HP PSC 2350 series all-in-one
User Guide
HP PSC 2350 series all-in-one
User Guide
© Copyright 2004 Hewlett-Packard
Development Company, L.P.
The information contained herein is
subject to change without notice.
Reproduction, adaptation or translation
without prior written permission is
prohibited, except as allowed under
copyright laws.
It is not lawful in many places to make
copies of the following items. When in
doubt, check with a legal
representative first.
●
Adobe and the Acrobat logo are either
registered trademarks or trademarks of
Adobe Systems Incorporated in the
United States and/or other countries.
Portions Copyright © 1989-2004
Palomar Software Inc.
The HP PSC 2350 series all-in-one
includes printer driver technology
licensed from Palomar Software, Inc.
www.palomar.com.
Energy Star® and Energy Star logo®
are US registered marks of the United
States Environmental Protection
Agency.
Governmental stamps:
Food stamps
●
●
●
Checks or drafts drawn on
Governmental agencies
Paper currency, traveler’s
checks, or money orders
Certificates of deposit
Copyrighted works
Safety information
Warning To prevent fire or
shock hazard, do not expose
this product to rain or any type
of moisture.
Windows®, Windows NT®, Windows
Me®, Windows XP®, and Windows
2000® are U.S. registered trademarks
of Microsoft Corporation.
Intel® and Pentium® are registered
trademarks of Intel Corporation.
Passports
Immigration papers
Selective service papers
Identification badges,
cards, or insignias
Postage stamps
●
Always follow basic safety precautions
when using this product to reduce risk
of injury from fire or electric shock.
Warning
hazard
Potential shock
Publication number: Q5786-90177
Second edition
1
Notice
2
The only warranties for HP products
and services are set forth in the
express warranty statements
accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for
technical or editorial errors or
omissions contained herein.
The Hewlett-Packard Company shall
not be liable for incidental or
consequential damages in connection
with, or arising out of the furnishing,
performance, or use of this document
and the program material which it
describes.
Note: Regulatory information can be
found in the technical information
chapter of this guide.
3
4
5
6
7
9
Governmental paper or
documents:
–
–
–
–
●
8
Read and understand all
instructions in the setup poster.
Use only a grounded electrical
outlet when connecting the
device to a power source. If you
do not know whether the outlet is
grounded, check with a qualified
electrician.
Observe all warnings and
instructions marked on the
product.
Unplug this product from wall
outlets before cleaning.
Do not install or use this product
near water or when you are wet.
Install the product securely on a
stable surface.
Install the product in a protected
location where no one can step
on or trip over the line cord, and
where the line cord will not be
damaged.
10
If the product does not operate
normally, see the online
Troubleshooting help.
No operator-serviceable parts
inside. Refer servicing to
qualified service personnel.
Use in a well-ventilated area.
Warning This equipment
will be inoperable when main
power fails.
Contents
1
2
3
4
5
6
7
User Guide
HP all-in-one overview.........................................................................................5
The HP all-in-one at a glance.................................................................................5
Control panel overview...........................................................................................6
Use the HP Image Zone to do more with your HP all-in-one................................11
Find more information........................................................................................ 17
Connection information.....................................................................................19
Supported connection types.................................................................................19
Connect using a USB cable..................................................................................19
Use Windows printer sharing................................................................................20
Use printer sharing (Macintosh OS X)..................................................................20
Set up the HP JetDirect 175x...............................................................................20
Use Webscan.......................................................................................................22
Work with photos...............................................................................................23
Transfer photos....................................................................................................23
Edit photos............................................................................................................24
Share photos........................................................................................................26
Print photos..........................................................................................................26
Load originals and load paper...........................................................................29
Load an original....................................................................................................29
Choose papers for printing and copying...............................................................30
Load paper...........................................................................................................31
Avoid paper jams..................................................................................................35
Use a memory card or PictBridge camera........................................................37
The memory card slots and camera port..............................................................37
Transfer photos to your computer.........................................................................38
Print photos from a proof sheet............................................................................39
Set photo print options..........................................................................................41
Use the edit features............................................................................................44
Print photos directly from a memory card.............................................................44
Print photos from a PictBridge-compatible digital camera....................................46
Print the current photo..........................................................................................46
Print a DPOF file...................................................................................................46
Use the slide show feature...................................................................................47
Share photos through HP Instant Share...............................................................48
Use the HP Image Zone.......................................................................................48
Use the copy features........................................................................................49
Set the copy paper size........................................................................................49
Set the copy paper type........................................................................................50
Increase copy speed or quality.............................................................................51
Change default copy settings...............................................................................52
Make multiple copies of the same original............................................................52
Copy a two-page black-and-white document........................................................52
Make a 10 by 15 cm (4 by 6 inch) borderless copy of a photo..............................53
Copy a 10 by 15 cm (4 by 6 inch) photo onto a full-size page..............................54
Copy a photo several times on one page.............................................................55
1
8
9
10
11
12
13
14
15
2
Resize an original to fit onto letter or A4 paper.....................................................55
Copy a faded original............................................................................................56
Copy a document that has been faxed several times...........................................57
Enhance light areas of your copy.........................................................................57
Make a poster.......................................................................................................58
Prepare a color iron-on transfer............................................................................58
Stop copying.........................................................................................................59
Use the scan features......................................................................................... 61
Scan to an application..........................................................................................61
Send a scan to an HP Instant Share destination..................................................62
Send a scan to a memory card.............................................................................62
Stop scanning.......................................................................................................63
Print from your computer..................................................................................65
Print from a software application..........................................................................65
Change the print settings......................................................................................66
Stop a print job.....................................................................................................67
Use HP Instant Share.........................................................................................69
Overview...............................................................................................................69
Get started............................................................................................................69
Send images using your HP all-in-one.................................................................. 70
Send images using your computer.......................................................................73
Order supplies....................................................................................................77
Order paper, transparency film, or other media....................................................77
Order print cartridges............................................................................................77
Order other supplies.............................................................................................78
Maintain your HP all-in-one...............................................................................79
Clean the HP all-in-one......................................................................................... 79
Check the estimated ink levels.............................................................................80
Print a self-test report ..........................................................................................80
Work with print cartridges.....................................................................................81
Change the device settings..................................................................................90
Troubleshooting information.............................................................................93
Before you call HP Support..................................................................................93
View the Readme file............................................................................................94
Setup troubleshooting...........................................................................................94
Operational troubleshooting................................................................................105
Device update.....................................................................................................107
Get HP support.................................................................................................109
Get support and other information from the Internet...........................................109
HP customer support..........................................................................................109
Access your serial number and service ID..........................................................109
Call in North America during warranty................................................................110
Call elsewhere in the world.................................................................................110
Call in Australia post-warranty............................................................................112
Call HP Korea customer support........................................................................113
Call HP Japan support........................................................................................113
Prepare your HP all-in-one for shipment............................................................. 114
Warranty information.......................................................................................117
Duration of limited warranty................................................................................117
Warranty service.................................................................................................117
HP PSC 2350 series all-in-one
Contents
Warranty upgrades.............................................................................................117
Returning your HP all-in-one for service.............................................................117
Hewlett-Packard limited global warranty statement............................................118
16 Technical information......................................................................................121
System requirements..........................................................................................121
Paper specifications...........................................................................................121
Print specifications..............................................................................................123
Copy specifications.............................................................................................123
Memory card specifications ...............................................................................124
Scan specifications.............................................................................................124
Physical specifications........................................................................................124
Power specifications ..........................................................................................124
Environmental specifications..............................................................................125
Additional specifications.....................................................................................125
Environmental product stewardship program.....................................................125
Regulatory notices..............................................................................................126
Declaration of conformity (European Economic Area) .......................................127
Declaration of conformity ...................................................................................128
Index.........................................................................................................................129
User Guide
3
4
HP PSC 2350 series all-in-one
HP all-in-one overview
Many HP all-in-one functions can be accessed directly, without turning on your
computer. Tasks such as making a copy or printing photos from a memory card can be
accomplished quickly and easily from your HP all-in-one.
This chapter describes the HP all-in-one hardware features, control panel functions, and
how to access the HP Image Zone software. Your HP all-in-one might not have all of
the features described in this guide.
Tip You can do more with your HP all-in-one by using the HP Image Zone software
installed on your computer during the initial setup. The software provides
enhanced copy, scan, and photo functionality, as well as troubleshooting tips and
product-specific help. For more information, see the onscreen HP Image Zone
Help and Use the HP Image Zone to do more with your HP all-in-one.
The HP all-in-one at a glance
User Guide
Label
Description
1
Lid
2
Glass
3
Memory card slots and camera port
4
Paper-width guide
5
Paper tray extender
6
Paper tray
7
Control panel
8
Color graphics display
5
HP all-in-one overview
1
Chapter 1
HP all-in-one overview
(continued)
Label
Description
9
Rear clean-out door
10
Rear USB port
11
Power connection
Control panel overview
This section describes the functions of the various buttons, lights, and arrows on the
HP all-in-one control panel.
6
HP PSC 2350 series all-in-one
Label
Name and Description
1
Color graphics display: View menus, photos, and messages. The color graphics
display can be pulled up and angled for better viewing.
2
On: Turn the HP all-in-one on or off. When the HP all-in-one is off, a minimal
amount of power is still supplied to the device. To completely disconnect the power
supply to the HP all-in-one, turn the device off, and then unplug the power cord.
User Guide
HP all-in-one overview
Control panel features
7
Chapter 1
HP all-in-one overview
(continued)
Label
Name and Description
3
Setup: Access the menu system for reports, maintenance, and help.
4
Left arrow: Decrease values, or go back when viewing photos on the color graphics
display.
5
OK: Select a menu, setting, or value displayed on the color graphics display.
6
Zoom out: Press 1 to see more of a photo on the color graphics display.
7
Keypad: Enter number of copies, navigate menus, browse photos on a memory
card, and so on.
8
Photo Menu: Print a photo, transfer photos to your computer, see a slide show, or
share photos with HP Instant Share.
9
Photo Edit: Adjust a photo for viewing or printing. Features include color effects,
photo brightness, frames, and red-eye removal.
10
Scan To: Select a scan destination.
11
Copy Menu: Select copy options, such as number of copies, paper size, and paper
type.
12
Start Copy Black: Start a black copy job.
13
Start Copy Color: Start a color copy job.
14
Start Scan: Start a scan job and send it to the destination you selected using the
Scan To button.
15
Proof Sheet: Print a proof sheet when a memory card has been inserted in a
memory card slot. A proof sheet shows thumbnail views of all the photos on the
memory card. You can select photos on the proof sheet, then print those photos by
scanning the proof sheet.
16
Print Photos: Select the photo function. When the button is lit, the photo function is
selected. Use this button to print photos from a memory card or to save photos to
your computer.
17
Rotate: Rotate the currently displayed photo on the color graphics display 90
degrees. Subsequent presses continue to rotate the photo 90 degrees.
Note Rotate only affects printing in album mode.
18
Zoom in: Press 5 to enlarge the image on the color graphics display. You can also
use this button to adjust the crop box when printing.
19
Down arrow: Navigate down through menu options.
20
Right arrow: Increase values, or go forward when viewing photos on the color
graphics display.
21
Cancel: Stop a job, exit a menu, or exit settings.
22
Up arrow: Navigate up through menu options.
8
HP PSC 2350 series all-in-one
The following icons appear at the bottom of the color graphics display to provide
important information about your HP all-in-one.
Icon
Purpose
Shows that a print cartridge is nearly empty. The color on
the bottom of the icon corresponds to the color on the top of
the print cartridge. For example, the green icon represents
the cartridge that has green on top, which is the tri-color
print cartridge.
Shows the ink level of the of print cartridge represented by
the color of the icon. This example shows the tri-color print
cartridge.
Color graphics display screen saver
In order to prolong the life of the color graphics display, the display dims after two
minutes of inactivity. After eight more minutes of inactivity (a total of ten minutes), the
display goes into Screen Saver mode. After 60 minutes of inactivity, the color graphics
display goes into Sleep State and the screen shuts off completely. The display turns
back on when you perform an operation, such as pressing a control panel button, lifting
the lid, inserting a memory card, accessing the HP all-in-one from a connected
computer, or connecting a device to the front camera port.
Menu Overview
The following tables provide a quick reference to top-level menus that appear on the
HP all-in-one color graphics display.
Copy Menu
Copy Menu
1. Number of Copies
2. Reduce/Enlarge
3. Paper Size
4. Paper Type
5. Copy Quality
6. Lighter/Darker
7. Enhancements
8. Color Intensity
9. Set New Defaults
User Guide
9
HP all-in-one overview
Color graphics display icons
Chapter 1
HP all-in-one overview
Scan To menu
The Scan To menu lists scan destinations, including applications installed on your
computer. Therefore, your Scan To menu might list scan destinations different than the
ones shown here.
Scan To (USB - Windows)
1. HP Image Zone
2. Microsoft PowerPoint
3. Adobe Photoshop
4. HP Instant Share
5. Memory Card
Scan To (USB - Macintosh)
1. JPEG to HP Gallery
2. Microsoft Word
3. Microsoft PowerPoint
4. HP Instant Share
5. Memory Card
Photo Menu
Photo Menu
1. Print Options
3. Transfer to Computer
4. Slideshow
5. HP Instant Share
Proof Sheet Menu
Proof Sheet Menu
1. Print Proof Sheet
2. Scan Proof Sheet
Setup Menu
The Help Menu selection on the Setup Menu provides quick access to key help topics.
Most of the information is presented on a connected Windows PC or Macintosh
computer screen. However, information about the color graphics display icons is
presented on the color graphics display.
10
HP PSC 2350 series all-in-one
HP all-in-one overview
Setup Menu
1. Help Menu
2. Print Report
3. Tools
4. Preferences
Use the HP Image Zone to do more with your HP all-inone
The HP Image Zone software is installed on your computer when you set up your
HP all-in-one. For further information, see the Setup Guide that came with your device.
Access to the HP Image Zone software differs by operating system (OS). For example,
if you have a PC and are running Windows, the HP Image Zone software entry point is
the HP Director. If you have a Macintosh and are running OS X V10.1.5 or later, the
HP Image Zone software entry point is the HP Image Zone window. Regardless, the
entry point serves as the launching pad for the HP Image Zone software and services.
You can quickly and easily expand the functionality of your HP all-in-one by using the
HP Image Zone software. Look for boxes like this throughout the guide that provide
topic-specific tips and helpful information for your projects.
Access the HP Image Zone software (Windows)
Open the HP Director from the desktop icon, system tray icon, or the Start menu. The
HP Image Zone software features appear in the HP Director.
To open the HP Director
1
Do one of the following:
–
–
–
2
3
On the Windows desktop, double-click the HP Director icon.
In the system tray at the far right of the Windows taskbar, double-click the
Hewlett-Packard Digital Imaging Monitor icon.
On the taskbar, click Start, point to Programs or All Programs, select HP,
and then click HP Director.
In the Select Device box, click to see a list of installed devices.
Select the HP all-in-one.
Note The icons in the HP Director graphic below might appear differently on your
computer. The HP Director is customized to display icons associated with the
device that is selected. If the selected device is not equipped with a particular
feature or function, then the icon for that feature or function does not display in
the HP Director.
Tip If the HP Director on your computer does not contain any icons, an error might
have occurred during the software installation. To correct this, use the Control
Panel in Windows to completely uninstall the HP Image Zone software; then
reinstall the software. For more information, see the Setup Guide that came with
your HP all-in-one.
User Guide
11
HP all-in-one overview
Chapter 1
Button
Name and Purpose
Scan Picture: Scans a photo, picture, or drawing and displays it in the
HP Image Zone.
Scan Document: Scans a document that contains text or both text and
graphics, and displays it in your selected program.
Make Copies: Displays the Copy dialog box for the selected device, from which
you can make a printed copy of your image or document. You can select the
copy quality, number of copies, color, and size.
HP Image Zone: Displays the HP Image Zone, where you can:
●
●
●
●
●
View and edit images
Print photos in multiple sizes
Make and print a photo album, postcard, or flyer
Make a multimedia CD
Share images through e-mail or a website
Transfer Images: Displays the HP Image Transfer software, which allows you to
transfer images from the HP all-in-one, and save them on your computer.
Note For information on additional features and menu items such as Software Update,
Creative Ideas, and HP Shopping, see the onscreen HP Image Zone Help.
Menu and list items are also available to help you select the device you want to use,
check its status, adjust a variety of software settings, and access the onscreen help.
The following table explains these items.
Feature
Purpose
Help
Use this feature to access the HP Image Zone Help, which provides software
help and troubleshooting information for your HP all-in-one.
Select Device
Use this feature to select the device you want to use from the list of installed
devices.
Settings
Use this feature to view or change various settings for your HP all-in-one, such
as print, scan, or copy.
Status
Use this feature to display the current status of your HP all-in-one.
Open the HP Image Zone software (Macintosh OS X v10.1.5or later)
Note Macintosh OS X v10.2.1 and v10.2.2 are not supported.
When you install the HP Image Zone software, the HP Image Zone icon is placed in
the Dock.
12
HP PSC 2350 series all-in-one
You can access the HP Image Zone software in one of two ways:
●
●
Through the HP Image Zone window
Through the HP Image Zone Dock menu
Open the HP Image Zone window
Select the HP Image Zone icon to open the HP Image Zone window. The HP Image
Zone window has two main elements:
●
The display area for the Products/Services tabs
–
–
●
The Products tab gives you access to many of the features of your HP
imaging products, such as an installed products pop-up menu and a list of
tasks available for the current product. The list may include tasks such as
copy, scan, fax, or transfer images. Clicking on a task opens an application to
assist you with that task.
The Services tab gives you access to digital imaging applications that can
help you view, edit, manage, and share you images.
The Search HP Image Zone Help text entry field
The Search HP Image Zone Help text entry field lets you search HP Image Zone
Help for keywords or phrases.
To open the HP Image Zone window
➔
Click the HP Image Zone icon in the Dock.
The HP Image Zone window appears.
The HP Image Zone window displays only the HP Image Zone features that are
appropriate for the selected device.
Note The icons in the table below might appear differently on your computer. The
HP Image Zone window is customized to display feature icons associated with
the device that is selected. If the selected device is not equipped with a
particular feature or function, then that feature or function does not display in the
HP Image Zone window.
Products
Icon
Feature and Purpose
Unload Images: Use this feature to transfer images from a memory card to
your computer.
User Guide
13
HP all-in-one overview
Note If you install more than one HP all-in-one, an HP Image Zone icon for each
device is displayed in the Dock. For example, if you have an HP scanner and an
HP all-in-one installed, two HP Image Zone icons are present in the Dock, one
for each device. However, if you installed two of the same kind of device (for
example, two HP all-in-ones) only one HP Image Zone icon is displayed in the
Dock to represent all devices of that kind.
Chapter 1
HP all-in-one overview
(continued)
Products
Icon
Feature and Purpose
Scan Picture: Use this feature to scan an image and display it in the
HP Gallery.
Scan to OCR: Use this feature to scan text and display it in the selected
destination text editing software program.
Note Availability of this feature varies by country/region.
Make Copies: Use this feature to make a copy in black and white or color.
Services
Icon
Feature and Purpose
HP Gallery: Use this feature to display the HP Gallery to view and edit
images.
HP Image Print: Use this feature to print images from an album using one of
several templates available.
HP Instant Share: Use this feature to open the HP Instant Share software
client application.
In addition to the feature icons, several menu and list items allow you to select the
device you want to use, adjust a variety of software settings, and access the onscreen
help. The following table explains these items.
Feature
Purpose
Select Device
Use this feature to select the device you want to use from a list of installed
devices.
Settings
Use this feature to view or change various settings for your HP all-in-one, such
as print, scan, or copy.
Search HP
Image Zone
Help
Use this feature to search the HP Image Zone Help, which provides software
help and troubleshooting information for your HP all-in-one.
14
HP PSC 2350 series all-in-one
The HP Image Zone Dock menu provides a shortcut to HP Image Zone services. The
Dock menu automatically contains all of the applications available in the HP Image
Zone window Services tab list. You can also set HP Image Zone preferences to add
other items to the menu, such as tasks from the Products tab list or HP Image Zone
Help.
To display the HP Image Zone Dock menu
➔
Do one of the following:
–
–
–
Set either HP Gallery or iPhoto as your preferred photo manager.
Set additional options associated with your preferred photo manager.
Customize the list of items displayed in the HP Image Zone Dock menu.
Access the HP Image Zone software (Macintosh OS earlier than X v10.1.5)
Note Macintosh OS 9 v9.1.5 and later and v9.2.6 and later are supported. Macintosh
OS X v10.0 and v10.0.4 are not supported.
The HP Director is the entry point to the HP Image Zone software. Depending on the
capabilities of your HP all-in-one, the HP Director lets you initiate device functions such
as scanning, copying, or unloading images from a digital camera or memory card. You
can also use the HP Director to open the HP Gallery to view, modify, and manage the
images on your computer.
Use one of the following methods to open the HP Director. The methods are Macintosh
OS specific.
●
Macintosh OS X: The HP Director opens automatically during HP Image Zone
software installation, and an HP Director icon is created in the Dock for your
device. To display the HP Director menu:
In the Dock, click the HP Director icon for your device.
The HP Director menu appears.
Note If you install several HP devices of different kinds (for example, an
HP all-in-one, a camera, and an HP scanner), an HP Director icon for
each kind of device is displayed in the Dock. However, if you install two
of the same kind of device (for example, you may have a laptop that you
connect to two different HP all-in-one devices -- one at work and one at
home) only one HP Director icon is displayed in the Dock.
●
Macintosh OS 9: The HP Director is a standalone application that must be opened
before its features can be accessed. Use one of the following methods to open the
HP Director:
–
–
Double-click the HP Directorr alias on the desktop.
Double-click the HP Director alias in the Applications:Hewlett-Packard:HP
Photo and Imaging Software folder.
The HP Director displays only the task buttons that pertain to the selected
device.
User Guide
15
HP all-in-one overview
Display the HP Image Zone Dock menu
HP all-in-one overview
Chapter 1
Note The icons in the table below might appear differently on your computer. The
HP Director menu is customized to display feature icons associated with the
device that is selected. If the selected device is not equipped with a particular
feature or function, then the icon for that feature or function does not display.
Device Tasks
Icon
Purpose
Unload Images: Use this feature to transfer images from a memory card to
your computer.
Scan Picture: Use this feature to scan an image and display it in the
HP Gallery.
Scan Document: Use this feature to scan text and display it in the selected
destination text editing software program.
Note Availability of this feature varies by country/region.
Make Copies: Use this feature to make a copy in black and white or color.
Manage and Share
Icon
Purpose
HP Gallery: Use this feature to display the HP Gallery to view and edit
images.
In addition to the HP Gallery feature, several menu items without icons allow you to
select other applications on your computer, change feature settings on your HP all-inone, and access the onscreen help. The following table explains these items.
Manage and Share
Feature
Purpose
More
Applications
Use this feature to select other applications on your computer.
HP on the Web Use this feature to select an HP website.
HP Help
Use this feature to select a source for help with your HP all-in-one.
