Renesas Single-Chip Microcomputer SH7203 Technical information

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
Renesas
USB Device
Renesas Electoronics
www.renesas.com
2009.10
State-of-the-art technologies of the Renesas <EQUSB>
support the future of society.
The USB specification established to connect the PC peripheral equipment is currently used
for a number of different products in various scenarios, such as office equipment, mobile devices,
AudioVideo equipment, and industrial equipment.
For topical On-The-Go, Embedded Host, and advanced Wireless USB,
Renesas continues to provide you with the ideal USB devices to meet customer needs.
Easy to design
A wide variety of lineup from wired USB to wireless USB
allows easy design of devices, which are so user-friendly.
High quality
The Renesas <EQUSB> passed USB Compliance Program.
It has been already used in a wide variety of USB embedded
products in the market.
High performance
The original IP library of the Renesas <EQUSB> allows
customers to select the most suitable system. Its excellent
development environment and our powerful alliances with
various partner vendors fully support your system development.
■
Peripheral
Road Map
Wireless
USB
Hi-Speed
USB2.0
Host
Wireless USB ASSP
Wireless USB-IP
USB ASSP
32bit MCU SuperH Family
USB-IP
USB ASSP
32bit MCU SuperH Family
USB-IP
USB ASSP
1
Full-Speed
USB2.0
32bit MCU SuperH Family
32/16/8bit MCU
H8SX/H8S/M16C/740 Family
32bit MCU SuperH Family
USB-IP
USB-IP
2
Yamaha Corporation
Conference microphone speaker (PJP-25UR)
using M30245
Sony Corporation
IC Recorder (ICD-SX77/66)
using M66592
Ricoh Company, Ltd.
Digital Camera (GR DIGITAL)
using M66592
Hitachi-Omron Terminal Solutions, Corp.
Finger Vein Authentication device
using M66291
Pioneer Corporation
Plasma TV
(North America: PDP-5010FD,
Europe: PDP-LX508D)
using M66596
Roland Corporation
Audio Capture (UA-101)
using M66592
Brother Industries, Ltd.
Sewing & Embroidery
(Innovis4000)
using SH7727
Roland Corporation
Synthesizer (V-Synth GT)
using R8A66597
Panasonic Communications
Interactive Panaboard (UB-8325)
using M66291
H
ub
Sony Corporation
Visual IC Recorder (ICD-CX50)
using M66592
OLYMPUS Imaging Corporation
Digital Camera (E-1)
using M66591
ub
H
Hitachi, Ltd.
HDD/DVD Hybrid Camcorder (DS-HS803)
using M66592
OLYMPUS Imaging Corp.
IC Recorder (WS-331M)
using M66592
Fostex Company
DVD/HD Location Recorder(PD-606)
using M66596
Yamaha Corporation
High-end microphone speaker for conference
(PJP-50USB)
using M66291
Sony Corporation
Stereo IC Recorder
(ICD-MX50)
using M66592
Sony Corporation
Linear PCM Recorder
(PCM-D1)
using M66592
ub
H
Brother Industries, Ltd.
Sewing & Embroidery (PR-620)
usina SH7727
Fuji Photo Film Co., Ltd.
Digital Camera FinePix S7000
using M66591
AI Solutions
Barcode label printer
(Marvelio® TP4030)
using M66592
Fostex Company
Live Recording Mixer (LR16)
using M66596
H
ub
OLYMPUS Imaging Corp.
Digital Camera (μ-10 DIGITAL)
using M66291
OLYMPUS Imaging Corp.
IC Recorder (DS-50)
using M66592
OLYMPUS Imaging Corp.
Linear PCM Recorder (LS-10)
using M66592
Fuji Photo Film Co., Ltd.
Digital Camera FinePix F710
using M66591
Nagano Japan Radio Co., Ltd.
Nameliner (880pro)
using M66591
Roland Corporation
Recreational keyboard
(VIMA RK-300)
using R8A66597
Sony Corporation
IC Recorder (ICD-ST40)
using M66291
Roland Corporation
Music Workstation
(Fantom-G8/G7/G6)
using M66592, R8A66597
Roland Corporation
24bit 96kHz WAVE/MP3 RECORDER
(R-09HR)
using M66592
Ricoh Company, Ltd.
GelSprinter (Aficio GX e3350N)
using M66592
Panasonic Corporation
System Solutions Company
e Passport Reader (JT-P100MR)
using M66592
Yamaha Corporation
Electone STAGEA (ELS-01U/ELS-01CU)
using SH7727
Yamaha Corporation
Portable Keyboard (PSR-E413)
using 38K0
Sony Corporation
Fingerprint Identity
Token "PUPPY"
FIU-850-C04, FIU-850-D04, FIU-880-C04
using M66592
Ricoh Company, Ltd.
Digital Camera (Caplio 500Gwide)
using M66592
Renesas <EQUSB>,
already available in every field.
Various Renesas USB device
USB MCU Road Map (SuperH Family)
Renesas USB device Website
★:New product ★★:Under development
We will comprehensively support
customer's development with rich
development support information.
Hi-Speed USB2.0
SH7264★★
SH7265★
http://www.renesas.com/en/usb
SH7205★
Please use this contact information for technical
inquiries, etc.
Various searches
Please use the various search functions.
SH7786★★
SH7764★
SH-2A 200MHz Dual Core
Host + Function
SH7263
Contact
SH7262★★
SH2A-FPU 144MHz
Host + Function
SH7652
SH7203
SH7670★
SH2A-FPU 200MHz
Host + Function + LCDC
SH2A-FPU 200MHz
Host + Function+ Ether
SH7724★★
SH-4A 324MHz
Host + Function
★
SH-4A 500MHz
Host + Function
SH7723★
SH7722
SH-4A 400MHz
Host + Function
SH4AL-DSP 333MHz
Function
Low/Full-Speed USB2.0
SH7763
SH7760
SH-4 200MHz
Host + LCDC
The hardware manual, the software manual,
etc., are available for download.
Document
SH7727
SH3-DSP 160MHz
Host + Function + LCDC
Information regarding each device can be
accessed from the expansion plan, too.
Product expansion
SH7720
SH7721
SH3-DSP 133MHz
Host + Function +
LCDC + SSL
SH3-DSP 133MHz
Without SSL
Full-Speed Function
Hi-Speed Function
SH7216★★
SH7705
SH-3 133MHz
Low-power
Consumption
Relevant documents, such as application notes,
etc., in addition to the product specifications of
each device, are also available for downloading.
Lineup
SH-4A 266MHz
Host + Function +
Gbit Ether + PCI
USB ASSP Road Map
Renesas Original Host
SH-2A 100MHz,Function
SH7285★
SH7286★
SH-2A 100MHz
Function
SH-2A 100MHz
Function
OHCI Host
EHCI Host
USB MCU Road Map (M16C, H8SX, H8S, 740 Family)
★:New product
★:New product
32bit MCU
Wireless USB
Bulk application specialized,
high-speed 10-bit A/D
and 10-bit D/A, built-in I2C bus
★
H8SX/1655★
H8SX/1665★
R8A66580
Wireless USB Peripheral
Low-power consumption, Small package
S/W upward compatibility with wired USB
Hi-Speed USB2.0
Bulk application specialized,
Built-in I2C bus, 1MB Flash
Bulk application specialized,
Built-in I2C bus
Hi-Speed Host
H8SX/1658R
H8SX/1653
Bulk application specialized,
high-speed 10-bit A/D
and 10-bit D/A, sub-clock,
built-in I2C bus
H8SX/1668R
H8SX/1663
Sub clock, SDRAM I/F supported,
Bulk application specialized,
built-in I2C bus
H8SX/1668M
H8SX/1658M
Bulk application specialized,
SDRAM I/F supported,
sub-clock, built-in I2C bus,
1MB Flash
16bit MCU
M66596
USB HS IP
Hi-Speed
1-to-1 Host/
Peripheral function
Small Package
USB-IP Development
M66592
R8A66597
H8S/2456R★
2 Port Host/1 Port Peripheral,
Corresponding to WTR
optional Small Package
H8S/2218
ISO Equipped,
Low-power Consumption,
Small Package
Full Function
Multiple Endpoint
M66591
HS Host IP
Bulk Application,
Small Package
USB HOST IP Development
Strengthened FIFO,
Peripherals,3V,
External Bus Compatible
Bulk application
H8S/2472
specialized,
RTC, sub-clock Bulk application specialized,
H8S/2456★
Bulk application specialized,
SDRAM I/F supported, built-in I2C bus
Ethernet, built-in I2C bus
H8S/2454★
H8S/2215
H8S/2212
M30245
Bulk application
specialized,
low cost version
M16C/6C★
Bulk application specialized,
Built-in I2C bus
M16C high-speed
clock supported
8bit MCU
M66291
System Integration,
Enhanced Functions
Full-Speed USB2.0
5
FS Host IP
USB FS IP
USB HOST IP Development
38K0Group
Bulk Application Specialized,
Small Package, Single-chip
38K2Group
Small Package
Compound Hub
USB-IP Development
Full-Speed Function
Full-Speed Hub
Full-Speed Function
Hi-Speed Function
Renesas Original Host
Wireless USB Function
Full-Speed USB2.0
6
Selection Map
■Wireless USB
ASSP
★:New product ★★:Under development
R8A66580★
Package
Operating
Operation Voltage
Temperature
(V)
(℃)
100-pin
LFBGA
Power Source
3.0 to 3.6
I/O1.6 to 2.0/2.7to3.6
−20
to 85
DMA
interface
2ch
Other Functions
PLL
Frequency 16-bit CPU bus interface
multiplying 8-bit split bus interface
circuit
spec
Speed*6
Transfer type
Wireless
USB 1.0
Peripheral
53.3/80/106.7/160/
200/320/400/480Mbps
Ctr.,Bulk,Int.
Wireless USB Function
FIFO Buffer(Byte)
Endpoints(Pipes)
Tototal*4
32K
8 Endpoints
Supported
encryption type
Built-in
Connection using
AESMAC-PHY Interface
128CCM
Ver.1.2
UWB PHY
USB
Port
USB
Host
USB
Function
Speed*6
Transfer type*7
Endpoints(Pipes)
Host
Function
1
○
○*3
HS, FS, LS
(Host 0nly)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
USB Function
FIFO Buffer(Byte)
Tototal*4
Max*5
16K
Application
Other Functions
Built-in USB Pull-down Resistor (In Host Mode),
Built-in USB output Resistor(In Full-Speed),
Built-in USB Pull-up Resistor (In Peripheral Mode) Built-in USB Termination Resistor (In Hi-Speed)
2048
Vbus Detector
Consumer electronics /
Digital home appliances, DVC, DSC,
IC recorder, DTV, DVD recorder
SELECTION
MAP
■USB2.0
Wireless ASSP
Operation Voltage
(V)
Package
Power Source 3.0 to 3.6
I/O 1.6 to 2.0/
2.7 to 3.6
64-pin LQFP,64-pin FBGA Power Source 1:1.35 to 1.65、
Power Source 2:3.0 to 3.6,
64-pin VFBGA
I/O1.6 to 2.0/2.7 to 3.6
Power Source 1:1.35 to 1.65、
64-pin LQFP,64-pin FBGA
Power Source 2:3.0 to 3.6,
64-pin VFBGA
I/O1.6 to 2.0/2.7 to 3.6
Power Source 3.3 to 3.6、
I/O 1.7 to 2.0/
80-pin LQFP
2.7 to 3.6
Power Source 3.3 to 3.6、
48-pin LQFP
I/O 2.7 to 3.6/
52-pin VQFN
4.5 to 5.5
80-pin LQFP
81-pin LFBGA
R8A66597
M66596
M66592
ASSP
M66591
M66291
Operating
Temperature
(℃)
DMA
interface
−20 to 85
−40 to 85*1
2ch
−20 to 85
Other Functions
PLL
−20 to 85
2ch
−20 to 85
1ch
−20 to 85
2ch
USB
Host
USB
Function
Speed*6
Transfer type*7
2
○
○*3
HS,FS,
LS(Host only)
Ctr.,Bulk,Int.,Iso.
1
○
○*3
HS,FS
Ctr.,Bulk,Int.,Iso.
1
ー
○
HS,FS
Ctr.,Bulk,Int.,Iso.
ー
1
ー
○
HS,FS
Ctr.,Bulk,Int.
1
ー
○
FS
Ctr.,Bulk,Int.,Iso.
16-bit CPU bus interface
(For address/data bus,
there are separate type
and multiplex type options)
8-bit split bus interface
2ch
Frequency
multiplying
circuit
Endpoints(Pipes)
Host
Function
USB
Port
10 Endpoints
USB Function
FIFO Buffer(Byte)
Total*4
Max*5
8.5K
2048
5K
2048
Built-in USB Pull-down Resistor
(In Host Mode),
Built-in USB Pull-up Resistor
(In Peripheral Mode)
8 Endpoints
5K
2048
Built-in USB Pull-up Resistor
ー
7 Endpoints
3.5K
512
USB Pull-up Power Supply Output Terminal,
Power Management Support Output Terminal
ー
7 Endpoints
3K
1024
USB Pull-up Power Supply Output Terminal
8 Endpoints
Application
Other Functions
Built-in USB output Resistor(In Full-Speed),
Built-in USB Termination Resistor (In Hi-Speed)
R8A66597/
M66596
Electronic music instrument,
printer, scanner, modem,
cellular phone, DVC, DSC,
other PC peripheral equipment
SH7724/
SH7722/
SH7723
Vbus Detector
ー
8/16-bit CPU bus interface
Operating
Temperature
(℃)
Package
Operation Voltage
(V)
SH7722
449-pin BGA
1.15 to 1.3V
(266MHz)
,
1.25 to 1.35V
(333MHz)
/
3.0 to 3.6V
(I/O)
−20 to 70/
−40 to 85
DMAC x 6ch
149
SH7723★
449-pin BGA
1.15 to 1.3V
3.0 to 3.6V
(I/O)
−20 to 70/
−40 to 85
DMACx12ch
170
SH7724★★
449-pin BGA
441-pin POP
1.2
3.0 to 3.6/1.8(I/O),1.8V(DDR)
−20 to 70/
−40 to 85
DMACx12ch
180
176-pin QFP(SH7262)
208-pin QFP(SH7264)
1.1 to 1.3V/
3.0 to 3.6V(I/O)
−20 to 85/
−40 to 85
DMACx16ch
99(SH7262)
129(SH7264)
★★
SH7262/SH7264
SH7670★
256-pin BGA
1.1 to 1.3/3.0 to 3.6
(I/O) −20 to 70/
−40 to 85
SH7265/SH7205★
404-pin BGA
1.1 to 1.3/3.0 to 3.6
(I/O)
SH7764★
404-pin BGA
SH7203
SH7263
DMAC etc.
SH7265/
SH7205/SH7263/
SH7203
Ctr.,Bulk,Int.,Iso.
8 Endpoints
4K
2048
1
○
○*3
HS,FS,
LS(Host only)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
16K
2048
2
1
1
○
○*3
HS,FS,LS(Host only)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
16K
2048
1
○
○*3
HS,FS,LS(Host only)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
16K
2048
One-segment navigation,
Portable navigation, Portable multimedia player,
Camera applicable equipment
○
○*3
HS,FS,
LS(Host only)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
8K
2048
Audio Equipment,
Car Audio Equipment, Home Audio
Ctr.,Bulk,Int.,Iso.
10 Endpoints
8K
2048
DVD Recorder, Thin TV Set, Audio Compo,
Printer, Copy, Industrial Equipment
2048
Audio Equipment,
Car Audio Equipment, Home Audio
1
○
○*3
HS,FS,
LS(Host only)
Ctr.,Bulk,Int.,Iso.
10 Endpoints
5K
2048
Home Audio, Home Server,
Car Navigation
1
○
○*3
HS,FS
Ctr.,Bulk,Int.,Iso.
8 Endpoints
8K
2048
Audio Equipment, Car Audio Equipment,
Industrial Equipment
2
○
○
HS,FS,LS
Ctr.,Bulk,Int.,Iso.
127 Endpoints 10 Endpoints
10K
2048
Amusement Equipment、Network Equipment,
Industrial Equipment
2
○
○
FS,LS
(Host only)
Ctr.,Bulk,Int.,Iso.
127 Endpoints
6 Endpoints
544 (double buffer), Host common memory:
DDR-SDRAM space
DSP,LCDC,Built-in RTC
2
○
○
FS,LS(Host only) Ctr.,Bulk,Int.,Iso.(Host only) 127 Endpoints
4 Endpoints
288 (double buffer), Host common memory: SDRAM space
USB pull-up control is a general purpose I/O
FAX, Printer, DSC, AV Equipment
117
DSP,LCDC,MMCIF,
SSL Accelerator,RTC,IrDA,I2C Bus
2
○
○
6 Endpoints
544 (double buffer), Host common memory:
SDRAM space of area 3
With USB Pull-up Control Terminal
FAX, DSC, Printer, IP-phone,
Mobile Display Terminal
DMACx8ch
70
(MAX)
LCDC,I2C Bus, Audio interface
1
○
ー
FS,LS
Ctr.,Bulk,Int.,Iso.
