeding next step.
VCR
Indicates that you need to select the VCR
mode by pressing [VCR] on the remote
control before proceeding next step.
EN
Others Español
Deleting titles:
DVD mode
Video CD
VCR functions
You can enjoy MP3 files which are recorded on
CD-RW/R.
VCR mode
Changing the
Setup menu
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter or time.
Available to DVD-Video discs
Editing
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you are allowed
to experience the theater surround sound from discs
with surround sound system.
Description
DVD+RW
DVD mode
Theater surround sound in your home:
Playing discs
Chapter marks will be put on recordings as you set in
the Setup menu before attempting to record.
You can change pictures for thumbnails.
Recording
You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be possible only
if the DVD disc or a videotape is not copy protected.
You cannot record on a videotape when its record tab is
removed.
Setting pictures for thumbnails:
Getting started
You can easily set a recording time as you prefer. Every time
[RECORD I], [DVD REC I] or [VCR REC I] is pressed
during recording, the recording time will be increased by 30
minutes up to 8 hours. The unit will automatically turn off
when the recording time you set is reached.
To keep others from playing back some chapters without
permission, you can hide chapters.
Connections
This unit is compatible with DVD+RW/DVD-RW, which
is rewritable repeatedly and DVD+R/DVD-R, which is
available for recording once. You can choose either one
for your convenience. Even if you choose DVD-RW/R
discs, these discs are formatted with DVD+VR mode.
Before you start
Features
This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record on DVD discs and
edit them after that. The following features are offered with this unit.
Hiding unwanted chapters:
Recording
DVD mode VCR mode
006/01/18 11:45:14
Before you start
Functional overview
Front Panel
2
3
4*
5
OPEN/CLOSE
POWER ON
STANDBY-ON
REW
(*) The unit can also
be turned on by
pressing these
buttons.
1
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
IR
22 20 18
23 21 19
1. STANDBY-ON
button (DVD/VCR)
Press to turn on and off the unit.
2. POWER ON indicator (DVD/VCR)
Red LED lights up when power is on.
3. Cassette compartment (VCR)
Insert a videotape here.
4. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
5. Disc tray (DVD)
Place a disc when it is open.
6. AUDIO input jacks (EXT2) (DVD/VCR)
Use to connect external equipment with a standard audio cable.
7. VIDEO input jack (EXT2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
8. S-VIDEO input jack (EXT2) (DVD/VCR)
Use to connect the S-Video output of external equipment
with an S-Video cable.
9. RECORD I button (DVD)
Press once to start recording.
Press repeatedly to start a One-touch Timer Recording.
10.PLAY B button (DVD)*
Press to start or resume play.
11.STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding Timer Recording in DVD.
12.DVD indicator
Lights up when the DVD output mode is selected.
13.SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
14.VCR indicator
Lights up when the VCR output mode is selected.
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
14 12 10*
16 15 13 11 9 8 7 6
17
15.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the Setup menu.
16.CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
17.Display
Shows various information and messages.
18.Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
19.RECORD I button (VCR)
Press once to start a recording. Press repeatedly to
start a One-touch Timer Recording.
20.PLAY B button (VCR)
Press to start playback.
21.STOP C / EJECT A button (VCR)
EJECT A button
Press to remove the videotape from the cassette
compartment when the power is on or off.
STOP C button
Press to stop videotape playback or recording.
Press to stop the proceeding Timer Recording in VCR.
22.F.FWD D button (VCR)
Press to rapidly advance the videotape, or view the picture
rapidly in forward during playback. (Forward Search)
23.REW E button (VCR)
Press to rewind the videotape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
1
2
3 4
5
Rear Panel
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
L
OUT
COAXIAL
R
COMPONENT
VIDEO OUT
S-VIDEO
DVD/VCR
IN - AUDIO - OUT
Y
L
L
PB
/CB
R
R
IN
• These jacks are
useful only in
DVD mode.
ANTENNA
IN
IN - VIDEO - OUT
PR
/CR
OUT
12 11 10
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2. COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with a component video cable.
3. AUDIO IN jacks (EXT1) (DVD/VCR)
Use to connect external equipment with a standard
audio cable.
4. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard audio cable.
5. TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
6. TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
7. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
8
EN
E9A80UD_MWR0V6_01.indd 8
98 7
6
8. VIDEO IN jack (EXT1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
9. S-VIDEO IN jack (EXT1) (DVD/VCR)
Use to connect the S-Video output of external
equipment with an S-Video cable.
10. S-VIDEO OUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with a standard audio cable.
12. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input jack
with a digital coaxial cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
S-VIDEO
Y
L
COAXIAL
R
OUT
PB
/CB
IN
DVD/VCR
IN - AUDIO - OUT
L
L
R
R
ANTENNA
IN
IN - VIDEO - OUT
PR
/CR
OUT
006/01/18 11:45:15
Before you start
Remote Control
Playing discs
Editing
Changing the
Setup menu
VCR functions
Others Español
E9A80UD_MWR0V6_01.indd 9
9
Recording
EN
Getting started
-
20. AUDIO button (VCR)
During playback a HiFi videotape,
press to change the AUDIO OUT
setting “HIFI” and “MONO”.
21. OPEN/CLOSE A button
(DVD/VCR)*
• DVD mode
Press to open or close the disc tray.
• VCR mode
Press to remove the videotape
from the cassette compartment.
22. TITLE button (DVD)
Press to display the Title list.
23. DISPLAY button (DVD/VCR)
Press to display the Display menu
on or off.
24. OK button (DVD/VCR)
Press to confirm or select menu
items.
25. SETUP button (DVD/VCR)
Press to display the Setup menu.
During DVD playback, press and
hold for more than 3 seconds to
switch the progressive scanning
mode to the interlace mode.
26. SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or when playback is paused,
press to play back in forward step
by step.
27. F.FWD D button (DVD/VCR)
• DVD mode
During playback, press to play
back in fast forward.
Or when playback is paused,
press to play back in slow
forward.
• VCR mode
Press to rapidly advance the
videotape or view the picture
rapidly in forward during playback.
28. STOP C button (DVD/VCR)
Press to stop playback or
recording.
Press to exit from the title list.
29. REC MODE button (DVD/VCR)
Press to change the recording
mode.
30. DVD REC I button (DVD)
Press to activate the remote
control in DVD mode (refer to
page 10).
Press once to start a recording.
Press repeatedly to start a Onetouch Timer Recording.
31. RAPID PLAY button (DVD)
During playback, press to
playback in a slightly faster/slower
speed with keeping the audio
quality.
32. CM SKIP button (DVD)
During playback, press to skip to
the 30 second advanced point.
33. DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD
to VCR) duplication which you set
in the Setup menu.
Connections
7. RETURN button (DVD/VCR)
Press to return to the previously
1
displayed menu screen.
2
8. Cursor K / L / { / B buttons
VIDEO/TV
VCR
DVD OPEN/CLOSE
3
21*
(DVD/VCR)
4
.@/:
ABC
DEF
Press to select items or settings.
3
1
2
9. DISC MENU button (DVD)
GHI
JKL
MNO
Press to display the Disc menu.
4
5
6
5
PQRS
TUV
WXYZ
Press to change Original and
8
9
7
Playlist on the TV screen.
CLEAR/C-RESET SPACE
TITLE
(VR mode only)
0
6
22
10. SKIP H button (DVD)
RETURN
DISPLAY
During playback, press to skip to
7
23
the previous chapter or track.
24
8
OK
Or when playback is paused,
DISC MENU
SETUP
press to play back in reverse step
9
25
by step.
11. PLAY B button* (DVD/VCR)
10
26
11*
Press to start or resume playback.
12
27
12.
REW E button (DVD/VCR)
28
13
CHANNEL
• DVD mode
14
During playback, press to play
TIMER VCR REC DVD REC REC MODE
back in fast reverse.
15
29
16
30
TIMER SET SLOW CM SKIP RAPID PLAY
Or when playback is paused,
17
31
press to play back in slow
18
32
SEARCH AUDIO DUBBING
reverse.
19
33
• VCR mode
20
Press to rewind the videotape
(*) In DVD mode, the unit can also be
or to view the picture rapidly
turned on by pressing these buttons.
in reverse during the playback
mode.
1. STANDBY-ON
button
13. PAUSE F button (DVD/VCR)
(DVD/VCR)
Press to pause playback or
Press to turn on and off the unit.
recording.
2. DVD button
14. CHANNEL / + buttons
Press to activate the remote
(DVD/VCR)
control in DVD mode (refer to
• DVD mode
page 10).
Press to change the channel up
Press to select the DVD output
and down.
mode.
• VCR mode
3. VIDEO/TV button (DVD/VCR)
Press to change the channel up
Press to select VIDEO or TV
and down.
position.
Press to adjust the tracking during
4. VCR button
playback or in slow motion of the
videotape. Also while playback is
Press to activate the remote
in Still Mode, you can adjust the
control in VCR mode (refer to
picture blurred vertically.
page 10).
15. TIMER button (DVD/VCR)
Press to select the VCR output
Press to display the Timer
mode.
Programming list.
5. Number buttons (DVD/VCR)
Press to select channel numbers. 16. VCR REC I button (VCR)
Press to activate the remote
Press to select a title / chapter /
control in VCR mode (refer to
track on display.
page 10).
Also press to enter values for the
Press once to start a recording.
settings in the Setup menu.
Press repeatedly to start a OneAlso press to start the index/time
touch Timer Recording.
search in VCR mode.
17. TIMER SET button (DVD/VCR)
6. CLEAR/C-RESET button
Press to set the unit in the timer
(DVD/VCR)
standby mode. In the timer
• DVD mode
standby mode, press to cancel
Press to clear the password
the mode and to turn the unit on.
entered, to cancel the
18. SLOW button (VCR)
programming for CD, to clear
During playback, press to view
the highlighted marker number
the videotape in slow motion.
in the Edit menu or to clear the
program once entered in the Timer 19. SEARCH button (VCR)
Programming list, etc.
Press to call up the index or time
• VCR mode
search menu.
Press to reset the tape counter.
STANDBY-ON
Before you start
Functional overview (cont’d)
006/01/18 11:45:15
Before you start
Functional overview (cont’d)
Installing batteries in the remote control
Using a remote control
Install two “AAA” size batteries (supplied) matching
the polarity indicated inside battery compartment of
the remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
• The maximum operable ranges from the unit are
as follows.
-Line of sight: approx. 23 feet (7m)
-Either side of the center:
approx. 16 feet (5m) within 30°
-Above:approx. 16 feet (5m) within 15°
-Below: approx. 10 feet (3m) within 30°
1
2
3
Note:
Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe the
following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of
each battery match the indications in the battery
compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Within about
23 feet (7m)
POWER
ON
STANDBY
-ON
REW
F.FWD
STOP/EJE
CT
PLAY
RECORD
IR
OPEN/CL
OSE
CHANNEL
D.DUBBI
NG
VCR
SOURCE
DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
30°
30°
Remote
control
The VCR/DVD recorder switching
Because this product is a combination of a VCR and a DVD recorder, you must select first which component
you wish to operate with [SOURCE].
VCR MODE
Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)
OPEN/CLOSE
POWER ON
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
Note:
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
VCR SOURCE DVD
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
CLEAR/C-RESET
SPACE
DEF
9
TITLE
0
• Pressing only [SOURCE] on the front panel
DOES NOT switch the mode of the remote
control. You MUST select the correct mode on
the remote control.
• You cannot switch to another mode (DVD or
VCR) during in the timer-standby mode.
• Pressing [DVD REC I] or [VCR REC I] on the
remote control switches immediately its respective
mode so that you can start recording directly on
the appropriate media.
10
D.DUBBING
DVD button
VCR button
DVD MODE
Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)
CHANNEL
DVD indicator
SOURCE button
VCR indicator
RETURN
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR0V6_01.indd 10
006/01/18 11:45:16
Before you start
Guide to Displays On Screen menu
This unit uses the following On Screen menu for most operations: Setup menu and Title list, and Display menu.
They allow you to change the playing status of the disc during play.
The Display menu also gives you information on the status of the disc or a videotape.
Press [SETUP] to display the Setup menu, then press [OK] to display each menu, using [K / L].
These menus provide entries to all main functions of the unit.
Setup
Required Settings
Playback
Display
Recording
Clock
Channel
Disc Edit
1
2
3
4
3
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
Make Edits Compatible
Disc Edit
<Disc Edit menu (DVD-RW)>
Disc Edit
1
2
3
4
3
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
Finalize
Disc Edit
Edit Disc Name
Disc Protect OFF
ON
Finalize
CD Playback Mode
Random Play
Program Play
PBC (Video CD only)
ON
VCR functions
5
4
5
6
7
5
11
Others Español
EN
E9A80UD_MWR0V6_01.indd 11
Changing the
Setup menu
<CD Playback Mode menu>
Editing
1
2
3
4
Playing discs
<Disc Edit menu (DVD+R/DVD-R)>
Recording
1.Required Settings:
To set up the required settings.
2.Playback:
To set up the unit to play
discs as you prefer.
3.Display:
To set up the OSD screen
and the front panel display of
the unit as you prefer.
4.Recording:
To set up the unit to record
on discs or tapes as you
prefer.
5.Clock:
To set up the clock of the
unit as you need.
6.Channel:
To adjust the channel setting
of the unit as you prefer.
7.Disc Edit / CD Playback
Mode:
When a DVD-Video disc
(commercially available),
a blank disc, and DVD-R
formatted with other than
DVD+VR is inserted into the
unit, you cannot select “Disc
Edit”.
“CD Playback Mode” is
available only when an Audio
CD disc, a CD-RW/R disc
with MP3 files or a Video CD
is inserted into the unit.
1.Edit Disc Name:
Allows you to rename the
disc formatted with DVD+VR.
2.Disc Protect :
Allows you to protect a disc
from accidental editing or
recording.
3.Erase Disc (DVD+RW/DVDRW only):
Allows you to erase all
contents in the disc and
format it.
4.Make Edits Compatible
(DVD+RW only):
Allows you to make edits
possible to play discs in
other units after editing discs.
Finalize (DVD+R/DVD-RW/
DVD-R only):
Allows you to finalize a disc
containing recorded titles.
5.Random Play:
Allows you to activate the
random playback feature.
6.Program Play (Audio CD/
Video CD only):
Allows you to activate the
programmed playback
feature.
7.PBC (Video CD only):
Allows you to select images
or information on the menu
screen by activation PBC
(Playback control) function.
Getting started
1
2
3
4
5
6
7
<Disc Edit menu (DVD+RW)>
Connections
Setup menus
Before you start
Functional overview (cont’d)
006/01/18 11:45:18
Before you start
Functional overview (cont’d)
Display menu
DVD mode
First:
DVD
Press [DISPLAY] to call up the
Display menu. This menu will give
you the information on the disc.
Some operations are available
while disc is inserted in the unit.
1
4
1
1
0:00:00
DVD+RW
CH 8
Stereo
5
2
1.Indicates a disc type and a
format mode. (Format mode is
displayed with DVD-RW/DVD-R
(Video mode) discs inserted.)
NOTE: In some descriptions on
this manual, only one disc type
is indicated as an example.
2.Indicates a channel number and
audio status.
3.Indicates a recording mode and
possible recording time left.
4.Indicates a title number, chapter
number and the time lapse of
disc play.
5.Each icon means:
: Search
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
6.Indicates current disc status.
HQ(1Hr)
1:01
6
3
Note:
• This is an example screen only for explanation. Displayed items will change depending on the actual mode.
• DISPLAY function is not available when the disc is not inserted.
VCR mode
First:
VCR
Press [DISPLAY] to display the
On Screen display.
1
12:00AM
CH 21
Stereo
SP
0:00:00
HIFI
4
5
6
2
3
1.Indicates current video status.
2.Indicates the current time.
3.Indicates a current channel
number and an audio status of
the program.
4.Indicates a recording or playing
mode.
5.Indicates a Tape Counter.
6.Audio status of the current
videotape.
Note:
• This is an example screen only for explanation. Displayed items will change depending on the actual mode.
12
EN
E9A80UD_MWR0V6_01.indd 1
006/01/18 11:45:19
Before you start
Before you start
Functional overview (cont’d)
Front Panel Display Guide
4
2
1
Connections
3
7
6
5
1. Current Status of the unit
:Appears when playing
back a disc or a
videotape.
:Appears during repeat
playback (disc playback
only).
2. Disc type and Current status
of the unit
:Appears when an Audio
CD or a disc with MP3
files is on the disc tray.
:Appears when indicating a
chapter number.
5. Displays the following
• Played-back time
• Current title / chapter / track
number
• Recording time / remaining time
• Clock
• Channel number
• VCR tape counter
• Remaining time for a One-touch
Timer Recording
6.
:Appears in the afternoon
with the clock display.
7.
:Appears when the
progressive scan system is
activated.
:Appears during VCR to
DVD duplication process.
Changing the
Setup menu
:Appears when a Video CD
is on the disc tray.
:Appears when the Timer
Recording is proceeding
in VCR.
:Appears when VCR is
in the Timer Recording
standby mode.
:Flashes when a program
cannot be performed for
some reasons.
:Appears when indicating a
title/track number.
:Appears during DVD to
VCR duplication process.
Appears when the disc tray
is opening.
Appears when a disc is loaded
on the disc tray.
Appears when the disc tray
is closing.
Appears when data is being
recorded on a disc.
EN
13
Others Español
Appears when the PBC function
is activated. (Video CD playback
only. Refer to page 73.)
VCR functions
Display message
E9A80UD_MWR0V6_01.indd 13
Editing
:Appears when a videotape
is in the unit.
:Appears when a
DVD+RW/DVD-RW disc
is on the disc tray.
4. Title/Track and Chapter mark
Playing discs
:Appears during recording
process.
:Flashes when a recording
pauses.
:Appears when a DVD+R/
DVD-R disc is on the
disc tray.
Indicates the recording mode of a
videotape.
Recording
:Appears when the timer
programming or OTR has
been set and is proceeding.
Flashes when all Timer
Recordings have been
finished.
3. Recording mode
Getting started
:Appears when a disc or a
videotape play is paused.
:Appears when a DVD
disc is on the disc tray.
Appears when the Timer
Recording is proceeding
in DVD.
Appears when DVD is
in the Timer Recording
standby mode.
:Flashes when a program
cannot be performed for
some reasons.
006/01/18 11:45:
Connections
Connection to a TV
Antenna
(Back of TV)
Cable
TV signal
(Back of TV)
Antenna
Cable
TV signal
3
or
or
Connect
RF cable
(supplied)
4 Plug in the AC power
cord of this unit.
1
Disconnect
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
S-VIDEO
Y
L
COAXIAL
R
OUT
PB
/CB
IN
DVD/VCR
IN - AUDIO - OUT
L
L
R
R
ANTENNA
IN
2
IN - VIDEO - OUT
PR
/CR
OUT
Connect
(Back of this unit)
Choose one of the following connections, depending on the capabilities of the equipment you possess.
Basic Audio
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
TV
AUDIO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO IN
Y
PB/CB
PR/CR
Audio cable
(supplied)
This unit
<REAR PANEL>
Video cable
(supplied)
DVD/VCR
IN - AUDIO - OUT
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
S-VIDEO
Y
L
OUT
COAXIAL
R
PB
/CB
IN
L
L
R
Component video cable
(commercially available)
L
DVD/VCR
IN - AUDIO - OUT
R
S-Video cable
(commercially
available)
ANTENNA
IN
R
IN - VIDEO - OUT
PR
/CR
OUT
or
DVD
DVD/VCR
AUDIO
OUT
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
DVD/VCR
S-VIDEO IN - AUDIO - OUT
Y
L
OUT
COAXIAL
R
PB
/CB
PR
/CR
L
IN
R
L
DVD
S-VIDEO
DVD
COMPONENT
VIDEO OUT
Y
ANTENNA
IN
L
R
IN - VIDEO - OUT
OUT
IN - VIDEO - OUT
OUT
R
• These jacks are useful AUDIO OUT
only in DVD mode.
PB
/CB
PR
/CR
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• Method 2 and 3 are only useful in DVD mode.
• Although you can view images when using the connection Method 1 and 2 while Progressive Scan is
activated, they are in Interlace mode.
14
EN
E9A80UD_MWR0V6_01.indd 14
006/01/18 11:45:3
Connections
Before you start
Connection to a TV (cont’d)
AUX
Panasonic
TV/VIDEO
Curtis Mathis
LINE1, LINE2, 00, 90, 91, 92, 93
RCA
INPUT, TV/VCR, 00, 90, 91, 92, 93
GE
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung
TV/VIDEO
Hitachi
INPUT, AUX
Sanyo
VIDEO
JVC
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
Sharp
00
Kenwood
AUX
Sony
VIDEO1, VIDEO2, VIDEO3
LXI-Series
00
Toshiba
TV/GAME
Magnavox
AUX CHANNEL
Zenith
00
Getting started
Admiral
Connections
After you have completed connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Input Mode Names for Common TV Brands (Example)
Playing discs
Connection to a cable box or satellite box
Cable TV signal
(Back of this unit)
(Cable box or
Satellite box)
DVD/VCR
ANTENNA
IN
OUT
OUT
RF cable
(supplied)
Editing
IN
Recording
To set progressive scan mode, refer to page 71
• This unit is compatible with the Progressive Scan System. The feature provides you with the higher
definition images than the traditional output system does. To utilize this feature, you must set Progressive
Scan mode to “ON”.
E
(Back of TV)
Connection B
(Back of this unit)
1)Turn on this unit by pressing [STANDBY-ON ]. The “POWER ON” indicator on the front panel will light up.
Then, press [CHANNEL - / +] to select channel 3 or 4 (the(Cable
same channel
box or as the output channel of the cable
box or satellite box).
Satellite box)
•If noise appears
E
Cableon the TV screen, press [VIDEO/TV] on the remote control.
IN
•If you use the
channel 4, you will need to change this unit’s RFOUoutput
to channel 4. Refer to “RF output
Signal
T
switch” on page 80.
2)At the TV, select channel 3 or 4 (the same channel as you have selected at step 1). (Back of TV)
3)At the cable box or satellite box,RF
select
the (supplied)
channel you want to viewRF
or Cable
record.
Cable
Changing the
Setup menu
This connection allows you to view or record a scrambled channel. With this connection, channels cannot be changed
on this unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box.
•While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
DVD/VCR
ANTENNA
IN
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
EN
E9A80UD_MWR0V6_01.indd 15
15
Others Español
Note to the Cable TV System Installer :
VCR functions
OUT
006/01/18 11:45:3
Connections
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
AUDIO
Method 1
Method 2
Stereo system
Dolby Digital decoder,
MD deck or DAT deck
Analog audio
input jacks
AUDIO OUT
Digital audio
input jack
Audio Coaxial Digital cable
(commercially available)
Audio cable
(supplied)
This unit
<REAR PANEL>
COAXIAL
DVD
DIGITAL
AUDIO OUT
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
IN - AUDIO - OUT
L
R
or
DVD
AUDIO
OUT
L
R
Setting Setup>Playback>Disc Audio>Digital Out>
Connection
PCM
Dolby Digital
If output is Dolby Digital
encoded audio, connect to a
STREAM
Dolby Digital decoder.
Unless connected to a Dolby
PCM
Digital decoder.
Connecting to an MD deck or
DAT deck.
-
PCM
* To complete these settings, refer to pages 69-70.
Note
Note
• Playing back a DVD using incorrect settings
may generate noise distortion and may also
damage the speakers.
16
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multichannel surround sound as heard in the movie theaters.
• The audio source on a disc in a Dolby Digital Multichannel surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
EN
E9A80UD_MWR0V6_01.indd 16
006/01/18 11:45:4
Getting started
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
There are several types of recordable DVD discs to choose from.
This unit can record on the following type of discs.
Step 2: Turn on the
unit.
Remote Control
VIDEO/TV
VCR
DVD
Getting started
STANDBY-ON
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
Recording
0
For example, when you want to record repeatedly on the
same disc, select the rewritable DVD+RW/DVD-RW type disc.
When you want to save recordings without any alteration, a
non-rewritable DVD+R/DVD-R can be your choice.
DISPLAY
STANDBY-ON
Select the input
to
which
OK
DISC MENU
SETUP
the unit
is connected
on
VIDEO/TV
VCR
DVD OPEN/CLOSE
your TV.
ABC
1
2
GHI
JKL
CHANNEL
MNO
5
6
TUV
WXYZ
4
PQRS
3
8
7
DEF
9
TIMER VCR REC DVD REC REC MODE
Step 4: Select
the 0
recording mode.
OK
Step 3: Insert a blank disc.
1
STANDBY-ON
VIDEO/TV
VCR
DVD
CLEAR/C-RESET
TIMER SET SLOW
SEARCH
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
DISPLAY
AUDIO DUBBING
DISC MENU
ABC
.@/:
ABC
1
2
3
1
2
3
JKL
MNO
GHI
JKL
MNO
5
6
4
5
6
TUV
WXYZ
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
4
PQRS
CLEAR/C-RESET
8
9the
Select
SPACE
TITLE
DISPLAY
4
0
TIMER VCR REC DVD REC REC MODE
STANDBY-ON
DISPLAY
RETURN
TIMER SET SLOW
VIDEO/TV
VCR
OK
DISC MENU
DVD
OPEN/CLOSE
SEARCH
OK
SETUP
DISC MENU
.@/:
ABC
1
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
7
CHANNEL
SPACE
AUDIO DUBBING
SETUP
DEF
GHI
CLEAR/C-RESET
CM SKIP RAPID PLAY
9
TITLE
To close
VCR functions
CHANNEL
CHANNEL
To open
Changing the
Setup menu
0
RETURN
DVD mode
SETUP
DEF
GHI
7
3
DEF
Editing
.@/:
TITLE
CM SKIP RAPID PLAY
RETURN
2
OPEN/CLOSE
SPACE
0
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Loading
CM SKIP RAPID PLAY
RETURN
TIMER VCR REC DVD REC DISPLAY
REC MODE
TIMER
SET SLOW
Formatting
CM SKIP RAPID PLAY
90%
OK
SEARCH
AUDIO DUBBING
Playing discs
.@/:
Connections
Step 1: Choose a disc type.