Settings
Use this feature to view or change various settings for your HP all-in-one, such
as print, scan, or copy.
16
HP PSC 2350 series all-in-one
2
Find more information
A variety of resources, both printed and onscreen, provide information about setting up
and using your HP all-in-one.
Setup Guide
The Setup Guide provides instructions for setting up your
HP all-in-one and installing software. Make sure you follow
the steps in order.
User Guide
HP Photosmart
2600 series printer
User Guide
The User Guide contains information on how to use your
HP all-in-one, including troubleshooting tips and step-by-step
instructions.
HP Image Zone Tour
The HP Image Zone Tour is a fun, interactive way to get a
brief overview of the software included with your HP all-inone. You'll learn how HP Image Zone can help you edit,
organize, and print your photos.
HP Director
The HP Director provides easy access to the software
applications, default settings, status, and onscreen Help for
your HP device. To start the HP Director, double-click the
HP Director icon from your desktop.
HP Image Zone Help
The HP Image Zone Help provides detailed information on
using the software for your HP all-in-one.
●
●
User Guide
The Get step-by-step instructions topic provides
information on using the HP Image Zone software with
HP devices.
The Explore what you can do topic provides more
information about the practical and creative things you
17
Find more information
If you have problems during setup, see Troubleshooting in
the last section of the Setup Guide, the Troubleshooting
section in this guide, or visit www.hp.com/support.
Chapter 2
(continued)
●
can do with the HP Image Zone software and your HP
devices.
If you need further assistance or want to check for HP
software updates, see the Troubleshooting and
support topic.
Onscreen help from your device
Find more information
Onscreen help is available from your device and contains
additional information on select topics. Access the Onscreen
help from the control panel. From the Setup menu, highlight
the Help menu item and press OK.
Readme
The Readme file contains the most recent information which
might not be found in other publications.
Install the software to access the Readme file.
18
HP PSC 2350 series all-in-one
3
Connection information
Your HP all-in-one comes equipped with a USB port so you can connect directly to a
computer using a USB cable. It also has networking capability which can be accessed
by using an external print server (HP JetDirect 175x). The HP JetDirect can be
purchased as an accessory for your HP all-in-one and lets you easily and inexpensively
share your device through an existing Ethernet network.
Supported connection types
Recommended
number of
connected
computers for best
performance
Supported software
features
Setup instructions
USB connection
One computer
connected by means
of a USB cable to the
device.
All features are
supported.
Follow the Setup
Guide for detailed
instructions.
Windows printer
sharing
Five.
All features resident
See the Windows
on the host computer Printer Sharing setup
are supported. Only
instructions below.
print is supported from
the other computers.
Printer sharing
(Macintosh)
Five.
Networked by means
of the HP JetDirect
175x (J6035C)
Five networkOnly print and
connected computers. Webscan are
supported.
The “host” computer
must be on at all times
in order to print from
the other computers.
All features resident
See the Printer
on
the
host
computer
Sharing setup
The “host” computer
are
supported.
Only
instructions below.
must be on at all times
print is supported from
in order to print from
the other computers.
the other computers.
For setup instructions,
seeSet up the
HP JetDirect 175x.
Availability of the
HP JetDirect product
varies by country/
region.
Connect using a USB cable
Detailed instructions for connecting a computer to your HP all-in-one using a USB cable
are included in the Setup Guide that came with your device.
User Guide
19
Connection information
Description
Chapter 3
Use Windows printer sharing
If your computer is on a network, and another computer on the network has an HP allin-one connected to it by means of a USB cable, you can use that device as your
printer using Windows printer sharing. The computer directly connected to the HP allin-one acts as the host for the printer and has full feature functionality. Your computer,
which is referred to as a client, has access only to the print features. All other functions
must be performed on the host computer.
To enable Windows printer sharing
➔
Refer to the user guide that came with your computer.
Use printer sharing (Macintosh OS X)
If your computer is on a network, and another computer on the network has an HP allin-one connected to it by means of a USB cable, you can use that device as your
printer using printer sharing. The computer directly connected to the HP all-in-one acts
as the host for the printer and has full feature functionality. Your computer, which is
referred to as a client, has access only to the print features. All other functions must be
performed on the host computer.
To enable printer sharing
1
Connection information
2
3
On the host computer, select System Preferences in the Dock.
The System Preferences window appears.
Select Sharing.
From the Services tab, click Printer Sharing.
Set up the HP JetDirect 175x
Your HP all-in-one can be shared by up to five computers on a local area network
(LAN) by using the HP JetDirect 175x as a print server for all computers on the
network. Simply connect your HP JetDirect to your HP all-in-one and router or hub, and
then run the HP JetDirect installation CD. The required printer drivers (INF file) are
located on the installation CD for your HP all-in-one.
Note If your HP all-in-one has been connected to a computer with a USB cable and
you now want to connect it to a network using an HP JetDirect, you will only be
able to print or scan (using Webscan) from your computer(s). If you try to use the
HP Image Zone software, you will find that the scan picture, scan documents,
send a fax, and make copies features display errors messages indicating that the
HP all-in-one is disconnected.
Tip If you are performing an initial installation of both your HP all-in-one and
HP JetDirect 175x, use the Setup Guide for your HP all-in-one and follow the
hardware setup instructions. Then follow the instructions below.
To network connect your HP all-in-one using the HP JetDirect 175x (Windows)
1
2
20
Follow the HP JetDirect 175x setup instructions to connect the print server to a
LAN.
Connect the HP JetDirect to the USB port on the rear of your HP all-in-one.
HP PSC 2350 series all-in-one
3
4
5
Insert the installation CD that was supplied with the HP JetDirect into your
computer's CD-ROM drive.
You will use this CD to locate the HP JetDirect on the network.
Select Install to run the HP JetDirect installer.
When prompted, insert the HP all-in-one installation CD.
Note If you are performing an initial installation of your HP all-in-one and
HP JetDirect 175x, do not run the HP all-in-one setup wizard. Just install the
drivers following the instructions below.
If you decide at some later date to connect your HP all-in-one using a USB
cable, then insert the HP all-in-one installation CD and run the setup wizard.
6
Follow the steps appropriate for your operating system:
If you are using Windows XP or 2000:
a
Browse to the root directory of the CD and select the correct driver .inf for your
HP all-in-one.
The printer driver file, located in the root directory, is hpoprn08.inf.
If you are using Windows 98 or ME:
a
b
7
Browse the CD for the "Drivers" folder and find the correct language subfolder.
For example, for English speaking customers, navigate to the \enu\drivers
\win9x_me directory, where enu is the English language directory and
win9x_me is for Windows ME. The printer driver file is hpoupdrx.inf.
Repeat for each of the drivers required.
Complete the installation.
1
2
3
Follow the HP JetDirect 175x setup instructions to connect the print server to a
LAN.
Connect the HP JetDirect to the USB port on the rear of your HP all-in-one.
Do one of the following:
–
–
4
If you are performing an initial installation of your HP all-in-one, make sure you
insert the HP all-in-one installation CD into the CD-ROM drive on your
computer and run the HP all-in-one setup wizard.
The network support software for your computer is installed at this time.
When the installation is finished, the HP All-in-One Setup Assistant appears
on your computer.
From the Disk Drive, open the HP All-in-One Setup Assistant from the
following location: Applications:Hewlett-Packard:HP Photo & Imaging
Software:HP AiO Software
The HP All-in-One Setup Assistant appears on your computer.
Follow the onscreen prompts and provide the information requested.
Note Make sure you click TCP/IP Network on the connection screen.
User Guide
21
Connection information
To network connect your HP all-in-one using the HP JetDirect 175x (Macintosh)
Chapter 3
Use Webscan
Webscan lets you perform a basic scan through the HP JetDirect 175x using just a Web
browser. It also lets you perform the scan from your HP all-in-one without the device
software installed on your computer. Just enter the IP address of the HP JetDirect in a
Web browser and access the HP JetDirect embedded Web server and Webscan. For
more information on printing a network configuration page to obtain the IP address of
the HP JetDirect, see the user guide that came with your HP JetDirect 175x.
Connection information
The user interface for Webscan is unique to using the HP Jet Direct and does not
support scan-to destinations like the HP Image Zone scanning software. The e-mail
functionality of Webscan is limited, so it is recommended you use the HP Image Zone
scanning software for this feature instead.
22
HP PSC 2350 series all-in-one
4
Work with photos
Your HP all-in-one allows you to transfer, edit, share, and print photos in several
different ways. This chapter contains a brief overview of the wide range of options for
performing each of these tasks, depending on your preferences and computer setup.
More detailed information for each task is available in other chapters within this guide,
or in the onscreen HP Image Zone Help that came with your software.
Transfer photos
You have several different options for transferring photos. You can transfer photos to
your HP all-in-one, your computer, or a memory card. For more information, see the
section below specific to your operating system.
Transfer photos using a Windows PC
The graphic below shows several methods for transferring photos to your Windows PC,
HP all-in-one, or a memory card. For more information, see the list below the graphic.
Transfer a photo from a memory card inserted into your HP all-in-one to your
Windows PC.
B
Transfer a photo from your HP digital camera to your Windows PC.
C
Transfer a photo by scanning a photo directly onto a memory card inserted into
your HP all-in-one.
23
Work with photos
User Guide
A
Chapter 4
Transfer photos using a Macintosh
The graphic below shows several methods for transferring photos to your Macintosh,
HP all-in-one, or a memory card. For more information, see the list below the graphic.
A
Transfer a photo from a memory card inserted into your HP all-in-one to your
Macintosh.
B
Transfer a photo from your HP digital camera to your Macintosh.
C
Transfer a photo by scanning a photo directly onto a memory card inserted into
your HP all-in-one.
Edit photos
You have several different options for editing photos. For more information, see the
section below specific to your operating system.
Edit photos using a Windows PC
Work with photos
The graphic below shows two methods for editing photos using a Windows PC. For
more information, see the list below the graphic.
24
HP PSC 2350 series all-in-one
A
Edit a photo on your Windows PC using the HP Image Zone software.
B
Edit a photo using the control panel on your HP all-in-one.
Edit photos using a Macintosh
The graphic below shows three methods for editing photos using a Macintosh. For more
information, see the list below the graphic.
Edit a photo on your Macintosh using the HP Image Zone software.
B
Edit a photo on your Macintosh using the iPhoto software.
C
Edit a photo using the control panel on your HP all-in-one.
Work with photos
User Guide
A
25
Chapter 4
Share photos
You have several different options for sharing photos with friends and family. For more
information, see the section below specific to your operating system.
Share photos using a Windows PC
The graphic below shows several methods for sharing photos using a Windows PC. For
more information, see the list below the graphic.
A
Share photos from your USB-connected HP all-in-one using the HP Instant
Share server. Transfer photos from your USB-connected HP all-in-one to your
computer, where you use the HP Instant Share software to send the photos
through the HP Instant Share server as an e-mail to your friends or family.
Share photos using a Macintosh
The graphic below shows several methods for sharing photos using a Macintosh. For
more information, see the list below the graphic.
Work with photos
A
Share photos from your USB-connected HP all-in-one using the HP Instant
Share server. Transfer photos from your USB-connected HP all-in-one to your
computer, where you use the HP Instant Share software to send the photos
through the HP Instant Share server as an e-mail to your friends or family.
Print photos
You have several different options for printing photos. For more information, see the
section below specific to your operating system.
Print photos using a Windows PC
The graphic below shows several methods for printing photos using a Windows PC. For
more information, see the list below the graphic.
26
HP PSC 2350 series all-in-one
A
Print photos from your HP digital camera using PictBridge.
B
Print photos from your camera using a software application on your computer.
C
Print photos from a memory card using the control panel on the HP all-in-one.
D
Print photos from a memory card by transferring photos to your Windows PC
and printing them using the HP Image Zone software.
Print photos using a Macintosh
The graphic below shows several methods for printing photos using a Macintosh. For
more information, see the list below the graphic.
Work with photos
User Guide
27
Chapter 4
Print photos from your HP digital camera using PictBridge.
B
Print photos from your camera using a software application on your computer.
C
Print photos from a memory card using the control panel on the HP all-in-one.
D
Print photos from a memory card by transferring photos to your Macintosh and
printing them using the HP Gallery software or the HP Director software.
Work with photos
A
28
HP PSC 2350 series all-in-one
Load originals and load paper
This chapter provides instructions for loading originals on the glass to copy or scan;
guidelines for choosing the best paper type for your job; instructions for loading paper in
the paper tray; and tips for avoiding paper jams.
Load an original
You can copy or scan up to letter- or A4-size originals by loading them on the glass, as
described here. You should also follow these instructions when loading a proof sheet on
the glass for photo printing.
Note Many of the special features will not work correctly if the glass and lid backing
are not clean. For more information, see Clean the HP all-in-one.
To load an original on the glass
1
Lift the lid and place your original face down on the right front corner of the glass.
If you are loading a proof sheet, make sure the top of the proof sheet is lined up
against the right edge of the glass.
Tip For more help on loading an original, refer to the guides along the front and
right edges of the glass.
2
Close the lid.
Tip You can copy or scan oversized originals by completely removing the lid from
your HP all-in-one. To remove the lid, lift the lid to the open position, grasp the
sides of the lid, and then pull the lid upward. Your HP all-in-one functions
normally with the lid removed. Replace the lid by inserting the hinges back into
the appropriate slots.
User Guide
29
Load originals and load paper
5
Load originals and load paper
Chapter 5
Choose papers for printing and copying
You can use many types and sizes of paper in your HP all-in-one. Review the following
recommendations to get the best printing and copying quality. Whenever you change
paper types or sizes, remember to change those settings.
Recommended papers
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing. If you are printing photos, for example,
load glossy or matte photo paper in the paper tray. If you are printing a brochure or
presentation, use a type of paper specifically designed for that purpose.
For more information about HP papers, see the onscreen HP Image Zone Help, or go
to www.hp.com/support.
Papers to avoid
Using paper that is too thin, paper that has a slick texture, or paper that stretches easily
can cause paper jams. Using paper that has a heavy texture or does not accept ink can
cause printed images to smear, bleed, or not fill in completely.
We do not recommend printing to the following papers:
●
●
●
●
●
●
30
Paper with cutouts or perforations (unless specifically designed for use with
HP inkjet devices).
Highly textured stock, such as linen. It may not print evenly, and the ink can bleed
into these papers.
Extremely smooth, shiny, or coated papers not specifically designed for your
HP all-in-one. They can jam the HP all-in-one or repel the ink.
Multi-part forms (such as duplicate and triplicate forms). They can wrinkle or get
stuck. The ink is also more likely to smear.
Envelopes with clasps or windows.
Banner paper.
HP PSC 2350 series all-in-one
Load originals and load paper
We do not recommend copying to the following papers:
●
●
●
●
●
●
●
Any size paper other than letter, A4, 10 by 15 cm (4 by 6 inch), 5 by 7 inch,
Hagaki, or L (Japan only).
Paper with cutouts or perforations (unless specifically designed for use with
HP inkjet devices).
Photo paper other than HP Premium Photo Paper or
HP Premium Plus Photo Paper.
Envelopes.
Banner paper.
Transparency film other than HP Premium Inkjet Transparency Film or
HP Premium Plus Inkjet Transparency Film.
Multiple-part forms or label stock.
Load paper
This section describes the procedure for loading different types and sizes of paper into
your HP all-in-one for your copies or printouts.
Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a
resealable bag. If the paper is not stored properly, extreme changes in
temperature and humidity might result in curled paper that does not work well in
the HP all-in-one.
Load full-size paper
You can load many types of letter, A4, or legal paper into the paper tray of your HP allin-one.
To load full-size paper
1
Open the paper tray door.
2
Pull out and fully extend the paper tray extender.
Warning Legal paper might get caught on the paper tray extender if it is
fully extended when you print onto legal paper. To avoid a paper jam when
using legal-size paper, do not flip open the paper tray extender as shown
here.
User Guide
31
Load originals and load paper
Chapter 5
3
Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide to its outermost position.
4
Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
–
–
5
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
Make sure all the paper in the stack is the same size and type.
Insert the stack of paper into the paper tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.
Tip If you are using letterhead, insert the top of the page first with the print side
down. For more help on loading full-size paper and letterhead, refer to the
diagram engraved in the base of the paper tray.
6
Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward until it stops at the edge of the paper.
Do not overload the paper tray; make sure the stack of paper fits within the paper
tray and is no higher than the top of the paper-width guide.
32
HP PSC 2350 series all-in-one
You can load 10 by 15 cm (4 by 6 inch) photo paper into the paper tray of your HP allin-one. For the best results, use a recommended type of 10 by 15 cm (4 by 6 inch)
photo paper. For more information, see Recommended papers.
In addition, for best results, set the paper type and paper size before copying or
printing. For information on changing paper settings, see the onscreen HP Image Zone
Help.
Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a
resealable bag. If the paper is not stored properly, extreme changes in
temperature and humidity might result in curled paper that does not work well in
the HP all-in-one.
To load 10 by 15 cm (4 by 6 inch) photo paper
1
2
3
Remove all paper from the paper tray.
Insert the stack of photo paper into the far right side of the paper tray with the short
edge forward and the glossy side down. Slide the stack of photo paper forward
until it stops.
If the photo paper you are using has perforated tabs, load the photo paper so that
the tabs are closest to you.
Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of photo paper until it stops.
Do not overload the paper tray; make sure the stack of photo paper fits within the
paper tray and is no higher than the top of the paper-width guide.
Load postcards or Hagaki cards
You can load postcards or Hagaki cards into the paper tray of your HP all-in-one.
For the best results, set the paper type and size before printing or copying. For more
information, see the onscreen HP Image Zone Help.
To load postcards or Hagaki cards
1
User Guide
Remove all paper from the paper tray.
33
Load originals and load paper
Load 10by 15cm (4by 6inch) photo paper
Load originals and load paper
Chapter 5
2
3
Insert the stack of cards into the far right side of the paper tray with the short edge
forward and the print side down. Slide the stack of cards forward until it stops.
Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of cards until it stops.
Do not overload the paper tray; make sure the stack of cards fits within the paper
tray and is no higher than the top of the paper-width guide.
Load envelopes
You can load one or more envelopes into the paper tray of your HP all-in-one. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes, consult the
help files in your word processing software. For best results, consider using a
label for the return address on envelopes.
To load envelopes
1
2
Remove all paper from the paper tray.
Insert one or more envelopes into the far right side of the paper tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved in the
base of the paper tray.
3
Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of envelopes until it stops.
Do not overload the paper tray; make sure the stack of envelopes fits within the
paper tray and is no higher than the top of the paper-width guide.
Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types. For
information on changing paper settings, see the onscreen HP Image Zone Help.
34
HP PSC 2350 series all-in-one
Paper
Tips
HP papers
●
●
HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then slide the paper into the paper tray with the
arrow side facing up.
HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top and
is going into the paper tray first.
Note The HP all-in-one cannot automatically detect transparency
film. For best results, set the paper type to transparency film
before printing or copying onto transparency film.
●
●
Labels
(for printing from a
software application
only)
HP Iron-On Transfers: Flatten the transfer sheet completely before
using it; do not load curled sheets. (To prevent curling, keep transfer
sheets sealed in the original package until you are ready to use
them.) Locate the blue stripe on the nonprinting side of the transfer
paper and then manually feed one sheet at a time into the paper tray
with the blue stripe facing up.
HP Matte Greeting Cards, HP Photo Greeting Cards, or
HP Textured Greeting Cards: Insert a small stack of HP greeting
card paper into the paper tray with the print side down; slide the
stack of cards forward until it stops.
Always use letter or A4 label sheets designed for use with HP inkjet
devices (such as Avery inkjet labels), and make sure that the labels are
not more than two years old.
1
2
Fan the stack of labels to make sure none of the pages are sticking
together.
Place a stack of label sheets on top of full-size plain paper in the
paper tray, label side down. Do not insert labels one sheet at a time.
Avoid paper jams
To help avoid paper jams, follow these guidelines:
●
●
●
●
User Guide
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable
bag.
Remove printed papers from the paper tray frequently.
Ensure that paper loaded in the paper tray lays flat and the edges are not bent or
torn.
Do not combine different paper types and paper sizes in the paper tray; the entire
stack of paper in the paper tray must be the same size and type.
35
Load originals and load paper
Note Not all paper sizes and paper types are available with all the functions on the
HP all-in-one. Some paper sizes and paper types can only be used if you are
starting a print job from the Print dialog box in a software application. They are
not available for copying or printing photos from a memory card or digital
camera. Papers that are only available for printing from a software application
are indicated as such, below.
Load originals and load paper
Chapter 5
●
●
●
Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make
sure the paper guide does not bend the paper in the paper tray.
Do not force paper too far forward in the paper tray.
Use paper types that are recommended for your HP all-in-one. For more
information, see Choose papers for printing and copying.
For more information about clearing paper jams, see Paper troubleshooting.
36
HP PSC 2350 series all-in-one
6
Use a memory card or PictBridge
camera
The HP all-in-one can access the memory cards used in most digital cameras so you
can print, store, manage, and share your photos. You can insert the memory card into
the HP all-in-one, or connect your camera directly, letting the HP all-in-one read the
contents of the memory card while it is still in the camera.
The memory card slots and camera port
If your digital camera uses a memory card to store photos, you can insert the memory
card in your HP all-in-one to print or save your photos.
You can print a proof sheet, which might be several pages long and shows thumbnail
views of photos stored on the memory card, and print photos from the memory card,
even if your HP all-in-one is not connected to a computer. You can also connect a
digital camera that supports PictBridge to the HP all-in-one through the camera port and
print directly from the camera.
Your HP all-in-one can read the following memory cards: CompactFlash (I, II), Memory
Sticks, MultiMediaCard (MMC), Secure Digital, SmartMedia, and xD-Picture Card.
Note You can scan a document and send the scanned image to an inserted memory
card. For more information, see Send a scan to a memory card.
Your HP all-in-one features four slots for memory cards, shown in the following
illustration, with the memory cards that correspond to each slot.
User Guide
37
Memory Card and PictBridge
This chapter contains information on using memory cards or a PictBridge camera with
your HP all-in-one. Read this chapter for information on transferring photos to your
computer, setting photo print options, printing photos, editing photos, viewing slide
shows, and sharing photos with your family and friends.
Chapter 6
The slots are configured as follows (from top to bottom):
●
●
●
●
●
SmartMedia, xD-Picture Card (fits in top right of the slot)
Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied
adapter), Memory Stick Pro
CompactFlash (I, II )
Secure Digital, MultiMediaCard (MMC)
Camera port (below the memory card slots): compatible with any USB-equipped
digital camera that supports PictBridge
Memory Card and PictBridge
Note The camera port only supports USB-equipped digital cameras that support
PictBridge. It does not support other types of USB devices. If you attach a USB
device that is not a compatible digital camera to the camera port, an error
message appears on the color graphics display. If you have an older HP-brand
digital camera, try using the USB cable that came with the camera. Plug it into
the USB port on the back of the HP all-in-one and not into the camera port near
the memory card slots.