127 Endpoints
ー
ー
Simple Navigation, FA, POS, AV Equipment
DMACx8ch
DTCx1ch
110
EtherC,I2C,RSPI,CAN,MTU2,
MTU2S,CMT,SCI,SCIF,A/D
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
−20 to 85/
−40 to 85
DMACx8ch
99
SH7786★★
593-pin BGA
1.25V(typ)/1.5V(typ)/
3.0-3.6V
(I/O)
−20 to 85/
−40 to 85
DMACx24ch
60
SH7763
449-pin BGAFP
1.15 to 1.35/3.0 to 3.6(I/O)
2.3 to 2.7(DDR)
−20 to 75
DMACx6ch
107
240-pin HQFP 240-pin CSP 1.75 to 2.05/3.6(I/O)
(160MHz)
−20 to 75
DMACx4ch
104
−20 to 75
DMACx6ch
SH7705
HS,FS
10K
1.1 to 1.3/3.0 to 3.6
(I/O)
SH7285/SH7286★
○
10 Endpoints
240-pin QFP
32bit
ー
One-segment navigation,
Portable navigation, Portable multimedia player,
Camera applicable equipment
One-segment navigation,
Portable navigation, Portable multimedia player,
Camera applicable equipment
Ctr.,Bulk,Int.,Iso.
77
1.4 to 1.6/3.0 to 3.6
(I/O)−20 to 75/−40 to 85
1
Application
Other Functions
HS,FS,
LS(Host only)
DMACx6ch
256-pin BGA
USB Function
FIFO Buffer(Byte)
Total*4
Max*5
○*3
−20 to 85/
−40 to 85
176-pin LQFP(20mm□)
176-pin LQFP(24mm□)
3.0 to 3.6
−40 to 85
176-pin BGA(13mm□)
SH7285:144-pin LGFP(20mm□)
−20 to 85/
SH7286:176-pin LQFP(20mm□) 3.0 to 3.6V/4.5 to 5.5V
−40 to 85
176-pin LQFP(24mm□)
208-pin LQFP 208-pin CSP 1.4 to 1.6/3.0 to 3.6
(I/O) −20 to 75
Endpoints(Pipes)
Host
Function
○
1.1 to 1.3/3.0 to 3.6
(I/O)
SH7216★★
Transfer type*7
2
107
SH7760
Speed*6
○*3
DMACx14ch
1.4 to 1.6/3.0 to 3.6
(I/O)
USB
Function
○
−20 to 70/
−40 to 85
256-pin CSP
(17mm□)
256-pin CSP
(11mm□)
SSI, NAND Flash interface,
SDHI, IIC3, VDC3
USB
Host
1
94
SH7720
SH7721
H.264/MPEG4 codec
JPEG codec, LCDC
NAND Flash I/F, camera I/F, IIC, SCIF
H.264/MPEG4 codec
LCDC,SDHI camera I/F,IIC,SCIF
ATAPI,2DG
H.264/MPEG4 codec
LCDC、5MpixcelcameraI/F、JPU、SPU、FSI
ATAPI、2DG、NAND Flash Interface (MMC4.2)
USB
Port
DMACx8ch
DTCx1ch
DMACx4ch
EtherCSTIF,SSI,SDHI,IIC3
RCAN-TL1,SSIF,AND/
NAND Flash interface
IIC3,ATAPI
EtherC,LCDC SSI,
NAND Flash interface
I2Cbus,ATAPI
LCDC
NAND Flash interface
I2Cbus,CAN
PCI-e, DU/EtherC
NAND Flash interface
TMU, I2C, SCIF, SSI etc.
Giga Ethernet Controller PCI Bus Controller
LCDC, Security Accelerator,
MMCIF,RTC,IrDA,I2C Bus
SCI,SCIF,SSU,I2C,
SH7286:111
(SH7286 only)
,MTU2,MTU2S,
SH7285:55 CAN
CMT,POE,A/D,D/A
(SH7286 only)
105
RTC,IrDA
FS,LS
(Host only)
Ctr.,Bulk,Int.,Iso.
127 Endpoints
With USB Pull-up Control Terminal
Network Equipment,
IT Terminal, Digital Appliance
Host-shared memory:Internal RAM 8KByte
288
AC servo, Multi-purpose inverter,
Robot Camera applicable equipment
128
Vbus Detector
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
128
AC servo, Multi-purpose inverter,
Robot Camera applicable equipment
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
DSC, DVC, Printer, FAX
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
POS Scanner
144-pin LQFP
(20mm□)
145-pin LGA
(9mm□)
EXDMAx2ch
DMAx4ch DTCx85ch
101
H8SX/1655★
120-pin LQFP
(14mm□)
EXDMAx2ch
DMAx4ch DTCx85ch
84
I2Cx2ch, SCIx6ch, High-speed10bitA/D,
10bitD/A bus interface,PPG,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
POS Scanner
H8SX/1668R
H8SX/1668M
144-pin LQFP(20mm□)
176-pin BGA(13mm□)
EXDMAx2ch
DMAx4ch DTCx85ch
101
I2Cx2ch,SCIx6ch, bus interface,PPG
SDRAMI/F,Sub-clock circuit,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
POS Scanner
120-pin LQFP
(14mm□)
EXDMAx2ch
DMAx4ch DTCx85ch
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
84
10bitD/A bus interface,PPG,SDRAMI/F,
32K Timer,E10A compliant
I2Cx2ch,SCIx6ch,
bus interface,PPG,E10A compliant
POS Scanner
101
I2Cx2ch, SCIx6ch, bus interface,PPG
SDRAMI/F,Sub-clock circuit,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
POS Scanner
84
I2Cx2ch,SCIx6ch, bus interface,PPG,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
POS Scanner
128
Ether Net, SCI x3ch,I2Cx6ch, SSUx1ch
CRCcalculation circuit,bus interface,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
288
64
Notebook PC, Memory card reader,
PC server, other PC peripheral devices
H8SX/1663
144-pin LQFP
(20mm□)
H8SX/1653
120-pin TQFP
(14mm□)
H8S/2472★
176-pin BGA
(13mm□)
H8S/2456R/2456★
144-pin LQFP
(20mm□)
EXDMACx2ch
DMACx4ch DTCx85ch
114
I2Cx4ch, SCIx5ch,SSUx1ch,bus interface
SDRAMI/F(Only R-version),E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
312
128
Printer, Scanner,
other peripheral devices
H8S/2454★
120-pin LQFP
(14mm□)
DMACx4ch
DTCx85ch
94
I2Cx4ch, SCIx5ch,SSUx1ch
Bus interface,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
312
128
Printer, Scanner,
other peripheral devices
H8S/2215
120-pin TQFP
(14mm□)
112-pin BGA
(10mm□)
DMAx4ch
DTCx85ch
75
Bus interface,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.Iso.
ー
9 Endpoints
1288
256
Printer, Scanner,
other peripheral devices
H8S/2218
100-pin TQFP(12mm□)112-pin BGA(10mm□)
DMAx4ch
69
Bus interface,Sub-clock circuit,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
456
128
Printer, Scanner, other peripheral devices
DMAx4ch
37
Sub-clock circuit,E10A compliant
1
ー
○
FS
Ctr.,Bulk,Int.
ー
4 Endpoints
456
128
Printer, Scanner, other peripheral devices
DMAx4ch
88
I2Cx1ch,SCIx6ch, CRCcalculation circuit(2 types),Sub-clock circuit
1
ー
○
FS
Ctr.,Bulk,Int.
ー
7 Endpoints
584
128
Printer, scanner, other peripheral equipments,
consumer equipment, and industrial equipment
DMAx4ch
*2
83
(8)
CRCcalculation circuit(2 types),Sub-clock circuit
1
ー
○
FS
Ctr.,Bulk,Int.Iso.
ー
9 Endpoints
3.2K
1024
1
ー
○
FS
Ctr.,Bulk,Int.Iso.
ー
4 Endpoints
ー
1
ー
○
FS Hub
Ctr.,Bulk,Int.Iso.
ー
2 Endpoints (Hub) +
4 Endpoints (Function)
ー
64(expanded to
built-in RAM)*5
3.0 to 3.6
DMACx4ch DTCx85ch
−20 to 75
*1
(−40 to 85)
DTCx85ch
E-DMACx1ch
(for Ether net)
16 bit
H8S/2212
64-pin LQFP(10mm□)64-pin QFN(8mm□)
M16C/6C★
100-pin LQFP
(14mm□)
M30245
100-pin LQFP
3.0 to 3.6
38K0
64-pin LQFP
(0.5mm pitch/0.8mm pitch)
3.00 to 5.25
38K2
2.7 to 5.5
−20 to 85
ー
*2
48
(4)
*2
44
(4)
Bus interface
*1.Wide temperature type *2.LED Drive port *3.When the Function is used, the Host cannot be used. *4.Total number of built-in FIFO *5.Maximum number of bytes allowing set to just one Endpoint. Using the double buffer mode doubles transmission capability.
*6.HS: Hi-Speed, FS: Full Speed, LS: Low-Speed *7.Ctr.: Control transfer, Bulk: Bulk transfer, Int.: Interrupt transfer, Iso.: Isochronous transfer
7
SH7216
SH7285/
SH7286
SH7763/
SH7760
SH7720/
SH7721
SH7727/
SH7705
H8SX/
1665/1655
H8SX/1668R/1668M
H8SX/1658R/1658M
H8SX/
1653/1663/
H8S/2472
H8S/2456R
2456/2454
H8S/2212
2215/2218
M16C/6C
With USB Pull-up Control Terminal
DMACx4ch
DTCx85ch
SH7670/
SH7764
I2Cx2ch,SCIx6ch,High-speed10bitA/D,
H8SX/1665★
H8SX/1658R
H8SX/1658M
M66592/
M66591/
M66291
SH7262/
SH7264
HS,FS,
LS(Host only)
DMACx8ch
SH7727
Other Functions
I/O Ports
R8A66580
DVD recorder, Mobile information
terminal,
Set top box, Audio equipment,
DSC, DVC, Printer,
External storage equipment
USB MCU
8bit
ROAD
MAP
M30245
38K0
38K2
USB-IP/
ZENER DIODE
DEVELOPMENT
ENVIRONMENT
EVALUATION
PRODUCTS
EVALUATION
BOARD
Digital Audio, Other PC Peripheral Devices
USB Pull-up Power Supply Output Terminal
Wireless USB Function
Hi-Speed Function
Other PC peripheral devices
ー
Full-Speed Function
OHCI Host
EHCI Host
Renesas Original Host
8
The R8A66580 is the controller suitable for embedded
application, which directly changes the existing wired
Wireless USB Function
ASSP
Hi-Speed
USB2.0
Block diagram
WiMedia MAC
WiMedia MAC standard
1.0-compliant
Self Beaconing Device
Sprit Bus
8-bit split bus I/F
Wireless USB
Transmission rate
53.3/80/106.7/160/200/
320/400/480Mbps
UWB PHY I/F
WiMedia MAC-PHY Interface
standard 1.2-compliant
Power Source for USB Pull-up
D+ Pull-up Power Source
(Supply Control)
USB Host *1
1 port
Encryption
AES-128CCM
support by H/W
PLL Frequency
Multiplier Built-in
USB Function *2
1 port
External PHY Resume
Input Terminal
1 (UWB PHY resume
by an external terminal)
Interrupt Pin
1-pin polarity set,
interrupt source
can be assigned
Speed
HS/FS (USB)
LS (USB Host only)
Clock Input Frequency
12MHz
Vbus Detector
USB cable connection/
disconnection detector
FIFO
4
32K(Total)*(Wireless
USB)
4
2K(MAX)*3 16K(Total)*(USB)
DMA Interface
2ch
(1ch:Used for both Internal
and external)
Supported
application
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
Bus Interface
16-bit separate CPU bus I/F
Built-in Resistor
Endpoint (Pipe)
D+, D- Termination Resistor
(Wireless USB)
D+, D- Pull-down Resistor (In Host Mode) 8 Endpoints
10 Endpoints (USB)
D+ Pull-up Resistor (In Peripheral Mode)
Low-Power Sleep State
S/W Settable
Isochronous Transfer
Supported (USB only)
Part Number
Pin
Package
Package Code
Supply Voltage (V)
I/O Voltage (V)
Operating Temperature (°C)
Current Consumption (mA)
R8A66580BG ★
100
LFBGA
PLBG0100KA-A
3.3
1.6 to 2.0/2.7 to 3.6
−20 to 85
TBD
★: New product
Flat-screen television
Cellular phone
HDD recorder
Portable audio device
Set-top box
DSC/DVC
Home server
Photo frame
Audio compo
Portable navigation system
DVD player
IC recorder
Electronic datebook
PDA
Electronic
PC peripheral
music instrument
equipment
Electronic keyboard
Electronic piano
Synthesizer
Card reader
Printer
Scanner
PC monitor
OA equipment
Industrial
instrument
Modem
IT terminal
IP telephone
POS system
Barcode reader
ATM
Vending machine
FA equipment
Monitoring camera
Camera application
:Optimum model
9
Car accessory
Communication
equipment
Facsimile
Copy machine
Complex machine
Projector
Electronic blackboard
Interactive teleconference system
TV conference system
Car navigation system
Car audio system
USB IP/
ZENER
DIODE
Digital AV
equipment
: Supported model
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
Mobile
device
38K0
38K2
Optimum devices are prepared for various applications.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
*1. One stage of an external HUB can be connected (When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.)
*2.When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
SH7216
USB
SH7265/
SH7205/
SH7724/ M66592/
SELECTION
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
Wireless
USB Function
Wireless
The R8A66580 is a peripheral function controller compliant
with "Wireless USB Specification Rev.1.0". It can perform
the wireless communication by combining with "MAC-PHY
interface Specification Ver.1.2" compliant PHY chip. The
features of the R8A66580 are ultra-low power consumption
and ultra-small package (5.5mm X 5.5mm). It is suitable
for the compact size and battery-driven products such as
DSC and portable player etc.. The R8A66580 succeeds
the design architecture of Renesas's USB controllers to
ensure the compatibility.
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
R8A66580BG
ROAD
MAP
USB product to the wireless USB product.
10
The USB Host can be easily established. The USB memory,
Block diagram
Part Number
R8A66597FP
R8A66597DFP
R8A66597BG
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
PLL Frequency Multiplier
Built-in
DMA Interface
2ch
Interrupt Pin
1-pin polarity set, interrupt
source can be assigned
Clock Input Frequency
12/24/48MHz
USB Function *2
1 port
Vbus Detector
USB cable connection/
disconnection detector
Split Bus
8-bit Split Bus I/F
Built-in Resistor
D+, D-Termination Resistor
D+, D-Pull-down Resistor (In Host Mode)
D+ Pull-up Resistor (In Peripheral Mode)
Power Source
for USB Pull-up
D+ Pull-up Power Source
(Supply Control)
Low-Power Sleep State
S/W Settable
Bus Interface
16-bit CPU Bus I/F,
Separate/Multiplex selectable
FIFO
2K (Max)*3 8.5K(Total)*4
Isochronous Transfer
Supported
Package
Package Code
Supply Voltage (V)
I/O Voltage (V)
Operating Temperature (°C)
Current Consumption (mA)
80
80
81
LQFP
LQFP
LFBGA
PLQP0080LA-A
PLQP0080LA-A
PLBG0081KA-A
3.3
3.3
3.3
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
−20 to 85
−40 to 85*
−20 to 85
HS:70 FS:25
HS:70 FS:25
HS:70 FS:25
*Wide temperature type
*1. One stage of an external HUB can be connected (When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.)
*2.When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
Supported
application
Mobile
device
Part Number
M66592FP
M66592WG
M66592UG
M66591GP
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
with a USB memory and a portable music player.
Host and
Function
Mobile
device
Part Number
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
USB Power Management
Output Function
Configured Condition (M66591)
Suspend Condition (M66591)
FIFO
512K(Max)*1 3.5K (Total) *2
(M66591)
2K (Max)*1 5K (Total) *2
(M66592)
Endpoint (Pipe)
7 Endpoints (M66591)
8 Endpoints (M66592)
Isochronous
Transfer Supported
(M66592 only)
Package
Package Code
Supply Voltage (V)
I/O Voltage (V)
Operating Temperature (°C)
Current Consumption (mA)
64
64
64
80
LQFP
FBGA
VFBGA
LQFP
64P6X-B
64FHX-A
64FHX-C
PLQP0080LA-A
1.5/3.3
1.5/3.3
1.5/3.3
3.3
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
1.7 to 2.0/2.7 to 3.6
−20 to 85
−20 to 85
−20 to 85
−20 to 85
HS: 40 FS: 18
HS: 40 FS: 18
HS: 40 FS: 18
184
The M66596 is a USB controller conforming to USB2.0 specifications
that are suitable for embedding applications. It is possible to select
either a host function or peripheral function by this model's register
settings. The Embedded Host can be easily realized and one-to-one
high-speed transfer with USB peripheral occurs when the USB host
function is selected. The development from the USB peripheral
equipment to the USB host equipment can be easily implemented
thanks to USB peripheral controller the M66592 and pin compatibility.
