Cisco 2600-DC Series Modular Access Platform

DATA SHEET
2600-DC Series
Modular Access Platform
Cisco
Cisco Systems Extends Versatility,
Integration, and Power of the Cisco 2600
Series Modular Access Platform series
to Service Provider central offices and
Data Communications Networks.
As part of a scalable Data Communications
Network (DCN) solution, including the Cisco
Catalyst® 1924-DC switch, Catalyst 2924M-XL
switch, Catalyst 4003-DC switch, Cisco 3662-AC/
DC-CO, Cisco 3640, Cisco 3631-CO, and Cisco
2600 Series modular access platforms, the Cisco
2600 Series supports central office (CO) serial,
X.25 and Internet protocol/open system
interconnection (IP/OSI) interfaces for operations
management in Service Provider, Inter-Exchange
Carrier (IXC), and Post, Telephone and Telegraph
(PTT) networks. The Cisco DCN solution
supports synchronous optical network/
synchronous digital hierarchy (SONET/SDH)
network element (NE) connectivity for alarm
monitoring and control, remote provisioning, and
software download. Other operations systems
network applications include local number
portability and billing data collection. In addition,
competitive local exchange carriers (CLECs) can
use the Cisco 2600 in small point of presences
(POPs) or central office colocations for digital
subscriber line access multiplexers (DSLAMs),
voice switches, and transmission operations
networking.
The modular architecture of the Cisco 2600 Series
allows interfaces to be upgraded to accommodate
network expansion or changes in technology as
new services and applications are deployed.
Service providers can integrate the functions of
multiple, separate devices into a single, compact
unit, thereby reducing the complexity of
managing DCN infrastructures. For example, the
Cisco 2600 Series supports connectivity to legacy
asynchronous and X.25 devices as well as
standards-based IP devices, facilitating a graceful
migration from legacy to next generation network
elements. Driven by a powerful RISC processor,
the Cisco 2600 Series provides the extra power
needed to support the advanced quality of service
(QoS), higher bandwidth and security features
required for connecting to today’s Network
Operation Center (NOC) systems.
The Cisco 2600 Series meets service provider’s
critical physical requirements for equipment
depth fitting right alongside transmission
equipment on standard 12 inch deep racks, and
occupying only 1RU in height. Offered in six base
configurations supporting fixed single or dual
local-area network (LAN) ports, each Cisco 2600
also includes one network module slot, two
wide-area network (WAN) interface card slots
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 12
and one advanced integration module (AIM) slot. Rear
access cabling allows easy connectivity; the modular
design shares a large number of modules with the Cisco
3600 Series and permits fast servicing of Field
Replaceable Units (FRUs). DC, AC and redundant AC
power supply adapter modules are also field replaceable.
Network Equipment Building Standards (NEBS) Level 3/
ETSI compliance is achieved when used with the Cisco
2600’s optional NEBs/ETSI kit (note the NEBS kit is
included with the Cisco 2650-DC and Cisco 2651-DC
model). Common Language Equipment Identification
(CLEI) coding is provided for easy identification and
tracking of central-office equipment. Robust network
management capability for the Cisco DCN solution is
achieved by using the CiscoWorks, Cisco View and Cisco
View Stack Management Interface applications.
• Network Consolidation—By integrating the functions
of channel service unit/data service units (CSU/DSUs),
integrated services digital network (ISDN) Network
Termination (NT1) devices, firewalls, modems,
compression or encryption devices, voice/data
gateways and other equipment found in service
provider COs and DCNs into a single, compact unit,
the Cisco 2600 Series provides a space-saving solution.
Figure 1
• Multiservice voice/data integration—The Cisco 2600
Series reinforces the commitment by Cisco to integrate
multiservice voice/data integration capabilities to its
product portfolio, enabling the consolidation of
parallel networks with bandwidth-efficient packet
telephony. Using the Voice/Fax modules, the Cisco
2600 may be deployed in both Voice over IP (VoIP)
and Voice over Frame Relay (VoFR) networks. The
packet voice trunk network module supports up to 60
simultaneous voice calls in a Cisco 2600 as well as
supporting routing and other services. When used
with the ATM-AIM, VoATM using AAL2 or AAL5 can
be deployed.
