Bosch UNPC Series Instruction manual

UNPM, UNPC, UNPDN, and UNPXF Series
Outdoor model shown
Instruction Manual
EN Unity® Prepackaged
Cameras
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Important Safeguards
EN | 2
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
4. Installation Cautions - Do not place this unit on an
unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury to a person and
serious damage to the unit. Use only manufacturerrecommended accessories, or those sold with the
product. Mount the unit per the manufacturer's
instructions. Appliance and cart combination should
be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Cleaning - Unplug the unit from the outlet before
cleaning. Follow any instructions provided with the
unit. Generally, using a damp cloth for cleaning is
sufficient. Do not use liquid cleaners or aerosol
cleaners.
6. Servicing - Do not attempt to service this unit
yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from
the main AC power source and refer servicing to
qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen
into the unit.
• If the unit has been exposed to water and/or
inclement weather (rain, snow, etc.).
• If the unit does not operate normally, when
following the operating instructions. Adjust only
those controls specified in the operating
instructions. Improper adjustment of other controls
may result in damage, and require extensive work
by a qualified technician to restore the unit to
normal operation.
• If the unit has been dropped or the cabinet
damaged.
• If the unit exhibits a distinct change in
performance, this indicates that service is needed.
8. Replacement Parts - When replacement parts are
required, the service technician should use
replacement parts specified by the manufacturer or
that have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electrical shock or other hazards.
9. Safety Check - Upon completion of servicing or
repairs to the unit, ask the service technician to
perform safety checks to ensure proper operating
condition.
Bosch Security Systems | May 5, 2006
10. Power Sources - Operate the unit only from the type
of power source indicated on the label. If unsure of
the type of power supply to use, contact your dealer
or local power company.
• For units intended to operate from battery power,
refer to the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved
power supplies.
• For units intended to operate with a limited power
source, this power source must comply with
EN60950. Substitutions may damage the unit or
cause fire or shock.
• For units intended to operate at 24VAC, normal
input voltage is 24VAC. Voltage applied to the
unit's power input should not exceed 30VAC.
User-supplied wiring, from the 24VAC supply to
unit, must be in compliance with electrical codes
(Class 2 power levels). Do not ground the 24VAC
supply at the terminals or at the unit's power
supply terminals.
11. Coax Grounding - If an outside cable system is
connected to the unit, ensure that the cable system is
grounded. U.S.A. models only - Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information regarding proper grounding of
the mount and supporting structure, grounding of the
coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
12.Grounding - This unit may be equipped with a 3-wire
grounding plug (a plug with a third pin, for grounding).
This safety feature allows the plug to fit into a
grounding power outlet only. If unable to insert the
plug into the outlet, contact an electrician to arrange
replacement of the obsolete outlet. Do not defeat the
safety purpose of the grounding plug.
• Outdoor equipment should only be connected to
the unit's inputs after this unit has had its
grounding plug connected to a grounded outlet or
its ground terminal properly connected to a ground
source.
• The unit's input connectors must be disconnected
from outdoor equipment before disconnecting the
grounding plug or grounding terminal.
• Proper safety precautions such as grounding should
be followed for any outdoor device connected to
this unit.
13. Lightning - For added protection during a lightning
storm, or when this unit is left unattended and
unused for long periods of time, unplug the unit from
the wall outlet and disconnect the cable system. This
will prevent damage to the unit due to lightning and
power line surges.
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Safety Precautions
For Indoor Product
1. Water and Moisture - Do not use this unit near
water - for example, in a wet basement, in an
unprotected outdoor installation or in any area
classified as a wet location.
2. Object and Liquid Entry - Never push objects of
any kind into this unit through openings, as they
might touch dangerous voltage points or create
short circuits, resulting in a fire or electrical
shock. Never spill liquid of any kind on the unit.
3. Power Cord and Power Cord Protection - For
units intended to operate with 230VAC, 50Hz,
the input and output power cord must comply
with the latest versions of IEC Publication 227 or
IEC Publication 245.
Power supply cords should be routed so they are
not likely to be walked on or pinched. Pay
particular attention to location of cords and plugs,
convenience receptacles, and the point of exit
from the appliance.
