HT-F9750W
7.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HT-F9750W-XY-0604.indd 1
2013-06-04 오전 10:08:55
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock
or personal injury.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
• This apparatus shall always be connected to an AC
outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore
the mains plug shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates
important instructions
accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
| 2 English
HT-F9750W-XY-0604.indd 2
2013-06-04 오전 10:09:18
Disc Storage & Management
• Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the same wall
socket. Overloading a socket can cause it to overheat,
resulting in a fire.
• Maintenance of the Cabinet
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a cold place
to a warm place, condensation may occur on the
operating parts and lens and cause abnormal disc
playback. If this occurs, unplug the product, wait for
two hours, and then connect the plug to the power
outlet. Then, insert the disc, and try to play back
again.
Manufactured under licence
from Dolby Laboratories.
Dolby, Pro Logic, and
the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a licence from U.S. Patent
No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, DTS-HD, the Symbol, and DTS
or DTS-HD and the Symbol together are registered
trademarks & DTS Neo:Fusion is a trademark of DTS,
Inc. ©2012 DTS, Inc. All Rights Reserved.
ABOUT DIVX VIDEO: DivX®
is a digital video format
created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com
for more information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.
com for more information on how to complete your
registration.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under licence.
Covered by one or more of the following U.S. patents
: 7,295,673; 7,460,668; 7,515,710; 7,519,274
English
HT-F9750W-XY-0604.indd 3
Safety Information
Handling Cautions
Licence
01
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where data has
been recorded.
- Hold the disc by the edges so that fingerprints will
not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted
in water and wipe with a soft cloth.
- When cleaning, wipe gently from the
inside to the outside of the disc.
- Disc Storage
 Do not keep in direct sunlight.
 Keep in a cool ventilated area.
 Keep in a clean protection jacket and store
vertically.
• If the product makes an abnormal noise or produces
a burning smell or smoke, turn off the power switch
immediately and disconnect the power plug from
the wall outlet. Then, contact the nearest customer
service centre for technical assistance. Do not use the
product. Using the product as it is may cause a fire or
an electric shock.
3|
2013-06-04 오전 10:09:19
Safety Information
The terms HDMI and HDMI
High-Definition Multimedia
Interface, and the HDMI
Logo are trademarks or registered trademarks of
HDMI Licencing LLC in the United States and other
countries.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering
and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks
of Blu-ray Disc Association.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When
a prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will
be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Centre
at http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Centre, P.O. Box 86851, San Diego, CA, 92138, USA.”
This product incorporates proprietary technology
under licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
- Open Source Licence Notice
In the case of using open source software, Open
Source Licences are available on the product menu.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
• Some viewers may experience discomfort while viewing
3D TV such as dizziness, nausea, and headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
• Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
• A responsible adult should frequently check on children
who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
• Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
• Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or 3D
Active Glasses while moving around may cause you to
bump into objects, trip, and/or fall, and cause serious
injury.
• If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s HDMI
OUT port using a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
• The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D video, you
can not change the resolution to your preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not operate
properly in 3D play mode.
• You must use a high-speed HDMI cable for proper
output of the 3D signal.
• Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 3.5 meters from the
screen.
• Place the 3D video screen at eye level for the best 3D
picture.
• When the product is connected to some 3D devices,
the 3D effect may not function properly.
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
| 4 English
HT-F9750W-XY-0604.indd 4
2013-06-04 오전 10:09:20
Copyright
MEDIA PLAY
SAFETY INFORMATION
2
3
3
3
4
5
Warning
Disc Storage & Management
Handling Cautions
Licence
Using the 3D Function
Copyright
GETTING STARTED
6
7
10
11
11
12
13
Disk and Format Compatibility
Logos of Discs the Product can Play
Accessories
Front Panel
Rear Panel
Toroidal Ferrite Core
Remote Control
The All Content Screen
Playing Commercial Discs
Playing Files on a USB Device
Playing a Disc with User Recorded Content
Using the AllShare Network Function
Controlling Video Playback
Controlling Music Playback
Playing Photo Contents
Listening to Radio
Using the Special Effects Remote Control Buttons
Safety Information
Contents
31
31
31
32
32
33
36
40
41
42
01
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
NETWORK SERVICES
44
44
45
45
49
49
52
Logging In to Your Samsung Account
Before Using Movies & TV Shows or Apps
Using Movies & TV Shows
Using Apps
Screen Mirroring
Using the Web Browser
Linking your Internet Service Accounts to the
Product
52 BD-LIVE™
APPENDIX
53 Additional Information
57 Troubleshooting
60 Specifications
 Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
CONNECTIONS
15 Connecting the Speakers
18 Connecting to TV/External Devices
19 Connecting to a Network Router
SETTINGS
20
20
20
21
25
26
29
The Initial Settings Procedure
The Home Screen
Accessing the Settings Screen
Settings Menu Functions
Auto Sound Calibration
Networks and the Internet
Upgrading Software
English
HT-F9750W-XY-0604.indd 5
5|
2013-06-04 오전 10:09:21
Getting Started
Disk and Format Compatibility
Disc Types and content your Product can Play
Media
Disc Type
Blu-ray Disc
3D Blu-ray Disc
VIDEO
Details
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have
been recorded and finalised, or a USB storage media containing DivX,
MKV, MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing JPEG contents.
| NOTES |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30
Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc Types your Product cannot Play
• HD DVD
• DVD-ROM/PD/MV-Disc,
etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
• 3.9 GB DVD-R Disc for
Authoring.
| NOTES |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care Centre at, if you have questions or encounter difficulty when playing
Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on
playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
| 6 English
HT-F9750W-XY-0604.indd 6
2013-06-04 오전 10:09:22
Region Code
Logos of Discs the Product can Play
Region
Code
Area
A
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
B
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central
and South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
Blu-ray Disc
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
Getting Started
Disc Type
02
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
DTS
DVD-VIDEO
PAL broadcast system in U.K,
France, Germany, etc.
DivX
Java
| NOTES |
If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of this
product, the product cannot play the disc.
English
HT-F9750W-XY-0604.indd 7
7|
2013-06-04 오전 10:09:23
Getting Started
Supported Formats
Video File Support
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bit Rate
(Mbps)
Audio Codec
Divx 3.11 / 4
/5/6
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
*.webm
WebM
MPEG4 SP/ASP
H.264 BP/
MP/HP
Motion JPEG
Microsoft
MPEG-4 v3
1920x1080
(WMV v7,v8,
MSMPEG4 v3 :
1280x720)
6~30
30
Window Media
Video v7, v8, v9
MPEG2
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital
Plus
MPEG(MP3)
DTS (Core)
MPEG1
VP6
640x480
-
4
MVC
-
24/25/30
60
VP8
1920x1080
6~30
20
 Limitations
- Even when a file is encoded by a supported codec
listed above, the file might not be played if its content
is defective or corrupted.
- Normal playback is not guaranteed if the file's container
information is wrong or the file itself is corrupted.
- Files having higher bit or frame rates than standard
may stutter when played back.
- The seek (skip) function is not available if the file's
index table is damaged.
- When you playback a file remotely through a network
connection, video playback may stutter depending on
the network speed.
- Some USB/Digital camera devices may not be
compatible with the product.
 Video decoder
- Supports up to H.264 Level 4.1 (except for FMO/ASO/
RS)
- Does not support VC1 AP L4
- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6
Below 1280 X 720: 60 frame max
Above 1280 X 720: 30 frame max
Vorbis
- Does not support GMC 2 or higher
- Supports SVAF Top/Bottom, Side by Side Only
- Supports BD MVC Spec Only
 Audio decoder
-
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA lossless audio.
Supported ADPCM IMA, MS.
Does not support ADPCM (A-Law, μ-Low)
Does not support QCELP, AMR NB/WB
Supports vorbis (Up to 2ch),
Supports Dolby Digital Plus (Up to 7.1ch)
 Comments
-
MPEG4 : Supports up to GMC 1-Warping Point.
H.264 : Supports up to BP/MP/HP Level 4.1.
WMV : Supports V9, VC1 SP/MP/AP L3.
MPEG1 : Does not support D-picture.
MPEG2 : Supports up to Hight Profile High Level.
| 8 English
HT-F9750W-XY-0604.indd 8
2013-06-04 오전 10:09:25
Supported DivX subtitle file formats
Picture File Support
*.ttxt, *.smi, *.srt, *.sub, *.txt
depending on their video resolution and frame rate.
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3
MPEG
MPEG1
Audio
Layer 3
-
File Extension
Type
Resolution
*.jpg
*.jpeg
JPEG
15360x8640
*.png
PNG
4096x4096
*.bmp
BMP
4096x4096
*.mpo
MPO
15360x8640
Notes on the USB connection
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
Supports up to
2ch
*.ogg
OGG
Vorbis
Supports up to
2ch
*.wma
WMA
WMA
Supports WMA 10
Pro (Up to 5.1)
Does not support
WMA lossless
audio
Supports up to M2
profile
Does not support
LBR mode
*.wav
wav
wav
-
*.mid
*.midi
midi
midi
type 0 and type 1
*.ape
ape
ape
Does not support
X13, NVT
• Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
• The product does not support folder or file names
longer than 128 characters.
• Some USB/digital camera devices may not be
compatible with the product.
• Your product supports the FAT 16, FAT 32, and NTFS
file systems.
• Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
• Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a “loading”
process.
• The bigger the image resolution, the longer the image
takes to display.
• This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
• Your product only supports video that is under 30fps
(frame rate).
• Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this product.
• If some USB devices require excessive power, they
may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
• SAMSUNG is not responsible for any data file damage
or data loss.
English
HT-F9750W-XY-0604.indd 9
Getting Started
Some MKV and MP4 format discs may not play,
02
| NOTES |
9|
2013-06-04 오전 10:09:26
Getting Started
AVCHD (Advanced Video Codec High Definition)
• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing
format.
• Some AVCHD discs use the “x.v.Colour” format. This product can play back AVCHD discs that use the “x.v.Colour”
format.
• “x.v.Colour” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.
| NOTES |
Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalised.
“x.v.Colour” offers a wider colour range than normal DVD camcorder discs.
Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
(For Power cord)
BD
RECEIVER
TV
FUNCTION
TV/SOURCE
2
5
8
0
1
4
7
DISC
MENU
3
6
9
TITLE MENU
POPUP
MUTE
(For Speaker cable)
VOL
TV
SOUND
HOME
S/W
LEVEL
User Manual
Toroidal Ferrite Core
ASC microphone
TUNING
/ CH
SLEEP
TOOLS
INFO
RETURN
EXIT
TUNERMEMORY MO/ST
A
B
C
D
SMART
SOUND
3D
SEARCH
HUB
EFFECT SOUND
FM Antenna
Power Cable
Soft Cloth
Remote Control/
Batteries (AAA size)
| 10 English
HT-F9750W-XY-0604.indd 10
2013-06-04 오전 10:09:26
Front Panel
02
VACUUM TUBE AMP
PLAY/PAUSE
OPEN/CLOSE
FUNCTION
POWER
Getting Started
D
H-EN
HIG
STOP
VACUUM TUBE SO
UND
DISC TRAY
REMOTE CONTROL SENSOR
DISPLAY
USB
5V
0.5A
VOLUME CONTROL
| NOTES |
Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the
product can cause audio noise or distortion.
When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
E button.
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
Rear Panel
* FM ANTENNA
ASC IN
AUX IN
SPEAKER OUTPUT
CONNECTORS
LAN TERMINAL
COOLING FAN
FM ANT
L
POWER
OPTICAL
ASC IN
HDMI OUT
1
HDMI IN
R
2
HDMI OUT
HDMI IN
SPEAKERS OUT
AUX IN
LAN
CENTER
FRONT
SUBWOOFER
FRONT
DIGITAL
AUDIO IN
L
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3Ÿ
EXTERNAL DIGITAL AUDIO IN (OPTICAL)
POWER CORD
* Connecting the FM Antenna
1.
Connect the FM antenna supplied to the FM ANT Jack.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
English
HT-F9750W-XY-0604.indd 11
11 |
2013-06-04 오전 10:09:28
Getting Started
Toroidal Ferrite Core
For the Power Cord
POWER
<SWA-6000>
<Main Unit>
If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make a loop twice in the power cord.
3.
Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.
For the Speaker Cable
OPTICAL
ASC IN
DIGITAL
AUDIO IN
<SWA-6000>
SPEAKERS OUT
FM ANT
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3Ÿ
<Main Unit>
SWA-6000
Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver
(SWA-6000) and insert the ferrite core in the same way as step 3 above.
Main Unit
1.
Open the ferrite core by pulling up the tab.
2.
Make a loop twice in the Speaker Cables.
3.
Attach the ferrite core to the arranged cables and press to close it until you hear a click.
• Insert the ferrite core as close to the main unit as possible.
| 12 English
HT-F9750W-XY-0604.indd 12
2013-06-04 오전 10:09:30
Remote Control
02
Tour of the Remote Control
BD
RECEIVER
FUNCTION
TV/SOURCE
Press to open and close the disc
tray.
Press numeric buttons to operate
options.
Press to view the disc menu.
TV
2
5
8
0
1
4
7
DISC
MENU
3
6
9
TITLE MENU
POPUP
Press to skip backwards or
forwards.
If you want to change to Home
Cinema mode on the remote control,
check this button's LED colour.
- Home Cinema : Orange
- TV : Green
Getting Started
Turn the product on and off.
Press to select the home cinema's
mode (HDMI1, AUX, BD/DVD,
etc.).
or
Press to select TV's video mode.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when
pressed. (Using the remote control
with this button set to ON will reduce
the battery usage time.)
Use to enter the Popup menu/Title
menu.
Press to search backwards or
forwards.
