MAP NO.
879-010179
REV
06
P00
777I20746
777D00132
AUGER CONTROL
Halogen
5
4
CUT OUT
3
Remote Pitch Control
CHUTE
DIRECTIONAL CONTROL
CHUTE
TILT
CONTROL
F
2
1
R R1
D00132
Release for Production
DATE
BY
4/9/02
J.Catherwood
04/10/02
J.Catherwood
777I20410
6
Headlight
REVISIONS
DESCRIPTION
Removed 777D00179 and D01301. S32065 replcd
S30511 and S32066 replcd S30514.
R2
CLOCKWISE TO
DISCHARGE LEFT
•
•
•
•
•
•
TRACTION CONTROL
INSERT IGNITION KEY INTO SLOT.
MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
PUSH START BUTTON OR PULL ROPE HANDLE
TO START ENGINE.
SELECT SPEED REQUIRED. SQUEEZE RIGHT
TRACTION CONTROL LEVER TO MOVE.
RELEASE TO STOP.
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
777D05236
SIDE OF ENGINE
FOR SNOWTHROWING, ENGAGE LEFT AUGER
CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
•
COUNTER CLOCKWISE
TO DISCHARGE RIGHT
READ OPERATORS MANUAL BEFORE STARTING.
RECOIL STARTER: PUSH PRIMER 2 OR 3 TIMES.
ELECTRIC STARTER: DO NOT PRIME.
TO STOP ENGINE, PULL OUT IGNITION KEY.
10 HP
®
777I20327
ON IMPELLER HOUSING
PIN IN WHEEL FOR
STRAIGHT AXLE ACTION
PIN IN AXLE FOR
DIFFERENTIAL ACTION
Electric Start
777S32065
ON EDGE OF CHUTE
READ FROM
CHUTE POSITION
DANGER
DO NOT LINE UP WHEEL PIN
HOLE WITH AXLE PIN HOLE
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS. USE CLEAN-OUT TOOL TO
UNCLOG DISCHARGE CHUTE.
DO NOT UNCLOG DISCHARGE CHUTE WHILE
ENGINE IS RUNNING.
SHUT OFF ENGINE AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS HAVE
STOPPED BEFORE UNCLOGGING.
777S32066
FRONT TOP OF
AUGER HOUSING
FACING OPERATOR
DANGER
1. KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET.
2. USE CLEAN-OUT TOOL TO UNCLOG
DISCHARGE CHUTE.
3. DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
4. TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN OPERATING ON
GRAVEL SURFACES.
5. READ OPERATOR'S MANUAL.
MODEL PLATE
777D05318
TOP OF AUGER HOUSING NOT FACING OPERATOR
10 HP / 30"
®
Electric Start • Single Hand Operation • 12" Impeller
CLEAN-OUT TOOL
DRAWN BY
A.SCHAEDLER
DATE:
DATE:
APPR. BY
DATE:
J. CATHERWOOD
J. CATHERWOOD
MTD PRODUCTS INC
P.O. BOX 368022
CLEVELAND, OH 44136-0015
3/11/02
CHECKED BY
4/10/02
4/10/02
ITEM DESCRIPTION
SHEET
1
OF
1
31AE663H401
MAP NO.
879-010179
REV
P00
AVOID INJURY FROM
ROTATING AUGER KEEP HANDS, FEET
AND CLOTHING AWAY.
DANGER