Before you start
Easy DVD recording
AUDIO DUBBING SETUP
DVD+RW/DVD-RW
only
DISCSEARCH
MENU
HQ (1Hr)
0:58
This operation may take a while to be recognized.
TIMER VCR REC DVD REC REC MODE
Instructions continue on the next page.
TIMER SET SLOW
SEARCH
E9A80UD_MWR0V6_01.indd 17
CM SKIP RAPID PLAY
EN
17
Others Español
CHANNEL
AUDIO DUBBING
006/01/18 11:45:6
VIDEO/TV
Getting started
STANDBY-ON
Easy DVD recording (cont’d)
VIDEO/TV
VCR
DVD
VCR
DVD
.@/:
ABC
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
ABC
DEF
1
2
3
GHI
JKL
MNO
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
STANDBY-ON
Step 5: Select the
desired
3
1
2
channel.
VIDEO/TV
VCR
DVD
.@/:
ABC
GHI
JKL
OPEN/CLOSE
DEF
STANDBY-ON
4
VIDEO/TV
5
VCR
PQRS
MNO
DVD
TUV
7
8
.@/:
CLEAR/C-RESET
ABC
SPACE
1
2
0
OK
Step 7: Stop
the
recording.
DISC MENU
6
RETURN
DISPLAY
CHANNEL
9
DEF
TITLE
3
JKL
MNO
4
5
DISPLAY
PQRS
TUV
WXYZ
7
8
OK
SPACE
9
TITLE
0
SETUP
OK
DISC MENU
TIMER VCR REC DVD REC REC MODE
SETUP
6
RETURN
SETUP
WXYZ
GHI
CLEAR/C-RESET
DISPLAY
0
OPEN/CLOSE
RETURN
DISC MENU
Step 46: Record
5
6
on
DVD
8
9
7
disc.
DEF
PQRS
OPEN/CLOSE
.@/:
OPEN/CLOSE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
CHANNEL
DISPLAY
TIMER VCR REC DVD REC REC MODE
OK
DISC MENU
CHANNEL
Writing to Disc
SETUP
TIMER SET SLOW
SEARCH
90%
CM SKIP RAPID PLAY
AUDIO DUBBING
1
TIMER VCR REC DVD REC REC MODE
SP (2Hr)
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
TIMER SET SLOW
CM SKIP RAPID PLAY
2
CHANNEL
SEARCH
AUDIO DUBBING
EMPTY TITLE
1:41:17 SP (2Hr)
CH 12
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
This operation may take
a while to be completed.
AUDIO DUBBING
I
Hint 1: Play the recorded contents
You can select the title you want to play from a displayed title list, and
immediately start to play. Recorded contents are easily accessible, with
simple procedure of choosing a title on a chapter in the menu screen.
Start Rec.
Title 1
Stop/Start
Stop Rec.
Title 2
What are titles and chapters?
The contents of the DVD disc are generally divided into titles. Titles
may be further divided into chapters.
Hint 2: Edit the recorded disc
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Start Rec.
You will find editing discs is easy. This unit offers convenient edit functions
to discs formatted with
DVD+VR mode.
You can edit the following from a title list or setup menu.
• Deleting titles
• Putting names on titles
• Setting / Clearing chapter marks
• Hiding chapters
• Setting pictures for thumbnails
• Dividing a title (DVD+RW/DVD-RW only)
• Putting name on disc
Stop Rec.
Track 1 Track 2 Track 3 Track 4 Track 5
Finalizing a Disc
• This will allow DVD+R/DVD-RW/DVD-R discs recorded on this unit to be played back on a different DVD
player — without finalization it will not be playable on other units.
• After finalizing a disc, you cannot edit contents on that disc.
• DVD+RW discs is not required to finalize but to “Make Edits Compatible” to play on other units. You
can edit the disc after “Make Edits Compatible”.
18
EN
E9A80UD_MWR0V6_01.indd 18
006/01/18 11:45:7
Getting started
1
Press [STANDBY-ON
].
4
Press [OK] to start Channel
Preset.
The unit will start getting channels
available in your area.
Turn the TV on. Select the input
to which the unit is connected.
Refer to the table on page 15.
CH 1
DVD
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
DISPLAY
OK
DISC MENU
SETUP
After channel setting is finished,
“Clock Setting” will appear.
Then press [OK].
Getting started
3
4
English
1
DEF
RETURN
Initial Setup
Español
VCR
Auto Presetting Now
“Initial Setup” will automatically
appear.
Français
VIDEO/TV
Connections
2
STANDBY-ON
Before you start
Initial setting
Turn on this unit for the first time,
you need to follow these steps.
CHANNEL
TIMER VCR REC DVD REC REC MODE
Initial Setup
TIMER SET SLOW
CM SKIP RAPID PLAY
Clock Setting
AUDIO DUBBING
Recording
SEARCH
3
Using [K / L], select your
desired language On Screen
menu. Then press [OK] to set
language.
Initial Setup
Channel Preset
5
Playing discs
“Channel Preset” will automatically
appear.
Follow to step 3 to “Manual
Clock Setting” on page 23.
• If a Public Broadcasting Station
(PBS) is available in your area,
follow “Auto Clock Setting” on
page 22.
Editing
STANDBY-ON
VIDEO/TV
Channel setting
Getting channels
automatically
Setup
Required Settings
Playback
Display
Recording
Channel
Disc Edit
3
Using [K / L], select “Auto
Channel Preset”. Press [OK].
The unit will start getting channels
available in your area.
Wait for several minutes to finish
channel scanning.
4
Press [SETUP] to exit.
• You can select only the channels
memorized in this unit by using
[CHANNEL L / K] on the front
panel or [CHANNEL - / +].
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR0V6_01.indd 19
1
4
19
Others Español
Clock
Press [OK].
Channel menu will appear.
OPEN/CLOSE
VCR functions
1
Press [SETUP].
2
Using [K / L], select “Channel”.
DVD
ABC
Changing the
Setup menu
If you have changed antenna
connection, we recommend you
to program available channels
in your area with the following
procedures.
VCR
.@/:
006/01/18 11:45:8
Getting started
Channel setting (cont’d)
To select a channel
You can select a channel by directly entering channel using the Number buttons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.
(For example: 117, press [1], [1], [7])
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
• You can select the line input mode (“E1” or “E2”). To select “E1” by pressing [0], [0], [1]. To select “E2” by
pressing [0], [0], [2]. Details are on pages 35-36.
Note
• You cannot change the channel when one of the components of the unit (VCR or DVD) is in the recording,
OTR or Timer Recording mode.
• If the auto presetting is cancelled during presetting, some of the channels not yet preset may not be received.
• The selection will depend on how you receive the TV channels.
Press [RETURN] or [SETUP] to cancel the auto presetting during scanning.
Adding/deleting
channels
4
The channels you no longer
receive or seldom watch can
be deleted from the memory.
You also may add channels into
memory.
1
Select the channel number to
add or delete.
Press [{] or [CHANNEL -] to
move to a lower channel number.
Press [B] or [CHANNEL +] to
move to a higher channel number.
Press the Number buttons to
select a channel number directly.
Press [SETUP].
Manual Channel Preset
STANDBY-ON
VIDEO/TV
4
VCR DVD
2
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
Using [K / L], select “Channel”.
Press [OK].
Channel menu will appear.
CH 7
Add
Delete
3
Using [K / L], select “Manual
Channel Preset”. Press [OK].
Manual Channel Preset menu will
appear.
Manual Channel Preset
CH 2
Add
Delete
VCR DVD
5
2
3
4
5
Using [K / L], select “Add” or
“Delete”. Press [OK].
The channel number will be
added or deleted from the channel
memory. Then the next channel
number will appear so that you
can continue adding or deleting
channels.
DISPLAY
OK
DISC MENU
SETUP
1
6
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
4
AUDIO DUBBING
6
Press [SETUP] to exit.
Note
• [CHANNEL - / +] works on
the memorized channel in this
unit.
• [{ / B] works on all of
channel numbers.
20
EN
E9A80UD_MWR0V6_01.indd 0
006/01/18 11:45:9
Getting started
Before you start
Selecting the TV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has been
selected as the default.
1
Using [K / L], select “TV Audio
Select”. Press [OK].
Option window will appear.
TV Audio Select
2
STANDBY-ON
VCR DVD
VIDEO/TV
Stereo
VCR
.@/:
SAP
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
4
Using [K / L], select “Stereo” or
“SAP”. Press [OK].
2
3
4
DISPLAY
OK
DISC MENU
SETUP
1
5
Getting started
Using [K / L], select “Required
Settings”. Press [OK].
Required Settings menu will
appear.
DVD
Connections
Press [SETUP].
3
CHANNEL
Recording
Stereo:
Outputs main-audio.
SAP (Secondary Audio Program):
Outputs sub-audio.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
5
Playing discs
Press [SETUP] to exit.
Editing
Notes on TV channel audio
Selected
audio
Stereo
Disc (Videotape)
recording
Audio
output
STEREO
STEREO
STEREO
STEREO
STEREO
MONO+SAP
MONO
MONO
MONO
MONO
MONO
STEREO+SAP
SAP
SAP
STEREO
STEREO
STEREO
MONO+SAP
SAP
SAP
MONO
MONO
MONO
• You can only play the disc in second audio if a TV program is
available in second audio and you set “ TV Audio Select ” to “ SAP ”.
EN
E9A80UD_MWR0V6_01.indd 1
21
Others Español
STEREO+SAP
VCR functions
SAP
Broadcast
audio
Changing the
Setup menu
• When you record a TV program available in second audio or stereo,
you have to select either Stereo or SAP in “Required Settings”
beforehand. Refer to the following table to check an appropriate
setting.
006/01/18 11:45:9
Getting started
Setting the clock
Set the clock before you try the
Timer Programming. If a Public
Broadcasting Station (PBS) is
available in your area, follow “Auto
Clock Setting” below. If not, follow
“Manual Clock Setting” on page 23.
Auto Clock Setting
Make sure
• The antenna/Cable TV
connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box,
select the local PBS station
on them to set the clock
automatically.
4
• If you do not know your PBS
channel number:
Using [K / L], select “Auto”.
Press [OK].
The setting will be activated.
STANDBY-ON
VIDEO/TV
VCR
.@/:
• If you know your PBS channel
number:
Using [K / L], select
“Manual”. Press [OK].
Auto Clock Setting - Manual
VCR DVD
Set Channel No.
4
DVD
ABC
CH 1
1
Press [SETUP].
6
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
OPEN/CLOSE
2
3
4
DISPLAY
OK
DISC MENU
SETUP
1
5
CHANNEL
2
TIMER VCR REC DVD REC REC MODE
Using [K / L], select “Clock”.
Press [OK].
Clock menu will appear.
3
Using [K / L], select “Auto
Clock Setting”. Press [OK].
Option window will appear.
Auto Clock Setting
OFF
Auto
Manual
VCR DVD
Using the Number buttons
or [K / L], enter your PBS
channel number. Press [OK].
The setting will be activated.
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• If you want to set the clock
manually and cancel the Auto
Clock Setting function: Using
[K / L], select “OFF” in “Auto
Clock Setting”. Press [OK].
The Auto Clock Setting function
will be canceled.
5
Press [SETUP] to exit.
6
Press [STANDBY-ON ] to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the front panel display.
Note
• The clock may set itself
automatically after you
connect the antenna/cable
signal to this unit and plug in
the power cord. In this case,
the current time will appear
on the front panel display.
• If the current time is not
displayed or the displayed
clock is not correct, set the
clock manually.
22
EN
E9A80UD_MWR0V6_01.indd 006/01/18 11:45:30
Getting started
Before you start
Setting the clock (cont’d)
Manual Clock Setting
4
Using [K / L], enter the date
(month / day / year).
Press [{ / B] to move the cursor.
1
Press [SETUP].
Clock Setting
VIDEO/TV
VCR DVD
Using [K / L], select “Clock”.
Press [OK].
.@/:
JAN / 01 / 2006 ( SUN )
12: 00 AM
DEF
1
2
3
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
5
Using [K / L], enter the time
(hour / minute). Press [{ / B].
A cursor will move on AM.
Clock Setting
VCR DVD
2
3
4
5
6
DISPLAY
OK
DISC MENU
SETUP
1
7
CHANNEL
Recording
---- / -- / ---- ( ---- )
-- : -- --
VCR DVD
ABC
OPEN/CLOSE
GHI
PQRS
Using [K / L], select “Clock
Setting”. Press [OK].
Clock Setting menu will appear.
DVD
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
JAN/ 02 / 2006 ( MON )
12: 00 AM
Playing discs
Press [OK] again.
Default date will appear.
6
Editing
Press [K / L] to select “AM” or
“PM”. Press [OK].
The settings will be activated.
Although seconds are not displayed, they begin counting from
zero.
Changing the
Setup menu
7
Press [SETUP] to exit, if Clock
menu appears.
23
Others Español
EN
VCR functions
Note
• Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds when
you set the clock manually.
E9A80UD_MWR0V6_01.indd 3
Getting started
3
Clock Setting
VCR
Connections
2
STANDBY-ON
006/01/18 11:45:31
Getting started
Setting the clock (cont’d)
Setting the Daylight
Saving Time
3
When “Daylight Saving Time” is
“ON”, the unit clock will automatically move forward one hour on
the first Sunday in April and move
back one hour on the last Sunday
in October.
“ON” has been selected as the
default.
STANDBY-ON
Using [K / L], select “Daylight
Saving Time”. Press [OK].
Option window will appear.
Daylight Saving Time
ON
OPEN/CLOSE
ABC
DEF
1
2
3
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
4
Using [K / L], select “ON” or
“OFF”. Press [OK].
Choose “ON” when currently
utilizing the daylight saving time.
Using [K / L], select “Clock”.
Press [OK].
Clock menu will appear.
DVD
GHI
PQRS
OFF
4
2
VCR
.@/:
VCR DVD
1
Press [SETUP].
VIDEO/TV
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
1
5
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
5
Press [SETUP] to exit.
Selecting the TV aspect ratio
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected
as the default.
3
STANDBY-ON
Using [K / L], select “TV
Aspect”. Press [OK].
Option window will appear.
TV Aspect
VIDEO/TV
DVD
2
Using [K / L], select “Required
Settings”. Press [OK].
Required Settings menu will
appear.
Refer to the Note on this page.
4
Using [K / L], select a desired
option. Press [OK].
5
Press [SETUP] to exit.
DEF
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
16:9 Wide
2
OPEN/CLOSE
1
4:3 Pan & Scan
Press [SETUP].
24
DVD
ABC
PQRS
4:3 Letter Box
1
VCR
.@/:
RETURN
2
3
4
DISPLAY
OK
DISC MENU
SETUP
1
5
CHANNEL
Note
If you have a standard TV:
Select “4:3 Letter Box”, so
that black bars appear on the
top and bottom of the screen.
Select “4:3 Pan & Scan” for
a full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR0V6_01.indd 4
006/01/18 11:45:31
Recording
Information
Recording mode
This unit can record to DVD+RW/DVD-RW/DVD+R/
DVD-R discs.
DVD+R/DVD-R discs can only be recorded to once.
DVD+RW/DVD-RW discs can be recorded to and
erased many times.
These discs are formatted with DVD+VR mode
automatically.
Discs other than DVD+VR mode cannot be recorded
in this unit.
You can select a recording mode among 6 options,
and the recording time will depend on the recording
mode you select as follows.
8cm Disc
Attributes
36 min
SPP (2.5Hr)
45 min
LP (3Hr)
54 min
(good)
EP (4Hr)
72 min
SLP (6Hr)
108 min
(poor)
HQ (1Hr)
60 min
(good)
SP (2Hr)
120 min
EP (4Hr)
240 min
SLP (6Hr)
360 min
(poor)
Recording
• The recording time are estimates and actual
recording time may differ.
• The audio and video quality is getting poorer as
the Recording time becomes longer.
• Each time [REC MODE] is pressed, recording
mode and its allowed recording time will be
displayed.
Playing discs
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
18 min
SP (2Hr)
12cm Disc SPP (2.5Hr) 150 min
LP (3Hr) 180 min
DVD+R
DVD-RW
HQ (1Hr)
Getting started
8cm/12cm, single-sided, single layer disc
DVD+RW Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
Recording Recording Video/Sound
Quality
mode
time
Connections
Logo
Disc Size
DVD-R
Note
Recordable disc
Others Español
E9A80UD_MWR0V6_01.indd 5
25
VCR functions
EN
Changing the
Setup menu
• This recorder cannot record CD-RW or CD-R
discs.
• DVD+RW/R, DVD-RW/R and CD-RW/R discs
recorded on a personal computer or a DVD or
CD recorder may not play if the disc is damaged
or dirty or if there is dirt of condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format, there
are cases in which it may not play because of the
settings of the application software used to create
the disc. (Check with the software publisher for
more detailed information.)
• DVD-RW/R discs recorded in Video mode cannot be
recorded additionally using the unit.
• Since the recording is made by the variable bit rate
(VBR) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the OSD.
• You cannot record copy-protected video using
this unit. (Copy-protected video includes DVDVideo discs and some satellite broadcasts.)
• You cannot record videos that includes “copyonce only” signal.
Editing
• We strongly recommend for good recording
quality:
SONY DVD+RW 4x
TDK DVD+R 4x/8x/16x
SONY DVD+R 4x/8x/16x
MAXELL DVD+R 4x/8x/16x
MAXELL DVD-RW 4x
MAXELL DVD-R 8x/16x
• DVD+RW 1x-4x, DVD+R 1x-16x, DVD-RW 4x and
DVD-R 8x/16x discs can be used in this recorder.
• Discs that have been tested and are proven to be
compatible with this recorder:
VERBATIM DVD+RW 4x VERBATIM DVD+R 8x
VERBATIM DVD-RW 2x VERBATIM DVD-R 8x
JVC DVD-RW 4x
MAXELL DVD-R 16x
• You can play DVD+RW in most DVD players
without finalizing. To play discs other than
DVD+RW in other DVD players, you will need to
finalize.
Before you start
Information on DVD recording
006/01/18 11:45:3
Recording
Information on DVD recording (cont’d)
Making discs playable in other DVD player (Finalize/Make Edits Compatible)
After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to
page 37.)
There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 65) for playing on
other units after editing.
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
DVD+RW
Editing titles
DVD+R
DVD-RW/DVD-R
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
Playable
OPEN/CLOSE
POWER ON
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
This Unit
CHANNEL
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
DVD player
Not Playable
Not finalized
Not performing Make Edits Compatible after editing titles
ᵈᵷᶍᶓᴾᶁᵿᶌᶌᶍᶒᴾᶄᶇᶌᵿᶊᶇᶘᶃᴾᶍᶐᴾᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᴾᶇᶌᴾᶍᶒᶆᶃᶐᴾᵢᵴᵢᴾᶐᶃᶁᶍᶐᶂᶃᶐᶑᵌ
• Once DVD+R/DVD-RW/DVD-R discs are finalized, you cannot record additionally or edit.
• You cannot record additionally or edit on finalized DVD-RW discs unless the DVD-RW discs are performed
“Undo Finalize”.
26
EN
E9A80UD_MWR0V6_01.indd 6
006/01/18 11:45:3
Recording
Before you start
Before recording
Replacing disc menu
STANDBY-ON
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
VIDEO/TV
Using [K / L], select “Replace
Disc Menu”. Press [OK].
Option window will appear.
Replace Disc Menu
DVD
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Connections
0
ON
RETURN
OFF
2
3
4
1
Press [SETUP].
DISPLAY
OK
DISC MENU
SETUP
1
5
CHANNEL
2
4
TIMER VCR REC DVD REC REC MODE
Using [K / L], select “ON” or
“OFF”. Press [OK].
ON: Replacing the title list
OFF:Prohibiting additional record
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Recording
Using [K / L], select
“Recording”. Press [OK].
Recording menu will appear.
5
Press [SETUP] to exit.
Playing discs
STANDBY-ON
VIDEO/TV
Setting for Auto Chapter
DVD+RW
DVD+R
+VR
DVD-RW
Option window will appear.
DVD-R
DVD
You can set a specified time for
chapter marks.
“10 minutes” has been selected as
the default.
10 minutes
15 minutes
30 minutes
60 minutes
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [OK].
Using [K / L], select “Auto
Chapter”. Press [OK].
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
2
3
4
DISPLAY
OK
DISC MENU
SETUP
1
5
CHANNEL
4
TIMER VCR REC DVD REC REC MODE
Using [K / L], select a desired
time option. Press [OK].
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
5
Press [SETUP] to exit.
Note
EN
E9A80UD_MWR0V6_01.indd 7
27
Others Español
• The interval for auto chapter
marks may slightly deviate
from the one you specified on
the Auto chapter screen.
• A blank chapter may be
created depending on the
remaining time of the disc.
VCR functions
3
OPEN/CLOSE
Changing the
Setup menu
1
DVD
ABC
0
OFF
5 minutes
VCR
.@/:
Editing
Auto Chapter
+VR
Getting started
It can be used to prohibit recording
additionally or to replace the title
list after recording when inserting
the disc includes titles and a
different type of title list recorded
by other units. “OFF” has been
selected as the default.
3
006/01/18 11:45:33
Recording
Basic recording
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
Follow the steps below to record
TV programs.
6
Using [CHANNEL - / +] or
the Number buttons, select a
desired channel to record.
CH 12
1
Press [STANDBY-ON ].
Turn the TV on and be sure to
select the input to which the unit is
connected.
Press:
DVD
2
6
disc
tray
guide
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
OK
DISC MENU
SETUP
CHANNEL
8
2
4
DISPLAY
7
Press [PAUSE F] to pause
recording. Press [PAUSE F] or
[DVD REC I] again to restart
recording.
1
0
Press [DVD REC I] to start
recording.
“I” mark will be displayed for 5
seconds.
I
Insert your disc with its label facing up. Align the disc to the disc
tray guide.
VIDEO/TV
7
Press [OPEN/CLOSE A].
The disc tray will open.
3
STANDBY-ON
6
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
7
CM SKIP RAPID PLAY
AUDIO DUBBING
4
8
5
Press [STOP C] to stop recording.
The recorded title will be on the
displayed title list. (Refer to “Guide
to a title list” on page 54.)
4
Press [OPEN/CLOSE A] to close
the disc tray.
• When inserting a brand-new
DVD+RW/DVD-RW disc, the unit
automatically starts to format.
• If titles have been recorded on
the disc, the title list is displayed.
Press [STOP C] to exit the title
list.
Writing to Disc
90%
1
SP (2Hr)
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
2
EMPTY TITLE
1:41:17 SP (2Hr)
This operation may take a
while to be recognized.
5
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 25.
HQ (1Hr)
28
0:58
• Press [STOP C] to exit the title
list.
Note
• The portion bar in the light
side of the title list may not
indicate the precise position
of the disc.
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
will be blank.
• When you record a TV
program which has Stereo
and SAP audio, you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel
audio will be recorded. Refer
to “Selecting the TV stereo
or SAP” on page 21 for more
details.
• You cannot change the
recording mode during the
REC pause mode.
• You can change a channel
during the REC pause mode.
EN
E9A80UD_MWR0V6_01.indd 8
006/01/18 11:45:34
Recording
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
STANDBY-ON
VIDEO/TV
VCR
.@/:
3
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
1
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
OK
DISC MENU
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
4
0:30
CHANNEL
(Normal Recording) 1:00
TIMER VCR REC DVD REC REC MODE
8:00
7:30
TIMER SET SLOW
SEARCH
2
3
Using [CHANNEL - / +] or
the Number buttons, select a
desired channel to record.
CM SKIP RAPID PLAY
3
2
AUDIO DUBBING
When the unit reaches the
specified time, it will be turned off
automatically.
Playing discs
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 25.
SETUP
0:30
To change the recording length
during the One-touch Timer
Recording, press [DVD REC I]
repeatedly until the desired length
appear.
Editing
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C] .
This operation may take a
while to be completed.
Others Español
29
VCR functions
EN
Changing the
Setup menu
Note
• The remaining recording time will appear on the display panel during a One-touch Timer Recording,
press [DISPLAY] to see the remaining recording time on the TV screen.
• You cannot pause a One-touch Timer Recording.
• Unlike a Timer Recording, you can perform the following operations during a One-touch Timer Recording.
-Turning the power off.
-Using [DVD REC I] and [STOP C].
• The unit will be turned off automatically under the following conditions.
1) No space remained on the disc.
2) When a power failure occurs.
• If OTR is finished in DVD during playback or REC mode in VCR, the DVD will be in STOP mode and the
VCR keeps the current mode.
• When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a
Timer Recording has been programmed. Press [TIMER SET] to cancel the standby mode for using the unit
continuously.
E9A80UD_MWR0V6_01.indd 9
Recording
This operation may take a
while to be recognized.
I
Getting started
1
Press [DVD REC I] repeatedly
to select desired recording time.
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby mode.
