MEASURING & ESTIMATING TOOLS
SCALE MASTER II
®
Advanced Digital Plan Measure with Optional PC Interface
Contractors • Estimators • Engineers • Architects • Landscapers
Pipeline Builders • Excavators • Concrete Contractors
Plumbers • HVAC Contractors • Fencing Specialists
Telecommunications & Cable System Contractors
Pavers • Electrical Contractors • And Many More!
n Fast take-offs
improve productivity
n Accuracy helps to
ensure profitability…
proper use provides
error-free Linear,
Area and Volume
take-offs
n Versatility of multiscale capabilities…
91 built-in scales
and 8 “custom”
scales cover all
practical print and
plan applications
n PC interface
capability means
valuable entry time
is reduced, keystrokes
are minimized and
transposition errors
are eliminated
Scale Master II makes it easy for you to do Linear,
Area and Volume take-offs with speed, accuracy
and confidence. Whether you’re responsible for
estimating, bidding or planning, Scale Master II
offers the ultimate in take-off capabilities. Its
optional PC Interface Kit makes it simple to
input any value directly into spreadsheet or
estimating programs using Windows® 95, 98,
ME, XP or 2000 for even greater time
savings and convenience.
■ 91 Built-in Scales
50 Imperial (Feet-Inch) units, 41 Metric
for maximum versatility in architectural,
engineering and civil/map scaling.
■ Eight “Custom” Scales
Four each for Imperial and Metric units,
lets you “roll” or define any scale, even
from plans that have been reduced,
enlarged or are unscaled. And, each can
be permanently stored for later use.
■ Dedicated
Length and Width Keys
Lets you roll, store and recall Length,
Width (and Height) values, and easily find
Rectangular Areas and Volumes instantly.
■ Lock Switch
Locks in the mode and scale to prevent
changing them while rolling.
■ AutoCount Feature
Automatically “counts” how many times
your pre-set distance has been rolled.
Great for automatic stud counts, columns,
fence posts, outlets, fixtures, or any other
regularly spaced items.
■ Count While Rolling
Push-button counter lets you count items
as you roll (i.e., studs, piers, outlets, etc.).
■ Constant (+K) Key
Allows you to add (or subtract) a constant
value to the distance measured. Great for
“drops” and add-ons.
ETRIC
ODE
BUILT-IN
Model 6130
■ Wide Range of Dimensional Units
Use best-suited units to fit your work:
Decimal Feet, Feet-Inches, Decimal
Inches, Yards, Miles, Nautical Miles,
Acres. Also Millimeters, Meters,
Kilometers, Hectares — most available
in square and cubic formats.
■ Subtract Key
Deducting rolled lengths is now intuitive
and easy.
■ Accumulating (M+) Memory
Allows easy totalling of dimensions or
counts — perfect for multi-page plans.
Optional PC Interface Kit
For use with the Scale Master II
Fully compatible with Windows® 95, 98, ME, XP or 2000.
Transfer measurements and counts directly from the Scale
Master II into any commonly used spreadsheet or estimating
program. Save keystrokes and time compared to manual input.
Reduce costly errors in bidding and estimating.
Model 6215
Scale Master II Specifications
SIZE:
7.2" x 1.6" x 0.6" (182 mm x 41 mm x 15 mm)
WEIGHT:
2.4 oz. (68.04 gm) including Case
POWER:
Two 3-volt (CR-2430) Batteries (included). Battery Life: Use 400+ hours; Storage 2+ years
DISPLAY:
7 Digit LCD with Full Annunciators
WHEEL RESOLUTION:
0.025" (0.635 mm)
WHEEL COMPOSITION:
Celcon® Polymer
ENTRY SYSTEM:
Bi-directional Rolling
ACCURACY:
10 Digits Internal Math Accuracy; 99.75% Measuring Accuracy
5 2-3% User Accuracy (based on start/stop point)
DISPLAY CAPACITY:
7 Digit Main Display; 3 Digit Count Display
INCLUDED WITH EVERY
CI PRODUCT:
Easy-to-Follow User’s Guide,
Protective Carrying Case (Except DigiRoller Plus and desktop calculators)
Long-Life Lithium Batteries (Except Construction Master Pro DT Printer)
FULL ONE-YEAR
WARRANTY:
All Calculated Industries calculators and electronic tools are covered by a Full One-Year Limited
Warranty against defects in materials and workmanship. The full text of each warranty is published
in the documentation accompanying each product and at www.calculated.com. Calculated Industries
reserves the right to make changes in the materials and specifications of products without notice.
PC Interface Kit Specifications
KIT INCLUDES:
Ten foot (3.04 Meter) Interface Cable with 9-pin Serial Port Connector; USB Port Adapter;
PC Software – SM2 Connect Interface Software for Windows (Compact disk only); Easy-to-Follow
written Installation and Operation Guide.
SYSTEM REQUIREMENTS:
133 MHz or Higher CPU; Windows® 95, 98, ME, XP or 2000; CD-ROM or DVD-ROM drive;
Scale Master II Digital Plan Measure; Available Serial or USB port.
MEMORY REQUIREMENTS: 250K free disk space; 16 MB in RAM