Cisco 2600 Series Modular Access Routers
• Simplifies network management and training—By
using CiscoWorks and Cisco View, the Cisco 2600 and
Catalyst 1924DC switch can be managed remotely
as a single entity, eliminating the need to telnet or
establish connections to multiple network peripherals
using different management tools. These same tools
also manage the higher performance Catalyst 2924M
XL and the Cisco 3662-AC/DC-CO.
Key Benefits
Cisco 2600 Series Chassis Options
The Cisco 2600 Series lowers network lifecycle costs with
the following benefits:
Every Cisco 2600 has two WAN Interface Card (WIC)
slots, one Network Module slot, and an AIM slot along
with one or two fixed LAN ports, one asynchronous
auxiliary port and one console port.
• Investment protection—Because the Cisco 2600 Series
supports field-upgradable modular components,
network interfaces can easily be changed without a
“forklift upgrade.” Modular interfaces are shared
with the Cisco 1600, 1700, and 3600 Series permitting
scalable re-deployment of modules throughout the
network. The AIM slot of the Cisco 2600 platform
further protects investments by offering the
expandability to support advanced services such as
hardware-assisted data compression,
hardware-assisted data encryption, or ATM data/
voice access.
The Cisco 2600 Series is available in three performance
levels and six base configurations:
• Cisco 2650 and Cisco 2651—up to 37K packets per
second (pps), one and two autosensing 10/100 Mbps
Ethernet ports
• Cisco 2620 and Cisco 2621—up to 25K pps, one and
two autosensing 10/100 Mbps Ethernet ports
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 2 of 12
• Cisco 2610 through Cisco 2613—up to 15K pps
for primary and backup WAN connectivity. Network
modules available for the Cisco 2600 and 3600 Series
support a broad range of applications, including
multiservice voice/data integration, analog and ISDN dial
access, and serial device concentration. The internal Data
Compression AIM for the Cisco 2600 Series off-loads the
task of performing high-speed data compression from
the Cisco 2600’s main CPU, allowing compressed data
throughput of up to 8-Mbps while preserving external
interface slots for other applications.
– Cisco 2613—One Token Ring port
– Cisco 2612—One Ethernet port, one Token
Ring port
– Cisco 2611—Two Ethernet ports
– Cisco 2610—One Ethernet port
AC power supply versions are also available.
The WAN interface cards available for the Cisco 1600,
1720, 2600, and 3600 platforms support a variety of
serial, Integrated Services Digital Network Basic Rate
Interface (ISDN BRI), and integrated CSU/DSU options
Cisco 2600 Series Back Panel View (Cisco 2611 Shown)
Network module slot
WIC slots
SERIAL 0
Cisco 2611
SERIAL 1
SERIAL 1
CONN
WIC
CONN 2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 0
CONN
CONN
W0
W1
LINK ETHERNET 1 ACT
100-240V– 1A
50/60 Hz 47 W
WIC
2T
SEE MANUAL BEFORE INSTALLATION
LINK ETHERNET 0 ACT
Ethernet ports
CONSOLE
AUX
12298
Figure 2
Auxiliary port
Console port
Features and Benefits
The Cisco 2600 Series brings a cost-effective combination of versatility, integration, and power to service providers with the
features listed in Table 1.
Table 1 Features and Benefits of the Cisco 2600 Series
Features
Benefits
Versatility and Investment Protection
Modular Architecture
• Network interfaces are field-upgradable to accommodate future technologies while providing a
solution to meet today’s needs
• Additional interfaces can be added on a “pay-as-you-grow” basis to accommodate network growth
• Wide variety of interfaces and port densities for IP, ATM, Frame and TDM networks to support any
Central Office environment
Broad array of WAN
Interface Cards and
Network Modules Shared
with Cisco 1600, 1700, and
3600 Series Modular
Access Platforms
• Reduces cost of maintaining inventory of Cisco 1600, 1700, 2600, and 3600 Series modular
components
• Lower training costs for support personnel
Advanced Integration
Module Slot
• Expandability for integration of advanced high performance services such as hardware-assisted data
compression, encryption, and ATM access.