Tip By default, Windows XP will format a memory card of 8 MB or less and 64 MB or
more with the FAT32 format. Digital cameras and other devices use the FAT
(FAT16 or FAT12) format and cannot operate with a FAT32 formatted card. Either
format your memory card in your camera or select FAT format to format your
memory card in a Windows XP PC.
Transfer photos to your computer
After you take photos with your digital camera, you can print them immediately or save
them directly to your computer. To save them to your computer, you need to remove the
memory card from the camera and insert it in the appropriate memory card slot on the
HP all-in-one.
Note You can only use one memory card in your HP all-in-one at a time.
To use a memory card
1
Insert the memory card into the appropriate slot on your HP all-in-one.
When the memory card is inserted correctly, the status light next to the memory
card slots begins to blink. Reading photos... appears on the color graphics
display. The status light next to the memory card slots blinks green when the card
is being accessed.
If you insert a memory card incorrectly, the status light next to the memory card
slots blinks amber and the color graphics display shows an error message such as
Card is in backwards or Card is not fully inserted.
Warning Never attempt to remove a memory card while it is being
accessed. Doing so can damage files on the card. You can safely remove a
card only when the status light next to the slots is not blinking.
2
3
38
If there are photo files on the memory card that have never been transferred
before, a dialog box on your computer asks whether you want to save the photo
files to your computer.
Click the option to save.
HP PSC 2350 series all-in-one
This saves all the new photos from the memory card to your computer.
For Windows: by default, files are saved in month and year folders depending on
when the photos were taken. The folders are created in a C:\Documents and
Settings\username\My Documents\My Pictures folder in Windows XP and
Windows 2000.
For Macintosh: by default, files are saved to the computer at Hard Drive:
Documents:HP All-in-One Data:Photos folder (OS 9) or Hard Drive:Users:User
Name:Pictures:HP Photos folder (OS X).
When the HP all-in-one finishes reading the memory card, the status light next to
the memory card slots stops blinking and stays lit. The first photo on the memory
card appears on the color graphics display.
To navigate through the photos on the memory card, press or to move
backward or forward through the photos, one photo at a time. Press and hold or
to move rapidly backward or forward through the photos.
Print photos from a proof sheet
A proof sheet is a simple and convenient way to select photos and make prints directly
from a memory card without the need for a computer. A proof sheet, which might be
several pages long, shows thumbnail views of photos stored on the memory card. The
file name, index number, and date appear under each thumbnail. Proof sheets are also a
quick way to create a printed catalog of your photos. In order to print photos using a
proof sheet, you need to print the proof sheet, complete it, and then scan it.
Printing photos from a proof sheet is done in three steps: printing a proof sheet,
completing the proof sheet, and scanning the proof sheet. This section contains detailed
information on all three steps.
Tip You can also improve the quality of the photos you print with the HP all-in-one by
purchasing a photo print cartridge. With the tri-color print cartridge and photo print
cartridge installed, you have a six-ink system, which provides enhanced quality
color photos. For more information on the photo print cartridge, see Use a photo
print cartridge.
Print a proof sheet
The first step in using a proof sheet is to print it from the HP all-in-one.
1
2
Insert the memory card into the appropriate slot on your HP all-in-one.
In the Photo area, press Proof Sheet, and then press 1.
This displays the Proof Sheet Menu and then selects Print Proof Sheet.
Note Depending on how many photos are on the memory card, the time it takes to
print a proof sheet can vary greatly.
User Guide
39
Memory Card and PictBridge
Tip You can also use the control panel to transfer memory card files to an
attached computer. In the Photo area, press Photo Menu, and then press 3 to
select Transfer to computer. Follow the prompts on the computer. In
addition, the memory card appears as a drive on your computer. You can
move the photo files from the memory card to the desktop.
Chapter 6
3
If there are more than 20 photos on the card, the Select Photos Menu appears.
Press the number next to the command you want to select:
–
–
–
1. All
2. Last 20
3. Custom Range
Note Use the proof sheet index number to select which photos to print for a
custom range. This number might be different from the number associated
with the photo on your digital camera. If you add or delete photos from your
memory card, reprint the proof sheet to see accurate index numbers.
Memory Card and PictBridge
4
If you choose Custom Range, enter the photo index numbers for the first and last
photos you want to print.
Note You can erase index numbers by pressing
to backspace.
Complete the proof sheet
After you have printed a proof sheet, you can use it to select the photos you want to
print.
Note You might want to use a photo print cartridge for superior print quality. With the
tri-color and photo print cartridges installed, you have a six-ink system. For more
information, see Use a photo print cartridge.
To complete a proof sheet
1
2
40
Select the photos to print by using a dark pen or pencil to fill in the circles located
under the thumbnail images on the proof sheet.
Select one layout style by filling in a circle in step 2 of the proof sheet.
HP PSC 2350 series all-in-one
Note If you need more control over print settings than the proof sheet provides,
you can print photos directly from the control panel. For more information,
see Print photos directly from a memory card.
Scan a proof sheet
Tip Make sure the glass of the HP all-in-one is completely clean or the proof sheet
might not scan properly. For more information, see Clean the glass.
1
Load the proof sheet face down on the right front corner of the glass. Make sure the
sides of the proof sheet touch the right and front edges. Close the lid.
2
Load 10 by 15 cm ((4 by 6 inch)) photo paper loaded in the input tray. Make sure
the same memory card you used to print the proof sheet is still in the slot when you
scan that proof sheet.
In the Photo area, press Proof Sheet, and then press 2.
3
This displays the Proof Sheet Menu and then selects Scan Proof Sheet.
The HP all-in-one scans the proof sheet and prints the selected photos.
Set photo print options
From the control panel, you can control how your HP all-in-one prints photos, including
paper type and size, layout, and more.
This section contains information on the following topics: setting photo print options,
changing print options, and setting new photo print option defaults.
User Guide
41
Memory Card and PictBridge
The final step in using a proof sheet is to scan the completed sheet you have placed on
the scanner glass.
Chapter 6
You access and set photo print options from the Photo Menu available through the
control panel.
Tip You can also use the HP Image Zone software to set photo print options. For
more information, see the HP Image Zone Help.
Use the print options menu to set photo print options
The Print Options menu gives you access to a variety of settings that affect the way
photos print, including number of copies, paper types, and more. The default
measurements and sizes vary according to country/region.
Memory Card and PictBridge
1
2
3
Insert a memory card into the appropriate slot on your HP all-in-one.
In the Photo area, press Photo Menu.
The Photo Menu appears.
Press 1 to access the Print Options menu, and then press the number next to the
setting you want to change.
Setting
Description
1. Number of Copies
Lets you set the number of copies to be printed.
2. Image Size
Lets you set the size at which you want the image
printed. Most choices are self-explanatory, but two
require some explanation: Fill Entire Page and Fit to
Page.
The Fill Entire Page setting scales the image to cover
all of the output paper without any white border area.
Some cropping may occur. Fit to Page scales the image
to cover as much of the page as possible while keeping
the original aspect ratio without cropping. The image is
centered on the page and is surrounded by a white
border.
42
3. Paper Size
Lets you select the paper size for the current print job.
The Automatic setting defaults to a large (letter or A4)
and small 10 by 15 cm (4 by 6 inch) paper size that
varies by country/region. When Paper Size and Paper
Type are both set to Automatic, the HP all-in-one
selects the best print options for the current print job.
The other Paper Size settings let you override the
automatic settings.
4. Paper Type
Lets you select the paper type for the current print job.
The Automatic setting lets the HP all-in-one detect and
set the paper type automatically. When Paper Size and
Paper Type are both set to Automatic, the HP all-inone selects the best options for the current print job. The
other Paper Type settings let you override the automatic
settings.
HP PSC 2350 series all-in-one
Setting
Description
5. Layout Style
Lets you select one of three layout styles for the current
print job.
The Paper Saver layout fits as many photos on the
paper as possible, rotating and cropping photos if
necessary.
The Album layouts keep the orientation of the original
photos. Album (Portrait Page) and Album (Landscape
Page) refer to the orientation of the page, not the photos
themselves. Some cropping might occur.
Lets you enable or disable automatic digital sharpening
of photos. Smart Focus affects only printed photos. It
does not change the appearance of photos on the color
graphics display or the actual image file on the memory
card. Smart Focus is enabled by default.
7. Digital Flash
Lets you make dark photos appear lighter. Digital Flash
affects only printed photos. It does not change the
appearance of photos on the color graphics display or
the actual image file on the memory card. Digital Flash
is turned off by default.
8. Set New Defaults
Lets you save the current Print Options settings as the
new defaults.
Change print options
You change each of the Print Options menu settings in the same general way.
1
2
In the Photo area, press Photo Menu, 1, and then press the number next to the
setting you want to change. You can scroll through the Print Options menu by
on the control panel to see all the options.
pressing
The currently selected option is highlighted, and its default setting (if any) appears
below the menu, at the bottom of the color graphics display.
Make the change to the setting, and then press OK.
Note In the Photo area, Photo Menu again to exit the Print Options menu and
return to the photo display.
For information on setting default photo print options, see Set new photo print options
defaults.
Set new photo print options defaults
You can change the photo print options defaults from the control panel.
1
2
User Guide
In the Photo area, press Photo Menu, and then press 1.
The Print Options menu appears.
Make changes to any options as needed.
43
Memory Card and PictBridge
6. Smart Focus
Chapter 6
3
The Print Options menu reappears when you confirm a new setting for any
option.
Press 8 when the Print Options menu is showing, and then press OK when
prompted to set new defaults.
All the current settings become the new defaults.
Use the edit features
The HP all-in-one offers several basic editing controls that you can apply to the image
currently displayed on the color graphics display. These controls include brightness
adjustment, special color effects, and more.
Memory Card and PictBridge
You can apply these editing controls on the photo currently being viewed. The edits
apply to printing and viewing only; they are not saved to the image itself.
1
2
In the Photo area, press Photo Edit.
The Photo Edit menu appears.
Select the Edit option you want to use by pressing the corresponding number.
Edit Option
Purpose
1. Zoom
Press 1 to zoom out and 5 to zoom in to view the image
at different sizes.
2. Rotate
Press 0 to rotate the image 90 degrees clockwise.
3. Photo Brightness
Lets you make the displayed image lighter or darker.
Press to make the image darker. Press to make it
lighter.
4. Color Effect
Displays a menu of special color effects you can apply to
the image. No Effect leaves the image untouched.
Sepia applies a brown tone found in photos from the
1900s. Antique is similar to Sepia, but with pale colors
added so the image looks hand-tinted. Black & White
provides the same output as if you pressed Start Black.
5. Frame
Lets you apply a frame and frame color to the current
image.
6. Redeye
Lets you remove red eye from photos. On makes red
eye removal active. Off turns red eye removal off. The
default is Off.
Print photos directly from a memory card
You can insert a memory card in your HP all-in-one and use the control panel to print
photos. For information on printing photos on your HP all-in-one from a PictBridgecompatible camera, see Print photos from a PictBridge-compatible digital camera.
This section contains information on the following topics: printing individual photos,
creating borderless photos, and deselecting photos.
44
HP PSC 2350 series all-in-one
Note When printing photos, you should select options for the correct paper type and
photo enhancement. For more information, see Set photo print options. You
might also want to use the photo print cartridge for superior print quality. For
more information, see Use a photo print cartridge.
You can do more than print your photos if you use the HP Image Zone software. This
software lets you use photos for iron-on transfers, posters, banners, stickers, and other
creative projects. For more information, see the onscreen HP Image Zone Help file
that came with your software.
Print individual photos
You can print photos directly from the control panel without using a proof sheet.
2
3
4
Insert the memory card into the appropriate slot on your HP all-in-one.
The status light next to the memory card slots lights up.
Load 10 by 15 cm ((4 by 6 inch)) photo paper in the input tray.
Display a photo on the color graphics display and press OK to select it for printing. A
selected photo bears a checkmark. Use or to move backward or forward
through the photos, one photo at a time. Press and hold or to move rapidly
through the photos.
In the Photo area, press Print Photos to print the selected photos.
Create borderless prints
An exceptional feature of your HP all-in-one is its ability to turn photos on a memory
card into professional, borderless prints.
1
2
3
Insert the memory card into the appropriate slot on your HP all-in-one.
The status light next to the memory card slots lights up.
Display a photo on the color graphics display and press OK to select it for printing. A
selected photo bears a checkmark. Use or to move backward or forward
through the photos, one photo at a time. Press and hold or to move rapidly
through the photos.
Load 10 by 15 cm (4 by 6 inch) photo paper face down in the right back corner of
the paper tray and adjust the paper guide.
Tip If the photo paper you are using has perforated tabs, load the photo paper so
that the tabs are closest to you.
4
In the Photo area, press Print Photos to print the selected photos as borderless
prints.
Deselect photos
You can deselect photos from the control panel.
➔
Do one of the following:
–
–
User Guide
Press OK to deselect the currently selected photo shown in the display.
Press Cancel to deselect all photos and return to the idle screen.
45
Memory Card and PictBridge
1
Chapter 6
Print photos from a PictBridge-compatible digital camera
The HP all-in-one supports the PictBridge standard, which lets you connect any
PictBridge-compatible camera to the camera port and print JPEG photos contained on
the memory card in the camera.
1
2
3
Make sure the HP all-in-one is turned on and that the initialization process is
finished.
Connect your PictBridge-compatible digital camera to the camera port on the front
of your HP all-in-one using the USB cable supplied with your camera.
Turn on your camera and make sure it is in PictBridge mode.
Memory Card and PictBridge
Note When the camera is connected correctly, the status light next to the memory card
slots is illuminated. The status light blinks green when printing from the camera.
If the camera is not PictBridge-compliant or is not in PictBridge mode, the status
light blinks amber and an error message displays on your computer monitor (if
you have the HP all-in-one software installed). Disconnect the camera, correct
the problem on the camera and reconnect. For more information about
PictBridge camera port troubleshooting, see theTroubleshooting Help that
came with your HP Image Zone software.
After you successfully connect your PictBridge-compliant camera to the HP all-in-one,
you can print your photos. Make sure the size of the paper loaded in the HP all-in-one
matches the setting on your camera. If the paper size setting on your camera is set to
the default, the HP all-in-one uses the paper that is currently loaded in the input tray.
Refer to the user guide that came with your camera for detailed information on printing
from the camera.
Tip If your digital camera is an HP model that does not support PictBridge, you can
still print directly to the HP all-in-one. Connect the camera to the USB port on the
back of the HP all-in-one instead of to the camera port. This works with HP digital
cameras only.
Print the current photo
You can use the Print Photos button to print the photo currently being viewed on the
color graphics display.
1
2
3
Insert the memory card into the appropriate slot on your HP all-in-one.
Navigate to a photo you want to print.
In the Photo area, press Print Photos to print the photo using the current settings.
Print a DPOF file
The Digital Print Order Format (DPOF) is an industry-standard file that can be created
by some digital cameras. Camera-selected photos are photos you marked for printing
with your digital camera. When you select photos with your camera, the camera creates a
DPOF file that identifies which photos have been tagged for printing. Your HP all-in-one
can read the DPOF file from the memory card so you do not have to reselect the photos
to print.
46
HP PSC 2350 series all-in-one
Note Not all digital cameras allow you to tag your photos for printing. See your digital
camera documentation to see if it supports DPOF. Your HP all-in-one supports
DPOF file format 1.1.
When you print camera-selected photos, the HP all-in-one print settings do not apply;
the settings in the DPOF file for photo layout and number of copies override those of
your HP all-in-one.
The DPOF file is stored by the digital camera on a memory card and specifies the
following information:
Which photos to print
The quantity of each photo to print
Rotation applied to a photo
Cropping applied to a photo
Index printing (thumbnails of selected photos)
To print camera-selected photos
1
2
Insert the memory card into the appropriate slot on your HP all-in-one. If there are
DPOF-tagged photos, the Print DPOF Photos prompt appears on the color
graphics display.
Do one of the following:
–
–
Press 1 to print all DPOF-tagged photos on the memory card.
Press 2 to bypass DPOF printing.
Use the slide show feature
You can use the Slide Show option on the Photo Menu to view all the photos on a
memory card as a slide show.
View or print photos in a slide show
You can view or print photos displayed in a slide show using the Slide Show feature of
the HP all-in-one.
To view a slide show
1
2
3
4
Insert the memory card into the appropriate slot on your HP all-in-one.
The status light next to the memory card slots lights up.
In the Photo area, press Photo Menu to display the Photo Menu.
Press 3 to start the slide show.
Press Cancel to end the slide show.
To print the currently displayed photo in a slide show
1
2
User Guide
When the photo you want to print appears on the color graphics display, press
Cancel to cancel the slide show.
In the Photo area, press Print Photos to print the photo using the current settings.
47
Memory Card and PictBridge
●
●
●
●
●
Chapter 6
Share photos through HP Instant Share
The HP all-in-one and its software can help you share photos with friends and family
members using a technology called HP Instant Share. You can use HP Instant Share
to:
●
●
●
Share photos with friends and relatives through e-mail.
Create online albums.
Order printed photos online.
Memory Card and PictBridge
In order to take full advantage of the HP Instant Share features available from the
control panel of your HP all-in-one, you must set up HP Instant Share on your HP allin-one. For information on setting up HP Instant Share on your HP all-in-one, see Use
HP Instant Share.
For more information on using HP Instant Share, see the HP Image Zone Help that
came with the software.
Use the HP Image Zone
You can use the HP Image Zone for viewing and editing image files. You can also print
images, send images by e-mail or fax to family and friends, upload images to a
website, or use images in fun and creative printing projects. The HP software lets you
do all this and much more. Explore the software to take full advantage of the features of
your HP all-in-one.
For more information on using HP Image Zone, see the HP Image Zone Help file that
came with your software.
For Windows: If you want to open the HP Image Zone at a later time, open the
HP Director and click the HP Image Zone icon.
For a Macintosh OS earlier than OS X v10.1.5, including OS 9: If you want to open
the HP Gallery component of the HP Image Zone software at a later time, select the
HP Director icon on your desktop.
For a Macintosh OS X v10.1.5 or later: If you want to open the HP Gallery
component of the HP Image Zone software at a later time, select HP Director in the
Dock. The HP Image Zone window opens. Select the Services tab, and then select
HP Gallery.
48
HP PSC 2350 series all-in-one
7
Use the copy features
The HP all-in-one allows you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the
size of an original to fit a specific paper size, adjust the darkness and color intensity of
the copy, and use special features to make high-quality copies of photos, including 10
by 15 cm (4 by 6 inch) borderless copies.
This chapter provides instructions for increasing copy speed, enhancing copy quality,
setting the number of copies to print, guidelines for choosing the best paper type and
size for your job, making posters, and making iron-on transfers.
Tip For the best copy performance on standard copy projects, set the paper size to
Letter or A4, the paper type to Plain Paper, and the copy quality to Fast.
For information on setting the paper size, see Set the copy paper size.
For information on setting the paper type, see Set the copy paper type.
For information on setting the copy quality, see Increase copy speed or quality.
You can learn how to perform photo copy projects, such as making borderless copies
of photos, enlarging and reducing the copies of photos to suit your preference, making
multiple copies of photos on a page, and making quality enhancements to copies of
faded photos.
Make a 10 by 15 cm (4 by 6 inch) borderless copy of a photo.
Use the copy features
Copy a 10 by 15 cm (4 by 6 inch) photo onto a full-size page.
Copy a photo several times on one page.
Enhance light areas of your copy.
Set the copy paper size
You can set the paper size on your HP all-in-one. The paper size you select should
match what is loaded in your paper tray. The default paper size setting for copying is
Automatic, which causes the HP all-in-one to detect the size of paper in the paper
tray.
User Guide
Paper type
Suggested paper size settings
Copier, multi-purpose, or plain papers
Letter or A4
Inkjet papers
Letter or A4
Iron-on transfers
Letter or A4
49
Chapter 7
(continued)
Paper type
Suggested paper size settings
Letterhead
Letter or A4
Photo papers
4 x 6 in. (with tab), 5 x 7 in., letter, A4, or
appropriate listed size
Borderless photo (4 x 6 in., letter, A4, or
appropriate listed size)
Hagaki cards
Hagaki card
Borderless Hagaki card
Transparency films
Letter or A4
To set the paper size from the control panel
1
2
3
Press Copy Menu, and then press 3.
This displays the Copy Menu and then selects Paper Size.
until the appropriate paper size appears.
Press
Press OK to choose the displayed paper size.
Set the copy paper type
You can set the paper type on your HP all-in-one. The default paper type setting for
copying is Automatic, which causes the HP all-in-one to detect the type of paper in the
paper tray.
Use the copy features
If you copy onto special papers, or if you experience poor print quality by using the
Automatic setting, you can set the paper type manually from the Copy Menu.
To set the paper type from the control panel
1
2
Press Copy Menu, and then press 4.
This displays the Copy Menu and then selects Paper Type.
Press
to highlight a paper type setting, and then press OK.
Refer to the following table to determine which paper type setting to choose based on
the paper loaded in the paper tray.
50
Paper type
Control panel setting
Copier paper or letterhead
Plain Paper
HP Bright White Paper
Plain Paper
HP Premium Plus Photo Paper, Glossy
Premium Photo
HP Premium Plus Photo Paper, Matte
Premium Photo
HP Premium Plus 4 by 6 inch Photo Paper
Premium Photo
HP Photo Paper
Photo Paper
HP Everyday Photo Paper
Everyday Photo
HP PSC 2350 series all-in-one
(continued)
Paper type
Control panel setting
HP Everyday Photo Paper, Semi Gloss
Everyday Matte
Other photo paper
Other Photo
HP Iron-On Transfer (for color fabrics)
Iron-On
HP Iron-On Transfer (for light or white fabrics)
Iron-On Mirrored
HP Premium Paper
Premium Inkjet
Other inkjet paper
Premium Inkjet
HP Professional Brochure & Flyer Paper (Glossy) Brochure Glossy
HP Professional Brochure & Flyer Paper (Matte)
Brochure Matte
HP Premium or Premium Plus Inkjet
Transparency Film
Transparency
Other transparency film
Transparency
Plain Hagaki
Plain Paper
Glossy Hagaki
Premium Photo
L (Japan only)
Premium Photo
Increase copy speed or quality
●
●
●
Normal delivers high-quality output and is the recommended setting for most of
your copying. Normal copies faster than Best.
Best produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies more slowly than
the other quality settings.
Fast copies faster than the Normal setting. The text is comparable to the quality of
the Normal setting, but the graphics might be lower quality. The Fast setting uses
less ink and extends the life of your print cartridges.
To change the copy quality from the control panel
1
2
3
4
5
User Guide
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
Press Copy Menu, and then press 5.
This displays the Copy Menu and then selects Copy Quality.
Press
to highlight a quality setting, and then press OK.
Press Start Copy Black or Start Copy Color.
51
Use the copy features
The HP all-in-one provides three options that affect copy speed and quality.
Chapter 7
Change default copy settings
To set default copy settings from the control panel
1
2
3
Make any needed changes to the settings in the Copy Menu.
Press 9 to select Set New Defaults from the Copy Menu.
