Small Cubic Type
VGA CCD
Monochrome PoCL Camera Link Camera
FV-L030B1
Product Specifications
RICOH COMPANY, LTD.
FV-L030B1
Product Specifications Rev. 1.01
1/11
Copyright & Disclaimer
Sensor Technology Co., Ltd. (DBA Sentech) believes the contents and specifications of its website, catalog,
documentation and ads are correct; however, Sentech provides no representation or warranty regarding such
information or product(s) contained therein. It is requested that Sentech be given appropriate acknowledgement in any
subsequent use of such work by a third party.
While every effort has been made to ensure that the details contained in Sentech’s website and all documentation are
correct and up-to-date, Sentech assumes no liability, legal or otherwise for any errors in listings, specifications, part
numbers, process, software or model applications. Sentech reserves the right to change specifications, product
descriptions, product quality, pricing and application at any time without prior written or oral notice. Any party using
such information assumes all risk for any and all damaged caused to themselves, a third party and/or property by
virtue of incorrect information and/or failure of these products. By installing and/or using a Sentech software
development kit or other similar product and/or information obtained from Sentech’s website, catalog, documentation
or ads, you hereby accept and understand these stated terms and conditions.
FV-L030B1
Product Specifications Rev. 1.01
2/11
Table of Contents
1.
Safety / Product Precautions ............................................................................................................................... 4
2.
Electronic / Mechanical / Environmental Specifications................................................................................... 6
2.1
3.
Connector Specifications..................................................................................................................................... 8
3.1
3.2
4.
Spectral Sensitivity Characteristics..................................................................................................................... 7
Camera Link Connector...................................................................................................................................... 8
Power-I/O Connector .......................................................................................................................................... 9
Dimensions.......................................................................................................................................................... 10
FV-L030B1
Product Specifications Rev. 1.01
3/11
1. Safety / Product Precautions
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
For U.S.A.
!
CAUTION:
TO REDUCE TH E RISK OF EL ECTRIC SHOCK, DO N OT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warning:
This equipment generates and uses radio frequency energy and if
not installed and used properly, I.e., in strict accordance with the
instruction manual, may cause harmful interference to radio
communications. It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.
For Canada
The li ghtning flash with arrowhea d
symbol, within an equilateral triangle,
i s i nt ended t o alert the use r t o the
pre sence of uni nsulated “dangerous
v o l ta g e ” w i th in t h e p r o du c t ’ s
enclosure t hat may be of suffici ent
ma gnitude t o c onst i tute a ri sk of
electric shock to persons.
Warning:
The exclama ti on point wi t hi n a n
equilateral triangle is intended to alert
the user to the presence of import ant
operating and maintenance (servicing)
i n st r u c ti o ns in t h e l i te r a t u r e
accompanying the appliance.
WARNING:
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Product Precautions
Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper
handling or storage could damage the camera.
Do not pull or damage the camera cable.
During camera use, do not wrap the unit in any material. This will cause the internal temperature of
the unit to increase.
Do not expose the camera to moisture, or do not try to operate it in wet areas.
Do not operate the camera beyond its temperature, humidity and power source ratings.
While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or
contamination from getting in the CCD or filter area and scratching or damaging this area.
Do not keep the camera under the following conditions:
In wet, moist, and high humidity areas
• Under hot direct sunlight
• In high temperature areas
• Near an object that releases a strong magnetic or electric field
• Areas with strong vibrations
Apply the power that satisfies the requirements specified in this document to the camera.
Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. DO
not scratch the surface of the glass.
FV-L030B1
Product Specifications Rev. 1.01
4/11
The camera is a general-purpose electronic device; using the camera for the equipment that may
threaten human life or cause dangers to human bodies directly in case of failure or malfunction of
the camera is not guaranteed. Use the camera for special purposes at your own risk.