4. Overloading - Do not overload outlets and
extension cords; this can result in a risk of fire or
electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines,
electric lights or power circuits, or where it may
contact such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching power lines or
circuits, as this contact might be fatal. U.S.A.
models only - refer to the National Electrical
Code Article 820 regarding installation of CATV
systems.
For Rack-mount Product
1. Ventilation - Do not place this equipment in a
built-in installation or rack, unless proper
ventilation is provided, or the manufacturer's
instructions were followed. The equipment must
not exceed its maximum operating temperature
requirements.
2. Mechanical Loading - When rack-mounting the
equipment, ensure that a hazardous condition is
not created by uneven mechanical loading.
Bosch Security Systems | May 5, 2006
EN | 3
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that can cause an electric
shock.
This symbol indicates the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Installation should be performed by qualified
service personnel only in accordance with the
National Electrical Code or applicable local
codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | FCC & ICES Information
FCC & ICES INFORMATION
EN | 4
Sicherheitshinweise
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and radiates radio
frequency energy, and if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his
expense.
Intentional or unintentional changes or modifications, not
expressly approved by the party responsible for compliance, shall
not be made. Any such changes or modifications could void the
user’s authority to operate the equipment. If necessary, the user
should consult the dealer or an experienced radio/television
technician for corrective action. The user may find the following
booklet, prepared by the Federal Communications Commission,
helpful: How to Identify and Resolve Radio-TV Interference
Problems. This booklet is available from the U.S. Government
Printing Office, Washington, DC 20402, Stock No.
004-000-00345-4.
WARNING: This is a Class A product. In a domestic
environment, this product may cause radio interference,
in which case, the user may be required to take adequate
measures.
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN
KÖNNEN. LASSEN SIE WARTUNGSARBEITEN NUR VON
QUALIFIZIERTEM WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung"
im Gehäuse aufmerksam. Dies kann zu einem elektrischen
Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für
die Bedienung und Instandhaltung (Wartung) in den
begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne
Netzschalter haben Spannung am Gerät anliegen, sobald der
Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch
nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN
steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist
die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA
ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE
POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL
INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO
CUALIFICADO SE ENCARGA DE REALIZAR LAS
REPARACIONES.
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension
potentiellement dangereuse » non isolée susceptible de
provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions
d'utilisation et d'entretien (dépannage) reprises dans la
documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du
personnel qualifié, conformément au code national d'électricité
américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un
commutateur ON/OFF, tous les appareils reçoivent de l'énergie une
fois le cordon branché sur la source d'alimentation. Toutefois,
l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon
d'alimentation permet de couper l'alimentation des appareils.
Bosch Security Systems | May 5, 2006
Este símbolo indica que existen puntos de tensión peligrosos
sin aislamiento dentro de la cubierta de la unidad. Estos
puntos pueden constituir un riesgo de descarga eléctrica.
El usuario debe consultar las instrucciones de funcionamiento y
mantenimiento (reparación) en la documentación que se
suministra con el aparato.
Atención: la instalación la debe realizar únicamente personal
cualificado de conformidad con el National Electric Code o las
normas aplicables en su país.
Desconexión de la alimentación. Las unidades con o sin
interruptores de encendido/apagado reciben alimentación
eléctrica siempre que el cable de alimentación esté conectado a
la fuente de alimentación. Sin embargo, la unidad sólo funciona
cuando el interruptor está en la posición de encendido. El cable
de alimentación es la principal fuente de desconexión de todas
las unidades.
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Safety Precautions
Veiligheidsmaatregelen
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT
VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO
OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT
BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT
REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN
DOOR GEKWALIFICEERD PERSONEEL.
EN | 5
Medidas de Segurança
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Dit symbool geeft aan dat er binnen in het apparaat
ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk
elektrische schokken kan veroorzaken.
Este símbolo indica a presença de "tensão perigosa" não isolada
dentro da estrutura do produto, o que pode constituir risco de
choque eléctrico.
De gebruiker dient de bedienings- en onderhoudsvoorschriften
te raadplegen in de documentatie die werd meegeleverd met
het apparaat.