This product has been developed using Renesas's original USB-IP,
and it can be smoothly integrated into a System LSI.
The industry leading class high-speed USB data communications
are realized. The M66291 supports various Full-Speed
Full-Speed USB2.0 Function
USB product applications and realizes low power consumption.
M66291GP/HP
Full-Speed
USB2.0
USB
ASSP
USB
Function
Block diagram
Supported
application
PLL Frequency Multiplier
Built-in
Speed
HS/FS
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO.
USB host system. It is suitable for the connection
Hi-Speed
USB2.0
USB
ASSP
Low-Power Sleep State
S/W Settable
(M66592)
USB Function
1 port
Pin
The M66596 can establish a simple and compact
M66596FP/WG/UG
Built-in Resistor
D+, D-Termination Resistor
D+ Pull-up Resistor
(M66592)
Power Source for USB Pull-up
D+ Pull-up Power Source
(Supply Control)
Split Bus
8-bit Split Bus I/F
Endpoint (Pipe)
10 Endpoints
Pin
Hi-Speed USB2.0 Host and Function
Vbus Detector
USB cable connection/
disconnection detector
DMA Interface
2ch (M66592)
1ch (M66591)
Speed
HS/FS/LS (Host only)
Bus Interface
16-bit CPU Bus I/F,
Separate/
Multiplex selectable
Interrupt Pin
1-pin polarity set,
interrupt source can be assigned
(M66592 Fix to polarity)
The M66291 is a Full-Speed USB peripheral controller
complying with USB2.0 specifications. It also flexibly supports
a variety of DMA modes thanks to the built-in DMA interface
(2-ch) and features selectable polarity. In addition, the
M66291 comes equipped with 2 interrupt pins that enable the
polarity settings, so various interrupt factors can be allocated
freely. The connection to a CPU with a 5V power supply is
available because the I/O power supply is 2.7 to 5.5V. This
product has been developed using Renesas's original
USB-IP, and it can be smoothly integrated into a System LSI.
Block diagram
Clock Input Frequency
12/24/48MHz
PLL Frequency Multiplier
Built-in
DMA Interface
2ch
Interrupt Pin
1-pin polarity set,
interrupt source
can be assigned
Bus Interface
16-bit CPU Bus I/F,
Separate/
Multiplex selectable
Vbus Detector
USB cable connection/
disconnection detector
Split Bus
8-bit Split Bus I/F
Built-in Resistor
D+, D-Termination Resistor
D+, D-Pull-down Resistor (In Host Mode)
D+ Pull-up Resistor (In Peripheral Mode)
Power Source for USB
Pull-up
D+ Pull-up Power Source
(Supply Control)
Low-Power Sleep State
S/W Settable
USB Host
1 port
Clock Input Frequency
6/12/24/48MHz *3
USB Function *1
1 port
Speed
HS/FS/LS (Host only)
Interrupt Pin
2-pin polarity set,
interrupt source
can be assigned
Pin
Package
Package Code
Supply Voltage (V)
I/O Voltage (V)
Operating Temperature (°C)
Current Consumption (mA)
64
64
64
LQFP
FBGA
VFBGA
64P6X-B
64FHX-A
64FHX-C
1.5/3.3
1.5/3.3
1.5/3.3
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
1.6 to 2.0/2.7 to 3.6
−20 to 85
−20 to 85
−20 to 85
HS:40 FS:18
HS:40 FS:18
HS:40 FS:18
FIFO
1K (Max)*1 3K (Total)*2
Bus Interface
8/16 bit CPU
Endpoint (Pipe)
7 Endpoints
Endpoint (Pipe)
8 Endpoints
Isochronous
Transfer Supported
Speed
FS
DMA Interface
2ch polarity set,
8/16 bit correspondence
FIFO
2K (Max)*2 5K (Total)*3
*1. When the Function is used, the Host cannot be used. *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO.
USB Function
1 port
PLL Frequency Multiplier
Built-in
Supported
application
Mobile
device
Part Number
M66291GP
M66291HP
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
Power Source
for USB Pull-up
D+ Pull-up Power Source
(Supply Control)
Vbus Detector
USB cable connection/
disconnection detector
Isochronous
Transfer Supported
Pin
Package
Package Code
Supply Voltage (V)
I/O Voltage (V)
Operating Temperature (°C)
消費電流
(mA)(mA)
Current
Consumption
48
52
LQFP
HVQFN
PLQP0048KB-A
PVQN0052LA-B
3.3
3.3
2.7 to 3.6/4.5 to 5.5
2.7 to 3.6/4.5 to 5.5
−20 to 85
−20 to 85
TBD
15
15
SH7216
Mobile
device
Clock Input Frequency
12/24/48MHz
USB Host *1
2 port
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
Supported
application
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
USB
Function
Block diagram
M66596FP
M66596WG
M66596UG
11
Hi-Speed
USB2.0
USB
ASSP
H8SX/
1665/
1655
Embedded Host can be easily realized and the function has been
expanded so that the On-the-Go can be realized. In addition, it is
now possible to incorporate a large variety of products thanks to
the development of products that can tolerate a wide temperature
range. This product has been developed using Renesas's original
USB-IP, and it can be smoothly integrated into a System LSI.
M66591GP
The M66591 and M66592 are Hi-Speed USB peripheral
controllers complying with USB2.0 specifications. The
M66592 furnishes low power consumption in an ultra small
5mm square package (M66592UG) that is suitable for
mobile device applications. In addition, the 8-bit split (a
DMA interface independent from the CPU bus) furnishes
high-speed communications without stressing the CPU.
These products has been developed using Renesas's
original USB-IP and each can be smoothly integrated into
a System LSI.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
The R8A66597 is the USB controller that is the upper model of
the M66596. It is possible to select either a host function (up to 2
ports) or 1 port peripheral function by this model's register settings.
The host function enables the connection of an external HUB (up
to one stage *1) and communications for up to 10 devices. The
ROAD
MAP
industry leading class low power consumption is realized.
SH7265/
SH7205/
SH7724/ M66592/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
M66592FP/WG/UG
38K0
38K2
Host and
Function
with more than one USB device at the same time.
USB IP/
ZENER
DIODE
Hi-Speed
USB2.0
USB
ASSP
small package and Bulk application are mounted. The
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
R8A66597FP/DFP/BG
Hi-Speed USB2.0 Function
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
Hi-Speed USB2.0 Host and Function
Functions that cover video / music field in addition to
keyboard, mouse and multimedia device can be communicated
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO.
*3. When I/O voltage=2.7 to 3.6V, clock input is 6/12/24/48MHz. When I/O voltage=4.5 to 5.5V, clock input is 24/48MHz.
12
The SH7724 is suitable for the One-segment supported
SBSC
(DDR I/F)
Supported
application
IrDA
VOU
SCIF
6ch
EtherMAC
10/100base
RWDT
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
CPG
PLL/
DLL
2DG
2D Graphic
Accelerator
KEY
Scan
INTC
CMT
1ch
DMAC TMU
12ch 32bx6ch
MSIOF/SPI
2ch
UBC
2ch
L2-Cache
256kB
I-Cache
32kB
VPU5F
MPEG4/H.264
VC1(WMV)
Processing Unit
LCD
Controller
ATAPI
ILRAM
16kB
MMU
TPU
4ch
HUDI
/AUD
I 2C
1ch
USB2.0 HS
SD/MMC4.2
RTC
I/F
1ch Host & Function
Car accessory
VIO5
5Mpixcel
Camera I/F
Visual & Graphic
Function
USB Host *1
2 port
SH2A-FPU
ROM-DEC
Speed
HS/FS/LS (Host only)
JPU
FSI
SDcard
I/F
Endpoint (Pipe)
10 Endpoints
TS-IF
Isochronous
Transfer Supported
I/O Port
SCIF(8ch)
SRAM
1MB/640KB
RCAN(2ch)
DMAC
(16ch)
VDC3
Video in
Display cnt.
WDT
Pin
Package
Package Code
R8A77240D500BG★★
R8A77240B500BB★★
449
441
BGA
PRBG0449GA-A
PVBG0441KA-B
BGA (POP supported)
64K(L1),
256K(L2)
ROM Type*
16K
L
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
1.2/3.0 to 3.6,1.8
−40 to 85
−20 to 70
Clock
(MHz)
500
★★:Under development
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*3. Total number of built-in FIFO.
The SH7722 and SH7723 are suitable for multimedia
Hi-Speed USB2.0 Host and Function
SH7780 Series
equipment that requires high-end and low power at the
SH7722/SH7723
navigation equipment and portable media player.
same time such as One-segment supported car
Hi-Speed
USB2.0
32
bit
Host and
Function
The SH7722 (SH-MobileR) is a 32-bit RISC microprocessor embedded
with a USB Function conforming to Hi-Speed USB2.0. The operation is
available at up to 333MHz, as well as various multimedia support
functions such as MPEG4・H.264, 2D graphic accelerator, LCD
controller, camera interface and sound I/O. The SH7723 (SH-MobileR2)
is a 32-bit RISC microprocessor embedded with a USB Host/Function
conforming to Hi-Speed USB2.0. The operation is available at up to
400MHz. The SH7723 also has an FPU, the 256KB second cache and
various multimedia support functions. The USB module supports all
transfer types with USB2.0 specifications.
SH7723 block diagram
SH-X2
core
400
FPU
MHz
BSC
(async
memory I/F)
SBSC
(DDR I/F)
FLCTL
(NAND Flash
I/F)
LCD
Controller
Supported
application
VOU
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
I-Cache O-Cache
32kB
32kB
MMU
VPU5F
MPEG4/H.264
VC1
Processing Unit
2DG
2D Graphic
Accelerator
CPG
IrDA PLL/DLL INTC
SCIF
6ch
MSIOF/SPI
2ch
RWDT
UBC
2ch
ADC
1ch
RTC
1ch
TPU
4ch
KEY
Scan
CMT
1ch
DMAC TMU
12ch 32bx3ch
HUDI
/AUD
I 2C
1ch
L2-Cache
256kB
VIO5
5Mpixcel
Camera I/F
Visual &
Graphic
Function
USB Host *1
1 port (SH7723 only)
USB Function *2
1 port
Speed
HS/FS/LS
(SH7723: Host only)
SIU2
Sound
accelerator
/DSP Function
/Equalizer/Filter
FIFO
2K (Max)*3 4K (Total)*4 (SH7722)
2K (Max)*3 16K (Total)*4 (SH7723)
ATAPI I/F
Endpoint (Pipe)
8 Endpoints (SH7722)
10 Endpoints (SH7723)
USB2.0 HS SDcard SDcard
Host & Function
I/F
I/F
TS-IF
Isochronous
Transfer Supported
I/O Port
SH7722(USB-IP equivalent to M66592 is mounted) SH7723( USB-IP equivalent to R8A66597 is mounted)
R8A77220AC266BAV
R8A77220AC266BGV
R8A77230AC400BG★
R8A77230AD400BG★
Memory capacity (Byte)
Cache memory
RAM
Pin
Package
Package Code
449
BGA
PLBG0417KB-A
PRBG0449GA-A
64K
449
BGA
PRBG0449GA-A
64K(L1)
256K(L2)
ROM Type*
Supply Voltage
(Vcc/VccQ)
148K
L
1.15 to 1.3/3.0 to 3.6
1.25 to 1.35/3.0 to 3.6
16K
L
1.15 to 1.3/3.0 to 3.6
Operating
Temperature (°C)
−20 to 70
−40 to 85
−20 to 70
−40 to 85
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
A/D
(10bit)
(x 4ch or x 8ch)
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
USB Function *2
1 port
Speed
HS/FS/LS (Host only)
FLCTL
SDHI
RSPI(2ch)
SIOF
(1ch)
FIFO
2K (Max)*3 8K (Total)*4
SRC(2ch)
Decompress
Unit
Supported
application
USB Host *1
1 port
SSI
(4ch)
PWM timer
(10bit x 16ch)
Endpoint (Pipe)
10 Endpoints
(USB-IP equivalent to R8A66597 is mounted)
Part Number
R5S72620P144FP★★
R5S72621P144FP★★
R5S72622P144FP★★
R5S72623P144FP★★
R5S72620W144FP★★
R5S72621W144FP★★
R5S72622W144FP★★
R5S72623W144FP★★
R5S72624P144FP★★
R5S72625P144FP★★
R5S72626P144FP★★
R5S72627P144FP★★
R5S72624W144FP★★
R5S72625W144FP★★
R5S72626W144FP★★
R5S72627W144FP★★
R5S72640P144FP★★
R5S72641P144FP★★
R5S72642P144FP★★
R5S72643P144FP★★
R5S72640W144FP★★
R5S72641W144FP★★
R5S72642W144FP★★
R5S72643W144FP★★
R5S72644P144FP★★
R5S72645P144FP★★
R5S72646P144FP★★
R5S72647P144FP★★
R5S72644W144FP★★
R5S72645W144FP★★
R5S72646W144FP★★
R5S72647W144FP★★
Pin
Package
Package Code
Memory capacity (Byte)
Cache memory
RAM
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
Clock
(MHz)
ー40 to 85
1088K
ー20 to 85
176
PLQP0176KB-A
ー40 to 85
704K
ー20 to 85
16K
QFP
L
144
1.1 to 1.3/3.0 to 3.6
ー40 to 85
1088K
ー20 to 85
208
ROAD
MAP
Isochronous
Transfer Supported
I/O Ports
(USB-IP equivalent to R8A66597 is mounted)
Memory capacity (Byte)
Cache memory
RAM
Part Number
MTU2
(16bit x 5ch)
CMT
(16bit x 5ch)
BSC
SRAM,NOR
SDRAM,
PCMCIA
FIFO
2K (Max)*2 16K (Total)*3
24bit Audio DSP
Sound Interface
RTC
URAM
64KB
(3ch)
I2C Bus
USB Function
1 port
JPEG Processing Unit
SPU
Cache
4way,16KB
SH7216
BSC
(async memory I/F)
Block diagram
D-Cache
32kB
SH7265/
SH7205/
SH7724/ M66592/
SELECTION
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
bit
Host and
Function
The SH7262/7264 is a 32-bit RISC microprocessor embedded
with USB Host and Function conforming to Hi-Speed USB2.0
specifications. It has FPU built-in high performance CPU core
"SH2A-FPU" and the operation is available at up to a maximum
operation frequency of 144MHz. The compressing and expanding
processing of audio data such as MP3, WMA and AAC, which is
required for audio applications, can be realized in higher speed
with smaller program size thanks to high signal processing
performance and ROM code efficiency. The USB module
supports all transfer types based on the USB2.0 specifications.
PLQP0208KB-A
ー40 to 85
704K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used.
*3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*4. Total number of built-in FIFO.
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH-4A
core
500
FPU
MHz
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
Hi-Speed
USB2.0
32
Block diagram
Part Number
13
SH7262/SH7264
H8SX/
1665/
1655
bit
Host and
Function
dashboard equipment and OA/ industrial instrument.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
Hi-Speed
USB2.0
32
controller. It is suitable for audio equipment, graphic
38K0
38K2
SH7724
The SH7724 (SH-MobileR2R) is a 32-bit RISC microprocessor
with built-in USB Host and Function complying with Hi-Speed
USB2.0 specifications. The SH7724 enables 500MHz
operation that increasing the speed by approximately 1.3× of
that of existing product "SH7723 (SH-MobileR2)", and it also
improves the performance and functions for realizing the
HD-compliant video playback and recording. 1-port USB host
function and 1-port peripheral function can be operated at the
same time by setting the register.
SRAM, Hi-speed USB controller and video display
ー20 to 85
★★:Under development
USB IP/
ZENER
DIODE
and the video recording of HD are also realized.