• Maximizes performance by off-loading processor intensive applications to a coprocessor.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 3 of 12
Table 1 Features and Benefits of the Cisco 2600 Series (Continued)
Features
Benefits
Choice of LAN
Configurations
• Meets specific Telco DCN and CO Local Area Network requirements including single and dual LAN
connections for auto-sensing 10/100Mbps Ethernet, Token Ring, mixed Ethernet and Token Ring
environments
DC and AC Power Supply
Options
• Allows deployment in DC power environments such as telecommunications carrier central offices or
as a managed Customer Premise Equipment (CPE) platform with an AC power supply
Service Provider/Carrier DCN-Class Performance
High-Performance
Architecture
• RISC processor based to support high-speed routing performance of up to 37,000 packets per
second for maximum scalability to support more concurrent functions (Cisco 2650 and Cisco 2651)
per second for maximum scalability
• Support for advanced QoS features such as the Resource Reservation Protocol (RSVP), Weighted
Fair Queuing (WFQ), and IP Precedence to reduce recurring WAN costs
• Support for up to 8 T1/E1 network connections
• Up to 36 asynchronous or 12 synchronous connections are supported in a single Cisco 2600
enabling telemetry applications
• Support for TDM traffic with drop and insert capability
• AIM slot support to off-load processor intensive applications including hardware-based
compression, encryption, and ATM access.
• Enables security features such as data encryption, tunneling, and user authentication and
authorization for virtual private network (VPN) access
• Full Cisco IOS® Software Support
Deployed in IP networks
around the world, the Cisco
IOS software supports the
following DCN related
services:
• Full IP Routing Services including multiprotocol BGP, multi-Area ISIS and DNS
• TL1 support including transport via X.25, TCP or OSI. TID Address Resolution Protocol (TARP)
support and TARP Storm Avoidance support.
• PPP services including WAN interface support for ISDN, Frame Relay, ATM, and X.25
• X.25 support services including X.25 switching, X.3 Asynchronous PAD, DNS for X.25 address
resolution, Hunt Groups, and SVC/PVC conversion
• IP to X.25 Protocol Translation
• BX.25 Transport over X.25 or TCP (XOT)
• Support for up to 3 OSI/IS-IS areas, per chassis, essentially providing the same capabilities as 3
separate OSI routers.
• Full-featured IP and OSI routing and mediation on a single platform, including legacy X.25, and async
devices support ICSA-certified Cisco IOS Firewall feature sets provide support for advanced security
features such as Context-Based Access Control (CBAC), Java blocking, denial of service protection,
and audit trails
• Integration of legacy networks via data link switching plus (DLSW+) and Advanced Peer-to-Peer
Networking (APPN)
Simplified Management
Common Language
Equipment Identification
(CLEI) Codes
• Enables easy identification and tracking of central-office equipment
Part of the Cisco DCN
Stackable Solutions
• Can be stacked with LAN switches such as the Catalyst 1924DC or Cisco 3662-AC/DC-CO modular
access platform
VLAN Support
• Enables inter-VLAN routing via the Cisco Inter-Switch Link (ISL) protocol with the Cisco Catalyst
1924DC and 2924M XL DC switches and the Cisco 3662-AC/DC-CO when used with the Cisco 2620
and 2621 and Cisco IOS “Plus” feature set
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 4 of 12
Table 1 Features and Benefits of the Cisco 2600 Series (Continued)
Features
Benefits
Cisco Discovery Protocol
(CDP) Support
• Enables a CiscoWorks network management station to automatically discover the Cisco 2600 in a
network topology.