First:
DVD
4
Before you start
One-touch Timer Recording (OTR)
006/01/18 11:45:35
Recording
Timer Recording
VR
DVD-RW
DVD+R
DVD+RW
+VR
VCR
DVD-R
You can program the unit to record
up to 8 programs within a month in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
setting a timer programming.
• Insert a recordable disc or a
videotape with a record tab.
1
Press [TIMER].
Timer Programming list will appear.
Timer Programming
Date
2
1.
---
2.
---
3.
---
4.
---
5.
---
6.
---
Start
End
CH
Using [K / L], enter the Date.
Press [B].
Timer Programming
2.
---
3.
---
4.
---
Timer Programming
Date
End
CH
--:--
--:--
E1 DVD
DVD
VCR
6
--When
pressing [L] at the
6.
--current
date, the Date will
7.
--8.
--change as follows.
e.g. January 1st
JAN/01
---
3.
---
4.
---
7.
---
8.
---
Date
2.
---
Start
3.
---
4.
---
JAN/31
4
Using [K / L], enter the Start
and End time. Press [B].
Timer Programming
-----
5.
---
6.
---
307.
8.
---
8
DVD
VCR DVD
Start
End
CH
12:57AM
--:--
E1 DVD
DVD
VCR
Mode
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
• “VCR” will appear
Timer
4
5 if VCR
6
Recording have been set.
0
RETURN
DISPLAY
Mode
OK
DISC MENU
1
8
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
Using [K / L], select a recording
mode.
Timer Programming
Date
Start
1. JAN/01 12:57AM
2.
---
3.
---
4.
---
1:57AM
CH
DVD
VCR
Mode
8
DVD
HQ
When “Auto” (DVD only) is
selected as a recording mode, the
unit determines how much time is
available on the disc and record in
the appropriate recording mode to
complete recording the program.
Start
2.
---
3.
---
4.
---
5.
---
6.
---
9
VCR DVD
End
Refer
to “Recording mode” on
5.
--6. 25
--page
for DVD or page 74 for
7.
--VCR.
8.
---
8
SUN
4.
CH
7
MON-FRI
3.
End
1:57AM
DVD
VCR
Timer Programming
FRI
VIDEO/TV
VCR DVD
• To
on a videotape, select
5. record
--6.
--VCR.
7.
--• To
record
on a disc, select DVD.
8.
---
Date
SAT
---
DVD
will appear on the front panel
display.
DVD RW
1. JAN/01 12:57AM
2.
8
Mode
Press [TIMER SET] to set a
Timer Programming.
STANDBY-ON
1. JAN/01 12:57AM
MON-SAT
1. JAN/01
DVD
VCR
Timer Programming
Daily
Date
1:57AM
CH
Using [K / L], select a recording
media. Press [B].
Mode
5.
2.
VCR DVD
End
9
To 5.record
from external input,
--6.
--select
E1 or E2.
VCR DVD
Start
Start
1. JAN/01 12:57AM
Mode
3
1. JAN/01
Using [K / L], select the channel
number to record. Press [B].
VCR DVD
DVD
VCR
Using
7.
---[K / L], select a program
8.
--number.
Press [OK].
Date
5
VCR DVD
End
1:57AM
CH
8
DVD
VCR
Mode
DVD Auto
7.
---[OK] when information is
Press
8.
--entered.
Your program setting will be stored.
• To set another program, repeat
steps 2 to 8.
• To exit, press [TIMER] or
[SETUP].
• When programs are overlapped,
“Overlap” and the overlapped
program numbers will appear on
the TV screen.
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
2
3
4
5
6
7
8
Note
• If you have not set the clock
yet:
A manual clock setting menu
will appear instead of the
Timer Programming list at
step 1. Continue with step 3
in “Manual Clock Setting” on
page 23 before setting a timer
programming.
• Press [{ / B] to move the
cursor to the left and the right
in the timer programming list.
• After step 9, you can use the
other component (VCR or
DVD) which is not currently
programmed by turning the
power on. Note that the
programmed device will start to
capture the selected channel
2 minutes before the start time
and at the moment, if the other
device still stays in recording,
recording pause or OTR mode
turning a different channel, the
current mode will be canceled
and you cannot change the
channel. When both devices
capture the same channel,
the current mode continues to
function.
EN
---
E9A80UD_MWR0V6_01.indd 30
006/01/18 11:45:37
Recording
STANDBY-ON
Checking, canceling, or correcting the timer programming
information
2
Press [TIMER].
Timer Programming list will appear.
.@/:
Start
1. JAN/01 12:57AM
2.
---
3.
---
4.
---
5.
---
6.
---
7.
---
VCR DVD
End
1:57AM
CH
8
DVD
VCR
Mode
DVD
HQ
To clear the timer programming:
Using [K / L], select your
desired program. Press [CLEAR/
C-RESET].
To correct the timer programming:
Using [K / L], select your
desired program. Press [OK].
Next, correct the timer
programming by using
[K / L / { / B].
Finally, press [OK] again.
5
Press [TIMER] to exit.
6
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
4
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
2
5
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
1
6
AUDIO DUBBING
Press [TIMER SET] to return to
the timer standby mode.
Note
Timer Programming
Date
*
Start
VCR DVD
End
JAN/01 12:57AM 1:57AM
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
DVD
VCR
8
DVD
Mode
E22
E1-22
E37-39
E23-24
E25-26
E29
E30
Recording error other than
below
Unrecordable disc
Copy prohibited program
Disc protected
Disc full
E34
No space for Control
information
E35
E36
E40
E41
Power failed
E42
No disc when recording
E43
Already 49 titles recorded
E44
Already 254 chapters
recorded
Copy prohibited program
It is impossible to record
additionally on a disc
recorded by other units
when setting Replace Disc
Menu to OFF.
E45
E46
PCA full
Already finalized Video
format disc
Some portion has not
been recorded because
of program overlapping.
Recording did not start at the
start time.
• A program with the error number is grayed and asterisked in the Timer Programming list.
• Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be cleared.
EN
E9A80UD_MWR0V6_01.indd 31
31
Others Español
• E27, E28, E31, E32 and E33 are not displayed.
VCR functions
Press [CLEAR/C-RESET] to
erase the selected program.
Each error number means:
Changing the
Setup menu
2.
CH
Editing
To stop the Timer Recording in process
Press [STOP C] to stop the disc recording or [STOP C / EJECT A]
to stop the videotape recording on the front panel of the main unit.
[STOP C] on the remote control is not effective.
If the timer program did not complete correctly, the error number
appears in the Timer Programming list.
Playing discs
• Press [TIMER] to check the Timer Recording in process.
- When the Timer Recording is in progress, that program will be highlighted in red.
- While using the side of the unit that is free from Timer Recording (either DVD or VCR) during timer standby
mode, no programs will be highlighted even if you press [TIMER] to confirm the program information. In this
case, you cannot select other program either for correction or add any new programs.
• The unit will be turned on automatically before the recording time.
Recording
Check
8.
---the information on the
list you will need.
DVD
Getting started
Timer Programming
Date
VCR
Connections
Press [TIMER SET].
disappears from the front
panel display.
3
VIDEO/TV
4
1
Before you start
Timer Recording (cont’d)
006/01/18 11:45:38
d
sc.
l
ed
Recording
Timer Recording (cont’d)
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings
will be lost.
• If a recordable disc is not on the tray or an unrecordable disc is on the tray, “DVD” on the front panel display flashes and
Timer Recording cannot be performed. In some cases, “DVD” flashes momentarily around the Timer starting time as the unit
attempts to record. Please insert a recordable disc.
• If a videotape with a record tab is not in the cassette compartment or there is no videotape in the compartment, “VCR” on the
front panel display flashes and timer recording cannot be performed. Please insert a recordable videotape.
disappears. In this
• If you press [STANDBY-ON ] and turn on the unit while either DVD or VCR is in timer standby mode,
case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.
• After step 9 on page 30, you can turn on the power to use the side of the unit that is free from Timer Recording (either
DVD or VCR) for another recording by pressing [STANDBY-ON ] during timer standby. During Timer Recording, press
[SOURCE] on the front panel, or [DVD] or [VCR] on the remote control. Note that you cannot change channels after Timer
Recording started. You can use all recording/recording pause/OTR functions. However, the unit will begin receiving channel
signals for Timer Recording 2 minutes before the programmed starting time. Unless the program that you are currently
recording using the Timer Recording free side of the unit is on the same channel with the one programmed for Timer
Recording, the unit prioritizes Timer Recording and the current recording will be automatically stopped. If the channels set for
Timer recording and the current recording are same, the current recording will continue without interruption.
flashes. To play or eject the recorded disc, press [STANDBY-ON ] first,
• When all the Timer Recording is completed,
and then press [PLAY B] or [OPEN/CLOSE A].
• If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Timer
Recording. If you want to use functions other than recording under such condition, cancel Timer Recording by pressing
[TIMER SET] during timer standby or stop recording by pressing [STOP C] on the front panel during Timer Recording.
• When the starting and ending time are same, the recording will be set for 24 hours. When the disc or tape reaches the end
during the recording, the unit turns itself off. If you want to continue the recording, cancel timer standby by pressing
[TIMER SET], insert a new disc or tape, and then press [TIMER SET] again. If you are recording on a tape, the unit
automatically ejects the tape when it reaches the end. You can continue the recording by inserting a new tape.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be
cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [TIMER SET].
• The Timer Recording cannot be performed in DVD and VCR at the same time. If you set two programming with the same
channel and time in both units, the program with a lower program number will be recorded.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer programming
set previously has priority.
A Timer Recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming
A programming
set previously
set previously
has priority
has priority
When theWhen
starting
the time
starting
is the
time
same:
is the same:
A program
A program
set previously
set previously
(PROG. A)
(PROG.
has priority.
A) has priority.
When some
When
programming
some programming
have been
have
made
been
atmade at
the end the
timeend
of the
time
programming
of the programming
currentlycurrently
being recorded:
being recorded:
A program
A program
set previously
set previously
(PROG. B)
(PROG.
has priority.
B) has priority.
PROG. A PROG. A
PROG. A PROG. A
PROG. B PROG. B
PROG. B PROG. B
PROG. C PROG. C
Actual Actual
recordingrecording PROG. A PROG. A PROG. B PROG. B
The first 30
The
seconds
first 30 (at
seconds
the longest)
(at thewill
longest)
be cutwill
off.be cut off.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
Actual Actual
recordingrecording PROG. A PROG. A PROG. B PROG. B
The first 30
The
seconds
first 30 (at
seconds
the longest)
(at thewill
longest)
be cutwill
off.be cut off.
When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A
PROG. A
PROG. B
PROG. B
Actual
PROG.B
PROG.A
recording
The first 30 seconds (at the longest) will be cut off.
Actual
recording
Note for DVD recording
• When the recording time of two programs are overlapped, or the
End time of a program and the Start time of another is the same,
the first 30 seconds (at the longest) of the subsequent program
will be cut off.
• If the cut-off portion comes up to one minute or more, this
program will be displayed with error number E40 in the timer
programming list.
PROG. B
When the End time of the programming
currently being recorded and the Start time
of the subsequent program are same:
If PROG. A is a DVD recording program, the
beginning of the PROG. B may be cut off.
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
The first 30 seconds (at the longest) will be cut off.
32
EN
E9A80UD_MWR0V6_01.indd 3
006/01/18 11:45:39
Recording
Overwriting from the beginning of the title
+VR
DVD-RW
DVD+RW
Play
Edit
Overwrite
You can overwrite the existing title
from the beginning.
VIDEO/TV
DVD
OPEN/CLOSE
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
.@/:
1
2
3
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
EMPTY TITLE
3:15:44 EP(4Hr)
ABC
PQRS
5
DEF
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
Using [K / L], select
“Overwrite”. Press [OK].
Channel can be changed.
2
Selected title number
to be overwritten
1
1
0:00:00
DISPLAY
4
5
OK
DISC MENU
SETUP
DVD+RW
TIMER VCR REC DVD REC REC MODE
SP (2Hr)
TIMER SET SLOW
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
SEARCH
2
CM SKIP RAPID PLAY
AUDIO DUBBING
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
3
I
EMPTY TITLE
1:37:52 SP(2Hr)
3
4
Using [K / L], select a title to be
overwritten. Press [OK].
6
Press [DVD REC I].
Overwriting recording starts.
The elapsed-time counter starts
running.
7
Press [STOP C] to stop
recording.
Title name is also overwritten.
This operation may take a
while to be recognized.
Note
VIDEO/TV
You can overwrite the existing title
from the selected position.
1
Proceed to steps 1 to 2 above.
Using [K / L], select a title to be
overwritten. Press [OK].
3
4
Press [PAUSE F] at the point
from which you want to start
overwriting.
E9A80UD_MWR0V6_01.indd 33
.@/:
ABC
DEF
GHI
JKL
MNO
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
5
DISPLAY
2
3
OK
DISC MENU
Press [DVD REC I].
“FI” mark, Display menu, CH, and
the time lapse will be displayed as
stated above.
Channel can be changed.
4
SETUP
TIMER VCR REC DVD REC REC MODE
6
TIMER SET SLOW
Press [DVD REC I] again.
Overwriting recording starts.
7
Press [STOP C] to stop
recording.
Title name is not overwritten.
This operation may take a
while to be recognized.
7
CHANNEL
SEARCH
5
6
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Recording mode of the
overwriting title is the
same as that of the original
(overwritten) title when
overwrititng in the middle of
the title.
EN
33
Others Español
Using [K / L], select “Play”.
Press [OK].
Playback will start.
OPEN/CLOSE
VCR functions
2
DVD
Changing the
Setup menu
+VR
DVD-RW
VCR
PQRS
Overwriting in the middle of the title
DVD+RW
STANDBY-ON
• Remaining time, which is
displayed on the bottom right
corner of the screen during
3
1
2
overwriting,
indicates
the
remaining4 time5 at the
time of
6
starting overwriting.
Editing
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 25.
2:00
Playing discs
This operation may take a
while to be recognized.
SP(2Hr)
Recording
7
3
6
CHANNEL
CH 12
1
VCR
Getting started
Load the disc that includes a
title to be overwritten.
Title list will appear.
If the title list does not appear,
press [DISC MENU].
1
STANDBY-ON
Connections
2
SP (2Hr)
2
1
Press [STANDBY-ON ]
Make sure that the TV input is set
on the unit.
Press:
DVD
1
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
Before you start
Overwriting an existing title
006/01/18 11:45:40
Recording
Overwriting an existing title (cont’d)
Hints for Overwriting
When an existing title is overwritten, the title name may be changed according to the overwriting situations.
Before overwriting, read the following cases and Note.
When overwriting title is shorter than the existing title:
(Overwriting from the beginning of the title)
Overwriting Title (A)
Title name: A
Existing Title (B)
Title name: B
After overwriting
PROG. A
Title name: A
Title name: B
30 - 180 seconds will be cut off.
When overwriting title is longer than the existing title:
(Overwriting from the beginning of the title)
Overwriting Title (A)
Title name: A
Existing Title (B)
Title name: B
After overwriting
PROG. A
Title name: A
Overwriting Title (A)
Title name: A
Existing Title (B)
Title name: B
Existing Title (C)
After overwriting
Title name: C
PROG. A
Title name: C
Title name: A
30 - 180 seconds will be cut off.
When overwriting in the middle of the title:
Overwriting Title (A)
Title name: A
Existing Title (B)
Title name: B
After overwriting
Title name: B
Other title name
30 - 180 seconds will be cut off.
34
Note
• When a title name is overwritten,
its thumbnail is also overwritten.
• When existing title is longer than
overwriting title, overwriting title is
divided into 2 titles. If this is the
case, there may be an unrecorded
portion between titles.
• A chapter mark is put between titles
when overwriting in the middle of
the title.
• “Auto Chapter” interval time is reset
at the overwriting start point.
EN
E9A80UD_MWR0V6_01.indd 34
006/01/18 11:45:41
Recording
Before you start
Settings for an external source
Connection to an external source
+VR
DVD+R
DVD+RW
+VR
DVD-RW
VCR
DVD-R
Another source
(VCR camcorder etc.)
OUTPUT
S- VIDEO
VIDEO AUDIO
L
R
OUTPUT
S- VIDEO
R
Getting started
or
Video
cable
S-Video
cable
Audio
cable
or
S-VIDEO
VIDEO AUDIO
L
or
S-Video
cable
Connections
Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear).
When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front).
Use commercially available S-Video or Video cable and an Audio cable for this connection.
Video
cable
Audio
cable
DVD/VCR
IN - AUDIO - OUT
DVD/VCR
S-VIDEO
L
L - AUDIO - R
VIDEO
To EXT 2 IN
Recording
R
IN
IN - VIDEO - OUT
To EXT 1 IN
OPEN/CLOSE
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
S-VIDEO
Y
POWER ON
DVD/VCR
IN - AUDIO - OUT
L
L
R
R
ANTENNA
IN
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
CHANNEL
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
L
R
COAXIAL
R
OUT
PB
/CB
IN
IN - VIDEO - OUT
PR
/CR
OUT
Rear of this unit
Playing discs
Front of this unit
1.Press [SETUP].
2.Using [K / L], select “Required Settings”. Press [OK].
3.Using [K / L], select “Video Input”. Press [OK].
Video Input
Video In
E2 (Front)
Video In
4.Using [K / L], select “E1 (Rear)”. Press [OK].
Video Input - E1 (Rear)
Video In
Video In
S-Video In
S-Video In
Video Input
VCR DVD
VCR DVD
5.Using [K / L], select the input jack type to
connect. Press [OK].
If you want to use S-VIDEO IN jack, select “SVideo In”.
If you want to use VIDEO IN (Composite) jack,
select “Video In”.
Video Input
VCR DVD
Video In
E1 (Rear)
S-Video In
E2 (Front)
S-Video In
E2 (Front)
Video In
6.Press [SETUP] to exit.
EN
E9A80UD_MWR0V6_01.indd 35
35
Others Español
E1 (Rear)
6.Press [SETUP] to exit.
VCR functions
5.Using [K / L], select the input jack type to
connect. Press [OK].
If you want to use S-VIDEO input jack, select “SVideo In”.
If you want to use VIDEO input (Composite) jack,
select “Video In”.
Changing the
Setup menu
VCR DVD
Editing
E1 (Rear)
4.Using [K / L], select “E2 (Front)”. Press [OK].
Video Input - E2 (Front)
VCR DVD
006/01/18 11:45:43
Recording
Settings for an external source (cont’d)
Recording from an external source
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
VCR
This operation may take a while to be recognized.
VCR
When you want to record to a videotape:
Press:
Insert the videotape with a record tab into the cassette
compartment.
4.Select the input of the unit which the external equipment is
connected. (E2 or E1)
• To use the input jacks on the back of this unit, select “E1” position by
pressing [0], [0], [1] with the Number buttons or using
[CHANNEL - / +] on the remote control, or [CHANNEL L / K] on the
front panel.
• To use the input jacks on the front of this unit, select “E2” position by
pressing [0], [0], [2] with the Number buttons or using
[CHANNEL - / +] on the remote control, or [CHANNEL L / K] on the
front panel.
5.Select a recording mode by pressing [REC MODE].
Refer to “Recording mode” on page 25 for DVD or page 74 for VCR.
6.Press [DVD REC I] ([VCR REC I]) on the remote control or
[RECORD I] (DVD/VCR) on the front panel to start recording.
7.Press “Play” on the external source to record from.
8.For disc:
Press [STOP C] on the remote control or on the front panel to stop
recording.
This operation may take a while to be completed.
For videotape:
Press [STOP C] on the remote control or [STOP C / EJECT A] on
the front panel to stop recording.
VIDEO/TV
4
VCR
DVD
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
DISPLAY
OK
DISC MENU
SETUP
8
CHANNEL
SEARCH
6
CM SKIP RAPID PLAY
AUDIO DUBBING
23
OPEN/CLOSE
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
+VR
Confirmation window will appear.
DVD-R
Disc Protect OFF
To prevent accidental recording,
editing or erasing the titles, you
can protect them from the Setup
menu.
1
Press [SETUP].
2
Using [K / L], select “Disc Edit”.
Press [OK].
Disc menu will appear.
3
Using [K / L], select “Disc
Protect OFF
ON”. Press
[OK].
36
CHANNEL
IR
86
ON
Yes
No
VCR
.@/:
DVD
VCR SOURCE DVD
STOP
PLAY
RECORD
ABC
4
DEF
3
1
2
JKL
4
5
6
TUV
WXYZ
PQRS
VIDEO
L
AUDIO
OPEN/CLOSE
GHI
MNO
7
8
9
CLEAR/C-RESET
SPACE
TITLE
86
0
2
3
4
DISPLAY
OK
DISC MENU
Note
4
D.DUBBING
S-VIDEO
VIDEO/TV
RETURN
+VR
5
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Setting a disc to protect
DVD-RW
2
3
0
RETURN
STANDBY-ON
DVD+R
OPEN/CLOSE
.@/:
POWER ON
DVD+RW
1
STANDBY-ON
Before recording from an external source, see the instructions for the
connection on page 35.
1.Turn on the TV and press [STANDBY-ON ] and be sure to select
the input of the TV to which the unit is connected.
Refer to the table on page 15.
DVD
2.When you want to record to the disc: Press:
Press [OPEN/CLOSE A] to open the disc tray. Place the disc to
record properly.
3.Press [OPEN/CLOSE A] to close the disc tray.
SETUP
1
CHANNEL
To cancel the disc protect:
• When you insert a disc
protected with this unit,
“Disc Protect ON → OFF” will
appear instead of “OFF → ON”.
TIMER VCR REC DVD REC REC MODE
Using [K / L], select “Yes”.
Press [OK].
A disc will be protected.
TIMER SET SLOW
SEARCH
Disc Protect ON
This operation may take
a while to be completed.
CM SKIP RAPID PLAY
AUDIO DUBBING
OFF
Yes
No
To release the protect for the
disc, select “Disc Protect
ON → OFF” at step 3, then
select “Yes”.
EN
E9A80UD_MWR0V6_01.indd 36
006/01/18 11:45:44
R
Recording
Before you start
Playing the discs in other DVD players
Finalizing a disc
DVD+R
+VR
DVD-RW
+VR
DVD-R
STANDBY-ON
VIDEO/TV
• To cancel finalizing at step 4,
press [STOP C], select “Yes”
with [{ / B], then press [OK].
Finalizing is cancelled and the
unit will be in stop mode.
VCR
.@/:
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
4
RETURN
DISPLAY
OK
DISC MENU
SETUP
1
Press [SETUP].
CHANNEL
2
5%
TIMER VCR REC DVD REC REC MODE
3
Finalize
SEARCH
This operation may take a
while to be completed.
Yes
No
5
Note
Finalizing is completed.
Finalizing
90%
100%
Disc Edit
VCR functions
Changing the
Setup menu
Using [K / L], select “Yes”.
Press [OK].
Finalizing will start.
• Once you have finalized a
disc recorded on DVD+R/
DVD-R, you cannot edit or
record anything else on that
disc.
• There is no need to finalize
DVD+RW discs.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
Editing
4
Finalizing
CM SKIP RAPID PLAY
AUDIO DUBBING
Playing discs
Using [K / L], select “Finalize”.
Press [OK].
Confirmation window will appear.
TIMER SET SLOW
Recording
Using [K / L], select “Disc Edit”.
Press [OK].
Disc menu will appear.
• If
appears when pressing
[STOP C], you cannot cancel
finalizing because the finalizing
has been in certain progress.
• When selecting “No” and press
[OK] or [RETURN] , finalizing
will be continued.
• You cannot cancel finalizing the
DVD+R/DVD-R disc once it has
started.
2
3
4
1
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
Undo Finalize
EN
37
Others Español
To release the finalizing
for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during
finalization, this will result in
malfunction.
E9A80UD_MWR0V6_01.indd 37
Getting started
Do you want to cancel ?
Yes No
Finalizing
Connections
You will need to finalize discs to
play in other DVD players.
Finalizing may take several
minutes up to an hour.
A shorter recording period on
the disc will require a longer time
period for finalization. Do not
unplug the power cord during
finalization.
Details are on pages 25-26.
To cancel finalizing...
(DVD-RW only)
006/01/18 11:45:45
Recording
Playing the discs in other DVD players (cont’d)
Auto finalizing
DVD+R
+VR
+VR
DVD-RW
DVD-R
You can finalize discs
automatically using Auto Finalize
function. You can use this function
to finalize discs after finishing all
Timer Recordings and at the end
of the disc space.
STANDBY-ON
4
VIDEO/TV
Using [K / L], select “Disc Full”
or “End of Timer Rec”. Press
[OK].
Option window will appear.
Auto Finalize - Disc Full
DVD
Press [SETUP].
2
Auto Finalize - End of Timer Rec
3
DVD
ON
OPEN/CLOSE
1
2
3
GHI
JKL
MNO
4
5
6
DEF
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
OFF
Using [K / L], select
“Recording”. Press [OK].
Recording menu will appear.
DVD
ABC
PQRS
ON
1
VCR
.@/:
2
3
4
5
DISPLAY
OK
DISC MENU
SETUP
1
6
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
CM SKIP RAPID PLAY
OFF
SEARCH
Using [K / L], select “Auto
Finalize”. Press [OK].
Auto Finalize menu will appear.
AUDIO DUBBING
DVD
Auto Finalize
Disc Full
OFF
End of Timer Rec
OFF
5
Using [K / L], select “ON”.
Press [OK].
Your setting will be activated.
6
Press [SETUP] to exit.
38
EN
E9A80UD_MWR0V6_01.indd 38
006/01/18 11:45:46
Recording
Before you start
Dubbing Mode
DVD+RW
+VR
DVD-R
DVD+R
+VR
DVD-RW
VCR
Using [K / L], select “Dubbing
Mode”. Press [OK].