The SH7262/7264 is embedded with high-capacity
Hi-Speed USB2.0 Host and Function
SH7260 Series
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
PND and car navigation equipment. The playback
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Hi-Speed USB2.0 Host and Function
SH7780 Series
Clock
(MHz)
266
333
400
★:New product
14
USB Host *1
2 port
SH2A-FPU
(200MHz)
I
Cache
8KB
D
Cache
8KB
USB Function *2
1 port
SH2A-FPU
U Memory (32 KB)
EDMAC
DMAC
(2ch)
INTC
SCIF
(3ch)
SSI(2ch)
DMAC
(8ch)
UBC
CAN
(2ch)
URAM
64KB
URAM
32KB
DMAC
Speed
HS/FS/LS (Host only)
USB Host *1
1 port
USB Function *2
1 port
Speed
HS/FS/LS (Host only)
H-UDI
FIFO
2K (Max)*3 10K (Total)*4
SSI
6ch
INTC
Ether MAC
Cache
(16KB)
FIFO
2K (Max)*3 8K (Total)*4
HIF
FLCTL
2KB
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
WDT
A/D
(10bit×8ch)
SCIF
(6ch)
SSU
(2ch)
2DG
V-in
V-out
(
2KB
Endpoint (Pipe)
10 Endpoints
ATAPI
)
Isochronous
Transfer Supported
Supported
application
BSC
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
SD I/F
CMT(2ch)
Endpoint (Pipe)
10 Endpoints
Car accessory
Isochronous
Transfer Supported
I/O Ports
(USB-IP equivalent to R8A66597 is mounted)
(USB-IP equivalent to R8A66597 is mounted)
Part Number
R5S72650P200BG★
R5S72651P200BG★
R5S72652P200BG★
R5S72653P200BG★
R5S72050W200BG★
Pin
Package
272
BGA
Package Code
PRBG0272GA-A
Memory capacity (Byte)
Cache memory
RAM
16K
112K
ROM Type*
L
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
−40 to 85
1.1 to 1.3/3.0 to 3.6
Clock
(MHz)
200
−20 to 85
* F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
★New product
The SH7263 is suitable for the digital audio
Hi-Speed USB2.0 Host and Function
SH7260/SH7200 Series
equipment such as car audio and home audio,
and the SH7203 is suitable for the industrial
instrument such as sequencer and robot.
SH7263/SH7203
Hi-Speed
USB2.0
32
bit
Host and
Function
The SH7263/SH7203 is a 32-bit RISC microprocessor
embedded with USB Host and Function conforming to
Hi-Speed USB2.0 specifications. In addition to the 200MHz
"SH2A-FPU" core, 16KB cache memory and 80KB internal
RAM, the device features abundant peripheral functions
such as color LCDC, DMAC, audio interface, CDROM
decoder and sampling rate converter. The USB module
complies with all transfer types of USB2.0 specifications
and is capable of setting the 8KB FIFO up to 8 Endpoints.
Part Number
R5S76700B200BG
R5S76710B200BG
R5S76720B200BG
R5S76730B200BG
R5S76700D133BG
R5S76710D133BG
R5S76720D133BG
R5S76730D133BG
Memory capacity (Byte)
Cache memory
RAM
Pin
Package
Package Code
256
BGA
P-LFBGA1717-256
16K
256
BGA
P-LFBGA1717-256
16K
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
Clock
(MHz)
32K
L
1.1 to 1.3/3.1 to 3.5
−20 to 70
200
32K
L
1.1 to 1.3/3.1 to 3.5
−40 to 85
200
* F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
The SH7764 is suitable for the products for digital
audio and multimedia applications such as home
audio equipment and car navigation equipment.
Hi-Speed USB2.0 Host and Function
SH7780 Series
SH7764
Hi-Speed
USB2.0
32
bit
Host and
Function
Block diagram
RTC
SH2A-FPU
Cache
(4Way,16KB)
I2C
bus
(4ch)
ROM-DEC
RAM
(64KB+16KB)
MTU2
(16bit×5ch)
SSU
(2ch)
BSC
ROM,SRAM,
SDRAM I/F
WDT
CMT
(16bit×2ch)
RCAN(2ch)
A/D
(10bit×8ch)
Supported
application
FLCTL
D/A
(8bit×2ch)
Mobile
device
R5S72630P200FP
R5S72631P200FP
R5S72632P200FP
R5S72633P200FP
R5S72030P200FP
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
Car accessory
The SH7764 is a high performance microprocessor embedded
with USB Host and Function conforming to Hi-Speed USB2.0
specifications, and an FPU with "SH-4A" core. The operation
is available at up to 324MHz. The CPU supports 583MIPS at
maximum, and the FPU supports single precision and
double-precision calculation, up to 2.3GFLOPS.
The SH7764 allow high-speed processing of audio codec
(WMA/MP3/AAC) and image data (2D/3D), and also, with
hardware support for vector operation and sine/cosine
operation, it allows high-speed 3D graphics processing. The
USB module supports all transfer types based on the USB2.0
specifications with a 5KB FIFO that can be set at a maximum
of 10 Endpoints.
Block diagram
USB Function *1
1 port
SH-4A
324MHz
Speed
HS/FS
BSC
ROM, SRAM,
SDRAM
MMU
I-Cache
32KB
1ch
Endpoint (Pipe)
8 Endpoints
Isochronous
Transfer Supported
(USB-IP equivalent to M66596 is mounted)
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
Clock
(MHz)
Pin
Package
Package Code
240
QFP
QFP3232-240Cu
16K
80K
L
1.1 to 1.3/3.0 to 3.6
−40 to 85
200
240
QFP
QFP3232-240Cu
16K
80K
L
1.1 to 1.36/3.0 to 3.6
−20 to 85
200
RAM
16KB
FPU
Supported
application
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
GPIO
USB Host *1
1 port
INTC
DMAC
6ch
I2C
I/O Ports
Data
Cache
32KB
USB Function *2
1 port
FIFO
2K (Max)*2 8K (Total)*3
SSI
(4ch)
LCDC
DMAC
(8ch)
USB Host
1 port
SCIF
(4ch)
ROAD
MAP
I2C
CPG
H8SX/
1665/
1655
Supported
application
RTC
SH7216
SH2A-FPU
(200MHz)
D
Cache
8KB
SH7265/
SH7205/
SH7724/ M66592/
SELECTION
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
bit
Host and
Function
TMU
32bit
6ch
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
Hi-Speed
USB2.0
32
The SH7670 is a 32-bit RISC microprocessor embedded with
USB Host and Function conforming to Hi-Speed USB2.0
specifications. It is embedded with 32-bit CPU core
"SH2A-FPU" and realizes the high processing function of
480MIPS when the maximum operation frequency is 200MHz.
In addition, the Ethernet controller, the host of USB2.0 and
the Function are integrated in one chip for the first time in
Renesas, so the LAN controller that has been required as an
external part and LSI dedicated to USB2.0 can be reduced.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
SH7670
Block diagram
I
Cache
8KB
BSC
ROM, SRAM,
SDRAM
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
sequencer and monitoring camera.
Block diagram
Part Number
15
audio compo and the industrial instrument such as
38K0
38K2
bit
Host and
Function
such as DVD recorder, flat-screen television and
USB IP/
ZENER
DIODE
ROAD
MAP
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
H8SX/
1665/
1655
Hi-Speed
USB2.0
32
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
SH7265/SH7205
The SH7265/7205 is a 32-bit RISC microprocessor
embedded with 2 ports for a USB Host (2 ports) and
Function conforming to Hi-Speed USB2.0 specifications.
The SH7625/7205 is a multi-core microcontroller product
with two built-in "SH2A-FPUs", and the operation is
available at up to a maximum operation frequency of
200MHz. Since each core individually has FPU, the single
SH7625/7205 product can operate data processing of
industrial instruments or musical devices.
In addition, it has various interfaces and peripheral
functions. The USB module supports all transfer types
based on the USB2.0 specifications with a 10KB FIFO that
can be set at a maximum of 10 Endpoints.
The SH7670 is suitable for the digital audio equipment
Hi-Speed USB2.0 Host and Function
SH-Ether Series
SRC
2ch
Speed
HS/FS/LS (Host only)
WDT
SCIF
3ch
SSI
6ch
IDE
controller
1ch
Ether
MAC
1ch
SDHC
I/O
2D
Graphic
H-UDI
NAND
Flash
I/F
FIFO
2K (Max)*3 5K (Total)*4
Endpoint (Pipe)
10 Endpoints
VDC2
Digital
RGB
LCDC
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
The SH7265 is suitable for the dissemination model of car
audio, car navigation system and the products for
multimedia equipment, and the SH7205 is suitable for the
products of consumer equipment and industrial instrument.
Hi-Speed USB2.0 Host and Function
SH7260 Series
Isochronous
Transfer Supported
(USB-IP equivalent to R8A66597 is mounted)
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. When the Function is used, the Host cannot be used. *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO.
Part Number
R5S77640N300BG★
R5S77640P300BG★
Pin
Package
Package Code
404
BGA
PRBG0404GA-A
Memory capacity (Byte)
Cache memory
RAM
32KB+32KB
16K
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
L
1.15 to 1.35/3.0 to 3.6
−40 to 85
−20 to 85
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
Clock
(MHz)
324
★:New product
16
bit
time of interrupt, and significantly improves real time performance.
Because the USB Function is based on USB2.0 and the USB
standard commands and USB state are processed nearly fully
automatically with hardware, the system development is simple.
Block diagram
SCI
(4ch)
SCIF
(1ch)
SH2A-FPU
BSC
SRAM,NOR
SDRAM
MTU2
(16bit x 5ch)
CMT
(16bit x 2ch)
RAM
128KB/96KB/
64KB
EtherMAC
(Option 1ch)
OA equipment Communication
equipment
Industrial
instrument
Car accessory
DTC
Flash
UBC
FIFO
128 (Max)*1 288 (Total)*2
H-UDI/AUD
SCI 4ch
WDT
SCIF 1ch
I2C
SSU
CAN*
DMAC
(8ch)
12bit A/D
Supported
application
FIFO
128 (Max)*1 288 (Total)*2
Endpoint (Pipe)
4 Endpoints
D/A*
Isochronous Transfer
Not Supported
Mobile
device
I/O Ports
Speed
FS
CMT
Endpoint (Pipe)
4 Endpoints
Isochronous Transfer
Not Supported
USB Function
1 port
MTU2S
Speed
FS
RCAN-ET
(1ch)
RSPI
(1ch)
Electronic
PC peripheral
music instrument equipment
SH-2A
BSC
12bitA/D
(4ch x 2Unit)
MTU2
RAM
MTU2S
(16bit x 3ch)
DTC
Digital AV
equipment
USB Function
1 port
I2C(1ch)
DMAC
(8ch)
Mobile
device
memory (SH7286: up to 1MB, SH7285: up to 768KB). A newly
embedded register bank allows high-speed register spilling at the
Block diagram
Supported
application
high-speed processing. It also has a built-in large-capacity flash
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Car accessory
I/O Ports
* SH7286 only
Package
Package Code
LQFP
(20mm□)
PLQP0176LB-A
LQFP
(24mm□)
PLQP0176KB-A
BGA
(13mm□)
PLBG0176GA-A
LQFP
(20mm□)
PLQP0176LB-A
LQFP
(24mm□)
PLQP0176KB-A
BGA
(13mm□)
PLBG0176GA-A
176
LQFP
(20mm□)
PLQP0176LB-A
LQFP
(24mm□)
PLQP0176KB-A
BGA
(13mm□)
PLBG0176GA-A
LQFP
(20mm□)
PLQP0176LB-A
LQFP
(24mm□)
PLQP0176KB-A
BGA
(13mm□)
PLBG0176GA-A
Memory capacity (Byte)
ROM
RAM
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
512K
64K
768K
96K
1M
128K
* F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
ROM Type*
Supply Voltage
(Vcc)
Operating
Temperature (°C)
Clock
(MHz)
Part Number
R5F72855N100FP R5F72855D100FP R5F72856N100FP R5F72856D100FP R5F72865N100FP R5F72865D100FP R5F72865N100FA R5F72865D100FA R5F72866N100FP R5F72866D100FP R5F72866N100FA R5F72866D100FA R5F72867N100FP R5F72867D100FP R5F72867N100FA R5F72867D100FA F
3.0 to 3.6
ー40 to 85
200
Pin
144
Package
LQFP
Package Code
Memory capacity (Byte)
ROM
RAM
512K
24K
768K
32K
512K
24K
ROM Type*
Supply Voltage
(Vcc)
Operating
Temperature (°C)
Clock
(MHz)
F
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
3.0 to 3.6/4.5 to 5.5
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
−20 to 85
−40 to 85
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
PLQP0144KA-A
PLQP0176KB-A
PLQP0176LB-A
PLQP0176KB-A
176
LQFP
768K
32K
1M
32K
PLQP0176LB-A
PLQP0176KB-A
PLQP0176LB-A
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
38K0
38K2
R5F72145BDFA★★
R5F72146BDFA★★
R5F72147BDFA★★
R5F72145BDFP★★
R5F72146BDFP★★
R5F72147BDFP★★
R5F72145BDBG★★
R5F72146BDBG★★
R5F72147BDBG★★
R5F72145ADFA★★
R5F72146ADFA★★
R5F72147ADFA★★
R5F72145ADFP★★
R5F72146ADFP★★
R5F72147ADFP★★
R5F72145ADBG★★
R5F72146ADBG★★
R5F72147ADBG★★
R5F72165BDFA★★
R5F72166BDFA★★
R5F72167BDFA★★
R5F72165BDFP★★
R5F72166BDFP★★
R5F72167BDFP★★
R5F72165BDBG★★
R5F72166BDBG★★
R5F72167BDBG★★
R5F72165ADFA★★
R5F72166ADFA★★
R5F72167ADFA★★
R5F72165ADFP★★
R5F72166ADFP★★
R5F72167ADFP★★
R5F72165ADBG★★
R5F72166ADBG★★
R5F72167ADBG★★
Pin
USB IP/
ZENER
DIODE
Part Number
SH7216
32
USB
Function
ROAD
MAP
realizes the operation of a maximum of 100MHz and 200MIPS
Full-Speed
USB2.0
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
bit
The SH7285/7286 is embedded with 32-bit CPU core "SH-2A"
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
32
USB
Function
SH7285/SH7286
H8SX/
1665/
1655
Full-Speed
USB2.0
With the SH7216 series, 32-bit CPU core "SH-2A" is
embedded. The increase of consumption current due to
speeding up is controlled by incorporating the power
supply voltage reduction circuit and reducing the
consumption current and the single supply operation at
3.3V is realized for high-speed operation at 200MHz. The
peripheral function is embedded with PWM timer and
12-bit A/D converter, and Ethernet, USB and CAN are
incorporated as a communication module.
★★:Under development
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
ROAD
MAP
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
H8SX/
1665/
1655
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
38K0
38K2
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
17
SH7216
The SH7285/7286 is embedded with abundant
peripheral functions such as serial interface,
multifunctional timer unit and 12-bit A/D converter.
It is suitable for AC servo, general-purpose inverter
and robot etc.
Full-Speed USB2.0 Function
SH7280 Series
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
The speed is increased from operation of our company's
existing product SH7211 series at 160MHz to 200MHz to
realize the improvement of performance by 1.25 times.
In addition, 1MB large capacity flash memory and
high-capacity RAM are incorporated.
Full-Speed USB2.0 Function
SH7216 Series
18
various
terminal thanks to abundant peripheral functions
such as color LCD controller, USB, and the low
Block diagram
Block diagram
RAM
(16KB)
SIOF
(3ch)
SH-4A
MPEG-TS I/F
DMAC(6ch)
Gbit
EtherMAC
(10/100/
1000Mbps)
2KB
LBSC
ROM,SRAM,
8KB
Burst ROM,
PCMCIA
E-DMAC
(4ch)
BSC
DDR-SDRAM
TSU
(Bridge)
Gbit
EtherMAC
(10/100/
1000Mbps)
8KB
SECURITY
Accelerator
Mobile
device
Part Number
R5S77630AY266BGV
R5S77631AY266BGV
R5S77632AY266BGV
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
449
449
449
BGA
BGA
BGA
PRBG0449GA-A
PRBG0449GA-A
PRBG0449GA-A
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
64K
16K
64K
16K
64K
16K
Car accessory
H-UDI
Speed
FS/LS (Host only)
Isochronous
Transfer Supported
I/O Ports
Operating
Temperature (°C)
Clock
(MHz)
L
L
L
1.15 to 1.35/3.0 to 3.6/2.3 to 2.7
1.15 to 1.35/3.0 to 3.6/2.3 to 2.7
1.15 to 1.35/3.0 to 3.6/2.3 to 2.7
−20 to 75
−20 to 75
−20 to 75
266
266
266
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
The SH7760 is suitable for the electronic
equipment such as simple navigation system,
POS terminal mounted on the color liquid crystal
and audio equipment.
Full-Speed
USB2.0
32
bit
OHCI 1.0
Host
The SH7760 is a 32-bit RISC microprocessor embedded
with USB Host with Low-Speed and Full- Speed OHCI1.0
specifications. In addition to the "SH-4" core with the highly
efficient floating point arithmetic unit, 16KB instruction cache
memory and 32KB data cache memory, the device features
abundant peripheral functions such as 65536-color LCDC,
DMAC, UART with FIFO, audio interface, 32-bit automatic
reloading timer, WDT. An external bus interface can control
FLASH, SRAM, byte control SRAM and SDRAM.