Press to stop/play a disc.
Press to pause a disc.
Cut off the sound temporarily.
MUTE
Adjust the volume.
VOL
TV
SOUND
Press to output the audio signal
to the home cinema speakers or
the TV Speaker. (See page 43)
Use to adjust the level of the
subwoofer.
Press to use the Tools menu.
TUNING
/ CH
Press to move to the Home screen.
HOME
S/W
LEVEL
TOOLS
SLEEP
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Press to use Smart Hub.
Press to search contents.
Set a Sleep time to shut off the
product.
INFO
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Select on-screen menu items and
change menu value.
Return to the previous menu.
Search for active FM stations and
to change channels.
EXIT
RETURN
TUNERMEMORY MO/ST
A
B
C
D
SMART SEARCH SOUND
3D
HUB
EFFECT SOUND
Press to exit the menu.
Select MONO or STEREO for radio
broadcasts.
Use to set a preset radio frequency.
Press to apply the 3D sound effect.
Press to apply sound effects.
English
HT-F9750W-XY-0604.indd 13
13 |
2013-06-04 오전 10:09:32
Getting Started
Installing batteries in the Remote Control
Brand
Battery size: AAA
1
TV Control Codes
2
Code
Brand
Code
Mitsubishi/MGA
18, 40, 59, 60, 75
Admiral
(M.Wards)
56, 57, 58
MTC
18
A Mark
01, 15
NEC
18, 19, 20, 40, 59, 60
Anam
01, 02, 03, 04, 05, 06, 07,
08, 09, 10, 11, 12, 13, 14
03
03
03
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48, 54,
62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
40
AOC
01, 18, 40, 48
Nikei
Onking
Onwa
Bell & Howell
(M.Wards)
57, 58, 81
Panasonic
Brocsonic
59, 60
Penney
| NOTES |
Candle
18
Make sure to match the “+” and “–” ends of the
Cetronic
03
batteries with the diagram inside the compartment.
Citizen
03, 18, 25
Assuming typical TV usage, the batteries last for about
Cinema
97
one year.
The remote control can be used up to approximately 7
meters from the product in a straight line.
Setting up the Remote Control
You can control certain functions of your TV with this
remote control.
To operate a TV with the Remote Control
1.
Press the TV button to set the remote control to TV
mode.
2.
Turn on your TV.
3.
While holding down the POWER button, enter the
code corresponding to your brand of TV.
• If there is more than one code listed for your TV in
the table, enter one at a time to determine which
code works.
• Example : For a Samsung TV
While holding down the POWER button, use
the number buttons to enter 00. If that does not
work, try 15, then 16, etc.
4.
If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
| NOTES |
Classic
03
Concerto
18
Contec
46
Coronado
15
Craig
03, 05, 61, 82, 83, 84
Croslex
62
Crown
03
Curtis Mates
59, 61, 63
CXC
03
Daewoo
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daytron
40
Dynasty
03
Emerson
03, 15, 40, 46, 59, 61, 64,
82, 83, 84, 85
Fisher
19, 65
Funai
03
Futuretech
03
General Electric 06, 40, 56, 59, 66, 67, 68
(GE)
Hall Mark
40
Hitachi
15, 18, 50, 59, 69
Inkel
45
JC Penny
56, 59, 67, 86
The remote may not be able to control some
JVC
70
functions, depending on your brand of TV. Also, the
remote control may not work on some brands of TVs.
The remote control will work with Samsung TVs by
default.
KTV
59, 61, 87, 88
KEC
03, 15, 40
KMC
15
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39,
40, 41, 42, 43, 44
Philco
Philips
Pioneer
Portland
Proton
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
Samsung
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
Sanyo
Scott
Sears
Sharp
Signature 2000
(M.Wards)
19, 61, 65
03, 40, 60, 61
15, 18, 19
15, 57, 64
Sony
50, 51, 52, 53, 55
Soundesign
03, 40
57, 58
Spectricon
01
SSS
18
Sylvania
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
18, 40, 48, 54, 59, 60,
62
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
Videch
59, 60, 69
Luxman
18
Wards
15, 17, 18, 40, 48, 54,
60, 64
LXI (Sears)
19, 54, 56, 59, 60, 62, 63,
65, 71
Yamaha
18
York
40
Magnavox
15, 17, 18, 48, 54, 59, 60,
62, 72, 89
Yupiteru
03
Marantz
40, 54
Zenith
58, 79
Matsui
54
Zonda
01
MGA
18, 40
Dongyang
03, 54
| 14 English
HT-F9750W-XY-0604.indd 14
2013-06-04 오전 10:09:33
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
03
Connecting the Speakers
Centre
Subwoofer
under the TV stand.
Front/
Front Top (R)
Connections
Position of the product
Place it on a stand or cabinet shelf, or
Selecting the Listening Position
The listening position should be located
about 2.5 to 3 times the distance of the
Surround (R)
Product
TV's screen size away from the TV.
For example, if you have a 46 inch
Front/
Front Top (L)
screen, locate the listening position 2.92
to 3.50 meters from the screen.
Surround (L)
Wireless
Receiver Module
Front/Front Top
Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the front speakers so that their tweeters will be at the same height as your ear. Align
the front face of the front/front top speakers with the front face of the centre speaker or place
them slightly in front of the centre speakers.
Centre Speaker
It is best to install the Centre Speaker at the same height as the front/front top speakers. You
can also install it directly over or under the TV.
Surround
Speakers
Subwoofer
Place these speakers to the side of your listening position. If there isn't enough room, place
these speakers so they face each other. Position them about 60 to 90cm above your ear,
facing slightly downward.
* Unlike the front/front top and centre speakers, the surround speakers are used mainly for
sound effects. Sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
* Surround speakers must be connected to the wireless receiver module.
Speaker Components
SWA-6000
Screw (5x20) x 16
Speaker Cable x 2
Centre
Front/Front Top x 2 Surround x 2
Stand x 4
Stand Base x 4
Subwoofer
Wireless Receiver
Module
English
HT-F9750W-XY-0604.indd 15
15 |
2013-06-04 오전 10:09:34
Connections
Installing the Speakers on the Tallboy Stand
1.
2.
Straighten the speaker cable and put it into the hole on the
Stand Base.
1
Stand Base
2
Turn the Stand Base upside-down and connect it to the
Stand.
Stand
3.
Use the driver to combine the screws on the 3 marked
holes.
4.
Connect the upper Speaker to the assembled Stand.
3
4
Speaker
Stand
5.
Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver.
6.
This is the appearance after the speaker is installed. Follow
these steps to install other speaker.
5
6
or
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the colour coded
plug on each bundle to the coloured sticker on the bottom of each speaker.
2.
To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3.
4.
5.
6.
Black
Red
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
Connect the left and right surround speakers to the wireless receiver module.
Again, match the colour of the plugs to the jacks on the wireless receiver module.
Plug the power cord of the wireless receiver module into a wall outlet.
Turn on the product. The product and wireless receiver module will now communicate with each other and you will
hear sound from the Surround speakers.
| 16 English
HT-F9750W-XY-0604.indd 16
2013-06-04 오전 10:09:38
SPEAKERS OUT
Surround
Speaker (R)
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3Ÿ
Connections
Front/Front Top
Speaker (L)
Subwoofer
Surround
Speaker (L)
03
Centre Speaker
Front/Front Top
Speaker (R)
L
ASC IN
N
SPEAKERS OUT
T
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3Ÿ
Wireless Receiver Module
* This product should be connected with the SWA-6000 only.
| CAUTION |
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the
rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by
the company.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall using the duct (hole).
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
any obstructions.
If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.
In 2-CH mode, you will hear no sound from the wireless surround speakers.
| NOTES |
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to
the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses
the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 10m, but may vary
depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the
wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless
receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless
receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5
seconds, and then turn the product on.
English
HT-F9750W-XY-0604.indd 17
17 |
2013-06-04 오전 10:09:41
Connections
Connecting to TV/External Devices
AUX IN
L
FM ANT
ASC IN
1
HDMI OUT
HDMI IN
2
R
DIGITAL
AUDIO IN
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRONT TOP
L
FRONT TOP
R
LAN
IMPEDANCE : 3Ÿ
L
R
W
FM ANT
POWER
OPTICAL
SPEAKERS OUT
AUX IN
LAN
1
HDMI OUT
Red
HDMI IN
R
2
OPTICAL
DIGITAL
AUDIO IN
White
Method 1
HDMI IN
External
Devices
Method 2
HDMI OUT
Method 3
AUDIO OUT
OPTICAL OUT
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT
Method 1 HDMI IN : Connecting to an External Component with a HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 AUX IN : Connecting an External Analogue Component
Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-TopBoxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital
Optical Out jack of the external digital device.
 Select the D. IN mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
| 18 English
HT-F9750W-XY-0604.indd 18
2013-06-04 오전 10:09:42
Connecting to a Network Router
Wireless Network
03
You can connect your product to your network router
using one of the methods illustrated below.
Connections
Wired Network
L
FM ANT
POWER
OPTICAL
ASC IN
1
HDMI IN
2
R
DIGITAL
AUDIO IN
SPEAKERS OUT
AUX IN
LAN
HDMI OUT
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3Ÿ
Wireless IP sharer
Broadband modem
(with integrated router)
Broadband
service
Broadband
service
Or
Router
| NOTES |
If your wireless IP router supports DHCP, this product
Broadband
service
Broadband
modem
can use a DHCP or static IP address to connect to the
wireless network.
Set your wireless IP router to Infrastructure mode. Adhoc mode is not supported.
The product supports only the following wireless
security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is not
| NOTES |
Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
DSL users, please use a router to make a network
connection.
To use the AllShare function, you must connect your
PC to your network as shown in the illustrations on the
above.
The connection can be wired or wireless.
currently being used. If the channel set for the wireless
IP router is currently being used by another device
nearby, it will result in interference and communication
failure.
In compliance with the newest Wi-Fi certification
specifications, Samsung home cinema do not support
WEP, TKIP, or TKIP-AES (WPS2 Mixed) security
encryption in networks running in the 802.11n mode.
Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP
performance, distance, obstacles, interference by
other radio devices, etc).
English
HT-F9750W-XY-0604.indd 19
19 |
2013-06-04 오전 10:09:44
Settings
The Initial Settings Procedure
• The Home menu will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
The Initial Settings Procedure lets you set the OSD and
menu languages, configure the connection to your home
network, choose the aspect ratio output (screen size and
format) that is correct for your TV, and apply an upgrade
to your product's software, if one is available.
For complete Initial Settings instructions, follow the order
in the screen.
| NOTES |
If you want to display the Initial Settings screen again
and make changes, select Settings > System >
Setup in the Home screen or select the Reset option.
(See page 23)
3
Photos, Videos & Music : Play photos, videos
or music content from Disc, USB, PC or mobile
devices.
4
Settings : Set various functions to suit your
personal preferences.
5
Recommended Apps : A list of useful and
popular apps we recommend you download.
6
Web Browser : You can access the Internet
using the Web Browser application.
7
RED (A) : Press the RED (A) button on your
remote to create and/or log in to your personal
Samsung account.
BLUE (D) : Set up the wireless mirroring
function between the home cinema and a smart
phone or tablet.
 Selecting an Option on the Home Screen
1.
The Home Screen
To select an option on the Home screen, move the
cursor using the ▲▼◄► buttons until it highlights
the option of your choice, and then press the E
button.
| NOTES |
1
Movies & TV
Shows
2
3
Apps
4
If you leave the product in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power will
automatically turn off.
Photos,
Videos &
Music
Accessing the Settings Screen
1.
Select Settings on the Home screen, and then
press E.
E The Settings screen appears.
Settings
Add App
Add App
Add App
Web Browser
Settings
Display
Display
a Samsung Account d Screen Mirroring
UHD Output
Audio
5 6
7
TV Aspect Ratio
Smart Features
BD Wise
System
Support
Movies & TV Shows : Download movies and
TV Shows from the Internet.
1
Auto
3D Settings
Network
16:9 Original
Off
Resolution
Auto
Movie Frame (24Fs)
Auto
DVD 24fps Conversion
Off
| NOTES |
Depending on your country, this menu
function may not be supported.
2
Apps : Access various for pay or free-of-charge
applications.
2.
To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration on the next page.
| 20 English
HT-F9750W-XY-0604.indd 20
2013-06-04 오전 10:09:46
Buttons on the Remote Control Used
for the Settings Menu
TOOLS
3D Settings
TV Aspect
Ratio
Lets you adjust the output of the
product to the screen size of your
TV. See page 53.
SLEEP
INFO
3
2
EXIT
RETURN
4
TUNERMEMORY MO/ST
A
B
C
D
1
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Return to the previous menu.
3
E (Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the E button to activate the currently
selected item or confirm a setting.
4
EXIT Button : Press to exit the current menu.
BD Wise
BD Wise is Samsung’s latest interconnectivity feature.
When you connect a Samsung
product and a Samsung TV with BD
Wise to each other via HDMI, and
BD Wise is on in both the product
and TV, the product outputs video at
the video resolution and frame rate
of the Blu-ray/DVD Disc.
Resolution
Lets you set the output resolution of
the HDMI video signal to
BD Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number
indicates the number of lines of
video per frame. The i and p indicate
interlaced and progressive scan,
respectively. The more lines, the
higher quality.
Movie Frame
(24Fs)
Setting the Movie Frame (24Fs)
feature to Auto lets the product
adjust its HDMI output to 24 frames
per second automatically for
improved picture quality if attached
to a 24Fs compatible TV.
• You can enjoy the Movie Frame
(24Fs) feature only on a TV
supporting this frame rate.
• Movie Frame is only available
when the product is in the HDMI
1080p output resolution modes.