Press OK to accept the settings as the new default settings.
The settings you specify here are only saved on the HP all-in-one itself. They do not
adjust the settings in the software. You can save your most frequently used settings by
using the HP Image Zone software that came with your HP all-in-one. For more
information, see the onscreen HP Image Zone Help.
Make multiple copies of the same original
You can set the number of copies that you want to print by using the Number of
Copies option in the Copy Menu.
To make multiple copies of an original from the control panel
1
2
3
Use the copy features
4
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
Press Copy Menu, and then press 1.
This displays the Copy Menu and then selects Number of Copies.
Press or use the keypad to enter the number of copies, up to the maximum, and
then press OK.
(The maximum number of copies varies by model.)
Tip If you hold down either of the arrow buttons, the number of copies changes by
increments of 5 to make it easier to set a large number of copies.
5
Press Start Copy Black or Start Copy Color.
In this example, the HP all-in-one makes six copies of the original 10 by 15 cm (4
by 6 inch) photo.
Copy a two-page black-and-white document
You can use the HP all-in-one to copy a single- or multiple-page document in color or
black and white. In this example, the HP all-in-one is used to copy a two-page blackand-white original.
52
HP PSC 2350 series all-in-one
To copy a two-page document from the control panel
1
2
3
4
5
6
Make sure you have paper loaded in the paper tray.
Load the first page of your original face down on the right front corner of the glass.
Press Copy, if not already lit.
Press Start Copy Black.
Remove the first page from the glass and load the second page.
Press Start Copy Black.
Make a 10by 15cm (4by 6inch) borderless copy of a photo
For the best quality when copying a photo, load photo paper in the paper tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tricolor and photo print cartridges installed, you have a six-ink system. For more
information, see Use a photo print cartridge.
To copy a photo from the control panel
1
Load 10 by 15 cm (4 by 6 inch) photo paper in the paper tray.
2
3
4
5
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
Press Copy Menu.
This displays the Copy Menu.
Press 2, and then press 3.
This displays the Reduce/Enlarge menu, and then selects Fill Entire Page.
Press Start Copy Color.
The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your
original photo, as shown below.
User Guide
53
Use the copy features
Warning In order to make a borderless copy, you must have photo paper
(or other specialty paper) loaded. If the HP all-in-one detects plain paper in
the input tray, it will not make a borderless copy. Instead, your copy will
have borders.
Chapter 7
Tip If the output is not borderless, then set the paper size to 5x7 Borderless or
4x6 Borderless, set the paper type to Photo Paper, set the Photo
enhancement, and then try again.
For more information on how to set the paper size, see Set the copy paper
size.
For information on how to set the paper type, see Set the copy paper type.
For information on how to set the Photo enhancement, see Enhance light
areas of your copy.
Copy a 10by 15cm (4by 6inch) photo onto a full-size
page
You can use the Fill Entire Page setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the paper tray. In this example, Fill Entire
Page is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a full-size
borderless copy. When copying a photo, you might want to use the photo print cartridge
for superior print quality. With the tri-color and photo print cartridges installed, you have a
six-ink system. For more information, see Use a photo print cartridge.
Use the copy features
Note In order to achieve a borderless print without changing the proportions of the
original, the HP all-in-one might crop some of the image around the margins. In
most cases, this cropping will not be noticeable.
To copy a photo onto a full-size page from the control panel
1
Load letter or A4 photo paper in the paper tray.
Warning In order to make a borderless copy, you must have photo paper
(or other specialty paper) loaded. If the HP all-in-one detects plain paper in
the input tray, it will not make a borderless copy. Instead, your copy will
have borders.
2
3
4
5
54
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
Press Copy Menu to display the Copy Menu.
Press 2, and then press 3.
This displays the Reduce/Enlarge menu and then selects Fill Entire Page.
Press Start Copy Color.
HP PSC 2350 series all-in-one
Tip If the output is not borderless, then set the paper size to Letter or A4, set the
paper type to Photo Paper, set the Photo enhancement, and then try again.
For more information on how to set the paper size, see Set the copy paper
size.
For information on how to set the paper type, see Set the copy paper type.
For information on how to set the Photo enhancement, see Enhance light
areas of your copy.
Copy a photo several times on one page
You can print multiple copies of an original on one page by selecting an image size from
the Reduce/Enlarge option in the Copy Menu.
After you select one of the available sizes, you might be prompted whether you want to
print multiple copies of the photo to fill the paper you have loaded in the paper tray.
To copy a photo several times on one page from the control panel
3
4
5
6
7
Make sure you have paper loaded in the paper tray.
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
Press Copy Menu to display the Copy Menu.
Press 2, and then press 5.
This displays the Reduce/Enlarge menu and then selects Image Sizes.
to highlight the size in which you want to copy the photo, and then press
Press
OK.
Depending on the image size you select, the Many on Page? prompt might
appear to determine whether you want to print multiple copies of the photo to fill the
paper in the paper tray, or just one copy.
Some larger sizes do not prompt you for a number of images. In this case, only one
image is copied to the page.
If the Many on Page? prompt appears, select Yes or No, and then press OK.
Press Start Copy Black or Start Copy Color.
Resize an original to fit onto letter or A4paper
If the image or text on your original fills the entire sheet with no margins, use the Fit to
Page feature to reduce your original and prevent unwanted cropping of the text or
images at the edges of the sheet.
User Guide
55
Use the copy features
1
2
Chapter 7
Tip You can also use Fit to Page to enlarge a small photo to fit within the printable
area of a full-size page. In order to do this without changing the proportions of the
original or cropping the edges, the HP all-in-one might leave an uneven amount of
white space around the edges of the paper.
To resize a document from the control panel
1
2
3
4
5
6
7
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
Press Copy Menu, and then press 3.
This displays the Copy Menu and then selects Paper Size.
Press
to highlight Letter or A4, as appropriate, and then press OK.
Press 2 to select Reduce/Enlarge from the Copy Menu.
to highlight Fit to Page, and then press OK.
Press
Press Start Copy Black or Start Copy Color.
Copy a faded original
Use the copy features
You can use the Lighter/Darker option to adjust the lightness and darkness of the
copies you make. You can also adjust the color intensity to make colors on your copy
more vivid or more subtle.
To copy a faded original from the control panel
1
2
3
4
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
Press Copy Menu, and then press 6.
This displays the Copy Menu and then selects Lighter/Darker. The range of
Lighter/Darker values appears as a scale on the color graphics display.
Press to darken the copy, and then press OK.
Note You can also press
5
6
Press 8 to select Color Intensity from the Copy Menu.
The range of color intensity values appears as a scale on the color graphics
display.
Press to make the image more vivid, and then press OK.
Note You can also press
7
56
to lighten the copy.
to make the image more pale.
Press Start Copy Black or Start Copy Color.
HP PSC 2350 series all-in-one
Copy a document that has been faxed several times
You can use the Enhancements feature to adjust the quality of text documents by
sharpening edges of black text or adjust photographs by enhancing light colors that
might otherwise appear white.
The Mixed enhancement is the default option. Use the Mixed enhancement to sharpen
edges of most originals.
To copy a blurred document from the control panel
1
2
3
4
5
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
Press Copy, and then press 7.
This displays the Copy Menu and then selects Enhancements.
to highlight the Text enhancement setting, and then press OK.
Press
Press Start Copy Black or Start Copy Color.
Tip If any of the following occur, turn off Text enhancement by selecting Photo or
None:
●
●
●
●
Stray dots of color surround some text on your copies
Large, black typefaces look splotchy (not smooth)
Thin, colored objects or lines contain black sections
Horizontal grainy or white bands appear in light- to medium-gray areas
Enhance light areas of your copy
●
●
●
●
Stray dots of color surround some text on your copies
Large, black typefaces look splotchy (not smooth)
Thin, colored objects or lines contain black sections
Horizontal grainy or white bands appear in light- to medium-gray areas
To copy an overexposed photo from the control panel
1
2
3
4
5
User Guide
Make sure you have paper loaded in the paper tray.
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
Press Copy Menu, and then press 7.
This displays the Copy Menu and then selects Enhancements.
Press
to highlight the Photo enhancement setting, and then press OK.
Press Start Copy Color.
57
Use the copy features
You can use Photo enhancements to enhance light colors that might otherwise appear
white. You can also use Photo enhancements to eliminate or reduce any of the
following that might occur when copying with Text enhancements:
Chapter 7
It is easy to set Enhancement settings for photos and other documents you copy by
using the HP Image Zone software that came with your HP all-in-one. With one click of
your mouse button, you can set a photo to copy with Photo enhancements, a text
document to copy with Text enhancements, or a document that contains both images
and text to copy with both Photo and Text enhancements turned on. For more
information, see the onscreen HP Image Zone Help.
Make a poster
You can use the Poster feature to create an enlarged copy of your original in sections
and assemble them into a poster.
1
2
Use the copy features
3
4
5
6
Make sure you have paper loaded in the paper tray.
Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
Press Copy Menu to display the Copy Menu.
Press 2, and then press 6.
This displays the Reduce/Enlarge menu and then selects Poster.
to highlight a page width for the poster, and then press OK.
Press
The default poster size is two pages wide.
Press Start Copy Black or Start Copy Color.
After you select the poster width, the HP all-in-one adjusts the length automatically
to maintain the proportions of the original.
Tip If the original cannot be enlarged to the selected poster size because it exceeds
the maximum zoom percentage, an error message appears that tells you to try a
smaller width. Select a smaller poster size and make the copy again.
You can be even more creative with your photos by using the HP Image Zone software
that came with your HP all-in-one. For more information, see the onscreen HP Image
Zone Help.
Prepare a color iron-on transfer
You can copy an image or text onto an iron-on transfer, then iron it onto a T-shirt, pillow
cover, place mat, or other piece of fabric.
58
HP PSC 2350 series all-in-one
Tip Practice applying a T-shirt transfer on an old garment first.
1
2
3
4
Load the iron-on transfer paper in the paper tray.
Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
Press Copy Menu, and then press 4.
This displays the Copy Menu and then selects Paper Type.
to highlight Iron-On or Iron-On Mirrored, and then press OK.
Press
Note Select Iron-On as the paper type for dark-colored fabrics, and Iron-On
Mirrored for white and light-colored fabrics.
5
Press Start Copy Black or Start Copy Color.
Note When you select Iron-On Mirrored as the paper type, the HP all-in-one
automatically copies a mirror image of your original so that it will appear
properly when you iron it onto fabric.
Stop copying
➔
To stop copying, press Cancel on the control panel.
Use the copy features
User Guide
59
Use the copy features
Chapter 7
60
HP PSC 2350 series all-in-one
8
Use the scan features
Scanning is the process of converting text and pictures into an electronic format for
your computer. You can scan just about anything: photos, magazine articles, text
documents, and even 3D objects, as long as you are careful not to scratch the glass on
your HP all-in-one. Scanning to a memory card makes your scanned images even more
portable.
You can use the scanning features of your HP all-in-one to do the following:
●
●
●
●
Scan text from an article into your word processor and quote it in a report.
Print business cards and brochures by scanning a logo and using it in your
publishing software.
Send photos to friends and relatives by scanning your favorite prints and including
them in e-mail messages.
Create a photographic inventory of your house or office, or archive treasured
photos in an electronic scrapbook.
Note Scanning text (also known as optical character recognition or OCR) lets you
bring the content of magazine articles, books, and other printed matter into your
favorite word processor (and many other programs) as fully editable text.
Learning to do OCR right is important if you want to obtain the best results. Do
not expect scanned text documents to be letter-perfect the first time you use
your OCR software. Using OCR software is an art that takes time and practice to
master. For more information about scanning documents, especially documents
containing both text and graphics, see the documentation that came with your
OCR software.
To use the scan features, your HP all-in-one and computer must be connected and
turned on. The HP all-in-one software must also be installed and running on your
computer prior to scanning. To verify that the HP all-in-one software is running on a
Windows PC, look for the HP all-in-one icon in the system tray at the lower right side of
the screen, near the time. On a Macintosh, the HP all-in-one software is always
running.
Note Closing the HP Windows system tray icon can cause your HP all-in-one to lose
some of its scan functionality and result in the No Connection error message. If
this happens, you can restore full functionality by restarting your computer or by
starting the HP Image Zone software.
For information about how to scan from the computer, and how to adjust, resize, rotate,
crop, and sharpen your scans, see the onscreen HP Image Zone Help that came with
your software.
Scan to an application
You can scan originals placed on the glass directly from the control panel.
User Guide
61
Scan
This chapter contains information on: sending a scan to and from different destinations,
and adjusting the preview image.
Chapter 8
Note The menus shown in this section may vary in content depending on your
computer's operating system and which applications you set up as scan
destinations in the HP Image Zone.
1
2
3
4
Load the original face down on the right front corner of the glass.
In the Scan area, press Scan To.
The Scan To menu appears, listing destinations, including applications, for
anything you scan. The default destination is whichever one you selected the last
time you used this menu. You designate which applications and other destinations
appear on the Scan To menu by using the HP Image Zone on your computer.
To select an application to receive the scan, press its number on the control panel
or use the arrow keys to highlight it and then press OK or Start Scan.
A preview image of the scan appears in the HP Scan window on the computer,
where you can edit it.
For more information about editing a preview image, see the onscreen HP Image
Zone Help that came with your software.
Make any edits to the preview image in the HP Scan window. When you have
finished, click Accept.
The HP all-in-one sends the scan to the selected application. For example, if you
chose the HP Image Zone, it automatically opens and displays the image.
The HP Image Zone has many tools that you can use to edit your scanned image. You
can improve the overall image quality by adjusting the brightness, sharpness, color
tone, or saturation. You can also crop, straighten, rotate, or resize the image. When the
scanned image looks just the way you want it, you can open it in another application,
send it through e-mail, save it to a file, or print it. For more information about using the
HP Image Zone, see the HP Gallery section in the onscreen HP Image Zone Help.
Send a scan to an HP Instant Share destination
HP Instant Share lets you share your photos with family and friends through e-mail
messages, online photo albums, and high-quality prints.
For information on using HP Instant Share, see the onscreen HP Image Zone Help.
Send a scan to a memory card
You can send the scanned image as a JPEG image to the memory card that is currently
inserted in one of the memory card slots on the HP all-in-one. This enables you to use
the memory card features to generate borderless prints and album pages from the
scanned image. It also enables you to access the scanned image from other devices
that support the memory card.
Scan
1
2
3
Load the original face down on the right front corner of the glass.
In the Scan area, press Scan To.
A Scan To menu appears, listing various options or destinations. The default
destination is whichever one you selected the last time you used this menu.
Press the number next to Memory Card.
The HP all-in-one scans the image and saves the file to the memory card in the
JPEG format.
62
HP PSC 2350 series all-in-one
Stop scanning
➔
To stop scanning, press Cancel on the control panel, or in HP Image Zone, click
Cancel.
Scan
User Guide
63
Scan
Chapter 8
64
HP PSC 2350 series all-in-one
Print from your computer
The HP all-in-one can be used with any software application that allows printing. The
instructions vary slightly depending whether you are printing from a Windows PC or a
Macintosh. Make sure you follow the instructions for your operating system in this
chapter.
In addition to the printing capabilities described in this chapter, you can print special
print jobs such as borderless prints and newsletters; print images directly from a photo
memory card or from a digital camera that supports PictBridge; and use scanned
images in printing projects in the HP Image Zone.
●
●
For more information on printing from a memory card or digital camera, see Use a
memory card or PictBridge camera.
For more information on performing special print jobs or printing images in the
HP Image Zone, see the onscreen HP Image Zone Help.
Print from a software application
Most print settings are automatically handled by the software application you are
printing from or by HP ColorSmart technology. You need to change the settings
manually only when you change print quality, print on specific types of paper or
transparency film, or use special features.
To print from the software application you used to create your document
(Windows users)
1
2
3
4
5
Make sure you have paper loaded in the paper tray.
On the File menu in your software application, click Print.
Select the HP all-in-one as the printer.
If you need to change settings, click the button that opens the Properties dialog
box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, or Printer.
Select the appropriate options for your print job by using the features available in
the Paper/Quality, Finishing, Effects, Basics, and Color tabs.
Tip You can easily print your job with a set of default settings based on the type
of job you want to print. On the Printing Shortcuts tab, click a type of print
task in the What do you want to do? list. The default settings for that type of
print task are set, and summarized on the Printing Shortcuts tab. If
necessary, you can adjust the settings here, or you can make your changes
on the other tabs in the Properties dialog box.
6
7
Click OK to close the Properties dialog box.
Click Print or OK to begin printing.
To print from the software application you used to create your document
(Macintosh users)
1
User Guide
Make sure you have paper loaded in the paper tray.
65
Print from your computer
9
Chapter 9
Print from your computer
2
3
4
Select the HP all-in-one in the Chooser (OS 9), Print Center (OS 10.2 or earlier),
or Printer Setup Utility (OS 10.3 or later) before you begin printing.
From the File menu in your software application, choose Page Setup.
The Page Setup dialog box appears, allowing you to specify the paper size,
orientation, and scaling.
Specify the page attributes:
–
–
–
Choose the paper size.
Select the orientation.
Enter the scaling percentage.
Note For OS 9, the Page Setup dialog box also includes options to print a
mirrored (or reversed) version of the image, and to adjust the page margins
for two-sided printing.
5
6
7
8
Click OK.
From the File menu in your software application, choose Print.
The Print dialog box appears. If you are using OS 9, the General panel opens. If
you are using OS X, the Copies & Pages panel opens.
Change the print settings for each option in the pop-up menu, as appropriate for
your project.
Click Print to begin printing.
Change the print settings
You can customize the print settings of the HP all-in-one to handle nearly any print
task.
Windows users
Before you change print settings, you should decide if you want to change the settings
for the current print job only, or if you want to make the settings the defaults for all future
print jobs. How you display print settings depends on whether or not you want to apply
the change to all future print jobs or just to the current print job.
To change the print settings for all future jobs
1
2
In the HP Director, click Settings, point to Print Settings, and then click Printer
Settings.
Make changes to the print settings, and click OK.
To change the print settings for the current job
1
2
3
4
5
66
On the File menu in your software application, click Print.
Make sure the HP all-in-one is the selected printer.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, or Printer.
Make changes to the print settings, and click OK.
Click Print or OK in the Print dialog box to print the job.
HP PSC 2350 series all-in-one
Use the Page Setup and Print dialog boxes to change the settings for your print job.
Which dialog box you use depends on which setting you want to change.
To change the paper size, orientation, or scaling percentage
1
2
3
Select the HP all-in-one in the Chooser (OS 9), Print Center (OS 10.2 or earlier),
or Printer Setup Utility (OS 10.3 or later) before you begin printing.
From the File menu in your software application, choose Page Setup.
Make changes to the paper size, orientation, and scaling percentage settings, and
click OK.
To change all other print settings
1
2
3
Select the HP all-in-one in the Chooser (OS 9), Print Center (OS 10.2 or earlier),
or Printer Setup Utility (OS 10.3 or later) before you begin printing.
From the File menu in your software application, choose Print.
Make changes to the print settings, and click Print to print the job.
Stop a print job
Although you can stop a print job from either the HP all-in-one or the computer, we
recommend you stop it from the HP all-in-one for best results.
To stop a print job from the HP all-in-one
➔
User Guide
Press Cancel on the control panel. Look for the Print Cancelled message on the
color graphics display. If the message does not appear, press Cancel again.
67
Print from your computer
Macintosh users
Print from your computer
Chapter 9
68
HP PSC 2350 series all-in-one
10
Use HP Instant Share
HP Instant Share makes it easy to share photos with family and friends. Just scan a
photo or insert a memory card into the appropriate card slot on your HP all-in-one,
select one or more photos to share, select a destination for your photos, and then send
the photos on their way. You can even upload your photos to an online photo album or
an online photo finishing service. Availability of services varies by country/region.
With HP Instant Share E-mail, family and friends always get photos they can view -- no
more large downloads or images that are too big to open. An e-mail message with
thumbnail images of your photos is sent with a link to a secure Web page where family
and friends can easily view, share, print, and save the photos.
If your HP all-in-one is USB-connected, you can share photos with friends and relatives
using your device and the HP software installed on your computer. If you have a
Windows-based computer, use the HP Image Zone software; if you have a Macintosh,
use the HP Instant Share client application software.
Note A USB-connected device is an HP All-in-One that is connected to a computer by
means of a USB cable and relies on the computer for access to the Internet.
Use HP Instant Share to send images from your HP all-in-one to a destination of your
choice. The destination, for example, can be an e-mail address, an online photo album,
or an online photo finishing service. Availability of services varies by country/region.
Note You can also send images to a friend or relative's network-connected HP All-inOne or photo printer. To send to a device, you must have an HP Passport user ID
and password. The receiving device must be set up and registered with
HP Instant Share. You will also need to obtain the name the recipient assigned to
the receiving device. Further instructions are provided in step 6 in Send images
using your HP all-in-one.
Get started
You must have the following to use HP Instant Share with your HP all-in-one:
●
●
●
User Guide
An HP all-in-one connected to a computer with a USB cable
Internet access through the computer to which the HP all-in-one is connected
HP Image Zone software installed on your computer. Macintosh users will find that
the HP Instant Share client application software is also installed.
69
Use HP Instant Share
Overview
Chapter 10
Once you have set up your HP all-in-one and installed the HP Image Zone software,
you are ready to start sharing photos using HP Instant Share. For more information on
setting up your HP all-in-one, see the Setup Guide that came with your device.
Send images using your HP all-in-one
Images can be photos or scanned documents. Either can be shared with friends and
relatives using your HP all-in-one and HP Instant Share. Select photos from a memory
card or scan an image, press HP Instant Share on the control panel of your HP all-inone, and send your images to the destination of your choice. See the topics below for
detailed instructions.
Send photos from a memory card
Use HP Instant Share
Use your HP all-in-one to share photos immediately upon inserting a memory card.
Simply insert the memory card into the appropriate card slot, select one or more
photos, and then press Photo Menu on the control panel.
Note For more information on using a memory card, see Use a memory card or
PictBridge camera.
To send photos using the Photo Menu button
1
2
Make sure the memory card is inserted into the appropriate card slot on your
HP all-in-one.
Select one or more photos.
Note For more information on selecting photos, see Use a memory card or
PictBridge camera.
3
4
Press Photo Menu on the control panel of your HP all-in-one.
The Photo Menu appears on the color graphics display.
Press 4 to select HP Instant Share.
For Windows users, the HP Image Zone software opens on your computer. The
HP Instant Share tab appears. Thumbnails of your photos appear in the Selection
Tray. For more information on the HP Image Zone, see Use the HP Image Zone
in the onscreen help.
For Macintosh users, the HP Instant Share client application software opens on
your computer. Thumbnails of your photos appear in the HP Instant Share
window.
Note If you are using a Macintosh OS earlier than X v10.1.5 (including OS 9
v9.1.5), your photos are uploaded to the HP Gallery on your Macintosh.
Click E-mail. Send the photos as an e-mail attachment by following the
prompts on your computer screen.