Block diagram
FPU
SH-4
HCAN2(2ch)
MMU
USB Host
1 port
SCIF
(3ch)
Instruction
Cache
(2way,16KB)
UBC
HSPI/SIM/
MMCIF
Speed
FS/LS
H-UDI
BSC
ROM,SRAM,
Burst ROM
SDRAM
PCMCIA I/F
Operand
Cache
(2way,32KB)
HAC/SSI
I2C:2ch
CMT(4ch)
INTC
MFI
2KB
Supported
application
LCDC
640 x 480
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Part Number
Pin
Package
Package Code
HD6417760BL200ADV
HD6417760BL200AV
256
256
BGA
BGA
PLBG0256GB-A
PLBG0256GB-A
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
48K
ー
48K
ー
Car accessory
ROM Type*
L
L
FIFO
Host-shared Memory:
Dedicated RAM 8K
DMAC
(8ch)
CPG/WDT
TMU(3ch)
A/D
(10bit x 4ch)
Endpoint (Pipe)
127 Endpoints
Isochronous
Transfer Supported
I/O Ports
Supply Voltage
(Vdd/Vddq)
1.4 to 1.6/3.0 to 3.6
1.4 to 1.6/3.0 to 3.6
Operating
Temperature (°C)
Clock
(MHz)
−40 to 85
−20 to 75
200
200
SCIF0/IrDA
SCIF1
Cache
(4Way,32KB)
SSL
Accelerator
SIM
MMCIF
Endpoint (Pipe)
127 Endpoints (Host),
6 Endpoints (Function)
Supply Voltage
(Vcc/VccQ)
SH7760
BSC
ROM,SRAM,
Burst ROM,
SDRAM I/F
FIFO
544 (Double buffer),
Host-shared Memory:
DDR-SDRAM Space
ROM Type*
Full-Speed USB(OHCl1.0 Host )
SH7750 Series
UBC
6KB
2KB
MMU
X/YRAM
(8KB×2)
SIOF
(2ch)
USB Function
1 port
LCDC
H-UDI
Supported
application
SH3-DSP
PCIC
Cache
(4Way,64KB)
UBC
USB Host
1 port
DMAC
(6ch)
PCC
Supported
application
Mobile
device
Part Number
HD6417720BP133CV
HD6417720BL133CV
HD6417320BP133CV
HD6417320BL133CV
R8A77210C133BGV
R8A77210C133BAV
R8A77211C133BGV
R8A77211C133BAV
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
Car accessory
RTC
USB Host
1 port
USB Function
1 port
I2C busI/F
(Multi-master)
CMT
(32bit×5ch)
TPU
(16bit×4ch)
TMU
(32bit×3ch)
Color
LCDC
INTC
A/D
(10bit×4ch)
AFEIF
CPG/PLL
D/A
(8bit×2ch)
Speed
FS/LS (Host only)
FIFO
544 (Double buffer),
Host-shared Memory:
SDRAM Space of Area 3
Endpoint (Pipe)
127 Endpoints (Host),
6 Endpoints (Function)
Isochronous
Transfer Supported
I/O Ports
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
Clock
(MHz)
16K
L
1.4 to 1.6/3.0 to 3.6
−20 to 75
133
32K
16K
L
1.4 to 1.6/3.0 to 3.6
−20 to 75
133
PLBG0256GA-A
32K
16K
L
1.4 to 1.6/3.0 to 3.6
−20 to 75
133
PLBG0256GA-A
32K
16K
L
1.4 to 1.6/3.0 to 3.6
−20 to 75
133
Pin
Package
Package Code
256
CSP
PLBG0256GA-A
32K
256
CSP
PLBG0256GA-A
256
CSP
256
CSP
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
SH7216
Host and
Function
The SH7720/SH7721 adopts "SH3-DSP" core and is
embedded with abundant peripheral functions such as
color LCD controller, SSL security accelerator (SH7720
only), USB Host / Function (full speed) and various card
interfaces. These functions can realize the high-cost
performance system and it can be applied to the mobile
terminal by utilizing the low power consumption mode.
ROAD
MAP
power consumption.
Full-Speed
USB2.0
bit
OA
equipment, industrial instrument and mobile
SH7720/SH7721
32
for
SH7265/
SH7205/
SH7724/ M66592/
SELECTION
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
bit
Host and
Function
suitable
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
Full-Speed
USB2.0
32
The SH7763 adopts "SH-4A" core and is embedded with
various peripheral functions such as gigabit Ethernet
controller, PCI bus controller, color LCD controller, security
accelerator (can be selected with lineup), USB
Host/Function (full speed). The SH7763 can support
various systems and realizes the superior cost
performance by selecting these functions as occasion
demands.
is
H8SX/
1665/
1655
SH7763
Full-Speed USB2.0 Function and OHCI1.0 Host
SH7700 Series
SH7720/SH7721
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
OA and industrial instruments widely.
The
38K0
38K2
with
USB IP/
ZENER
DIODE
embedded
controller. It can support the network equipment,
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
is
peripheral functions such as gigabit Ethernet
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Full-Speed USB2.0 Function and OHCI1.0 Host
SH7700 Series
SH7763
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
The
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
19
20
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
instruments.
Full-Speed
USB2.0
32
bit
Host and
Function
The SH7727 adopts "SH3-DSP" core and is embedded
with peripheral functions such as color LCD controller,
USB Host/Function (full speed). It is suitable for OA
equipment and industrial instruments. The operation
frequency can be selected from 160MHz and 100MHz, and
the package type can be selected from HQFP and CSP.
H8SX/1665/1655 Group
Full-Speed
USB2.0
32
bit
USB
Function
Block diagram
H8SX/1665 Group block diagram
MMU
SH3-DSP
UBC
H-UDI
X/Y RAM
(8KB x 2)
Cache
(4way,16KB)
BSC
ROM,SRAM,
Burst ROM
SDRAM
PCMCIA I/F
DMAC
(4ch)
TMU
(32bit x 3ch)
CMT
(16bit x 1ch)
Supported
application
Mobile
device
Part Number
HD6417727F160CV
HD6417727F100CV
HD6417727BP160CV
HD6417727BP100CV
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
240
HQFP
PRQP0240KC-B
240
CSP
PLBG0240JA-A
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
16K
16K
16K
16K
16K
16K
16K
16K
CPG/WDT
AF EIF
RTC
Color LCDC
DMAC
(10bit x 6ch)
Car accessory
INTC
SIOF(1ch)
Audio Codec
D/A
(8bit x 2ch)
I/O Ports
Operating
Temperature (°C)
Clock
(MHz)
L
L
L
L
1.75 to 2.05/3.0 to 3.6
1.6 to 2.05/2.6 to 3.6
1.75 to 2.05/3.0 to 3.6
1.6 to 2.05/2.6 to 3.6
−20 to 75
−20 to 75
−20 to 75
−20 to 75
160
100
160
100
The SH7705 is suitable for the mobile terminal
that requires high-speed processing and low
power consumption at the same time thanks to
built-in strong power management function.
Full-Speed
USB2.0
bit
USB
Function
The SH7705 is embedded with abundant peripheral
functions such as DMAC, serial interface, IrDA1.0, RTC and
WDT in addition to high-end "SH-3" core and large-capacity
cache memory of 32KB. The external bus interface can be
directly connected to Flash, ROM, SRAM, byte-select
SRAM, as well as 512Mbit large-capacity SDRAM. For the
USB module, because the USB standard commands and
USB state are processed nearly fully automatically with
hardware, the system development is simple. With the bulk
Endpoint engineered in a double-buffer mode, the
high-speed transmission becomes a reality.
Block diagram
MMU
SCIFO/IrDA
USB Function
1 port
SH-3
USB Function
1 port
PLL
TMR (8-bit timer):
8ch
Speed
FS
WDT
DTC
EXDMAC:4ch
ADC10bit:4ch
Endpoint (Pipe)
127 Endpoints (Host),
6 Endpoints (Function)
Isochronous
Transfer Supported
(Host only)
RAM
BSC
SDRAM I/F added
DMAC:4ch
FIFO
288 (Double buffer),
Host-shared Memory:
SDRAM Space
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
32
PPG 16bit
Speed
FS/LS (Host only)
SCIF
(1ch)
ROM
FLASH
TPU (16-bit timer) 6ch
SCI
(1ch)
Supply Voltage
(V)
SH7705
TPU (16-bit timer) 6ch
PPG 16bit
ROM Type*
Full-Speed USB2.0 Function
SH7700 Series
H8SX-CPU
@50MHz
USB Host
1 port
USB Function
1 port
INTC
PCC
The H8SX/1665/1655 Group mounts high-speed "H8SX CPU" core
with a maximum operation frequency of 50MHz and incorporates
512KB/384KB large-capacity flash memory and 40KB RAM. This
H8SX/1668/1658 product group offers pin function upward
compatibility and peripheral functions such as high-speed 10bit-A/D
and 10bitD/A, are strengthened. For the USB module, because the
USB standard commands and USB state are processed nearly fully
automatically with hardware, the system development is simple.
Three types of transfer modes (Control, Bulk and Interrupt) are
supported and with a bulk Endpoint engineered with a double buffer
composition, the high-speed data transmission becomes a reality.
Supported
application
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Part Number
Pin
Package
Package Code
R5F61665* 50FPV★
R5F61662* 50FPV★
R5F61665* 50LPV★
R5F61662* 50LPV★
R5F61655* 50FPV★
R5F61652* 50FPV★
144
144
145
145
120
120
LQFP
LQFP
LGA
LGA
LQFP
LQFP
PLQP0144RA-A
PLQP0144RA-A
PTLG0145JB-A
PTLG0145JB-A
PLQP0120LA-A
PLQP0120LA-A
Industrial
instrument
Memory capacity (Byte)
RAM
ROM
40K
512K
40K
384K
40K
512K
40K
384K
40K
512K
40K
384K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
Car accessory
FIFO
64 (Max)*1 288 (Total)*2
DAC
10bit:2ch
ADC10bit:4ch
I/O Port
SCI:6ch
I2C:2ch
H-UDI
UBC
JTAG I/F
32KHz
Sub-clock
Endpoint (Pipe)
4 Endpoints
ROAD
MAP
SH7727
SH7216
It is suitable for OA equipment and industrial
Full-Speed USB2.0 Function
H8SX Family
SH7265/
SH7205/
SH7724/ M66592/
SELECTION
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
LCD controller and USB.
Isochronous Transfer
Not Supported
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
F
F
F
F
F
F
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
−20 to 75
(−40 to 85)
−20 to 75
(−40 to 85)
−20 to 75
(−40 to 85)
−20 to 75
(−40 to 85)
−20 to 75
(−40 to 85)
−20 to 75
(−40 to 85)
50
50
50
50
50
50
*: Clarifying quality grade ★:New product
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
functions such as high-end SH3-DSP core, color
H8SX/
1665/
1655
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Full-Speed USB2.0 Function and OHCI1.0 Host
SH7700 Series
The H8SX/1665/1655 Group offers the optimum
solution to consumer, industrial and OA equipment.
It can be also applied to POS terminal and IC card
transaction terminal etc. in a combination with
Secure IC.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
The SH7727 is embedded with peripheral
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
Speed
FS
H-UDI
BSC
ROM,SRAM,
Burst ROM
SDRAM I/F
TPU
(16bit x 4ch)
RTC
CMT
(16bit x 1ch)
Supported
application
INTC
Mobile
device
Part Number
HD6417705F133B
HD6417705F100B
HD6417705BP133B
HD6417705BP100B
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
208
LQFP
PLQP0208KA-A
208
CSP
TTBG0208JA-A
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
32K
32K
32K
32K
ー
ー
ー
ー
Car accessory
FIFO
64 (Max)*1 288 (Total)*2
DMAC
(4ch)
Endpoint (Pipe)
4 Endpoints
A/D
(10bit x 4ch)
CPG/WDT
Isochronous Transfer
Not Supported
I/O Ports
ROM Type*
Supply Voltage
(Vcc/VccQ)
Operating
Temperature (°C)
Clock
(MHz)
L
L
L
L
1.4 to 1.6/3.0 to 3.6
1.4 to 1.6/3.0 to 3.6
1.4 to 1.6/3.0 to 3.6
1.4 to 1.6/3.0 to 3.6
−20 to 75
−20 to 75
−20 to 75
−20 to 75
133
100
133
100
38K0
38K2
TMU
(32bit x 3ch)
USB IP/
ZENER
DIODE
USB IP/
ZENER
DIODE
UBC
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
38K0
38K2
SCIF2
Cache
(4way,32KB)
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO.
21
22
bit
USB
Function
H8SX/1665 Group block diagram
BSC
SDRAM I/F added
ROM
FLASH
TMR (8-bit timer):
8ch
BSC
SDRAM I/F added
INTC
TPU (16-bit timer)
6ch
Speed
FS
PPG 16bit
WDT
DTC
EXDMAC:4ch
ADC10bit:4ch
ADC10bit:4ch
Supported
application
Mobile
device
Part Number
R5F61668R*50FPV R5F61668M*50FPV R5F61664R*50FPV R5F61664M*50FPV R5F61663R*50FPV R5F61663M*50FPV R5F61668R*50BGV R5F61668M*50BGV R5F61664R*50BGV R5F61664M*50BGV R5F61663R*50BGV R5F61663M*50BGV R5F61658R*50FPV R5F61658M*50FPV R5F61654R*50FPV R5F61654M*50FPV R5F61653R*50FPV R5F61653M*50FPV
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Memory capacity (Byte)
RAM
ROM
Pin
Package
Package Code
144
LQFP
PLQP0144KA-A
1M
144
LQFP
PLQP0144KA-A
512K
Car accessory
SCI:6ch
I2C:2ch
H-UDI
UBC
JTAG I/F
32KHz
Sub-clock
Operating
Temperature (°C)
Isochronous Transfer
Not Supported
SCI:6ch
Supported
application
Mobile
device
Clock
(MHz)
ROM Type*
Supply Voltage
(V)
56K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
LQFP
PLQP0144KA-A
384K
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
176
BGA
PLBG0176GA-A
1M
56K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
176
BGA
PLBG0176GA-A
512K
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
176
BGA
PLBG0176GA-A
384K
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
120
LQFP
PLQP0120LA-A
1M
56K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
120
LQFP
PLQP0120LA-A
512K
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
120
LQFP
PLQP0120LA-A
384K
40K
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
*: Clarifying quality grade
Part Number
R5F61653*50FTV
R5F61654*50FTV
R5F61664*50FPV
R5F61663*50FPV
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Industrial
instrument
Memory capacity (Byte)
Cache memory
RAM
Pin
Package
Package Code
120
LQFP
PTQP0120LA-A
144
LQFP
PLQP0144KA-A
384K
512K
384K
512K
40K
40K
40K
40K
Isochronous Transfer
Not Supported
Car accessory
H-UDI
32KHz
Sub-clock
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
F
3.0 to 3.6
−20 to 75(−40 to 85)
50
F
3.0 to 3.6
−20 to 75(−40 to 85)
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO.
50
*: Clarifying quality grade
The H8S/2472 Group is a single chip MCU with built-in
Full-Speed USB2.0 Function
H8S Family
Flash/RAM, which realizes Ether communications.
H8S/2472 Group
The H8S/2472 Group is embedded with high-speed CPU
with 34MHz (at four times greater than 8.5MHz) operation,
512KB large-capacity flash memory and 40KB RAM. The
system development is simple and allows the USB module to
process USB standard commands and virtually automatic
USB state using the hardware. Three types of transfer modes
(Control, Bulk and Interrupt) are supported and with a bulk
Endpoint engineered with a double buffer composition, the
high-speed data transmission becomes a reality. The on-chip
emulator E10A-USB conforming to JTAGI/F is also prepared
to provide the development with a cheaper development tool.
It can be applied as a gateway of Ethernet and USB.
Full-Speed
USB2.0
16
bit
USB
Function
Block diagram
Clock
Oscillator
H8S-CPU
BSC
Multiplier
ROM
RAM
USB Function
1 port
INTC
TMR (16-bit timer): 12ch
Speed
FS
TMR (8-bit timer): 2ch
DTC
14-bit PWM Timer: 4ch
FIFO
64 (Max)*1 288 (Total)*2
SCI:2ch
WDT:2ch
SCI with FIFO: 1ch
Synchronous Serial
Communication Unit: 1ch
A/D
10bit:8ch
Supported
application
Boundary scan
Mobile
device
Part Number
R4F2472VBR*V
ROAD
MAP
I2C:2ch
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
Endpoint (Pipe)
4 Endpoints
I/O Port
CRC calculation circuit
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
176
BGA
PLBG0176GA-A
Industrial
instrument
Memory capacity (Byte)
ROM
RAM
512K
40K
Car accessory
ROM Type*
F
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO.