Detailed Function Information
Each Settings function, menu item, and individual option
is explained in detail on-screen. To view an explanation,
use the ▲▼◄► buttons to select the function, menu
item, or option. The explanation will usually appear on the
right of the screen.
A short description of each Settings function starts on
this page. Additional information on some of the functions
is also in the Appendix of this manual.
Settings Menu Functions
Display
This option outputs HDMI video at
UHD resolution. This is only available
when Movie Frame is set to Auto.
| NOTES |
UHD Output
To use this feature, you must
Settings
1
04
HOME
S/W
LEVEL
Set up the 3D related functions.
3D Blu-ray Playback Mode:
Select whether to play a Blu-ray
Disc with 3D contents in 3D Mode.
If you move to the Home or Smart
Hub Home menu while in 3D
mode, the product will switch to 2D
automatically.
Screen Size: Enter the size of the
TV attached to the product. The
product will automatically adjust the
3D output to the screen size of the
TV.
connect the product to a device
that supports UHD resolution and
you must have content that plays
at 24Fs (film speed).
English
HT-F9750W-XY-0604.indd 21
21 |
2013-06-04 오전 10:09:49
Settings
DVD 24fps
Conversion
Converts DVD playback to 24
frames per second and outputs it via
HDMI. This option is only available
when Movie Frame (24Fs) is set to
on.
Smart Hub
Screen Size
Lets you select the optimal size for
the Smart Hub Screen.
HDMI Colour
Format
Lets you set the colour space format
for the HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
HDMI Deep
Colour
Lets you set the product to output
video from the HDMI OUT jack with
Deep Colour. Deep Colour provides
more accurate colour reproduction
with greater colour depth.
Progressive
Mode
Lets you improve picture quality
when viewing DVDs.
Audio
Speaker
Settings
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
Distance: Lets you adjust the
relative distance of each speaker
from the listening position up to 9
meters. The farther the distance,
the louder the speaker will be.
Test Tone: Lets you run the Test
Tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it
to Off turns it off.
Auto Sound
Calibration
The product automatically recognize
the sound field optimized for your
environment.
Equaliser
Smart Volume
Lets you configure the Equaliser
settings manually.
Speaker
Selection
Lets you select which speakers you
want active, either the TV's speakers
or the home cinema's speakers.
Audio Return
Channel
Lets you direct the sound from the
TV to the Home Cinema speakers.
Requires a HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
• If Audio Return Channel is set to
on and you are using an HDMI
cable to connect the product to
the TV, digital optical input will not
work.
• If Audio Return Channel is set to
auto and you are using an HDMI
Cable to connect the product to
the TV, ARC or digital optical input
is selected automatically.
Digital Output
Lets you set the Digital Output to
match the capabilities of the AV
receiver you’ve connected to the
product. For more details, please
refer to the digital output selection
table. (See page 55)
Dynamic
Range
Control
Lets you apply dynamic range
control to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD
audio.
Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
turns dynamic range control off for
Dolby Digital and Dolby Digital Plus.
Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
Downmixing
Mode
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You
can choose to have the product
downmix to normal stereo or in
surround compatible stereo.
Lets you set the product so that
the volume remains stable when a
scene change occurs or when you
change the channel.
| 22 English
HT-F9750W-XY-0604.indd 22
2013-06-04 오전 10:09:51
Smart Features
Network
Status
Lets you check the current network
and Internet status.
Network
Settings
Configure the network connection
so you can enjoy various features
such as Internet services or AllShare
Wi-Fi functionality, and perform
software upgrades.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct
device to the product using a peerto-pear network, without the need
for a wireless router.
Note that if the product is connected
to a wireless network, it may be
disconnected when you use Wi-Fi
Direct.
| NOTES |
Text files, such as files with a .TXT
or .DOC extension, will not display
when you are using the Wi-Fi
Direct function.
AllShare
Settings
Lets you control which devices on
your network, such as smart phones
and tablets, can share content with
your TV.
Device Name
Lets you assign an identifying name
to the product. You use this name
to identify the product when you are
connecting external Wi-Fi devices
(smart phones, tablets, etc.) to it.
BD-Live
Settings
Set various BD-Live functions.
BD-Live allows you to access extra
features available on some Blu-ray
Discs if you are connected to the
Internet.
BD-Live Internet Connection :
Lets you fully allow, partly allow,
or prohibit a BD-Live Internet
connection.
BD Data Management : Manage
BD data downloaded from a BDLive service or Blu-ray Disc.
You can lock access to Video on
Demand (VOD) content based on its
rating.
VOD Rating
Lock
| NOTES |
The default security PIN is 0000.
Depending on your country,
this menu function may not be
supported.
Terms &
Conditions,
Privacy Policy
Reset Smart
Hub
Lets you view the Smart Hub Terms
and Conditions and Privacy Policy.
Resets all Smart Hub settings to
their default settings.
| NOTES |
The default security PIN is 0000.
System
Setup
Lets you re-run the Initial Settings
procedure.
Language
You can select the language you
prefer for the On-Screen menu, disc
menu, subtitles, etc.
• The language you select for the
disc menu, disc audio, or subtitles
will only appear if it is supported
on the disc.
Device
Manager
You can connect a wireless USB
keyboard or mouse to the USB port
on the front of the product.
Keyboard Settings: Lets you
configure a wireless USB keyboard
connected to the product.
English
HT-F9750W-XY-0604.indd 23
Settings
Apps Settings
Network
Lets you configure App notification
settings and view basic info about
your Apps.
Push Notification Settings :
Receive notifications from selected
services.
Properties : See basic info about
Apps.
04
Audio Sync
When the product is attached to a
digital TV, lets you adjust the audio
delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.
23 |
2013-06-04 오전 10:09:52
Settings
Change PIN: Change the 4-digit
PIN used to access security
functions.
 If you forget your PIN
| NOTES |
You can use the keyboard only
when a QWERTY keyboard
screen or window appears in the
Web Browser.
Mouse Settings: Lets you
configure a wireless USB mouse
connected to the product. You can
use the mouse in the product's
menu in the same way you use a
mouse on your PC.
 To use a mouse with the
product's menu:
1.
Connect the USB mouse to
the product.
2.
Click the primary button you
selected in Mouse Settings.
The Simple Menu appears.
Device
Manager
3.
Security
2.
Press and hold the 5 button
on the front panel for 5
seconds or more.
All settings will revert to the
factory default settings.
When the factory default settings
are restored, all the user stored
BD data is deleted.
General
Some USB HID keyboards and
mice may not be compatible with
your product.
Some HID keyboard keys may
not work.
Wired USB keyboards are not
supported.
Some applications may not be
supported.
If a wireless HID Keyboard does not
operate because of interference,
move the keyboard closer to the
product.
The default security PIN is 0000.
Enter the default PIN to access
the security function if you haven't
created your own PIN.
BD Parental Rating: Restrict
playback of Blu-ray discs with
specific ratings unless the PIN is
entered.
DVD Parental Rating: Prevents
playback of DVDs with a rating
above a specific numerical rating
you have set unless the PIN is
entered.
Remove any disc or USB
storage device.
| NOTES |
Click the menu options you
want.
| NOTES |
1.
Anynet+
(HDMI-CEC)
You can specify the display
brightness and time zone.
Front Display: Lets you change the
brightness of the front panel.
Time Zone: You can specify the
time zone that is applicable to your
area.
Menu Transparency: Adjust the
transparency of the menu box.
Anynet+ is a convenient function
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
control those products with one
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using an HDMI cable.
If you want to use an Anynet+
(HDMI-CEC) function, please follow
the instructions below.
1) Connect the product to an
Anynet+ (HDMI-CEC)-compliant
Samsung TV using HDMI Cable.
2) Set the Anynet+ (HDMI-CEC)
feature to On in both the TV and
the product.
3) Search for and then select the
product in the TV's Anynet+
(HDMI-CEC) list. For more exact
instructions, see the Anynet+
section of the TV's user's
manual.
| 24 English
HT-F9750W-XY-0604.indd 24
2013-06-04 오전 10:09:52
Remote
Management
Software
Update
Usage Mode
Contact
Samsung
Reset
When activated, lets Samsung
Call Centre agents diagnose and
fix problems with the product
remotely. Requires an active Internet
connection. Remote Management
service might not be available in
some countries.
By setting the Auto Sound Calibration (ASC) function just
once when you relocate or install the product, you can
have the product automatically recognize the distance
between speakers, levels between channels, and
frequency characteristics to create a 7.1-channel sound
field optimized for your environment.
AUX IN
FM ANT
LAN
L
OPTICAL
ASC IN
R
Settings
Support
Auto Sound Calibration
DIGITAL
AUDIO IN
SPEAKERS OUT
View DivX® VOD Registration
Codes to purchase and play DivX®
VOD contents.
04
DivX® Video
On Demand
CENTER
FRONT
SUBWOOFER
FRONT
L
R
FRON
FRON
IMPEDANCE : 3Ÿ
For more information about the
Software Update function, see
"Upgrading Software" on page 29.
Lets you set the Use mode. If you
are using the home cinema at home,
always select Home. Store is for
retail display settings only.
ASC microphone
Provides contact information for
assistance with your product.
Reverts all settings to their defaults
except for the network and Smart
Hub settings, and then starts the
Setup function. Requires that you
enter your security PIN. The default
security PIN is 0000
Auto Sound Calibration
Select whether to run and apply automatic sound
calibration.
• Off: Produces sound according to the speaker
configuration specified in speaker settings.
• On: Runs Auto Sound Calibration and produces sound
according to the calibrated speaker settings.
Measurement
Before running the calibration, make sure no disc is left in
the disc tray.
1.
Plug the ASC microphone into the ASC IN jack.
2.
Place the ASC microphone at the listening position.
• Auto Sound Calibration automatically sets up
speakers in the following sequence : Front L 
Centre  Front R  Surround R  Front Top
R  Front Top L  Surround L  Subwoofer
• Press the RETURN button to cancel the Auto
Sound Calibration Setting.
English
HT-F9750W-XY-0604.indd 25
25 |
2013-06-04 오전 10:09:53
Settings
Networks and the Internet
When you connect this product to a network, you can
use network based applications and functions such as
Smart Hub and BD-LIVE, and upgrade the product's
software through the network connection. For more
information about accessing and using Internet services,
see the Network Services chapter of this manual on
pages 44~52. Instructions for configuring the network
connection start below.
Wired - Manual
If you have a static IP address or the automatic procedure
does not work, you'll need to set the Network Settings
values manually.
After following Steps 1 to 3 above:
1.
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press the
E button.
The product searches for a network, and then
displays the connection failed message.
Configuring your Network Connection
| NOTES |
If you didn't configure your network connection during
the initial settings procedure or you need to reset the
network connection, follow the directions below.
Before you begin, contact your Internet Service Provider
to find out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless network,
we recommend using the Automatic configuration
procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you start
the configuration procedure.
To begin configuring your network connection, follow
these steps:
If it is possible to connect the home cinema to your
1.
network wirelessly, select Change Network at this
point, change the Network type to Wireless, and
then go to the instructions for wireless networks on
page 27.
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
Unable to connect to the network. Try the following: check if your IP address is
set correctly in IP Settings. Contact your Internet service provider for more
information.
In the Home screen, select Settings, and then
press the E button.
2.
Select Network, and then press the E button.
3.
Select Network Settings, and then press the E
button.
4.
Go to the instructions for Wired networks starting
below or the instructions for Wireless networks
starting on page 27.
Change Network
When it is done, highlight OK, and then press E
button.
Close
3.
Select the IP setting field, and then set it to Enter
manually.
4.
Select a value to enter (IP Address, for example),
and then press E. Use the number keypad on
your remote control to enter the numbers for the
value. You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote control
to move from entry field to entry field within a value.
When done with one value, press the E button.
5.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 4.
6.
Repeat Steps 4 and 5 until you have filled in all
values.
After following Steps 1 to 3 above:
2.
Retry
Use the ◄► buttons to select IP Settings, and
then press the E button. The IP Settings screen
appears.
Wired – Automatic
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press
the E button. The product detects the wired
connection, verifies the network connection and
then connects to the network.
IP Settings
2.
Wired Network
1.
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
| 26 English
HT-F9750W-XY-0604.indd 26
2013-06-04 오전 10:09:54
| NOTES |
4.
You can get the Network values from your Internet
04
provider.
7.
| NOTES |
You should be able to find the security code or pass
phrase on one of the set up screens you used to set
up your router or modem.
Wireless - Manual
You can setup a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network connection,
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 26:
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 26:
1.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
2.
Scroll through the list, select the desired network or
Add Network, and then press the E button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
• To display capital letters (or redisplay small letters
, and
if capital letters are displayed), select
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the E
button.
5.
On the Security type screen that appears, use the
▲▼ buttons to select the network's Security type,
and then press the E button. On the next screen,
enter your network's security code or pass phrase.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
When finished, select Done, and then press the E
button. The product searches for the network.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
Network Settings
Select your network type.
Network type
Wireless
Wireless network
si-ap
iptime
iptime5G
You can connect your Blu-ray
player to the internet. Please
select which wireless network to
use.
KIMING_VTOWER
TIAS
Refresh
Settings
When finished entering all the values, select OK,
and then press the E button. The home cinema
verifies the network connection and then connects
to the network.
Wireless Network
1.
When finished, select Done, and then press the E
button. The product verifies the network connection
and then connects to the network.
WPS(PBC)
2.
Select the desired network, and then press the E
button.
3.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing E
button.
English
HT-F9750W-XY-0604.indd 27
27 |
2013-06-04 오전 10:09:55
Settings
6.
The Network connection fail screen appears. Use
◄► buttons to select IP Settings, and then press
the E button.