Integrated CSU/DSU,
Analog Modem and NT1
Options
• Enables remote management of all CPE elements for higher network availability and lower
operational costs
Support for Cisco Works
and CiscoView
• Allows simplified management of all integrated and stackable components
Support for Cisco Voice
Manager (CVM)
• Reduces the cost of deploying and managing integrated voice/data solutions
Enhanced Setup Feature
• Context-sensitive questions guide the user through the router configuration process, allowing faster
deployment
Support for Cisco
AutoInstall
• Configures remote routers automatically across a WAN connection to save cost of sending technical
staff to the remote site
Cisco Configuration
Express Support
• Enables quick and cost-effective deployment of large installations by ordering custom-configured
platforms from Cisco
Reliability
Dial-on-Demand Routing
• Allows automatic backup of WAN connection in case of a primary link failure
Dual Bank Flash Memory
• Backup copy of the Cisco IOS software can be stored in Flash memory
Redundant AC Power
Supply Option
• AC RPS option can be shared with other network components such as the Cisco Catalyst 1924
Series to protect CPE network from downtime due to power failures
Ergonomic Design
LED Status Indicators
• Provide at-a-glance indications for power, RPS status, network activity, and interface status
All Network Interfaces
Located on Back of Unit
• Simplifies installation and cable management for maximum uptime
Easy-to-Open Chassis
Design
• Allows fast and easy access for installation of memory or AIM
Multispeed Fan
• Enables quiet operation in CPE environments
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 5 of 12
Cisco IOS Software
Modeled after the Cisco 2500 and 3600, the Cisco 2600
Series supports a full range of Cisco Internetworking
Operating System, (IOS) features. These feature sets
include a wide variety of intranet, multiprotocol, QoS,
and legacy IBM applications in use today. The Cisco 2600
Series offers several base protocol feature sets and a
combination of premium feature options including the
Plus, encryption and firewall feature sets.
The available IOS feature sets are:
• IP
• IP/IPX/AppleTalk/DEC
• Remote Access Services
• Enterprise
• Enterprise APPN
• Telco
The Base feature sets support popular protocols and
standards such as network address translation (NAT),
open shortest path first (OSPF), Border Gateway Protocol
(BGP), Remote Access Dial-In User Service (RADIUS),
IP Multicast, remote monitoring (RMON), and WAN
optimization features (such as Bandwidth on Demand;
Custom, Priority and WFQ, Dial Back-up and RSVP).
Some base feature sets are offered in combination with
premium capabilities found in the Plus, Firewall and
Encryption feature sets. The Plus feature sets contain
additional value-added features such as, L2TP, L2F, Voice/
Data integration, legacy mainframe protocols, DLSw,
Asynchronous Transfer Mode (ATM), virtual LANs
(VLANs), Netflow, etc. Additional premium security
oriented features include IPSec, and 3DES encryption
as well as ICSA certified Firewall capabilities.
The Enterprise Plus feature set is the Cisco comprehensive
offering of protocols, standards, and value-add
networking capabilities. This feature set includes a broad
array of QoS, LAN and WAN protocols including legacy
mainframe protocols, protocol translation, remote node
and terminal services. Additionally, the Enterprise Plus
feature set includes a number of telco-oriented features,
such as OSI and X.25 Pad, IP/X.25 protocol translation,
request for comment (RFC) 1613-XOT, TL1 transport
and TARP Storm Avoidance.
The Remote Access Services feature set includes various
management, multicast, security (excluding encryption),
protocol translation, remote node and terminal services
and some LAN and WAN service and optimization
protocols but excludes some of the capabilities found in
the Enterprise Plus feature set.
A more detailed list of features can be found in the
Cisco 2600 IOS release notes. The memory requirements
for a given feature set can be found in the Cisco 2600
software features and memory requirements product
bulletin. Note: Cisco 2600 Series modular access routers
ship with 32MB of DRAM memory and 8MB of Flash
memory as the default configuration. Some Cisco IOS
feature sets require additional memory.
Technical Specifications
• Main Processor: 80 MHz RISC (Cisco 265x); 50 MHz
RISC (Cisco 262x); 40 MHz RISC (Cisco 261x)
• Flash Memory: 8 to 16MB (Cisco 261x); 8 to 32MB
(Cisco 262x1 and Cisco 265x only)
• System Memory (DRAM): 32 to 64MB (Cisco 261x
and Cisco 262x); 32 to 128MB (Cisco 265x only, uses
SDRAM)
• WAN Interface Card Slots: 2
The Cisco IOS® Telco feature set is a specialized image for
service providers. This optimized Cisco IOS image
supports IP, X.25/PAD, X.25/IP protocol translations,
and all OSI routing and protocol translation features.
