Pure power tolls 10.8V Li-ION Specifications

10.8V Li-ION
Multi-tool
Original
Instructions
Read instructions before operating this tool.
EC - DECLARATION OF CONFORMITY
PURE RANGE – MULTI-TOOL
TABLE OF CONTENTS
EC - Declaration of Conformity
Important Information
02
12 Month Limited Warranty
General Safety Rules
03
Additional Specific Safety Rules
Labels and Symbols
05
Machine Overview
07
Specification
08
Operation
08
Maintenance
09
Environmental Protection
09
Service Parts Lists
09
03
03
06
We, the importer
Evolution Power Tools Ltd.
Venture One
Longacre Close
Sheffield
S20 3FR
Declare that the product
Part numbers: PUREMULTI17
Pure 10.8V Li-ION Multi-tool
Complies with the essential requirements
of the following European Directives:
2006/42/EC – Machine Directive
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2002/95/EC – Restriction of the use of
Certain Hazardous Substances in Electrical
and Electric Equipment
Standards and Technical specifications
referred to:EN60745-1:2009
EN60745-2-4:2009
All documentation is held on file at the
above address and is available, on request
for review.
Authorised Signatory
Date: 1/8/2010
Name: Mr Matthew J Gavins
Position: Managing Director
Year of Manufacture: 2010
2
10.8V Li-ION
Multi-tool
IMPORTANT
Please read these operating and safety
instructions carefully and completely.
For your own safety, before using this
equipment check that the voltage is correct
and that all handles and parts are firmly
secured. If you are uncertain about any
aspect of using this equipment, please
contact our Technical Helpline.
Technical Helpline UK 0870 609 2297
Technical Helpline USA 1-866-EVO-TOOL
PURE MUTI-TOOL
Congratulations on your purchase of
an Evolution Power Tools Pure 10.8V
Multi-Tool. Please complete your product
registration online to validate your
machine’s warranty period and ensure
prompt service if needed. We sincerely
thank you for selecting a product from
Evolution Power Tools.
12
MONTH
LIMITED
WARRANTY.
Evolution power tools reserves the right to
make improvements and modifications to
design without prior notice.
Evolution Power Tools will, within twelve (12)
months from the original date of purchase,
repair or replace any goods found to be
defective in materials or workmanship. This
warranty is void if the tool being returned has
been used to sand / chisel materials beyond
the recommendations in the Instruction
Manual or if the tool has been damaged by
accident, neglect, or improper service. This
warranty does not apply to machines and
/ or components which have been altered,
changed, or modified in any way, or subjected
to use beyond recommended capacities
and specifications. Electrical components
are subject to respective manufacturers’
warranties. All goods returned defective
shall be returned prepaid freight to Evolution
Power Tools. Evolution Power Tools
reserves the right to optionally repair or
replace it with the same or equivalent item.
There is no warranty – written or verbal – for
cutting/scraping blades. In no event shall
Evolution Power Tools be liable for loss or
damage resulting directly or indirectly from
the use of our merchandise or from any
other cause. Evolution Power Tools is not
liable for any costs incurred on such goods
or consequential damages. No officer,
employee or agent of Evolution Power Tools
is authorised to make oral representations
of fitness or to waive any of the foregoing
terms of sale and none shall be binding on
Evolution Power Tools. Questions relating
to this limited warranty should be directed
to the company’s head office, or call the
appropriate Helpline number.
1. GENERAL SAFETY RULES
WARNING
When using electric tools, basic
safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal injury.
Please read all of these instructions before
attempting to operate this machine. Save
this manual for future reference.
1. Keep work area clear. Cluttered work
areas invite accidents.
2. Consider work area environment. Do
not expose tools to rain. Do not use tools in
damp or wet locations. Keep work area well
lit. Never use tools near flammable liquids
or gases.
3. Protect yourself against electric shock.
Avoid body contact with earthed or grounded
surfaces.
4. Keep other people away. Do not let others,
especially children, come close to the work,
and touch the tool or the extension lead.
Keep them away from the work area.
3
5. Store idle tools. When not in use, tools
should be stored in a dry locked-up place,
out of children’s reach.
6. Never force the tools. Your tools will be
more efficient and safer when used at the
rate for which they were intended.
7. Use the right tool. Do not force small tools
to do the job of a heavy duty tool. Do not use
tools for purposes not intended; for example
do not use circular saws to cut tree limbs
or logs.
8. Dress properly. Do not wear loose clothing
or jewellery which may get caught in moving
parts. Non-skid footwear is recommended
when working outdoors. If you have long
hair, tie it back and wear protective hair
covering.
9. Use protective equipment. Use safety
glasses. Use face or dust mask if cutting
operations create dust.