1.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
7.
Select the IP setting field, and then set it to Enter
manually.
2.
Scroll the list down, select WPS(PBC), and then
press the E button.
8.
Select a network value to enter (IP Address, for
example), and then press E button. Use the
number keypad on your remote control to enter the
numbers for the value. You can also enter numbers
using the ▲▼ buttons. Use the ◄► buttons on the
remote control to move from entry field to entry field
within a value. When done with one value, press the
E button.
3.
Press the WPS(PBC) button on your router within
two minutes. Your product automatically acquires all
the network settings values it needs and connects
to your network.
The product connects to the network after the
network connection is verified.
4.
When it is done, highlight OK, and then press E
button.
9.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 8.
| NOTES |
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP security
encryption does not support WPS connection.
10. Repeat Steps 8 and 9 until you have filled in all
values.
| NOTES |
Wi-Fi Direct
You can get the Network values from your Internet
The Wi-Fi Direct function allows you to connect Wi-Fi
Direct devices to the product and each other using a
peer-to-peer network, without a wireless router.
provider.
11. When finished, select OK, and then press the E
button. The Security Screen appears.
12. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter numbers
directly using the number buttons on your remote
control. Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E button.
13. When finished, select Done at the right of the
screen, and then press the E button. The product
verifies the network connection and then connects
to the network.
14. After the home cinema verifies the network, select
OK, and then press the E button.
| NOTES |
Some Wi-Fi Direct devices may not support the
AllShare function if connected via Wi-Fi Direct. If this is
the case, change the network connection method you
used to connect the device to the home cinema.
Wi-Fi Direct transmissions can interfere with the
Bluetooth signal. Before you use the Bluetooth
function, we strongly recommend that you turn off
the Wi-Fi Direct function on any device in which it is
currently on.
1. Turn on the Wi-Fi direct device and activate its Wi-Fi
Direct function.
2.
| NOTES |
You can also begin the Manual Network setting by
going to Settings >Network > Network Status.
WPS(PBC)
One of the easiest ways to set up the wireless network
connection is using the WPS(PBC) function. If your
wireless router has a WPS(PBC) button, follow these
steps:
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 26:
In the Home screen, select Settings, and then
press the E button.
3.
Select Network, and then press the E button.
4.
Select Wi-Fi Direct, and then press the E button.
The Wi-Fi Direct devices that you can connect
appear.
| 28 English
HT-F9750W-XY-0604.indd 28
2013-06-04 오전 10:09:56
4.
Wi-Fi Direct
Device Name : [HTS]F9750W
AndroidXXXXXXX
Disconnected
The current wired or wireless network connection
Refresh
Close
5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
will be disconnected when you use the Wi-Fi Direct
function.
Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Upgrading Software
The Software Update menu allows you to upgrade the
product’s software for performance improvements or
additional services.
• Never turn the product off or back on manually
during the update process.
Each is covered below.
Through the Wi-Fi Device
1.
2.
3.
1.
On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See
the device's user manual for instructions.
In the Home menu, select Settings, and then press
the E button.
2.
Select Support, and then press the E button.
When you have completed the procedure, you
should see a pop-up on your TV screen saying that
a device that supports Wi-Fi Direct has requested to
connect. Select OK, and then press the E button
to accept.
3.
Select Software Update, and then press the E
button.
4.
To download update software and update now,
select Update now, and then press the E button.
See "Update now" on next page for details.
5.
To let the product download update software
automatically when available, select Auto update,
and then press the E button. See "Auto update"
on the next page for details.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Settings
| NOTES |
04
Select your Wi-Fi Direct device to connect to.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
| NOTES |
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
The upgrade is complete when the product turns off,
and then turns on again by itself.
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
When a system upgrade is progress, "UPDATE" is
displayed on the front panel.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device
you want to connect.
English
HT-F9750W-XY-0604.indd 29
29 |
2013-06-04 오전 10:09:57
Settings
Update now
Update by USB
You can use Update now to update the software through
your network connection or by using a USB flash drive.
The network instructions are below. The USB flash drive
instructions are on this page.
1.
Visit www.samsung.com.
2.
Click SUPPORT on the top right of the page.
3.
Enter the product's model number into the search
field. As you enter the model number, a drop down
will display products that match the model number.
4.
Left click your product's model number in the drop
down list.
5.
On the page that appears, scroll down to and then
click Firmware Manuals & Downloads.
1.
Select Update now, and then press the E button.
The Update now pop-up appears.
2.
The product searches on line for the latest software
version.
3.
If it does not find an update, the "There are no new
updates for you at the moment." pop-up appears.
Press the E button to exit.
6.
Click Firmware in the centre of the page.
Click the ZIP button in the File column on the right
side of the page.
4.
If it finds a new version, the Update Request popup appears.
7.
5.
Select OK. The product upgrades the software,
turns off, and then turns on automatically.
8.
6.
If you do not select OK or Cancel in one minute,
the product stores the new upgrade software. You
can upgrade the software later using Auto update.
Click Send in the first pop-up that appears.
Click OK in the second pop-up to download and
save the firmware file to your PC.
9.
If you select Cancel, the product cancells the
upgrade.
Unzip the zip archive to your computer. You should
have a single folder with the same name as the zip
file.
10. Copy the folder to a USB flash drive.
7.
| NOTES |
When the system upgrade is done, check the
software details in the Product Information section of
the Contact Samsung screen.
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
Auto update
You can set the Auto update function so that the product
downloads new upgrade software when it is in Auto
update mode.
In Auto update mode, the product is off, but its Internet
connection is active. This allows the product to download
upgrade software automatically, when you are not using
it.
1.
Press the ▲▼ buttons to select Auto update, and
then press the E button.
2.
Select On or Off.
3.
If you select On, the product will automatically
download new upgrade software when it is in Auto
update mode with the power off. If it downloads
new upgrade software, the product will ask you if
you want to install it when you turn the product on.
11. Make sure no disc is inserted in the product, and
then insert the USB flash drive into the USB port of
the product.
12. In the product’s menu, go to Settings > Support >
Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software,the Update
Request pop-up appears.
15. Select OK. The product upgrades the software,
turns off, and then turns on automatically.
| NOTES |
There should be no disc in the product when you
upgrade the software using the USB jack.
When the system upgrade is done, check the
software details in the Product Information section of
the Contact Samsung screen.
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
Software upgrades using the USB jack must be
performed with a USB flash drive only.
| NOTES |
To use the Auto update function, your product must
be connected to the Internet.
| 30 English
HT-F9750W-XY-0604.indd 30
2013-06-04 오전 10:09:58
Media Play
Method 1
Turn the product on.
2.
Connect the USB device to the USB port on
the front panel of the product. The New Device
Connected pop-up appears.
| NOTES |
PCs running Windows 7 and Windows 8 have DLNA
Movies & TV
V
Shows
software (Play To) built in.
Apps
New device connected.
USB Flash Disk
Media Play
1.
05
Your home cinema can play content located on Blu-ray/
DVD/CD discs, USB devices, PCs, smart phones, tablets,
and on the Web.
To play content located on your PC or a mobile device,
you must connect the PC or mobile device and the
product to your network. To play content on your PC, you
must also download and install AllShare network software
or already have DLNA network software on your PC.
Pho
Photos,
Videos
Vide
e &
Music
Muss
Photos
The All Content Screen
Videos
Music
All Content
For all media, the All Content screen or one of its sub
screens is your primary means of accessing and playing
contents saved on a variety of devices, either connected
directly or using your network.
Add App
Using the All Content Screen
| NOTES |
To access the All Content screen, select Photos, Videos
& Music on the Home screen, and then press the E
button.
3.
Add App
Add App
Web Browser
Settings
If the pop-up does not appear, go to Method 2.
Playing Commercial Discs
Use the ▲▼ buttons to select Photos, Videos,
Music or All Content, and then press the E
button. Depending on how the contents are
arranged, you will see either folders, individual files,
or both.
1.
Press the  button to open the disc tray.
| NOTES |
2.
Place a disc gently into the disc tray with the disc’s
label facing up.
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 3. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Photos, Videos & Music screen, and then going to
Step 4 in Method 2 below.
4. If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
5.
Select a file to view or play, and then press the E
button.
3.
Press the  button to close the disc tray.
Playback starts automatically.
6.
4.
If playback does not start automatically, press the
6 button on the remote or see “The All Content
Screen” above.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
7.
Go to pages 33~41 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
Playing Files on a USB Device
There are two methods you can use to play or view
multimedia files located on a USB device through your
product.
Method 2
1.
Turn the product on.
2.
Connect the USB device to the USB port on the
front panel of the product.
3.
Select Photos, Videos & Music on the Home
screen, and then press the E button.
English
HT-F9750W-XY-0604.indd 31
31 |
2013-06-04 오전 10:09:59
Media Play
4.
Select Photos, Videos, Music or All Content, and
then press the E button.
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
3.
A screen appears listing the contents of the disc.
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
4.
If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
5.
Use the ▲▼◄► buttons to select a file to view or
play, and then press the E button.
6.
Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return to the
Home screen.
Press the Exit button to return directly to the Home
Screen.
7.
Go to pages 33~41 for instructions that explain how
to control playback of videos, music, and pictures
on a disc.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 4. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Photos, Videos & Music screen and repeating Step 4.
5. Use the ◄► buttons to select the desired device
and then press the E button.
6.
If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
7.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
8.
Go to pages 33~41 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
| NOTES |
If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc"
automatically.
If your cellular phone is DLNA compatible, you can
play contents without connecting a USB cable. See
"Using the AllShare Network Function" on page 32.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded on Bluray, DVD, or CD discs.
1.
Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the tray.
The Device Connected pop-up appears.
2.
Use the ▲▼ buttons to select the type of content
you want to view or play - Photos, Videos or Music
- and then press the E button.
Using the AllShare Network
Function
AllShare lets you play Photos, Videos or Music located
on your PC or your DLNA compatible device through the
product using a wireless network connection.
To Download the AllShare Software
AllShare makes it easy to retrieve and enjoy media files
from computers and DLNA-enabled devices. However,
computers need to be installed with AllShare PC and
mobile devices need to support AllShare. For more
information, visit the Samsung Content & Service portal
(http://link.samsung.com).
| NOTES |
You may experience compatibility issues when
attempting to play media files via a third-party DLNA
server.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 2. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Home screen and repeating Step 2.
| 32 English
HT-F9750W-XY-0604.indd 32
2013-06-04 오전 10:10:03
Playing Content Located on your PC or
DLNA Device through the Product
2.
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
3.
On your computer, using the AllShare software,
confirm your phone is connected.
4.
On the phone, select the file you want to view or
play, and then select the Home cinema system as
the playback device.
5.
On the phone, start playback.
Product
Play back
PC's files
AllShare Connection
1.
Connect the product, your PC, and/or your DLNA
compatible device to the same wireless network.
2.
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
3.
Select Photos, Videos & Music on the product's
Home screen, and then press the E button. The
Photos, Videos & Music screen appears.
4.
Select the type of content you want to play Photos, Videos, Music or All Content - and then
press the E button.
5.
On the next screen, select AllShare, and then press
the E button.
6.
In the list of AllShare connected devices that
appears, select your PC or other AllShare
compatible device, and then press the E button.
A screen listing the available files appears.
7.
Select the file you want to play or view, and then
press the E button.
Controlling Video Playback
You can control the playback of video content located on
a Blu-ray/DVD disc, USB device, mobile device or PC.
Depending on the disc or contents, some of the functions
described in this manual may not be available.
Buttons on the Remote Control used
for Video Playback
DISC
MENU
0
TITLE MENU
POPUP
1
2
1 Using the disc menu, title menu, popup menu and
title list
Controlling the Playback of Content
Located on Your PC with your Smart
Phone
DISC MENU
During playback, press this button to
display the Disc menu.
TITLE
MENU
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
View button to go to the playlist.
POPUP
MENU
During playback, press this button to
display the Popup menu.
PC
Product
5V
0.5A
Play back
PC's files
AllShare
Connection
Media Play
Connect the product, your PC, and your DLNA
compatible cellular phone to the same wireless
network.
05
PC
1.
Control PC's files
to Product
Smart Phone
(Only available with Samsung phones supporting AllShare
functionality.)
English
HT-F9750W-XY-0604.indd 33
33 |
2013-06-04 오전 10:10:04
Media Play
2 Playback related buttons
The product does not play sound in Search, Slow, or
Step mode.
• To return to normal speed playback, press the 6
button.
You can use the Search Scene
function during playback to view
or start a movie from the scene of
your choice.
| NOTES |
6
If the index information in the file
Starts playback.
Fast Motion
Play
During playback, press the 3 or button.
Each time you press the 3 or button, the playback speed will
change.
is damaged or the file does not
support indexing, you will not be
able to use the Search Scene
function.
If you are using the DLNA
function after connecting to a
computer through your network,
Search Scene may not be
supported.
Slow Motion
Play
In pause mode, press the button.
Each time you press the button,
the playback speed will change.
If there is more than one movie on
the disc or device, select to start a
different title.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press the 1 or 2
button, the disc moves to the previous
or next chapter or file.
5
Stops playback.
7
Pauses playback.
Search Scene
Search Titles
1.
Select Search Titles, and
then press the E button.
2.
Use the ▲▼ buttons to select
a title, and then press the E
button.
Select to play the chapter of your
choice.
Chapter
Search
Using the TOOLS Menu
1.
Select Chapter Search, and
then press the E button.
2.
Use the ▲▼ buttons to select
a chapter, and then press the
E button.
During playback, press the TOOLS button.
Play from the
Beginning
Use 3D menu to select Side by
Side or Top Bottom option if the
3D content currently playing does
not properly appear in 3D mode.