Option window will appear.
STANDBY-ON
VIDEO/TV
VCR
.@/:
Dubbing Mode
VCR
DVD
DVD
VCR
VCR DVD
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
Make sure:
• Insert a recordable disc and a
videotape with a record tab.
Note for recording to a videotape:
• The videotape's record tab is
intact.
• The remaining time of the
videotape is long enough.
Note for recording to a disc:
• Make sure that the disc is
recordable. Refer to pages 2526.
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
CM SKIP RAPID PLAY
Recording
SEARCH
AUDIO DUBBING
Playing discs
1
Press [SETUP].
2
Editing
Using [K / L], select
“Recording”. Press [OK].
Recording menu will appear.
DVD
Recording
Auto Chapter
Getting started
OK
DISC MENU
2
3
1
Connections
You can copy a DVD disc to a
videotape or copy a videotape
to a DVD disc. This function
will be possible only if the DVD
disc or the videotape is not copy
protected.
Before starting this function, prepare
for the recording on the DVD+RW/R,
DVD-RW/R disc or the videotape.
Refer to pages 28 and 74.
3
10 minutes
Auto Finalize
VCR
Replace Disc Menu
OFF
DVD
Note
E9A80UD_MWR0V6_01.indd 39
EN
39
Others Español
Instructions continue on the next page.
VCR functions
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction.
Be advised to playback the
videotape until the picture is
stabilized, then set the starting
point which you wish to start
recording, and start VCR to
DVD duplication.
Changing the
Setup menu
Dubbing Mode
006/01/18 11:45:47
Recording
XXXX
(cont’d)
Dubbing
Mode
(cont’d)
VCR to DVD
DVD to VCR
4
Using [K / L], select
“VCR
DVD”. Press [OK].
Dubbing Mode
VCR DVD
STANDBY-ON
4
Using [K / L], select
“DVD
VIDEO/TV
.@/:
VCR”. Press [OK].
Dubbing Mode
VCR
DVD
VCR
DVD
DVD
VCR
DVD
VCR
VCR
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
VCR DVD
DVD
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
OK
DISC MENU
SETUP
6
5
Press [SETUP] to exit.
Press:
DVD
CHANNEL
5
Press [SETUP] to exit.
Press:
Make sure to select a recording
mode using [REC MODE].
Press:
DVD
6
Press [PLAY B]. Then press
6
Press [PLAY B]. Then press
7
Press [DUBBING].
VCR to DVD duplication will start.
8
Press [STOP C] to stop the
recording.
40
8
[PAUSE F] at the point you
wish to start recording.
7
Press [DUBBING].
DVD to VCR duplication will start.
8
Press [STOP C] to stop the
recording.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
VCR
Make sure to select a recording
mode using [REC MODE].
Press:
VCR
[PAUSE F] at the point you
wish to start recording.
• Since it takes about a few
seconds before the actual
dubbing begins, please
allow extra 5 seconds when
selecting the starting point.
4
5
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
7
Note
• When you turn off the unit
after setting the Dubbing
Mode to DVD
VCR, the
setting will be set to
VCR
DVD automatically.
• Dubbing Mode is available
only if the videotape or disc is
not copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
For Audio CD to VCR
duplication:
• This function is available on
Audio CDs, not MP3 files.
For VCR to DVD duplication:
• The playback sound mode
is followed by the setting of
VCR playback sound mode
on page 76. Set the playback
sound mode to which you
wish to record to the DVD.
• This unit will automatically
stop the duplication if
playback with no image is for
more than 3 minutes during
VCR to DVD duplication.
EN
E9A80UD_MWR0V6_01.indd 40
006/01/18 11:45:48
Playing discs
Before you play DVD discs, read the following information.
Region codes
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the
requirements for Region Codes and Color Systems
as described below. Discs that have the following
logos will play on the unit. Other disc types are not
guaranteed to play.
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on the unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your DVD,
you cannot play the DVD in this unit.
Disc
Logo
Connections
Playable discs
Before you start
Information on DVD play
DVD-VIDEO
DVD+R
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play on
the unit with the same region code.
PBC (Playback Control) for Video CD
DVD+R Double Layer
DVD-R
(VIDEO mode, Finalized)
VCD (VIDEO CD)
CD-RW (CD-DA FORMAT,
MP3 files)
is a trademark of DVD Format/Logo Licensing Corporation.
Hint for DVD playback
The contents of DVD disc are generally divided into
titles. Titles may be further subdivided into chapters.
Start Rec.
Stop/Start
Stop Rec.
Title 1
Changing the
Setup menu
Color systems
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Start Rec.
VCR functions
DVDs are recorded in different color systems
throughout the world. The most common color
system is NTSC (which is used primarily in the
United States and Canada).
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system. You cannot play
DVDs recorded in other color system.
Stop Rec.
Track 1 Track 2 Track 3 Track 4 Track 5
41
Others Español
EN
E9A80UD_MWR20V6_02.indd 41
Editing
CD-R (CD-DA FORMAT,
MP3 files)
You can play interactive software using menu
screens. Refer to instructions in the Video CD.
Playing discs
CD-DA (AUDIO CD)
Recording
DVD-RW
(VIDEO mode, Finalized)
This unit conforms to ver.1.1 and ver.2.0 of Video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy
playback picture as well as music CD.
Ver.2.0 (with PBC function): While using a Video CD
with PBC function, “PBC” appears on the screen and
the display.
Note: When playing Video CDs with PBC function,
some operations (e.g., track search and repeat
tracks) cannot be performed. Cancel PBC function
temporarily to perform those operations (refer to
page 73).
Getting started
DVD+RW
2006/01/17 17:58:00
Playing discs
Basic playback
Playback
STANDBY-ON
DVD+RW
DVD+R
+VR
DVD-RW
5
VIDEO/TV
Using [K / L], select a desired
title. Press [OK].
Pop-up window will appear.
+VR
DVD-R
1
Press [STANDBY-ON ].
Turn the TV on and be sure to
select the input to which the unit is
connected.
DVD
Press:
Play
Edit
Overwrite
1
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
3
Insert your disc with its label facing up. Align the disc to the disc
tray guide.
No Disc Name
Disc
DVD+RW
Total Titles
3
Disc Space Used
0:30:48
Disc Protect
OFF
Make Edits Compatible
Needed
<DVD+R, DVD-RW, DVD-R>
No Disc Name
Title list will appear automatically.
SP (2Hr)
Disc
DVD+R
Total Titles
5
Disc Space Used
1:30:48
Disc Protect
OFF
Finalize
Finalized
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
2
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
If you want to return to the
playback while you are stopping
temporarily, press [TITLE] to
resume play.
To exit the title list, press
[STOP C].
42
2
3
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
5
6
6
Using [K / L], select “Play”.
Press [OK].
Playback will start.
7
Press [STOP C] to stop playback.
To eject the disc, press [OPEN/
CLOSE A] to open the disc tray,
then remove the disc before
turning the unit off.
1
2
4
7
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
4
1
DEF
1
RETURN
If you want to see Disc
information, press [{] when
the first page of the title list is
displayed or press [K] when
the firsts title is selected but
“Play”, “Edit” or “Overwrite” is not
highlighted.
<DVD+RW>
disc
tray
guide
Press [OPEN/CLOSE A] to close
the disc tray.
This operation may take a
while to be recognized.
ABC
OPEN/CLOSE
GHI
PQRS
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
3
Press [OPEN/CLOSE A] .
The disc tray will open.
.@/:
DVD
SP (2Hr)
2
2
VCR
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
4
7
CM SKIP RAPID PLAY
AUDIO DUBBING
1.Disc name
(Default “No Disc Name”)
2.Disc Type
(DVD+RW/DVD+R/DVD-RW/
DVD-R)
3.Total number of title
(include “Empty Title”)
4.Total time of recorded disc
space
5.Status of disc protection
(“ON” is protected disc.)
6.Making edits compatible /
Finalize
•When DVD+RW disc is
inserted:
If edit for which “Make Edits
Compatible” is necessary is
done, “Needed” is displayed.
“Not Needed” is not necessary.
•When DVD+R, DVD-RW or
DVD-R disc is inserted:
If “Finalize” is done, “Finalized”
is displayed. Otherwise,
“Unfinalized” is displayed.
Note
• Some discs may start
playback automatically.
• You can also start playback
by pressing [PLAY B] in
stead of [OK] at step 5.
• Press [B] to display the
next page, and press [{] to
display the previous page.
EN
E9A80UD_MWR20V6_02.indd 42
2006/01/17 17:58:02
Playing discs
DVD-V
DVD-RW
CD
Video CD
Video
DVD-R
1
Press [OPEN/CLOSE A] to open
the disc tray.
The disc tray will open.
3
Playing MP3 disc
1
In stop mode, press [TITLE] to call
up the MP3 menu.
File List
DISC NAME
3
• To exit the menu, press
[TITLE] again.
2
When selecting track:
Playback will start.
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
2
DEF
0
DISPLAY
OK
DISC MENU
SETUP
4
5
CHANNEL
Press [STOP C] to stop playback.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Note
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• Some discs may start playback automatically.
• You can select images or information on the menu screen by
activating PBC (Playback control) function (page 73).
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
• Folders are accompanied by
icon.
• MP3 files are accompanied by
3 icon.
Reproduction will start from the
selected track and go to the next
one in turn.
• The system can recognize up to
255 groups (or folders) and up
to 999 tracks.
• The name of group and track
can be displayed in up to 29
characters. Unrecognizable
characters will be replaced with
asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
This unit recommends the files
recorded under the following
circumstances:
• Sampling frequency: 44.1kHz or
48kHz.
• Constant bit rate: 112kbps 320kbps.
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
2
RETURN
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT
deck.
• Files whose extension is other
than “.mp3(MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders
or tracks may be listed in
the MP3 menu due to the
recording status.
EN
E9A80UD_MWR20V6_02.indd 43
1
43
Others Español
When selecting the folder:
The files in folder will appear.
Press [K / L] to select the track or
folder you want, then press [OK].
ABC
1
VCR functions
Press [K / L] to select a desired
folder (group) or track. Press
[OK].
.@/:
1
Changing the
Setup menu
1/2
OPEN/CLOSE
Editing
3
DVD
Playing discs
DVD
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
5
VCR
RETURN
• Press [PLAY B], [OK] or [B] to
move to the lower hierarchies.
• Press [s] or [RETURN] to the
previous hierarchy.
MP3
First:
If you are playing a DVD-Video
disc or Video CD with PBC
function, a menu may appear.
Refer to page 42 for details about
a disc menu.
If you are playing a finalized DVDR/DVD-RW disc, a title list will
appear.
VIDEO/TV
Recording
Insert your disc with its label facing up. Align the disc to the disc
tray guide.
Press [PLAY B] to start playback.
Playback will start.
Getting started
2
STANDBY-ON
Connections
Press [STANDBY-ON ].
Turn the TV on and be sure to
select the input to which the unit is
connected.
DVD
Press:
4
Before you start
Basic playback (cont’d)
Video
2006/01/17 17:58:03
Playing discs
Basic playback (cont’d)
Playing discs using the disc menu
2
DVD-V
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the
playback. For example, the menu
may offer choices for subtitle
languages, special features, or
chapter selection.
Sometimes these are displayed
automatically when you start
playback, otherwise only appear
when you press [DISC MENU].
DVD
First:
1
Press [DISC MENU].
Disc menu will appear.
If the feature is not available,
may appear on the TV screen.
STANDBY-ON
Using [K / L / { / B], select an
item. Press [OK] to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
DISC MENU button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title list’.
Cursor K / L / { / B buttons:
Moves the cursor around screen.
OK button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press [OK]
after.)
3
Press [DISC MENU] to exit the
disc menu.
VIDEO/TV
VCR
.@/:
2
DVD
OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
2
OK
1
2
3
DISC MENU
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
Note
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs using the title menu
DVD-V
Video
DVD-RW
DVD+RW
DVD+R
DL
DVD+R
+VR
DVD-RW
+VR
STANDBY-ON
DVD-R
VIDEO/TV
Video
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start playback
at a specific title.
DVD
First:
1
Press [TITLE].
Title menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Using [K / L / { / B], select a
title to play. Press [OK].
Play will begin at the title you
selected.
TITLE button:
Displays the ‘Title menu’ of a DVD
disc which varies with the disc.
Cursor K / L / { / B buttons:
Moves the cursor around screen.
OK button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press [OK]
after.)
3
.@/:
2
OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
DVD-V
DVD+RW
Video
Video
DVD-R
2
OK
DISC MENU
SETUP
STANDBY-ON
Note
• [TITLE] will not always be
active with all DVDs.
3 discs.
1
2
• Menus vary
among
Refer to the
information
4
5
6
accompanying the disc for
8
9
details. 7
VIDEO/TV
.@/:
VCR
DVD
CHANNEL
ABC
Press [TITLE] to exit the title
menu.
DEF
TIMER
SET SLOWTUVCM SKIP RAPID
PQRS
WXYZPLAY
SEARCH AUDIO DUBBING
CLEAR/C-RESET SPACE
TITLE
0
DL
+VR
DVD+R
DVD-RW
CD
MP3
Video CD
2
+VR
DVD-R
Press [PLAY B] to resume play.
DISPLAY
OK
DISC MENU
SETUP
2
1
CHANNEL
Note
• On DVDs, set “Still Mode” to
“Field” in the Setup menu
if pictures in the pause mode
are blurred. (Refer to page 71.)
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
F
OPEN/CLOSE
TIMER
MODE
GHI VCR RECJKLDVD REC REC
MNO
DVD+R
During playback, press [PAUSE F].
Play will pause and sound will be
muted.
1
2
3
DISPLAY
RETURN
1
44
DVD
0
Pause
DVD-RW
VCR
DVD-R
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 44
2006/01/17 17:58:05
VIDEO/TV
VCR
.@/:
Playing discs
DVD+RW
Video
Video
DVD-RW
DL
+VR
DVD+R
DVD-RW
CD
MP3
Video CD
6
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Press [PLAY B].
Fast forward / Fast reverse
DL
+VR
CHANNEL
Note
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
DVD-RW
CD
MP3
Video CD
CM SKIP RAPID PLAY
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
• Some Video CDs with
the PBC function resume
3
1
2
playback from the beginning
4
5
6
of the track.
SEARCH
AUDIO DUBBING
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
DVD-R
RETURN
DISPLAY
OK
1
DISC MENU
x40
x20
x5
x2
Normal
speed
playback
x20
x40
• Forward/reverse speed will
be indicated with icons as
follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
3
1
2
x5:
x20: 4
5
6
x40:
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
DL
DVD+R
+VR
DVD-RW
+VR
DVD-R
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
Changing the
Setup menu
Video
DVD-RW
DVD+R
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Editing
Skipping TV commercials during play
DVD+RW
Note
STANDBY-ON
For Video CDs, approximate forward/reverse speeds are x2, x8, x16.
For Audio CDs and MP3 files approximate speed is fixed at x8 with
sound.
To return to the normal play, press [PLAY B].
DVD-V
1
CHANNEL
Playing discs
During playback, press [F.FWD D] or [REW E].
Every time you press [F.FWD D] or [REW E], approximate speed will
be changed as follows.
Fast forward or fast reverse playback across titles (for DVD discs) or
tracks (for MP3) is not possible.
SETUP
Video
DVD-R
OK
You can skip TV commercials by pressing [CM SKIP], so that you can
enjoy the recorded programs without interrupting.
DISC MENU
1
Every time you press [CM SKIP], the searching point will be extended by
30 seconds ahead.
You can press up to 6 times (180 seconds).
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
1
B
Playback will restart automatically.
EN
E9A80UD_MWR20V6_02.indd 45
45
Others Español
(forwarding 30 seconds)
e.g. Press [CM SKIP] once.
VCR functions
During playback, press [CM SKIP].
Normal play will start at 30 seconds ahead from the point you press
[CM SKIP].
CM Skip 30 sec.
Recording
DVD+R
1
2
2
+VR
DVD+R
DVD-R
SETUP
Getting started
2
DISPLAY
DISC MENU
To cancel the resume play and
start playing the disc from the
beginning, press [STOP C] the
second time while the play is
stopped.
Resume ON
DVD-RW
5
TUV
Connections
During playback, press [STOP C].
The resume message will appear.
Video
4
PQRS
OK
DVD-R
In a few seconds, play will resume
from the point at which it stopped
last. You can resume play at the
same point even if you turn off the
unit.
1
DVD+RW
3
MNO
+VR
DVD+R
DVD-R
Video
DEF
2
JKL
RETURN
You can resume play from where
you stopped playing the disc last.
DVD-V
ABC
1
GHI
0
Resume play
DVD-V
OPEN/CLOSE
Before you start
Special playback
DVD
2006/01/17 17:58:07
STANDBY-ON
Playing discs
VIDEO/TV
.@/:
Special playback (cont’d)
DVD-V
DVD+RW
Video
Video
DVD+R
+VR
DL
DVD-RW
DVD+R
B
B
During playback, press
[RAPID PLAY].
3
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
DVD-R
RETURN
DISPLAY
B
DISC MENU
: Press [RAPID PLAY] once
during playback.
Plays back approximately
at 0.8 times of normal
playback.
: Press [RAPID PLAY]
three times to play back in
normal speed.
No effects.
2
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
Video
DVD-R
Note
STANDBY-ON
VIDEO/TV
+VR
DL
DVD-RW
DVD+R
VCR
.@/:
+VR
DVD-R
DVD
OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
Video CD
1
During playback, press [PAUSE F].
Play will pause and sound will be
muted.
F
2
Press [SKIP G] repeatedly.
The play will advance one frame
(or step) at a time when you press
[SKIP G] with the sound muted.
To play step by step backward:
Press [SKIP H] repeatedly.
Every time you press the button,
the play will go backward by one
frame.
• Press and hold
[SKIP H / G] to reverse/
advance continuously.
3
OK
DISC MENU
VIDEO/TV
1
1
VCR
DVD
ABC
2
DEF
DVD+RW
Video
Video
DVD-RW
DVD-R
DVD+R
CHANNEL
JKL
MNO
4
5
6
8
7
9
TIMER SET SLOW
CM SKIP RAPID
CLEAR/C-RESET
SPACE
TITLEPLAY
SEARCH
RETURN
0
AUDIO DUBBING
DISPLAY
• Only step by step forward
playback is available for
OK
playing back Video
CDs.
SETUP
1
+VR
DVD-RW
DVD+R
+VR
DVD-R
Note
Video CD
TIMER VCR REC DVD REC REC MODE
• Forward/reverse speed will
be indicated with icons as
follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/3:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
• Only slow forward playback
is available for playing back
Video CDs.
TIMER SET SLOW
1
During playback, press [PAUSE F]. Then press [F.FWD D] or [REW E].
Every time you press [F.FWD D] or [REW E], approximate speed will
be changed as follows. (The sound will remain muted.)
x1/8
x1/16
Pause
x1/16
To return to the normal play, press [PLAY B].
46
CHANNEL
SEARCH
x1/4
3
3
GHI
DISC MENU
DL
2
OPEN/CLOSE
TIMER
MODE
PQRS VCR RECTUVDVD REC REC
WXYZ
Note
Press [PLAY B] to continue the
normal playback.
.@/:
SETUP
STANDBY-ON
Slow forward / Slow reverse play
DVD-V
1
CM SKIP RAPID PLAY
AUDIO DUBBING
• Audio (language) setting
cannot be changed while
using this mode.
• This feature may not work at
some point in a disc.
• Audio is PCM during Rapid
play mode.
Step by step playback
DVD+R
SETUP
CHANNEL
: Press [RAPID PLAY]
twice during playback.
Plays back approximately
at 1.3 times of normal
playback.
Press [PLAY B] to continue the
normal playback.
Video
DEF
2
JKL
+VR
2
DVD-RW
ABC
OK
1
DVD+RW
OPEN/CLOSE
1
DVD-R
Rapid play function is available
only during playback.
Available only on discs recorded
in the Dolby Digital format, Rapid
play plays back in a slightly
faster/slower speed while keeping
the sound quality just as normal
playback.
DVD-V
DVD
GHI
PQRS
Rapid play
DVD-RW
VCR
x1/8
x1/3
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 46
2006/01/17 17:58:08
Playing discs
Before you start
Special playback (cont’d)
Zoom
DVD-V
DVD+RW
Video
Video
DVD-RW
DVD+R
DVD-R
DVD-Video
Using [{ / B], select
[OK].
Zoom menu will appear.
1
0:00:00
VCR
.@/:
Using [K / L], select a desired
zoom factor to zoom. Press
[OK].
The zoom area will be displayed.
ABC
2
3
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
4
DISPLAY
OK
DISC MENU
SETUP
TIMER SET SLOW
SEARCH
Using [K / L / { / B], select a
desired zoom position. Press
[OK].
The zoom play will start.
AUDIO DUBBING
STANDBY-ON
VCR
Video
CD
DVD-R
+VR
DL
DVD-RW
DVD+R
0:00:00
3
4
DVD-Video
Using [{ / B], select
. Press
[OK].
Marker setup menu will appear.
<DVD-Video>
1
1
2
3
4
5
6
-------------
DVD-Video
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
6
Audio CD
-------------
2
3
4
To return to the marker later:
Using [K / L], select the desired
marker number. Press [OK].
OK
DISC MENU
SETUP
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Note
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• To clear a marker, select the
marker number to be cleared,
then press [CLEAR/C-RESET].
• All markers will be erased
when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Recording to a recordable
disc
• You can mark up to 6 points.
• Marker Setup is not available
when you play the Video CD
with PBC function.
EN
E9A80UD_MWR20V6_02.indd 47
1
CHANNEL
3
Using [K / L], select a desired
marker number. When it reaches
the desired point, press [OK].
The title (track) number and the
time will be displayed.
DISPLAY
47
Others Español
1
0:00:00
5
4
5
VCR functions
2
4
Changing the
Setup menu
0:00:00
3
MNO
Editing
1
2
1
2
JKL
RETURN
1
1
DEF
1
0
<Audio CD>
1
ABC
OPEN/CLOSE
GHI
PQRS
Video CD
This feature allows you to assign a
specific point on a disc to be called
back later.
During playback, press
[DISPLAY].
Display menu will appear.
+VR
DVD-R
DVD
Playing discs
VIDEO/TV
.@/:
DVD+R
Recording
4
CM SKIP RAPID PLAY
• When selecting a smaller
factor than the current one,
the zoom area will not be
displayed.
• To exit the zoom menu, press
[DISPLAY] again at step 1.
• To cancel the zoom function,
select “x1.0” using [K / L],
then press [OK].
Marker Setup
DVD-RW
1
CHANNEL
Note
There are four options
(x1.0, x1.2, x1.5 and x2.0), these
are displayed excluding the current
zoom rate.
Video
DEF
1
TIMER VCR REC DVD REC REC MODE
DVD-Video
DVD+RW
OPEN/CLOSE
GHI
. Press
1.2
1.5
2.0
DVD-V
DVD
Getting started
2
1
VIDEO/TV
Connections
0:00:00
STANDBY-ON
+VR
DVD-R
3
During playback, press
[DISPLAY].
Display menu will appear.
1
DVD-RW
Video CD
1
1
+VR
DL
DVD+R
2006/01/17 17:58:10
STANDBY-ON
VIDEO/TV
Playing discs
Search
Title/Chapter search
DVD+RW
DVD-V
Video
DVD+R
DL
DVD+R
+VR
DVD-RW
VCR
OPEN/CLOSE
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
+VR
RETURN
DVD-R
DISPLAY
Video
DVD-RW
DVD
.@/:
DVD-R
OK
DISC MENU
Using [SKIP H / G]
SETUP
1
1
CHANNEL
During playback, press [SKIP G] to skip the current title or chapter
and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will be skipped.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
To go back to the beginning of the current title or chapter, press
[SKIP H].
Press it repeatedly to go to the previous title or chapter. The title or
chapter will move backward one title at a time.
Using [DISPLAY]
1
STANDBY-ON
During playback, press [DISPLAY].
Display menu will appear.
1
1
0:00:00
VIDEO/TV
VCR
.@/:
DVD-Video
2
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
2
Using [{ / B], select
. Press [OK].
The number next to
will be highlighted.
Title:
Using [K / L] or the Number buttons, enter a desired title number to
search. Press [OK].
Title search will start.
Chapter:
Press [B] to move to the number next to
for chapter.
Using [K / L] or the Number buttons, enter a desired chapter number to search. Press [OK].
Chapter search will start.
Note
01 /01
001/028
OK
DISC MENU
1
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
00:00:00/02:18:33
• In search mode display, total
numbers of each search contents
(title/chapter/time) are shown as a
denominator.
Total number
of titles
Total number
of chapters
48
DISPLAY
Total time
of the disc
EN
E9A80UD_MWR20V6_02.indd 48
2006/01/17 17:58:11
STANDBY-ON
VIDEO/TV
Playing discs
Track search
DVD
OPEN/CLOSE
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Before you start
Search (cont’d)
VCR
.@/:
0
CD
MP3
RETURN
Video CD
DISPLAY
Using [SKIP H / G]
OK
DISC MENU
1
During playback, press [SKIP G] to skip the current track and
move to the next.
The track will move forward one at a time.
To go back to the beginning of the current track, press [SKIP H].
Press it repeatedly to go to the previous track. The track will move
backward one at a time.
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
CM SKIP RAPID PLAY
AUDIO DUBBING
STANDBY-ON
Using [DISPLAY]
VIDEO/TV
1
During playback, press [DISPLAY].