O utilizador deve consultar as instruções de funcionamento
e manutenção (assistência) nos documentos que
acompanham o aparelho.
Attentie: het apparaat mag alleen door gekwalificeerd personeel
worden geïnstalleerd. De installatie dient in overeenstemming
met de nationale elektrische richtlijnen of de van toepassing
zijnde lokale richtlijnen te worden uitgevoerd.
Spanning uitschakelen. Apparatuur met of zonder
aan-uitschakelaar staat onder spanning zolang de stekker is
aangesloten op de wandcontactdoos. De apparatuur is uitsluitend
in werking als de aan-uitschakelaar aan staat. Het netsnoer is de
"hoofdschakelaar" voor alle apparatuur.
Sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL
PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE
COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER
QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE
TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non
isolata all'interno del contenitore del prodotto. Ciò comporta un
potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di
manutenzione (interventi tecnici) contenute nella
documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente
da personale tecnico qualificato in conformità con il National
Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di
interruttori ON-OFF vengono alimentate quando si inserisce il
cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione
solo quando l'interruttore ON-OFF si trova nella posizione ON. Il
cavo di alimentazione costituisce il dispositivo di scollegamento
dell'alimentazione principale per tutte le unità.
Bosch Security Systems | May 5, 2006
Atenção: a instalação deve ser executada apenas por técnicos
qualificados da assistência, de acordo com o código eléctrico
nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores
ON-OFF (ligar/desligar) recebem corrente sempre que o fio de
alimentação está introduzido na fonte de alimentação; contudo, a
unidade apenas está operacional quando o interruptor ON-OFF
está na posição ON. O fio de alimentação destina-se a desligar a
corrente em todas as unidades.
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Contents
EN | 6
Table of Contents
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.0
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
1.1
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.0
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.0
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3.1
Model Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.0
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.2
Preparing the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.3
Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.4
Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.5
Line Power and Video Signal Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.6
Connections for F Suffix and N Suffix Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.0
CAMERA/LENS ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.0
SUNSHIELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
7.0
APPENDIX A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7.1
Model Numbers and System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Bosch Security Systems | May 5, 2006
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Unpacking
1.0
UNPACKING
EN | 7
2.0 SERVICE
This equipment should be unpacked and handled with
care. If an item appears to have been damaged in
shipment, notify the shipper.
If the unit needs servicing, contact the nearest Bosch
Security Systems Service Center for authorization to
return and shipping instructions.
Verify that all parts shown in the Parts List have been
included. If any items are missing, notify your Bosch
Security Systems Sales or Customer Service
Representative.
Service Centers
The original packing carton is the safest container in
which to transport the unit. Save it for possible future use.
1.1
Parts List
Qty
Item
1
Unit (verify package model number ordered)
1
Feed-through mount
1
Instruction booklet packet
Refer to APPENDIX A for a detailed list of the
Camera, Lens, Housing, and Feed-through Mount
model numbers included with the various package
model numbers.
Bosch Security Systems | May 5, 2006
USA
Phone:
800-366-2283 / 585-340-4162
fax:
800-366-1329
e-mail:
cctv.repair@us.bosch.com
CCTV Spare Parts
Phone:
800-894-5215 / 408-957-3065
fax:
408-935-5938
e-mail:
BoschCCTVparts@ca.slr.com
Canada
Phone:
514-738-2434
fax:
514-738-8480
Europe, Middle East & Asia Pacific Region
Phone:
44 (0) 1495 274558
fax:
44 (0) 1495 274280
email:
rmahelpdesk@solectron.com
For additional information, see
www.boschsecurity.com.
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Description
3.0
DESCRIPTION
The UNPM Series, UNPC Series, UNPDN Series,
and UNPXF Series are complete camera packages that
include a camera/lens pre-wired into a housing. A
feed-through wall mount is also provided, as well as a
sunshield on outdoor packages.
3.1
Model Summary
Refer to APPENDIX A for the resolution, lens, and
system specifications for the various package models.
4.5
INSTALLATION
WARNING: This installation should be made
by a qualified service person and conform to
all local codes.
4.1
Line Power and Video Signal
Connection
The external video coax cable is equipped with a
female BNC connector for transmission of video.
Route and connect video cable to the BNC connector.