3D
Select to play the movie from a
selected time point.
Select to return to the beginning of
the movie, and then press the E
button.
| NOTES |
Use 3D menu only for 3D
contents of Side by Side or Top
Bottom format. If applied to 2D
contents, it may not be displayed
properly.
Search Time
Bar
1.
Select Search Time Bar, and
then press the E button.
2.
Using the number buttons,
enter the time point you want
to go to, and then press the
E button.
| NOTES |
You can also use the ◄►
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each tme
you press the ◄► buttons.
| 34 English
HT-F9750W-XY-0604.indd 34
2013-06-04 오전 10:10:07
Press the ▲▼ buttons to
select Repeat A-B, and then
press the E button.
Press the E button at the
point where you want repeat
play to start (A). Let the movie
play.
2.
Press the E button at the
point where you want repeat
play to stop (B).
3.
| NOTES |
You must set point (B) at least
5 seconds of playing time after
point (A).
Picture Mode
Select to set the picture mode.
- Dynamic : Increases sharpness
and brightness.
- Standard : Choose this setting
for most viewing applications.
- Movie : The best setting for
watching movies.
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
Audio Sync
Select to set the desired audio
language.
In some cases when the product is
connected to a digital TV, the audio
signal may not synchronize with the
video signal. If this occurs, adjust
the audio delay time to match the
video signal.
Subtitle
Select to set the desired subtitle
language.
Subtitle
Settings
Select to set the desired subtitle
options.
Angle
To view a scene from another
angle. The Angle option displays
the number of angles available to
view (1/1, 1/2, 1/3, etc.).
BONUSVIEW
Video
BONUSVIEW
Audio
Media Play
1.
Repeat Mode
Audio
05
Select to repeat a title, chapter, or
specific section.
- Off : Select to return to normal
playback.
- Title : Choose to repeat a
selected title.
- Chapter : Choose to repeat a
specific chapter.
- Repeat A-B : Choose to repeat
a specific section.
Select to set the desired bonusview
option.
Full Screen
Select to set the size of the video
image. Choose Original, Mode1
(larger), or Mode2 (largest).
Information
Select to view video file information.
| NOTES |
Depending on the disc or storage device, the Tools
menu may differ.
Video files with high bit rates of 20Mbps or more strain
the product’s capabilities and may stop playing during
playback.
| NOTES |
When you use the BD wise
function, this menu will not
appear.
Equaliser
Mode
Select to use the Equaliser.
Equaliser
Settings
| NOTES |
Select to set the Equaliser.
It only appears when equaliser
mode is on.
English
HT-F9750W-XY-0604.indd 35
35 |
2013-06-04 오전 10:10:08
Media Play
Using the View & Options Menus
On the screen that lists the video files, use the ▲▼◄►
buttons to select View or Options in the upper right, and
then press the E button.
Videos
Date
View
Displays all the folders with
videos by date. If you select
a folder, and then press E
button, displays all the videos
in the folder by date.
Title
Displays all the video files on
the media or storage device
by title.
Folder
Displays all the folders on the
media or storage device.
Controlling Music Playback
You can control the playback of music content located on
a DVD, CD, USB, mobile device or PC. Depending on the
disc or contents, some of the functions described in this
manual may not be available.
Buttons on the Remote Control used
for Music Playback
1
1
4
7
DISC
MENU
Play
Selected
Play Selected lets you
create a playlist by selecting
specific files to play. It works
essentially the same way for
all media. See Creating a
Playlist from a CD on page
38.
2
5
8
0
3
6
9
TITLE MENU
POPUP
2
4
5
6
3
1
NUMBER buttons : If numbered tracks are
displayed, press the number of a track. The
selected track is played.
2
1 2 buttons : Move to the previous/next
track.
3
5 button : Stops a track.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or button.
Each time you press the 3 or button, the
playback speed will change.
5
7 button : Pause a track.
6
6 button : Plays the currently selected track.
Options
Send
Select Send to upload
selected files to apps (Picasa,
Facebook etc) or devices.
To use Send, you need to
establish an account with the
on-line site, and then log in
using the Log In function.
| NOTES |
Depending on the disc or storage device, the Options
View menus may differ. All options may not be
displayed.
The View and Options menus are usually available
when you are viewing video files on a USB flash
drive, a PC, a disc you recorded yourself, or a mobile
device. They are usually not available if you are viewing
a commercial Blu-ray, DVD, or CD disc.
| 36 English
HT-F9750W-XY-0604.indd 36
2013-06-04 오전 10:10:08
Music Screen Controls
Using the View & Options Menus
00:09
00:43
off
off
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
Music
View
Track
Displays all the music
tracks on the media or
storage device.
Album
Displays all the music on
the media or storage by
album.
Artist
Displays all the music files
on the media or storage
device by artist
Genre
Displays all music on
the media or storage by
genre.
Folder
Displays all the folders
on the media or storage
device.
Play
Selected
Play Selected lets you
create a playlist by
selecting specific files to
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on page 38.
Send
Select Send to upload
selected files to apps
(Picasa, Facebook etc)
or devices. To use Send,
you need to establish an
account with the on-line
site, and then log in using
the Log In function.
Ripping
The Ripping function
converts CD audio to the
mp3 format and saves
the converted files on a
USB device or the mobile
device connected to the
product. See Ripping on
page 39.
Pause a track.
Play a track.
Media Play
TRACK 001
00:43
05
Options
TRACK 001
On the screen that lists the music files, use the ▲▼◄►
buttons to select View or Options in the upper right, and
then press the E button.
Move to the previous track.
Move to the next track.
Rewind the track.
Advance the track.
,
1
Repeat one track or all tracks.
Play tracks in random order.
Display the Equaliser.
Adjust the equaliser manually.
(Only when equaliser mode is on)
To access the controls, play a track, and then use the
▲▼◄► buttons to move to the control of your choice.
Options
| NOTES |
The Music Screen controls are only accessible when a
track is playing.
All controls do not appear at the same time.
English
HT-F9750W-XY-0604.indd 37
37 |
2013-06-04 오전 10:10:10
Media Play
Information
Creating a Playlist from a CD
Select to see content
information.
Options
Encoding
1.
With the Playback screen displayed, select the
Options button and then press the E button. The
Options menu appears.
2.
Use the buttons to select Play Selected , and
then press the E button. The Play Selected screen
appears.
3.
Use the buttons to select a track, and then
press the E button. A check appears to the left of
the track.
4.
Repeat Step 3 to select and check additional tracks.
5.
To remove a track from the list, move to the track,
and then press the E button again. The check on
the track is removed.
6.
When done, press the buttons to select Play,
and then press the E button. The Music Playback
screen reappears listing only the tracks you
checked. The selected tracks play automatically.
Select to manage the text
encoding options.
| NOTES |
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an audio CD
(CD-DA/MP3).
1.
During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
press the E button.
2.
Use the ▲▼ to select the Repeat mode you want
- Off, One Song, or All - and then press the E
button.
| NOTES |
You can create a playlist with up to 99 tracks from
Options
TRACK 001
00:09
00:43
off
off
Audio CDs (CD-DA).
If you have created a playlist, Play Selected is
TRACK 001
00:43
TRACK 002
03:56
replaced by Edit playlist on the Options menu.
TRACK 003
04:41
TRACK 004
04:02
On the Play Selected screen, you can also choose
TRACK 005
03:43
Select All, Deselect All, and Cancel.
TRACK 006
03:40
~ Use Select All to select all tracks. This cancells
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
your individual track selections. When you press
the RETURN button on your remote or select Play
and then press the E button, all tracks will appear
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
~ Use Deselect All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN button on your remote or select Play and
then press the E button. If you do not use Select
All or select individual tracks, the Playlist will not
change.
~ Cancel cancells any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio CD
(CD-DA/MP3) at random.
1.
During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
press the E button.
2.
Use the ▲▼ to set the Shuffle mode Off or On, and
then press the E button.
| 38 English
HT-F9750W-XY-0604.indd 38
2013-06-04 오전 10:10:12
Insert a USB device into the USB jack on the front
of the product.
You can use a Bluetooth device to enjoy music with high
quality stereo sound, all without wires!
2.
With the Playback screen displayed, select the
Options button and then press the E button.
The Options menu appears.
What is Bluetooth?
3.
Use the ▲▼ buttons to select Ripping, and then
press the E button. The Ripping screen appears.
4.
Use the ▲▼ buttons to select a track, and then
press the E button. A check appears to the left of
the track.
5.
Repeat Step 4 to select and check additional tracks.
6.
To remove a track from the list, move to the track,
and then press the E button again. The check on
the track is removed.
7.
When done, select the Rip button using the ▲▼
buttons, and then press the E button.
The Rip pop-up appears.
8.
Use the ▲▼ buttons to select the device to store
the ripped files on, and then press the E button.
| NOTES |
Do not disconnect the device while ripping is in
9.
progress.
If you want to cancel ripping, press the E button
and then select Yes. Select No to continue ripping.
10. When ripping is complete, the “Successfully
Ripped.” message appears. Press the Ebutton.
11. Press the RETURN button to go back to the
Playback screen.
| NOTES |
This function is not available with DTS Audio CDs.
This function may not be supported by some discs.
Ripping encodes music to the .mp3 format at
192kbps.
On the Ripping screen, you can also choose Select
All and or Clear All.
- Use Select All to select all tracks and press the E
button. This cancells your individual track selections.
- Use Clear All to deselect all selected tracks at once.
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other easily
using a short wireless connection.
• A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth device
or the Home Cinema.
- When it is subject to electrical variation from
obstructions caused by a wall, corner or office
partitioning.
- When it is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens and wireless LANs.
• Pair the Home Cinema with the Bluetooth device while
the two are close together.
• The further the distance is between the Home Cinema
and the Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Home Cinema has an effective reception range
of up to 10 meters in all directions if there are no
obstacles. The connection will be automatically cut off
if the device is out of this range. Even within this range,
the sound quality may be degraded by obstacles such
as walls or doors.
• This wireless device may cause an electric interference
during its operation.
Media Play
Using Bluetooth
1.
05
Ripping
To connect the Home Cinema to a
Bluetooth device
Connect
Bluetooth device
Check if the Bluetooth device supports the Bluetooth
compliant stereo headset function.
English
HT-F9750W-XY-0604.indd 39
39 |
2013-06-04 오전 10:10:14
Media Play
1.
Press the FUNCTION button on the remote control
of the product to display the BT message.
2.
Select the Bluetooth menu on the Bluetooth device
you want to connect. For instructions, refer to the
Bluetooth device's manual.
3.
Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of devices.
4.
Select "[HTS]Fxxxxx" from the searched list.
• When the Home Cinema is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home cinema will appear on the front
display of home cinema.
5.
Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
| NOTES |
The Home Cinema only supports Middle Quality SBC
data (up to 237kbps@48kHz), and does not support
High Quality SBC data (328kbps@44.1kHz).
The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
Connect only to a Bluetooth device that supports the
A2DP Profile.
Only one Bluetooth device can be paired at a time.
The search or connection functions may not work
properly in the following cases:
- If there a strong electric field near or around the
home cinema.
- If several Bluetooth devices are simultaneously
paired with product.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
To disconnect the Bluetooth device from
the Home Cinema
You can disconnect the Bluetooth device from the Home
Cinema. For instructions, refer to the Bluetooth device's
manual.
• When the Home Cinema is disconnected from the
Bluetooth device, the Home Cinema will display
DISCONNECTED on the front display.
To disconnect the Home Cinema from the
Bluetooth device
Press the (
) button on the front panel of the Home
Cinema to switch from BT to another mode or turn off
the Home Cinema.
• Except when you disconnect the home cinema by
changing functions, the connected Bluetooth device
will wait a certain time for a response from the
Home Cinema before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device.)
| NOTES |
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Home Cinema System and the Bluetooth device
exceeds 10 meters. When the Bluetooth device
comes back into effective range or you restart the
Bluetooth device, you have to pair the device and
home cinema again to reconnect.
In Bluetooth mode, the screen saver will start if
the Bluetooth device stays in the Ready state for 5
minutes. To reconnect the Bluetooth device, turn off
the screen saver, and then connect the device. To turn
off the Screen saver, press any button on the remote
control (the Volume button, a number button, etc.)
Playing Photo Contents
You can play photo contents located on a DVD, USB,
mobile device or PC.
Using the Tools Menu
During playback, press the TOOLS button.
Previous
Select to move to the previous
picture.
Next
Select to move to the next picture.
Start / Stop
Slide Show
Select to play/pause the slide show.
Slideshow
Settings
 Speed : Select to set a slide
show's speed.
 Effects : Select to set a slide
show's special effects.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
| 40 English
HT-F9750W-XY-0604.indd 40
2013-06-04 오전 10:10:14
Rotate
Select to listen to music while
viewing a slide show.
 Picture Mode
- Dynamic : Choose to increase
Sharpness.
- Standard : Choose for most
viewing applications.
- Movie : This is the best setting
for watching movies.
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
 Information : Shows the picture
information.
Equaliser
Mode
Customize your own personal
sound preferences using the
equaliser settings.
Equaliser
Settings
This function is only available when
Equaliser Mode is On.
Slide Show
Options
| NOTES |
Depending on the disc or storage device, the Options
Displays all the folders
on the media or storage
device.
Starts the slide show.
Shows all the files in the
current folder, one after
another. If you want to
create a slide show with a
selected group of photos,
see Play Selected below.
Play
Selected
Play Selected lets you
create a playlist by
selecting specific files to
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on page 38.
Send
Select Send to upload
selected files to on line
sites (Picasa, Facebook
etc) or devices. To use
Send, you need to
establish an account with
the on-line site, and then
log in using the Log In
function.