23
Speed
FS
FIFO
64 (Max)*1 288 (Total)*2
DAC
8bit:2ch
ADC
10bit:8ch
Endpoint (Pipe)
4 Endpoints
USB Function
1 port
DTC
DMAC:4ch
144
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
WDT
FIFO
64 (Max)*1 288 (Total)*2
DAC
10bit:2ch
I/O Port
PLL
TMR (8-bit timer):
8ch
PPG
DMAC:4ch
Clock
Oscillator
RAM
PLL
TPU (16-bit timer) 6ch
PPG 16bit
H8SX-CPU
@50MHz
USB Function
1 port
SH7216
TPU (16-bit timer) 6ch
Block diagram
RAM
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
INTC
ROM
FLASH
H8SX/
1665/
1655
H8SX-CPU
@50MHz
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
Full-Speed
USB2.0
32
The H8SX/1653/1663 Group mounts a high-speed "H8SX CPU"
core with 50MHz maximum operation frequencies and incorporates
512K/384KB large-capacity flash memory and 40KB RAM. This
H8SX/1653/1663 product group offers abundant peripheral functions
such as data transfer function, SCI (Smart Card I/F, supporting
High-Speed SCI), timer, A/D, D/A. The system development is
simple and allows the USB module to process USB standard
commands and virtually automatic USB state using the hardware.
Three types of transfer modes (Control, Bulk and Interrupt) are
supported and with a bulk Endpoint engineered with a double buffer
composition, the high-speed data transmission becomes a reality.
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
bit
USB
Function
H8SX/1653/1663 Group
38K0
38K2
Full-Speed
USB2.0
32
The H8SX/1668R/1668M Group and the H8SX/1658R/1658M Group
mount high-speed "H8SX CPU" core with 50MHz maximum operation
frequencies and incorporate the 1MB/512KB/384KB large-capacity flash
memory and 56KB/40KB RAM. This H8SX/1663/1653 product Group
offers pin function upward compatibility and peripheral functions such as
AD, TPU and EXDMAC, are strengthened. In addition, H8SX/1668M and
H8SX/1658M have an LVD/POR function that allows the reduction of
external parts. The system development is simple and allows the USB
module to process USB standard commands and virtually automatic USB
state using the hardware. Three types of transfer modes (Control, Bulk and
Interrupt) are supported and with a bulk Endpoint engineered with a double
buffer composition, the high-speed data transmission becomes a reality.
Full-Speed USB2.0 Function
H8SX Family
I2C-Bus:6ch
Endpoint (Pipe)
4 Endpoints
EtherC
LPC
PLL
I/O port
Supply Voltage
(V)
3.0 to 3.6
Operating
Temperature (°C)
−20 to 75
(−40 to 85)
Isochronous Transfer
Not Supported
USB IP/
ZENER
DIODE
H8SX/1668R/1668M Group
H8SX/1658R/1658M Group
The H8SX/1653/1663 Group incorporates abundant
peripheral functions such as high-end H8SX CPU
core and USB communications in a compact package.
The USB communications with PC and the system
control are balances.
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
The H8SX/1668R/1668M Group incorporates low
voltage detection circuit and power-on reset in
addition to the functions of H8SX/1665/1655 Group.
The usability has been improved to reduce the
external parts.
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Full-Speed USB2.0 Function
H8SX Family
Clock
(MHz)
34
*: Clarifying quality grade
24
BSC
H8SS/2218 Group block diagram
ROM
RAM
Clock
Oscillator
H8S-CPU
USB Function
1 port
ROM
BSC
Multiplier
RAM
WDT
INTC
Speed
FS
Speed
FS
DMAC
DMAC
SCI
TPU (16-bit timer): 3ch
EXDMAC
I2C-Bus:4ch
FIFO
128 (Max)*1 312 (Total)*2
SCI:2ch
DTC
A/D
10bit:8ch x 2 Unit
I/O port
TPU (16-bit timer):
12ch
Supported
application
PPG
Mobile
device
Part Number
R4F24569*VRFQV★
R4F24568*VRFQV★
R4F24565*VRFQV★
R4S24562*VRFQV★
R4S24561*VRFQV★
R4F24569*VFQV★
R4F24568*VFQV★
R4F24565*VFQV★
R4S24562*VFQV★
R4S24561*VFQV★
R4F24549*VFPV★
R4F24548*VFPV★
R4F24545*VFPV★
R4S24542*VFPV★
R4S24541*VFPV★
Digital AV
equipment
Pin
144
144
120
Electronic
PC peripheral
music instrument equipment
Package
LQFP
LQFP
LQFP
OA equipment Communication
equipment
Package Code
PLQP0144KA-A
PLQP0144KA-A
PLQ0120LA-A
Industrial
instrument
Memory capacity (Byte)
ROM
RAM
256K
64K
256K
48K
128K
ー
64K
ー
48K
256K
64K
256K
48K
128K
ー
64K
ー
48K
256K
64K
256K
48K
128K
ー
64K
ー
48K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
D/A
8bit:2ch
TMR (8-bit timer): 8ch
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
3.0 to 3.6
3.0 to 3.6
−20 to 75(−40 to 85)
−20 to 75(−40 to 85)
−20 to 75(−40 to 85)
Isochronous Transfer
Not Supported
INTC
Clock
(MHz)
32
32
32
*: Clarifying quality grade ★:New product
Supported
application
Mobile
device
Part Number
HD64F2212FP
HD64F2211FP
HD6432211
(***)FP
HD6432210
(***)FP
HD64F2215RTE
HD64F2215TTE
HD64F2215TE
HD64F2215RBR
HD64F2215TBR
HD64F2215BR
HD6432215B
(***)TE
HD6432215C
(***)TE
HD6432215B
(***)BR
HD6432215C
(***)BR
HD64F2218TF
HD6432217
(***)TF
HD64F2218BR
HD6432217
(***)BR
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
64
LQFP
PLQP0064KC-A
120
TQFP
PTQP0120LA-A
112
P-LFBGA
PLBG0112GA-A
120
TQFP
PTQP0120LA-A
112
P-LFBGA
PLBG0112GA-A
100
TQFP
PTQP0100LC-A
112
P-LFBG
PLBG0112GA-A
Industrial
instrument
Memory capacity (Byte)
RAM
ROM
12K
128K
8K
64K
8K
64K
4K
32K
20K
256K
20K
256K
16K
256K
20K
256K
20K
256K
16K
256K
16K
128K
8K
64K
16K
128K
8K
64K
12K
128K
8K
64K
12K
128K
8K
64K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
Car accessory
ROM Type*
F
F
M
M
F
F
F
F
F
F
M
M
M
M
F
M
F
M
H-UDI
FIFO
128 (Max)*1 456 (Total)*2
(2212, 2218)
256 (Max)*1 1288 (Total)*2
(2215)
Endpoint (Pipe)
4 Endpoints (2212, 2218),
9 Endpoints (2215)
Boundary scan
H-UDI
3.0 to 3.6
WDT
A/D
10bit:6ch
Endpoint (Pipe)
4 Endpoints
SSU
Car accessory
F
F
F
L
L
F
F
F
L
L
F
F
F
L
L
USB Function
1 port
INTC
SH7216
Clock
Oscillator
H8S-CPU
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
H8SS/2456R Group block diagram
I/O port
Sub-clock
Oscillator
Isochronous
Transfer Supported
(2215 only)
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
3.0 to 3.6
−20 to 75(−40 to 85)*
24
−20 to 75(−40 to 85)*
3.0 to 3.6
−20 to 75(−40 to 85)*
24/48
24/48
16/48
24/48
24/48
16/48
−20 to 75(−40 to 85)*
3.0 to 3.6
16/48
−20 to 75(−40 to 85)*
−20 to 75(−40 to 85)*
3.0 to 3.6
24
−20 to 75(−40 to 85)*
*: Wide temperature type
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
bit
USB
Function
H8SX/
1665/
1655
Full-Speed
USB2.0
16
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
bit
USB
Function
In addition to high-speed CPU with 24MHz operation and
128KB/256KB large-capacity flash memory, the
H8S/2212/2215/2218 Group is embedded with abundant
peripheral functions such as DMAC, serial interface, 16-bit
timer, RTC and WDT.
The system development is simple and allows the USB
module to process USB standard commands and virtually
automatic USB state using the hardware. Supports is
furnished for 4 type (H8S/2215 Group) and 3-type (H8S/2212
and 2218 Groups) transfer modes, and because the bulk
Endpoint (the H8S/2215 Group has isochronous support) is
engineered with a double-buffer mode, the high-speed data
transfer becomes a reality. Through USB, meanwhile, an
onboard rewritable flash memory version is also available.
38K0
38K2
Full-Speed
USB2.0
16
H8S/2212/2215/2218 Group
USB IP/
ZENER
DIODE
H8S/2456R/2456/2454 Group
In addition to the high-speed 32MHz (double speed of
16MHz) CPU, 256KB flash memory and 64KB RAM, the
H8S/2456R/2456/2454 Group is embedded with abundant
peripheral functions such as serial interface (Smart Card
I/F), I2C bus, 16-bit timer, 8-bit timer and synchronous serial
communication. The system development is simple and
allows the USB module to process USB standard commands
and virtually automatic USB state using the hardware. Three
types of transfer modes (Control, Bulk and Interrupt) are
supported and with a bulk Endpoint engineered with a
double buffer composition, the high-speed data transmission
becomes a reality. The E10A-USB on-chip emulator
conforming to JTAG I/F is also prepared to provide the
development with a cheaper development tool.
thanks to multichannel serial interface and timer unit.
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
ROAD
MAP
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
H8SX/
1665/
1655
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
38K0
38K2
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
25
applications of consumer, industrial and OA equipment
Full-Speed USB2.0 Function
H8S Family
ROAD
MAP
The H8S/2212/2215/2218 Group is equipped with a strong
communication function. The power management functions
such as sleep mode and standby mode are incorporated
and these groups are suitable for the mobile equipment that
requires low power consumption at the same time.
The H8S/2456R/2456/2454 Group can be applied to various
Full-Speed USB2.0 Function
H8S Family
26
The M16C/6C Group mounts a high-end M16C
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
H8SX/
1665/
1655
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
38K0
38K2
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
27
Block diagram
Block diagram
M16C/60
CPU Core
32MHz
Multiplier
PLL
Sub-clock
32kHz
OCO(125kHz)
Three-phase
Motor Cont
Timer A 5ch
Flash Memory
Data Flash
User Boot
Supported
application
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Part Number
Pin
Package
Package Code
R5F36CAMNFB★
R5F36CAMDFB★
R5F36CAMNFA★
R5F36CAMDFA★
R5F36CAKNFB★
R5F36CAKDFB★
R5F36CAKNFA★
R5F36CAKDFA★
R5F36CAENFB★
R5F36CAEDFB★
R5F36CAENFA★
R5F36CAEDFA★
R5F36CA6NFB★
R5F36CA6DFB★
R5F36CA6NFA★
R5F36CA6DFA★
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
LQFP
PLQP0100KB-A
PLQP0100KB-A
PRQP0100JD-B
PRQP0100JD-B
PLQP0100KB-A
PLQP0100KB-A
PRQP0100JD-B
PRQP0100JD-B
PLQP0100KB-A
PLQP0100KB-A
PRQP0100JD-B
PRQP0100JD-B
PLQP0100KB-A
PLQP0100KB-A
PRQP0100JD-B
PRQP0100JD-B
Industrial
instrument
Memory capacity (Byte)
RAM
ROM
31K
512K
31K
512K
31K
512K
31K
512K
31K
384K
31K
384K
31K
384K
31K
384K
20K
256K
20K
256K
20K
256K
20K
256K
12K
128K
12K
128K
12K
128K
12K
128K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
8bit D/A x 2ch
Serial I/O
Multi-functional×4ch
FIFO
128 (Max)*1 584 (Total)*2
Timer
Multi-functional 16-bit×5
DMAC 4ch
RTC 1 week
LVD
On-Chip-Debug
PWM 2ch
POR
OCO(40MHz)
Timer S
Car accessory
Minimum Instruction
Execution Time
62.5ns
A/D Converter
10-bit×8ch
Speed
FS
HW-I2C bus
10bit A/D x
2 26ch
Oscillation Circuit
2 circuits
DMA Controller
4ch
SIO/UART 6ch
(I2C bus/IE Bus)
CRC
RAM
External Memory
Memory Expansion Mode,
Microprocessor Mode
(Programmable-Wait Function)
WDT
Interrupt
Timer B 6ch
USB Function
1 port
Power Source for USB Pull-up
D+ Pull-up Power Source
(Supply Control)
Endpoint (Pipe)
7 Endpoints
I/O Ports
Input: 1
Programmable I/O: 82
Supported
application
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Isochronous Transfer
Not Supported
Part Number
88 I/O pins
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
ー20 to 85
ー40 to 85
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
★:New product
M30245M8-XXXGP
M30245MC-XXXGP
M30245FCGP
Pin
Package
Package Code
100
100
100
LQFP
LQFP
LQFP
PTQP0100KB-A
PTQP0100KB-A
PTQP0100KB-A
Industrial
instrument
Memory capacity (Byte)
RAM
ROM
5K
64K
10K
128K
10K
128K
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode.
*2. Total number of built-in FIFO.
PLL Frequency Multiplier
Built-in
(USB48MHz generated internally)
CRC Calculation Circuit
Selectable from 2 circuits
(CRC-CCITT/CRC16)
Watchdog Timer
1 channel
USB Function
1 port
Speed
FS
FIFO
1K (Max)*1 3.2K (Total)*2
ROAD
MAP
SH7216
bit
USB
Function
SH7265/
SH7205/
SH7724/ M66592/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
Full-Speed
USB2.0
16
The M30245 (M16C/24 Group) consists of 16-bit single-chip
MCUs with built in USB function control unit confirming to
Full-Speed USB2.0 specifications. With "M16C CPU"
embedded at the core, the M16C family is equipped with
abundant peripheral functions and high-speed processing in
addition to USB pull-up power source circuit, USB clock
generator and various USB control functions. The addition of
a multi-bit serial I/O enables an audio interface function,
while the greater CRC calculating function enhances the
memory card interface. In addition, other steps facilitating the
audio application are implemented, making this system
simple to configure for use in memory card application fields.
Endpoint (Pipe)
9 Endpoints
Vbus Detector
USB cable connection/
disconnection detector
Isochronous
Transfer Supported
Car accessory
Interrupt Factor
33
Pull-up I/O Port
80 (4-port unit)
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
M
M
F
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
ー20 to 85
ー20 to 85
ー20 to 85
16
16
16
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
bit
USB
Function
M30245
H8SX/
1665/
1655
Full-Speed
USB2.0
16
The M16C/6C Group offers the compatibility with the
M16C/6x Group. In addition to various peripheral functions,
built-in two circuits of A/D converter and a 16-bit IC/OC timer
have enriched the peripheral functions furthermore.
The system development is simple and allows the USB
module to process USB standard commands and virtually
automatic USB state using the hardware.
Three types of transfer modes (Control, Bulk and Interrupt)
are supported and with a bulk Endpoint engineered with a
double buffer composition, the high-speed data transmission
becomes a reality. For the development environment, a
single wire on-chip debugger E8a is available to make the
development process simpler by a customer.
card interface are incorporated.
peripheral
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
M16C/6C Group
incorporated.
isochronous Abundant
functions such as audio interface and memory
38K0
38K2
Up to 512KB flash memory and 31KB RAM are
supports
USB IP/
ZENER
DIODE
operation for M16C/60 series.
The M30245 Group is the M16C CPU core that
Full-Speed USB2.0 Function
M16C/20 Series
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
CPU core to realize the highest 32MHz
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Full-Speed USB2.0 Function
M16C/6C Series
28
The 38K0 Group is specialized for Bulk
bit
USB
Function
Block diagram
USB Host-IP consists of OHCI Host-IP, EHCI Host-IP and Renesas original Host-IP, which is
librarized Renesas USB ASSP. It is possible to choose a number of Endpoints and FIFO capacity
according to the system.
*1. It does not support High Band Width of Isochronous and Interrupt type.
One stage of an external HUB can be connected
(When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.)
ROAD
MAP
USB Communication
Function
FS/LS (OHCI)
USB Communication
Function
HS/FS/LS
(EHCI, Renesas original*1)
FIFO
Special memory (with modifiable size) or
external memory area available (OHCI, EHCI)
Special memory 16KByte (Max) (Renesas original)
Endpoint (Pipe)
32 Endpoints (Max) (OHCI, EHCI)
10 Endpoints (Fixation) (Renesas original)
Isochronous
Transfer Supported
Block diagram
Part Number
M38K07M4L-XXXFP
M38K07M4L-XXXHP
M38K09F8LFP
M38K09F8LHP
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Pin
Package
Package Code
64
64
64
64
LQFP
LQFP
LQFP
LQFP
PLQP0064GA-A
PLQP0064KB-A
PLQP0064GA-A
PLQP0064KB-A
Industrial
instrument
Memory capacity (Byte)
ROM
RAM
16K
1K
16K
1K
32K
2K
32K
2K
Car accessory
ROM Type*
M
M
F
F
USB Function
1 port
Bus Interface
8-bit×1
DMA Specification
Pull-up I/O Port
10
Speed
FS
Serial I/O
UART/Clock Sync.