The external power cable is provided to allow for
necessary stripping/preparation by the installer. For
additional information, refer to the Installation
Manuals included in the Instruction Booklet Packet.
4.6
4.0
EN | 8
Connections for F Suffix and
N suffix Cameras
The connections for models containing fiber optic or
twisted pair interfaces are covered in a separate
Installation Instruction Addendum that is provided
with those model types.
Operating Voltage
All Recommended operating voltage is
24 VAC, 60 Hz.
5.0
4.2
The camera and lens come factory configured and
ready for operation. If custom setup is required, refer
to the camera Installation Instructions included in the
Instruction Booklet Packet.
Preparing the Unit
Remove the mount and the housing assembly from the
carton.
4.3
Mount
Prepare and secure the mount to the wall or mounting
surface as described in the LTC 9215/00 Installation
Manual included in the Instruction Booklet Packet.
4.4
Housing
Feed the cabling from the housing foot through the
mount. Attach the housing to the mount using the
two (2) M6 screws and washers provided in the
hardware kit. For additional information, refer to
the LTC 9215/00 Mount Installation Manual and
HSG9483 Series Housing Installation Manual.
CAMERA/LENS
ADJUSTMENT
Outdoor models that include the LTC 3374/50
5-50 mm lens are supplied with a lens support bracket
that protects the lens during shipment. If necessary,
this bracket can be removed to allow access for lens
adjustment. To remove the bracket, cut the cable tie
and remove the screw as shown in the photo below.
6.0
SUNSHIELD
A sunshield is provided with the outdoor packages.
Bosch Security Systems | May 5, 2006
EN | 9
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Appendix A
7.0
7.1
APPENDIX A
Model Numbers and System Specifications
Package Model No. Camera
Lens
Housing
Mount
Sunshield
Resolution
Included Lens
LTC 9480/00
LTC 9215/00S
---
380
2.8-10 mm Vari-focal
System
MONOCHROME 1/3 in. STANDARD RESOLUTION
UNPMS28
LTC 0335/20
LTC 3364/50
Indoor, Monochrome
EIA, 24 VAC, 60 Hz
UNPMS28E
LTC 0335/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
380
2.8-10 mm Vari-focal
Outdoor, Monochrome
UNPMS55
LTC 0335/20
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
380
5-50 mm Vari-focal
Indoor, Monochrome
UNPMS55E
LTC 0335/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
380
5-50 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
MONOCHROME 1/3 in. HIGH RESOLUTION
UNPMH28
LTC 0355/20
LTC 3364/50
LTC 9480/00
LTC 9215/00S
---
570
2.8-10 mm Vari-focal
Indoor, Monochrome
EIA, 24 VAC, 60 Hz
UNPMH28E
LTC 0355/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
570
2.8-10 mm Vari-focal
Outdoor, Monochrome
UNPMH55
LTC 0355/20
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
570
5-50 mm Vari-focal
Indoor, Monochrome
UNPMH55E
LTC 0355/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
570
5-50 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
MONOCHROME 1/3 in. HIGH RESOLUTION, HIGH SENSITIVITY
UNPXFMH28
LTC 0385/20
LTC 3364/50
LTC 9480/00
LTC 9215/00S
---
570
2.8-10 mm Vari-focal
Indoor, Monochrome
UNPXFMH28E
LTC 0385/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
570
2.8-10 mm Vari-focal
Outdoor, Monochrome
UNPXFMH28EF
LTC 0385/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
570
2.8-10 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz,
w/Fiber
UNPXFMH28EN
LTC 0385/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
570
2.8-10 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz,
w/UTP
UNPXFMH55
LTC 0385/20
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
570
5-50 mm Vari-focal
Indoor, Monochrome
UNPXFMH55E
LTC 0385/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
570
5-50 mm Vari-focal
Outdoor, Monochrome
UNPXFMH55EF
LTC 0385/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
570
5-50 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz,
w/Fiber
UNPXFMH55EN
LTC 0385/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
570
5-50 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz,
w/UTP
MONOCHROME 1/2 in. HIGH RESOLUTION, ULTIMATE SENSITIVITY
UNPXF2MH75E
LTC 0510/20
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
570
7.5-75 mm Vari-focal
Outdoor, Monochrome
UNPXF2MH75EF
LTC 0510/20
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
570
7.5-75 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz,
w/Fiber
UNPXF2MH75EN
LTC 0510/20
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
570
7.5-75 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz,
w/UTP
UNPXF2MH410E
LTC 0510/20
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
570
4-12 mm Vari-focal
Outdoor, Monochrome
UNPXF2MH410EF
LTC 0510/20
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
570
4-12 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz
EIA, 24 VAC, 60 Hz,
w/Fiber
UNPXF2MH410EN
LTC 0510/20
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
570
4-12 mm Vari-focal
Outdoor, Monochrome
EIA, 24 VAC, 60 Hz,
w/UTP
Note 1: Sunshield included with housing.