Media Play
Settings
Folder
05
Background
Music
Select to rotate the picture. (This will
rotate the picture either clockwise
or counter clockwise.)
menu may differ. All options may not be displayed.
To enable the background music function, the photo
| NOTES |
file must be in the same storage media as the music
file. However, the sound quality can be affected by the
bit rate of the MP3 file, the size of the photo, and the
encoding method.
You can't enlarge the subtitle and PG graphic in the
full screen mode.
Depending on the disc or storage device, the Options
Using the View and Options Menus
When you See the Photo File List
Photos
Date
Groups all the photo files
on the media or storage
device by Date. Click a
group to see the photos in
that group.
Title
Displays all the photo files
on the media or storage
device by title.
View
menu may differ. All options may not be displayed.
Listening to Radio
Using Buttons on the Remote Control
1.
Press the FUNCTION button to select FM.
2.
Tune to the desired station.
• Preset Tuning 1 : Press the 5 button to select
Preset and then press the TUNING/CH (,.)
button to select the preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory. See page 42 for instruction.
English
HT-F9750W-XY-0604.indd 41
41 |
2013-06-04 오전 10:10:15
Media Play
• Manual Tuning : Press the 5 button to select
Manual and then press the TUNING/CH (,.)
button to tune to a lower or higher frequency.
• Automatic Tuning : Press the 5 button to select
Manual and then press and hold the TUNING/
CH (,.) button to automatically search the
band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Using the Special Effects Remote
Control Buttons
SOUND EFFECT Function
SOUND
EFFECT
Lets you select a mode that optimizes the sound.
1.
Press the SOUND EFFECT button.
2.
Press the ▲▼ button to select the desired mode:
DSP, Dolby Pro Logic II or SFE Mode.
3.
Press the ◄► buttons to select the desired
sound effect.
Presetting Stations
DSP
Example : Presetting FM 89.10 into memory.
MP3 Enhancer  Power Bass  Football  Off
• MP3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
1.
Press the FUNCTION button to select FM.
2.
Press the TUNING/CH (,.) button to select
<89.10>.
3.
Press the TUNER MEMORY button.
• NUMBER flashes on the display.
Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its own.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
4.
5.
To preset another station, repeat steps 2 to 4.
• To tune to a preset station, press the 5 button
to select Preset and then press the TUNING/CH
(,.) button to select the preset station.
• Power Bass : Increases the volume level of bass
tones and provides thudding sound effects.
• Football : Creates a more dynamic, realistic,
stadium like sound. For listening to football, soccer,
and other sporting events.
• Off : Select for normal listening.
Dolby Pro Logic II
Movie  Music  Game  Matrix  Pro Logic 
Off
• Movie : Adds realism to a movie soundtrack.
• Music : When listening to music, you can
experience sound effects as if you are listening to
the actual performance.
• Game : Enhances the excitement of a game’s
sound.
• Matrix : Select to hear multi channel surround
sound.
• Pro Logic : Select to listen to a 2CH sound source
in 5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending
on the input signal.
• Off : Select for normal listening.
| 42 English
HT-F9750W-XY-0604.indd 42
2013-06-04 오전 10:10:16
SFE Mode
4.
3D
SOUND
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off  High  Low
| NOTES |
Use in this case:
Media Play
3D Sound
Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D. IN.
- TV SOUND ON : Output to Home theatre
speakers.
- TV SOUND OFF : Output to Anynet+
connected TV Speaker.
05
Symphony Hall in Boston (Hall 1)  Philharmonic
Hall in Bratislava (Hall 2)  Jazz Club in Seoul B
 Church in Seoul  Amphitheater (Rock)  Off
• Symphony Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
• Philharmonic Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert
hall but, less powerful than HALL1.
• Jazz Club in Seoul B : Recommended setting for
Jazz.
• Church in Seoul : Gives the feel of being in a
grand church.
• Amphitheater (Rock) : Recommended setting for
Rock.
• Off : Select this for normal listening.
1) If you want to listen to the sound via home
cinema speaker when you watch a TV.
2) If you want to listen to the sound from the USB
media that plugged to the TV via home cinema
speaker.
TV SOUND ON/OFF support specification
Connected TV
Anynet+
(HDMI-CEC)
supported TV
Anynet+
(HDMI-CEC) not
supported TV
Anynet+
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
ON
O
O
OFF
O
X
No operation
O
X
English
43 |
3D Sound is not available in FM mode.
TV Sound
TV
SOUND
You can listen via Home theatre speakers or TV
Speaker with TV SOUND button.
1.
Connect the HDMI cable to TV and Home
cinema. (See page 18)
2.
Set the connected Home cinema and TV to
Anynet+ (HDMI-CEC) On.
3.
Press the TV SOUND button on the remote
control.
HT-F9750W-XY-0604.indd 43
2013-06-04 오전 10:10:16
Network Services
You can enjoy various network services such as streaming
video or on-line apps by connecting the product to your
network.
To use network services, you must first:
1.
Connect the product to the network.
(See page 19)
2.
Configure the network settings.
(See pages 26~28)
If you press the RED (A) button after you have logged
in, the My Account pop-up appears. On the pop-up,
you can select Logout, Change Account Information,
Link Service Accounts, Remove Accounts from the
Device, and Deactivate Account.
To rent movies and purchase for pay apps,you must
have a credit card registered in your account. If you
haven’t registered a card, select Change Account
Information. On the Change Account information
page, select Register Card, press the E button,
and then follow the directions on the screen.
Logging In to Your Samsung
Account
Before you access Movies & TV Shows or Apps, we
suggest you log in to your Samsung account.
To log in to your Samsung account, follow these steps:
1.
With the Home screen displayed, press the RED (A)
button. The Log In screen appears.
2.
Select the Email field, and then press the E
button. The keyboard pop-up appears.
3.
Using the keyboard, enter your e-mail address.
When finished, select the Done button, and then
press the E button. The Log In screen re-appears.
4.
5.
Before Using Movies & TV Shows
or Apps
If you haven’t set up Smart Hub, when you use Movies &
TV Shows or Apps for the first time, the product will ask
you to perform the Smart Hub set up procedure.
1.
On the Home screen, select either Movies & TV
Shows or Apps, and then press the E button. If
you have selected Apps, go to Step 4.
2.
If you selected Movies & TV Shows, the Smart Hub
pop-up appears asking if you want to set up Smart
Hub. Select Yes, and then press the E button.
The Welcome screen appears.
Select the Password field, and then press the E
button. The keyboard pop-up appears.
3.
Using the keyboard, enter your password. When
finished, select the Done button, and then press the
E button. The Log In screen re-appears.
Select Start, and then press the E button. The
Smart Hub Terms & Conditions, Privacy Policy
screen appears.
4.
On the Smart Hub Terms & Conditions, Privacy
Policy screen, you must review and agree to both
the Smart Hub Terms and Conditions and the
Privacy Policy to use Smart Hub.
5.
Scroll down, and then click the View Details buttons
to review the full documents.
6.
When done reading, scroll up to the first entry field,
and press the E button to agree to the Terms and
Conditions and consent to the Privacy Policy.
7.
Press the ► button twice to go to the Supplemental
Privacy Notices screen.
8.
Click the View Details button to view the entire
notice.
9.
When done reading, scroll up to the top entry field,
and then press the E button.
6.
To make the log in process easier next time, select
Sign me in automatically, and then press the E
button.
7.
Select Log in, and then press the E button. The
product logs you in to your account. Your account
e-mail is displayed on the bottom left of the screen.
| NOTES |
If you selected Sign me in automatically, the next
time you log in, the product will automatically enter
your e-mail and password. All you need to do is select
Log In.
If your e-mail address and password are not displayed
when the Log In screen appears, select the button
with the down pointing arrow head next to the Email
field, and then press the E button. A drop down list
of all your registered accounts will appear. Select your
account, and then press the E button. The product
will fill in the e-mail and password fields.
| NOTES |
You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
10. Press the ► button twice. The Setup Complete
screen appears. Press the E button.
| 44 English
HT-F9750W-XY-0604.indd 44
2013-06-04 오전 10:10:18
If you don't have a credit card associated with your
Using Movies & TV Shows
Samsung account, after you log in, the Register
Card screen will appear. Follow the directions on the
screen. You must have a credit card registered to your
account to rent movies and to purchase for-pay apps.
Featured
Using Apps
Recommended
You can download the applications from the Internet, and
access various for pay or free-of-charge application and
view them on your TV. To access some applications, you
need to have a Samsung account.
Network Services
Movies & TV Shows
06
You can download or stream for pay and free-of-charge
movies and TV shows and view them on your TV.
The Apps Screen at a Glance
Favourites
Featured
Movies
TV Shows
1
Purchased
2
Apps
1.
On the Home screen, select Movies & TV Shows,
and then press the E button.
2.
Select one of the Featured or Recommended
movies, and then press the E button. The page
for that movie appears.
OR
Recommended
1
2
3
4
5
Samsung
TV
My Apps
Web Browser
Apps
Apps
Use the ▼ button to go to the bottom of the screen.
Select Favourites, Featured, Movies, TV Shows,
or Purchased, and then press the E button.
On the page that appears, use the ▲▼◄► buttons
to select a show or movie, and then press the E
button.
On the TV Shows or Movies screen, you can also
select What's New?, Most Popular, or Genres to
see more available shows or movies. On the Genre
screen, use the ▲▼◄► buttons to select a Genre,
and then press the E button.
More Apps
3
1
Recommended : Displays recommended
contents managed by Samsung.
Gives you access to various for pay or free-ofcharge applications you can download.
2
Featured Applications : Use the ▲▼◄►
buttons to highlight the displayed Feature
Application, and then press the E button.
Information about the featured application
appears.
3
My Apps : Displays your personal gallery of
applications modifiable on the More Apps
screen.
4
More Apps : Select More Apps to access
the More Apps screen where you can add to,
modify, and delete applications and see all
downloaded applications.
To make a selection on a page displaying TV shows
or movies, use the ▲▼◄► buttons to make a
selection, and then press the E button.
3.
To watch a selection, select Watch Now, and then
press the E button. A selection screen appears
listing various locations from which you can rent the
film along with prices.
4.
Select a location, and then press the E button.
Follow the directions on the screen to start the
movie.
| NOTES |
If you haven't logged into your Samsung account,
the Log in screen will appear after Step 3 and you will
need to log in.
4
English
HT-F9750W-XY-0604.indd 45
45 |
2013-06-04 오전 10:10:19
Network Services
Downloading Applications
Starting an Application
You can download for pay or free-of-charge applications
through Samsung Apps.
1.
Select Apps on the Home screen, and then press
the E button.
1.
On the Apps screen, select Samsung Apps, and
then press the E button. The Samsung Apps
screen appears.
2.
On the Apps screen, use the ▲▼◄► buttons to
select an app, and then press the E button. The
app starts.
2.
Across the top of the screen, under What's
New?, you'll see a series of new apps. Use the
◄► buttons to scroll the list right or left, and
then select an app. Press the E button to see
more information about the app. If the app is free,
select Download, and then press the E button
to download the app. If it is a for-pay app select
Buy, press the E button, and then follow the
instructions on the screen.
Using the More Apps Screen
More Apps
View : Date Downloaded
Options
1 /23
WebBrowser
| NOTES |
Samsung Apps
To buy an app, you must be logged into your
Samsung account and have a credit card registered to
the account. Press the RED (A) button on your remote
to log in.
If you haven’t registered a card, after you log in, press
the RED (A) button again, and then select Change
Account Information in the pop-up that appears. On
the Change Account information page, select Register
Card, press the E button, and then follow the
directions on the screen.
You can also access and download apps from
the categories listed on the left of the screen. For
instructions, see Step 4.
3. After the app has downloaded, select Run, and
then press the E button to run the app now.
To run the app later, press the RETURN button. In
either case, the icon for the app will appear on the
Apps screen.
4.
To see additional apps, use the ▲▼◄► buttons
to move to the category list on the left side of the
screen.
WebBrowser
Storage
Category : XXXXX | Version : X.XXX | Size : XX.XKB
109.48 MB / 629.43 MB
The More Apps Screen lists all the apps you have
downloaded and lets you:
• Sort the apps on the More Apps screen by Date
Downloaded, Recently Opened, and Title.
• Apply a number of Options Menu functions to the
apps listed in the My Apps section of the Apps screen
including updating apps, moving apps into a folder,
deleting the apps from My Apps, and locking the apps.
• Start apps.
Sorting the Apps
To sort the apps on the More Apps screen, follow these
steps:
1.
On the Home screen, select Apps, and then press
the E button.
5.
Use the ▲▼ buttons to select a category. Each
time you move the highlight to another category, a
different set of applications appears on the right.
2.
On the Apps screen, use the ▼ button to move to
the More Apps hotspot at the bottom of the page,
and then press the E button.
6.
Use the ► button to move to the applications and
the ▲▼◄► buttons to move from app to app.
3.
7.
To see more information about an app, select it, and
then press the E button.
On the More Apps screen, use the ▲► buttons to
move to View at the top of the screen, and then
press the E button.
4.
8.
To download the app, follow the directions in Steps
2 and 3.
In the drop down that appears, select Date
Downloaded, Recently Opened, or Title, and then
press the E button. The apps on the More Apps
screen are sorted by the criteria you have chosen.
| 46 English
HT-F9750W-XY-0604.indd 46
2013-06-04 오전 10:10:23
Using the Options Menu Functions
Delete an App from My Apps
Using the Lock/Unlock function and the Security PIN, you
can lock applications so they cannot be started on either
the Apps screen or the More Apps screen. The default
PIN is 0000.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
3.
Select the app you want to delete from My Apps,
press the E button, and then press the ▲▼◄►
buttons in the direction of the .