10. Connect dust extraction equipment. If
the machines have a connection for dust
extraction equipment, ensure these are
connected and properly used.
11. Do not damage the cable. Never pull
the power cable to disconnect the machine.
Keep the cable away from heat, oil and
sharp edges.
12. Secure workpiece. Where possible,
use clamps or a vice to hold the workpiece.
It’s much safer than using your hands.
13. Don’t over reach. Keep proper footing
and balance at all times.
14. Maintain tools in good working condition.
Keep cutting tools sharp and clean for better
performance and optimum safety. Follow
instructions for lubricating and changing
accessories. Inspect power cables regularly
and, if damaged, have them replaced by an
authorised service centre. Inspect extension
cables regularly and replace immediately if
damaged. Keep handles dry, clean and free
from oil and grease at all times.
4
15. Disconnect tools. Disconnect tools from
the power supply when not in use, before
any maintenance operation and when
changing accessories such as blades, bits,
cutters, etc.
16. Remove adjusting keys and spanners.
Get into the habit of checking that adjusting
keys and spanners have been removed from
the machine before turning it on.
17. Avoid unintentional starting. Ensure
switch is in “off” position before plugging in
the machine.
18. Use proper extension leads. When the
tool is used outdoors, use only extension
leads intended for outdoor use and labelled
as such.
19. Stay alert. Concentrate on what you
are doing, use common sense and do not
operate the tool when you are tired.
20. Check that no part is damaged. Before
using a tool, make sure that it is in good
working order. Check the alignment and
condition of moving parts, mounting and any
other aspect that may affect its operation. A
guard or other part that is damaged should
be properly repaired or replaced by an
authorised service centre unless otherwise
indicated in this instruction manual. Do not
use the tool if the switch does not turn on
and off.
21. Warning. The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22. Have your tool repaired at an
authorised service centre. This electric
tool complies with current safety rules.
Repairs should only be carried out by an
authorised service centre using original
spare parts. Failing this, the user could
expose themselves to considerable danger.
10.8V Li-ION
Multi-tool
HEALTH ADVICE
Warning!
When drilling, sanding, sawing or grinding,
dust particles will be produced. In some
instances, depending on the materials
you are working with, this dust can be
particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
You should:
-Work in a well-ventilated area.
-Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY
YOUR MULTI-TOOL
RULES
FOR
1. Do not expose to rain or water.
2. Do not drop, shake or strike the battery.
3. Wear hearing protection when necessary.
Exposure to noise can cause hearing loss.
4. Cutting blades and accessories can
become very hot. Take care when changing
or handling any bits or accessories.
3. Recharge the battery only with the
charger specified by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
4. Use this power tool only with specially
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
5. When the battery pack is not in use,
keep it away from other metal objects like
paper clips, coins, keys, nails, screws or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
6. Under extreme conditions electrolyte
may be leak from the battery. If contact
accidentally occurs, flush your skin with
water. If electrolyte contacts your eyes,
additionally seek medical help. Electrolyte
from the battery may cause irritation or
burns.
7. Hold the tool by the insulated gripping
surfaces, especially when performing an
operation where the cutting bit may contact
hidden wiring. If the cutting tool contacts
a ‘live’ wire, exposed metal parts of the
power tool could become ‘live’ and give the
operator an electric shock.
8. If possible, use clamps or a vice to hold
your work.
9. When cutting into walls, floors or similar
areas, make sure, as far as possible, that
there are no services (gas or water pipes,
electric cables etc) in the path of the
cutting blade. Striking hidden services
could cause injury to the user and damage
to the property.
10. Always hold the tool with both hands
for maximum control. Keep proper footing
at all times.
11. Keep hands away from the cutting area.
Do not reach under material being cut.
12. Do not use bent, dull or damaged blades.
13. Exercise caution when handling any
of the accessories. The accessories
(particularly blades) are very sharp.
14. Before beginning scraping, check the
workpiece for embedded nails etc. If there
are nails etc, either remove them or set them
well below the intended finished surface.
15. Do not ‘wet’ sand with this tool. Liquids
entering the motor housing is an electrical
hazard. Never work in an area which is
soaked with a liquid. There could be an
electrical shock hazard if you were to use
this tool in such conditions.
5
16. Always wear appropriate safety glasses
when using this machine. Every day
glasses are NOT safety glasses.
WARNING
This machine is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning the safe use of the
machine by a person responsible for their
safety.
Children should be supervised to ensure
that they do not have access to, and are
not allowed to play with, this machine.
SAFETY LABELS & SYMBOLS WARNING!
Do not operate machine if warning and
/ or instruction labels are missing or
damaged. Contact Evolution Power Tools
for replacement labels.