Bosch Security Systems | May 5, 2006
EN | 10
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Appendix A
Package Model No. Camera
Lens
Housing
Mount
Sunshield
Resolution
Included Lens
LTC 9480/00
LTC 9215/00S
---
330
2.8-10 mm Vari-focal
System
COLOR 1/3 in. STANDARD RESOLUTION
UNPCS28
LTC 0435/20
LTC 3364/50
Indoor, Color NTSC,
24 VAC, 60 Hz
UNPCS28E
LTC 0435/20
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
330
2.8-10 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
UNPCS55
LTC 0435/20
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
330
5-50 mm Vari-focal
Indoor, Color NTSC,
UNPCS55E
LTC 0435/20
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
330
5-50 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
24 VAC, 60 Hz
COLOR 1/3 in. HIGH RESOLUTION
UNPCH28
LTC 0455/21
LTC 3364/50
LTC 9480/00
LTC 9215/00S
---
540
2.8-10 mm Vari-focal
Indoor, Color NTSC,
24 VAC, 60 Hz
UNPCH28E
LTC 0455/21
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
540
2.8-10 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
UNPCH55
LTC 0455/21
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
540
5-50 mm Vari-focal
Indoor, Color NTSC,
24 VAC, 60 Hz
UNPCH55E
LTC 0455/21
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
540
5-50 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
COLOR 1/3 in. HIGH RESOLUTION, HIGH SENSITIVITY
UNPXFCH28
LTC 0485/21
LTC 3364/50
LTC 9480/00
LTC 9215/00S
---
540
2.8-10 mm Vari-focal
Indoor, Color NTSC,
24V AC, 60 Hz
UNPXFCH28E
LTC 0485/21
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
540
2.8-10 mm Vari-focal
Outdoor, Color NTSC,
UNPXFCH28EF
LTC 0485/21
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
540
2.8-10 mm Vari-focal
Outdoor, Color NTSC,
UNPXFCH28EN
LTC 0485/21
LTC 3364/50
HSG9483/21
LTC 9215/00
See Note 1
540
2.8-10 mm Vari-focal
Outdoor, Color NTSC,
UNPXFCH55
LTC 0485/21
LTC 3374/50
LTC 9480/00
LTC 9215/00S
---
540
5-50 mm Vari-focal
24 VAC, 60 Hz
24 VAC, 60 Hz, w/Fiber
24 VAC, 60 Hz, w/UTP
Indoor, Color NTSC,
24V AC, 60 Hz
UNPXFCH55E
LTC 0485/21
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
540
5-50 mm Vari-focal
Outdoor, Color NTSC,
UNPXFCH55EF
LTC 0485/21
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
540
5-50 mm Vari-focal
Outdoor, Color NTSC,
UNPXFCH55EN
LTC 0485/21
LTC 3374/50
HSG9483/21
LTC 9215/00
See Note 1
540
5-50 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
24 VAC, 60 Hz, w/Fiber
24 VAC, 60 Hz, w/UTP
COLOR 1/2 in. HIGH RESOLUTION, ULTIMATE SENSITIVITY
UNPXF2CH75E
LTC 0610/21
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
540
7.5-75 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz
UNPXF2CH75EF
LTC 0610/21
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
540
7.5-75 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz, w/Fiber
UNPXF2CH75EN
LTC 0610/21
LTC 3274/41
HSG9483/21
LTC 9215/00
See Note 1
540
7.5-75 mm Vari-focal
Outdoor, Color NTSC,
24 VAC, 60 Hz, w/UTP
UNPXF2CH410E
LTC 0610/21
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
540
4-12 mm Vari-focal,
Outdoor, Color NTSC,
IR Corrected
24 VAC, 60 Hz
Outdoor, Color NTSC,
UNPXF2CH410EF
LTC 0610/21
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
540
4-12 mm Vari-focal,
IR Corrected
24 VAC, 60 Hz, w/Fiber
UNPXF2CH410EN
LTC 0610/21
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
540
4-12 mm Vari-focal,
Outdoor, Color NTSC,
IR Corrected
24 VAC, 60 Hz, w/UTP
Note 1: Sunshield included with housing.