5
Follow the steps appropriate for your operating system:
If you are using a Windows-based computer:
a
70
From either the Control or Work areas of the HP Instant Share tab, click the
link or icon of the service you want to use to send your photos.
HP PSC 2350 series all-in-one
Note If you click See All Services, you can choose from among all of the
services available in your country/region, for example: HP Instant
Share E-mail and Create Online Albums. Follow the onscreen
instructions.
b
The Go Online screen appears in the Work area.
Click Next and follow the onscreen instructions.
If you are using a Macintosh:
a
d
6
From the HP Instant Share E-mail service, you can:
–
–
–
–
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Web.
Open and maintain an e-mail address book. Click Address Book, register with
HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend or relative's network-connected device.
Enter the name assigned to the device by the recipient in the E-mail address
field followed by @send.hp.com. You will be prompted to sign in to HP Instant
Share with your HP Passport userid and password.
Note If you have not previously set up HP Instant Share, click I need an HP
Passport account on the Sign in with HP Passport screen. Obtain an
HP Passport user ID and password.
Send a scanned image
Share a scanned image by pressing Scan To on the control panel. To use Scan To,
place an image face down on the glass, select a destination to which you want to send
the image, and start the scan.
Note For more information on scanning an image, see Use the scan features.
To send a scanned image from your HP all-in-one
1
2
3
4
User Guide
Load your original face down on the right front corner of the glass.
Press Scan To on the control panel of your HP all-in-one.
The Scan To menu appears on the color graphics display.
Use the
and
arrows to highlight HP Instant Share.
Press OK or Start Scan to select the destination.
The image is scanned and uploaded to your computer.
For Windows users, the HP Image Zone software opens on your computer. The
HP Instant Share tab appears. A thumbnail of the scanned image appears in the
71
Use HP Instant Share
b
c
Make sure the photos you want to share display in the HP Instant Share
window.
Use the - button to remove photos, or the + button to add photos to the
window.
Click Continue and follow the onscreen instructions.
From the HP Instant Share services list, select the service you want to use to
send your photos.
Follow the onscreen instructions.
Chapter 10
Selection Tray. For more information on the HP Image Zone, see Use the HP
Image Zone in the onscreen help.
For Macintosh users, the HP Instant Share client application software opens on
your computer. A thumbnail of the scanned image appears in the HP Instant Share
window.
Note If you are using a Macintosh OS earlier than X v10.1.5 (including OS 9
v9.1.5), your photos are uploaded to the HP Gallery on your Macintosh.
Click E-mail. Send the scanned image as an e-mail attachment by following
the prompts on your computer screen.
5
Follow the steps appropriate for your operating system:
If you are using a Windows-based computer:
Use HP Instant Share
a
From either the Control or Work areas of the HP Instant Share tab, click the
link or icon of the service you want to use to send your scanned image.
Note If you click See All Services, you can choose from among all of the
services available in your country/region, for example: HP Instant
Share E-mail and Create Online Albums. Follow the onscreen
instructions.
b
The Go Online screen appears in the Work area.
Click Next and follow the onscreen instructions.
If you are using a Macintosh:
a
b
c
d
6
Make sure the scanned image you want to share displays in the HP Instant
Share window.
Use the - button to remove photos, or the + button to add photos to the
window.
Click Continue and follow the onscreen instructions.
From the HP Instant Share services list, select the service you want to use to
send your scanned image.
Follow the onscreen instructions.
From the HP Instant Share E-mail service, you can:
–
–
–
–
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Web.
Open and maintain an e-mail address book. Click Address Book, register with
HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend or relative's network-connected device.
Enter the name assigned to the device by the recipient in the E-mail address
field followed by @send.hp.com. You will be prompted to sign in to HP Instant
Share with your HP Passport userid and password.
Note If you have not previously set up HP Instant Share, click I need an HP
Passport account on the Sign in with HP Passport screen. Obtain an
HP Passport user ID and password.
72
HP PSC 2350 series all-in-one
Send images using your computer
In addition to using your HP all-in-one to send images through HP Instant Share, you
can use the HP Image Zone software installed on your computer to send images. The
HP Image Zone software lets you select and edit one or more images, and then access
HP Instant Share to select a service (for example, HP Instant Share E-mail) and send
your images. At a minimum, you can share images through the following:
●
●
●
●
HP Instant Share E-mail (send to an e-mail address)
HP Instant Share E-mail (send to a device)
Online Albums
Online photo finishing (availability varies by country/region)
Send images using the HP Image Zone software (Windows)
Note For more information on using the HP Image Zone software, see the onscreen
HP Image Zone Help.
To use the HP Image Zone software
1
2
Double-click the HP Image Zone icon on your desktop.
The HP Image Zone window opens on your computer. The My Images tab
appears in the window.
Select one or more images from the folder(s) in which they are stored.
For more information, see the onscreen HP Image Zone Help.
Note Use the HP Image Zone image editing tools to edit your images and achieve
the results you want. For more information, see the onscreen HP Image
Zone Help.
3
4
Click the HP Instant Share tab.
The HP Instant Share tab appears in the HP Image Zone window.
From either the Control or Work areas of the HP Instant Share tab, click the link
or icon of the service you want to use to send your scanned image.
Note If you click See All Services, you can choose from among all of the services
available in your country/region, for example: HP Instant Share E-mail and
Create Online Albums. Follow the onscreen instructions.
5
6
The Go Online screen appears in the Work area of the HP Instant Share tab.
Click Next and follow the onscreen instructions.
From the HP Instant Share E-mail service, you can:
–
–
–
–
User Guide
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Web.
Open and maintain an e-mail address book. Click Address Book, register with
HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend or relative's network-connected device.
Enter the name assigned to the device by the recipient in the E-mail address
73
Use HP Instant Share
Use the HP Image Zone software to share images with friends and relatives. Simply
open the HP Image Zone, select the images you want to share, and forward the images
using the HP Instant Share E-mail service.
Chapter 10
field followed by @send.hp.com. You will be prompted to sign in to HP Instant
Share with your HP Passport userid and password.
Note If you have not previously set up HP Instant Share, click I need an HP
Passport account on the Sign in with HP Passport screen. Obtain an
HP Passport user ID and password.
Send images using the HP Instant Share client application software
(Macintosh OS X v10.1.5and later)
Note Macintosh OS X v10.2.1 and v10.2.2 are not supported.
Use HP Instant Share
Use the HP Instant Share client application to share images with friends and relatives.
Simply open the HP Instant Share window, select the images you want to share, and
forward the images using the HP Instant Share E-mail service.
Note For more information on using the HP Instant Share client application software,
see the onscreen HP Image Zone Help.
To use the HP Instant Share client application
1
2
3
4
Select the HP Image Zone icon from the Dock.
The HP Image Zone opens on your desktop.
In the HP Image Zone, click the Services button at the top of the window.
A list of applications appears in the lower part of the HP Image Zone.
Choose HP Instant Share from the list of applications.
The HP Instant Share client application software opens on your computer.
Use the + button to add an image to the window, or the - button to remove an
image.
Note For more information on using the HP Instant Share client application
software, see the onscreen HP Image Zone Help.
5
6
7
8
9
Make sure the images you want to share display in the HP Instant Share window.
Click Continue and follow the onscreen instructions.
From the HP Instant Share services list, select the service you want to use to send
your scanned image.
Follow the onscreen instructions.
From the HP Instant Share E-mail service, you can:
–
–
–
–
Send an e-mail message with thumbnail images of your photos which can be
viewed, printed, and saved over the Web.
Open and maintain an e-mail address book. Click Address Book, register with
HP Instant Share, and create an HP Passport account.
Send your e-mail message to multiple addresses. Click the related link.
Send a collection of images to a friend or relative's network-connected device.
Enter the name assigned to the device by the recipient in the E-mail address
field followed by @send.hp.com. You will be prompted to sign in to HP Instant
Share with your HP Passport userid and password.
Note If you have not previously set up HP Instant Share, click I need an HP
Passport account on the Sign in with HP Passport screen. Obtain an
HP Passport user ID and password.
74
HP PSC 2350 series all-in-one
Share images using the HP Director (Macintosh OS earlier than X v10.1.5)
Note Macintosh OS 9 v9.1.5 and later and v9.2.6 and later are supported. Macintosh
OS X v10.0 and v10.0.4 are not supported.
Share images with anyone who has an e-mail account. Simply start the HP Director
and open the HP Gallery. Then create a new e-mail message using an e-mail
application installed on your computer.
Note For more information, see the HP Imaging Gallery section in the onscreen
HP Photo and Imaging Help.
To use the e-mail option within the HP Director
1
Display the HP Director menu:
2
Open the HP Photo and Imaging Gallery:
–
–
3
4
In OS X, select the HP Director icon from the Dock.
In OS 9, double-click the HP Director shortcut on your desktop.
Use HP Instant Share
–
–
In OS X, select HP Gallery from the Manage and Share section of the
HP Director menu.
In OS 9, click HP Gallery.
Select one or more images to share.
For more information, see the onscreen HP Photo and Imaging Help.
Click E-mail.
The e-mail program on your Macintosh opens.
Send the images as an e-mail attachment by following the prompts on your
computer screen.
User Guide
75
Use HP Instant Share
Chapter 10
76
HP PSC 2350 series all-in-one
11
Order supplies
You can order recommended types of HP paper and print cartridges online from the
HP website.
●
●
●
Order paper, transparency film, or other media
Order print cartridges
Order other supplies
Order paper, transparency film, or other media
To order media such as HP Premium Paper, HP Premium Plus Photo Paper,
HP Premium Inkjet Transparency Film, or HP Iron-On Transfer, go to www.hp.com. If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.
Order print cartridges
To order print cartridges for your HP all-in-one, go to www.hp.com. If prompted, choose
your country/region, follow the prompts to select your product, and then click one of the
shopping links on the page.
Your HP all-in-one supports the following print cartridges:
HP reorder number
HP black inkjet print cartridge
#94, 11 ml black print cartridge
HP tri-color inkjet print cartridge
#97, 14 ml color print cartridge
Order supplies
Print cartridges
#95, 7 ml color print cartridge
HP photo inkjet print cartridge
#99, 13 ml color photo print cartridge
Note Print cartridge reorder numbers vary by country/region. If the reorder numbers
listed in this guide do not match the numbers on the print cartridges currently
installed in your HP all-in-one, order new print cartridges with the same numbers
as those you currently have installed.
You can find out the reorder numbers for all the print cartridges your device
supports through the Printer Toolbox. In the Printer Toolbox, click the
Estimated Ink Levels tab, and then click Ink Cartridge Ordering Information.
You can also contact a local HP reseller or go to www.hp.com/support to confirm
the correct print cartridge reorder numbers for your country/region.
User Guide
77
Chapter 11
Order other supplies
To order other supplies, such as HP all-in-one software, a copy of the printed User
Guide, a Setup Guide, or other customer-replaceable parts, call the appropriate number
below:
●
●
In the U.S. or Canada, dial 1-800-HP-INVENT (1-800-474-6836).
In Europe, dial +49 180 5 290220 (Germany) or +44 870 606 9081 (U.K.).
To order HP all-in-one software in other countries/regions, call the phone number for
your country/region. The numbers listed below are current as of the publication date of
this guide. For a list of current ordering numbers, go to www.hp.com/support. If
prompted, choose your country/region, and then click Contact HP for information on
calling for technical support.
Country/region
Number for ordering
Asia Pacific (except for Japan)
65 272 5300
Australia
131047
Europe
+49 180 5 290220 (Germany)
+44 870 606 9081 (U.K.)
0800 441 147
South Africa
+27 (0)11 8061030
U.S. and Canada
1-800-HP-INVENT (1-800-474-6836)
Order supplies
New Zealand
78
HP PSC 2350 series all-in-one
12
Maintain your HP all-in-one
The HP all-in-one requires little maintenance. Sometimes you might want to clean the
glass and lid backing to remove surface dust and ensure that your copies and scans
remain clear. You will also need to replace, align, or clean your print cartridges
occasionally. This chapter provides instructions for keeping your HP all-in-one in top
working condition. Perform these simple maintenance procedures as necessary.
Clean the HP all-in-one
Fingerprints, smudges, hair, and other debris on the glass or lid backing slow down
performance and affect the accuracy of special features such as Fit to Page. To ensure
that your copies and scans remain clear, you might need to clean the glass and lid
backing. You might also want to dust the exterior of the HP all-in-one.
Clean the glass
Dirty glass from fingerprints, smudges, hair, and dust slows down performance and
affects the accuracy of features such as Fit to Page.
1
2
Turn off the HP all-in-one, unplug the power cord, and raise the lid.
Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
Warning Do not use abrasives, acetone, benzene, or carbon tetrachloride
on the glass; they can damage it. Do not place or spray liquid directly on the
glass; the liquid might seep under the glass and damage the device.
3
Dry the glass with a chamois or cellulose sponge to prevent spotting.
Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid
of the HP all-in-one.
1
2
Warning Do not use paper-based wipes, as these might scratch the
backing.
5
If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)
alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual
alcohol.
Warning Be careful not to spill alcohol on the glass or painted parts of the
HP all-in-one, as this might damage the device.
User Guide
79
Maintain your HP all-in-one
3
4
Turn off the HP all-in-one, unplug the power cord, and raise the lid.
Clean the white document backing with a soft cloth or sponge slightly moistened
with a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
Dry the backing with a chamois or soft cloth.
Chapter 12
Clean the exterior
Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the
case. The interior of the HP all-in-one does not require cleaning. Keep fluids away from
the control panel and the interior of the HP all-in-one.
Warning To avoid damage to painted parts of the HP all-in-one, do not use
alcohol or alcohol-based cleaning products on the control panel, lid, or other
painted parts of the device.
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to
replace a print cartridge. The ink supply level shows an estimate of the amount of ink
remaining in the print cartridges.
To check the ink levels from the control panel
➔
Look for two icons at the bottom of the color graphics display that represent the
levels of ink remaining in the two installed print cartridges.
–
–
–
A green icon represents an estimate of the amount of ink remaining in the tricolor print cartridge.
A black icon represents an estimate of the amount of ink remaining in the black
print cartridge.
An orange icon represents an estimate of the amount of ink remaining in the
photo print cartridge.
If you are using non-HP print cartridges or cartridges that have been refilled, or if
there is no print cartridge installed in one of the cartridge stalls, one or both icons
might not appear in the icon bar. The HP all-in-one cannot detect the amount of ink
remaining in non-HP print cartridges or cartridges that have been refilled.
If an icon shows a hollow ink drop, the print cartridge represented by that color icon
has very little ink remaining and will need to be changed soon. Replace the print
cartridge when the print quality starts to degrade.
For more information on the ink level icons on the color graphics display, see Color
graphics display icons.
Maintain your HP all-in-one
You can also check the estimated amount of ink remaining in your cartridges by using
the HP Image Zone software that came with your HP all-in-one. For information on
checking the ink levels from the HP Director, see the onscreen HP Image Zone Help
that came with your software.
Print a self-test report
If you are experiencing problems with printing, print a self-test report before you replace
the print cartridges. This report provides useful information on several aspects of your
device, including your print cartridges.
1
2
3
80
Load letter, A4, or legal unused plain white paper into the paper tray.
Press Setup.
Press 2, then press 1.
This displays the Print Report menu and then selects Self-Test Report.
HP PSC 2350 series all-in-one
The HP all-in-one prints a self-test report, which might indicate the source of the
printing problem. A sample of the ink test area of the report is shown below.
4
5
6
7
Make sure the test patterns are even and show a complete grid.
If more than a few lines in a pattern are broken, this might indicate a problem with
the nozzles. You might need to clean the print cartridges. For more information, see
Clean the print cartridges.
Make sure the lines of color extend across the page.
If the black line is missing, faded, streaked, or shows lines, this might indicate a
problem with the black or photo print cartridge in the right slot.
If any of the remaining three lines are missing, faded, streaked, or show lines, this
might indicate a problem with the tri-color print cartridge in the left slot.
Make sure the color blocks have even consistency and are representative of the
colors listed below.
You should see cyan, magenta, yellow, violet, green, and red color blocks.
If color blocks are missing, or if a block of color is muddy or does not match the
label indicated below the block, this might indicate that the tri-color print cartridge is
out of ink. You might need to replace the print cartridge. For more information on
replacing print cartridges, see Replace the print cartridges.
Check the color blocks and lines of color for streaking or white lines.
Note For examples of test patterns, lines of color, and color blocks from normal and
malfunctioning print cartridges, see the onscreen HP Image Zone Help that
came with your software.
Work with print cartridges
To ensure the best print quality from your HP all-in-one, you will need to perform some
simple maintenance procedures. This section provides guidelines for handling the print
cartridges and instructions for replacing, aligning, and cleaning the print cartridges.
User Guide
81
Maintain your HP all-in-one
Streaks might indicate clogged nozzles or dirty contacts. You might need to clean
the print cartridges. For more information on cleaning the print cartridges, see
Clean the print cartridges. Do not clean with alcohol.
Chapter 12
Handle the print cartridges
Before you replace or clean a print cartridge, you should know the part names and how
to handle the print cartridges.
1
Copper-colored contacts
2
Plastic tape with pink pull tab (must be removed before installing)
3
Ink nozzles under tape
Hold the print cartridges by their black plastic sides, with the label on top. Do not touch
the copper-colored contacts or the ink nozzles.
Warning Be careful not to drop the print cartridges. This can damage them,
making them unusable.
Replace the print cartridges
When the ink level for the print cartridge is low, a message appears on the color
graphics display.
Maintain your HP all-in-one
Note You can also check the ink levels by using the HP Director that came with the
HP Image Zone software on your computer. For more information, see Check
the estimated ink levels.
When you receive a low-ink warning message on the color graphics display, make sure
you have a replacement print cartridge available. You should also replace the print
cartridges when you see faded text or if you experience print quality issues related to
the print cartridges.
Tip You can also use these instructions to replace the black print cartridge with a
photo print cartridge for printing high-quality color photos.
To find out the reorder number for all the print cartridges that your HP all-in-one
supports, see Order print cartridges. To order print cartridges for your HP all-in-one, go
82
HP PSC 2350 series all-in-one
to www.hp.com. If prompted, choose your country/region, follow the prompts to select
your product, and then click one of the shopping links on the page.
To replace the print cartridges
1
Make sure the HP all-in-one is on.
Warning If the HP all-in-one is off when you lift the print-carriage access
door to access the print cartridges, the HP all-in-one will not release the
cartridges for changing. You might damage the HP all-in-one if the print
cartridges are not docked safely on the right side when you try to remove
them.
2
3
Open the print-carriage access door by lifting from the front center of the device,
until the door locks into place.
The print carriage moves to the far right side of the HP all-in-one.
1
Print-carriage access door
2
Print carriage
Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge
from the slot on the right.
Maintain your HP all-in-one
User Guide
83
Chapter 12
4
5
Maintain your HP all-in-one
6
1
Print cartridge slot for the tri-color print cartridge
2
Print cartridge slot for the black and photo print cartridges
Pull the print cartridge toward you out of its slot.
If you are removing the black print cartridge in order to install the photo print
cartridge, store the black print cartridge in the print cartridge protector. For more
information, see Use the print cartridge protector.
If you are removing the print cartridge because it is low or out of ink, recycle the
print cartridge. The HP Inkjet Supplies Recycling Program is available in many
countries/regions, and lets you recycle used print cartridges free of charge. For
more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html
Remove the new print cartridge from its packaging and, being careful to touch only
the black plastic, gently remove the plastic tape by using the pink pull tab.
1
Copper-colored contacts
2
Plastic tape with pink pull tab (must be removed before installing)
3
Ink nozzles under tape
Caution Do not touch the copper-colored contacts or ink nozzles.
Touching these parts can result in clogs, ink failure, and bad electrical
connections.
84
HP PSC 2350 series all-in-one
7
Slide the new print cartridge forward into the empty slot. Push the print cartridge
forward until it clicks into place.
If the print cartridge you are installing has a white triangle on its label, slide the
print cartridge into the slot on the left. The label for the slot is green with a solid
white triangle.
If the print cartridge you are installing has a white square or a white pentagon on its
label, slide the print cartridge into the slot on the right. The label for the slot is black
with a solid white square and a solid white pentagon.
8
Close the print-carriage access door.
You can optimize the quality of the color photos you print and copy with your HP all-inone by purchasing a photo print cartridge. Remove the black print cartridge and insert
the photo print cartridge in its place. With the tri-color print cartridge and photo print
cartridge installed, you have a six-ink system, which provides enhanced quality color
photos.
User Guide
85
Maintain your HP all-in-one
Use a photo print cartridge
Chapter 12
When you want to print regular text documents, swap the black print cartridge back in.
Use a print cartridge protector to keep your print cartridge secure when it is not being
used.
●
●
●
For more information on purchasing a photo print cartridge, see Order print
cartridges.
For more information on replacing print cartridges, see Replace the print cartridges.
For more information on using the print cartridge protector, see Use the print
cartridge protector.
Use the print cartridge protector
In some countries/regions, when you purchase a photo print cartridge, you also receive a
print cartridge protector. In other countries/regions, a print cartridge protector comes in
the box with your HP all-in-one.
The print cartridge protector is designed to keep a print cartridge secure and prevent it
from drying out when it is not being used. Whenever you remove a print cartridge from
the HP all-in-one with the intention of using it again later, store it in the print cartridge
protector. For example, store the black print cartridge in a print cartridge protector if you
are removing it so you can print high-quality photos with the photo and tri-color print
cartridges.
To insert a print cartridge into the print cartridge protector
➔
Slide the print cartridge into the print cartridge protector at a slight angle and snap
it securely into place.
To remove the print cartridge from the print cartridge protector
Press down and back on the top of the print cartridge protector to release the print
cartridge, then slide the print cartridge out of the print cartridge protector.
Maintain your HP all-in-one
➔
86
HP PSC 2350 series all-in-one
Align the print cartridges
The HP all-in-one prompts you to align cartridges every time you install or replace a
print cartridge. You can also align the print cartridges at any time from the control panel
or by using the HP Image Zone software on your computer. Aligning the print cartridges
ensures high-quality output.
Note If you remove and reinstall the same print cartridge, the HP all-in-one will not
prompt you to align the print cartridges. The HP all-in-one remembers the
alignment values for that print cartridge, so you do not need to realign the print
cartridges.
To align the print cartridges from the control panel when prompted
➔
Make sure you have letter or A4 unused plain white paper loaded in the paper tray,
and then press OK.
The HP all-in-one prints a print cartridge alignment sheet and aligns the print
cartridges. Recycle or discard the page.
Note If you have colored paper loaded in the paper tray when you align the print
cartridges, the alignment will fail. Load unused plain white paper into the
paper tray, and then try the alignment again.
If the alignment fails again, you might have a defective sensor or print
cartridge. Contact HP Support. Go to: www.hp.com/support. If prompted,
choose your country/region, and then click Contact HP for information on
calling for technical support.
To align the cartridges from the control panel at any other time
1
2
3
Load letter or A4 unused plain white paper into the paper tray.
Press Setup.
Press 3, then press 2.