This image offers the service provider the critical
network-management features required to manage a
diverse network topology. The Cisco IOS Telco image
enhances memory utilization by stripping away
underutilized features such as Appletalk and Banion
Vines. This Cisco IOS image is specific to the Cisco DCN
environment, and is not available with Cisco IOS 12.2.2T.
• Network Module Slot: 1
• AIM Slot: 1
• Console/Aux Speed: 115.2-Kbps (maximum)
• Width: 17.5 in. (445 mm)
• Height: 1.69 in. (43 mm)
• Depth: 11.8 in. (300 mm)
1. Support for 32MB Flash requires Cisco IOS 12.1(3)T or later.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 6 of 12
• Weight (min): 8.85 lb (4.02 kg)
• Weight (max): 10.25 lb (4.66 kg)
• Power Dissipation: 72W (maximum)
• AC Input Voltage: 100 to 240 VAC
• Frequency: 47 to 64 Hz
compact, high-density Smart Serial connector to support
a wide variety of electrical interfaces when used with the
appropriate transition cable.
Figure 3
Dual-Port High-Speed Serial WIC (up to 2 Mbps/
Port)
Serial ports
• AC Input Current: 1.5 amps
• DC Input Voltage: -38V to -60V (UL label)
• DC Input Current: 2 amps
SERIAL 0
CONN
• Operating Temperature: 32 to 104 F (0 to 40 C)
CONN
SEE MANUAL BEFORE INSTALLATION
• Non-operating Temperature: -13 to 158 F
(-25 to 70 C)
CONN LEDs
• Relative Humidity: 5 to 95% non-condensing
Figure 4
• Noise Level (min): 38-dbA
Port)
Dual-Port Async/Sync Serial WIC (up to 128 Kbps/
Serial ports
• Noise Level (max): 42-dbA
NEBS Compliance
Regulatory Compliance
The Cisco 2600-DC module access platform conforms to
a number of safety, EMI, immunity and network
homologation standards. Details of the regulatory
specifications are included at http://www.cisco.com/
kobayashi/Support_root.shtml.
Year 2000 Compliance
For detailed Year 2000 compliance information on the
Cisco 2600 Series, reference Cisco’s Year 2000
Compliance Web site at http://www.cisco.com/warp/
customer/752/2000/.
SERIAL 1
SERIAL 0
CONN
WIC
CONN 2A/S
SEE MANUAL BEFORE INSTALLATION
H11497
The optional NEBS Level 3/ETSI kit ensures a Cisco 2600
modular access platform meets NEBS Level 3/ETSI
standards for networking equipment usually found in the
central office. This kit is available for the Cisco 261x and
Cisco 262x Series as a spare (ACS-2600NEBS/ETSI=).
This kit also includes the 23/24 inch rack mount kit for
Hendry Bays. This kit is included with the Cisco 265x-DC
Series.