The Remove from My Apps pop-up appears.
2.
Select Lock/Unlock, and then press the E
button.
3.
When the Lock Service appears, enter the PIN
using the number buttons on your remote control.
4.
To lock an application, select the application, and
then press the E button. A lock appears on the
app. Repeat to lock other, individual apps.
5.
To unlock a locked app, select the application, and
then press the E button.
6.
To lock all the apps at once, use the ▲► buttons to
select the Lock All button, and then press the E
button.
7.
To unlock all the locked apps at once, use the ▲►
buttons to select the Unlock All button and then
press the E button.
8.
Press the RETURN button twice to return to the
Apps screen. Locked apps will display a lock on the
upper right side.
4.
Select Yes, and then press the E button.
5.
When you return to the Apps screen, the app will
have been removed from the My Apps area.
Move an App in My Apps
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
3.
Select the app you want to move in My Apps, press
the E button, and then press the ▲▼◄► buttons
to move the app icon in the direction of one of the
arrows (<, >, ^, etc.) that appears around the app
icon. The app icon moves in the direction you have
chosen.
4.
After you have placed the app icon where you want,
press the E button.
5.
When you return to the Apps screen, the app will be
positioned in the location you had selected.
Edit My Apps
Edit My Apps lets you add apps to and delete apps from
My Apps. It also lets you change the position of an app in
My Apps.
Add an App to My Apps
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
3.
Select a full colour app from the top row of apps,
and then press the E button. The full colour app
icon appears in the My Apps area below and the
app icon in the top row is grayed out.
| NOTES |
Create Folder
Create Folder lets you create a folder on the More Apps
screen into which you can put apps.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Create Folder, and then press the E
button. The Set Folder Name pop-up appears.
3.
Press the E button. The keyboard appears.
4.
Select the Clear button on the right side, and then
press the E button to remove Folder 1 from the
entry field. Then, using the keyboard, enter the
name you want to apply to the folder.
5.
When finished, select the Done button on the right
side, and then press the E button. The pop-up
reappears.
6.
Select OK, and then press the E button. The new
folder appears in the list of apps on the left side of
the screen.
Grayed out apps are already in My Apps.
4.
When you return to the Apps screen, the app will
appear in the My Apps area.
English
HT-F9750W-XY-0604.indd 47
Network Services
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
06
1.
Lock/Unlock
47 |
2013-06-04 오전 10:10:26
Network Services
Move to Folder
6.
Select OK, and then press the E button. The
folder is renamed.
Move to Folder lets you move apps to the folder of your
choice.
7.
Select Close on the right side of the screen, and
then press the E button.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Move to Folder, and then press the E
button. The Move to Folder screen appears.
3.
Use the ▲▼◄► buttons to move to an app, and
then press the E button to select the app. A
check appears in the upper left corner of the app.
4.
To deselect an app, press the E button. The
check disappears.
5.
Repeat Step 3 to select additional apps.
Delete
Delete lets you delete apps and folders from the My
Apps screen. If there are apps in a folder, both the folder
and the apps are deleted together. Delete removes apps
permanently. If you decide you want to use an app you
deleted, you will need to download it again.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Delete, and then press the E button. The
Delete screen appears.
To select all the downloaded apps, select Select All
3.
at the top right of the screen, and then press the E
button. To deselect all the apps, select Deselect All
at the top right of the screen, and then press the E
button.
6. When done, select Select folder at the top of the
screen, and then press the E button. The Select
Folder pop-up appears.
Use the ▲▼◄► buttons to move to an app, or
folder and then press the E button to select. A
check appears in the upper left corner of the app or
folder you selected.
4.
To deselect an app, press the E button. The
check disappears.
5.
Repeat Step 3 to select additional apps or folders.
| NOTES |
7.
In the Select Folder pop-up, use the ▲▼ buttons
to select the folder you want to move the apps you
selected to, and then press the E button.
8.
The Apps Moved pop up appears. Press the E
button.
9.
To open the folder, use the ▲▼◄► buttons to
highlight the folder, and then press the E button.
Rename Folder
| NOTES |
To select all the downloaded apps, select Select All
at the top right of the screen, and then press the E
button. To deselect all the apps, select Deselect All
at the top right of the screen, and then press the E
button.
6. After you have made all your selections, select
Delete at the top of the screen, and then press the
E button. The deleting pop-up appears.
7.
Rename Folder lets you rename an existing folder.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Rename Folder, and then press the E
button. The Rename Folder screen appears, and a
folder is highlighted.
3.
User the ▲▼◄► buttons to highlight a folder of
your choice, and then press the E button. The
Rename pop-up appears.
4.
Press the E button. The keyboard appears.
5.
Enter the new name for the folder. When finished,
select Done on the right side, and then press
the E button. The Rename popup reappears
displaying the new name.
Select Yes, and then press the E button. All the
apps you selected are deleted.
| NOTES |
You cannot immediately delete a locked app or
folder. If you select a locked app or folder to delete,
when you perform Step 7, the Lock Service pop-up
appears. Enter the Security PIN into the pop-up, and
then press the E button. The lock will be released
and the app or folder will be deleted.
Update Apps
Update Apps automatically searches the Internet for
updated versions of the apps you have downloaded and
updates them if it finds newer versions.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
| 48 English
HT-F9750W-XY-0604.indd 48
2013-06-04 오전 10:10:29
3.
The unit searches the Internet for newer versions of
your apps. If there are new apps, the Update Apps
pop-up appears.
4.
To download the update for a particular app,
highlight the app, and then press the E button.
A check appears to the left of the app.
5.
To deselect the app, highlight it, and then press the
E button.
Bluetooth transmissions can interfere with the Screen
Mirroring signal. Before using the Screen Mirroring
function, we strongly recommend that you turn off
the Bluetooth function on your smart phone or smart
device.
Using the Web Browser
| NOTES |
You can access the Internet using the Web Browser
application.
Select Web Browser on the Home screen, and then
press the E button.
To select all the updates, select Select All on the
| NOTES |
right of the pop-up, and then press the E button. To
deselect all the updates, select Deselect All, and then
press the E button.
6. After you have selected the updates you want to
download, select Update on the right side of the
pop-up, and then press the E button.
7.
The unit downloads the updates you have chosen.
A download bar appears in each app icon as the
update for that app is downloaded. The download
is complete when the download bars disappear.
Screen Mirroring
The Screen Mirroring function lets you view the screen
of your smart phone or smart device on the TV you have
connected to the home cinema system.
1.
With the Blu-ray's Home screen displayed, press
the BLUE (D) button on the remote. The Screen
Mirroring pop-up appears.
2.
Launch AllShare Cast on your device.
3.
On your device, find the name of the home cinema
system in the list of available devices and then
select it.
4.
The TV displays a connecting message (for
example, Connecting to Android_92gb...) and then
displays the connected message.
5.
In a few moments, the screen of your device
appears on the TV screen.
When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV and BD Wise is on - the browser is maximized to fill
the screen and the TV's resolution is set to the optimal
resolution automatically.
The Web Browser is not compatible with Java
applications.
If you attempt to download a file, and the file cannot
be saved, an error message will appear.
E-commerce (purchasing products online) is not
supported.
ActiveX is not supported.
Access may be blocked to some websites or to web
browsers operated by certain businesses.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you launch
the browser for the first time, Pointer Browsing is active.
If you are using a mouse to navigate in the Web Browser,
we recommend leaving Pointer Browsing active. If you
are using your remote to navigate in the Web Browser,
we recommend that you replace Pointer Browsing with
Link Browsing. Link Browsing moves a highlight from one
link to the next in the Web Browser and is much faster
than Pointer Browsing if you are using your remote.
To activate Link Browsing, follow these steps:
1.
Use the ▲▼◄► buttons on your remote to move
the pointer to the Link Browser icon on the top right
of the screen. The Link Browser icon is the third
icon from the right.
The pointer will be in the correct position if the icon
turns blue and the words “Link Browsing” appear
on the screen.
2.
Press the E button. Link Browsing is activated
and will remain active whenever you bring up the
Web Browser.
| NOTES |
When you are using the Screen Mirroring function,
video stuttering or audio dropouts may occur,
depending on your environment.
You can connect to a device that supports AllShare
Cast. Note that connecting to such a device may not
be fully supported depending on the manufacturer.
For further information on mobile connection support,
refer to the manufacturer’s web site.
English
HT-F9750W-XY-0604.indd 49
Network Services
Select Update Apps, and then press the E
button.
06
2.
49 |
2013-06-04 오전 10:10:29
Network Services
The Control Panel at a Glance
Using the Keyboard Pop-up
The Control Panel, which runs across the top of the
screen, has a series of icons which start a number of
useful functions. The icons are described below, starting
with the icon on the far left of the screen.
When you click the http://www.samsung.com
, the
or access a data or text entry field, and
then press the E button, the keyboard pop-up appears.
http://www.samsung.com
100%
1
http://www.samsung.com
100%
As you enter characters, recommended text will be shown.
Caps
123#&
1
2
3
4
5
6
7
8
9
0
q
w
e
r
t
y
u
i
o
p
^
*

a
s
d
f
g
h
j
k
l
~
@
!
Done
z
x
c
v
b
n
m
,
Cancel
ENG
www. .com
Clear
.
?
-

/

4

To use the keyboard pop-up with your remote, follow
these steps:
•
•
•
•
•
•
1
•
•
•
•
•
•
•
: Moves to the previous page.
: Moves to the next web page.
: Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and
delete bookmarks. You can also view your
browsing history and select a page to revisit.
: Moves to the Home screen of the Web
Browser.
http://www.samsung.com
: Lets you enter a
page address manually using the keyboard
pop-up.
: Reloads the current page so that it is
refreshed on the screen.
: Adds the current page to your
bookmarks.
: Lets you search for
information by entering words or characters
using the keyboard pop-up. See Using the
Keyboard Popup on this page.
100% : Lets you enlarge or shrink the
screen by various percentages.
: Turns on the PIP function.
: Lets you switch between Pointer
Browsing and Link Browsing.
: Lets you configure the Browser’s
settings. See Using the Setting Menu on
page 51.
: Closes the Web Browser.
1.
Use the ▲▼◄► buttons on your remote to move
the highlight to a letter or number of your choice.
2.
Press the E button to enter the letter or number
into the entry field.
3.
To access capital letters, move the highlight to the
Caps key on the top left, and then press the E
button. Press the E button again with the Caps
key highlighted to access small letters again.
4.
To access symbols and additional punctuation
marks, highlight the 123#& button on the left, and
then press the E button.
5.
To delete a character you entered, move the
highlight to the button, and then press the E
button.
6.
To delete all the characters you entered, move the
highlight to the Clear button, and then press the
E button.
7.
When finished entering, move the highlight to the
Done button, and then press the E button.
| NOTES |
If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note
that the wireless keyboard will work only when the
keyboard popup appears and can only be used to
enter letters, numbers, symbols, and punctuation.
| 50 English
HT-F9750W-XY-0604.indd 50
2013-06-04 오전 10:10:30
Options on the Keyboard Pop-Up
Select the language for the
keyboard. You can select English,
French, Russian, etc.
Recommended
Text
The keyboard will suggest
recommended words as you enter
text. You can turn this function On
or Off.
Predict Next
Letter
The keyboard will predict the next
letter as you enter letters. The
predictions appear in a ring around
the letter you have just entered.
You can select a predicted letter or
move to another letter. You can turn
this function On or Off.
Private
browsing
on/off
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the
URLs of sites you visit. If you want
to enable Privacy mode, select OK.
If the Privacy mode is running, the
“Stop” icon appears in front of
the URL at the top of the screen.
To disable Privacy mode, select
it again when Privacy mode is
enabled.
Using the Setting Menu
The Setting menu contains functions that control how
the Browser operates and Browser security functions.
icon in the
To open the Setting menu, highlight the
Control Panel, and then press the E button. To select
an option in the setting menu, highlight the option, and
then press the E button.
http://www.samsung.com
100%
Enable Grabbing
Approved Sites
Private browsing on
Web Browser Settings
Help
Close
Enable/
Disable
Grabbing
Network Services
Language
06
Approved
Sites
Lets you restrict your children’s
access to inappropriate web pages
by allowing access only to the web
sites you have registered.
Every time you access Approved
Sites, the PIN screen appears. The
first time you access Approved
Sites, enter the default PIN, 0000
using the number buttons on your
remote.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
 Approved Sites feature : Turns
the Approved Sites function on
or off.
 Reset password for Approved
Sites : Change the Approved
Sites password.
 Add current site : Lets you add
the currently displayed web site
to the Approved Sites list.
 Manage Approved Sites : Lets
you key in URLs to add to the
Approved Sites List and delete
sites from the Approved Sites
list. If you turn Approved Sites
on and have not added any sites
to the Approved Sites list, you
will not be able to access any
Internet sites.
To access the keyboard pop-up options, highlight the
button on the bottom left of the keyboard, and then press
the E button.
Turns the Grabber function On and
Off. When the Grabber function is
on, you can move a web page up
and down without dragging the
scroll bar.
The Grabber function is only
available in Pointer Browsing.
English
HT-F9750W-XY-0604.indd 51
51 |
2013-06-04 오전 10:10:33
Network Services
Web Browser
Settings
Help
 Set as homepage : You can set
the Browser's home page.
 Pop-up Block : Turns the Popup
Block on and off.
 Ad Block : You can determine
whether to block advertisements
and select the URLs for which
advertisements are blocked.
 General : You can delete
personal in information such as
website history and browsing
data (cookies, etc.), and reset
all web browser settings to their
factory defaults.
 Encoding : You can set the
Encoding setting for web pages
to Automatic or select the
encoding format manually from a
list.