This displays the Tools menu and then selects Align Print Cartridge.
The HP all-in-one prints a print cartridge alignment sheet and aligns the print
cartridges. Recycle or discard the page.
For information on aligning the print cartridges by using the HP Image Zone software
that came with your HP all-in-one, see the onscreen HP Image Zone Help that came
with your software.
Clean the print cartridges
To clean the print cartridges from the control panel
1
2
3
Load letter or A4 unused plain white paper into the paper tray.
Press Setup.
Press 3, then press 1.
This displays the Tools menu and then selects Clean Print Cartridge.
The HP all-in-one prints a page that you can recycle or discard.
User Guide
87
Maintain your HP all-in-one
Use this feature when the self-test report shows streaking or white lines through any of
the lines of color. Do not clean print cartridges unnecessarily, as this wastes ink and
shortens the life of the print cartridges.
Chapter 12
If copy or print quality still seem poor after you clean the print cartridges, try
cleaning the print cartridge contacts before replacing the affected print cartridge.
For information on cleaning the print cartridge contacts, see Clean the print
cartridge contacts. For information on replacing the print cartridges, see Replace
the print cartridges.
For information on cleaning the print cartridges by using the HP Image Zone software
that came with your HP all-in-one, see the onscreen HP Image Zone Help that came
with your software.
Clean the print cartridge contacts
Clean the print cartridge contacts only if you get repeated messages on the color
graphics display prompting you to check a print cartridge after you already have cleaned
or aligned the print cartridges.
Before cleaning the print cartridge contacts, remove the print cartridge and verify that
nothing is covering the print cartridge contacts, then reinstall the print cartridge. If you
continue to get messages to check the print cartridges, clean the print cartridge
contacts.
Make sure you have the following materials available:
●
●
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers.
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
Warning Do not use platen cleaners or alcohol to clean the print cartridge
contacts. These can damage the print cartridge or the HP all-in-one.
To clean the print cartridge contacts
1
2
3
Turn on the HP all-in-one and open the print-carriage access door.
The print carriage moves to the far right side of the HP all-in-one.
Wait until the print carriage is idle and silent, and then unplug the power cord from
the back of the HP all-in-one.
Lightly press down on the print cartridge to release it, and then pull it toward you
out of the slot.
Maintain your HP all-in-one
Note Do not remove both print cartridges at the same time. Remove and clean
each print cartridge one at a time. Do not leave a print cartridge outside the
HP all-in-one for more than 30 minutes.
4
5
6
7
88
Inspect the print cartridge contacts for ink and debris buildup.
Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any
excess water from it.
Hold the print cartridge by its sides.
Clean only the copper-colored contacts. For information on cleaning the ink nozzle
area, see Clean the area around the ink nozzles.
HP PSC 2350 series all-in-one
1
Copper-colored contacts
2
Ink nozzles (do not clean)
8
Slide the print cartridge back into the slot. Push the print cartridge forward until it
clicks into place.
9 Repeat if necessary for the other print cartridge.
10 Gently close the print-carriage access door and plug the power cord into the back
of the HP all-in-one.
Clean the area around the ink nozzles
If the HP all-in-one is used in a dusty environment, a small amount of debris might
accumulate inside the device. This debris can include dust, hair, carpet, or clothing
fibers. When debris gets on the print cartridges, it can cause ink streaks and smudges
on printed pages. Ink streaking can be corrected by cleaning around the ink nozzles as
described here.
Note Clean the area around the ink nozzles only if you continue to see streaks and
smudges on your printed pages after you have already cleaned the print
cartridges by using the control panel or the HP Image Zone. For more
information, see Clean the print cartridges.
Make sure you have the following materials available:
●
●
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers.
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
To clean the area around the ink nozzles
1
2
3
User Guide
Turn on the HP all-in-one and open the print-carriage access door.
The print carriage moves to the far right side of the HP all-in-one.
Wait until the print carriage is idle and silent, and then unplug the power cord from
the back of the HP all-in-one.
Lightly press down on the print cartridge to release it, and then pull it toward you
out of the slot.
89
Maintain your HP all-in-one
Warning Do not touch the copper-colored contacts or ink nozzles. Touching
these parts can result in clogs, ink failure, and bad electrical connections.
Chapter 12
Note Do not remove both print cartridges at the same time. Remove and clean
each print cartridge one at a time. Do not leave a print cartridge outside the
HP all-in-one for more than 30 minutes.
4
5
6
Place the print cartridge on a piece of paper with the ink nozzles facing up.
Lightly moisten a clean foam rubber swab with distilled water.
Clean the face and edges around the ink nozzle area with the swab, as shown
below.
1
Nozzle plate (do not clean)
2
Face and edges around the ink nozzle area
Warning Do not clean the nozzle plate.
7
8
9
Slide the print cartridge back into the slot. Push the print cartridge forward until it
clicks into place.
Repeat if necessary for the other print cartridge.
Gently close the print-carriage access door and plug the power cord into the back
of the HP all-in-one.
Change the device settings
You can change the power save time and prompt delay time settings on your HP all-inone so that it behaves according to your preference. You can also restore the device
settings to what they were when you purchased your device. This will erase any new
defaults you have set.
Set the power save time
Maintain your HP all-in-one
The light bulb in the scanner of your HP all-in-one remains on for a specified period so
that the HP all-in-one is immediately ready to respond to your request. When the
HP all-in-one has not been used within that specified period, it turns the light bulb off to
preserve power. You can exit this mode by pressing any button on the control panel.
Your HP all-in-one is automatically set to enter power save mode after 12 hours. Follow
these steps if you want the HP all-in-one to enter this mode earlier.
1
2
3
90
Press Setup.
Press 4, then press 2.
This displays the Preferences menu and then selects Set Power Save Mode
Time.
Press
to select the appropriate time, then press OK.
HP PSC 2350 series all-in-one
You can choose 1, 4, 8, or 12 hours for the power save time.
Set the prompt delay time
The Prompt Delay Time option allows you to control the amount of time that passes
before a message prompts you to take further action. For example, if you press Copy
Menu and the prompt delay time passes without you pressing another button, the
message "Press START COPY to copy. Press Number or OK to select." appears in
the color graphics display. You can choose Fast, Normal, Slow, or Off. If you select
Off, hints will not appear on the color graphics display but other messages, such as low
ink warnings and error messages, will still appear.
1
2
3
Press Setup.
Press 4, then press 3.
This displays the Preferences menu and then selects Set Prompt Delay Time.
to select a delay time, then press OK.
Press
Restore the factory defaults
You can restore the original factory settings to what they were when you purchased
your HP all-in-one.
Note Restoring the factory defaults will not affect any changes you made to scan
settings and the language and country/region settings.
You can perform this process from the control panel only.
1
2
Press Setup.
Press 3, then press 3 again.
This displays the Tools menu and then selects Restore Factory Defaults.
The factory default settings are restored.
Maintain your HP all-in-one
User Guide
91
Maintain your HP all-in-one
Chapter 12
92
HP PSC 2350 series all-in-one
Troubleshooting information
This chapter contains troubleshooting information for the HP all-in-one. Specific
information is provided for installation and configuration issues, and some operational
topics. For more troubleshooting information, see the onscreen HP Image Zone Help
file that came with your software.
Many issues are caused when the HP all-in-one is connected to the computer using a
USB cable before the HP all-in-one software is installed on the computer. If you
connected the HP all-in-one to your computer before the software installation screen
prompts you to do so, you must follow these steps:
1
2
3
4
5
Disconnect the USB cable from the computer.
Uninstall the software (if you have already installed it).
Restart your computer.
Turn off the HP all-in-one, wait one minute, then restart it.
Reinstall the HP all-in-one software. Do not connect the USB cable to the
computer until prompted by the software installation screen.
For information about uninstalling and reinstalling the software, see Uninstall and
reinstall the software.
This section contains the following topics:
●
●
●
Setup troubleshooting: Contains information on hardware setup, software
installation, and HP Instant Share setup troubleshooting information.
Operational troubleshooting: Contains information on issues that may occur
during normal tasks when using the HP all-in-one features.
Device update: Based on advice from HP customer support or a message on the
color graphics display, you might access the HP support website to retrieve an
upgrade for your device. This section contains information about updating your
device.
Before you call HP Support
If you have a problem, follow these steps:
1
Check the documentation that came with the HP all-in-one.
–
–
User Guide
Setup Guide: The Setup Guide explains how to set up the HP all-in-one.
User Guide: The User Guide is the book you are reading. This book describes
the basic features of the HP all-in-one, explains how to use the HP all-in-one
without connecting it to a computer, and contains setup and operational
troubleshooting information.
93
Troubleshooting information
13
Troubleshooting information
Chapter 13
–
–
2
If you are unable to solve the problem using the information in the documentation,
visit www.hp.com/support to do the following:
–
–
–
–
3
4
HP Image Zone Help: The onscreen HP Image Zone Help describes how to
use the HP all-in-one with a computer and contains additional troubleshooting
information not covered in the User Guide.
Readme file: The Readme file contains information on possible installation
problems. For more information, see View the Readme file.
Access online support pages
Send HP an e-mail message for answers to your questions
Connect with an HP technician by using online chat
Check for software updates
Support options and availability vary by product, country/region, and language.
Contact your local point of purchase. If the HP all-in-one has a hardware failure,
you will be asked to bring the HP all-in-one to where you purchased it. Service is
free during the HP all-in-one limited warranty period. After the warranty period, you
will be quoted a service charge.
If you are unable to solve the problem using the onscreen Help or HP websites,
call HP Support using the number for your country/region. For more information,
see Get HP support.
View the Readme file
You might want to refer to the Readme file for more information on possible installation
problems.
●
●
In Windows, you can access the Readme file from Windows taskbar by clicking
Start, pointing to Programs or All Programs, pointing to Hewlett-Packard,
pointing to HP PSC 2350 series all-in-one, and then clicking View the Readme
File.
In Macintosh OS 9 or OS X, you can access the Readme file by double-clicking the
icon located in the top-level folder of the HP all-in-one software CD-ROM.
The Readme file provides more information, including:
●
●
●
Using the reinstall utility after a failed installation to return your computer to a state
that will allow the HP all-in-one to be reinstalled.
Using the reinstall utility in Windows 98 to recover a missing Composite USB
System Driver.
System requirements.
Setup troubleshooting
This section includes installation and configuration troubleshooting tips for some of the
most common issues associated with software installation and hardware setup.
Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the
HP all-in-one hardware.
My HP all-in-one does not turn on
94
HP PSC 2350 series all-in-one
Make sure each of the power cords is firmly connected, and wait a few seconds for
the HP all-in-one to turn on. Also, if the HP all-in-one is plugged in to a power strip,
make sure the power strip is turned on.
My USB cable is not connected
Solution
You must first install the software that came with your HP all-in-one before
connecting the USB cable. During installation, do not plug in the USB cable until
prompted by the onscreen instructions. Connecting the USB cable before prompted
can cause errors.
Connecting your computer to your HP all-in-one with a USB cable is
straightforward. Simply plug one end of the USB cable into the back of your
computer and the other into the back of the HP all-in-one. You can connect to any
USB port on the back of your computer.
Note AppleTalk is not supported.
User Guide
95
Troubleshooting information
Solution
Troubleshooting information
Chapter 13
I received a message on the color graphics display to attach the control panel
overlay
Solution
This might mean the control panel overlay is not attached, or it is attached
incorrectly. Make sure to align the overlay over the buttons on the top of the
HP all-in-one and snap it firmly into place.
The color graphics display shows the wrong language
Solution
Usually, you set the language and country/region when you first set up the HP allin-one. However, you can change these settings at any time by using the following
procedure:
1
2
3
4
5
6
96
Press Setup.
Press 7, and then press 1.
This displays the Preferences menu, and then selects Set Language &
Country/Region.
You are prompted with a list of languages. You can scroll through the list of
languages by pressing the up and down arrows.
Press OK on the appropriate language.
When prompted, press 1 for Yes or 2 for No.
You are prompted with all the countries/regions for the selected language. Use
the arrow buttons on the control panel to scroll through the list.
Using the keypad, enter the two-digit number for the appropriate country/
region.
When prompted, press 1 for Yes or 2 for No.
HP PSC 2350 series all-in-one
1
2
Press Setup.
Press 1, and then press 4.
This selects Print Report, and then selects Self-Test Report.
The wrong measurements are showing in menus on the color graphics display
Solution
You may have selected the incorrect country/region when setting up your HP allin-one. The country/region you select determines the paper sizes shown on the
color graphics display.
To change the country/region, you must first set the default language again.
Usually, you set the language and country/region when you first set up the HP allin-one. However, you can change these settings at any time by using the following
procedure:
1
2
3
4
5
6
Press Setup.
Press 7, and then press 1.
This selects Preferences, and then selects Set Language & Country/Region.
A list of languages appears. You can scroll through the list of languages by
arrows.
pressing the
and
When your language is highlighted, press OK.
When prompted, press 1 for Yes or 2 for No.
to
or
The countries/regions for the selected language appear. Press
scroll through the list.
Use the keypad to enter the two-digit number for the appropriate country/
region.
When prompted, press 1 for Yes or 2 for No.
Print a Self-Test Report to confirm the language and country/region:
1
2
Press Setup.
Press 1, and then press 4.
This selects Print Report, and then selects Self-Test Report.
I received a message on the color graphics display to align the print cartridges
Cause
The HP all-in-one prompts you to align cartridges every time you install a new print
cartridge.
Note If you remove and reinstall the same print cartridge, the HP all-in-one will
not prompt you to align the print cartridges. The HP all-in-one remembers
the alignment values for that print cartridge, so you do not need to realign
the print cartridges.
Solution
Make sure you have letter or A4 unused plain white paper loaded in the paper tray,
and then press OK. For more information, see Align the print cartridges.
User Guide
97
Troubleshooting information
You can confirm the language and country/region by printing a Self-Test Report,
as follows:
Troubleshooting information
Chapter 13
I received a message on the color graphics display that the print cartridge
alignment failed
Cause
The incorrect type of paper is loaded in the paper tray.
Solution
If you have colored paper loaded in the paper tray when you align the print
cartridges, the alignment fails. Load unused plain white letter or A4 paper into the
paper tray, and then try the alignment again.
If the alignment fails again, you might have a defective sensor or print cartridge.
Contact HP Support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
Cause
Protective tape is covering the print cartridges.
Solution
Check each print cartridge. If the plastic tape is still covering the ink nozzles, gently
remove the plastic tape by using the pink pull tab. Do not touch the ink nozzles or
the copper-colored contacts.
98
1
Copper-colored contacts
2
Plastic tape with pink pull tab (must be removed before installing)
3
Ink nozzles under tape
HP PSC 2350 series all-in-one
Troubleshooting information
Reinsert the print cartridges and verify that they are fully inserted and locked in
place.
Cause
The contacts on the print cartridge are not touching the contacts in the print
carriage.
Solution
Remove and then reinsert the print cartridges. Verify that they are fully inserted and
locked in place.
Cause
The print cartridge or sensor is defective.
Solution
Contact HP Support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
The HP all-in-one does not print
Solution
If your HP all-in-one and computer are not communicating with each other, try the
following:
●
●
●
User Guide
Check the USB cable. If you are using an older cable, it might not be working
properly. Try connecting it to another product to see if the USB cable works. If
you experience problems, the USB cable might need to be replaced. Also
verify that the cable does not exceed 3 meters (9.8 feet) in length.
Make sure your computer is USB ready. Some operating systems, such as
Windows 95 and Windows NT, do not support USB connections. Check the
documentation that came with your operating system for more information.
Check the connection from your HP all-in-one to your computer. Verify that the
USB cable is securely plugged into the USB port on the back of your HP allin-one. Make sure the other end of the USB cable is plugged into a USB port
on your computer. After the cable is connected properly, turn your HP all-inone off and then on again.
99
Troubleshooting information
Chapter 13
●
●
●
Check other printers or scanners. You might need to disconnect older products
from your computer.
If your HP all-in-one is networked, see the Network Guide that came with your
HP all-in-one.
After you check the connections, try restarting your computer. Turn your
HP all-in-one off and then on again.
For more information on setting up your HP all-in-one and connecting it to your
computer, see the Setup Guide that came with your HP all-in-one.
I received a message on the color graphics display about a paper jam or a
blocked carriage
Cause
If either a paper jam or blocked carriage error message appears on the color
graphics display, there might be some packing material inside the HP all-in-one.
Solution
Lift open the print-carriage access door to expose the print cartridges and remove
any packing material, tape, or other foreign objects. Turn off the HP all-in-one, wait
one minute, and then press the On button to turn the HP all-in-one back on.
100
HP PSC 2350 series all-in-one
If you encounter a software problem during installation, see the topics below for a
possible solution. If you encounter a hardware problem during installation, see
Hardware setup troubleshooting.
During a normal installation of the HP all-in-one software, the following things occur:
●
●
●
●
●
●
●
The HP all-in-one CD-ROM runs automatically
The software installs
Files are copied to your hard drive
You are requested to plug in the HP all-in-one
A green OK and check mark appear on an installation wizard screen
You are requested to restart your computer
The registration process runs
If any of these things did not occur, there might be a problem with the installation. To
check the installation on a PC, verify the following:
●
●
●
Start the HP Director and check to make sure the following icons appear: Scan
Picture, Scan Document, and HP Gallery. For information on starting
HP Director, see the onscreen HP Image Zone Help that came with your
software. If the icons do not appear immediately, you might need to wait a few
minutes for the HP all-in-one to connect to your computer. Otherwise, see Some of
the icons are missing in the HP Director.
Open the Printers dialog box and check to see that the HP all-in-one is listed.
Look in the system tray at the far right of the Windows taskbar for an HP all-in-one
icon. This indicates that the HP all-in-one is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution
Do the following:
1
2
From the Windows Start menu, click Run.
In the Run dialog box, enter d:\setup.exe (if your CD-ROM drive is not
assigned to drive letter D, enter the appropriate drive letter), and then click OK.
The minimum system checks screen appears
Solution
Your system does not meet the minimum requirements to install the software. Click
Details to see what the specific problem is, and then correct the problem before
attempting to install the software.
A red X appears on the USB connect prompt
Solution
Normally, a green check appears indicating that the plug and play is successful. A
red X indicates that the plug and play failed.
Do the following:
1
User Guide
Verify that the control panel overlay is firmly attached, and then unplug the
HP all-in-one and then plug it in again.
101
Troubleshooting information
Software installation troubleshooting
Troubleshooting information
Chapter 13
2
Verify that the USB and power cables are plugged in.
3
Verify that the USB cable is set up properly as follows:
–
–
–
–
4
5
Unplug the USB cable and plug it in again.
Do not attach the USB cable to a keyboard or non-powered hub.
Verify that the USB cable is 3 meters or less in length.
If you have several USB devices attached to your computer, you might
want to unplug the other devices during the installation.
Continue with the installation and restart the computer when prompted. Then
open HP Director and check for the essential icons (Scan Picture,Scan
Document, and HP Gallery).
If the essential icons do not appear, remove the software and then reinstall it.
For more information, see Uninstall and reinstall the software.
I received a message that an unknown error has occurred
Solution
Try to continue with the installation. If that doesn’t work, stop and then restart the
installation, and follow the directions on the screen. If an error occurs, you might
need to uninstall and then reinstall the software. For information , see Uninstall and
reinstall the software.
Some of the icons are missing in the HP Director
If the essential icons (Scan Picture, Scan Document, and HP Gallery) do not
appear, your installation might not be complete.
Solution
If your installation is incomplete, you might need to uninstall and then reinstall the
software. Do not simply delete the HP all-in-one program files from your hard drive.
Make sure to remove them properly using the uninstall utility provided in the
HP all-in-one program group. For more information, see Uninstall and reinstall the
software.
The registration screen does not appear
102
HP PSC 2350 series all-in-one
➔
In Windows, you can access the registration screen from the Windows taskbar
by clicking Start, pointing to Programs or All Programs (XP), HewlettPackard, HP PSC 2350 series all-in-one, and then clicking Sign up now.
The Digital Imaging Monitor does not appear in the system tray
Solution
If the Digital Imaging Monitor does not appear in the system tray, start the
HP Director to check whether or not essential icons are there. For more
information, see the Use the HP Director section of the HP Image Zone Help that
came with your software.
The system tray normally appears at the bottom of the desktop.
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer
before prompted by the software installation screen, you might need to uninstall and
then reinstall the software. Do not simply delete the HP all-in-one program files from
your hard drive. Make sure to remove them properly using the uninstall utility provided
in the HP all-in-one program group.
A reinstall can take from 20 to 40 minutes for both Windows and Macintosh computers.
There are three methods to uninstall the software on a Windows computer.
To uninstall from a Windows computer, method 1
1
2
3
4
5
Disconnect your HP all-in-one from your computer. Do not connect the HP all-inone to your computer until after you have reinstalled the software.
On the Windows taskbar, click Start, Start Programs or All Programs (XP),
Hewlett-Packard, HP PSC 2350 series all-in-one, uninstall software.
Follow the onscreen instructions.
If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work properly if the files are deleted.
Restart your computer.
Note It is important that you disconnect your HP all-in-one before restarting your
computer. Do not connect the HP all-in-one to your computer until after you
have reinstalled the software.
6
7
8
User Guide
To reinstall the software, insert the HP all-in-one CD-ROM into your computer’s
CD-ROM drive, and follow the onscreen instructions and the instructions provided
in the Setup Guide that came with your HP all-in-one.
After the software is installed, connect the HP all-in-one to your computer.
Press the On button to turn the HP all-in-one on.
103
Troubleshooting information
Solution
Troubleshooting information
Chapter 13
9
After connecting and turning on your HP all-in-one, you might have to wait several
minutes for all of the Plug and Play events to complete.
Follow the onscreen instructions.
When the software installation is complete, the Status Monitor icon appears in the
Windows system tray.
To verify that the software is properly installed, double-click the HP Director icon on the
desktop. If the HP Director shows the key icons (Scan Picture, Scan Document, and
HP Gallery), the software has been properly installed.
To uninstall from a Windows computer, method 2
Note Use this method if Uninstall Software is not available in the Windows Start
menu.
1
2
3
4
5
On the Windows taskbar, click Start, Settings, Control Panel.
Double-click Add/Remove Programs.
Select HP all-in-one & Officejet & OfficeJet 4.0, and then click Change/Remove.
Follow the onscreen instructions.
Disconnect your HP all-in-one from your computer.
Restart your computer.
Note It is important that you disconnect your HP all-in-one before restarting your
computer. Do not connect the HP all-in-one to your computer until after you
have reinstalled the software.
6
7
Launch setup.
Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with your HP all-in-one.
To uninstall from a Windows computer, method 3
Note This is an alternate method if Uninstall Software is not available in the Windows
Start menu.
1
2
3
4
Run the HP PSC 2350 series all-in-one software Setup program.
Select Uninstall and follow the onscreen directions.
Disconnect your HP all-in-one from your computer.
Restart your computer.
Note It is important that you disconnect your HP all-in-one before restarting your
computer. Do not connect the HP all-in-one to your computer until after you
have reinstalled the software.