WIC
2T
H11496
SERIAL 1
CONN LEDs
Table 2 WAN Interface Cards and Voice Interface Cards for
Cisco 2600 Series
Part Number
Description
WIC-1DSU-T1
T1/Fractional T1 CSU/DSU (requires IOS
software version 11.3(4)T or later)
WIC-1DSU-56K4
One-port four-wire 56/64-kbps CSU/DSU
WIC-1T
One-port high-speed serial
WIC-2T
Dual high-speed serial
WIC-2A/S
Two-port async/sync serial
WIC-1B-S/T
One-port ISDN BRI
WIC-1B-U
One-port ISDN BRI with NT
WAN Interface Card Options
Network Module Options
The Cisco 2600 Series supports all WAN Interface Cards
available for the Cisco 1600, 1700 and 3600 Series, as
well as two new dual-port serial WAN interface cards to
maximize interface density and slot efficiency. The new
dual-serial port WAN interface cards feature Cisco’s new,
The Cisco 2600 Series supports the Network Modules
listed in Table 3; these modules are shared with the Cisco
3600 Series.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 7 of 12
Table 3 Network Modules for Cisco 2600 Series
Module
Description
ATM WAN Network Modules for Cisco 2600 Series (Requires IOS Software Release 12.0(5) or Later)
NM-4T1-ATM1
Four-port T1 ATM with Inverse Multiplexing over ATM (IMA) network module
NM-8T1-ATM1
Eight-port T1 ATM with IMA network module
NM-4E1-ATM1
Four-port E1 ATM with IMA network module
NM-8E1-ATM1
Eight-port E1 ATM with IMA network module
NM-1A-T31
One-port DS-3 (44Mbps) ATM network module (requires Cisco IOS version 12.1(2)T or later)
NM-1A-E31
One-port E-3 ATM network module (requires Cisco IOS version 12.1(2)T or later)
NM-1A-OC3SML-1V1,4
NM-1A-OC3SMI-1V1,4
NM-1A-OC3MM-1V1,4
One-port single mode long (SML) reach OC-3 ATM with Circuit Emulation Services (AAL-1) network
module, single mode intermediate (SMI) reach, and mulitmode (MM) (requires Cisco IOS version
12.1(2)T or later). OC3 MODULES ARE ONLY SUPPORTED ON THE CISCO 2650 AND CISCO 2651.
Serial Network Modules for Cisco 2600 Series (Requires IOS Software Release 11.3(2) or Later)
NM-16A
16-port high density async network module
NM-32A
32-port high density async network module
NM-4A/S
Four-port low speed (128 Kbps max) async/sync serial network module
NM-8A/S
Eight-port low speed (128 Kbps max) async/sync serial network module
NM-2W
Two-WAN interface card slot network module (WAN interface cards offered separately)
LAN Network Modules for Cisco 2600 Series (Requires IOS Software Release 11.3(4)T or Later)
NM-1E
One-port Ethernet network module
NM-4E
Four-port Ethernet network module
NM-1ATM-251
One-port ATM 25Mbps network module
Dial, ISDN and Channelized Serial Network Modules for Cisco 2600 Series (Requires IOS Software Release 11.3(4)T
or Later)
NM-1CT1
One-port channelized T1/ISDN PRI network module
NM-1CT1-CSU
One-port channelized T1/ISDN PRI with CSU/DSU network module
NM-2CT1
Two-port channelized T1/ISDN PRI network module
NM-2CT1-CSU
Two-port channelized T1/ISDN PRI with CSU/DSU network module
NM-1CE1B
One-port channelized E1/ISDN PRI balanced network module
NM-1CE1U
One-port channelized E1/ISDN PRI unbalanced network module
NM-2CE1B
Two-port channelized E1/ISDN PRI balanced network module
NM-2CE1U
Two-port channelized E1/ISDN PRI unbalanced network module
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 8 of 12
Table 3 Network Modules for Cisco 2600 Series (Continued)
Module
Description
NM-4B-S/T
Four-port ISDN BRI network module (S/T interface)
NM-4B-U
Four-port ISDN BRI with NT-1 network module (U interface)
NM-8B-S/T
Eight-port ISDN BRI network module (S/T interface)
NM-8B-U
Eight-port ISDN BRI with NT-1 network module (U interface)
Modem Modules and License (Requires IOS Software Release 11.3(4)T or later)
NM-8AM
Eight analog modem network module
NM-16AM
Sixteen analog modem network module
MMTL-3600/2600-8
Modem Management Technology License, eight modems
MMTL-3600/2600-16
Modem Management Technology License, 16 modems
Voice/Fax Network Modules for Cisco 2600 Series (Requires IOS Release 11.3(2) or Later)
NM-1V1
One-slot voice/fax network module (up to 2 voice channels)
NM-2V1
Two-slot voice/fax network module (up to 4 voice channels)
NM-HDV-1T1-24=1,2
Twenty-four-channel T1 high density voice/fax network module
NM-HDV-1E1-30=1,3
Thirty-channel E1 high density voice/fax network module
NM-HDV-1T1-24E=1,2
Twenty-four-channel T1 enhanced high density voice/fax network module
NM-HDV-1E1-30E=1,3
Thirty-channel enhanced E1 high density voice/fax network module
NM-HDV-2T1-481,2
Forty-eight-channel T1 high density voice/fax network module
NM-HDV-2E1-601,3
Sixty-channel E1 high density voice/fax network module
NM-HDV=1,2
High-density voice module, spare (no T1 or DSPs)