Bosch Security Systems | May 5, 2006
EN | 11
UNPM, UNPC, UNPDN, UNPXF Series | Instruction Manual | Appendix A
Package Model No. Camera
Lens
Housing
Mount
Sunshield
Resolution
LTC 9215/00S
---
540
Included Lens
System
DAY/NIGHT 1/3 in. HIGH RESOLUTION, HIGH SENSITIVITY
UNPDN28
UNPDN28E
UNPDN28EF
LTC 0495/21
LTC 0495/21
LTC 0495/21
LTC 3664/40
LTC 3664/40
LTC 3664/40
LTC 9480/00
HSG9483/21
HSG9483/21
LTC 9215/00
LTC 9215/00
See Note 1
See Note 1
540
540
2.8-11 mm Vari-focal,
Indoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
2.8-11 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
2.8-11 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/Fiber
UNPDN28EN
LTC 0495/21
LTC 3664/40
HSG9483/21
LTC 9215/00
See Note 1
540
2.8-11 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/UTP
UNPDN55
UNPDN55E
UNPDN55EF
LTC 0495/21
LTC 0495/21
LTC 0495/21
F01U005600
F01U005600
F01U005600
LTC 9480/00
HSG9483/21
HSG9483/21
LTC 9215/00S
LTC 9215/00
LTC 9215/00
--See Note 1
See Note 1
540
540
540
5-50 mm Vari-focal,
Indoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
5-50 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
5-50 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/Fiber
UNPDN55EN
LTC 0495/21
F01U005600
HSG9483/21
LTC 9215/00
See Note 1
540
5-50 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/UTP
DAY/NIGHT 1/2 in. HIGH RESOLUTION, ULTIMATE SENSITIVITY
UNP2DN104E
UNP2DN104EF
LTC 0620/21
LTC 0620/21
LTC 3774/30
LTC 3774/30
HSG9483/21
HSG9483/21
LTC 9215/00
LTC 9215/00
See Note 1
See Note 1
540
540
10-40 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
10-40 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/Fiber
UNP2DN104EN
LTC 0620/21
LTC 3774/30
HSG9483/21
LTC 9215/00
See Note 1
540
10-40 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/UTP
UNP2DN410E
UNP2DN410EF
LTC 0620/21
LTC 0620/21
LTC 3764/20
LTC 3764/20
HSG9483/21
HSG9483/21
LTC 9215/00
LTC 9215/00
See Note 1
See Note 1
540
540
4-12 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz
4-12 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/Fiber
UNP2DN410EN
LTC 0620/21
LTC 3764/20
HSG9483/21
LTC 9215/00
See Note 1
540
4-12 mm Vari-focal,
Outdoor, Day/Night
IR Corrected
NTSC, 24 VAC, 60 Hz,
w/UTP
Note 1: Sunshield included with housing.
Bosch Security Systems | May 5, 2006
Americas
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 (585) 223 4060
+1 800 289 0096
security.sales@us.bosch.com
http://www.boschsecurity.us
Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: +31 (0) 40 27 83955
Fax:
+31 (0) 40 27 86668
emea.securitysystems@bosch.com
http://www.boschsecurity.com
© 2006 Bosch Security Systems
F01U008521_06 06-18 | Updated May 5, 2006 | Data subject to change without notice.
Asia-Pacific
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax:
+65 6319 3499
apr.securitysystems@bosch.com
http://www.boschsecurity.com