5
6
7
Run the HP PSC 2350 series all-in-one software Setup program again.
Launch Reinstall.
Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with your HP all-in-one.
To uninstall from a Macintosh computer
1
104
Disconnect the HP all-in-one from your Macintosh.
HP PSC 2350 series all-in-one
4
Double-click the Applications: HP All-in-One Software folder.
Double-click HP Uninstaller.
Follow the onscreen instructions.
After the software is uninstalled, disconnect your HP all-in-one, and then restart
your computer.
Note It is important that you disconnect your HP all-in-one before restarting your
computer. Do not connect the HP all-in-one to your computer until after you
have reinstalled the software.
5
6
7
To reinstall the software, insert the HP all-in-one CD-ROM into your computer’s
CD-ROM drive.
On the desktop, open the CD-ROM and then double-click HP all-in-one installer.
Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with your HP all-in-one.
Operational troubleshooting
The HP PSC 2350 series all-in-one troubleshooting section in the HP Image Zone
contains troubleshooting tips for some of the most common issues associated with your
HP all-in-one.
To access the troubleshooting information from a Windows computer, go to the
HP Director, click Help, and then choose Troubleshooting and Support.
Troubleshooting is also available through the Help button that appears on some error
messages.
To access troubleshooting information from Macintosh OS X v10.1.5 and later, click the
HP Image Zone icon in the Dock, select Help from the menu bar, choose HP Image
Zone Help from the Help menu, and then choose HP PSC 2350 series all-in-one
Troubleshooting in the Help Viewer.
If you have Internet access, you can get help from the HP website at www.hp.com/
support.
The website also provides answers to frequently asked questions.
Paper troubleshooting
To help avoid paper jams, only use paper types that are recommended for your HP allin-one. For a list of recommended papers, see the onscreen HP Image Zone Help, or
go to www.hp.com/support.
Do not load curled or wrinkled paper, or paper with bent or torn edges, into the paper
tray. For more information, see Avoid paper jams.
If paper does become jammed in your device, follow these instructions to clear the
paper jam.
Paper has jammed the HP all-in-one
Solution
1
User Guide
Press in the tab on the left side of the rear clean-out door to release the door.
Remove the door by pulling it away from the HP all-in-one.
105
Troubleshooting information
2
3
Troubleshooting information
Chapter 13
Caution Trying to clear a paper jam from the front of the HP all-in-one
can damage the print mechanism. Always access and clear paper jams
through the rear clean-out door.
2
Gently pull the paper out of the rollers.
Warning If the paper tears when you are removing it from the rollers,
check the rollers and wheels for torn pieces of paper that might be
remaining inside the device. If you do not remove all the pieces of
paper from the HP all-in-one, more paper jams are likely to occur.
3
4
Replace the rear clean-out door. Gently push the door forward until it snaps
into place.
Press OK to continue the current job.
Print cartridge troubleshooting
If you are experiencing problems with printing, you might have a problem with one of the
print cartridges. Try the following:
1
2
3
4
5
Remove and reinsert the print cartridges and verify that they are fully inserted and
locked in place.
If the problem persists, print a self-test report to determine if there is a problem with
the print cartridges.
This report provides useful information about your print cartridges, including status
information.
If the self-test report shows a problem, clean the print cartridges.
If the problem persists, clean the copper-colored contacts of the print cartridges.
If you are still experiencing problems with printing, determine which print cartridge
is experiencing the problem and replace it.
For more information on these topics, see Maintain your HP all-in-one.
Photo memory card troubleshooting
The following troubleshooting tip relate only to Macintosh users of iPhoto.
You have video clips on a memory card, but they do not appear in iPhoto after
you import the memory card’s contents
106
HP PSC 2350 series all-in-one
iPhoto handles still photos only. To manage both video clips and still images, use
Unload Images from the HP Director instead.
Device update
Several means are provided to update your HP all-in-one. Each involves downloading a
file to your computer to start the Device Update Wizard. For example, based on advice
from HP customer support you might access the HP support website to retrieve an
update for your device.
Note If you are a Windows user, you can set the Software Update utility (part of the
HP Image Zone software installed on your computer) to automatically search the
HP support website for device updates at predetermined intervals. For more
information on the Software Update utility, see the onscreen HP Image Zone
Help.
Device update (Windows)
Use one of the following to retrieve an update for your device:
●
●
Use your Web browser to download an update for your HP all-in-one from
www.hp.com/support. The file will be a self-extracting executable with the
extension .exe. When you double-click the .exe file, the Device Update Wizard
opens on your computer.
Use the Software Update utility to automatically search the HP support website for
device updates at predetermined intervals.
Note After the Software Update utility is installed on your computer, it searches
for device updates. If you do not have the latest version of the Software
Update utility at the time of install, a dialog appears on your computer
prompting you to upgrade. Accept the upgrade.
To use device update
1
Do one of the following:
–
–
2
3
4
5
6
User Guide
Double-click the update .exe file you downloaded from www.hp.com/support.
When prompted, accept the device update found by the Software Update
utility.
The Device Update Wizard opens on your computer.
At the Welcome screen, click Next.
The Select a Device screen appears.
Select your HP all-in-one from the list, and then click Next.
The Important Information screen appears.
Make sure your computer and device meet the requirements listed.
If you meet the requirements, click Update.
A light begins to flash on the control panel of your HP all-in-one.
The screen on your color graphics display turns green as the update is loaded and
extracted to your device.
Do not disconnect, shut down, or otherwise disturb your device while the update is
occurring.
107
Troubleshooting information
Solution
Troubleshooting information
Chapter 13
Note If you disrupt the update, or an error message indicates the update failed,
call HP support for assistance.
7
After your HP all-in-one restarts, an update complete screen appears on your
computer
Your device is updated. It is now safe to use your HP all-in-one.
Device update (Macintosh)
The device update installer provides a means to apply updates to your HP all-in-one as
follows:
1
2
3
4
108
Use your Web browser to download an update for your HP all-in-one from
www.hp.com/support.
Double-click the downloaded file.
The installer opens on your computer.
Follow the onscreen prompts to install the update to your HP all-in-one.
Restart the HP all-in-one to complete the process.
HP PSC 2350 series all-in-one
14
Get HP support
Hewlett-Packard provides Internet and phone support for your HP all-in-one.
This chapter provides information on how to get support from the Internet, contact HP customer
support, access your serial number and service ID, call in North America during warranty, call HP
Japan customer support, call HP Korea customer support, call elsewhere in the world, call
Australia post-warranty, and prepare your HP all-in-one for shipment.
If you are unable to find the answer you need in the printed or onscreen documentation supplied
with your product, you can contact one of the HP support services listed in the following pages.
Some support services are available only in the U.S. and Canada, while others are available in
many countries/regions worldwide. If a support service number is not listed for your country/
region, contact your nearest authorized HP dealer for help.
Get HP support
Get support and other information from the Internet
If you have Internet access, you can get help from the following HP website:
www.hp.com/support
This website offers technical support, drivers, supplies, and ordering information.
HP customer support
Software programs from other companies might be included with your HP all-in-one. If you
experience problems with any of those programs, you will receive the best technical assistance by
calling the experts at that company.
If you need to contact HP Customer Support, do the following before you call.
1
Make sure that:
a
Your HP all-in-one is plugged in and turned on.
b
The specified print cartridges are installed correctly.
c
The recommended paper is properly loaded in the input tray.
2
Reset your HP all-in-one:
a
Turn off the HP all-in-one by pressing the On button.
b
Unplug the power cord from the back of the HP all-in-one.
c
Plug the power cord back into the HP all-in-one.
d
Turn on the HP all-in-one by pressing the On button.
3
4
5
For more information, go to www.hp.com/support.
This website offers technical support, drivers, supplies, and ordering information.
If you are still experiencing problems and need to speak with an HP Customer Support
Representative, do the following:
a
Have the specific name of your HP all-in-one, as it appears on the control panel,
available.
b
Print a self-test report. For information on printing a self-test report, see Print a self-test
report.
c
Make a color copy to have available as a sample printout.
d
Be prepared to describe your problem in detail.
e
Have your serial number and service ID ready. For information on how to access your
serial number and service ID, see Access your serial number and service ID.
Call HP Customer Support. Be near your HP all-in-one when you call.
Access your serial number and service ID
You can access important information by using the Information Menu of your HP all-in-one.
User Guide
109
Chapter 14
Note If your HP all-in-one is not turning on, you can view the serial number by looking at the
sticker above the rear cleanout door. The serial number is the 10-character code in the
upper left corner of the sticker.
To access your serial number and service ID
1
2
Press and hold OK. While holding OK, press 4. This displays the Information Menu.
3
Press Cancel and then
until Serial Number appears.
Press OK. This displays the serial number.
Write down the complete serial number.
Press Cancel to exit the Information Menu.
4
5
Press
until Model Number appears and then press OK. This displays the service ID.
Write down the complete service ID.
Get HP support
Call in North America during warranty
Call 1-800-474-6836 (1-800-HP invent). US phone support is available in both English and
Spanish languages 24 hours a day, 7 days a week (days and hours of support may change
without notice). This service is free during the warranty period. A fee may apply outside the
warranty period.
Call elsewhere in the world
The numbers listed below are current as of the publication date of this guide. For a list of current
international HP Support Service numbers, go to www.hp.com/support and choose your own
country/region or language.
You can call the HP support center in the following countries/regions. If your country/region is not
listed, contact your local dealer or nearest HP Sales and Support Office to find out how to obtain
services.
Support service is free during the warranty period; however, your standard long-distance phone
charges will apply. In some cases, a flat fee per single incident will also apply.
For phone support in Europe, please check for the details and conditions of phone support in your
country/region by going to www.hp.com/support.
Alternatively, you can ask your dealer or call HP at the phone number provided in this guide.
As part of our constant efforts to improve our phone support service, we advise you to check our
website on a regular basis for new information regarding service features and delivery.
Country/Region
HP technical support
Country/Region
HP technical support
Algeria1
+213 61 56 45 43
Lebanon
+971 4 883 8454
Argentina
(54)11-4778-8380, 0810-555-5520
Luxembourg (French)
900 40 006
Australia during warranty
131047
Luxembourg (German)
900 40 007
Australia post-warranty
(per-call charge)
1902 910 910
Malaysia
1-800-805405
Austria
+43 1 86332 1000
Mexico
01-800-472-6684
Bahrain
800 171
Mexico (Mexico City)
(55) 5258-9922
Bangladesh
fax to: +65-6275-6707
Middle East
(international)
+971 4 366 2020
110
HP PSC 2350 series all-in-one
(continued)
HP technical support
Country/Region
HP technical support
Belgium (Dutch)
+32 070 300 005
Morocco1
+212 22 404747
Belgium (French)
+32 070 300 004
Netherlands (0.10 Euro/
min.)
0900 2020 165
Bolivia
800-100247
New Zealand
0800 441 147
Brazil (Demais
Localidades)
0800 157751
Nigeria
+234 1 3204 999
Brazil (Grande São
Paulo)
(11) 3747 7799
Norway2
+47 815 62 070
Brunei
fax to: +65-6275-6707
Oman
+971 4 883 8454
Cambodia
fax to: +65-6275-6707
Pakistan
fax to: +65-6275-6707
Canada during warranty
(905) 206 4663
Palestine
+971 4 883 8454
Canada post-warranty
(per-call charge)
1-877-621-4722
Panama
001-800-711-2884
Caribbean & Central
America
1-800-711-2884
Peru
0-800-10111
Chile
800-360-999
Philippines
632-867-3551
China
86-21-38814518,
8008206616
Poland
+48 22 5666 000
Colombia
01-800-51-474-6836
(01-800-51-HP invent)
Portugal
+351 808 201 492
Costa Rica
0-800-011-4114, 1-800711-2884
Puerto Rico
1-877-232-0589
Czech Republic
+420 261307310
Qatar
+971 4 883 8454
Denmark
+45 70 202 845
Romania
+40 (21) 315 4442
Dominican Republic
1-800-711-2884
Russian Federation,
Moscow
+7 095 7973520
Ecuador (Andinatel)
999119+1-800-7112884
Russian Federation, St.
Petersburg
+7 812 3467997
Ecuador (Pacifitel)
1-800-225528+1-8007112884
Saudi Arabia
800 897 1444
Egypt
+20 2 532 5222
Singapore
65 - 62725300
English International
+44 (0) 207 512 5202
Slovakia
+421 2 50222444
Finland
+358 (0) 203 66 767
South Africa (RSA)
086 0001030
France (0.34 Euro/min.)
+33 (0)892 69 60 22
South Africa, Outside
Republic
+27 11 2589301
User Guide
Get HP support
Country/Region
111
Chapter 14
Get HP support
(continued)
Country/Region
HP technical support
Country/Region
HP technical support
Germany (0.12 Euro/
min.)
+49 (0) 180 5652 180
Spain
+34 902 010 059
Greece (Cyprus to
Athens toll free)
800 9 2649
Sri Lanka
fax to: +65-6275-6707
Greece, inside country/
region
801 11 22 55 47
Sweden
+46 (0)77 120 4765
Greece, international
+30 210 6073603
Switzerland 3
+41 0848 672 672
Guatemala
1800-999-5105
Taiwan
+886 (2) 8722-8000,
0800 010 055
Hong Kong SAR
+(852) 2802 4098
Thailand
0-2353-9000
Hungary
+36 1 382 1111
Trinidad & Tobago
1-800-711-2884
India
91-80-8526900
Tunisia
+216 71 89 12 22
India (toll free)
1600-4477 37
Turkey
+90 216 579 71 71
Indonesia
62-21-350-3408
Ukraine, Kiev
+7 (380 44) 4903520
Ireland
+353 1890 923 902
United Arab Emirates
800 4520
Israel
+972 (0) 9 830 4848
United Kingdom
+44 (0) 870 010 4320
Italy
+39 848 800 871
United States
1-800-474-6836 (1-800HP invent)
Jamaica
1-800-711-2884
Venezuela
0-800-474-6836 (0-800HP invent)
Japan
+81-3-3335-9800
Venezuela (Caracas)
(502) 207-8488
Jordan
+971 4 883 8454
Vietnam
84-8-823-4530
Korea
+82 1588 3003
W. Africa
+351 213 17 63 80
Kuwait
+971 4 883 8454
Yemen
+971 4 883 8454
1
2
3
1
This Call Center supports French-speaking customers from the following countries: Morocco, Tunisia, and
Algeria.
Setup price per call: 0.55 Norway kroner (0.08 Euro), customer price per minute: 0.39 Norway kroner
(0.05 Euro).
This Call Center supports German-, French-, and Italian-speaking customers in Switzerland (0.08 CHF/
min. during peak hours, 0.04 CHF/min. during off-peak hours).
Call in Australia post-warranty
If your product is not under warranty, call 131047. A per-incident, out-of-warranty support fee will
be charged to your credit card.
You can also call 1902 910 910. A per-incident, out-of-warranty support fee will be charged to your
phone bill.
112
HP PSC 2350 series all-in-one
Call HP Korea customer support
Call HP Japan support
Get HP support
TEL : 0570-000-511
03-3335-9800
FAX : 03-3335-8338
9:00
17:00
10:00
17:00
1/1
3
FAX
User Guide
113
Chapter 14
HP Quick Exchange Service (Japan)
HP Quick Exchange Service
Get HP support
0570-000511
:03-3335-9800
:
9:00
10:00
5:00
1 1
3
5:00
:
Prepare your HP all-in-one for shipment
If after contacting HP Customer Support or returning to the point of purchase, you are requested to
send your HP all-in-one in for service, please follow the steps below to avoid further damage to the
HP product.
Note This information does not apply to customers in Japan. For information on service options in
Japan, see HP Quick Exchange Service (Japan).
1
2
3
Turn on the HP all-in-one. If your HP all-in-one will not turn on, skip this step and go to step
2.
Open the print-carriage access door.
Wait until the print carriage is idle and silent, and then remove the print cartridges from their
slots. For information on removing the print cartridges, see Replace the print cartridges.
Note If your HP all-in-one does not turn on, you can unplug the power cord and then
manually slide the print carriage to the far right to remove the print cartridges. When
finished, manually move the print carriage to the home position (on the left side).
4
5
Place the print cartridges in print cartridge protectors or an airtight plastic container so they
will not dry out, and put them aside. Do not send them with the HP all-in-one unless the
HP customer support call agent instructs you to.
Close the print-carriage access door and wait a few minutes for the print carriage to move
back to its home position (on the left side).
Note Make sure the scanner has returned to its parked position before turning off the
HP all-in-one.
114
HP PSC 2350 series all-in-one
6
7
Press the On button to turn off the HP all-in-one.
Unplug the power cord, and then disconnect it from the HP all-in-one. Do not return the
power cord with the HP all-in-one.
Warning The replacement HP all-in-one will not be shipped with a power cord.
Store the power cord in a safe place until the replacement HP all-in-one arrives.
Remove the control panel overlay as follows:
a
Make sure the color graphics display is lying flat against the HP all-in-one.
b
Raise the lid.
c
Place your thumb along the groove on the left side of the control panel overlay. Gently
remove the control panel overlay from the device as shown below.
9
Retain the control panel overlay. Do not return the control panel overlay with the HP all-inone.
Get HP support
8
Tip See the Setup Guide that came with your HP all-in-one for instructions on how to attach
your control panel overlay.
Warning The replacement HP all-in-one might not come with a control panel
overlay. Store your control panel overlay in a safe place, and when the replacement
HP all-in-one arrives, reattach your control panel overlay. You must attach your
control panel overlay to use the control panel functions on the replacement HP allin-one.
10
User Guide
If available, pack the HP all-in-one for shipment by using the original packing materials or the
packaging materials that came with your exchange device.
115
Chapter 14
Get HP support
11
12
If you do not have the original packaging materials, please use other adequate packaging
materials. Shipping damage caused by improper packaging and/or improper transportation is
not covered under the warranty.
Place the return shipping label on the outside of the box.
Include the following items in the box:
–
–
–
116
A complete description of symptoms for service personnel (samples of print quality
problems are helpful).
A copy of the sales slip or other proof of purchase to establish the warranty coverage
period.
Your name, address, and a phone number where you can be reached during the day.
HP PSC 2350 series all-in-one
15
Warranty information
Your HP all-in-one comes with a limited warranty that is described in this section. Information
about how to obtain warranty service and how you can upgrade your standard factory warranty is
also provided.
This chapter provides information on duration of limited warranty, warranty service, warranty
upgrades, returning you HP all-in-one for service, and contains the Hewlett-Packard limited global
warranty statement.
Duration of limited warranty
Duration of Limited Warranty (hardware and labor): 1 Year
Duration of Limited Warranty (CD media): 90 Days
Duration of Limited Warranty (print cartridges): Until the HP ink is depleted or the "end of warranty"
date printed on the cartridge has been reached, whichever occurs first. This warranty does not
cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered
with.
Warranty service
To obtain HP repair service, you must first contact an HP service office or an HP Customer
Support Center for basic troubleshooting. See HP customer support for steps to take before calling
Customer Support.
Note This information does not apply to customers in Japan. For information on service options in
Japan, see HP Quick Exchange Service (Japan).
Warranty upgrades
Depending on your country/region, HP might offer a warranty upgrade option that extends or
enhances your standard product warranty. Available options might include priority phone support,
return service, or next business day exchange. Typically, service coverage begins on product
purchase date and must be purchased within a limited time of product purchase.
For more information:
●
In the U.S., dial 1-866-234-1377 to speak to an HP advisor.
●
Outside the U.S., please call your local HP Customer Support office. See Call elsewhere in
the world for a list of international Customer Support numbers.
●
Go to www.hp.com/support.
If prompted, choose your country/region, and then find warranty information.
Returning your HP all-in-one for service
Before returning your HP all-in-one for service, you must call HP Customer Support. See
HP customer support for steps to take before calling Customer Support.
Note This information does not apply to customers in Japan. For information on service options in
Japan, see HP Quick Exchange Service (Japan).
User Guide
117
Warranty information
If your HP all-in-one needs a minor part replacement that you can replace, HP might prepay
shipping charges, duty and taxes; provide telephone assistance for replacing the part; and pay
shipping charges, duty, and taxes for any part that HP asks you to return. Otherwise, the
HP Customer Support Center will direct you to an authorized service provider who is certified by
HP to service the product.
Chapter 15
Hewlett-Packard limited global warranty statement
Extent of limited warranty
Hewlett-Packard ("HP") warrants to the end-user customer ("Customer") that each HP PSC
2350 series all-in-one product ("Product"), including related software, accessories, media, and
supplies, shall be free from defects in material and workmanship for the duration, which begins on
the date of purchase by the Customer.
For each hardware Product, the duration of HP's limited warranty is one year for parts and one
year for labor. For all other Products, the duration of HP's limited warranty for both parts and labor
is ninety days.
For each software Product, HP's limited warranty applies only to a failure to execute programming
instructions. HP does not warrant that the operation of any Product shall be uninterrupted or error
free.
HP's limited warranty covers only those defects which arise as a result of normal use of a Product,
and does not cover any other problems, including those which arise as a result of (a) improper
maintenance or modification, (b) software, accessories, media, or supplies not provided or
supported by HP, or (c) operation outside the Product's specifications.
For any hardware Product, the use of a non-HP ink cartridge or a refilled ink cartridge does not
affect either the warranty to the Customer or any HP support contract with the Customer.
However, if Product failure or damage is attributable to the use of a non-HP or refilled ink
cartridge, HP shall charge its standard labor and materials charges to service the Product for the
failure or damage.
If HP receives, during the applicable warranty period, notice of a defect in any Product, HP shall
either repair or replace the defective Product, at HP's option. Where labor charges are not covered
by HP's limited warranty, repairs shall be at HP's standard charges for labor.
Warranty information
If HP is unable to repair or replace, as applicable, a defective Product which is covered by HP's
warranty, HP shall, within a reasonable time after being notified of the defect, refund the purchase
price for the Product.
HP shall have no obligation to repair, replace, or refund until the Customer returns the defective
Product to HP.
Any replacement product may be either new or like-new, provided that it has functionality at least
equal to that of the Product being replaced.
HP products, including each Product, may contain remanufactured parts, components, or materials
equivalent to new in performance.
HP's limited warranty for each Product is valid in any country/region or locality where the covered
HP product is distributed by HP. Contracts for additional warranty service, such as on-site service,
are available from any authorized HP service facility in countries/regions where the product is
distributed by HP or by an authorized representative.
Limitations of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY
SUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER
EXPRESS OR IMPLIED, WARRANTIES OR CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
Limitations of liability
To the extent allowed by local law, the remedies provided in this Limited Warranty Statement are
the Customer's sole and exclusive remedies.
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS
SPECIFICALLY SET FORTH IN THIS LIMITED WARRANTY STATEMENT, IN NO EVENT SHALL
HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT,
118
HP PSC 2350 series all-in-one
OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Local law
This Limited Warranty Statement gives the Customer specific legal rights. The Customer may also
have other rights which vary from state to state in the United States, from province to province in
Canada, and from country/region to country/region elsewhere in the world.
