P6-P8H61E
2
2
DDR3 1600 Qualified Vendors List (QVL)
Vendors
Part No.
Size
SS/DS Chip Brand
Chip NO.
Timing
Voltage
ocket support (Op
1 DIMM 2 DIMM
AM2U16BC4P2
4GB
DS
A-DATA 3CCD-1509A EL1126T
A-DATA
CMP4GX3M2A1600C9(XMP)
4GB(2 x 2GB)
DS
9-9-9-24
1.65V
CORSAIR
TR3X6G1600C8 G(XMP)
6GB(3 x 2GB)
DS
8-8-8-24
1.65V
CORSAIR
BL25664BN1608.16FF(XMP)
6GB(3 x 2GB)
DS
Crucial
F3-12800CL7D-4GBRM(XMP) 4GB(2 x 2GB)
DS
7-8-7-24
1.6V
G.SKILL
F3-12800CL9T-6GBNQ(XMP)
6GB(3 x 2GB)
DS
9-9-9-24
1.5V~1.6V
G.SKILL
16GB ( 4x 4GB
GET316GB1600C9QC(XMP)
DS
9-9-9-28
1.6V
GEIL
)
2GB
DS
KINGMAX FLGE85F-B8KJ9A FEIS(XMP)
KVR1600D3N11/2G-ES
2GB
DS
KTC
D1288JPNDPLD9U
11-11-11-28 1.35V-1.5V
KINGSTON
DS
9-9-9-27
1.65V
KINGSTON KHX1600C9D3X2K2/4GX(XMP) 4GB(2 x 2GB)
PartNum.
Size
SS/DS Chip Brand
ChipNum.
Timing - Dimm
Vol.
Vendor
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4 DIMM Slots
• 1 DIMM: Supports one module inserted in any slot as Single-channel memory configuration
• 2 DIMM: Supports 2 modules inserted into both the blue or black slots as two pairs of Dual-channel memory configuration
-When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than
3GB is recommended.
-It is recommended to install the memory modules from the slots for better overclocking capability.
-The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default
state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.