 Pointer : You can set the speed
of the cursor when the cursor
is set to Pointer and turn Smart
Cursor On and Off.
 Browser Information : Displays
the version number and copyright
information for the Web Browser.
Provides basic information about
the operation of the Web Browser.
| NOTES |
4.
5.
Select Register, and then press the E button.
6.
In the ID and Password screen, enter the ID you use
to log in to the service you selected using the popup keyboard. When finished, select Done, and then
press the E button.
7.
Repeat the same process for the password. When
finished select Done, and then press the E
button.
8.
Select OK, and then press the E button.
BD-LIVE™
Once the product is connected to your network, you can
enjoy various movie-related service contents available on
BD-LIVE compliant discs.
1.
Attach a USB flash drive to the USB jack on the
front of the product, and then check its remaining
memory. The memory device must have at least
1GB of free space to accommodate the BD-LIVE
services.
2.
Select Settings on the Home screen, and then
press the E button.
3.
Select Network, and then press the E button.
4.
Select BD-Live Settings, and then press the E
button.
5.
Select BD Data Management, and then press the
E button.
6.
Select Select Device, and then press the E
button.
7.
Select USB device, and then press the E button.
8.
Insert a Blu-ray Disc that supports BD-LIVE.
9.
Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
Depending on the web site, some of the Web Browser
Setting functions may not be activated. Functions that
are not activated are greyed out and cannot be used.
Linking your Internet Service
Accounts to the Product
The Link Service Accounts function lets you link your
product to your accounts with Internet services that the
product can log you in to the service automatically when
you start the app for that service.
To create a service account link, follow these steps:
1.
On the Home screen, press the RED (A) button on
your remote to log in to your Samsung Account.
2.
After you have logged in, press the RED (A) button
on your remote again.
3.
Select Link Service Accounts in the My Account
pop-up, and then press the E button.
On the Link Service Accounts screen, select the
service you want to link to the product, and then
press the E button.
| NOTES |
The way you use BD-LIVE and the provided contents
may differ, depending on the disc manufacturer.
| 52 English
HT-F9750W-XY-0604.indd 52
2013-06-04 오전 10:10:34
Appendix
Additional Information
HDMI OUT
• Certain HDMI output resolutions may not work,
depending on your TV.
• You must have a HDMI connection to enjoy videos
with 3D technology.
• A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Colour to Off in the menu.
Settings
3D Settings
• For some 3D discs, to stop a movie during 3D
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once. The
Blu-ray menu appears. Press the 5 button again,
then select 3D Settings in the Blu-ray menu.
• Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios
may not be available.
• If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does
not support BD Wise, you can not use the BD Wise
function.
• For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
BD-Live Internet Connection
• The Internet connection may be restricted while you
are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does
not support CEC.
• If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
• In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
• Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
USB 2.0 protocol with 4 MB/sec or faster read/write
speed.
• The Resume Play function may not work after you
format the storage device.
• The total memory available to BD Data Management
may differ, depending on the conditions.
English
HT-F9750W-XY-0604.indd 53
Appendix
Connections
• Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
• This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
• Digital Output can be activated when Speaker
Selection is set to TV Speaker.
07
Notes
Digital Output
53 |
2013-06-04 오전 10:10:36
Appendix
DivX® Video On Demand
Selecting the Audio Language
• For more information about DivX(R) VOD, visit
“http://vod.divx.com”.
• The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
• Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio soundtrack in
English.
Front Display
• You cannot change the brightness of the
and the VOL +, - button.
button
Speaker Settings
• When Speaker Selection is set to TV Speaker,
audio is produced through the TV speakers.
• Running the Auto Sound Calibration function takes
about 3 minutes.
• Make sure there is no disc in the product when you
run the Auto Sound Calibration function.
• If the ASC microphone is disconnected during the
Auto Sound Calibration setup, the setup will be
cancelled.
• When the Auto Sound Calibration function is
activated, the DSP, Dolby Pro Logic ll and SFE
Mode will not work.
• If the product is connected to external devices or
other components (such as an AUX, D. IN), the Auto
Sound Calibration Setup may not work properly.
HDMI audio
• When HDMI audio is output to the TV speakers, it is
automatically down-mixed to 2 channels.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility problem.
• The ARC function is only available if an ARCcompliant TV is connected.
Playback
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and
secondary subtitles at the same time.
• The total number of primary and secondary subtitles
are displayed respectively.
Playing JPEG files
• You can’t enlarge the subtitle and PG graphic in the
full screen mode.
Media Play
Dolby Pro Logic II Mode
• Before selecting Dolby Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks (L
and R) on the product. If you connect to only one
of the inputs (L or R), you cannot listen to surround
sound.
Playing Video files
Using the TOOLS button while playing pictures
• Video files with high bit rates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
• If the system is connected to a BD Wise compliant
TV that has set BD Wise to On, the Picture Settings
menu will not appear.
• The Background Music function will not work unless
the music file and the photo file are located on the
same storage media. Also, sound quality can be
impacted by the bit rate of the MP3 music file, the
size of the photos, and the encoding method.
| 54 English
HT-F9750W-XY-0604.indd 54
2013-06-04 오전 10:10:37
Digital Output Selection
PCM
Audio
Stream on
Blu-ray Disc
Audio
Stream on
DVD
Definition for
Blu-ray Disc
Bitstream
(Re-encoded DTS)
Bitstream
(Re-encoded
Dolby D)
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
PCM
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM 7.1ch
Dolby Digital Plus
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby
TrueHD
Up to PCM 7.1ch
Dolby TrueHD
DTS re-encoded
Re-encoded
Dolby Digital *
DTS
Up to PCM 7.1ch
DTS
DTS re-encoded
Re-encoded
Dolby Digital *
DTSHD High
Resolution
Audio
Up to PCM 7.1ch
DTS-HD High
Resolution Audio
DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD
Master
Audio
Up to PCM 7.1ch
DTS-HD Master
Audio
DTS re-encoded
Re-encoded
Dolby Digital *
PCM
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Dolby Digital
DTS
Up to PCM 7.1ch
DTS
DTS
DTS
Any
Appendix
Connection
Bitstream
(Unprocessed)
07
Setup
Decodes the main
Outputs only the
Decodes the main
feature audio and
main feature audio
feature audio and
Decodes the main
BONUSVIEW audio
stream so that your BONUSVIEW audio
feature audio and
stream together
AV receiver can
stream together
BONUSVIEW audio
into PCM audio and
decode the audio
into PCM audio and
stream together
adds Navigation
bitstream.
adds Navigation
into PCM audio and
Sound Effects, then
You will not hear
Sound Effects, then
adds Navigation
re-encodes the PCM
BONUSVIEW audio
re-encodes the
Sound Effects.
audio into Dolby
or Navigation Sound PCM audio into DTS
Digital bitstream or
Effects.
bitstream.
PCM.
 If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
English
HT-F9750W-XY-0604.indd 55
55 |
2013-06-04 오전 10:10:37
Appendix
Resolution according to the contents type
Contents Type
Setup
BD Wise
Blu-ray Disc
E-contents/
Digital contents
Resolution of Blu-ray Disc
1080p@60F
UHD Output : Auto
2160p@24F
2160p@24F
UHD Output : Off
1080p@24F
1080p@24F
Movie Frame : Auto
Auto
Max. Resolution of TV input
Max. Resolution of TV input
Movie Frame : Auto (24Fs)
 1080p & 1080i only
Movie Frame : Off
1080p@24F
1080p@24F
1080p
1080p@60F
1080p@60F
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
Contents Type
Setup
BD Wise
DVD
480i
UHD Output : Auto
2160p@24F
UHD Output : Off
1080p@24F
DVD 24fps Conversion : Auto
Movie Frame : Auto
Auto
DVD 24fps Conversion : Off
Movie Frame : Off
Max. Resolution of TV input
Max. Resolution of TV input
Movie Frame : Auto (DVD 24fps Conversion : Auto)
 1080p & 1080i only
1080p@24F
1080p
1080p@60F
1080i
1080i
720p
720p
576p/480p
576p/480p
| NOTES |
If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message
"If no pictures are shown after selecting Yes, please wait for 15 seconds to return to the previous resolution. Do you
want to change the resolution?" appears. If you select Yes, the TV's screen will go to blank for 15 seconds, and then
the resolution will revert to the previous resolution automatically.
If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the 5
button on the top of the product for more than 5 seconds. All settings are restored to the factory default. Run the
Initial Settings procedure again. Then, go to Settings > Display > Resolution in the Menu, and select the correct
resolution for your TV.
When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only.
Resetting does not affect your network settings, so you should be able to skip Network Setup and Software Update.
When the factory default settings are restored, all stored user BD data will be deleted.
The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode.
| 56 English
HT-F9750W-XY-0604.indd 56
2013-06-04 오전 10:10:38
Troubleshooting
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• The home cinema does not play sound during fast playback, slow playback,and
step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all 8.
•
•
•
•
Dolby Digital 7.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround
Sound is produced only if the disc is recorded with 7.1 channel sound.
• Is the audio language correctly set to Dolby Digital 7.1-CH in the information
display?
The remote control does
not work.
• Are you operating the remote within its operational range and within the proper
angle relative to the sensor?
• Are the batteries drained?
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
correctly?
• The disc is rotating but
no picture is produced.
• Picture quality is poor
and the picture is
shaking.
•
•
•
•
Audio language and
subtitles do not work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does
not appear even when the
menu function is selected.
• Are you using a disc that does not contain menus?
On certain Blu-ray/DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When listening to a CD, radio or TV, sound is output to the front speakers only.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
English
HT-F9750W-XY-0604.indd 57
Appendix
Symptom
07
Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, turn off the product, disconnect the power cord and contact the nearest
authorized dealer or Samsung Electronics Service Centre.
57 |
2013-06-04 오전 10:10:39
Appendix
Symptom
Check/Remedy
The aspect ratio cannot be
changed.
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer
to the Blu-ray Disc jacket and then select the appropriate function.
• The product is not
working.
(Example: The power
goes out or a strange
noise is heard.)
• The Product is not working
normally.
• Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's 5 button for longer
than 5 seconds. INIT appears on the display and all settings will return to the
default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
• If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
audio is muted.
"Not Available" appears on
screen.
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc
in the product. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
| 58 English
HT-F9750W-XY-0604.indd 58
2013-06-04 오전 10:10:39
Symptom
Check/Remedy
07
AllShare function
• AllShare only shows Video, Photo, and Music files. Other types of files are not
displayed.
Video is played
intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not
overloaded.
• The wireless connection between the DLNA compatible device and the product is
unstable.
Check the connection.
The AllShare connection
between the product and
PC is unstable.
• IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
Appendix
I can see folders shared
through AllShare, but I
cannot see the files.
BD-LIVE
I cannot connect to the
BD-LIVE server.
• Test whether the network connection is active by using the Network Status
function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 53)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 53)
| NOTES |
When the factory default settings are restored, all stored user BD data will be deleted.
English
HT-F9750W-XY-0604.indd 59
59 |
2013-06-04 오전 10:10:40
Appendix
Specifications
Weight
3.30 kg
Dimensions
430.00 (W) x 55.00 (H) x 314.50 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
Video
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3)
Front Top speaker output
165W x 2(3)
Centre speaker output
170W(3)
Surround speaker output
165W x 2(3)
Subwoofer speaker output
170W(3)
General
FM Tuner
HDMI
Amplifier
Analogue input : 20Hz~20kHz (±3dB)
Frequency response
Digital input : 20Hz~40kHz (±4dB)
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
| 60 English
HT-F9750W-XY-0604.indd 60
2013-06-04 오전 10:10:40
Speaker (7.1ch speaker system)
Impedance
Frequency Output sound Rated
range
pressure level input
Maximum
input
140Hz~
20kHz
Surround
165W
87dB/W/M
Centre
Subwoofer
•
•
•
•
•
170W
88dB/W/M
90.0 x 1302.0 x 70.0
(Stand base: 250 x 250)
7.65
90.0 x 1252.0 x 70.0
(Stand base: 250 x 250)
6.82
360.0 x 70.0 x 65.9
0.98
205.6 x 390.6 x 350.6
6.33
330W
3
40Hz ~
160Hz
Weights
(Unit : kg)
Appendix
Front/
Front Top
Dimensions
(W x H x D) (Unit : mm)
07
Speaker
system
340W
Network speeds equal to or below 10Mbps are not supported.
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
SWA-6000
Weight
1.1 kg
Dimensions (W x H x D)
76.2 x 228.6 x 152.4 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Output
165W x 2 CH
Frequency range
20Hz~20KHz
S/N Ratio
65dB
English
HT-F9750W-XY-0604.indd 61
61 |
2013-06-04 오전 10:10:41
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Area
Contact Centre 
` Asia Pacific
AUSTRALIA
1300 362 603
NEW ZEALAND 0800 SAMSUNG (0800 726 786)
CHINA
400-810-5858
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
(852) 3698 4698
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
0120-327-527
1800-88-9999
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
(Chinese)
www.samsung.com/hk_en
(English)
Area
PHILIPPINES
SINGAPORE
www.samsung.com/in
THAILAND
www.samsung.com/id
TAIWAN
www.samsung.com
www.samsung.com/my
VIETNAM
Contact Centre 
Web Site
1-800-10-SAMSUNG (726-7864) for
PLDT
1-800-3-SAMSUNG (726-7864) for
Digitel
1-800-8-SAMSUNG (726-7864) for
Globe
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
www.samsung.com/ph
www.samsung.com
www.samsung.com/th
www.samsung.com
www.samsung.com
AH68-02630R-02
HT-F9750W-XY-0604.indd 62
2013-06-04 오전 10:10:41