To the extent this Limited Warranty Statement is inconsistent with local law, this Statement shall be
deemed modified to be consistent with such local law. Under such local law, certain disclaimers
and limitations of this Statement may not apply to the Customer. For example, some states in the
United States, as well as some governments outside the United States (including provinces in
Canada), may:
Preclude the disclaimers and limitations in this Statement from limiting the statutory rights of a
consumer (for example, the United Kingdom);
Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or
Grant the Customer additional warranty rights, specify the duration of implied warranties which the
manufacturer cannot disclaim, or not allow limitations on the duration of implied warranties.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE TERMS IN THIS
LIMITED WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO
NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY
STATUTORY RIGHTS APPLICABLE TO THE SALE OF THE COVERED HP PRODUCTS TO
SUCH CUSTOMERS.
Limited warranty information for EU countries/regions
Listed below are the names and addresses of the HP entities which grant HP's Limited Warranty
(manufacturer's warranty) in EU countries/regions.
Belgique/Luxembourg
Ireland
Hewlett-Packard Belgium SA/NV
Hewlett-Packard Ireland Ltd.
Woluwedal 100
30 Herbert Street
Boulevard de la Woluwe
IRL-Dublin 2
Warranty information
You may also have statutory legal rights against the seller on the basis of the purchase
agreement in addition to the manufacturer's warranty, which are not restricted by this
manufacturer's warranty.
B-1200 Brussels
Danmark
Nederland
Hewlett-Packard A/S
Hewlett-Packard Nederland BV
Kongevejen 25
Startbaan 16
DK-3460 Birkeroed
1187 XR Amstelveen NL
France
Portugal
Hewlett-Packard France
Hewlett-Packard Portugal - Sistemas de
1 Avenue du Canada
Informática e de Medida S.A.
Zone d'Activite de Courtaboeuf
Edificio D. Sancho I
F-91947 Les Ulis Cedex
Quinta da Fonte
Porto Salvo
2780-730 Paco de Arcos
User Guide
119
Chapter 15
(continued)
P-Oeiras
Deutschland
Österreich
Hewlett-Packard GmbH
Hewlett-Packard Ges.m.b.H.
Herrenberger Straße 110-140
Lieblgasse 1
D-71034 Böblingen
A-1222 Wien
España
Suomi
Hewlett-Packard Española S.A.
Hewlett-Packard Oy
Carretera Nacional VI
Piispankalliontie 17
km 16.500
FIN-02200 Espoo
28230 Las Rozas
E-Madrid
Sverige
Hewlett-Packard Hellas
Hewlett-Packard Sverige AB
265, Mesogion Avenue
Skalholtsgatan
15451 N. Psychiko Athens
9S-164 97 Kista
Italia
United Kingdom
Hewlett-Packard Italiana S.p.A
Hewlett-Packard Ltd
Via G. Di Vittorio 9
Cain Road
20063 Cernusco sul Naviglio
Bracknell
I-Milano
GB-Berks RG12 1HN
Warranty information
Greece
120
HP PSC 2350 series all-in-one
16
Technical information
The technical specifications and international regulatory information for your HP all-in-one are
provided in this section.
This chapter provides information on system requirements for Windows and Macintosh; paper,
print, copy, memory card, specifications for scan, physical, power, and environmental concerns;
regulatory notices; and the declaration of conformity.
System requirements
Software system requirements are located in the Readme file. You can access the Readme file by
double-clicking the icon located in the top-level folder of the HP all-in-one software CD-ROM. If
Windows software is already installed, you can access the Readme file from the Start button on
the taskbar; select Programs, Hewlett-Packard, HP PSC 2400 Series, View the Readme File.
Paper specifications
This section provides information on paper-tray capacities, paper sizes, and print margin
specifications.
Paper-tray capacities
Type
Paper weight
Input tray1
Output tray2
Plain paper
16 to 24 lb.(60 to 90
gsm)
100 (20 lb. paper)
50 (20 lb. paper)
Legal paper
20 to 24 lb.(75 to 90
gsm)
100 (20 lb. paper)
50 (20 lb. paper)
Cards
110 lb. index max(200
gsm)
20
10
Envelopes
20 to 24 lb. (75 to 90
gsm)
10
10
Transparency film
N/A
30
15 or fewer
Labels
N/A
20
10
4 by 6 inch (10 by 15 cm)
Photo Paper
145 lb.
30
15
8.5 by 11 inch (216 by 279
mm) Photo Paper
N/A
20
10
User Guide
Technical information
1
2
(236 gsm)
Maximum capacity.
Output tray capacity is affected by the type of paper and the amount of ink you are using.
HP recommends emptying the output tray frequently.
121
Chapter 16
Paper sizes
Type
Size
Paper
Letter: 216 by 280 mm (8.5 by 11 inches)
A4: 210 by 297 mm
A5: 148 by 210 mm
Executive: 184.2 by 266.7 mm (7.25 by 10.5 inches)
Legal: (216 by 356 mm) (8.5 by 14 inches)
Envelopes
U.S. #10: 105 by 241 mm (4.125 by 9.5 inches)
U.S. #9: 98 by 225 mm (3.9 by 8.9 inches)
A2: 111 by 146 mm (4.4 by 5.8 inches)
DL: 110 by 220 mm (4.3 by 8.7 inches)
C6: 114 by 162 mm (4.5 by 6.4 inches)
Transparency film
Letter: 216 by 279 mm (8.5 by 11 inches)
A4: 210 by 297 mm
Photo paper
102 by 152 mm (4 by 6 inches)
Cards
76 by 127 mm (3 by 5 inches)
Index card: 101 by 152 mm (4 by 6 inches)
127 by 178 mm (5 by 7 inches)
A6: 105 by 148.5 mm
Hagaki postcard: 100 by 148 mm (3.94 by 5.83 inches)
Labels
Letter: 216 by 279 mm (8.5 by 11 inches)
A4: 210 by 297 mm
76 by 127 mm up to 216 by 356 mm (3 by 5 inches up to 8.5 by 14
inches)
Technical information
Custom
122
HP PSC 2350 series all-in-one
Print margin specifications
Top (leading edge)
Bottom (trailing edge)1
U.S. (Letter, Legal, Executive)
1.8 mm (0.07 inches)
6.7 mm (0.3 inches)
ISO (A4, A5) and JIS (B5)
1.8 mm (0.07 inches)
6.7 mm (0.3 inches)
3.2 mm (0.13 inches) ()
6.7 mm (0.3 inches)
1.8 mm (0.07 inches)
6.7 mm (0.3 inches)
Paper or transparency film
Envelopes
Cards
1
This margin is not compatible; however, the total writing area is compatible. The writing area
is offset from center by 5.4 mm (0.21 inches), which causes asymmetric top and bottom
margins.
Print specifications
●
●
●
●
●
●
●
600 by 600 dpi black
1200 by 1200 dpi color with HP PhotoREt III
Method: drop-on-demand thermal inkjet
Language: HP PCL Level 3, PCL3 GUI or PCL 10
Print speeds vary according to the complexity of the document
Duty cycle: 500 printed pages per month (average)
Duty cycle: 5000 printed pages per month (maximum)
Mode
Resolution (dpi)
Best
Normal
Fast
1
Speed (ppm)
Black
1200 by 1200
2
Color
1200 by 1200 up to 4800 dpi optimized
Black
600 by 600
7
Color
600 by 600
4
Black
300 by 300
23
Color
300 by 300
18
1
0.5
Technical information
Up to 4800 by 1200 optimized dpi color printing on premium photo papers, 1200 by 1200
input dpi.
Copy specifications
●
●
●
●
●
●
User Guide
Digital image processing
Up to 99 copies from original (varies by model)
Digital zoom from 25 to 400% (varies by model)
Fit to page, Poster, Many on page
Up to 23 copies per minute black; 18 copies per minute color (varies by model)
Copy speeds vary according to the complexity of the document
123
Chapter 16
Mode
Best
Normal
Fast
1
2
Speed (ppm)
Print resolution (dpi)
Scan resolution (dpi)1
Black
up to 0.8
1200 by 1200
1200 by 2400
Color
up to 0.8
1200 by 1200
Black
up to 7
600 by 1200
600 by 1200
Color
up to 4
600 by 600
600 by 1200
Black
up to 23
300 by 1200
600 by 1200
Color
up to 18
600 by 300
600 by 1200
2
1200 by 2400
Maximum at 400% scaling.
On photo paper or premium paper.
Memory card specifications
●
●
●
Maximum recommended number of files on a memory card: 1,000
Maximum recommended individual file size: 12 megapixel maximum, 8 MB maximum
Maximum recommended memory card size: 1 GB (solid state only)
Note Approaching any of the recommended maximums on a memory card might cause the
performance of the HP all-in-one to be slower than expected.
●
●
●
●
●
●
●
●
CompactFlash
SmartMedia
Memory Stick
Memory Stick Duo
Memory Stick Pro
Secure Digital
MultiMediaCard (MMC)
xD-Picture Card
Scan specifications
Technical information
●
●
●
●
●
●
●
Image editor included
Integrated OCR software automatically converts scanned text to editable text
Scan speeds vary according to the complexity of the document
Twain-compliant interface
Resolution: up to 1200 x 4800 dpi optical; 19200 dpi enhanced (software)
Color: 48-bit color, 8-bit grayscale (256 levels of gray)
Maximum scan size from glass: 21.6 by 29.7 cm (8.5 by 11.7 inches)
Physical specifications
●
●
●
●
Height: 17.2 cm (6.7 inches) (color graphics display in the down position)
Width: 44 cm (17.2 inches)
Depth: 28.4 cm (11.1 inches)
Weight: 5.5 kg (12.2 pounds)
Power specifications
●
●
●
124
Power consumption: 80 W maximum
Input voltage: AC 90 to 240 V ~ 1 A 47–63 Hz, grounded
Output voltage: DC 32 Vdc===1630 mA
HP PSC 2350 series all-in-one
Environmental specifications
●
●
●
●
●
●
Recommended operating temperature range: 15º to 32º C (59º to 90º F)
Allowable operating temperature range: 5º to 40º C (41º to 104º F)
Humidity: 15% to 85% RH non-condensing
Non-operating (Storage) temperature range: –4º to 60º C (–40º to 140º F)
In the presence of high electromagnetic fields it is possible the output from the HP all-in-one
may be slightly distorted
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields
Additional specifications
Memory: 8 MB ROM, 32 MB DRAM
If you have Internet access, you can get acoustic information from the HP website. Go to:
www.hp.com/support.
Environmental product stewardship program
This section provides information on protecting the environment; ozone production; energy
consumption; paper use; plastics; material safety data sheets; and recycling programs.
Protecting the environment
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
This product has been designed with several attributes to minimize impacts on our environment.
For more information, visit HP’s Commitment to the Environment website at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html
Ozone production
This product generates no appreciable ozone gas (O3).
Energy consumption
Energy usage drops significantly while in ENERGY STAR® mode, which saves natural resources,
and saves money without affecting the high performance of this product. This product qualifies for
ENERGY STAR, which is a voluntary program established to encourage the development of
energy-efficient office products.
For more information on ENERGY STAR guidelines, go to the following website:
www.energystar.gov
Paper use
This product is suited for the use of recycled paper according to DIN 19309.
User Guide
125
Technical information
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner,
HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.
Chapter 16
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of the product’s life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP website at:
www.hp.com/go/msds
Customers without Internet access should contact their local HP Customer Care Center.
Recycling program
HP offers an increasing number of product return and recycling programs in many countries, as
well as partnering with some of the largest electronic recycling centers throughout the world. HP
also conserves resources by refurbishing and reselling some of its most popular products.
This HP product contains the following materials that may require special handling at end-of-life:
●
●
Mercury in the fluorescent lamp in the scanner (< 2 mg)
Lead in the solder
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges free of charge. For
more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html
Regulatory notices
The HP all-in-one meets product requirements from regulatory agencies in your country/region.
This section provides information on the regulatory model identification number for your HP all-inone; an FCC statement; and separate notices to users in Australia, Japan, and Korea.
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-0401-02. This regulatory number should
not be confused with the marketing name (HP PSC 2350 series all-in-one) or product number
(Q5786A).
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the
following notice be brought to the attention of users of this product.
Technical information
Declaration of Conformity: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Class B
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
●
●
126
Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
HP PSC 2350 series all-in-one
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San
Diego, (858) 655-4100.
The user may find the following booklet prepared by the Federal Communications Commission
helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from
the U.S. Government Printing Office, Washington DC, 20402. Stock No. 004-000-00345-4.
Caution Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
equipment not expressly approved by the Hewlett-Packard Company may cause harmful
interference and void the FCC authorization to operate this equipment.
Notice to users in Australia
This equipment complies with Australian EMC requirements.
Notice to users in Japan (VCCI-2)
Notice to users in Korea
Declaration of conformity (European Economic Area)
The Declaration of Conformity in this document complies with ISO/IEC Guide 22 and EN 45014. It
identifies the product, manufacturer’s name and address, and applicable specifications recognized
in the European community.
Technical information
User Guide
127
Chapter 16
Declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
__________________________________________________________________________
Manufacturer’s Name:
Hewlett-Packard Company
Manufacturer’s Address:
16399 West Bernardo Drive
San Diego CA 92127, USA
SDGOB-0401-02
Regulatory Model Number:
declares, that the product:
Product Name:
HP PSC 2350 Series (Q5786A)
Model Number(s): PSC 2350 (Q5792A, Q5792B), PSC 2352 (Q5797C), PSC 2353 (Q5796C), PSC 2355
(Q5789A, Q5789B, Q5795C), PSC 2355xi (Q5790A), PSC 2355v (Q5791A), PSC 2357
(Q5794B), PSC 2358 (Q5788D)
Power Adapter(s) HP part#:
0950-4491
conforms to the following Product Specifications:
Safety:
IEC 60950-1: 2001
EN 60950-1: 2002
IEC 60825-1 Edition 1.2: 2001 / EN 60825-1+A11+A2+A1: 2002 Class 1(Laser/Led)
UL 60950-1: 2003
CAN/CSA-22.2 No. 60950-1-03
NOM 019-SFCI-1993, AS/NZS 60950: 2000, GB4943: 2001
EMC:
CISPR 22:1997 / EN 55022:1998 Class B
CISPR 24:1997 / EN 55024:1998
IEC 61000-3-2: 2000 / EN 61000-3-2: 2000
IEC 61000-3-3/A1: 2001 / EN 61000-3-3/ A1: 2001
AS/NZS CISPR 22: 2002
CNS13438:1998, VCCI-2
FCC Part 15-Class B/ICES-003, Issue 2
GB9254: 1998
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EC, the EMC
Directive 89/336/EC and carries the CE-marking accordingly.
1) The product was tested in a typical configuration.
18 March 2004
Date
Steve Smith, Hardware Test & Regs MGR.
Technical information
European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Strasse 140,
(FAX +49-7031-14-3143)
128
HP PSC 2350 series all-in-one
Index
Symbols/Numerics
10 by 15 cm photo paper,
load 33
4 by 6 inch photo paper,
load 33
A
A4 paper, load 31
align print cartridges 87
B
best copy quality 51
borderless copies
10 by 15 cm (4 by 6 inch)
photo 53
fill entire page 54
borderless photos
print from memory card 45
C
cancel
copy 59
print job 67
scan 63
cancel button 8
cartridges. see print cartridges
clean
exterior 80
glass 79
lid backing 79
print cartridge contacts 88
print cartridge ink nozzle
area 89
print cartridges 87
color
copies 57
intensity 56
color graphics display
change language 96
change measurements 97
icons 9
screen saver 9
CompactFlash memory
card 37
connection types supported
networked 20
User Guide
printer sharing 20
USB 19
control panel
overview 6
copy
black-and-white
documents 52
cancel 59
color intensity 56
copy specifications 123
default settings 52
enhance light areas 57
enlarge into poster 58
iron-on transfer 58
menu 9
number of copies 52
paper size 49
paper types,
recommended 50
photos onto letter or A4
paper 54
photos, enhance 57
quality 51
several on one page 55
speed 51
text, enhance 57
customer support
Australia 112
contact 109
HP Quick Exchange Service
(Japan) 114
Japan 113
Korea 113
North America 110
outside U.S. 110
serial number 109
service ID 109
warranty 117
website 109
D
darken
copies 56
declaration of conformity
European Economic
Area 127
United States 128
default settings
restore 91
device update
Macintosh 108
overview 107
Windows 107
digital camera
PictBridge 46
down arrow 8
DPOF file 46
E
envelopes, load 34
Environmental product
stewardship program 125
environmental
specifications 125
F
factory defaults, restore 91
fast copy quality 51
FCC statement 126
fill entire page 54
fit to page 55
G
glass
clean 79
load original 29
greeting cards, load 34
H
Hagaki cards, load 33
HP all-in-one
overview 5
prepare to ship 114
HP Director
HP Instant Share 75
missing icons 102
start 11
HP Gallery
OS 9 HP Image Zone 16
OS X HP Image Zone 14
HP help (OS 9 HP Image
Zone) 16
129
HP Image Print (OS X HP Image
Zone) 14
HP Image Zone
HP Instant Share 73, 74
Macintosh 12, 15, 74
overview 11
Windows 11, 12, 73
HP Instant Share
about 69
e-mail 48
e-mail photos from a
memory card (USB) 70
e-mail photos from the
HP Image Zone (USB) 73
HP Image Zone 73
online albums 48
quality prints 48
send images 70
send images from HP image
Zone (USB) 73
send photos from a memory
card (USB) 70
send scanned images 71
send to a device 70, 73
setup (USB) 69
HP JetDirect
set up 20
HP on the Web (OS 9 HP Image
Zone) 16
HP Support
before you call 93
I
ink cartridges. see print
cartridges
ink levels, check 80
inkjet supplies recycling 126
Instant Share. see HP Instant
Share
iron-on transfers
copy 58
iron-on transfers, load 34
J
jams, paper 35, 105
K
keypad
8
L
labels, load 34
left arrow 8
130
legal paper, load 31
letter paper, load 31
lid backing, clean 79
lighten
copies 56
load
10 by 15 cm photo
paper 33
4 by 6 inch photo paper 33
A4 paper 31
envelopes 34
full-size paper 31
greeting cards 34
Hagaki cards 33
iron-on transfers 34
labels 34
legal paper 31
letter paper 31
original 29
postcards 33
transparencies 34
M
maintenance
align print cartridges 87
check ink levels 80
clean exterior 80
clean glass 79
clean lid backing 79
clean print cartridges 87
power save mode 90
prompt delay time 91
replace print cartridges 82
restore factory defaults 91
self-test report 80
make copies
button (HP Director) 12
OS 9 HP Image Zone 16
OS X HP Image Zone 14
media. see paper
memory card
specifications 124
memory cards
insert a card 38
overview 37
print DPOF file 46
print photos 44
proof sheet 39
save files to computer 38
send photos 70
Memory Stick memory card 37
MicroDrive memory card 37
more applications (OS 9 HP
Image Zone) 16
MultiMediaCard (MMC) memory
card 37
N
normal copy quality 51
number of copies
copy 52
O
OK button 8
on button 7
order
paper 77
print cartridges 77
Setup Guide 78
software 78
User Guide 78
P
paper
incompatible types 30
jams 35, 105
load 31
order 77
paper sizes 122
recommended copy
types 50
recommended types 30
paper specifications 121
paper-tray capacities 121
phone numbers, customer
support 109
photo
menu 10
menu button 8
photo paper, load 33
photos
borderless 45
deselect 45
enhance copies 57
HP Image Zone 73
photo print cartridge 85
print from DPOF file 46
Quick Print 46
send from a memory
card 70
send scanned images 71
slide show 47
physical specifications 124
PictBridge 46
HP PSC 2350 series all-in-one
Index
postcards, load 33
posters
copy 58
power save mode 90
power specifications 124
print
cancel job 67
from computer 65
from software
application 65
photos from DPOF file 46
photos from memory
card 44
print options 66
print specifications 123
proof sheet 39
Quick Print 46
self-test report 80
print cartridge protector 86
print cartridges
align 87
check ink levels 80
clean 87
clean contacts 88
clean ink nozzle area 89
handle 82
order 77
part names 82
photo print cartridge 85
replace 82
store 86
troubleshoot 106
print margin specifications 123
printer sharing
Macintosh 20
Windows 19, 20
prompt delay time 91
proof sheet
fill in 40
menu 10
print 39
scan 41
Q
quality
copy 51
Quick Print 46
R
recycling 126
reduce/enlarge copies
fit several on one page 55
User Guide
poster 58
resize to fit letter or A4 55
regulatory notices
declaration of
conformity 128
declaration of conformity
(European Economic
Area) 127
FCC statement 126
notice to users in
Japan 127
notice to users in
Korea 127
regulatory model
identification number 126
replace print cartridges 82
reports
self-test 80
restore factory settings 91
return your HP all-in-one 114
right arrow 8
rotate button 8
S
save
photos to computer 38
scan
button 8
from front panel 61
HP Instant Share 71
proof sheet 41
scan specifications 124
stop 63
to memory card 62
scan document (OS 9 HP Image
Zone) 16
scan document button (HP
Director) 12
scan glass
clean 79
load original 29
scan picture
OS 9 HP Image Zone 16
OS X HP Image Zone 14
scan picture button (HP
Director) 12
scan to menu
USB - Macintosh 10
USB - Windows 10
scan to OCR (OS X HP Image
Zone) 14
screen saver 9
Secure Digital memory
card 37
self-test report 80
send to a device
from a memory card 70
HP Director
(Macintosh) 75
HP Image Zone
(Macintosh) 74
HP Image Zone
(Windows) 73
scanned images 71
serial number 109
service 109
see also customer support
service ID 109
settings
print options 66
setup
button 8
menu 11
slide show 47
SmartMedia memory card 37
software application, print
from 65
software update.. see device
update
specifications. see technical
information
speed
copy 51
start black 8
start color 8
stop
copy 59
print job 67
scan 63
support
before you call 93
resources 93
system requirements 121
T
technical information
copy specifications 123
environmental
specifications 125
memory card
specifications 124
paper sizes 122
paper specifications 121
paper-tray capacities 121
physical specifications 124
131
power specifications 124
print margin
specifications 123
print specifications 123
scan specifications 124
system requirements 121
weight 124
telephone numbers, customer
support 109
text
enhance on copies 57
transfer images button (HP
Director) 12
transparencies, load 34
troubleshoot
contact HP Support 93
hardware installation 94
incorrect
measurements 97
installation overview 94
operational 105
overview 93
photo memory card 106
software installation 101
support resources 93
U
unload images
OS 9 HP Image Zone 16
OS X HP Image Zone 13
up arrow 8
USB cable installation 95
W
warranty
upgrades 117
Webscan 22
X
xD memory card 37
Z
zoom button 8
132
HP PSC 2350 series all-in-one
Printed on at least 50% total recycled fiber
with at least 10% post-consumer paper
© 2004 Hewlett-Packard Development Company, L.P.
Electronic Edition
www.hp.com
*Q5786-90177*
*Q5786-90177*
Q5786-90177