1. All ATM and Packet Voice network modules require a Cisco IOS Plus feature set.
2. Requires Cisco IOS Version 12.05XK or later.
3. Requires Cisco IOS Version 12.07XK or later.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 9 of 12
Table 4 Voice Interface Cards for Use with the Voice/Fax Network Modules
Module
Description
VIC-2FXS
Two-port FXS voice/fax interface card for voice/fax network module
VIC-2FXO-M11
Two-port FXO voice/fax interface card for voice/fax network module with Caller ID and supervisory
disconnect (North American version and other countries)
VIC-2FXO
Two-port FXO voice/fax interface card for voice/fax network module
VIC-2FXO-EU
Two-port FXO voice/fax interface card for Europe
VIC-2FXO-M3
Two-port FXO voice/fax interface card for Australia
VIC-2E/M
Two-port E&M voice/fax interface card for voice/fax network module
VIC-2BRI-NT/TE-TE2
Two-port BRI NT/TE VIC interface providing configurable phantom –48VDC power, delivering 4
bearer channels of voice
VIC-2BRI-S/T-TE3
Two-port BRI S/T terminal equipment voice/fax interface card for voice/fax network module
1. Supported with Cisco IOS 12.1(2)XH or later.
2. Supported starting with Cisco IOS Plus 12.1(3)XI.
3. Supported on the Cisco 261x with Cisco IOS 12.0(2)XD and Cisco 262x on 12.0(3)T or later.
Table 5 Cisco 2600 Series Supported Multiflex Voice/WAN Interface Cards for Use with Voice/Fax Network Module and as a
Standalone WAN Interface Card
Module
Description
VWIC-1MFT-T11
One-port T1/Fractional T1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-T11
Dual-port T1/Fractional T1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-T1-DI1
Dual-port T1/Fractional T1 Multiflex Trunk with CSU/DSU and Drop & Insert
VWIC-1MFT-E11
One-port E1/Fractional E1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-E11
Dual-port E1/Fractional E1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-E1-DI1
Dual-port E1/Fractional E1 Multiflex Trunk with CSU/DSU and Drop & Insert
1. Supported on the Cisco IOS version 12.0(5)XK or later. IOS version 12.07T required to support both the Multiflex Voice/WAN interface card and the ATM IMA
network modules in the same Cisco 2600 chassis.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 10 of 12
Alarm Interface Controller Network Module
The Alarm Interface Controller (AIC) is a network
module that greatly expands the network monitoring and
control capabilities of the Cisco 2600 and 3600 Series
routers. The AIC functions as an integrated entity residing
within the Cisco 2600 Router to provide network alarm
monitoring and remote control of network elements. The
AIC reduces service provider and enterprise operating
expenses by facilitating a “single box” solution, doing
away with the need for a dedicated external alarm
monitoring device. This greatly simplifies network
layout, monitoring, and control resulting in lower
operations, administration, maintenance, and provisioning
(OAM&P) costs. The AIC is supported in Cisco IOS®
12.2(2)XG and 12.2(8)T. The AIC network module
supports 64 discrete alarm monitoring points, of which 8
of the last 64 alarm points are software- configurable to
accept either analog or discrete inputs. The AIC further
supports 16 control relays to facilitate the remote control
of network elements.
