IMB203 Series Quick Installation Guide IMB203 Series Quick

IMB203 Series Quick Installation Guide
Board Layout
I.
Checklist
9 IMB203 Socket 775 All-In-One
9 SATA Cable x 1
Board x 1
9 Quick Installation Guide x 1
9 Product Information CD x 1
9 2-pin Mini Jumper Caps x 15
9 COM, Printer Extension Cables with
Bracket x 1
9 I/O Bracket x 1
Note: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II.
Jumper Settings
Before applying the power to IMB203 Series, please make sure all
jumper settings are defaulted as the following table:
Description
COM1
Function
RS-232
JP1
Jumper Setting
JP3
JP4
JP1
JP3
JP4
JP1
JP3
JP4
(Default)
RS-422
Description
©Copyright 2009 AXIOMTEK Co., Ltd.
4
Version A1 March 2009
Printed in Taiwan
9418F203010E
(Default)
Audio
Disable
Amplifier
(Default)
CMOS
1
IMB203 Series Quick Installation Guide
IV.
Disable
Clear
(JP7)
Front Panel Connector
Enable
(Default)
(JP2)
„
III.
Connectors
Label
CN1
CN2
CN3
CN4
CN5
CN6, CN7
Label
CN14
CN16
CN19
CN25
CN26
CN27, CN29, CN33, CN45
CN31
CN36, CN37, CN41,
CN50
CN52
Power LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the system power
Connector
VGA
COM 1
Audio out, Mic in
Keyboard Mouse
Print Port
USB Ports
Connector
ATX 2x2
COM 2
COM 3
COM 4
DIO
USB
FAN
SATA
ATX-24Pin
F_PANEL
LED indicator to such a switch on the case. Pin 1 is assigned as +, and Pin 5 as
-. The Power LED lights up when the system is powered ON.
„
External Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted speaker unit or internal
buzzer. While connecting the CPU card to an internal buzzer, please short pins
2-4; while connecting to an external speaker, you need to set pins 2-4 to Open
and connect the speaker cable to pin 8 (+) and pin 2 (-).
„
ATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the front panel’s ATX
power button to the CPU card, which allows users to control ATX power supply
to be power on/off.
„
System Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset switch that reboots
your computer instead of turning OFF the power switch. It is a better way to
„
reboot your system for a longer life of the system’s power supply.
HDD Activity LED
This connection is linked to hard drive activity LED on the control panel. LED
flashes when HDD is being accessed. Pin 13 and 14 connect the hard disk drive
to the front panel HDD LED, Pin 13 assigned as -, and Pin 14 as +.
2
©Copyright 2009 AXIOMTEK Co., Ltd.
Version A1 March 2009
Printed in Taiwan
9418F203010E
©Copyright 2009 AXIOMTEK Co., Ltd.
Version A1 March 2009
Printed in Taiwan
9418F203010E
3
Please refer to the IMB203 Series Product Information CD for the complete User’s Manual, drivers and utilities.
Please refer to the IMB203 Series Product Information CD for the complete User’s Manual, drivers and utilities.
Enable
Enable (JP10)
Jumper Setting
Normal
©Copyright 2009 AXIOMTEK Co., Ltd.
Version A1 March 2009
Printed in Taiwan
9418F203010E
IMB203 Series Quick Installation Guide
ME Disable/
Function
CMOS Clear
Please refer to the IMB203 Series Product Information CD for the complete User’s Manual, drivers and utilities.
Please refer to the IMB203 Series Product Information CD for the complete User’s Manual, drivers and utilities.
V.
IMB203 Series Quick Installation Guide