Display menu will appear.
<Audio CD>
0:00:00
3
<MP3 files>
Audio CD
1
0:00:00
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
DEF
7
8
9
CLEAR/C-RESET
SPACE
TITLE
MP3
0
RETURN
2
3
2
DISC MENU
SETUP
Note
3
1
OK
CHANNEL
TIMER VCR REC DVD REC REC MODE
Using [K / L] or the Number buttons, enter a desired track number
to search. Press [OK].
Track search will start.
Time search
DVD+RW
DVD-V
Video
DVD+R
CD
Video CD
DVD-R
During playback, press
[DISPLAY].
Display menu will appear.
<DVD-Video>
0:00:00
DVD-Video
<Audio CD>
0:00:00
STANDBY-ON
Audio CD
2
Using [{ / B], select
.
Press [OK].
The number next to
will be
highlighted.
To move to the number next to
,
press [B].
When time search is not available,
and time counter are not
displayed.
3
Using [K / L] or the Number
buttons, enter a desired time to
search. Press [OK].
Time search will start.
VCR
.@/:
3
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
DISPLAY
DISC MENU
Note
SETUP
CHANNEL
• Time search function is
available only in the same
track or title.
• Time search is not available
when you play the Video CD
with PBC function.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 49
1
OK
49
Others Español
1
+VR
DVD-R
VCR functions
1
CM SKIP RAPID PLAY
AUDIO DUBBING
Changing the
Setup menu
1
1
+VR
DVD-RW
SEARCH
VIDEO/TV
Video
DVD-RW
DL
DVD+R
TIMER SET SLOW
Editing
• During CD playback you can
enter a track number directly
using the Number buttons
for track search without
displaying the menu.
• Track search is not available
when you play the Video CD
with PBC function.
Playing discs
Using [{ / B], select
. Press [OK].
The number next to
will be highlighted.
DISPLAY
Recording
1
Getting started
SEARCH
Connections
1
SETUP
2006/01/17 17:58:12
Playing discs
Repeat/Random/Program playback
Repeat playback
DVD+RW
DVD-V
Video
DVD-RW
DVD-RW
CD
MP3
Video CD
0:00:00
Using [K / L], select a desired
option to repeat. Press [OK].
The selected repeat play will start.
DVD-Video
Using [{ / B], select
. Press
[OK].
Repeat menu will appear.
<DVD-Video>
1
0:00:00
DVD-Video
OFF
Title
Chapter
A-B
<Audio CD / Video CD>
1
0:00:00
Audio CD
OFF
Track
All
A-B
<MP3 files>
1
0:00:00
MP3
OFF
Track
All
Group
Title:
The current title will be played
repeatedly. (DVD only)
Chapter:
The current chapter will be played
repeatedly. (DVD only)
Track:
The current track will be played
repeatedly. (Audio CD, MP3,
Video CD)
Group:
The current group will be played
repeatedly. (MP3 only)
ABC
Video CD
With this function, you can play a
disc randomly instead of playing in
the original order.
DVD
First:
1
3
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
2
3
DISPLAY
1
OK
DISC MENU
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• The A-B Repeat playback can
only be set with in the current
title (for DVDs), or current
track (for Audio CDs).
• To cancel the repeat
playback, select “OFF” at the
step 2. The repeat setting will
also be cancelled when you
stop playback.
• You cannot select “Group”
during the random playback
of MP3 files.
• Repeat playback
is3 not
1
2
available4when
you
play the
5
6
Video CD with PBC function.
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
3
Using [K / L], select “Random
Play”. Press [OK].
Random playback will start.
2
3
DISPLAY
OK
DISC MENU
SETUP
1
Note
• To cancel random playback,
press [STOP C] twice during
random playback. “Play mode
OFF” appears on the TV
screen.
• For Video CDs with PBC
function, the PBC setting
will be switched to off
automatically when you start
random playback.
CHANNEL
TIMER VCR REC DVD REC REC MODE
Press [SETUP].
2
TIMER SET SLOW
SEARCH
Using [K / L], select “CD
Playback Mode”. Press [OK].
CD Playback Mode menu will
appear.
50
DEF
2
JKL
0
Random playback
MP3
OPEN/CLOSE
1
PQRS
CD
DVD
GHI
PQRS
All:
The current disc will be played
repeatedly. (Audio CD, MP3,
Video CD)
A-B:
The A-B point will be played
repeatedly.
When pressing [OK] while A-B
is highlighted, A-B repeat is set.
Press [OK] again to decide the
starting point (A).
Press [OK] after setting point A to
select the ending point (B).
VCR
.@/:
3
2
1
STANDBY-ON
+VR
DVD-R
VIDEO/TV
Video
DVD-R
During playback, press
[DISPLAY].
Display menu will appear.
1
+VR
DVD+R
1
1
DL
DVD+R
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 50
2006/01/17 17:58:14
STANDBY-ON
Playing discs
VIDEO/TV
VCR
1
2
Video CD
3
GHI
JKL
MNO
1
3
09
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
0:06:11
5
Press [PLAY B].
Program playback will start.
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
TITLE
0:00:00
2
3
4
DISPLAY
OK
DISC MENU
1
5
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
Note
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• To erase tracks you selected,
press [CLEAR/C-RESET].
• You can make program
settings up to 50.
• To cancel program playback,
press [STOP C] twice during
program playback. “Play mode
OFF” appears on the TV
screen.
• You may also select a desired
track using the Number
buttons at step 4.
• For Video CDs with PBC
function, the PBC setting
will be switched to off
automatically when you start
program playback.
STANDBY-ON
VIDEO/TV
Selecting the format of audio and video
0:00:00
DVD-Video
DEF
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
2
Using [{ / B], select
.
Press [OK].
Subtitle menu will appear.
2
3
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
1
1
0:00:00
DVD-Video
TIMER VCR REC DVD REC REC MODE
3
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Some discs will only allow you
to change the subtitle from
the disc menu. Press
[TITLE] or [DISC MENU] to
display the disc menu.
• If a 4-digit language code
appears in the subtitle
menu at step 2, refer to the
Language code on page 81.
51
Others Español
Using [K / L], select a desired
subtitle language. Press [OK].
Subtitle will be displayed in the
selected language.
When selecting “OFF”, subtitle will
disappear.
TIMER SET SLOW
EN
E9A80UD_MWR20V6_02.indd 51
1
VCR functions
1
3
GHI
RETURN
1
1
2
0
OFF
1.English
2.French
During playback, press
[DISPLAY].
Display menu will appear.
ABC
1
Changing the
Setup menu
Many DVD-Video discs have
subtitles in one or more languages
– the case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
OPEN/CLOSE
.@/:
PQRS
Switching subtitles
DVD-V
DVD
Editing
You can select the format of audio and video as you prefer depending on
the contents of the disc you are playing.
VCR
Playing discs
--
SPACE
Recording
Using [K / L], select “Program
Play”. Press [OK].
Program play list will appear.
9
CLEAR/C-RESET
Getting started
Using [K / L], select “CD
Playback Mode”. Press [OK].
CD Playback Mode menu will
appear.
6
WXYZ
8
0
Program Play
2
5
TUV
7
RETURN
Using [K / L], select a desired
track. Press [OK] or [B].
A cursor will move to next.
Press [SETUP].
4
PQRS
Connections
You can program the disc to play
in your desired order.
DVD
First:
4
DEF
Before you start
CD
OPEN/CLOSE
ABC
Repeat/Random/Program playback (cont’d)
Program playback
DVD
.@/:
2006/01/17 17:58:15
Playing discs
Selecting the format of audio and video (cont’d)
Switching audio soundtrack
DVD-V
CD
Video CD
STANDBY-ON
<Audio CD>
1
When playing a DVD-Video
disc recorded with two or more
soundtracks (these are often in
different languages), you can
switch them during playback.
When playing Audio CDs or Video
CDs you can switch between
stereo, just the left channel or just
the right channel.
1
Using [{ / B], select
Press [OK].
Audio menu will appear.
<DVD-Video>
1
1
0:00:00
0:00:00
Audio CD
1. L/R
2. L
3. R
3
Using [K / L], select a desired
audio soundtrack or audio channel. Press [OK].
<DVD-Video>
Audio soundtrack will switch.
<Audio CD/Video CD>
Audio channel will switch.
During playback, press
[DISPLAY].
Display menu will appear.
2
VIDEO/TV
audio channel. Press [OK].
Audio channel will switch.
DVD
OPEN/CLOSE
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
4
DISPLAY
OK
DISC MENU
1
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
4
Using [K / L], select a desired
.
VCR
.@/:
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Some discs will only allow
you to change the soundtrack
from the disc menu. Press
[TITLE] or [DISC MENU] to
display the disc menu.
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
DVD-Video
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch French
Switching virtual surround system
DVD-V
DVD+RW
Video
Video
DVD-RW
+VR
DL
DVD+R
DVD+R
DVD-RW
CD
MP3
Video CD
DVD-R
You can enjoy stereophonic virtual
space through your exciting 2
channel stereo system.
1
0:00:00
VIDEO/TV
1
0:00:00
DVD+RW
1
1
0:00:00
DVD-Video
OFF
Type 1
Type 2
52
ABC
<Audio CD/MP3 files>
1
1
0:00:00
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
Audio CD
OFF
Type 1
Type 2
Using [{ / B], select
.
Press [OK].
Virtual Surround menu will appear.
<DVD-Video>
DVD
RETURN
DVD-Video
2
VCR
.@/:
OFF
Type 1
Type 2
Display menu will appear.
1
STANDBY-ON
<DVD+RW>
1
During playback, press [DISPLAY].
1
+VR
DVD-R
2
3
OK
DISC MENU
1
SETUP
CHANNEL
3
Using [K / L], to select “OFF”,
“Type1” or “Type2”, then press
[OK].
• OFF: no effect
• Type1: natural effect
• Type2: emphasized effect
DISPLAY
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Select Virtual Surround to
“OFF” in a case sound is
dissorted.
• The setting will be kept “OFF”
when the unit is turned off.
EN
E9A80UD_MWR20V6_02.indd 52
2006/01/17 17:58:17
Playing discs
Before you start
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
VIDEO/TV
2
Using [{ / B], select
.
Press [OK].
Angle will switch each time you
press [OK].
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
2
DISPLAY
OK
DISC MENU
1
SETUP
DVD-Video
Getting started
0:00:00
OPEN/CLOSE
0
During playback, press
[DISPLAY].
Display menu will appear.
1
DVD
ABC
RETURN
1
1
VCR
.@/:
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Playing discs
Reducing block noise
DVD-V
Video
DVD-RW
DVD+RW
Video
DVD-R
DVD+R
DL
DVD+R
+VR
DVD-RW
+VR
DVD-R
Video CD
1
STANDBY-ON
3
VIDEO/TV
Using [K / L], select a desired
option. Press [OK].
Your setting will be activated.
VCR
1
0:00:00
DVD-Video
1
2
DEF
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
DISPLAY
1
OK
DISC MENU
SETUP
CHANNEL
2
1
1
0:00:00
TIMER SET SLOW
SEARCH
VCR functions
TIMER VCR REC DVD REC REC MODE
Using [{ / B], select
.
Press [OK].
Noise Reduction menu will appear.
CM SKIP RAPID PLAY
AUDIO DUBBING
DVD-Video
E9A80UD_MWR20V6_02.indd 53
53
Others Español
OFF
Type 1
Type 2
EN
Changing the
Setup menu
This function reduces noise in the
playback picture. When playing
back discs recorded in long time
mode such as EP or SLP mode,
select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select “OFF”.
OPEN/CLOSE
ABC
PQRS
1
DVD
.@/:
Editing
During playback, press
[DISPLAY].
Display menu will appear.
Recording
Note
Angle icon does not appear on
the screen in a case you have
selected Angle as “OFF” in the
Display setting.
Refer to pages 68-69.
Angle icon appears when a
switching camera angle is available.
Connections
Some DVD-Video discs feature
scenes shot from two or more
angles, check the case for details:
it should be marked with Angle
icon if it contains multi-angle
scenes.
STANDBY-ON
2006/01/17 17:58:18
Editing
Information on disc editing
Guide to a title list
Editing discs
Title list allows you to check the titles recorded on
the disc easily. You can choose a title to play from
this list and easily edit the titles as you prefer.
You can edit discs for the following items. Be sure
that once you edit titles, they will not remain as
original.
• Deleting titles (Refer to page 55)
• Putting names on titles (Refer to page 56)
• Setting / Clearing chapter marks (Refer to pages
57-58)
• Hiding chapters (Refer to page 59)
• Setting pictures for thumbnails (Refer to page 60)
• Dividing a title (DVD+RW/DVD-RW only) (Refer to
page 61)
Press [TITLE].
1
SP (2Hr)
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
Play
Edit
Overwrite
2
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
Note
3
NOV/24/06 10:05AM CH10 EP
NOV/24/06 0:20:11
• When selecting “Edit” on Pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc. Press
[STOP C] to exit the title list.
Editing discs (Setup menu)
Edit
2
Title Delete
Edit Title Name
Chapter Mark
Current Chapter
Index Picture
Title Dividing
NOV/22/05 11:00AM CH12 EP
0:00:59
• Putting name on disc (Refer to page 62)
• Setting or releasing disc protect (Refer to pages
63-64)
• Erasing disc (Refer to page 65)
• Making edits compatible (Refer to page 65)
Note
1.Titles recorded on the disc can be selected to edit
by pressing [OK] with the cursor on the title.
Using [K / L], select “Edit”. Press [OK].
2.The arrow icon, which means the title list includes
a next or a previous page. Press [K / L] by
following direction of the icon. You can also use
[{ / B] to go to the next / previous page.
3.The portion bar, which indicates the position of the
disc.
4.The menus in here for editing as you prefer. The
available menus depend on the disc type and
the format type. An item which is not available is
grayed.
5.The details of the title, which can be changed to
the title name you will edit.
6.Time status bar of the title
Time status will be held even after exiting the edit
mode, and you can resume playback from that
point.
7.The selected title thumbnail from the title list
8.Playback status of the current title
54
• The portion bar in the right side of the title list
may not indicate the precise position in the disc.
• The portion bar may not indicate the position for
the titles of which recording time is short.
• Once a disc is finalized, editing the disc or
recording to the disc will not be available.
EN
E9A80UD_MWR20V6_02.indd 54
2006/01/17 17:58:18
Editing
Before you start
Editing discs
Deleting titles
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
SP (2Hr)
1
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
Yes
PQRS
TUV
WXYZ
No
7
8
9
CLEAR/C-RESET
SPACE
TITLE
1
0
RETURN
DISPLAY
2
3
4
5
OK
NOV/22/05 11:00AM CH12 EP
DISC MENU
0:00:59
5
SETUP
CHANNEL
Using [K / L], select “Yes”.
Press [OK].
After that, “Are you sure?” will
appear, select “Yes” and then
press [OK].
Title will be deleted.
Data will be written onto the disc
momentarily.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Playing discs
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
.@/:
Title Delete
1
VCR
Recording
Press [TITLE].
Title list will appear.
<DVD+RW/DVD-RW>
VIDEO/TV
2
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Writing to Disc
2
90%
Title list will appear.
<DVD+RW/DVD-RW>
1
Editing
Using [K / L], select a desired
title. Press [OK].
Pop-up window will appear.
SP (2Hr)
EMPTY TITLE
0:20:44 SP(2Hr)
Play
Edit
Overwrite
SP (2Hr)
1
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
2
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Changing the
Setup menu
2
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
<DVD+R/DVD-R>
1
Using [K / L], select “Edit”.
Press [OK].
Edit menu will appear.
SP (2Hr)
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
VCR functions
3
2
EMPTY TITLE
1:37:52 SP(2Hr)
Edit
1
Title Delete
Edit Title Name
Chapter Mark
Index Picture
Title Dividing
NOV/22/05 11:00AM CH12 EP
This operation may take a
while to be completed.
Note
• Deleted part of the titles in the
portion bar changes in color.
0:00:59
EN
E9A80UD_MWR20V6_02.indd 55
55
Others Español
Current Chapter
Getting started
1
STANDBY-ON
Using [K / L], select “Title
Delete”. Press [OK].
Confirmation window will appear.
Connections
You can delete titles which you do
not need anymore.
Be advised that the titles once
deleted cannot be brought back to
the disc.
When the last title, which is
recorded in the disc, in the title
list is deleted, the disc space to
recorded will be increased. For
DVD+R and DVD-R disc, the
disc space to record will not be
changed.
DVD
First:
4
2006/01/17 17:58:20
Editing
Editing discs (cont’d)
Putting names on titles
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a title list.
DVD
First:
4
STANDBY-ON
Using [K / L], select “Yes”.
Press [OK].
The name you entered will be
activated for the title.
VIDEO/TV
.@/:
3
Edit Title Name
6
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Yes
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
No
5
1
RETURN
DISPLAY
2
3
4
OK
Follow steps 1 to 3 on page 55 to
display the Edit menu.
2
VCR
DISC MENU
SETUP
MY FAVORITE
0:00:59
Using [K / L], select “Edit Title
Name”. Press [OK].
A window for entering a title name
will appear.
Edit Title Name
6
A B C
a b c
1 2 3
@ !
5
CHANNEL
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc
momentarily.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
This operation may take a
while to be completed.
?
[ Guide to edit title name ]
NOV/22/05 11:00AM CH12 EP
0:00:59
3
[Step1]: Select a desired character set using [K/L],
then press [OK].
ABC
abc
123
@!?
[Step2]: Follow the list below, press the Number buttons repeatedly until the
To enter a title name, follow
the steps of “Guide to edit title
name” on this page.
character set
e.g. character set : A B C
desired letter appears.
Select
ABC
abc
123
@!?
<space>
<space>
0
<space>
Press
0
Edit Title Name
6
A B C
(*1)
1
(*1)
1
a b c
1 2 3
@ !
0:00:59
area for entering title names
When you finish entering a title
name, press [OK].
Confirmation window will appear.
2
ABC
abc
2
(*2)
3
DEF
def
3
(*2)
4
GHI
ghi
4
(*2)
5
JKL
jkl
5
(*2)
6
MNO
mno
6
(*2)
7
PQRS
pqrs
7
(*2)
8
TUV
tuv
8
(*2)
9
WXYZ
wxyz
9
(*2)
*1 Press
1
A B C A...
! ”# $ % & ’( )
Note:
*+,-./:;<=>
Undefined letters in a
?@[]^_{|}
?
M
press 2
title name are shown
by “*”. If you delete
them, adjoining letters
letters may change to
“*” or other.
, character set will be changed to the “ @!? ” mode automatically.
*2 Press 2 to 9 , character set will be changed to the previous input mode
automatically.
• To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete
all letters.
• Press [s / B] to move the cursor to the left or right.
• You can enter up to 30 letters.
56
EN
E9A80UD_MWR20V6_02.indd 56
2006/01/17 17:58:21
Editing
Before you start
Editing discs (cont’d)
Setting chapter marks
DVD+RW
+VR
DVD-RW
DVD+R
+VR
DVD-R
Using [K / L], select “Add”.
Press [OK].
Confirmation window will appear.
STANDBY-ON
VIDEO/TV
Chapter Mark - Add
3
Yes
No
Chapter
OPEN/CLOSE
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
2/ 2
DVD
ABC
DEF
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
6
F
Follow steps 1 to 3 on page 55 to
display the Edit menu.
2
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear.
Delete All
2/ 2
NOV/22/05 11:00AM CH12 EP
OK
DISC MENU
SETUP
5
3
Using [K / L], select “Yes”.
Press [OK].
A new chapter mark will be added.
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
This operation may take a
while to be completed.
Playing discs
0:00:59
DISPLAY
Recording
Add
Delete
Chapter
0:00:59
6
Chapter Mark
3
NOV/22/05 11:00AM CH12 EP
RETURN
2
4
5
3
Editing
Press [PLAY B] and then
[PAUSE F] to decide the point
at which you will create a new
chapter mark.
• It is convenient to use
[SKIP H / G], [REW E]
and [F.FWD D] for finding the
point to be added a new chapter
mark.
Others Español
57
VCR functions
EN
Changing the
Setup menu
Note
• When the number of chapter
marks in a title is 99 and the
number of chapter marks in
a disc is 254, chapter marks
cannot be added.
• Besides the abovementioned, it is not likely to
be able to add according to
recorded time and number of
chapters.
• Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
E9A80UD_MWR20V6_02.indd 57
Getting started
1
VCR
.@/:
Connections
You can put chapter marks in each
title. Once a chapter is marked,
you can use it for the chapter
search feature.
DVD
First:
4
2006/01/17 17:58:21
Editing
Editing discs (cont’d)
Clearing chapter marks
DVD+RW
+VR
DVD-RW
DVD+R
STANDBY-ON
Confirmation window will appear.
Chapter Mark - Delete
+VR
3
Yes
No
DVD
Chapter
1
2
2/ 2
DVD
OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
F
Follow steps 1 to 3 on page 55 to
display the Edit menu.
VCR
.@/:
DVD-R
First:
VIDEO/TV
NOV/22/05 11:00AM CH12 EP
0:00:59
6
RETURN
DISPLAY
OK
DISC MENU
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear as
illustrated step 2 on page 57.
3
Using [SKIP H / G], select a
chapter mark to be deleted.
4
Using [K / L], select “Delete”.
Press [OK].
5
Using [K / L], select “Yes”.
Press [OK].
The selected chapter mark will be
deleted.
SETUP
3
CHANNEL
TIMER VCR REC DVD REC REC MODE
6
TIMER SET SLOW
SEARCH
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
2
4
5
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
To delete all chapter marks:
First:
STANDBY-ON
4
DVD
1
Follow steps 1 to 3 on page 55 to
display the Edit menu.
2
VIDEO/TV
Using [K / L], select “Yes”.
Press [OK].
Final confirmation window will
appear.
Chapter Mark - Delete All
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear as
illustrated step 2 on page 57.
Using [K / L], select “Delete
All”. Press [OK].
Confirmation window will appear.
No
Yes
No
Chapter
NOV/22/05 11:00AM CH12 EP
0:00:59
OPEN/CLOSE
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
DISPLAY
OK
2/ 2
DISC MENU
SETUP
NOV/22/05 11:00AM CH12 EP
0:00:59
CHANNEL
5
2
3
4
5
TIMER VCR REC DVD REC REC MODE
6
2/ 2
F
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
58
6
Using [K / L], select “Yes”.
Press [OK].
All chapter marks will be deleted.
Chapter Mark - Delete All
3
Are you sure?
Yes
3
DVD
ABC
0
3
Chapter
VCR
.@/:
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
EN
E9A80UD_MWR20V6_02.indd 58
2006/01/17 17:58:22
Editing
Before you start
Editing discs (cont’d)
Hiding chapters
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
Follow steps 1 to 3 on page 55 to
display the Edit menu.
2
Using [K / L]], select “Current
Chapter”. Press [OK].
Option window will appear.
VIDEO/TV
This operation may take a
while to be completed.
If you want to return “Visible”,
select the chapter to be shown.
Then using [K / L],, select
“Visible” at the step 4 on this
page.
VCR
DVD
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
2
4
5
0
5
RETURN
DISPLAY
OK
DISC MENU
SETUP
3
Data will be written onto the disc
momentarily.
After that Title list is displayed.
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
6
OPEN/CLOSE
.@/:
Visible
SEARCH
Recording
Current Chapter
STANDBY-ON
CM SKIP RAPID PLAY
AUDIO DUBBING
Hidden
Chapter
2/ 2
Getting started
1
After this operation is completed, press [RETURN] twice
to exit.
Data will be written onto the disc
momentarily.
Connections
You can hide chapters from the
title list.
Hidden chapters are skipped
during playback.
DVD
First:
5
Visible
Playing discs
NOV/22/05 11:00AM CH12 EP
0:00:59
3
Using [SKIP H / G],
[PLAY B] and [PAUSE F],
decide the chapter to be hidden.
4
Editing
Note
1
Hidden
SP (2Hr)
NOV/21/06 12:20AM CH12 SP
NOV/21/06 0:20:44
2
3
EMPTY TITLE
1:37:52 SP(2Hr)
EN
E9A80UD_MWR20V6_02.indd 59
59
Others Español
NOV/22/06 11:35AM CH13 EP
NOV/22/06 0:10:33
VCR functions
• When you make all chapters
in the title to “Hidden”,
“Hidden” is displayed in a
thumbnail of the title list.
Changing the
Setup menu
Using [K / L],, select “Hidden”.
Press [OK].
“Hidden” is displayed in the middle
of the preview screen on Current
chapter window.
“Hidden” is also displayed on the
lower right corner of the preview
screen on Edit menu option
window other than Current chapter
window.
2006/01/17 17:58:23
Editing
Editing discs (cont’d)
Setting pictures for thumbnails
DVD+RW
+VR
DVD-RW
DVD+R
+VR
DVD-R
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the title
you are playing. The beginning
picture has been selected as the
default.
DVD
First:
1
Follow steps 1 to 3 on page 55 to
display the Edit menu.
4
STANDBY-ON
Using [K / L], select “Yes”.
Press [OK].
A picture for thumbnail will be set.
VIDEO/TV
5
VCR
This operation may take a
while to be completed.
OPEN/CLOSE
ABC
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
DVD
.@/:
DEF
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
5
RETURN
DISPLAY
OK
DISC MENU
2
SETUP
CHANNEL
Using [K / L], select “Index
Picture”. Press [OK].
2
3
4
3
TIMER VCR REC DVD REC REC MODE
3
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Press [PLAY B] and then
[PAUSE F] to decide the picture
to be set as the thumbnail.