8-bit×1ch
Interrupt Factor
15
FIFO
USB Buffer Max 64
(Built-in RAM is used) *1
A/D Converter
10-bit×8ch
Minimum Instruction
Execution Time
250ns
Endpoint (Pipe)
4 Endpoints
Timer
8-bit×3
(with Prescaler)
PLL Frequency Multiplier
Built-in
(USB48MHz generated
internally)
Isochronous
Transfer Supported
Supply Voltage
(V)
3.00 to 5.25
3.00 to 5.25
3.00 to 5.25
3.00 to 5.25
Operating
Temperature (°C)
Clock
(MHz)
ー20 to 85
ー20 to 85
ー20 to 85
ー20 to 85
12*2
12*2
12*2
12*2
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. This is the oscillation frequency that can be connected to external. For the internal clock, use 6MHz at 3V, and 6MHz or 8MHz at 5V.
Compound USB Hub of Hub + function
Full-Speed USB2.0 Function and Hub
38000 Series
Abundant peripheral functions are embedded to
realize Hub + function application equipment
with one chip.
38K2 Group
Full-Speed
USB2.0
8
bit
USB
Function and Hub
The 38K2 Group consists of 8-bit single-chip MCUs with
built-in USB Hub + USB functions in compliance with
Full-Speed USB2.0. The built-in down stream ports×2, 6
endpoints (USB functions: 4, USB Hub: 2), external bus
interface×1, serial I/O×1, 8-bit timer×3 and A/D converter
(8-channel) enable a variety of USB Hub + USB functions.
In addition, 38K2 Group MCUs are suitable for USB
conversion devices since the internal RAM can be
accessed directly from USB and external interface.
USB2.0 Function
USB
IP
USB-IP
Block diagram
USB Communication Function
FS
USB-IP is librarized Renesas USB ASSP and consists of Full-Speed and Hi-Speed types. It is
possible to choose a number of Endpoints and FIFO capacity according to the system.
USB Communication Function
HS
FIFO
4KByte (Max) (FS)
16KByte (Max) (HS)
Endpoint (Pipe)
16 Endpoints (Max) (FS)
8 Endpoints (Max) (HS)
Isochronous
Transfer Supported
USB2.0 (480 Mbps) supporting
low-capacitance surge absorption Zener diode
HZM6.2/6.8Z4MFA (MPAK-5, 4 elements),
HZM6.2/6.8Z4MWA (MPAK-3, 2 elements),
RKZ6.2Z4MFAKT/RK6.8Z4KT (VSON-5; 4 elements),
HZD6.2/6.8Z4 (SFP, 1 element),
HZL6.2/6.8Z4 (EFP, 1 element)
Protecting an electric equipment and an electron device from ESD surge in
a high-speed signal transmission path.
Electrical characteristics*2
6.2Z4(6.2V) 6.8Z4(6.8V)
Item
Code Test condition
Block diagram
Power Source
for USB Pull-up
D+ Pull-up Power Source
Bus Interface
8-bit×1
DMA Specification
I/O Ports
44
(LED: 4)
Zener voltage
Vz
Reverse leak current
IR
USB Function + USB Hub
1 port+ (2-downstream port)
Pull-up I/O Port
10
Speed
FS
Serial I/O
UART/Clock Sync.
8-bit×1ch
Interrupt Factor
16
FIFO
USB Buffer
Max 64
(Built-in RAM is used) *1
A/D Converter
10-bit×8ch
Minimum Instruction
Execution Time
250ns
Endpoint (Pipe)
2 Endpoints (Hub),
2 Endpoints (Function)
Timer
8-bit×3
(with Prescaler)
PLL Frequency Multiplier
Built-in
(USB48MHz generated
internally)
Isochronous
Transfer Supported
ROM Type*
Supply Voltage
(V)
Operating
Temperature (°C)
Clock
(MHz)
M
M
F
F
3.00 to 5.25
3.00 to 5.25
3.00 to 5.25
3.00 to 5.25
ー20 to 85
ー20 to 85
ー20 to 85
ー20 to 85
12*2
12*2
12*2
12*2
Junction capacitance
Mobile
device
Digital AV
equipment
Electronic
PC peripheral
music instrument equipment
OA equipment Communication
equipment
Part Number
Pin
Package
Package Code
M38K27M4L-XXXFP
M38K27M4L-XXXHP
M38K29F8LFP
M38K29F8LHP
64
64
64
64
LQFP
LQFP
LQFP
LQFP
PLQP0064GA-A
PLQP0064KB-A
PLQP0064GA-A
PLQP0064KB-A
Industrial
instrument
Memory capacity (Byte)
ROM
RAM
16K
1K
16K
1K
32K
2K
32K
2K
Car accessory
C
Min. Typ. Max. Min. Typ. Max.
Iz=5mA
40ms Pulse
5.9
̶
VR=3.5V
̶
VR=5.5V
̶
VR=0V
f=1MHz
2.4
Unit
6.5 6.47
̶
7.0
V
̶
̶
̶
̶
2.0 μA
̶
3.0
̶
̶
̶
μA
̶
4.0
4.5
̶
4.0
4.5
pF
̶
̶
4.0
̶
̶
4.0
pF
elements
1
elements
Dynamic resistance
Supported
application
SH7216
Digital AV
equipment
I/O Ports
48
(LED: 4)
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
Mobile
device
Power Source
for USB Pull-up
D+ Pull-up Power Source
H8SX/
1665/
1655
Supported
application
USB IP/
ZENER
DIODE
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
USB Host-IP
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
Full-Speed
USB2.0
8
The 38K0 Group consists of 8-bit single-chip MCUs with
built-in USB functions in compliance with Full-Speed
USB2.0. The built-in 4 endpoints, external bus interface×1,
serial I/O×1, 8-bit timer×3 and A/D converter (8-channel)
enable a variety of USB functions. In addition, 38K0 Group
MCUs are suitable for USB conversion devices since the
internal RAM can be accessed directly from USB and
external interfaces.
38K0
38K2
38K0 Group
USB
IP
USB IP/
ZENER
DIODE
built-in serial I/O or bus interface.
USB2.0 Host
ESD*3
Rd
Iz=5mA
̶
̶
60
̶
̶
30
Ω
̶
C=150pF
R=330Ω
8
̶
̶
8
̶
̶
kV
10 times forward and
reverse impression
*2 Value per one element *3 Based on IEC61000-4-2 / Judgment with reverse leak current
EVALUATION EVALUATION DEVELOPMENT
BOARD PRODUCTS ENVIRONMENT
It is suitable for one-chip USB converter with
SH7265/
SH7205/
SH7724/ M66592/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
application with a small package.
38K0
38K2
H8SX/ H8SX/1668R/
1653/
1668M
H8S/2212 H8S/2456R 1663/ H8SX/1658R/
M30245 M16C/6C 2215/2218 2456/2454 H8S/2472
1658M
H8SX/
1665/
1655
SH7727/ SH7720/ SH7763/ SH7285/
SH7705 SH7721 SH7760 SH7286
SH7216
SH7265/
SH7724/ M66592/
SH7205/
SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/
SELECTION
R8A66580
SH7764 SH7203 SH7264 SH7723 M66291 M66596
MAP
ROAD
MAP
Full-Speed USB2.0 Function
38000Series
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. This is the oscillation frequency that can be connected to external. For the internal clock, use 6MHz at 3V, and 6MHz or 8MHz at 5V.
29
30
Development Tools for SuperH Family
MCU
Software tool
Group
Series
SH7764★
Renesas Development Environment
Web
http://www.renesas.com/tools
C and C++ compilers
Real-time OS
SH7780
Integrated development
environment and
CASE tools
・ Development environment for getting the most from Renesas microcontrollers
・ Powerful alliances with a wide variety of partner vendors
・ Renesas backs up customer system development efforts with full support services
SH7763
SH7724(SH-MobileR2R)★★
SH7723★
Middleware and drivers
SH7722★
SH7750
Emulators
SH7721
SH7700
Platform
SH7720
HI7750/4
(R0R40775TXW02w)*1
or HI7300/PX
(R0R50730PXW01w)*1*2
HI7700/4(R0R40770TXW02w)*1
or HI7300/PX
(R0R50730PXW01w)*1*2
HI7750/4(R0R40775TXW02w)*1
SH-Ether
http://www.renesas.com/hew
SH7216★★
HI7000/4
(R0R40700TXW02w)*1
SH7205★
HI7200/MP(R0R50720MXW01w)*1
SH7200
Compiler
●An easy to use GUI that is the same for all
Renesas microcontrollers
●Software tools and documentation can be
upgraded easily over the internet
●Coordination with products (such as CASE tools)
from partner companies
−
−
−
R0E572160VKK00*9 ★★(evaluation chip unit)
+ R0E0200F1CKL11★★
R0E0200F0EPU00
Flash Development Toolkit
(user system interface common cable)
(extended profile unit)
(R0C00000FDW04R)★★
R0E0200F1EMU00
+ R0E572167CFK10*10★★
HS0005KCU01H/02H
R0E0200F1ETU00*12
(E200F)
*7*8
(user system interface conversion board for PLQP0176KB-A
(E10A-USB)
(external bus trace unit)
HS0008EASF5H
Note: The emulator software Note: The emulator software [Previous code: FP-176EV]) or R0E572167CFL10*10★★
R0E0200F1MSR00(8MByte)*12
(RS232C) *13 *14
is under development
is under development
(user system interface conversion board for PLQP0176LB-A
(emulation memory unit)
or
[Previous code: FP-176AV]) or R0E572167CBG10*10★★ or R0E0200F1MSR01(16MByte)*12
E8a(USB) *15 *16
(emulation memory unit)
(user system interface conversion board for PLBG0176GA-A
[Previous code: BP-176])
C/C++ Compiler Package
for SuperH Family
(MISRA C supported*4)
HS0005KCU04H(E10A-USB)
SH7265★
R0E0200F0EPU00
(extended profile unit)
R0E0200F1ETU00
(external bus trace unit)
R0E0200F1MSR00 (8MByte)*9
(emulation memory unit)
or R0E0200F1MSR01(16MByte)*9
(emulation memory unit)
R0E0200F1EMU00
(E200F)
*7*8
HS0005KCU01H/02H
(E10A-USB)
−
HI7200/MP(R0R50720MXW01w)*1
HS0005KCU04H(E10A-USB)
−
−
R0E0200F1ETU00 *12
R0E572800VKK00 *9 (evaluation chip unit)
Flash Development Toolkit
(external bus trace unit)
+ R0E572850CFK00*10
(R0C00000FDW04R)★★
R0E0200F0EPU00
(user interface board for PLQP0144KA-A
(extended profile unit)
[Previous code: FP-144LV]) or R0E572860CFK00*10
HS0008EASF5H
R0E0200F1MSR00(8MByte)*12
(user interface board for PLQP0176KB-A
(RS232C)*13*14
(emulation memory unit)
[Previous code: FP-176EV]) or R0E572860CFL00*10
or
or R0E0200F1MSR01(16MByte)*12
(user interface board for PLQP0176LB-A
E8a(USB)*15*16
(emulation memory unit)
[Previous code: FP-176AV])
SH7285★
User system
HI7000/4
(R0R40700TXW02w)*1
SH7280
HS0005KCU01H/02H
(E10A-USB)
−
R0E0200F0EPU00
(extended profile unit)
R0E0200F1ETU00*9
(external bus trace unit)
R0E0200F1MSR00 (8MByte)*9
(emulation memory unit)
or R0E0200F1MSR01(16MByte)*9
(emulation memory unit)
User system
Full-spec emulator
−
−
R0E0200F1EMU00
(E200F)
*7*8
SH7263
SH7260
−
−
SH7203
On-chip debugging emulator
Screen Image of the High-performance
Embedded Workshop
R0E0200F0ETU00*11
(External bus trace unit)
R0E0200F0EPU00
(Extended profile unit)
−
HI7000/4
SH7262★★, SH7264★★ (R0R40700TXW02w)*1
Real-time OS
Build
R0E0200F2EMU00
(E200F)
*7
SH7670★
SH7216★★
Simulator
Debug
−
HI7700/4
(R0R40770TXW02w)*1
Compiler package
Coding
Options
−
HS0005KCU01H/02H
(E10A-USB)
Note: The emulator software for
SH7724 group is under development
Seamless system development provided by Renesas' High-performance Embedded Workshop
The Renesas development environment links the
tools necessary for application development,
including compilers and debuggers (emulator
software), and supports the development process,
from coding through verification, in a single application.
Since this environment provides consistency across the
various tools used provided at each stage in the
development process, development proceeds smoothly
as though these multiple functions were provided by a
single tool.
Programming tool
(flash programming
software,adapter board)
High-performance model
User system interface board
or evaluation chip unit
SH7705
Programmers
Renesas Integrated Development Environment
SH7760
SH7727
Hardware tool
Economy model
C/C++ Compiler Package *3
(integrated development
On-chip debugging emulator
Full-spec emulator
environment bundled) (emulator software bundled)*5 *6 (emulator software bundled)
RTOS
(μITRON)
R0E0200F1EMU00
(E200F)
*7*8
SH7286★
Development Tools for M16C Family
Emulator Lineup
http://www.renesas.com/emulation_debugging
●Wide range of lineup of emulators that can be selected for your purpose ●Easily operatable from High-performance Embedded Workshop
MCU
Software tool
Series
Group
M16C/60
M16C/20
M16C/6C★
M16C/24(M30245)
Hardware tool
RTOS
(μITRON)
C Compiler Package *3
(integrated development environment bundled)
On-chip debugging emulator
(emulator software bundled)
M3T-MR30/4
(R0R30600TRW02wE)*1
C compiler package for R8C, M16C Family (R32C/M32C/M16C)*21
(MISRA C supported *4)
E8a(R0E00008AKCE00)*17
−
Full-spec emulator
(emulator software bundled)
Programming tool*20
(flash programming software, adapter board)
−
Flash Development Toolkit *19 (E8a emulator is required for programming)
*20
PC4701U*18 + M30245T3-RPD-E
On-chip Debugging Emulators
Development Tools for H8SX and H8S Families
E10A-USB
E8a
SH
MCU
Series
Software tool
Group
RTOS
(μITRON)
H8SX
Hardware tool
Economy model
C/C++ Compiler Package *3
(integrated development
On-chip debugging emulator
environment bundled) (emulator software bundled)*5 *6
H8SX/1653
H8S
M16C
The emulator with an excellent cost-performance ratio
●The emulator is capable of evaluating a users system in electric
properties as close as a final product.
●The emulator is USB bus powered and thus external power supply is not
needed.
●PC Interface: USB
H8SX/1668R
The emulator that can be used to program the flash memory
●This product package includes a set of development tools, such as an integrated
development environment, an emulator debugger, a compiler package free evaluation version, and flash development tool kit free evaluation version.
●The emulator is capable of evaluating a users system in electric properties as close as a final product.
●The emulator is USB bus powered and thus external power supply is not needed.
●PC Interface: USB
Web http://www.renesas.com/e10a_usb
H8SX/1658R
H8SX/1600
H8S/2472 , H8S/2462
HI1000/4
(R0R41600TXW01w)*1
Compact Emulator
E6000H
E6000
H8S/2400
M38000T2-CPE
H8S/2456★
H8S/2454★
C/C++ Compiler
Package for H8SX,
H8S, H8 Family
(debug MCU board for PLQP0144KA-A
(MISRA C supported *4)
[Previous code: FP-144LV])
or R0E424548PFK00 *22
(debug MCU board for PLQP0120LA-A
[Previous code: FP-120BV])
or R0E424548PFK01 *22
(debug MCU board for PLQP0120KA-A)
H8S/2218
H8S/2200
SH
H8SX
H8S
HS0005KCU01H/02H
(E10A-USB)
H8S/2212
740
HS0005KCU01H/02H
(E10A-USB)
Only the H8S/2215R,
H8S/2215T corresponds
H8S/2215
The E200F emulator is a high performance emulator with onchip debugging emulation and bus trace functions.
●Real-time emulation with a maximum operating frequency of MCU is available
●PC interface: USB
Highly-functional emulator that provides efficient debugging environment
●Enhanced emulation functions such as C language
source level debugging, trace and break
●PC Interface: USB
Compact in-circuit emulator has many functions and is affordably priced.
●This product package includes a set of development tools, such
as an integrated development environment, an emulator debugger, and a compiler/assembler free evaluation version.
●The compact emulator that supports full-scale development with advanced functions such as real-time trace
●PC interface: USB
Web http://www.renesas.com/e6000h
Web http://www.renesas.com/cpe
http://www.renesas.com/e6000
Flash Development Toolkit
http://www.renesas.com/fdt
● Microcontroller flash memory can be programmed by connecting the E8a and using the Flash Development Toolkit.