Table 6 Alarm Interface Controller Network Module
Module
Description
Cisco IOS Version
NM-AIC-64
Alarm monitoring and control network
module; 64 monitoring points and 16 control
points
12.2(2)XG and 12.2(8)T
Advanced Integration Module Options
The Cisco 2600 Series offers data compression or data
encryption through the use of an internal AIM slot. This
offers the advantage of allowing external slots to remain
available for components such as integrated CSU/DSUs,
analog modems, or Voice/Fax Network Modules, while
offering greater performance for services, applications and
bandwidth management.
The Data Compression AIM provides a cost-effective
option for reducing recurring WAN costs and maximizes
the benefit of the advanced bandwidth management
features of the Cisco IOS software. With compression
ratios of up to 4:1, the Data Compression AIM supports
8Mbps of compressed data throughput without imposing
additional traffic latency—enough to keep two T1 or E1
circuits full of compressed data in both directions
simultaneously. The Data Compression AIM supports
industry standard LZS and Microsoft Point-to-Point
Compression (MPPC) algorithms and ensures
compatibility with all Cisco products supporting
hardware- or software-based compression.
The Data Encryption AIM offloads encryption processing
from the Cisco 2600 Series CPU, providing 10 times
the performance over software-only encryption. The
AIM-VPN/BP supports a maximum number of 300 remote
access tunnels, while the new AIM-VPN/EP provides
support for a maximum number of 800 remote access
tunnels. The AIM-VPN/EP is designed to take advantage
of the performance power of the Cisco 265x Series and is
recommended with this series only.
The new AIM-ATM module provides a
high-performance hardware-based ATM access solution
for one to four T1 orE1 connections supported by the T1
or E1 VWICs (for example, VWIC-IMFT-T1). This frees
the network moduleslot to support other functions. When
used in combination with a high density voice network
module (NM-HDV-xxx), the ATM AIM supports ATM
adaption Layer (AAL) 2 and AAL5 VoATM.
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 11 of 12
Cisco Service and Support
Table 7 Table 6 Advanced Integration Module for the Cisco
2600 Series
AIM-COMPR2
Data Compression AIM for the Cisco 2600
Series (requires IOS software release
12.0(2)T or later)
AIM-VPN/BP
Data Encryption AIM for the Cisco 2600
Series (requires IOS software release
12.1(3)XI or later)
AIM-VPN/EP1
AIM-ATM
DES/3DES VPN Encryption Module for the
Cisco 2600—Enhanced Performance
(requires IOS software release 12.2(2)T
or later
High Performance ATM-AIM (requires
Cisco IOS software release 12.2(2)XA,
12.2(4)T, or later
Leading-edge technology deserves leading-edge support.
Service and support for the Cisco 2600 Series is available
on a one-time or annual contract basis. Support options
range from help desk assistance to proactive, onsite
consultation.
All support contracts include:
• Major Cisco IOS software updates in protocol,
security, bandwidth, and feature improvements
• Full access rights to Cisco Connection Online (COO)
for technical assistance, electronic commerce, and
product
• information
• 24-hour-a-day access to the industry’s largest
dedicated technical support staff
1. Recommended with the Cisco 265x only.
A support contract maximizes the value of your
technology investment throughout its lifecycle, ensuring
optimum performance and availability. Augment your
internal staff’s capabilities by leveraging the Cisco
expertise.
Contact your local sales office for further information.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
European Headquarters
Cisco Systems Europe
11, Rue Camille Desmoulins
92782 Issy-les-Moulineaux
Cedex 9
France
www.cisco.com
Tel: 33 1 58 04 60 00
Fax: 33 1 58 04 61 00
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-7660
Fax: 408 527-0883
Asia Pacific Headquarters
Cisco Systems Australia, Pty., Ltd
Level 9, 80 Pacific Highway
P.O. Box 469
North Sydney
NSW 2060 Australia
www.cisco.com
Tel: +61 2 8448 7100
Fax: +61 2 9957 4350
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
Cisco.com Web site at www.cisco.com/go/offices.
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia
Republic
Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland
Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland •
Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain •
• Czech
• Israel
Portugal
Sweden
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. Printed in the USA. Catalyst, Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems
logo are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other
company. (0106R)
07/01 BW7440