• It is convenient to use
[SKIP H / G], [REW E]
and [F.FWD D] for finding the
thumbnail picture.
Press [OK].
Confirmation window will appear.
Index Picture
6
Yes
No
F
NOV/22/05 11:00AM CH12 EP
0:00:59
Note
• If the selected picture for a
thumbnail is overwritten, the
index picture is reset to the
first scene of the title.
60
EN
E9A80UD_MWR20V6_02.indd 60
2006/01/17 17:58:23
Editing
Before you start
Editing discs (cont’d)
Dividing a title
DVD+RW
+VR
DVD-RW
1
Follow steps 1 to 3 on page 55 to
display the Edit menu.
Using [K / L], select “Yes”.
Press [OK].
The title will be divided into two
new titles.
Both title names are identical, and
index pictures are reset to the first
scene at this point.
STANDBY-ON
VIDEO/TV
VCR
.@/:
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
Using [K / L], select “Title
Dividing”.
3
DISPLAY
OK
This operation may take a
while to be completed.
DISC MENU
SETUP
3
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
Recording
Press [PLAY B] and then
[PAUSE F] to decide the point
at which you will divide the title.
• It is convenient to use
[SKIP H / G], [REW E]
and [F.FWD D] for finding the
point to be divided.
Press [OK].
Confirmation window will appear.
RETURN
Data will be written onto the disc
momentarily.
2
3
4
CM SKIP RAPID PLAY
AUDIO DUBBING
Playing discs
Title Dividing
6
Getting started
2
4
Connections
You can divide one title into two
new titles.
DVD
First:
Yes
No
F
NOV/22/05 11:00AM CH12 EP
0:00:59
Editing
Changing the
Setup menu
E9A80UD_MWR20V6_02.indd 61
61
Others Español
EN
VCR functions
Note
• You cannot divide a title of
the disc on which the number
of recording title comes up to
the maximum (49), and the
number of recording chapter
comes up to the maximum
(254).
2006/01/17 17:58:24
Editing
Editing discs (Setup menu)
Putting name on disc
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
You can put title names on the
titles and change the names from
this menu.
3
Using [K / L], select “Edit Disc
Name”. Press [OK].
A window for entering a title name
will appear.
Press [STOP C] if you are
playing a disc.
STANDBY-ON
VIDEO/TV
.@/:
Edit Disc Name
a b c
No Disc Name
DVD
Disc
Total Titles
Disc Space Used
Disc Protect
Make Edit Compatible
1
DVD+RW
3
0:30:48
OFF
Needed
@ !
?
0:00:00
Using [K / L], select “Disc Edit”.
Press [OK].
Disc Edit menu will appear.
<DVD+RW>
Disc Edit
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
ABC
4
To enter a disc name, follow
the steps of “Guide to edit title
name” on page 56.
When you finish entering a title
name, press [OK].
Confirmation window will appear.
Make Edits Compatible
OPEN/CLOSE
DEF
1
2
3
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
1 2 3
Press [SETUP].
2
DVD
GHI
PQRS
A B C
First:
VCR
RETURN
2
3
4
5
DISPLAY
OK
DISC MENU
SETUP
1
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Edit Disc Name
Yes
No
No Disc Name
Disc
Total Titles
Disc Space Used
Disc Protect
Make Edit Compatible
<DVD+R/DVD-R>
DVD+RW
3
0:30:48
OFF
Needed
MY FAVORITE DISC
Disc Edit
0:00:00
Edit Disc Name
Disc Protect OFF
ON
Finalize
Using [K / L], select “Yes”.
Press [OK].
The name you entered will be
activated for the title.
Data will be written onto the disc
momentarily.
<DVD-RW>
Disc Edit
Edit Disc Name
Disc Protect OFF
5
ON
This operation may take a
while to be completed.
Erase Disc
Finalize
Note
• You cannot select “Disc Edit”
when finalized DVD disc is
inserted (DVD+R/DVD-R).
62
EN
E9A80UD_MWR20V6_02.indd 62
2006/01/17 17:58:25
Editing
Before you start
Editing discs (Setup menu) (cont’d)
Setting or releasing disc protect
DVD+RW
DVD+R
+VR
DVD-RW
+VR
DVD-R
Using [K / L]], select “Disc
Protect OFF
ON”. Press
[OK].
Confirmation window will appear.
Setting disc to protect
First:
Disc Protect OFF
DVD
STANDBY-ON
VIDEO/TV
.@/:
ON
No
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Yes
1
VCR
Connections
To prevent accidental editing, or
erasing the titles, you can protect
them.
2
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
2
3
Getting started
RETURN
Follow steps 1 to 2 on page 62 to
display the Disc Edit menu.
<DVD+RW>
DISPLAY
OK
DISC MENU
SETUP
Disc Edit
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
<DVD+R/DVD-R>
CHANNEL
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
Recording
Make Edits Compatible
3
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
This operation may take a
while to be completed.
Playing discs
Disc Edit
Edit Disc Name
Disc Protect OFF
ON
Finalize
Editing
<DVD-RW>
Disc Edit
Edit Disc Name
Disc Protect OFF
ON
Erase Disc
Finalize
Changing the
Setup menu
VCR functions
E9A80UD_MWR20V6_02.indd 63
EN
63
Others Español
Instructions continue on the next page.
2006/01/17 17:58:26
Editing
Editing discs (Setup menu) (cont’d)
Setting or releasing disc protect (cont'd)
Releasing disc from protect
First:
DVD
1
Follow steps 1 to 2 on page 62 to
display the Disc Edit menu.
<DVD+RW>
2
Using [K / L]], select “Disc
Protect”. Press [OK].
Confirmation window will appear.
Disc Protect ON
STANDBY-ON
VIDEO/TV
OFF
Yes
Edit Disc Name
Disc Protect ON
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
7
8
9
SPACE
TITLE
RETURN
2
3
Make Edits Compatible
Disc Edit
Edit Disc Name
OFF
Finalize
DEF
CLEAR/C-RESET
OFF
<DVD+R/DVD-R>
OPEN/CLOSE
0
Erase Disc
Disc Protect ON
DVD
ABC
PQRS
No
Disc Edit
VCR
.@/:
OK
DISC MENU
3
Using [K / L], select “Yes”.
Press [OK].
This operation may take a
while to be completed.
DISPLAY
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Data will be written onto the disc
momentarily.
<DVD-RW>
Disc Edit
Edit Disc Name
Disc Protect ON
OFF
Erase Disc
Finalize
64
EN
E9A80UD_MWR20V6_02.indd 64
2006/01/17 17:58:27
Editing
Editing discs (Setup menu) (cont’d)
Erasing disc
DVD+RW
+VR
DVD-RW
Video
DVD-RW
Using [K / L]], select “Erase
Disc”. Press [OK].
Confirmation window will appear.
Erase Disc
Yes
Press [STOP C] if you are
playing a disc.
DVD
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
DISPLAY
OK
DISC MENU
SETUP
No
CHANNEL
DVD
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
1
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
Follow steps 1 to 2 on page 62 to
display the Disc Edit menu.
Disc Edit
Edit Disc Name
ON
Erase Disc
Make Edits Compatible
SEARCH
3
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
STANDBY-ON
Making edits compatible
VIDEO/TV
VCR
.@/:
DVD+RW
Using [K / L]], select “Make
Edits Compatible”. Press [OK].
Confirmation window will appear.
Press [STOP C] if you are
playing a disc.
Yes
No
DVD
2
3
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
OK
TIMER VCR REC DVD REC REC MODE
3
ON
Erase Disc
Make Edits Compatible
TIMER SET SLOW
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
EN
E9A80UD_MWR20V6_02.indd 65
65
Others Español
• If “Make Edits Compatible”
is not selectable in “Disc
Edit” menu, you do not need
to perform “Make Edits
Compatible” to play in other
DVD players.
VCR functions
Disc Protect OFF
SETUP
CHANNEL
Follow steps 1 to 2 on page 62 to
display the Disc Edit menu.
Disc Edit
DISPLAY
DISC MENU
1
Edit Disc Name
DEF
1
GHI
Changing the
Setup menu
First:
Make Edit Compatible
ABC
OPEN/CLOSE
Editing
You will need to perform “Make
Edit Compatible” to play in other
DVD players.
2
DVD
Playing discs
• When you press “Yes”, all
contents of the disc will be
erased.
• When you erase the disc, the
contents of the disc will be
erased. (Its format is changed
to DVD+VR mode.)
• If you want to cancel erasing
the disc at step 2, select “No”.
Recording
Disc Protect OFF
OPEN/CLOSE
ABC
Getting started
First:
VCR
.@/:
Connections
You can erase all titles on a disc.
If you want to record on DVD-RW
formatted with other than DVD+VR
mode, erase all contents on the
disc and format it.
2
VIDEO/TV
Before you start
STANDBY-ON
2006/01/17 17:58:27
Changing the Setup menu
Tour of the Setup menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
1.Language setting
Pages 67-68
2.Display setting
Pages 68-69
3.Audio setting
Pages 69-70
Items (highlight is the default)
Disc Menu Language
English
French
Spanish
Contents
Set the language for disc menu.
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Angle Icon
ON
OFF
Screen Saver
OFF
5 minutes
10 minutes
Set the display or undisplay of multiangle icon in a case the DVD in
playback mode contains multi-angle
scene.
Set the time to work the screen
saver on the screen.
FL Dimmer
Auto
Bright
Dark
PCM
Digital Out
Dynamic Range
Control
4.Video setting
Page 71
5.Parental setting
Pages 72-73
Progressive Scan
ON
OFF
ON
OFF
Set whether the sound recorded
in 96kHz will be down sampled in
48kHz.
Set the type of sound signal which
outputs from the digital audio output
jack.
Compressing the range of sound
volume.
Set to the progressive scan mode (set
to “ON”) or to the interlace scan mode
(set to “OFF”).
Set the type of still image in pausing
playback.
Still Mode
Auto
Field
Frame
Parental Lock
All
level 8 to 1
Enter the current
four-digit password
Set the parental level of your DVD
discs.
ON
OFF
Set the Playback Control.
(Video CD only)
(Change password)
6.PBC setting
Page 73
48kHz
96kHz
Dolby Digital
PCM
Stream
Set the brightness of the front panel
display.
PBC (Video CD only)
Set and change the password.
Note
• If you change the setting in the Setup menu, the information of contents stays on even when the power is switched off.
• An item which is not currently available is grayed in the Setup menus.
66
EN
E9A80UD_MWR20V6_02.indd 66
2006/01/17 17:58:28
Changing the Setup menu
Before you start
Language setting
Press [STOP C] if you are playing a disc.
STANDBY-ON
1
VIDEO/TV
Press [SETUP].
OPEN/CLOSE
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
DVD
ABC
DEF
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Connections
2
VCR
.@/:
0
RETURN
Using [K / L], select “Language”. Press [OK].
Language menu will appear.
4
OK
DISC MENU
SETUP
1
CHANNEL
Using [K / L], desired item. Press [OK].
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
DVD
Language
Language - Disc Menu
English
Audio
Original
French
Subtitle
OFF
Spanish
DVD
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Other
Language
DVD
Language - Audio
Disc Menu
English
Original
Audio
Original
English
Subtitle
OFF
French
DVD
Other
Language
DVD
Language - Subtitle
Disc Menu
English
OFF
Audio
Original
English
Subtitle
OFF
French
DVD
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Spanish
VCR functions
Subtitle Language (Default : OFF)
Set the Subtitle language.
Changing the
Setup menu
Spanish
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
• When Original is selected, the
audio language will be in the
disc’s default language.
Editing
Audio Language (Default : Original)
Set the Audio language.
Playing discs
English
Recording
Disc Menu Language (Default : English)
Set the language for Disc Menu.
Disc Menu
Getting started
2
3
4
3
DISPLAY
Other
E9A80UD_MWR20V6_02.indd 67
EN
67
Others Español
Instructions continue on the next page.
2006/01/17 17:58:29
Changing the Setup menu
Language setting (cont’d)
If “Other” is selected, press 4-digit code using the Number buttons.
Language - Subtitle
DVD
Code Input
-
-
-
-
Note
• When you finish entering
the code, press [OK].
Refer to the language
code table on page 81.
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from1 the 2disc menu
if it is
3
available.
4
5
6
• Press [CLEAR/C-RESET]
or
[s] to erase
numbers
entered
8
9
7
incorrectly.
STANDBY-ON
VIDEO/TV
VCR
DVD
.@/:
ABC
OPEN/CLOSE
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
5
Press [SETUP] to exit.
DISPLAY
OK
DISC MENU
SETUP
5
Display setting
CHANNEL
Press [STOP C] if you are playing a disc.
STANDBY-ON
TIMER VCR REC DVD REC REC MODE
1
TIMER SET SLOW
VIDEO/TV
VCR
SEARCH
.@/:
Press [SETUP].
2
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Using [K / L], select “Display”. Press [OK].
Display menu will appear.
CMDVD
SKIP OPEN/CLOSE
RAPID PLAY
AUDIO DUBBING
ABC
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
2
3
3
Using [K / L], select a desired item. Press [OK].
DISPLAY
OK
DISC MENU
SETUP
1
CHANNEL
OSD Language (Default : English)
Set the language for the On Screen display.
TIMER VCR REC DVD REC REC MODE
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
TIMER SET SLOW
VCR DVD
Display
OSD Language
OSD Language
English
English
Angle Icon
ON
Français
Screen Saver
10 minutes
Español
VCR DVD
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Angle Icon (Default : ON)
Set to “ON” to show the Angle Icon during the playback.
DVD
Display
OSD Language
Angle Icon
English
ON
Angle Icon
ON
OFF
Screen Saver
10 minutes
68
DVD
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
EN
E9A80UD_MWR20V6_02.indd 68
2006/01/17 17:58:30
Changing the Setup menu
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
DVD
Display
DVD
Screen Saver
English
OFF
Angle Icon
ON
5 minutes
Screen Saver
10 minutes
10 minutes
OSD Language
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Connections
15 minutes
30 minutes
VCR DVD
Display
VCR DVD
FL Dimmer
English
Auto
Angle Icon
ON
Screen Saver
10 minutes
FL Dimmer
Bright
STANDBY-ON
VIDEO/TV
Bright
Dark
VCR
DVD
OPEN/CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
4
OK
Press [SETUP] to exit.
DISC MENU
4
SETUP
STANDBY-ON
VIDEO/TV
Choose the appropriate Audio settings for your external
equipment.
It will only affect a disc playback.
VCR
DVD
Playing discs
Audio setting
OPEN/CLOSE
.@/:
CHANNEL
ABC
DEF
1
2
3
TIMER
MODE
GHI VCR RECJKLDVD REC REC
MNO
4
5
6
TIMER SET SLOW CM SKIP RAPID PLAY
PQRS
TUV
WXYZ
8
7
Press [STOP C] if you are playing a disc.
9
SEARCH AUDIO DUBBING
CLEAR/C-RESET SPACE
TITLE
0
RETURN
2
3
Press [SETUP].
2
DISPLAY
OK
DISC MENU
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
1
SETUP
CHANNEL
TIMER VCR REC DVD REC REC MODE
• Dynamic Range Control
function is available only
on the discs which are
recorded in the Dolby
Digital format.
TIMER SET SLOW
Using [K / L], select “Disc Audio”. Press [OK].
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
VCR functions
Digital Out
Set the digital audio output.
DVD
Dynamic Range Control
ON
Digital Out
DVD
PCM
48kHz
Dolby Digital
Stream
E9A80UD_MWR20V6_02.indd 69
EN
69
Others Español
• Using [K / L], select a
setting. Press [OK].
Option window will appear.
Proceed to step A or B.
Instructions continue on the next page.
Changing the
Setup menu
Note
3
Disc Audio
Editing
1
Digital Out
Recording
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
• If “Auto” is1 selected,
the
3
2
display is shown brighter when
4
5
6
the power is on, darker when
8
7
the power is off. 9
Getting started
FL Dimmer (Default : Bright)
Set the brightness of front panel display.
You can choose one among “Auto”, “Bright” and “Dark”.
OSD Language
Before you start
Display setting (cont’d)
2006/01/17 17:58:32
Changing the Setup menu
Audio setting (cont’d)
A
Settings for PCM (Default : 48kHz)
• Using [K / L], select a setting. Press [OK].
Note
Your setting will be activated.
When playing disc with
48kHz :If your amplifier/decoder is NOT copyright protection
compatible with 96kHz PCM, select • Even if you select
“96kHz”, the sound will
“48kHz”. 96kHz sound will be output in be down sampled at
48kHz.
48kHz.
96kHz :If your amplifier/decoder is compatible with 96kHz PCM, select “96kHz”. 96kHz sound will be output.
DVD
Digital Out - PCM
48kHz
96kHz
B
Settings for Dolby Digital (Default : Stream)
Digital Out - Dolby Digital
• Using [K / L], select a setting. Press [OK].
Your setting will be activated.
PCM :Convert the Dolby Digital into PCM(2 channel).
When your amplifier/decoder is NOT compatible with Dolby Digital, set
to “PCM”.
Stream :Outputs Dolby Digital signals
When your amplifier/decoder is compatible with Dolby Digital, set to
“Stream”.
DVD
PCM
Stream
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
Disc Audio
DVD
Digital Out
Dynamic Range Control
ON
Dynamic Range Conrtol
ON
OFF
DVD
• Using [K / L], select a setting.
Press [OK].
Your setting will be activated.
STANDBY-ON
4
VIDEO/TV
Press [SETUP] to exit.
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
OK
DISC MENU
SETUP
4
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
70
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 70
2006/01/17 17:58:32
Changing the Setup menu
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
DEF
GHI
JKL
MNO
TUV
WXYZ
Progressive Scan (Default : OFF)
3
1
2
This unit is compatible with the Progressive Scan System. The feature provides you with the higher
definition
images
4
5
6
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
PQRS
1
9
TITLE
RETURN
Using [K / L], select “Playback”. Press [OK].
3
Using [K / L], select “Video”. Press [OK].
Using [K / L], select “Progressive Scan”. Press [OK].
DVD
Video - Progressive Scan
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
Activate?
Yes
No
6
7
Using [K / L], select “Yes” in 15 seconds. Press [OK].
Your setting will be activated.
8
Press [SETUP] to exit.
CHANNEL
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
•If your TV is compatible with Progressive
Scan (525p / 480p), you must use the
Component Video cable (commercially
available) to connect this unit to the TV.
(See Method 3 on page 14.) Make sure
the “P.SCAN” appears on the front panel
display.
If not, use the video cable and set the
Progressive scan mode to “OFF” or
press and hold [SETUP] for more than
3 seconds during DVD playback, so that
the “P.SCAN” on the front panel display
disappears.
•When selecting “No” or not pressing any
keys on the unit or remote control within
15 seconds at step 7, Progressive Scan
remains to be “OFF” (interlace scan).
STANDBY-ON
Press [STOP C] if you are playing a disc.
VIDEO/TV
Proceed to steps 1 to 3 above.
2
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
Using [K / L], select “Still Mode”. Press [OK].
RETURN
2
3
Using [K / L], select a setting. Press [OK].
Your setting will be activated.
Auto : Optimum resolution setting (Field of Frame) will be selected.
Field : Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
DISPLAY
OK
DISC MENU
SETUP
4
CHANNEL
TIMER VCR REC DVD REC REC MODE
CM SKIP RAPID PLAY
• Frame is 1 completed video image made
up of 2 fields (There are 30 frame per
second of NTSC video).
SEARCH
AUDIO DUBBING
EN
71
Others Español
Note
TIMER SET SLOW
VCR functions
3
E9A80UD_MWR20V6_02.indd 71
Changing the
Setup menu
1
Press [SETUP] to exit.
Editing
Still Mode (Default : Auto)
Set the type of still image in pausing playback. Select “Auto” usually.
4
1
8
Playing discs
Using [{ / B], select “Yes”. Press [OK].
SETUP
Recording
NOTE: If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
OK
DISC MENU
Getting started
4
DISPLAY
Connections
2
3
4
5
6
7
2
Using [K / L], select “ON”.
Press [OK].
Confirmation window will appear.
8
SPACE
0
Press [SETUP].
5
7
CLEAR/C-RESET
Before you start
Video setting
STANDBY-ON
2006/01/17 17:58:33
STANDBY-ON
Changing the Setup menu
VIDEO/TV
Settings for Parental lock level
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you
8
9
7
set, it will require you to enter a password before the disc will playback. This feature prevents
your
children
from viewing inappropriate material.
0
RETURN
2
3
4
Press [STOP C] if you are playing a disc.
1
Press [SETUP].
2
OK
DISC MENU
1
SETUP
CHANNEL
Note
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
TITLE
DISPLAY
• Parental lock function may not be
available to some discs.
• With some DVDs, it may be difficult to
find if they are compatible with parental
lock. Be sure to check if the parental
lock function operates in the way that
you have set.
• Record the password in case you forget it.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
3
SEARCH
Using [K / L], select “Parental Lock”. Press [OK].
4
Using [K / L], select the desired level. Press [OK].
CM SKIP RAPID PLAY
AUDIO DUBBING
Parental Lock (Default : All)
Set the Parental Lock level.
Playback
Parental Lock
DVD
Disc Audio
All
Video
8
DVD
7
Language
Parental Lock
6
All
5
• Using [K / L], change the
parental level. Press [OK].
Option window will appear
Proceed to step A or B.
4
3
2
1
A
A password has not been set yet.
Parental Lock
DVD
DVD
Parental Lock
Change password?
Yes
Yes
No
Password Input
- - - -
• Using the Number buttons, enter
a new password. Press [OK].
Your setting will be activated.
• Using [K / L], select “Yes”.
Press [OK]. If you select
“No”, proceed to step 5.
B
A password has been set already.
<Change the password>
Parental Lock
DVD
Parental Lock
DVD
DVD
Parental Lock
Change password?
Password Input
* * * *
• Using the Number buttons,
enter the current password.
72
Yes
No
• Using [K / L], select “Yes”.
Press [OK]. If you select
“No”, proceed to step 5.
Yes
Password Input
- - - -
• Using the Number buttons,
enter a new password. Press
[OK].
Your setting will be activated.
EN
E9A80UD_MWR20V6_02.indd 72
2006/01/17 17:58:34
STANDBY-ON
VIDEO/TV
VCR
DVD
.@/:
Changing the Setup menu
OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
5
6
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Settings for Parental lock level (cont’d)
0
5
RETURN
DISPLAY
Press [SETUP] to exit.
OK
DISC MENU
5
SETUP
Connections
CHANNEL
Note
TIMER VCR REC DVD REC REC MODE
• Press [CLEAR/C-RESET] to erase numbers entered incorrectly.
• When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using the
Number buttons in Password Input window. Password will be cleared and parental levels will be set to
“All”.
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Getting started
Settings for PBC (Playback Control)
PBC (Video CD only) (Default : ON)
You can select images or information on the menu screen by
activation PBC (Playback Control) function of Video CD.
STANDBY-ON
VIDEO/TV
VCR
.@/:
1
ABC
2
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Press [SETUP].
DVD
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Recording
Press [STOP C] if you are playing a disc.
Before you start
4
PQRS
0
RETURN
2
3
4
CD Playback Mode
Random Play
Program Play
PBC (Video CD only)
ON
DISPLAY
OK
DISC MENU
SETUP
1
CHANNEL
Playing discs
Using [K / L], select “CD Playback Mode”. Press [OK].
CD Playback menu will appear.
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
CM SKIP RAPID PLAY
Editing
SEARCH
AUDIO DUBBING
3
Using [K / L], select “PBC (Video CD only)”. Press [OK].
Changing the
Setup menu
PBC (Video CD only)
ON
OFF
4
Using [K / L], select “ON” or “OFF”. Press [OK].
Your setting will be activated.
E9A80UD_MWR20V6_02.indd 73
73
Others Español
EN
VCR functions
Note
• When playing Video CDs with PBC
function, some operations (e.g. select
and track repeat) cannot be performed.
Select PBC function “OFF” to perform
those operations.
• PBC setting turns to “ON” when loading
Video CDs with PBC function, thus,
even after setting PBC to “OFF” and
ejecting the Video CD then reloading
the Video CD, this setting turns to “ON”
automatically.
2006/01/17 17:58:35
VCR functions
Playback
xxxx
Playback
STANDBY-ON
VCR
1
Press [STANDBY-ON
] on the
remote control or the front panel
of the unit.
When you are playing a videotape,
turn the TV on and be sure to
select the input to which the unit is
connected.
VCR
Press:
VIDEO/TV
4
Press [PLAY B] to resume play.
5
Press [STOP C] to stop
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
6
Press [STOP C / EJECT A] on
the front panel of the unit to
eject the videotape.
1
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
DISPLAY
OK
DISC MENU
SETUP
3
CHANNEL
TIMER VCR REC DVD REC REC MODE
Press [PLAY B] to begin
playback.
[PAUSE F].
Playback will pause and sound will
be muted.
DVD
0
playback.
2
Insert a prerecorded videotape.
3
During playback, press
VCR
TIMER SET SLOW
SEARCH
2
4
5
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
• When a videotape without record tab is inserted, the unit will start
playback automatically.
• Tracking will be automatically adjusted upon playback. To adjust the
tracking manually, press [CHANNEL L / K] on the front panel of the
unit or [CHANNEL - / +] on the remote control.
Recording and One-touch Timer Recording
Recording
VCR
First:
VCR
Before recording, make sure:
• The desired channel is selected by
pressing the Number buttons or
[CHANNEL - / +] on the remote
control or [CHANNEL L / K] on
the front panel of the unit.