In addition, when a USB boot microcomputer is used, it is possible to connect a PC to a microcomputer directly with USB. For information on the target MCUs,
refer to the lists on the next page.
Options
Flash writing
software
Adapter board
Flash
Development
Toolkit*19
HS0008EASF5H
(RS-232C)*13*14
or
E8a(USB)*15*16
HS1653ECN61H
(for PTQP0120LA-A [Previous code: TFP-120])
HS1664ECH61H
(for PLQP0144KA-A [Previous code: FP-144L])
HS1668RECH61H
(for PLQP0144KA-A [Previous code: FP-144L])
HS1658RECN61H
(for PLQP0120LA-A [Previous code: FP-120B])
−
Flash
Development
Toolkit*19★★
HS0008EASF5H
(RS-232C)*13*14
or
E8a(USB)*15
HS0008EASF5H
(RS-232C)*13*14
or
E8a(USB)*15*16
−
HS0008EASF5H
(RS-232C)*13*14
or
E8a(USB)*15
−
Flash
Development
Toolkit*19
HS2214EPI62H
(E6000)
+
HS6000EIU02H
(USB-Adapter)
HS2218ECN61H
HS6000
(for PTQP0100LC-A [Previous code: TFP-100G]) EMS12H(Extended
or HS2218ECB62H
4MB memory board)
(for PLBG0112GA-A [Previous code: BP-112])
HS2212ECH61H
(for PLQP0064KC-A [Previous code: FP-64E])
−
HS2215RECN61H
HS6000
(for PTQP0120LA-A [Previous code: TFP-120])
Note: The package deal type
EMS12H(Extended
or HS2215RECB62H
name above is HS2214EP162H-U
(for PLBG0112GA-A [Previous code: BP-112]) 4MB memory board)
HS0008EASF5H
(RS-232C)*13*14
or
E8a(USB)*15*16
Development Tools for 740 Family
MCU
Series
Software tool
Group
38000
Web http://www.renesas.com/e200f
User cable or user system
interface board
―
Note: For evaluating functions except ADC
(1µs conversion mode) and 10-bit DA output,
E6000H for the H8SX/1668R group can be used.
―
Note: For evaluating functions except ADC
(1µs conversion mode) and 10-bit DA output,
E6000H for the H8SX/1658R group can be used.
H8SX/1655
Full-spec Emulators
E200F
Note: The package deal type
name above is HS1650EPH160H-U
HS0005KCU01H/02H
(E10A-USB)
H8SX/1665
Web http://www.renesas.com/e8a
Full-spec emulator
(emulator software bundled)
HS1650EPH60H*23
(E6000H)
+
HS6000EIU02H
(USB-Adapter)
H8SX/1663
Programming tool
High-performance model
38K0
38K2
Assembler Package *3
(integrated development environment bundled)
M3T-SRA74
Hardware tool
Programming tool
Compact emulator
(emulator software bundled)
Emulator MCU
Package type of target
M38000T2-CPE*17
M38K09RFS
M38K29RFS
PLQP0064KB-A [Previous code: 64P6Q-A] (64-pin 0.5mm-pitch LQFP)
or
PLQP0064GA-A [Previous code: 64P6U-A] (64-pin 0.8mm-pitch QFP)
*20
*1. w="1": evaluation license for one host machine w="5": evaluation license for up to five host machines w="A": evaluation license for up to ten host machines w="K": mass production license for up to 1,000 user systems w="U": mass production license, no limit on the number of user systems
w="Z": mass production license, no limit on the number of user system, with kernel source code*2. HI7300/PX supports SH-4A and SH4AL-DSP microcomputers.*3. The compiler package includes integrated development environment (High-performance Embedded Workshop), compiler,
assembler, simulator debugger and other items. The assembler package includes integrated development environment (High-performance Embedded Workshop, TM), assembler, simulator debugger and other items.*4. MISRA C rule inspection function is added by installing the separately
available MISRA C rule checker SQMlint (type name: R0C00000SCW01R).*5. HS0005KCU01H only uses H-UDI function of device. HS0005KCU02H uses H-UDI function and AUD function of device. However, in case of the device of H8S family, HS0005KCU02H can implement only the debug
using H-UDI function. Only the flash memory version is supported and the ROM-less mode cannot be used.*6. The user interface cable HS0005ECK01H (option) is prepared for the connection to Mictor38pin connector for HS0005KCU02H.*7. A host interface (USB cable) is bundled.*8. You can
use it with system configuration of on-chip configuration.*9. A trace cable (R0E0200F0ACC00) is necessary. When you attach more than one optional product, only one trace cable is used.*10. An evaluation chip unit is necessary.*11. A trace cable (R0E0200F0ACC00) is bundled.*12. An
evaluation chip unit, a trace cable and a user interface board are necessary.*13. The programming software is not bundled. Please purchase one separately.*14. HS0008EASF4H can be also used.*15. With E8a (type name: R0E00008AKCE00), an evaluation version (for free, without support) of
Flash Development Toolkit (type name: R0C00000FDW04R) is bundled as programming software. For development and mass production, please purchase the product version (for value, with support) separately.*16. HS0008EAUF1H can be also used as a USB adapter board.*17. Software for
emulator (integrated development environment High-performance Embedded Workshop, emulator debugger, evaluation version of compiler, evaluation version of Flash Development Toolkit) is included (evaluation version is free, without support). However, the evaluation version of Flash
Development Toolkit is not included with M38000T2-CPE. For the bundled software, a old product or old version may be bundled depending on the shipment time. The latest version can be downloaded from internet (for free). http://www.renesas.com/download*18. The latest version of M16C
PC4701 emulator debugger can be downloaded from internet (for free). http://www.renesas.com/download*19. For Flash Development Toolkit (type name: R0C00000FDW04R), the product version (for value, with support) and the evaluation version (for free, without support) are available.*20.
Programmers made by various partner vendors are prepared.*21. C compiler package for R32C series, C compiler package (M3T-NC308WA) for M32C series and C compiler package (M3T-NC30WA) for M16C series and R8C family are bundled*22. The E10A-USB emulator can be used for
the system development using the terminal for user debug interface (H-UDI) and the dual-purpose terminal by using the debug MCU board.*23. When it is not connected to the user system, the user interface board is necessary.
★New product ★★Under development
3rd Party Programmer Manufacturers
Data I/O Corporation
http://www.dataio.com
SMH Technologies
http://www.softecmicro.com/
E-mail pietro.poletto@smh-tech.com
Sunny Giken Inc.
Sophia Systems
Co., Ltd.
http://www.sophia-systems.com/
E-mail intsales@sophia-systems.co.jp
Wave Technology
Co., Ltd.
http://www.wavetechnology.co.jp/en/contact.html
E-mail e_sales@y1000.com
Yokogawa Digital
Computer Corporation
http://www.yokogawa-digital.com/en/NETIMPRESS.html
E-mail info-impress@yokogawa-digital.com
USB
PC
Flash Development
Toolkit
Flash Support
Group, Inc.
E8a(R0E00008AKCE00)
http://www.j-fsg.co.jp/e/form_ask01.html
USB device
USB
Minato Electronics Inc.
http://www.minato.co.jp/en/index.html
E-mail int-support@minato.co.jp
SUISEI ELECTRONICS
SYSTEM CO., LTD.
http://www.suisei.co.jp/index_e.html
E-mail support@suisei.co.jp
support_apl@renesas.com (Renesas Solutions Corp.)
E-mail http://www.sunnygiken.co.jp/english/
USB Development / Evaluation Products
Layer configuration of USB driver
Outline of function
Application
・User application inherent in system
・Software library required for realizing functions of
the system such as video, image, audio and file system
Middleware
USB driver
・USB device class driver conforming to
various USB device classes
USB device class firmware
・USB hardware control driver
(Enumeration, device status management and
data communications are realized)
USB basic firmware
Hardware
・USB device
USB Driver Correspondence Table
Function
Type name
USB basic
firmware
SH7722
◎*1
SH7723
◎*1
Host
USB device class firmware
HID
Mass Storage
Comm.
Printer
USB basic
firmware
USB device class firmware
Mass Storage
◎*1
SH7203/SH7263
◎
*
*
◎
○*1
SH7205/SH7265
◎
*
*
◎
○*1
SH7262/SH7264
◎
*
*
◎
△*1
◎
△*1
SH7670
◎
*
*
SH7285/SH7286
◎*2
△
◎
SH7216
◎*2
◎
◎
◎
SH7705
◎*2
◎
◎
◎
SH7727
◎*2
◎
◎
◎
◎
SH7720
◎*2
◎
◎
◎
◎
◎
SH7760
◎*2
◎
◎
◎
H8SX/1653
◎*2
◎
◎
◎
H8S/2456
◎*2
◎
◎
◎
◎
H8S/2472
◎*2
◎
◎
◎
◎
H8S/2212,H8S/2218
◎*2
◎
◎
◎
◎
H8S/2215
◎*2
◎
◎
◎
◎
M16C/6C
◎*2
◎
◎
◎
◎
M30245
◎
38K0,38K2
◎
○
M66291
◎
○
M66591
◎
◎
(M66596: OS-noncompliant
M66596/R8A66597
◎*1 version is also provided)
R8A66580
△(USB,Wireless USB)*1
△
○*1
−
◎
−
SH7763
M66592
HID
−
◎
−
△
OS-noncompliant
◎*1(M66596:
version is also provided)
○*1
○*1(R8A66597 only)
△(USB)*1
◎: Sample (free of charge) ○: On sale △: Under development * : Under consideration ー: N/A
(Note) 1. Only OS-compliance version is provided. For the item without a mark (without 1), only OS-noncompliant version is provided. *2. USB Basic Firmware is included in each USB Device Class Firmware.
*
*
Demo Board/Evaluation Board
Hi-Speed MCU
Demo Board / Evaluation Board
Full-Speed/Hi-Speed USB ASSP
P0K572630D001BR<SH7263 Evaluation Board>
SH7722 Solution Engine
M3A-0032<M66291GP Utility Board>
M3A-0037G01<M66591GP Utility Board>
Equipped with hardware required
to evaluate the SH7263 USB,
LCDC, SSI and other functions of
the SH7263. Standard
embedding of USB interface,
LCD module interface, audio
interface, and other advantages
and is suitable for advanced
development of USB application products such as digital audio
devices. In addition, all I/O ports of SH7263 are connected to the
expansion connectors, enabling simple evaluation of peripheral
functions and H/W expansion.
Evaluation board embedded with
the H/W for evaluating the
H.264/MPEG4 dynamic picture
image, camera, USB, LCDC, SD
Card, and other functions of
SH7722. An environment where
a main OS, such as a μITRON or
WindowsCE, can function and
the on-chip debugger can connect as ready.
It is also possible to use this as an easy program evaluation board in
combination with a simple monitoring program. This board is a
product of Hitachi ULSI Systems Co., Ltd.
A utility board embedded with the
H/W required for M66291GP and
USB communication. Two PCB
connectors (13-pin x 2-line) are
prepared for microprocessor
connection. This connector is
compatible with other Renesas
USB ASSP utility boards, and is
easily connectable to systems using Renesas USB ASSP. This
comes equipped with a 12-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for bus mode selection
(expansion function of the M66291GP).
A Utility board equipped with the
H/W required for M66591GP and
USB communication, and
including controlled D+/D- line
impedance matching. Features
two built-in PCB connectors (25pin x 2-line) for MCU board and
split bus connections. These
connectors are compatible with other Renesas USB ASSP utility
boards, and easily connectable to systems using Renesas USB ASSP.
This comes equipped with a 24-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for interface power supply change.
M3A-0038G01<M66592FP Utility Board>
M3A-0039<M66596FP Utility Board>
A utility board embedded with the
H/W required for M66592FP and
USB communication, and
including controlled D+/D- line
impedance matching. Features
two built-in PCB connectors (25pin x 2-line) for MCU board and
split bus connections. These
connectors are compatible with other Renesas USB ASSP utility
boards, and easily connectable to systems using Renesas USB ASSP.
This comes equipped with a 24-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for interface power supply change.
A utility board embedded with the
H/W required for M66596FP and
USB communication, and including
controlled D+/D- line impedance
matching. Features two built-in
PCB connectors (25-pin x 2-line)
for MCU board and split bus
connections. These connectors are
compatible with other Renesas USB ASSP utility boards, and are easily
connectable to systems using Renesas USB ASSP. This comes
equipped with a 24-MHz quartz-crystal oscillator, USB connector, test
pin, and jumper SW for interface power supply change.
Demo Board/Evaluation Board
Full-Speed MCU
SH7721 Solution Engine Light
SH7727 Solution Engine Light
HSB8SX1653F, HSB8SX1654F <H8SX/1653 Group Evaluation Board>
HSB8SX1663F, HSB8SX1664F <H8SX/1663 Group Evaluation Board>
Evaluation board embedded with
the H/W for evaluating built-in
USB, LCDC, SIOF and other
functions of SH7720 and SH7727.
The environment where main OS
such as μITRON and the on-chip
debugger connection run is ready.
Connection with various USB
ASSP utility boards (*1) is possible
through relay board M3A-ZA53. It is also possible to use it as an easy
program evaluation board in combination with a simple monitor program.
This board is a product of Hitachi ULSI Systems Co., Ltd.
*1: Option : M3A-0032,M3A-0037G01,M3A-0038G01,M3A-0039,M3A-0040
Evaluation board for CPUs
equipped with the H8SX/1653 or
1663 Groups. Application as a
program evaluation board by
connecting a full emulator or an
on-chip emulator. This board is a
product of Hokuto Denshi Co.,
Ltd.
HSB8S2215RST <H8S/2215 Group Evaluation Board>
HSB8S2215ST <H8S/2215 Group Evaluation Board>
HSB8S2218ST <H8S/2218 Group Evaluation Board>
HSB8S2212ST <H8S/2212 Group Evaluation Board>
These boards contain the
H8S/2215, H8S/2218 and
H8S/2212 group, and it is
possible to use them as an easy
program evaluation board in
combination with a monitor
program. Emulator connection is
possible and the flash chip is
loadable. In addition, the USB starter's kit is also available as an
evaluation kit.
M3A-0040<R8A66597FP Utility Board>
M3A-0245 <M16C/24 Group M30245 Evaluation Board>
Equipped with hardware required to
evaluate USB and other peripherals
functions of M30245. Loading of
emulator connection or a flash-chip
is possible. The board M3A-7754*1
for pitch conversion board can be
connected and program rewriting of
a flash-chip is easy. Moreover, since
the connector which can be used to expand the universal board etc. is
supported, the functional evaluation according to the use is possible. It can
be used as an easy program evaluation board in combination with a simple
monitor program. *1: Option
A utility board embedded with the
H/W required for R8A66597FP and
USB communication and including
controlled D+/D- line impedance
matching. Features two built-in
PCB connectors (25-pin x 2-line)
for MCU board and split bus
connections. These connectors are
compatible with other Renesas USB ASSP utility boards, and are easily
connectable to systems using Renesas USB ASSP. This comes
equipped with a 24-MHz quartz-crystal oscillator, USB connector, test
pin, and jumper SW for interface power supply change.
Demo Board / Evaluation Board
USB ASSP Evaluation Tool
M3A-ZA53<for SuperH Solution Engine>
Converter Board for USB ASSP Utility Board
M3A-8K02 <38K0 Group/38K2 Group Evaluation, Development Board>
M3A-0033<Renesas USB ASSP Evaluation Motherboard>
Evaluation/development board for the
38K0 Group and 38K2 Group.
Embedded with circuits needed for
USB function and USB hub,
application of the external circuit use
universal board (G04) facilitates simple
development and evaluation of USB
systems. Replacing the two-board set
upper surface boards (G02, G03) makes it possible to conduct inspections with
both flash-chips and debuggers. Since it is possible to exchange Vcc = 5V/
3.3 V, and USB rewriting/serial rewriting of flash memory with an easy
switch, changes in peripheral setup can be performed in a short time.
CPU board with a simple
debugger embedded with
M16C/80. By combining it with
various USB ASSP utility boards
(*1), all Renesas USB ASSP can
easily be evaluated. It comes
equipped with M16C/80, 10
MHz, a RS-232C driver, and
interface connector for PC.
Relay board for evaluating
Renesas USB ASSP from the
SuperH Solution EngineTM using
various USB ASSP utility boards
(*1). It can be used in combination
with the processor system Solution
EngineTM (*2) and various USB
ASSP utility boards.
*1. Option:M3A-0037G01,M3A-0038G01,M3A-0039,M3A-0040
Bundle:M3A-0032
*1. Option: M3A-0032, M3A-0037G01, M3A-0038G01, M3A-0039, M3A-0040
*2. Option: SH7727, SH7721
(An instance)
REJ01B0005-0700