Symbol
Description
V
Volts
A
Amperes
Hz
Hertz
Min
Speed
~
Alternating Current
No
No Load Speed
-1
Double Insulated
Wear Safety
Goggles
Wear Ear Protection
6
10.8V Li-ION
Multi-tool
Annotated photograph of Multi-Tool
4
7
5
8
6
2
3
1
1. SCRAPER BLADE
2. CUTTING BLADE
3. DETAIL SANDING ATTACHMENT
4. HANDLE
5. ON/OFF SLIDE SWITCH
6. SPINDLE
7. INSERTED BATTERY PACK
8. BATTERY PACK LOCKING TAB
7
SPECIFICATION
OPERATING INSTRUCTIONS
Note: Before using this tool, read the
instruction manual carefully.
PURE MULTI-TOOL
Voltage:
No Load Speed:
10.8V-DC
17000 - oscillations per minute
Noise and Vibration Data
Sound Pressure:
Sound Power:
Vibration:
LPA 75.5dB(A) K=3dB
LWA86.5dB(A) K=3dB
4.139 m/s2 K 1.5 m/s2
The declared vibration total value has
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used. The need
to identify safety measures and to protect
the operator are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating
cycle, such as the times the tool is switched
off, when it is running idle, in addition to
trigger time)
Accessories
Instruction Manual
Scraper Blade
Cutting Blade
Tri-Form Sanding Pad
Sandpaper
Allen Key
8
1pc
1pc
1pc
1pc
1pc
1pc
BEFORE USE
A Battery Pack must be inserted into the
tool as detailed below. It is important that
the Battery Pack is of the designated type
recommended for this machine.
Newly purchased Battery Packs do not
come fully charged. Please refer to
the PURE CHARGER MANUAL for full
details on how to charge the Battery
Pack for this machine
1. INSTALLING OR REMOVING THE
BATTERY PACK
Check that the battery pack is of the
designated type for this machine. We
recommend that the slide switch is locked
in the OFF position when removing or
inserting the Battery Pack. Refer to section
2 below.
a. Slide the Battery Pack into the end of
the tools handle. The Battery can only fit
one way round.
b. Gently push the Battery Pack fully into
the tools handle to engage the locking
tabs. The electrical connections inside the
handle will be made automatically.
c. To remove the Battery Pack, simply
press the two locking tabs with your finger
and thumb and withdraw the Battery Pack
from the handle.
2. ON/OFF SLIDE SWITCH
This tool is fitted with a slide switch. When
pushed forwards with your thumb the
switch will automatically lock in the ‘ON’
position.
To switch ‘OFF’ press the rear of the slide
switch (labeled ‘OFF’) and the switch will
return to the ‘OFF’ position.
10.8V Li-ION
Multi-tool
3. INSTALLING/REMOVING
ACCESSORIES
Before mounting any attachments, make
sure that the battery pack is removed from
the machine to avoid the risk of accidental
starting.
Note: We recommend that the operator
considers wearing protective gloves when
handling or changing the scraping or
cutting blades.
a. Loosen and remove the hexagonal
socket bolt in the spindle with the allen key
provided.
b. Mount the accessory onto the spindle
head at the desired angle and secure it
with the hexagonal socket bolt.
c. Check that the accessory sits correctly
on the spindle drive head, and that all four
spindle head drive pins are located in the
accessories drive holes.
4. SANDING SHEETS
This tool uses hook and loop backed
sandpaper, which grips firmly the backing
pad when applied with moderate pressure.
To change, simply peel off the old
sandpaper, remove dust from the backing
pad if necessary, and press the new
sandpaper in place.
Note: When removing the backing pad,
peel of the sanding sheet to expose the
hexagonal socket bolt.
5. APPLICATION
This is a versatile tool which will be of use
in many applications. Your Multi-Purpose
Tool can be used for sanding, and sawing
wooden materials, plastic and plaster. It
can also be used for working on soft walls
and wall tiles, and for dry sanding and
scraping of small surfaces.
It is especially suitable for working close to
edges and for flush cutting.
WARNING
Before using this tool, assess the working
environment and take all necessary safety
precautions for operator safety.
These may include the use of dust masks,
eye protection, and safety gloves etc.
Always hold the tool with both hands to
ensure full control.
Allow the very high speed oscillation of the
attached accessory to do the work. It is not
necessary to force the tool or to apply even
moderate pressure. Gently guidance of the
tool by the operator is all that is required.
6. MAINTENANCE
Your Multi-Tool requires no additional
lubrication or maintenance. There are no
user serviceable parts in your power tool.
Keep the tool clean, but do not use chemical
cleaners which may damage the plastic
parts. Clean with a dry cloth. Ensure that the
motor ventilation slots are kept clean.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
9
Notes
10
10.8V Li-ION
Multi-tool
Notes
11