• There is a videotape with a
record tab in the unit.
• The desired recording mode is
selected in SP (standard play)
or SLP (super long play) mode
by pressing [REC MODE] on the
remote control.
Recording mode:
Tape speed
Type of tape
SP mode
SLP mode
Recording/Playback Time
T60
T120
T160
1hour
2hours 2-2/3hours
3hours
6hours
8hours
• Stereo or SAP is selected. Refer
to page 21.
• Refer to page 30 for instructions
on Timer Recording.
74
1
Press [VCR REC I] to begin the
STANDBY-ON
VIDEO/TV
recording.
To temporarily stop recording or
to resume it, press [PAUSE F].
After the unit has been in Pause
mode for 5 minutes, it will stop
automatically to protect the
videotape and the video head from
damage.
2
Press [STOP C] when the
recording is completed.
Accidental erasure prevention
To prevent accidental recording on a recorded videotape,
remove its record tab. To
record on it later, cover the
hole with cellophane tape.
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
OK
DISC MENU
1
SETUP
CHANNEL
2
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Record tab
Note
• To view one channel while recording another
1) While you are recording on the unit, press [VIDEO/TV].
2) At the cable box or satellite box, select the channel you want to
view.
If you have connected the unit to a cable box or satellite box, refer to
“Connection to a cable box or satellite box” section on page 15.
EN
E9A80UD_MWR20V6_02.indd 74
2006/01/17 17:58:36
VIDEO/TV
VCR
.@/:
VCR functions
DVD
OPEN/CLOSE
ABC
DEF
2
3
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Recording and One-touch
Timer Recording (cont’d)
xxxx
1
During normal recording, press
(Normal recording)
(0:30)
(8:00)
(1:00)
(7:30)
OK
To change the recording length
during the One-touch Timer
Recording, press [VCR REC I]
repeatedly until the desired length
appear.
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C].
Note
• The remaining recording time
will appear on the display panel
during an One-touch Timer
Recording. Press [DISPLAY] to
see it on the TV screen.
• You cannot pause a Onetouch Timer Recording.
• If OTR is finished in VCR
during playback or REC mode
in DVD, the VCR will be in
STOP mode and the DVD
keeps the current mode.
DISPLAY
DISC MENU
SETUP
1
CHANNEL
1
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Search
Index search
STANDBY-ON
VCR
INDEX SEARCH menu appears.
2
Using the Number buttons, enter
INDEX SEARCH
03
2
VCR
DVD
ABC
1
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
OK
DISC MENU
CURRENT PROGRAM
Beginning
of tape
OPEN/CLOSE
.@/:
SETUP
End
of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
3
CHANNEL
TIMER VCR REC DVD REC REC MODE
INDEX MARK
TIMER SET SLOW
1
SEARCH
VCR functions
the number of recordings you
wish to skip within 30 seconds.
start index search.
If you want to go in the forward
direction, press [F.FWD D].
If you want to go in the reverse
direction, press [REW E].
After index search, the VCR will
play the videotape automatically.
VIDEO/TV
CM SKIP RAPID PLAY
AUDIO DUBBING
Note
E9A80UD_MWR20V6_02.indd 75
75
Others Español
• Every time a videotape is
recorded, an index mark is
written on the videotape.
• You can make the index mark
up to 20.
EN
Changing the
Setup menu
1
Press [SEARCH] so that the
3
Press [REW E], [F.FWD D] to
Editing
An index mark will be assigned at
the beginning of each recording
you make. You may skip to a
specific marked point by following
the steps below.
VCR
First:
Playing discs
• Unlike a Timer Recording,
you can perform the following
operations during a One-touch
Timer Recording.
- Turning the power off
- Using [VCR REC I] or
[STOP C].
• When OTR is finished and
the power is turned off, the
unit will switch to the standby
mode automatically if a
Timer Recording has been
programmed. Press
[TIMER SET] to cancel the
standby mode for using the
unit continuously.
Recording
When One-touch Timer
Recording is finished, the unit
will turn off automatically.
RETURN
Getting started
[VCR REC I] to begin Onetouch Timer Recording.
You can select a fixed recording
time by pressing [VCR REC I]
repeatedly.
9
TITLE
Connections
This feature allows you to set the
recording length simply by pressing
[VCR REC I] on the remote control
or [RECORD I] (VCR) on the front
panel of the unit.
8
SPACE
0
One-touch Timer Recording (OTR)
VCR
7
CLEAR/C-RESET
Before you start
1
GHI
2006/01/17 17:58:36
VCR functions
Search
(cont’d)
xxxx
Time search
STANDBY-ON
VIDEO/TV
VCR
This feature allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
VCR
First:
1
Press [SEARCH] repeatedly so
that the TIME SEARCH menu
appears.
2
Using the Number buttons,
enter your desired time to skip
within 30 seconds.
You can set the time up to 9:59.
TIME SEARCH
2:50
VCR
.@/:
2
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
3
Press [REW E], [F.FWD D] to
start time search.
If you want to go in the forward
direction, press [F.FWD D].
If you want to go in the reverse
direction, press [REW E].
After time search, the unit will play
the videotape automatically.
Note
DISPLAY
OK
DISC MENU
SETUP
CHANNEL
3
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
1
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
• Index search and Time search are not available during recording.
• Press [STOP C] to stop the search.
• If the end of the videotape is reached during Search, this unit will
cancel the search and rewind the videotape.
Other operations
VCR
First:
VCR
Fast forward:
When the unit is in stop mode, press [F.FWD D] to fast forward the videotape.
Rewind:
When the unit is in stop mode, press [REW E] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [REW E], [F.FWD D] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still Mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded by one frame.
Your Selection
HIFI
If the picture begins to vibrate vertically during the Still Mode,
MONO
stabilize the picture by pressing [CHANNEL L / K] on the front panel Type of recorded tape L-channel R-channel
Monaural
Monaural
Monaural
non Hi-Fi tapes
or [CHANNEL - / +].
Hi-Fi tapes
If the picture is distorted or rolling vertically, adjust the vertical hold
recorded in
L
R
L+R
Hi-Fi stereo
control on your TV, if equipped.
Hi-Fi tapes
Main audio
Main audio
Main audio
recorded main
Counter Reset:
program
program
program
audio program
Press [CLEAR/C-RESET].
Hi-Fi tapes
Second audio Second audio Second audio
recorded second
To playback in slow motion:
program
program
program
audio program
Press [SLOW] during playback or the Still Mode.
If the noise bars appear on the TV screen, you can reduce it by
Note
pressing [CHANNEL L / K] on the front panel or [CHANNEL - / +].
• Still/Slow/Pause mode will be
Automatic Rewind:
automatically cancelled after
When a videotape is played or fast forwarded to its end, the videotape will
5 minutes to prevent damage
rewind to the beginning, stop and eject itself.
to the videotape and the
When you playback a videotape recorded in Hi-Fi stereo:
video head.
Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback
• To return to playback from
sound mode.
the Picture Search/Still/Slow
• If you have connected a stereo TV to this unit, select “HIFI”.
mode, press [PLAY B].
• If you have connected a monaural TV to this unit, select “MONO”.
76
EN
E9A80UD_MWR20V6_02.indd 76
2006/01/17 17:58:37
Others
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
Symptom
The power does not turn on.
TV program pictures are distorted.
Playback picture is distorted.
There is no sound.
VCR functions
Others Español
E9A80UD_MWR20V6_02.indd 77
77
Changing the
Setup menu
EN
Editing
The channel cannot be changed
from the channel you are recording.
Nothing was recorded even though •There was a power failure during recording.
you set the timer setting correctly. •The internal clock of the unit stopped due to a power failure that
lasted for more than 30 seconds. Reset the clock (pages 22-24).
•Disconnect the AC power cord from the AC outlet, and connect it
again.
•The program contains copy protection signals that restricts copying.
•The timer setting overlapped with another setting that has priority.
•The timer setting overlapped with another setting that has priority
Timer Recording is not completed
or did not start from the beginning.
(page 32).
•Disc space was not enough.
Timer Recording is impossible.
•Make sure
appears on the front panel display of this unit. If not,
press [TIMER SET].
The remote control does not work. •Check the antenna or cable connection to the main unit.
•Check the battery life of the remote control.
•Check if there is an obstacle between the sensor and the remote
control.
•Test the signal output. If OK, then possible remote sensor trouble.
(Refer to “IR SIGNAL CHECK” on page 5.)
•Press [DVD] or [VCR], whichever you need. Then, try again.
•Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly. •When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it again.
Playing discs
D
V
D
•
V
C
R
The playback picture or TV
program from the equipment
connected through the unit is
distorted.
Recording
TV channels cannot be changed.
Getting started
TV program reception does not fill
the screen.
Connections
There is no picture.
Remedy
•Check that the AC power cord is connected securely.
•(In case of power failure) Check the breaker.
•Press [TIMER SET] to cancel the timer standby mode.
•Re-connect the connecting cord securely.
•Check if the connecting cords are damaged.
•Check the connection to your TV (page 14).
•Check the RF output channel when you view a TV program using
RF connection.
•Switch the input selector on your TV (such as to “EXT1”) so that
the signal from this unit appears on the TV screen.
•Try to set the channels with “Auto Channel Preset” or “Manual Channel
Preset” in the Setup menu (pages 19-20).
•Select a channel of any TV program using the [CHANNEL - / +].
•Press [VIDEO/TV] if necessary.
•Adjust TV antenna.
•Adjust the picture (see the TV’s instruction manual).
•Place the unit and TV farther apart.
•Place the TV and any bunched antenna cables farther apart.
•Switch the input to TV.
•Connect the antenna cable correctly (page 14).
•Keep the equipment which may cause electrical disturbances, such
as a cellular phone, away.
•If the playback picture output from a DVD player, VCR or tuner
goes through the unit before reaching your TV, the copy-protection
signal applied to some programs could affect picture quality.
Disconnect the playback equipment in question and connect it
directly to your TV.
•Re-connect all connections securely.
•The connecting cord is damaged.
•Check the connections to the amplifier input.
•The input source setting on the amplifier is incorrect.
•The unit is in pause mode or in Slow forward / Slow reverse play.
•The unit is in fast forward or fast reverse mode.
•Set the TV’s input to “TV”.
Before you start
Troubleshooting
xxxx
2006/01/17 17:58:37
Others
Troubleshooting
xxxx (cont’d)
Symptom
There is no picture.
D
V
D
78
Remedy
•If Setup menu appears on the TV screen, press [RETURN] (or
[SETUP]) to exit.
Picture noise appears.
•The disc is dirty or flawed.
•If the picture output signal from the unit passes through your VCR
before reaching your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV’s S-VIDEO input.
There is no sound.
•If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio settings (pages 69-70).
•The disc is dirty or flawed.
Sound is noisy.
•The disc is dirty or flawed.
No DTS sound is output.
•This unit is not compatible with DTS sound.
•No disc is inserted.
The unit does not play back the
disc.
•A blank disc is inserted.
•The disc is upside down. Insert the disc with the labeled side facing up.
•The disc is not correctly inserted.
•The unit cannot playback certain discs (such as a CD-ROM) (page 41).
•The region code on the DVD-Video does not match the ones on the
unit (page 41).
•Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
•If the disc was recorded on another recorder, the unit cannot play
back the disc unless it is finalized (pages 26, 37).
•During the playback of two layered disc, picture may freeze for a
Playback image freezes for a
second.
moment when the 1st layer switches to the 2nd layer. This is not a
malfunction.
•Resume play was activated (page 45). Press [STOP C] twice.
The disc does not start playback
from the beginning.
•You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
The unit starts playing back the disc •The DVD-Video features an auto playback function.
automatically.
Some functions such as Stop,
•Depending on the disc, you may not be able to do some of those
Search, or Slow-motion Play
operations. See the instruction manual supplied with the disc.
cannot be performed.
•Multilingual tracks are not recorded on the DVD-Video, DVD-R or
The language for the sound track
cannot be changed.
DVD-RW being played back.
•The DVD-Video prohibits the changing of the language for the
sound track.
•Try changing the language using the DVD-Video’s menu.
•Multilingual subtitle are not recorded on the DVD-Video.
The subtitle language cannot be
changed or turned off.
•The DVD-Video prohibits changing of the subtitles.
•Try changing the subtitles using the DVD-Video’s menu.
The angles cannot be changed.
•Multi-angles are not recorded on the DVD-Video being played back.
•The angle-change operation is possible as long as the disc
contains a multi-angle portion. Actual change can be performed
when the portion has come up.
•The DVD-Video prohibits changing angles.
•Try changing the angles using the DVD-Video’s menu.
Recording does not stop immediately •It will take a few seconds for the unit to input disc data before
recording can stop.
after you press [STOP C].
Recording does not start immediately •A brand-new DVD+RW/DVD-RW has been inserted. It takes a
after you press [DVD REC I].
while for the unit to automatically format a DVD+RW/DVD-RW.
The disc tray does not open when
•It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc
you press [OPEN/CLOSE A].
data to the disc.
EN
E9A80UD_MWR20V6_02.indd 78
2006/01/17 17:58:37
Others
Connections
Symptom
Remedy
“Repairing” appears on the TV screen. •If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Wait for a moment.” message is
disappeared), a Repairing process will begin automatically just after
Repairing
turning the unit on again.
It may take several minutes up to about four hours.
D In a case you intend to cancel the
•If you intend to cancel the Repairing process, press
V Repairing process.
[OPEN/CLOSE A] on the front panel, then select “Yes” with
D
Do you want to cancel a repairing process ?
[{ / B] and press [OK]. After that, the disc tray will automatically
When selecting “Yes”, the disc may not be
open. In case the Repairing process is canceled, the disc MAY
usable.
NOT work.
Yes
No
Before you start
Troubleshooting
xxxx (cont’d)
Repairing
Solution
•Insert the standardized disc which
bear the marks on page 41.
•Insert the disc with the labeled side
facing up.
Region Error
--- Please eject the disc. --Playback is not authorized in
your region.
•The region of the DVD-Video disc
does not match the ones on the
unit.
•Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
The current selected parental
level prohibits playback.
•The current selected parental
level in the Setup menu prohibits
playback.
•Check the “Parental Lock” setting
(pages 72-73).
Recording Error
This program is not allowed to
be recorded.
•The recording function encountered •You cannot record copy prohibited
the copy prohibited program.
programs.
•You cannot record the copy-once
program.
Recording Error
Disc is full.
(No area for new recording)
•You are trying to record onto
the disc which has no space for
recording.
•Insert the recordable disc with
enough recording space.
EN
E9A80UD_MWR20V6_02.indd 79
79
Others Español
•Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (pages 25-26).
•Clean the disc with a cleaning cloth.
•Replace the disc.
•Release the disc protect setting in
the Disc Edit menu (pages 36, 64).
VCR functions
Recording Error
This disc is protected and not
recordable.
•You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
•The disc is dirty.
•The disc is damaged.
•You are trying to record on to the
protected disc which is set in the
Disc Edit menu.
Recording Error
Can not record on this disc.
Changing the
Setup menu
•You are trying to record the copyRecording Error
This program is not recordable once program.
in +VR mode.
Editing
Cause
•Unplayable disc is inserted in the
unit.
•The disc is upside down.
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
Playing discs
Error message
Recording
V
C
R
•Head cleaning for VCR may be necessary. Refer to “AUTO HEAD
CLEANING”.
•Adjust tracking control for better picture by pressing
[CHANNEL L / K] on the front panel or [CHANNEL - / +] while
you are playing a videotape.
The tape does not play.
•No videotape is inserted.
Recording does not start immediately •Make sure the videotape has a record tab when you record to a
after you press [VCR REC I].
videotape. If needed, cover the hole with cellophane tape.
•Check if a videotape is in this unit.
The remote control does not
function.
The motor rotates even when
•The motor may rotate for the duration of approximately 5 minutes
for efficient operation. This is not a malfunction.
playback / recording is stopped.
Getting started
Picture noise appears.
2006/01/17 17:58:38
Others
Troubleshooting
xxxx (cont’d)
Error message
Cause
Solution
Recording Error
You cannot record more than
49 titles on one disc.
(The maximum is 49)
•You are trying to record onto
the disc on which the number of
recording titles comes up to the
maximum (99).
•Delete unnecessary titles (page 55).
Recording Error
You cannot record more than
254 chapters on one disc.
(The maximum is 254)
•You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (254).
•This unit cannot delete the original
chapter. Delete unnecessary
chapter mark using other DVD
recorders. Delete unnecessary
chapter marks (page 58).
•This disc has no space to write the
Recording Error
Control Information when recording
You cannot record on this disc
or deleting contents.
as Control Information is full.
•When editing has been repeatedly
performed, the control Information
area may come up to be full even the
recording area has enough space.
•Delete unnecessary titles (page 55).
•When recordings are performed
Recording Error
repeatedly onto an unstable disc,
You cannot record on this disc
this area may come up to be full.
as Power Calibration Area is
•Every time you insert a disc for
full.
recording, the disc’s working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able to
record full 99 titles.
•Insert a new disc.
Recording Error
This disc is already finalized.
•You are trying to record onto the
disc already finalized.
•Release the finalizing for this disc
(page 37).
Recording Error
The disc has a different menu
layout. (Set “Replace Disc
Menu” to ON to rewrite the
menu.)
•You are trying to record onto the
+VR formatting disc that had been
recorded by the other recorder.
•Set “Replace Disc Menu” to “ON” to
rewrite the menu, after that you will
record to disc (page 27).
• If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
RF output switch
You can watch the TV programs
with the tuner of the unit. (Usually
channel 3 or 4 of the TV is
available for the RF converter
setting.) Be sure to connect the
unit to a TV using the RF cable.
Refer to page 14.
1
Select channel 3 on your TV.
2
Press [VIDEO/TV] on the remote
control.
• If noise appears, change the
RF output channel of the unit to
CH 4 by pressing [VIDEO/TV]
for 3 seconds. The RF output
channel will alternate between
CH3 and CH4 as follows.
STANDBY-ON
VIDEO/TV
.@/:
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
for more than
8
9
37 seconds
0
RETURN
DISPLAY
3 seconds
(RF on) CH4
OK
DISC MENU
SETUP
3 seconds
(RF on) CH3
3 seconds
(RF on) CH4
CHANNEL
3 seconds
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
80
VCR
• Each time the RF output
channel is changed, CH3 or
CH4 will appear on the front
panel display.
CM SKIP RAPID PLAY
AUDIO DUBBING
EN
E9A80UD_MWR20V6_02.indd 80
2006/01/17 17:58:38
Others
The system developed by Dolby
Laboratories to compress digital sound. It offers you sound of
stereo(2ch) or multi-channel audio
(up to 5.1ch).
Aspect ratio
Finalize
The width of a TV screen relative to
its height. Conventional TVs are 4:3
(in other words, the screen is almost
square); widescreen models are 16:9
(the screen is almost twice as wide as
it is high).
To make recorded contents on DVD
discs possible to be played back
on DVD players. With this unit, it is
possible to finalize DVD+R/DVD-RW/
DVD-R discs.
Regions associate discs and players
with particular areas of the world.
This unit will only play back discs
that have compatible region codes.
You can find the region code of your
unit by looking at the rear panel.
Some discs are compatible with
more than one region (or all regions).
Chapter
MP3 is a method of compressing
files. You can copy MP3 files on CDRW/R discs from the computer and
play back the files on this unit.
Just as a book is split up into several
chapters, a title on a DVD disc is usually divided into chapters. See also
Title.
Component video output
Digital audio
This function enables you to play
back interactive software using a
menu screen. See also Video CD.
PCM (Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can play
back sounds as realistic as possible
by converting even compressed Dolby
Digital and MPEG audio to PCM.
SAP (Secondary Audio Program)
Sub audio channel which is delivered
separately from main-audio channel.
This audio channel is used as an
alternate in bilingual broadcasting.
S-Video output
It delivers independently each signal
of color(C) and luminance(Y) to TV
as video signals, so that higher-quality picture will be materialized.
Title (DVD only)
A collection of chapters on DVD disc.
See also chapter.
Progressive Scan (525p/480p)
Track
A type of display that does not
split each frame into fields, and
instead scans directly through all the
scanlines of each frame in order.
Progressive Scan provides less flickering and higher image resolution
than traditional (525i/480i) TV signals. Refer to page 71 for instructions
on selective Progressive Scan mode.
Video CD
Audio CDs use tracks to divide the
content of a disc. The DVD equivalent is called a chapter. See also
Chapter.
The contents of a Video CD. When
playing back a Video CD with the
PBC function, the title menu will
appear automatically.
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
Language
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Code
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
Language
Code
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
EN
E9A80UD_MWR20V6_02.indd 81
81
Others Español
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
VCR functions
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Changing the
Setup menu
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
Code
Editing
Language code
Language
Playing discs
An indirect representation of sound
by numbers. During recording, the
sound is measured at discrete intervals (44, 100 times a second for
CD audio) by an analog-to-digital
converter, generating a stream of
numbers. On playback, a digital-toanalog converter generates an analog signal based on these numbers.
See also Sampling frequency and
Analog audio.
PBC (Playback Control)
(Video CD only)
The rate which sound is measured
by a specified interval to turn it into
digital audio data. The numbers of
sampling in one second defines as
sampling frequency. The higher the
rate, the better the sound quality is.
Recording
This is a video signal format that
conveys each of three principal
colors of light (red, blue and green)
through different signal lines. This
allows the viewers to experience picture colors as original as it is. There
are several signal formats, including
Y/PB/PR and Y/CB/CR.
MP3 (MPEG Audio Layer 3)
Sampling frequency
Getting started
Regions code
An electrical signal that directly represents sound. In contrast, digital
audio which can be an electrical signal, but is an indirect representation
of sound. See also Digital audio.
Connections
Dolby Digital
Before you start
Glossary
xxxx
Analog audio
2006/01/17 17:58:39
Others
Frequently Asked Questions
–– Can I record on CD-RW/R?
No, this unit records only DVDs.
–– Can I play back DVD-Video that is bought in another country?
Possible only if the region code of the disc is 1 and ALL.
–– Is this unit JPEG compatible?
No.
–– Can I connect the unit to my PC?
No, you cannot control the unit by PCs.
Specifications
General
System
DVD-Video, DVD+RW/R, DVDRW/R, CD-DA, CD-RW/R, Video
Cassette Tape
VCR video heads
Four heads
Power requirements AC120 V, 60 Hz
Power consumption 30 W (standby: 3.0 W)
Weight
9.5 lbs ( 4.3 kg )
Recording
Recording format
Video Recording format
(DVD+RW, DVD+R, DVD-RW
DVD-R),
Video format
(DVD+RW, DVD+R, DVD-RW,
DVD-R)
Recordable discs
DVD+Rewritable,
DVD+Recordable,
DVD-Rewritable,
DVD-Recordable
Tuner
Receivable channels
VHF
2-13ch
UHF
14-69ch
CATV
C1-C125ch
Input / Output
Video input
Input 1 (rear), 2 (front)
Input level
1 Vp-p (75W)
Jacks
RCA jacks
S-Video input
Input 1 (rear), 2 (front)
Y (Iuminance)
- Input level 1 Vp-p (75W)
C (color)
- Input level 286 mVp-p (75W)
Jacks
4 pin mini DIN
Audio input
Input 1 (rear), 2 (front) L/R
During audio input 2V rms (47kW)
Jacks
RCA jacks
Component video output
Output level
Y: 1.0 Vp-p (75W),
PB/CB, PR/CR: 0.7 Vp-p (75W)
Jacks
RCA jacks
Dimensions
(width x height x depth) 17 3/16” x 3 15/16” x 10 5/16”
(435 x 99.5 x 262 mm)
Operating temperature
Operating humidity
TV format
41Fº to 104Fº (5ºC to 40ºC)
Less than 80% (no condensation)
NTSC
Video recording format
Sampling frequency
13.5MHz
Compression format
MPEG
Audio recording format
Sampling frequency
48kHz
Compression format
Dolby Digital
RF Converter
Converter output
Video output
Output level
Jack
S-Video output
Y (Iuminance)
- Output level
C (color)
- Output level
Jack
Audio output
During audio output
Jacks
Digital audio output
Output level
Jack
VHF/UHF antenna
input/output terminal
Built-in VHF converter
VHF channel 3 or 4
1 Vp-p (75W)
RCA jack
1 Vp-p (75W)
286 mVp-p (75W)
4 pin mini DIN
Output 1, 2 L/R
2V rms (47kW)
RCA jacks
500 mVp-p (75W)
RCA jack
VHF/UHF set 75W
Note:
The specifications and design of this product are subject to change without notice.
82
EN
E9A80UD_MWR20V6_02.indd 82
2006/01/17 17:58:40
MEMO
Before you start
Connections
Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
VCR functions
Others Español
2006/01/17 17:58:40
E9A80UD_MWR20V6_02.indd 83
83
EN
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco.
Puede elegir entre distintos tipos de discos DVD grabables.
Este grabador de DVD puede grabar los siguientes tipos de
discos.
Paso 2: Encienda
la unidad.
Mando a distanci
STANDBY-ON
VIDEO/TV
Por ejemplo, cuando desea grabar repetidamente en
el mismo disco, seleccione el disco de tipo regrabable
DVD+RW/DVD-RW.
Cuando desea guardar grabaciones sin alterarlos, un DVD no
regrabable DVD+R/DVD-R puede ser más conveniente.
Paso 3: Coloque un disco en blanco.
1
STANDBY-ON
VIDEO/TV
VCR
DVD
2
OPEN/CLOSE
VCR
DVD
.@/:
ABC
1
2
3
GHI
JKL
MNO
VIDEO/TV
VCR
DVD
DEF
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
STANDBY-ON
Seleccione la entrada
a la que
OK
se conectará
la unidad
DISC MENU
SETUP en su
VIDEO/TV
VCR
DVD OPEN/CLOSE
TV.