FV-L030B1
Product Specifications Rev. 1.01
5/11
2. Electronic / Mechanical / Environmental Specifications
Product
Electronic
Specifications
FV-L030B1
Imager
1/3” Interline VGA Monochrome Progressive CCD: ICX424AL
Total Picture Elements
Active Picture Elements
Cell Size
692 (H) x 504 (V)
VGA: 648 (H) x 494 (V)
7.4 (H) x 7.4 (V) µm
Scanning System
Progressive
Full Scanning, Partial Full Scanning,
½ Partial Scanning, ¼ Partial Scanning,
Scanning Mode
Variable Partial Scanning, Binning, Binning Partial Scanning, Binning ½ Partial
Scanning, Binning ¼ Partial Scanning, Binning Variable Partial Scanning
Vertical Frequency
(Frame Rate)
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz
in partial full scanning (default scanning mode)
Horizontal Frequency
15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Pixel Frequency
12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
S/N Ratio (Standard Deviation
@ 8bit output)
Minimum Scene Illumination
Sync. System
<= 3 Digit (Gain 0 dB)
0.4 Lux at F1.2
Internal
Video Output Format
Tap Configuration
Digital 8, 10, or 12 bit Camera Link (Base Configuration)
1 Tap (1X-1Y)
OFF, 1/3 to 1/40,000 sec. (Variable at every H and clock)(30fps)
Exposure Time
OFF, 1/7 to 1/80,000 sec. (Variable at every H and clock)(60fps)
OFF, 1/11 to 1/120,000 sec. (Variable at every H and clock)(90fps)
Gain
0 to 27 dB
Gamma
1.0
Smear Reduction
Power Supply
Selectable ON/OFF via the communication
Input Voltage
DC 12V± 10% via Camera Link connector
Consumption
Less than 2.7W
Operational Mode
Communication
Free-run; Edge Preset Trigger (V-reset, Non-reset);
Pulse Width Trigger (V-reset, Non-reset)
RS232 via Camera Link connector
Mechanical
Dimensions
28 (W) x 28 (H) x 40 (D) mm (NOT including the connector)
Specifications
Optical Filter
No IR cut filter
Materials
Aluminum (AC)
Lens Mount
C mount
Interface Connector
I/O Connector: HR 10A-7R-6PB (Hirose) or equivalent
Camera Link Connector: SDR (3M) or equivalent
Tripod can be attached to 4 plates
Tripod
(four M4 screws on the bottom plate, two M4 screws on the other 3 plates)
Weight
Environmental
Specifications
Approximately 43 g
Operational
Temperature
FV-L030B1
Product Specifications Rev. 1.01
Temperature: -5 to 50⁰C
6/11
Storage
Temperature: -30 to 65⁰C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle); Acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011 (Class B), FCC PART15 subpart B classA
RoHS
2.1
RoHS Compliant
Spectral Sensitivity Characteristics
1
Relative Response
0.8
0.6
0.4
0.2
0
400
500
FV-L030B1
Product Specifications Rev. 1.01
600
700
Wave length [nm]
800
900
1000
7/11
3. Connector Specifications
Power-I/O Connector
Camera Link Connector
3.1
Camera Link Connector
SDR (3M) or equivalent
This product is a PoCL type.
When a frame grabber is PoCL compliant, DO NOT SUPPLY POWER FROM THE I/O CONNECTOR.
When a frame grabber is NOT PoCL compliant, supply power from the I/O connector.
Pin Assignment
Pin No.
Signal Name
Pin No.
Signal Name
1
+12V
14
GND
2
X0-
15
X0+
3
X1-
16
X1+
4
X2-
17
X2+
5
Xclk-
18
Xclk+
6
X3-
19
X3+
7
SerTC+
20
SerTC-
8
SerTFG-
21
SerTFG+
9
CC1-(TRG)
22
CC1+(TRG)
10
CC2+
23
CC2-
11
CC3-
24
CC3+
12
CC4+
25
CC4-
13
GND
26
+12V
FV-L030B1
Product Specifications Rev. 1.01
8/11
3.2
Power-I/O Connector
HR10A-7R-6PB(Hirose)or equivalent
This connector is for the power supply (12Vdc) and input /output signals.
Use HR10A-7P-6S (Hirose) or equivalent for the cable side.
Pin Assignment
Pin No.
Signal Name
IN / OUT
1
GND
IN
2
I/O-1
IN/OUT
3
I/O-2
IN/OUT
4
I/O-3
Voltage
Low Voltage
High Voltage
0V
IN/OUT
5
I/O-4
IN/OUT
6
+12Vdc
IN
IN
0 to +0.5
+2.5 to +5.0V
OUT
0V
+3.3V
IN
0 to +0.5
+2.5 to +5.0V
OUT
0V
+3.3V
IN
0 to +0.5
+2.5 to +5.0V
OUT
0V
+3.3V
IN
0 to +0.5
+2.5 to +5.0V
OUT
0V
+3.3V
+12Vdc
Input/output signals can be assigned through the camera setting communication (see table 4).
Trigger input signal can be assigned either on Camera Link connector (CC1) or on the No. 2 pin of the IO
connector through the camera setting communication.
IO Signal Patterns
Command No.
F0H[3..0]
11H[7]
0
Option 0
(Initial Setting)
0H
(initial setting)
1
HR10A-7R-6PB (Hirose)
No.2 Pin
No.3 Pin
No.4 Pin
No.5 Pin
I/O-1 (SP4)
I/O-2 (SP3)
I/O-3 (SP2)
I/O-4 (SP1)
IN/TRG
IN/-
IN/-
IN/TRG
OUT/VD
OUT/HD
OUT/
STROBE
OUT/
STROBE
Option 1
1H
-
Option 2
2H
-
OUT/CC4
OUT/CC3
OUT/CC2
OUT/CC1
Option 3
3H
-
OUT/FVAL
OUT/XSG
OUT/XSUB
OUT/CC1
Option 4
4H
-
OUT/FVAL
OUT/LVAL
OUT/DVAL
OUT/XHD
OUT/EXPDUR
(high-active)
(Exposure)
OUT/VD
N/A
Option 5
5H
-
Option 6
6H
-
Others
7H-FH
-
FV-L030B1
Product Specifications Rev. 1.01
For Test Use Only
OUT/PIC_D9
(MSB)
OUT/TRG
OUT/CC1
N/A
OUT/HD
For Test Use Only
9/11
4. Dimensions
Unit: mm
FV-L030B1
Product Specifications Rev. 1.01
10/11
Revision History
Rev
Date
1.00
1.01
2012/06/15
2012/07/12
Changes
Note
Initial Release
Updated
Document Title
Electronic Specifications
Shutter Speed Exposure Time
Added Smear Reduction
Deleted F1H command due to test use only
RICOH COMPANY, LTD.
URL http://www.ricoh.com/fa_security/
FV-L030B1
Product Specifications Rev. 1.01
11/11