.@/:
ABC
1
2
3
GHI
JKL
MNO
DEF
4
CHANNEL
5
6
PQRS
TUV
WXYZ
7
8
9
Paso 4: Seleccione la
0
velocidad
de
grabación.
TIMER VCR REC DVD REC REC MODE
CLEAR/C-RESET SPACE
TITLE
TIMER SET SLOW
RETURN
STANDBY-ON
SEARCH
CM SKIP RAPID PLAY
DISPLAY
AUDIO DUBBING
OK
OPEN/CLOSE
DISC MENU
.@/:
3
ABC
DEF
.@/:
ABC
1
2
3
1
2
3
JKL
MNO
GHI
JKL
MNO
4
5
6
4
5
6
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
RETURN
DISPLAY
4
SETUP
DEF
GHI
8 el mode
9
7
Seleccione
DVD
CLEAR/C-RESET SPACE
TITLE
Para abrir
0
CHANNEL
TIMER VCR REC DVD REC REC MODE
STANDBY-ON
DISPLAY
RETURN
TIMER SET SLOW
VIDEO/TV
VCR
OK
DISC MENU
DVD
OPEN/CLOSE
SEARCH
OK
SETUP
CHANNEL
OPEN/CLOSE
DISC MENU
.@/:
ABC
SETUP
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
7
CLEAR/C-RESET
CHANNEL
SPACE
CM SKIP RAPID PLAY
AUDIO DUBBING
9
TITLE
Para cerrar
0
TIMER VCR REC DVD REC REC MODE
Cargando TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
TIMER VCR REC DVD REC DISPLAY
REC MODE
RETURN
TIMER SET SLOW
Formateando
SEARCH
CM SKIP RAPID PLAY
90%
OK
AUDIO DUBBING
DISC MENU
SETUP
DVD+RW/DVD-RW
solamente
HQ (1Hr)
0:58
Esta operación puede demorar en reconocerse.
CHANNEL
TIMER VCR REC DVD REC REC MODE
84
ES
TIMER SET SLOW
SEARCH
E9A80UD_MWR20V6_02.indd 84
CM SKIP RAPID PLAY
AUDIO DUBBING
2006/01/17 17:58:41
.@/:
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
Fácil grabación de DVD (cont.)
STANDBY-ON
Paso 5: Eleccione
el canal
des
eado.
3
1
2
VIDEO/TV
VCR
DVD
.@/:
ABC
GHI
JKL
OPEN/CLOSE
DEF
STANDBY-ON
5
VCR
PQRS
DVD
8
.@/:
CLEAR/C-RESET
ABC
SPACE
1
2
0
JKL
MNO
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
OK
Paso 7: Pare
la
grabación.
DISC MENU
RETURN
DISPLAY
CHANNEL
9
DEF
TITLE
3
MNO
4
5
DISPLAY
PQRS
TUV
WXYZ
OK
DISC MENU
TIMER VCR REC DVD REC REC MODE
SETUP
6
8
9
TITLE
0
SETUP
TIMER SET SLOW
SEARCH
TIMER VCR REC DVD REC REC MODE
CHANNEL
AUDIO DUBBING
CHANNEL
DISPLAY
Escrit de datos
OK
DISC MENU
CM SKIP RAPID PLAY
Getting started
OK
SPACE
RETURN
SETUP
0
6
JKL
7
DISPLAY
WXYZ
GHI
CLEAR/C-RESET
GHI
OPEN/CLOSE
RETURN
DISC MENU
RETURN
DEF
3
2
Paso 16: Grabe
en
4
5
6
discos
8
9
7
DVD.
MNO
TUV
7
ABC
0
OPEN/CLOSE
Connections
4
VIDEO/TV
.@/:
DVD
SETUP
TIMER SET SLOW
SEARCH
90%
CM SKIP RAPID PLAY
AUDIO DUBBING
1
TIMER VCR REC DVD REC REC MODE
SP (2Hr)
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
TIMER SET SLOW
CM SKIP RAPID PLAY
2
CHANNEL
AUDIO DUBBING
EMPTY TITLE
1:41:17 SP (2Hr)
CH 12
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
Esta operación puede
demorar en completarse.
AUDIO DUBBING
I
Playing discs
Sugerencia 1: Reproduzca el contenido grabado
Puede seleccionar el título que desea reproducir de un menú indicado y
empiece a reproducir inmediatamente. El contenido grabado se puede
acceder fácilmente con un simple procedimiento de elegir un título en la
pantalla del menú.
El contenido de un disco DVD se divide generalmente en títulos. Los títulos pueden dividirse a su vez en capítulos.
Sugerencia 2: Edite el disco grabado
Pare/Comience
Título 1
Título 2
Capítulo 1 Capítulo 2 Capítulo 3
Capítulo1 Capítulo 2
Comience la
Puede editar lo siguiente desde el menú del título o el menú deTrack
ajuste.
1 Track 2
Pare la
grabación
Changing the
Setup menu
grabación
La edición de discos es fácil. Esta unidad ofrece convenientes funciones
de edición para discos
formateados en el modo DVD+VR.
• Borrado de títulos
Pare la
grabación
Editing
¿Qué son títulos y capítulos?
Comience la
grabación
Track 3 Track 4 Track 5
• Poniendo nombres en títulos
• Seleccionando / Borrando marcas de capítulos
VCR functions
• Ocultando capítulos
• Seleccionando imágenes para índices
• División de un título (DVD+RW/DVD-RW solamente)
• Poniendo un nombre en disco
Finalización de un disco
• Esto permitirá que un disco DVD+R/DVD-RW/DVD-R que se grabe en nuestra unidad pueda ser reproducido
en un reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
ES
85
Others Español
• Después de finalizar un disco, no puede editar los contenidos en ese disco.
• Los discos DVD+RW no requieren finalización, pero sí “Compatibilizar edic.” para reproducirse en otras
unidades después de ediciones. Puede editar el disco después de “Compatibilizar edic.” .
E9A80UD_MWR20V6_02.indd 85
Recording
SEARCH
Before you start
3
MNO
STANDBY-ON
VCR
DEF
2
JKL
Español
VIDEO/TV
ABC
1
GHI
2006/01/17 17:58:42
Español
Reproducción con
videograbadora
xxxx
VCR
1
Presione [STANDBY-ON ] en
el mando a distancia o el panel
frontal de la unidad.
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
VCR
Presione:
STANDBY-ON
VIDEO/TV
VCR
.@/:
DVD
ABC
2
3
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
2
Coloque una cinta pregrabada y
presione [PLAY B] para empezar la reproducción.
Durante la reproducción, presione [PAUSE F].
Se hará una pausa de
reproducción y se silenciará el
sonido.
1
DEF
1
GHI
RETURN
3
OPEN/CLOSE
DISPLAY
OK
DISC MENU
3
SETUP
CHANNEL
2
4
5
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
4
Presione [PLAY B] para continuar la reproducción.
5
Presione [STOP C] para detener
la reproducción.
6
Presione [STOP C / EJECT A]
en el panel frontal de la unidad
para expulsar la cinta.
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación,
la unidad empezará a
reproducir automáticamente.
• El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione [CHANNEL L / K] en
el panel frontal de la unidad o
los botones [CHANNEL - / +]
en el mando a distancia.
86
ES
E9A80UD_MWR20V6_02.indd 86
2006/01/17 17:58:42
.@/:
ABC
2
3
JKL
MNO
4
5
6
TUV
WXYZ
PQRS
Español
DEF
1
GHI
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
DISPLAY
OK
Grabación
VCR
Primero:
DISC MENU
VCR
Tiempo de
grabación/reproducción
T60
T120
T160
1 hora
2 horas 2-2/3 horas
3 horas
6 horas
8 horas
2
Presione [STOP C] cuando se
complete la grabación.
Prevención contra borrado accidental
Para evitar una grabación
por accidente en un casete
grabado, rompa la lengüeta
de grabación. Para volver a
grabar posteriormente, cubra
el orificio con cinta adhesiva.
Lengüeta de
grabación
1
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en
la unidad, presione
[VIDEO/TV].
2) En la caja de cable o caja
de satélite, seleccione el
canal que desea ver.
Si se conectó la unidad a
una caja de cable o caja de
satélite, consulte la sección
de “Connection to a cable box
or satellite box” en la página
3
1
2
15.
STANDBY-ON
VIDEO/TV
1
(0:30)
(8:00)
(1:00)
(7:30)
.@/:
ABC
DEF
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
RETURN
DISPLAY
OK
DISC MENU
SETUP
1
CHANNEL
1
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
SEARCH
CM SKIP RAPID PLAY
AUDIO DUBBING
Nota
• El tiempo de grabación remanente aparecerá en la pantalla durante
una grabación con temporizador de un toque.
Presione [DISPLAY] para que aparezca en la pantalla de TV.
• No puede hacer una pausa en una grabación con temporizador
de un toque.
• Si se termina el OTR en la videograbadora durante el modo de
reproducción o REC en DVD, la videograbadora estará en el modo
STOP y la DVD se mantiene en el modo actual.
• A diferencia de una grabación con temporizador, durante una
grabación con temporizador de un toque usted puede realizar las
operaciones siguientes.
- Desconectar la alimentación
- Utilizar [VCR REC I] o [STOP C].
ES
E9A80UD_MWR20V6_02.indd 87
87
Others Español
Cuando termina la grabación
con temporizador de un toque,
la unidad se desconectará
automáticamente.
OPEN/CLOSE
VCR functions
(Canal a grabar)
DVD
Changing the
Setup menu
Durante la grabación normal,
presione [VCR REC I] para
empezar la grabación con temporizador de un toque.
Puede seleccionar un tiempo de
grabación determinado presionando
repetidamente [VCR REC I].
VCR
0
Para cambiar la longitud de
tiempo durante la grabación
con temporizador de un toque,
presione repetidamente
[VCR REC I] hasta que aparezca
la longitud deseada.
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
[STOP C].
CM SKIP RAPID PLAY
AUDIO DUBBING
Editing
Esta función permite seleccionar
la longitud de la grabación
simplemente presionando
[VCR REC I] en el mando a
distancia o [RECORD I] (VCR)
en el panel frontal de la unidad.
TIMER SET SLOW
SEARCH
Grabación con temporizador de un toque (OTR)
VCR
TIMER VCR REC DVD REC REC MODE
Playing discs
• Se selecciona Estéreo o SAP.
2
CHANNEL
Recording
Velocidad
de la cinta
Tipo de cinta
Modo SP
Modo SLP
Presione [VCR REC I] para
empezar la grabación.
Para detener temporalmente la
grabación o continuarla, presione
[PAUSE F]. Después de que la
unidad haya estado en el modo
de pausa durante 5 minutos, se
detendrá automáticamente para
proteger al cinta y el cabezal de
video contra cambios.
Getting started
Velocidad de grabación:
1
Connections
Antes de grabar, asegúrese de que:
• Se seleccionó el canal deseado
presionando los botones
numéricos en el mando
a distancia o los botones
[CHANNEL - / +] en el mando a
distancia o [CHANNEL L / K] en
el panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad
de grabación deseada en SP
(reproducción estándar) o SLP
(reproducción de super larga
duración) presionando [REC
MODE] en el mando a distancia.
SETUP
Before you start
RETURN
Grabación y grabación con temporizador
de un toque (VCR)
xxxx
2006/01/17 17:58:43
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original
retail purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures due to defects in material
or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP, or damage
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this product or damage which
results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EX OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquires,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E9A80UD_MWR20V6_02.indd 88
1VMN22213 / E9A80UD ★★★★★
2006/01/17 17:58:43
1
Connections
Remote Control
(Back of TV)
VIDEO
AUDIO IN
[Cable Box or Satellite Box]
DVD Recorder
with Video Cassette Recorder
Playable discs
1
DIGITAL
AUDIO OUT
DVD
S-VIDEO
AUDIO
OUT
COMPONENT
VIDEO OUT
L
OUT
DVD-VIDEO
DVD-R
(VIDEO mode, Finalized)
DVD+RW
CD-DA (AUDIO CD)
DVD+R
CD-RW
(CD-DA FORMAT, MP3 files)
DVD+R Double Layer
CD-R
(CD-DA FORMAT, MP3 files)
DVD-RW
(VIDEO mode, Finalized)
Video CD
PB
/CB
R
L
L
R
R
Indoor or
Outdoor Antenna
Connect
ANTENNA
IN
OR
IN - VIDEO - OUT
From Cable
Company
(No Cable Box)
PR
/CR
OUT
(Back of this unit)
I You can use either A/V or RF cables to connect to TV for operation.
2
Setup
2 – 1 Watching on TV
Press [STANDBY-ON
to turn the unit on.
is a trademark of DVD Format/Logo Licensing Corporation.
]
Input Mode Names for Common TV Brands
STANDBY-ON
VIDEO/TV
VCR
.@/:
Region codes
The number inside the globe refers to region of the world.
This unit can play DVDs that are labeled for ALL regions or for Region 1.
DVD
ABC
AUX
Panasonic
TV/VIDEO
Curtis Mathis
LINE1, LINE2, 00, 90,
91, 92, 93
RCA
INPUT, TV/VCR, 00, 90,
91, 92, 93
GE
INPUT, TV/VCR, 00, 90,
91, 92, 93
Samsung
TV/VIDEO
Hitachi
INPUT, AUX
Sanyo
VIDEO
JVC
VIDEO, VIDEO1, VIDEO2,
VIDEO3
Sharp
00
Kenwood
AUX
Sony
VIDEO1, VIDEO2, VIDEO3
LXI-Series
00
Toshiba
TV/GAME
Magnavox
AUX CHANNEL
Zenith
00
DEF
1
2
3
GHI
JKL
MNO
Initial Setup
Admiral
OPEN/CLOSE
1.Switch the input selector4 on your
TV6 to an
5
PQRS channel
TUV
WXYZ
appropriate external input
8
9
(usually near channel 0).7
SPACE
TITLE
2.Press a button on theCLEAR/C-RESET
TV’s original
remote control
(see the table below) toRETURN
select0an external
input
DISPLAY
channel until the DVD recorder’s picture appears.
2 –2
Recordable discs
OK
DISC MENU
SETUP
Set up the following items when turning on the unit for the first time.
This unit can record to the following disc types.
IThis unit formats discs with DVD+VR mode.
IDVD-R/DVD+R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased
many times.
IWe strongly recommend for good recording quality:
SONY DVD+RW 4x, MAXELL DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, TDK DVD+R 4x/8x/16x,
MAXELL DVD-RW 4x, MAXELL DVD-R 8x/16x
IDiscs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+RW 4x, VERBATIM DVD+R 8x
VERBATIM DVD-RW 2x, VERBATIM DVD-R 8x, JVC DVD-RW 4x, MAXELL DVD-R 16x
Logo
DVD/VCR
IN - AUDIO - OUT
IN
COAXIAL
Logo
Disc
S-VIDEO
Y
Attributes
Logo
Initial Setup
Initial Setup
English
Channel Preset
CH 1
Français
Auto Presetting Now
CHANNEL
Español
TIMER VCR REC DVD REC REC MODE
Press [OK] to Channel Preset.
Using [K/ L], select your
desired
Then the unit will start getting available channels in your area.
language and press [OK].
TIMER SET SLOW CM SKIP RAPID PLAY
Initial Setup
SEARCH
AUDIO DUBBING
Initial Setup
Initial Setup
Clock Setting
Attributes
---- / -- / ---- ( ---- )
-- : ----
DVD+RW
DVD+R
IN
From Cable or
Satellite Company
OR
2
Connect
RF
cable
(supplied)
This unit is compatible to play the following discs.
Logo
Disc
Connect
Audio
cable
(supplied)
Connect
Video
cable
(supplied)
MWR20V6
OUT
4
3
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW
DVD-R
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
Press [OK] to Clock Setting.
Press [OK] again.
JAN / 02 / 2006 ( MON )
12: 00 AM
Using [K/ L], enter the date
(month / day / year).
Press [{ / B] to move the cursor.
Press [OK]. TV Program will automatically
appear. (usually near channel 0)
Follow to the back side of this sheet.
E9A80UD_QG_EN.indd 1
2006/01/18 11:47:25
.@/:
3
ABC
DEF
1
2
3
GHI
JKL
MNO
1
2
3
4
5
6
GHI
JKL
MNO
PQRS
TUV
WXYZ
4
5
6
7
8
9
PQRS
TUV
WXYZ
CLEAR/C-RESET
SPACE
TITLE
7
8
9
CLEAR/C-RESET
SPACE
TITLE
DVD Recording
0
RETURN
DISPLAY
Easy
Recording
OK
3 – 1
DISC MENU
First:
DVD
SETUP
Select the recording
mode.
Disc Size
CM SKIP
RAPID PLAY
STANDBY-ON
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
STANDBY-ON
8
7
9
Select the desired
0
channel.
CLEAR/C-RESET
VIDEO/TV
SPACE
VCR
.@/:
1
ABC
2
VCR
GHI
DEF
DVD
JKL
OK
4
1
PQRS
TITLE
DVD OPEN/CLOSE
STANDBY-ON
DISPLAY
RETURN
VIDEO/TV
8cm Disc
AUDIO DUBBING
VCR
DVD OPEN/CLOSE
.@/:
3
OPEN/CLOSE
MNO
5
2
TUV
DEF
SETUP
7
4
CLEAR/C-RESET
8
5
SPACE
9
6
TITLE
PQRS
TUV
0
8
WXYZ
.@/:
DISC MENU
6
3
WXYZ
ABC
GHI
JKL
7
RETURN
CLEAR/C-RESET CHANNEL
SPACE
MNO
9
DISPLAY
TITLE
VIDEO/TV
VCR
(good)
HQ (1Hr)
18 min
SP (2Hr)
36 min
SPP (2.5Hr)
45 min
LP (3Hr)
54 min
EP (4Hr)
72 min
SLP (6Hr)
108 min
(poor)
HQ (1Hr)
STANDBY-ON
60 min
(good)
SP (2Hr)
120 min
DVD
1
2
GHI
JKL
MNO
SLP
6 (6Hr)
4
5
PQRS
TUV
WXYZ
SEARCH
VIDEO/TV
7
8
9
CLEAR/C-RESET
SPACE
TITLE
SEARCH
SPACE
TITLE
ABC
DEF
RETURN
1
0
2
DISPLAY
GHI
JKL
MNO
4
5
6
PQRS
TUV
OK
WXYZ
SETUP
SPACE
TITLE
9
DISPLAY
OK
CM SKIP RAPID PLAY
AUDIO DUBBING
CHANNEL
8:00
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
CM SKIP RAPID PLAY
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
After all recordings, finalize your disc!
will appear on the front panel display.
Editing titles
DISPLAY
OK
First:
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
DVD+RW
DVD+R
DVD-RW/DVD-R
DVD
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
TITLE
6.
---
7.
---
8.
---
DISPLAY
Mode
DVD
VCR
OK
SETUP
Set start and end time.
TIMER SET SLOW
1. JAN/01
Date
2.
--1.
--3.
--2.
--4.
--3.
--5.
--4.
--6.
--5.
--7.
--6.
--8.
--7.
---
--:-Start
--:-End
DVD
VCR
E1 DVD
CH
8.
Timer Programming
Start
12:57AM
2.
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
CH
DVD
VCR
8
DVD
1:57AM
2.
---
---
3.
---
4.
---
4.
---
5.
---
5.
---
6.
---
6.
---
7.
---
7.
---
8.
---
8.
---
Select the recording
mode.
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
12:57AM
Start
1. JAN/01
---
2.
--:--
E1 DVD
Timer Programming
3.
Start
CH
12:57AM
Date
Mode
2.
Timer Programming
VCR DVD
End
DVD
VCR
Mode
Select the media to
record.
VCR DVD
End
Start
1. JAN/01
Mode
---
Date
Date
Mode
Select the channel
number to record.
CM SKIP RAPID PLAY
SEARCH AUDIO DUBBING
Timer Programming
VCR DVD
CH
VCR DVD
End
12:57AM
1:57AM
CH
DVD
VCR
8
DVD
Mode
VCR DVD
End
CH
1:57AM
8
DVD
VCR
Mode
DVD HQ
STANDBY-ON
VIDEO/TV
VCR
DVD
OPEN/CLOSE
.@/:
ABC
1
2
3
GHI
JKL
MNO
4
5
PQRS
TUV
DEF
6
7
8
CLEAR/C-RESET
SPACE
Playback
WXYZ
9
TITLE
0
Insert a disc.
RETURN
DISPLAY
OK
DISC MENU
STANDBY-ON
SETUP
Play!
Playable
OPEN/CLOSE
VIDEO/TV
POWER ON
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
SETUP
This Unit
CHANNEL
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
DVD player
VCR
.@/:
Not Playable
Not finalized
Not performing Make Edits Compatible after editing titles
CHANNEL
ᵈᵷᶍᶓᴾᶁᵿᶌᶌᶍᶒᴾᶄᶇᶌᵿᶊᶇᶘᶃᴾᶍᶐᴾᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᴾᶇᶌᴾᶍᶒᶆᶃᶐᴾᵢᵴᵢᴾᶐᶃᶁᶍᶐᶂᶃᶐᶑᵌ
DVD
ABC
OPEN/CLOSE
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR/C-RESET
SPACE
TITLE
0
TIMER VCR REC DVD REC REC MODE
RETURN
TIMER SET SLOW
---
CH
Open the disc tray.
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
STANDBY-ON
DISC MENU
JKL
DISC MENU
4
Finalize DVD-RW/-R/+R discs after recording.
Make edits compatible on DVD+RW discs after editing.
Stop recording.
0
RETURN
5.
Date
OPEN/CLOSE
2
---
End
Timer Programming
AUDIO DUBBING
AUDIO DUBBING
ABC
---
4.
Date
Start
End
Timer Programming
7:30
When the unit reaches the specified time,
the unit will be turned off automatically.
CM SKIP RAPID PLAY
STANDBY-ON
DVD
---
3.
1. JAN/01
AUDIO DUBBING
VCR
---
2.
1. JAN/01
Set the Timer Standby
mode.
0:30
1.
Start
Set the date.
SETUP
SEARCH
AUDIO DUBBING
3
GHI
TIMER VCR REC DVD REC REC MODE
TIMER VCR REC DVD REC REC MODE
CM SKIP RAPID PLAY
1
SEARCH
8
CHANNEL
(Normal Recording) 1:00
CM SKIP RAPID PLAY
DEF
CHANNEL
3
DISC MENU
0:30
CHANNEL
.@/:
E9A80UD_QG_EN.indd 2
9
OPEN/CLOSE
.@/:
SEARCH
SEARCH
DVD
CLEAR/C-RESET
TIMER SET SLOW
TIMER VCR REC DVD REC REC MODE
VIDEO/TV
8
VCR
Timer Recording is now set.
Recording times appear on the TV screen
(30 minutes to 8 hours).
Recording will start.
I
2
6
RETURN
SETUP
ABC
1
RETURN
VCR DVD
WXYZ
0
Press repeatedly to select desired recording time.
TIMER SET SLOW
SEARCH
5
TUV
CLEAR/C-RESET
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
4
PQRS
(poor)
SETUP
TIMER VCR REC DVD REC REC MODE
CHANNEL
3
MNO
STANDBY-ON
7
CHANNEL
AUDIO DUBBING
2
JKL
DISC MENU
OK
.@/:
DEF
1
ENTER!
DISPLAY
DISC MENU
STANDBY-ON
CM SKIP
RAPID PLAY
GHI
7
240 min
CM SKIP RAPID PLAY
TIMER SET SLOW
Timer Programming
ABC
VIDEO/TV
0
RETURN
OPEN/CLOSE
CLEAR/C-RESET
Select any blank line with [K/L] and press
[OK].SPACE
AUDIO
DUBBING
VCR
DVD OPEN/CLOSE
.@/:
360 min
DVD
Timer Programming list appears.7
TIMER VCR REC DVD REC REC MODE
TIMER SET SLOW
OPEN/CLOSE
EP3 (4Hr)
VCR
0
12cm Disc SPP (2.5Hr) 150 min
LP
180 min
.@/:
ABC
DEF (3Hr)
OK
Record!
• You can set up to 8 programs (once, daily or weekly).
OK
• Be sure
to set the SETUP
clock before starting a timer programming.
DISC MENU
CHANNEL
RETURN
OKDVD REC DISPLAY
TIMER VCR REC
REC MODE
DISC MENU
SETUP
DISC MENU
SEARCH
DISPLAY
Recording Recording Video/Sound
Quality
mode
time
0
TIMER SET SLOW
VIDEO/TV
Timer Recording
RETURN
Date
TIMER VCR REC DVD REC REC MODE
SEARCH
VIDEO/TV
3 – 2
Press [TIMER].
How to select the recording mode:
CHANNEL
TIMER SET SLOW
STANDBY-ON
0
Stop playing.
CHANNEL
REC DVD
REC REC
MODE
If the title menu appears, using [K/ L], selectTIMERa VCR
title
and
press
[OK].
(Then select “Play” with [K/ L] when playing titles recorded by this unit.)
TIMER SET SLOW
SEARCH
DISPLAY
CM SKIP RAPID PLAY
AUDIO DUBBING
disc
tray
guide
CM SKIP RAPID PLAY
AUDIO DUBBING
1VMN22214 / E9A80UD_QG ★★★★★
OK
DISC MENU
SETUP
2006/01/18 11:47:30